remove the v850 port

Trying to compile the v850 port brings many compile errors, one of them exists
since at least kernel 2.6.19.

There also seems to be noone willing to bring this port back into a usable
state.

This patch therefore removes the v850 port.

If anyone ever decides to revive the v850 port the code will still be
available from older kernels, and it wouldn't be impossible for the port to
reenter the kernel if it would become actively maintained again.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

1 files changed, 0 insertions, 152 deletions

diff --git a/include/asm-v850/as85ep1.h b/include/asm-v850/as85ep1.h
deleted file mode 100644
index 5a5ca90..0000000
--- a/include/asm-v850/as85ep1.h
+++ /dev/null
@@ -1,152 +0,0 @@
-/*
- * include/asm-v850/as85ep1.h -- AS85EP1 evaluation CPU chip/board
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_AS85EP1_H__
-#define __V850_AS85EP1_H__
-
-#include <asm/v850e.h>
-
-
-#define CPU_MODEL	"as85ep1"
-#define CPU_MODEL_LONG	"NEC V850E/AS85EP1"
-#define PLATFORM	"AS85EP1"
-#define PLATFORM_LONG	"NEC V850E/AS85EP1 evaluation board"
-
-#define CPU_CLOCK_FREQ	96000000 /*  96MHz */
-#define SYS_CLOCK_FREQ	CPU_CLOCK_FREQ
-
-
-/* 1MB of static RAM.  */
-#define SRAM_ADDR	0x00400000
-#define SRAM_SIZE	0x00100000 /* 1MB */
-/* About 58MB of DRAM.  This can actually be at one of two positions,
-   determined by jump JP3; we have to use the first position because the
-   second is partially out of processor instruction addressing range
-   (though in the second position there's actually 64MB available).  */
-#define SDRAM_ADDR	0x00600000
-#define SDRAM_SIZE	0x039F8000 /* approx 58MB */
-
-/* For <asm/page.h> */
-#define PAGE_OFFSET 	SRAM_ADDR
-
-/* We use on-chip RAM, for a few miscellaneous variables that must be
-   accessible using a load instruction relative to R0.  The AS85EP1 chip
-   16K of internal RAM located slightly before I/O space.  */
-#define R0_RAM_ADDR	0xFFFF8000
-
-
-/* AS85EP1 specific control registers.  */
-#define AS85EP1_CSC_ADDR(n)	(0xFFFFF060 + (n) * 2)
-#define AS85EP1_CSC(n)		(*(volatile u16 *)AS85EP1_CSC_ADDR(n))
-#define AS85EP1_BSC_ADDR	0xFFFFF066
-#define AS85EP1_BSC		(*(volatile u16 *)AS85EP1_BSC_ADDR)
-#define AS85EP1_BCT_ADDR(n)	(0xFFFFF480 + (n) * 2)
-#define AS85EP1_BCT(n)		(*(volatile u16 *)AS85EP1_BCT_ADDR(n))
-#define AS85EP1_DWC_ADDR(n)	(0xFFFFF484 + (n) * 2)
-#define AS85EP1_DWC(n)		(*(volatile u16 *)AS85EP1_DWC_ADDR(n))
-#define AS85EP1_BCC_ADDR	0xFFFFF488
-#define AS85EP1_BCC		(*(volatile u16 *)AS85EP1_BCC_ADDR)
-#define AS85EP1_ASC_ADDR	0xFFFFF48A
-#define AS85EP1_ASC		(*(volatile u16 *)AS85EP1_ASC_ADDR)
-#define AS85EP1_BCP_ADDR	0xFFFFF48C
-#define AS85EP1_BCP		(*(volatile u16 *)AS85EP1_BCP_ADDR)
-#define AS85EP1_LBS_ADDR	0xFFFFF48E
-#define AS85EP1_LBS		(*(volatile u16 *)AS85EP1_LBS_ADDR)
-#define AS85EP1_BMC_ADDR	0xFFFFF498
-#define AS85EP1_BMC		(*(volatile u16 *)AS85EP1_BMC_ADDR)
-#define AS85EP1_PRC_ADDR	0xFFFFF49A
-#define AS85EP1_PRC		(*(volatile u16 *)AS85EP1_PRC_ADDR)
-#define AS85EP1_SCR_ADDR(n)	(0xFFFFF4A0 + (n) * 4)
-#define AS85EP1_SCR(n)		(*(volatile u16 *)AS85EP1_SCR_ADDR(n))
