Merge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (40 commits)
  bonding/bond_main.c: make 2 functions static
  ps3: gigabit ethernet driver for PS3, take3
  [netdrvr] Fix dependencies for ax88796 ne2k clone driver
  eHEA: Capability flag for DLPAR support
  Remove sk98lin ethernet driver.
  sunhme.c:quattro_pci_find() must be __devinit
  bonding / ipv6: no addrconf for slaves separately from master
  atl1: remove write-only var in tx handler
  macmace: use "unsigned long flags;"
  Cleanup usbnet_probe() return value handling
  netxen: deinline and sparse fix
  eeprom_93cx6: shorten pulse timing to match spec (bis)
  phylib: Add Marvell 88E1112 phy id
  phylib: cleanup marvell.c a bit
  AX88796 network driver
  IOC3: Switch to pci refcounting safe APIs
  e100: Fix Tyan motherboard e100 not receiving IPMI commands
  QE Ethernet driver writes to wrong register to mask interrupts
  rrunner.c:rr_init() must be __devinit
  tokenring/3c359.c:xl_init() must be __devinit
  ...

1 files changed, 0 insertions, 1788 deletions

diff --git a/drivers/net/sk98lin/skaddr.c b/drivers/net/sk98lin/skaddr.c
deleted file mode 100644
index 6e6c56a..0000000
--- a/drivers/net/sk98lin/skaddr.c
+++ /dev/null
@@ -1,1788 +0,0 @@
-/******************************************************************************
- *
- * Name:	skaddr.c
- * Project:	Gigabit Ethernet Adapters, ADDR-Module
- * Version:	$Revision: 1.52 $
- * Date:	$Date: 2003/06/02 13:46:15 $
- * Purpose:	Manage Addresses (Multicast and Unicast) and Promiscuous Mode.
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- *	(C)Copyright 1998-2002 SysKonnect GmbH.
- *	(C)Copyright 2002-2003 Marvell.
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
- *	The information in this file is provided "AS IS" without warranty.
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- * Description:
- *
- * This module is intended to manage multicast addresses, address override,
- * and promiscuous mode on GEnesis and Yukon adapters.
- *
- * Address Layout:
- *	port address:		physical MAC address
- *	1st exact match:	logical MAC address (GEnesis only)
- *	2nd exact match:	RLMT multicast (GEnesis only)
- *	exact match 3-13:	OS-specific multicasts (GEnesis only)
- *
- * Include File Hierarchy:
- *
- *	"skdrv1st.h"
- *	"skdrv2nd.h"
- *
- ******************************************************************************/
-
-#if (defined(DEBUG) || ((!defined(LINT)) && (!defined(SK_SLIM))))
-static const char SysKonnectFileId[] =
-	"@(#) $Id: skaddr.c,v 1.52 2003/06/02 13:46:15 tschilli Exp $ (C) Marvell.";
-#endif /* DEBUG ||!LINT || !SK_SLIM */
-
-#define __SKADDR_C
-
-#ifdef __cplusplus
-extern "C" {
-#endif	/* cplusplus */
-
-#include "h/skdrv1st.h"
-#include "h/skdrv2nd.h"
-
-/* defines ********************************************************************/
-
-
-#define XMAC_POLY	0xEDB88320UL	/* CRC32-Poly - XMAC: Little Endian */
-#define GMAC_POLY	0x04C11DB7L	/* CRC16-Poly - GMAC: Little Endian */
-#define HASH_BITS	6				/* #bits in hash */
-#define	SK_MC_BIT	0x01
-
-/* Error numbers and messages. */
-
-#define SKERR_ADDR_E001		(SK_ERRBASE_ADDR + 0)
-#define SKERR_ADDR_E001MSG	"Bad Flags."
-#define SKERR_ADDR_E002		(SKERR_ADDR_E001 + 1)
-#define SKERR_ADDR_E002MSG	"New Error."
-
-/* typedefs *******************************************************************/
-
-/* None. */
-
-/* global variables ***********************************************************/
-
-/* 64-bit hash values with all bits set. */
-
-static const SK_U16	OnesHash[4] = {0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF};
-
-/* local variables ************************************************************/
-
-#ifdef DEBUG
-static int	Next0[SK_MAX_MACS] = {0};
-#endif	/* DEBUG */
-
-static int SkAddrGmacMcAdd(SK_AC *pAC, SK_IOC IoC, SK_U32 PortNumber,
-			   SK_MAC_ADDR *pMc, int Flags);
-static int SkAddrGmacMcClear(SK_AC *pAC, SK_IOC IoC, SK_U32 PortNumber,
-			     int Flags);
-static int SkAddrGmacMcUpdate(SK_AC *pAC, SK_IOC IoC, SK_U32 PortNumber);
-static int SkAddrGmacPromiscuousChange(SK_AC *pAC, SK_IOC IoC,
-				       SK_U32 PortNumber, int NewPromMode);
-static int SkAddrXmacMcAdd(SK_AC *pAC, SK_IOC IoC, SK_U32 PortNumber,
-			   SK_MAC_ADDR *pMc, int Flags);
-static int SkAddrXmacMcClear(SK_AC *pAC, SK_IOC IoC, SK_U32 PortNumber,
-			     int Flags);
-static int SkAddrXmacMcUpdate(SK_AC *pAC, SK_IOC IoC, SK_U32 PortNumber);
-static int SkAddrXmacPromiscuousChange(SK_AC *pAC, SK_IOC IoC,
-				       SK_U32 PortNumber, int NewPromMode);
-
-/* functions ******************************************************************/
-
-/******************************************************************************
- *
- *	SkAddrInit - initialize data, set state to init
- *
- * Description:
- *
- *	SK_INIT_DATA
- *	============
- *
- *	This routine clears the multicast tables and resets promiscuous mode.
- *	Some entries are reserved for the "logical MAC address", the
- *	SK-RLMT multicast address, and the BPDU multicast address.
- *
- *
- *	SK_INIT_IO
- *	==========
- *
- *	All permanent MAC addresses are read from EPROM.
- *	If the current MAC addresses are not already set in software,
- *	they are set to the values of the permanent addresses.
- *	The current addresses are written to the corresponding MAC.
- *
- *
- *	SK_INIT_RUN
- *	===========
- *
- *	Nothing.
- *
- * Context:
- *	init, pageable
- *
- * Returns:
- *	SK_ADDR_SUCCESS
- */
-int	SkAddrInit(
-SK_AC	*pAC,	/* the adapter context */
-SK_IOC	IoC,	/* I/O context */
-int		Level)	/* initialization level */
-{
-	int			j;
-	SK_U32		i;
-	SK_U8		*InAddr;
-	SK_U16		*OutAddr;
-	SK_ADDR_PORT	*pAPort;
-
-	switch (Level) {
-	case SK_INIT_DATA:
-		SK_MEMSET((char *) &pAC->Addr, (SK_U8) 0,
-            (SK_U16) sizeof(SK_ADDR));
-
-		for (i = 0; i < SK_MAX_MACS; i++) {
-			pAPort = &pAC->Addr.Port[i];
-			pAPort->PromMode = SK_PROM_MODE_NONE;
-			
-			pAPort->FirstExactMatchRlmt = SK_ADDR_FIRST_MATCH_RLMT;
-			pAPort->FirstExactMatchDrv = SK_ADDR_FIRST_MATCH_DRV;
-			pAPort->NextExactMatchRlmt = SK_ADDR_FIRST_MATCH_RLMT;
-			pAPort->NextExactMatchDrv = SK_ADDR_FIRST_MATCH_DRV;
-		}
-#ifdef xDEBUG
-		for (i = 0; i < SK_MAX_MACS; i++) {
-			if (pAC->Addr.Port[i].NextExactMatchRlmt <
-				SK_ADDR_FIRST_MATCH_RLMT) {
-				Next0[i] |= 4;
-			}
-		}
-#endif	/* DEBUG */
-		/* pAC->Addr.InitDone = SK_INIT_DATA; */
-		break;
-
-    case SK_INIT_IO:
-#ifndef SK_NO_RLMT
-		for (i = 0; i < SK_MAX_NETS; i++) {
-			pAC->Addr.Net[i].ActivePort = pAC->Rlmt.Net[i].ActivePort;
-		}
-#endif /* !SK_NO_RLMT */
-#ifdef xDEBUG
-		for (i = 0; i < SK_MAX_MACS; i++) {
-			if (pAC->Addr.Port[i].NextExactMatchRlmt <
-				SK_ADDR_FIRST_MATCH_RLMT) {
-				Next0[i] |= 8;
-			}
-		}
-#endif	/* DEBUG */
-		
-		/* Read permanent logical MAC address from Control Register File. */
-		for (j = 0; j < SK_MAC_ADDR_LEN; j++) {
-			InAddr = (SK_U8 *) &pAC->Addr.Net[0].PermanentMacAddress.a[j];
-			SK_IN8(IoC, B2_MAC_1 + j, InAddr);
-		}
-
-		if (!pAC->Addr.Net[0].CurrentMacAddressSet) {
-			/* Set the current logical MAC address to the permanent one. */
