orinoco: Move sources to a subdirectory

Keeping all the orinoco drivers in a common directory will make
maintenance easier.

Signed-off by: David Kilroy <kilroyd@googlemail.com>

Signed-off-by: John W. Linville <linville@tuxdriver.com>

1 files changed, 533 insertions, 0 deletions

diff --git a/drivers/net/wireless/orinoco/orinoco_cs.c b/drivers/net/wireless/orinoco/orinoco_cs.c
new file mode 100644
index 0000000..6fcf2bd
--- /dev/null
+++ b/drivers/net/wireless/orinoco/orinoco_cs.c
@@ -0,0 +1,533 @@
+/* orinoco_cs.c (formerly known as dldwd_cs.c)
+ *
+ * A driver for "Hermes" chipset based PCMCIA wireless adaptors, such
+ * as the Lucent WavelanIEEE/Orinoco cards and their OEM (Cabletron/
+ * EnteraSys RoamAbout 802.11, ELSA Airlancer, Melco Buffalo and others).
+ * It should also be usable on various Prism II based cards such as the
+ * Linksys, D-Link and Farallon Skyline. It should also work on Symbol
+ * cards such as the 3Com AirConnect and Ericsson WLAN.
+ * 
+ * Copyright notice & release notes in file orinoco.c
+ */
+
+#define DRIVER_NAME "orinoco_cs"
+#define PFX DRIVER_NAME ": "
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <pcmcia/cs_types.h>
+#include <pcmcia/cs.h>
+#include <pcmcia/cistpl.h>
+#include <pcmcia/cisreg.h>
+#include <pcmcia/ds.h>
+
+#include "orinoco.h"
+
+/********************************************************************/
+/* Module stuff							    */
+/********************************************************************/
+
+MODULE_AUTHOR("David Gibson <hermes@gibson.dropbear.id.au>");
+MODULE_DESCRIPTION("Driver for PCMCIA Lucent Orinoco, Prism II based and similar wireless cards");
+MODULE_LICENSE("Dual MPL/GPL");
+
+/* Module parameters */
+
+/* Some D-Link cards have buggy CIS. They do work at 5v properly, but
+ * don't have any CIS entry for it. This workaround it... */
+static int ignore_cis_vcc; /* = 0 */
+module_param(ignore_cis_vcc, int, 0);
+MODULE_PARM_DESC(ignore_cis_vcc, "Allow voltage mismatch between card and socket");
+
+/********************************************************************/
+/* Data structures						    */
+/********************************************************************/
+
+/* PCMCIA specific device information (goes in the card field of
+ * struct orinoco_private */
+struct orinoco_pccard {
+	struct pcmcia_device	*p_dev;
+	dev_node_t node;
+
+	/* Used to handle hard reset */
+	/* yuck, we need this hack to work around the insanity of the
+         * PCMCIA layer */
+	unsigned long hard_reset_in_progress; 
+};
+
+
+/********************************************************************/
+/* Function prototypes						    */
+/********************************************************************/
+
+static int orinoco_cs_config(struct pcmcia_device *link);
+static void orinoco_cs_release(struct pcmcia_device *link);
+static void orinoco_cs_detach(struct pcmcia_device *p_dev);
+
+/********************************************************************/
+/* Device methods     						    */
+/********************************************************************/
+
+static int
+orinoco_cs_hard_reset(struct orinoco_private *priv)
+{
+	struct orinoco_pccard *card = priv->card;
+	struct pcmcia_device *link = card->p_dev;
+	int err;
+
+	/* We need atomic ops here, because we're not holding the lock */
+	set_bit(0, &card->hard_reset_in_progress);
+
+	err = pcmcia_reset_card(link->socket);
+	if (err)
+		return err;
+
+	msleep(100);
+	clear_bit(0, &card->hard_reset_in_progress);
+
+	return 0;
+}
+
+/********************************************************************/
+/* PCMCIA stuff     						    */
+/********************************************************************/
+
+/*
+ * This creates an "instance" of the driver, allocating local data
+ * structures for one device.  The device is registered with Card
+ * Services.