-#define AS85EP1_RFS_ADDR(n)	(0xFFFFF4A2 + (n) * 4)
-#define AS85EP1_RFS(n)		(*(volatile u16 *)AS85EP1_RFS_ADDR(n))
-#define AS85EP1_IRAMM_ADDR	0xFFFFF80A
-#define AS85EP1_IRAMM		(*(volatile u8 *)AS85EP1_IRAMM_ADDR)
-
-
-
-/* I/O port P0-P13. */
-/* Direct I/O.  Bits 0-7 are pins Pn0-Pn7.  */
-#define AS85EP1_PORT_IO_ADDR(n)	(0xFFFFF400 + (n) * 2)
-#define AS85EP1_PORT_IO(n)	(*(volatile u8 *)AS85EP1_PORT_IO_ADDR(n))
-/* Port mode (for direct I/O, 0 = output, 1 = input).  */
-#define AS85EP1_PORT_PM_ADDR(n)	(0xFFFFF420 + (n) * 2)
-#define AS85EP1_PORT_PM(n)	(*(volatile u8 *)AS85EP1_PORT_PM_ADDR(n))
-/* Port mode control (0 = direct I/O mode, 1 = alternative I/O mode).  */
-#define AS85EP1_PORT_PMC_ADDR(n) (0xFFFFF440 + (n) * 2)
-#define AS85EP1_PORT_PMC(n)	(*(volatile u8 *)AS85EP1_PORT_PMC_ADDR(n))
-
-
-/* Hardware-specific interrupt numbers (in the kernel IRQ namespace).  */
-#define IRQ_INTCCC(n)	(0x0C + (n))
-#define IRQ_INTCCC_NUM	8
-#define IRQ_INTCMD(n)	(0x14 + (n)) /* interval timer interrupts 0-5 */
-#define IRQ_INTCMD_NUM	6
-#define IRQ_INTSRE(n)	(0x1E + (n)*3) /* UART 0-1 reception error */
-#define IRQ_INTSRE_NUM	2
-#define IRQ_INTSR(n)	(0x1F + (n)*3) /* UART 0-1 reception completion */
-#define IRQ_INTSR_NUM	2
-#define IRQ_INTST(n)	(0x20 + (n)*3) /* UART 0-1 transmission completion */
-#define IRQ_INTST_NUM	2
-
-#define NUM_CPU_IRQS	64
-
-#ifndef __ASSEMBLY__
-/* Initialize chip interrupts.  */
-extern void as85ep1_init_irqs (void);
-#endif
-
-
-/* AS85EP1 UART details (basically the same as the V850E/MA1, but 2 channels).  */
-#define V850E_UART_NUM_CHANNELS		2
-#define V850E_UART_BASE_FREQ		(SYS_CLOCK_FREQ / 4)
-#define V850E_UART_CHIP_NAME 		"V850E/NA85E"
-
-/* This is a function that gets called before configuring the UART.  */
-#define V850E_UART_PRE_CONFIGURE	as85ep1_uart_pre_configure
-#ifndef __ASSEMBLY__
-extern void as85ep1_uart_pre_configure (unsigned chan,
-					unsigned cflags, unsigned baud);
-#endif
-
-/* This board supports RTS/CTS for the on-chip UART, but only for channel 1. */
-
-/* CTS for UART channel 1 is pin P54 (bit 4 of port 5).  */
-#define V850E_UART_CTS(chan)   ((chan) == 1 ? !(AS85EP1_PORT_IO(5) & 0x10) : 1)
-/* RTS for UART channel 1 is pin P53 (bit 3 of port 5).  */
-#define V850E_UART_SET_RTS(chan, val)					      \
-   do {									      \
-	   if (chan == 1) {						      \
-		   unsigned old = AS85EP1_PORT_IO(5); 			      \
-		   if (val)						      \
-			   AS85EP1_PORT_IO(5) = old & ~0x8;		      \
-		   else							      \
-			   AS85EP1_PORT_IO(5) = old | 0x8;		      \
-	   }								      \
-   } while (0)
-
-
-/* Timer C details.  */
-#define V850E_TIMER_C_BASE_ADDR		0xFFFFF600
-
-/* Timer D details (the AS85EP1 actually has 5 of these; should change later). */
-#define V850E_TIMER_D_BASE_ADDR		0xFFFFF540
-#define V850E_TIMER_D_TMD_BASE_ADDR 	(V850E_TIMER_D_BASE_ADDR + 0x0)
-#define V850E_TIMER_D_CMD_BASE_ADDR 	(V850E_TIMER_D_BASE_ADDR + 0x2)
-#define V850E_TIMER_D_TMCD_BASE_ADDR 	(V850E_TIMER_D_BASE_ADDR + 0x4)
-
-#define V850E_TIMER_D_BASE_FREQ		SYS_CLOCK_FREQ
-#define V850E_TIMER_D_TMCD_CS_MIN	2 /* min 2^2 divider */
-
-
-#endif /* __V850_AS85EP1_H__ */