-			pAC->Addr.Net[0].CurrentMacAddress =
-				pAC->Addr.Net[0].PermanentMacAddress;
-			pAC->Addr.Net[0].CurrentMacAddressSet = SK_TRUE;
-		}
-
-		/* Set the current logical MAC address. */
-		pAC->Addr.Port[pAC->Addr.Net[0].ActivePort].Exact[0] =
-			pAC->Addr.Net[0].CurrentMacAddress;
-#if SK_MAX_NETS > 1
-		/* Set logical MAC address for net 2 to (log | 3). */
-		if (!pAC->Addr.Net[1].CurrentMacAddressSet) {
-			pAC->Addr.Net[1].PermanentMacAddress =
-				pAC->Addr.Net[0].PermanentMacAddress;
-			pAC->Addr.Net[1].PermanentMacAddress.a[5] |= 3;
-			/* Set the current logical MAC address to the permanent one. */
-			pAC->Addr.Net[1].CurrentMacAddress =
-				pAC->Addr.Net[1].PermanentMacAddress;
-			pAC->Addr.Net[1].CurrentMacAddressSet = SK_TRUE;
-		}
-#endif	/* SK_MAX_NETS > 1 */
-
-#ifdef DEBUG
-		for (i = 0; i < (SK_U32) pAC->GIni.GIMacsFound; i++) {
-			SK_DBG_MSG(pAC, SK_DBGMOD_ADDR, SK_DBGCAT_INIT,
-				("Permanent MAC Address (Net%d): %02X %02X %02X %02X %02X %02X\n",
-					i,
-					pAC->Addr.Net[i].PermanentMacAddress.a[0],
-					pAC->Addr.Net[i].PermanentMacAddress.a[1],
-					pAC->Addr.Net[i].PermanentMacAddress.a[2],
-					pAC->Addr.Net[i].PermanentMacAddress.a[3],
-					pAC->Addr.Net[i].PermanentMacAddress.a[4],
-					pAC->Addr.Net[i].PermanentMacAddress.a[5]))
-			
-			SK_DBG_MSG(pAC, SK_DBGMOD_ADDR, SK_DBGCAT_INIT,
-				("Logical MAC Address (Net%d): %02X %02X %02X %02X %02X %02X\n",
-					i,
-					pAC->Addr.Net[i].CurrentMacAddress.a[0],
-					pAC->Addr.Net[i].CurrentMacAddress.a[1],
-					pAC->Addr.Net[i].CurrentMacAddress.a[2],
-					pAC->Addr.Net[i].CurrentMacAddress.a[3],
-					pAC->Addr.Net[i].CurrentMacAddress.a[4],
-					pAC->Addr.Net[i].CurrentMacAddress.a[5]))
-		}
-#endif	/* DEBUG */
-
-		for (i = 0; i < (SK_U32) pAC->GIni.GIMacsFound; i++) {
-			pAPort = &pAC->Addr.Port[i];
-
-			/* Read permanent port addresses from Control Register File. */
-			for (j = 0; j < SK_MAC_ADDR_LEN; j++) {
-				InAddr = (SK_U8 *) &pAPort->PermanentMacAddress.a[j];
-				SK_IN8(IoC, B2_MAC_2 + 8 * i + j, InAddr);
-			}
-
-			if (!pAPort->CurrentMacAddressSet) {
-				/*
-				 * Set the current and previous physical MAC address
-				 * of this port to its permanent MAC address.
-				 */
-				pAPort->CurrentMacAddress = pAPort->PermanentMacAddress;
-				pAPort->PreviousMacAddress = pAPort->PermanentMacAddress;
-				pAPort->CurrentMacAddressSet = SK_TRUE;
-			}
-
-			/* Set port's current physical MAC address. */
-			OutAddr = (SK_U16 *) &pAPort->CurrentMacAddress.a[0];
-#ifdef GENESIS
-			if (pAC->GIni.GIGenesis) {
-				XM_OUTADDR(IoC, i, XM_SA, OutAddr);
-			}
-#endif /* GENESIS */
-#ifdef YUKON
-			if (!pAC->GIni.GIGenesis) {
-				GM_OUTADDR(IoC, i, GM_SRC_ADDR_1L, OutAddr);
-			}
-#endif /* YUKON */
-#ifdef DEBUG
-			SK_DBG_MSG(pAC, SK_DBGMOD_ADDR, SK_DBGCAT_INIT,
-				("SkAddrInit: Permanent Physical MAC Address: %02X %02X %02X %02X %02X %02X\n",
-					pAPort->PermanentMacAddress.a[0],
-					pAPort->PermanentMacAddress.a[1],
-					pAPort->PermanentMacAddress.a[2],
-					pAPort->PermanentMacAddress.a[3],
-					pAPort->PermanentMacAddress.a[4],
-					pAPort->PermanentMacAddress.a[5]))
-			
-			SK_DBG_MSG(pAC, SK_DBGMOD_ADDR, SK_DBGCAT_INIT,
-				("SkAddrInit: Physical MAC Address: %02X %02X %02X %02X %02X %02X\n",
-					pAPort->CurrentMacAddress.a[0],
-					pAPort->CurrentMacAddress.a[1],
-					pAPort->CurrentMacAddress.a[2],
-					pAPort->CurrentMacAddress.a[3],
-					pAPort->CurrentMacAddress.a[4],
-					pAPort->CurrentMacAddress.a[5]))
-#endif /* DEBUG */
-		}
-		/* pAC->Addr.InitDone = SK_INIT_IO; */
-		break;
-
-	case SK_INIT_RUN:
-#ifdef xDEBUG
-		for (i = 0; i < SK_MAX_MACS; i++) {
-			if (pAC->Addr.Port[i].NextExactMatchRlmt <
-				SK_ADDR_FIRST_MATCH_RLMT) {
-				Next0[i] |= 16;
-			}
-		}
-#endif	/* DEBUG */
-
-		/* pAC->Addr.InitDone = SK_INIT_RUN; */
-		break;
-
-	default:	/* error */
-		break;
-	}
-
-	return (SK_ADDR_SUCCESS);
-	
-}	/* SkAddrInit */
-
-#ifndef SK_SLIM
-
-/******************************************************************************
- *
- *	SkAddrMcClear - clear the multicast table
- *
- * Description:
- *	This routine clears the multicast table.
- *
- *	If not suppressed by Flag SK_MC_SW_ONLY, the hardware is updated
- *	immediately.
- *
- *	It calls either SkAddrXmacMcClear or SkAddrGmacMcClear, according
- *	to the adapter in use. The real work is done there.
- *
- * Context:
- *	runtime, pageable
- *	may be called starting with SK_INIT_DATA with flag SK_MC_SW_ONLY
- *	may be called after SK_INIT_IO without limitation
- *
- * Returns:
- *	SK_ADDR_SUCCESS
- *	SK_ADDR_ILLEGAL_PORT
- */
-int	SkAddrMcClear(
-SK_AC	*pAC,		/* adapter context */
-SK_IOC	IoC,		/* I/O context */
-SK_U32	PortNumber,	/* Index of affected port */
-int		Flags)		/* permanent/non-perm, sw-only */
-{
-	int ReturnCode;
-	
-	if (PortNumber >= (SK_U32) pAC->GIni.GIMacsFound) {
-		return (SK_ADDR_ILLEGAL_PORT);
-	}
-	
-	if (pAC->GIni.GIGenesis) {
-		ReturnCode = SkAddrXmacMcClear(pAC, IoC, PortNumber, Flags);
-	}
-	else {
-		ReturnCode = SkAddrGmacMcClear(pAC, IoC, PortNumber, Flags);
-	}
-
-	return (ReturnCode);
-
-}	/* SkAddrMcClear */
-
-#endif /* !SK_SLIM */
-
-#ifndef SK_SLIM
-
-/******************************************************************************
- *
- *	SkAddrXmacMcClear - clear the multicast table
- *
- * Description:
- *	This routine clears the multicast table
- *	(either entry 2 or entries 3-16 and InexactFilter) of the given port.
- *	If not suppressed by Flag SK_MC_SW_ONLY, the hardware is updated
- *	immediately.
- *
- * Context:
- *	runtime, pageable
- *	may be called starting with SK_INIT_DATA with flag SK_MC_SW_ONLY
- *	may be called after SK_INIT_IO without limitation
- *
- * Returns:
- *	SK_ADDR_SUCCESS
- *	SK_ADDR_ILLEGAL_PORT
- */
-static int	SkAddrXmacMcClear(
-SK_AC	*pAC,		/* adapter context */
-SK_IOC	IoC,		/* I/O context */
-SK_U32	PortNumber,	/* Index of affected port */
-int		Flags)		/* permanent/non-perm, sw-only */
-{
-	int i;
-
-	if (Flags & SK_ADDR_PERMANENT) {	/* permanent => RLMT */
-
-		/* Clear RLMT multicast addresses. */
-		pAC->Addr.Port[PortNumber].NextExactMatchRlmt = SK_ADDR_FIRST_MATCH_RLMT;
-	}
-	else {	/* not permanent => DRV */
-
-		/* Clear InexactFilter */
-		for (i = 0; i < 8; i++) {
-			pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i] = 0;
-		}
-
-		/* Clear DRV multicast addresses. */
-
-		pAC->Addr.Port[PortNumber].NextExactMatchDrv = SK_ADDR_FIRST_MATCH_DRV;
-	}
-
-	if (!(Flags & SK_MC_SW_ONLY)) {
-		(void) SkAddrXmacMcUpdate(pAC, IoC, PortNumber);
-	}
-
-	return (SK_ADDR_SUCCESS);
-	
-}	/* SkAddrXmacMcClear */
-
-#endif /* !SK_SLIM */
-
-#ifndef SK_SLIM
-
-/******************************************************************************
- *
- *	SkAddrGmacMcClear - clear the multicast table
- *
- * Description:
- *	This routine clears the multicast hashing table (InexactFilter)
- *	(either the RLMT or the driver bits) of the given port.
- *
- *	If not suppressed by Flag SK_MC_SW_ONLY, the hardware is updated
- *	immediately.
