diff options
author | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
commit | 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch) | |
tree | 0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/video/pvr2fb.c | |
download | kernel_samsung_tuna-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.zip kernel_samsung_tuna-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.gz kernel_samsung_tuna-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.bz2 |
Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
Diffstat (limited to 'drivers/video/pvr2fb.c')
-rw-r--r-- | drivers/video/pvr2fb.c | 1125 |
1 files changed, 1125 insertions, 0 deletions
diff --git a/drivers/video/pvr2fb.c b/drivers/video/pvr2fb.c new file mode 100644 index 0000000..31c547f --- /dev/null +++ b/drivers/video/pvr2fb.c @@ -0,0 +1,1125 @@ +/* drivers/video/pvr2fb.c + * + * Frame buffer and fbcon support for the NEC PowerVR2 found within the Sega + * Dreamcast. + * + * Copyright (c) 2001 M. R. Brown <mrbrown@0xd6.org> + * Copyright (c) 2001, 2002, 2003, 2004, 2005 Paul Mundt <lethal@linux-sh.org> + * + * This file is part of the LinuxDC project (linuxdc.sourceforge.net). + * + */ + +/* + * This driver is mostly based on the excellent amifb and vfb sources. It uses + * an odd scheme for converting hardware values to/from framebuffer values, + * here are some hacked-up formulas: + * + * The Dreamcast has screen offsets from each side of its four borders and + * the start offsets of the display window. I used these values to calculate + * 'pseudo' values (think of them as placeholders) for the fb video mode, so + * that when it came time to convert these values back into their hardware + * values, I could just add mode- specific offsets to get the correct mode + * settings: + * + * left_margin = diwstart_h - borderstart_h; + * right_margin = borderstop_h - (diwstart_h + xres); + * upper_margin = diwstart_v - borderstart_v; + * lower_margin = borderstop_v - (diwstart_h + yres); + * + * hsync_len = borderstart_h + (hsync_total - borderstop_h); + * vsync_len = borderstart_v + (vsync_total - borderstop_v); + * + * Then, when it's time to convert back to hardware settings, the only + * constants are the borderstart_* offsets, all other values are derived from + * the fb video mode: + * + * // PAL + * borderstart_h = 116; + * borderstart_v = 44; + * ... + * borderstop_h = borderstart_h + hsync_total - hsync_len; + * ... + * diwstart_v = borderstart_v - upper_margin; + * + * However, in the current implementation, the borderstart values haven't had + * the benefit of being fully researched, so some modes may be broken. + */ + +#undef DEBUG + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/string.h> +#include <linux/mm.h> +#include <linux/tty.h> +#include <linux/slab.h> +#include <linux/delay.h> +#include <linux/config.h> +#include <linux/interrupt.h> +#include <linux/fb.h> +#include <linux/init.h> +#include <linux/pci.h> + +#ifdef CONFIG_SH_DREAMCAST +#include <asm/machvec.h> +#include <asm/mach/sysasic.h> +#endif + +#ifdef CONFIG_SH_DMA +#include <linux/pagemap.h> +#include <asm/mach/dma.h> +#include <asm/dma.h> +#endif + +#ifdef CONFIG_SH_STORE_QUEUES +#include <asm/uaccess.h> +#include <asm/cpu/sq.h> +#endif + +#ifndef PCI_DEVICE_ID_NEC_NEON250 +# define PCI_DEVICE_ID_NEC_NEON250 0x0067 +#endif + +/* 2D video registers */ +#define DISP_BASE par->mmio_base +#define DISP_BRDRCOLR (DISP_BASE + 0x40) +#define DISP_DIWMODE (DISP_BASE + 0x44) +#define DISP_DIWADDRL (DISP_BASE + 0x50) +#define DISP_DIWADDRS (DISP_BASE + 0x54) +#define DISP_DIWSIZE (DISP_BASE + 0x5c) +#define DISP_SYNCCONF (DISP_BASE + 0xd0) +#define DISP_BRDRHORZ (DISP_BASE + 0xd4) +#define DISP_SYNCSIZE (DISP_BASE + 0xd8) +#define DISP_BRDRVERT (DISP_BASE + 0xdc) +#define DISP_DIWCONF (DISP_BASE + 0xe8) +#define DISP_DIWHSTRT (DISP_BASE + 0xec) +#define DISP_DIWVSTRT (DISP_BASE + 0xf0) + +/* Pixel clocks, one for TV output, doubled for VGA output */ +#define TV_CLK 74239 +#define VGA_CLK 37119 + +/* This is for 