diff options
| -rw-r--r-- | Documentation/i2c/busses/i2c-i801 | 60 |
1 files changed, 55 insertions, 5 deletions
diff --git a/Documentation/i2c/busses/i2c-i801 b/Documentation/i2c/busses/i2c-i801 index 3db69a0..c34f0db 100644 --- a/Documentation/i2c/busses/i2c-i801 +++ b/Documentation/i2c/busses/i2c-i801 @@ -48,14 +48,9 @@ following: The SMBus controller is function 3 in device 1f. Class 0c05 is SMBus Serial Controller. -If you do NOT see the 24x3 device at function 3, and you can't figure out -any way in the BIOS to enable it, - The ICH chips are quite similar to Intel's PIIX4 chip, at least in the SMBus controller. -See the file i2c-piix4 for some additional information. - Process Call Support -------------------- @@ -74,6 +69,61 @@ SMBus 2.0 Support The 82801DB (ICH4) and later chips support several SMBus 2.0 features. + +Hidden ICH SMBus +---------------- + +If your system has an Intel ICH south bridge, but you do NOT see the +SMBus device at 00:1f.3 in lspci, and you can't figure out any way in the +BIOS to enable it, it means it has been hidden by the BIOS code. Asus is +well known for first doing this on their P4B motherboard, and many other +boards after that. Some vendor machines are affected as well. + +The first thing to try is the "i2c_ec" ACPI driver. It could be that the +SMBus was hidden on purpose because it'll be driven by ACPI. If the +i2c_ec driver works for you, just forget about the i2c-i801 driver and +don't try to unhide the ICH SMBus. Even if i2c_ec doesn't work, you +better make sure that the SMBus isn't used by the ACPI code. Try loading +the "fan" and "thermal" drivers, and check in /proc/acpi/fan and +/proc/acpi/thermal_zone. If you find anything there, it's likely that +the ACPI is accessing the SMBus and it's safer not to unhide it. Only +once you are certain that ACPI isn't using the SMBus, you can attempt +to unhide it. + +In order to unhide the SMBus, we need to change the value of a PCI +register before the kernel enumerates the PCI devices. This is done in +drivers/pci/quirks.c, where all affected boards must be listed (see +function asus_hides_smbus_hostbridge.) If the SMBus device is missing, +and you think there's something interesting on the SMBus (e.g. a +hardware monitoring chip), you need to add your board to the list. + +The motherboard is identified using the subvendor and subdevice IDs of the +host bridge PCI device. Get yours with "lspci -n -v -s 00:00.0": + +00:00.0 Class 0600: 8086:2570 (rev 02) + Subsystem: 1043:80f2 + Flags: bus master, fast devsel, latency 0 + Memory at fc000000 (32-bit, prefetchable) [size=32M] + Capabilities: [e4] #09 [2106] + Capabilities: [a0] AGP version 3.0 + +Here the host bridge ID is 2570 (82865G/PE/P), the subvendor ID is 1043 +(Asus) and the subdevice ID is 80f2 (P4P800-X). You can find the symbolic +names for the bridge ID and the subvendor ID in include/linux/pci_ids.h, +and then add a case for your subdevice ID at the right place in +drivers/pci/quirks.c. Then please give it very good testing, to make sure +that the unhidden SMBus doesn't conflict with e.g. ACPI. + +If it works, proves useful (i.e. there are usable chips on the SMBus) +and seems safe, please submit a patch for inclusion into the kernel. + +Note: There's a useful script in lm_sensors 2.10.2 and later, named +unhide_ICH_SMBus (in prog/hotplug), which uses the fakephp driver to +temporarily unhide the SMBus without having to patch and recompile your +kernel. It's very convenient if you just want to check if there's +anything interesting on your hidden ICH SMBus. + + ********************** The lm_sensors project gratefully acknowledges the support of Texas Instruments in the initial development of this driver. |