Merge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: (86 commits)
  SPIN_LOCK_UNLOCKED cleanup in drivers/ata/pata_winbond.c
  drivers/ata/pata_cmd640.c: fix build with CONFIG_PM=n
  pata_hpt37x: Further small fixes
  pata_hpt3x2n: Add HPT371N support and other bits
  ata: printk warning fixes
  libata: separate ATA_EHI_DID_RESET into DID_SOFTRESET and DID_HARDRESET
  ahci: consolidate common port flags
  ata_timing: ensure t->cycle is always correct
  libata: add missing call to ->cable_detect() in new EH path
  pata_amd: remove contamination added during cable_detect conversion
  libata: Handle drives that require a spin-up command before first access
  libata: HPA support
  libata: kill probe_ent and related helpers
  libata: convert the remaining PATA drivers to new init model
  libata: convert the remaining SATA drivers to new init model
  libata: convert ata_pci_init_native_mode() users to new init model
  libata: convert drivers with combined SATA/PATA ports to new init model
  libata: add init helpers including ata_pci_prepare_native_host()
  libata: convert native PCI host handling to new init model
  libata: convert legacy PCI host handling to new init model
  ...

70 files changed, 3580 insertions, 3253 deletions

diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 7bdbe5a..365c306 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -156,11 +156,6 @@ config SATA_INIC162X
 	help
 	  This option enables support for Initio 162x Serial ATA.
 
-config SATA_INTEL_COMBINED
-	bool
-	depends on IDE=y && !BLK_DEV_IDE_SATA && (SATA_AHCI || ATA_PIIX)
-	default y
-
 config SATA_ACPI
 	bool
 	depends on ACPI && PCI
@@ -184,7 +179,7 @@ config PATA_ALI
 	  If unsure, say N.
 
 config PATA_AMD
-	tristate "AMD/NVidia PATA support (Experimental)"
+	tristate "AMD/NVidia PATA support"
 	depends on PCI
 	help
 	  This option enables support for the AMD and NVidia PATA
@@ -209,6 +204,16 @@ config PATA_ATIIXP
 
 	  If unsure, say N.
 
+config PATA_CMD640_PCI
+	tristate "CMD640 PCI PATA support (Very Experimental)"
+	depends on PCI && EXPERIMENTAL
+	help
+	  This option enables support for the CMD640 PCI IDE
+	  interface chip. Only the primary channel is currently
+	  supported.
+
+	  If unsure, say N.
+
 config PATA_CMD64X
 	tristate "CMD64x PATA support (Very Experimental)"
 	depends on PCI&& EXPERIMENTAL
@@ -273,7 +278,7 @@ config ATA_GENERIC
 	  If unsure, say N.
 
 config PATA_HPT366
-	tristate "HPT 366/368 PATA support (Very Experimental)"
+	tristate "HPT 366/368 PATA support (Experimental)"
 	depends on PCI && EXPERIMENTAL
 	help
 	  This option enables support for the HPT 366 and 368
@@ -282,7 +287,7 @@ config PATA_HPT366
 	  If unsure, say N.
 
 config PATA_HPT37X
-	tristate "HPT 370/370A/371/372/374/302 PATA support (Very Experimental)"
+	tristate "HPT 370/370A/371/372/374/302 PATA support (Experimental)"
 	depends on PCI && EXPERIMENTAL
 	help
 	  This option enables support for the majority of the later HPT
@@ -309,7 +314,7 @@ config PATA_HPT3X3
 	  If unsure, say N.
 
 config PATA_ISAPNP
-	tristate "ISA Plug and Play PATA support (Very Experimental)"
+	tristate "ISA Plug and Play PATA support (Experimental)"
 	depends on EXPERIMENTAL && ISAPNP
 	help
 	  This option enables support for ISA plug & play ATA
@@ -318,8 +323,8 @@ config PATA_ISAPNP
 	  If unsure, say N.
 
 config PATA_IT821X
-	tristate "IT8211/2 PATA support (Experimental)"
-	depends on PCI && EXPERIMENTAL
+	tristate "IT8211/2 PATA support"
+	depends on PCI
 	help
 	  This option enables support for the ITE 8211 and 8212
 	  PATA controllers via the new ATA layer, including RAID
@@ -390,10 +395,10 @@ config PATA_MPIIX
 	  If unsure, say N.
 
 config PATA_OLDPIIX
-	tristate "Intel PATA old PIIX support (Experimental)"
-	depends on PCI && EXPERIMENTAL
+	tristate "Intel PATA old PIIX support"
+	depends on PCI
 	help
-	  This option enables support for old(?) PIIX PATA support.
+	  This option enables support for early PIIX PATA support.
 
 	  If unsure, say N.
 
@@ -444,7 +449,7 @@ config PATA_PCMCIA
 	  If unsure, say N.
 
 config PATA_PDC_OLD
-	tristate "Older Promise PATA controller support (Very Experimental)"
+	tristate "Older Promise PATA controller support (Experimental)"
 	depends on PCI && EXPERIMENTAL
 	help
 	  This option enables support for the Promise 20246, 20262, 20263,
@@ -459,7 +464,7 @@ config PATA_QDI
 	  Support for QDI 6500 and 6580 PATA controllers on VESA local bus.
 
 config PATA_RADISYS
-	tristate "RADISYS 82600 PATA support (Very experimental)"
+	tristate "RADISYS 82600 PATA support (Very Experimental)"
 	depends on PCI && EXPERIMENTAL
 	help
 	  This option enables support for the RADISYS 82600
@@ -477,7 +482,7 @@ config PATA_RZ1000
 	  If unsure, say N.
 
 config PATA_SC1200
-	tristate "SC1200 PATA support (Raving Lunatic)"
+	tristate "SC1200 PATA support (Very Experimental)"
 	depends on PCI && EXPERIMENTAL
 	help
 	  This option enables support for the NatSemi/AMD SC1200 SoC
@@ -486,8 +491,8 @@ config PATA_SC1200
 	  If unsure, say N.
 
 config PATA_SERVERWORKS
-	tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support (Experimental)"
-	depends on PCI && EXPERIMENTAL
+	tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support"
+	depends on PCI
 	help
 	  This option enables support for the Serverworks OSB4/CSB5/CSB6 and
 	  HT1000 PATA controllers, via the new ATA layer.
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index 13d7397..b7055e3 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -22,6 +22,7 @@ obj-$(CONFIG_PATA_ALI)		+= pata_ali.o
 obj-$(CONFIG_PATA_AMD)		+= pata_amd.o
 obj-$(CONFIG_PATA_ARTOP)	+= pata_artop.o
 obj-$(CONFIG_PATA_ATIIXP)	+= pata_atiixp.o
+obj-$(CONFIG_PATA_CMD640_PCI)	+= pata_cmd640.o
 obj-$(CONFIG_PATA_CMD64X)	+= pata_cmd64x.o
 obj-$(CONFIG_PATA_CS5520)	+= pata_cs5520.o
 obj-$(CONFIG_PATA_CS5530)	+= pata_cs5530.o
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index fd27227..34c5534 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -170,6 +170,10 @@ enum {
 	AHCI_FLAG_IGN_IRQ_IF_ERR	= (1 << 25), /* ignore IRQ_IF_ERR */
 	AHCI_FLAG_HONOR_PI		= (1 << 26), /* honor PORTS_IMPL */
 	AHCI_FLAG_IGN_SERR_INTERNAL	= (1 << 27), /* ignore SERR_INTERNAL */
+
+	AHCI_FLAG_COMMON		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+					  ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
+					  ATA_FLAG_SKIP_D2H_BSY,
 };
 
 struct ahci_cmd_hdr {
@@ -188,8 +192,10 @@ struct ahci_sg {
 };
 
 struct ahci_host_priv {
-	u32			cap;	/* cache of HOST_CAP register */
-	u32			port_map; /* cache of HOST_PORTS_IMPL reg */
+	u32			cap;		/* cap to use */
+	u32			port_map;	/* port map to use */
+	u32			saved_cap;	/* saved initial cap */
+	u32			saved_port_map;	/* saved initial port_map */
 };
 
 struct ahci_port_priv {
@@ -209,7 +215,6 @@ static u32 ahci_scr_read (struct ata_port *ap, unsigned int sc_reg);
 static void ahci_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val);
 static int ahci_init_one (struct pci_dev *pdev, const struct pci_device_id *ent);
 static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc);
-static irqreturn_t ahci_interrupt (int irq, void *dev_instance);
 static void ahci_irq_clear(struct ata_port *ap);
 static int ahci_port_start(struct ata_port *ap);
 static void ahci_port_stop(struct ata_port *ap);
@@ -263,7 +268,6 @@ static const struct ata_port_operations ahci_ops = {
 	.qc_prep		= ahci_qc_prep,
 	.qc_issue		= ahci_qc_issue,
 
-	.irq_handler		= ahci_interrupt,
 	.irq_clear		= ahci_irq_clear,
 	.irq_on			= ata_dummy_irq_on,
 	.irq_ack		= ata_dummy_irq_ack,
@@ -298,7 +302,6 @@ static const struct ata_port_operations ahci_vt8251_ops = {
 	.qc_prep		= ahci_qc_prep,
 	.qc_issue		= ahci_qc_issue,
 
-	.irq_handler		= ahci_interrupt,
 	.irq_clear		= ahci_irq_clear,
 	.irq_on			= ata_dummy_irq_on,
 	.irq_ack		= ata_dummy_irq_ack,
@@ -324,58 +327,41 @@ static const struct ata_port_operations ahci_vt8251_ops = {
 static const struct ata_port_info ahci_port_info[] = {
 	/* board_ahci */
 	{
-		.sht		= &ahci_sht,
-		.flags		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
-				  ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
-				  ATA_FLAG_SKIP_D2H_BSY,
+		.flags		= AHCI_FLAG_COMMON,
 		.pio_mask	= 0x1f, /* pio0-4 */
 		.udma_mask	= 0x7f, /* udma0-6 ; FIXME */
 		.port_ops	= &ahci_ops,
 	},
 	/* board_ahci_pi */
 	{
-		.sht		= &ahci_sht,
-		.flags		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
-				  ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
-				  ATA_FLAG_SKIP_D2H_BSY | AHCI_FLAG_HONOR_PI,
+		.flags		= AHCI_FLAG_COMMON | AHCI_FLAG_HONOR_PI,
 		.pio_mask	= 0x1f, /* pio0-4 */
 		.udma_mask	= 0x7f, /* udma0-6 ; FIXME */
 		.port_ops	= &ahci_ops,
 	},
 	/* board_ahci_vt8251 */
 	{
-		.sht		= &ahci_sht,
-		.flags		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
-				  ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
-				  ATA_FLAG_SKIP_D2H_BSY |
-				  ATA_FLAG_HRST_TO_RESUME | AHCI_FLAG_NO_NCQ,
+		.flags		= AHCI_FLAG_COMMON | ATA_FLAG_HRST_TO_RESUME |
+				  AHCI_FLAG_NO_NCQ,
 		.pio_mask	= 0x1f, /* pio0-4 */
 		.udma_mask	= 0x7f, /* udma0-6 ; FIXME */
 		.port_ops	= &ahci_vt8251_ops,
 	},
 	/* board_ahci_ign_iferr */
 	{
-		.sht		= &ahci_sht,
-		.flags		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
-				  ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
-				  ATA_FLAG_SKIP_D2H_BSY |
-				  AHCI_FLAG_IGN_IRQ_IF_ERR,
+		.flags		= AHCI_FLAG_COMMON | AHCI_FLAG_IGN_IRQ_IF_ERR,
 		.pio_mask	= 0x1f, /* pio0-4 */
 		.udma_mask	= 0x7f, /* udma0-6 ; FIXME */
 		.port_ops	= &ahci_ops,
 	},
 	/* board_ahci_sb600 */
 	{
-		.sht		= &ahci_sht,
-		.flags		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
-				  ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
-				  ATA_FLAG_SKIP_D2H_BSY |
+		.flags		= AHCI_FLAG_COMMON |
 				  AHCI_FLAG_IGN_SERR_INTERNAL,
 		.pio_mask	= 0x1f, /* pio0-4 */
 		.udma_mask	= 0x7f, /* udma0-6 ; FIXME */
 		.port_ops	= &ahci_ops,
 	},
-
 };
 
 static const struct pci_device_id ahci_pci_tbl[] = {
@@ -413,11 +399,11 @@ static const struct pci_device_id ahci_pci_tbl[] = {
 	  PCI_CLASS_STORAGE_SATA_AHCI, 0xffffff, board_ahci_ign_iferr },
 
 	/* ATI */
-	{ PCI_VDEVICE(ATI, 0x4380), board_ahci_sb600 }, /* ATI SB600 non-raid */
-	{ PCI_VDEVICE(ATI, 0x4381), board_ahci }, /* ATI SB600 raid */
+	{ PCI_VDEVICE(ATI, 0x4380), board_ahci_sb600 }, /* ATI SB600 */
 
 	/* VIA */
 	{ PCI_VDEVICE(VIA, 0x3349), board_ahci_vt8251 }, /* VIA VT8251 */
+	{ PCI_VDEVICE(VIA, 0x6287), board_ahci_vt8251 }, /* VIA VT8251 */
 
 	/* NVIDIA */
 	{ PCI_VDEVICE(NVIDIA, 0x044c), board_ahci },		/* MCP65 */
@@ -471,10 +457,100 @@ static inline int ahci_nr_ports(u32 cap)
 	return (cap & 0x1f) + 1;
 }
 
-static inline void __iomem *ahci_port_base(void __iomem *base,
-					   unsigned int port)
+static inline void __iomem *ahci_port_base(struct ata_port *ap)
+{
+	void __iomem *mmio = ap->host->iomap[AHCI_PCI_BAR];
+
+	return mmio + 0x100 + (ap->port_no * 0x80);
+}
+
+/**
+ *	ahci_save_initial_config - Save and fixup initial config values
+ *	@pdev: target PCI device
+ *	@pi: associated ATA port info
+ *	@hpriv: host private area to store config values
+ *
+ *	Some registers containing configuration info might be setup by
+ *	BIOS and might be cleared on reset.  This function saves the
+ *	initial values of those registers into @hpriv such that they
+ *	can be restored after controller reset.
+ *
+ *	If inconsistent, config values are fixed up by this function.
+ *
+ *	LOCKING:
+ *	None.
+ */
+static void ahci_save_initial_config(struct pci_dev *pdev,
+				     const struct ata_port_info *pi,
+				     struct ahci_host_priv *hpriv)
 {
-	return base + 0x100 + (port * 0x80);
+	void __iomem *mmio = pcim_iomap_table(pdev)[AHCI_PCI_BAR];
+	u32 cap, port_map;
+	int i;
+
+	/* Values prefixed with saved_ are written back to host after
+	 * reset.  Values without are used for driver operation.
+	 */
+	hpriv->saved_cap = cap = readl(mmio + HOST_CAP);
+	hpriv->saved_port_map = port_map = readl(mmio + HOST_PORTS_IMPL);
+
+	/* fixup zero port_map */
+	if (!port_map) {
+		port_map = (1 << ahci_nr_ports(hpriv->cap)) - 1;
+		dev_printk(KERN_WARNING, &pdev->dev,
+			   "PORTS_IMPL is zero, forcing 0x%x\n", port_map);
+
+		/* write the fixed up value to the PI register */
+		hpriv->saved_port_map = port_map;
+	}
+
+	/* cross check port_map and cap.n_ports */
+	if (pi->flags & AHCI_FLAG_HONOR_PI) {
+		u32 tmp_port_map = port_map;
+		int n_ports = ahci_nr_ports(cap);
+
+		for (i = 0; i < AHCI_MAX_PORTS && n_ports; i++) {
+			if (tmp_port_map & (1 << i)) {
+				n_ports--;
+				tmp_port_map &= ~(1 << i);
+			}
+		}
+
+		/* Whine if inconsistent.  No need to update cap.
+		 * port_map is used to determine number of ports.
+		 */
+		if (n_ports || tmp_port_map)
+			dev_printk(KERN_WARNING, &pdev->dev,
+				   "nr_ports (%u) and implemented port map "
+				   "(0x%x) don't match\n",
+				   ahci_nr_ports(cap), port_map);
+	} else {
+		/* fabricate port_map from cap.nr_ports */
+		port_map = (1 << ahci_nr_ports(cap)) - 1;
+	}
+
+	/* record values to use during operation */
+	hpriv->cap = cap;
+	hpriv->port_map = port_map;
+}
+
+/**
+ *	ahci_restore_initial_config - Restore initial config
+ *	@host: target ATA host
+ *
+ *	Restore initial config stored by ahci_save_initial_config().
+ *
+ *	LOCKING:
+ *	None.
+ */
+static void ahci_restore_initial_config(struct ata_host *host)
+{
+	struct ahci_host_priv *hpriv = host->private_data;
+	void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
+
+	writel(hpriv->saved_cap, mmio + HOST_CAP);
+	writel(hpriv->saved_port_map, mmio + HOST_PORTS_IMPL);
+	(void) readl(mmio + HOST_PORTS_IMPL);	/* flush */
 }
 
 static u32 ahci_scr_read (struct ata_port *ap, unsigned int sc_reg_in)
@@ -511,8 +587,9 @@ static void ahci_scr_write (struct ata_port *ap, unsigned int sc_reg_in,
 	writel(val, ap->ioaddr.scr_addr + (sc_reg * 4));
 }
 
-static void ahci_start_engine(void __iomem *port_mmio)
+static void ahci_start_engine(struct ata_port *ap)
 {
+	void __iomem *port_mmio = ahci_port_base(ap);
 	u32 tmp;
 
 	/* start DMA */
@@ -522,8 +599,9 @@ static void ahci_start_engine(void __iomem *port_mmio)
 	readl(port_mmio + PORT_CMD); /* flush */
 }
 
-static int ahci_stop_engine(void __iomem *port_mmio)
+static int ahci_stop_engine(struct ata_port *ap)
 {
+	void __iomem *port_mmio = ahci_port_base(ap);
 	u32 tmp;
 
 	tmp = readl(port_mmio + PORT_CMD);
@@ -545,19 +623,23 @@ static int ahci_stop_engine(void __iomem *port_mmio)
 	return 0;
 }
 
-static void ahci_start_fis_rx(void __iomem *port_mmio, u32 cap,
-			      dma_addr_t cmd_slot_dma, dma_addr_t rx_fis_dma)
+static void ahci_start_fis_rx(struct ata_port *ap)
 {
+	void __iomem *port_mmio = ahci_port_base(ap);
+	struct ahci_host_priv *hpriv = ap->host->private_data;
+	struct ahci_port_priv *pp = ap->private_data;
 	u32 tmp;
 
 	/* set FIS registers */
-	if (cap & HOST_CAP_64)
-		writel((cmd_slot_dma >> 16) >> 16, port_mmio + PORT_LST_ADDR_HI);
-	writel(cmd_slot_dma & 0xffffffff, port_mmio + PORT_LST_ADDR);
+	if (hpriv->cap & HOST_CAP_64)
+		writel((pp->cmd_slot_dma >> 16) >> 16,
+		       port_mmio + PORT_LST_ADDR_HI);
+	writel(pp->cmd_slot_dma & 0xffffffff, port_mmio + PORT_LST_ADDR);
 
-	if (cap & HOST_CAP_64)
-		writel((rx_fis_dma >> 16) >> 16, port_mmio + PORT_FIS_ADDR_HI);
-	writel(rx_fis_dma & 0xffffffff, port_mmio + PORT_FIS_ADDR);
+	if (hpriv->cap & HOST_CAP_64)
+		writel((pp->rx_fis_dma >> 16) >> 16,
+		       port_mmio + PORT_FIS_ADDR_HI);
+	writel(pp->rx_fis_dma & 0xffffffff, port_mmio + PORT_FIS_ADDR);
 
 	/* enable FIS reception */
 	tmp = readl(port_mmio + PORT_CMD);
@@ -568,8 +650,9 @@ static void ahci_start_fis_rx(void __iomem *port_mmio, u32 cap,
 	readl(port_mmio + PORT_CMD);
 }
 
-static int ahci_stop_fis_rx(void __iomem *port_mmio)
+static int ahci_stop_fis_rx(struct ata_port *ap)
 {
+	void __iomem *port_mmio = ahci_port_base(ap);
 	u32 tmp;
 
 	/* disable FIS reception */
@@ -586,14 +669,16 @@ static int ahci_stop_fis_rx(void __iomem *port_mmio)
 	return 0;
 }
 
-static void ahci_power_up(void __iomem *port_mmio, u32 cap)
+static void ahci_power_up(struct ata_port *ap)
 {
+	struct ahci_host_priv *hpriv = ap->host->private_data;
+	void __iomem *port_mmio = ahci_port_base(ap);
 	u32 cmd;
 
 	cmd = readl(port_mmio + PORT_CMD) & ~PORT_CMD_ICC_MASK;
 
 	/* spin up device */
-	if (cap & HOST_CAP_SSS) {
+	if (hpriv->cap & HOST_CAP_SSS) {
 		cmd |= PORT_CMD_SPIN_UP;
 		writel(cmd, port_mmio + PORT_CMD);
 	}
@@ -603,11 +688,13 @@ static void ahci_power_up(void __iomem *port_mmio, u32 cap)
 }
 
 #ifdef CONFIG_PM
-static void ahci_power_down(void __iomem *port_mmio, u32 cap)
+static void ahci_power_down(struct ata_port *ap)
 {
+	struct ahci_host_priv *hpriv = ap->host->private_data;
+	void __iomem *port_mmio = ahci_port_base(ap);
 	u32 cmd, scontrol;
 
-	if (!(cap & HOST_CAP_SSS))
+	if (!(hpriv->cap & HOST_CAP_SSS))
 		return;
 
 	/* put device into listen mode, first set PxSCTL.DET to 0 */
@@ -622,29 +709,28 @@ static void ahci_power_down(void __iomem *port_mmio, u32 cap)
 }
 #endif
 
-static void ahci_init_port(void __iomem *port_mmio, u32 cap,
-			   dma_addr_t cmd_slot_dma, dma_addr_t rx_fis_dma)
+static void ahci_init_port(struct ata_port *ap)
 {
 	/* enable FIS reception */
-	ahci_start_fis_rx(port_mmio, cap, cmd_slot_dma, rx_fis_dma);
+	ahci_start_fis_rx(ap);
 
 	/* enable DMA */
-	ahci_start_engine(port_mmio);
+	ahci_start_engine(ap);
 }
 
-static int ahci_deinit_port(void __iomem *port_mmio, u32 cap, const char **emsg)
+static int ahci_deinit_port(struct ata_port *ap, const char **emsg)
 {
 	int rc;
 
 	/* disable DMA */
-	rc = ahci_stop_engine(port_mmio);
+	rc = ahci_stop_engine(ap);
 	if (rc) {
 		*emsg = "failed to stop engine";
 		return rc;
 	}
 
 	/* disable FIS reception */
-	rc = ahci_stop_fis_rx(port_mmio);
+	rc = ahci_stop_fis_rx(ap);
 	if (rc) {
 		*emsg = "failed stop FIS RX";
 		return rc;
@@ -653,12 +739,11 @@ static int ahci_deinit_port(void __iomem *port_mmio, u32 cap, const char **emsg)
 	return 0;
 }
 
-static int ahci_reset_controller(void __iomem *mmio, struct pci_dev *pdev)
+static int ahci_reset_controller(struct ata_host *host)
 {
-	u32 cap_save, impl_save, tmp;
-
-	cap_save = readl(mmio + HOST_CAP);
-	impl_save = readl(mmio + HOST_PORTS_IMPL);
+	struct pci_dev *pdev = to_pci_dev(host->dev);
+	void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
+	u32 tmp;
 
 	/* global controller reset */
 	tmp = readl(mmio + HOST_CTL);
@@ -674,7 +759,7 @@ static int ahci_reset_controller(void __iomem *mmio, struct pci_dev *pdev)
 
 	tmp = readl(mmio + HOST_CTL);
 	if (tmp & HOST_RESET) {
-		dev_printk(KERN_ERR, &pdev->dev,
+		dev_printk(KERN_ERR, host->dev,
 			   "controller reset failed (0x%x)\n", tmp);
 		return -EIO;
 	}
@@ -683,18 +768,8 @@ static int ahci_reset_controller(void __iomem *mmio, struct pci_dev *pdev)
 	writel(HOST_AHCI_EN, mmio + HOST_CTL);
 	(void) readl(mmio + HOST_CTL);	/* flush */
 
-	/* These write-once registers are normally cleared on reset.
-	 * Restore BIOS values... which we HOPE were present before
-	 * reset.
-	 */
-	if (!impl_save) {
-		impl_save = (1 << ahci_nr_ports(cap_save)) - 1;
-		dev_printk(KERN_WARNING, &pdev->dev,
-			   "PORTS_IMPL is zero, forcing 0x%x\n", impl_save);
-	}
-	writel(cap_save, mmio + HOST_CAP);
-	writel(impl_save, mmio + HOST_PORTS_IMPL);
-	(void) readl(mmio + HOST_PORTS_IMPL);	/* flush */
+	/* some registers might be cleared on reset.  restore initial values */
+	ahci_restore_initial_config(host);
 
 	if (pdev->vendor == PCI_VENDOR_ID_INTEL) {
 		u16 tmp16;
@@ -708,23 +783,23 @@ static int ahci_reset_controller(void __iomem *mmio, struct pci_dev *pdev)
 	return 0;
 }
 
-static void ahci_init_controller(void __iomem *mmio, struct pci_dev *pdev,
-				 int n_ports, unsigned int port_flags,
-				 struct ahci_host_priv *hpriv)
+static void ahci_init_controller(struct ata_host *host)
 {
+	struct pci_dev *pdev = to_pci_dev(host->dev);
+	void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
 	int i, rc;
 	u32 tmp;
 
-	for (i = 0; i < n_ports; i++) {
-		void __iomem *port_mmio = ahci_port_base(mmio, i);
+	for (i = 0; i < host->n_ports; i++) {
+		struct ata_port *ap = host->ports[i];
+		void __iomem *port_mmio = ahci_port_base(ap);
 		const char *emsg = NULL;
 
-		if ((port_flags & AHCI_FLAG_HONOR_PI) &&
-		    !(hpriv->port_map & (1 << i)))
+		if (ata_port_is_dummy(ap))
 			continue;
 
 		/* make sure port is not active */
-		rc = ahci_deinit_port(port_mmio, hpriv->cap, &emsg);
+		rc = ahci_deinit_port(ap, &emsg);
 		if (rc)
 			dev_printk(KERN_WARNING, &pdev->dev,
 				   "%s (%d)\n", emsg, rc);
@@ -752,7 +827,7 @@ static void ahci_init_controller(void __iomem *mmio, struct pci_dev *pdev,
 
 static unsigned int ahci_dev_classify(struct ata_port *ap)
 {
-	void __iomem *port_mmio = ap->ioaddr.cmd_addr;
+	void __iomem *port_mmio = ahci_port_base(ap);
 	struct ata_taskfile tf;
 	u32 tmp;
 
@@ -802,8 +877,7 @@ static int ahci_clo(struct ata_port *ap)
 static int ahci_softreset(struct ata_port *ap, unsigned int *class)
 {
 	struct ahci_port_priv *pp = ap->private_data;
-	void __iomem *mmio = ap->host->iomap[AHCI_PCI_BAR];
-	void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no);
+	void __iomem *port_mmio = ahci_port_base(ap);
 	const u32 cmd_fis_len = 5; /* five dwords */
 	const char *reason = NULL;
 	struct ata_taskfile tf;
@@ -820,7 +894,7 @@ static int ahci_softreset(struct ata_port *ap, unsigned int *class)
 	}
 
 	/* prepare for SRST (AHCI-1.1 10.4.1) */
-	rc = ahci_stop_engine(port_mmio);
+	rc = ahci_stop_engine(ap);
 	if (rc) {
 		reason = "failed to stop engine";
 		goto fail_restart;
@@ -840,7 +914,7 @@ static int ahci_softreset(struct ata_port *ap, unsigned int *class)
 	}
 
 	/* restart engine */
-	ahci_start_engine(port_mmio);
+	ahci_start_engine(ap);
 
 	ata_tf_init(ap->device, &tf);
 	fis = pp->cmd_tbl;
@@ -899,7 +973,7 @@ static int ahci_softreset(struct ata_port *ap, unsigned int *class)
 	return 0;
 
  fail_restart:
-	ahci_start_engine(port_mmio);
+	ahci_start_engine(ap);
  fail:
 	ata_port_printk(ap, KERN_ERR, "softreset failed (%s)\n", reason);
 	return rc;
@@ -910,13 +984,11 @@ static int ahci_hardreset(struct ata_port *ap, unsigned int *class)
 	struct ahci_port_priv *pp = ap->private_data;
 	u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
 	struct ata_taskfile tf;
-	void __iomem *mmio = ap->host->iomap[AHCI_PCI_BAR];
-	void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no);
 	int rc;
 
 	DPRINTK("ENTER\n");
 
-	ahci_stop_engine(port_mmio);
+	ahci_stop_engine(ap);
 
 	/* clear D2H reception area to properly wait for D2H FIS */
 	ata_tf_init(ap->device, &tf);
@@ -925,7 +997,7 @@ static int ahci_hardreset(struct ata_port *ap, unsigned int *class)
 
 	rc = sata_std_hardreset(ap, class);
 
-	ahci_start_engine(port_mmio);
+	ahci_start_engine(ap);
 
 	if (rc == 0 && ata_port_online(ap))
 		*class = ahci_dev_classify(ap);
@@ -938,20 +1010,18 @@ static int ahci_hardreset(struct ata_port *ap, unsigned int *class)
 
 static int ahci_vt8251_hardreset(struct ata_port *ap, unsigned int *class)
 {
-	void __iomem *mmio = ap->host->iomap[AHCI_PCI_BAR];
-	void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no);
 	int rc;
 
 	DPRINTK("ENTER\n");
 
-	ahci_stop_engine(port_mmio);
+	ahci_stop_engine(ap);
 
 	rc = sata_port_hardreset(ap, sata_ehc_deb_timing(&ap->eh_context));
 
 	/* vt8251 needs SError cleared for the port to operate */
 	ahci_scr_write(ap, SCR_ERROR, ahci_scr_read(ap, SCR_ERROR));
 
-	ahci_start_engine(port_mmio);
+	ahci_start_engine(ap);
 
 	DPRINTK("EXIT, rc=%d, class=%u\n", rc, *class);
 
@@ -963,7 +1033,7 @@ static int ahci_vt8251_hardreset(struct ata_port *ap, unsigned int *class)
 
 static void ahci_postreset(struct ata_port *ap, unsigned int *class)
 {
-	void __iomem *port_mmio = ap->ioaddr.cmd_addr;
+	void __iomem *port_mmio = ahci_port_base(ap);
 	u32 new_tmp, tmp;
 
 	ata_std_postreset(ap, class);
@@ -1131,8 +1201,7 @@ static void ahci_error_intr(struct ata_port *ap, u32 irq_stat)
 
 static void ahci_host_intr(struct ata_port *ap)
 {
-	void __iomem *mmio = ap->host->iomap[AHCI_PCI_BAR];
-	void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no);
+	void __iomem *port_mmio = ap->ioaddr.cmd_addr;
 	struct ata_eh_info *ehi = &ap->eh_info;
 	struct ahci_port_priv *pp = ap->private_data;
 	u32 status, qc_active;
@@ -1283,7 +1352,7 @@ static irqreturn_t ahci_interrupt(int irq, void *dev_instance)
 static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc)
 {
 	struct ata_port *ap = qc->ap;
-	void __iomem *port_mmio = ap->ioaddr.cmd_addr;
+	void __iomem *port_mmio = ahci_port_base(ap);
 
 	if (qc->tf.protocol == ATA_PROT_NCQ)
 		writel(1 << qc->tag, port_mmio + PORT_SCR_ACT);
@@ -1295,8 +1364,7 @@ static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc)
 
 static void ahci_freeze(struct ata_port *ap)
 {
-	void __iomem *mmio = ap->host->iomap[AHCI_PCI_BAR];
-	void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no);
+	void __iomem *port_mmio = ahci_port_base(ap);
 
 	/* turn IRQ off */
 	writel(0, port_mmio + PORT_IRQ_MASK);
@@ -1305,7 +1373,7 @@ static void ahci_freeze(struct ata_port *ap)
 static void ahci_thaw(struct ata_port *ap)
 {
 	void __iomem *mmio = ap->host->iomap[AHCI_PCI_BAR];
-	void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no);
+	void __iomem *port_mmio = ahci_port_base(ap);
 	u32 tmp;
 
 	/* clear IRQ */
@@ -1319,13 +1387,10 @@ static void ahci_thaw(struct ata_port *ap)
 
 static void ahci_error_handler(struct ata_port *ap)
 {
-	void __iomem *mmio = ap->host->iomap[AHCI_PCI_BAR];
-	void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no);
-
 	if (!(ap->pflags & ATA_PFLAG_FROZEN)) {
 		/* restart engine */
-		ahci_stop_engine(port_mmio);
-		ahci_start_engine(port_mmio);
+		ahci_stop_engine(ap);
+		ahci_start_engine(ap);
 	}
 
 	/* perform recovery */
@@ -1335,13 +1400,10 @@ static void ahci_error_handler(struct ata_port *ap)
 
 static void ahci_vt8251_error_handler(struct ata_port *ap)
 {
-	void __iomem *mmio = ap->host->iomap[AHCI_PCI_BAR];
-	void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no);
-
 	if (!(ap->pflags & ATA_PFLAG_FROZEN)) {
 		/* restart engine */
-		ahci_stop_engine(port_mmio);
-		ahci_start_engine(port_mmio);
+		ahci_stop_engine(ap);
+		ahci_start_engine(ap);
 	}
 
 	/* perform recovery */
@@ -1352,36 +1414,26 @@ static void ahci_vt8251_error_handler(struct ata_port *ap)
 static void ahci_post_internal_cmd(struct ata_queued_cmd *qc)
 {
 	struct ata_port *ap = qc->ap;
-	void __iomem *mmio = ap->host->iomap[AHCI_PCI_BAR];
-	void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no);
 
-	if (qc->flags & ATA_QCFLAG_FAILED)
-		qc->err_mask |= AC_ERR_OTHER;
-
-	if (qc->err_mask) {
+	if (qc->flags & ATA_QCFLAG_FAILED) {
 		/* make DMA engine forget about the failed command */
-		ahci_stop_engine(port_mmio);
-		ahci_start_engine(port_mmio);
+		ahci_stop_engine(ap);
+		ahci_start_engine(ap);
 	}
 }
 
 #ifdef CONFIG_PM
 static int ahci_port_suspend(struct ata_port *ap, pm_message_t mesg)
 {
-	struct ahci_host_priv *hpriv = ap->host->private_data;
-	struct ahci_port_priv *pp = ap->private_data;
-	void __iomem *mmio = ap->host->iomap[AHCI_PCI_BAR];
-	void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no);
 	const char *emsg = NULL;
 	int rc;
 
-	rc = ahci_deinit_port(port_mmio, hpriv->cap, &emsg);
+	rc = ahci_deinit_port(ap, &emsg);
 	if (rc == 0)
-		ahci_power_down(port_mmio, hpriv->cap);
+		ahci_power_down(ap);
 	else {
 		ata_port_printk(ap, KERN_ERR, "%s (%d)\n", emsg, rc);
-		ahci_init_port(port_mmio, hpriv->cap,
-			       pp->cmd_slot_dma, pp->rx_fis_dma);
+		ahci_init_port(ap);
 	}
 
 	return rc;
@@ -1389,13 +1441,8 @@ static int ahci_port_suspend(struct ata_port *ap, pm_message_t mesg)
 
 static int ahci_port_resume(struct ata_port *ap)
 {
-	struct ahci_port_priv *pp = ap->private_data;
-	struct ahci_host_priv *hpriv = ap->host->private_data;
-	void __iomem *mmio = ap->host->iomap[AHCI_PCI_BAR];
-	void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no);
-
-	ahci_power_up(port_mmio, hpriv->cap);
-	ahci_init_port(port_mmio, hpriv->cap, pp->cmd_slot_dma, pp->rx_fis_dma);
+	ahci_power_up(ap);
+	ahci_init_port(ap);
 
 	return 0;
 }
@@ -1423,8 +1470,6 @@ static int ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg)
 static int ahci_pci_device_resume(struct pci_dev *pdev)
 {
 	struct ata_host *host = dev_get_drvdata(&pdev->dev);
-	struct ahci_host_priv *hpriv = host->private_data;
-	void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
 	int rc;
 
 	rc = ata_pci_device_do_resume(pdev);
@@ -1432,12 +1477,11 @@ static int ahci_pci_device_resume(struct pci_dev *pdev)
 		return rc;
 
 	if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) {
-		rc = ahci_reset_controller(mmio, pdev);
+		rc = ahci_reset_controller(host);
 		if (rc)
 			return rc;
 
-		ahci_init_controller(mmio, pdev, host->n_ports,
-				     host->ports[0]->flags, hpriv);
+		ahci_init_controller(host);
 	}
 
 	ata_host_resume(host);
@@ -1449,10 +1493,7 @@ static int ahci_pci_device_resume(struct pci_dev *pdev)
 static int ahci_port_start(struct ata_port *ap)
 {
 	struct device *dev = ap->host->dev;
-	struct ahci_host_priv *hpriv = ap->host->private_data;
 	struct ahci_port_priv *pp;
-	void __iomem *mmio = ap->host->iomap[AHCI_PCI_BAR];
-	void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no);
 	void *mem;
 	dma_addr_t mem_dma;
 	int rc;
@@ -1500,85 +1541,29 @@ static int ahci_port_start(struct ata_port *ap)
 	ap->private_data = pp;
 
 	/* power up port */
-	ahci_power_up(port_mmio, hpriv->cap);
+	ahci_power_up(ap);
 
 	/* initialize port */
-	ahci_init_port(port_mmio, hpriv->cap, pp->cmd_slot_dma, pp->rx_fis_dma);
+	ahci_init_port(ap);
 
 	return 0;
 }
 
 static void ahci_port_stop(struct ata_port *ap)
 {
-	struct ahci_host_priv *hpriv = ap->host->private_data;
-	void __iomem *mmio = ap->host->iomap[AHCI_PCI_BAR];
-	void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no);
 	const char *emsg = NULL;
 	int rc;
 
 	/* de-initialize port */
-	rc = ahci_deinit_port(port_mmio, hpriv->cap, &emsg);
+	rc = ahci_deinit_port(ap, &emsg);
 	if (rc)
 		ata_port_printk(ap, KERN_WARNING, "%s (%d)\n", emsg, rc);
 }
 
-static void ahci_setup_port(struct ata_ioports *port, void __iomem *base,
-			    unsigned int port_idx)
+static int ahci_configure_dma_masks(struct pci_dev *pdev, int using_dac)
 {
-	VPRINTK("ENTER, base==0x%lx, port_idx %u\n", base, port_idx);
-	base = ahci_port_base(base, port_idx);
-	VPRINTK("base now==0x%lx\n", base);
-
-	port->cmd_addr		= base;
-	port->scr_addr		= base + PORT_SCR;
-
-	VPRINTK("EXIT\n");
-}
-
-static int ahci_host_init(struct ata_probe_ent *probe_ent)
-{
-	struct ahci_host_priv *hpriv = probe_ent->private_data;
-	struct pci_dev *pdev = to_pci_dev(probe_ent->dev);
-	void __iomem *mmio = probe_ent->iomap[AHCI_PCI_BAR];
-	unsigned int i, cap_n_ports, using_dac;
 	int rc;
 
-	rc = ahci_reset_controller(mmio, pdev);
-	if (rc)
-		return rc;
-
-	hpriv->cap = readl(mmio + HOST_CAP);
-	hpriv->port_map = readl(mmio + HOST_PORTS_IMPL);
-	cap_n_ports = ahci_nr_ports(hpriv->cap);
-
-	VPRINTK("cap 0x%x  port_map 0x%x  n_ports %d\n",
-		hpriv->cap, hpriv->port_map, cap_n_ports);
-
-	if (probe_ent->port_flags & AHCI_FLAG_HONOR_PI) {
-		unsigned int n_ports = cap_n_ports;
-		u32 port_map = hpriv->port_map;
-		int max_port = 0;
-
-		for (i = 0; i < AHCI_MAX_PORTS && n_ports; i++) {
-			if (port_map & (1 << i)) {
-				n_ports--;
-				port_map &= ~(1 << i);
-				max_port = i;
-			} else
-				probe_ent->dummy_port_mask |= 1 << i;
-		}
-
-		if (n_ports || port_map)
-			dev_printk(KERN_WARNING, &pdev->dev,
-				   "nr_ports (%u) and implemented port map "
-				   "(0x%x) don't match\n",
-				   cap_n_ports, hpriv->port_map);
-
-		probe_ent->n_ports = max_port + 1;
-	} else
-		probe_ent->n_ports = cap_n_ports;
-
-	using_dac = hpriv->cap & HOST_CAP_64;
 	if (using_dac &&
 	    !pci_set_dma_mask(pdev, DMA_64BIT_MASK)) {
 		rc = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK);
@@ -1604,23 +1589,14 @@ static int ahci_host_init(struct ata_probe_ent *probe_ent)
 			return rc;
 		}
 	}
-
-	for (i = 0; i < probe_ent->n_ports; i++)
-		ahci_setup_port(&probe_ent->port[i], mmio, i);
-
-	ahci_init_controller(mmio, pdev, probe_ent->n_ports,
-			     probe_ent->port_flags, hpriv);
-
-	pci_set_master(pdev);
-
 	return 0;
 }
 
-static void ahci_print_info(struct ata_probe_ent *probe_ent)
+static void ahci_print_info(struct ata_host *host)
 {
-	struct ahci_host_priv *hpriv = probe_ent->private_data;
-	struct pci_dev *pdev = to_pci_dev(probe_ent->dev);
-	void __iomem *mmio = probe_ent->iomap[AHCI_PCI_BAR];
+	struct ahci_host_priv *hpriv = host->private_data;
+	struct pci_dev *pdev = to_pci_dev(host->dev);
+	void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
 	u32 vers, cap, impl, speed;
 	const char *speed_s;
 	u16 cc;
@@ -1690,11 +1666,12 @@ static void ahci_print_info(struct ata_probe_ent *probe_ent)
 static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 {
 	static int printed_version;
-	unsigned int board_idx = (unsigned int) ent->driver_data;
+	struct ata_port_info pi = ahci_port_info[ent->driver_data];
+	const struct ata_port_info *ppi[] = { &pi, NULL };
 	struct device *dev = &pdev->dev;
-	struct ata_probe_ent *probe_ent;
 	struct ahci_host_priv *hpriv;
-	int rc;
+	struct ata_host *host;
+	int i, rc;
 
 	VPRINTK("ENTER\n");
 
@@ -1703,6 +1680,7 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (!printed_version++)
 		dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
 
+	/* acquire resources */
 	rc = pcim_enable_device(pdev);
 	if (rc)
 		return rc;
@@ -1716,44 +1694,49 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (pci_enable_msi(pdev))
 		pci_intx(pdev, 1);
 
-	probe_ent = devm_kzalloc(dev, sizeof(*probe_ent), GFP_KERNEL);
-	if (probe_ent == NULL)
-		return -ENOMEM;
-
-	probe_ent->dev = pci_dev_to_dev(pdev);
-	INIT_LIST_HEAD(&probe_ent->node);
-
 	hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL);
 	if (!hpriv)
 		return -ENOMEM;
 
-	probe_ent->sht		= ahci_port_info[board_idx].sht;
-	probe_ent->port_flags	= ahci_port_info[board_idx].flags;
-	probe_ent->pio_mask	= ahci_port_info[board_idx].pio_mask;
-	probe_ent->udma_mask	= ahci_port_info[board_idx].udma_mask;
-	probe_ent->port_ops	= ahci_port_info[board_idx].port_ops;
+	/* save initial config */
+	ahci_save_initial_config(pdev, &pi, hpriv);
 
-       	probe_ent->irq = pdev->irq;
-       	probe_ent->irq_flags = IRQF_SHARED;
-	probe_ent->iomap = pcim_iomap_table(pdev);
-	probe_ent->private_data = hpriv;
+	/* prepare host */
+	if (!(pi.flags & AHCI_FLAG_NO_NCQ) && (hpriv->cap & HOST_CAP_NCQ))
+		pi.flags |= ATA_FLAG_NCQ;
+
+	host = ata_host_alloc_pinfo(&pdev->dev, ppi, fls(hpriv->port_map));
+	if (!host)
+		return -ENOMEM;
+	host->iomap = pcim_iomap_table(pdev);
+	host->private_data = hpriv;
+
+	for (i = 0; i < host->n_ports; i++) {
+		if (hpriv->port_map & (1 << i)) {
+			struct ata_port *ap = host->ports[i];
+			void __iomem *port_mmio = ahci_port_base(ap);
+
+			ap->ioaddr.cmd_addr = port_mmio;
+			ap->ioaddr.scr_addr = port_mmio + PORT_SCR;
+		} else
+			host->ports[i]->ops = &ata_dummy_port_ops;
+	}
 
 	/* initialize adapter */
-	rc = ahci_host_init(probe_ent);
+	rc = ahci_configure_dma_masks(pdev, hpriv->cap & HOST_CAP_64);
 	if (rc)
 		return rc;
 
-	if (!(probe_ent->port_flags & AHCI_FLAG_NO_NCQ) &&
-	    (hpriv->cap & HOST_CAP_NCQ))
-		probe_ent->port_flags |= ATA_FLAG_NCQ;
-
-	ahci_print_info(probe_ent);
+	rc = ahci_reset_controller(host);
+	if (rc)
+		return rc;
 
-	if (!ata_device_add(probe_ent))
-		return -ENODEV;
+	ahci_init_controller(host);
+	ahci_print_info(host);
 
-	devm_kfree(dev, probe_ent);
-	return 0;
+	pci_set_master(pdev);
+	return ata_host_activate(host, pdev->irq, ahci_interrupt, IRQF_SHARED,
+				 &ahci_sht);
 }
 
 static int __init ahci_init(void)
diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c
index d8e7988..92a491d 100644
--- a/drivers/ata/ata_generic.c
+++ b/drivers/ata/ata_generic.c
@@ -33,35 +33,6 @@
  */
 
 /**
- *	generic_pre_reset		-	probe begin
- *	@ap: ATA port
- *
- *	Set up cable type and use generic probe init
- */
-
-static int generic_pre_reset(struct ata_port *ap)
-{
-	ap->cbl = ATA_CBL_PATA80;
-	return ata_std_prereset(ap);
-}
-
-
-/**
- *	generic_error_handler - Probe specified port on PATA host controller
- *	@ap: Port to probe
- *	@classes:
- *
- *	LOCKING:
- *	None (inherited from caller).
- */
-
-
-static void generic_error_handler(struct ata_port *ap)
-{
-	ata_bmdma_drive_eh(ap, generic_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
-}
-
-/**
  *	generic_set_mode	-	mode setting
  *	@ap: interface to set up
  *	@unused: returned device on error
@@ -144,8 +115,9 @@ static struct ata_port_operations generic_port_ops = {
 
 	.freeze		= ata_bmdma_freeze,
 	.thaw		= ata_bmdma_thaw,
-	.error_handler	= generic_error_handler,
+	.error_handler	= ata_bmdma_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= ata_cable_unknown,
 
 	.qc_prep 	= ata_qc_prep,
 	.qc_issue	= ata_qc_issue_prot,
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index b952c58..55d306a 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -93,7 +93,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"ata_piix"
-#define DRV_VERSION	"2.10ac1"
+#define DRV_VERSION	"2.11"
 
 enum {
 	PIIX_IOCFG		= 0x54, /* IDE I/O configuration register */
@@ -155,11 +155,11 @@ struct piix_host_priv {
 static int piix_init_one (struct pci_dev *pdev,
 				    const struct pci_device_id *ent);
 static void piix_pata_error_handler(struct ata_port *ap);
-static void ich_pata_error_handler(struct ata_port *ap);
 static void piix_sata_error_handler(struct ata_port *ap);
 static void piix_set_piomode (struct ata_port *ap, struct ata_device *adev);
 static void piix_set_dmamode (struct ata_port *ap, struct ata_device *adev);
 static void ich_set_dmamode (struct ata_port *ap, struct ata_device *adev);
+static int ich_pata_cable_detect(struct ata_port *ap);
 
 static unsigned int in_module_init = 1;
 
@@ -305,6 +305,7 @@ static const struct ata_port_operations piix_pata_ops = {
 	.thaw			= ata_bmdma_thaw,
 	.error_handler		= piix_pata_error_handler,
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
+	.cable_detect		= ata_cable_40wire,
 
 	.irq_handler		= ata_interrupt,
 	.irq_clear		= ata_bmdma_irq_clear,
@@ -336,8 +337,9 @@ static const struct ata_port_operations ich_pata_ops = {
 
 	.freeze			= ata_bmdma_freeze,
 	.thaw			= ata_bmdma_thaw,
-	.error_handler		= ich_pata_error_handler,
+	.error_handler		= piix_pata_error_handler,
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
+	.cable_detect		= ich_pata_cable_detect,
 
 	.irq_handler		= ata_interrupt,
 	.irq_clear		= ata_bmdma_irq_clear,
@@ -580,12 +582,13 @@ static const struct ich_laptop ich_laptop[] = {
 	/* devid, subvendor, subdev */
 	{ 0x27DF, 0x0005, 0x0280 },	/* ICH7 on Acer 5602WLMi */
 	{ 0x27DF, 0x1025, 0x0110 },	/* ICH7 on Acer 3682WLMi */
+	{ 0x27DF, 0x1043, 0x1267 },	/* ICH7 on Asus W5F */
 	/* end marker */
 	{ 0, }
 };
 
 /**
- *	piix_pata_cbl_detect - Probe host controller cable detect info
+ *	ich_pata_cable_detect - Probe host controller cable detect info
  *	@ap: Port for which cable detect info is desired
  *
  *	Read 80c cable indicator from ATA PCI device's PCI config
@@ -595,23 +598,18 @@ static const struct ich_laptop ich_laptop[] = {
  *	None (inherited from caller).
  */
 
-static void ich_pata_cbl_detect(struct ata_port *ap)
+static int ich_pata_cable_detect(struct ata_port *ap)
 {
 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 	const struct ich_laptop *lap = &ich_laptop[0];
 	u8 tmp, mask;
 
-	/* no 80c support in host controller? */
-	if ((ap->udma_mask & ~ATA_UDMA_MASK_40C) == 0)
-		goto cbl40;
-
 	/* Check for specials - Acer Aspire 5602WLMi */
 	while (lap->device) {
 		if (lap->device == pdev->device &&
 		    lap->subvendor == pdev->subsystem_vendor &&
 		    lap->subdevice == pdev->subsystem_device) {
-			ap->cbl = ATA_CBL_PATA40_SHORT;
-		    	return;
+			return ATA_CBL_PATA40_SHORT;
 		}
 		lap++;
 	}
@@ -620,20 +618,14 @@ static void ich_pata_cbl_detect(struct ata_port *ap)
 	mask = ap->port_no == 0 ? PIIX_80C_PRI : PIIX_80C_SEC;
 	pci_read_config_byte(pdev, PIIX_IOCFG, &tmp);
 	if ((tmp & mask) == 0)
-		goto cbl40;
-
-	ap->cbl = ATA_CBL_PATA80;
-	return;
-
-cbl40:
-	ap->cbl = ATA_CBL_PATA40;
+		return ATA_CBL_PATA40;
+	return ATA_CBL_PATA80;
 }
 
 /**
  *	piix_pata_prereset - prereset for PATA host controller
  *	@ap: Target port
  *
- *
  *	LOCKING:
  *	None (inherited from caller).
  */
@@ -643,8 +635,6 @@ static int piix_pata_prereset(struct ata_port *ap)
 
 	if (!pci_test_config_bits(pdev, &piix_enable_bits[ap->port_no]))
 		return -ENOENT;
-
-	ap->cbl = ATA_CBL_PATA40;
 	return ata_std_prereset(ap);
 }
 
@@ -655,30 +645,6 @@ static void piix_pata_error_handler(struct ata_port *ap)
 }
 
 
-/**
- *	ich_pata_prereset - prereset for PATA host controller
- *	@ap: Target port
- *
- *
- *	LOCKING:
- *	None (inherited from caller).
- */
-static int ich_pata_prereset(struct ata_port *ap)
-{
-	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
-
-	if (!pci_test_config_bits(pdev, &piix_enable_bits[ap->port_no]))
-		return -ENOENT;
-	ich_pata_cbl_detect(ap);
-	return ata_std_prereset(ap);
-}
-
-static void ich_pata_error_handler(struct ata_port *ap)
-{
-	ata_bmdma_drive_eh(ap, ich_pata_prereset, ata_std_softreset, NULL,
-			   ata_std_postreset);
-}
-
 static void piix_sata_error_handler(struct ata_port *ap)
 {
 	ata_bmdma_drive_eh(ap, ata_std_prereset, ata_std_softreset, NULL,
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 0abd72d..ca67484 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -72,7 +72,7 @@ static unsigned int ata_dev_init_params(struct ata_device *dev,
 static unsigned int ata_dev_set_xfermode(struct ata_device *dev);
 static void ata_dev_xfermask(struct ata_device *dev);
 
-static unsigned int ata_print_id = 1;
+unsigned int ata_print_id = 1;
 static struct workqueue_struct *ata_wq;
 
 struct workqueue_struct *ata_aux_wq;
@@ -89,6 +89,10 @@ int libata_fua = 0;
 module_param_named(fua, libata_fua, int, 0444);
 MODULE_PARM_DESC(fua, "FUA support (0=off, 1=on)");
 
+static int ata_ignore_hpa = 0;
+module_param_named(ignore_hpa, ata_ignore_hpa, int, 0644);
+MODULE_PARM_DESC(ignore_hpa, "Ignore HPA limit (0=keep BIOS limits, 1=ignore limits, using full disk)");
+
 static int ata_probe_timeout = ATA_TMOUT_INTERNAL / HZ;
 module_param(ata_probe_timeout, int, 0444);
 MODULE_PARM_DESC(ata_probe_timeout, "Set ATA probing timeout (seconds)");
@@ -808,6 +812,205 @@ void ata_id_c_string(const u16 *id, unsigned char *s,
 	*p = '\0';
 }
 
+static u64 ata_tf_to_lba48(struct ata_taskfile *tf)
+{
+	u64 sectors = 0;
+
+	sectors |= ((u64)(tf->hob_lbah & 0xff)) << 40;
+	sectors |= ((u64)(tf->hob_lbam & 0xff)) << 32;
+	sectors |= (tf->hob_lbal & 0xff) << 24;
+	sectors |= (tf->lbah & 0xff) << 16;
+	sectors |= (tf->lbam & 0xff) << 8;
+	sectors |= (tf->lbal & 0xff);
+
+	return ++sectors;
+}
+
+static u64 ata_tf_to_lba(struct ata_taskfile *tf)
+{
+	u64 sectors = 0;
+
+	sectors |= (tf->device & 0x0f) << 24;
+	sectors |= (tf->lbah & 0xff) << 16;
+	sectors |= (tf->lbam & 0xff) << 8;
+	sectors |= (tf->lbal & 0xff);
+
+	return ++sectors;
+}
+
+/**
+ *	ata_read_native_max_address_ext	-	LBA48 native max query
+ *	@dev: Device to query
+ *
+ *	Perform an LBA48 size query upon the device in question. Return the
+ *	actual LBA48 size or zero if the command fails.
+ */
+
+static u64 ata_read_native_max_address_ext(struct ata_device *dev)
+{
+	unsigned int err;
+	struct ata_taskfile tf;
+
+	ata_tf_init(dev, &tf);
+
+	tf.command = ATA_CMD_READ_NATIVE_MAX_EXT;
+	tf.flags |= ATA_TFLAG_DEVICE | ATA_TFLAG_LBA48 | ATA_TFLAG_ISADDR;
+	tf.protocol |= ATA_PROT_NODATA;
+	tf.device |= 0x40;
+
+	err = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0);
+	if (err)
+		return 0;
+
+	return ata_tf_to_lba48(&tf);
+}
+
+/**
+ *	ata_read_native_max_address	-	LBA28 native max query
+ *	@dev: Device to query
+ *
+ *	Performa an LBA28 size query upon the device in question. Return the
+ *	actual LBA28 size or zero if the command fails.
+ */
+
+static u64 ata_read_native_max_address(struct ata_device *dev)
+{
+	unsigned int err;
+	struct ata_taskfile tf;
+
+	ata_tf_init(dev, &tf);
+
+	tf.command = ATA_CMD_READ_NATIVE_MAX;
+	tf.flags |= ATA_TFLAG_DEVICE | ATA_TFLAG_ISADDR;
+	tf.protocol |= ATA_PROT_NODATA;
+	tf.device |= 0x40;
+
+	err = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0);
+	if (err)
+		return 0;
+
+	return ata_tf_to_lba(&tf);
+}
+
+/**
+ *	ata_set_native_max_address_ext	-	LBA48 native max set
+ *	@dev: Device to query
+ *
+ *	Perform an LBA48 size set max upon the device in question. Return the
+ *	actual LBA48 size or zero if the command fails.
+ */
+
+static u64 ata_set_native_max_address_ext(struct ata_device *dev, u64 new_sectors)
+{
+	unsigned int err;
+	struct ata_taskfile tf;
+
+	new_sectors--;
+
+	ata_tf_init(dev, &tf);
+
+	tf.command = ATA_CMD_SET_MAX_EXT;
+	tf.flags |= ATA_TFLAG_DEVICE | ATA_TFLAG_LBA48 | ATA_TFLAG_ISADDR;
+	tf.protocol |= ATA_PROT_NODATA;
+	tf.device |= 0x40;
+
+	tf.lbal = (new_sectors >> 0) & 0xff;
+	tf.lbam = (new_sectors >> 8) & 0xff;
+	tf.lbah = (new_sectors >> 16) & 0xff;
+
+	tf.hob_lbal = (new_sectors >> 24) & 0xff;
+	tf.hob_lbam = (new_sectors >> 32) & 0xff;
+	tf.hob_lbah = (new_sectors >> 40) & 0xff;
+
+	err = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0);
+	if (err)
+		return 0;
+
+	return ata_tf_to_lba48(&tf);
+}
+
+/**
+ *	ata_set_native_max_address	-	LBA28 native max set
+ *	@dev: Device to query
+ *
+ *	Perform an LBA28 size set max upon the device in question. Return the
+ *	actual LBA28 size or zero if the command fails.
+ */
+
+static u64 ata_set_native_max_address(struct ata_device *dev, u64 new_sectors)
+{
+	unsigned int err;
+	struct ata_taskfile tf;
+
+	new_sectors--;
+
+	ata_tf_init(dev, &tf);
+
+	tf.command = ATA_CMD_SET_MAX;
+	tf.flags |= ATA_TFLAG_DEVICE | ATA_TFLAG_ISADDR;
+	tf.protocol |= ATA_PROT_NODATA;
+
+	tf.lbal = (new_sectors >> 0) & 0xff;
+	tf.lbam = (new_sectors >> 8) & 0xff;
+	tf.lbah = (new_sectors >> 16) & 0xff;
+	tf.device |= ((new_sectors >> 24) & 0x0f) | 0x40;
+
+	err = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0);
+	if (err)
+		return 0;
+
+	return ata_tf_to_lba(&tf);
+}
+
+/**
+ *	ata_hpa_resize		-	Resize a device with an HPA set
+ *	@dev: Device to resize
+ *
+ *	Read the size of an LBA28 or LBA48 disk with HPA features and resize
+ *	it if required to the full size of the media. The caller must check
+ *	the drive has the HPA feature set enabled.
+ */
+
+static u64 ata_hpa_resize(struct ata_device *dev)
+{
+	u64 sectors = dev->n_sectors;
+	u64 hpa_sectors;
+	
+	if (ata_id_has_lba48(dev->id))
+		hpa_sectors = ata_read_native_max_address_ext(dev);
+	else
+		hpa_sectors = ata_read_native_max_address(dev);
+
+	/* if no hpa, both should be equal */
+	ata_dev_printk(dev, KERN_INFO, "%s 1: sectors = %lld, "
+				"hpa_sectors = %lld\n",
+		__FUNCTION__, (long long)sectors, (long long)hpa_sectors);
+
+	if (hpa_sectors > sectors) {
+		ata_dev_printk(dev, KERN_INFO,
+			"Host Protected Area detected:\n"
+			"\tcurrent size: %lld sectors\n"
+			"\tnative size: %lld sectors\n",
+			(long long)sectors, (long long)hpa_sectors);
+
+		if (ata_ignore_hpa) {
+			if (ata_id_has_lba48(dev->id))
+				hpa_sectors = ata_set_native_max_address_ext(dev, hpa_sectors);
+			else
+				hpa_sectors = ata_set_native_max_address(dev,
+								hpa_sectors);
+
+			if (hpa_sectors) {
+				ata_dev_printk(dev, KERN_INFO, "native size "
+					"increased to %lld sectors\n",
+					(long long)hpa_sectors);
+				return hpa_sectors;
+			}
+		}
+	}
+	return sectors;
+}
+
 static u64 ata_id_n_sectors(const u16 *id)
 {
 	if (ata_id_has_lba(id)) {
@@ -1270,12 +1473,16 @@ unsigned ata_exec_internal_sg(struct ata_device *dev,
 	if (ap->ops->post_internal_cmd)
 		ap->ops->post_internal_cmd(qc);
 
-	if ((qc->flags & ATA_QCFLAG_FAILED) && !qc->err_mask) {
-		if (ata_msg_warn(ap))
-			ata_dev_printk(dev, KERN_WARNING,
-				"zero err_mask for failed "
-				"internal command, assuming AC_ERR_OTHER\n");
-		qc->err_mask |= AC_ERR_OTHER;
+	/* perform minimal error analysis */
+	if (qc->flags & ATA_QCFLAG_FAILED) {
+		if (qc->result_tf.command & (ATA_ERR | ATA_DF))
+			qc->err_mask |= AC_ERR_DEV;
+
+		if (!qc->err_mask)
+			qc->err_mask |= AC_ERR_OTHER;
+
+		if (qc->err_mask & ~AC_ERR_OTHER)
+			qc->err_mask &= ~AC_ERR_OTHER;
 	}
 
 	/* finish up */
@@ -1379,30 +1586,44 @@ unsigned int ata_do_simple_cmd(struct ata_device *dev, u8 cmd)
  *	Check if the current speed of the device requires IORDY. Used
  *	by various controllers for chip configuration.
  */
-
+ 
 unsigned int ata_pio_need_iordy(const struct ata_device *adev)
 {
-	int pio;
-	int speed = adev->pio_mode - XFER_PIO_0;
-
-	if (speed < 2)
+	/* Controller doesn't support  IORDY. Probably a pointless check
+	   as the caller should know this */
+	if (adev->ap->flags & ATA_FLAG_NO_IORDY)
 		return 0;
-	if (speed > 2)
+	/* PIO3 and higher it is mandatory */
+	if (adev->pio_mode > XFER_PIO_2)
+		return 1;
+	/* We turn it on when possible */
+	if (ata_id_has_iordy(adev->id))
 		return 1;
+	return 0;
+}
 