+ * 
+ * The dev_link structure is initialized, but we don't actually
+ * configure the card at this point -- we wait until we receive a card
+ * insertion event.  */
+static int
+orinoco_cs_probe(struct pcmcia_device *link)
+{
+	struct net_device *dev;
+	struct orinoco_private *priv;
+	struct orinoco_pccard *card;
+
+	dev = alloc_orinocodev(sizeof(*card), &handle_to_dev(link),
+			       orinoco_cs_hard_reset, NULL);
+	if (! dev)
+		return -ENOMEM;
+	priv = netdev_priv(dev);
+	card = priv->card;
+
+	/* Link both structures together */
+	card->p_dev = link;
+	link->priv = dev;
+
+	/* Interrupt setup */
+	link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_HANDLE_PRESENT;
+	link->irq.IRQInfo1 = IRQ_LEVEL_ID;
+	link->irq.Handler = orinoco_interrupt;
+	link->irq.Instance = dev; 
+
+	/* General socket configuration defaults can go here.  In this
+	 * client, we assume very little, and rely on the CIS for
+	 * almost everything.  In most clients, many details (i.e.,
+	 * number, sizes, and attributes of IO windows) are fixed by
+	 * the nature of the device, and can be hard-wired here. */
+	link->conf.Attributes = 0;
+	link->conf.IntType = INT_MEMORY_AND_IO;
+
+	return orinoco_cs_config(link);
+}				/* orinoco_cs_attach */
+
+/*
+ * This deletes a driver "instance".  The device is de-registered with
+ * Card Services.  If it has been released, all local data structures
+ * are freed.  Otherwise, the structures will be freed when the device
+ * is released.
+ */
+static void orinoco_cs_detach(struct pcmcia_device *link)
+{
+	struct net_device *dev = link->priv;
+
+	if (link->dev_node)
+		unregister_netdev(dev);
+
+	orinoco_cs_release(link);
+
+	free_orinocodev(dev);
+}				/* orinoco_cs_detach */
+
+/*
+ * orinoco_cs_config() is scheduled to run after a CARD_INSERTION
+ * event is received, to configure the PCMCIA socket, and to make the
+ * device available to the system.
+ */
+
+#define CS_CHECK(fn, ret) do { \
+		last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; \
+	} while (0)
+
+static int orinoco_cs_config_check(struct pcmcia_device *p_dev,
+				   cistpl_cftable_entry_t *cfg,
+				   cistpl_cftable_entry_t *dflt,
+				   unsigned int vcc,
+				   void *priv_data)
+{
+	if (cfg->index == 0)
+		goto next_entry;
+
+	/* Use power settings for Vcc and Vpp if present */
+	/* Note that the CIS values need to be rescaled */
+	if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
+		if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) {
+			DEBUG(2, "spectrum_cs_config: Vcc mismatch (vcc = %d, CIS = %d)\n",  vcc, cfg->vcc.param[CISTPL_POWER_VNOM] / 10000);
+			if (!ignore_cis_vcc)
+				goto next_entry;
+		}
+	} else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) {
+		if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM] / 10000) {
+			DEBUG(2, "spectrum_cs_config: Vcc mismatch (vcc = %d, CIS = %d)\n",  vcc, dflt->vcc.param[CISTPL_POWER_VNOM] / 10000);
+			if (!ignore_cis_vcc)
+				goto next_entry;
+		}
+	}
+
+	if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
+		p_dev->conf.Vpp =
+			cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
+	else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM))
+		p_dev->conf.Vpp =
+			dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000;
+
+	/* Do we need to allocate an interrupt? */
+	p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
+
+	/* IO window settings */
+	p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+	if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
+		cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
+		p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
+		if (!(io->flags & CISTPL_IO_8BIT))
+			p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
+		if (!(io->flags & CISTPL_IO_16BIT))
+			p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
+		p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
+		p_dev->io.BasePort1 = io->win[0].base;
+		p_dev->io.NumPorts1 = io->win[0].len;
+		if (io->nwin > 1) {
+			p_dev->io.Attributes2 = p_dev->io.Attributes1;
+			p_dev->io.BasePort2 = io->win[1].base;
+			p_dev->io.NumPorts2 = io->win[1].len;
+		}
+
+		/* This reserves IO space but doesn't actually enable it */
+		if (pcmcia_request_io(p_dev, &p_dev->io) != 0)
+			goto next_entry;
+	}
+	return 0;
+
+next_entry:
+	pcmcia_disable_device(p_dev);
+	return -ENODEV;
+};
+
+static int
+orinoco_cs_config(struct pcmcia_device *link)
+{
+	struct net_device *dev = link->priv;
+	struct orinoco_private *priv = netdev_priv(dev);
+	struct orinoco_pccard *card = priv->card;
+	hermes_t *hw = &priv->hw;
+	int last_fn, last_ret;
+	void __iomem *mem;
+
+	/*
+	 * In this loop, we scan the CIS for configuration table
+	 * entries, each of which describes a valid card
+	 * configuration, including voltage, IO window, memory window,
+	 * and interrupt settings.
