iwlagn: reduce redundant parameter definitions

move paramater definitions to a device paramater structure only
leaving the device name, which antennas are used and what firmware
file to use in the iwl_cfg structure.  this will not completely
remove the redundancies but greatly reduce them for devices that
only vary by name or antennas.  the parameters that are more
likely to change within a given device family are left in iwl_cfg.
also separate bt param structure added to help reduce more.

Signed-off-by: Jay Sternberg <jay.e.sternberg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>

1 files changed, 74 insertions, 55 deletions

diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h
index 5daa189..6228b1c 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.h
+++ b/drivers/net/wireless/iwlwifi/iwl-core.h
@@ -255,20 +255,12 @@ struct iwl_mod_params {
 	int restart_fw;		/* def: 1 = restart firmware */
 };
 
-/**
- * struct iwl_cfg
- * @fw_name_pre: Firmware filename prefix. The api version and extension
- * 	(.ucode) will be added to filename before loading from disk. The
- * 	filename is constructed as fw_name_pre<api>.ucode.
- * @ucode_api_max: Highest version of uCode API supported by driver.
- * @ucode_api_min: Lowest version of uCode API supported by driver.
- * @pa_type: used by 6000 series only to identify the type of Power Amplifier
+/*
  * @max_ll_items: max number of OTP blocks
  * @shadow_ram_support: shadow support for OTP memory
  * @led_compensation: compensate on the led on/off time per HW according
  *	to the deviation to achieve the desired led frequency.
  *	The detail algorithm is described in iwl-led.c
- * @use_rts_for_aggregation: use rts/cts protection for HT traffic
  * @chain_noise_num_beacons: number of beacons used to compute chain noise
  * @adv_thermal_throttle: support advance thermal throttle
  * @support_ct_kill_exit: support ct kill exit condition
@@ -286,15 +278,73 @@ struct iwl_mod_params {
  *	sensitivity calibration operation
  * @chain_noise_calib_by_driver: driver has the capability to perform
  *	chain noise calibration operation
- * @scan_antennas: available antenna for scan operation
+*/
+struct iwl_base_params {
+	int eeprom_size;
+	int num_of_queues;	/* def: HW dependent */
+	int num_of_ampdu_queues;/* def: HW dependent */
+	/* for iwl_apm_init() */
+	u32 pll_cfg_val;
+	bool set_l0s;
+	bool use_bsm;
+
+	bool use_isr_legacy;
+	const u16 max_ll_items;
+	const bool shadow_ram_support;
+	u16 led_compensation;
+	const bool broken_powersave;
+	int chain_noise_num_beacons;
+	const bool supports_idle;
+	bool adv_thermal_throttle;
+	bool support_ct_kill_exit;
+	const bool support_wimax_coexist;
+	u8 plcp_delta_threshold;
+	s32 chain_noise_scale;
+	/* timer period for monitor the driver queues */
+	u32 monitor_recover_period;
+	bool temperature_kelvin;
+	u32 max_event_log_size;
+	const bool tx_power_by_driver;
+	const bool ucode_tracing;
+	const bool sensitivity_calib_by_driver;
+	const bool chain_noise_calib_by_driver;
+};
+/*
  * @advanced_bt_coexist: support advanced bt coexist
  * @bt_init_traffic_load: specify initial bt traffic load
  * @bt_prio_boost: default bt priority boost value
- * @need_dc_calib: need to perform init dc calibration
  * @bt_statistics: use BT version of statistics notification
  * @agg_time_limit: maximum number of uSec in aggregation
  * @ampdu_factor: Maximum A-MPDU length factor
  * @ampdu_density: Minimum A-MPDU spacing
+*/
+struct iwl_bt_params {
+	bool advanced_bt_coexist;
+	u8 bt_init_traffic_load;