+/**
+ *	ata_pio_mask_no_iordy	-	Return the non IORDY mask
+ *	@adev: ATA device
+ *
+ *	Compute the highest mode possible if we are not using iordy. Return
+ *	-1 if no iordy mode is available.
+ */
+ 
+static u32 ata_pio_mask_no_iordy(const struct ata_device *adev)
+{
 	/* If we have no drive specific rule, then PIO 2 is non IORDY */
-
 	if (adev->id[ATA_ID_FIELD_VALID] & 2) {	/* EIDE */
-		pio = adev->id[ATA_ID_EIDE_PIO];
+		u16 pio = adev->id[ATA_ID_EIDE_PIO];
 		/* Is the speed faster than the drive allows non IORDY ? */
 		if (pio) {
 			/* This is cycle times not frequency - watch the logic! */
 			if (pio > 240)	/* PIO2 is 240nS per cycle */
-				return 1;
-			return 0;
+				return 3 << ATA_SHIFT_PIO;
+			return 7 << ATA_SHIFT_PIO;
 		}
 	}
-	return 0;
+	return 3 << ATA_SHIFT_PIO;
 }
 
 /**
@@ -1431,13 +1652,13 @@ int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class,
 	struct ata_taskfile tf;
 	unsigned int err_mask = 0;
 	const char *reason;
+	int tried_spinup = 0;
 	int rc;
 
 	if (ata_msg_ctl(ap))
 		ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER\n", __FUNCTION__);
 
 	ata_dev_select(ap, dev->devno, 1, 1); /* select device 0/1 */
-
  retry:
 	ata_tf_init(dev, &tf);
 
@@ -1494,6 +1715,32 @@ int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class,
 			goto err_out;
 	}
 
+	if (!tried_spinup && (id[2] == 0x37c8 || id[2] == 0x738c)) {
+		tried_spinup = 1;
+		/*
+		 * Drive powered-up in standby mode, and requires a specific
+		 * SET_FEATURES spin-up subcommand before it will accept
+		 * anything other than the original IDENTIFY command.
+		 */
+		ata_tf_init(dev, &tf);
+		tf.command = ATA_CMD_SET_FEATURES;
+		tf.feature = SETFEATURES_SPINUP;
+		tf.protocol = ATA_PROT_NODATA;
+		tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
+		err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0);
+		if (err_mask) {
+			rc = -EIO;
+			reason = "SPINUP failed";
+			goto err_out;
+		}
+		/*
+		 * If the drive initially returned incomplete IDENTIFY info,
+		 * we now must reissue the IDENTIFY command.
+		 */
+		if (id[2] == 0x37c8)
+			goto retry;
+	}
+
 	if ((flags & ATA_READID_POSTRESET) && class == ATA_DEV_ATA) {
 		/*
 		 * The exact sequence expected by certain pre-ATA4 drives is:
@@ -1560,20 +1807,6 @@ static void ata_dev_config_ncq(struct ata_device *dev,
 		snprintf(desc, desc_sz, "NCQ (depth %d/%d)", hdepth, ddepth);
 }
 
-static void ata_set_port_max_cmd_len(struct ata_port *ap)
-{
-	int i;
-
-	if (ap->scsi_host) {
-		unsigned int len = 0;
-
-		for (i = 0; i < ATA_MAX_DEVICES; i++)
-			len = max(len, ap->device[i].cdb_len);
-
-		ap->scsi_host->max_cmd_len = len;
-	}
-}
-
 /**
  *	ata_dev_configure - Configure the specified ATA/ATAPI device
  *	@dev: Target device to configure
@@ -1658,6 +1891,7 @@ int ata_dev_configure(struct ata_device *dev)
 			snprintf(revbuf, 7, "ATA-%d",  ata_id_major_version(id));
 
 		dev->n_sectors = ata_id_n_sectors(id);
+		dev->n_sectors_boot = dev->n_sectors;
 
 		/* SCSI only uses 4-char revisions, dump full 8 chars from ATA */
 		ata_id_c_string(dev->id, fwrevbuf, ATA_ID_FW_REV,
@@ -1684,6 +1918,9 @@ int ata_dev_configure(struct ata_device *dev)
 					dev->flags |= ATA_DFLAG_FLUSH_EXT;
 			}
 
+			if (ata_id_hpa_enabled(dev->id))
+				dev->n_sectors = ata_hpa_resize(dev);
+
 			/* config NCQ */
 			ata_dev_config_ncq(dev, ncq_desc, sizeof(ncq_desc));
 
@@ -1773,8 +2010,6 @@ int ata_dev_configure(struct ata_device *dev)
 		}
 	}
 
-	ata_set_port_max_cmd_len(ap);
-
 	/* limit bridge transfers to udma5, 200 sectors */
 	if (ata_dev_knobble(dev)) {
 		if (ata_msg_drv(ap) && print_info)
@@ -1785,14 +2020,15 @@ int ata_dev_configure(struct ata_device *dev)
 	}
 
 	if (ata_device_blacklisted(dev) & ATA_HORKAGE_MAX_SEC_128)
-		dev->max_sectors = min(ATA_MAX_SECTORS_128, dev->max_sectors);
+		dev->max_sectors = min_t(unsigned int, ATA_MAX_SECTORS_128,
+					 dev->max_sectors);
 
 	/* limit ATAPI DMA to R/W commands only */
 	if (ata_device_blacklisted(dev) & ATA_HORKAGE_DMA_RW_ONLY)
 		dev->horkage |= ATA_HORKAGE_DMA_RW_ONLY;
 
 	if (ap->ops->dev_config)
-		ap->ops->dev_config(ap, dev);
+		ap->ops->dev_config(dev);
 
 	if (ata_msg_probe(ap))
 		ata_dev_printk(dev, KERN_DEBUG, "%s: EXIT, drv_stat = 0x%x\n",
@@ -1807,6 +2043,56 @@ err_out_nosup:
 }
 
 /**
+ *	ata_cable_40wire	-	return 40 wire cable type
+ *	@ap: port
+ *
+ *	Helper method for drivers which want to hardwire 40 wire cable
+ *	detection.
+ */
+
+int ata_cable_40wire(struct ata_port *ap)
+{
+	return ATA_CBL_PATA40;
+}
+
+/**
+ *	ata_cable_80wire	-	return 80 wire cable type
+ *	@ap: port
+ *
+ *	Helper method for drivers which want to hardwire 80 wire cable
+ *	detection.
+ */
+
+int ata_cable_80wire(struct ata_port *ap)
+{
+	return ATA_CBL_PATA80;
+}
+
+/**
+ *	ata_cable_unknown	-	return unknown PATA cable.
+ *	@ap: port
+ *
+ *	Helper method for drivers which have no PATA cable detection.
+ */
+
+int ata_cable_unknown(struct ata_port *ap)
+{
+	return ATA_CBL_PATA_UNK;
+}
+
+/**
+ *	ata_cable_sata	-	return SATA cable type
+ *	@ap: port
+ *
+ *	Helper method for drivers which have SATA cables
+ */
+
+int ata_cable_sata(struct ata_port *ap)
+{
+	return ATA_CBL_SATA;
+}
+
+/**
  *	ata_bus_probe - Reset and probe ATA bus
  *	@ap: Bus to probe
  *
@@ -1876,6 +2162,10 @@ int ata_bus_probe(struct ata_port *ap)
 			goto fail;
 	}
 
+	/* Now ask for the cable type as PDIAG- should have been released */
+	if (ap->ops->cable_detect)
+		ap->cbl = ap->ops->cable_detect(ap);
+
 	/* After the identify sequence we can now set up the devices. We do
 	   this in the normal order so that the user doesn't get confused */
 
@@ -1958,7 +2248,7 @@ void ata_port_probe(struct ata_port *ap)
  *	LOCKING:
  *	None.
  */
-static void sata_print_link_status(struct ata_port *ap)
+void sata_print_link_status(struct ata_port *ap)
 {
 	u32 sstatus, scontrol, tmp;
 
@@ -2352,6 +2642,12 @@ int ata_timing_compute(struct ata_device *adev, unsigned short speed,
 		t->active += (t->cycle - (t->active + t->recover)) / 2;
 		t->recover = t->cycle - t->active;
 	}
+	
+	/* In a few cases quantisation may produce enough errors to
+	   leave t->cycle too low for the sum of active and recovery
+	   if so we must correct this */
+	if (t->active + t->recover > t->cycle)
+		t->cycle = t->active + t->recover;
 
 	return 0;
 }
@@ -2481,12 +2777,13 @@ static int ata_dev_set_mode(struct ata_device *dev)
 }
 
 /**
- *	ata_set_mode - Program timings and issue SET FEATURES - XFER
+ *	ata_do_set_mode - Program timings and issue SET FEATURES - XFER
  *	@ap: port on which timings will be programmed
  *	@r_failed_dev: out paramter for failed device
  *
- *	Set ATA device disk transfer mode (PIO3, UDMA6, etc.).  If
- *	ata_set_mode() fails, pointer to the failing device is
+ *	Standard implementation of the function used to tune and set
+ *	ATA device disk transfer mode (PIO3, UDMA6, etc.).  If
+ *	ata_dev_set_mode() fails, pointer to the failing device is
  *	returned in @r_failed_dev.
  *
  *	LOCKING:
@@ -2495,14 +2792,12 @@ static int ata_dev_set_mode(struct ata_device *dev)
  *	RETURNS:
  *	0 on success, negative errno otherwise
  */
-int ata_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev)
+
+int ata_do_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev)
 {
 	struct ata_device *dev;
 	int i, rc = 0, used_dma = 0, found = 0;
 
-	/* has private set_mode? */
-	if (ap->ops->set_mode)
-		return ap->ops->set_mode(ap, r_failed_dev);
 
 	/* step 1: calculate xfer_mask */
 	for (i = 0; i < ATA_MAX_DEVICES; i++) {
@@ -2587,6 +2882,29 @@ int ata_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev)
 }
 
 /**
+ *	ata_set_mode - Program timings and issue SET FEATURES - XFER
+ *	@ap: port on which timings will be programmed
+ *	@r_failed_dev: out paramter for failed device
+ *
+ *	Set ATA device disk transfer mode (PIO3, UDMA6, etc.).  If
+ *	ata_set_mode() fails, pointer to the failing device is
+ *	returned in @r_failed_dev.
+ *
+ *	LOCKING:
+ *	PCI/etc. bus probe sem.
+ *
+ *	RETURNS:
+ *	0 on success, negative errno otherwise
+ */
+int ata_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev)
+{
+	/* has private set_mode? */
+	if (ap->ops->set_mode)
+		return ap->ops->set_mode(ap, r_failed_dev);
+	return ata_do_set_mode(ap, r_failed_dev);
+}
+
+/**
  *	ata_tf_to_host - issue ATA taskfile to host controller
  *	@ap: port to which command is being issued
  *	@tf: ATA taskfile register set
@@ -3267,6 +3585,11 @@ static int ata_dev_same_device(struct ata_device *dev, unsigned int new_class,
 			       "%llu != %llu\n",
 			       (unsigned long long)dev->n_sectors,
 			       (unsigned long long)new_n_sectors);
+		/* Are we the boot time size - if so we appear to be the
+		   same disk at this point and our HPA got reapplied */
+		if (ata_ignore_hpa && dev->n_sectors_boot == new_n_sectors 
+		    && ata_id_hpa_enabled(new_id))
+			return 1;
 		return 0;
 	}
 
@@ -3441,19 +3764,7 @@ static void ata_dev_xfermask(struct ata_device *dev)
 	xfer_mask = ata_pack_xfermask(ap->pio_mask,
 				      ap->mwdma_mask, ap->udma_mask);
 
-	/* Apply cable rule here.  Don't apply it early because when
-	 * we handle hot plug the cable type can itself change.
-	 */
-	if (ap->cbl == ATA_CBL_PATA40)
-		xfer_mask &= ~(0xF8 << ATA_SHIFT_UDMA);
-	/* Apply drive side cable rule. Unknown or 80 pin cables reported
-	 * host side are checked drive side as well. Cases where we know a
-	 * 40wire cable is used safely for 80 are not checked here.
-	 */
-        if (ata_drive_40wire(dev->id) && (ap->cbl == ATA_CBL_PATA_UNK || ap->cbl == ATA_CBL_PATA80))
-		xfer_mask &= ~(0xF8 << ATA_SHIFT_UDMA);
-
-
+	/* drive modes available */
 	xfer_mask &= ata_pack_xfermask(dev->pio_mask,
 				       dev->mwdma_mask, dev->udma_mask);
 	xfer_mask &= ata_id_xfermask(dev->id);
@@ -3482,8 +3793,30 @@ static void ata_dev_xfermask(struct ata_device *dev)
 			       "other device, disabling DMA\n");
 	}
 
+	if (ap->flags & ATA_FLAG_NO_IORDY)
+		xfer_mask &= ata_pio_mask_no_iordy(dev);
+
 	if (ap->ops->mode_filter)
-		xfer_mask = ap->ops->mode_filter(ap, dev, xfer_mask);
+		xfer_mask = ap->ops->mode_filter(dev, xfer_mask);
+
+	/* Apply cable rule here.  Don't apply it early because when
+	 * we handle hot plug the cable type can itself change.
+	 * Check this last so that we know if the transfer rate was
+	 * solely limited by the cable.
+	 * Unknown or 80 wire cables reported host side are checked
+	 * drive side as well. Cases where we know a 40wire cable
+	 * is used safely for 80 are not checked here.
+	 */
+	if (xfer_mask & (0xF8 << ATA_SHIFT_UDMA))
+		/* UDMA/44 or higher would be available */
+		if((ap->cbl == ATA_CBL_PATA40) ||
+   		    (ata_drive_40wire(dev->id) &&
+		     (ap->cbl == ATA_CBL_PATA_UNK ||
+                     ap->cbl == ATA_CBL_PATA80))) {
+		      	ata_dev_printk(dev, KERN_WARNING,
+				 "limited to UDMA/33 due to 40-wire cable\n");
+			xfer_mask &= ~(0xF8 << ATA_SHIFT_UDMA);
+		}
 
 	ata_unpack_xfermask(xfer_mask, &dev->pio_mask,
 			    &dev->mwdma_mask, &dev->udma_mask);
@@ -4022,10 +4355,10 @@ void ata_data_xfer_noirq(struct ata_device *adev, unsigned char *buf,
 
 
 /**
- *	ata_pio_sector - Transfer ATA_SECT_SIZE (512 bytes) of data.
+ *	ata_pio_sector - Transfer a sector of data.
  *	@qc: Command on going
  *
- *	Transfer ATA_SECT_SIZE of data from/to the ATA device.
+ *	Transfer qc->sect_size bytes of data from/to the ATA device.
  *
  *	LOCKING:
  *	Inherited from caller.
@@ -4040,7 +4373,7 @@ static void ata_pio_sector(struct ata_queued_cmd *qc)
 	unsigned int offset;
 	unsigned char *buf;
 
-	if (qc->curbytes == qc->nbytes - ATA_SECT_SIZE)
+	if (qc->curbytes == qc->nbytes - qc->sect_size)
 		ap->hsm_task_state = HSM_ST_LAST;
 
 	page = sg[qc->cursg].page;
@@ -4060,17 +4393,17 @@ static void ata_pio_sector(struct ata_queued_cmd *qc)
 		buf = kmap_atomic(page, KM_IRQ0);
 
 		/* do the actual data transfer */
-		ap->ops->data_xfer(qc->dev, buf + offset, ATA_SECT_SIZE, do_write);
+		ap->ops->data_xfer(qc->dev, buf + offset, qc->sect_size, do_write);
 
 		kunmap_atomic(buf, KM_IRQ0);
 		local_irq_restore(flags);
 	} else {
 		buf = page_address(page);
-		ap->ops->data_xfer(qc->dev, buf + offset, ATA_SECT_SIZE, do_write);
+		ap->ops->data_xfer(qc->dev, buf + offset, qc->sect_size, do_write);
 	}
 
-	qc->curbytes += ATA_SECT_SIZE;
-	qc->cursg_ofs += ATA_SECT_SIZE;
+	qc->curbytes += qc->sect_size;
+	qc->cursg_ofs += qc->sect_size;
 
 	if (qc->cursg_ofs == (&sg[qc->cursg])->length) {
 		qc->cursg++;
@@ -4079,10 +4412,10 @@ static void ata_pio_sector(struct ata_queued_cmd *qc)
 }
 
 /**
- *	ata_pio_sectors - Transfer one or many 512-byte sectors.
+ *	ata_pio_sectors - Transfer one or many sectors.
  *	@qc: Command on going
  *
- *	Transfer one or many ATA_SECT_SIZE of data from/to the
+ *	Transfer one or many sectors of data from/to the
  *	ATA device for the DRQ request.
  *
  *	LOCKING:
@@ -4097,7 +4430,7 @@ static void ata_pio_sectors(struct ata_queued_cmd *qc)
 
 		WARN_ON(qc->dev->multi_count == 0);
 
-		nsect = min((qc->nbytes - qc->curbytes) / ATA_SECT_SIZE,
+		nsect = min((qc->nbytes - qc->curbytes) / qc->sect_size,
 			    qc->dev->multi_count);
 		while (nsect--)
 			ata_pio_sector(qc);
@@ -5577,42 +5910,35 @@ void ata_dev_init(struct ata_device *dev)
 }
 
 /**
- *	ata_port_init - Initialize an ata_port structure
- *	@ap: Structure to initialize
- *	@host: Collection of hosts to which @ap belongs
- *	@ent: Probe information provided by low-level driver
- *	@port_no: Port number associated with this ata_port
+ *	ata_port_alloc - allocate and initialize basic ATA port resources
+ *	@host: ATA host this allocated port belongs to
  *
- *	Initialize a new ata_port structure.
+ *	Allocate and initialize basic ATA port resources.
+ *
+ *	RETURNS:
+ *	Allocate ATA port on success, NULL on failure.
  *
  *	LOCKING:
- *	Inherited from caller.
+ *	Inherited from calling layer (may sleep).
  */
-void ata_port_init(struct ata_port *ap, struct ata_host *host,
-		   const struct ata_probe_ent *ent, unsigned int port_no)
+struct ata_port *ata_port_alloc(struct ata_host *host)
 {
+	struct ata_port *ap;
 	unsigned int i;
 
+	DPRINTK("ENTER\n");
+
+	ap = kzalloc(sizeof(*ap), GFP_KERNEL);
+	if (!ap)
+		return NULL;
+
 	ap->lock = &host->lock;
 	ap->flags = ATA_FLAG_DISABLED;
-	ap->print_id = ata_print_id++;
+	ap->print_id = -1;
 	ap->ctl = ATA_DEVCTL_OBS;
 	ap->host = host;
-	ap->dev = ent->dev;
-	ap->port_no = port_no;
-	if (port_no == 1 && ent->pinfo2) {
-		ap->pio_mask = ent->pinfo2->pio_mask;
-		ap->mwdma_mask = ent->pinfo2->mwdma_mask;
-		ap->udma_mask = ent->pinfo2->udma_mask;
-		ap->flags |= ent->pinfo2->flags;
-		ap->ops = ent->pinfo2->port_ops;
-	} else {
-		ap->pio_mask = ent->pio_mask;
-		ap->mwdma_mask = ent->mwdma_mask;
-		ap->udma_mask = ent->udma_mask;
-		ap->flags |= ent->port_flags;
-		ap->ops = ent->port_ops;
-	}
+	ap->dev = host->dev;
+
 	ap->hw_sata_spd_limit = UINT_MAX;
 	ap->active_tag = ATA_TAG_POISON;
 	ap->last_ctl = 0xFF;
@@ -5632,10 +5958,7 @@ void ata_port_init(struct ata_port *ap, struct ata_host *host,
 	INIT_LIST_HEAD(&ap->eh_done_q);
 	init_waitqueue_head(&ap->eh_wait_q);
 
-	/* set cable type */
 	ap->cbl = ATA_CBL_NONE;
-	if (ap->flags & ATA_FLAG_SATA)
-		ap->cbl = ATA_CBL_SATA;
 
 	for (i = 0; i < ATA_MAX_DEVICES; i++) {
 		struct ata_device *dev = &ap->device[i];
@@ -5648,100 +5971,209 @@ void ata_port_init(struct ata_port *ap, struct ata_host *host,
 	ap->stats.unhandled_irq = 1;
 	ap->stats.idle_irq = 1;
 #endif
+	return ap;
+}
 
-	memcpy(&ap->ioaddr, &ent->port[port_no], sizeof(struct ata_ioports));
+static void ata_host_release(struct device *gendev, void *res)
+{
+	struct ata_host *host = dev_get_drvdata(gendev);
+	int i;
+
+	for (i = 0; i < host->n_ports; i++) {
+		struct ata_port *ap = host->ports[i];
+
+		if (!ap)
+			continue;
+
+		if ((host->flags & ATA_HOST_STARTED) && ap->ops->port_stop)
+			ap->ops->port_stop(ap);
+	}
+
+	if ((host->flags & ATA_HOST_STARTED) && host->ops->host_stop)
+		host->ops->host_stop(host);
+
+	for (i = 0; i < host->n_ports; i++) {
+		struct ata_port *ap = host->ports[i];
+
+		if (!ap)
+			continue;
+
+		if (ap->scsi_host)
+			scsi_host_put(ap->scsi_host);
+
+		kfree(ap);
+		host->ports[i] = NULL;
+	}
+
+	dev_set_drvdata(gendev, NULL);
 }
 
 /**
- *	ata_port_init_shost - Initialize SCSI host associated with ATA port
- *	@ap: ATA port to initialize SCSI host for
- *	@shost: SCSI host associated with @ap
+ *	ata_host_alloc - allocate and init basic ATA host resources
+ *	@dev: generic device this host is associated with
+ *	@max_ports: maximum number of ATA ports associated with this host
  *
- *	Initialize SCSI host @shost associated with ATA port @ap.
+ *	Allocate and initialize basic ATA host resources.  LLD calls
+ *	this function to allocate a host, initializes it fully and
+ *	attaches it using ata_host_register().
+ *
+ *	@max_ports ports are allocated and host->n_ports is
+ *	initialized to @max_ports.  The caller is allowed to decrease
+ *	host->n_ports before calling ata_host_register().  The unused
+ *	ports will be automatically freed on registration.
+ *
+ *	RETURNS:
+ *	Allocate ATA host on success, NULL on failure.
  *
  *	LOCKING:
- *	Inherited from caller.
+ *	Inherited from calling layer (may sleep).
  */
-static void ata_port_init_shost(struct ata_port *ap, struct Scsi_Host *shost)
+struct ata_host *ata_host_alloc(struct device *dev, int max_ports)
 {
-	ap->scsi_host = shost;
+	struct ata_host *host;
+	size_t sz;
+	int i;
+
+	DPRINTK("ENTER\n");
+
+	if (!devres_open_group(dev, NULL, GFP_KERNEL))
+		return NULL;
+
+	/* alloc a container for our list of ATA ports (buses) */
+	sz = sizeof(struct ata_host) + (max_ports + 1) * sizeof(void *);
+	/* alloc a container for our list of ATA ports (buses) */
+	host = devres_alloc(ata_host_release, sz, GFP_KERNEL);
+	if (!host)
+		goto err_out;
+
+	devres_add(dev, host);
+	dev_set_drvdata(dev, host);
 
-	shost->unique_id = ap->print_id;
-	shost->max_id = 16;
-	shost->max_lun = 1;
-	shost->max_channel = 1;
-	shost->max_cmd_len = 12;
+	spin_lock_init(&host->lock);
+	host->dev = dev;
+	host->n_ports = max_ports;
+
+	/* allocate ports bound to this host */
+	for (i = 0; i < max_ports; i++) {
+		struct ata_port *ap;
+
+		ap = ata_port_alloc(host);
+		if (!ap)
+			goto err_out;
+
+		ap->port_no = i;
+		host->ports[i] = ap;
+	}
+
+	devres_remove_group(dev, NULL);
+	return host;
+
+ err_out:
+	devres_release_group(dev, NULL);
+	return NULL;
 }
 
 /**
- *	ata_port_add - Attach low-level ATA driver to system
- *	@ent: Information provided by low-level driver
- *	@host: Collections of ports to which we add
- *	@port_no: Port number associated with this host
+ *	ata_host_alloc_pinfo - alloc host and init with port_info array
+ *	@dev: generic device this host is associated with
+ *	@ppi: array of ATA port_info to initialize host with
+ *	@n_ports: number of ATA ports attached to this host
  *
- *	Attach low-level ATA driver to system.
- *
- *	LOCKING:
- *	PCI/etc. bus probe sem.
+ *	Allocate ATA host and initialize with info from @ppi.  If NULL
+ *	terminated, @ppi may contain fewer entries than @n_ports.  The
+ *	last entry will be used for the remaining ports.
  *
  *	RETURNS:
- *	New ata_port on success, for NULL on error.
+ *	Allocate ATA host on success, NULL on failure.
+ *
+ *	LOCKING:
+ *	Inherited from calling layer (may sleep).
  */
-static struct ata_port * ata_port_add(const struct ata_probe_ent *ent,
-				      struct ata_host *host,
-				      unsigned int port_no)
+struct ata_host *ata_host_alloc_pinfo(struct device *dev,
+				      const struct ata_port_info * const * ppi,
+				      int n_ports)
 {
-	struct Scsi_Host *shost;
-	struct ata_port *ap;
-
-	DPRINTK("ENTER\n");
+	const struct ata_port_info *pi;
+	struct ata_host *host;
+	int i, j;
 
-	if (!ent->port_ops->error_handler &&
-	    !(ent->port_flags & (ATA_FLAG_SATA_RESET | ATA_FLAG_SRST))) {
-		printk(KERN_ERR "ata%u: no reset mechanism available\n",
-		       port_no);
+	host = ata_host_alloc(dev, n_ports);
+	if (!host)
 		return NULL;
-	}
 
-	shost = scsi_host_alloc(ent->sht, sizeof(struct ata_port));
-	if (!shost)
-		return NULL;
+	for (i = 0, j = 0, pi = NULL; i < host->n_ports; i++) {
+		struct ata_port *ap = host->ports[i];
 
-	shost->transportt = &ata_scsi_transport_template;
+		if (ppi[j])
+			pi = ppi[j++];
 
-	ap = ata_shost_to_port(shost);
+		ap->pio_mask = pi->pio_mask;
+		ap->mwdma_mask = pi->mwdma_mask;
+		ap->udma_mask = pi->udma_mask;
+		ap->flags |= pi->flags;
+		ap->ops = pi->port_ops;
 
-	ata_port_init(ap, host, ent, port_no);
-	ata_port_init_shost(ap, shost);
+		if (!host->ops && (pi->port_ops != &ata_dummy_port_ops))
+			host->ops = pi->port_ops;
+		if (!host->private_data && pi->private_data)
+			host->private_data = pi->private_data;
+	}
 
-	return ap;
+	return host;
 }
 
-static void ata_host_release(struct device *gendev, void *res)
+/**
+ *	ata_host_start - start and freeze ports of an ATA host
+ *	@host: ATA host to start ports for
+ *
+ *	Start and then freeze ports of @host.  Started status is
+ *	recorded in host->flags, so this function can be called
+ *	multiple times.  Ports are guaranteed to get started only
+ *	once.  If host->ops isn't initialized yet, its set to the
+ *	first non-dummy port ops.
+ *
+ *	LOCKING:
+ *	Inherited from calling layer (may sleep).
+ *
+ *	RETURNS:
+ *	0 if all ports are started successfully, -errno otherwise.
+ */
+int ata_host_start(struct ata_host *host)
 {
-	struct ata_host *host = dev_get_drvdata(gendev);
-	int i;
+	int i, rc;
+
+	if (host->flags & ATA_HOST_STARTED)
+		return 0;
 
 	for (i = 0; i < host->n_ports; i++) {
 		struct ata_port *ap = host->ports[i];
 
-		if (ap && ap->ops->port_stop)
-			ap->ops->port_stop(ap);
+		if (!host->ops && !ata_port_is_dummy(ap))
+			host->ops = ap->ops;
+
+		if (ap->ops->port_start) {
+			rc = ap->ops->port_start(ap);
+			if (rc) {
+				ata_port_printk(ap, KERN_ERR, "failed to "
+						"start port (errno=%d)\n", rc);
+				goto err_out;
+			}
+		}
+
+		ata_eh_freeze_port(ap);
 	}
 
-	if (host->ops->host_stop)
-		host->ops->host_stop(host);
+	host->flags |= ATA_HOST_STARTED;
+	return 0;
 
-	for (i = 0; i < host->n_ports; i++) {
+ err_out:
+	while (--i >= 0) {
 		struct ata_port *ap = host->ports[i];
 
-		if (ap)
-			scsi_host_put(ap->scsi_host);
-
-		host->ports[i] = NULL;
+		if (ap->ops->port_stop)
+			ap->ops->port_stop(ap);
 	}
-
-	dev_set_drvdata(gendev, NULL);
+	return rc;
 }
 
 /**
@@ -5755,7 +6187,7 @@ static void ata_host_release(struct device *gendev, void *res)
  *	PCI/etc. bus probe sem.
  *
  */
-
+/* KILLME - the only user left is ipr */
 void ata_host_init(struct ata_host *host, struct device *dev,
 		   unsigned long flags, const struct ata_port_operations *ops)
 {
@@ -5766,155 +6198,95 @@ void ata_host_init(struct ata_host *host, struct device *dev,
 }
 
 /**
- *	ata_device_add - Register hardware device with ATA and SCSI layers
- *	@ent: Probe information describing hardware device to be registered
+ *	ata_host_register - register initialized ATA host
+ *	@host: ATA host to register
+ *	@sht: template for SCSI host
  *
- *	This function processes the information provided in the probe
- *	information struct @ent, allocates the necessary ATA and SCSI
- *	host information structures, initializes them, and registers
- *	everything with requisite kernel subsystems.
- *
- *	This function requests irqs, probes the ATA bus, and probes
- *	the SCSI bus.
+ *	Register initialized ATA host.  @host is allocated using
+ *	ata_host_alloc() and fully initialized by LLD.  This function
+ *	starts ports, registers @host with ATA and SCSI layers and
+ *	probe registered devices.
  *
  *	LOCKING:
- *	PCI/etc. bus probe sem.
+ *	Inherited from calling layer (may sleep).
  *
  *	RETURNS:
- *	Number of ports registered.  Zero on error (no ports registered).
+ *	0 on success, -errno otherwise.
  */
-int ata_device_add(const struct ata_probe_ent *ent)
+int ata_host_register(struct ata_host *host, struct scsi_host_template *sht)
 {
-	unsigned int i;
-	struct device *dev = ent->dev;
-	struct ata_host *host;
-	int rc;
-
-	DPRINTK("ENTER\n");
+	int i, rc;
 
-	if (ent->irq == 0) {
-		dev_printk(KERN_ERR, dev, "is not available: No interrupt assigned.\n");
-		return 0;
+	/* host must have been started */
+	if (!(host->flags & ATA_HOST_STARTED)) {
+		dev_printk(KERN_ERR, host->dev,
+			   "BUG: trying to register unstarted host\n");
+		WARN_ON(1);
+		return -EINVAL;
 	}
 
-	if (!devres_open_group(dev, ata_device_add, GFP_KERNEL))
-		return 0;
+	/* Blow away unused ports.  This happens when LLD can't
+	 * determine the exact number of ports to allocate at
+	 * allocation time.
+	 */
+	for (i = host->n_ports; host->ports[i]; i++)
+		kfree(host->ports[i]);
 
-	/* alloc a container for our list of ATA ports (buses) */
-	host = devres_alloc(ata_host_release, sizeof(struct ata_host) +
-			    (ent->n_ports * sizeof(void *)), GFP_KERNEL);
-	if (!host)
-		goto err_out;
-	devres_add(dev, host);
-	dev_set_drvdata(dev, host);
+	/* give ports names and add SCSI hosts */
+	for (i = 0; i < host->n_ports; i++)
+		host->ports[i]->print_id = ata_print_id++;
 
-	ata_host_init(host, dev, ent->_host_flags, ent->port_ops);
-	host->n_ports = ent->n_ports;
-	host->irq = ent->irq;
-	host->irq2 = ent->irq2;
-	host->iomap = ent->iomap;
-	host->private_data = ent->private_data;
+	rc = ata_scsi_add_hosts(host, sht);
+	if (rc)
+		return rc;
 
-	/* register each port bound to this device */
+	/* set cable, sata_spd_limit and report */
 	for (i = 0; i < host->n_ports; i++) {
-		struct ata_port *ap;
-		unsigned long xfer_mode_mask;
-		int irq_line = ent->irq;
+		struct ata_port *ap = host->ports[i];
+		int irq_line;
+		u32 scontrol;
+		unsigned long xfer_mask;
 
-		ap = ata_port_add(ent, host, i);
-		host->ports[i] = ap;
-		if (!ap)
-			goto err_out;
+		/* set SATA cable type if still unset */
+		if (ap->cbl == ATA_CBL_NONE && (ap->flags & ATA_FLAG_SATA))
+			ap->cbl = ATA_CBL_SATA;
 
-		/* dummy? */
-		if (ent->dummy_port_mask & (1 << i)) {
-			ata_port_printk(ap, KERN_INFO, "DUMMY\n");
-			ap->ops = &ata_dummy_port_ops;
-			continue;
-		}
-
-		/* start port */
-		rc = ap->ops->port_start(ap);
-		if (rc) {
-			host->ports[i] = NULL;
-			scsi_host_put(ap->scsi_host);
-			goto err_out;
+		/* init sata_spd_limit to the current value */
+		if (sata_scr_read(ap, SCR_CONTROL, &scontrol) == 0) {
+			int spd = (scontrol >> 4) & 0xf;
+			ap->hw_sata_spd_limit &= (1 << spd) - 1;
 		}
+		ap->sata_spd_limit = ap->hw_sata_spd_limit;
 
-		/* Report the secondary IRQ for second channel legacy */
-		if (i == 1 && ent->irq2)
-			irq_line = ent->irq2;
+		/* report the secondary IRQ for second channel legacy */
+		irq_line = host->irq;
+		if (i == 1 && host->irq2)
+			irq_line = host->irq2;
 
-		xfer_mode_mask =(ap->udma_mask << ATA_SHIFT_UDMA) |
-				(ap->mwdma_mask << ATA_SHIFT_MWDMA) |
-				(ap->pio_mask << ATA_SHIFT_PIO);
+		xfer_mask = ata_pack_xfermask(ap->pio_mask, ap->mwdma_mask,
+					      ap->udma_mask);
 
 		/* print per-port info to dmesg */
-		ata_port_printk(ap, KERN_INFO, "%cATA max %s cmd 0x%p "
-				"ctl 0x%p bmdma 0x%p irq %d\n",
-				ap->flags & ATA_FLAG_SATA ? 'S' : 'P',
-				ata_mode_string(xfer_mode_mask),
-				ap->ioaddr.cmd_addr,
-				ap->ioaddr.ctl_addr,
-				ap->ioaddr.bmdma_addr,
-				irq_line);
-
-		/* freeze port before requesting IRQ */
-		ata_eh_freeze_port(ap);
-	}
-
-	/* obtain irq, that may be shared between channels */
-	rc = devm_request_irq(dev, ent->irq, ent->port_ops->irq_handler,
-			      ent->irq_flags, DRV_NAME, host);
-	if (rc) {
-		dev_printk(KERN_ERR, dev, "irq %lu request failed: %d\n",
-			   ent->irq, rc);
-		goto err_out;
-	}
-
-	/* do we have a second IRQ for the other channel, eg legacy mode */
-	if (ent->irq2) {
-		/* We will get weird core code crashes later if this is true
-		   so trap it now */
-		BUG_ON(ent->irq == ent->irq2);
-
-		rc = devm_request_irq(dev, ent->irq2,
-				ent->port_ops->irq_handler, ent->irq_flags,
-				DRV_NAME, host);
-		if (rc) {
-			dev_printk(KERN_ERR, dev, "irq %lu request failed: %d\n",
-				   ent->irq2, rc);
-			goto err_out;
-		}
+		if (!ata_port_is_dummy(ap))
+			ata_port_printk(ap, KERN_INFO, "%cATA max %s cmd 0x%p "
+					"ctl 0x%p bmdma 0x%p irq %d\n",
+					ap->cbl == ATA_CBL_SATA ? 'S' : 'P',
+					ata_mode_string(xfer_mask),
+					ap->ioaddr.cmd_addr,
+					ap->ioaddr.ctl_addr,
+					ap->ioaddr.bmdma_addr,
+					irq_line);
+		else
+			ata_port_printk(ap, KERN_INFO, "DUMMY\n");
 	}
 
-	/* resource acquisition complete */
-	devres_remove_group(dev, ata_device_add);
-
 	/* perform each probe synchronously */
 	DPRINTK("probe begin\n");
 	for (i = 0; i < host->n_ports; i++) {
 		struct ata_port *ap = host->ports[i];
-		u32 scontrol;
 		int rc;
 
-		/* init sata_spd_limit to the current value */
-		if (sata_scr_read(ap, SCR_CONTROL, &scontrol) == 0) {
-			int spd = (scontrol >> 4) & 0xf;
-			ap->hw_sata_spd_limit &= (1 << spd) - 1;
-		}
-		ap->sata_spd_limit = ap->hw_sata_spd_limit;
-
-		rc = scsi_add_host(ap->scsi_host, dev);
-		if (rc) {
-			ata_port_printk(ap, KERN_ERR, "scsi_add_host failed\n");
-			/* FIXME: do something useful here */
-			/* FIXME: handle unconditional calls to
-			 * scsi_scan_host and ata_host_remove, below,
-			 * at the very least
-			 */
-		}
-
+		/* probe */
 		if (ap->ops->error_handler) {
 			struct ata_eh_info *ehi = &ap->eh_info;
 			unsigned long flags;
@@ -5959,16 +6331,52 @@ int ata_device_add(const struct ata_probe_ent *ent)
 		ata_scsi_scan_host(ap);
 	}
 
-	VPRINTK("EXIT, returning %u\n", ent->n_ports);
-	return ent->n_ports; /* success */
-
- err_out:
-	devres_release_group(dev, ata_device_add);
-	VPRINTK("EXIT, returning %d\n", rc);
 	return 0;
 }
 
 /**
+ *	ata_host_activate - start host, request IRQ and register it
+ *	@host: target ATA host
+ *	@irq: IRQ to request
+ *	@irq_handler: irq_handler used when requesting IRQ
+ *	@irq_flags: irq_flags used when requesting IRQ
+ *	@sht: scsi_host_template to use when registering the host
+ *
+ *	After allocating an ATA host and initializing it, most libata
+ *	LLDs perform three steps to activate the host - start host,
+ *	request IRQ and register it.  This helper takes necessasry
+ *	arguments and performs the three steps in one go.
+ *
+ *	LOCKING:
+ *	Inherited from calling layer (may sleep).
+ *
+ *	RETURNS:
+ *	0 on success, -errno otherwise.
+ */
+int ata_host_activate(struct ata_host *host, int irq,
+		      irq_handler_t irq_handler, unsigned long irq_flags,
+		      struct scsi_host_template *sht)
+{
+	int rc;
+
+	rc = ata_host_start(host);
+	if (rc)
+		return rc;
+
+	rc = devm_request_irq(host->dev, irq, irq_handler, irq_flags,
+			      dev_driver_string(host->dev), host);
+	if (rc)
+		return rc;
+
+	rc = ata_host_register(host, sht);
+	/* if failed, just free the IRQ and leave ports alone */
+	if (rc)
+		devm_free_irq(host->dev, irq, host);
+
+	return rc;
+}
+
+/**
  *	ata_port_detach - Detach ATA port in prepration of device removal
  *	@ap: ATA port to be detached
  *
@@ -6043,32 +6451,6 @@ void ata_host_detach(struct ata_host *host)
 		ata_port_detach(host->ports[i]);
 }
 
-struct ata_probe_ent *
-ata_probe_ent_alloc(struct device *dev, const struct ata_port_info *port)
-{
-	struct ata_probe_ent *probe_ent;
-
-	probe_ent = devm_kzalloc(dev, sizeof(*probe_ent), GFP_KERNEL);
-	if (!probe_ent) {
-		printk(KERN_ERR DRV_NAME "(%s): out of memory\n",
-		       kobject_name(&(dev->kobj)));
-		return NULL;
-	}
-
-	INIT_LIST_HEAD(&probe_ent->node);
-	probe_ent->dev = dev;
-
-	probe_ent->sht = port->sht;
-	probe_ent->port_flags = port->flags;
-	probe_ent->pio_mask = port->pio_mask;
-	probe_ent->mwdma_mask = port->mwdma_mask;
-	probe_ent->udma_mask = port->udma_mask;
-	probe_ent->port_ops = port->port_ops;
-	probe_ent->private_data = port->private_data;
-
-	return probe_ent;
-}
-
 /**
  *	ata_std_ports - initialize ioaddr with standard port offsets.
  *	@ioaddr: IO address structure to be initialized
@@ -6334,6 +6716,10 @@ const struct ata_port_operations ata_dummy_port_ops = {
 	.port_stop		= ata_dummy_noret,
 };
 
+const struct ata_port_info ata_dummy_port_info = {
+	.port_ops		= &ata_dummy_port_ops,
+};
+
 /*
  * libata is essentially a library of internal helper functions for
  * low-level ATA host controller drivers.  As such, the API/ABI is
@@ -6345,10 +6731,15 @@ EXPORT_SYMBOL_GPL(sata_deb_timing_normal);
 EXPORT_SYMBOL_GPL(sata_deb_timing_hotplug);
 EXPORT_SYMBOL_GPL(sata_deb_timing_long);
 EXPORT_SYMBOL_GPL(ata_dummy_port_ops);
+EXPORT_SYMBOL_GPL(ata_dummy_port_info);
 EXPORT_SYMBOL_GPL(ata_std_bios_param);
 EXPORT_SYMBOL_GPL(ata_std_ports);
 EXPORT_SYMBOL_GPL(ata_host_init);
-EXPORT_SYMBOL_GPL(ata_device_add);
+EXPORT_SYMBOL_GPL(ata_host_alloc);
+EXPORT_SYMBOL_GPL(ata_host_alloc_pinfo);
+EXPORT_SYMBOL_GPL(ata_host_start);
+EXPORT_SYMBOL_GPL(ata_host_register);
+EXPORT_SYMBOL_GPL(ata_host_activate);
 EXPORT_SYMBOL_GPL(ata_host_detach);
 EXPORT_SYMBOL_GPL(ata_sg_init);
 EXPORT_SYMBOL_GPL(ata_sg_init_one);
@@ -6360,6 +6751,7 @@ EXPORT_SYMBOL_GPL(ata_tf_load);
 EXPORT_SYMBOL_GPL(ata_tf_read);
 EXPORT_SYMBOL_GPL(ata_noop_dev_select);
 EXPORT_SYMBOL_GPL(ata_std_dev_select);
+EXPORT_SYMBOL_GPL(sata_print_link_status);
 EXPORT_SYMBOL_GPL(ata_tf_to_fis);
 EXPORT_SYMBOL_GPL(ata_tf_from_fis);
 EXPORT_SYMBOL_GPL(ata_check_status);
@@ -6367,6 +6759,7 @@ EXPORT_SYMBOL_GPL(ata_altstatus);
 EXPORT_SYMBOL_GPL(ata_exec_command);
 EXPORT_SYMBOL_GPL(ata_port_start);
 EXPORT_SYMBOL_GPL(ata_interrupt);
+EXPORT_SYMBOL_GPL(ata_do_set_mode);
 EXPORT_SYMBOL_GPL(ata_data_xfer);
 EXPORT_SYMBOL_GPL(ata_data_xfer_noirq);
 EXPORT_SYMBOL_GPL(ata_qc_prep);
@@ -6429,7 +6822,8 @@ EXPORT_SYMBOL_GPL(ata_timing_merge);
 
 #ifdef CONFIG_PCI
 EXPORT_SYMBOL_GPL(pci_test_config_bits);
-EXPORT_SYMBOL_GPL(ata_pci_init_native_mode);
+EXPORT_SYMBOL_GPL(ata_pci_init_native_host);
+EXPORT_SYMBOL_GPL(ata_pci_prepare_native_host);
 EXPORT_SYMBOL_GPL(ata_pci_init_one);
 EXPORT_SYMBOL_GPL(ata_pci_remove_one);
 #ifdef CONFIG_PM
@@ -6461,3 +6855,8 @@ EXPORT_SYMBOL_GPL(ata_dummy_irq_on);
 EXPORT_SYMBOL_GPL(ata_irq_ack);
 EXPORT_SYMBOL_GPL(ata_dummy_irq_ack);
 EXPORT_SYMBOL_GPL(ata_dev_try_classify);
+
+EXPORT_SYMBOL_GPL(ata_cable_40wire);
+EXPORT_SYMBOL_GPL(ata_cable_80wire);
+EXPORT_SYMBOL_GPL(ata_cable_unknown);
+EXPORT_SYMBOL_GPL(ata_cable_sata);
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 39f556c..2bff9ad 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -1056,7 +1056,7 @@ static void ata_eh_analyze_serror(struct ata_port *ap)
 	}
 	if (serror & SERR_INTERNAL) {
 		err_mask |= AC_ERR_SYSTEM;
-		action |= ATA_EH_SOFTRESET;
+		action |= ATA_EH_HARDRESET;
 	}
 	if (serror & (SERR_PHYRDY_CHG | SERR_DEV_XCHG))
 		ata_ehi_hotplugged(&ehc->i);
@@ -1151,7 +1151,9 @@ static unsigned int ata_eh_analyze_tf(struct ata_queued_cmd *qc,
 		return ATA_EH_SOFTRESET;
 	}
 
-	if (!(qc->err_mask & AC_ERR_DEV))
+	if (stat & (ATA_ERR | ATA_DF))
+		qc->err_mask |= AC_ERR_DEV;
+	else
 		return 0;
 
 	switch (qc->dev->class) {
@@ -1669,7 +1671,10 @@ static int ata_eh_reset(struct ata_port *ap, int classify,
 				reset == softreset ? "soft" : "hard");
 
 	/* mark that this EH session started with reset */
-	ehc->i.flags |= ATA_EHI_DID_RESET;
+	if (reset == hardreset)
+		ehc->i.flags |= ATA_EHI_DID_HARDRESET;
+	else
+		ehc->i.flags |= ATA_EHI_DID_SOFTRESET;
 
 	rc = ata_do_reset(ap, reset, classes);
 
@@ -1808,6 +1813,10 @@ static int ata_eh_revalidate_and_attach(struct ata_port *ap,
 		}
 	}
 
+	/* PDIAG- should have been released, ask cable type if post-reset */
+	if ((ehc->i.flags & ATA_EHI_DID_RESET) && ap->ops->cable_detect)
+		ap->cbl = ap->ops->cable_detect(ap);
+
 	/* Configure new devices forward such that user doesn't see
 	 * device detection messages backwards.
 	 */
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index e936443..9afba2b 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -104,7 +104,7 @@ static const u8 def_control_mpage[CONTROL_MPAGE_LEN] = {
  * libata transport template.  libata doesn't do real transport stuff.
  * It just needs the eh_timed_out hook.
  */
-struct scsi_transport_template ata_scsi_transport_template = {
+static struct scsi_transport_template ata_scsi_transport_template = {
 	.eh_strategy_handler	= ata_scsi_error,
 	.eh_timed_out		= ata_scsi_timed_out,
 	.user_scan		= ata_scsi_user_scan,
@@ -2678,6 +2678,18 @@ static unsigned int ata_scsi_pass_thru(struct ata_queued_cmd *qc)
 		tf->device = qc->dev->devno ?
 			tf->device | ATA_DEV1 : tf->device & ~ATA_DEV1;
 
+	/* READ/WRITE LONG use a non-standard sect_size */
+	qc->sect_size = ATA_SECT_SIZE;
+	switch (tf->command) {
+	case ATA_CMD_READ_LONG:
+	case ATA_CMD_READ_LONG_ONCE:
+	case ATA_CMD_WRITE_LONG:
+	case ATA_CMD_WRITE_LONG_ONCE:
+		if (tf->protocol != ATA_PROT_PIO || tf->nsect != 1)
+			goto invalid_fld;
+		qc->sect_size = scmd->request_bufflen;
+	}
+
 	/*
 	 * Filter SET_FEATURES - XFER MODE command -- otherwise,
 	 * SET_FEATURES - XFER MODE must be preceded/succeeded
@@ -2792,8 +2804,9 @@ static inline int __ata_scsi_queuecmd(struct scsi_cmnd *scmd,
 {
 	int rc = 0;
 
-	if (unlikely(!scmd->cmd_len)) {
-		ata_dev_printk(dev, KERN_WARNING, "WARNING: zero len CDB\n");
+	if (unlikely(!scmd->cmd_len || scmd->cmd_len > dev->cdb_len)) {
+		DPRINTK("bad CDB len=%u, max=%u\n",
+			scmd->cmd_len, dev->cdb_len);
 		scmd->result = DID_ERROR << 16;
 		done(scmd);
 		return 0;
@@ -2948,6 +2961,48 @@ void ata_scsi_simulate(struct ata_device *dev, struct scsi_cmnd *cmd,
 	}
 }
 
+int ata_scsi_add_hosts(struct ata_host *host, struct scsi_host_template *sht)
+{
+	int i, rc;
+
+	for (i = 0; i < host->n_ports; i++) {
+		struct ata_port *ap = host->ports[i];
+		struct Scsi_Host *shost;
+
+		rc = -ENOMEM;
+		shost = scsi_host_alloc(sht, sizeof(struct ata_port *));
+		if (!shost)
+			goto err_alloc;
+
+		*(struct ata_port **)&shost->hostdata[0] = ap;
+		ap->scsi_host = shost;
+
+		shost->transportt = &ata_scsi_transport_template;
+		shost->unique_id = ap->print_id;
+		shost->max_id = 16;
+		shost->max_lun = 1;
+		shost->max_channel = 1;
+		shost->max_cmd_len = 16;
+
+		rc = scsi_add_host(ap->scsi_host, ap->host->dev);
+		if (rc)
+			goto err_add;
+	}
+
+	return 0;
+
+ err_add:
+	scsi_host_put(host->ports[i]->scsi_host);
+ err_alloc:
+	while (--i >= 0) {
+		struct Scsi_Host *shost = host->ports[i]->scsi_host;
+
+		scsi_remove_host(shost);
+		scsi_host_put(shost);
+	}
+	return rc;
+}
+
 void ata_scsi_scan_host(struct ata_port *ap)
 {
 	unsigned int i;
@@ -3224,21 +3279,21 @@ struct ata_port *ata_sas_port_alloc(struct ata_host *host,
 				    struct ata_port_info *port_info,
 				    struct Scsi_Host *shost)
 {
-	struct ata_port *ap = kzalloc(sizeof(*ap), GFP_KERNEL);
-	struct ata_probe_ent *ent;
+	struct ata_port *ap;
 
+	ap = ata_port_alloc(host);
 	if (!ap)
 		return NULL;
 
-	ent = ata_probe_ent_alloc(host->dev, port_info);
-	if (!ent) {
-		kfree(ap);
-		return NULL;
-	}
-
-	ata_port_init(ap, host, ent, 0);
+	ap->port_no = 0;
 	ap->lock = shost->host_lock;
-	devm_kfree(host->dev, ent);
+	ap->pio_mask = port_info->pio_mask;
+	ap->mwdma_mask = port_info->mwdma_mask;
+	ap->udma_mask = port_info->udma_mask;
+	ap->flags |= port_info->flags;
+	ap->ops = port_info->port_ops;
+	ap->cbl = ATA_CBL_SATA;
+
 	return ap;
 }
 EXPORT_SYMBOL_GPL(ata_sas_port_alloc);
@@ -3294,8 +3349,10 @@ int ata_sas_port_init(struct ata_port *ap)
 {
 	int rc = ap->ops->port_start(ap);
 
-	if (!rc)
+	if (!rc) {
+		ap->print_id = ata_print_id++;
 		rc = ata_bus_probe(ap);
+	}
 
 	return rc;
 }
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 2ffcca0..8af18ad 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -526,168 +526,399 @@ static int ata_resources_present(struct pci_dev *pdev, int port)
 	port = port * 2;
 	for (i = 0; i < 2; i ++) {
 		if (pci_resource_start(pdev, port + i) == 0 ||
-			pci_resource_len(pdev, port + i) == 0)
-		return 0;
+		    pci_resource_len(pdev, port + i) == 0)
+			return 0;
 	}
 	return 1;
 }
 
 /**
- *	ata_pci_init_native_mode - Initialize native-mode driver
- *	@pdev:  pci device to be initialized
- *	@port:  array[2] of pointers to port info structures.
- *	@ports: bitmap of ports present
- *
- *	Utility function which allocates and initializes an
- *	ata_probe_ent structure for a standard dual-port
- *	PIO-based IDE controller.  The returned ata_probe_ent
- *	structure can be passed to ata_device_add().  The returned
- *	ata_probe_ent structure should then be freed with kfree().
- *
- *	The caller need only pass the address of the primary port, the
- *	secondary will be deduced automatically. If the device has non
- *	standard secondary port mappings this function can be called twice,
- *	once for each interface.
+ *	ata_pci_init_bmdma - acquire PCI BMDMA resources and init ATA host
+ *	@host: target ATA host
+ *
+ *	Acquire PCI BMDMA resources and initialize @host accordingly.
+ *
+ *	LOCKING:
+ *	Inherited from calling layer (may sleep).
+ *
+ *	RETURNS:
+ *	0 on success, -errno otherwise.
  */
+static int ata_pci_init_bmdma(struct ata_host *host)
+{
+	struct device *gdev = host->dev;
+	struct pci_dev *pdev = to_pci_dev(gdev);
+	int i, rc;
+
+	/* TODO: If we get no DMA mask we should fall back to PIO */
+	rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
+	if (rc)
+		return rc;
+	rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
+	if (rc)
+		return rc;
+
+	/* request and iomap DMA region */
+	rc = pcim_iomap_regions(pdev, 1 << 4, DRV_NAME);
+	if (rc) {
+		dev_printk(KERN_ERR, gdev, "failed to request/iomap BAR4\n");
+		return -ENOMEM;
+	}
+	host->iomap = pcim_iomap_table(pdev);
+
+	for (i = 0; i < 2; i++) {
+		struct ata_port *ap = host->ports[i];
+		void __iomem *bmdma = host->iomap[4] + 8 * i;
+
+		if (ata_port_is_dummy(ap))
+			continue;
+
+		ap->ioaddr.bmdma_addr = bmdma;
+		if ((!(ap->flags & ATA_FLAG_IGN_SIMPLEX)) &&
+		    (ioread8(bmdma + 2) & 0x80))
+			host->flags |= ATA_HOST_SIMPLEX;
+	}
+
+	return 0;
+}
 
-struct ata_probe_ent *
-ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port, int ports)
+/**
+ *	ata_pci_init_native_host - acquire native ATA resources and init host
+ *	@host: target ATA host
+ *	@port_mask: ports to consider
+ *
+ *	Acquire native PCI ATA resources for @host and initialize
+ *	@host accordoingly.
+ *
+ *	LOCKING:
+ *	Inherited from calling layer (may sleep).
+ *
+ *	RETURNS:
+ *	0 on success, -errno otherwise.
+ */
+int ata_pci_init_native_host(struct ata_host *host, unsigned int port_mask)
 {
-	struct ata_probe_ent *probe_ent;
-	int i, p = 0;
-	void __iomem * const *iomap;
-
-	/* iomap BARs */
-	for (i = 0; i < 4; i++) {
-		if (pcim_iomap(pdev, i, 0) == NULL) {
-			dev_printk(KERN_ERR, &pdev->dev,
-				   "failed to iomap PCI BAR %d\n", i);
-			return NULL;
+	struct device *gdev = host->dev;
+	struct pci_dev *pdev = to_pci_dev(gdev);
+	int i, rc;
+
+	/* Discard disabled ports.  Some controllers show their unused
+	 * channels this way.  Disabled ports are made dummy.
+	 */
+	for (i = 0; i < 2; i++) {
+		if ((port_mask & (1 << i)) && !ata_resources_present(pdev, i)) {
+			host->ports[i]->ops = &ata_dummy_port_ops;
+			port_mask &= ~(1 << i);
 		}
 	}
 
-	pcim_iomap(pdev, 4, 0); /* may fail */
-	iomap = pcim_iomap_table(pdev);
-
-	/* alloc and init probe_ent */
-	probe_ent = ata_probe_ent_alloc(pci_dev_to_dev(pdev), port[0]);
-	if (!probe_ent)
-		return NULL;
-
-	probe_ent->irq = pdev->irq;
-	probe_ent->irq_flags = IRQF_SHARED;
-
-	/* Discard disabled ports. Some controllers show their
-	   unused channels this way */
-	if (ata_resources_present(pdev, 0) == 0)
-		ports &= ~ATA_PORT_PRIMARY;
-	if (ata_resources_present(pdev, 1) == 0)
-		ports &= ~ATA_PORT_SECONDARY;
-
-	if (ports & ATA_PORT_PRIMARY) {
-		probe_ent->port[p].cmd_addr = iomap[0];
-		probe_ent->port[p].altstatus_addr =
-		probe_ent->port[p].ctl_addr = (void __iomem *)
-			((unsigned long)iomap[1] | ATA_PCI_CTL_OFS);
-		if (iomap[4]) {
-			if ((!(port[p]->flags & ATA_FLAG_IGN_SIMPLEX)) &&
-			    (ioread8(iomap[4] + 2) & 0x80))
-				probe_ent->_host_flags |= ATA_HOST_SIMPLEX;
-			probe_ent->port[p].bmdma_addr = iomap[4];
-		}
-		ata_std_ports(&probe_ent->port[p]);
-		p++;
+	if (!port_mask) {
+		dev_printk(KERN_ERR, gdev, "no available port\n");
+		return -ENODEV;
 	}
 
-	if (ports & ATA_PORT_SECONDARY) {
-		probe_ent->port[p].cmd_addr = iomap[2];
-		probe_ent->port[p].altstatus_addr =
-		probe_ent->port[p].ctl_addr = (void __iomem *)
-			((unsigned long)iomap[3] | ATA_PCI_CTL_OFS);
-		if (iomap[4]) {
-			if ((!(port[p]->flags & ATA_FLAG_IGN_SIMPLEX)) &&
-			    (ioread8(iomap[4] + 10) & 0x80))
-				probe_ent->_host_flags |= ATA_HOST_SIMPLEX;
-			probe_ent->port[p].bmdma_addr = iomap[4] + 8;
+	/* request, iomap BARs and init port addresses accordingly */
+	for (i = 0; i < 2; i++) {
+		struct ata_port *ap = host->ports[i];
+		int base = i * 2;
+		void __iomem * const *iomap;
+
+		if (!(port_mask & (1 << i)))
+			continue;
+
+		rc = pcim_iomap_regions(pdev, 0x3 << base, DRV_NAME);
+		if (rc) {
+			dev_printk(KERN_ERR, gdev, "failed to request/iomap "
+				   "BARs for port %d (errno=%d)\n", i, rc);
+			if (rc == -EBUSY)
+				pcim_pin_device(pdev);
+			return rc;
 		}
-		ata_std_ports(&probe_ent->port[p]);
-		probe_ent->pinfo2 = port[1];
-		p++;
+		host->iomap = iomap = pcim_iomap_table(pdev);
+
+		ap->ioaddr.cmd_addr = iomap[base];
+		ap->ioaddr.altstatus_addr =
+		ap->ioaddr.ctl_addr = (void __iomem *)
+			((unsigned long)iomap[base + 1] | ATA_PCI_CTL_OFS);
+		ata_std_ports(&ap->ioaddr);
 	}
 
-	probe_ent->n_ports = p;
-	return probe_ent;
+	return 0;
 }
 
-static struct ata_probe_ent *ata_pci_init_legacy_port(struct pci_dev *pdev,
-				struct ata_port_info **port, int port_mask)
+/**
+ *	ata_pci_prepare_native_host - helper to prepare native PCI ATA host
+ *	@pdev: target PCI device
+ *	@ppi: array of port_info
+ *	@n_ports: number of ports to allocate
+ *	@r_host: out argument for the initialized ATA host
+ *
+ *	Helper to allocate ATA host for @pdev, acquire all native PCI
+ *	resources and initialize it accordingly in one go.
+ *
+ *	LOCKING:
+ *	Inherited from calling layer (may sleep).
+ *
+ *	RETURNS:
+ *	0 on success, -errno otherwise.
+ */
+int ata_pci_prepare_native_host(struct pci_dev *pdev,
+				const struct ata_port_info * const * ppi,
+				int n_ports, struct ata_host **r_host)
+{
+	struct ata_host *host;
+	unsigned int port_mask;
+	int rc;
+
+	if (!devres_open_group(&pdev->dev, NULL, GFP_KERNEL))
+		return -ENOMEM;
+
+	host = ata_host_alloc_pinfo(&pdev->dev, ppi, 2);
+	if (!host) {
+		dev_printk(KERN_ERR, &pdev->dev,
+			   "failed to allocate ATA host\n");
+		rc = -ENOMEM;
+		goto err_out;
+	}
+
+	port_mask = ATA_PORT_PRIMARY;
+	if (n_ports > 1)
+		port_mask |= ATA_PORT_SECONDARY;
+
+	rc = ata_pci_init_native_host(host, port_mask);
+	if (rc)
+		goto err_out;
+
+	/* init DMA related stuff */
+	rc = ata_pci_init_bmdma(host);
+	if (rc)
+		goto err_bmdma;
+
+	devres_remove_group(&pdev->dev, NULL);
+	*r_host = host;
+	return 0;
+
+ err_bmdma:
+	/* This is necessary because PCI and iomap resources are
+	 * merged and releasing the top group won't release the
+	 * acquired resources if some of those have been acquired
+	 * before entering this function.
+	 */
+	pcim_iounmap_regions(pdev, 0xf);
+ err_out:
+	devres_release_group(&pdev->dev, NULL);
+	return rc;
+}
+
+struct ata_legacy_devres {
+	unsigned int	mask;
+	unsigned long	cmd_port[2];
+	void __iomem *	cmd_addr[2];
+	void __iomem *	ctl_addr[2];
+	unsigned int	irq[2];
+	void *		irq_dev_id[2];
+};
+
+static void ata_legacy_free_irqs(struct ata_legacy_devres *legacy_dr)
 {
-	struct ata_probe_ent *probe_ent;
-	void __iomem *iomap[5] = { }, *bmdma;
-
-	if (port_mask & ATA_PORT_PRIMARY) {
-		iomap[0] = devm_ioport_map(&pdev->dev, ATA_PRIMARY_CMD, 8);
-		iomap[1] = devm_ioport_map(&pdev->dev, ATA_PRIMARY_CTL, 1);
-		if (!iomap[0] || !iomap[1])
-			return NULL;
+	int i;
+
+	for (i = 0; i < 2; i++) {
+		if (!legacy_dr->irq[i])
+			continue;
+
+		free_irq(legacy_dr->irq[i], legacy_dr->irq_dev_id[i]);
+		legacy_dr->irq[i] = 0;
+		legacy_dr->irq_dev_id[i] = NULL;
 	}
+}
+
+static void ata_legacy_release(struct device *gdev, void *res)
+{
+	struct ata_legacy_devres *this = res;
+	int i;
 