- *
- * Context:
- *	runtime, pageable
- *	may be called starting with SK_INIT_DATA with flag SK_MC_SW_ONLY
- *	may be called after SK_INIT_IO without limitation
- *
- * Returns:
- *	SK_ADDR_SUCCESS
- *	SK_ADDR_ILLEGAL_PORT
- */
-static int	SkAddrGmacMcClear(
-SK_AC	*pAC,		/* adapter context */
-SK_IOC	IoC,		/* I/O context */
-SK_U32	PortNumber,	/* Index of affected port */
-int		Flags)		/* permanent/non-perm, sw-only */
-{
-	int i;
-
-#ifdef DEBUG
-	SK_DBG_MSG(pAC, SK_DBGMOD_ADDR, SK_DBGCAT_CTRL,
-		("GMAC InexactFilter (not cleared): %02X %02X %02X %02X %02X %02X %02X %02X\n",
-			pAC->Addr.Port[PortNumber].InexactFilter.Bytes[0],
-			pAC->Addr.Port[PortNumber].InexactFilter.Bytes[1],
-			pAC->Addr.Port[PortNumber].InexactFilter.Bytes[2],
-			pAC->Addr.Port[PortNumber].InexactFilter.Bytes[3],
-			pAC->Addr.Port[PortNumber].InexactFilter.Bytes[4],
-			pAC->Addr.Port[PortNumber].InexactFilter.Bytes[5],
-			pAC->Addr.Port[PortNumber].InexactFilter.Bytes[6],
-			pAC->Addr.Port[PortNumber].InexactFilter.Bytes[7]))
-#endif	/* DEBUG */
-
-	/* Clear InexactFilter */
-	for (i = 0; i < 8; i++) {
-		pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i] = 0;
-	}
-	
-	if (Flags & SK_ADDR_PERMANENT) {	/* permanent => RLMT */
-		
-		/* Copy DRV bits to InexactFilter. */
-		for (i = 0; i < 8; i++) {
-			pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i] |=
-				pAC->Addr.Port[PortNumber].InexactDrvFilter.Bytes[i];
-			
-			/* Clear InexactRlmtFilter. */
-			pAC->Addr.Port[PortNumber].InexactRlmtFilter.Bytes[i] = 0;
-
-		}		
-	}
-	else {	/* not permanent => DRV */
-		
-		/* Copy RLMT bits to InexactFilter. */
-		for (i = 0; i < 8; i++) {
-			pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i] |=
-				pAC->Addr.Port[PortNumber].InexactRlmtFilter.Bytes[i];
-			
-			/* Clear InexactDrvFilter. */
-			pAC->Addr.Port[PortNumber].InexactDrvFilter.Bytes[i] = 0;
-		}
-	}
-	
-#ifdef DEBUG
-	SK_DBG_MSG(pAC, SK_DBGMOD_ADDR, SK_DBGCAT_CTRL,
-		("GMAC InexactFilter (cleared): %02X %02X %02X %02X %02X %02X %02X %02X\n",
-			pAC->Addr.Port[PortNumber].InexactFilter.Bytes[0],
-			pAC->Addr.Port[PortNumber].InexactFilter.Bytes[1],
-			pAC->Addr.Port[PortNumber].InexactFilter.Bytes[2],
-			pAC->Addr.Port[PortNumber].InexactFilter.Bytes[3],
-			pAC->Addr.Port[PortNumber].InexactFilter.Bytes[4],
-			pAC->Addr.Port[PortNumber].InexactFilter.Bytes[5],
-			pAC->Addr.Port[PortNumber].InexactFilter.Bytes[6],
-			pAC->Addr.Port[PortNumber].InexactFilter.Bytes[7]))
-#endif	/* DEBUG */
-	
-	if (!(Flags & SK_MC_SW_ONLY)) {
-		(void) SkAddrGmacMcUpdate(pAC, IoC, PortNumber);
-	}
-	
-	return (SK_ADDR_SUCCESS);
-
-}	/* SkAddrGmacMcClear */
-
-#ifndef SK_ADDR_CHEAT
-
-/******************************************************************************
- *
- *	SkXmacMcHash - hash multicast address
- *
- * Description:
- *	This routine computes the hash value for a multicast address.
- *	A CRC32 algorithm is used.
- *
- * Notes:
- *	The code was adapted from the XaQti data sheet.
- *
- * Context:
- *	runtime, pageable
- *
- * Returns:
- *	Hash value of multicast address.
- */
-static SK_U32 SkXmacMcHash(
-unsigned char *pMc)	/* Multicast address */
-{
-	SK_U32 Idx;
-	SK_U32 Bit;
-	SK_U32 Data;
-	SK_U32 Crc;
-
-	Crc = 0xFFFFFFFFUL;
-	for (Idx = 0; Idx < SK_MAC_ADDR_LEN; Idx++) {
-		Data = *pMc++;
-		for (Bit = 0; Bit < 8; Bit++, Data >>= 1) {
-			Crc = (Crc >> 1) ^ (((Crc ^ Data) & 1) ? XMAC_POLY : 0);
-		}
-	}
-
-	return (Crc & ((1 << HASH_BITS) - 1));
-
-}	/* SkXmacMcHash */
-
-
-/******************************************************************************
- *
- *	SkGmacMcHash - hash multicast address
- *
- * Description:
- *	This routine computes the hash value for a multicast address.
- *	A CRC16 algorithm is used.
- *
- * Notes:
- *
- *
- * Context:
- *	runtime, pageable
- *
- * Returns:
- *	Hash value of multicast address.
- */
-static SK_U32 SkGmacMcHash(
-unsigned char *pMc)	/* Multicast address */
-{
-	SK_U32 Data;
-	SK_U32 TmpData;
-	SK_U32 Crc;
-	int Byte;
-	int Bit;
-
-	Crc = 0xFFFFFFFFUL;
-	for (Byte = 0; Byte < 6; Byte++) {
-		/* Get next byte. */
-		Data = (SK_U32) pMc[Byte];
-		
-		/* Change bit order in byte. */
-		TmpData = Data;
-		for (Bit = 0; Bit < 8; Bit++) {
-			if (TmpData & 1L) {
-				Data |=  1L << (7 - Bit);
-			}
-			else {
-				Data &= ~(1L << (7 - Bit));
-			}
-			TmpData >>= 1;
-		}
-		
-		Crc ^= (Data << 24);
-		for (Bit = 0; Bit < 8; Bit++) {
-			if (Crc & 0x80000000) {
-				Crc = (Crc << 1) ^ GMAC_POLY;
-			}
-			else {
-				Crc <<= 1;
-			}
-		}
-	}
-	
-	return (Crc & ((1 << HASH_BITS) - 1));
-
-}	/* SkGmacMcHash */
-
-#endif	/* !SK_ADDR_CHEAT */
-
-/******************************************************************************
- *
- *	SkAddrMcAdd - add a multicast address to a port
- *
- * Description:
- *	This routine enables reception for a given address on the given port.
- *
- *	It calls either SkAddrXmacMcAdd or SkAddrGmacMcAdd, according to the
- *	adapter in use. The real work is done there.
- *
- * Notes:
- *	The return code is only valid for SK_PROM_MODE_NONE.
- *
- * Context:
- *	runtime, pageable
- *	may be called after SK_INIT_DATA
- *
- * Returns:
- *	SK_MC_FILTERING_EXACT
- *	SK_MC_FILTERING_INEXACT
- *	SK_MC_ILLEGAL_ADDRESS
- *	SK_MC_ILLEGAL_PORT
- *	SK_MC_RLMT_OVERFLOW
- */
-int	SkAddrMcAdd(
-SK_AC		*pAC,		/* adapter context */
-SK_IOC		IoC,		/* I/O context */
-SK_U32		PortNumber,	/* Port Number */
-SK_MAC_ADDR	*pMc,		/* multicast address to be added */
-int			Flags)		/* permanent/non-permanent */
-{
-	int ReturnCode;
-	
-	if (PortNumber >= (SK_U32) pAC->GIni.GIMacsFound) {
-		return (SK_ADDR_ILLEGAL_PORT);
-	}
-	
-	if (pAC->GIni.GIGenesis) {
-		ReturnCode = SkAddrXmacMcAdd(pAC, IoC, PortNumber, pMc, Flags);
-	}
-	else {
-		ReturnCode = SkAddrGmacMcAdd(pAC, IoC, PortNumber, pMc, Flags);
-	}
-
-	return (ReturnCode);
-
-}	/* SkAddrMcAdd */
-
-
-/******************************************************************************
- *
- *	SkAddrXmacMcAdd - add a multicast address to a port
- *
- * Description:
- *	This routine enables reception for a given address on the given port.
- *
- * Notes:
- *	The return code is only valid for SK_PROM_MODE_NONE.
- *
- *	The multicast bit is only checked if there are no free exact match
- *	entries.