+	 *
+	 * We make no assumptions about the card to be configured: we
+	 * use just the information available in the CIS.  In an ideal
+	 * world, this would work for any PCMCIA card, but it requires
+	 * a complete and accurate CIS.  In practice, a driver usually
+	 * "knows" most of these things without consulting the CIS,
+	 * and most client drivers will only use the CIS to fill in
+	 * implementation-defined details.
+	 */
+	last_ret = pcmcia_loop_config(link, orinoco_cs_config_check, NULL);
+	if (last_ret) {
+		if (!ignore_cis_vcc)
+			printk(KERN_ERR PFX "GetNextTuple(): No matching "
+			       "CIS configuration.  Maybe you need the "
+			       "ignore_cis_vcc=1 parameter.\n");
+		cs_error(link, RequestIO, last_ret);
+		goto failed;
+	}
+
+	/*
+	 * Allocate an interrupt line.  Note that this does not assign
+	 * a handler to the interrupt, unless the 'Handler' member of
+	 * the irq structure is initialized.
+	 */
+	CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
+
+	/* We initialize the hermes structure before completing PCMCIA
+	 * configuration just in case the interrupt handler gets
+	 * called. */
+	mem = ioport_map(link->io.BasePort1, link->io.NumPorts1);
+	if (!mem)
+		goto cs_failed;
+
+	hermes_struct_init(hw, mem, HERMES_16BIT_REGSPACING);
+
+	/*
+	 * This actually configures the PCMCIA socket -- setting up
+	 * the I/O windows and the interrupt mapping, and putting the
+	 * card and host interface into "Memory and IO" mode.
+	 */
+	CS_CHECK(RequestConfiguration,
+		 pcmcia_request_configuration(link, &link->conf));
+
+	/* Ok, we have the configuration, prepare to register the netdev */
+	dev->base_addr = link->io.BasePort1;
+	dev->irq = link->irq.AssignedIRQ;
+	card->node.major = card->node.minor = 0;
+
+	SET_NETDEV_DEV(dev, &handle_to_dev(link));
+	/* Tell the stack we exist */
+	if (register_netdev(dev) != 0) {
+		printk(KERN_ERR PFX "register_netdev() failed\n");
+		goto failed;
+	}
+
+	/* At this point, the dev_node_t structure(s) needs to be
+	 * initialized and arranged in a linked list at link->dev_node. */
+	strcpy(card->node.dev_name, dev->name);
+	link->dev_node = &card->node; /* link->dev_node being non-NULL is also
+                                    used to indicate that the
+                                    net_device has been registered */
+
+	/* Finally, report what we've done */
+	printk(KERN_DEBUG "%s: " DRIVER_NAME " at %s, irq %d, io "
+	       "0x%04x-0x%04x\n", dev->name, dev->dev.parent->bus_id,
+	       link->irq.AssignedIRQ, link->io.BasePort1,
+	       link->io.BasePort1 + link->io.NumPorts1 - 1);
+	return 0;
+
+ cs_failed:
+	cs_error(link, last_fn, last_ret);
+
+ failed:
+	orinoco_cs_release(link);
+	return -ENODEV;
+}				/* orinoco_cs_config */
+
+/*
+ * After a card is removed, orinoco_cs_release() will unregister the
+ * device, and release the PCMCIA configuration.  If the device is
+ * still open, this will be postponed until it is closed.
