aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/serial/mcf.c
diff options
context:
space:
mode:
authorJohn Adamson <jadamson@allen-organ.com>2008-08-22 16:43:49 +1000
committerGreg Ungerer <gerg@uclinux.org>2009-01-27 16:42:00 +1000
commit26a4bc66a6f57299027e04d90b14fe56a44c6d2b (patch)
tree78465b6c8de7c1309f59667455287df9f88f2c76 /drivers/serial/mcf.c
parentc7bcd0df1f2879fcedc3f55323c3afa7bb1f4295 (diff)
downloadkernel_samsung_tuna-26a4bc66a6f57299027e04d90b14fe56a44c6d2b.zip
kernel_samsung_tuna-26a4bc66a6f57299027e04d90b14fe56a44c6d2b.tar.gz
kernel_samsung_tuna-26a4bc66a6f57299027e04d90b14fe56a44c6d2b.tar.bz2
m68knommu: fix ColdFire 5272 serial baud rates in mcf.c
I noticed (the hard way) that the mcf.c driver doesn't support the fractional precision register on the MCF5272. This makes the console dicey at 115200 baud and a system clock of 66.0 MHz. On the other hand, if your hardware is running at 66.666 MHz, it probably isn't a problem. Patch submitted by John Adamson <jadamson@allen-organ.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Diffstat (limited to 'drivers/serial/mcf.c')
-rw-r--r--drivers/serial/mcf.c11
1 files changed, 11 insertions, 0 deletions
diff --git a/drivers/serial/mcf.c b/drivers/serial/mcf.c
index b2001c5..56841fe 100644
--- a/drivers/serial/mcf.c
+++ b/drivers/serial/mcf.c
@@ -212,10 +212,18 @@ static void mcf_set_termios(struct uart_port *port, struct ktermios *termios,
{
unsigned long flags;
unsigned int baud, baudclk;
+#if defined(CONFIG_M5272)
+ unsigned int baudfr;
+#endif
unsigned char mr1, mr2;
baud = uart_get_baud_rate(port, termios, old, 0, 230400);
+#if defined(CONFIG_M5272)
+ baudclk = (MCF_BUSCLK / baud) / 32;
+ baudfr = (((MCF_BUSCLK / baud) + 1) / 2) % 16;
+#else
baudclk = ((MCF_BUSCLK / baud) + 16) / 32;
+#endif
mr1 = MCFUART_MR1_RXIRQRDY | MCFUART_MR1_RXERRCHAR;
mr2 = 0;
@@ -262,6 +270,9 @@ static void mcf_set_termios(struct uart_port *port, struct ktermios *termios,
writeb(mr2, port->membase + MCFUART_UMR);
writeb((baudclk & 0xff00) >> 8, port->membase + MCFUART_UBG1);
writeb((baudclk & 0xff), port->membase + MCFUART_UBG2);
+#if defined(CONFIG_M5272)
+ writeb((baudfr & 0x0f), port->membase + MCFUART_UFPD);
+#endif
writeb(MCFUART_UCSR_RXCLKTIMER | MCFUART_UCSR_TXCLKTIMER,
port->membase + MCFUART_UCSR);
writeb(MCFUART_UCR_RXENABLE | MCFUART_UCR_TXENABLE,