- *
- * Context:
- *	runtime, pageable
- *	may be called after SK_INIT_DATA
- *
- * Returns:
- *	SK_MC_FILTERING_EXACT
- *	SK_MC_FILTERING_INEXACT
- *	SK_MC_ILLEGAL_ADDRESS
- *	SK_MC_RLMT_OVERFLOW
- */
-static int	SkAddrXmacMcAdd(
-SK_AC		*pAC,		/* adapter context */
-SK_IOC		IoC,		/* I/O context */
-SK_U32		PortNumber,	/* Port Number */
-SK_MAC_ADDR	*pMc,		/* multicast address to be added */
-int		Flags)		/* permanent/non-permanent */
-{
-	int	i;
-	SK_U8	Inexact;
-#ifndef SK_ADDR_CHEAT
-	SK_U32 HashBit;
-#endif	/* !defined(SK_ADDR_CHEAT) */
-
-	if (Flags & SK_ADDR_PERMANENT) {	/* permanent => RLMT */
-#ifdef xDEBUG
-		if (pAC->Addr.Port[PortNumber].NextExactMatchRlmt <
-			SK_ADDR_FIRST_MATCH_RLMT) {
-			Next0[PortNumber] |= 1;
-			return (SK_MC_RLMT_OVERFLOW);
-		}
-#endif	/* DEBUG */
-		
-		if (pAC->Addr.Port[PortNumber].NextExactMatchRlmt >
-			SK_ADDR_LAST_MATCH_RLMT) {
-			return (SK_MC_RLMT_OVERFLOW);
-		}
-
-		/* Set a RLMT multicast address. */
-
-		pAC->Addr.Port[PortNumber].Exact[
-			pAC->Addr.Port[PortNumber].NextExactMatchRlmt++] = *pMc;
-
-		return (SK_MC_FILTERING_EXACT);
-	}
-
-#ifdef xDEBUG
-	if (pAC->Addr.Port[PortNumber].NextExactMatchDrv <
-		SK_ADDR_FIRST_MATCH_DRV) {
-			Next0[PortNumber] |= 2;
-		return (SK_MC_RLMT_OVERFLOW);
-	}
-#endif	/* DEBUG */
-	
-	if (pAC->Addr.Port[PortNumber].NextExactMatchDrv <= SK_ADDR_LAST_MATCH_DRV) {
-
-		/* Set exact match entry. */
-		pAC->Addr.Port[PortNumber].Exact[
-			pAC->Addr.Port[PortNumber].NextExactMatchDrv++] = *pMc;
-
-		/* Clear InexactFilter */
-		for (i = 0; i < 8; i++) {
-			pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i] = 0;
-		}
-	}
-	else {
-		if (!(pMc->a[0] & SK_MC_BIT)) {
-			/* Hashing only possible with multicast addresses */
-			return (SK_MC_ILLEGAL_ADDRESS);
-		}
-#ifndef SK_ADDR_CHEAT
-		/* Compute hash value of address. */
-		HashBit = 63 - SkXmacMcHash(&pMc->a[0]);
-
-		/* Add bit to InexactFilter. */
-		pAC->Addr.Port[PortNumber].InexactFilter.Bytes[HashBit / 8] |=
-			1 << (HashBit % 8);
-#else	/* SK_ADDR_CHEAT */
-		/* Set all bits in InexactFilter. */
-		for (i = 0; i < 8; i++) {
-			pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i] = 0xFF;
-		}
-#endif	/* SK_ADDR_CHEAT */
-	}
-
-	for (Inexact = 0, i = 0; i < 8; i++) {
-		Inexact |= pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i];
-	}
-
-	if (Inexact == 0 && pAC->Addr.Port[PortNumber].PromMode == 0) {
-		return (SK_MC_FILTERING_EXACT);
-	}
-	else {
-		return (SK_MC_FILTERING_INEXACT);
-	}
-
-}	/* SkAddrXmacMcAdd */
-
-
-/******************************************************************************
- *
- *	SkAddrGmacMcAdd - add a multicast address to a port
- *
- * Description:
- *	This routine enables reception for a given address on the given port.
- *
- * Notes:
- *	The return code is only valid for SK_PROM_MODE_NONE.
- *
- * Context:
- *	runtime, pageable
- *	may be called after SK_INIT_DATA
- *
- * Returns:
- *	SK_MC_FILTERING_INEXACT
- *	SK_MC_ILLEGAL_ADDRESS
- */
-static int	SkAddrGmacMcAdd(
-SK_AC		*pAC,		/* adapter context */
-SK_IOC		IoC,		/* I/O context */
-SK_U32		PortNumber,	/* Port Number */
-SK_MAC_ADDR	*pMc,		/* multicast address to be added */
-int		Flags)		/* permanent/non-permanent */
-{
-	int	i;
-#ifndef SK_ADDR_CHEAT
-	SK_U32 HashBit;
-#endif	/* !defined(SK_ADDR_CHEAT) */
-		
-	if (!(pMc->a[0] & SK_MC_BIT)) {
-		/* Hashing only possible with multicast addresses */
-		return (SK_MC_ILLEGAL_ADDRESS);
-	}
-	
-#ifndef SK_ADDR_CHEAT
-	
-	/* Compute hash value of address. */
-	HashBit = SkGmacMcHash(&pMc->a[0]);
-	
-	if (Flags & SK_ADDR_PERMANENT) {	/* permanent => RLMT */
-		
-		/* Add bit to InexactRlmtFilter. */
-		pAC->Addr.Port[PortNumber].InexactRlmtFilter.Bytes[HashBit / 8] |=
-			1 << (HashBit % 8);
-		
-		/* Copy bit to InexactFilter. */
-		for (i = 0; i < 8; i++) {
-			pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i] |=
-				pAC->Addr.Port[PortNumber].InexactRlmtFilter.Bytes[i];
-		}
-#ifdef DEBUG
-		SK_DBG_MSG(pAC, SK_DBGMOD_ADDR, SK_DBGCAT_CTRL,
-		("GMAC InexactRlmtFilter: %02X %02X %02X %02X %02X %02X %02X %02X\n",
-			pAC->Addr.Port[PortNumber].InexactRlmtFilter.Bytes[0],
-			pAC->Addr.Port[PortNumber].InexactRlmtFilter.Bytes[1],
-			pAC->Addr.Port[PortNumber].InexactRlmtFilter.Bytes[2],
-			pAC->Addr.Port[PortNumber].InexactRlmtFilter.Bytes[3],
-			pAC->Addr.Port[PortNumber].InexactRlmtFilter.Bytes[4],
-			pAC->Addr.Port[PortNumber].InexactRlmtFilter.Bytes[5],
-			pAC->Addr.Port[PortNumber].InexactRlmtFilter.Bytes[6],
-			pAC->Addr.Port[PortNumber].InexactRlmtFilter.Bytes[7]))
-#endif	/* DEBUG */
-	}
-	else {	/* not permanent => DRV */
-		
-		/* Add bit to InexactDrvFilter. */
-		pAC->Addr.Port[PortNumber].InexactDrvFilter.Bytes[HashBit / 8] |=
-			1 << (HashBit % 8);
-		
-		/* Copy bit to InexactFilter. */
-		for (i = 0; i < 8; i++) {
-			pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i] |=
-				pAC->Addr.Port[PortNumber].InexactDrvFilter.Bytes[i];
-		}
-#ifdef DEBUG
-		SK_DBG_MSG(pAC, SK_DBGMOD_ADDR, SK_DBGCAT_CTRL,
-		("GMAC InexactDrvFilter: %02X %02X %02X %02X %02X %02X %02X %02X\n",
-			pAC->Addr.Port[PortNumber].InexactDrvFilter.Bytes[0],
-			pAC->Addr.Port[PortNumber].InexactDrvFilter.Bytes[1],
-			pAC->Addr.Port[PortNumber].InexactDrvFilter.Bytes[2],
-			pAC->Addr.Port[PortNumber].InexactDrvFilter.Bytes[3],
-			pAC->Addr.Port[PortNumber].InexactDrvFilter.Bytes[4],
-			pAC->Addr.Port[PortNumber].InexactDrvFilter.Bytes[5],
-			pAC->Addr.Port[PortNumber].InexactDrvFilter.Bytes[6],
-			pAC->Addr.Port[PortNumber].InexactDrvFilter.Bytes[7]))
-#endif	/* DEBUG */
-	}
-	
-#else	/* SK_ADDR_CHEAT */
-	
-	/* Set all bits in InexactFilter. */
-	for (i = 0; i < 8; i++) {
-		pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i] = 0xFF;
-	}
-#endif	/* SK_ADDR_CHEAT */
-		
-	return (SK_MC_FILTERING_INEXACT);
-	
-}	/* SkAddrGmacMcAdd */
-
-#endif /* !SK_SLIM */
-
-/******************************************************************************
- *
- *	SkAddrMcUpdate - update the HW MC address table and set the MAC address
- *
- * Description:
- *	This routine enables reception of the addresses contained in a local
- *	table for a given port.
- *	It also programs the port's current physical MAC address.
- *
- *	It calls either SkAddrXmacMcUpdate or SkAddrGmacMcUpdate, according
- *	to the adapter in use. The real work is done there.
- *
- * Notes:
- *	The return code is only valid for SK_PROM_MODE_NONE.
- *
- * Context:
- *	runtime, pageable
- *	may be called after SK_INIT_IO
- *
- * Returns:
- *	SK_MC_FILTERING_EXACT
- *	SK_MC_FILTERING_INEXACT
- *	SK_ADDR_ILLEGAL_PORT
- */
-int	SkAddrMcUpdate(
-SK_AC	*pAC,		/* adapter context */
-SK_IOC	IoC,		/* I/O context */
-SK_U32	PortNumber)	/* Port Number */
-{
-	int ReturnCode = 0;
-#if (!defined(SK_SLIM) || defined(DEBUG))
-	if (PortNumber >= (SK_U32) pAC->GIni.GIMacsFound) {
-		return (SK_ADDR_ILLEGAL_PORT);
-	}
-#endif /* !SK_SLIM || DEBUG */
-
-#ifdef GENESIS
-	if (pAC->GIni.GIGenesis) {
-		ReturnCode = SkAddrXmacMcUpdate(pAC, IoC, PortNumber);
-	}
-#endif /* GENESIS */
-#ifdef YUKON
-	if (!pAC->GIni.GIGenesis) {
-		ReturnCode = SkAddrGmacMcUpdate(pAC, IoC, PortNumber);
-	}
-#endif /* YUKON */
-	return (ReturnCode);
-
-}	/* SkAddrMcUpdate */
-
-
-#ifdef GENESIS
-
-/******************************************************************************
- *
- *	SkAddrXmacMcUpdate - update the HW MC address table and set the MAC address
- *
- * Description:
- *	This routine enables reception of the addresses contained in a local
- *	table for a given port.