+	u8 bt_prio_boost;
+	const bool bt_statistics;
+	u16 agg_time_limit;
+	u8 ampdu_factor;
+	u8 ampdu_density;
+};
+/*
+ * @use_rts_for_aggregation: use rts/cts protection for HT traffic
+*/
+struct iwl_ht_params {
+	const bool ht_greenfield_support; /* if used set to true */
+	bool use_rts_for_aggregation;
+};
+
+/**
+ * struct iwl_cfg
+ * @fw_name_pre: Firmware filename prefix. The api version and extension
+ *	(.ucode) will be added to filename before loading from disk. The
+ *	filename is constructed as fw_name_pre<api>.ucode.
+ * @ucode_api_max: Highest version of uCode API supported by driver.
+ * @ucode_api_min: Lowest version of uCode API supported by driver.
+ * @pa_type: used by 6000 series only to identify the type of Power Amplifier
+ * @need_dc_calib: need to perform init dc calibration
+ * @scan_antennas: available antenna for scan operation
  *
  * We enable the driver to be backward compatible wrt API version. The
  * driver specifies which APIs it supports (with @ucode_api_max being the
@@ -305,9 +355,9 @@ struct iwl_mod_params {
  *
  * For example,
  * if (IWL_UCODE_API(priv->ucode_ver) >= 2) {
- * 	Driver interacts with Firmware API version >= 2.
+ *	Driver interacts with Firmware API version >= 2.
  * } else {
- * 	Driver interacts with Firmware API version 1.
+ *	Driver interacts with Firmware API version 1.
  * }
  *
  * The ideal usage of this infrastructure is to treat a new ucode API
@@ -318,59 +368,28 @@ struct iwl_mod_params {
  *
  */
 struct iwl_cfg {
+	/* params specific to an individual device within a device family */
 	const char *name;
 	const char *fw_name_pre;
 	const unsigned int ucode_api_max;
 	const unsigned int ucode_api_min;
+	u8   valid_tx_ant;
+	u8   valid_rx_ant;
 	unsigned int sku;
-	int eeprom_size;
 	u16  eeprom_ver;
 	u16  eeprom_calib_ver;
-	int num_of_queues;	/* def: HW dependent */
-	int num_of_ampdu_queues;/* def: HW dependent */
 	const struct iwl_ops *ops;
+	/* module based parameters which can be set from modprobe cmd */
 	const struct iwl_mod_params *mod_params;
-	u8   valid_tx_ant;
-	u8   valid_rx_ant;
-
-	/* for iwl_apm_init() */
-	u32 pll_cfg_val;
-	bool set_l0s;
-	bool use_bsm;
-
-	bool use_isr_legacy;
-	enum iwl_pa_type pa_type;
-	const u16 max_ll_items;
-	const bool shadow_ram_support;
-	const bool ht_greenfield_support;
-	u16 led_compensation;
-	const bool broken_powersave;
-	bool use_rts_for_aggregation;
-	int chain_noise_num_beacons;
-	const bool supports_idle;
-	bool adv_thermal_throttle;
-	bool support_ct_kill_exit;
-	const bool support_wimax_coexist;
-	u8 plcp_delta_threshold;
-	s32 chain_noise_scale;
-	/* timer period for monitor the driver queues */
-	u32 monitor_recover_period;
-	bool temperature_kelvin;
-	u32 max_event_log_size;
-	const bool tx_power_by_driver;
-	const bool ucode_tracing;
-	const bool sensitivity_calib_by_driver;
-	const bool chain_noise_calib_by_driver;
+	/* params not likely to change within a device family */
+	struct iwl_base_params *base_params;
+	/* params likely to change within a device family */
+	struct iwl_ht_params *ht_params;
+	struct iwl_bt_params *bt_params;
+	enum iwl_pa_type pa_type;	  /* if used set to IWL_PA_SYSTEM */
+	const bool need_dc_calib;	  /* if used set to true */
 	u8 scan_rx_antennas[IEEE80211_NUM_BANDS];
 	u8 scan_tx_antennas[IEEE80211_NUM_BANDS];
-	bool advanced_bt_coexist;
-	u8 bt_init_traffic_load;
-	u8 bt_prio_boost;
-	const bool need_dc_calib;
-	const bool bt_statistics;
-	u16 agg_time_limit;
-	u8 ampdu_factor;
-	u8 ampdu_density;
 };
 
 /***************************