-	if (port_mask & ATA_PORT_SECONDARY) {
-		iomap[2] = devm_ioport_map(&pdev->dev, ATA_SECONDARY_CMD, 8);
-		iomap[3] = devm_ioport_map(&pdev->dev, ATA_SECONDARY_CTL, 1);
-		if (!iomap[2] || !iomap[3])
-			return NULL;
+	ata_legacy_free_irqs(this);
+
+	for (i = 0; i < 2; i++) {
+		if (this->cmd_addr[i])
+			ioport_unmap(this->cmd_addr[i]);
+		if (this->ctl_addr[i])
+			ioport_unmap(this->ctl_addr[i]);
+		if (this->cmd_port[i])
+			release_region(this->cmd_port[i], 8);
 	}
+}
 
-	bmdma = pcim_iomap(pdev, 4, 16); /* may fail */
-
-	/* alloc and init probe_ent */
-	probe_ent = ata_probe_ent_alloc(pci_dev_to_dev(pdev), port[0]);
-	if (!probe_ent)
-		return NULL;
-
-	probe_ent->n_ports = 2;
-	probe_ent->irq_flags = IRQF_SHARED;
-
-	if (port_mask & ATA_PORT_PRIMARY) {
-		probe_ent->irq = ATA_PRIMARY_IRQ(pdev);
-		probe_ent->port[0].cmd_addr = iomap[0];
-		probe_ent->port[0].altstatus_addr =
-		probe_ent->port[0].ctl_addr = iomap[1];
-		if (bmdma) {
-			probe_ent->port[0].bmdma_addr = bmdma;
-			if ((!(port[0]->flags & ATA_FLAG_IGN_SIMPLEX)) &&
-			    (ioread8(bmdma + 2) & 0x80))
-				probe_ent->_host_flags |= ATA_HOST_SIMPLEX;
-		}
-		ata_std_ports(&probe_ent->port[0]);
-	} else
-		probe_ent->dummy_port_mask |= ATA_PORT_PRIMARY;
+static int ata_init_legacy_port(struct ata_port *ap,
+				struct ata_legacy_devres *legacy_dr)
+{
+	struct ata_host *host = ap->host;
+	int port_no = ap->port_no;
+	unsigned long cmd_port, ctl_port;
+
+	if (port_no == 0) {
+		cmd_port = ATA_PRIMARY_CMD;
+		ctl_port = ATA_PRIMARY_CTL;
+	} else {
+		cmd_port = ATA_SECONDARY_CMD;
+		ctl_port = ATA_SECONDARY_CTL;
+	}
 
-	if (port_mask & ATA_PORT_SECONDARY) {
-		if (probe_ent->irq)
-			probe_ent->irq2 = ATA_SECONDARY_IRQ(pdev);
+	/* request cmd_port */
+	if (request_region(cmd_port, 8, "libata"))
+		legacy_dr->cmd_port[port_no] = cmd_port;
+	else {
+		dev_printk(KERN_WARNING, host->dev,
+			   "0x%0lX IDE port busy\n", cmd_port);
+		return -EBUSY;
+	}
+
+	/* iomap cmd and ctl ports */
+	legacy_dr->cmd_addr[port_no] = ioport_map(cmd_port, 8);
+	legacy_dr->ctl_addr[port_no] = ioport_map(ctl_port, 1);
+	if (!legacy_dr->cmd_addr[port_no] || !legacy_dr->ctl_addr[port_no])
+		return -ENOMEM;
+
+	/* init IO addresses */
+	ap->ioaddr.cmd_addr = legacy_dr->cmd_addr[port_no];
+	ap->ioaddr.altstatus_addr = legacy_dr->ctl_addr[port_no];
+	ap->ioaddr.ctl_addr = legacy_dr->ctl_addr[port_no];
+	ata_std_ports(&ap->ioaddr);
+
+	return 0;
+}
+
+/**
+ *	ata_init_legacy_host - acquire legacy ATA resources and init ATA host
+ *	@host: target ATA host
+ *	@legacy_mask: out parameter, mask indicating ports is in legacy mode
+ *	@was_busy: out parameter, indicates whether any port was busy
+ *
+ *	Acquire legacy ATA resources for ports.
+ *
+ *	LOCKING:
+ *	Inherited from calling layer (may sleep).
+ *
+ *	RETURNS:
+ *	0 on success, -errno otherwise.
+ */
+static int ata_init_legacy_host(struct ata_host *host,
+				unsigned int *legacy_mask, int *was_busy)
+{
+	struct device *gdev = host->dev;
+	struct ata_legacy_devres *legacy_dr;
+	int i, rc;
+
+	if (!devres_open_group(gdev, NULL, GFP_KERNEL))
+		return -ENOMEM;
+
+	rc = -ENOMEM;
+	legacy_dr = devres_alloc(ata_legacy_release, sizeof(*legacy_dr),
+				 GFP_KERNEL);
+	if (!legacy_dr)
+		goto err_out;
+	devres_add(gdev, legacy_dr);
+
+	for (i = 0; i < 2; i++) {
+		*legacy_mask &= ~(1 << i);
+		rc = ata_init_legacy_port(host->ports[i], legacy_dr);
+		if (rc == 0)
+			legacy_dr->mask |= 1 << i;
+		else if (rc == -EBUSY)
+			(*was_busy)++;
+	}
+
+	if (!legacy_dr->mask)
+		return -EBUSY;
+
+	for (i = 0; i < 2; i++)
+		if (!(legacy_dr->mask & (1 << i)))
+			host->ports[i]->ops = &ata_dummy_port_ops;
+
+	*legacy_mask |= legacy_dr->mask;
+
+	devres_remove_group(gdev, NULL);
+	return 0;
+
+ err_out:
+	devres_release_group(gdev, NULL);
+	return rc;
+}
+
+/**
+ *	ata_request_legacy_irqs - request legacy ATA IRQs
+ *	@host: target ATA host
+ *	@handler: array of IRQ handlers
+ *	@irq_flags: array of IRQ flags
+ *	@dev_id: array of IRQ dev_ids
+ *
+ *	Request legacy IRQs for non-dummy legacy ports in @host.  All
+ *	IRQ parameters are passed as array to allow ports to have
+ *	separate IRQ handlers.
+ *
+ *	LOCKING:
+ *	Inherited from calling layer (may sleep).
+ *
+ *	RETURNS:
+ *	0 on success, -errno otherwise.
+ */
+static int ata_request_legacy_irqs(struct ata_host *host,
+				   irq_handler_t const *handler,
+				   const unsigned int *irq_flags,
+				   void * const *dev_id)
+{
+	struct device *gdev = host->dev;
+	struct ata_legacy_devres *legacy_dr;
+	int i, rc;
+
+	legacy_dr = devres_find(host->dev, ata_legacy_release, NULL, NULL);
+	BUG_ON(!legacy_dr);
+
+	for (i = 0; i < 2; i++) {
+		unsigned int irq;
+
+		/* FIXME: ATA_*_IRQ() should take generic device not pci_dev */
+		if (i == 0)
+			irq = ATA_PRIMARY_IRQ(to_pci_dev(gdev));
 		else
-			probe_ent->irq = ATA_SECONDARY_IRQ(pdev);
-		probe_ent->port[1].cmd_addr = iomap[2];
-		probe_ent->port[1].altstatus_addr =
-		probe_ent->port[1].ctl_addr = iomap[3];
-		if (bmdma) {
-			probe_ent->port[1].bmdma_addr = bmdma + 8;
-			if ((!(port[1]->flags & ATA_FLAG_IGN_SIMPLEX)) &&
-			    (ioread8(bmdma + 10) & 0x80))
-				probe_ent->_host_flags |= ATA_HOST_SIMPLEX;
+			irq = ATA_SECONDARY_IRQ(to_pci_dev(gdev));
+
+		if (!(legacy_dr->mask & (1 << i)))
+			continue;
+
+		if (!handler[i]) {
+			dev_printk(KERN_ERR, gdev,
+				   "NULL handler specified for port %d\n", i);
+			rc = -EINVAL;
+			goto err_out;
+		}
+
+		rc = request_irq(irq, handler[i], irq_flags[i], DRV_NAME,
+				 dev_id[i]);
+		if (rc) {
+			dev_printk(KERN_ERR, gdev,
+				"irq %u request failed (errno=%d)\n", irq, rc);
+			goto err_out;
 		}
-		ata_std_ports(&probe_ent->port[1]);
 
-		/* FIXME: could be pointing to stack area; must copy */
-		probe_ent->pinfo2 = port[1];
-	} else
-		probe_ent->dummy_port_mask |= ATA_PORT_SECONDARY;
+		/* record irq allocation in legacy_dr */
+		legacy_dr->irq[i] = irq;
+		legacy_dr->irq_dev_id[i] = dev_id[i];
 
-	return probe_ent;
-}
+		/* only used to print info */
+		if (i == 0)
+			host->irq = irq;
+		else
+			host->irq2 = irq;
+	}
 
+	return 0;
+
+ err_out:
+	ata_legacy_free_irqs(legacy_dr);
+	return rc;
+}
 
 /**
  *	ata_pci_init_one - Initialize/register PCI IDE host controller
@@ -718,8 +949,8 @@ int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info,
 		      unsigned int n_ports)
 {
 	struct device *dev = &pdev->dev;
-	struct ata_probe_ent *probe_ent = NULL;
-	struct ata_port_info *port[2];
+	struct ata_host *host = NULL;
+	const struct ata_port_info *port[2];
 	u8 mask;
 	unsigned int legacy_mode = 0;
 	int rc;
@@ -743,7 +974,7 @@ int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info,
 
 	   Checking dev->is_enabled is insufficient as this is not set at
 	   boot for the primary video which is BIOS enabled
-         */
+	  */
 
 	rc = pcim_enable_device(pdev);
 	if (rc)
@@ -769,96 +1000,68 @@ int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info,
 #endif
 	}
 
+	/* alloc and init host */
+	host = ata_host_alloc_pinfo(dev, port, 2);
+	if (!host) {
+		dev_printk(KERN_ERR, &pdev->dev,
+			   "failed to allocate ATA host\n");
+		rc = -ENOMEM;
+		goto err_out;
+	}
+
 	if (!legacy_mode) {
-		rc = pci_request_regions(pdev, DRV_NAME);
-		if (rc) {
-			pcim_pin_device(pdev);
+		unsigned int port_mask;
+
+		port_mask = ATA_PORT_PRIMARY;
+		if (n_ports > 1)
+			port_mask |= ATA_PORT_SECONDARY;
+
+		rc = ata_pci_init_native_host(host, port_mask);
+		if (rc)
 			goto err_out;
-		}
 	} else {
-		/* Deal with combined mode hack. This side of the logic all
-		   goes away once the combined mode hack is killed in 2.6.21 */
-		if (!devm_request_region(dev, ATA_PRIMARY_CMD, 8, "libata")) {
-			struct resource *conflict, res;
-			res.start = ATA_PRIMARY_CMD;
-			res.end = ATA_PRIMARY_CMD + 8 - 1;
-			conflict = ____request_resource(&ioport_resource, &res);
-			while (conflict->child)
-				conflict = ____request_resource(conflict, &res);
-			if (!strcmp(conflict->name, "libata"))
-				legacy_mode |= ATA_PORT_PRIMARY;
-			else {
-				pcim_pin_device(pdev);
-				printk(KERN_WARNING "ata: 0x%0X IDE port busy\n" \
-						    "ata: conflict with %s\n",
-						    ATA_PRIMARY_CMD,
-						    conflict->name);
-			}
-		} else
-			legacy_mode |= ATA_PORT_PRIMARY;
-
-		if (!devm_request_region(dev, ATA_SECONDARY_CMD, 8, "libata")) {
-			struct resource *conflict, res;
-			res.start = ATA_SECONDARY_CMD;
-			res.end = ATA_SECONDARY_CMD + 8 - 1;
-			conflict = ____request_resource(&ioport_resource, &res);
-			while (conflict->child)
-				conflict = ____request_resource(conflict, &res);
-			if (!strcmp(conflict->name, "libata"))
-				legacy_mode |= ATA_PORT_SECONDARY;
-			else {
-				pcim_pin_device(pdev);
-				printk(KERN_WARNING "ata: 0x%X IDE port busy\n" \
-						    "ata: conflict with %s\n",
-						    ATA_SECONDARY_CMD,
-						    conflict->name);
-			}
-		} else
-			legacy_mode |= ATA_PORT_SECONDARY;
-
-		if (legacy_mode & ATA_PORT_PRIMARY)
-			pci_request_region(pdev, 1, DRV_NAME);
-		if (legacy_mode & ATA_PORT_SECONDARY)
-			pci_request_region(pdev, 3, DRV_NAME);
-		/* If there is a DMA resource, allocate it */
-		pci_request_region(pdev, 4, DRV_NAME);
-	}
+		int was_busy = 0;
 
-	/* we have legacy mode, but all ports are unavailable */
-	if (legacy_mode == (1 << 3)) {
-		rc = -EBUSY;
-		goto err_out;
+		rc = ata_init_legacy_host(host, &legacy_mode, &was_busy);
+		if (was_busy)
+			pcim_pin_device(pdev);
+		if (rc)
+			goto err_out;
+
+		/* request respective PCI regions, may fail */
+		rc = pci_request_region(pdev, 1, DRV_NAME);
+		rc = pci_request_region(pdev, 3, DRV_NAME);
 	}
 
-	/* TODO: If we get no DMA mask we should fall back to PIO */
-	rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
-	if (rc)
-		goto err_out;
-	rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
+	/* init BMDMA, may fail */
+	ata_pci_init_bmdma(host);
+	pci_set_master(pdev);
+
+	/* start host and request IRQ */
+	rc = ata_host_start(host);
 	if (rc)
 		goto err_out;
 
-	if (legacy_mode) {
-		probe_ent = ata_pci_init_legacy_port(pdev, port, legacy_mode);
-	} else {
-		if (n_ports == 2)
-			probe_ent = ata_pci_init_native_mode(pdev, port, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY);
-		else
-			probe_ent = ata_pci_init_native_mode(pdev, port, ATA_PORT_PRIMARY);
+	if (!legacy_mode)
+		rc = devm_request_irq(dev, pdev->irq,
+				      port_info[0]->port_ops->irq_handler,
+				      IRQF_SHARED, DRV_NAME, host);
+	else {
+		irq_handler_t handler[2] = { host->ops->irq_handler,
+					     host->ops->irq_handler };
+		unsigned int irq_flags[2] = { IRQF_SHARED, IRQF_SHARED };
+		void *dev_id[2] = { host, host };
+
+		rc = ata_request_legacy_irqs(host, handler, irq_flags, dev_id);
 	}
-	if (!probe_ent) {
-		rc = -ENOMEM;
+	if (rc)
 		goto err_out;
-	}
-
-	pci_set_master(pdev);
 
-	if (!ata_device_add(probe_ent)) {
-		rc = -ENODEV;
+	/* register */
+	rc = ata_host_register(host, port_info[0]->sht);
+	if (rc)
 		goto err_out;
-	}
 
-	devm_kfree(dev, probe_ent);
 	devres_remove_group(dev, NULL);
 	return 0;
 
@@ -893,12 +1096,12 @@ int ata_pci_clear_simplex(struct pci_dev *pdev)
 	return 0;
 }
 
-unsigned long ata_pci_default_filter(const struct ata_port *ap, struct ata_device *adev, unsigned long xfer_mask)
+unsigned long ata_pci_default_filter(struct ata_device *adev, unsigned long xfer_mask)
 {
 	/* Filter out DMA modes if the device has been configured by
 	   the BIOS as PIO only */
 
-	if (ap->ioaddr.bmdma_addr == 0)
+	if (adev->ap->ioaddr.bmdma_addr == 0)
 		xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA);
 	return xfer_mask;
 }
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index 1f1e3a5..5f4d40c 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -52,6 +52,7 @@ enum {
 	ATA_DNXFER_QUIET	= (1 << 31),
 };
 
+extern unsigned int ata_print_id;
 extern struct workqueue_struct *ata_aux_wq;
 extern int atapi_enabled;
 extern int atapi_dmadir;
@@ -92,10 +93,7 @@ extern int ata_flush_cache(struct ata_device *dev);
 extern void ata_dev_init(struct ata_device *dev);
 extern int ata_task_ioctl(struct scsi_device *scsidev, void __user *arg);
 extern int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg);
-extern void ata_port_init(struct ata_port *ap, struct ata_host *host,
-			  const struct ata_probe_ent *ent, unsigned int port_no);
-extern struct ata_probe_ent *ata_probe_ent_alloc(struct device *dev,
-						 const struct ata_port_info *port);
+extern struct ata_port *ata_port_alloc(struct ata_host *host);
 
 /* libata-acpi.c */
 #ifdef CONFIG_SATA_ACPI
@@ -113,8 +111,8 @@ static inline int ata_acpi_push_id(struct ata_port *ap, unsigned int ix)
 #endif
 
 /* libata-scsi.c */
-extern struct scsi_transport_template ata_scsi_transport_template;
-
+extern int ata_scsi_add_hosts(struct ata_host *host,
+			      struct scsi_host_template *sht);
 extern void ata_scsi_scan_host(struct ata_port *ap);
 extern int ata_scsi_offline_dev(struct ata_device *dev);
 extern void ata_scsi_hotplug(struct work_struct *work);
diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c
index 11ea552..d40edeb 100644
--- a/drivers/ata/pata_ali.c
+++ b/drivers/ata/pata_ali.c
@@ -34,7 +34,7 @@
 #include <linux/dmi.h>
 
 #define DRV_NAME "pata_ali"
-#define DRV_VERSION "0.7.3"
+#define DRV_VERSION "0.7.4"
 
 /*
  *	Cable special cases
@@ -90,59 +90,6 @@ static int ali_c2_cable_detect(struct ata_port *ap)
 }
 
 /**
- *	ali_early_error_handler	-	reset for eary chip
- *	@ap: ATA port
- *
- *	Handle the reset callback for the later chips with cable detect
- */
-
-static int ali_c2_pre_reset(struct ata_port *ap)
-{
-	ap->cbl = ali_c2_cable_detect(ap);
-	return ata_std_prereset(ap);
-}
-
-static void ali_c2_error_handler(struct ata_port *ap)
-{
-	ata_bmdma_drive_eh(ap, ali_c2_pre_reset,
-			       ata_std_softreset, NULL,
-			       ata_std_postreset);
-}
-
-/**
- *	ali_early_cable_detect	-	cable detection
- *	@ap: ATA port
- *
- *	Perform cable detection for older chipsets. This turns out to be
- *	rather easy to implement
- */
-
-static int ali_early_cable_detect(struct ata_port *ap)
-{
-	return ATA_CBL_PATA40;
-}
-
-/**
- *	ali_early_probe_init	-	reset for early chip
- *	@ap: ATA port
- *
- *	Handle the reset callback for the early (pre cable detect) chips.
- */
-
-static int ali_early_pre_reset(struct ata_port *ap)
-{
-	ap->cbl = ali_early_cable_detect(ap);
-	return ata_std_prereset(ap);
-}
-
-static void ali_early_error_handler(struct ata_port *ap)
-{
-	return ata_bmdma_drive_eh(ap, ali_early_pre_reset,
-				     ata_std_softreset, NULL,
-				     ata_std_postreset);
-}
-
-/**
  *	ali_20_filter		-	filter for earlier ALI DMA
  *	@ap: ALi ATA port
  *	@adev: attached device
@@ -151,7 +98,7 @@ static void ali_early_error_handler(struct ata_port *ap)
  *	fix that later on. Also ensure we do not do UDMA on WDC drives
  */
 
-static unsigned long ali_20_filter(const struct ata_port *ap, struct ata_device *adev, unsigned long mask)
+static unsigned long ali_20_filter(struct ata_device *adev, unsigned long mask)
 {
 	char model_num[ATA_ID_PROD_LEN + 1];
 	/* No DMA on anything but a disk for now */
@@ -160,7 +107,7 @@ static unsigned long ali_20_filter(const struct ata_port *ap, struct ata_device
 	ata_id_c_string(adev->id, model_num, ATA_ID_PROD, sizeof(model_num));
 	if (strstr(model_num, "WDC"))
 		return mask &= ~ATA_MASK_UDMA;
-	return ata_pci_default_filter(ap, adev, mask);
+	return ata_pci_default_filter(adev, mask);
 }
 
 /**
@@ -314,7 +261,6 @@ static void ali_set_dmamode(struct ata_port *ap, struct ata_device *adev)
 
 /**
  *	ali_lock_sectors	-	Keep older devices to 255 sector mode
- *	@ap: ATA port
  *	@adev: Device
  *
  *	Called during the bus probe for each device that is found. We use
@@ -324,7 +270,7 @@ static void ali_set_dmamode(struct ata_port *ap, struct ata_device *adev)
  *	slower PIO methods
  */
 
-static void ali_lock_sectors(struct ata_port *ap, struct ata_device *adev)
+static void ali_lock_sectors(struct ata_device *adev)
 {
 	adev->max_sectors = 255;
 }
@@ -366,8 +312,9 @@ static struct ata_port_operations ali_early_port_ops = {
 
 	.freeze		= ata_bmdma_freeze,
 	.thaw		= ata_bmdma_thaw,
-	.error_handler	= ali_early_error_handler,
+	.error_handler	= ata_bmdma_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= ata_cable_40wire,
 
 	.qc_prep 	= ata_qc_prep,
 	.qc_issue	= ata_qc_issue_prot,
@@ -402,8 +349,9 @@ static struct ata_port_operations ali_20_port_ops = {
 
 	.freeze		= ata_bmdma_freeze,
 	.thaw		= ata_bmdma_thaw,
-	.error_handler	= ali_early_error_handler,
+	.error_handler	= ata_bmdma_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= ata_cable_40wire,
 
 	.bmdma_setup 	= ata_bmdma_setup,
 	.bmdma_start 	= ata_bmdma_start,
@@ -440,8 +388,9 @@ static struct ata_port_operations ali_c2_port_ops = {
 
 	.freeze		= ata_bmdma_freeze,
 	.thaw		= ata_bmdma_thaw,
-	.error_handler	= ali_c2_error_handler,
+	.error_handler	= ata_bmdma_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= ali_c2_cable_detect,
 
 	.bmdma_setup 	= ata_bmdma_setup,
 	.bmdma_start 	= ata_bmdma_start,
@@ -477,8 +426,9 @@ static struct ata_port_operations ali_c5_port_ops = {
 
 	.freeze		= ata_bmdma_freeze,
 	.thaw		= ata_bmdma_thaw,
-	.error_handler	= ali_c2_error_handler,
+	.error_handler	= ata_bmdma_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= ali_c2_cable_detect,
 
 	.bmdma_setup 	= ata_bmdma_setup,
 	.bmdma_start 	= ata_bmdma_start,
diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c
index 1838176..536ee89 100644
--- a/drivers/ata/pata_amd.c
+++ b/drivers/ata/pata_amd.c
@@ -25,7 +25,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_amd"
-#define DRV_VERSION "0.2.8"
+#define DRV_VERSION "0.3.8"
 
 /**
  *	timing_setup		-	shared timing computation and load
@@ -119,32 +119,25 @@ static void timing_setup(struct ata_port *ap, struct ata_device *adev, int offse
 }
 
 /**
- *	amd_probe_init		-	cable detection
+ *	amd_probe_init		-	perform reset handling
  *	@ap: ATA port
  *
- *	Perform cable detection. The BIOS stores this in PCI config
- *	space for us.
+ *	Reset sequence checking enable bits to see which ports are
+ *	active.
  */
 
 static int amd_pre_reset(struct ata_port *ap)
 {
-	static const u32 bitmask[2] = {0x03, 0x0C};
 	static const struct pci_bits amd_enable_bits[] = {
 		{ 0x40, 1, 0x02, 0x02 },
 		{ 0x40, 1, 0x01, 0x01 }
 	};
 
 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
-	u8 ata66;
 
 	if (!pci_test_config_bits(pdev, &amd_enable_bits[ap->port_no]))
 		return -ENOENT;
 
-	pci_read_config_byte(pdev, 0x42, &ata66);
-	if (ata66 & bitmask[ap->port_no])
-		ap->cbl = ATA_CBL_PATA80;
-	else
-		ap->cbl = ATA_CBL_PATA40;
 	return ata_std_prereset(ap);
 
 }
@@ -156,28 +149,16 @@ static void amd_error_handler(struct ata_port *ap)
 				      ata_std_postreset);
 }
 
-static int amd_early_pre_reset(struct ata_port *ap)
+static int amd_cable_detect(struct ata_port *ap)
 {
+	static const u32 bitmask[2] = {0x03, 0x0C};
 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
-	static struct pci_bits amd_enable_bits[] = {
-		{ 0x40, 1, 0x02, 0x02 },
-		{ 0x40, 1, 0x01, 0x01 }
-	};
-
-	if (!pci_test_config_bits(pdev, &amd_enable_bits[ap->port_no]))
-		return -ENOENT;
-
-	/* No host side cable detection */
-	ap->cbl = ATA_CBL_PATA80;
-	return ata_std_prereset(ap);
-
-}
+	u8 ata66;
 
-static void amd_early_error_handler(struct ata_port *ap)
-{
-	ata_bmdma_drive_eh(ap, amd_early_pre_reset,
-			       ata_std_softreset, NULL,
-			       ata_std_postreset);
+	pci_read_config_byte(pdev, 0x42, &ata66);
+	if (ata66 & bitmask[ap->port_no])
+		return ATA_CBL_PATA80;
+	return ATA_CBL_PATA40;
 }
 
 /**
@@ -247,31 +228,16 @@ static void amd133_set_dmamode(struct ata_port *ap, struct ata_device *adev)
  */
 
 static int nv_pre_reset(struct ata_port *ap) {
-	static const u8 bitmask[2] = {0x03, 0x0C};
 	static const struct pci_bits nv_enable_bits[] = {
 		{ 0x50, 1, 0x02, 0x02 },
 		{ 0x50, 1, 0x01, 0x01 }
 	};
 
 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
-	u8 ata66;
-	u16 udma;
 
 	if (!pci_test_config_bits(pdev, &nv_enable_bits[ap->port_no]))
 		return -ENOENT;
 
-	pci_read_config_byte(pdev, 0x52, &ata66);
-	if (ata66 & bitmask[ap->port_no])
-		ap->cbl = ATA_CBL_PATA80;
-	else
-		ap->cbl = ATA_CBL_PATA40;
-
-	/* We now have to double check because the Nvidia boxes BIOS
-	   doesn't always set the cable bits but does set mode bits */
-
-	pci_read_config_word(pdev, 0x62 - 2 * ap->port_no, &udma);
-	if ((udma & 0xC4) == 0xC4 || (udma & 0xC400) == 0xC400)
-		ap->cbl = ATA_CBL_PATA80;
 	return ata_std_prereset(ap);
 }
 
@@ -281,6 +247,29 @@ static void nv_error_handler(struct ata_port *ap)
 			       ata_std_softreset, NULL,
 			       ata_std_postreset);
 }
+
+static int nv_cable_detect(struct ata_port *ap)
+{
+	static const u8 bitmask[2] = {0x03, 0x0C};
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+	u8 ata66;
+	u16 udma;
+	int cbl;
+
+	pci_read_config_byte(pdev, 0x52, &ata66);
+	if (ata66 & bitmask[ap->port_no])
+		cbl = ATA_CBL_PATA80;
+	else
+		cbl = ATA_CBL_PATA40;
+
+ 	/* We now have to double check because the Nvidia boxes BIOS
+ 	   doesn't always set the cable bits but does set mode bits */
+ 	pci_read_config_word(pdev, 0x62 - 2 * ap->port_no, &udma);
+ 	if ((udma & 0xC4) == 0xC4 || (udma & 0xC400) == 0xC400)
+		cbl = ATA_CBL_PATA80;
+	return cbl;
+}
+
 /**
  *	nv100_set_piomode	-	set initial PIO mode data
  *	@ap: ATA interface
@@ -353,8 +342,9 @@ static struct ata_port_operations amd33_port_ops = {
 
 	.freeze		= ata_bmdma_freeze,
 	.thaw		= ata_bmdma_thaw,
-	.error_handler	= amd_early_error_handler,
+	.error_handler	= amd_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= ata_cable_40wire,
 
 	.bmdma_setup 	= ata_bmdma_setup,
 	.bmdma_start 	= ata_bmdma_start,
@@ -387,8 +377,9 @@ static struct ata_port_operations amd66_port_ops = {
 
 	.freeze		= ata_bmdma_freeze,
 	.thaw		= ata_bmdma_thaw,
-	.error_handler	= amd_early_error_handler,
+	.error_handler	= amd_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= ata_cable_unknown,
 
 	.bmdma_setup 	= ata_bmdma_setup,
 	.bmdma_start 	= ata_bmdma_start,
@@ -423,6 +414,7 @@ static struct ata_port_operations amd100_port_ops = {
 	.thaw		= ata_bmdma_thaw,
 	.error_handler	= amd_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= ata_cable_unknown,
 
 	.bmdma_setup 	= ata_bmdma_setup,
 	.bmdma_start 	= ata_bmdma_start,
@@ -457,6 +449,7 @@ static struct ata_port_operations amd133_port_ops = {
 	.thaw		= ata_bmdma_thaw,
 	.error_handler	= amd_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= amd_cable_detect,
 
 	.bmdma_setup 	= ata_bmdma_setup,
 	.bmdma_start 	= ata_bmdma_start,
@@ -491,6 +484,7 @@ static struct ata_port_operations nv100_port_ops = {
 	.thaw		= ata_bmdma_thaw,
 	.error_handler	= nv_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= nv_cable_detect,
 
 	.bmdma_setup 	= ata_bmdma_setup,
 	.bmdma_start 	= ata_bmdma_start,
@@ -525,6 +519,7 @@ static struct ata_port_operations nv133_port_ops = {
 	.thaw		= ata_bmdma_thaw,
 	.error_handler	= nv_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= nv_cable_detect,
 
 	.bmdma_setup 	= ata_bmdma_setup,
 	.bmdma_start 	= ata_bmdma_start,
diff --git a/drivers/ata/pata_artop.c b/drivers/ata/pata_artop.c
index 21c3028..00e9ec3 100644
--- a/drivers/ata/pata_artop.c
+++ b/drivers/ata/pata_artop.c
@@ -49,8 +49,6 @@ static int artop6210_pre_reset(struct ata_port *ap)
 
 	if (!pci_test_config_bits(pdev, &artop_enable_bits[ap->port_no]))
 		return -ENOENT;
-
-	ap->cbl = ATA_CBL_PATA40;
 	return ata_std_prereset(ap);
 }
 
@@ -85,18 +83,28 @@ static int artop6260_pre_reset(struct ata_port *ap)
 	};
 
 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
-	u8 tmp;
 
 	/* Odd numbered device ids are the units with enable bits (the -R cards) */
 	if (pdev->device % 1 && !pci_test_config_bits(pdev, &artop_enable_bits[ap->port_no]))
 		return -ENOENT;
+	return ata_std_prereset(ap);
+}
 
+/**
+ *	artop6260_cable_detect	-	identify cable type
+ *	@ap: Port
+ *
+ *	Identify the cable type for the ARTOp interface in question
+ */
+ 
+static int artop6260_cable_detect(struct ata_port *ap)
+{
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+	u8 tmp;
 	pci_read_config_byte(pdev, 0x49, &tmp);
 	if (tmp & (1 << ap->port_no))
-		ap->cbl = ATA_CBL_PATA40;
-	else
-		ap->cbl = ATA_CBL_PATA80;
-	return ata_std_prereset(ap);
+		return ATA_CBL_PATA40;
+	return ATA_CBL_PATA80;
 }
 
 /**
@@ -225,7 +233,7 @@ static void artop6260_set_piomode(struct ata_port *ap, struct ata_device *adev)
 /**
  *	artop6210_set_dmamode - Initialize host controller PATA PIO timings
  *	@ap: Port whose timings we are configuring
- *	@adev: um
+ *	@adev: Device whose timings we are configuring
  *
  *	Set DMA mode for device, in host controller PCI config space.
  *
@@ -333,6 +341,7 @@ static const struct ata_port_operations artop6210_ops = {
 	.thaw			= ata_bmdma_thaw,
 	.error_handler		= artop6210_error_handler,
 	.post_internal_cmd 	= ata_bmdma_post_internal_cmd,
+	.cable_detect		= ata_cable_40wire,
 
 	.bmdma_setup		= ata_bmdma_setup,
 	.bmdma_start		= ata_bmdma_start,
@@ -366,6 +375,7 @@ static const struct ata_port_operations artop6260_ops = {
 	.thaw			= ata_bmdma_thaw,
 	.error_handler		= artop6260_error_handler,
 	.post_internal_cmd 	= ata_bmdma_post_internal_cmd,
+	.cable_detect		= artop6260_cable_detect,
 
 	.bmdma_setup		= ata_bmdma_setup,
 	.bmdma_start		= ata_bmdma_start,
diff --git a/drivers/ata/pata_atiixp.c b/drivers/ata/pata_atiixp.c
index 51d9923..39c871a 100644
--- a/drivers/ata/pata_atiixp.c
+++ b/drivers/ata/pata_atiixp.c
@@ -22,7 +22,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_atiixp"
-#define DRV_VERSION "0.4.4"
+#define DRV_VERSION "0.4.5"
 
 enum {
 	ATIIXP_IDE_PIO_TIMING	= 0x40,
@@ -35,23 +35,15 @@ enum {
 
 static int atiixp_pre_reset(struct ata_port *ap)
 {
-	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 	static const struct pci_bits atiixp_enable_bits[] = {
 		{ 0x48, 1, 0x01, 0x00 },
 		{ 0x48, 1, 0x08, 0x00 }
 	};
-	u8 udma;
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 
 	if (!pci_test_config_bits(pdev, &atiixp_enable_bits[ap->port_no]))
 		return -ENOENT;
 
-	/* Hack from drivers/ide/pci. Really we want to know how to do the
-	   raw detection not play follow the bios mode guess */
-	pci_read_config_byte(pdev, ATIIXP_IDE_UDMA_MODE + ap->port_no, &udma);
-	if ((udma & 0x07) >= 0x04 || (udma & 0x70) >= 0x40)
-		ap->cbl = ATA_CBL_PATA80;
-	else
-		ap->cbl = ATA_CBL_PATA40;
 	return ata_std_prereset(ap);
 }
 
@@ -60,6 +52,19 @@ static void atiixp_error_handler(struct ata_port *ap)
 	ata_bmdma_drive_eh(ap, atiixp_pre_reset, ata_std_softreset, NULL,   ata_std_postreset);
 }
 
+static int atiixp_cable_detect(struct ata_port *ap)
+{
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+	u8 udma;
+
+	/* Hack from drivers/ide/pci. Really we want to know how to do the
+	   raw detection not play follow the bios mode guess */
+	pci_read_config_byte(pdev, ATIIXP_IDE_UDMA_MODE + ap->port_no, &udma);
+	if ((udma & 0x07) >= 0x04 || (udma & 0x70) >= 0x40)
+		return  ATA_CBL_PATA80;
+	return ATA_CBL_PATA40;
+}
+
 /**
  *	atiixp_set_pio_timing	-	set initial PIO mode data
  *	@ap: ATA interface
@@ -245,6 +250,7 @@ static struct ata_port_operations atiixp_port_ops = {
 	.thaw		= ata_bmdma_thaw,
 	.error_handler	= atiixp_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= atiixp_cable_detect,
 
 	.bmdma_setup 	= ata_bmdma_setup,
 	.bmdma_start 	= atiixp_bmdma_start,
diff --git a/drivers/ata/pata_cmd640.c b/drivers/ata/pata_cmd640.c
new file mode 100644
index 0000000..2105985
--- /dev/null
+++ b/drivers/ata/pata_cmd640.c
@@ -0,0 +1,312 @@
+/*
+ * pata_cmd640.c 	- CMD640 PCI PATA for new ATA layer
+ *			  (C) 2007 Red Hat Inc
+ *			  Alan Cox <alan@redhat.com>
+ *
+ * Based upon
+ *  linux/drivers/ide/pci/cmd640.c		Version 1.02  Sep 01, 1996
+ *
+ *  Copyright (C) 1995-1996  Linus Torvalds & authors (see driver)
+ *
+ *	This drives only the PCI version of the controller. If you have a
+ *	VLB one then we have enough docs to support it but you can write
+ *	your own code.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <scsi/scsi_host.h>
+#include <linux/libata.h>
+
+#define DRV_NAME "pata_cmd640"
+#define DRV_VERSION "0.0.5"
+
+struct cmd640_reg {
+	int last;
+	u8 reg58[ATA_MAX_DEVICES];
+};
+
+enum {
+	CFR = 0x50,
+	CNTRL = 0x51,
+	CMDTIM = 0x52,
+	ARTIM0 = 0x53,
+	DRWTIM0 = 0x54,
+	ARTIM23 = 0x57,
+	DRWTIM23 = 0x58,
+	BRST = 0x59
+};
+
+/**
+ *	cmd640_set_piomode	-	set initial PIO mode data
+ *	@ap: ATA port
+ *	@adev: ATA device
+ *
+ *	Called to do the PIO mode setup.
+ */
+
+static void cmd640_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+	struct cmd640_reg *timing = ap->private_data;
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+	struct ata_timing t;
+	const unsigned long T = 1000000 / 33;
+	const u8 setup_data[] = { 0x40, 0x40, 0x40, 0x80, 0x00 };
+	u8 reg;
+	int arttim = ARTIM0 + 2 * adev->devno;
+	struct ata_device *pair = ata_dev_pair(adev);
+
+	if (ata_timing_compute(adev, adev->pio_mode, &t, T, 0) < 0) {
+		printk(KERN_ERR DRV_NAME ": mode computation failed.\n");
+		return;
+	}
+
+	/* The second channel has shared timings and the setup timing is
+	   messy to switch to merge it for worst case */
+	if (ap->port_no && pair) {
+		struct ata_timing p;
+		ata_timing_compute(pair, pair->pio_mode, &p, T, 1);
+		ata_timing_merge(&p, &t, &t, ATA_TIMING_SETUP);
+	}
+
+	/* Make the timings fit */
+	if (t.recover > 16) {
+		t.active += t.recover - 16;
+		t.recover = 16;
+	}
+	if (t.active > 16)
+		t.active = 16;
+
+	/* Now convert the clocks into values we can actually stuff into
+	   the chip */
+
+	if (t.recover > 1)
+		t.recover--;	/* 640B only */
+	else
+		t.recover = 15;
+
+	if (t.setup > 4)
+		t.setup = 0xC0;
+	else
+		t.setup = setup_data[t.setup];
+
+	if (ap->port_no == 0) {
+		t.active &= 0x0F;	/* 0 = 16 */
+
+		/* Load setup timing */
+		pci_read_config_byte(pdev, arttim, &reg);
+		reg &= 0x3F;
+		reg |= t.setup;
+		pci_write_config_byte(pdev, arttim, reg);
+
+		/* Load active/recovery */
+		pci_write_config_byte(pdev, arttim + 1, (t.active << 4) | t.recover);
+	} else {
+		/* Save the shared timings for channel, they will be loaded
+		   by qc_issue_prot. Reloading the setup time is expensive 
+		   so we keep a merged one loaded */
+		pci_read_config_byte(pdev, ARTIM23, &reg);
+		reg &= 0x3F;
+		reg |= t.setup;
+		pci_write_config_byte(pdev, ARTIM23, reg);
+		timing->reg58[adev->devno] = (t.active << 4) | t.recover;
+	}
+}
+
+
+/**
+ *	cmd640_qc_issue_prot	-	command preparation hook
+ *	@qc: Command to be issued
+ *
+ *	Channel 1 has shared timings. We must reprogram the
+ *	clock each drive 2/3 switch we do.
+ */
+
+static unsigned int cmd640_qc_issue_prot(struct ata_queued_cmd *qc)
+{
+	struct ata_port *ap = qc->ap;
+	struct ata_device *adev = qc->dev;
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+	struct cmd640_reg *timing = ap->private_data;
+
+	if (ap->port_no != 0 && adev->devno != timing->last) {
+		pci_write_config_byte(pdev, DRWTIM23, timing->reg58[adev->devno]);
+		timing->last = adev->devno;
+	}
+	return ata_qc_issue_prot(qc);
+}
+
+/**
+ *	cmd640_port_start	-	port setup
+ *	@ap: ATA port being set up
+ *
+ *	The CMD640 needs to maintain private data structures so we
+ *	allocate space here.
+ */
+
+static int cmd640_port_start(struct ata_port *ap)
+{
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+	struct cmd640_reg *timing;
+
+	int ret = ata_port_start(ap);
+	if (ret < 0)
+		return ret;
+
+	timing = devm_kzalloc(&pdev->dev, sizeof(struct cmd640_reg), GFP_KERNEL);
+	if (timing == NULL)
+		return -ENOMEM;
+	timing->last = -1;	/* Force a load */
+	ap->private_data = timing;
+	return ret;
+}
+
+static struct scsi_host_template cmd640_sht = {
+	.module			= THIS_MODULE,
+	.name			= DRV_NAME,
+	.ioctl			= ata_scsi_ioctl,
+	.queuecommand		= ata_scsi_queuecmd,
+	.can_queue		= ATA_DEF_QUEUE,
+	.this_id		= ATA_SHT_THIS_ID,
+	.sg_tablesize		= LIBATA_MAX_PRD,
+	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
+	.emulated		= ATA_SHT_EMULATED,
+	.use_clustering		= ATA_SHT_USE_CLUSTERING,
+	.proc_name		= DRV_NAME,
+	.dma_boundary		= ATA_DMA_BOUNDARY,
+	.slave_configure	= ata_scsi_slave_config,
+	.slave_destroy		= ata_scsi_slave_destroy,
+	.bios_param		= ata_std_bios_param,
+#ifdef CONFIG_PM
+	.resume			= ata_scsi_device_resume,
+	.suspend		= ata_scsi_device_suspend,
+#endif
+};
+
+static struct ata_port_operations cmd640_port_ops = {
+	.port_disable	= ata_port_disable,
+	.set_piomode	= cmd640_set_piomode,
+	.mode_filter	= ata_pci_default_filter,
+	.tf_load	= ata_tf_load,
+	.tf_read	= ata_tf_read,
+	.check_status 	= ata_check_status,
+	.exec_command	= ata_exec_command,
+	.dev_select 	= ata_std_dev_select,
+
+	.freeze		= ata_bmdma_freeze,
+	.thaw		= ata_bmdma_thaw,
+	.error_handler	= ata_bmdma_error_handler,
+	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= ata_cable_40wire,
+
+	.bmdma_setup 	= ata_bmdma_setup,
+	.bmdma_start 	= ata_bmdma_start,
+	.bmdma_stop	= ata_bmdma_stop,
+	.bmdma_status 	= ata_bmdma_status,
+
+	.qc_prep 	= ata_qc_prep,
+	.qc_issue	= cmd640_qc_issue_prot,
+
+	/* In theory this is not needed once we kill the prefetcher */
+	.data_xfer	= ata_data_xfer_noirq,
+
+	.irq_handler	= ata_interrupt,
+	.irq_clear	= ata_bmdma_irq_clear,
+	.irq_on		= ata_irq_on,
+	.irq_ack	= ata_irq_ack,
+
+	.port_start	= cmd640_port_start,
+};
+
+static void cmd640_hardware_init(struct pci_dev *pdev)
+{
+	u8 r;
+	u8 ctrl;
+
+	/* CMD640 detected, commiserations */
+	pci_write_config_byte(pdev, 0x5B, 0x00);
+	/* Get version info */
+	pci_read_config_byte(pdev, CFR, &r);
+	/* PIO0 command cycles */
+	pci_write_config_byte(pdev, CMDTIM, 0);
+	/* 512 byte bursts (sector) */
+	pci_write_config_byte(pdev, BRST, 0x40);
+	/* 
+	 * A reporter a long time ago
+	 * Had problems with the data fifo
+	 * So don't run the risk
+	 * Of putting crap on the disk
+	 * For its better just to go slow
+	 */
+	/* Do channel 0 */
+	pci_read_config_byte(pdev, CNTRL, &ctrl);
+	pci_write_config_byte(pdev, CNTRL, ctrl | 0xC0);
+	/* Ditto for channel 1 */
+	pci_read_config_byte(pdev, ARTIM23, &ctrl);
+	ctrl |= 0x0C;
+	pci_write_config_byte(pdev, ARTIM23, ctrl);
+}
+
+static int cmd640_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+	static struct ata_port_info info = {
+		.sht = &cmd640_sht,
+		.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+		.pio_mask = 0x1f,
+		.port_ops = &cmd640_port_ops
+	};
+
+	static struct ata_port_info *port_info[2] = { &info, &info };
+
+	cmd640_hardware_init(pdev);
+	return ata_pci_init_one(pdev, port_info, 2);
+}
+
+static int cmd640_reinit_one(struct pci_dev *pdev)
+{
+	cmd640_hardware_init(pdev);
+#ifdef CONFIG_PM
+	return ata_pci_device_resume(pdev);
+#else
+	return 0;
+#endif
+}
+
+static const struct pci_device_id cmd640[] = {
+	{ PCI_VDEVICE(CMD, 0x640), 0 },
+	{ },
+};
+
+static struct pci_driver cmd640_pci_driver = {
+	.name 		= DRV_NAME,
+	.id_table	= cmd640,
+	.probe 		= cmd640_init_one,
+	.remove		= ata_pci_remove_one,
+#ifdef CONFIG_PM
+	.suspend	= ata_pci_device_suspend,
+#endif
+	.resume		= cmd640_reinit_one,
+};
+
+static int __init cmd640_init(void)
+{
+	return pci_register_driver(&cmd640_pci_driver);
+}
+
+static void __exit cmd640_exit(void)
+{
+	pci_unregister_driver(&cmd640_pci_driver);
+}
+
+MODULE_AUTHOR("Alan Cox");
+MODULE_DESCRIPTION("low-level driver for CMD640 PATA controllers");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, cmd640);
+MODULE_VERSION(DRV_VERSION);
+
+module_init(cmd640_init);
+module_exit(cmd640_exit);
diff --git a/drivers/ata/pata_cmd64x.c b/drivers/ata/pata_cmd64x.c
index 5b13bdd..3989cc5 100644
--- a/drivers/ata/pata_cmd64x.c
+++ b/drivers/ata/pata_cmd64x.c
@@ -75,13 +75,7 @@ enum {
 	DTPR1		= 0x7C
 };
 
-static int cmd64x_pre_reset(struct ata_port *ap)
-{
-	ap->cbl = ATA_CBL_PATA40;
-	return ata_std_prereset(ap);
-}
-
-static int cmd648_pre_reset(struct ata_port *ap)
+static int cmd648_cable_detect(struct ata_port *ap)
 {
 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 	u8 r;
@@ -89,21 +83,8 @@ static int cmd648_pre_reset(struct ata_port *ap)
 	/* Check cable detect bits */
 	pci_read_config_byte(pdev, BMIDECSR, &r);
 	if (r & (1 << ap->port_no))
-		ap->cbl = ATA_CBL_PATA80;
-	else
-		ap->cbl = ATA_CBL_PATA40;
-
-	return ata_std_prereset(ap);
-}
-
-static void cmd64x_error_handler(struct ata_port *ap)
-{
-	return ata_bmdma_drive_eh(ap, cmd64x_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
-}
-
-static void cmd648_error_handler(struct ata_port *ap)
-{
-	ata_bmdma_drive_eh(ap, cmd648_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
+		return ATA_CBL_PATA80;
+	return ATA_CBL_PATA40;
 }
 
 /**
@@ -304,8 +285,9 @@ static struct ata_port_operations cmd64x_port_ops = {
 
 	.freeze		= ata_bmdma_freeze,
 	.thaw		= ata_bmdma_thaw,
-	.error_handler	= cmd64x_error_handler,
+	.error_handler	= ata_bmdma_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= ata_cable_40wire,
 
 	.bmdma_setup 	= ata_bmdma_setup,
 	.bmdma_start 	= ata_bmdma_start,
@@ -338,8 +320,9 @@ static struct ata_port_operations cmd646r1_port_ops = {
 
 	.freeze		= ata_bmdma_freeze,
 	.thaw		= ata_bmdma_thaw,
-	.error_handler	= cmd64x_error_handler,
+	.error_handler	= ata_bmdma_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= ata_cable_40wire,
 
 	.bmdma_setup 	= ata_bmdma_setup,
 	.bmdma_start 	= ata_bmdma_start,
@@ -372,8 +355,9 @@ static struct ata_port_operations cmd648_port_ops = {
 
 	.freeze		= ata_bmdma_freeze,
 	.thaw		= ata_bmdma_thaw,
-	.error_handler	= cmd648_error_handler,
+	.error_handler	= ata_bmdma_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= cmd648_cable_detect,
 
 	.bmdma_setup 	= ata_bmdma_setup,
 	.bmdma_start 	= ata_bmdma_start,
diff --git a/drivers/ata/pata_cs5520.c b/drivers/ata/pata_cs5520.c
index 55cc293..79bef0d 100644
--- a/drivers/ata/pata_cs5520.c
+++ b/drivers/ata/pata_cs5520.c
@@ -139,18 +139,6 @@ static void cs5520_set_piomode(struct ata_port *ap, struct ata_device *adev)
 	cs5520_set_timings(ap, adev, adev->pio_mode);
 }
 
-
-static int cs5520_pre_reset(struct ata_port *ap)
-{
-	ap->cbl = ATA_CBL_PATA40;
-	return ata_std_prereset(ap);
-}
-
-static void cs5520_error_handler(struct ata_port *ap)
-{
-	return ata_bmdma_drive_eh(ap, cs5520_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
-}
-
 static struct scsi_host_template cs5520_sht = {
 	.module			= THIS_MODULE,
 	.name			= DRV_NAME,
@@ -186,8 +174,9 @@ static struct ata_port_operations cs5520_port_ops = {
 
 	.freeze			= ata_bmdma_freeze,
 	.thaw			= ata_bmdma_thaw,
-	.error_handler		= cs5520_error_handler,
+	.error_handler		= ata_bmdma_error_handler,
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
+	.cable_detect		= ata_cable_40wire,
 
 	.bmdma_setup		= ata_bmdma_setup,
 	.bmdma_start		= ata_bmdma_start,
@@ -197,7 +186,6 @@ static struct ata_port_operations cs5520_port_ops = {
 	.qc_issue		= ata_qc_issue_prot,
 	.data_xfer		= ata_data_xfer,
 
-	.irq_handler		= ata_interrupt,
 	.irq_clear		= ata_bmdma_irq_clear,
 	.irq_on			= ata_irq_on,
 	.irq_ack		= ata_irq_ack,
@@ -205,91 +193,104 @@ static struct ata_port_operations cs5520_port_ops = {
 	.port_start		= ata_port_start,
 };
 
-static int __devinit cs5520_init_one(struct pci_dev *dev, const struct pci_device_id *id)
+static int __devinit cs5520_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 {
+	struct ata_port_info pi = {
+		.flags		= ATA_FLAG_SLAVE_POSS,
+		.pio_mask	= 0x1f,
+		.port_ops	= &cs5520_port_ops,
+	};
+	const struct ata_port_info *ppi[2];
 	u8 pcicfg;
-	void __iomem *iomap[5];
-	static struct ata_probe_ent probe[2];
-	int ports = 0;
+	void *iomap[5];
+	struct ata_host *host;
+	struct ata_ioports *ioaddr;
+	int i, rc;
 
 	/* IDE port enable bits */
-	pci_read_config_byte(dev, 0x60, &pcicfg);
+	pci_read_config_byte(pdev, 0x60, &pcicfg);
 
 	/* Check if the ATA ports are enabled */
 	if ((pcicfg & 3) == 0)
 		return -ENODEV;
 
+	ppi[0] = ppi[1] = &ata_dummy_port_info;
+	if (pcicfg & 1)
+		ppi[0] = &pi;
+	if (pcicfg & 2)
+		ppi[1] = &pi;
+
 	if ((pcicfg & 0x40) == 0) {
-		printk(KERN_WARNING DRV_NAME ": DMA mode disabled. Enabling.\n");
-		pci_write_config_byte(dev, 0x60, pcicfg | 0x40);
+		dev_printk(KERN_WARNING, &pdev->dev,
+			   "DMA mode disabled. Enabling.\n");
+		pci_write_config_byte(pdev, 0x60, pcicfg | 0x40);
 	}
 
+	pi.mwdma_mask = id->driver_data;
+
+	host = ata_host_alloc_pinfo(&pdev->dev, ppi, 2);
+	if (!host)
+		return -ENOMEM;
+
 	/* Perform set up for DMA */
-	if (pci_enable_device_bars(dev, 1<<2)) {
+	if (pci_enable_device_bars(pdev, 1<<2)) {
 		printk(KERN_ERR DRV_NAME ": unable to configure BAR2.\n");
 		return -ENODEV;
 	}
-	pci_set_master(dev);
-	if (pci_set_dma_mask(dev, DMA_32BIT_MASK)) {
+
+	if (pci_set_dma_mask(pdev, DMA_32BIT_MASK)) {
 		printk(KERN_ERR DRV_NAME ": unable to configure DMA mask.\n");
 		return -ENODEV;
 	}
-	if (pci_set_consistent_dma_mask(dev, DMA_32BIT_MASK)) {
+	if (pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK)) {
 		printk(KERN_ERR DRV_NAME ": unable to configure consistent DMA mask.\n");
 		return -ENODEV;
 	}
 
-	/* Map IO ports */
-	iomap[0] = devm_ioport_map(&dev->dev, 0x1F0, 8);
-	iomap[1] = devm_ioport_map(&dev->dev, 0x3F6, 1);
-	iomap[2] = devm_ioport_map(&dev->dev, 0x170, 8);
-	iomap[3] = devm_ioport_map(&dev->dev, 0x376, 1);
-	iomap[4] = pcim_iomap(dev, 2, 0);
+	/* Map IO ports and initialize host accordingly */
+	iomap[0] = devm_ioport_map(&pdev->dev, 0x1F0, 8);
+	iomap[1] = devm_ioport_map(&pdev->dev, 0x3F6, 1);
+	iomap[2] = devm_ioport_map(&pdev->dev, 0x170, 8);
+	iomap[3] = devm_ioport_map(&pdev->dev, 0x376, 1);
+	iomap[4] = pcim_iomap(pdev, 2, 0);
 
 	if (!iomap[0] || !iomap[1] || !iomap[2] || !iomap[3] || !iomap[4])
 		return -ENOMEM;
 
-	/* We have to do our own plumbing as the PCI setup for this
-	   chipset is non-standard so we can't punt to the libata code */
-
-	INIT_LIST_HEAD(&probe[0].node);
-	probe[0].dev = pci_dev_to_dev(dev);
-	probe[0].port_ops = &cs5520_port_ops;
-	probe[0].sht = &cs5520_sht;
-	probe[0].pio_mask = 0x1F;
-	probe[0].mwdma_mask = id->driver_data;
-	probe[0].irq = 14;
-	probe[0].irq_flags = 0;
-	probe[0].port_flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST;
-	probe[0].n_ports = 1;
-	probe[0].port[0].cmd_addr = iomap[0];
-	probe[0].port[0].ctl_addr = iomap[1];
-	probe[0].port[0].altstatus_addr = iomap[1];
-	probe[0].port[0].bmdma_addr = iomap[4];
-
-	/* The secondary lurks at different addresses but is otherwise
-	   the same beastie */
-
-	probe[1] = probe[0];
-	INIT_LIST_HEAD(&probe[1].node);
-	probe[1].irq = 15;
-	probe[1].port[0].cmd_addr = iomap[2];
-	probe[1].port[0].ctl_addr = iomap[3];
-	probe[1].port[0].altstatus_addr = iomap[3];
-	probe[1].port[0].bmdma_addr = iomap[4] + 8;
-
-	/* Let libata fill in the port details */
-	ata_std_ports(&probe[0].port[0]);
-	ata_std_ports(&probe[1].port[0]);
-
-	/* Now add the ports that are active */
-	if (pcicfg & 1)
-		ports += ata_device_add(&probe[0]);
-	if (pcicfg & 2)
-		ports += ata_device_add(&probe[1]);
-	if (ports)
-		return 0;
-	return -ENODEV;
+	ioaddr = &host->ports[0]->ioaddr;
+	ioaddr->cmd_addr = iomap[0];
+	ioaddr->ctl_addr = iomap[1];
+	ioaddr->altstatus_addr = iomap[1];
+	ioaddr->bmdma_addr = iomap[4];
+	ata_std_ports(ioaddr);
+
+	ioaddr = &host->ports[1]->ioaddr;
+	ioaddr->cmd_addr = iomap[2];
+	ioaddr->ctl_addr = iomap[3];
+	ioaddr->altstatus_addr = iomap[3];
+	ioaddr->bmdma_addr = iomap[4] + 8;
+	ata_std_ports(ioaddr);
+
+	/* activate the host */
+	pci_set_master(pdev);
+	rc = ata_host_start(host);
+	if (rc)
+		return rc;
+
+	for (i = 0; i < 2; i++) {
+		static const int irq[] = { 14, 15 };
+		struct ata_port *ap = host->ports[0];
+
+		if (ata_port_is_dummy(ap))
+			continue;
+
+		rc = devm_request_irq(&pdev->dev, irq[ap->port_no],
+				      ata_interrupt, 0, DRV_NAME, host);
+		if (rc)
+			return rc;
+	}
+
+	return ata_host_register(host, &cs5520_sht);
 }
 
 /**
diff --git a/drivers/ata/pata_cs5530.c b/drivers/ata/pata_cs5530.c
index db63e80..29642d5 100644
--- a/drivers/ata/pata_cs5530.c
+++ b/drivers/ata/pata_cs5530.c
@@ -160,18 +160,6 @@ static unsigned int cs5530_qc_issue_prot(struct ata_queued_cmd *qc)
 	return ata_qc_issue_prot(qc);
 }
 
-static int cs5530_pre_reset(struct ata_port *ap)
-{
-	ap->cbl = ATA_CBL_PATA40;
-	return ata_std_prereset(ap);
-}
-
-static void cs5530_error_handler(struct ata_port *ap)
-{
-	return ata_bmdma_drive_eh(ap, cs5530_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
-}
-
-
 static struct scsi_host_template cs5530_sht = {
 	.module			= THIS_MODULE,
 	.name			= DRV_NAME,
@@ -213,8 +201,9 @@ static struct ata_port_operations cs5530_port_ops = {
 
 	.freeze		= ata_bmdma_freeze,
 	.thaw		= ata_bmdma_thaw,
-	.error_handler	= cs5530_error_handler,
+	.error_handler	= ata_bmdma_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= ata_cable_40wire,
 
 	.qc_prep 	= ata_qc_prep,
 	.qc_issue	= cs5530_qc_issue_prot,
diff --git a/drivers/ata/pata_cs5535.c b/drivers/ata/pata_cs5535.c
index 1572e5c..08cccc9 100644
--- a/drivers/ata/pata_cs5535.c
+++ b/drivers/ata/pata_cs5535.c
@@ -70,36 +70,23 @@
 #define CS5535_BAD_PIO(timings) ( (timings&~0x80000000UL)==0x00009172 )
 
 /**
- *	cs5535_pre_reset	-	detect cable type
+ *	cs5535_cable_detect	-	detect cable type
  *	@ap: Port to detect on
  *
  *	Perform cable detection for ATA66 capable cable. Return a libata
  *	cable type.
  */
 
-static int cs5535_pre_reset(struct ata_port *ap)
+static int cs5535_cable_detect(struct ata_port *ap)
 {
 	u8 cable;
 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 
 	pci_read_config_byte(pdev, CS5535_CABLE_DETECT, &cable);
 	if (cable & 1)
-		ap->cbl = ATA_CBL_PATA80;
+		return ATA_CBL_PATA80;
 	else
-		ap->cbl = ATA_CBL_PATA40;
-	return ata_std_prereset(ap);
-}
-
-/**
- *	cs5535_error_handler		-	reset/probe
- *	@ap: Port to reset
- *
- *	Reset and configure a port
- */
-
-static void cs5535_error_handler(struct ata_port *ap)
-{
-	ata_bmdma_drive_eh(ap, cs5535_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
+		return ATA_CBL_PATA40;
 }
 
 /**
@@ -205,8 +192,9 @@ static struct ata_port_operations cs5535_port_ops = {
 
 	.freeze		= ata_bmdma_freeze,
 	.thaw		= ata_bmdma_thaw,
-	.error_handler	= cs5535_error_handler,
+	.error_handler	= ata_bmdma_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= cs5535_cable_detect,
 
 	.bmdma_setup 	= ata_bmdma_setup,
 	.bmdma_start 	= ata_bmdma_start,
diff --git a/drivers/ata/pata_cypress.c b/drivers/ata/pata_cypress.c
index f69dde5..6ec049c 100644
--- a/drivers/ata/pata_cypress.c
+++ b/drivers/ata/pata_cypress.c
@@ -41,17 +41,6 @@ enum {
 	CY82_INDEX_TIMEOUT	= 0x32
 };
 
-static int cy82c693_pre_reset(struct ata_port *ap)
-{
-	ap->cbl = ATA_CBL_PATA40;
-	return ata_std_prereset(ap);
-}
-
-static void cy82c693_error_handler(struct ata_port *ap)
-{
-	ata_bmdma_drive_eh(ap, cy82c693_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
-}
-
 /**
  *	cy82c693_set_piomode	-	set initial PIO mode data
  *	@ap: ATA interface
@@ -156,8 +145,9 @@ static struct ata_port_operations cy82c693_port_ops = {
 
 	.freeze		= ata_bmdma_freeze,
 	.thaw		= ata_bmdma_thaw,
-	.error_handler	= cy82c693_error_handler,
+	.error_handler	= ata_bmdma_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= ata_cable_40wire,
 
 	.bmdma_setup 	= ata_bmdma_setup,
 	.bmdma_start 	= ata_bmdma_start,
diff --git a/drivers/ata/pata_efar.c b/drivers/ata/pata_efar.c
index dac7a65..a321685 100644
--- a/drivers/ata/pata_efar.c
+++ b/drivers/ata/pata_efar.c
@@ -22,10 +22,10 @@
 #include <linux/ata.h>
 
 #define DRV_NAME	"pata_efar"
-#define DRV_VERSION	"0.4.3"
+#define DRV_VERSION	"0.4.4"
 
 /**
- *	efar_pre_reset	-	check for 40/80 pin
+ *	efar_pre_reset	-	Enable bits
  *	@ap: Port
  *
  *	Perform cable detection for the EFAR ATA interface. This is
@@ -38,18 +38,11 @@ static int efar_pre_reset(struct ata_port *ap)
 		{ 0x41U, 1U, 0x80UL, 0x80UL },	/* port 0 */
 		{ 0x43U, 1U, 0x80UL, 0x80UL },	/* port 1 */
 	};
-
 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
-	u8 tmp;
 
 	if (!pci_test_config_bits(pdev, &efar_enable_bits[ap->port_no]))
 		return -ENOENT;
 