- *	It also programs the port's current physical MAC address.
- *
- * Notes:
- *	The return code is only valid for SK_PROM_MODE_NONE.
- *
- * Context:
- *	runtime, pageable
- *	may be called after SK_INIT_IO
- *
- * Returns:
- *	SK_MC_FILTERING_EXACT
- *	SK_MC_FILTERING_INEXACT
- *	SK_ADDR_ILLEGAL_PORT
- */
-static int	SkAddrXmacMcUpdate(
-SK_AC	*pAC,		/* adapter context */
-SK_IOC	IoC,		/* I/O context */
-SK_U32	PortNumber)	/* Port Number */
-{
-	SK_U32		i;
-	SK_U8		Inexact;
-	SK_U16		*OutAddr;
-	SK_ADDR_PORT	*pAPort;
-
-	SK_DBG_MSG(pAC,SK_DBGMOD_ADDR, SK_DBGCAT_CTRL,
-		("SkAddrXmacMcUpdate on Port %u.\n", PortNumber))
-	
-	pAPort = &pAC->Addr.Port[PortNumber];
-
-#ifdef DEBUG
-	SK_DBG_MSG(pAC,SK_DBGMOD_ADDR, SK_DBGCAT_CTRL,
-		("Next0 on Port %d: %d\n", PortNumber, Next0[PortNumber]))
-#endif /* DEBUG */
-
-	/* Start with 0 to also program the logical MAC address. */
-	for (i = 0; i < pAPort->NextExactMatchRlmt; i++) {
-		/* Set exact match address i on XMAC */
-		OutAddr = (SK_U16 *) &pAPort->Exact[i].a[0];
-		XM_OUTADDR(IoC, PortNumber, XM_EXM(i), OutAddr);
-	}
-
-	/* Clear other permanent exact match addresses on XMAC */
-	if (pAPort->NextExactMatchRlmt <= SK_ADDR_LAST_MATCH_RLMT) {
-		
-		SkXmClrExactAddr(pAC, IoC, PortNumber, pAPort->NextExactMatchRlmt,
-			SK_ADDR_LAST_MATCH_RLMT);
-	}
-
-	for (i = pAPort->FirstExactMatchDrv; i < pAPort->NextExactMatchDrv; i++) {
-		OutAddr = (SK_U16 *) &pAPort->Exact[i].a[0];
-		XM_OUTADDR(IoC, PortNumber, XM_EXM(i), OutAddr);
-	}
-
-	/* Clear other non-permanent exact match addresses on XMAC */
-	if (pAPort->NextExactMatchDrv <= SK_ADDR_LAST_MATCH_DRV) {
-		
-		SkXmClrExactAddr(pAC, IoC, PortNumber, pAPort->NextExactMatchDrv,
-			SK_ADDR_LAST_MATCH_DRV);
-	}
-
-	for (Inexact = 0, i = 0; i < 8; i++) {
-		Inexact |= pAPort->InexactFilter.Bytes[i];
-	}
-
-	if (pAPort->PromMode & SK_PROM_MODE_ALL_MC) {
-		
-		/* Set all bits in 64-bit hash register. */
-		XM_OUTHASH(IoC, PortNumber, XM_HSM, &OnesHash);
-		
-		/* Enable Hashing */
-		SkMacHashing(pAC, IoC, (int) PortNumber, SK_TRUE);
-	}
-	else if (Inexact != 0) {
-		
-		/* Set 64-bit hash register to InexactFilter. */
-		XM_OUTHASH(IoC, PortNumber, XM_HSM, &pAPort->InexactFilter.Bytes[0]);
-		
-		/* Enable Hashing */
-		SkMacHashing(pAC, IoC, (int) PortNumber, SK_TRUE);
-	}
-	else {
-		/* Disable Hashing */
-		SkMacHashing(pAC, IoC, (int) PortNumber, SK_FALSE);
-	}
-
-	if (pAPort->PromMode != SK_PROM_MODE_NONE) {
-		(void) SkAddrXmacPromiscuousChange(pAC, IoC, PortNumber, pAPort->PromMode);
-	}
-
-	/* Set port's current physical MAC address. */
-	OutAddr = (SK_U16 *) &pAPort->CurrentMacAddress.a[0];
-	
-	XM_OUTADDR(IoC, PortNumber, XM_SA, OutAddr);
-
-#ifdef xDEBUG
-	for (i = 0; i < pAPort->NextExactMatchRlmt; i++) {
-		SK_U8		InAddr8[6];
-		SK_U16		*InAddr;
-
-		/* Get exact match address i from port PortNumber. */
-		InAddr = (SK_U16 *) &InAddr8[0];
-		
-		XM_INADDR(IoC, PortNumber, XM_EXM(i), InAddr);
-		
-		SK_DBG_MSG(pAC,SK_DBGMOD_ADDR, SK_DBGCAT_CTRL,
-			("SkAddrXmacMcUpdate: MC address %d on Port %u: ",
-			 "%02x %02x %02x %02x %02x %02x -- %02x %02x %02x %02x %02x %02x\n",
-				i,
-				PortNumber,
-				InAddr8[0],
-				InAddr8[1],
-				InAddr8[2],
-				InAddr8[3],
-				InAddr8[4],
-				InAddr8[5],
-				pAPort->Exact[i].a[0],
-				pAPort->Exact[i].a[1],
-				pAPort->Exact[i].a[2],
-				pAPort->Exact[i].a[3],
-				pAPort->Exact[i].a[4],
-				pAPort->Exact[i].a[5]))
-	}
-#endif /* DEBUG */
-
-	/* Determine return value. */
-	if (Inexact == 0 && pAPort->PromMode == 0) {
-		return (SK_MC_FILTERING_EXACT);
-	}
-	else {
-		return (SK_MC_FILTERING_INEXACT);
-	}
-	
-}	/* SkAddrXmacMcUpdate */
-
-#endif  /* GENESIS */
-
-#ifdef YUKON
-
-/******************************************************************************
- *
- *	SkAddrGmacMcUpdate - update the HW MC address table and set the MAC address
- *
- * Description:
- *	This routine enables reception of the addresses contained in a local
- *	table for a given port.
- *	It also programs the port's current physical MAC address.
- *
- * Notes:
- *	The return code is only valid for SK_PROM_MODE_NONE.
- *
- * Context:
- *	runtime, pageable
- *	may be called after SK_INIT_IO
- *
- * Returns:
- *	SK_MC_FILTERING_EXACT
- *	SK_MC_FILTERING_INEXACT
- *	SK_ADDR_ILLEGAL_PORT
- */
-static int	SkAddrGmacMcUpdate(
-SK_AC	*pAC,		/* adapter context */
-SK_IOC	IoC,		/* I/O context */
-SK_U32	PortNumber)	/* Port Number */
-{
-#ifndef SK_SLIM
-	SK_U32		i;
-	SK_U8		Inexact;
-#endif	/* not SK_SLIM */
-	SK_U16		*OutAddr;
-	SK_ADDR_PORT	*pAPort;
-
-	SK_DBG_MSG(pAC,SK_DBGMOD_ADDR, SK_DBGCAT_CTRL,
-		("SkAddrGmacMcUpdate on Port %u.\n", PortNumber))
-	
-	pAPort = &pAC->Addr.Port[PortNumber];
-
-#ifdef DEBUG
-	SK_DBG_MSG(pAC,SK_DBGMOD_ADDR, SK_DBGCAT_CTRL,
-		("Next0 on Port %d: %d\n", PortNumber, Next0[PortNumber]))
-#endif /* DEBUG */
-	
-#ifndef SK_SLIM
-	for (Inexact = 0, i = 0; i < 8; i++) {
-		Inexact |= pAPort->InexactFilter.Bytes[i];
-	}
-	
-	/* Set 64-bit hash register to InexactFilter. */
-	GM_OUTHASH(IoC, PortNumber, GM_MC_ADDR_H1,
-		&pAPort->InexactFilter.Bytes[0]);
-	
-	if (pAPort->PromMode & SK_PROM_MODE_ALL_MC) {				
-		
-		/* Set all bits in 64-bit hash register. */
-		GM_OUTHASH(IoC, PortNumber, GM_MC_ADDR_H1, &OnesHash);
-		
-		/* Enable Hashing */
-		SkMacHashing(pAC, IoC, (int) PortNumber, SK_TRUE);
-	}
-	else {	
-		/* Enable Hashing. */
-		SkMacHashing(pAC, IoC, (int) PortNumber, SK_TRUE);
-	}
-	
-	if (pAPort->PromMode != SK_PROM_MODE_NONE) {
-		(void) SkAddrGmacPromiscuousChange(pAC, IoC, PortNumber, pAPort->PromMode);
-	}
-#else /* SK_SLIM */
-
-	/* Set all bits in 64-bit hash register. */
-	GM_OUTHASH(IoC, PortNumber, GM_MC_ADDR_H1, &OnesHash);
-
-	/* Enable Hashing */
-	SkMacHashing(pAC, IoC, (int) PortNumber, SK_TRUE);
-	
-	(void) SkAddrGmacPromiscuousChange(pAC, IoC, PortNumber, pAPort->PromMode);
-	
-#endif /* SK_SLIM */
-	
-	/* Set port's current physical MAC address. */
-	OutAddr = (SK_U16 *) &pAPort->CurrentMacAddress.a[0];
-	GM_OUTADDR(IoC, PortNumber, GM_SRC_ADDR_1L, OutAddr);
-	
-	/* Set port's current logical MAC address. */
-	OutAddr = (SK_U16 *) &pAPort->Exact[0].a[0];
-	GM_OUTADDR(IoC, PortNumber, GM_SRC_ADDR_2L, OutAddr);
-	
-#ifdef DEBUG
-	SK_DBG_MSG(pAC, SK_DBGMOD_ADDR, SK_DBGCAT_CTRL,
-		("SkAddrGmacMcUpdate: Permanent Physical MAC Address: %02X %02X %02X %02X %02X %02X\n",
-			pAPort->Exact[0].a[0],
-			pAPort->Exact[0].a[1],
-			pAPort->Exact[0].a[2],
-			pAPort->Exact[0].a[3],
-			pAPort->Exact[0].a[4],
-			pAPort->Exact[0].a[5]))
-	
-	SK_DBG_MSG(pAC, SK_DBGMOD_ADDR, SK_DBGCAT_CTRL,
-		("SkAddrGmacMcUpdate: Physical MAC Address: %02X %02X %02X %02X %02X %02X\n",
-			pAPort->CurrentMacAddress.a[0],
-			pAPort->CurrentMacAddress.a[1],
-			pAPort->CurrentMacAddress.a[2],
-			pAPort->CurrentMacAddress.a[3],
-			pAPort->CurrentMacAddress.a[4],
-			pAPort->CurrentMacAddress.a[5]))
-#endif /* DEBUG */
-	
-#ifndef SK_SLIM
-	/* Determine return value. */
-	if (Inexact == 0 && pAPort->PromMode == 0) {
-		return (SK_MC_FILTERING_EXACT);
-	}
-	else {
-		return (SK_MC_FILTERING_INEXACT);
-	}
-#else /* SK_SLIM */
-	return (SK_MC_FILTERING_INEXACT);
-#endif /* SK_SLIM */
-	
-}	/* SkAddrGmacMcUpdate */
-
-#endif /* YUKON */
-
-#ifndef SK_NO_MAO
-
-/******************************************************************************
- *
- *	SkAddrOverride - override a port's MAC address
- *
- * Description:
- *	This routine overrides the MAC address of one port.
