diff options
| author | Thomas Ilnseher <illth@gmx.de> | 2009-09-14 23:01:33 +0200 |
|---|---|---|
| committer | John W. Linville <linville@tuxdriver.com> | 2009-09-23 11:35:44 -0400 |
| commit | 9308779aad721cab8434fd5f98d3c85d3716fdec (patch) | |
| tree | 58f8f403682c82553c85e7726f28735ad2f2d431 /drivers/net/wireless | |
| parent | 09ebe2f94373e95952ed6340b0a5d21739eb99da (diff) | |
| download | kernel_samsung_tuna-9308779aad721cab8434fd5f98d3c85d3716fdec.zip kernel_samsung_tuna-9308779aad721cab8434fd5f98d3c85d3716fdec.tar.gz kernel_samsung_tuna-9308779aad721cab8434fd5f98d3c85d3716fdec.tar.bz2 | |
b43: Add LP PHY Analog Switch Support
The current verison of b43 uses "b43_phyop_switch_analog_generic" for A,
G and LP phys.
According to the spec, this is the wrong behaviour for the LP PHY
(see: http://bcm-v4.sipsolutions.net/802.11/PHY/Anacore )
While no problems on the x86 plattform where seen, this leads to a crash
on the BCM5354 SoC (MIPS 32 LE plattform).
This patch implements the analog switch for LP PHYs according to the
specs. It fixes the crash
signed-off-by: Thomas Ilnseher <illth@gmx.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Diffstat (limited to 'drivers/net/wireless')
| -rw-r--r-- | drivers/net/wireless/b43/phy_lp.c | 12 |
1 files changed, 11 insertions, 1 deletions
diff --git a/drivers/net/wireless/b43/phy_lp.c b/drivers/net/wireless/b43/phy_lp.c index 3e02d96..1e318d8 100644 --- a/drivers/net/wireless/b43/phy_lp.c +++ b/drivers/net/wireless/b43/phy_lp.c @@ -2228,6 +2228,16 @@ static enum b43_txpwr_result b43_lpphy_op_recalc_txpower(struct b43_wldev *dev, return B43_TXPWR_RES_DONE; } +void b43_lpphy_op_switch_analog(struct b43_wldev *dev, bool on) +{ + if (on) { + b43_phy_mask(dev, B43_LPPHY_AFE_CTL_OVR, 0xfff8); + } else { + b43_phy_set(dev, B43_LPPHY_AFE_CTL_OVRVAL, 0x0007); + b43_phy_set(dev, B43_LPPHY_AFE_CTL_OVR, 0x0007); + } +} + const struct b43_phy_operations b43_phyops_lp = { .allocate = b43_lpphy_op_allocate, .free = b43_lpphy_op_free, @@ -2239,7 +2249,7 @@ const struct b43_phy_operations b43_phyops_lp = { .radio_read = b43_lpphy_op_radio_read, .radio_write = b43_lpphy_op_radio_write, .software_rfkill = b43_lpphy_op_software_rfkill, - .switch_analog = b43_phyop_switch_analog_generic, + .switch_analog = b43_lpphy_op_switch_analog, .switch_channel = b43_lpphy_op_switch_channel, .get_default_chan = b43_lpphy_op_get_default_chan, .set_rx_antenna = b43_lpphy_op_set_rx_antenna, |