-	pci_read_config_byte(pdev, 0x47, &tmp);
-	if (tmp & (2 >> ap->port_no))
-		ap->cbl = ATA_CBL_PATA40;
-	else
-		ap->cbl = ATA_CBL_PATA80;
 	return ata_std_prereset(ap);
 }
 
@@ -67,6 +60,25 @@ static void efar_error_handler(struct ata_port *ap)
 }
 
 /**
+ *	efar_cable_detect	-	check for 40/80 pin
+ *	@ap: Port
+ *
+ *	Perform cable detection for the EFAR ATA interface. This is
+ *	different to the PIIX arrangement
+ */
+
+static int efar_cable_detect(struct ata_port *ap)
+{
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+	u8 tmp;
+
+	pci_read_config_byte(pdev, 0x47, &tmp);
+	if (tmp & (2 >> ap->port_no))
+		return ATA_CBL_PATA40;
+	return ATA_CBL_PATA80;
+}
+
+/**
  *	efar_set_piomode - Initialize host controller PATA PIO timings
  *	@ap: Port whose timings we are configuring
  *	@adev: um
@@ -256,6 +268,7 @@ static const struct ata_port_operations efar_ops = {
 	.thaw			= ata_bmdma_thaw,
 	.error_handler		= efar_error_handler,
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
+	.cable_detect		= efar_cable_detect,
 
 	.bmdma_setup		= ata_bmdma_setup,
 	.bmdma_start		= ata_bmdma_start,
diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c
index baf35f8..93cfa6d 100644
--- a/drivers/ata/pata_hpt366.c
+++ b/drivers/ata/pata_hpt366.c
@@ -27,7 +27,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"pata_hpt366"
-#define DRV_VERSION	"0.6.0"
+#define DRV_VERSION	"0.6.1"
 
 struct hpt_clock {
 	u8	xfer_speed;
@@ -169,13 +169,12 @@ static int hpt_dma_blacklisted(const struct ata_device *dev, char *modestr, cons
 
 /**
  *	hpt366_filter	-	mode selection filter
- *	@ap: ATA interface
  *	@adev: ATA device
  *
  *	Block UDMA on devices that cause trouble with this controller.
  */
 
-static unsigned long hpt366_filter(const struct ata_port *ap, struct ata_device *adev, unsigned long mask)
+static unsigned long hpt366_filter(struct ata_device *adev, unsigned long mask)
 {
 	if (adev->class == ATA_DEV_ATA) {
 		if (hpt_dma_blacklisted(adev, "UDMA",  bad_ata33))
@@ -185,7 +184,7 @@ static unsigned long hpt366_filter(const struct ata_port *ap, struct ata_device
 		if (hpt_dma_blacklisted(adev, "UDMA4", bad_ata66_4))
 			mask &= ~(0x0F << ATA_SHIFT_UDMA);
 	}
-	return ata_pci_default_filter(ap, adev, mask);
+	return ata_pci_default_filter(adev, mask);
 }
 
 /**
@@ -210,24 +209,28 @@ static u32 hpt36x_find_mode(struct ata_port *ap, int speed)
 	return 0xffffffffU;	/* silence compiler warning */
 }
 
+static int hpt36x_cable_detect(struct ata_port *ap)
+{
+	u8 ata66;
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+
+	pci_read_config_byte(pdev, 0x5A, &ata66);
+	if (ata66 & (1 << ap->port_no))
+		return ATA_CBL_PATA40;
+	return ATA_CBL_PATA80;
+}
+
 static int hpt36x_pre_reset(struct ata_port *ap)
 {
 	static const struct pci_bits hpt36x_enable_bits[] = {
 		{ 0x50, 1, 0x04, 0x04 },
 		{ 0x54, 1, 0x04, 0x04 }
 	};
-
-	u8 ata66;
 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 
 	if (!pci_test_config_bits(pdev, &hpt36x_enable_bits[ap->port_no]))
 		return -ENOENT;
 
-	pci_read_config_byte(pdev, 0x5A, &ata66);
-	if (ata66 & (1 << ap->port_no))
-		ap->cbl = ATA_CBL_PATA40;
-	else
-		ap->cbl = ATA_CBL_PATA80;
 	return ata_std_prereset(ap);
 }
 
@@ -354,6 +357,7 @@ static struct ata_port_operations hpt366_port_ops = {
 	.thaw		= ata_bmdma_thaw,
 	.error_handler	= hpt36x_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= hpt36x_cable_detect,
 
 	.bmdma_setup 	= ata_bmdma_setup,
 	.bmdma_start 	= ata_bmdma_start,
diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c
index f331eee..41d83129 100644
--- a/drivers/ata/pata_hpt37x.c
+++ b/drivers/ata/pata_hpt37x.c
@@ -8,6 +8,7 @@
  * Copyright (C) 1999-2003		Andre Hedrick <andre@linux-ide.org>
  * Portions Copyright (C) 2001	        Sun Microsystems, Inc.
  * Portions Copyright (C) 2003		Red Hat Inc
+ * Portions Copyright (C) 2005-2006	MontaVista Software, Inc.
  *
  * TODO
  *	PLL mode
@@ -25,7 +26,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"pata_hpt37x"
-#define DRV_VERSION	"0.6.0"
+#define DRV_VERSION	"0.6.5"
 
 struct hpt_clock {
 	u8	xfer_speed;
@@ -61,201 +62,75 @@ struct hpt_chip {
  * 31     FIFO enable.
  */
 
-/* from highpoint documentation. these are old values */
-static const struct hpt_clock hpt370_timings_33[] = {
-/*	{	XFER_UDMA_5,	0x1A85F442,	0x16454e31	}, */
-	{	XFER_UDMA_5,	0x16454e31	},
-	{	XFER_UDMA_4,	0x16454e31	},
-	{	XFER_UDMA_3,	0x166d4e31	},
-	{	XFER_UDMA_2,	0x16494e31	},
-	{	XFER_UDMA_1,	0x164d4e31	},
-	{	XFER_UDMA_0,	0x16514e31	},
-
-	{	XFER_MW_DMA_2,	0x26514e21	},
-	{	XFER_MW_DMA_1,	0x26514e33	},
-	{	XFER_MW_DMA_0,	0x26514e97	},
-
-	{	XFER_PIO_4,	0x06514e21	},
-	{	XFER_PIO_3,	0x06514e22	},
-	{	XFER_PIO_2,	0x06514e33	},
-	{	XFER_PIO_1,	0x06914e43	},
-	{	XFER_PIO_0,	0x06914e57	},
-	{	0,		0x06514e57	}
+static struct hpt_clock hpt37x_timings_33[] = {
+	{ XFER_UDMA_6,		0x12446231 },	/* 0x12646231 ?? */
+	{ XFER_UDMA_5,		0x12446231 },
+	{ XFER_UDMA_4,		0x12446231 },
+	{ XFER_UDMA_3,		0x126c6231 },
+	{ XFER_UDMA_2,		0x12486231 },
+	{ XFER_UDMA_1,		0x124c6233 },
+	{ XFER_UDMA_0,		0x12506297 },
+
+	{ XFER_MW_DMA_2,	0x22406c31 },
+	{ XFER_MW_DMA_1,	0x22406c33 },
+	{ XFER_MW_DMA_0,	0x22406c97 },
+
+	{ XFER_PIO_4,		0x06414e31 },
+	{ XFER_PIO_3,		0x06414e42 },
+	{ XFER_PIO_2,		0x06414e53 },
+	{ XFER_PIO_1,		0x06814e93 },
+	{ XFER_PIO_0,		0x06814ea7 }
 };
 
-static const struct hpt_clock hpt370_timings_66[] = {
-	{	XFER_UDMA_5,	0x14846231	},
-	{	XFER_UDMA_4,	0x14886231	},
-	{	XFER_UDMA_3,	0x148c6231	},
-	{	XFER_UDMA_2,	0x148c6231	},
-	{	XFER_UDMA_1,	0x14906231	},
-	{	XFER_UDMA_0,	0x14986231	},
-
-	{	XFER_MW_DMA_2,	0x26514e21	},
-	{	XFER_MW_DMA_1,	0x26514e33	},
-	{	XFER_MW_DMA_0,	0x26514e97	},
-
-	{	XFER_PIO_4,	0x06514e21	},
-	{	XFER_PIO_3,	0x06514e22	},
-	{	XFER_PIO_2,	0x06514e33	},
-	{	XFER_PIO_1,	0x06914e43	},
-	{	XFER_PIO_0,	0x06914e57	},
-	{	0,		0x06514e57	}
+static struct hpt_clock hpt37x_timings_50[] = {
+	{ XFER_UDMA_6,		0x12848242 },
+	{ XFER_UDMA_5,		0x12848242 },
+	{ XFER_UDMA_4,		0x12ac8242 },
+	{ XFER_UDMA_3,		0x128c8242 },
+	{ XFER_UDMA_2,		0x120c8242 },
+	{ XFER_UDMA_1,		0x12148254 },
+	{ XFER_UDMA_0,		0x121882ea },
+
+	{ XFER_MW_DMA_2,	0x22808242 },
+	{ XFER_MW_DMA_1,	0x22808254 },
+	{ XFER_MW_DMA_0,	0x228082ea },
+
+	{ XFER_PIO_4,		0x0a81f442 },
+	{ XFER_PIO_3,		0x0a81f443 },
+	{ XFER_PIO_2,		0x0a81f454 },
+	{ XFER_PIO_1,		0x0ac1f465 },
+	{ XFER_PIO_0,		0x0ac1f48a }
 };
 
-/* these are the current (4 sep 2001) timings from highpoint */
-static const struct hpt_clock hpt370a_timings_33[] = {
-	{	XFER_UDMA_5,	0x12446231	},
-	{	XFER_UDMA_4,	0x12446231	},
-	{	XFER_UDMA_3,	0x126c6231	},
-	{	XFER_UDMA_2,	0x12486231	},
-	{	XFER_UDMA_1,	0x124c6233	},
-	{	XFER_UDMA_0,	0x12506297	},
-
-	{	XFER_MW_DMA_2,	0x22406c31	},
-	{	XFER_MW_DMA_1,	0x22406c33	},
-	{	XFER_MW_DMA_0,	0x22406c97	},
-
-	{	XFER_PIO_4,	0x06414e31	},
-	{	XFER_PIO_3,	0x06414e42	},
-	{	XFER_PIO_2,	0x06414e53	},
-	{	XFER_PIO_1,	0x06814e93	},
-	{	XFER_PIO_0,	0x06814ea7	},
-	{	0,		0x06814ea7	}
+static struct hpt_clock hpt37x_timings_66[] = {
+	{ XFER_UDMA_6,		0x1c869c62 },
+	{ XFER_UDMA_5,		0x1cae9c62 },	/* 0x1c8a9c62 */
+	{ XFER_UDMA_4,		0x1c8a9c62 },
+	{ XFER_UDMA_3,		0x1c8e9c62 },
+	{ XFER_UDMA_2,		0x1c929c62 },
+	{ XFER_UDMA_1,		0x1c9a9c62 },
+	{ XFER_UDMA_0,		0x1c829c62 },
+
+	{ XFER_MW_DMA_2,	0x2c829c62 },
+	{ XFER_MW_DMA_1,	0x2c829c66 },
+	{ XFER_MW_DMA_0,	0x2c829d2e },
+
+	{ XFER_PIO_4,		0x0c829c62 },
+	{ XFER_PIO_3,		0x0c829c84 },
+	{ XFER_PIO_2,		0x0c829ca6 },
+	{ XFER_PIO_1,		0x0d029d26 },
+	{ XFER_PIO_0,		0x0d029d5e }
 };
 
-/* 2x 33MHz timings */
-static const struct hpt_clock hpt370a_timings_66[] = {
-	{	XFER_UDMA_5,	0x1488e673	},
-	{	XFER_UDMA_4,	0x1488e673	},
-	{	XFER_UDMA_3,	0x1498e673	},
-	{	XFER_UDMA_2,	0x1490e673	},
-	{	XFER_UDMA_1,	0x1498e677	},
-	{	XFER_UDMA_0,	0x14a0e73f	},
-
-	{	XFER_MW_DMA_2,	0x2480fa73	},
-	{	XFER_MW_DMA_1,	0x2480fa77	},
-	{	XFER_MW_DMA_0,	0x2480fb3f	},
-
-	{	XFER_PIO_4,	0x0c82be73	},
-	{	XFER_PIO_3,	0x0c82be95	},
-	{	XFER_PIO_2,	0x0c82beb7	},
-	{	XFER_PIO_1,	0x0d02bf37	},
-	{	XFER_PIO_0,	0x0d02bf5f	},
-	{	0,		0x0d02bf5f	}
-};
-
-static const struct hpt_clock hpt370a_timings_50[] = {
-	{	XFER_UDMA_5,	0x12848242	},
-	{	XFER_UDMA_4,	0x12ac8242	},
-	{	XFER_UDMA_3,	0x128c8242	},
-	{	XFER_UDMA_2,	0x120c8242	},
-	{	XFER_UDMA_1,	0x12148254	},
-	{	XFER_UDMA_0,	0x121882ea	},
-
-	{	XFER_MW_DMA_2,	0x22808242	},
-	{	XFER_MW_DMA_1,	0x22808254	},
-	{	XFER_MW_DMA_0,	0x228082ea	},
-
-	{	XFER_PIO_4,	0x0a81f442	},
-	{	XFER_PIO_3,	0x0a81f443	},
-	{	XFER_PIO_2,	0x0a81f454	},
-	{	XFER_PIO_1,	0x0ac1f465	},
-	{	XFER_PIO_0,	0x0ac1f48a	},
-	{	0,		0x0ac1f48a	}
-};
-
-static const struct hpt_clock hpt372_timings_33[] = {
-	{	XFER_UDMA_6,	0x1c81dc62	},
-	{	XFER_UDMA_5,	0x1c6ddc62	},
-	{	XFER_UDMA_4,	0x1c8ddc62	},
-	{	XFER_UDMA_3,	0x1c8edc62	},	/* checkme */
-	{	XFER_UDMA_2,	0x1c91dc62	},
-	{	XFER_UDMA_1,	0x1c9adc62	},	/* checkme */
-	{	XFER_UDMA_0,	0x1c82dc62	},	/* checkme */
-
-	{	XFER_MW_DMA_2,	0x2c829262	},
-	{	XFER_MW_DMA_1,	0x2c829266	},	/* checkme */
-	{	XFER_MW_DMA_0,	0x2c82922e	},	/* checkme */
-
-	{	XFER_PIO_4,	0x0c829c62	},
-	{	XFER_PIO_3,	0x0c829c84	},
-	{	XFER_PIO_2,	0x0c829ca6	},
-	{	XFER_PIO_1,	0x0d029d26	},
-	{	XFER_PIO_0,	0x0d029d5e	},
-	{	0,		0x0d029d5e	}
-};
-
-static const struct hpt_clock hpt372_timings_50[] = {
-	{	XFER_UDMA_5,	0x12848242	},
-	{	XFER_UDMA_4,	0x12ac8242	},
-	{	XFER_UDMA_3,	0x128c8242	},
-	{	XFER_UDMA_2,	0x120c8242	},
-	{	XFER_UDMA_1,	0x12148254	},
-	{	XFER_UDMA_0,	0x121882ea	},
-
-	{	XFER_MW_DMA_2,	0x22808242	},
-	{	XFER_MW_DMA_1,	0x22808254	},
-	{	XFER_MW_DMA_0,	0x228082ea	},
-
-	{	XFER_PIO_4,	0x0a81f442	},
-	{	XFER_PIO_3,	0x0a81f443	},
-	{	XFER_PIO_2,	0x0a81f454	},
-	{	XFER_PIO_1,	0x0ac1f465	},
-	{	XFER_PIO_0,	0x0ac1f48a	},
-	{	0,		0x0a81f443	}
-};
-
-static const struct hpt_clock hpt372_timings_66[] = {
-	{	XFER_UDMA_6,	0x1c869c62	},
-	{	XFER_UDMA_5,	0x1cae9c62	},
-	{	XFER_UDMA_4,	0x1c8a9c62	},
-	{	XFER_UDMA_3,	0x1c8e9c62	},
-	{	XFER_UDMA_2,	0x1c929c62	},
-	{	XFER_UDMA_1,	0x1c9a9c62	},
-	{	XFER_UDMA_0,	0x1c829c62	},
-
-	{	XFER_MW_DMA_2,	0x2c829c62	},
-	{	XFER_MW_DMA_1,	0x2c829c66	},
-	{	XFER_MW_DMA_0,	0x2c829d2e	},
-
-	{	XFER_PIO_4,	0x0c829c62	},
-	{	XFER_PIO_3,	0x0c829c84	},
-	{	XFER_PIO_2,	0x0c829ca6	},
-	{	XFER_PIO_1,	0x0d029d26	},
-	{	XFER_PIO_0,	0x0d029d5e	},
-	{	0,		0x0d029d26	}
-};
-
-static const struct hpt_clock hpt374_timings_33[] = {
-	{	XFER_UDMA_6,	0x12808242	},
-	{	XFER_UDMA_5,	0x12848242	},
-	{	XFER_UDMA_4,	0x12ac8242	},
-	{	XFER_UDMA_3,	0x128c8242	},
-	{	XFER_UDMA_2,	0x120c8242	},
-	{	XFER_UDMA_1,	0x12148254	},
-	{	XFER_UDMA_0,	0x121882ea	},
-
-	{	XFER_MW_DMA_2,	0x22808242	},
-	{	XFER_MW_DMA_1,	0x22808254	},
-	{	XFER_MW_DMA_0,	0x228082ea	},
-
-	{	XFER_PIO_4,	0x0a81f442	},
-	{	XFER_PIO_3,	0x0a81f443	},
-	{	XFER_PIO_2,	0x0a81f454	},
-	{	XFER_PIO_1,	0x0ac1f465	},
-	{	XFER_PIO_0,	0x0ac1f48a	},
-	{	0,		0x06814e93	}
-};
 
 static const struct hpt_chip hpt370 = {
 	"HPT370",
 	48,
 	{
-		hpt370_timings_33,
+		hpt37x_timings_33,
 		NULL,
 		NULL,
-		hpt370_timings_66
+		NULL
 	}
 };
 
@@ -263,10 +138,10 @@ static const struct hpt_chip hpt370a = {
 	"HPT370A",
 	48,
 	{
-		hpt370a_timings_33,
+		hpt37x_timings_33,
 		NULL,
-		hpt370a_timings_50,
-		hpt370a_timings_66
+		hpt37x_timings_50,
+		NULL
 	}
 };
 
@@ -274,10 +149,10 @@ static const struct hpt_chip hpt372 = {
 	"HPT372",
 	55,
 	{
-		hpt372_timings_33,
+		hpt37x_timings_33,
 		NULL,
-		hpt372_timings_50,
-		hpt372_timings_66
+		hpt37x_timings_50,
+		hpt37x_timings_66
 	}
 };
 
@@ -285,10 +160,10 @@ static const struct hpt_chip hpt302 = {
 	"HPT302",
 	66,
 	{
-		hpt372_timings_33,
+		hpt37x_timings_33,
 		NULL,
-		hpt372_timings_50,
-		hpt372_timings_66
+		hpt37x_timings_50,
+		hpt37x_timings_66
 	}
 };
 
@@ -296,10 +171,10 @@ static const struct hpt_chip hpt371 = {
 	"HPT371",
 	66,
 	{
-		hpt372_timings_33,
+		hpt37x_timings_33,
 		NULL,
-		hpt372_timings_50,
-		hpt372_timings_66
+		hpt37x_timings_50,
+		hpt37x_timings_66
 	}
 };
 
@@ -307,10 +182,10 @@ static const struct hpt_chip hpt372a = {
 	"HPT372A",
 	66,
 	{
-		hpt372_timings_33,
+		hpt37x_timings_33,
 		NULL,
-		hpt372_timings_50,
-		hpt372_timings_66
+		hpt37x_timings_50,
+		hpt37x_timings_66
 	}
 };
 
@@ -318,7 +193,7 @@ static const struct hpt_chip hpt374 = {
 	"HPT374",
 	48,
 	{
-		hpt374_timings_33,
+		hpt37x_timings_33,
 		NULL,
 		NULL,
 		NULL
@@ -397,13 +272,12 @@ static const char *bad_ata100_5[] = {
 
 /**
  *	hpt370_filter	-	mode selection filter
- *	@ap: ATA interface
  *	@adev: ATA device
  *
  *	Block UDMA on devices that cause trouble with this controller.
  */
 
-static unsigned long hpt370_filter(const struct ata_port *ap, struct ata_device *adev, unsigned long mask)
+static unsigned long hpt370_filter(struct ata_device *adev, unsigned long mask)
 {
 	if (adev->class == ATA_DEV_ATA) {
 		if (hpt_dma_blacklisted(adev, "UDMA", bad_ata33))
@@ -411,24 +285,23 @@ static unsigned long hpt370_filter(const struct ata_port *ap, struct ata_device
 		if (hpt_dma_blacklisted(adev, "UDMA100", bad_ata100_5))
 			mask &= ~(0x1F << ATA_SHIFT_UDMA);
 	}
-	return ata_pci_default_filter(ap, adev, mask);
+	return ata_pci_default_filter(adev, mask);
 }
 
 /**
  *	hpt370a_filter	-	mode selection filter
- *	@ap: ATA interface
  *	@adev: ATA device
  *
  *	Block UDMA on devices that cause trouble with this controller.
  */
 
-static unsigned long hpt370a_filter(const struct ata_port *ap, struct ata_device *adev, unsigned long mask)
+static unsigned long hpt370a_filter(struct ata_device *adev, unsigned long mask)
 {
 	if (adev->class != ATA_DEV_ATA) {
 		if (hpt_dma_blacklisted(adev, "UDMA100", bad_ata100_5))
 			mask &= ~ (0x1F << ATA_SHIFT_UDMA);
 	}
-	return ata_pci_default_filter(ap, adev, mask);
+	return ata_pci_default_filter(adev, mask);
 }
 
 /**
@@ -462,8 +335,7 @@ static int hpt37x_pre_reset(struct ata_port *ap)
 		ap->cbl = ATA_CBL_PATA80;
 
 	/* Reset the state machine */
-	pci_write_config_byte(pdev, 0x50, 0x37);
-	pci_write_config_byte(pdev, 0x54, 0x37);
+	pci_write_config_byte(pdev, 0x50 + 4 * ap->port_no, 0x37);
 	udelay(100);
 
 	return ata_std_prereset(ap);
@@ -513,8 +385,7 @@ static int hpt374_pre_reset(struct ata_port *ap)
 		ap->cbl = ATA_CBL_PATA80;
 
 	/* Reset the state machine */
-	pci_write_config_byte(pdev, 0x50, 0x37);
-	pci_write_config_byte(pdev, 0x54, 0x37);
+	pci_write_config_byte(pdev, 0x50 + 4 * ap->port_no, 0x37);
 	udelay(100);
 
 	return ata_std_prereset(ap);
@@ -1032,6 +903,24 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 		.udma_mask = 0x3f,
 		.port_ops = &hpt370a_port_ops
 	};
+	/* HPT370 - UDMA100 */
+	static struct ata_port_info info_hpt370_33 = {
+		.sht = &hpt37x_sht,
+		.flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST,
+		.pio_mask = 0x1f,
+		.mwdma_mask = 0x07,
+		.udma_mask = 0x0f,
+		.port_ops = &hpt370_port_ops
+	};
+	/* HPT370A - UDMA100 */
+	static struct ata_port_info info_hpt370a_33 = {
+		.sht = &hpt37x_sht,
+		.flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST,
+		.pio_mask = 0x1f,
+		.mwdma_mask = 0x07,
+		.udma_mask = 0x0f,
+		.port_ops = &hpt370a_port_ops
+	};
 	/* HPT371, 372 and friends - UDMA133 */
 	static struct ata_port_info info_hpt372 = {
 		.sht = &hpt37x_sht,
@@ -1067,7 +956,11 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 
 	u8 irqmask;
 	u32 class_rev;
+	u8 mcr1;
 	u32 freq;
+	int prefer_dpll = 1;
+	
+	unsigned long iobase = pci_resource_start(dev, 4);
 
 	const struct hpt_chip *chip_table;
 	int clock_slot;
@@ -1088,10 +981,12 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 			case 3:
 				port = &info_hpt370;
 				chip_table = &hpt370;
+				prefer_dpll = 0;
 				break;
 			case 4:
 				port = &info_hpt370a;
 				chip_table = &hpt370a;
+				prefer_dpll = 0;
 				break;
 			case 5:
 				port = &info_hpt372;
@@ -1119,8 +1014,16 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 				chip_table = &hpt302;
 				break;
 			case PCI_DEVICE_ID_TTI_HPT371:
+				if (class_rev > 1)
+					return -ENODEV;
 				port = &info_hpt372;
 				chip_table = &hpt371;
+				/* Single channel device, master is not present
+				   but the BIOS (or us for non x86) must mark it
+				   absent */
+				pci_read_config_byte(dev, 0x50, &mcr1);
+				mcr1 &= ~0x04;
+				pci_write_config_byte(dev, 0x50, mcr1);
 				break;
 			case PCI_DEVICE_ID_TTI_HPT374:
 				chip_table = &hpt374;
@@ -1150,8 +1053,18 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 	 */
 
 	pci_write_config_byte(dev, 0x5b, 0x23);
+	
+	/*
+	 * HighPoint does this for HPT372A.
+	 * NOTE: This register is only writeable via I/O space.
+	 */
+	if (chip_table == &hpt372a)
+		outb(0x0e, iobase + 0x9c);
 
-	pci_read_config_dword(dev, 0x70, &freq);
+	/* Some devices do not let this value be accessed via PCI space
+	   according to the old driver */
+
+	freq = inl(iobase + 0x90);
 	if ((freq >> 12) != 0xABCDE) {
 		int i;
 		u8 sr;
@@ -1162,7 +1075,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 		/* This is the process the HPT371 BIOS is reported to use */
 		for(i = 0; i < 128; i++) {
 			pci_read_config_byte(dev, 0x78, &sr);
-			total += sr;
+			total += sr & 0x1FF;
 			udelay(15);
 		}
 		freq = total / 128;
@@ -1173,15 +1086,27 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 	 *	Turn the frequency check into a band and then find a timing
 	 *	table to match it.
 	 */
-
+	 
 	clock_slot = hpt37x_clock_slot(freq, chip_table->base);
-	if (chip_table->clocks[clock_slot] == NULL) {
+	if (chip_table->clocks[clock_slot] == NULL || prefer_dpll) {
 		/*
 		 *	We need to try PLL mode instead
+		 *
+		 *	For non UDMA133 capable devices we should
+		 *	use a 50MHz DPLL by choice
 		 */
-		unsigned int f_low = (MHz[clock_slot] * chip_table->base) / 192;
-		unsigned int f_high = f_low + 2;
+		unsigned int f_low, f_high;
 		int adjust;
+		
+		clock_slot = 2;
+		if (port->udma_mask & 0xE0)
+			clock_slot = 3;
+		
+		f_low = (MHz[clock_slot] * chip_table->base) / 192;
+		f_high = f_low + 2;
+
+		/* Select the DPLL clock. */
+		pci_write_config_byte(dev, 0x5b, 0x21);
 
 		for(adjust = 0; adjust < 8; adjust++) {
 			if (hpt37x_calibrate_dpll(dev))
@@ -1197,25 +1122,27 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 			printk(KERN_WARNING "hpt37x: DPLL did not stabilize.\n");
 			return -ENODEV;
 		}
-		/* Check if this works for all cases */
-		port->private_data = (void *)hpt370_timings_66;
+		if (clock_slot == 3)
+			port->private_data = (void *)hpt37x_timings_66;
+		else
+			port->private_data = (void *)hpt37x_timings_50;
 
 		printk(KERN_INFO "hpt37x: Bus clock %dMHz, using DPLL.\n", MHz[clock_slot]);
 	} else {
 		port->private_data = (void *)chip_table->clocks[clock_slot];
 		/*
-		 *	Perform a final fixup. The 371 and 372 clock determines
-		 *	if UDMA133 is available.
-		 */
-
-		if (clock_slot == 2 && chip_table == &hpt372) {	/* 50Mhz */
-			printk(KERN_WARNING "pata_hpt37x: No UDMA133 support available with 50MHz bus clock.\n");
-			if (port == &info_hpt372)
-				port = &info_hpt372_50;
-			else BUG();
-		}
+		 *	Perform a final fixup. Note that we will have used the
+		 *	DPLL on the HPT372 which means we don't have to worry
+		 *	about lack of UDMA133 support on lower clocks
+ 		 */
+
+		if (clock_slot < 2 && port == &info_hpt370)
+			port = &info_hpt370_33;
+		if (clock_slot < 2 && port == &info_hpt370a)
+			port = &info_hpt370a_33;
 		printk(KERN_INFO "hpt37x: %s: Bus clock %dMHz.\n", chip_table->name, MHz[clock_slot]);
 	}
+
 	port_info[0] = port_info[1] = port;
 	/* Now kick off ATA set up */
 	return ata_pci_init_one(dev, port_info, 2);
diff --git a/drivers/ata/pata_hpt3x2n.c b/drivers/ata/pata_hpt3x2n.c
index 65f2e18..6a34521 100644
--- a/drivers/ata/pata_hpt3x2n.c
+++ b/drivers/ata/pata_hpt3x2n.c
@@ -8,10 +8,10 @@
  * Copyright (C) 1999-2003		Andre Hedrick <andre@linux-ide.org>
  * Portions Copyright (C) 2001	        Sun Microsystems, Inc.
  * Portions Copyright (C) 2003		Red Hat Inc
+ * Portions Copyright (C) 2005-2006	MontaVista Software, Inc.
  *
  *
  * TODO
- *	371N
  *	Work out best PLL policy
  */
 
@@ -25,7 +25,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"pata_hpt3x2n"
-#define DRV_VERSION	"0.3.2"
+#define DRV_VERSION	"0.3.3"
 
 enum {
 	HPT_PCI_FAST	=	(1 << 31),
@@ -115,14 +115,13 @@ static u32 hpt3x2n_find_mode(struct ata_port *ap, int speed)
 }
 
 /**
- *	hpt3x2n_pre_reset	-	reset the hpt3x2n bus
- *	@ap: ATA port to reset
+ *	hpt3x2n_cable_detect	-	Detect the cable type
+ *	@ap: ATA port to detect on
  *
- *	Perform the initial reset handling for the 3x2n series controllers.
- *	Reset the hardware and state machine, obtain the cable type.
+ *	Return the cable type attached to this port
  */
 
-static int hpt3xn_pre_reset(struct ata_port *ap)
+static int hpt3x2n_cable_detect(struct ata_port *ap)
 {
 	u8 scr2, ata66;
 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
@@ -135,15 +134,26 @@ static int hpt3xn_pre_reset(struct ata_port *ap)
 	pci_write_config_byte(pdev, 0x5B, scr2);
 
 	if (ata66 & (1 << ap->port_no))
-		ap->cbl = ATA_CBL_PATA40;
+		return ATA_CBL_PATA40;
 	else
-		ap->cbl = ATA_CBL_PATA80;
+		return ATA_CBL_PATA80;
+}
+
+/**
+ *	hpt3x2n_pre_reset	-	reset the hpt3x2n bus
+ *	@ap: ATA port to reset
+ *	@deadline: deadline jiffies for the operation
+ *
+ *	Perform the initial reset handling for the 3x2n series controllers.
+ *	Reset the hardware and state machine,
+ */
 
+static int hpt3xn_pre_reset(struct ata_port *ap)
+{
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 	/* Reset the state machine */
-	pci_write_config_byte(pdev, 0x50, 0x37);
-	pci_write_config_byte(pdev, 0x54, 0x37);
+	pci_write_config_byte(pdev, 0x50 + 4 * ap->port_no, 0x37);
 	udelay(100);
-
 	return ata_std_prereset(ap);
 }
 
@@ -364,6 +374,7 @@ static struct ata_port_operations hpt3x2n_port_ops = {
 	.thaw		= ata_bmdma_thaw,
 	.error_handler	= hpt3x2n_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= hpt3x2n_cable_detect,
 
 	.bmdma_setup 	= ata_bmdma_setup,
 	.bmdma_start 	= ata_bmdma_start,
@@ -422,8 +433,9 @@ static int hpt3x2n_pci_clock(struct pci_dev *pdev)
 {
 	unsigned long freq;
 	u32 fcnt;
+	unsigned long iobase = pci_resource_start(pdev, 4);
 
-	pci_read_config_dword(pdev, 0x70/*CHECKME*/, &fcnt);
+	fcnt = inl(iobase + 0x90);	/* Not PCI readable for some chips */
 	if ((fcnt >> 12) != 0xABCDE) {
 		printk(KERN_WARNING "hpt3xn: BIOS clock data not set.\n");
 		return 33;	/* Not BIOS set */
@@ -492,6 +504,7 @@ static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 	unsigned int pci_mhz;
 	unsigned int f_low, f_high;
 	int adjust;
+	unsigned long iobase = pci_resource_start(dev, 4);
 
 	pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev);
 	class_rev &= 0xFF;
@@ -501,6 +514,11 @@ static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 			if (class_rev < 6)
 				return -ENODEV;
 			break;
+		case PCI_DEVICE_ID_TTI_HPT371:
+			if (class_rev < 2)
+				return -ENODEV;
+			/* 371N if rev > 1 */
+			break;
 		case PCI_DEVICE_ID_TTI_HPT372:
 			/* 372N if rev >= 1*/
 			if (class_rev == 0)
@@ -528,6 +546,19 @@ static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 	irqmask &= ~0x10;
 	pci_write_config_byte(dev, 0x5a, irqmask);
 
+	/*
+	 * HPT371 chips physically have only one channel, the secondary one,
+	 * but the primary channel registers do exist!  Go figure...
+	 * So,  we manually disable the non-existing channel here
+	 * (if the BIOS hasn't done this already).
+	 */
+	if (dev->device == PCI_DEVICE_ID_TTI_HPT371) {
+		u8 mcr1;
+		pci_read_config_byte(dev, 0x50, &mcr1);
+		mcr1 &= ~0x04;
+		pci_write_config_byte(dev, 0x50, mcr1);
+	}
+
 	/* Tune the PLL. HPT recommend using 75 for SATA, 66 for UDMA133 or
 	   50 for UDMA100. Right now we always use 66 */
 
@@ -546,14 +577,24 @@ static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 			break;
 		pci_write_config_dword(dev, 0x5C, (f_high << 16) | f_low);
 	}
-	if (adjust == 8)
-		printk(KERN_WARNING "hpt3xn: DPLL did not stabilize.\n");
+	if (adjust == 8) {
+		printk(KERN_WARNING "hpt3x2n: DPLL did not stabilize.\n");
+		return -ENODEV;
+	}
 
 	/* Set our private data up. We only need a few flags so we use
 	   it directly */
 	port->private_data = NULL;
-	if (pci_mhz > 60)
+	if (pci_mhz > 60) {
 		port->private_data = (void *)PCI66;
+		/*
+		 * On  HPT371N, if ATA clock is 66 MHz we must set bit 2 in
+		 * the MISC. register to stretch the UltraDMA Tss timing.
+		 * NOTE: This register is only writeable via I/O space.
+		 */
+		if (dev->device == PCI_DEVICE_ID_TTI_HPT371)
+			outb(inb(iobase + 0x9c) | 0x04, iobase + 0x9c);
+	}
 
 	/* Now kick off ATA set up */
 	port_info[0] = port_info[1] = port;
@@ -562,6 +603,7 @@ static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 
 static const struct pci_device_id hpt3x2n[] = {
 	{ PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT366), },
+	{ PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT371), },
 	{ PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT372), },
 	{ PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT302), },
 	{ PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT372N), },
diff --git a/drivers/ata/pata_hpt3x3.c b/drivers/ata/pata_hpt3x3.c
index 813485c..ac28ec8 100644
--- a/drivers/ata/pata_hpt3x3.c
+++ b/drivers/ata/pata_hpt3x3.c
@@ -25,25 +25,6 @@
 #define DRV_NAME	"pata_hpt3x3"
 #define DRV_VERSION	"0.4.2"
 
-static int hpt3x3_probe_init(struct ata_port *ap)
-{
-	ap->cbl = ATA_CBL_PATA40;
-	return ata_std_prereset(ap);
-}
-
-/**
- *	hpt3x3_probe_reset	-	reset the hpt3x3 bus
- *	@ap: ATA port to reset
- *
- *	Perform the housekeeping when doing an ATA bus reeset. We just
- *	need to force the cable type.
- */
-
-static void hpt3x3_error_handler(struct ata_port *ap)
-{
-	return ata_bmdma_drive_eh(ap, hpt3x3_probe_init, ata_std_softreset, NULL, ata_std_postreset);
-}
-
 /**
  *	hpt3x3_set_piomode		-	PIO setup
  *	@ap: ATA interface
@@ -139,8 +120,9 @@ static struct ata_port_operations hpt3x3_port_ops = {
 
 	.freeze		= ata_bmdma_freeze,
 	.thaw		= ata_bmdma_thaw,
-	.error_handler	= hpt3x3_error_handler,
+	.error_handler	= ata_bmdma_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= ata_cable_40wire,
 
 	.bmdma_setup 	= ata_bmdma_setup,
 	.bmdma_start 	= ata_bmdma_start,
diff --git a/drivers/ata/pata_isapnp.c b/drivers/ata/pata_isapnp.c
index 1a61cc8..d042efd 100644
--- a/drivers/ata/pata_isapnp.c
+++ b/drivers/ata/pata_isapnp.c
@@ -49,13 +49,13 @@ static struct ata_port_operations isapnp_port_ops = {
 	.thaw		= ata_bmdma_thaw,
 	.error_handler	= ata_bmdma_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= ata_cable_40wire,
 
 	.qc_prep 	= ata_qc_prep,
 	.qc_issue	= ata_qc_issue_prot,
 
 	.data_xfer	= ata_data_xfer,
 
-	.irq_handler	= ata_interrupt,
 	.irq_clear	= ata_bmdma_irq_clear,
 	.irq_on		= ata_irq_on,
 	.irq_ack	= ata_irq_ack,
@@ -74,8 +74,10 @@ static struct ata_port_operations isapnp_port_ops = {
 
 static int isapnp_init_one(struct pnp_dev *idev, const struct pnp_device_id *dev_id)
 {
-	struct ata_probe_ent ae;
+	struct ata_host *host;
+	struct ata_port *ap;
 	void __iomem *cmd_addr, *ctl_addr;
+	int rc;
 
 	if (pnp_port_valid(idev, 0) == 0)
 		return -ENODEV;
@@ -84,34 +86,36 @@ static int isapnp_init_one(struct pnp_dev *idev, const struct pnp_device_id *dev
 	if (pnp_irq_valid(idev, 0) == 0)
 		return -ENODEV;
 
+	/* allocate host */
+	host = ata_host_alloc(&idev->dev, 1);
+	if (!host)
+		return -ENOMEM;
+
+	/* acquire resources and fill host */
 	cmd_addr = devm_ioport_map(&idev->dev, pnp_port_start(idev, 0), 8);
 	if (!cmd_addr)
 		return -ENOMEM;
 
-	memset(&ae, 0, sizeof(struct ata_probe_ent));
-	INIT_LIST_HEAD(&ae.node);
-	ae.dev = &idev->dev;
-	ae.port_ops = &isapnp_port_ops;
-	ae.sht = &isapnp_sht;
-	ae.n_ports = 1;
-	ae.pio_mask = 1;		/* ISA so PIO 0 cycles */
-	ae.irq = pnp_irq(idev, 0);
-	ae.irq_flags = 0;
-	ae.port_flags = ATA_FLAG_SLAVE_POSS;
-	ae.port[0].cmd_addr = cmd_addr;
+	ap = host->ports[0];
+
+	ap->ops = &isapnp_port_ops;
+	ap->pio_mask = 1;
+	ap->flags |= ATA_FLAG_SLAVE_POSS;
+
+	ap->ioaddr.cmd_addr = cmd_addr;
 
 	if (pnp_port_valid(idev, 1) == 0) {
 		ctl_addr = devm_ioport_map(&idev->dev,
 					   pnp_port_start(idev, 1), 1);
-		ae.port[0].altstatus_addr = ctl_addr;
-		ae.port[0].ctl_addr = ctl_addr;
-		ae.port_flags |= ATA_FLAG_SRST;
+		ap->ioaddr.altstatus_addr = ctl_addr;
+		ap->ioaddr.ctl_addr = ctl_addr;
 	}
-	ata_std_ports(&ae.port[0]);
 
-	if (ata_device_add(&ae) == 0)
-		return -ENODEV;
-	return 0;
+	ata_std_ports(&ap->ioaddr);
+
+	/* activate */
+	return ata_host_activate(host, pnp_irq(idev, 0), ata_interrupt, 0,
+				 &isapnp_sht);
 }
 
 /**
diff --git a/drivers/ata/pata_it8213.c b/drivers/ata/pata_it8213.c
index ea73470..011306e 100644
--- a/drivers/ata/pata_it8213.c
+++ b/drivers/ata/pata_it8213.c
@@ -25,8 +25,8 @@
  *	it8213_pre_reset	-	check for 40/80 pin
  *	@ap: Port
  *
- *	Perform cable detection for the 8213 ATA interface. This is
- *	different to the PIIX arrangement
+ *	Filter out ports by the enable bits before doing the normal reset
+ *	and probe.
  */
 
 static int it8213_pre_reset(struct ata_port *ap)
@@ -34,23 +34,14 @@ static int it8213_pre_reset(struct ata_port *ap)
 	static const struct pci_bits it8213_enable_bits[] = {
 		{ 0x41U, 1U, 0x80UL, 0x80UL },	/* port 0 */
 	};
-
 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
-	u8 tmp;
-
 	if (!pci_test_config_bits(pdev, &it8213_enable_bits[ap->port_no]))
 		return -ENOENT;
-
-	pci_read_config_byte(pdev, 0x42, &tmp);
-	if (tmp & 2)	/* The initial docs are incorrect */
-		ap->cbl = ATA_CBL_PATA40;
-	else
-		ap->cbl = ATA_CBL_PATA80;
 	return ata_std_prereset(ap);
 }
 
 /**
- *	it8213_probe_reset - Probe specified port on PATA host controller
+ *	it8213_error_handler - Probe specified port on PATA host controller
  *	@ap: Port to probe
  *
  *	LOCKING:
@@ -63,9 +54,27 @@ static void it8213_error_handler(struct ata_port *ap)
 }
 
 /**
+ *	it8213_cable_detect	-	check for 40/80 pin
+ *	@ap: Port
+ *
+ *	Perform cable detection for the 8213 ATA interface. This is
+ *	different to the PIIX arrangement
+ */
+
+static int it8213_cable_detect(struct ata_port *ap)
+{
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+	u8 tmp;
+	pci_read_config_byte(pdev, 0x42, &tmp);
+	if (tmp & 2)	/* The initial docs are incorrect */
+		return ATA_CBL_PATA40;
+	return ATA_CBL_PATA80;
+}
+
+/**
  *	it8213_set_piomode - Initialize host controller PATA PIO timings
  *	@ap: Port whose timings we are configuring
- *	@adev: um
+ *	@adev: Device whose timings we are configuring
  *
  *	Set PIO mode for device, in host controller PCI config space.
  *
@@ -268,6 +277,7 @@ static const struct ata_port_operations it8213_ops = {
 	.thaw			= ata_bmdma_thaw,
 	.error_handler		= it8213_error_handler,
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
+	.cable_detect		= it8213_cable_detect,
 
 	.bmdma_setup		= ata_bmdma_setup,
 	.bmdma_start		= ata_bmdma_start,
diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c
index 35ecb2b..f1f8cec 100644
--- a/drivers/ata/pata_it821x.c
+++ b/drivers/ata/pata_it821x.c
@@ -80,7 +80,7 @@
 
 
 #define DRV_NAME "pata_it821x"
-#define DRV_VERSION "0.3.4"
+#define DRV_VERSION "0.3.6"
 
 struct it821x_dev
 {
@@ -113,31 +113,6 @@ struct it821x_dev
 static int it8212_noraid;
 
 /**
- *	it821x_pre_reset	-	probe
- *	@ap: ATA port
- *
- *	Set the cable type
- */
-
-static int it821x_pre_reset(struct ata_port *ap)
-{
-	ap->cbl = ATA_CBL_PATA80;
-	return ata_std_prereset(ap);
-}
-
-/**
- *	it821x_error_handler	-	probe/reset
- *	@ap: ATA port
- *
- *	Set the cable type and trigger a probe
- */
-
-static void it821x_error_handler(struct ata_port *ap)
-{
-	return ata_bmdma_drive_eh(ap, it821x_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
-}
-
-/**
  *	it821x_program	-	program the PIO/MWDMA registers
  *	@ap: ATA port
  *	@adev: Device to program
@@ -520,7 +495,6 @@ static int it821x_smart_set_mode(struct ata_port *ap, struct ata_device **unused
 
 /**
  *	it821x_dev_config	-	Called each device identify
- *	@ap: ATA port
  *	@adev: Device that has just been identified
  *
  *	Perform the initial setup needed for each device that is chip
@@ -531,7 +505,7 @@ static int it821x_smart_set_mode(struct ata_port *ap, struct ata_device **unused
  *	basically we need to filter commands for this chip.
  */
 
-static void it821x_dev_config(struct ata_port *ap, struct ata_device *adev)
+static void it821x_dev_config(struct ata_device *adev)
 {
 	unsigned char model_num[ATA_ID_PROD_LEN + 1];
 
@@ -667,8 +641,9 @@ static struct ata_port_operations it821x_smart_port_ops = {
 
 	.freeze		= ata_bmdma_freeze,
 	.thaw		= ata_bmdma_thaw,
-	.error_handler	= it821x_error_handler,
+	.error_handler	= ata_bmdma_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= ata_cable_unknown,
 
 	.bmdma_setup 	= ata_bmdma_setup,
 	.bmdma_start 	= ata_bmdma_start,
@@ -703,8 +678,9 @@ static struct ata_port_operations it821x_passthru_port_ops = {
 
 	.freeze		= ata_bmdma_freeze,
 	.thaw		= ata_bmdma_thaw,
-	.error_handler	= it821x_error_handler,
+	.error_handler	= ata_bmdma_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= ata_cable_unknown,
 
 	.bmdma_setup 	= ata_bmdma_setup,
 	.bmdma_start 	= it821x_passthru_bmdma_start,
diff --git a/drivers/ata/pata_ixp4xx_cf.c b/drivers/ata/pata_ixp4xx_cf.c
index c6f0e19..420c343 100644
--- a/drivers/ata/pata_ixp4xx_cf.c
+++ b/drivers/ata/pata_ixp4xx_cf.c
@@ -129,8 +129,8 @@ static struct ata_port_operations ixp4xx_port_ops = {
 	.qc_issue	= ata_qc_issue_prot,
 	.eng_timeout	= ata_eng_timeout,
 	.data_xfer	= ixp4xx_mmio_data_xfer,
+	.cable_detect	= ata_cable_40wire,
 
-	.irq_handler	= ata_interrupt,
 	.irq_clear	= ixp4xx_irq_clear,
 	.irq_on		= ata_irq_on,
 	.irq_ack	= ata_irq_ack,
@@ -173,12 +173,12 @@ static void ixp4xx_setup_port(struct ata_ioports *ioaddr,
 
 static __devinit int ixp4xx_pata_probe(struct platform_device *pdev)
 {
-	int ret;
 	unsigned int irq;
 	struct resource *cs0, *cs1;
-	struct ata_probe_ent ae;
-
+	struct ata_host *host;
+	struct ata_port *ap;
 	struct ixp4xx_pata_data *data = pdev->dev.platform_data;
+	int rc;
 
 	cs0 = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	cs1 = platform_get_resource(pdev, IORESOURCE_MEM, 1);
@@ -186,6 +186,12 @@ static __devinit int ixp4xx_pata_probe(struct platform_device *pdev)
 	if (!cs0 || !cs1)
 		return -EINVAL;
 
+	/* allocate host */
+	host = ata_host_alloc(&pdev->dev, 1);
+	if (!host)
+		return -ENOMEM;
+
+	/* acquire resources and fill host */
 	pdev->dev.coherent_dma_mask = DMA_32BIT_MASK;
 
 	data->cs0 = devm_ioremap(&pdev->dev, cs0->start, 0x1000);
@@ -199,32 +205,22 @@ static __devinit int ixp4xx_pata_probe(struct platform_device *pdev)
 	*data->cs0_cfg = data->cs0_bits;
 	*data->cs1_cfg = data->cs1_bits;
 
-	memset(&ae, 0, sizeof(struct ata_probe_ent));
-	INIT_LIST_HEAD(&ae.node);
+	ap = host->ports[0];
 
-	ae.dev		= &pdev->dev;
-	ae.port_ops	= &ixp4xx_port_ops;
-	ae.sht		= &ixp4xx_sht;
-	ae.n_ports	= 1;
-	ae.pio_mask	= 0x1f; /* PIO4 */
-	ae.irq		= irq;
-	ae.irq_flags	= 0;
-	ae.port_flags	= ATA_FLAG_MMIO | ATA_FLAG_NO_LEGACY
-			| ATA_FLAG_NO_ATAPI | ATA_FLAG_SRST;
+	ap->ops	= &ixp4xx_port_ops;
+	ap->pio_mask = 0x1f; /* PIO4 */
+	ap->flags |= ATA_FLAG_MMIO | ATA_FLAG_NO_LEGACY | ATA_FLAG_NO_ATAPI;
 
 	/* run in polling mode if no irq has been assigned */
 	if (!irq)
-		ae.port_flags |= ATA_FLAG_PIO_POLLING;
+		ap->flags |= ATA_FLAG_PIO_POLLING;
 
-	ixp4xx_setup_port(&ae.port[0], data);
+	ixp4xx_setup_port(&ap->ioaddr, data);
 
 	dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n");
 
-	ret = ata_device_add(&ae);
-	if (ret == 0)
-		return -ENODEV;
-
-	return 0;
+	/* activate host */
+	return ata_host_activate(host, irq, ata_interrupt, 0, &ixp4xx_sht);
 }
 
 static __devexit int ixp4xx_pata_remove(struct platform_device *dev)
diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c
index 86fbcd6..7070992 100644
--- a/drivers/ata/pata_legacy.c
+++ b/drivers/ata/pata_legacy.c
@@ -162,6 +162,7 @@ static struct ata_port_operations simple_port_ops = {
 	.thaw		= ata_bmdma_thaw,
 	.error_handler	= ata_bmdma_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= ata_cable_40wire,
 
 	.qc_prep 	= ata_qc_prep,
 	.qc_issue	= ata_qc_issue_prot,
@@ -185,6 +186,7 @@ static struct ata_port_operations legacy_port_ops = {
 	.check_status 	= ata_check_status,
 	.exec_command	= ata_exec_command,
 	.dev_select 	= ata_std_dev_select,
+	.cable_detect	= ata_cable_40wire,
 
 	.freeze		= ata_bmdma_freeze,
 	.thaw		= ata_bmdma_thaw,
@@ -305,6 +307,7 @@ static struct ata_port_operations pdc20230_port_ops = {
 	.thaw		= ata_bmdma_thaw,
 	.error_handler	= ata_bmdma_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= ata_cable_40wire,
 
 	.qc_prep 	= ata_qc_prep,
 	.qc_issue	= ata_qc_issue_prot,
@@ -360,6 +363,7 @@ static struct ata_port_operations ht6560a_port_ops = {
 	.thaw		= ata_bmdma_thaw,
 	.error_handler	= ata_bmdma_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= ata_cable_40wire,
 
 	.qc_prep 	= ata_qc_prep,
 	.qc_issue	= ata_qc_issue_prot,
@@ -426,6 +430,7 @@ static struct ata_port_operations ht6560b_port_ops = {
 	.thaw		= ata_bmdma_thaw,
 	.error_handler	= ata_bmdma_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= ata_cable_40wire,
 
 	.qc_prep 	= ata_qc_prep,
 	.qc_issue	= ata_qc_issue_prot,
@@ -547,6 +552,7 @@ static struct ata_port_operations opti82c611a_port_ops = {
 	.thaw		= ata_bmdma_thaw,
 	.error_handler	= ata_bmdma_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= ata_cable_40wire,
 
 	.qc_prep 	= ata_qc_prep,
 	.qc_issue	= ata_qc_issue_prot,
@@ -680,6 +686,7 @@ static struct ata_port_operations opti82c46x_port_ops = {
 	.thaw		= ata_bmdma_thaw,
 	.error_handler	= ata_bmdma_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= ata_cable_40wire,
 
 	.qc_prep 	= ata_qc_prep,
 	.qc_issue	= opti82c46x_qc_issue_prot,
@@ -709,7 +716,8 @@ static struct ata_port_operations opti82c46x_port_ops = {
 static __init int legacy_init_one(int port, unsigned long io, unsigned long ctrl, int irq)
 {
 	struct legacy_data *ld = &legacy_data[nr_legacy_host];
-	struct ata_probe_ent ae;
+	struct ata_host *host;
+	struct ata_port *ap;
 	struct platform_device *pdev;
 	struct ata_port_operations *ops = &legacy_port_ops;
 	void __iomem *io_addr, *ctrl_addr;
@@ -791,24 +799,23 @@ static __init int legacy_init_one(int port, unsigned long io, unsigned long ctrl
 	if (ops == &legacy_port_ops && (autospeed & mask))
 		ops = &simple_port_ops;
 
-	memset(&ae, 0, sizeof(struct ata_probe_ent));
-	INIT_LIST_HEAD(&ae.node);
-	ae.dev = &pdev->dev;
-	ae.port_ops = ops;
-	ae.sht = &legacy_sht;
-	ae.n_ports = 1;
-	ae.pio_mask = pio_modes;
-	ae.irq = irq;
-	ae.irq_flags = 0;
-	ae.port_flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST|iordy;
-	ae.port[0].cmd_addr = io_addr;
-	ae.port[0].altstatus_addr = ctrl_addr;
-	ae.port[0].ctl_addr = ctrl_addr;
-	ata_std_ports(&ae.port[0]);
-	ae.private_data = ld;
-
-	ret = -ENODEV;
-	if (!ata_device_add(&ae))
+	ret = -ENOMEM;
+	host = ata_host_alloc(&pdev->dev, 1);
+	if (!host)
+		goto fail;
+	ap = host->ports[0];
+
+	ap->ops = ops;
+	ap->pio_mask = pio_modes;
+	ap->flags |= ATA_FLAG_SLAVE_POSS | iordy;
+	ap->ioaddr.cmd_addr = io_addr;
+	ap->ioaddr.altstatus_addr = ctrl_addr;
+	ap->ioaddr.ctl_addr = ctrl_addr;
+	ata_std_ports(&ap->ioaddr);
+	ap->private_data = ld;
+
+	ret = ata_host_activate(host, irq, ata_interrupt, 0, &legacy_sht);
+	if (ret)
 		goto fail;
 
 	legacy_host[nr_legacy_host++] = dev_get_drvdata(&pdev->dev);
diff --git a/drivers/ata/pata_marvell.c b/drivers/ata/pata_marvell.c
index 6dd7c4e..d9b94a1 100644
--- a/drivers/ata/pata_marvell.c
+++ b/drivers/ata/pata_marvell.c
@@ -20,7 +20,7 @@
 #include <linux/ata.h>
 
 #define DRV_NAME	"pata_marvell"
-#define DRV_VERSION	"0.1.1"
+#define DRV_VERSION	"0.1.4"
 
 /**
  *	marvell_pre_reset	-	check for 40/80 pin
@@ -52,22 +52,23 @@ static int marvell_pre_reset(struct ata_port *ap)
 	if ((pdev->device == 0x6145) && (ap->port_no == 0) &&
 	    (!(devices & 0x10)))	/* PATA enable ? */
 		return -ENOENT;
+	return ata_std_prereset(ap);
+}
 
+static int marvell_cable_detect(struct ata_port *ap)
+{
 	/* Cable type */
 	switch(ap->port_no)
 	{
 	case 0:
 		if (ioread8(ap->ioaddr.bmdma_addr + 1) & 1)
-			ap->cbl = ATA_CBL_PATA40;
-		else
-			ap->cbl = ATA_CBL_PATA80;
-		break;
-
+			return ATA_CBL_PATA40;
+		return ATA_CBL_PATA80;
 	case 1: /* Legacy SATA port */
-		ap->cbl = ATA_CBL_SATA;
-		break;
+		return ATA_CBL_SATA;
 	}
-	return ata_std_prereset(ap);
+	BUG();
+	return 0;	/* Our BUG macro needs the right markup */
 }
 
 /**
@@ -123,6 +124,7 @@ static const struct ata_port_operations marvell_ops = {
 	.thaw			= ata_bmdma_thaw,
 	.error_handler		= marvell_error_handler,
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
+	.cable_detect		= marvell_cable_detect,
 
 	/* BMDMA handling is PCI ATA format, use helpers */
 	.bmdma_setup		= ata_bmdma_setup,
diff --git a/drivers/ata/pata_mpc52xx.c b/drivers/ata/pata_mpc52xx.c
index 882c36e..9587a89 100644
--- a/drivers/ata/pata_mpc52xx.c
+++ b/drivers/ata/pata_mpc52xx.c
@@ -24,7 +24,7 @@
 
 
 #define DRV_NAME	"mpc52xx_ata"
-#define DRV_VERSION	"0.1.0"
+#define DRV_VERSION	"0.1.0ac2"
 
 
 /* Private structures used by the driver */
@@ -297,38 +297,37 @@ static struct ata_port_operations mpc52xx_ata_port_ops = {
 	.freeze			= ata_bmdma_freeze,
 	.thaw			= ata_bmdma_thaw,
 	.error_handler		= mpc52xx_ata_error_handler,
+	.cable_detect		= ata_cable_40wire,
 	.qc_prep		= ata_qc_prep,
 	.qc_issue		= ata_qc_issue_prot,
 	.data_xfer		= ata_data_xfer,
-	.irq_handler		= ata_interrupt,
 	.irq_clear		= ata_bmdma_irq_clear,
 	.irq_on			= ata_irq_on,
 	.irq_ack		= ata_irq_ack,
 	.port_start		= ata_port_start,
 };
 
-static struct ata_probe_ent mpc52xx_ata_probe_ent = {
-	.port_ops	= &mpc52xx_ata_port_ops,
-	.sht		= &mpc52xx_ata_sht,
-	.n_ports	= 1,
-	.pio_mask	= 0x1f,		/* Up to PIO4 */
-	.mwdma_mask	= 0x00,		/* No MWDMA   */
-	.udma_mask	= 0x00,		/* No UDMA    */
-	.port_flags	= ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
-	.irq_flags	= 0,
-};
-
 static int __devinit
 mpc52xx_ata_init_one(struct device *dev, struct mpc52xx_ata_priv *priv)
 {
-	struct ata_probe_ent *ae = &mpc52xx_ata_probe_ent;
-	struct ata_ioports *aio = &ae->port[0];
-	int rv;
-
-	INIT_LIST_HEAD(&ae->node);
-	ae->dev = dev;
-	ae->irq = priv->ata_irq;
-
+	struct ata_host *host;
+	struct ata_port *ap;
+	struct ata_ioports *aio;
+	int rc;
+
+	host = ata_host_alloc(dev, 1);
+	if (!host)
+		return -ENOMEM;
+
+	ap = host->ports[0];
+	ap->flags		|= ATA_FLAG_SLAVE_POSS;
+	ap->pio_mask		= 0x1f;	/* Up to PIO4 */
+	ap->mwdma_mask		= 0x00;	/* No MWDMA   */
+	ap->udma_mask		= 0x00;	/* No UDMA    */
+	ap->ops			= &mpc52xx_ata_port_ops;
+	host->private_data	= priv;
+
+	aio = &ap->ioaddr;
 	aio->cmd_addr		= NULL;	/* Don't have a classic reg block */
 	aio->altstatus_addr	= &priv->ata_regs->tf_control;
 	aio->ctl_addr		= &priv->ata_regs->tf_control;
@@ -343,11 +342,9 @@ mpc52xx_ata_init_one(struct device *dev, struct mpc52xx_ata_priv *priv)
 	aio->status_addr	= &priv->ata_regs->tf_command;
 	aio->command_addr	= &priv->ata_regs->tf_command;
 
-	ae->private_data = priv;
-
-	rv = ata_device_add(ae);
-
-	return rv ? 0 : -EINVAL;
+	/* activate host */
+	return ata_host_activate(host, priv->ata_irq, ata_interrupt, 0,
+				 &mpc52xx_ata_sht);
 }
 
 static struct mpc52xx_ata_priv *
diff --git a/drivers/ata/pata_mpiix.c b/drivers/ata/pata_mpiix.c
index 4abe45a..987c5fa 100644
--- a/drivers/ata/pata_mpiix.c
+++ b/drivers/ata/pata_mpiix.c
@@ -35,7 +35,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_mpiix"
-#define DRV_VERSION "0.7.5"
+#define DRV_VERSION "0.7.6"
 
 enum {
 	IDETIM = 0x6C,		/* IDE control register */
@@ -53,7 +53,6 @@ static int mpiix_pre_reset(struct ata_port *ap)
 
 	if (!pci_test_config_bits(pdev, &mpiix_enable_bits))
 		return -ENOENT;
-	ap->cbl = ATA_CBL_PATA40;
 	return ata_std_prereset(ap);
 }
 
@@ -185,12 +184,12 @@ static struct ata_port_operations mpiix_port_ops = {
 	.thaw		= ata_bmdma_thaw,
 	.error_handler	= mpiix_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= ata_cable_40wire,
 
 	.qc_prep 	= ata_qc_prep,
 	.qc_issue	= mpiix_qc_issue_prot,
 	.data_xfer	= ata_data_xfer,
 
-	.irq_handler	= ata_interrupt,
 	.irq_clear	= ata_bmdma_irq_clear,
 	.irq_on		= ata_irq_on,
 	.irq_ack	= ata_irq_ack,
@@ -201,8 +200,9 @@ static struct ata_port_operations mpiix_port_ops = {
 static int mpiix_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
 	/* Single threaded by the PCI probe logic */
-	static struct ata_probe_ent probe;
 	static int printed_version;
+	struct ata_host *host;
+	struct ata_port *ap;
 	void __iomem *cmd_addr, *ctl_addr;
 	u16 idetim;
 	int irq;
@@ -210,6 +210,10 @@ static int mpiix_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 	if (!printed_version++)
 		dev_printk(KERN_DEBUG, &dev->dev, "version " DRV_VERSION "\n");
 
+	host = ata_host_alloc(&dev->dev, 1);
+	if (!host)
+		return -ENOMEM;
+
 	/* MPIIX has many functions which can be turned on or off according
 	   to other devices present. Make sure IDE is enabled before we try
 	   and use it */
@@ -238,27 +242,21 @@ static int mpiix_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 	   without BARs set fools the setup.  #2 If you pci_disable_device
 	   the MPIIX your box goes castors up */
 
-	INIT_LIST_HEAD(&probe.node);
-	probe.dev = pci_dev_to_dev(dev);
-	probe.port_ops = &mpiix_port_ops;
-	probe.sht = &mpiix_sht;
-	probe.pio_mask = 0x1F;
-	probe.irq_flags = IRQF_SHARED;
-	probe.port_flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST;
-	probe.n_ports = 1;
+	ap = host->ports[0];
+	ap->ops = &mpiix_port_ops;
+	ap->pio_mask = 0x1F;
+	ap->flags |= ATA_FLAG_SLAVE_POSS;
 