+ */
+static void
+orinoco_cs_release(struct pcmcia_device *link)
+{
+	struct net_device *dev = link->priv;
+	struct orinoco_private *priv = netdev_priv(dev);
+	unsigned long flags;
+
+	/* We're committed to taking the device away now, so mark the
+	 * hardware as unavailable */
+	spin_lock_irqsave(&priv->lock, flags);
+	priv->hw_unavailable++;
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	pcmcia_disable_device(link);
+	if (priv->hw.iobase)
+		ioport_unmap(priv->hw.iobase);
+}				/* orinoco_cs_release */
+
+static int orinoco_cs_suspend(struct pcmcia_device *link)
+{
+	struct net_device *dev = link->priv;
+	struct orinoco_private *priv = netdev_priv(dev);
+	struct orinoco_pccard *card = priv->card;
+	int err = 0;
+	unsigned long flags;
+
+	/* This is probably racy, but I can't think of
+	   a better way, short of rewriting the PCMCIA
+	   layer to not suck :-( */
+	if (! test_bit(0, &card->hard_reset_in_progress)) {
+		spin_lock_irqsave(&priv->lock, flags);
+
+		err = __orinoco_down(dev);
+		if (err)
+			printk(KERN_WARNING "%s: Error %d downing interface\n",
+			       dev->name, err);
+
+		netif_device_detach(dev);
+		priv->hw_unavailable++;
+
+		spin_unlock_irqrestore(&priv->lock, flags);
+	}
+
+	return 0;
+}
+
+static int orinoco_cs_resume(struct pcmcia_device *link)
+{
+	struct net_device *dev = link->priv;
+	struct orinoco_private *priv = netdev_priv(dev);
+	struct orinoco_pccard *card = priv->card;
+	int err = 0;
+	unsigned long flags;
+
+	if (! test_bit(0, &card->hard_reset_in_progress)) {
+		err = orinoco_reinit_firmware(dev);
+		if (err) {
+			printk(KERN_ERR "%s: Error %d re-initializing firmware\n",
+			       dev->name, err);
+			return -EIO;
+		}
+
+		spin_lock_irqsave(&priv->lock, flags);
+
+		netif_device_attach(dev);
+		priv->hw_unavailable--;
+
+		if (priv->open && ! priv->hw_unavailable) {
+			err = __orinoco_up(dev);
+			if (err)
+				printk(KERN_ERR "%s: Error %d restarting card\n",
+				       dev->name, err);
+		}
+
+		spin_unlock_irqrestore(&priv->lock, flags);
+	}
+
+	return err;
+}
+
+
+/********************************************************************/
+/* Module initialization					    */
+/********************************************************************/
+
+/* Can't be declared "const" or the whole __initdata section will
+ * become const */
+static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION
+	" (David Gibson <hermes@gibson.dropbear.id.au>, "
+	"Pavel Roskin <proski@gnu.org>, et al)";
+
+static struct pcmcia_device_id orinoco_cs_ids[] = {
+	PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7100), /* SonicWALL Long Range Wireless Card */