60Hz - the VTOTAL is doubled for interlaced modes */ +#define PAL_HTOTAL 863 +#define PAL_VTOTAL 312 +#define NTSC_HTOTAL 857 +#define NTSC_VTOTAL 262 + +/* Supported cable types */ +enum { CT_VGA, CT_NONE, CT_RGB, CT_COMPOSITE }; + +/* Supported video output types */ +enum { VO_PAL, VO_NTSC, VO_VGA }; + +/* Supported palette types */ +enum { PAL_ARGB1555, PAL_RGB565, PAL_ARGB4444, PAL_ARGB8888 }; + +struct pvr2_params { unsigned int val; char *name; }; +static struct pvr2_params cables[] __initdata = { + { CT_VGA, "VGA" }, { CT_RGB, "RGB" }, { CT_COMPOSITE, "COMPOSITE" }, +}; + +static struct pvr2_params outputs[] __initdata = { + { VO_PAL, "PAL" }, { VO_NTSC, "NTSC" }, { VO_VGA, "VGA" }, +}; + +/* + * This describes the current video mode + */ + +static struct pvr2fb_par { + unsigned int hsync_total; /* Clocks/line */ + unsigned int vsync_total; /* Lines/field */ + unsigned int borderstart_h; + unsigned int borderstop_h; + unsigned int borderstart_v; + unsigned int borderstop_v; + unsigned int diwstart_h; /* Horizontal offset of the display field */ + unsigned int diwstart_v; /* Vertical offset of the display field, for + interlaced modes, this is the long field */ + unsigned long disp_start; /* Address of image within VRAM */ + unsigned char is_interlaced; /* Is the display interlaced? */ + unsigned char is_doublescan; /* Are scanlines output twice? (doublescan) */ + unsigned char is_lowres; /* Is horizontal pixel-doubling enabled? */ + + unsigned long mmio_base; /* MMIO base */ +} *currentpar; + +static struct fb_info *fb_info; + +static struct fb_fix_screeninfo pvr2_fix __initdata = { + .id = "NEC PowerVR2", + .type = FB_TYPE_PACKED_PIXELS, + .visual = FB_VISUAL_TRUECOLOR, + .ypanstep = 1, + .ywrapstep = 1, + .accel = FB_ACCEL_NONE, +}; + +static struct fb_var_screeninfo pvr2_var __initdata = { + .xres = 640, + .yres = 480, + .xres_virtual = 640, + .yres_virtual = 480, + .bits_per_pixel =16, + .red = { 11, 5, 0 }, + .green = { 5, 6, 0 }, + .blue = { 0, 5, 0 }, + .activate = FB_ACTIVATE_NOW, + .height = -1, + .width = -1, + .vmode = FB_VMODE_NONINTERLACED, +}; + +static int cable_type = CT_VGA; +static int video_output = VO_VGA; + +static int nopan = 0; +static int nowrap = 1; + +/* + * We do all updating, blanking, etc. during the vertical retrace period + */ +static unsigned int do_vmode_full = 0; /* Change the video mode */ +static unsigned int do_vmode_pan = 0; /* Update the video mode */ +static short do_blank = 0; /* (Un)Blank the screen */ + +static unsigned int is_blanked = 0; /* Is the screen blanked? */ + +#ifdef CONFIG_SH_STORE_QUEUES +static struct sq_mapping *pvr2fb_map; +#endif + +#ifdef CONFIG_SH_DMA +static unsigned int shdma = PVR2_CASCADE_CHAN; +static unsigned int pvr2dma = ONCHIP_NR_DMA_CHANNELS; +#endif + +/* Interface used by the world */ + +int pvr2fb_setup(char*); + +static int pvr2fb_setcolreg(unsigned int regno, unsigned int red, unsigned int green, unsigned int blue, + unsigned int transp, struct fb_info *info); +static int pvr2fb_blank(int blank, struct fb_info *info); +static unsigned long get_line_length(int xres_virtual, int bpp); +static void set_color_bitfields(struct fb_var_screeninfo *var); +static int pvr2fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info); +static int pvr2fb_set_par(struct fb_info *info); +static void pvr2_update_display(struct fb_info *info); +static void pvr2_init_display(struct fb_info *info); +static void pvr2_do_blank(void); +static irqreturn_t pvr2fb_interrupt(int irq, void *dev_id, struct pt_regs *fp); +static int pvr2_init_cable(void); +static int pvr2_get_param(const struct pvr2_params *p, const char *s, + int val, int size); +static ssize_t pvr2fb_write(struct file *file, const char *buf, + size_t count, loff_t *ppos); + +static struct fb_ops pvr2fb_ops = { + .owner = THIS_MODULE, + .fb_setcolreg = pvr2fb_setcolreg, + .fb_blank = pvr2fb_blank, + .fb_check_var = pvr2fb_check_var, + .fb_set_par = pvr2fb_set_par, +#ifdef CONFIG_SH_DMA + .fb_write = pvr2fb_write, +#endif + .fb_fillrect = cfb_fillrect, + .fb_copyarea = cfb_copyarea, + .fb_imageblit = cfb_imageblit, + .fb_cursor = soft_cursor, +}; + +static struct fb_videomode pvr2_modedb[] __initdata = { + /* + * Broadcast video modes (PAL and NTSC). I'm unfamiliar with + * PAL-M and PAL-N, but from what I've read both modes parallel PAL and + * NTSC, so it shouldn't be a problem (I hope). + */ + + { + /* 640x480 @ 60Hz interlaced (NTSC) */ + "ntsc_640x480i", 60, 640, 480, TV_CLK, 38, 33, 0, 18, 146, 26, + FB_SYNC_BROADCAST, FB_VMODE_INTERLACED | FB_VMODE_YWRAP + }, { + /* 640x240 @ 60Hz (NTSC) */ + /* XXX: Broken! Don't use... */ + "ntsc_640x240", 60, 640, 240, TV_CLK, 38, 33, 0, 0, 146, 22, + FB_SYNC_BROADCAST, FB_VMODE_YWRAP + }, { + /* 640x480 @ 60hz (VGA) */ + "vga_640x480", 60, 640, 480, VGA_CLK, 38, 33, 0, 18, 146, 26, + 0, FB_VMODE_YWRAP + }, +}; + +#define NUM_TOTAL_MODES ARRAY_SIZE(pvr2_modedb) + +#define DEFMODE_NTSC 0 +#define DEFMODE_PAL 0 +#define DEFMODE_VGA 2 + +static int defmode = DEFMODE_NTSC; +static char *mode_option __initdata = NULL; + +static inline void pvr2fb_set_pal_type(unsigned int type) +{ + struct pvr2fb_par *par = (struct pvr2fb_par *)fb_info->par; + + fb_writel(type, par->mmio_base + 0x108); +} + +static inline void pvr2fb_set_pal_entry(struct pvr2fb_par *par, + unsigned int regno, + unsigned int val) +{ + fb_writel(val, par->mmio_base + 0x1000 + (4 * regno)); +} + +static int pvr2fb_blank(int blank, struct fb_info *info) +{ + do_blank = blank ? blank : -1; + return 0; +} + +static inline unsigned long get_line_length(int xres_virtual, int bpp) +{ + return (unsigned long)((((xres_virtual*bpp)+31)&~31) >> 3); +} + +static void set_color_bitfields(struct fb_var_screeninfo *var) +{ + switch (var->bits_per_pixel) { + case 16: /* RGB 565 */ + pvr2fb_set_pal_type(PAL_RGB565); + var->red.offset = 11; var->red.length = 5; + var->green.offset = 5; var->green.length = 6; + var->blue.offset = 0; var->blue.length = 5; + var->transp.offset = 0; var->transp.length = 0; + break; + case 24: /* RGB 888 */ + var->red.offset = 16; var->red.length = 8; + var->green.offset = 8; var->green.length = 8; + var->blue.offset = 0; var->blue.length = 8; + var->transp.offset = 0; var->transp.length = 0; + break; + case 32: /* ARGB 8888 */ + pvr2fb_set_pal_type(PAL_ARGB8888); + var->red.offset = 16; var->red.length = 8; + var->green.offset = 8; var->green.length = 8; + var->blue.offset = 0; var->blue.length = 8; + var->transp.offset = 24; var->transp.length = 8; + break; + } +} + +static int pvr2fb_setcolreg(unsigned int regno, unsigned int red, + unsigned int green, unsigned int blue, + unsigned int transp, struct fb_info *info) +{ + struct pvr2fb_par *par = (struct pvr2fb_par *)info->par; + unsigned int tmp; + + if (regno > info->cmap.len) + return 1; + + /* + * We only support the hardware palette for 16 and 32bpp. It's also + * expected that the palette format has been set by the time we get + * here, so we don't waste time setting it again. + */ + switch (info->var.bits_per_pixel) { + case 16: /* RGB 565 */ + tmp = (red & 0xf800) | + ((green & 0xfc00) >> 5) | + ((blue & 0xf800) >> 11); + + pvr2fb_set_pal_entry(par, regno, tmp); + ((u16*)(info->pseudo_palette))[regno] = tmp; + break; + case 24: /* RGB 888 */ + red >>= 8; green >>= 8; blue >>= 8; + ((u32*)(info->pseudo_palette))[regno] = (red << 16) | (green << 8) | blue; + break; + case 32: /* ARGB 8888 */ + red >>= 8; green >>= 8; blue >>= 8; + tmp = (transp << 24) | (red << 16) | (green << 8) | blue; + + pvr2fb_set_pal_entry(par, regno, tmp); + ((u32*)(info->pseudo_palette))[regno] = tmp; + break; + default: + pr_debug("Invalid bit depth %d?!?