diff options
| author | Don Skidmore <donald.c.skidmore@intel.com> | 2010-12-03 13:23:30 +0000 |
|---|---|---|
| committer | David S. Miller <davem@davemloft.net> | 2010-12-06 13:18:50 -0800 |
| commit | a7f5a5fcd9f13afd3471a0de8c1fdaa8f989497c (patch) | |
| tree | f209c677d351b228dd6be42d50b21d814abb933d /drivers/net/ixgbe | |
| parent | 8917a3c0b7d1557548f50bfe3f0e18e0354e38f6 (diff) | |
| download | kernel_samsung_tuna-a7f5a5fcd9f13afd3471a0de8c1fdaa8f989497c.zip kernel_samsung_tuna-a7f5a5fcd9f13afd3471a0de8c1fdaa8f989497c.tar.gz kernel_samsung_tuna-a7f5a5fcd9f13afd3471a0de8c1fdaa8f989497c.tar.bz2 | |
ixgbe: fix for link failure on SFP+ DA cables
This patch helps prevent FW/SW semaphore collision from leading
to link establishment failure. The collision might mess up the
PHY registers so we reset the PHY. However there are SFI/KR areas
in the PHY that are not reset with a Reset_AN so we need to change
LMS to reset it. Also wait until AN state machine is AN_GOOD
Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/ixgbe')
| -rw-r--r-- | drivers/net/ixgbe/ixgbe_82599.c | 28 | ||||
| -rw-r--r-- | drivers/net/ixgbe/ixgbe_type.h | 3 |
2 files changed, 28 insertions, 3 deletions
diff --git a/drivers/net/ixgbe/ixgbe_82599.c b/drivers/net/ixgbe/ixgbe_82599.c index 385cceb..6827ddd 100644 --- a/drivers/net/ixgbe/ixgbe_82599.c +++ b/drivers/net/ixgbe/ixgbe_82599.c @@ -96,6 +96,8 @@ static void ixgbe_init_mac_link_ops_82599(struct ixgbe_hw *hw) static s32 ixgbe_setup_sfp_modules_82599(struct ixgbe_hw *hw) { s32 ret_val = 0; + u32 reg_anlp1 = 0; + u32 i = 0; u16 list_offset, data_offset, data_value; if (hw->phy.sfp_type != ixgbe_sfp_type_unknown) { @@ -122,14 +124,34 @@ static s32 ixgbe_setup_sfp_modules_82599(struct ixgbe_hw *hw) IXGBE_WRITE_FLUSH(hw); hw->eeprom.ops.read(hw, ++data_offset, &data_value); } - /* Now restart DSP by setting Restart_AN */ - IXGBE_WRITE_REG(hw, IXGBE_AUTOC, - (IXGBE_READ_REG(hw, IXGBE_AUTOC) | IXGBE_AUTOC_AN_RESTART)); /* Release the semaphore */ ixgbe_release_swfw_sync(hw, IXGBE_GSSR_MAC_CSR_SM); /* Delay obtaining semaphore again to allow FW access */ msleep(hw->eeprom.semaphore_delay); + + /* Now restart DSP by setting Restart_AN and clearing LMS */ + IXGBE_WRITE_REG(hw, IXGBE_AUTOC, ((IXGBE_READ_REG(hw, + IXGBE_AUTOC) & ~IXGBE_AUTOC_LMS_MASK) | + IXGBE_AUTOC_AN_RESTART)); + + /* Wait for AN to leave state 0 */ + for (i = 0; i < 10; i++) { + msleep(4); + reg_anlp1 = IXGBE_READ_REG(hw, IXGBE_ANLP1); + if (reg_anlp1 & IXGBE_ANLP1_AN_STATE_MASK) + break; + } + if (!(reg_anlp1 & IXGBE_ANLP1_AN_STATE_MASK)) { + hw_dbg(hw, "sfp module setup not complete\n"); + ret_val = IXGBE_ERR_SFP_SETUP_NOT_COMPLETE; + goto setup_sfp_out; + } + + /* Restart DSP by setting Restart_AN and return to SFI mode */ + IXGBE_WRITE_REG(hw, IXGBE_AUTOC, (IXGBE_READ_REG(hw, + IXGBE_AUTOC) | IXGBE_AUTOC_LMS_10G_SERIAL | + IXGBE_AUTOC_AN_RESTART)); } setup_sfp_out: diff --git a/drivers/net/ixgbe/ixgbe_type.h b/drivers/net/ixgbe/ixgbe_type.h index ef816dd..0f80893 100644 --- a/drivers/net/ixgbe/ixgbe_type.h +++ b/drivers/net/ixgbe/ixgbe_type.h @@ -1470,6 +1470,8 @@ #define IXGBE_ANLP1_PAUSE 0x0C00 #define IXGBE_ANLP1_SYM_PAUSE 0x0400 #define IXGBE_ANLP1_ASM_PAUSE 0x0800 +#define IXGBE_ANLP1_AN_STATE_MASK 0x000f0000 + /* SW Semaphore Register bitmasks */ #define IXGBE_SWSM_SMBI 0x00000001 /* Driver Semaphore bit */ @@ -2641,6 +2643,7 @@ struct ixgbe_info { #define IXGBE_ERR_NO_SPACE -25 #define IXGBE_ERR_OVERTEMP -26 #define IXGBE_ERR_RAR_INDEX -27 +#define IXGBE_ERR_SFP_SETUP_NOT_COMPLETE -30 #define IXGBE_ERR_PBA_SECTION -31 #define IXGBE_ERR_INVALID_ARGUMENT -32 #define IXGBE_NOT_IMPLEMENTED 0x7FFFFFFF |