-	probe.irq = irq;
-	probe.port[0].cmd_addr = cmd_addr;
-	probe.port[0].ctl_addr = ctl_addr;
-	probe.port[0].altstatus_addr = ctl_addr;
+	ap->ioaddr.cmd_addr = cmd_addr;
+	ap->ioaddr.ctl_addr = ctl_addr;
+	ap->ioaddr.altstatus_addr = ctl_addr;
 
 	/* Let libata fill in the port details */
-	ata_std_ports(&probe.port[0]);
+	ata_std_ports(&ap->ioaddr);
 
-	/* Now add the port that is active */
-	if (ata_device_add(&probe))
-		return 0;
-	return -ENODEV;
+	/* activate host */
+	return ata_host_activate(host, irq, ata_interrupt, IRQF_SHARED,
+				 &mpiix_sht);
 }
 
 static const struct pci_device_id mpiix[] = {
diff --git a/drivers/ata/pata_netcell.c b/drivers/ata/pata_netcell.c
index 38f99b3..dbba5b7 100644
--- a/drivers/ata/pata_netcell.c
+++ b/drivers/ata/pata_netcell.c
@@ -16,33 +16,7 @@
 #include <linux/ata.h>
 
 #define DRV_NAME	"pata_netcell"
-#define DRV_VERSION	"0.1.6"
-
-/**
- *	netcell_probe_init	-	check for 40/80 pin
- *	@ap: Port
- *
- *	Cables are handled by the RAID controller. Report 80 pin.
- */
-
-static int netcell_pre_reset(struct ata_port *ap)
-{
-	ap->cbl = ATA_CBL_PATA80;
-	return ata_std_prereset(ap);
-}
-
-/**
- *	netcell_probe_reset - Probe specified port on PATA host controller
- *	@ap: Port to probe
- *
- *	LOCKING:
- *	None (inherited from caller).
- */
-
-static void netcell_error_handler(struct ata_port *ap)
-{
-	return ata_bmdma_drive_eh(ap, netcell_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
-}
+#define DRV_VERSION	"0.1.7"
 
 /* No PIO or DMA methods needed for this device */
 
@@ -81,8 +55,9 @@ static const struct ata_port_operations netcell_ops = {
 
 	.freeze			= ata_bmdma_freeze,
 	.thaw			= ata_bmdma_thaw,
-	.error_handler		= netcell_error_handler,
+	.error_handler		= ata_bmdma_error_handler,
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
+	.cable_detect		= ata_cable_80wire,
 
 	/* BMDMA handling is PCI ATA format, use helpers */
 	.bmdma_setup		= ata_bmdma_setup,
diff --git a/drivers/ata/pata_ns87410.c b/drivers/ata/pata_ns87410.c
index 9944a28..078aeda 100644
--- a/drivers/ata/pata_ns87410.c
+++ b/drivers/ata/pata_ns87410.c
@@ -28,13 +28,13 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_ns87410"
-#define DRV_VERSION "0.4.3"
+#define DRV_VERSION "0.4.6"
 
 /**
  *	ns87410_pre_reset		-	probe begin
  *	@ap: ATA port
  *
- *	Set up cable type and use generic probe init
+ *	Check enabled ports
  */
 
 static int ns87410_pre_reset(struct ata_port *ap)
@@ -47,7 +47,6 @@ static int ns87410_pre_reset(struct ata_port *ap)
 
 	if (!pci_test_config_bits(pdev, &ns87410_enable_bits[ap->port_no]))
 		return -ENOENT;
-	ap->cbl = ATA_CBL_PATA40;
 	return ata_std_prereset(ap);
 }
 
@@ -177,6 +176,7 @@ static struct ata_port_operations ns87410_port_ops = {
 	.thaw		= ata_bmdma_thaw,
 	.error_handler	= ns87410_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= ata_cable_40wire,
 
 	.qc_prep 	= ata_qc_prep,
 	.qc_issue	= ns87410_qc_issue_prot,
diff --git a/drivers/ata/pata_oldpiix.c b/drivers/ata/pata_oldpiix.c
index da68cd1..dea4690 100644
--- a/drivers/ata/pata_oldpiix.c
+++ b/drivers/ata/pata_oldpiix.c
@@ -25,7 +25,7 @@
 #include <linux/ata.h>
 
 #define DRV_NAME	"pata_oldpiix"
-#define DRV_VERSION	"0.5.4"
+#define DRV_VERSION	"0.5.5"
 
 /**
  *	oldpiix_pre_reset		-	probe begin
@@ -44,7 +44,6 @@ static int oldpiix_pre_reset(struct ata_port *ap)
 
 	if (!pci_test_config_bits(pdev, &oldpiix_enable_bits[ap->port_no]))
 		return -ENOENT;
-	ap->cbl = ATA_CBL_PATA40;
 	return ata_std_prereset(ap);
 }
 
@@ -65,7 +64,7 @@ static void oldpiix_pata_error_handler(struct ata_port *ap)
 /**
  *	oldpiix_set_piomode - Initialize host controller PATA PIO timings
  *	@ap: Port whose timings we are configuring
- *	@adev: um
+ *	@adev: Device whose timings we are configuring
  *
  *	Set PIO mode for device, in host controller PCI config space.
  *
@@ -255,6 +254,7 @@ static const struct ata_port_operations oldpiix_pata_ops = {
 	.thaw			= ata_bmdma_thaw,
 	.error_handler		= oldpiix_pata_error_handler,
 	.post_internal_cmd 	= ata_bmdma_post_internal_cmd,
+	.cable_detect		= ata_cable_40wire,
 
 	.bmdma_setup		= ata_bmdma_setup,
 	.bmdma_start		= ata_bmdma_start,
diff --git a/drivers/ata/pata_opti.c b/drivers/ata/pata_opti.c
index 3fd3a35..13b63e2 100644
--- a/drivers/ata/pata_opti.c
+++ b/drivers/ata/pata_opti.c
@@ -34,7 +34,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_opti"
-#define DRV_VERSION "0.2.8"
+#define DRV_VERSION "0.2.9"
 
 enum {
 	READ_REG	= 0,	/* index of Read cycle timing register */
@@ -61,8 +61,6 @@ static int opti_pre_reset(struct ata_port *ap)
 
 	if (!pci_test_config_bits(pdev, &opti_enable_bits[ap->port_no]))
 		return -ENOENT;
-
-	ap->cbl = ATA_CBL_PATA40;
 	return ata_std_prereset(ap);
 }
 
@@ -198,6 +196,7 @@ static struct ata_port_operations opti_port_ops = {
 	.thaw		= ata_bmdma_thaw,
 	.error_handler	= opti_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= ata_cable_40wire,
 
 	.bmdma_setup 	= ata_bmdma_setup,
 	.bmdma_start 	= ata_bmdma_start,
diff --git a/drivers/ata/pata_optidma.c b/drivers/ata/pata_optidma.c
index 9764907..b70e04c 100644
--- a/drivers/ata/pata_optidma.c
+++ b/drivers/ata/pata_optidma.c
@@ -33,7 +33,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_optidma"
-#define DRV_VERSION "0.2.4"
+#define DRV_VERSION "0.3.2"
 
 enum {
 	READ_REG	= 0,	/* index of Read cycle timing register */
@@ -62,7 +62,6 @@ static int optidma_pre_reset(struct ata_port *ap)
 	if (ap->port_no && !pci_test_config_bits(pdev, &optidma_enable_bits))
 		return -ENOENT;
 
-	ap->cbl = ATA_CBL_PATA40;
 	return ata_std_prereset(ap);
 }
 
@@ -115,7 +114,7 @@ static void optidma_lock(struct ata_port *ap)
 }
 
 /**
- *	optidma_set_mode	-	set mode data
+ *	optidma_mode_setup	-	set mode data
  *	@ap: ATA interface
  *	@adev: ATA device
  *	@mode: Mode to set
@@ -128,7 +127,7 @@ static void optidma_lock(struct ata_port *ap)
  *	IRQ here we depend on the host set locking to avoid catastrophe.
  */
 
-static void optidma_set_mode(struct ata_port *ap, struct ata_device *adev, u8 mode)
+static void optidma_mode_setup(struct ata_port *ap, struct ata_device *adev, u8 mode)
 {
 	struct ata_device *pair = ata_dev_pair(adev);
 	int pio = adev->pio_mode - XFER_PIO_0;
@@ -202,7 +201,7 @@ static void optidma_set_mode(struct ata_port *ap, struct ata_device *adev, u8 mo
 }
 
 /**
- *	optiplus_set_mode	-	DMA setup for Firestar Plus
+ *	optiplus_mode_setup	-	DMA setup for Firestar Plus
  *	@ap: ATA port
  *	@adev: device
  *	@mode: desired mode
@@ -213,7 +212,7 @@ static void optidma_set_mode(struct ata_port *ap, struct ata_device *adev, u8 mo
  *	one
  */
 
-static void optiplus_set_mode(struct ata_port *ap, struct ata_device *adev, u8 mode)
+static void optiplus_mode_setup(struct ata_port *ap, struct ata_device *adev, u8 mode)
 {
 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 	u8 udcfg;
@@ -225,7 +224,7 @@ static void optiplus_set_mode(struct ata_port *ap, struct ata_device *adev, u8 m
 	pci_read_config_byte(pdev, 0x44, &udcfg);
 	if (mode <= XFER_UDMA_0) {
 		udcfg &= ~(1 << unit);
-		optidma_set_mode(ap, adev, adev->dma_mode);
+		optidma_mode_setup(ap, adev, adev->dma_mode);
 	} else {
 		udcfg |=  (1 << unit);
 		if (ap->port_no) {
@@ -253,7 +252,7 @@ static void optiplus_set_mode(struct ata_port *ap, struct ata_device *adev, u8 m
 
 static void optidma_set_pio_mode(struct ata_port *ap, struct ata_device *adev)
 {
-	optidma_set_mode(ap, adev, adev->pio_mode);
+	optidma_mode_setup(ap, adev, adev->pio_mode);
 }
 
 /**
@@ -268,7 +267,7 @@ static void optidma_set_pio_mode(struct ata_port *ap, struct ata_device *adev)
 
 static void optidma_set_dma_mode(struct ata_port *ap, struct ata_device *adev)
 {
-	optidma_set_mode(ap, adev, adev->dma_mode);
+	optidma_mode_setup(ap, adev, adev->dma_mode);
 }
 
 /**
@@ -283,7 +282,7 @@ static void optidma_set_dma_mode(struct ata_port *ap, struct ata_device *adev)
 
 static void optiplus_set_pio_mode(struct ata_port *ap, struct ata_device *adev)
 {
-	optiplus_set_mode(ap, adev, adev->pio_mode);
+	optiplus_mode_setup(ap, adev, adev->pio_mode);
 }
 
 /**
@@ -298,7 +297,7 @@ static void optiplus_set_pio_mode(struct ata_port *ap, struct ata_device *adev)
 
 static void optiplus_set_dma_mode(struct ata_port *ap, struct ata_device *adev)
 {
-	optiplus_set_mode(ap, adev, adev->dma_mode);
+	optiplus_mode_setup(ap, adev, adev->dma_mode);
 }
 
 /**
@@ -322,26 +321,29 @@ static u8 optidma_make_bits43(struct ata_device *adev)
 }
 
 /**
- *	optidma_post_set_mode	-	finalize PCI setup
+ *	optidma_set_mode	-	mode setup
  *	@ap: port to set up
  *
- *	Finalise the configuration by writing the nibble of extra bits
- *	of data into the chip.
+ *	Use the standard setup to tune the chipset and then finalise the
+ *	configuration by writing the nibble of extra bits of data into
+ *	the chip.
  */
 
-static void optidma_post_set_mode(struct ata_port *ap)
+static int optidma_set_mode(struct ata_port *ap, struct ata_device **r_failed)
 {
 	u8 r;
 	int nybble = 4 * ap->port_no;
 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
-
-	pci_read_config_byte(pdev, 0x43, &r);
-
-	r &= (0x0F << nybble);
-	r |= (optidma_make_bits43(&ap->device[0]) +
-	     (optidma_make_bits43(&ap->device[0]) << 2)) << nybble;
-
-	pci_write_config_byte(pdev, 0x43, r);
+	int rc  = ata_do_set_mode(ap, r_failed);
+	if (rc == 0) {
+		pci_read_config_byte(pdev, 0x43, &r);
+
+		r &= (0x0F << nybble);
+		r |= (optidma_make_bits43(&ap->device[0]) +
+		     (optidma_make_bits43(&ap->device[0]) << 2)) << nybble;
+		pci_write_config_byte(pdev, 0x43, r);
+	}
+	return rc;
 }
 
 static struct scsi_host_template optidma_sht = {
@@ -381,7 +383,8 @@ static struct ata_port_operations optidma_port_ops = {
 	.thaw		= ata_bmdma_thaw,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
 	.error_handler	= optidma_error_handler,
-	.post_set_mode	= optidma_post_set_mode,
+	.set_mode	= optidma_set_mode,
+	.cable_detect	= ata_cable_40wire,
 
 	.bmdma_setup 	= ata_bmdma_setup,
 	.bmdma_start 	= ata_bmdma_start,
@@ -416,7 +419,8 @@ static struct ata_port_operations optiplus_port_ops = {
 	.thaw		= ata_bmdma_thaw,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
 	.error_handler	= optidma_error_handler,
-	.post_set_mode	= optidma_post_set_mode,
+	.set_mode	= optidma_set_mode,
+	.cable_detect	= ata_cable_40wire,
 
 	.bmdma_setup 	= ata_bmdma_setup,
 	.bmdma_start 	= ata_bmdma_start,
diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c
index 103720f..75dc847 100644
--- a/drivers/ata/pata_pcmcia.c
+++ b/drivers/ata/pata_pcmcia.c
@@ -42,7 +42,7 @@
 
 
 #define DRV_NAME "pata_pcmcia"
-#define DRV_VERSION "0.3.0"
+#define DRV_VERSION "0.3.1"
 
 /*
  *	Private data structure to glue stuff together
@@ -54,6 +54,39 @@ struct ata_pcmcia_info {
 	dev_node_t	node;
 };
 
+/**
+ *	pcmcia_set_mode	-	PCMCIA specific mode setup
+ *	@ap: Port
+ *	@r_failed_dev: Return pointer for failed device
+ *
+ *	Perform the tuning and setup of the devices and timings, which
+ *	for PCMCIA is the same as any other controller. We wrap it however
+ *	as we need to spot hardware with incorrect or missing master/slave
+ *	decode, which alas is embarrassingly common in the PC world
+ */
+
+static int pcmcia_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev)
+{
+	struct ata_device *master = &ap->device[0];
+	struct ata_device *slave = &ap->device[1];
+
+	if (!ata_dev_enabled(master) || !ata_dev_enabled(slave))
+		return ata_do_set_mode(ap, r_failed_dev);
+
+	if (memcmp(master->id + ATA_ID_FW_REV,  slave->id + ATA_ID_FW_REV,
+			   ATA_ID_FW_REV_LEN + ATA_ID_PROD_LEN) == 0)
+	{
+		/* Suspicious match, but could be two cards from
+		   the same vendor - check serial */
+		if (memcmp(master->id + ATA_ID_SERNO, slave->id + ATA_ID_SERNO,
+			   ATA_ID_SERNO_LEN) == 0 && master->id[ATA_ID_SERNO] >> 8) {
+			ata_dev_printk(slave, KERN_WARNING, "is a ghost device, ignoring.\n");
+			ata_dev_disable(slave);
+		}
+	}
+	return ata_do_set_mode(ap, r_failed_dev);
+}
+
 static struct scsi_host_template pcmcia_sht = {
 	.module			= THIS_MODULE,
 	.name			= DRV_NAME,
@@ -73,6 +106,7 @@ static struct scsi_host_template pcmcia_sht = {
 };
 
 static struct ata_port_operations pcmcia_port_ops = {
+	.set_mode	= pcmcia_set_mode,
 	.port_disable	= ata_port_disable,
 	.tf_load	= ata_tf_load,
 	.tf_read	= ata_tf_read,
@@ -84,13 +118,13 @@ static struct ata_port_operations pcmcia_port_ops = {
 	.thaw		= ata_bmdma_thaw,
 	.error_handler	= ata_bmdma_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= ata_cable_40wire,
 
 	.qc_prep 	= ata_qc_prep,
 	.qc_issue	= ata_qc_issue_prot,
 
 	.data_xfer	= ata_data_xfer_noirq,
 
-	.irq_handler	= ata_interrupt,
 	.irq_clear	= ata_bmdma_irq_clear,
 	.irq_on		= ata_irq_on,
 	.irq_ack	= ata_irq_ack,
@@ -111,7 +145,8 @@ do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
 
 static int pcmcia_init_one(struct pcmcia_device *pdev)
 {
-	struct ata_probe_ent ae;
+	struct ata_host *host;
+	struct ata_port *ap;
 	struct ata_pcmcia_info *info;
 	tuple_t tuple;
 	struct {
@@ -255,24 +290,24 @@ next_entry:
  	 *	Having done the PCMCIA plumbing the ATA side is relatively
  	 *	sane.
 	 */
-
-	memset(&ae, 0, sizeof(struct ata_probe_ent));
-	INIT_LIST_HEAD(&ae.node);
-	ae.dev = &pdev->dev;
-	ae.port_ops = &pcmcia_port_ops;
-	ae.sht = &pcmcia_sht;
-	ae.n_ports = 1;
-	ae.pio_mask = 1;		/* ISA so PIO 0 cycles */
-	ae.irq = pdev->irq.AssignedIRQ;
-	ae.irq_flags = IRQF_SHARED;
-	ae.port_flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST;
-	ae.port[0].cmd_addr = io_addr;
-	ae.port[0].altstatus_addr = ctl_addr;
-	ae.port[0].ctl_addr = ctl_addr;
-	ata_std_ports(&ae.port[0]);
-
-	ret = -ENODEV;
-	if (ata_device_add(&ae) == 0)
+	ret = -ENOMEM;
+	host = ata_host_alloc(&pdev->dev, 1);
+	if (!host)
+		goto failed;
+	ap = host->ports[0];
+
+	ap->ops = &pcmcia_port_ops;
+	ap->pio_mask = 1;		/* ISA so PIO 0 cycles */
+	ap->flags |= ATA_FLAG_SLAVE_POSS;
+	ap->ioaddr.cmd_addr = io_addr;
+	ap->ioaddr.altstatus_addr = ctl_addr;
+	ap->ioaddr.ctl_addr = ctl_addr;
+	ata_std_ports(&ap->ioaddr);
+
+	/* activate */
+	ret = ata_host_activate(host, pdev->irq.AssignedIRQ, ata_interrupt,
+				IRQF_SHARED, &pcmcia_sht);
+	if (ret)
 		goto failed;
 
 	info->ndev = 1;
diff --git a/drivers/ata/pata_pdc2027x.c b/drivers/ata/pata_pdc2027x.c
index 93bcdad..a61cbc1 100644
--- a/drivers/ata/pata_pdc2027x.c
+++ b/drivers/ata/pata_pdc2027x.c
@@ -35,7 +35,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"pata_pdc2027x"
-#define DRV_VERSION	"0.8"
+#define DRV_VERSION	"0.9"
 #undef PDC_DEBUG
 
 #ifdef PDC_DEBUG
@@ -66,8 +66,10 @@ static int pdc2027x_init_one(struct pci_dev *pdev, const struct pci_device_id *e
 static void pdc2027x_error_handler(struct ata_port *ap);
 static void pdc2027x_set_piomode(struct ata_port *ap, struct ata_device *adev);
 static void pdc2027x_set_dmamode(struct ata_port *ap, struct ata_device *adev);
-static void pdc2027x_post_set_mode(struct ata_port *ap);
 static int pdc2027x_check_atapi_dma(struct ata_queued_cmd *qc);
+static unsigned long pdc2027x_mode_filter(struct ata_device *adev, unsigned long mask);
+static int pdc2027x_cable_detect(struct ata_port *ap);
+static int pdc2027x_set_mode(struct ata_port *ap, struct ata_device **r_failed);
 
 /*
  * ATA Timing Tables based on 133MHz controller clock.
@@ -146,6 +148,7 @@ static struct scsi_host_template pdc2027x_sht = {
 
 static struct ata_port_operations pdc2027x_pata100_ops = {
 	.port_disable		= ata_port_disable,
+	.mode_filter		= ata_pci_default_filter,
 
 	.tf_load		= ata_tf_load,
 	.tf_read		= ata_tf_read,
@@ -166,8 +169,8 @@ static struct ata_port_operations pdc2027x_pata100_ops = {
 	.thaw			= ata_bmdma_thaw,
 	.error_handler		= pdc2027x_error_handler,
 	.post_internal_cmd 	= ata_bmdma_post_internal_cmd,
+	.cable_detect		= pdc2027x_cable_detect,
 
-	.irq_handler		= ata_interrupt,
 	.irq_clear		= ata_bmdma_irq_clear,
 	.irq_on			= ata_irq_on,
 	.irq_ack		= ata_irq_ack,
@@ -179,7 +182,8 @@ static struct ata_port_operations pdc2027x_pata133_ops = {
 	.port_disable		= ata_port_disable,
 	.set_piomode		= pdc2027x_set_piomode,
 	.set_dmamode		= pdc2027x_set_dmamode,
-	.post_set_mode		= pdc2027x_post_set_mode,
+	.set_mode		= pdc2027x_set_mode,
+	.mode_filter		= pdc2027x_mode_filter,
 
 	.tf_load		= ata_tf_load,
 	.tf_read		= ata_tf_read,
@@ -200,8 +204,8 @@ static struct ata_port_operations pdc2027x_pata133_ops = {
 	.thaw			= ata_bmdma_thaw,
 	.error_handler		= pdc2027x_error_handler,
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
+	.cable_detect		= pdc2027x_cable_detect,
 
-	.irq_handler		= ata_interrupt,
 	.irq_clear		= ata_bmdma_irq_clear,
 	.irq_on			= ata_irq_on,
 	.irq_ack		= ata_irq_ack,
@@ -212,7 +216,6 @@ static struct ata_port_operations pdc2027x_pata133_ops = {
 static struct ata_port_info pdc2027x_port_info[] = {
 	/* PDC_UDMA_100 */
 	{
-		.sht		= &pdc2027x_sht,
 		.flags		= ATA_FLAG_NO_LEGACY | ATA_FLAG_SLAVE_POSS |
 		                  ATA_FLAG_MMIO,
 		.pio_mask	= 0x1f, /* pio0-4 */
@@ -222,7 +225,6 @@ static struct ata_port_info pdc2027x_port_info[] = {
 	},
 	/* PDC_UDMA_133 */
 	{
-		.sht		= &pdc2027x_sht,
 		.flags		= ATA_FLAG_NO_LEGACY | ATA_FLAG_SLAVE_POSS |
                         	  ATA_FLAG_MMIO,
 		.pio_mask	= 0x1f, /* pio0-4 */
@@ -261,7 +263,7 @@ static inline void __iomem *dev_mmio(struct ata_port *ap, struct ata_device *ade
 }
 
 /**
- *	pdc2027x_pata_cbl_detect - Probe host controller cable detect info
+ *	pdc2027x_pata_cable_detect - Probe host controller cable detect info
  *	@ap: Port for which cable detect info is desired
  *
  *	Read 80c cable indicator from Promise extended register.
@@ -270,7 +272,7 @@ static inline void __iomem *dev_mmio(struct ata_port *ap, struct ata_device *ade
  *	LOCKING:
  *	None (inherited from caller).
  */
-static void pdc2027x_cbl_detect(struct ata_port *ap)
+static int pdc2027x_cable_detect(struct ata_port *ap)
 {
 	u32 cgcr;
 
@@ -281,13 +283,10 @@ static void pdc2027x_cbl_detect(struct ata_port *ap)
 
 	PDPRINTK("No cable or 80-conductor cable on port %d\n", ap->port_no);
 
-	ap->cbl = ATA_CBL_PATA80;
-	return;
-
+	return ATA_CBL_PATA80;
 cbl40:
 	printk(KERN_INFO DRV_NAME ": 40-conductor cable detected on port %d\n", ap->port_no);
-	ap->cbl = ATA_CBL_PATA40;
-	ap->udma_mask &= ATA_UDMA_MASK_40C;
+	return ATA_CBL_PATA40;
 }
 
 /**
@@ -314,7 +313,6 @@ static int pdc2027x_prereset(struct ata_port *ap)
 	/* Check whether port enabled */
 	if (!pdc2027x_port_enabled(ap))
 		return -ENOENT;
-	pdc2027x_cbl_detect(ap);
 	return ata_std_prereset(ap);
 }
 
@@ -334,6 +332,32 @@ static void pdc2027x_error_handler(struct ata_port *ap)
 }
 
 /**
+ *	pdc2720x_mode_filter	-	mode selection filter
+ *	@adev: ATA device
+ *	@mask: list of modes proposed
+ *
+ *	Block UDMA on devices that cause trouble with this controller.
+ */
+
+static unsigned long pdc2027x_mode_filter(struct ata_device *adev, unsigned long mask)
+{
+	unsigned char model_num[ATA_ID_PROD_LEN + 1];
+	struct ata_device *pair = ata_dev_pair(adev);
+
+	if (adev->class != ATA_DEV_ATA || adev->devno == 0 || pair == NULL)
+		return ata_pci_default_filter(adev, mask);
+
+	/* Check for slave of a Maxtor at UDMA6 */
+	ata_id_c_string(pair->id, model_num, ATA_ID_PROD,
+			  ATA_ID_PROD_LEN + 1);
+	/* If the master is a maxtor in UDMA6 then the slave should not use UDMA 6 */
+	if(strstr(model_num, "Maxtor") == 0 && pair->dma_mode == XFER_UDMA_6)
+		mask &= ~ (1 << (6 + ATA_SHIFT_UDMA));
+
+	return ata_pci_default_filter(adev, mask);
+}
+
+/**
  *	pdc2027x_set_piomode - Initialize host controller PATA PIO timings
  *	@ap: Port to configure
  *	@adev: um
@@ -444,17 +468,22 @@ static void pdc2027x_set_dmamode(struct ata_port *ap, struct ata_device *adev)
 }
 
 /**
- *	pdc2027x_post_set_mode - Set the timing registers back to correct values.
+ *	pdc2027x_set_mode - Set the timing registers back to correct values.
  *	@ap: Port to configure
+ *	@r_failed: Returned device for failure
  *
  *	The pdc2027x hardware will look at "SET FEATURES" and change the timing registers
  *	automatically. The values set by the hardware might be incorrect, under 133Mhz PLL.
  *	This function overwrites the possibly incorrect values set by the hardware to be correct.
  */
-static void pdc2027x_post_set_mode(struct ata_port *ap)
+static int pdc2027x_set_mode(struct ata_port *ap, struct ata_device **r_failed)
 {
 	int i;
 
+	i = ata_do_set_mode(ap, r_failed);
+	if (i < 0)
+		return i;
+
 	for (i = 0; i < ATA_MAX_DEVICES; i++) {
 		struct ata_device *dev = &ap->device[i];
 
@@ -476,6 +505,7 @@ static void pdc2027x_post_set_mode(struct ata_port *ap)
 			}
 		}
 	}
+	return 0;
 }
 
 /**
@@ -521,12 +551,12 @@ static int pdc2027x_check_atapi_dma(struct ata_queued_cmd *qc)
 
 /**
  * pdc_read_counter - Read the ctr counter
- * @probe_ent: for the port address
+ * @host: target ATA host
  */
 
-static long pdc_read_counter(struct ata_probe_ent *probe_ent)
+static long pdc_read_counter(struct ata_host *host)
 {
-	void __iomem *mmio_base = probe_ent->iomap[PDC_MMIO_BAR];
+	void __iomem *mmio_base = host->iomap[PDC_MMIO_BAR];
 	long counter;
 	int retry = 1;
 	u32 bccrl, bccrh, bccrlv, bccrhv;
@@ -564,12 +594,12 @@ retry:
  * adjust_pll - Adjust the PLL input clock in Hz.
  *
  * @pdc_controller: controller specific information
- * @probe_ent: For the port address
+ * @host: target ATA host
  * @pll_clock: The input of PLL in HZ
  */
-static void pdc_adjust_pll(struct ata_probe_ent *probe_ent, long pll_clock, unsigned int board_idx)
+static void pdc_adjust_pll(struct ata_host *host, long pll_clock, unsigned int board_idx)
 {
-	void __iomem *mmio_base = probe_ent->iomap[PDC_MMIO_BAR];
+	void __iomem *mmio_base = host->iomap[PDC_MMIO_BAR];
 	u16 pll_ctl;
 	long pll_clock_khz = pll_clock / 1000;
 	long pout_required = board_idx? PDC_133_MHZ:PDC_100_MHZ;
@@ -649,19 +679,19 @@ static void pdc_adjust_pll(struct ata_probe_ent *probe_ent, long pll_clock, unsi
 
 /**
  * detect_pll_input_clock - Detect the PLL input clock in Hz.
- * @probe_ent: for the port address
+ * @host: target ATA host
  * Ex. 16949000 on 33MHz PCI bus for pdc20275.
  *     Half of the PCI clock.
  */
-static long pdc_detect_pll_input_clock(struct ata_probe_ent *probe_ent)
+static long pdc_detect_pll_input_clock(struct ata_host *host)
 {
-	void __iomem *mmio_base = probe_ent->iomap[PDC_MMIO_BAR];
+	void __iomem *mmio_base = host->iomap[PDC_MMIO_BAR];
 	u32 scr;
 	long start_count, end_count;
 	long pll_clock;
 
 	/* Read current counter value */
-	start_count = pdc_read_counter(probe_ent);
+	start_count = pdc_read_counter(host);
 
 	/* Start the test mode */
 	scr = readl(mmio_base + PDC_SYS_CTL);
@@ -673,7 +703,7 @@ static long pdc_detect_pll_input_clock(struct ata_probe_ent *probe_ent)
 	mdelay(100);
 
 	/* Read the counter values again */
-	end_count = pdc_read_counter(probe_ent);
+	end_count = pdc_read_counter(host);
 
 	/* Stop the test mode */
 	scr = readl(mmio_base + PDC_SYS_CTL);
@@ -692,11 +722,10 @@ static long pdc_detect_pll_input_clock(struct ata_probe_ent *probe_ent)
 
 /**
  * pdc_hardware_init - Initialize the hardware.
- * @pdev: instance of pci_dev found
- * @pdc_controller: controller specific information
- * @pe:  for the port address
+ * @host: target ATA host
+ * @board_idx: board identifier
  */
-static int pdc_hardware_init(struct pci_dev *pdev, struct ata_probe_ent *pe, unsigned int board_idx)
+static int pdc_hardware_init(struct ata_host *host, unsigned int board_idx)
 {
 	long pll_clock;
 
@@ -706,15 +735,15 @@ static int pdc_hardware_init(struct pci_dev *pdev, struct ata_probe_ent *pe, uns
 	 * Ex. 25MHz or 40MHz, we have to adjust the cycle_time.
 	 * The pdc20275 controller employs PLL circuit to help correct timing registers setting.
 	 */
-	pll_clock = pdc_detect_pll_input_clock(pe);
+	pll_clock = pdc_detect_pll_input_clock(host);
 
 	if (pll_clock < 0) /* counter overflow? Try again. */
-		pll_clock = pdc_detect_pll_input_clock(pe);
+		pll_clock = pdc_detect_pll_input_clock(host);
 
-	dev_printk(KERN_INFO, &pdev->dev, "PLL input clock %ld kHz\n", pll_clock/1000);
+	dev_printk(KERN_INFO, host->dev, "PLL input clock %ld kHz\n", pll_clock/1000);
 
 	/* Adjust PLL control register */
-	pdc_adjust_pll(pe, pll_clock, board_idx);
+	pdc_adjust_pll(host, pll_clock, board_idx);
 
 	return 0;
 }
@@ -746,8 +775,7 @@ static void pdc_ata_setup_port(struct ata_ioports *port, void __iomem *base)
  * Called when an instance of PCI adapter is inserted.
  * This function checks whether the hardware is supported,
  * initialize hardware and register an instance of ata_host to
- * libata by providing struct ata_probe_ent and ata_device_add().
- * (implements struct pci_driver.probe() )
+ * libata.  (implements struct pci_driver.probe() )
  *
  * @pdev: instance of pci_dev found
  * @ent:  matching entry in the id_tbl[]
@@ -756,14 +784,21 @@ static int __devinit pdc2027x_init_one(struct pci_dev *pdev, const struct pci_de
 {
 	static int printed_version;
 	unsigned int board_idx = (unsigned int) ent->driver_data;
-
-	struct ata_probe_ent *probe_ent;
+	const struct ata_port_info *ppi[] =
+		{ &pdc2027x_port_info[board_idx], NULL };
+	struct ata_host *host;
 	void __iomem *mmio_base;
 	int rc;
 
 	if (!printed_version++)
 		dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
 
+	/* alloc host */
+	host = ata_host_alloc_pinfo(&pdev->dev, ppi, 2);
+	if (!host)
+		return -ENOMEM;
+
+	/* acquire resources and fill host */
 	rc = pcim_enable_device(pdev);
 	if (rc)
 		return rc;
@@ -771,6 +806,7 @@ static int __devinit pdc2027x_init_one(struct pci_dev *pdev, const struct pci_de
 	rc = pcim_iomap_regions(pdev, 1 << PDC_MMIO_BAR, DRV_NAME);
 	if (rc)
 		return rc;
+	host->iomap = pcim_iomap_table(pdev);
 
 	rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
 	if (rc)
@@ -780,46 +816,22 @@ static int __devinit pdc2027x_init_one(struct pci_dev *pdev, const struct pci_de
 	if (rc)
 		return rc;
 
-	/* Prepare the probe entry */
-	probe_ent = devm_kzalloc(&pdev->dev, sizeof(*probe_ent), GFP_KERNEL);
-	if (probe_ent == NULL)
-		return -ENOMEM;
-
-	probe_ent->dev = pci_dev_to_dev(pdev);
-	INIT_LIST_HEAD(&probe_ent->node);
-
-	probe_ent->sht		= pdc2027x_port_info[board_idx].sht;
-	probe_ent->port_flags	= pdc2027x_port_info[board_idx].flags;
-	probe_ent->pio_mask	= pdc2027x_port_info[board_idx].pio_mask;
-	probe_ent->mwdma_mask	= pdc2027x_port_info[board_idx].mwdma_mask;
-	probe_ent->udma_mask	= pdc2027x_port_info[board_idx].udma_mask;
-	probe_ent->port_ops	= pdc2027x_port_info[board_idx].port_ops;
+	mmio_base = host->iomap[PDC_MMIO_BAR];
 
-       	probe_ent->irq = pdev->irq;
-       	probe_ent->irq_flags = IRQF_SHARED;
-	probe_ent->iomap = pcim_iomap_table(pdev);
+	pdc_ata_setup_port(&host->ports[0]->ioaddr, mmio_base + 0x17c0);
+	host->ports[0]->ioaddr.bmdma_addr = mmio_base + 0x1000;
+	pdc_ata_setup_port(&host->ports[1]->ioaddr, mmio_base + 0x15c0);
+	host->ports[1]->ioaddr.bmdma_addr = mmio_base + 0x1008;
 
-	mmio_base = probe_ent->iomap[PDC_MMIO_BAR];
-
-	pdc_ata_setup_port(&probe_ent->port[0], mmio_base + 0x17c0);
-	probe_ent->port[0].bmdma_addr = mmio_base + 0x1000;
-	pdc_ata_setup_port(&probe_ent->port[1], mmio_base + 0x15c0);
-	probe_ent->port[1].bmdma_addr = mmio_base + 0x1008;
-
-	probe_ent->n_ports = 2;
-
-	pci_set_master(pdev);
 	//pci_enable_intx(pdev);
 
 	/* initialize adapter */
-	if (pdc_hardware_init(pdev, probe_ent, board_idx) != 0)
+	if (pdc_hardware_init(host, board_idx) != 0)
 		return -EIO;
 
-	if (!ata_device_add(probe_ent))
-		return -ENODEV;
-
-	devm_kfree(&pdev->dev, probe_ent);
-	return 0;
+	pci_set_master(pdev);
+	return ata_host_activate(host, pdev->irq, ata_interrupt, IRQF_SHARED,
+				 &pdc2027x_sht);
 }
 
 /**
diff --git a/drivers/ata/pata_pdc202xx_old.c b/drivers/ata/pata_pdc202xx_old.c
index 0a14933..ee636be 100644
--- a/drivers/ata/pata_pdc202xx_old.c
+++ b/drivers/ata/pata_pdc202xx_old.c
@@ -22,45 +22,17 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_pdc202xx_old"
-#define DRV_VERSION "0.4.0"
+#define DRV_VERSION "0.4.2"
 
-/**
- *	pdc2024x_pre_reset		-	probe begin
- *	@ap: ATA port
- *
- *	Set up cable type and use generic probe init
- */
-
-static int pdc2024x_pre_reset(struct ata_port *ap)
-{
-	ap->cbl = ATA_CBL_PATA40;
-	return ata_std_prereset(ap);
-}
-
-
-static void pdc2024x_error_handler(struct ata_port *ap)
-{
-	ata_bmdma_drive_eh(ap, pdc2024x_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
-}
-
-
-static int pdc2026x_pre_reset(struct ata_port *ap)
+static int pdc2026x_cable_detect(struct ata_port *ap)
 {
 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 	u16 cis;
 
 	pci_read_config_word(pdev, 0x50, &cis);
 	if (cis & (1 << (10 + ap->port_no)))
-		ap->cbl = ATA_CBL_PATA80;
-	else
-		ap->cbl = ATA_CBL_PATA40;
-
-	return ata_std_prereset(ap);
-}
-
-static void pdc2026x_error_handler(struct ata_port *ap)
-{
-	ata_bmdma_drive_eh(ap, pdc2026x_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
+		return ATA_CBL_PATA80;
+	return ATA_CBL_PATA40;
 }
 
 /**
@@ -244,7 +216,6 @@ static void pdc2026x_bmdma_stop(struct ata_queued_cmd *qc)
 
 /**
  *	pdc2026x_dev_config	-	device setup hook
- *	@ap: ATA port
  *	@adev: newly found device
  *
  *	Perform chip specific early setup. We need to lock the transfer
@@ -252,7 +223,7 @@ static void pdc2026x_bmdma_stop(struct ata_queued_cmd *qc)
  *	barf.
  */
 
-static void pdc2026x_dev_config(struct ata_port *ap, struct ata_device *adev)
+static void pdc2026x_dev_config(struct ata_device *adev)
 {
 	adev->max_sectors = 256;
 }
@@ -292,8 +263,9 @@ static struct ata_port_operations pdc2024x_port_ops = {
 
 	.freeze		= ata_bmdma_freeze,
 	.thaw		= ata_bmdma_thaw,
-	.error_handler	= pdc2024x_error_handler,
+	.error_handler	= ata_bmdma_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= ata_cable_40wire,
 
 	.bmdma_setup 	= ata_bmdma_setup,
 	.bmdma_start 	= ata_bmdma_start,
@@ -326,8 +298,9 @@ static struct ata_port_operations pdc2026x_port_ops = {
 
 	.freeze		= ata_bmdma_freeze,
 	.thaw		= ata_bmdma_thaw,
-	.error_handler	= pdc2026x_error_handler,
+	.error_handler	= ata_bmdma_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= pdc2026x_cable_detect,
 
 	.bmdma_setup 	= ata_bmdma_setup,
 	.bmdma_start 	= pdc2026x_bmdma_start,
diff --git a/drivers/ata/pata_platform.c b/drivers/ata/pata_platform.c
index 4b82a54..a0a650c 100644
--- a/drivers/ata/pata_platform.c
+++ b/drivers/ata/pata_platform.c
@@ -80,13 +80,13 @@ static struct ata_port_operations pata_platform_port_ops = {
 	.thaw			= ata_bmdma_thaw,
 	.error_handler		= ata_bmdma_error_handler,
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
+	.cable_detect		= ata_cable_unknown,
 
 	.qc_prep		= ata_qc_prep,
 	.qc_issue		= ata_qc_issue_prot,
 
 	.data_xfer		= ata_data_xfer_noirq,
 
-	.irq_handler		= ata_interrupt,
 	.irq_clear		= ata_bmdma_irq_clear,
 	.irq_on			= ata_irq_on,
 	.irq_ack		= ata_irq_ack,
@@ -135,7 +135,8 @@ static void pata_platform_setup_port(struct ata_ioports *ioaddr,
 static int __devinit pata_platform_probe(struct platform_device *pdev)
 {
 	struct resource *io_res, *ctl_res;
-	struct ata_probe_ent ae;
+	struct ata_host *host;
+	struct ata_port *ap;
 	unsigned int mmio;
 
 	/*
@@ -175,44 +176,41 @@ static int __devinit pata_platform_probe(struct platform_device *pdev)
 	/*
 	 * Now that that's out of the way, wire up the port..
 	 */
-	memset(&ae, 0, sizeof(struct ata_probe_ent));
-	INIT_LIST_HEAD(&ae.node);
-	ae.dev = &pdev->dev;
-	ae.port_ops = &pata_platform_port_ops;
-	ae.sht = &pata_platform_sht;
-	ae.n_ports = 1;
-	ae.pio_mask = pio_mask;
-	ae.irq = platform_get_irq(pdev, 0);
-	ae.irq_flags = 0;
-	ae.port_flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST;
+	host = ata_host_alloc(&pdev->dev, 1);
+	if (!host)
+		return -ENOMEM;
+	ap = host->ports[0];
+
+	ap->ops = &pata_platform_port_ops;
+	ap->pio_mask = pio_mask;
+	ap->flags |= ATA_FLAG_SLAVE_POSS;
 
 	/*
 	 * Handle the MMIO case
 	 */
 	if (mmio) {
-		ae.port[0].cmd_addr = devm_ioremap(&pdev->dev, io_res->start,
+		ap->ioaddr.cmd_addr = devm_ioremap(&pdev->dev, io_res->start,
 				io_res->end - io_res->start + 1);
-		ae.port[0].ctl_addr = devm_ioremap(&pdev->dev, ctl_res->start,
+		ap->ioaddr.ctl_addr = devm_ioremap(&pdev->dev, ctl_res->start,
 				ctl_res->end - ctl_res->start + 1);
 	} else {
-		ae.port[0].cmd_addr = devm_ioport_map(&pdev->dev, io_res->start,
+		ap->ioaddr.cmd_addr = devm_ioport_map(&pdev->dev, io_res->start,
 				io_res->end - io_res->start + 1);
-		ae.port[0].ctl_addr = devm_ioport_map(&pdev->dev, ctl_res->start,
+		ap->ioaddr.ctl_addr = devm_ioport_map(&pdev->dev, ctl_res->start,
 				ctl_res->end - ctl_res->start + 1);
 	}
-	if (!ae.port[0].cmd_addr || !ae.port[0].ctl_addr) {
+	if (!ap->ioaddr.cmd_addr || !ap->ioaddr.ctl_addr) {
 		dev_err(&pdev->dev, "failed to map IO/CTL base\n");
 		return -ENOMEM;
 	}
 
-	ae.port[0].altstatus_addr = ae.port[0].ctl_addr;
+	ap->ioaddr.altstatus_addr = ap->ioaddr.ctl_addr;
 
-	pata_platform_setup_port(&ae.port[0], pdev->dev.platform_data);
+	pata_platform_setup_port(&ap->ioaddr, pdev->dev.platform_data);
 
-	if (unlikely(ata_device_add(&ae) == 0))
-		return -ENODEV;
-
-	return 0;
+	/* activate */
+	return ata_host_activate(host, platform_get_irq(pdev, 0), ata_interrupt,
+				 0, &pata_platform_sht);
 }
 
 /**
diff --git a/drivers/ata/pata_qdi.c b/drivers/ata/pata_qdi.c
index c381001..27685ce 100644
--- a/drivers/ata/pata_qdi.c
+++ b/drivers/ata/pata_qdi.c
@@ -183,13 +183,13 @@ static struct ata_port_operations qdi6500_port_ops = {
 	.thaw		= ata_bmdma_thaw,
 	.error_handler	= ata_bmdma_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= ata_cable_40wire,
 
 	.qc_prep 	= ata_qc_prep,
 	.qc_issue	= qdi_qc_issue_prot,
 
 	.data_xfer	= qdi_data_xfer,
 
-	.irq_handler	= ata_interrupt,
 	.irq_clear	= ata_bmdma_irq_clear,
 	.irq_on		= ata_irq_on,
 	.irq_ack	= ata_irq_ack,
@@ -211,13 +211,13 @@ static struct ata_port_operations qdi6580_port_ops = {
 	.thaw		= ata_bmdma_thaw,
 	.error_handler	= ata_bmdma_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= ata_cable_40wire,
 
 	.qc_prep 	= ata_qc_prep,
 	.qc_issue	= qdi_qc_issue_prot,
 
 	.data_xfer	= qdi_data_xfer,
 
-	.irq_handler	= ata_interrupt,
 	.irq_clear	= ata_bmdma_irq_clear,
 	.irq_on		= ata_irq_on,
 	.irq_ack	= ata_irq_ack,
@@ -238,8 +238,9 @@ static struct ata_port_operations qdi6580_port_ops = {
 
 static __init int qdi_init_one(unsigned long port, int type, unsigned long io, int irq, int fast)
 {
-	struct ata_probe_ent ae;
 	struct platform_device *pdev;
+	struct ata_host *host;
+	struct ata_port *ap;
 	void __iomem *io_addr, *ctl_addr;
 	int ret;
 
@@ -257,34 +258,31 @@ static __init int qdi_init_one(unsigned long port, int type, unsigned long io, i
 	if (!io_addr || !ctl_addr)
 		goto fail;
 
-	memset(&ae, 0, sizeof(struct ata_probe_ent));
-	INIT_LIST_HEAD(&ae.node);
-	ae.dev = &pdev->dev;
+	ret = -ENOMEM;
+	host = ata_host_alloc(&pdev->dev, 1);
+	if (!host)
+		goto fail;
+	ap = host->ports[0];
 
 	if (type == 6580) {
-		ae.port_ops = &qdi6580_port_ops;
-		ae.pio_mask = 0x1F;
-		ae.port_flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST;
+		ap->ops = &qdi6580_port_ops;
+		ap->pio_mask = 0x1F;
+		ap->flags |= ATA_FLAG_SLAVE_POSS;
 	} else {
-		ae.port_ops = &qdi6500_port_ops;
-		ae.pio_mask = 0x07;	/* Actually PIO3 !IORDY is possible */
-		ae.port_flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST |
-				ATA_FLAG_NO_IORDY;
+		ap->ops = &qdi6500_port_ops;
+		ap->pio_mask = 0x07;	/* Actually PIO3 !IORDY is possible */
+		ap->flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_NO_IORDY;
 	}
 
-	ae.sht = &qdi_sht;
-	ae.n_ports = 1;
-	ae.irq = irq;
-	ae.irq_flags = 0;
-	ae.port[0].cmd_addr = io_addr;
-	ae.port[0].altstatus_addr = ctl_addr;
-	ae.port[0].ctl_addr = ctl_addr;
-	ata_std_ports(&ae.port[0]);
+	ap->ioaddr.cmd_addr = io_addr;
+	ap->ioaddr.altstatus_addr = ctl_addr;
+	ap->ioaddr.ctl_addr = ctl_addr;
+	ata_std_ports(&ap->ioaddr);
 
 	/*
 	 *	Hook in a private data structure per channel
 	 */
-	ae.private_data = &qdi_data[nr_qdi_host];
+	ap->private_data = &qdi_data[nr_qdi_host];
 
 	qdi_data[nr_qdi_host].timing = port;
 	qdi_data[nr_qdi_host].fast = fast;
@@ -292,8 +290,9 @@ static __init int qdi_init_one(unsigned long port, int type, unsigned long io, i
 
 	printk(KERN_INFO DRV_NAME": qd%d at 0x%lx.\n", type, io);
 
-	ret = -ENODEV;
-	if (!ata_device_add(&ae))
+	/* activate */
+	ret = ata_host_activate(host, irq, ata_interrupt, 0, &qdi_sht);
+	if (ret)
 		goto fail;
 
 	qdi_host[nr_qdi_host++] = dev_get_drvdata(&pdev->dev);
diff --git a/drivers/ata/pata_radisys.c b/drivers/ata/pata_radisys.c
index 9a9132c..1c54673 100644
--- a/drivers/ata/pata_radisys.c
+++ b/drivers/ata/pata_radisys.c
@@ -24,40 +24,12 @@
 #include <linux/ata.h>
 
 #define DRV_NAME	"pata_radisys"
-#define DRV_VERSION	"0.4.1"
-
-/**
- *	radisys_probe_init		-	probe begin
- *	@ap: ATA port
- *
- *	Set up cable type and use generic probe init
- */
-
-static int radisys_pre_reset(struct ata_port *ap)
-{
-	ap->cbl = ATA_CBL_PATA80;
-	return ata_std_prereset(ap);
-}
-
-
-/**
- *	radisys_pata_error_handler - Probe specified port on PATA host controller
- *	@ap: Port to probe
- *	@classes:
- *
- *	LOCKING:
- *	None (inherited from caller).
- */
-
-static void radisys_pata_error_handler(struct ata_port *ap)
-{
-	ata_bmdma_drive_eh(ap, radisys_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
-}
+#define DRV_VERSION	"0.4.4"
 
 /**
  *	radisys_set_piomode - Initialize host controller PATA PIO timings
- *	@ap: Port whose timings we are configuring
- *	@adev: um
+ *	@ap: ATA port
+ *	@adev: Device whose timings we are configuring
  *
  *	Set PIO mode for device, in host controller PCI config space.
  *
@@ -248,8 +220,9 @@ static const struct ata_port_operations radisys_pata_ops = {
 
 	.freeze			= ata_bmdma_freeze,
 	.thaw			= ata_bmdma_thaw,
-	.error_handler		= radisys_pata_error_handler,
+	.error_handler		= ata_bmdma_error_handler,
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
+	.cable_detect		= ata_cable_unknown,
 
 	.bmdma_setup		= ata_bmdma_setup,
 	.bmdma_start		= ata_bmdma_start,
diff --git a/drivers/ata/pata_rz1000.c b/drivers/ata/pata_rz1000.c
index f522daa..85c4529 100644
--- a/drivers/ata/pata_rz1000.c
+++ b/drivers/ata/pata_rz1000.c
@@ -25,31 +25,6 @@
 
 
 /**
- *	rz1000_prereset		-	probe begin
- *	@ap: ATA port
- *
- *	Set up cable type and use generics
- */
-
-static int rz1000_prereset(struct ata_port *ap)
-{
-	ap->cbl = ATA_CBL_PATA40;
-	return ata_std_prereset(ap);
-}
-
-/**
- *	rz1000_error_handler		-	probe reset
- *	@ap: ATA port
- *
- *	Perform the ATA standard reset sequence
- */
-
-static void rz1000_error_handler(struct ata_port *ap)
-{
-	ata_bmdma_drive_eh(ap, rz1000_prereset, ata_std_softreset, NULL, ata_std_postreset);
-}
-
-/**
  *	rz1000_set_mode		-	mode setting function
  *	@ap: ATA interface
  *	@unused: returned device on set_mode failure
@@ -122,8 +97,9 @@ static struct ata_port_operations rz1000_port_ops = {
 
 	.freeze		= ata_bmdma_freeze,
 	.thaw		= ata_bmdma_thaw,
-	.error_handler	= rz1000_error_handler,
+	.error_handler	= ata_bmdma_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= ata_cable_40wire,
 
 	.irq_handler	= ata_interrupt,
 	.irq_clear	= ata_bmdma_irq_clear,
diff --git a/drivers/ata/pata_sc1200.c b/drivers/ata/pata_sc1200.c
index 93b3ed0..66e8ff4 100644
--- a/drivers/ata/pata_sc1200.c
+++ b/drivers/ata/pata_sc1200.c
@@ -216,6 +216,7 @@ static struct ata_port_operations sc1200_port_ops = {
 	.thaw		= ata_bmdma_thaw,
 	.error_handler	= ata_bmdma_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= ata_cable_40wire,
 
 	.bmdma_setup 	= ata_bmdma_setup,
 	.bmdma_start 	= ata_bmdma_start,
diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c
index f3ed141..5df354d 100644
--- a/drivers/ata/pata_scc.c
+++ b/drivers/ata/pata_scc.c
@@ -1016,7 +1016,6 @@ static const struct ata_port_operations scc_pata_ops = {
 	.error_handler		= scc_error_handler,
 	.post_internal_cmd	= scc_bmdma_stop,
 
-	.irq_handler		= ata_interrupt,
 	.irq_clear		= scc_bmdma_irq_clear,
 	.irq_on			= scc_irq_on,
 	.irq_ack		= scc_irq_ack,
@@ -1027,7 +1026,6 @@ static const struct ata_port_operations scc_pata_ops = {
 
 static struct ata_port_info scc_port_info[] = {
 	{
-		.sht		= &scc_sht,
 		.flags		= ATA_FLAG_SLAVE_POSS | ATA_FLAG_MMIO | ATA_FLAG_NO_LEGACY,
 		.pio_mask	= 0x1f,	/* pio0-4 */
 		.mwdma_mask	= 0x00,
@@ -1040,10 +1038,10 @@ static struct ata_port_info scc_port_info[] = {
  *	scc_reset_controller - initialize SCC PATA controller.
  */
 
-static int scc_reset_controller(struct ata_probe_ent *probe_ent)
+static int scc_reset_controller(struct ata_host *host)
 {
-	void __iomem *ctrl_base = probe_ent->iomap[SCC_CTRL_BAR];
-	void __iomem *bmid_base = probe_ent->iomap[SCC_BMID_BAR];
+	void __iomem *ctrl_base = host->iomap[SCC_CTRL_BAR];
+	void __iomem *bmid_base = host->iomap[SCC_BMID_BAR];
 	void __iomem *cckctrl_port = ctrl_base + SCC_CTL_CCKCTRL;
 	void __iomem *mode_port = ctrl_base + SCC_CTL_MODEREG;
 	void __iomem *ecmode_port = ctrl_base + SCC_CTL_ECMODE;
@@ -1104,17 +1102,15 @@ static void scc_setup_ports (struct ata_ioports *ioaddr, void __iomem *base)
 	ioaddr->command_addr = ioaddr->cmd_addr + SCC_REG_CMD;
 }
 
-static int scc_host_init(struct ata_probe_ent *probe_ent)
+static int scc_host_init(struct ata_host *host)
 {
-	struct pci_dev *pdev = to_pci_dev(probe_ent->dev);
+	struct pci_dev *pdev = to_pci_dev(host->dev);
 	int rc;
 
-	rc = scc_reset_controller(probe_ent);
+	rc = scc_reset_controller(host);
 	if (rc)
 		return rc;
 
-	probe_ent->n_ports = 1;
-
 	rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
 	if (rc)
 		return rc;
@@ -1122,7 +1118,7 @@ static int scc_host_init(struct ata_probe_ent *probe_ent)
 	if (rc)
 		return rc;
 
-	scc_setup_ports(&probe_ent->port[0], probe_ent->iomap[SCC_BMID_BAR]);
+	scc_setup_ports(&host->ports[0]->ioaddr, host->iomap[SCC_BMID_BAR]);
 
 	pci_set_master(pdev);
 
@@ -1145,14 +1141,18 @@ static int scc_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 {
 	static int printed_version;
 	unsigned int board_idx = (unsigned int) ent->driver_data;
+	const struct ata_port_info *ppi[] = { &scc_port_info[board_idx], NULL };
 	struct device *dev = &pdev->dev;
-	struct ata_probe_ent *probe_ent;
 	int rc;
 
 	if (!printed_version++)
 		dev_printk(KERN_DEBUG, &pdev->dev,
 			   "version " DRV_VERSION "\n");
 
+	host = ata_port_alloc_pinfo(&pdev->dev, ppi, 1);
+	if (!host)
+		return -ENOMEM;
+
 	rc = pcim_enable_device(pdev);
 	if (rc)
 		return rc;
@@ -1162,33 +1162,14 @@ static int scc_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 		pcim_pin_device(pdev);
 	if (rc)
 		return rc;
+	host->iomap = pcim_iomap_table(pdev);
 
-	probe_ent = devm_kzalloc(dev, sizeof(*probe_ent), GFP_KERNEL);
-	if (!probe_ent)
-		return -ENOMEM;
-
-	probe_ent->dev = dev;
-	INIT_LIST_HEAD(&probe_ent->node);
-
-	probe_ent->sht 		= scc_port_info[board_idx].sht;
-	probe_ent->port_flags 	= scc_port_info[board_idx].flags;
-	probe_ent->pio_mask 	= scc_port_info[board_idx].pio_mask;
-	probe_ent->udma_mask 	= scc_port_info[board_idx].udma_mask;
-	probe_ent->port_ops 	= scc_port_info[board_idx].port_ops;
-
-	probe_ent->irq = pdev->irq;
-	probe_ent->irq_flags = IRQF_SHARED;
-	probe_ent->iomap = pcim_iomap_table(pdev);
-
-	rc = scc_host_init(probe_ent);
+	rc = scc_host_init(host);
 	if (rc)
 		return rc;
 
-	if (!ata_device_add(probe_ent))
-		return -ENODEV;
-
-	devm_kfree(dev, probe_ent);
-	return 0;
+	return ata_host_activate(host, pdev->irq, ata_interrupt, IRQF_SHARED,
+				 &scc_sht);
 }
 
 static struct pci_driver scc_pci_driver = {
diff --git a/drivers/ata/pata_serverworks.c b/drivers/ata/pata_serverworks.c
index 598eef8..3956ef2 100644
--- a/drivers/ata/pata_serverworks.c
+++ b/drivers/ata/pata_serverworks.c
@@ -1,5 +1,5 @@
 /*
- * ata-serverworks.c 	- Serverworks PATA for new ATA layer
+ * pata_serverworks.c 	- Serverworks PATA for new ATA layer
  *			  (C) 2005 Red Hat Inc
  *			  Alan Cox <alan@redhat.com>
  *
@@ -137,14 +137,14 @@ static struct sv_cable_table cable_detect[] = {
 };
 
 /**
- *	serverworks_pre_reset		-	cable detection
+ *	serverworks_cable_detect	-	cable detection
  *	@ap: ATA port
  *
  *	Perform cable detection according to the device and subvendor
  *	identifications
  */
 
-static int serverworks_pre_reset(struct ata_port *ap) {
+static int serverworks_cable_detect(struct ata_port *ap) {
 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 	struct sv_cable_table *cb = cable_detect;
 
@@ -152,8 +152,7 @@ static int serverworks_pre_reset(struct ata_port *ap) {
 		if (cb->device == pdev->device &&
 		    (cb->subvendor == pdev->subsystem_vendor ||
 		      cb->subvendor == PCI_ANY_ID)) {
-			ap->cbl = cb->cable_detect(ap);
-			return ata_std_prereset(ap);
+			return cb->cable_detect(ap);
 		}
 		cb++;
 	}
@@ -162,11 +161,6 @@ static int serverworks_pre_reset(struct ata_port *ap) {
 	return -1;	/* kill compiler warning */
 }
 
-static void serverworks_error_handler(struct ata_port *ap)
-{
-	return ata_bmdma_drive_eh(ap, serverworks_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
-}
-
 /**
  *	serverworks_is_csb	-	Check for CSB or OSB
  *	@pdev: PCI device to check
@@ -191,31 +185,31 @@ static u8 serverworks_is_csb(struct pci_dev *pdev)
 
 /**
  *	serverworks_osb4_filter	-	mode selection filter
- *	@ap: ATA interface
  *	@adev: ATA device
+ *	@mask: Mask of proposed modes
  *
  *	Filter the offered modes for the device to apply controller
  *	specific rules. OSB4 requires no UDMA for disks due to a FIFO
  *	bug we hit.
  */
 
-static unsigned long serverworks_osb4_filter(const struct ata_port *ap, struct ata_device *adev, unsigned long mask)
+static unsigned long serverworks_osb4_filter(struct ata_device *adev, unsigned long mask)
 {
 	if (adev->class == ATA_DEV_ATA)
 		mask &= ~ATA_MASK_UDMA;
-	return ata_pci_default_filter(ap, adev, mask);
+	return ata_pci_default_filter(adev, mask);
 }
 
 
 /**
  *	serverworks_csb_filter	-	mode selection filter
- *	@ap: ATA interface
  *	@adev: ATA device
+ *	@mask: Mask of proposed modes
  *
  *	Check the blacklist and disable UDMA5 if matched
  */
 
-static unsigned long serverworks_csb_filter(const struct ata_port *ap, struct ata_device *adev, unsigned long mask)
+static unsigned long serverworks_csb_filter(struct ata_device *adev, unsigned long mask)
 {
 	const char *p;
 	char model_num[ATA_ID_PROD_LEN + 1];
@@ -223,7 +217,7 @@ static unsigned long serverworks_csb_filter(const struct ata_port *ap, struct at
 
 	/* Disk, UDMA */
 	if (adev->class != ATA_DEV_ATA)
-		return ata_pci_default_filter(ap, adev, mask);
+		return ata_pci_default_filter(adev, mask);
 
 	/* Actually do need to check */
 	ata_id_c_string(adev->id, model_num, ATA_ID_PROD, sizeof(model_num));
@@ -232,7 +226,7 @@ static unsigned long serverworks_csb_filter(const struct ata_port *ap, struct at
 		if (!strcmp(p, model_num))
 			mask &= ~(0x1F << ATA_SHIFT_UDMA);
 	}
-	return ata_pci_default_filter(ap, adev, mask);
+	return ata_pci_default_filter(adev, mask);
 }
 
 
@@ -339,8 +333,9 @@ static struct ata_port_operations serverworks_osb4_port_ops = {
 
 	.freeze		= ata_bmdma_freeze,
 	.thaw		= ata_bmdma_thaw,
-	.error_handler	= serverworks_error_handler,
+	.error_handler	= ata_bmdma_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= serverworks_cable_detect,
 
 	.bmdma_setup 	= ata_bmdma_setup,
 	.bmdma_start 	= ata_bmdma_start,
@@ -374,8 +369,9 @@ static struct ata_port_operations serverworks_csb_port_ops = {
 
 	.freeze		= ata_bmdma_freeze,
 	.thaw		= ata_bmdma_thaw,
-	.error_handler	= serverworks_error_handler,
+	.error_handler	= ata_bmdma_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= serverworks_cable_detect,
 
 	.bmdma_setup 	= ata_bmdma_setup,
 	.bmdma_start 	= ata_bmdma_start,
diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c
index dab2889..6770820 100644
--- a/drivers/ata/pata_sil680.c
+++ b/drivers/ata/pata_sil680.c
@@ -33,7 +33,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_sil680"
-#define DRV_VERSION "0.4.5"
+#define DRV_VERSION "0.4.6"
 