- *
- * Context:
- *	runtime, pageable
- *	may be called after SK_INIT_IO
- *
- * Returns:
- *	SK_ADDR_SUCCESS if successful.
- *	SK_ADDR_DUPLICATE_ADDRESS if duplicate MAC address.
- *	SK_ADDR_MULTICAST_ADDRESS if multicast or broadcast address.
- *	SK_ADDR_TOO_EARLY if SK_INIT_IO was not executed before.
- */
-int	SkAddrOverride(
-SK_AC		*pAC,				/* adapter context */
-SK_IOC		IoC,				/* I/O context */
-SK_U32		PortNumber,			/* Port Number */
-SK_MAC_ADDR	SK_FAR *pNewAddr,	/* new MAC address */
-int			Flags)				/* logical/physical MAC address */
-{
-#ifndef SK_NO_RLMT
-	SK_EVPARA	Para;
-#endif /* !SK_NO_RLMT */
-	SK_U32		NetNumber;
-	SK_U32		i;
-	SK_U16		SK_FAR *OutAddr;
-
-#ifndef SK_NO_RLMT
-	NetNumber = pAC->Rlmt.Port[PortNumber].Net->NetNumber;
-#else
-	NetNumber = 0;
-#endif /* SK_NO_RLMT */
-#if (!defined(SK_SLIM) || defined(DEBUG))
-	if (PortNumber >= (SK_U32) pAC->GIni.GIMacsFound) {
-		return (SK_ADDR_ILLEGAL_PORT);
-	}
-#endif /* !SK_SLIM || DEBUG */
-	if (pNewAddr != NULL && (pNewAddr->a[0] & SK_MC_BIT) != 0) {
-		return (SK_ADDR_MULTICAST_ADDRESS);
-	}
-
-	if (!pAC->Addr.Net[NetNumber].CurrentMacAddressSet) {
-		return (SK_ADDR_TOO_EARLY);
-	}
-
-	if (Flags & SK_ADDR_SET_LOGICAL) {	/* Activate logical MAC address. */
-		/* Parameter *pNewAddr is ignored. */
-		for (i = 0; i < (SK_U32) pAC->GIni.GIMacsFound; i++) {
-			if (!pAC->Addr.Port[i].CurrentMacAddressSet) {
-				return (SK_ADDR_TOO_EARLY);
-			}
-		}
-#ifndef SK_NO_RLMT
-		/* Set PortNumber to number of net's active port. */
-		PortNumber = pAC->Rlmt.Net[NetNumber].
-			Port[pAC->Addr.Net[NetNumber].ActivePort]->PortNumber;
-#endif /* !SK_NO_RLMT */
-		pAC->Addr.Port[PortNumber].Exact[0] =
-			pAC->Addr.Net[NetNumber].CurrentMacAddress;
-
-		/* Write address to first exact match entry of active port. */
-		(void) SkAddrMcUpdate(pAC, IoC, PortNumber);
-	}
-	else if (Flags & SK_ADDR_CLEAR_LOGICAL) {
-		/* Deactivate logical MAC address. */
-		/* Parameter *pNewAddr is ignored. */
-		for (i = 0; i < (SK_U32) pAC->GIni.GIMacsFound; i++) {
-			if (!pAC->Addr.Port[i].CurrentMacAddressSet) {
-				return (SK_ADDR_TOO_EARLY);
-			}
-		}
-#ifndef SK_NO_RLMT
-		/* Set PortNumber to number of net's active port. */
-		PortNumber = pAC->Rlmt.Net[NetNumber].
-			Port[pAC->Addr.Net[NetNumber].ActivePort]->PortNumber;
-#endif /* !SK_NO_RLMT */
-		for (i = 0; i < SK_MAC_ADDR_LEN; i++ ) {
-			pAC->Addr.Port[PortNumber].Exact[0].a[i] = 0;
-		}
-
-		/* Write address to first exact match entry of active port. */
-		(void) SkAddrMcUpdate(pAC, IoC, PortNumber);
-	}
-	else if (Flags & SK_ADDR_PHYSICAL_ADDRESS) {	/* Physical MAC address. */
-		if (SK_ADDR_EQUAL(pNewAddr->a,
-			pAC->Addr.Net[NetNumber].CurrentMacAddress.a)) {
-			return (SK_ADDR_DUPLICATE_ADDRESS);
-		}
-
-		for (i = 0; i < (SK_U32) pAC->GIni.GIMacsFound; i++) {
-			if (!pAC->Addr.Port[i].CurrentMacAddressSet) {
-				return (SK_ADDR_TOO_EARLY);
-			}
-
-			if (SK_ADDR_EQUAL(pNewAddr->a,
-				pAC->Addr.Port[i].CurrentMacAddress.a)) {
-				if (i == PortNumber) {
-					return (SK_ADDR_SUCCESS);
-				}
-				else {
-					return (SK_ADDR_DUPLICATE_ADDRESS);
-				}
-			}
-		}
-
-		pAC->Addr.Port[PortNumber].PreviousMacAddress =
-			pAC->Addr.Port[PortNumber].CurrentMacAddress;
-		pAC->Addr.Port[PortNumber].CurrentMacAddress = *pNewAddr;
-
-		/* Change port's physical MAC address. */
-		OutAddr = (SK_U16 SK_FAR *) pNewAddr;
-#ifdef GENESIS
-		if (pAC->GIni.GIGenesis) {
-			XM_OUTADDR(IoC, PortNumber, XM_SA, OutAddr);
-		}
-#endif /* GENESIS */
-#ifdef YUKON
-		if (!pAC->GIni.GIGenesis) {
-			GM_OUTADDR(IoC, PortNumber, GM_SRC_ADDR_1L, OutAddr);
-		}
-#endif /* YUKON */
-
-#ifndef SK_NO_RLMT
-		/* Report address change to RLMT. */
-		Para.Para32[0] = PortNumber;
-		Para.Para32[0] = -1;
-		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_PORT_ADDR, Para);
-#endif /* !SK_NO_RLMT */
-	}
-	else {	/* Logical MAC address. */
-		if (SK_ADDR_EQUAL(pNewAddr->a,
-			pAC->Addr.Net[NetNumber].CurrentMacAddress.a)) {
-			return (SK_ADDR_SUCCESS);
-		}
-		
-		for (i = 0; i < (SK_U32) pAC->GIni.GIMacsFound; i++) {
-			if (!pAC->Addr.Port[i].CurrentMacAddressSet) {
-				return (SK_ADDR_TOO_EARLY);
-			}
-
-			if (SK_ADDR_EQUAL(pNewAddr->a,
-				pAC->Addr.Port[i].CurrentMacAddress.a)) {
-				return (SK_ADDR_DUPLICATE_ADDRESS);
-			}
-		}
-		
-		/*
-		 * In case that the physical and the logical MAC addresses are equal
-		 * we must also change the physical MAC address here.
-		 * In this case we have an adapter which initially was programmed with
-		 * two identical MAC addresses.