+	PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7300), /* Sohoware NCP110, Philips 802.11b */
+	PCMCIA_DEVICE_MANF_CARD(0x0089, 0x0002), /* AnyPoint(TM) Wireless II PC Card */
+	PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0777), /* 3Com AirConnect PCI 777A */
+	PCMCIA_DEVICE_MANF_CARD(0x0126, 0x8000), /* PROXIM RangeLAN-DS/LAN PC CARD */
+	PCMCIA_DEVICE_MANF_CARD(0x0138, 0x0002), /* Compaq WL100 11 Mbps Wireless Adapter */
+	PCMCIA_DEVICE_MANF_CARD(0x0156, 0x0002), /* Lucent Orinoco and old Intersil */
+	PCMCIA_DEVICE_MANF_CARD(0x016b, 0x0001), /* Ericsson WLAN Card C11 */
+	PCMCIA_DEVICE_MANF_CARD(0x01eb, 0x080a), /* Nortel Networks eMobility 802.11 Wireless Adapter */
+	PCMCIA_DEVICE_MANF_CARD(0x01ff, 0x0008), /* Intermec MobileLAN 11Mbps 802.11b WLAN Card */
+	PCMCIA_DEVICE_MANF_CARD(0x0250, 0x0002), /* Samsung SWL2000-N 11Mb/s WLAN Card */
+	PCMCIA_DEVICE_MANF_CARD(0x0261, 0x0002), /* AirWay 802.11 Adapter (PCMCIA) */
+	PCMCIA_DEVICE_MANF_CARD(0x0268, 0x0001), /* ARtem Onair */
+	PCMCIA_DEVICE_MANF_CARD(0x026f, 0x0305), /* Buffalo WLI-PCM-S11 */
+	PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1612), /* Linksys WPC11 Version 2.5 */
+	PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1613), /* Linksys WPC11 Version 3 */
+	PCMCIA_DEVICE_MANF_CARD(0x028a, 0x0002), /* Compaq HNW-100 11 Mbps Wireless Adapter */
+	PCMCIA_DEVICE_MANF_CARD(0x028a, 0x0673), /* Linksys WCF12 Wireless CompactFlash Card */
+	PCMCIA_DEVICE_MANF_CARD(0x02aa, 0x0002), /* ASUS SpaceLink WL-100 */
+	PCMCIA_DEVICE_MANF_CARD(0x02ac, 0x0002), /* SpeedStream SS1021 Wireless Adapter */
+	PCMCIA_DEVICE_MANF_CARD(0x02ac, 0x3021), /* SpeedStream Wireless Adapter */
+	PCMCIA_DEVICE_MANF_CARD(0x14ea, 0xb001), /* PLANEX RoadLannerWave GW-NS11H */
+	PCMCIA_DEVICE_MANF_CARD(0x50c2, 0x7300), /* Airvast WN-100 */
+	PCMCIA_DEVICE_MANF_CARD(0x9005, 0x0021), /* Adaptec Ultra Wireless ANW-8030 */
+	PCMCIA_DEVICE_MANF_CARD(0xc001, 0x0008), /* CONTEC FLEXSCAN/FX-DDS110-PCC */
+	PCMCIA_DEVICE_MANF_CARD(0xc250, 0x0002), /* Conceptronic CON11Cpro, EMTAC A2424i */
+	PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0002), /* Safeway 802.11b, ZCOMAX AirRunner/XI-300 */
+	PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0005), /* D-Link DCF660, Sandisk Connect SDWCFB-000 */
+	PCMCIA_DEVICE_PROD_ID12(" ", "IEEE 802.11 Wireless LAN/PC Card", 0x3b6e20c8, 0xefccafe9),
+	PCMCIA_DEVICE_PROD_ID12("3Com", "3CRWE737A AirConnect Wireless LAN PC Card", 0x41240e5b, 0x56010af3),
+	PCMCIA_DEVICE_PROD_ID12("ACTIONTEC", "PRISM Wireless LAN PC Card", 0x393089da, 0xa71e69d5),
+	PCMCIA_DEVICE_PROD_ID12("Addtron", "AWP-100 Wireless PCMCIA", 0xe6ec52ce, 0x08649af2),