\n", info->var.bits_per_pixel); + return 1; + } + + return 0; +} + +static int pvr2fb_set_par(struct fb_info *info) +{ + struct pvr2fb_par *par = (struct pvr2fb_par *)info->par; + struct fb_var_screeninfo *var = &info->var; + unsigned long line_length; + unsigned int vtotal; + + /* + * XXX: It's possible that a user could use a VGA box, change the cable + * type in hardware (i.e. switch from VGA<->composite), then change + * modes (i.e. switching to another VT). If that happens we should + * automagically change the output format to cope, but currently I + * don't have a VGA box to make sure this works properly. + */ + cable_type = pvr2_init_cable(); + if (cable_type == CT_VGA && video_output != VO_VGA) + video_output = VO_VGA; + + var->vmode &= FB_VMODE_MASK; + if (var->vmode & FB_VMODE_INTERLACED && video_output != VO_VGA) + par->is_interlaced = 1; + /* + * XXX: Need to be more creative with this (i.e. allow doublecan for + * PAL/NTSC output). + */ + if (var->vmode & FB_VMODE_DOUBLE && video_output == VO_VGA) + par->is_doublescan = 1; + + par->hsync_total = var->left_margin + var->xres + var->right_margin + + var->hsync_len; + par->vsync_total = var->upper_margin + var->yres + var->lower_margin + + var->vsync_len; + + if (var->sync & FB_SYNC_BROADCAST) { + vtotal = par->vsync_total; + if (par->is_interlaced) + vtotal /= 2; + if (vtotal > (PAL_VTOTAL + NTSC_VTOTAL)/2) { + /* XXX: Check for start values here... */ + /* XXX: Check hardware for PAL-compatibility */ + par->borderstart_h = 116; + par->borderstart_v = 44; + } else { + /* NTSC video output */ + par->borderstart_h = 126; + par->borderstart_v = 18; + } + } else { + /* VGA mode */ + /* XXX: What else needs to be checked? */ + /* + * XXX: We have a little freedom in VGA modes, what ranges + * should be here (i.e. hsync/vsync totals, etc.)? + */ + par->borderstart_h = 126; + par->borderstart_v = 40; + } + + /* Calculate the remainding offsets */ + par->diwstart_h = par->borderstart_h + var->left_margin; + par->diwstart_v = par->borderstart_v + var->upper_margin; + par->borderstop_h = par->diwstart_h + var->xres + + var->right_margin; + par->borderstop_v = par->diwstart_v + var->yres + + var->lower_margin; + + if (!par->is_interlaced) + par->borderstop_v /= 2; + if (info->var.xres < 640) + par->is_lowres = 1; + + line_length = get_line_length(var->xres_virtual, var->bits_per_pixel); + par->disp_start = info->fix.smem_start + (line_length * var->yoffset) * line_length; + info->fix.line_length = line_length; + return 0; +} + +static int pvr2fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) +{ + struct pvr2fb_par *par = (struct pvr2fb_par *)info->par; + unsigned int vtotal, hsync_total; + unsigned long line_length; + + if (var->pixclock != TV_CLK && var->pixclock != VGA_CLK) { + pr_debug("Invalid pixclock value %d\n", var->pixclock); + return -EINVAL; + } + + if (var->xres < 320) + var->xres = 320; + if (var->yres < 240) + var->yres = 240; + if (var->xres_virtual < var->xres) + var->xres_virtual = var->xres; + if (var->yres_virtual < var->yres) + var->yres_virtual = var->yres; + + if (var->bits_per_pixel <= 16) + var->bits_per_pixel = 16; + else if (var->bits_per_pixel <= 24) + var->bits_per_pixel = 24; + else if (var->bits_per_pixel <= 32) + var->bits_per_pixel = 32; + + set_color_bitfields(var); + + if (var->vmode & FB_VMODE_YWRAP) { + if (var->xoffset || var->yoffset < 0 || + var->yoffset >= var->yres_virtual) { + var->xoffset = var->yoffset = 0; + } else { + if (var->xoffset > var->xres_virtual - var->xres || + var->yoffset > var->yres_virtual - var->yres || + var->xoffset < 0 || var->yoffset < 0) + var->xoffset = var->yoffset = 0; + } + } else { + var->xoffset = var->yoffset = 0; + } + + /* + * XXX: Need to be more creative with this (i.e. allow doublecan for + * PAL/NTSC output). + */ + if (var->yres < 480 && video_output == VO_VGA) + var->vmode |= FB_VMODE_DOUBLE; + + if (video_output != VO_VGA) { + var->sync |= FB_SYNC_BROADCAST; + var->vmode |= FB_VMODE_INTERLACED; + } else { + var->sync &= ~FB_SYNC_BROADCAST; + var->vmode &= ~FB_VMODE_INTERLACED; + var->vmode |= pvr2_var.vmode; + } + + if ((var->activate & FB_ACTIVATE_MASK) != FB_ACTIVATE_TEST) { + var->right_margin = par->borderstop_h - + (par->diwstart_h + var->xres); + var->left_margin = par->diwstart_h - par->borderstart_h; + var->hsync_len = par->borderstart_h + + (par->hsync_total - par->borderstop_h); + + var->upper_margin = par->diwstart_v - par->borderstart_v; + var->lower_margin = par->borderstop_v - + (par->diwstart_v + var->yres); + var->vsync_len = par->borderstop_v + + (par->vsync_total - par->borderstop_v); + } + + hsync_total = var->left_margin + var->xres + var->right_margin + + var->hsync_len; + vtotal = var->upper_margin + var->yres + var->lower_margin + + var->vsync_len; + + if (var->sync & FB_SYNC_BROADCAST) { + if (var->vmode & FB_VMODE_INTERLACED) + vtotal /= 2; + if (vtotal > (PAL_VTOTAL + NTSC_VTOTAL)/2) { + /* PAL video output */ + /* XXX: Should be using a range here ... ? */ + if (hsync_total != PAL_HTOTAL) { + pr_debug("invalid hsync total for PAL\n"); + return -EINVAL; + } + } else { + /* NTSC video output */ + if (hsync_total != NTSC_HTOTAL) { + pr_debug("invalid hsync total for NTSC\n"); + return -EINVAL; + } + } + } + + /* Check memory sizes */ + line_length = get_line_length(var->xres_virtual, var->bits_per_pixel); + if (line_length * var->yres_virtual > info->fix.smem_len) + return -ENOMEM; + + return 0; +} + +static void pvr2_update_display(struct fb_info *info) +{ + struct pvr2fb_par *par = (struct pvr2fb_par *) info->par; + struct fb_var_screeninfo *var = &info->var; + + /* Update the start address of the display image */ + fb_writel(par->disp_start, DISP_DIWADDRL); + fb_writel(par->disp_start + + get_line_length(var->xoffset+var->xres, var->bits_per_pixel), + DISP_DIWADDRS); +} + +/* + * Initialize the video mode. Currently, the 16bpp and 24bpp modes aren't + * very stable. It's probably due to the fact that a lot of the 2D video + * registers are still undocumented. + */ + +static void pvr2_init_display(struct fb_info *info) +{ + struct pvr2fb_par *par = (struct pvr2fb_par *) info->par; + struct fb_var_screeninfo *var = &info->var; + unsigned int diw_height, diw_width, diw_modulo = 1; + unsigned int bytesperpixel = var->bits_per_pixel >> 3; + + /* hsync and vsync totals */ + fb_writel((par->vsync_total << 16) | par->hsync_total, DISP_SYNCSIZE); + + /* column height, modulo, row width */ + /* since we're "panning" within vram, we need to offset things based + * on the offset from the virtual x start to our real gfx. */ + if (video_output != VO_VGA && par->is_interlaced) + diw_modulo += info->fix.line_length / 4; + diw_height = (par->is_interlaced ? var->yres / 2 : var->yres); + diw_width = get_line_length(var->xres, var->bits_per_pixel) / 4; + fb_writel((diw_modulo << 20) | (--diw_height << 10) | --diw_width, + DISP_DIWSIZE); + + /* display address, long and short fields */ + fb_writel(par->disp_start, DISP_DIWADDRL); + fb_writel(par->disp_start + + get_line_length(var->xoffset+var->xres, var->bits_per_pixel), + DISP_DIWADDRS); + + /* border horizontal, border vertical, border color */ + fb_writel((par->borderstart_h << 16) | par->borderstop_h, DISP_BRDRHORZ); + fb_writel((par->borderstart_v << 16) | par->borderstop_v, DISP_BRDRVERT); + fb_writel(0, DISP_BRDRCOLR); + + /* display window start position */ + fb_writel(par->diwstart_h, DISP_DIWHSTRT); + fb_writel((par->diwstart_v << 16) | par->diwstart_v, DISP_DIWVSTRT); + + /* misc. settings */ + fb_writel((0x16 << 16) | par->is_lowres, DISP_DIWCONF); + + /* clock doubler (for VGA), scan doubler, display enable */ + fb_writel(((video_output == VO_VGA) << 23) | + (par->is_doublescan << 1) | 1, DISP_DIWMODE); + + /* bits per pixel */ + fb_writel(fb_readl(DISP_DIWMODE) | (--bytesperpixel << 2), DISP_DIWMODE); + + /* video enable, color sync, interlace, + * hsync and vsync polarity (currently unused) */ + fb_writel(0x100 | ((par->is_interlaced /*|4*/) << 4), DISP_SYNCCONF); +} + +/* Simulate blanking by making the border cover the entire screen */ + +#define BLANK_BIT (1<<3) + +static void pvr2_do_blank(void) +{ + struct pvr2fb_par *par = currentpar; + unsigned long diwconf; + + diwconf = fb_readl(DISP_DIWCONF); + if (do_blank > 0) + fb_writel(diwconf | BLANK_BIT, DISP_DIWCONF); + else + fb_writel(diwconf & ~BLANK_BIT, DISP_DIWCONF); + + is_blanked = do_blank > 0 ? do_blank : 0; +} + +static irqreturn_t pvr2fb_interrupt(int irq, void *dev_id, struct pt_regs *fp) +{ + struct fb_info *info = dev_id; + + if (do_vmode_pan || do_vmode_full) + pvr2_update_display(info); + if (do_vmode_full) + pvr2_init_display(info); + if (do_vmode_pan) + do_vmode_pan = 0; + if (do_vmode_full) + do_vmode_full = 0; + if (do_blank) { + pvr2_do_blank(); + do_blank = 0; + } + return IRQ_HANDLED; +} + +/* + * Determine the cable type and initialize the cable output format. Don't do + * anything if the cable type has been overidden (via "cable:XX"). + */ + +#define PCTRA 0xff80002c +#define PDTRA 0xff800030 +#define VOUTC 0xa0702c00 + +static int pvr2_init_cable(void) +{ + if (cable_type < 0) { + fb_writel((fb_readl(PCTRA) & 0xfff0ffff) | 0x000a0000, + PCTRA); + cable_type = (fb_readw(PDTRA) >> 8) & 3; + } + + /* Now select the output format (either composite or other) */ + /* XXX: Save the previous val first, as this reg is also AICA + related */ + if (cable_type == CT_COMPOSITE) + fb_writel(3 << 8, VOUTC); + else + fb_writel(0, VOUTC); + + return cable_type; +} + +#ifdef CONFIG_SH_DMA +static ssize_t pvr2fb_write(struct file *file, const char *buf, + size_t count, loff_t *ppos) +{ + unsigned long dst, start, end, len; + unsigned int nr_pages; + struct page **pages; + int ret, i; + + nr_pages = (count + PAGE_SIZE - 1) >> PAGE_SHIFT; + + pages = kmalloc(nr_pages * sizeof(struct page *), GFP_KERNEL); + if (!pages) + return -ENOMEM; + + down_read(¤t->mm->mmap_sem); + ret = get_user_pages(current, current->mm, (unsigned long)buf, + nr_pages, WRITE, 0, pages, NULL); + up_read(¤t->mm->mmap_sem); + + if (ret < nr_pages) { + nr_pages = ret; + ret = -EINVAL; + goto out_unmap; + } + + dma_configure_channel(shdma, 0x12c1); + + dst = (unsigned long)fb_info->screen_base + *ppos; + start = (unsigned long)page_address(pages[0]); + end = (unsigned long)page_address(pages[nr_pages]); + len = nr_pages << PAGE_SHIFT; + + /* Half-assed contig check */ + if (start + len == end) { + /* As we do this in one shot, it's either all or nothing.. */ + if ((*ppos + len) > fb_info->fix.smem_len) { + ret = -ENOSPC; + goto out_unmap; + } + + dma_write(shdma, start, 0, len); + dma_write(pvr2dma, 0, dst, len); + dma_wait_for_completion(pvr2dma); + + goto out; + } + + /* Not contiguous, writeout per-page instead.. */ + for (i = 0; i < nr_pages; i++, dst += PAGE_SIZE) { + if ((*ppos + (i << PAGE_SHIFT)) > fb_info->fix.smem_len) { + ret = -ENOSPC; + goto out_unmap; + } + + dma_write_page(shdma, (unsigned long)page_address(pages[i]), 0); + dma_write_page(pvr2dma, 0, dst); + dma_wait_for_completion(pvr2dma); + } + +out: + *ppos += count; + ret = count; + +out_unmap: + for (i = 0; i < nr_pages; i++) + page_cache_release(pages[i]); + + kfree(pages); + + return ret; +} +#endif /* CONFIG_SH_DMA */ + +/** + * pvr2fb_common_init + * + * Common init code for the PVR2 chips. + * + * This mostly takes care of the common aspects of the fb setup and + * registration. It's expected that the board-specific init code has + * already setup pvr2_fix with something meaningful at this point. + * + * Device info reporting is also done here, as well as picking a sane + * default from the modedb. For board-specific modelines, simply define + * a per-board modedb. + * + * Also worth noting is that the cable and video output types are likely + * always going to be VGA for the PCI-based PVR2 boards, but we leave this + * in for flexibility anyways. Who knows, maybe someone has tv-out on a + * PCI-based version of these things ;-) + */ +static int __init pvr2fb_common_init(void) +{ + struct pvr2fb_par *par = currentpar; + unsigned long modememused, rev; + + fb_info->screen_base = ioremap_nocache(pvr2_fix.smem_start, + pvr2_fix.smem_len); + + if (!fb_info->screen_base) { + printk(KERN_ERR "pvr2fb: Failed to remap smem space\n"); + goto out_err; + } + + par->mmio_base = (unsigned long)ioremap_nocache(pvr2_fix.mmio_start, + pvr2_fix.mmio_len); + if (!par->mmio_base) { + printk(KERN_ERR "pvr2fb: Failed to remap mmio space\n"); + goto out_err; + } + + fb_memset((unsigned long)fb_info->screen_base, 0, pvr2_fix.smem_len); + + pvr2_fix.ypanstep = nopan ? 