-		 */
-		if (SK_ADDR_EQUAL(pAC->Addr.Port[PortNumber].CurrentMacAddress.a,
-				pAC->Addr.Port[PortNumber].Exact[0].a)) {
-			
-			pAC->Addr.Port[PortNumber].PreviousMacAddress =
-				pAC->Addr.Port[PortNumber].CurrentMacAddress;
-			pAC->Addr.Port[PortNumber].CurrentMacAddress = *pNewAddr;
-			
-#ifndef SK_NO_RLMT
-			/* Report address change to RLMT. */
-			Para.Para32[0] = PortNumber;
-			Para.Para32[0] = -1;
-			SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_PORT_ADDR, Para);
-#endif /* !SK_NO_RLMT */
-		}
-		
-#ifndef SK_NO_RLMT
-		/* Set PortNumber to number of net's active port. */
-		PortNumber = pAC->Rlmt.Net[NetNumber].
-			Port[pAC->Addr.Net[NetNumber].ActivePort]->PortNumber;
-#endif /* !SK_NO_RLMT */
-		pAC->Addr.Net[NetNumber].CurrentMacAddress = *pNewAddr;
-		pAC->Addr.Port[PortNumber].Exact[0] = *pNewAddr;
-#ifdef DEBUG
-		SK_DBG_MSG(pAC,SK_DBGMOD_ADDR, SK_DBGCAT_CTRL,
-			("SkAddrOverride: Permanent MAC Address: %02X %02X %02X %02X %02X %02X\n",
-				pAC->Addr.Net[NetNumber].PermanentMacAddress.a[0],
-				pAC->Addr.Net[NetNumber].PermanentMacAddress.a[1],
-				pAC->Addr.Net[NetNumber].PermanentMacAddress.a[2],
-				pAC->Addr.Net[NetNumber].PermanentMacAddress.a[3],
-				pAC->Addr.Net[NetNumber].PermanentMacAddress.a[4],
-				pAC->Addr.Net[NetNumber].PermanentMacAddress.a[5]))
-		
-		SK_DBG_MSG(pAC,SK_DBGMOD_ADDR, SK_DBGCAT_CTRL,
-			("SkAddrOverride: New logical MAC Address: %02X %02X %02X %02X %02X %02X\n",
-				pAC->Addr.Net[NetNumber].CurrentMacAddress.a[0],
-				pAC->Addr.Net[NetNumber].CurrentMacAddress.a[1],
-				pAC->Addr.Net[NetNumber].CurrentMacAddress.a[2],
-				pAC->Addr.Net[NetNumber].CurrentMacAddress.a[3],
-				pAC->Addr.Net[NetNumber].CurrentMacAddress.a[4],
-				pAC->Addr.Net[NetNumber].CurrentMacAddress.a[5]))
-#endif /* DEBUG */
-
-        /* Write address to first exact match entry of active port. */
-		(void) SkAddrMcUpdate(pAC, IoC, PortNumber);
-	}
-
-	return (SK_ADDR_SUCCESS);
-	
-}	/* SkAddrOverride */
-
-
-#endif /* SK_NO_MAO */
-
-/******************************************************************************
- *
- *	SkAddrPromiscuousChange - set promiscuous mode for given port
- *
- * Description:
- *	This routine manages promiscuous mode:
- *	- none
- *	- all LLC frames
- *	- all MC frames
- *
- *	It calls either SkAddrXmacPromiscuousChange or
- *	SkAddrGmacPromiscuousChange, according to the adapter in use.
- *	The real work is done there.
- *
- * Context:
- *	runtime, pageable
- *	may be called after SK_INIT_IO
- *
- * Returns:
- *	SK_ADDR_SUCCESS
- *	SK_ADDR_ILLEGAL_PORT
- */
-int	SkAddrPromiscuousChange(
-SK_AC	*pAC,			/* adapter context */
-SK_IOC	IoC,			/* I/O context */
-SK_U32	PortNumber,		/* port whose promiscuous mode changes */
-int		NewPromMode)	/* new promiscuous mode */
-{
-	int ReturnCode = 0;
-#if (!defined(SK_SLIM) || defined(DEBUG))
-	if (PortNumber >= (SK_U32) pAC->GIni.GIMacsFound) {
-		return (SK_ADDR_ILLEGAL_PORT);
-	}
-#endif /* !SK_SLIM || DEBUG */
-
-#ifdef GENESIS
-	if (pAC->GIni.GIGenesis) {
-		ReturnCode =
-			SkAddrXmacPromiscuousChange(pAC, IoC, PortNumber, NewPromMode);
-	}
-#endif /* GENESIS */
-#ifdef YUKON
-	if (!pAC->GIni.GIGenesis) {
-		ReturnCode =
-			SkAddrGmacPromiscuousChange(pAC, IoC, PortNumber, NewPromMode);
-	}
-#endif /* YUKON */
-
-	return (ReturnCode);
-
-}	/* SkAddrPromiscuousChange */
-
-#ifdef GENESIS
-
-/******************************************************************************
- *
- *	SkAddrXmacPromiscuousChange - set promiscuous mode for given port
- *
- * Description:
- *	This routine manages promiscuous mode:
- *	- none
- *	- all LLC frames
- *	- all MC frames
- *
- * Context:
- *	runtime, pageable
- *	may be called after SK_INIT_IO
- *
- * Returns:
- *	SK_ADDR_SUCCESS
- *	SK_ADDR_ILLEGAL_PORT
- */
-static int	SkAddrXmacPromiscuousChange(
-SK_AC	*pAC,			/* adapter context */
-SK_IOC	IoC,			/* I/O context */
-SK_U32	PortNumber,		/* port whose promiscuous mode changes */
-int		NewPromMode)	/* new promiscuous mode */
-{
-	int			i;
-	SK_BOOL		InexactModeBit;
-	SK_U8		Inexact;
-	SK_U8		HwInexact;
-	SK_FILTER64	HwInexactFilter;
-	SK_U16		LoMode;		/* Lower 16 bits of XMAC Mode Register. */
-	int			CurPromMode = SK_PROM_MODE_NONE;
-
-	/* Read CurPromMode from Hardware. */
-	XM_IN16(IoC, PortNumber, XM_MODE, &LoMode);
-
-	if ((LoMode & XM_MD_ENA_PROM) != 0) {
-		/* Promiscuous mode! */
-		CurPromMode |= SK_PROM_MODE_LLC;
-	}
-	
-	for (Inexact = 0xFF, i = 0; i < 8; i++) {
-		Inexact &= pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i];
-	}
-	if (Inexact == 0xFF) {
-		CurPromMode |= (pAC->Addr.Port[PortNumber].PromMode & SK_PROM_MODE_ALL_MC);
-	}
-	else {
-		/* Get InexactModeBit (bit XM_MD_ENA_HASH in mode register) */
-		XM_IN16(IoC, PortNumber, XM_MODE, &LoMode);
-		
-		InexactModeBit = (LoMode & XM_MD_ENA_HASH) != 0;
-
-		/* Read 64-bit hash register from XMAC */
-		XM_INHASH(IoC, PortNumber, XM_HSM, &HwInexactFilter.Bytes[0]);
-
-		for (HwInexact = 0xFF, i = 0; i < 8; i++) {
-			HwInexact &= HwInexactFilter.Bytes[i];
-		}
-
-		if (InexactModeBit && (HwInexact == 0xFF)) {
-			CurPromMode |= SK_PROM_MODE_ALL_MC;
-		}
-	}
-
-	pAC->Addr.Port[PortNumber].PromMode = NewPromMode;
-
-	if (NewPromMode == CurPromMode) {
-		return (SK_ADDR_SUCCESS);
-	}
-
-	if ((NewPromMode & SK_PROM_MODE_ALL_MC) &&
-		!(CurPromMode & SK_PROM_MODE_ALL_MC)) {	/* All MC. */
-		
-		/* Set all bits in 64-bit hash register. */
-		XM_OUTHASH(IoC, PortNumber, XM_HSM, &OnesHash);
-
-		/* Enable Hashing */
-		SkMacHashing(pAC, IoC, (int) PortNumber, SK_TRUE);
-	}
-	else if ((CurPromMode & SK_PROM_MODE_ALL_MC) &&
-		!(NewPromMode & SK_PROM_MODE_ALL_MC)) {	/* Norm MC. */
-		for (Inexact = 0, i = 0; i < 8; i++) {
-			Inexact |= pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i];
-		}
-		if (Inexact == 0) {
-			/* Disable Hashing */
-			SkMacHashing(pAC, IoC, (int) PortNumber, SK_FALSE);
-		}
-		else {
-			/* Set 64-bit hash register to InexactFilter. */
-			XM_OUTHASH(IoC, PortNumber, XM_HSM,
-				&pAC->Addr.Port[PortNumber].InexactFilter.Bytes[0]);
-
-			/* Enable Hashing */
-			SkMacHashing(pAC, IoC, (int) PortNumber, SK_TRUE);
-		}
-	}
-
-	if ((NewPromMode & SK_PROM_MODE_LLC) &&
-		!(CurPromMode & SK_PROM_MODE_LLC)) {	/* Prom. LLC */
-		/* Set the MAC in Promiscuous Mode */
-		SkMacPromiscMode(pAC, IoC, (int) PortNumber, SK_TRUE);
-	}