 /**
  *	sil680_selreg		-	return register base
@@ -91,12 +91,6 @@ static int sil680_cable_detect(struct ata_port *ap) {
 		return ATA_CBL_PATA40;
 }
 
-static int sil680_pre_reset(struct ata_port *ap)
-{
-	ap->cbl = sil680_cable_detect(ap);
-	return ata_std_prereset(ap);
-}
-
 /**
  *	sil680_bus_reset	-	reset the SIL680 bus
  *	@ap: ATA port to reset
@@ -119,7 +113,7 @@ static int sil680_bus_reset(struct ata_port *ap,unsigned int *classes)
 
 static void sil680_error_handler(struct ata_port *ap)
 {
-	ata_bmdma_drive_eh(ap, sil680_pre_reset, sil680_bus_reset, NULL, ata_std_postreset);
+	ata_bmdma_drive_eh(ap, ata_std_prereset, sil680_bus_reset, NULL, ata_std_postreset);
 }
 
 /**
@@ -257,6 +251,7 @@ static struct ata_port_operations sil680_port_ops = {
 	.thaw		= ata_bmdma_thaw,
 	.error_handler	= sil680_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= sil680_cable_detect,
 
 	.bmdma_setup 	= ata_bmdma_setup,
 	.bmdma_start 	= ata_bmdma_start,
diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c
index 8dc3bc4..a3fbcee 100644
--- a/drivers/ata/pata_sis.c
+++ b/drivers/ata/pata_sis.c
@@ -35,7 +35,7 @@
 #include "sis.h"
 
 #define DRV_NAME	"pata_sis"
-#define DRV_VERSION	"0.5.0"
+#define DRV_VERSION	"0.5.1"
 
 struct sis_chipset {
 	u16 device;			/* PCI host ID */
@@ -86,106 +86,55 @@ static int sis_port_base(struct ata_device *adev)
 }
 
 /**
- *	sis_133_pre_reset	-	check for 40/80 pin
+ *	sis_133_cable_detect	-	check for 40/80 pin
  *	@ap: Port
  *
  *	Perform cable detection for the later UDMA133 capable
  *	SiS chipset.
  */
 
-static int sis_133_pre_reset(struct ata_port *ap)
+static int sis_133_cable_detect(struct ata_port *ap)
 {
-	static const struct pci_bits sis_enable_bits[] = {
-		{ 0x4aU, 1U, 0x02UL, 0x02UL },	/* port 0 */
-		{ 0x4aU, 1U, 0x04UL, 0x04UL },	/* port 1 */
-	};
-
 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 	u16 tmp;
 
-	if (!pci_test_config_bits(pdev, &sis_enable_bits[ap->port_no]))
-		return -ENOENT;
-
 	/* The top bit of this register is the cable detect bit */
 	pci_read_config_word(pdev, 0x50 + 2 * ap->port_no, &tmp);
 	if ((tmp & 0x8000) && !sis_short_ata40(pdev))
-		ap->cbl = ATA_CBL_PATA40;
-	else
-		ap->cbl = ATA_CBL_PATA80;
-
-	return ata_std_prereset(ap);
+		return ATA_CBL_PATA40;
+	return ATA_CBL_PATA80;
 }
 
 /**
- *	sis_error_handler - Probe specified port on PATA host controller
- *	@ap: Port to probe
- *
- *	LOCKING:
- *	None (inherited from caller).
- */
-
-static void sis_133_error_handler(struct ata_port *ap)
-{
-	ata_bmdma_drive_eh(ap, sis_133_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
-}
-
-
-/**
- *	sis_66_pre_reset	-	check for 40/80 pin
+ *	sis_66_cable_detect	-	check for 40/80 pin
  *	@ap: Port
  *
  *	Perform cable detection on the UDMA66, UDMA100 and early UDMA133
  *	SiS IDE controllers.
  */
 
-static int sis_66_pre_reset(struct ata_port *ap)
+static int sis_66_cable_detect(struct ata_port *ap)
 {
-	static const struct pci_bits sis_enable_bits[] = {
-		{ 0x4aU, 1U, 0x02UL, 0x02UL },	/* port 0 */
-		{ 0x4aU, 1U, 0x04UL, 0x04UL },	/* port 1 */
-	};
-
 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 	u8 tmp;
 
-	if (!pci_test_config_bits(pdev, &sis_enable_bits[ap->port_no])) {
-		ata_port_disable(ap);
-		ata_port_printk(ap, KERN_INFO, "port disabled. ignoring.\n");
-		return 0;
-	}
 	/* Older chips keep cable detect in bits 4/5 of reg 0x48 */
 	pci_read_config_byte(pdev, 0x48, &tmp);
 	tmp >>= ap->port_no;
 	if ((tmp & 0x10) && !sis_short_ata40(pdev))
-		ap->cbl = ATA_CBL_PATA40;
-	else
-		ap->cbl = ATA_CBL_PATA80;
-
-	return ata_std_prereset(ap);
+		return ATA_CBL_PATA40;
+	return ATA_CBL_PATA80;
 }
 
-/**
- *	sis_66_error_handler - Probe specified port on PATA host controller
- *	@ap: Port to probe
- *	@classes:
- *
- *	LOCKING:
- *	None (inherited from caller).
- */
-
-static void sis_66_error_handler(struct ata_port *ap)
-{
-	ata_bmdma_drive_eh(ap, sis_66_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
-}
 
 /**
- *	sis_old_pre_reset		-	probe begin
+ *	sis_pre_reset		-	probe begin
  *	@ap: ATA port
  *
  *	Set up cable type and use generic probe init
  */
 
-static int sis_old_pre_reset(struct ata_port *ap)
+static int sis_pre_reset(struct ata_port *ap)
 {
 	static const struct pci_bits sis_enable_bits[] = {
 		{ 0x4aU, 1U, 0x02UL, 0x02UL },	/* port 0 */
@@ -194,27 +143,23 @@ static int sis_old_pre_reset(struct ata_port *ap)
 
 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 
-	if (!pci_test_config_bits(pdev, &sis_enable_bits[ap->port_no])) {
-		ata_port_disable(ap);
-		ata_port_printk(ap, KERN_INFO, "port disabled. ignoring.\n");
-		return 0;
-	}
-	ap->cbl = ATA_CBL_PATA40;
+	if (!pci_test_config_bits(pdev, &sis_enable_bits[ap->port_no]))
+		return -ENOENT;
 	return ata_std_prereset(ap);
 }
 
 
 /**
- *	sis_old_error_handler - Probe specified port on PATA host controller
+ *	sis_error_handler - Probe specified port on PATA host controller
  *	@ap: Port to probe
  *
  *	LOCKING:
  *	None (inherited from caller).
  */
 
-static void sis_old_error_handler(struct ata_port *ap)
+static void sis_error_handler(struct ata_port *ap)
 {
-	ata_bmdma_drive_eh(ap, sis_old_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
+	ata_bmdma_drive_eh(ap, sis_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
 }
 
 /**
@@ -494,7 +439,7 @@ static void sis_133_early_set_dmamode (struct ata_port *ap, struct ata_device *a
 	int drive_pci = sis_port_base(adev);
 	u16 timing;
 
-	const u16 udma_bits[]  = { 0x8F00, 0x8A00, 0x8700, 0x8500, 0x8300, 0x8200, 0x8100};
+	static const u16 udma_bits[]  = { 0x8F00, 0x8A00, 0x8700, 0x8500, 0x8300, 0x8200, 0x8100};
 
 	pci_read_config_word(pdev, drive_pci, &timing);
 
@@ -531,8 +476,8 @@ static void sis_133_set_dmamode (struct ata_port *ap, struct ata_device *adev)
 	u32 reg54;
 
 	/* bits 4- cycle time 8 - cvs time */
-	const u32 timing_u100[] = { 0x6B0, 0x470, 0x350, 0x140, 0x120, 0x110, 0x000 };
-	const u32 timing_u133[] = { 0x9F0, 0x6A0, 0x470, 0x250, 0x230, 0x220, 0x210 };
+	static const u32 timing_u100[] = { 0x6B0, 0x470, 0x350, 0x140, 0x120, 0x110, 0x000 };
+	static const u32 timing_u133[] = { 0x9F0, 0x6A0, 0x470, 0x250, 0x230, 0x220, 0x210 };
 
 	/* If bit 14 is set then the registers are mapped at 0x70 not 0x40 */
 	pci_read_config_dword(pdev, 0x54, &reg54);
@@ -595,8 +540,9 @@ static const struct ata_port_operations sis_133_ops = {
 
 	.freeze			= ata_bmdma_freeze,
 	.thaw			= ata_bmdma_thaw,
-	.error_handler		= sis_133_error_handler,
+	.error_handler		= sis_error_handler,
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
+	.cable_detect		= sis_133_cable_detect,
 
 	.bmdma_setup		= ata_bmdma_setup,
 	.bmdma_start		= ata_bmdma_start,
@@ -628,8 +574,9 @@ static const struct ata_port_operations sis_133_early_ops = {
 
 	.freeze			= ata_bmdma_freeze,
 	.thaw			= ata_bmdma_thaw,
-	.error_handler		= sis_66_error_handler,
+	.error_handler		= sis_error_handler,
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
+	.cable_detect		= sis_66_cable_detect,
 
 	.bmdma_setup		= ata_bmdma_setup,
 	.bmdma_start		= ata_bmdma_start,
@@ -661,9 +608,9 @@ static const struct ata_port_operations sis_100_ops = {
 
 	.freeze			= ata_bmdma_freeze,
 	.thaw			= ata_bmdma_thaw,
-	.error_handler		= sis_66_error_handler,
+	.error_handler		= sis_error_handler,
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
-
+	.cable_detect		= sis_66_cable_detect,
 
 	.bmdma_setup		= ata_bmdma_setup,
 	.bmdma_start		= ata_bmdma_start,
@@ -692,10 +639,11 @@ static const struct ata_port_operations sis_66_ops = {
 	.check_status		= ata_check_status,
 	.exec_command		= ata_exec_command,
 	.dev_select		= ata_std_dev_select,
+	.cable_detect		= sis_66_cable_detect,
 
 	.freeze			= ata_bmdma_freeze,
 	.thaw			= ata_bmdma_thaw,
-	.error_handler		= sis_66_error_handler,
+	.error_handler		= sis_error_handler,
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
 
 	.bmdma_setup		= ata_bmdma_setup,
@@ -728,8 +676,9 @@ static const struct ata_port_operations sis_old_ops = {
 
 	.freeze			= ata_bmdma_freeze,
 	.thaw			= ata_bmdma_thaw,
-	.error_handler		= sis_old_error_handler,
+	.error_handler		= sis_error_handler,
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
+	.cable_detect		= ata_cable_40wire,
 
 	.bmdma_setup		= ata_bmdma_setup,
 	.bmdma_start		= ata_bmdma_start,
diff --git a/drivers/ata/pata_sl82c105.c b/drivers/ata/pata_sl82c105.c
index b681441..da9e22b 100644
--- a/drivers/ata/pata_sl82c105.c
+++ b/drivers/ata/pata_sl82c105.c
@@ -58,7 +58,6 @@ static int sl82c105_pre_reset(struct ata_port *ap)
 
 	if (ap->port_no && !pci_test_config_bits(pdev, &sl82c105_enable_bits[ap->port_no]))
 		return -ENOENT;
-	ap->cbl = ATA_CBL_PATA40;
 	return ata_std_prereset(ap);
 }
 
@@ -238,6 +237,7 @@ static struct ata_port_operations sl82c105_port_ops = {
 	.thaw		= ata_bmdma_thaw,
 	.error_handler	= sl82c105_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= ata_cable_40wire,
 
 	.bmdma_setup 	= ata_bmdma_setup,
 	.bmdma_start 	= sl82c105_bmdma_start,
diff --git a/drivers/ata/pata_triflex.c b/drivers/ata/pata_triflex.c
index 71418f2..e618ffd 100644
--- a/drivers/ata/pata_triflex.c
+++ b/drivers/ata/pata_triflex.c
@@ -43,7 +43,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_triflex"
-#define DRV_VERSION "0.2.7"
+#define DRV_VERSION "0.2.8"
 
 /**
  *	triflex_prereset		-	probe begin
@@ -63,7 +63,6 @@ static int triflex_prereset(struct ata_port *ap)
 
 	if (!pci_test_config_bits(pdev, &triflex_enable_bits[ap->port_no]))
 		return -ENOENT;
-	ap->cbl = ATA_CBL_PATA40;
 	return ata_std_prereset(ap);
 }
 
@@ -214,6 +213,7 @@ static struct ata_port_operations triflex_port_ops = {
 	.thaw		= ata_bmdma_thaw,
 	.error_handler	= triflex_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= ata_cable_40wire,
 
 	.bmdma_setup 	= ata_bmdma_setup,
 	.bmdma_start 	= triflex_bmdma_start,
diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c
index 946ade0..96b7179 100644
--- a/drivers/ata/pata_via.c
+++ b/drivers/ata/pata_via.c
@@ -62,7 +62,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_via"
-#define DRV_VERSION "0.2.1"
+#define DRV_VERSION "0.3.1"
 
 /*
  *	The following comes directly from Vojtech Pavlik's ide/pci/via82cxxx
@@ -135,16 +135,23 @@ static const struct via_isa_bridge {
  */
 
 static int via_cable_detect(struct ata_port *ap) {
+	const struct via_isa_bridge *config = ap->host->private_data;
 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 	u32 ata66;
 
+	/* Early chips are 40 wire */
+	if ((config->flags & VIA_UDMA) < VIA_UDMA_66)
+		return ATA_CBL_PATA40;
+	/* UDMA 66 chips have only drive side logic */
+	else if((config->flags & VIA_UDMA) < VIA_UDMA_100)
+		return ATA_CBL_PATA_UNK;
+	/* UDMA 100 or later */
 	pci_read_config_dword(pdev, 0x50, &ata66);
 	/* Check both the drive cable reporting bits, we might not have
 	   two drives */
 	if (ata66 & (0x10100000 >> (16 * ap->port_no)))
 		return ATA_CBL_PATA80;
-	else
-		return ATA_CBL_PATA40;
+	return ATA_CBL_PATA40;
 }
 
 static int via_pre_reset(struct ata_port *ap)
@@ -156,22 +163,10 @@ static int via_pre_reset(struct ata_port *ap)
 			{ 0x40, 1, 0x02, 0x02 },
 			{ 0x40, 1, 0x01, 0x01 }
 		};
-
 		struct pci_dev *pdev = to_pci_dev(ap->host->dev);
-
 		if (!pci_test_config_bits(pdev, &via_enable_bits[ap->port_no]))
 			return -ENOENT;
 	}
-
-	if ((config->flags & VIA_UDMA) >= VIA_UDMA_100)
-		ap->cbl = via_cable_detect(ap);
-	/* The UDMA66 series has no cable detect so do drive side detect */
-	else if ((config->flags & VIA_UDMA) < VIA_UDMA_66)
-		ap->cbl = ATA_CBL_PATA40;
-	else
-		ap->cbl = ATA_CBL_PATA_UNK;
-
-
 	return ata_std_prereset(ap);
 }
 
@@ -327,6 +322,7 @@ static struct ata_port_operations via_port_ops = {
 	.thaw		= ata_bmdma_thaw,
 	.error_handler	= via_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= via_cable_detect,
 
 	.bmdma_setup 	= ata_bmdma_setup,
 	.bmdma_start 	= ata_bmdma_start,
@@ -362,6 +358,7 @@ static struct ata_port_operations via_port_ops_noirq = {
 	.thaw		= ata_bmdma_thaw,
 	.error_handler	= via_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= via_cable_detect,
 
 	.bmdma_setup 	= ata_bmdma_setup,
 	.bmdma_start 	= ata_bmdma_start,
diff --git a/drivers/ata/pata_winbond.c b/drivers/ata/pata_winbond.c
index 6c11103..cc4ad27 100644
--- a/drivers/ata/pata_winbond.c
+++ b/drivers/ata/pata_winbond.c
@@ -8,7 +8,6 @@
 
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/pci.h>
 #include <linux/init.h>
 #include <linux/blkdev.h>
 #include <linux/delay.h>
@@ -36,7 +35,7 @@ static int probe_winbond = 1;
 static int probe_winbond;
 #endif
 
-static spinlock_t winbond_lock = SPIN_LOCK_UNLOCKED;
+static DEFINE_SPINLOCK(winbond_lock);
 
 static void winbond_writecfg(unsigned long port, u8 reg, u8 val)
 {
@@ -152,13 +151,13 @@ static struct ata_port_operations winbond_port_ops = {
 	.thaw		= ata_bmdma_thaw,
 	.error_handler	= ata_bmdma_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= ata_cable_40wire,
 
 	.qc_prep 	= ata_qc_prep,
 	.qc_issue	= ata_qc_issue_prot,
 
 	.data_xfer	= winbond_data_xfer,
 
-	.irq_handler	= ata_interrupt,
 	.irq_clear	= ata_bmdma_irq_clear,
 	.irq_on		= ata_irq_on,
 	.irq_ack	= ata_irq_ack,
@@ -179,11 +178,9 @@ static struct ata_port_operations winbond_port_ops = {
 
 static __init int winbond_init_one(unsigned long port)
 {
-	struct ata_probe_ent ae;
 	struct platform_device *pdev;
-	int ret;
 	u8 reg;
-	int i;
+	int i, rc;
 
 	reg = winbond_readcfg(port, 0x81);
 	reg |= 0x80;	/* jumpered mode off */
@@ -202,58 +199,56 @@ static __init int winbond_init_one(unsigned long port)
 
 	for (i = 0; i < 2 ; i ++) {
 		unsigned long cmd_port = 0x1F0 - (0x80 * i);
+		struct ata_host *host;
+		struct ata_port *ap;
 		void __iomem *cmd_addr, *ctl_addr;
 
-		if (reg & (1 << i)) {
-			/*
-			 *	Fill in a probe structure first of all
-			 */
-
-			pdev = platform_device_register_simple(DRV_NAME, nr_winbond_host, NULL, 0);
-			if (IS_ERR(pdev))
-				return PTR_ERR(pdev);
-
-			cmd_addr = devm_ioport_map(&pdev->dev, cmd_port, 8);
-			ctl_addr = devm_ioport_map(&pdev->dev, cmd_port + 0x0206, 1);
-			if (!cmd_addr || !ctl_addr) {
-				platform_device_unregister(pdev);
-				return -ENOMEM;
-			}
-
-			memset(&ae, 0, sizeof(struct ata_probe_ent));
-			INIT_LIST_HEAD(&ae.node);
-			ae.dev = &pdev->dev;
-
-			ae.port_ops = &winbond_port_ops;
-			ae.pio_mask = 0x1F;
-
-			ae.sht = &winbond_sht;
-
-			ae.n_ports = 1;
-			ae.irq = 14 + i;
-			ae.irq_flags = 0;
-			ae.port_flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST;
-			ae.port[0].cmd_addr = cmd_addr;
-			ae.port[0].altstatus_addr = ctl_addr;
-			ae.port[0].ctl_addr = ctl_addr;
-			ata_std_ports(&ae.port[0]);
-			/*
-			 *	Hook in a private data structure per channel
-			 */
-			ae.private_data = &winbond_data[nr_winbond_host];
-			winbond_data[nr_winbond_host].config = port;
-			winbond_data[nr_winbond_host].platform_dev = pdev;
-
-			ret = ata_device_add(&ae);
-			if (ret == 0) {
-				platform_device_unregister(pdev);
-				return -ENODEV;
-			}
-			winbond_host[nr_winbond_host++] = dev_get_drvdata(&pdev->dev);
-		}
+		if (!(reg & (1 << i)))
+			continue;
+
+		pdev = platform_device_register_simple(DRV_NAME, nr_winbond_host, NULL, 0);
+		if (IS_ERR(pdev))
+			return PTR_ERR(pdev);
+
+		rc = -ENOMEM;
+		host = ata_host_alloc(&pdev->dev, 1);
+		if (!host)
+			goto err_unregister;
+
+		rc = -ENOMEM;
+		cmd_addr = devm_ioport_map(&pdev->dev, cmd_port, 8);
+		ctl_addr = devm_ioport_map(&pdev->dev, cmd_port + 0x0206, 1);
+		if (!cmd_addr || !ctl_addr)
+			goto err_unregister;
+
+		ap = host->ports[0];
+		ap->ops = &winbond_port_ops;
+		ap->pio_mask = 0x1F;
+		ap->flags |= ATA_FLAG_SLAVE_POSS;
+		ap->ioaddr.cmd_addr = cmd_addr;
+		ap->ioaddr.altstatus_addr = ctl_addr;
+		ap->ioaddr.ctl_addr = ctl_addr;
+		ata_std_ports(&ap->ioaddr);
+
+		/* hook in a private data structure per channel */
+		host->private_data = &winbond_data[nr_winbond_host];
+		winbond_data[nr_winbond_host].config = port;
+		winbond_data[nr_winbond_host].platform_dev = pdev;
+
+		/* activate */
+		rc = ata_host_activate(host, 14 + i, ata_interrupt, 0,
+				       &winbond_sht);
+		if (rc)
+			goto err_unregister;
+
+		winbond_host[nr_winbond_host++] = dev_get_drvdata(&pdev->dev);
 	}
 
 	return 0;
+
+ err_unregister:
+	platform_device_unregister(pdev);
+	return rc;
 }
 
 /**
diff --git a/drivers/ata/pdc_adma.c b/drivers/ata/pdc_adma.c
index 5dd3ca8..52b6953 100644
--- a/drivers/ata/pdc_adma.c
+++ b/drivers/ata/pdc_adma.c
@@ -52,9 +52,9 @@
 /* macro to calculate base address for ADMA regs */
 #define ADMA_REGS(base,port_no)		((base) + 0x80 + ((port_no) * 0x20))
 
-/* macro to obtain addresses from ata_host */
-#define ADMA_HOST_REGS(host,port_no) \
-	ADMA_REGS((host)->iomap[ADMA_MMIO_BAR], port_no)
+/* macro to obtain addresses from ata_port */
+#define ADMA_PORT_REGS(ap) \
+	ADMA_REGS((ap)->host->iomap[ADMA_MMIO_BAR], ap->port_no)
 
 enum {
 	ADMA_MMIO_BAR		= 4,
@@ -128,7 +128,6 @@ struct adma_port_priv {
 
 static int adma_ata_init_one (struct pci_dev *pdev,
 				const struct pci_device_id *ent);
-static irqreturn_t adma_intr (int irq, void *dev_instance);
 static int adma_port_start(struct ata_port *ap);
 static void adma_host_stop(struct ata_host *host);
 static void adma_port_stop(struct ata_port *ap);
@@ -172,7 +171,6 @@ static const struct ata_port_operations adma_ata_ops = {
 	.qc_issue		= adma_qc_issue,
 	.eng_timeout		= adma_eng_timeout,
 	.data_xfer		= ata_data_xfer,
-	.irq_handler		= adma_intr,
 	.irq_clear		= adma_irq_clear,
 	.irq_on			= ata_irq_on,
 	.irq_ack		= ata_irq_ack,
@@ -186,7 +184,6 @@ static const struct ata_port_operations adma_ata_ops = {
 static struct ata_port_info adma_port_info[] = {
 	/* board_1841_idx */
 	{
-		.sht		= &adma_ata_sht,
 		.flags		= ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST |
 				  ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO |
 				  ATA_FLAG_PIO_POLLING,
@@ -229,8 +226,10 @@ static void adma_irq_clear(struct ata_port *ap)
 	/* nothing */
 }
 
-static void adma_reset_engine(void __iomem *chan)
+static void adma_reset_engine(struct ata_port *ap)
 {
+	void __iomem *chan = ADMA_PORT_REGS(ap);
+
 	/* reset ADMA to idle state */
 	writew(aPIOMD4 | aNIEN | aRSTADM, chan + ADMA_CONTROL);
 	udelay(2);
@@ -241,14 +240,14 @@ static void adma_reset_engine(void __iomem *chan)
 static void adma_reinit_engine(struct ata_port *ap)
 {
 	struct adma_port_priv *pp = ap->private_data;
-	void __iomem *chan = ADMA_HOST_REGS(ap->host, ap->port_no);
+	void __iomem *chan = ADMA_PORT_REGS(ap);
 
 	/* mask/clear ATA interrupts */
 	writeb(ATA_NIEN, ap->ioaddr.ctl_addr);
 	ata_check_status(ap);
 
 	/* reset the ADMA engine */
-	adma_reset_engine(chan);
+	adma_reset_engine(ap);
 
 	/* set in-FIFO threshold to 0x100 */
 	writew(0x100, chan + ADMA_FIFO_IN);
@@ -268,7 +267,7 @@ static void adma_reinit_engine(struct ata_port *ap)
 
 static inline void adma_enter_reg_mode(struct ata_port *ap)
 {
-	void __iomem *chan = ADMA_HOST_REGS(ap->host, ap->port_no);
+	void __iomem *chan = ADMA_PORT_REGS(ap);
 
 	writew(aPIOMD4, chan + ADMA_CONTROL);
 	readb(chan + ADMA_STATUS);	/* flush */
@@ -415,7 +414,7 @@ static void adma_qc_prep(struct ata_queued_cmd *qc)
 static inline void adma_packet_start(struct ata_queued_cmd *qc)
 {
 	struct ata_port *ap = qc->ap;
-	void __iomem *chan = ADMA_HOST_REGS(ap->host, ap->port_no);
+	void __iomem *chan = ADMA_PORT_REGS(ap);
 
 	VPRINTK("ENTER, ap %p\n", ap);
 
@@ -453,7 +452,7 @@ static inline unsigned int adma_intr_pkt(struct ata_host *host)
 		struct ata_port *ap = host->ports[port_no];
 		struct adma_port_priv *pp;
 		struct ata_queued_cmd *qc;
-		void __iomem *chan = ADMA_HOST_REGS(host, port_no);
+		void __iomem *chan = ADMA_PORT_REGS(ap);
 		u8 status = readb(chan + ADMA_STATUS);
 
 		if (status == 0)
@@ -575,7 +574,7 @@ static int adma_port_start(struct ata_port *ap)
 
 static void adma_port_stop(struct ata_port *ap)
 {
-	adma_reset_engine(ADMA_HOST_REGS(ap->host, ap->port_no));
+	adma_reset_engine(ap);
 }
 
 static void adma_host_stop(struct ata_host *host)
@@ -583,21 +582,19 @@ static void adma_host_stop(struct ata_host *host)
 	unsigned int port_no;
 
 	for (port_no = 0; port_no < ADMA_PORTS; ++port_no)
-		adma_reset_engine(ADMA_HOST_REGS(host, port_no));
+		adma_reset_engine(host->ports[port_no]);
 }
 
-static void adma_host_init(unsigned int chip_id,
-				struct ata_probe_ent *probe_ent)
+static void adma_host_init(struct ata_host *host, unsigned int chip_id)
 {
 	unsigned int port_no;
-	void __iomem *mmio_base = probe_ent->iomap[ADMA_MMIO_BAR];
 
 	/* enable/lock aGO operation */
-	writeb(7, mmio_base + ADMA_MODE_LOCK);
+	writeb(7, host->iomap[ADMA_MMIO_BAR] + ADMA_MODE_LOCK);
 
 	/* reset the ADMA logic */
 	for (port_no = 0; port_no < ADMA_PORTS; ++port_no)
-		adma_reset_engine(ADMA_REGS(mmio_base, port_no));
+		adma_reset_engine(host->ports[port_no]);
 }
 
 static int adma_set_dma_masks(struct pci_dev *pdev, void __iomem *mmio_base)
@@ -623,14 +620,21 @@ static int adma_ata_init_one(struct pci_dev *pdev,
 			     const struct pci_device_id *ent)
 {
 	static int printed_version;
-	struct ata_probe_ent *probe_ent = NULL;
-	void __iomem *mmio_base;
 	unsigned int board_idx = (unsigned int) ent->driver_data;
+	const struct ata_port_info *ppi[] = { &adma_port_info[board_idx], NULL };
+	struct ata_host *host;
+	void __iomem *mmio_base;
 	int rc, port_no;
 
 	if (!printed_version++)
 		dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
 
+	/* alloc host */
+	host = ata_host_alloc_pinfo(&pdev->dev, ppi, ADMA_PORTS);
+	if (!host)
+		return -ENOMEM;
+
+	/* acquire resources and fill host */
 	rc = pcim_enable_device(pdev);
 	if (rc)
 		return rc;
@@ -641,46 +645,23 @@ static int adma_ata_init_one(struct pci_dev *pdev,
 	rc = pcim_iomap_regions(pdev, 1 << ADMA_MMIO_BAR, DRV_NAME);
 	if (rc)
 		return rc;
-	mmio_base = pcim_iomap_table(pdev)[ADMA_MMIO_BAR];
+	host->iomap = pcim_iomap_table(pdev);
+	mmio_base = host->iomap[ADMA_MMIO_BAR];
 
 	rc = adma_set_dma_masks(pdev, mmio_base);
 	if (rc)
 		return rc;
 
-	probe_ent = devm_kzalloc(&pdev->dev, sizeof(*probe_ent), GFP_KERNEL);
-	if (probe_ent == NULL)
-		return -ENOMEM;
-
-	probe_ent->dev = pci_dev_to_dev(pdev);
-	INIT_LIST_HEAD(&probe_ent->node);
-
-	probe_ent->sht		= adma_port_info[board_idx].sht;
-	probe_ent->port_flags	= adma_port_info[board_idx].flags;
-	probe_ent->pio_mask	= adma_port_info[board_idx].pio_mask;
-	probe_ent->mwdma_mask	= adma_port_info[board_idx].mwdma_mask;
-	probe_ent->udma_mask	= adma_port_info[board_idx].udma_mask;
-	probe_ent->port_ops	= adma_port_info[board_idx].port_ops;
-
-	probe_ent->irq		= pdev->irq;
-	probe_ent->irq_flags	= IRQF_SHARED;
-	probe_ent->n_ports	= ADMA_PORTS;
-	probe_ent->iomap	= pcim_iomap_table(pdev);
-
-	for (port_no = 0; port_no < probe_ent->n_ports; ++port_no) {
-		adma_ata_setup_port(&probe_ent->port[port_no],
+	for (port_no = 0; port_no < ADMA_PORTS; ++port_no)
+		adma_ata_setup_port(&host->ports[port_no]->ioaddr,
 				    ADMA_ATA_REGS(mmio_base, port_no));
-	}
-
-	pci_set_master(pdev);
 
 	/* initialize adapter */
-	adma_host_init(board_idx, probe_ent);
+	adma_host_init(host, board_idx);
 
-	if (!ata_device_add(probe_ent))
-		return -ENODEV;
-
-	devm_kfree(&pdev->dev, probe_ent);
-	return 0;
+	pci_set_master(pdev);
+	return ata_host_activate(host, pdev->irq, adma_intr, IRQF_SHARED,
+				 &adma_ata_sht);
 }
 
 static int __init adma_ata_init(void)
diff --git a/drivers/ata/sata_inic162x.c b/drivers/ata/sata_inic162x.c
index 1e21688..f099a1d 100644
--- a/drivers/ata/sata_inic162x.c
+++ b/drivers/ata/sata_inic162x.c
@@ -488,11 +488,11 @@ static void inic_error_handler(struct ata_port *ap)
 static void inic_post_internal_cmd(struct ata_queued_cmd *qc)
 {
 	/* make DMA engine forget about the failed command */
-	if (qc->err_mask)
+	if (qc->flags & ATA_QCFLAG_FAILED)
 		inic_reset_port(inic_port_base(qc->ap));
 }
 
-static void inic_dev_config(struct ata_port *ap, struct ata_device *dev)
+static void inic_dev_config(struct ata_device *dev)
 {
 	/* inic can only handle upto LBA28 max sectors */
 	if (dev->max_sectors > ATA_MAX_SECTORS)
@@ -559,7 +559,6 @@ static struct ata_port_operations inic_port_ops = {
 	.bmdma_stop		= inic_bmdma_stop,
 	.bmdma_status		= inic_bmdma_status,
 
-	.irq_handler		= inic_interrupt,
 	.irq_clear		= inic_irq_clear,
 	.irq_on			= ata_irq_on,
 	.irq_ack		= ata_irq_ack,
@@ -580,7 +579,6 @@ static struct ata_port_operations inic_port_ops = {
 };
 
 static struct ata_port_info inic_port_info = {
-	.sht			= &inic_sht,
 	/* For some reason, ATA_PROT_ATAPI is broken on this
 	 * controller, and no, PIO_POLLING does't fix it.  It somehow
 	 * manages to report the wrong ireason and ignoring ireason
@@ -642,7 +640,9 @@ static int inic_pci_device_resume(struct pci_dev *pdev)
 	void __iomem *mmio_base = host->iomap[MMIO_BAR];
 	int rc;
 
-	ata_pci_device_do_resume(pdev);
+	rc = ata_pci_device_do_resume(pdev);
+	if (rc)
+		return rc;
 
 	if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) {
 		rc = init_controller(mmio_base, hpriv->cached_hctl);
@@ -659,8 +659,8 @@ static int inic_pci_device_resume(struct pci_dev *pdev)
 static int inic_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 {
 	static int printed_version;
-	struct ata_port_info *pinfo = &inic_port_info;
-	struct ata_probe_ent *probe_ent;
+	const struct ata_port_info *ppi[] = { &inic_port_info, NULL };
+	struct ata_host *host;
 	struct inic_host_priv *hpriv;
 	void __iomem * const *iomap;
 	int i, rc;
@@ -668,6 +668,15 @@ static int inic_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (!printed_version++)
 		dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
 
+	/* alloc host */
+	host = ata_host_alloc_pinfo(&pdev->dev, ppi, NR_PORTS);
+	hpriv = devm_kzalloc(&pdev->dev, sizeof(*hpriv), GFP_KERNEL);
+	if (!host || !hpriv)
+		return -ENOMEM;
+
+	host->private_data = hpriv;
+
+	/* acquire resources and fill host */
 	rc = pcim_enable_device(pdev);
 	if (rc)
 		return rc;
@@ -675,7 +684,22 @@ static int inic_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	rc = pcim_iomap_regions(pdev, 0x3f, DRV_NAME);
 	if (rc)
 		return rc;
-	iomap = pcim_iomap_table(pdev);
+	host->iomap = iomap = pcim_iomap_table(pdev);
+
+	for (i = 0; i < NR_PORTS; i++) {
+		struct ata_ioports *port = &host->ports[i]->ioaddr;
+		void __iomem *port_base = iomap[MMIO_BAR] + i * PORT_SIZE;
+
+		port->cmd_addr = iomap[2 * i];
+		port->altstatus_addr =
+		port->ctl_addr = (void __iomem *)
+			((unsigned long)iomap[2 * i + 1] | ATA_PCI_CTL_OFS);
+		port->scr_addr = port_base + PORT_SCR;
+
+		ata_std_ports(port);
+	}
+
+	hpriv->cached_hctl = readw(iomap[MMIO_BAR] + HOST_CTL);
 
 	/* Set dma_mask.  This devices doesn't support 64bit addressing. */
 	rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
@@ -692,43 +716,6 @@ static int inic_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 		return rc;
 	}
 
-	probe_ent = devm_kzalloc(&pdev->dev, sizeof(*probe_ent), GFP_KERNEL);
-	hpriv = devm_kzalloc(&pdev->dev, sizeof(*hpriv), GFP_KERNEL);
-	if (!probe_ent || !hpriv)
-		return -ENOMEM;
-
-	probe_ent->dev = &pdev->dev;
-	INIT_LIST_HEAD(&probe_ent->node);
-
-	probe_ent->sht			= pinfo->sht;
-	probe_ent->port_flags		= pinfo->flags;
-	probe_ent->pio_mask		= pinfo->pio_mask;
-	probe_ent->mwdma_mask		= pinfo->mwdma_mask;
-	probe_ent->udma_mask		= pinfo->udma_mask;
-	probe_ent->port_ops		= pinfo->port_ops;
-	probe_ent->n_ports		= NR_PORTS;
-
-	probe_ent->irq = pdev->irq;
-	probe_ent->irq_flags = IRQF_SHARED;
-
-	probe_ent->iomap = iomap;
-
-	for (i = 0; i < NR_PORTS; i++) {
-		struct ata_ioports *port = &probe_ent->port[i];
-		void __iomem *port_base = iomap[MMIO_BAR] + i * PORT_SIZE;
-
-		port->cmd_addr = iomap[2 * i];
-		port->altstatus_addr =
-		port->ctl_addr = (void __iomem *)
-			((unsigned long)iomap[2 * i + 1] | ATA_PCI_CTL_OFS);
-		port->scr_addr = port_base + PORT_SCR;
-
-		ata_std_ports(port);
-	}
-
-	probe_ent->private_data = hpriv;
-	hpriv->cached_hctl = readw(iomap[MMIO_BAR] + HOST_CTL);
-
 	rc = init_controller(iomap[MMIO_BAR], hpriv->cached_hctl);
 	if (rc) {
 		dev_printk(KERN_ERR, &pdev->dev,
@@ -737,13 +724,8 @@ static int inic_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	}
 
 	pci_set_master(pdev);
-
-	if (!ata_device_add(probe_ent))
-		return -ENODEV;
-
-	devm_kfree(&pdev->dev, probe_ent);
-
-	return 0;
+	return ata_host_activate(host, pdev->irq, inic_interrupt, IRQF_SHARED,
+				 &inic_sht);
 }
 
 static const struct pci_device_id inic_pci_tbl[] = {
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index a65ba63..cb9b9ac 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -253,10 +253,7 @@ enum {
 #define IS_GEN_IIE(hpriv) ((hpriv)->hp_flags & MV_HP_GEN_IIE)
 
 enum {
-	/* Our DMA boundary is determined by an ePRD being unable to handle
-	 * anything larger than 64KB
-	 */
-	MV_DMA_BOUNDARY		= 0xffffU,
+	MV_DMA_BOUNDARY		= 0xffffffffU,
 
 	EDMA_REQ_Q_BASE_LO_MASK	= 0xfffffc00U,
 
@@ -350,7 +347,6 @@ static void mv_port_stop(struct ata_port *ap);
 static void mv_qc_prep(struct ata_queued_cmd *qc);
 static void mv_qc_prep_iie(struct ata_queued_cmd *qc);
 static unsigned int mv_qc_issue(struct ata_queued_cmd *qc);
-static irqreturn_t mv_interrupt(int irq, void *dev_instance);
 static void mv_eng_timeout(struct ata_port *ap);
 static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
 
@@ -384,10 +380,10 @@ static struct scsi_host_template mv_sht = {
 	.queuecommand		= ata_scsi_queuecmd,
 	.can_queue		= MV_USE_Q_DEPTH,
 	.this_id		= ATA_SHT_THIS_ID,
-	.sg_tablesize		= MV_MAX_SG_CT / 2,
+	.sg_tablesize		= MV_MAX_SG_CT,
 	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
 	.emulated		= ATA_SHT_EMULATED,
-	.use_clustering		= ATA_SHT_USE_CLUSTERING,
+	.use_clustering		= 1,
 	.proc_name		= DRV_NAME,
 	.dma_boundary		= MV_DMA_BOUNDARY,
 	.slave_configure	= ata_scsi_slave_config,
@@ -405,6 +401,7 @@ static const struct ata_port_operations mv5_ops = {
 	.dev_select		= ata_std_dev_select,
 
 	.phy_reset		= mv_phy_reset,
+	.cable_detect		= ata_cable_sata,
 
 	.qc_prep		= mv_qc_prep,
 	.qc_issue		= mv_qc_issue,
@@ -412,7 +409,6 @@ static const struct ata_port_operations mv5_ops = {
 
 	.eng_timeout		= mv_eng_timeout,
 
-	.irq_handler		= mv_interrupt,
 	.irq_clear		= mv_irq_clear,
 	.irq_on			= ata_irq_on,
 	.irq_ack		= ata_irq_ack,
@@ -434,6 +430,7 @@ static const struct ata_port_operations mv6_ops = {
 	.dev_select		= ata_std_dev_select,
 
 	.phy_reset		= mv_phy_reset,
+	.cable_detect		= ata_cable_sata,
 
 	.qc_prep		= mv_qc_prep,
 	.qc_issue		= mv_qc_issue,
@@ -441,7 +438,6 @@ static const struct ata_port_operations mv6_ops = {
 
 	.eng_timeout		= mv_eng_timeout,
 
-	.irq_handler		= mv_interrupt,
 	.irq_clear		= mv_irq_clear,
 	.irq_on			= ata_irq_on,
 	.irq_ack		= ata_irq_ack,
@@ -463,6 +459,7 @@ static const struct ata_port_operations mv_iie_ops = {
 	.dev_select		= ata_std_dev_select,
 
 	.phy_reset		= mv_phy_reset,
+	.cable_detect		= ata_cable_sata,
 
 	.qc_prep		= mv_qc_prep_iie,
 	.qc_issue		= mv_qc_issue,
@@ -470,7 +467,6 @@ static const struct ata_port_operations mv_iie_ops = {
 
 	.eng_timeout		= mv_eng_timeout,
 
-	.irq_handler		= mv_interrupt,
 	.irq_clear		= mv_irq_clear,
 	.irq_on			= ata_irq_on,
 	.irq_ack		= ata_irq_ack,
@@ -484,35 +480,30 @@ static const struct ata_port_operations mv_iie_ops = {
 
 static const struct ata_port_info mv_port_info[] = {
 	{  /* chip_504x */
-		.sht		= &mv_sht,
 		.flags		= MV_COMMON_FLAGS,
 		.pio_mask	= 0x1f,	/* pio0-4 */
 		.udma_mask	= 0x7f,	/* udma0-6 */
 		.port_ops	= &mv5_ops,
 	},
 	{  /* chip_508x */
-		.sht		= &mv_sht,
 		.flags		= (MV_COMMON_FLAGS | MV_FLAG_DUAL_HC),
 		.pio_mask	= 0x1f,	/* pio0-4 */
 		.udma_mask	= 0x7f,	/* udma0-6 */
 		.port_ops	= &mv5_ops,
 	},
 	{  /* chip_5080 */
-		.sht		= &mv_sht,
 		.flags		= (MV_COMMON_FLAGS | MV_FLAG_DUAL_HC),
 		.pio_mask	= 0x1f,	/* pio0-4 */
 		.udma_mask	= 0x7f,	/* udma0-6 */
 		.port_ops	= &mv5_ops,
 	},
 	{  /* chip_604x */
-		.sht		= &mv_sht,
 		.flags		= (MV_COMMON_FLAGS | MV_6XXX_FLAGS),
 		.pio_mask	= 0x1f,	/* pio0-4 */
 		.udma_mask	= 0x7f,	/* udma0-6 */
 		.port_ops	= &mv6_ops,
 	},
 	{  /* chip_608x */
-		.sht		= &mv_sht,
 		.flags		= (MV_COMMON_FLAGS | MV_6XXX_FLAGS |
 				   MV_FLAG_DUAL_HC),
 		.pio_mask	= 0x1f,	/* pio0-4 */
@@ -520,14 +511,12 @@ static const struct ata_port_info mv_port_info[] = {
 		.port_ops	= &mv6_ops,
 	},
 	{  /* chip_6042 */
-		.sht		= &mv_sht,
 		.flags		= (MV_COMMON_FLAGS | MV_6XXX_FLAGS),
 		.pio_mask	= 0x1f,	/* pio0-4 */
 		.udma_mask	= 0x7f,	/* udma0-6 */
 		.port_ops	= &mv_iie_ops,
 	},
 	{  /* chip_7042 */
-		.sht		= &mv_sht,
 		.flags		= (MV_COMMON_FLAGS | MV_6XXX_FLAGS),
 		.pio_mask	= 0x1f,	/* pio0-4 */
 		.udma_mask	= 0x7f,	/* udma0-6 */
@@ -551,6 +540,9 @@ static const struct pci_device_id mv_pci_tbl[] = {
 
 	{ PCI_VDEVICE(TTI, 0x2310), chip_7042 },
 
+	/* add Marvell 7042 support */
+	{ PCI_VDEVICE(MARVELL, 0x7042), chip_7042 },
+
 	{ }			/* terminate list */
 };
 
@@ -585,6 +577,39 @@ static const struct mv_hw_ops mv6xxx_ops = {
 static int msi;	      /* Use PCI msi; either zero (off, default) or non-zero */
 
 
+/* move to PCI layer or libata core? */
+static int pci_go_64(struct pci_dev *pdev)
+{
+	int rc;
+
+	if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK)) {
+		rc = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK);
+		if (rc) {
+			rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
+			if (rc) {
+				dev_printk(KERN_ERR, &pdev->dev,
+					   "64-bit DMA enable failed\n");
+				return rc;
+			}
+		}
+	} else {
+		rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
+		if (rc) {
+			dev_printk(KERN_ERR, &pdev->dev,
+				   "32-bit DMA enable failed\n");
+			return rc;
+		}
+		rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
+		if (rc) {
+			dev_printk(KERN_ERR, &pdev->dev,
+				   "32-bit consistent DMA enable failed\n");
+			return rc;
+		}
+	}
+
+	return rc;
+}
+
 /*
  * Functions
  */
@@ -798,20 +823,18 @@ static u32 mv_scr_read(struct ata_port *ap, unsigned int sc_reg_in)
 {
 	unsigned int ofs = mv_scr_offset(sc_reg_in);
 
-	if (0xffffffffU != ofs) {
+	if (0xffffffffU != ofs)
 		return readl(mv_ap_base(ap) + ofs);
-	} else {
+	else
 		return (u32) ofs;
-	}
 }
 
 static void mv_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val)
 {
 	unsigned int ofs = mv_scr_offset(sc_reg_in);
 
-	if (0xffffffffU != ofs) {
+	if (0xffffffffU != ofs)
 		writelfl(val, mv_ap_base(ap) + ofs);
-	}
 }
 
 static void mv_edma_cfg(struct mv_host_priv *hpriv, void __iomem *port_mmio)
@@ -959,38 +982,30 @@ static void mv_port_stop(struct ata_port *ap)
  *      LOCKING:
  *      Inherited from caller.
  */
-static void mv_fill_sg(struct ata_queued_cmd *qc)
+static unsigned int mv_fill_sg(struct ata_queued_cmd *qc)
 {
 	struct mv_port_priv *pp = qc->ap->private_data;
-	unsigned int i = 0;
+	unsigned int n_sg = 0;
 	struct scatterlist *sg;
+	struct mv_sg *mv_sg;
 
+	mv_sg = pp->sg_tbl;
 	ata_for_each_sg(sg, qc) {
-		dma_addr_t addr;
-		u32 sg_len, len, offset;
-
-		addr = sg_dma_address(sg);
-		sg_len = sg_dma_len(sg);
-
-		while (sg_len) {
-			offset = addr & MV_DMA_BOUNDARY;
-			len = sg_len;
-			if ((offset + sg_len) > 0x10000)
-				len = 0x10000 - offset;
+		dma_addr_t addr = sg_dma_address(sg);
+		u32 sg_len = sg_dma_len(sg);
 
-			pp->sg_tbl[i].addr = cpu_to_le32(addr & 0xffffffff);
-			pp->sg_tbl[i].addr_hi = cpu_to_le32((addr >> 16) >> 16);
-			pp->sg_tbl[i].flags_size = cpu_to_le32(len & 0xffff);
+		mv_sg->addr = cpu_to_le32(addr & 0xffffffff);
+		mv_sg->addr_hi = cpu_to_le32((addr >> 16) >> 16);
+		mv_sg->flags_size = cpu_to_le32(sg_len & 0xffff);
 
-			sg_len -= len;
-			addr += len;
+		if (ata_sg_is_last(sg, qc))
+			mv_sg->flags_size |= cpu_to_le32(EPRD_FLAG_END_OF_TBL);
 
-			if (!sg_len && ata_sg_is_last(sg, qc))
-				pp->sg_tbl[i].flags_size |= cpu_to_le32(EPRD_FLAG_END_OF_TBL);
-
-			i++;
-		}
+		mv_sg++;
+		n_sg++;
 	}
+
+	return n_sg;
 }
 
 static inline unsigned mv_inc_q_index(unsigned index)
@@ -1320,17 +1335,15 @@ static void mv_host_intr(struct ata_host *host, u32 relevant, unsigned int hc)
 	int shift, port, port0, hard_port, handled;
 	unsigned int err_mask;
 
-	if (hc == 0) {
+	if (hc == 0)
 		port0 = 0;
-	} else {
+	else
 		port0 = MV_PORTS_PER_HC;
-	}
 
 	/* we'll need the HC success int register in most cases */
 	hc_irq_cause = readl(hc_mmio + HC_IRQ_CAUSE_OFS);
-	if (hc_irq_cause) {
+	if (hc_irq_cause)
 		writelfl(~hc_irq_cause, hc_mmio + HC_IRQ_CAUSE_OFS);
-	}
 
 	VPRINTK("ENTER, hc%u relevant=0x%08x HC IRQ cause=0x%08x\n",
 		hc,relevant,hc_irq_cause);
@@ -1425,9 +1438,8 @@ static irqreturn_t mv_interrupt(int irq, void *dev_instance)
 	/* check the cases where we either have nothing pending or have read
 	 * a bogus register value which can indicate HW removal or PCI fault
 	 */
-	if (!irq_stat || (0xffffffffU == irq_stat)) {
+	if (!irq_stat || (0xffffffffU == irq_stat))
 		return IRQ_NONE;
-	}
 
 	n_hcs = mv_get_hc_count(host->ports[0]->flags);
 	spin_lock(&host->lock);
@@ -1952,7 +1964,6 @@ comreset_retry:
 		ata_port_disable(ap);
 		return;
 	}
-	ap->cbl = ATA_CBL_SATA;
 
 	/* even after SStatus reflects that device is ready,
 	 * it seems to take a while for link to be fully
@@ -2077,9 +2088,10 @@ static void mv_port_init(struct ata_ioports *port,  void __iomem *port_mmio)
 		readl(port_mmio + EDMA_ERR_IRQ_MASK_OFS));
 }
 
-static int mv_chip_id(struct pci_dev *pdev, struct mv_host_priv *hpriv,
-		      unsigned int board_idx)
+static int mv_chip_id(struct ata_host *host, unsigned int board_idx)
 {
+	struct pci_dev *pdev = to_pci_dev(host->dev);
+	struct mv_host_priv *hpriv = host->private_data;
 	u8 rev_id;
 	u32 hp_flags = hpriv->hp_flags;
 
@@ -2177,8 +2189,8 @@ static int mv_chip_id(struct pci_dev *pdev, struct mv_host_priv *hpriv,
 
 /**
  *      mv_init_host - Perform some early initialization of the host.
- *	@pdev: host PCI device
- *      @probe_ent: early data struct representing the host
+ *	@host: ATA host to initialize
+ *      @board_idx: controller index
  *
  *      If possible, do an early global reset of the host.  Then do
  *      our port init and clear/unmask all/relevant host interrupts.
@@ -2186,24 +2198,23 @@ static int mv_chip_id(struct pci_dev *pdev, struct mv_host_priv *hpriv,
  *      LOCKING:
  *      Inherited from caller.
  */
-static int mv_init_host(struct pci_dev *pdev, struct ata_probe_ent *probe_ent,
-			unsigned int board_idx)
+static int mv_init_host(struct ata_host *host, unsigned int board_idx)
 {
 	int rc = 0, n_hc, port, hc;
-	void __iomem *mmio = probe_ent->iomap[MV_PRIMARY_BAR];
-	struct mv_host_priv *hpriv = probe_ent->private_data;
+	struct pci_dev *pdev = to_pci_dev(host->dev);
+	void __iomem *mmio = host->iomap[MV_PRIMARY_BAR];
+	struct mv_host_priv *hpriv = host->private_data;
 
 	/* global interrupt mask */
 	writel(0, mmio + HC_MAIN_IRQ_MASK_OFS);
 
-	rc = mv_chip_id(pdev, hpriv, board_idx);
+	rc = mv_chip_id(host, board_idx);
 	if (rc)
 		goto done;
 
-	n_hc = mv_get_hc_count(probe_ent->port_flags);
-	probe_ent->n_ports = MV_PORTS_PER_HC * n_hc;
+	n_hc = mv_get_hc_count(host->ports[0]->flags);
 
-	for (port = 0; port < probe_ent->n_ports; port++)
+	for (port = 0; port < host->n_ports; port++)
 		hpriv->ops->read_preamp(hpriv, port, mmio);
 
 	rc = hpriv->ops->reset_hc(hpriv, mmio, n_hc);
@@ -2214,7 +2225,7 @@ static int mv_init_host(struct pci_dev *pdev, struct ata_probe_ent *probe_ent,
 	hpriv->ops->reset_bus(pdev, mmio);
 	hpriv->ops->enable_leds(hpriv, mmio);
 
-	for (port = 0; port < probe_ent->n_ports; port++) {
+	for (port = 0; port < host->n_ports; port++) {
 		if (IS_60XX(hpriv)) {
 			void __iomem *port_mmio = mv_port_base(mmio, port);
 
@@ -2227,9 +2238,9 @@ static int mv_init_host(struct pci_dev *pdev, struct ata_probe_ent *probe_ent,
 		hpriv->ops->phy_errata(hpriv, mmio, port);
 	}
 
-	for (port = 0; port < probe_ent->n_ports; port++) {
+	for (port = 0; port < host->n_ports; port++) {
 		void __iomem *port_mmio = mv_port_base(mmio, port);
-		mv_port_init(&probe_ent->port[port], port_mmio);
+		mv_port_init(&host->ports[port]->ioaddr, port_mmio);
 	}
 
 	for (hc = 0; hc < n_hc; hc++) {
@@ -2268,17 +2279,17 @@ done:
 
 /**
  *      mv_print_info - Dump key info to kernel log for perusal.
- *      @probe_ent: early data struct representing the host
+ *      @host: ATA host to print info about
  *
  *      FIXME: complete this.
  *
  *      LOCKING:
  *      Inherited from caller.
  */
-static void mv_print_info(struct ata_probe_ent *probe_ent)
+static void mv_print_info(struct ata_host *host)
 {
-	struct pci_dev *pdev = to_pci_dev(probe_ent->dev);
-	struct mv_host_priv *hpriv = probe_ent->private_data;
+	struct pci_dev *pdev = to_pci_dev(host->dev);
+	struct mv_host_priv *hpriv = host->private_data;
 	u8 rev_id, scc;
 	const char *scc_s;
 
@@ -2297,7 +2308,7 @@ static void mv_print_info(struct ata_probe_ent *probe_ent)
 
 	dev_printk(KERN_INFO, &pdev->dev,
 	       "%u slots %u ports %s mode IRQ via %s\n",
-	       (unsigned)MV_MAX_Q_DEPTH, probe_ent->n_ports,
+	       (unsigned)MV_MAX_Q_DEPTH, host->n_ports,
 	       scc_s, (MV_HP_FLAG_MSI & hpriv->hp_flags) ? "MSI" : "INTx");
 }
 
@@ -2312,50 +2323,42 @@ static void mv_print_info(struct ata_probe_ent *probe_ent)
 static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 {
 	static int printed_version = 0;
-	struct device *dev = &pdev->dev;
-	struct ata_probe_ent *probe_ent;
-	struct mv_host_priv *hpriv;
 	unsigned int board_idx = (unsigned int)ent->driver_data;
-	int rc;
+	const struct ata_port_info *ppi[] = { &mv_port_info[board_idx], NULL };
+	struct ata_host *host;
+	struct mv_host_priv *hpriv;
+	int n_ports, rc;
 
 	if (!printed_version++)
 		dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n");
 
+	/* allocate host */
+	n_ports = mv_get_hc_count(ppi[0]->flags) * MV_PORTS_PER_HC;
+
+	host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports);
+	hpriv = devm_kzalloc(&pdev->dev, sizeof(*hpriv), GFP_KERNEL);
+	if (!host || !hpriv)
+		return -ENOMEM;
+	host->private_data = hpriv;
+
+	/* acquire resources */
 	rc = pcim_enable_device(pdev);
 	if (rc)
 		return rc;
-	pci_set_master(pdev);
 
 	rc = pcim_iomap_regions(pdev, 1 << MV_PRIMARY_BAR, DRV_NAME);
 	if (rc == -EBUSY)
 		pcim_pin_device(pdev);
 	if (rc)
 		return rc;
+	host->iomap = pcim_iomap_table(pdev);
 
-	probe_ent = devm_kzalloc(dev, sizeof(*probe_ent), GFP_KERNEL);
-	if (probe_ent == NULL)
-		return -ENOMEM;
-
-	probe_ent->dev = pci_dev_to_dev(pdev);
-	INIT_LIST_HEAD(&probe_ent->node);
-
-	hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL);
-	if (!hpriv)
-		return -ENOMEM;
-
-	probe_ent->sht = mv_port_info[board_idx].sht;
-	probe_ent->port_flags = mv_port_info[board_idx].flags;
-	probe_ent->pio_mask = mv_port_info[board_idx].pio_mask;
-	probe_ent->udma_mask = mv_port_info[board_idx].udma_mask;
-	probe_ent->port_ops = mv_port_info[board_idx].port_ops;
-
-	probe_ent->irq = pdev->irq;
-	probe_ent->irq_flags = IRQF_SHARED;
-	probe_ent->iomap = pcim_iomap_table(pdev);
-	probe_ent->private_data = hpriv;
+	rc = pci_go_64(pdev);
+	if (rc)
+		return rc;
 
 	/* initialize adapter */
-	rc = mv_init_host(pdev, probe_ent, board_idx);
+	rc = mv_init_host(host, board_idx);
 	if (rc)
 		return rc;
 
@@ -2364,13 +2367,11 @@ static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 		pci_intx(pdev, 1);
 
 	mv_dump_pci_cfg(pdev, 0x68);
-	mv_print_info(probe_ent);
+	mv_print_info(host);
 
-	if (ata_device_add(probe_ent) == 0)
-		return -ENODEV;
-
-	devm_kfree(dev, probe_ent);
-	return 0;
+	pci_set_master(pdev);
+	return ata_host_activate(host, pdev->irq, mv_interrupt, IRQF_SHARED,
+				 &mv_sht);
 }
 
 static int __init mv_init(void)
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index 9d9670a..0216974 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -260,6 +260,7 @@ static int nv_adma_port_resume(struct ata_port *ap);
 static void nv_adma_error_handler(struct ata_port *ap);
 static void nv_adma_host_stop(struct ata_host *host);
 static void nv_adma_post_internal_cmd(struct ata_queued_cmd *qc);
+static void nv_adma_tf_read(struct ata_port *ap, struct ata_taskfile *tf);
 
 enum nv_host_type
 {
@@ -368,7 +369,6 @@ static const struct ata_port_operations nv_generic_ops = {
 	.error_handler		= nv_error_handler,
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
 	.data_xfer		= ata_data_xfer,
-	.irq_handler		= nv_generic_interrupt,
 	.irq_clear		= ata_bmdma_irq_clear,
 	.irq_on			= ata_irq_on,
 	.irq_ack		= ata_irq_ack,
@@ -395,7 +395,6 @@ static const struct ata_port_operations nv_nf2_ops = {
 	.error_handler		= nv_error_handler,
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
 	.data_xfer		= ata_data_xfer,
-	.irq_handler		= nv_nf2_interrupt,
 	.irq_clear		= ata_bmdma_irq_clear,
 	.irq_on			= ata_irq_on,
 	.irq_ack		= ata_irq_ack,
@@ -422,7 +421,6 @@ static const struct ata_port_operations nv_ck804_ops = {
 	.error_handler		= nv_error_handler,
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
 	.data_xfer		= ata_data_xfer,
-	.irq_handler		= nv_ck804_interrupt,
 	.irq_clear		= ata_bmdma_irq_clear,
 	.irq_on			= ata_irq_on,
 	.irq_ack		= ata_irq_ack,
@@ -435,7 +433,7 @@ static const struct ata_port_operations nv_ck804_ops = {
 static const struct ata_port_operations nv_adma_ops = {
 	.port_disable		= ata_port_disable,
 	.tf_load		= ata_tf_load,
-	.tf_read		= ata_tf_read,
+	.tf_read		= nv_adma_tf_read,
 	.check_atapi_dma	= nv_adma_check_atapi_dma,
 	.exec_command		= ata_exec_command,
 	.check_status		= ata_check_status,
@@ -451,7 +449,6 @@ static const struct ata_port_operations nv_adma_ops = {
 	.error_handler		= nv_adma_error_handler,
 	.post_internal_cmd	= nv_adma_post_internal_cmd,
 	.data_xfer		= ata_data_xfer,
-	.irq_handler		= nv_adma_interrupt,
 	.irq_clear		= nv_adma_irq_clear,
 	.irq_on			= ata_irq_on,
 	.irq_ack		= ata_irq_ack,
@@ -476,6 +473,7 @@ static struct ata_port_info nv_port_info[] = {
 		.mwdma_mask	= NV_MWDMA_MASK,
 		.udma_mask	= NV_UDMA_MASK,
 		.port_ops	= &nv_generic_ops,
+		.irq_handler	= nv_generic_interrupt,
 	},
 	/* nforce2/3 */
 	{
@@ -486,6 +484,7 @@ static struct ata_port_info nv_port_info[] = {
 		.mwdma_mask	= NV_MWDMA_MASK,
 		.udma_mask	= NV_UDMA_MASK,
 		.port_ops	= &nv_nf2_ops,
+		.irq_handler	= nv_nf2_interrupt,
 	},
 	/* ck804 */
 	{
@@ -496,6 +495,7 @@ static struct ata_port_info nv_port_info[] = {
 		.mwdma_mask	= NV_MWDMA_MASK,
 		.udma_mask	= NV_UDMA_MASK,
 		.port_ops	= &nv_ck804_ops,
+		.irq_handler	= nv_ck804_interrupt,
 	},
 	/* ADMA */
 	{
@@ -507,6 +507,7 @@ static struct ata_port_info nv_port_info[] = {
 		.mwdma_mask	= NV_MWDMA_MASK,
 		.udma_mask	= NV_UDMA_MASK,
 		.port_ops	= &nv_adma_ops,
+		.irq_handler	= nv_adma_interrupt,
 	},
 };
 
@@ -667,6 +668,18 @@ static int nv_adma_check_atapi_dma(struct ata_queued_cmd *qc)
 	return !(pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE);
 }
 
+static void nv_adma_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
+{
+	/* Since commands where a result TF is requested are not
+	   executed in ADMA mode, the only time this function will be called
+	   in ADMA mode will be if a command fails. In this case we
+	   don't care about going into register mode with ADMA commands
+	   pending, as the commands will all shortly be aborted anyway. */
+	nv_adma_register_mode(ap);
+
+	ata_tf_read(ap, tf);
+}
+
 static unsigned int nv_adma_tf_to_cpb(struct ata_taskfile *tf, __le16 *cpb)
 {
 	unsigned int idx = 0;
@@ -738,19 +751,11 @@ static int nv_adma_check_cpb(struct ata_port *ap, int cpb_num, int force_err)
 		return 1;
 	}
 