+	PCMCIA_DEVICE_PROD_ID123("AIRVAST", "IEEE 802.11b Wireless PCMCIA Card", "HFA3863", 0xea569531, 0x4bcb9645, 0x355cb092),
+	PCMCIA_DEVICE_PROD_ID12("Allied Telesyn", "AT-WCL452 Wireless PCMCIA Radio", 0x5cd01705, 0x4271660f),
+	PCMCIA_DEVICE_PROD_ID12("ASUS", "802_11b_PC_CARD_25", 0x78fc06ee, 0xdb9aa842),
+	PCMCIA_DEVICE_PROD_ID12("ASUS", "802_11B_CF_CARD_25", 0x78fc06ee, 0x45a50c1e),
+	PCMCIA_DEVICE_PROD_ID12("Avaya Communication", "Avaya Wireless PC Card", 0xd8a43b78, 0x0d341169),
+	PCMCIA_DEVICE_PROD_ID12("BENQ", "AWL100 PCMCIA ADAPTER", 0x35dadc74, 0x01f7fedb),
+	PCMCIA_DEVICE_PROD_ID12("BUFFALO", "WLI-PCM-L11G", 0x2decece3, 0xf57ca4b3),
+	PCMCIA_DEVICE_PROD_ID12("BUFFALO", "WLI-CF-S11G", 0x2decece3, 0x82067c18),
+	PCMCIA_DEVICE_PROD_ID12("Cabletron", "RoamAbout 802.11 DS", 0x32d445f5, 0xedeffd90),
+	PCMCIA_DEVICE_PROD_ID12("Compaq", "WL200_11Mbps_Wireless_PCI_Card", 0x54f7c49c, 0x15a75e5b),
+	PCMCIA_DEVICE_PROD_ID123("corega", "WL PCCL-11", "ISL37300P", 0x0a21501a, 0x59868926, 0xc9049a39),
+	PCMCIA_DEVICE_PROD_ID12("corega K.K.", "Wireless LAN PCC-11", 0x5261440f, 0xa6405584),
+	PCMCIA_DEVICE_PROD_ID12("corega K.K.", "Wireless LAN PCCA-11", 0x5261440f, 0xdf6115f9),
+	PCMCIA_DEVICE_PROD_ID12("corega_K.K.", "Wireless_LAN_PCCB-11", 0x29e33311, 0xee7a27ae),
+	PCMCIA_DEVICE_PROD_ID12("D", "Link DRC-650 11Mbps WLAN Card", 0x71b18589, 0xf144e3ac),
+	PCMCIA_DEVICE_PROD_ID12("D", "Link DWL-650 11Mbps WLAN Card", 0x71b18589, 0xb6f1b0ab),
+	PCMCIA_DEVICE_PROD_ID12("D-Link Corporation", "D-Link DWL-650H 11Mbps WLAN Adapter", 0xef544d24, 0xcd8ea916),
+	PCMCIA_DEVICE_PROD_ID12("Digital Data Communications", "WPC-0100", 0xfdd73470, 0xe0b6f146),
+	PCMCIA_DEVICE_PROD_ID12("ELSA", "AirLancer MC-11", 0x4507a33a, 0xef54f0e3),
+	PCMCIA_DEVICE_PROD_ID12("HyperLink", "Wireless PC Card 11Mbps", 0x56cc3f1a, 0x0bcf220c),
+	PCMCIA_DEVICE_PROD_ID123("Instant Wireless ", " Network PC CARD", "Version 01.02", 0x11d901af, 0x6e9bd926, 0x4b74baa0),
+	PCMCIA_DEVICE_PROD_ID12("Intel", "PRO/Wireless 2011 LAN PC Card", 0x816cc815, 0x07f58077),
+	PCMCIA_DEVICE_PROD_ID12("INTERSIL", "HFA384x/IEEE", 0x74c5e40d, 0xdb472a18),
+	PCMCIA_DEVICE_PROD_ID12("INTERSIL", "I-GATE 11M PC Card / PC Card plus", 0x74c5e40d, 0x8304ff77),
+	PCMCIA_DEVICE_PROD_ID12("Intersil", "PRISM 2_5 PCMCIA ADAPTER", 0x4b801a17, 0x6345a0bf),
+	PCMCIA_DEVICE_PROD_ID123("Intersil", "PRISM Freedom PCMCIA Adapter", "ISL37100P", 0x4b801a17, 0xf222ec2d, 0x630d52b2),
+	PCMCIA_DEVICE_PROD_ID12("LeArtery", "SYNCBYAIR 11Mbps Wireless LAN PC Card", 0x7e3b326a, 0x49893e92),
+	PCMCIA_DEVICE_PROD_ID12("Linksys", "Wireless CompactFlash Card", 0x0733cc81, 0x0c52f395),
