x86: fix debug message of CPU clock speed

Impact: Fixes incorrect printk

LOCAL APIC is corrected by PM-Timer, when SMI occurred while LOCAL APIC is calibrated.
In this case, LOCAL APIC debug message(Boot with apic=debug) is displayed correctly,
however, CPU clock speed debug message is displayed wrongly .

When SMI occured on my machine, which has 1.6GHz CPU, CPU clock speed is displayed
3622.0205 MHz as follow.

	CPU0: Intel(R) Xeon(R) CPU            5110  @ 1.60GHz stepping 06
	Using local APIC timer interrupts.
	calibrating APIC timer ...
	... lapic delta = 3773130
	... PM timer delta = 812434
	APIC calibration not consistent with PM Timer: 226ms instead of 100ms
	APIC delta adjusted to PM-Timer: 1662420 (3773130)
	..... delta 1662420
	..... mult: 71411249
	..... calibration result: 265987
	..... CPU clock speed is 3622.0205 MHz.  =====>  here
	..... host bus clock speed is 265.0987 MHz.

This patch fixes to displaying CPU clock speed correctly as follow.

	CPU0: Intel(R) Xeon(R) CPU            5110  @ 1.60GHz stepping 06
	Using local APIC timer interrupts.
	calibrating APIC timer ...
	... lapic delta = 3773131
	... PM timer delta = 812434
	APIC calibration not consistent with PM Timer: 226ms instead of 100ms
	APIC delta adjusted to PM-Timer: 1662420 (3773131)
	TSC delta adjusted to PM-Timer: 159592409 (362220564)
	..... delta 1662420
	..... mult: 71411249
	..... calibration result: 265987
	..... CPU clock speed is 1595.0924 MHz.
	..... host bus clock speed is 265.0987 MHz.

Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>

0 files changed, 0 insertions, 0 deletions