diff options
-rw-r--r-- | drivers/dma/amba-pl08x.c | 28 | ||||
-rw-r--r-- | include/linux/amba/pl08x.h | 6 |
2 files changed, 17 insertions, 17 deletions
diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index a1a18bd..75f9e2d 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -194,15 +194,11 @@ static void pl08x_start_txd(struct pl08x_dma_chan *plchan, struct pl08x_driver_data *pl08x = plchan->host; struct pl08x_phy_chan *phychan = plchan->phychan; struct pl08x_lli *lli = &txd->llis_va[0]; - u32 val, ccfg; + u32 val, ccfg = txd->ccfg; plchan->at = txd; - /* Assign the signal to the proper control registers */ - ccfg = plchan->cd->ccfg; - ccfg &= ~(PL080_CONFIG_SRC_SEL_MASK | PL080_CONFIG_DST_SEL_MASK); - - /* If it wasn't set from AMBA, ignore it */ + /* Assign the flow control signal to this channel */ if (txd->direction == DMA_TO_DEVICE) /* Select signal as destination */ ccfg |= phychan->signal << PL080_CONFIG_DST_SEL_SHIFT; @@ -210,9 +206,6 @@ static void pl08x_start_txd(struct pl08x_dma_chan *plchan, /* Select signal as source */ ccfg |= phychan->signal << PL080_CONFIG_SRC_SEL_SHIFT; - /* Always enable error and terminal interrupts */ - ccfg |= PL080_CONFIG_ERR_IRQ_MASK | PL080_CONFIG_TC_IRQ_MASK; - /* Wait for channel inactive */ while (pl08x_phy_channel_busy(phychan)) cpu_relax(); @@ -1161,8 +1154,6 @@ static void dma_set_runtime_config(struct dma_chan *chan, enum dma_slave_buswidth addr_width; u32 maxburst; u32 cctl = 0; - /* Mask out all except src and dst channel */ - u32 ccfg = cd->ccfg & 0x000003DEU; int i; /* Transfer direction */ @@ -1170,13 +1161,11 @@ static void dma_set_runtime_config(struct dma_chan *chan, if (config->direction == DMA_TO_DEVICE) { plchan->runtime_addr = config->dst_addr; cctl |= PL080_CONTROL_SRC_INCR; - ccfg |= PL080_FLOW_MEM2PER << PL080_CONFIG_FLOW_CONTROL_SHIFT; addr_width = config->dst_addr_width; maxburst = config->dst_maxburst; } else if (config->direction == DMA_FROM_DEVICE) { plchan->runtime_addr = config->src_addr; cctl |= PL080_CONTROL_DST_INCR; - ccfg |= PL080_FLOW_PER2MEM << PL080_CONFIG_FLOW_CONTROL_SHIFT; addr_width = config->src_addr_width; maxburst = config->src_maxburst; } else { @@ -1226,16 +1215,15 @@ static void dma_set_runtime_config(struct dma_chan *chan, /* Modify the default channel data to fit PrimeCell request */ cd->cctl = cctl; - cd->ccfg = ccfg; dev_dbg(&pl08x->adev->dev, "configured channel %s (%s) for %s, data width %d, " - "maxburst %d words, LE, CCTL=0x%08x, CCFG=0x%08x\n", + "maxburst %d words, LE, CCTL=0x%08x\n", dma_chan_name(chan), plchan->name, (config->direction == DMA_FROM_DEVICE) ? "RX" : "TX", addr_width, maxburst, - cctl, ccfg); + cctl); } /* @@ -1340,6 +1328,10 @@ static struct pl08x_txd *pl08x_get_txd(struct pl08x_dma_chan *plchan) dma_async_tx_descriptor_init(&txd->tx, &plchan->chan); txd->tx.tx_submit = pl08x_tx_submit; INIT_LIST_HEAD(&txd->node); + + /* Always enable error and terminal interrupts */ + txd->ccfg = PL080_CONFIG_ERR_IRQ_MASK | + PL080_CONFIG_TC_IRQ_MASK; } return txd; } @@ -1369,6 +1361,8 @@ static struct dma_async_tx_descriptor *pl08x_prep_dma_memcpy( /* Set platform data for m2m */ txd->cd = &pl08x->pd->memcpy_channel; + txd->ccfg |= PL080_FLOW_MEM2MEM << PL080_CONFIG_FLOW_CONTROL_SHIFT; + /* Both to be incremented or the code will break */ txd->cd->cctl |= PL080_CONTROL_SRC_INCR | PL080_CONTROL_DST_INCR; txd->len = len; @@ -1424,12 +1418,14 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg( */ txd->direction = direction; if (direction == DMA_TO_DEVICE) { + txd->ccfg |= PL080_FLOW_MEM2PER << PL080_CONFIG_FLOW_CONTROL_SHIFT; txd->srcbus.addr = sgl->dma_address; if (plchan->runtime_addr) txd->dstbus.addr = plchan->runtime_addr; else txd->dstbus.addr = plchan->cd->addr; } else if (direction == DMA_FROM_DEVICE) { + txd->ccfg |= PL080_FLOW_PER2MEM << PL080_CONFIG_FLOW_CONTROL_SHIFT; if (plchan->runtime_addr) txd->srcbus.addr = plchan->runtime_addr; else diff --git a/include/linux/amba/pl08x.h b/include/linux/amba/pl08x.h index 29d9745..8e74cb1 100644 --- a/include/linux/amba/pl08x.h +++ b/include/linux/amba/pl08x.h @@ -58,7 +58,6 @@ struct pl08x_channel_data { int max_signal; u32 muxval; u32 cctl; - u32 ccfg; dma_addr_t addr; bool circular_buffer; bool single; @@ -113,6 +112,11 @@ struct pl08x_txd { void *llis_va; struct pl08x_channel_data *cd; bool active; + /* + * Settings to be put into the physical channel when we + * trigger this txd. Other registers are in llis_va[0]. + */ + u32 ccfg; }; /** |