0 : 1; + pvr2_fix.ywrapstep = nowrap ? 0 : 1; + + fb_info->fbops = &pvr2fb_ops; + fb_info->fix = pvr2_fix; + fb_info->par = currentpar; + fb_info->pseudo_palette = (void *)(fb_info->par + 1); + fb_info->flags = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN; + + if (video_output == VO_VGA) + defmode = DEFMODE_VGA; + + if (!mode_option) + mode_option = "640x480@60"; + + if (!fb_find_mode(&fb_info->var, fb_info, mode_option, pvr2_modedb, + NUM_TOTAL_MODES, &pvr2_modedb[defmode], 16)) + fb_info->var = pvr2_var; + + fb_alloc_cmap(&fb_info->cmap, 256, 0); + + if (register_framebuffer(fb_info) < 0) + goto out_err; + + modememused = get_line_length(fb_info->var.xres_virtual, + fb_info->var.bits_per_pixel); + modememused *= fb_info->var.yres_virtual; + + rev = fb_readl(par->mmio_base + 0x04); + + printk("fb%d: %s (rev %ld.%ld) frame buffer device, using %ldk/%ldk of video memory\n", + fb_info->node, fb_info->fix.id, (rev >> 4) & 0x0f, rev & 0x0f, + modememused >> 10, (unsigned long)(fb_info->fix.smem_len >> 10)); + printk("fb%d: Mode %dx%d-%d pitch = %ld cable: %s video output: %s\n", + fb_info->node, fb_info->var.xres, fb_info->var.yres, + fb_info->var.bits_per_pixel, + get_line_length(fb_info->var.xres, fb_info->var.bits_per_pixel), + (char *)pvr2_get_param(cables, NULL, cable_type, 3), + (char *)pvr2_get_param(outputs, NULL, video_output, 3)); + +#ifdef CONFIG_SH_STORE_QUEUES + printk(KERN_NOTICE "fb%d: registering with SQ API\n", fb_info->node); + + pvr2fb_map = sq_remap(fb_info->fix.smem_start, fb_info->fix.smem_len, + fb_info->fix.id); + + printk(KERN_NOTICE "fb%d: Mapped video memory to SQ addr 0x%lx\n", + fb_info->node, pvr2fb_map->sq_addr); +#endif + + return 0; + +out_err: + if (fb_info->screen_base) + iounmap(fb_info->screen_base); + if (par->mmio_base) + iounmap((void *)par->mmio_base); + + return -ENXIO; +} + +#ifdef CONFIG_SH_DREAMCAST +static int __init pvr2fb_dc_init(void) +{ + if (!mach_is_dreamcast()) + return -ENXIO; + + /* Make a guess at the monitor based on the attached cable */ + if (pvr2_init_cable() == CT_VGA) { + fb_info->monspecs.hfmin = 30000; + fb_info->monspecs.hfmax = 70000; + fb_info->monspecs.vfmin = 60; + fb_info->monspecs.vfmax = 60; + } else { + /* Not VGA, using a TV (taken from acornfb) */ + fb_info->monspecs.hfmin = 15469; + fb_info->monspecs.hfmax = 15781; + fb_info->monspecs.vfmin = 49; + fb_info->monspecs.vfmax = 51; + } + + /* + * XXX: This needs to pull default video output via BIOS or other means + */ + if (video_output < 0) { + if (cable_type == CT_VGA) { + video_output = VO_VGA; + } else { + video_output = VO_NTSC; + } + } + + /* + * Nothing exciting about the DC PVR2 .. only a measly 8MiB. + */ + pvr2_fix.smem_start = 0xa5000000; /* RAM starts here */ + pvr2_fix.smem_len = 8 << 20; + + pvr2_fix.mmio_start = 0xa05f8000; /* registers start here */ + pvr2_fix.mmio_len = 0x2000; + + if (request_irq(HW_EVENT_VSYNC, pvr2fb_interrupt, 0, + "pvr2 VBL handler", fb_info)) { + return -EBUSY; + } + +#ifdef CONFIG_SH_DMA + if (request_dma(pvr2dma, "pvr2") != 0) { + free_irq(HW_EVENT_VSYNC, 0); + return -EBUSY; + } +#endif + + return pvr2fb_common_init(); +} + +static void pvr2fb_dc_exit(void) +{ + free_irq(HW_EVENT_VSYNC, 0); +#ifdef CONFIG_SH_DMA + free_dma(pvr2dma); +#endif +} +#endif /* CONFIG_SH_DREAMCAST */ + +#ifdef CONFIG_PCI +static int __devinit pvr2fb_pci_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + int ret; + + ret = pci_enable_device(pdev); + if (ret) { + printk(KERN_ERR "pvr2fb: PCI enable failed\n"); + return ret; + } + + ret = pci_request_regions(pdev, "pvr2fb"); + if (ret) { + printk(KERN_ERR "pvr2fb: PCI request regions failed\n"); + return ret; + } + + /* + * Slightly more exciting than the DC PVR2 .. 