-	if (flags & NV_CPB_RESP_DONE) {
+	if (likely(flags & NV_CPB_RESP_DONE)) {
 		struct ata_queued_cmd *qc = ata_qc_from_tag(ap, cpb_num);
 		VPRINTK("CPB flags done, flags=0x%x\n", flags);
 		if (likely(qc)) {
-			/* Grab the ATA port status for non-NCQ commands.
-			   For NCQ commands the current status may have nothing to do with
-			   the command just completed. */
-			if (qc->tf.protocol != ATA_PROT_NCQ) {
-				u8 ata_status = readb(pp->ctl_block + (ATA_REG_STATUS * 4));
-				qc->err_mask |= ac_err_mask(ata_status);
-			}
-			DPRINTK("Completing qc from tag %d with err_mask %u\n",cpb_num,
-				qc->err_mask);
+			DPRINTK("Completing qc from tag %d\n",cpb_num);
 			ata_qc_complete(qc);
 		} else {
 			struct ata_eh_info *ehi = &ap->eh_info;
@@ -1074,14 +1079,14 @@ static int nv_adma_port_resume(struct ata_port *ap)
 }
 #endif
 
-static void nv_adma_setup_port(struct ata_probe_ent *probe_ent, unsigned int port)
+static void nv_adma_setup_port(struct ata_port *ap)
 {
-	void __iomem *mmio = probe_ent->iomap[NV_MMIO_BAR];
-	struct ata_ioports *ioport = &probe_ent->port[port];
+	void __iomem *mmio = ap->host->iomap[NV_MMIO_BAR];
+	struct ata_ioports *ioport = &ap->ioaddr;
 
 	VPRINTK("ENTER\n");
 
-	mmio += NV_ADMA_PORT + port * NV_ADMA_PORT_SIZE;
+	mmio += NV_ADMA_PORT + ap->port_no * NV_ADMA_PORT_SIZE;
 
 	ioport->cmd_addr	= mmio;
 	ioport->data_addr	= mmio + (ATA_REG_DATA * 4);
@@ -1098,9 +1103,9 @@ static void nv_adma_setup_port(struct ata_probe_ent *probe_ent, unsigned int por
 	ioport->ctl_addr	= mmio + 0x20;
 }
 
-static int nv_adma_host_init(struct ata_probe_ent *probe_ent)
+static int nv_adma_host_init(struct ata_host *host)
 {
-	struct pci_dev *pdev = to_pci_dev(probe_ent->dev);
+	struct pci_dev *pdev = to_pci_dev(host->dev);
 	unsigned int i;
 	u32 tmp32;
 
@@ -1115,8 +1120,8 @@ static int nv_adma_host_init(struct ata_probe_ent *probe_ent)
 
 	pci_write_config_dword(pdev, NV_MCP_SATA_CFG_20, tmp32);
 
-	for (i = 0; i < probe_ent->n_ports; i++)
-		nv_adma_setup_port(probe_ent, i);
+	for (i = 0; i < host->n_ports; i++)
+		nv_adma_setup_port(host->ports[i]);
 
 	return 0;
 }
@@ -1167,9 +1172,11 @@ static int nv_adma_use_reg_mode(struct ata_queued_cmd *qc)
 	struct nv_adma_port_priv *pp = qc->ap->private_data;
 
 	/* ADMA engine can only be used for non-ATAPI DMA commands,
-	   or interrupt-driven no-data commands. */
+	   or interrupt-driven no-data commands, where a result taskfile
+	   is not required. */
 	if((pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE) ||
-	   (qc->tf.flags & ATA_TFLAG_POLLING))
+	   (qc->tf.flags & ATA_TFLAG_POLLING) ||
+	   (qc->flags & ATA_QCFLAG_RESULT_TF))
 		return 1;
 
 	if((qc->flags & ATA_QCFLAG_DMAMAP) ||
@@ -1473,14 +1480,13 @@ static void nv_adma_error_handler(struct ata_port *ap)
 static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 {
 	static int printed_version = 0;
-	struct ata_port_info *ppi[2];
-	struct ata_probe_ent *probe_ent;
+	const struct ata_port_info *ppi[2];
+	struct ata_host *host;
 	struct nv_host_priv *hpriv;
 	int rc;
 	u32 bar;
 	void __iomem *base;
 	unsigned long type = ent->driver_data;
-	int mask_set = 0;
 
         // Make sure this is a SATA controller by counting the number of bars
         // (NVIDIA SATA controllers will always have six bars).  Otherwise,
@@ -1496,50 +1502,38 @@ static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (rc)
 		return rc;
 
-	rc = pci_request_regions(pdev, DRV_NAME);
-	if (rc) {
-		pcim_pin_device(pdev);
-		return rc;
-	}
-
-	if(type >= CK804 && adma_enabled) {
+	/* determine type and allocate host */
+	if (type >= CK804 && adma_enabled) {
 		dev_printk(KERN_NOTICE, &pdev->dev, "Using ADMA mode\n");
 		type = ADMA;
-		if(!pci_set_dma_mask(pdev, DMA_64BIT_MASK) &&
-		   !pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK))
-			mask_set = 1;
-	}
-
-	if(!mask_set) {
-		rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
-		if (rc)
-			return rc;
-		rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
-		if (rc)
-			return rc;
 	}
 
-	rc = -ENOMEM;
+	ppi[0] = ppi[1] = &nv_port_info[type];
+	rc = ata_pci_prepare_native_host(pdev, ppi, 2, &host);
+	if (rc)
+		return rc;
 
 	hpriv = devm_kzalloc(&pdev->dev, sizeof(*hpriv), GFP_KERNEL);
 	if (!hpriv)
 		return -ENOMEM;
+	hpriv->type = type;
+	host->private_data = hpriv;
 
-	ppi[0] = ppi[1] = &nv_port_info[type];
-	probe_ent = ata_pci_init_native_mode(pdev, ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY);
-	if (!probe_ent)
-		return -ENOMEM;
-
-	if (!pcim_iomap(pdev, NV_MMIO_BAR, 0))
-		return -EIO;
-	probe_ent->iomap = pcim_iomap_table(pdev);
+	/* set 64bit dma masks, may fail */
+	if (type == ADMA) {
+		if (pci_set_dma_mask(pdev, DMA_64BIT_MASK) == 0)
+			pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK);
+	}
 
-	probe_ent->private_data = hpriv;
-	hpriv->type = type;
+	/* request and iomap NV_MMIO_BAR */
+	rc = pcim_iomap_regions(pdev, 1 << NV_MMIO_BAR, DRV_NAME);
+	if (rc)
+		return rc;
 
-	base = probe_ent->iomap[NV_MMIO_BAR];
-	probe_ent->port[0].scr_addr = base + NV_PORT0_SCR_REG_OFFSET;
-	probe_ent->port[1].scr_addr = base + NV_PORT1_SCR_REG_OFFSET;
+	/* configure SCR access */
+	base = host->iomap[NV_MMIO_BAR];
+	host->ports[0]->ioaddr.scr_addr = base + NV_PORT0_SCR_REG_OFFSET;
+	host->ports[1]->ioaddr.scr_addr = base + NV_PORT1_SCR_REG_OFFSET;
 
 	/* enable SATA space for CK804 */
 	if (type >= CK804) {
@@ -1550,20 +1544,16 @@ static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 		pci_write_config_byte(pdev, NV_MCP_SATA_CFG_20, regval);
 	}
 
-	pci_set_master(pdev);
-
+	/* init ADMA */
 	if (type == ADMA) {
-		rc = nv_adma_host_init(probe_ent);
+		rc = nv_adma_host_init(host);
 		if (rc)
 			return rc;
 	}
 
-	rc = ata_device_add(probe_ent);
-	if (rc != NV_PORTS)
-		return -ENODEV;
-
-	devm_kfree(&pdev->dev, probe_ent);
-	return 0;
+	pci_set_master(pdev);
+	return ata_host_activate(host, pdev->irq, ppi[0]->irq_handler,
+				 IRQF_SHARED, ppi[0]->sht);
 }
 
 static void nv_remove_one (struct pci_dev *pdev)
diff --git a/drivers/ata/sata_promise.c b/drivers/ata/sata_promise.c
index 2339813..f56549b 100644
--- a/drivers/ata/sata_promise.c
+++ b/drivers/ata/sata_promise.c
@@ -45,10 +45,11 @@
 #include "sata_promise.h"
 
 #define DRV_NAME	"sata_promise"
-#define DRV_VERSION	"2.00"
+#define DRV_VERSION	"2.05"
 
 
 enum {
+	PDC_MAX_PORTS		= 4,
 	PDC_MMIO_BAR		= 3,
 
 	/* register offsets */
@@ -70,14 +71,31 @@ enum {
 	PDC_TBG_MODE		= 0x41C, /* TBG mode (not SATAII) */
 	PDC_SLEW_CTL		= 0x470, /* slew rate control reg (not SATAII) */
 
-	PDC_ERR_MASK		= (1<<19) | (1<<20) | (1<<21) | (1<<22) |
-				  (1<<8) | (1<<9) | (1<<10),
+	/* PDC_GLOBAL_CTL bit definitions */
+	PDC_PH_ERR		= (1 <<  8), /* PCI error while loading packet */
+	PDC_SH_ERR		= (1 <<  9), /* PCI error while loading S/G table */
+	PDC_DH_ERR		= (1 << 10), /* PCI error while loading data */
+	PDC2_HTO_ERR		= (1 << 12), /* host bus timeout */
+	PDC2_ATA_HBA_ERR	= (1 << 13), /* error during SATA DATA FIS transmission */
+	PDC2_ATA_DMA_CNT_ERR	= (1 << 14), /* DMA DATA FIS size differs from S/G count */
+	PDC_OVERRUN_ERR		= (1 << 19), /* S/G byte count larger than HD requires */
+	PDC_UNDERRUN_ERR	= (1 << 20), /* S/G byte count less than HD requires */
+	PDC_DRIVE_ERR		= (1 << 21), /* drive error */
+	PDC_PCI_SYS_ERR		= (1 << 22), /* PCI system error */
+	PDC1_PCI_PARITY_ERR	= (1 << 23), /* PCI parity error (from SATA150 driver) */
+	PDC1_ERR_MASK		= PDC1_PCI_PARITY_ERR,
+	PDC2_ERR_MASK		= PDC2_HTO_ERR | PDC2_ATA_HBA_ERR | PDC2_ATA_DMA_CNT_ERR,
+	PDC_ERR_MASK		= (PDC_PH_ERR | PDC_SH_ERR | PDC_DH_ERR | PDC_OVERRUN_ERR
+				   | PDC_UNDERRUN_ERR | PDC_DRIVE_ERR | PDC_PCI_SYS_ERR
+				   | PDC1_ERR_MASK | PDC2_ERR_MASK),
 
 	board_2037x		= 0,	/* FastTrak S150 TX2plus */
-	board_20319		= 1,	/* FastTrak S150 TX4 */
-	board_20619		= 2,	/* FastTrak TX4000 */
-	board_2057x		= 3,	/* SATAII150 Tx2plus */
-	board_40518		= 4,	/* SATAII150 Tx4 */
+	board_2037x_pata	= 1,	/* FastTrak S150 TX2plus PATA port */
+	board_20319		= 2,	/* FastTrak S150 TX4 */
+	board_20619		= 3,	/* FastTrak TX4000 */
+	board_2057x		= 4,	/* SATAII150 Tx2plus */
+	board_2057x_pata	= 5,	/* SATAII150 Tx2plus */
+	board_40518		= 6,	/* SATAII150 Tx4 */
 
 	PDC_HAS_PATA		= (1 << 1), /* PDC20375/20575 has PATA */
 
@@ -100,8 +118,10 @@ enum {
 				  ATA_FLAG_MMIO |
 				  ATA_FLAG_PIO_POLLING,
 
-	/* hp->flags bits */
-	PDC_FLAG_GEN_II		= (1 << 0),
+	/* ap->flags bits */
+	PDC_FLAG_GEN_II		= (1 << 24),
+	PDC_FLAG_SATA_PATA	= (1 << 25), /* supports SATA + PATA */
+	PDC_FLAG_4_PORTS	= (1 << 26), /* 4 ports */
 };
 
 
@@ -110,28 +130,25 @@ struct pdc_port_priv {
 	dma_addr_t		pkt_dma;
 };
 
-struct pdc_host_priv {
-	unsigned long		flags;
-	unsigned long		port_flags[ATA_MAX_PORTS];
-};
-
 static u32 pdc_sata_scr_read (struct ata_port *ap, unsigned int sc_reg);
 static void pdc_sata_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val);
 static int pdc_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *ent);
-static irqreturn_t pdc_interrupt (int irq, void *dev_instance);
-static int pdc_port_start(struct ata_port *ap);
+static int pdc_common_port_start(struct ata_port *ap);
+static int pdc_sata_port_start(struct ata_port *ap);
 static void pdc_qc_prep(struct ata_queued_cmd *qc);
 static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf);
 static void pdc_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf);
 static int pdc_check_atapi_dma(struct ata_queued_cmd *qc);
-static int pdc_old_check_atapi_dma(struct ata_queued_cmd *qc);
+static int pdc_old_sata_check_atapi_dma(struct ata_queued_cmd *qc);
 static void pdc_irq_clear(struct ata_port *ap);
 static unsigned int pdc_qc_issue_prot(struct ata_queued_cmd *qc);
 static void pdc_freeze(struct ata_port *ap);
 static void pdc_thaw(struct ata_port *ap);
-static void pdc_error_handler(struct ata_port *ap);
+static void pdc_pata_error_handler(struct ata_port *ap);
+static void pdc_sata_error_handler(struct ata_port *ap);
 static void pdc_post_internal_cmd(struct ata_queued_cmd *qc);
-
+static int pdc_pata_cable_detect(struct ata_port *ap);
+static int pdc_sata_cable_detect(struct ata_port *ap);
 
 static struct scsi_host_template pdc_ata_sht = {
 	.module			= THIS_MODULE,
@@ -164,17 +181,17 @@ static const struct ata_port_operations pdc_sata_ops = {
 	.qc_issue		= pdc_qc_issue_prot,
 	.freeze			= pdc_freeze,
 	.thaw			= pdc_thaw,
-	.error_handler		= pdc_error_handler,
+	.error_handler		= pdc_sata_error_handler,
 	.post_internal_cmd	= pdc_post_internal_cmd,
+	.cable_detect		= pdc_sata_cable_detect,
 	.data_xfer		= ata_data_xfer,
-	.irq_handler		= pdc_interrupt,
 	.irq_clear		= pdc_irq_clear,
 	.irq_on			= ata_irq_on,
 	.irq_ack		= ata_irq_ack,
 
 	.scr_read		= pdc_sata_scr_read,
 	.scr_write		= pdc_sata_scr_write,
-	.port_start		= pdc_port_start,
+	.port_start		= pdc_sata_port_start,
 };
 
 /* First-generation chips need a more restrictive ->check_atapi_dma op */
@@ -185,23 +202,23 @@ static const struct ata_port_operations pdc_old_sata_ops = {
 	.check_status		= ata_check_status,
 	.exec_command		= pdc_exec_command_mmio,
 	.dev_select		= ata_std_dev_select,
-	.check_atapi_dma	= pdc_old_check_atapi_dma,
+	.check_atapi_dma	= pdc_old_sata_check_atapi_dma,
 
 	.qc_prep		= pdc_qc_prep,
 	.qc_issue		= pdc_qc_issue_prot,
 	.freeze			= pdc_freeze,
 	.thaw			= pdc_thaw,
-	.error_handler		= pdc_error_handler,
+	.error_handler		= pdc_sata_error_handler,
 	.post_internal_cmd	= pdc_post_internal_cmd,
+	.cable_detect		= pdc_sata_cable_detect,
 	.data_xfer		= ata_data_xfer,
-	.irq_handler		= pdc_interrupt,
 	.irq_clear		= pdc_irq_clear,
 	.irq_on			= ata_irq_on,
 	.irq_ack		= ata_irq_ack,
 
 	.scr_read		= pdc_sata_scr_read,
 	.scr_write		= pdc_sata_scr_write,
-	.port_start		= pdc_port_start,
+	.port_start		= pdc_sata_port_start,
 };
 
 static const struct ata_port_operations pdc_pata_ops = {
@@ -217,32 +234,41 @@ static const struct ata_port_operations pdc_pata_ops = {
 	.qc_issue		= pdc_qc_issue_prot,
 	.freeze			= pdc_freeze,
 	.thaw			= pdc_thaw,
-	.error_handler		= pdc_error_handler,
+	.error_handler		= pdc_pata_error_handler,
 	.post_internal_cmd	= pdc_post_internal_cmd,
+	.cable_detect		= pdc_pata_cable_detect,
 	.data_xfer		= ata_data_xfer,
-	.irq_handler		= pdc_interrupt,
 	.irq_clear		= pdc_irq_clear,
 	.irq_on			= ata_irq_on,
 	.irq_ack		= ata_irq_ack,
 
-	.port_start		= pdc_port_start,
+	.port_start		= pdc_common_port_start,
 };
 
 static const struct ata_port_info pdc_port_info[] = {
 	/* board_2037x */
 	{
-		.sht		= &pdc_ata_sht,
-		.flags		= PDC_COMMON_FLAGS,
+		.flags		= PDC_COMMON_FLAGS | ATA_FLAG_SATA |
+				  PDC_FLAG_SATA_PATA,
 		.pio_mask	= 0x1f, /* pio0-4 */
 		.mwdma_mask	= 0x07, /* mwdma0-2 */
 		.udma_mask	= 0x7f, /* udma0-6 ; FIXME */
 		.port_ops	= &pdc_old_sata_ops,
 	},
 
+	/* board_2037x_pata */
+	{
+		.flags		= PDC_COMMON_FLAGS | ATA_FLAG_SLAVE_POSS,
+		.pio_mask	= 0x1f, /* pio0-4 */
+		.mwdma_mask	= 0x07, /* mwdma0-2 */
+		.udma_mask	= 0x7f, /* udma0-6 ; FIXME */
+		.port_ops	= &pdc_pata_ops,
+	},
+
 	/* board_20319 */
 	{
-		.sht		= &pdc_ata_sht,
-		.flags		= PDC_COMMON_FLAGS | ATA_FLAG_SATA,
+		.flags		= PDC_COMMON_FLAGS | ATA_FLAG_SATA |
+				  PDC_FLAG_4_PORTS,
 		.pio_mask	= 0x1f, /* pio0-4 */
 		.mwdma_mask	= 0x07, /* mwdma0-2 */
 		.udma_mask	= 0x7f, /* udma0-6 ; FIXME */
@@ -251,8 +277,8 @@ static const struct ata_port_info pdc_port_info[] = {
 
 	/* board_20619 */
 	{
-		.sht		= &pdc_ata_sht,
-		.flags		= PDC_COMMON_FLAGS | ATA_FLAG_SLAVE_POSS,
+		.flags		= PDC_COMMON_FLAGS | ATA_FLAG_SLAVE_POSS |
+				  PDC_FLAG_4_PORTS,
 		.pio_mask	= 0x1f, /* pio0-4 */
 		.mwdma_mask	= 0x07, /* mwdma0-2 */
 		.udma_mask	= 0x7f, /* udma0-6 ; FIXME */
@@ -261,18 +287,28 @@ static const struct ata_port_info pdc_port_info[] = {
 
 	/* board_2057x */
 	{
-		.sht		= &pdc_ata_sht,
-		.flags		= PDC_COMMON_FLAGS,
+		.flags		= PDC_COMMON_FLAGS | ATA_FLAG_SATA |
+				  PDC_FLAG_GEN_II | PDC_FLAG_SATA_PATA,
 		.pio_mask	= 0x1f, /* pio0-4 */
 		.mwdma_mask	= 0x07, /* mwdma0-2 */
 		.udma_mask	= 0x7f, /* udma0-6 ; FIXME */
 		.port_ops	= &pdc_sata_ops,
 	},
 
+	/* board_2057x_pata */
+	{
+		.flags		= PDC_COMMON_FLAGS | ATA_FLAG_SLAVE_POSS,
+				  PDC_FLAG_GEN_II,
+		.pio_mask	= 0x1f, /* pio0-4 */
+		.mwdma_mask	= 0x07, /* mwdma0-2 */
+		.udma_mask	= 0x7f, /* udma0-6 ; FIXME */
+		.port_ops	= &pdc_pata_ops,
+	},
+
 	/* board_40518 */
 	{
-		.sht		= &pdc_ata_sht,
-		.flags		= PDC_COMMON_FLAGS | ATA_FLAG_SATA,
+		.flags		= PDC_COMMON_FLAGS | ATA_FLAG_SATA |
+				  PDC_FLAG_GEN_II | PDC_FLAG_4_PORTS,
 		.pio_mask	= 0x1f, /* pio0-4 */
 		.mwdma_mask	= 0x07, /* mwdma0-2 */
 		.udma_mask	= 0x7f, /* udma0-6 ; FIXME */
@@ -313,18 +349,12 @@ static struct pci_driver pdc_ata_pci_driver = {
 };
 
 
-static int pdc_port_start(struct ata_port *ap)
+static int pdc_common_port_start(struct ata_port *ap)
 {
 	struct device *dev = ap->host->dev;
-	struct pdc_host_priv *hp = ap->host->private_data;
 	struct pdc_port_priv *pp;
 	int rc;
 
-	/* fix up port flags and cable type for SATA+PATA chips */
-	ap->flags |= hp->port_flags[ap->port_no];
-	if (ap->flags & ATA_FLAG_SATA)
-		ap->cbl = ATA_CBL_SATA;
-
 	rc = ata_port_start(ap);
 	if (rc)
 		return rc;
@@ -339,8 +369,19 @@ static int pdc_port_start(struct ata_port *ap)
 
 	ap->private_data = pp;
 
+	return 0;
+}
+
+static int pdc_sata_port_start(struct ata_port *ap)
+{
+	int rc;
+
+	rc = pdc_common_port_start(ap);
+	if (rc)
+		return rc;
+
 	/* fix up PHYMODE4 align timing */
-	if ((hp->flags & PDC_FLAG_GEN_II) && sata_scr_valid(ap)) {
+	if (ap->flags & PDC_FLAG_GEN_II) {
 		void __iomem *mmio = (void __iomem *) ap->ioaddr.scr_addr;
 		unsigned int tmp;
 
@@ -374,23 +415,25 @@ static void pdc_reset_port(struct ata_port *ap)
 	readl(mmio);	/* flush */
 }
 
-static void pdc_pata_cbl_detect(struct ata_port *ap)
+static int pdc_pata_cable_detect(struct ata_port *ap)
 {
 	u8 tmp;
 	void __iomem *mmio = (void __iomem *) ap->ioaddr.cmd_addr + PDC_CTLSTAT + 0x03;
 
 	tmp = readb(mmio);
+	if (tmp & 0x01)
+		return ATA_CBL_PATA40;
+	return ATA_CBL_PATA80;
+}
 
-	if (tmp & 0x01) {
-		ap->cbl = ATA_CBL_PATA40;
-		ap->udma_mask &= ATA_UDMA_MASK_40C;
-	} else
-		ap->cbl = ATA_CBL_PATA80;
+static int pdc_sata_cable_detect(struct ata_port *ap)
+{
+	return ATA_CBL_SATA;
 }
 
 static u32 pdc_sata_scr_read (struct ata_port *ap, unsigned int sc_reg)
 {
-	if (sc_reg > SCR_CONTROL || ap->cbl != ATA_CBL_SATA)
+	if (sc_reg > SCR_CONTROL)
 		return 0xffffffffU;
 	return readl(ap->ioaddr.scr_addr + (sc_reg * 4));
 }
@@ -399,7 +442,7 @@ static u32 pdc_sata_scr_read (struct ata_port *ap, unsigned int sc_reg)
 static void pdc_sata_scr_write (struct ata_port *ap, unsigned int sc_reg,
 			       u32 val)
 {
-	if (sc_reg > SCR_CONTROL || ap->cbl != ATA_CBL_SATA)
+	if (sc_reg > SCR_CONTROL)
 		return;
 	writel(val, ap->ioaddr.scr_addr + (sc_reg * 4));
 }
@@ -555,52 +598,79 @@ static void pdc_thaw(struct ata_port *ap)
 	readl(mmio + PDC_CTLSTAT); /* flush */
 }
 
-static int pdc_pre_reset(struct ata_port *ap)
-{
-	if (!sata_scr_valid(ap))
-		pdc_pata_cbl_detect(ap);
-	return ata_std_prereset(ap);
-}
-
-static void pdc_error_handler(struct ata_port *ap)
+static void pdc_common_error_handler(struct ata_port *ap, ata_reset_fn_t hardreset)
 {
-	ata_reset_fn_t hardreset;
-
 	if (!(ap->pflags & ATA_PFLAG_FROZEN))
 		pdc_reset_port(ap);
 
-	hardreset = NULL;
-	if (sata_scr_valid(ap))
-		hardreset = sata_std_hardreset;
-
 	/* perform recovery */
-	ata_do_eh(ap, pdc_pre_reset, ata_std_softreset, hardreset,
+	ata_do_eh(ap, ata_std_prereset, ata_std_softreset, hardreset,
 		  ata_std_postreset);
 }
 
+static void pdc_pata_error_handler(struct ata_port *ap)
+{
+	pdc_common_error_handler(ap, NULL);
+}
+
+static void pdc_sata_error_handler(struct ata_port *ap)
+{
+	pdc_common_error_handler(ap, sata_std_hardreset);
+}
+
 static void pdc_post_internal_cmd(struct ata_queued_cmd *qc)
 {
 	struct ata_port *ap = qc->ap;
 
-	if (qc->flags & ATA_QCFLAG_FAILED)
-		qc->err_mask |= AC_ERR_OTHER;
-
 	/* make DMA engine forget about the failed command */
-	if (qc->err_mask)
+	if (qc->flags & ATA_QCFLAG_FAILED)
 		pdc_reset_port(ap);
 }
 
+static void pdc_error_intr(struct ata_port *ap, struct ata_queued_cmd *qc,
+			   u32 port_status, u32 err_mask)
+{
+	struct ata_eh_info *ehi = &ap->eh_info;
+	unsigned int ac_err_mask = 0;
+
+	ata_ehi_clear_desc(ehi);
+	ata_ehi_push_desc(ehi, "port_status 0x%08x", port_status);
+	port_status &= err_mask;
+
+	if (port_status & PDC_DRIVE_ERR)
+		ac_err_mask |= AC_ERR_DEV;
+	if (port_status & (PDC_OVERRUN_ERR | PDC_UNDERRUN_ERR))
+		ac_err_mask |= AC_ERR_HSM;
+	if (port_status & (PDC2_ATA_HBA_ERR | PDC2_ATA_DMA_CNT_ERR))
+		ac_err_mask |= AC_ERR_ATA_BUS;
+	if (port_status & (PDC_PH_ERR | PDC_SH_ERR | PDC_DH_ERR | PDC2_HTO_ERR
+			   | PDC_PCI_SYS_ERR | PDC1_PCI_PARITY_ERR))
+		ac_err_mask |= AC_ERR_HOST_BUS;
+
+	if (sata_scr_valid(ap))
+		ehi->serror |= pdc_sata_scr_read(ap, SCR_ERROR);
+
+	qc->err_mask |= ac_err_mask;
+
+	pdc_reset_port(ap);
+}
+
 static inline unsigned int pdc_host_intr( struct ata_port *ap,
                                           struct ata_queued_cmd *qc)
 {
 	unsigned int handled = 0;
-	u32 tmp;
-	void __iomem *mmio = ap->ioaddr.cmd_addr + PDC_GLOBAL_CTL;
+	void __iomem *port_mmio = ap->ioaddr.cmd_addr;
+	u32 port_status, err_mask;
 
-	tmp = readl(mmio);
-	if (tmp & PDC_ERR_MASK) {
-		qc->err_mask |= AC_ERR_DEV;
-		pdc_reset_port(ap);
+	err_mask = PDC_ERR_MASK;
+	if (ap->flags & PDC_FLAG_GEN_II)
+		err_mask &= ~PDC1_ERR_MASK;
+	else
+		err_mask &= ~PDC2_ERR_MASK;
+	port_status = readl(port_mmio + PDC_GLOBAL_CTL);
+	if (unlikely(port_status & err_mask)) {
+		pdc_error_intr(ap, qc, port_status, err_mask);
+		return 1;
 	}
 
 	switch (qc->tf.protocol) {
@@ -767,44 +837,40 @@ static int pdc_check_atapi_dma(struct ata_queued_cmd *qc)
 	return pio;
 }
 
-static int pdc_old_check_atapi_dma(struct ata_queued_cmd *qc)
+static int pdc_old_sata_check_atapi_dma(struct ata_queued_cmd *qc)
 {
-	struct ata_port *ap = qc->ap;
-
 	/* First generation chips cannot use ATAPI DMA on SATA ports */
-	if (sata_scr_valid(ap))
-		return 1;
-	return pdc_check_atapi_dma(qc);
+	return 1;
 }
 
-static void pdc_ata_setup_port(struct ata_ioports *port, void __iomem *base,
-			       void __iomem *scr_addr)
+static void pdc_ata_setup_port(struct ata_port *ap,
+			       void __iomem *base, void __iomem *scr_addr)
 {
-	port->cmd_addr		= base;
-	port->data_addr		= base;
-	port->feature_addr	=
-	port->error_addr	= base + 0x4;
-	port->nsect_addr	= base + 0x8;
-	port->lbal_addr		= base + 0xc;
-	port->lbam_addr		= base + 0x10;
-	port->lbah_addr		= base + 0x14;
-	port->device_addr	= base + 0x18;
-	port->command_addr	=
-	port->status_addr	= base + 0x1c;
-	port->altstatus_addr	=
-	port->ctl_addr		= base + 0x38;
-	port->scr_addr		= scr_addr;
+	ap->ioaddr.cmd_addr		= base;
+	ap->ioaddr.data_addr		= base;
+	ap->ioaddr.feature_addr		=
+	ap->ioaddr.error_addr		= base + 0x4;
+	ap->ioaddr.nsect_addr		= base + 0x8;
+	ap->ioaddr.lbal_addr		= base + 0xc;
+	ap->ioaddr.lbam_addr		= base + 0x10;
+	ap->ioaddr.lbah_addr		= base + 0x14;
+	ap->ioaddr.device_addr		= base + 0x18;
+	ap->ioaddr.command_addr		=
+	ap->ioaddr.status_addr		= base + 0x1c;
+	ap->ioaddr.altstatus_addr	=
+	ap->ioaddr.ctl_addr		= base + 0x38;
+	ap->ioaddr.scr_addr		= scr_addr;
 }
 
 
-static void pdc_host_init(unsigned int chip_id, struct ata_probe_ent *pe)
+static void pdc_host_init(struct ata_host *host)
 {
-	void __iomem *mmio = pe->iomap[PDC_MMIO_BAR];
-	struct pdc_host_priv *hp = pe->private_data;
+	void __iomem *mmio = host->iomap[PDC_MMIO_BAR];
+	int is_gen2 = host->ports[0]->flags & PDC_FLAG_GEN_II;
 	int hotplug_offset;
 	u32 tmp;
 
-	if (hp->flags & PDC_FLAG_GEN_II)
+	if (is_gen2)
 		hotplug_offset = PDC2_SATA_PLUG_CSR;
 	else
 		hotplug_offset = PDC_SATA_PLUG_CSR;
@@ -818,7 +884,7 @@ static void pdc_host_init(unsigned int chip_id, struct ata_probe_ent *pe)
 	/* enable BMR_BURST, maybe change FIFO_SHD to 8 dwords */
 	tmp = readl(mmio + PDC_FLASH_CTL);
 	tmp |= 0x02000;	/* bit 13 (enable bmr burst) */
-	if (!(hp->flags & PDC_FLAG_GEN_II))
+	if (!is_gen2)
 		tmp |= 0x10000;	/* bit 16 (fifo threshold at 8 dw) */
 	writel(tmp, mmio + PDC_FLASH_CTL);
 
@@ -831,7 +897,7 @@ static void pdc_host_init(unsigned int chip_id, struct ata_probe_ent *pe)
 	writel(tmp | 0xff0000, mmio + hotplug_offset);
 
 	/* don't initialise TBG or SLEW on 2nd generation chips */
-	if (hp->flags & PDC_FLAG_GEN_II)
+	if (is_gen2)
 		return;
 
 	/* reduce TBG clock to 133 Mhz. */
@@ -853,16 +919,16 @@ static void pdc_host_init(unsigned int chip_id, struct ata_probe_ent *pe)
 static int pdc_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 {
 	static int printed_version;
-	struct ata_probe_ent *probe_ent;
-	struct pdc_host_priv *hp;
+	const struct ata_port_info *pi = &pdc_port_info[ent->driver_data];
+	const struct ata_port_info *ppi[PDC_MAX_PORTS];
+	struct ata_host *host;
 	void __iomem *base;
-	unsigned int board_idx = (unsigned int) ent->driver_data;
-	int rc;
-	u8 tmp;
+	int n_ports, i, rc;
 
 	if (!printed_version++)
 		dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
 
+	/* enable and acquire resources */
 	rc = pcim_enable_device(pdev);
 	if (rc)
 		return rc;
@@ -872,89 +938,49 @@ static int pdc_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *e
 		pcim_pin_device(pdev);
 	if (rc)
 		return rc;
+	base = pcim_iomap_table(pdev)[PDC_MMIO_BAR];
 
-	rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
-	if (rc)
-		return rc;
-	rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
-	if (rc)
-		return rc;
-
-	probe_ent = devm_kzalloc(&pdev->dev, sizeof(*probe_ent), GFP_KERNEL);
-	if (probe_ent == NULL)
-		return -ENOMEM;
+	/* determine port configuration and setup host */
+	n_ports = 2;
+	if (pi->flags & PDC_FLAG_4_PORTS)
+		n_ports = 4;
+	for (i = 0; i < n_ports; i++)
+		ppi[i] = pi;
 
-	probe_ent->dev = pci_dev_to_dev(pdev);
-	INIT_LIST_HEAD(&probe_ent->node);
+	if (pi->flags & PDC_FLAG_SATA_PATA) {
+		u8 tmp = readb(base + PDC_FLASH_CTL+1);
+		if (!(tmp & 0x80)) {
+			ppi[n_ports++] = pi + 1;
+			dev_printk(KERN_INFO, &pdev->dev, "PATA port found\n");
+		}
+	}
 
-	hp = devm_kzalloc(&pdev->dev, sizeof(*hp), GFP_KERNEL);
-	if (hp == NULL)
+	host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports);
+	if (!host) {
+		dev_printk(KERN_ERR, &pdev->dev, "failed to allocate host\n");
 		return -ENOMEM;
-
-	probe_ent->private_data = hp;
-
-	probe_ent->sht		= pdc_port_info[board_idx].sht;
-	probe_ent->port_flags	= pdc_port_info[board_idx].flags;
-	probe_ent->pio_mask	= pdc_port_info[board_idx].pio_mask;
-	probe_ent->mwdma_mask	= pdc_port_info[board_idx].mwdma_mask;
-	probe_ent->udma_mask	= pdc_port_info[board_idx].udma_mask;
-	probe_ent->port_ops	= pdc_port_info[board_idx].port_ops;
-
-       	probe_ent->irq = pdev->irq;
-       	probe_ent->irq_flags = IRQF_SHARED;
-	probe_ent->iomap = pcim_iomap_table(pdev);
-
-	base = probe_ent->iomap[PDC_MMIO_BAR];
-
-	pdc_ata_setup_port(&probe_ent->port[0], base + 0x200, base + 0x400);
-	pdc_ata_setup_port(&probe_ent->port[1], base + 0x280, base + 0x500);
-
-	/* notice 4-port boards */
-	switch (board_idx) {
-	case board_40518:
-		hp->flags |= PDC_FLAG_GEN_II;
-		/* Fall through */
-	case board_20319:
-       		probe_ent->n_ports = 4;
-		pdc_ata_setup_port(&probe_ent->port[2], base + 0x300, base + 0x600);
-		pdc_ata_setup_port(&probe_ent->port[3], base + 0x380, base + 0x700);
-		break;
-	case board_2057x:
-		hp->flags |= PDC_FLAG_GEN_II;
-		/* Fall through */
-	case board_2037x:
-		/* TX2plus boards also have a PATA port */
-		tmp = readb(base + PDC_FLASH_CTL+1);
-		if (!(tmp & 0x80)) {
-			probe_ent->n_ports = 3;
-			pdc_ata_setup_port(&probe_ent->port[2], base + 0x300, NULL);
-			hp->port_flags[2] = ATA_FLAG_SLAVE_POSS;
-			printk(KERN_INFO DRV_NAME " PATA port found\n");
-		} else
-			probe_ent->n_ports = 2;
-		hp->port_flags[0] = ATA_FLAG_SATA;
-		hp->port_flags[1] = ATA_FLAG_SATA;
-		break;
-	case board_20619:
-		probe_ent->n_ports = 4;
-		pdc_ata_setup_port(&probe_ent->port[2], base + 0x300, NULL);
-		pdc_ata_setup_port(&probe_ent->port[3], base + 0x380, NULL);
-		break;
-	default:
-		BUG();
-		break;
 	}
+	host->iomap = pcim_iomap_table(pdev);
 
-	pci_set_master(pdev);
+	for (i = 0; i < host->n_ports; i++)
+		pdc_ata_setup_port(host->ports[i],
+				   base + 0x200 + i * 0x80,
+				   base + 0x400 + i * 0x100);
 
 	/* initialize adapter */
-	pdc_host_init(board_idx, probe_ent);
+	pdc_host_init(host);
 
-	if (!ata_device_add(probe_ent))
-		return -ENODEV;
+	rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
+	if (rc)
+		return rc;
+	rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
+	if (rc)
+		return rc;
 
-	devm_kfree(&pdev->dev, probe_ent);
-	return 0;
+	/* start host, request IRQ and attach */
+	pci_set_master(pdev);
+	return ata_host_activate(host, pdev->irq, pdc_interrupt, IRQF_SHARED,
+				 &pdc_ata_sht);
 }
 
 
diff --git a/drivers/ata/sata_qstor.c b/drivers/ata/sata_qstor.c
index 8786b45..f5a05de 100644
--- a/drivers/ata/sata_qstor.c
+++ b/drivers/ata/sata_qstor.c
@@ -114,7 +114,6 @@ struct qs_port_priv {
 static u32 qs_scr_read (struct ata_port *ap, unsigned int sc_reg);
 static void qs_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val);
 static int qs_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *ent);
-static irqreturn_t qs_intr (int irq, void *dev_instance);
 static int qs_port_start(struct ata_port *ap);
 static void qs_host_stop(struct ata_host *host);
 static void qs_phy_reset(struct ata_port *ap);
@@ -158,7 +157,6 @@ static const struct ata_port_operations qs_ata_ops = {
 	.qc_issue		= qs_qc_issue,
 	.data_xfer		= ata_data_xfer,
 	.eng_timeout		= qs_eng_timeout,
-	.irq_handler		= qs_intr,
 	.irq_clear		= qs_irq_clear,
 	.irq_on			= ata_irq_on,
 	.irq_ack		= ata_irq_ack,
@@ -173,7 +171,6 @@ static const struct ata_port_operations qs_ata_ops = {
 static const struct ata_port_info qs_port_info[] = {
 	/* board_2068_idx */
 	{
-		.sht		= &qs_ata_sht,
 		.flags		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
 				  ATA_FLAG_SATA_RESET |
 				  //FIXME ATA_FLAG_SRST |
@@ -530,16 +527,16 @@ static void qs_host_stop(struct ata_host *host)
 	writeb(QS_CNFG3_GSRST, mmio_base + QS_HCF_CNFG3); /* global reset */
 }
 
-static void qs_host_init(unsigned int chip_id, struct ata_probe_ent *pe)
+static void qs_host_init(struct ata_host *host, unsigned int chip_id)
 {
-	void __iomem *mmio_base = pe->iomap[QS_MMIO_BAR];
+	void __iomem *mmio_base = host->iomap[QS_MMIO_BAR];
 	unsigned int port_no;
 
 	writeb(0, mmio_base + QS_HCT_CTRL); /* disable host interrupts */
 	writeb(QS_CNFG3_GSRST, mmio_base + QS_HCF_CNFG3); /* global reset */
 
 	/* reset each channel in turn */
-	for (port_no = 0; port_no < pe->n_ports; ++port_no) {
+	for (port_no = 0; port_no < host->n_ports; ++port_no) {
 		u8 __iomem *chan = mmio_base + (port_no * 0x4000);
 		writeb(QS_CTR1_RDEV|QS_CTR1_RCHN, chan + QS_CCT_CTR1);
 		writeb(QS_CTR0_REG, chan + QS_CCT_CTR0);
@@ -547,7 +544,7 @@ static void qs_host_init(unsigned int chip_id, struct ata_probe_ent *pe)
 	}
 	writeb(QS_SERD3_PHY_ENA, mmio_base + QS_HVS_SERD3); /* enable phy */
 
-	for (port_no = 0; port_no < pe->n_ports; ++port_no) {
+	for (port_no = 0; port_no < host->n_ports; ++port_no) {
 		u8 __iomem *chan = mmio_base + (port_no * 0x4000);
 		/* set FIFO depths to same settings as Windows driver */
 		writew(32, chan + QS_CFC_HUFT);
@@ -607,14 +604,20 @@ static int qs_ata_init_one(struct pci_dev *pdev,
 				const struct pci_device_id *ent)
 {
 	static int printed_version;
-	struct ata_probe_ent *probe_ent;
-	void __iomem * const *iomap;
 	unsigned int board_idx = (unsigned int) ent->driver_data;
+	const struct ata_port_info *ppi[] = { &qs_port_info[board_idx], NULL };
+	struct ata_host *host;
 	int rc, port_no;
 
 	if (!printed_version++)
 		dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
 
+	/* alloc host */
+	host = ata_host_alloc_pinfo(&pdev->dev, ppi, QS_PORTS);
+	if (!host)
+		return -ENOMEM;
+
+	/* acquire resources and fill host */
 	rc = pcim_enable_device(pdev);
 	if (rc)
 		return rc;
@@ -625,47 +628,24 @@ static int qs_ata_init_one(struct pci_dev *pdev,
 	rc = pcim_iomap_regions(pdev, 1 << QS_MMIO_BAR, DRV_NAME);
 	if (rc)
 		return rc;
-	iomap = pcim_iomap_table(pdev);
+	host->iomap = pcim_iomap_table(pdev);
 
-	rc = qs_set_dma_masks(pdev, iomap[QS_MMIO_BAR]);
+	rc = qs_set_dma_masks(pdev, host->iomap[QS_MMIO_BAR]);
 	if (rc)
 		return rc;
 
-	probe_ent = devm_kzalloc(&pdev->dev, sizeof(*probe_ent), GFP_KERNEL);
-	if (probe_ent == NULL)
-		return -ENOMEM;
-
-	probe_ent->dev = pci_dev_to_dev(pdev);
-	INIT_LIST_HEAD(&probe_ent->node);
-
-	probe_ent->sht		= qs_port_info[board_idx].sht;
-	probe_ent->port_flags	= qs_port_info[board_idx].flags;
-	probe_ent->pio_mask	= qs_port_info[board_idx].pio_mask;
-	probe_ent->mwdma_mask	= qs_port_info[board_idx].mwdma_mask;
-	probe_ent->udma_mask	= qs_port_info[board_idx].udma_mask;
-	probe_ent->port_ops	= qs_port_info[board_idx].port_ops;
-
-	probe_ent->irq		= pdev->irq;
-	probe_ent->irq_flags	= IRQF_SHARED;
-	probe_ent->iomap	= iomap;
-	probe_ent->n_ports	= QS_PORTS;
-
-	for (port_no = 0; port_no < probe_ent->n_ports; ++port_no) {
+	for (port_no = 0; port_no < host->n_ports; ++port_no) {
 		void __iomem *chan =
-			probe_ent->iomap[QS_MMIO_BAR] + (port_no * 0x4000);
-		qs_ata_setup_port(&probe_ent->port[port_no], chan);
+			host->iomap[QS_MMIO_BAR] + (port_no * 0x4000);
+		qs_ata_setup_port(&host->ports[port_no]->ioaddr, chan);
 	}
 
-	pci_set_master(pdev);
-
 	/* initialize adapter */
-	qs_host_init(board_idx, probe_ent);
+	qs_host_init(host, board_idx);
 
-	if (ata_device_add(probe_ent) != QS_PORTS)
-		return -EIO;
-
-	devm_kfree(&pdev->dev, probe_ent);
-	return 0;
+	pci_set_master(pdev);
+	return ata_host_activate(host, pdev->irq, qs_intr, IRQF_SHARED,
+				 &qs_ata_sht);
 }
 
 static int __init qs_ata_init(void)
diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c
index 917b7ea..0a1e417 100644
--- a/drivers/ata/sata_sil.c
+++ b/drivers/ata/sata_sil.c
@@ -46,7 +46,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"sata_sil"
-#define DRV_VERSION	"2.1"
+#define DRV_VERSION	"2.2"
 
 enum {
 	SIL_MMIO_BAR		= 5,
@@ -114,11 +114,10 @@ static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent);
 #ifdef CONFIG_PM
 static int sil_pci_device_resume(struct pci_dev *pdev);
 #endif
-static void sil_dev_config(struct ata_port *ap, struct ata_device *dev);
+static void sil_dev_config(struct ata_device *dev);
 static u32 sil_scr_read (struct ata_port *ap, unsigned int sc_reg);
 static void sil_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val);
-static void sil_post_set_mode (struct ata_port *ap);
-static irqreturn_t sil_interrupt(int irq, void *dev_instance);
+static int sil_set_mode (struct ata_port *ap, struct ata_device **r_failed);
 static void sil_freeze(struct ata_port *ap);
 static void sil_thaw(struct ata_port *ap);
 
@@ -197,7 +196,7 @@ static const struct ata_port_operations sil_ops = {
 	.check_status		= ata_check_status,
 	.exec_command		= ata_exec_command,
 	.dev_select		= ata_std_dev_select,
-	.post_set_mode		= sil_post_set_mode,
+	.set_mode		= sil_set_mode,
 	.bmdma_setup            = ata_bmdma_setup,
 	.bmdma_start            = ata_bmdma_start,
 	.bmdma_stop		= ata_bmdma_stop,
@@ -209,7 +208,6 @@ static const struct ata_port_operations sil_ops = {
 	.thaw			= sil_thaw,
 	.error_handler		= ata_bmdma_error_handler,
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
-	.irq_handler		= sil_interrupt,
 	.irq_clear		= ata_bmdma_irq_clear,
 	.irq_on			= ata_irq_on,
 	.irq_ack		= ata_irq_ack,
@@ -221,7 +219,6 @@ static const struct ata_port_operations sil_ops = {
 static const struct ata_port_info sil_port_info[] = {
 	/* sil_3112 */
 	{
-		.sht		= &sil_sht,
 		.flags		= SIL_DFL_PORT_FLAGS | SIL_FLAG_MOD15WRITE,
 		.pio_mask	= 0x1f,			/* pio0-4 */
 		.mwdma_mask	= 0x07,			/* mwdma0-2 */
@@ -230,7 +227,6 @@ static const struct ata_port_info sil_port_info[] = {
 	},
 	/* sil_3112_no_sata_irq */
 	{
-		.sht		= &sil_sht,
 		.flags		= SIL_DFL_PORT_FLAGS | SIL_FLAG_MOD15WRITE |
 				  SIL_FLAG_NO_SATA_IRQ,
 		.pio_mask	= 0x1f,			/* pio0-4 */
@@ -240,7 +236,6 @@ static const struct ata_port_info sil_port_info[] = {
 	},
 	/* sil_3512 */
 	{
-		.sht		= &sil_sht,
 		.flags		= SIL_DFL_PORT_FLAGS | SIL_FLAG_RERR_ON_DMA_ACT,
 		.pio_mask	= 0x1f,			/* pio0-4 */
 		.mwdma_mask	= 0x07,			/* mwdma0-2 */
@@ -249,7 +244,6 @@ static const struct ata_port_info sil_port_info[] = {
 	},
 	/* sil_3114 */
 	{
-		.sht		= &sil_sht,
 		.flags		= SIL_DFL_PORT_FLAGS | SIL_FLAG_RERR_ON_DMA_ACT,
 		.pio_mask	= 0x1f,			/* pio0-4 */
 		.mwdma_mask	= 0x07,			/* mwdma0-2 */
@@ -297,7 +291,16 @@ static unsigned char sil_get_device_cache_line(struct pci_dev *pdev)
 	return cache_line;
 }
 
-static void sil_post_set_mode (struct ata_port *ap)
+/**
+ *	sil_set_mode		-	wrap set_mode functions
+ *	@ap: port to set up
+ *	@r_failed: returned device when we fail
+ *
+ *	Wrap the libata method for device setup as after the setup we need
+ *	to inspect the results and do some configuration work
+ */
+
+static int sil_set_mode (struct ata_port *ap, struct ata_device **r_failed)
 {
 	struct ata_host *host = ap->host;
 	struct ata_device *dev;
@@ -305,6 +308,11 @@ static void sil_post_set_mode (struct ata_port *ap)
 	void __iomem *addr = mmio_base + sil_port[ap->port_no].xfer_mode;
 	u32 tmp, dev_mode[2];
 	unsigned int i;
+	int rc;
+	
+	rc = ata_do_set_mode(ap, r_failed);
+	if (rc)
+		return rc;
 
 	for (i = 0; i < 2; i++) {
 		dev = &ap->device[i];
@@ -323,6 +331,7 @@ static void sil_post_set_mode (struct ata_port *ap)
 	tmp |= (dev_mode[1] << 4);
 	writel(tmp, addr);
 	readl(addr);	/* flush */
+	return 0;
 }
 
 static inline void __iomem *sil_scr_addr(struct ata_port *ap, unsigned int sc_reg)
@@ -521,7 +530,6 @@ static void sil_thaw(struct ata_port *ap)
 
 /**
  *	sil_dev_config - Apply device/host-specific errata fixups
- *	@ap: Port containing device to be examined
  *	@dev: Device to be examined
  *
  *	After the IDENTIFY [PACKET] DEVICE step is complete, and a
@@ -548,8 +556,9 @@ static void sil_thaw(struct ata_port *ap)
  *	appreciated.
  *	- But then again UDMA5 is hardly anything to complain about
  */
-static void sil_dev_config(struct ata_port *ap, struct ata_device *dev)
+static void sil_dev_config(struct ata_device *dev)
 {
+	struct ata_port *ap = dev->ap;
 	int print_info = ap->eh_context.i.flags & ATA_EHI_PRINTINFO;
 	unsigned int n, quirks = 0;
 	unsigned char model_num[ATA_ID_PROD_LEN + 1];
@@ -583,10 +592,10 @@ static void sil_dev_config(struct ata_port *ap, struct ata_device *dev)
 	}
 }
 
-static void sil_init_controller(struct pci_dev *pdev,
-				int n_ports, unsigned long port_flags,
-				void __iomem *mmio_base)
+static void sil_init_controller(struct ata_host *host)
 {
+	struct pci_dev *pdev = to_pci_dev(host->dev);
+	void __iomem *mmio_base = host->iomap[SIL_MMIO_BAR];
 	u8 cls;
 	u32 tmp;
 	int i;
@@ -596,7 +605,7 @@ static void sil_init_controller(struct pci_dev *pdev,
 	if (cls) {
 		cls >>= 3;
 		cls++;  /* cls = (line_size/8)+1 */
-		for (i = 0; i < n_ports; i++)
+		for (i = 0; i < host->n_ports; i++)
 			writew(cls << 8 | cls,
 			       mmio_base + sil_port[i].fifo_cfg);
 	} else
@@ -604,10 +613,10 @@ static void sil_init_controller(struct pci_dev *pdev,
 			   "cache line size not set.  Driver may not function\n");
 
 	/* Apply R_ERR on DMA activate FIS errata workaround */
-	if (port_flags & SIL_FLAG_RERR_ON_DMA_ACT) {
+	if (host->ports[0]->flags & SIL_FLAG_RERR_ON_DMA_ACT) {
 		int cnt;
 
-		for (i = 0, cnt = 0; i < n_ports; i++) {
+		for (i = 0, cnt = 0; i < host->n_ports; i++) {
 			tmp = readl(mmio_base + sil_port[i].sfis_cfg);
 			if ((tmp & 0x3) != 0x01)
 				continue;
@@ -620,7 +629,7 @@ static void sil_init_controller(struct pci_dev *pdev,
 		}
 	}
 
-	if (n_ports == 4) {
+	if (host->n_ports == 4) {
 		/* flip the magic "make 4 ports work" bit */
 		tmp = readl(mmio_base + sil_port[2].bmdma);
 		if ((tmp & SIL_INTR_STEERING) == 0)
@@ -632,15 +641,26 @@ static void sil_init_controller(struct pci_dev *pdev,
 static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 {
 	static int printed_version;
-	struct device *dev = &pdev->dev;
-	struct ata_probe_ent *probe_ent;
+	int board_id = ent->driver_data;
+	const struct ata_port_info *ppi[] = { &sil_port_info[board_id], NULL };
+	struct ata_host *host;
 	void __iomem *mmio_base;
-	int rc;
+	int n_ports, rc;
 	unsigned int i;
 
 	if (!printed_version++)
 		dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
 
+	/* allocate host */
+	n_ports = 2;
+	if (board_id == sil_3114)
+		n_ports = 4;
+
+	host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports);
+	if (!host)
+		return -ENOMEM;
+
+	/* acquire resources and fill host */
 	rc = pcim_enable_device(pdev);
 	if (rc)
 		return rc;
@@ -650,6 +670,7 @@ static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 		pcim_pin_device(pdev);
 	if (rc)
 		return rc;
+	host->iomap = pcim_iomap_table(pdev);
 
 	rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
 	if (rc)
@@ -658,45 +679,25 @@ static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (rc)
 		return rc;
 
-	probe_ent = devm_kzalloc(dev, sizeof(*probe_ent), GFP_KERNEL);
-	if (probe_ent == NULL)
-		return -ENOMEM;
+	mmio_base = host->iomap[SIL_MMIO_BAR];
 
-	INIT_LIST_HEAD(&probe_ent->node);
-	probe_ent->dev = pci_dev_to_dev(pdev);
-	probe_ent->port_ops = sil_port_info[ent->driver_data].port_ops;
-	probe_ent->sht = sil_port_info[ent->driver_data].sht;
-	probe_ent->n_ports = (ent->driver_data == sil_3114) ? 4 : 2;
-	probe_ent->pio_mask = sil_port_info[ent->driver_data].pio_mask;
-	probe_ent->mwdma_mask = sil_port_info[ent->driver_data].mwdma_mask;
-	probe_ent->udma_mask = sil_port_info[ent->driver_data].udma_mask;
-       	probe_ent->irq = pdev->irq;
-       	probe_ent->irq_flags = IRQF_SHARED;
-	probe_ent->port_flags = sil_port_info[ent->driver_data].flags;
-
-	probe_ent->iomap = pcim_iomap_table(pdev);
-
-	mmio_base = probe_ent->iomap[SIL_MMIO_BAR];
-
-	for (i = 0; i < probe_ent->n_ports; i++) {
-		probe_ent->port[i].cmd_addr = mmio_base + sil_port[i].tf;
-		probe_ent->port[i].altstatus_addr =
-		probe_ent->port[i].ctl_addr = mmio_base + sil_port[i].ctl;
-		probe_ent->port[i].bmdma_addr = mmio_base + sil_port[i].bmdma;
-		probe_ent->port[i].scr_addr = mmio_base + sil_port[i].scr;
-		ata_std_ports(&probe_ent->port[i]);
+	for (i = 0; i < host->n_ports; i++) {
+		struct ata_ioports *ioaddr = &host->ports[i]->ioaddr;
+
+		ioaddr->cmd_addr = mmio_base + sil_port[i].tf;
+		ioaddr->altstatus_addr =
+		ioaddr->ctl_addr = mmio_base + sil_port[i].ctl;
+		ioaddr->bmdma_addr = mmio_base + sil_port[i].bmdma;
+		ioaddr->scr_addr = mmio_base + sil_port[i].scr;
+		ata_std_ports(ioaddr);
 	}
 
-	sil_init_controller(pdev, probe_ent->n_ports, probe_ent->port_flags,
-			    mmio_base);
+	/* initialize and activate */
+	sil_init_controller(host);
 
 	pci_set_master(pdev);
-
-	if (!ata_device_add(probe_ent))
-		return -ENODEV;
-
-	devm_kfree(dev, probe_ent);
-	return 0;
+	return ata_host_activate(host, pdev->irq, sil_interrupt, IRQF_SHARED,
+				 &sil_sht);
 }
 
 #ifdef CONFIG_PM
@@ -709,8 +710,7 @@ static int sil_pci_device_resume(struct pci_dev *pdev)
 	if (rc)
 		return rc;
 
-	sil_init_controller(pdev, host->n_ports, host->ports[0]->flags,
-			    host->iomap[SIL_MMIO_BAR]);
+	sil_init_controller(host);
 	ata_host_resume(host);
 
 	return 0;
diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c
index 5614df8..e6223ba 100644
--- a/drivers/ata/sata_sil24.c
+++ b/drivers/ata/sata_sil24.c
@@ -323,7 +323,7 @@ struct sil24_port_priv {
 	struct ata_taskfile tf;			/* Cached taskfile registers */
 };
 
-static void sil24_dev_config(struct ata_port *ap, struct ata_device *dev);
+static void sil24_dev_config(struct ata_device *dev);
 static u8 sil24_check_status(struct ata_port *ap);
 static u32 sil24_scr_read(struct ata_port *ap, unsigned sc_reg);
 static void sil24_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val);
@@ -331,7 +331,6 @@ static void sil24_tf_read(struct ata_port *ap, struct ata_taskfile *tf);
 static void sil24_qc_prep(struct ata_queued_cmd *qc);
 static unsigned int sil24_qc_issue(struct ata_queued_cmd *qc);
 static void sil24_irq_clear(struct ata_port *ap);
-static irqreturn_t sil24_interrupt(int irq, void *dev_instance);
 static void sil24_freeze(struct ata_port *ap);
 static void sil24_thaw(struct ata_port *ap);
 static void sil24_error_handler(struct ata_port *ap);
@@ -401,7 +400,6 @@ static const struct ata_port_operations sil24_ops = {
 	.qc_prep		= sil24_qc_prep,
 	.qc_issue		= sil24_qc_issue,
 
-	.irq_handler		= sil24_interrupt,
 	.irq_clear		= sil24_irq_clear,
 	.irq_on			= ata_dummy_irq_on,
 	.irq_ack		= ata_dummy_irq_ack,
@@ -424,10 +422,9 @@ static const struct ata_port_operations sil24_ops = {
 #define SIL24_NPORTS2FLAG(nports)	((((unsigned)(nports) - 1) & 0x3) << 30)
 #define SIL24_FLAG2NPORTS(flag)		((((flag) >> 30) & 0x3) + 1)
 
-static struct ata_port_info sil24_port_info[] = {
+static const struct ata_port_info sil24_port_info[] = {
 	/* sil_3124 */
 	{
-		.sht		= &sil24_sht,
 		.flags		= SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(4) |
 				  SIL24_FLAG_PCIX_IRQ_WOC,
 		.pio_mask	= 0x1f,			/* pio0-4 */
@@ -437,7 +434,6 @@ static struct ata_port_info sil24_port_info[] = {
 	},
 	/* sil_3132 */
 	{
-		.sht		= &sil24_sht,
 		.flags		= SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(2),
 		.pio_mask	= 0x1f,			/* pio0-4 */
 		.mwdma_mask	= 0x07,			/* mwdma0-2 */
@@ -446,7 +442,6 @@ static struct ata_port_info sil24_port_info[] = {
 	},
 	/* sil_3131/sil_3531 */
 	{
-		.sht		= &sil24_sht,
 		.flags		= SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(1),
 		.pio_mask	= 0x1f,			/* pio0-4 */
 		.mwdma_mask	= 0x07,			/* mwdma0-2 */
@@ -462,9 +457,9 @@ static int sil24_tag(int tag)
 	return tag;
 }
 
-static void sil24_dev_config(struct ata_port *ap, struct ata_device *dev)
+static void sil24_dev_config(struct ata_device *dev)
 {
-	void __iomem *port = ap->ioaddr.cmd_addr;
+	void __iomem *port = dev->ap->ioaddr.cmd_addr;
 
 	if (dev->cdb_len == 16)
 		writel(PORT_CS_CDB16, port + PORT_CTRL_STAT);
@@ -924,11 +919,8 @@ static void sil24_post_internal_cmd(struct ata_queued_cmd *qc)
 {
 	struct ata_port *ap = qc->ap;
 
-	if (qc->flags & ATA_QCFLAG_FAILED)
-		qc->err_mask |= AC_ERR_OTHER;
-
 	/* make DMA engine forget about the failed command */
-	if (qc->err_mask)
+	if (qc->flags & ATA_QCFLAG_FAILED)
 		sil24_init_port(ap);
 }
 
@@ -964,11 +956,10 @@ static int sil24_port_start(struct ata_port *ap)
 	return 0;
 }
 
-static void sil24_init_controller(struct pci_dev *pdev, int n_ports,
-				  unsigned long port_flags,
-				  void __iomem *host_base,
-				  void __iomem *port_base)
+static void sil24_init_controller(struct ata_host *host)
 {
+	void __iomem *host_base = host->iomap[SIL24_HOST_BAR];
+	void __iomem *port_base = host->iomap[SIL24_PORT_BAR];
 	u32 tmp;
 	int i;
 
@@ -979,7 +970,7 @@ static void sil24_init_controller(struct pci_dev *pdev, int n_ports,
 	writel(0, host_base + HOST_CTRL);
 
 	/* init ports */
-	for (i = 0; i < n_ports; i++) {
+	for (i = 0; i < host->n_ports; i++) {
 		void __iomem *port = port_base + i * PORT_REGS_SIZE;
 
 		/* Initial PHY setting */
@@ -993,12 +984,12 @@ static void sil24_init_controller(struct pci_dev *pdev, int n_ports,
 						PORT_CS_PORT_RST,
 						PORT_CS_PORT_RST, 10, 100);
 			if (tmp & PORT_CS_PORT_RST)
-				dev_printk(KERN_ERR, &pdev->dev,
+				dev_printk(KERN_ERR, host->dev,
 				           "failed to clear port RST\n");
 		}
 
 		/* Configure IRQ WoC */
-		if (port_flags & SIL24_FLAG_PCIX_IRQ_WOC)
+		if (host->ports[0]->flags & SIL24_FLAG_PCIX_IRQ_WOC)
 			writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_STAT);
 		else
 			writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_CLR);
@@ -1026,18 +1017,17 @@ static void sil24_init_controller(struct pci_dev *pdev, int n_ports,
 static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 {
 	static int printed_version = 0;
-	struct device *dev = &pdev->dev;
-	unsigned int board_id = (unsigned int)ent->driver_data;
-	struct ata_port_info *pinfo = &sil24_port_info[board_id];
-	struct ata_probe_ent *probe_ent;
-	void __iomem *host_base;
-	void __iomem *port_base;
+	struct ata_port_info pi = sil24_port_info[ent->driver_data];
+	const struct ata_port_info *ppi[] = { &pi, NULL };
+	void __iomem * const *iomap;
+	struct ata_host *host;
 	int i, rc;
 	u32 tmp;
 
 	if (!printed_version++)
 		dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
 
