aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--Documentation/hwmon/adm92402
-rw-r--r--Documentation/hwmon/f71805f2
-rw-r--r--Documentation/hwmon/k8temp13
-rw-r--r--Documentation/hwmon/smsc47m14
-rw-r--r--Documentation/hwmon/w83627ehf6
-rw-r--r--MAINTAINERS6
-rw-r--r--drivers/hwmon/Kconfig10
-rw-r--r--drivers/hwmon/adm9240.c4
-rw-r--r--drivers/hwmon/lm78.c12
-rw-r--r--drivers/hwmon/smsc47m1.c11
-rw-r--r--drivers/hwmon/w83627ehf.c11
-rw-r--r--drivers/hwmon/w83781d.c30
-rw-r--r--drivers/hwmon/w83791d.c85
-rw-r--r--drivers/i2c/busses/i2c-isa.c2
14 files changed, 124 insertions, 74 deletions
diff --git a/Documentation/hwmon/adm9240 b/Documentation/hwmon/adm9240
index 35f618f..2c6f1fe 100644
--- a/Documentation/hwmon/adm9240
+++ b/Documentation/hwmon/adm9240
@@ -24,7 +24,7 @@ Authors:
Frodo Looijaard <frodol@dds.nl>,
Philip Edelbrock <phil@netroedge.com>,
Michiel Rook <michiel@grendelproject.nl>,
- Grant Coady <gcoady@gmail.com> with guidance
+ Grant Coady <gcoady.lk@gmail.com> with guidance
from Jean Delvare <khali@linux-fr.org>
Interface
diff --git a/Documentation/hwmon/f71805f b/Documentation/hwmon/f71805f
index 28c5b7d..2ca69df 100644
--- a/Documentation/hwmon/f71805f
+++ b/Documentation/hwmon/f71805f
@@ -17,7 +17,7 @@ Thanks to Kris Chen from Fintek for answering technical questions and
providing additional documentation.
Thanks to Chris Lin from Jetway for providing wiring schematics and
-anwsering technical questions.
+answering technical questions.
Description
diff --git a/Documentation/hwmon/k8temp b/Documentation/hwmon/k8temp
index bab445a..30d123b 100644
--- a/Documentation/hwmon/k8temp
+++ b/Documentation/hwmon/k8temp
@@ -2,7 +2,7 @@ Kernel driver k8temp
====================
Supported chips:
- * AMD K8 CPU
+ * AMD Athlon64/FX or Opteron CPUs
Prefix: 'k8temp'
Addresses scanned: PCI space
Datasheet: http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/32559.pdf
@@ -13,10 +13,13 @@ Contact: Rudolf Marek <r.marek@sh.cvut.cz>
Description
-----------
-This driver permits reading temperature sensor(s) embedded inside AMD K8 CPUs.
-Official documentation says that it works from revision F of K8 core, but
-in fact it seems to be implemented for all revisions of K8 except the first
-two revisions (SH-B0 and SH-B3).
+This driver permits reading temperature sensor(s) embedded inside AMD K8
+family CPUs (Athlon64/FX, Opteron). Official documentation says that it works
+from revision F of K8 core, but in fact it seems to be implemented for all
+revisions of K8 except the first two revisions (SH-B0 and SH-B3).
+
+Please note that you will need at least lm-sensors 2.10.1 for proper userspace
+support.
There can be up to four temperature sensors inside single CPU. The driver
will auto-detect the sensors and will display only temperatures from
diff --git a/Documentation/hwmon/smsc47m1 b/Documentation/hwmon/smsc47m1
index c15bbe6..04a1112 100644
--- a/Documentation/hwmon/smsc47m1
+++ b/Documentation/hwmon/smsc47m1
@@ -2,12 +2,14 @@ Kernel driver smsc47m1
======================
Supported chips:
- * SMSC LPC47B27x, LPC47M10x, LPC47M13x, LPC47M14x, LPC47M15x and LPC47M192
+ * SMSC LPC47B27x, LPC47M112, LPC47M10x, LPC47M13x, LPC47M14x,
+ LPC47M15x and LPC47M192
Addresses scanned: none, address read from Super I/O config space
Prefix: 'smsc47m1'
Datasheets:
http://www.smsc.com/main/datasheets/47b27x.pdf
http://www.smsc.com/main/datasheets/47m10x.pdf
+ http://www.smsc.com/main/datasheets/47m112.pdf
http://www.smsc.com/main/tools/discontinued/47m13x.pdf
http://www.smsc.com/main/datasheets/47m14x.pdf
http://www.smsc.com/main/tools/discontinued/47m15x.pdf
diff --git a/Documentation/hwmon/w83627ehf b/Documentation/hwmon/w83627ehf
index fae3b78..caa610a 100644
--- a/Documentation/hwmon/w83627ehf
+++ b/Documentation/hwmon/w83627ehf
@@ -26,7 +26,7 @@ fan control mode).
Temperatures are measured in degrees Celsius and measurement resolution is 1
degC for temp1 and 0.5 degC for temp2 and temp3. An alarm is triggered when
the temperature gets higher than high limit; it stays on until the temperature
-falls below the Hysteresis value.
+falls below the hysteresis value.