16MiB! + */ + pvr2_fix.smem_start = pci_resource_start(pdev, 0); + pvr2_fix.smem_len = pci_resource_len(pdev, 0); + + pvr2_fix.mmio_start = pci_resource_start(pdev, 1); + pvr2_fix.mmio_len = pci_resource_len(pdev, 1); + + fb_info->device = &pdev->dev; + + return pvr2fb_common_init(); +} + +static void __devexit pvr2fb_pci_remove(struct pci_dev *pdev) +{ + pci_release_regions(pdev); +} + +static struct pci_device_id pvr2fb_pci_tbl[] __devinitdata = { + { PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_NEON250, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + { 0, }, +}; + +MODULE_DEVICE_TABLE(pci, pvr2fb_pci_tbl); + +static struct pci_driver pvr2fb_pci_driver = { + .name = "pvr2fb", + .id_table = pvr2fb_pci_tbl, + .probe = pvr2fb_pci_probe, + .remove = __devexit_p(pvr2fb_pci_remove), +}; + +static int __init pvr2fb_pci_init(void) +{ + return pci_register_driver(&pvr2fb_pci_driver); +} + +static void pvr2fb_pci_exit(void) +{ + pci_unregister_driver(&pvr2fb_pci_driver); +} +#endif /* CONFIG_PCI */ + +static int __init pvr2_get_param(const struct pvr2_params *p, const char *s, + int val, int size) +{ + int i; + + for (i = 0 ; i < size ; i++ ) { + if (s != NULL) { + if (!strnicmp(p[i].name, s, strlen(s))) + return p[i].val; + } else { + if (p[i].val == val) + return (int)p[i].name; + } + } + return -1; +} + +/* + * Parse command arguments. Supported arguments are: + * inverse Use inverse color maps + * cable:composite|rgb|vga Override the video cable type + * output:NTSC|PAL|VGA Override the video output format + * + * <xres>x<yres>[-<bpp>][@<refresh>] or, + * <name>[-<bpp>][@<refresh>] Startup using this video mode + */ + +#ifndef MODULE +int __init pvr2fb_setup(char *options) +{ + char *this_opt; + char cable_arg[80]; + char output_arg[80]; + + if (!options || !*options) + return 0; + + while ((this_opt = strsep(&options, ","))) { + if (!*this_opt) + continue; + if (!strcmp(this_opt, "inverse")) { + fb_invert_cmaps(); + } else if (!strncmp(this_opt, "cable:", 6)) { + strcpy(cable_arg, this_opt + 6); + } else if (!strncmp(this_opt, "output:", 7)) { + strcpy(output_arg, this_opt + 7); + } else if (!strncmp(this_opt, "nopan", 5)) { + nopan = 1; + } else if (!strncmp(this_opt, "nowrap", 6)) { + nowrap = 1; + } else { + mode_option = this_opt; + } + } + + if (*cable_arg) + cable_type = pvr2_get_param(cables, cable_arg, 0, 3); + if (*output_arg) + video_output = pvr2_get_param(outputs, output_arg, 0, 3); + + return 0; +} +#endif + +static struct pvr2_board { + int (*init)(void); + void (*exit)(void); + char name[16]; +} board_list[] = { +#ifdef CONFIG_SH_DREAMCAST + { pvr2fb_dc_init, pvr2fb_dc_exit, "Sega DC PVR2" }, +#endif +#ifdef CONFIG_PCI + { pvr2fb_pci_init, pvr2fb_pci_exit, "PCI PVR2" }, +#endif + { 0, }, +}; + +int __init pvr2fb_init(void) +{ + int i, ret = -ENODEV; + int size; + +#ifndef MODULE + char *option = NULL; + + if (fb_get_options("pvr2fb", &option)) + return -ENODEV; + pvr2fb_setup(option); +#endif + size = sizeof(struct fb_info) + sizeof(struct pvr2fb_par) + 16 * sizeof(u32); + + fb_info = kmalloc(size, GFP_KERNEL); + if (!fb_info) { + printk(KERN_ERR "Failed to allocate memory for fb_info\n"); + return -ENOMEM; + } + + memset(fb_info, 0, size); + + currentpar = (struct pvr2fb_par *)(fb_info + 1); + + for (i = 0; i < ARRAY_SIZE(board_list); i++) { + struct pvr2_board *pvr_board = board_list + i; + + if (!pvr_board->init) + continue; + + ret = pvr_board->init(); + + if (ret != 0) { + printk(KERN_ERR "pvr2fb: Failed init of %s device\n", + pvr_board->name); + kfree(fb_info); + break; + } + } + + return ret; +} + +static void __exit pvr2fb_exit(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(board_list); i++) { + struct pvr2_board *pvr_board = board_list + i; + + if (pvr_board->exit) + pvr_board->exit(); + } + +#ifdef CONFIG_SH_STORE_QUEUES + sq_unmap(pvr2fb_map); +#endif + + unregister_framebuffer(fb_info); + kfree(fb_info); +} + +module_init(pvr2fb_init); +module_exit(pvr2fb_exit); + +MODULE_AUTHOR("Paul Mundt <lethal@linux-sh.org>, M. R. Brown <mrbrown@0xd6.org>"); +MODULE_DESCRIPTION("Framebuffer driver for NEC PowerVR 2 based graphics boards"); +MODULE_LICENSE("GPL"); + |