+	/* acquire resources */
 	rc = pcim_enable_device(pdev);
 	if (rc)
 		return rc;
@@ -1047,33 +1037,36 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 				DRV_NAME);
 	if (rc)
 		return rc;
+	iomap = pcim_iomap_table(pdev);
 
-	/* allocate & init probe_ent */
-	probe_ent = devm_kzalloc(dev, sizeof(*probe_ent), GFP_KERNEL);
-	if (!probe_ent)
-		return -ENOMEM;
+	/* apply workaround for completion IRQ loss on PCI-X errata */
+	if (pi.flags & SIL24_FLAG_PCIX_IRQ_WOC) {
+		tmp = readl(iomap[SIL24_HOST_BAR] + HOST_CTRL);
+		if (tmp & (HOST_CTRL_TRDY | HOST_CTRL_STOP | HOST_CTRL_DEVSEL))
+			dev_printk(KERN_INFO, &pdev->dev,
+				   "Applying completion IRQ loss on PCI-X "
+				   "errata fix\n");
+		else
+			pi.flags &= ~SIL24_FLAG_PCIX_IRQ_WOC;
+	}
 
-	probe_ent->dev = pci_dev_to_dev(pdev);
-	INIT_LIST_HEAD(&probe_ent->node);
+	/* allocate and fill host */
+	host = ata_host_alloc_pinfo(&pdev->dev, ppi,
+				    SIL24_FLAG2NPORTS(ppi[0]->flags));
+	if (!host)
+		return -ENOMEM;
+	host->iomap = iomap;
 
-	probe_ent->sht		= pinfo->sht;
-	probe_ent->port_flags	= pinfo->flags;
-	probe_ent->pio_mask	= pinfo->pio_mask;
-	probe_ent->mwdma_mask	= pinfo->mwdma_mask;
-	probe_ent->udma_mask	= pinfo->udma_mask;
-	probe_ent->port_ops	= pinfo->port_ops;
-	probe_ent->n_ports	= SIL24_FLAG2NPORTS(pinfo->flags);
+	for (i = 0; i < host->n_ports; i++) {
+		void __iomem *port = iomap[SIL24_PORT_BAR] + i * PORT_REGS_SIZE;
 
-	probe_ent->irq = pdev->irq;
-	probe_ent->irq_flags = IRQF_SHARED;
-	probe_ent->iomap = pcim_iomap_table(pdev);
+		host->ports[i]->ioaddr.cmd_addr = port;
+		host->ports[i]->ioaddr.scr_addr = port + PORT_SCONTROL;
 
-	host_base = probe_ent->iomap[SIL24_HOST_BAR];
-	port_base = probe_ent->iomap[SIL24_PORT_BAR];
+		ata_std_ports(&host->ports[i]->ioaddr);
+	}
 
-	/*
-	 * Configure the device
-	 */
+	/* configure and activate the device */
 	if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK)) {
 		rc = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK);
 		if (rc) {
@@ -1099,36 +1092,11 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 		}
 	}
 
-	/* Apply workaround for completion IRQ loss on PCI-X errata */
-	if (probe_ent->port_flags & SIL24_FLAG_PCIX_IRQ_WOC) {
-		tmp = readl(host_base + HOST_CTRL);
-		if (tmp & (HOST_CTRL_TRDY | HOST_CTRL_STOP | HOST_CTRL_DEVSEL))
-			dev_printk(KERN_INFO, &pdev->dev,
-				   "Applying completion IRQ loss on PCI-X "
-				   "errata fix\n");
-		else
-			probe_ent->port_flags &= ~SIL24_FLAG_PCIX_IRQ_WOC;
-	}
-
-	for (i = 0; i < probe_ent->n_ports; i++) {
-		void __iomem *port = port_base + i * PORT_REGS_SIZE;
-
-		probe_ent->port[i].cmd_addr = port;
-		probe_ent->port[i].scr_addr = port + PORT_SCONTROL;
-
-		ata_std_ports(&probe_ent->port[i]);
-	}
-
-	sil24_init_controller(pdev, probe_ent->n_ports, probe_ent->port_flags,
-			      host_base, port_base);
+	sil24_init_controller(host);
 
 	pci_set_master(pdev);
-
-	if (!ata_device_add(probe_ent))
-		return -ENODEV;
-
-	devm_kfree(dev, probe_ent);
-	return 0;
+	return ata_host_activate(host, pdev->irq, sil24_interrupt, IRQF_SHARED,
+				 &sil24_sht);
 }
 
 #ifdef CONFIG_PM
@@ -1136,7 +1104,6 @@ static int sil24_pci_device_resume(struct pci_dev *pdev)
 {
 	struct ata_host *host = dev_get_drvdata(&pdev->dev);
 	void __iomem *host_base = host->iomap[SIL24_HOST_BAR];
-	void __iomem *port_base = host->iomap[SIL24_PORT_BAR];
 	int rc;
 
 	rc = ata_pci_device_do_resume(pdev);
@@ -1146,8 +1113,7 @@ static int sil24_pci_device_resume(struct pci_dev *pdev)
 	if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND)
 		writel(HOST_CTRL_GLOBAL_RST, host_base + HOST_CTRL);
 
-	sil24_init_controller(pdev, host->n_ports, host->ports[0]->flags,
-			      host_base, port_base);
+	sil24_init_controller(host);
 
 	ata_host_resume(host);
 
diff --git a/drivers/ata/sata_sis.c b/drivers/ata/sata_sis.c
index a787f0d..d8ee062 100644
--- a/drivers/ata/sata_sis.c
+++ b/drivers/ata/sata_sis.c
@@ -121,7 +121,6 @@ static const struct ata_port_operations sis_ops = {
 	.thaw			= ata_bmdma_thaw,
 	.error_handler		= ata_bmdma_error_handler,
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
-	.irq_handler		= ata_interrupt,
 	.irq_clear		= ata_bmdma_irq_clear,
 	.irq_on			= ata_irq_on,
 	.irq_ack		= ata_irq_ack,
@@ -131,7 +130,6 @@ static const struct ata_port_operations sis_ops = {
 };
 
 static struct ata_port_info sis_port_info = {
-	.sht		= &sis_sht,
 	.flags		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY,
 	.pio_mask	= 0x1f,
 	.mwdma_mask	= 0x7,
@@ -256,12 +254,13 @@ static void sis_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val)
 static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 {
 	static int printed_version;
-	struct ata_probe_ent *probe_ent = NULL;
-	int rc;
+	struct ata_port_info pi = sis_port_info;
+	const struct ata_port_info *ppi[2] = { &pi, &pi };
+	struct ata_host *host;
 	u32 genctl, val;
-	struct ata_port_info pi = sis_port_info, *ppi[2] = { &pi, &pi };
 	u8 pmr;
 	u8 port2_start = 0x20;
+	int rc;
 
 	if (!printed_version++)
 		dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n");
@@ -270,19 +269,6 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (rc)
 		return rc;
 
-	rc = pci_request_regions(pdev, DRV_NAME);
-	if (rc) {
-		pcim_pin_device(pdev);
-		return rc;
-	}
-
-	rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
-	if (rc)
-		return rc;
-	rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
-	if (rc)
-		return rc;
-
 	/* check and see if the SCRs are in IO space or PCI cfg space */
 	pci_read_config_dword(pdev, SIS_GENCTL, &genctl);
 	if ((genctl & GENCTL_IOMAPPED_SCR) == 0)
@@ -349,30 +335,26 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 		break;
 	}
 
-	probe_ent = ata_pci_init_native_mode(pdev, ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY);
-	if (!probe_ent)
-		return -ENOMEM;
+	rc = ata_pci_prepare_native_host(pdev, ppi, 2, &host);
+	if (rc)
+		return rc;
 
-	if (!(probe_ent->port_flags & SIS_FLAG_CFGSCR)) {
+	if (!(pi.flags & SIS_FLAG_CFGSCR)) {
 		void __iomem *mmio;
 
-		mmio = pcim_iomap(pdev, SIS_SCR_PCI_BAR, 0);
-		if (!mmio)
-			return -ENOMEM;
+		rc = pcim_iomap_regions(pdev, 1 << SIS_SCR_PCI_BAR, DRV_NAME);
+		if (rc)
+			return rc;
+		mmio = host->iomap[SIS_SCR_PCI_BAR];
 
-		probe_ent->port[0].scr_addr = mmio;
-		probe_ent->port[1].scr_addr = mmio + port2_start;
+		host->ports[0]->ioaddr.scr_addr = mmio;
+		host->ports[1]->ioaddr.scr_addr = mmio + port2_start;
 	}
 
 	pci_set_master(pdev);
 	pci_intx(pdev, 1);
-
-	if (!ata_device_add(probe_ent))
-		return -EIO;
-
-	devm_kfree(&pdev->dev, probe_ent);
-	return 0;
-
+	return ata_host_activate(host, pdev->irq, ata_interrupt, IRQF_SHARED,
+				 &sis_sht);
 }
 
 static int __init sis_init(void)
diff --git a/drivers/ata/sata_svw.c b/drivers/ata/sata_svw.c
index b121195..cc07aac 100644
--- a/drivers/ata/sata_svw.c
+++ b/drivers/ata/sata_svw.c
@@ -56,7 +56,9 @@
 #define DRV_VERSION	"2.1"
 
 enum {
-	K2_FLAG_NO_ATAPI_DMA		= (1 << 29),
+	/* ap->flags bits */
+	K2_FLAG_SATA_8_PORTS		= (1 << 24),
+	K2_FLAG_NO_ATAPI_DMA		= (1 << 25),
 
 	/* Taskfile registers offsets */
 	K2_SATA_TF_CMD_OFFSET		= 0x00,
@@ -90,17 +92,6 @@ enum {
 	board_svw8			= 1,
 };
 
-static const struct k2_board_info {
-	unsigned int		n_ports;
-	unsigned long		port_flags;
-} k2_board_info[] = {
-	/* board_svw4 */
-	{ 4, K2_FLAG_NO_ATAPI_DMA },
-
-	/* board_svw8 */
-	{ 8, K2_FLAG_NO_ATAPI_DMA },
-};
-
 static u8 k2_stat_check_status(struct ata_port *ap);
 
 
@@ -354,7 +345,6 @@ static const struct ata_port_operations k2_sata_ops = {
 	.thaw			= ata_bmdma_thaw,
 	.error_handler		= ata_bmdma_error_handler,
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
-	.irq_handler		= ata_interrupt,
 	.irq_clear		= ata_bmdma_irq_clear,
 	.irq_on			= ata_irq_on,
 	.irq_ack		= ata_irq_ack,
@@ -363,6 +353,28 @@ static const struct ata_port_operations k2_sata_ops = {
 	.port_start		= ata_port_start,
 };
 
+static const struct ata_port_info k2_port_info[] = {
+	/* board_svw4 */
+	{
+		.flags		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+				  ATA_FLAG_MMIO | K2_FLAG_NO_ATAPI_DMA,
+		.pio_mask	= 0x1f,
+		.mwdma_mask	= 0x07,
+		.udma_mask	= 0x7f,
+		.port_ops	= &k2_sata_ops,
+	},
+	/* board_svw8 */
+	{
+		.flags		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+				  ATA_FLAG_MMIO | K2_FLAG_NO_ATAPI_DMA |
+				  K2_FLAG_SATA_8_PORTS,
+		.pio_mask	= 0x1f,
+		.mwdma_mask	= 0x07,
+		.udma_mask	= 0x7f,
+		.port_ops	= &k2_sata_ops,
+	},
+};
+
 static void k2_sata_setup_port(struct ata_ioports *port, void __iomem *base)
 {
 	port->cmd_addr		= base + K2_SATA_TF_CMD_OFFSET;
@@ -386,17 +398,24 @@ static void k2_sata_setup_port(struct ata_ioports *port, void __iomem *base)
 static int k2_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 {
 	static int printed_version;
-	struct device *dev = &pdev->dev;
-	struct ata_probe_ent *probe_ent;
+	const struct ata_port_info *ppi[] =
+		{ &k2_port_info[ent->driver_data], NULL };
+	struct ata_host *host;
 	void __iomem *mmio_base;
-	const struct k2_board_info *board_info =
-			&k2_board_info[ent->driver_data];
-	int rc;
-	int i;
+	int n_ports, i, rc;
 
 	if (!printed_version++)
 		dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
 
+	/* allocate host */
+	n_ports = 4;
+	if (ppi[0]->flags & K2_FLAG_SATA_8_PORTS)
+		n_ports = 8;
+
+	host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports);
+	if (!host)
+		return -ENOMEM;
+
 	/*
 	 * If this driver happens to only be useful on Apple's K2, then
 	 * we should check that here as it has a normal Serverworks ID
@@ -404,6 +423,7 @@ static int k2_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *e
 	rc = pcim_enable_device(pdev);
 	if (rc)
 		return rc;
+
 	/*
 	 * Check if we have resources mapped at all (second function may
 	 * have been disabled by firmware)
@@ -417,6 +437,15 @@ static int k2_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *e
 		pcim_pin_device(pdev);
 	if (rc)
 		return rc;
+	host->iomap = pcim_iomap_table(pdev);
+	mmio_base = host->iomap[5];
+
+	/* different controllers have different number of ports - currently 4 or 8 */
+	/* All ports are on the same function. Multi-function device is no
+	 * longer available. This should not be seen in any system. */
+	for (i = 0; i < host->n_ports; i++)
+		k2_sata_setup_port(&host->ports[i]->ioaddr,
+				   mmio_base + i * K2_SATA_PORT_OFFSET);
 
 	rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
 	if (rc)
@@ -425,38 +454,6 @@ static int k2_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *e
 	if (rc)
 		return rc;
 
-	probe_ent = devm_kzalloc(dev, sizeof(*probe_ent), GFP_KERNEL);
-	if (probe_ent == NULL)
-		return -ENOMEM;
-
-	probe_ent->dev = pci_dev_to_dev(pdev);
-	INIT_LIST_HEAD(&probe_ent->node);
-
-	probe_ent->sht = &k2_sata_sht;
-	probe_ent->port_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
-				ATA_FLAG_MMIO | board_info->port_flags;
-	probe_ent->port_ops = &k2_sata_ops;
-	probe_ent->n_ports = 4;
-	probe_ent->irq = pdev->irq;
-	probe_ent->irq_flags = IRQF_SHARED;
-	probe_ent->iomap = pcim_iomap_table(pdev);
-
-	/* We don't care much about the PIO/UDMA masks, but the core won't like us
-	 * if we don't fill these
-	 */
-	probe_ent->pio_mask = 0x1f;
-	probe_ent->mwdma_mask = 0x7;
-	probe_ent->udma_mask = 0x7f;
-
-	mmio_base = probe_ent->iomap[5];
-
-	/* different controllers have different number of ports - currently 4 or 8 */
-	/* All ports are on the same function. Multi-function device is no
-	 * longer available. This should not be seen in any system. */
-	for (i = 0; i < board_info->n_ports; i++)
-		k2_sata_setup_port(&probe_ent->port[i],
-				   mmio_base + i * K2_SATA_PORT_OFFSET);
-
 	/* Clear a magic bit in SCR1 according to Darwin, those help
 	 * some funky seagate drives (though so far, those were already
 	 * set by the firmware on the machines I had access to)
@@ -469,12 +466,8 @@ static int k2_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *e
 	writel(0x0, mmio_base + K2_SATA_SIM_OFFSET);
 
 	pci_set_master(pdev);
-
-	if (!ata_device_add(probe_ent))
-		return -ENODEV;
-
-	devm_kfree(dev, probe_ent);
-	return 0;
+	return ata_host_activate(host, pdev->irq, ata_interrupt, IRQF_SHARED,
+				 &k2_sata_sht);
 }
 
 /* 0x240 is device ID for Apple K2 device
diff --git a/drivers/ata/sata_sx4.c b/drivers/ata/sata_sx4.c
index 1a081c3..3a4f445 100644
--- a/drivers/ata/sata_sx4.c
+++ b/drivers/ata/sata_sx4.c
@@ -151,24 +151,23 @@ struct pdc_host_priv {
 
 
 static int pdc_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *ent);
-static irqreturn_t pdc20621_interrupt (int irq, void *dev_instance);
 static void pdc_eng_timeout(struct ata_port *ap);
 static void pdc_20621_phy_reset (struct ata_port *ap);
 static int pdc_port_start(struct ata_port *ap);
 static void pdc20621_qc_prep(struct ata_queued_cmd *qc);
 static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf);
 static void pdc_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf);
-static unsigned int pdc20621_dimm_init(struct ata_probe_ent *pe);
-static int pdc20621_detect_dimm(struct ata_probe_ent *pe);
-static unsigned int pdc20621_i2c_read(struct ata_probe_ent *pe,
+static unsigned int pdc20621_dimm_init(struct ata_host *host);
+static int pdc20621_detect_dimm(struct ata_host *host);
+static unsigned int pdc20621_i2c_read(struct ata_host *host,
 				      u32 device, u32 subaddr, u32 *pdata);
-static int pdc20621_prog_dimm0(struct ata_probe_ent *pe);
-static unsigned int pdc20621_prog_dimm_global(struct ata_probe_ent *pe);
+static int pdc20621_prog_dimm0(struct ata_host *host);
+static unsigned int pdc20621_prog_dimm_global(struct ata_host *host);
 #ifdef ATA_VERBOSE_DEBUG
-static void pdc20621_get_from_dimm(struct ata_probe_ent *pe,
+static void pdc20621_get_from_dimm(struct ata_host *host,
 				   void *psource, u32 offset, u32 size);
 #endif
-static void pdc20621_put_to_dimm(struct ata_probe_ent *pe,
+static void pdc20621_put_to_dimm(struct ata_host *host,
 				 void *psource, u32 offset, u32 size);
 static void pdc20621_irq_clear(struct ata_port *ap);
 static unsigned int pdc20621_qc_issue_prot(struct ata_queued_cmd *qc);
@@ -204,7 +203,6 @@ static const struct ata_port_operations pdc_20621_ops = {
 	.qc_issue		= pdc20621_qc_issue_prot,
 	.data_xfer		= ata_data_xfer,
 	.eng_timeout		= pdc_eng_timeout,
-	.irq_handler		= pdc20621_interrupt,
 	.irq_clear		= pdc20621_irq_clear,
 	.irq_on			= ata_irq_on,
 	.irq_ack		= ata_irq_ack,
@@ -214,7 +212,6 @@ static const struct ata_port_operations pdc_20621_ops = {
 static const struct ata_port_info pdc_port_info[] = {
 	/* board_20621 */
 	{
-		.sht		= &pdc_sata_sht,
 		.flags		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
 				  ATA_FLAG_SRST | ATA_FLAG_MMIO |
 				  ATA_FLAG_NO_ATAPI | ATA_FLAG_PIO_POLLING,
@@ -882,15 +879,15 @@ static void pdc_sata_setup_port(struct ata_ioports *port, void __iomem *base)
 
 
 #ifdef ATA_VERBOSE_DEBUG
-static void pdc20621_get_from_dimm(struct ata_probe_ent *pe, void *psource,
+static void pdc20621_get_from_dimm(struct ata_host *host, void *psource,
 				   u32 offset, u32 size)
 {
 	u32 window_size;
 	u16 idx;
 	u8 page_mask;
 	long dist;
-	void __iomem *mmio = pe->iomap[PDC_MMIO_BAR];
-	void __iomem *dimm_mmio = pe->iomap[PDC_DIMM_BAR];
+	void __iomem *mmio = host->iomap[PDC_MMIO_BAR];
+	void __iomem *dimm_mmio = host->iomap[PDC_DIMM_BAR];
 
 	/* hard-code chip #0 */
 	mmio += PDC_CHIP0_OFS;
@@ -937,15 +934,15 @@ static void pdc20621_get_from_dimm(struct ata_probe_ent *pe, void *psource,
 #endif
 
 
-static void pdc20621_put_to_dimm(struct ata_probe_ent *pe, void *psource,
+static void pdc20621_put_to_dimm(struct ata_host *host, void *psource,
 				 u32 offset, u32 size)
 {
 	u32 window_size;
 	u16 idx;
 	u8 page_mask;
 	long dist;
-	void __iomem *mmio = pe->iomap[PDC_MMIO_BAR];
-	void __iomem *dimm_mmio = pe->iomap[PDC_DIMM_BAR];
+	void __iomem *mmio = host->iomap[PDC_MMIO_BAR];
+	void __iomem *dimm_mmio = host->iomap[PDC_DIMM_BAR];
 
 	/* hard-code chip #0 */
 	mmio += PDC_CHIP0_OFS;
@@ -987,10 +984,10 @@ static void pdc20621_put_to_dimm(struct ata_probe_ent *pe, void *psource,
 }
 
 
-static unsigned int pdc20621_i2c_read(struct ata_probe_ent *pe, u32 device,
+static unsigned int pdc20621_i2c_read(struct ata_host *host, u32 device,
 				      u32 subaddr, u32 *pdata)
 {
-	void __iomem *mmio = pe->iomap[PDC_MMIO_BAR];
+	void __iomem *mmio = host->iomap[PDC_MMIO_BAR];
 	u32 i2creg  = 0;
 	u32 status;
 	u32 count =0;
@@ -1023,17 +1020,17 @@ static unsigned int pdc20621_i2c_read(struct ata_probe_ent *pe, u32 device,
 }
 
 
-static int pdc20621_detect_dimm(struct ata_probe_ent *pe)
+static int pdc20621_detect_dimm(struct ata_host *host)
 {
 	u32 data=0 ;
-  	if (pdc20621_i2c_read(pe, PDC_DIMM0_SPD_DEV_ADDRESS,
+	if (pdc20621_i2c_read(host, PDC_DIMM0_SPD_DEV_ADDRESS,
 			     PDC_DIMM_SPD_SYSTEM_FREQ, &data)) {
    		if (data == 100)
 			return 100;
   	} else
 		return 0;
 
-   	if (pdc20621_i2c_read(pe, PDC_DIMM0_SPD_DEV_ADDRESS, 9, &data)) {
+	if (pdc20621_i2c_read(host, PDC_DIMM0_SPD_DEV_ADDRESS, 9, &data)) {
 		if(data <= 0x75)
 			return 133;
    	} else
@@ -1043,13 +1040,13 @@ static int pdc20621_detect_dimm(struct ata_probe_ent *pe)
 }
 
 
-static int pdc20621_prog_dimm0(struct ata_probe_ent *pe)
+static int pdc20621_prog_dimm0(struct ata_host *host)
 {
 	u32 spd0[50];
 	u32 data = 0;
    	int size, i;
    	u8 bdimmsize;
-	void __iomem *mmio = pe->iomap[PDC_MMIO_BAR];
+	void __iomem *mmio = host->iomap[PDC_MMIO_BAR];
 	static const struct {
 		unsigned int reg;
 		unsigned int ofs;
@@ -1072,7 +1069,7 @@ static int pdc20621_prog_dimm0(struct ata_probe_ent *pe)
 	mmio += PDC_CHIP0_OFS;
 
 	for(i=0; i<ARRAY_SIZE(pdc_i2c_read_data); i++)
-		pdc20621_i2c_read(pe, PDC_DIMM0_SPD_DEV_ADDRESS,
+		pdc20621_i2c_read(host, PDC_DIMM0_SPD_DEV_ADDRESS,
 				  pdc_i2c_read_data[i].reg,
 				  &spd0[pdc_i2c_read_data[i].ofs]);
 
@@ -1108,11 +1105,11 @@ static int pdc20621_prog_dimm0(struct ata_probe_ent *pe)
 }
 
 
-static unsigned int pdc20621_prog_dimm_global(struct ata_probe_ent *pe)
+static unsigned int pdc20621_prog_dimm_global(struct ata_host *host)
 {
 	u32 data, spd0;
 	int error, i;
-	void __iomem *mmio = pe->iomap[PDC_MMIO_BAR];
+	void __iomem *mmio = host->iomap[PDC_MMIO_BAR];
 
 	/* hard-code chip #0 */
    	mmio += PDC_CHIP0_OFS;
@@ -1129,7 +1126,7 @@ static unsigned int pdc20621_prog_dimm_global(struct ata_probe_ent *pe)
 	readl(mmio + PDC_SDRAM_CONTROL_OFFSET);
 
 	/* Turn on for ECC */
-	pdc20621_i2c_read(pe, PDC_DIMM0_SPD_DEV_ADDRESS,
+	pdc20621_i2c_read(host, PDC_DIMM0_SPD_DEV_ADDRESS,
 			  PDC_DIMM_SPD_TYPE, &spd0);
 	if (spd0 == 0x02) {
 		data |= (0x01 << 16);
@@ -1156,7 +1153,7 @@ static unsigned int pdc20621_prog_dimm_global(struct ata_probe_ent *pe)
 }
 
 
-static unsigned int pdc20621_dimm_init(struct ata_probe_ent *pe)
+static unsigned int pdc20621_dimm_init(struct ata_host *host)
 {
 	int speed, size, length;
 	u32 addr,spd0,pci_status;
@@ -1166,7 +1163,7 @@ static unsigned int pdc20621_dimm_init(struct ata_probe_ent *pe)
 	u32 ticks=0;
 	u32 clock=0;
 	u32 fparam=0;
-	void __iomem *mmio = pe->iomap[PDC_MMIO_BAR];
+	void __iomem *mmio = host->iomap[PDC_MMIO_BAR];
 
 	/* hard-code chip #0 */
    	mmio += PDC_CHIP0_OFS;
@@ -1225,18 +1222,18 @@ static unsigned int pdc20621_dimm_init(struct ata_probe_ent *pe)
 	   Read SPD of DIMM by I2C interface,
 	   and program the DIMM Module Controller.
 	*/
- 	if (!(speed = pdc20621_detect_dimm(pe))) {
+	if (!(speed = pdc20621_detect_dimm(host))) {
 		printk(KERN_ERR "Detect Local DIMM Fail\n");
 		return 1;	/* DIMM error */
    	}
    	VPRINTK("Local DIMM Speed = %d\n", speed);
 
    	/* Programming DIMM0 Module Control Register (index_CID0:80h) */
-   	size = pdc20621_prog_dimm0(pe);
+	size = pdc20621_prog_dimm0(host);
    	VPRINTK("Local DIMM Size = %dMB\n",size);
 
    	/* Programming DIMM Module Global Control Register (index_CID0:88h) */
-   	if (pdc20621_prog_dimm_global(pe)) {
+	if (pdc20621_prog_dimm_global(host)) {
 		printk(KERN_ERR "Programming DIMM Module Global Control Register Fail\n");
 		return 1;
    	}
@@ -1249,20 +1246,20 @@ static unsigned int pdc20621_dimm_init(struct ata_probe_ent *pe)
   				'9','8','0','3','1','6','1','2',0,0};
 		u8 test_parttern2[40] = {0};
 
-		pdc20621_put_to_dimm(pe, (void *) test_parttern2, 0x10040, 40);
-		pdc20621_put_to_dimm(pe, (void *) test_parttern2, 0x40, 40);
+		pdc20621_put_to_dimm(host, (void *) test_parttern2, 0x10040, 40);
+		pdc20621_put_to_dimm(host, (void *) test_parttern2, 0x40, 40);
 
-		pdc20621_put_to_dimm(pe, (void *) test_parttern1, 0x10040, 40);
-		pdc20621_get_from_dimm(pe, (void *) test_parttern2, 0x40, 40);
+		pdc20621_put_to_dimm(host, (void *) test_parttern1, 0x10040, 40);
+		pdc20621_get_from_dimm(host, (void *) test_parttern2, 0x40, 40);
 		printk(KERN_ERR "%x, %x, %s\n", test_parttern2[0],
 		       test_parttern2[1], &(test_parttern2[2]));
-		pdc20621_get_from_dimm(pe, (void *) test_parttern2, 0x10040,
+		pdc20621_get_from_dimm(host, (void *) test_parttern2, 0x10040,
 				       40);
 		printk(KERN_ERR "%x, %x, %s\n", test_parttern2[0],
 		       test_parttern2[1], &(test_parttern2[2]));
 
-		pdc20621_put_to_dimm(pe, (void *) test_parttern1, 0x40, 40);
-		pdc20621_get_from_dimm(pe, (void *) test_parttern2, 0x40, 40);
+		pdc20621_put_to_dimm(host, (void *) test_parttern1, 0x40, 40);
+		pdc20621_get_from_dimm(host, (void *) test_parttern2, 0x40, 40);
 		printk(KERN_ERR "%x, %x, %s\n", test_parttern2[0],
 		       test_parttern2[1], &(test_parttern2[2]));
 	}
@@ -1270,14 +1267,14 @@ static unsigned int pdc20621_dimm_init(struct ata_probe_ent *pe)
 
 	/* ECC initiliazation. */
 
-	pdc20621_i2c_read(pe, PDC_DIMM0_SPD_DEV_ADDRESS,
+	pdc20621_i2c_read(host, PDC_DIMM0_SPD_DEV_ADDRESS,
 			  PDC_DIMM_SPD_TYPE, &spd0);
 	if (spd0 == 0x02) {
 		VPRINTK("Start ECC initialization\n");
 		addr = 0;
 		length = size * 1024 * 1024;
 		while (addr < length) {
-			pdc20621_put_to_dimm(pe, (void *) &tmp, addr,
+			pdc20621_put_to_dimm(host, (void *) &tmp, addr,
 					     sizeof(u32));
 			addr += sizeof(u32);
 		}
@@ -1287,10 +1284,10 @@ static unsigned int pdc20621_dimm_init(struct ata_probe_ent *pe)
 }
 
 
-static void pdc_20621_init(struct ata_probe_ent *pe)
+static void pdc_20621_init(struct ata_host *host)
 {
 	u32 tmp;
-	void __iomem *mmio = pe->iomap[PDC_MMIO_BAR];
+	void __iomem *mmio = host->iomap[PDC_MMIO_BAR];
 
 	/* hard-code chip #0 */
 	mmio += PDC_CHIP0_OFS;
@@ -1321,15 +1318,25 @@ static void pdc_20621_init(struct ata_probe_ent *pe)
 static int pdc_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 {
 	static int printed_version;
-	struct ata_probe_ent *probe_ent;
+	const struct ata_port_info *ppi[] =
+		{ &pdc_port_info[ent->driver_data], NULL };
+	struct ata_host *host;
 	void __iomem *base;
 	struct pdc_host_priv *hpriv;
-	unsigned int board_idx = (unsigned int) ent->driver_data;
 	int rc;
 
 	if (!printed_version++)
 		dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
 
+	/* allocate host */
+	host = ata_host_alloc_pinfo(&pdev->dev, ppi, 4);
+	hpriv = devm_kzalloc(&pdev->dev, sizeof(*hpriv), GFP_KERNEL);
+	if (!host || !hpriv)
+		return -ENOMEM;
+
+	host->private_data = hpriv;
+
+	/* acquire resources and fill host */
 	rc = pcim_enable_device(pdev);
 	if (rc)
 		return rc;
@@ -1340,7 +1347,15 @@ static int pdc_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *
 		pcim_pin_device(pdev);
 	if (rc)
 		return rc;
+	host->iomap = pcim_iomap_table(pdev);
+
+	base = host->iomap[PDC_MMIO_BAR] + PDC_CHIP0_OFS;
+	pdc_sata_setup_port(&host->ports[0]->ioaddr, base + 0x200);
+	pdc_sata_setup_port(&host->ports[1]->ioaddr, base + 0x280);
+	pdc_sata_setup_port(&host->ports[2]->ioaddr, base + 0x300);
+	pdc_sata_setup_port(&host->ports[3]->ioaddr, base + 0x380);
 
+	/* configure and activate */
 	rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
 	if (rc)
 		return rc;
@@ -1348,50 +1363,13 @@ static int pdc_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *
 	if (rc)
 		return rc;
 
-	probe_ent = devm_kzalloc(&pdev->dev, sizeof(*probe_ent), GFP_KERNEL);
-	if (probe_ent == NULL)
+	if (pdc20621_dimm_init(host))
 		return -ENOMEM;
-
-	probe_ent->dev = pci_dev_to_dev(pdev);
-	INIT_LIST_HEAD(&probe_ent->node);
-
-	hpriv = devm_kzalloc(&pdev->dev, sizeof(*hpriv), GFP_KERNEL);
-	if (!hpriv)
-		return -ENOMEM;
-
-	probe_ent->sht		= pdc_port_info[board_idx].sht;
-	probe_ent->port_flags	= pdc_port_info[board_idx].flags;
-	probe_ent->pio_mask	= pdc_port_info[board_idx].pio_mask;
-	probe_ent->mwdma_mask	= pdc_port_info[board_idx].mwdma_mask;
-	probe_ent->udma_mask	= pdc_port_info[board_idx].udma_mask;
-	probe_ent->port_ops	= pdc_port_info[board_idx].port_ops;
-
-       	probe_ent->irq = pdev->irq;
-       	probe_ent->irq_flags = IRQF_SHARED;
-	probe_ent->iomap = pcim_iomap_table(pdev);
-
-	probe_ent->private_data = hpriv;
-	base = probe_ent->iomap[PDC_MMIO_BAR] + PDC_CHIP0_OFS;
-
-	probe_ent->n_ports = 4;
-	pdc_sata_setup_port(&probe_ent->port[0], base + 0x200);
-	pdc_sata_setup_port(&probe_ent->port[1], base + 0x280);
-	pdc_sata_setup_port(&probe_ent->port[2], base + 0x300);
-	pdc_sata_setup_port(&probe_ent->port[3], base + 0x380);
+	pdc_20621_init(host);
 
 	pci_set_master(pdev);
-
-	/* initialize adapter */
-	/* initialize local dimm */
-	if (pdc20621_dimm_init(probe_ent))
-		return -ENOMEM;
-	pdc_20621_init(probe_ent);
-
-	if (!ata_device_add(probe_ent))
-		return -ENODEV;
-
-	devm_kfree(&pdev->dev, probe_ent);
-	return 0;
+	return ata_host_activate(host, pdev->irq, pdc20621_interrupt,
+				 IRQF_SHARED, &pdc_sata_sht);
 }
 
 
diff --git a/drivers/ata/sata_uli.c b/drivers/ata/sata_uli.c
index d659ace..f74e383 100644
--- a/drivers/ata/sata_uli.c
+++ b/drivers/ata/sata_uli.c
@@ -115,7 +115,6 @@ static const struct ata_port_operations uli_ops = {
 	.error_handler		= ata_bmdma_error_handler,
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
 
-	.irq_handler		= ata_interrupt,
 	.irq_clear		= ata_bmdma_irq_clear,
 	.irq_on			= ata_irq_on,
 	.irq_ack		= ata_irq_ack,
@@ -127,7 +126,6 @@ static const struct ata_port_operations uli_ops = {
 };
 
 static struct ata_port_info uli_port_info = {
-	.sht            = &uli_sht,
 	.flags		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
 			  ATA_FLAG_IGN_SIMPLEX,
 	.pio_mask       = 0x1f,		/* pio0-4 */
@@ -185,12 +183,13 @@ static void uli_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val)
 static int uli_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 {
 	static int printed_version;
-	struct ata_probe_ent *probe_ent;
-	struct ata_port_info *ppi[2];
-	int rc;
+	const struct ata_port_info *ppi[] = { &uli_port_info, NULL };
 	unsigned int board_idx = (unsigned int) ent->driver_data;
+	struct ata_host *host;
 	struct uli_priv *hpriv;
 	void __iomem * const *iomap;
+	struct ata_ioports *ioaddr;
+	int n_ports, rc;
 
 	if (!printed_version++)
 		dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n");
@@ -199,54 +198,42 @@ static int uli_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (rc)
 		return rc;
 
-	rc = pci_request_regions(pdev, DRV_NAME);
-	if (rc) {
-		pcim_pin_device(pdev);
-		return rc;
-	}
-
-	rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
-	if (rc)
-		return rc;
-	rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
+	n_ports = 2;
+	if (board_idx == uli_5287)
+		n_ports = 4;
+	rc = ata_pci_prepare_native_host(pdev, ppi, n_ports, &host);
 	if (rc)
 		return rc;
 
-	ppi[0] = ppi[1] = &uli_port_info;
-	probe_ent = ata_pci_init_native_mode(pdev, ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY);
-	if (!probe_ent)
-		return -ENOMEM;
-
 	hpriv = devm_kzalloc(&pdev->dev, sizeof(*hpriv), GFP_KERNEL);
 	if (!hpriv)
 		return -ENOMEM;
+	host->private_data = hpriv;
 
-	probe_ent->private_data = hpriv;
-
-	iomap = pcim_iomap_table(pdev);
+	iomap = host->iomap;
 
 	switch (board_idx) {
 	case uli_5287:
 		hpriv->scr_cfg_addr[0] = ULI5287_BASE;
 		hpriv->scr_cfg_addr[1] = ULI5287_BASE + ULI5287_OFFS;
-       		probe_ent->n_ports = 4;
 
-		probe_ent->port[2].cmd_addr = iomap[0] + 8;
-		probe_ent->port[2].altstatus_addr =
-		probe_ent->port[2].ctl_addr = (void __iomem *)
+		ioaddr = &host->ports[2]->ioaddr;
+		ioaddr->cmd_addr = iomap[0] + 8;
+		ioaddr->altstatus_addr =
+		ioaddr->ctl_addr = (void __iomem *)
 			((unsigned long)iomap[1] | ATA_PCI_CTL_OFS) + 4;
-		probe_ent->port[2].bmdma_addr = iomap[4] + 16;
+		ioaddr->bmdma_addr = iomap[4] + 16;
 		hpriv->scr_cfg_addr[2] = ULI5287_BASE + ULI5287_OFFS*4;
+		ata_std_ports(ioaddr);
 
-		probe_ent->port[3].cmd_addr = iomap[2] + 8;
-		probe_ent->port[3].altstatus_addr =
-		probe_ent->port[3].ctl_addr = (void __iomem *)
+		ioaddr = &host->ports[3]->ioaddr;
+		ioaddr->cmd_addr = iomap[2] + 8;
+		ioaddr->altstatus_addr =
+		ioaddr->ctl_addr = (void __iomem *)
 			((unsigned long)iomap[3] | ATA_PCI_CTL_OFS) + 4;
-		probe_ent->port[3].bmdma_addr = iomap[4] + 24;
+		ioaddr->bmdma_addr = iomap[4] + 24;
 		hpriv->scr_cfg_addr[3] = ULI5287_BASE + ULI5287_OFFS*5;
-
-		ata_std_ports(&probe_ent->port[2]);
-		ata_std_ports(&probe_ent->port[3]);
+		ata_std_ports(ioaddr);
 		break;
 
 	case uli_5289:
@@ -266,12 +253,8 @@ static int uli_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	pci_set_master(pdev);
 	pci_intx(pdev, 1);
-
-	if (!ata_device_add(probe_ent))
-		return -ENODEV;
-
-	devm_kfree(&pdev->dev, probe_ent);
-	return 0;
+	return ata_host_activate(host, pdev->irq, ata_interrupt, IRQF_SHARED,
+				 &uli_sht);
 }
 
 static int __init uli_init(void)
diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c
index 598e6a2..1d855f5 100644
--- a/drivers/ata/sata_via.c
+++ b/drivers/ata/sata_via.c
@@ -64,8 +64,6 @@ enum {
 	PORT0			= (1 << 1),
 	PORT1			= (1 << 0),
 	ALL_PORTS		= PORT0 | PORT1,
-	PATA_PORT		= 2,	/* PATA is port 2 */
-	N_PORTS			= 3,
 
 	NATIVE_MODE_ALL		= (1 << 7) | (1 << 6) | (1 << 5) | (1 << 4),
 
@@ -78,11 +76,9 @@ static u32 svia_scr_read (struct ata_port *ap, unsigned int sc_reg);
 static void svia_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val);
 static void svia_noop_freeze(struct ata_port *ap);
 static void vt6420_error_handler(struct ata_port *ap);
-static void vt6421_sata_error_handler(struct ata_port *ap);
-static void vt6421_pata_error_handler(struct ata_port *ap);
+static int vt6421_pata_cable_detect(struct ata_port *ap);
 static void vt6421_set_pio_mode(struct ata_port *ap, struct ata_device *adev);
 static void vt6421_set_dma_mode(struct ata_port *ap, struct ata_device *adev);
-static int vt6421_port_start(struct ata_port *ap);
 
 static const struct pci_device_id svia_pci_tbl[] = {
 	{ PCI_VDEVICE(VIA, 0x5337), vt6420 },
@@ -141,7 +137,6 @@ static const struct ata_port_operations vt6420_sata_ops = {
 	.error_handler		= vt6420_error_handler,
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
 
-	.irq_handler		= ata_interrupt,
 	.irq_clear		= ata_bmdma_irq_clear,
 	.irq_on			= ata_irq_on,
 	.irq_ack		= ata_irq_ack,
@@ -172,15 +167,15 @@ static const struct ata_port_operations vt6421_pata_ops = {
 
 	.freeze			= ata_bmdma_freeze,
 	.thaw			= ata_bmdma_thaw,
-	.error_handler		= vt6421_pata_error_handler,
+	.error_handler		= ata_bmdma_error_handler,
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
+	.cable_detect		= vt6421_pata_cable_detect,
 
-	.irq_handler		= ata_interrupt,
 	.irq_clear		= ata_bmdma_irq_clear,
 	.irq_on			= ata_irq_on,
 	.irq_ack		= ata_irq_ack,
 
-	.port_start		= vt6421_port_start,
+	.port_start		= ata_port_start,
 };
 
 static const struct ata_port_operations vt6421_sata_ops = {
@@ -203,10 +198,10 @@ static const struct ata_port_operations vt6421_sata_ops = {
 
 	.freeze			= ata_bmdma_freeze,
 	.thaw			= ata_bmdma_thaw,
-	.error_handler		= vt6421_sata_error_handler,
+	.error_handler		= ata_bmdma_error_handler,
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
+	.cable_detect		= ata_cable_sata,
 
-	.irq_handler		= ata_interrupt,
 	.irq_clear		= ata_bmdma_irq_clear,
 	.irq_on			= ata_irq_on,
 	.irq_ack		= ata_irq_ack,
@@ -214,11 +209,10 @@ static const struct ata_port_operations vt6421_sata_ops = {
 	.scr_read		= svia_scr_read,
 	.scr_write		= svia_scr_write,
 
-	.port_start		= vt6421_port_start,
+	.port_start		= ata_port_start,
 };
 
-static struct ata_port_info vt6420_port_info = {
-	.sht		= &svia_sht,
+static const struct ata_port_info vt6420_port_info = {
 	.flags		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY,
 	.pio_mask	= 0x1f,
 	.mwdma_mask	= 0x07,
@@ -226,6 +220,22 @@ static struct ata_port_info vt6420_port_info = {
 	.port_ops	= &vt6420_sata_ops,
 };
 
+static struct ata_port_info vt6421_sport_info = {
+	.flags		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY,
+	.pio_mask	= 0x1f,
+	.mwdma_mask	= 0x07,
+	.udma_mask	= 0x7f,
+	.port_ops	= &vt6421_sata_ops,
+};
+
+static struct ata_port_info vt6421_pport_info = {
+	.flags		= ATA_FLAG_SLAVE_POSS | ATA_FLAG_NO_LEGACY,
+	.pio_mask	= 0x1f,
+	.mwdma_mask	= 0,
+	.udma_mask	= 0x7f,
+	.port_ops	= &vt6421_pata_ops,
+};
+
 MODULE_AUTHOR("Jeff Garzik");
 MODULE_DESCRIPTION("SCSI low-level driver for VIA SATA controllers");
 MODULE_LICENSE("GPL");
@@ -330,35 +340,15 @@ static void vt6420_error_handler(struct ata_port *ap)
 				  NULL, ata_std_postreset);
 }
 
-static int vt6421_pata_prereset(struct ata_port *ap)
+static int vt6421_pata_cable_detect(struct ata_port *ap)
 {
 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 	u8 tmp;
 
 	pci_read_config_byte(pdev, PATA_UDMA_TIMING, &tmp);
 	if (tmp & 0x10)
-		ap->cbl = ATA_CBL_PATA40;
-	else
-		ap->cbl = ATA_CBL_PATA80;
-	return 0;
-}
-
-static void vt6421_pata_error_handler(struct ata_port *ap)
-{
-	return ata_bmdma_drive_eh(ap, vt6421_pata_prereset, ata_std_softreset,
-				  NULL, ata_std_postreset);
-}
-
-static int vt6421_sata_prereset(struct ata_port *ap)
-{
-	ap->cbl = ATA_CBL_SATA;
-	return 0;
-}
-
-static void vt6421_sata_error_handler(struct ata_port *ap)
-{
-	return ata_bmdma_drive_eh(ap, vt6421_sata_prereset, ata_std_softreset,
-				  NULL, ata_std_postreset);
+		return ATA_CBL_PATA40;
+	return ATA_CBL_PATA80;
 }
 
 static void vt6421_set_pio_mode(struct ata_port *ap, struct ata_device *adev)
@@ -375,16 +365,6 @@ static void vt6421_set_dma_mode(struct ata_port *ap, struct ata_device *adev)
 	pci_write_config_byte(pdev, PATA_UDMA_TIMING, udma_bits[adev->pio_mode - XFER_UDMA_0]);
 }
 
-static int vt6421_port_start(struct ata_port *ap)
-{
-	if (ap->port_no == PATA_PORT) {
-		ap->ops = &vt6421_pata_ops;
-		ap->mwdma_mask = 0;
-		ap->flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_NO_LEGACY | ATA_FLAG_SRST;
-	}
-	return ata_port_start(ap);
-}
-
 static const unsigned int svia_bar_sizes[] = {
 	8, 4, 8, 4, 16, 256
 };
@@ -403,79 +383,78 @@ static void __iomem * vt6421_scr_addr(void __iomem *addr, unsigned int port)
 	return addr + (port * 64);
 }
 
-static void vt6421_init_addrs(struct ata_probe_ent *probe_ent,
-			      void __iomem * const *iomap, unsigned int port)
+static void vt6421_init_addrs(struct ata_port *ap)
 {
-	void __iomem *reg_addr = iomap[port];
-	void __iomem *bmdma_addr = iomap[4] + (port * 8);
-
-	probe_ent->port[port].cmd_addr = reg_addr;
-	probe_ent->port[port].altstatus_addr =
-	probe_ent->port[port].ctl_addr = (void __iomem *)
+	void __iomem * const * iomap = ap->host->iomap;
+	void __iomem *reg_addr = iomap[ap->port_no];
+	void __iomem *bmdma_addr = iomap[4] + (ap->port_no * 8);
+	struct ata_ioports *ioaddr = &ap->ioaddr;
+
+	ioaddr->cmd_addr = reg_addr;
+	ioaddr->altstatus_addr =
+	ioaddr->ctl_addr = (void __iomem *)
 		((unsigned long)(reg_addr + 8) | ATA_PCI_CTL_OFS);
-	probe_ent->port[port].bmdma_addr = bmdma_addr;
-	probe_ent->port[port].scr_addr = vt6421_scr_addr(iomap[5], port);
+	ioaddr->bmdma_addr = bmdma_addr;
+	ioaddr->scr_addr = vt6421_scr_addr(iomap[5], ap->port_no);
 
-	ata_std_ports(&probe_ent->port[port]);
+	ata_std_ports(ioaddr);
 }
 
-static struct ata_probe_ent *vt6420_init_probe_ent(struct pci_dev *pdev)
+static int vt6420_prepare_host(struct pci_dev *pdev, struct ata_host **r_host)
 {
-	struct ata_probe_ent *probe_ent;
-	struct ata_port_info *ppi[2];
-	void __iomem *bar5;
+	const struct ata_port_info *ppi[] = { &vt6420_port_info, NULL };
+	struct ata_host *host;
+	int rc;
 
-	ppi[0] = ppi[1] = &vt6420_port_info;
-	probe_ent = ata_pci_init_native_mode(pdev, ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY);
-	if (!probe_ent)
-		return NULL;
+	rc = ata_pci_prepare_native_host(pdev, ppi, 2, &host);
+	if (rc)
+		return rc;
+	*r_host = host;
 
-	bar5 = pcim_iomap(pdev, 5, 0);
-	if (!bar5) {
+	rc = pcim_iomap_regions(pdev, 1 << 5, DRV_NAME);
+	if (rc) {
 		dev_printk(KERN_ERR, &pdev->dev, "failed to iomap PCI BAR 5\n");
-		return NULL;
+		return rc;
 	}
 
-	probe_ent->port[0].scr_addr = svia_scr_addr(bar5, 0);
-	probe_ent->port[1].scr_addr = svia_scr_addr(bar5, 1);
+	host->ports[0]->ioaddr.scr_addr = svia_scr_addr(host->iomap[5], 0);
+	host->ports[1]->ioaddr.scr_addr = svia_scr_addr(host->iomap[5], 1);
 
-	return probe_ent;
+	return 0;
 }
 
-static struct ata_probe_ent *vt6421_init_probe_ent(struct pci_dev *pdev)
+static int vt6421_prepare_host(struct pci_dev *pdev, struct ata_host **r_host)
 {
-	struct ata_probe_ent *probe_ent;
-	unsigned int i;
+	const struct ata_port_info *ppi[] =
+		{ &vt6421_sport_info, &vt6421_sport_info, &vt6421_pport_info };
+	struct ata_host *host;
+	int i, rc;
+
+	*r_host = host = ata_host_alloc_pinfo(&pdev->dev, ppi, ARRAY_SIZE(ppi));
+	if (!host) {
+		dev_printk(KERN_ERR, &pdev->dev, "failed to allocate host\n");
+		return -ENOMEM;
+	}
 
-	probe_ent = devm_kzalloc(&pdev->dev, sizeof(*probe_ent), GFP_KERNEL);
-	if (!probe_ent)
-		return NULL;
-
-	memset(probe_ent, 0, sizeof(*probe_ent));
-	probe_ent->dev = pci_dev_to_dev(pdev);
-	INIT_LIST_HEAD(&probe_ent->node);
-
-	probe_ent->sht		= &svia_sht;
-	probe_ent->port_flags	= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY;
-	probe_ent->port_ops	= &vt6421_sata_ops;
-	probe_ent->n_ports	= N_PORTS;
-	probe_ent->irq		= pdev->irq;
-	probe_ent->irq_flags	= IRQF_SHARED;
-	probe_ent->pio_mask	= 0x1f;
-	probe_ent->mwdma_mask	= 0x07;
-	probe_ent->udma_mask	= 0x7f;
-
-	for (i = 0; i < 6; i++)
-		if (!pcim_iomap(pdev, i, 0)) {
-			dev_printk(KERN_ERR, &pdev->dev,
-				   "failed to iomap PCI BAR %d\n", i);
-			return NULL;
-		}
+	rc = pcim_iomap_regions(pdev, 0x1f, DRV_NAME);
+	if (rc) {
+		dev_printk(KERN_ERR, &pdev->dev, "failed to request/iomap "
+			   "PCI BARs (errno=%d)\n", rc);
+		return rc;
+	}
+	host->iomap = pcim_iomap_table(pdev);
 
-	for (i = 0; i < N_PORTS; i++)
-		vt6421_init_addrs(probe_ent, pcim_iomap_table(pdev), i);
+	for (i = 0; i < host->n_ports; i++)
+		vt6421_init_addrs(host->ports[i]);
 
-	return probe_ent;
+	rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
+	if (rc)
+		return rc;
+	rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
+	if (rc)
+		return rc;
+
+	return 0;
 }
 
 static void svia_configure(struct pci_dev *pdev)
@@ -522,7 +501,7 @@ static int svia_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 	static int printed_version;
 	unsigned int i;
 	int rc;
-	struct ata_probe_ent *probe_ent;
+	struct ata_host *host;
 	int board_id = (int) ent->driver_data;
 	const int *bar_sizes;
 	u8 tmp8;
@@ -534,12 +513,6 @@ static int svia_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (rc)
 		return rc;
 
-	rc = pci_request_regions(pdev, DRV_NAME);
-	if (rc) {
-		pcim_pin_device(pdev);
-		return rc;
-	}
-
 	if (board_id == vt6420) {
 		pci_read_config_byte(pdev, SATA_PATA_SHARING, &tmp8);
 		if (tmp8 & SATA_2DEV) {
@@ -565,32 +538,18 @@ static int svia_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 			return -ENODEV;
 		}
 
-	rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
-	if (rc)
-		return rc;
-	rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
-	if (rc)
-		return rc;
-
 	if (board_id == vt6420)
-		probe_ent = vt6420_init_probe_ent(pdev);
+		rc = vt6420_prepare_host(pdev, &host);
 	else
-		probe_ent = vt6421_init_probe_ent(pdev);
-
-	if (!probe_ent) {
-		dev_printk(KERN_ERR, &pdev->dev, "out of memory\n");
-		return -ENOMEM;
-	}
+		rc = vt6421_prepare_host(pdev, &host);
+	if (rc)
+		return rc;
 
 	svia_configure(pdev);
 
 	pci_set_master(pdev);
-
-	if (!ata_device_add(probe_ent))
-		return -ENODEV;
-
-	devm_kfree(&pdev->dev, probe_ent);
-	return 0;
+	return ata_host_activate(host, pdev->irq, ata_interrupt, IRQF_SHARED,
+				 &svia_sht);
 }
 
 static int __init svia_init(void)
diff --git a/drivers/ata/sata_vsc.c b/drivers/ata/sata_vsc.c
index 170bad1..80126f8 100644
--- a/drivers/ata/sata_vsc.c
+++ b/drivers/ata/sata_vsc.c
@@ -333,7 +333,6 @@ static const struct ata_port_operations vsc_sata_ops = {
 	.thaw			= vsc_thaw,
 	.error_handler		= ata_bmdma_error_handler,
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
-	.irq_handler		= vsc_sata_interrupt,
 	.irq_clear		= ata_bmdma_irq_clear,
 	.irq_on			= ata_irq_on,
 	.irq_ack		= ata_irq_ack,
@@ -367,30 +366,50 @@ static void __devinit vsc_sata_setup_port(struct ata_ioports *port,
 
 static int __devinit vsc_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 {
+	static const struct ata_port_info pi = {
+		.flags		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+				  ATA_FLAG_MMIO,
+		.pio_mask	= 0x1f,
+		.mwdma_mask	= 0x07,
+		.udma_mask	= 0x7f,
+		.port_ops	= &vsc_sata_ops,
+	};
+	const struct ata_port_info *ppi[] = { &pi, NULL };
 	static int printed_version;
-	struct ata_probe_ent *probe_ent;
+	struct ata_host *host;
 	void __iomem *mmio_base;
-	int rc;
+	int i, rc;
 	u8 cls;
 
 	if (!printed_version++)
 		dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
 
+	/* allocate host */
+	host = ata_host_alloc_pinfo(&pdev->dev, ppi, 4);
+	if (!host)
+		return -ENOMEM;
+
 	rc = pcim_enable_device(pdev);
 	if (rc)
 		return rc;
 
-	/*
-	 * Check if we have needed resource mapped.
-	 */
+	/* check if we have needed resource mapped */
 	if (pci_resource_len(pdev, 0) == 0)
 		return -ENODEV;
 
+	/* map IO regions and intialize host accordingly */
 	rc = pcim_iomap_regions(pdev, 1 << VSC_MMIO_BAR, DRV_NAME);
 	if (rc == -EBUSY)
 		pcim_pin_device(pdev);
 	if (rc)
 		return rc;
+	host->iomap = pcim_iomap_table(pdev);
+
+	mmio_base = host->iomap[VSC_MMIO_BAR];
+
+	for (i = 0; i < host->n_ports; i++)
+		vsc_sata_setup_port(&host->ports[i]->ioaddr,
+				    mmio_base + (i + 1) * VSC_SATA_PORT_OFFSET);
 
 	/*
 	 * Use 32 bit DMA mask, because 64 bit address support is poor.
@@ -402,12 +421,6 @@ static int __devinit vsc_sata_init_one (struct pci_dev *pdev, const struct pci_d
 	if (rc)
 		return rc;
 
-	probe_ent = devm_kzalloc(&pdev->dev, sizeof(*probe_ent), GFP_KERNEL);
-	if (probe_ent == NULL)
-		return -ENOMEM;
-	probe_ent->dev = pci_dev_to_dev(pdev);
-	INIT_LIST_HEAD(&probe_ent->node);
-
 	/*
 	 * Due to a bug in the chip, the default cache line size can't be
 	 * used (unless the default is non-zero).
@@ -418,33 +431,6 @@ static int __devinit vsc_sata_init_one (struct pci_dev *pdev, const struct pci_d
 
 	if (pci_enable_msi(pdev) == 0)
 		pci_intx(pdev, 0);
-	else
-		probe_ent->irq_flags = IRQF_SHARED;
-
-	probe_ent->sht = &vsc_sata_sht;
-	probe_ent->port_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
-				ATA_FLAG_MMIO;
-	probe_ent->port_ops = &vsc_sata_ops;
-	probe_ent->n_ports = 4;
-	probe_ent->irq = pdev->irq;
-	probe_ent->iomap = pcim_iomap_table(pdev);
-
-	/* We don't care much about the PIO/UDMA masks, but the core won't like us
-	 * if we don't fill these
-	 */
-	probe_ent->pio_mask = 0x1f;
-	probe_ent->mwdma_mask = 0x07;
-	probe_ent->udma_mask = 0x7f;
-
-	mmio_base = probe_ent->iomap[VSC_MMIO_BAR];
-
-	/* We have 4 ports per PCI function */
-	vsc_sata_setup_port(&probe_ent->port[0], mmio_base + 1 * VSC_SATA_PORT_OFFSET);
-	vsc_sata_setup_port(&probe_ent->port[1], mmio_base + 2 * VSC_SATA_PORT_OFFSET);
-	vsc_sata_setup_port(&probe_ent->port[2], mmio_base + 3 * VSC_SATA_PORT_OFFSET);
-	vsc_sata_setup_port(&probe_ent->port[3], mmio_base + 4 * VSC_SATA_PORT_OFFSET);
-
-	pci_set_master(pdev);
 
 	/*
 	 * Config offset 0x98 is "Extended Control and Status Register 0"
@@ -454,11 +440,9 @@ static int __devinit vsc_sata_init_one (struct pci_dev *pdev, const struct pci_d
 	 */
 	pci_write_config_dword(pdev, 0x98, 0);
 
-	if (!ata_device_add(probe_ent))
-		return -ENODEV;
-
-	devm_kfree(&pdev->dev, probe_ent);
-	return 0;
+	pci_set_master(pdev);
+	return ata_host_activate(host, pdev->irq, vsc_sata_interrupt,
+				 IRQF_SHARED, &vsc_sata_sht);
 }
 
 static const struct pci_device_id vsc_sata_pci_tbl[] = {
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 65d6f23..3411483 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -1303,119 +1303,6 @@ static void __init quirk_alder_ioapic(struct pci_dev *pdev)
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_EESSC,	quirk_alder_ioapic );
 #endif
 
-enum ide_combined_type { COMBINED = 0, IDE = 1, LIBATA = 2 };
-/* Defaults to combined */
-static enum ide_combined_type combined_mode;
-
-static int __init combined_setup(char *str)
-{
-	if (!strncmp(str, "ide", 3))
-		combined_mode = IDE;
-	else if (!strncmp(str, "libata", 6))
-		combined_mode = LIBATA;
-	else /* "combined" or anything else defaults to old behavior */
-		combined_mode = COMBINED;
-
-	return 1;
-}
-__setup("combined_mode=", combined_setup);
-
-#ifdef CONFIG_SATA_INTEL_COMBINED
-static void __devinit quirk_intel_ide_combined(struct pci_dev *pdev)
-{
-	u8 prog, comb, tmp;
-	int ich = 0;
-
-	/*
-	 * Narrow down to Intel SATA PCI devices.
-	 */
-	switch (pdev->device) {
-	/* PCI ids taken from drivers/scsi/ata_piix.c */
-	case 0x24d1:
-	case 0x24df:
-	case 0x25a3:
-	case 0x25b0:
-		ich = 5;
-		break;
-	case 0x2651:
-	case 0x2652:
-	case 0x2653:
-	case 0x2680:	/* ESB2 */
-		ich = 6;
-		break;
-	case 0x27c0:
-	case 0x27c4:
-		ich = 7;
-		break;
-	case 0x2828:	/* ICH8M */
-		ich = 8;
-		break;
-	default:
-		/* we do not handle this PCI device */
-		return;
-	}
-
-	/*
-	 * Read combined mode register.
-	 */
-	pci_read_config_byte(pdev, 0x90, &tmp);	/* combined mode reg */
-
-	if (ich == 5) {
-		tmp &= 0x6;  /* interesting bits 2:1, PATA primary/secondary */
-		if (tmp == 0x4)		/* bits 10x */
-			comb = (1 << 0);	/* SATA port 0, PATA port 1 */
-		else if (tmp == 0x6)	/* bits 11x */
-			comb = (1 << 2);	/* PATA port 0, SATA port 1 */
-		else
-			return;			/* not in combined mode */
-	} else {
-		WARN_ON((ich != 6) && (ich != 7) && (ich != 8));
-		tmp &= 0x3;  /* interesting bits 1:0 */
-		if (tmp & (1 << 0))
-			comb = (1 << 2);	/* PATA port 0, SATA port 1 */
-		else if (tmp & (1 << 1))
-			comb = (1 << 0);	/* SATA port 0, PATA port 1 */
-		else
-			return;			/* not in combined mode */
-	}
-
-	/*
-	 * Read programming interface register.
-	 * (Tells us if it's legacy or native mode)
-	 */
-	pci_read_config_byte(pdev, PCI_CLASS_PROG, &prog);
-
-	/* if SATA port is in native mode, we're ok. */
-	if (prog & comb)
-		return;
-
-	/* Don't reserve any so the IDE driver can get them (but only if
-	 * combined_mode=ide).
-	 */
-	if (combined_mode == IDE)
-		return;
-
-	/* Grab them both for libata if combined_mode=libata. */
-	if (combined_mode == LIBATA) {
-		request_region(0x1f0, 8, "libata");	/* port 0 */
-		request_region(0x170, 8, "libata");	/* port 1 */
-		return;
-	}
-
-	/* SATA port is in legacy mode.  Reserve port so that
-	 * IDE driver does not attempt to use it.  If request_region
-	 * fails, it will be obvious at boot time, so we don't bother
-	 * checking return values.
-	 */
-	if (comb == (1 << 0))
-		request_region(0x1f0, 8, "libata");	/* port 0 */
-	else
-		request_region(0x170, 8, "libata");	/* port 1 */
-}
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,    PCI_ANY_ID,	  quirk_intel_ide_combined );
-#endif /* CONFIG_SATA_INTEL_COMBINED */
-
-
 int pcie_mch_quirk;
 EXPORT_SYMBOL(pcie_mch_quirk);
 
diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c
index 95045e3..e9bd299 100644
--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -3770,7 +3770,8 @@ static int ipr_device_reset(struct ipr_ioa_cfg *ioa_cfg,
  * Return value:
  *	0 on success / non-zero on failure
  **/
-static int ipr_sata_reset(struct ata_port *ap, unsigned int *classes)
+static int ipr_sata_reset(struct ata_port *ap, unsigned int *classes,
+				unsigned long deadline)
 {
 	struct ipr_sata_port *sata_port = ap->private_data;
 	struct ipr_ioa_cfg *ioa_cfg = sata_port->ioa_cfg;