+	PCMCIA_DEVICE_PROD_ID12("Lucent Technologies", "WaveLAN/IEEE", 0x23eb9949, 0xc562e72a),
+	PCMCIA_DEVICE_PROD_ID12("MELCO", "WLI-PCM-L11", 0x481e0094, 0x7360e410),
+	PCMCIA_DEVICE_PROD_ID12("MELCO", "WLI-PCM-L11G", 0x481e0094, 0xf57ca4b3),
+	PCMCIA_DEVICE_PROD_ID12("Microsoft", "Wireless Notebook Adapter MN-520", 0x5961bf85, 0x6eec8c01),
+	PCMCIA_DEVICE_PROD_ID12("NCR", "WaveLAN/IEEE", 0x24358cd4, 0xc562e72a),
+	PCMCIA_DEVICE_PROD_ID12("NETGEAR MA401 Wireless PC", "Card", 0xa37434e9, 0x9762e8f1),
+	PCMCIA_DEVICE_PROD_ID12("NETGEAR MA401RA Wireless PC", "Card", 0x0306467f, 0x9762e8f1),
+	PCMCIA_DEVICE_PROD_ID12("Nortel Networks", "emobility 802.11 Wireless LAN PC Card", 0x2d617ea0, 0x88cd5767),
+	PCMCIA_DEVICE_PROD_ID12("OEM", "PRISM2 IEEE 802.11 PC-Card", 0xfea54c90, 0x48f2bdd6),
+	PCMCIA_DEVICE_PROD_ID12("OTC", "Wireless AirEZY 2411-PCC WLAN Card", 0x4ac44287, 0x235a6bed),
+	PCMCIA_DEVICE_PROD_ID123("PCMCIA", "11M WLAN Card v2.5", "ISL37300P", 0x281f1c5d, 0x6e440487, 0xc9049a39),
+	PCMCIA_DEVICE_PROD_ID12("PLANEX", "GeoWave/GW-CF110", 0x209f40ab, 0xd9715264),
+	PCMCIA_DEVICE_PROD_ID12("PLANEX", "GeoWave/GW-NS110", 0x209f40ab, 0x46263178),
+	PCMCIA_DEVICE_PROD_ID12("PROXIM", "LAN PC CARD HARMONY 80211B", 0xc6536a5e, 0x090c3cd9),
+	PCMCIA_DEVICE_PROD_ID12("PROXIM", "LAN PCI CARD HARMONY 80211B", 0xc6536a5e, 0x9f494e26),
+	PCMCIA_DEVICE_PROD_ID12("SAMSUNG", "11Mbps WLAN Card", 0x43d74cb4, 0x579bd91b),
+	PCMCIA_DEVICE_PROD_ID12("SMC", "SMC2532W-B EliteConnect Wireless Adapter", 0xc4f8b18b, 0x196bd757),
+	PCMCIA_DEVICE_PROD_ID12("SMC", "SMC2632W", 0xc4f8b18b, 0x474a1f2a),
+	PCMCIA_DEVICE_PROD_ID12("Symbol Technologies", "LA4111 Spectrum24 Wireless LAN PC Card", 0x3f02b4d6, 0x3663cb0e),
+	PCMCIA_DEVICE_PROD_ID123("The Linksys Group, Inc.", "Instant Wireless Network PC Card", "ISL37300P", 0xa5f472c2, 0x590eb502, 0xc9049a39),
+	PCMCIA_DEVICE_PROD_ID12("ZoomAir 11Mbps High", "Rate wireless Networking", 0x273fe3db, 0x32a1eaee),
+	PCMCIA_DEVICE_NULL,
+};
+MODULE_DEVICE_TABLE(pcmcia, orinoco_cs_ids);
+
+static struct pcmcia_driver orinoco_driver = {
+	.owner		= THIS_MODULE,
+	.drv		= {
+		.name	= DRIVER_NAME,
+	},
+	.probe		= orinoco_cs_probe,
+	.remove		= orinoco_cs_detach,
+	.id_table       = orinoco_cs_ids,
+	.suspend	= orinoco_cs_suspend,
+	.resume		= orinoco_cs_resume,
+};
+
+static int __init
+init_orinoco_cs(void)
+{
+	printk(KERN_DEBUG "%s\n", version);
+
+	return pcmcia_register_driver(&orinoco_driver);
+}
+
+static void __exit
+exit_orinoco_cs(void)
+{
+	pcmcia_unregister_driver(&orinoco_driver);
+}
+
+module_init(init_orinoco_cs);
+module_exit(exit_orinoco_cs);