-	else if ((CurPromMode & SK_PROM_MODE_LLC) &&
-		!(NewPromMode & SK_PROM_MODE_LLC)) {	/* Norm. LLC. */
-		/* Clear Promiscuous Mode */
-		SkMacPromiscMode(pAC, IoC, (int) PortNumber, SK_FALSE);
-	}
-	
-	return (SK_ADDR_SUCCESS);
-	
-}	/* SkAddrXmacPromiscuousChange */
-
-#endif /* GENESIS */
-
-#ifdef YUKON
-
-/******************************************************************************
- *
- *	SkAddrGmacPromiscuousChange - set promiscuous mode for given port
- *
- * Description:
- *	This routine manages promiscuous mode:
- *	- none
- *	- all LLC frames
- *	- all MC frames
- *
- * Context:
- *	runtime, pageable
- *	may be called after SK_INIT_IO
- *
- * Returns:
- *	SK_ADDR_SUCCESS
- *	SK_ADDR_ILLEGAL_PORT
- */
-static int	SkAddrGmacPromiscuousChange(
-SK_AC	*pAC,			/* adapter context */
-SK_IOC	IoC,			/* I/O context */
-SK_U32	PortNumber,		/* port whose promiscuous mode changes */
-int		NewPromMode)	/* new promiscuous mode */
-{
-	SK_U16		ReceiveControl;	/* GMAC Receive Control Register */
-	int		CurPromMode = SK_PROM_MODE_NONE;
-
-	/* Read CurPromMode from Hardware. */
-	GM_IN16(IoC, PortNumber, GM_RX_CTRL, &ReceiveControl);
-
-	if ((ReceiveControl & (GM_RXCR_UCF_ENA | GM_RXCR_MCF_ENA)) == 0) {
-		/* Promiscuous mode! */
-		CurPromMode |= SK_PROM_MODE_LLC;
-	}
-
-	if ((ReceiveControl & GM_RXCR_MCF_ENA) == 0) {
-		/* All Multicast mode! */
-		CurPromMode |= (pAC->Addr.Port[PortNumber].PromMode & SK_PROM_MODE_ALL_MC);
-	}
-
-	pAC->Addr.Port[PortNumber].PromMode = NewPromMode;
-
-	if (NewPromMode == CurPromMode) {
-		return (SK_ADDR_SUCCESS);
-	}
-	
-	if ((NewPromMode & SK_PROM_MODE_ALL_MC) &&
-		!(CurPromMode & SK_PROM_MODE_ALL_MC)) {	/* All MC */
-		
-		/* Set all bits in 64-bit hash register. */
-		GM_OUTHASH(IoC, PortNumber, GM_MC_ADDR_H1, &OnesHash);
-		
-		/* Enable Hashing */
-		SkMacHashing(pAC, IoC, (int) PortNumber, SK_TRUE);
-	}
-	
-	if ((CurPromMode & SK_PROM_MODE_ALL_MC) &&
-		!(NewPromMode & SK_PROM_MODE_ALL_MC)) {	/* Norm. MC */
-
-		/* Set 64-bit hash register to InexactFilter. */
-		GM_OUTHASH(IoC, PortNumber, GM_MC_ADDR_H1,
-			&pAC->Addr.Port[PortNumber].InexactFilter.Bytes[0]);
-
-		/* Enable Hashing. */
-		SkMacHashing(pAC, IoC, (int) PortNumber, SK_TRUE);
-	}
-
-	if ((NewPromMode & SK_PROM_MODE_LLC) &&
-		!(CurPromMode & SK_PROM_MODE_LLC)) {	/* Prom. LLC */
-		
-		/* Set the MAC to Promiscuous Mode. */
-		SkMacPromiscMode(pAC, IoC, (int) PortNumber, SK_TRUE);
-	}
-	else if ((CurPromMode & SK_PROM_MODE_LLC) &&
-		!(NewPromMode & SK_PROM_MODE_LLC)) {	/* Norm. LLC */
-		
-		/* Clear Promiscuous Mode. */
-		SkMacPromiscMode(pAC, IoC, (int) PortNumber, SK_FALSE);
-	}
-
-	return (SK_ADDR_SUCCESS);
-	
-}	/* SkAddrGmacPromiscuousChange */
-
-#endif /* YUKON */
-
-#ifndef SK_SLIM
-
-/******************************************************************************
- *
- *	SkAddrSwap - swap address info
- *
- * Description:
- *	This routine swaps address info of two ports.
- *
- * Context:
- *	runtime, pageable
- *	may be called after SK_INIT_IO
- *
- * Returns:
- *	SK_ADDR_SUCCESS
- *	SK_ADDR_ILLEGAL_PORT
- */
-int	SkAddrSwap(
-SK_AC	*pAC,			/* adapter context */
-SK_IOC	IoC,			/* I/O context */
-SK_U32	FromPortNumber,		/* Port1 Index */
-SK_U32	ToPortNumber)		/* Port2 Index */
-{
-	int			i;
-	SK_U8		Byte;
-	SK_MAC_ADDR	MacAddr;
-	SK_U32		DWord;
-
-	if (FromPortNumber >= (SK_U32) pAC->GIni.GIMacsFound) {
-		return (SK_ADDR_ILLEGAL_PORT);
-	}
-
-	if (ToPortNumber >= (SK_U32) pAC->GIni.GIMacsFound) {
-		return (SK_ADDR_ILLEGAL_PORT);
-	}
-
-	if (pAC->Rlmt.Port[FromPortNumber].Net != pAC->Rlmt.Port[ToPortNumber].Net) {
-		return (SK_ADDR_ILLEGAL_PORT);
-	}
-
-	/*
-	 * Swap:
-	 * - Exact Match Entries (GEnesis and Yukon)
-	 *   Yukon uses first entry for the logical MAC
-	 *   address (stored in the second GMAC register).
-	 * - FirstExactMatchRlmt (GEnesis only)
-	 * - NextExactMatchRlmt (GEnesis only)
-	 * - FirstExactMatchDrv (GEnesis only)
-	 * - NextExactMatchDrv (GEnesis only)
-	 * - 64-bit filter (InexactFilter)
-	 * - Promiscuous Mode
-	 * of ports.
-	 */
-
-	for (i = 0; i < SK_ADDR_EXACT_MATCHES; i++) {
-		MacAddr = pAC->Addr.Port[FromPortNumber].Exact[i];
-		pAC->Addr.Port[FromPortNumber].Exact[i] =
-			pAC->Addr.Port[ToPortNumber].Exact[i];
-		pAC->Addr.Port[ToPortNumber].Exact[i] = MacAddr;
-	}
-
-	for (i = 0; i < 8; i++) {
-		Byte = pAC->Addr.Port[FromPortNumber].InexactFilter.Bytes[i];
-		pAC->Addr.Port[FromPortNumber].InexactFilter.Bytes[i] =
-			pAC->Addr.Port[ToPortNumber].InexactFilter.Bytes[i];
-		pAC->Addr.Port[ToPortNumber].InexactFilter.Bytes[i] = Byte;
-	}
-	
-	i = pAC->Addr.Port[FromPortNumber].PromMode;
-	pAC->Addr.Port[FromPortNumber].PromMode = pAC->Addr.Port[ToPortNumber].PromMode;
-	pAC->Addr.Port[ToPortNumber].PromMode = i;
-	
-	if (pAC->GIni.GIGenesis) {
-		DWord = pAC->Addr.Port[FromPortNumber].FirstExactMatchRlmt;
-		pAC->Addr.Port[FromPortNumber].FirstExactMatchRlmt =
-			pAC->Addr.Port[ToPortNumber].FirstExactMatchRlmt;
-		pAC->Addr.Port[ToPortNumber].FirstExactMatchRlmt = DWord;
-		
-		DWord = pAC->Addr.Port[FromPortNumber].NextExactMatchRlmt;
-		pAC->Addr.Port[FromPortNumber].NextExactMatchRlmt =
-			pAC->Addr.Port[ToPortNumber].NextExactMatchRlmt;
-		pAC->Addr.Port[ToPortNumber].NextExactMatchRlmt = DWord;
-		
-		DWord = pAC->Addr.Port[FromPortNumber].FirstExactMatchDrv;
-		pAC->Addr.Port[FromPortNumber].FirstExactMatchDrv =
-			pAC->Addr.Port[ToPortNumber].FirstExactMatchDrv;
-		pAC->Addr.Port[ToPortNumber].FirstExactMatchDrv = DWord;
-		
-		DWord = pAC->Addr.Port[FromPortNumber].NextExactMatchDrv;
-		pAC->Addr.Port[FromPortNumber].NextExactMatchDrv =
-			pAC->Addr.Port[ToPortNumber].NextExactMatchDrv;
-		pAC->Addr.Port[ToPortNumber].NextExactMatchDrv = DWord;
-	}
-	
-	/* CAUTION: Solution works if only ports of one adapter are in use. */
-	for (i = 0; (SK_U32) i < pAC->Rlmt.Net[pAC->Rlmt.Port[ToPortNumber].
-		Net->NetNumber].NumPorts; i++) {
-		if (pAC->Rlmt.Net[pAC->Rlmt.Port[ToPortNumber].Net->NetNumber].
-			Port[i]->PortNumber == ToPortNumber) {
-			pAC->Addr.Net[pAC->Rlmt.Port[ToPortNumber].Net->NetNumber].
-				ActivePort = i;
-			/* 20001207 RA: Was "ToPortNumber;". */
-		}
-	}
-	
-	(void) SkAddrMcUpdate(pAC, IoC, FromPortNumber);
-	(void) SkAddrMcUpdate(pAC, IoC, ToPortNumber);
-
-	return (SK_ADDR_SUCCESS);
-	
-}	/* SkAddrSwap */
-
-#endif /* !SK_SLIM */
-
-#ifdef __cplusplus
-}
-#endif	/* __cplusplus */
-