Fan rotation speeds are reported in RPM (rotations per minute). An alarm is
triggered if the rotation speed has dropped below a programmable limit. Fan
@@ -67,9 +67,9 @@ Thermal Cruise mode
If the temperature is in the range defined by:
-pwm[1-4]_target - set target temperature, unit millidegree Celcius
+pwm[1-4]_target - set target temperature, unit millidegree Celsius
(range 0 - 127000)
-pwm[1-4]_tolerance - tolerance, unit millidegree Celcius (range 0 - 15000)
+pwm[1-4]_tolerance - tolerance, unit millidegree Celsius (range 0 - 15000)
there are no changes to fan speed. Once the temperature leaves the interval,
fan speed increases (temp is higher) or decreases if lower than desired.
diff --git a/MAINTAINERS b/MAINTAINERS
index 9b6b882..d708702 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1668,6 +1668,12 @@ M: sct@redhat.com, akpm@osdl.org
L: ext2-devel@lists.sourceforge.net
S: Maintained
+K8TEMP HARDWARE MONITORING DRIVER
+P: Rudolf Marek
+M: r.marek@assembler.cz
+L: lm-sensors@lm-sensors.org
+S: Maintained
+
KCONFIG
P: Roman Zippel
M: zippel@linux-m68k.org
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 9b88b25..e76d919 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -95,11 +95,13 @@ config SENSORS_ADM9240
will be called adm9240.
config SENSORS_K8TEMP
- tristate "AMD K8 processor sensor"
+ tristate "AMD Athlon64/FX or Opteron temperature sensor"
depends on HWMON && X86 && PCI && EXPERIMENTAL
help
If you say yes here you get support for the temperature
- sensor(s) inside your AMD K8 CPU.
+ sensor(s) inside your CPU. Supported is whole AMD K8
+ microarchitecture. Please note that you will need at least
+ lm-sensors 2.10.1 for proper userspace support.
This driver can also be built as a module. If so, the module
will be called k8temp.
@@ -369,8 +371,8 @@ config SENSORS_SMSC47M1
help
If you say yes here you get support for the integrated fan
monitoring and control capabilities of the SMSC LPC47B27x,
- LPC47M10x, LPC47M13x, LPC47M14x, LPC47M15x, LPC47M192 and
- LPC47M997 chips.
+ LPC47M10x, LPC47M112, LPC47M13x, LPC47M14x, LPC47M15x,
+ LPC47M192 and LPC47M997 chips.
The temperature and voltage sensor features of the LPC47M192
and LPC47M997 are supported by another driver, select also
diff --git a/drivers/hwmon/adm9240.c b/drivers/hwmon/adm9240.c
index 377961c..aad594a 100644
--- a/drivers/hwmon/adm9240.c
+++ b/drivers/hwmon/adm9240.c
@@ -5,7 +5,7 @@
* Copyright (C) 1999 Frodo Looijaard <frodol@dds.nl>
* Philip Edelbrock <phil@netroedge.com>
* Copyright (C) 2003 Michiel Rook <michiel@grendelproject.nl>
- * Copyright (C) 2005 Grant Coady <gcoady@gmail.com> with valuable
+ * Copyright (C) 2005 Grant Coady <gcoady.lk@gmail.com> with valuable
* guidance from Jean Delvare
*
* Driver supports Analog Devices ADM9240
@@ -774,7 +774,7 @@ static void __exit sensors_adm9240_exit(void)
}
MODULE_AUTHOR("Michiel Rook <michiel@grendelproject.nl>, "
- "Grant Coady <gcoady@gmail.com> and others");
+ "Grant Coady <gcoady.lk@gmail.com> and others");
MODULE_DESCRIPTION("ADM9240/DS1780/LM81 driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/hwmon/lm78.c b/drivers/hwmon/lm78.c
index ac1b746..73bc2ff 100644
--- a/drivers/hwmon/lm78.c
+++ b/drivers/hwmon/lm78.c
@@ -815,18 +815,18 @@ static int __init sm_lm78_init(void)
if (res)
return res;
- res = i2c_isa_add_driver(&lm78_isa_driver);
- if (res) {
- i2c_del_driver(&lm78_driver);
- return res;
- }
+ /* Don't exit if this one fails, we still want the I2C variants
+ to work! */
+ if (i2c_isa_add_driver(&lm78_isa_driver))
+ isa_address = 0;
return 0;
}
static void __exit sm_lm78_exit(void)
{
- i2c_isa_del_driver(&lm78_isa_driver);
+ if (isa_address)
+ i2c_isa_del_driver(&lm78_isa_driver);
i2c_del_driver(&lm78_driver);
}
diff --git a/drivers/hwmon/smsc47m1.c b/drivers/hwmon/smsc47m1.c
index 47132fd..beb881c 100644
--- a/drivers/hwmon/smsc47m1.c
+++ b/drivers/hwmon/smsc47m1.c
@@ -2,8 +2,8 @@
smsc47m1.c - Part of lm_sensors, Linux kernel modules
for hardware monitoring
- Supports the SMSC LPC47B27x, LPC47M10x, LPC47M13x, LPC47M14x,
- LPC47M15x, LPC47M192 and LPC47M997 Super-I/O chips.
+ Supports the SMSC LPC47B27x, LPC47M10x, LPC47M112, LPC47M13x,
+ LPC47M14x, LPC47M15x, LPC47M192 and LPC47M997 Super-I/O chips.
Copyright (C) 2002 Mark D. Studebaker <mdsxyz123@yahoo.com>
Copyright (C) 2004 Jean Delvare <khali@linux-fr.org>
@@ -380,8 +380,8 @@ static int __init smsc47m1_find(unsigned short *addr)
val = superio_inb(SUPERIO_REG_DEVID);
/*
- * SMSC LPC47M10x/LPC47M13x (device id 0x59), LPC47M14x (device id
- * 0x5F) and LPC47B27x (device id 0x51) have fan control.
+ * SMSC LPC47M10x/LPC47M112/LPC47M13x (device id 0x59), LPC47M14x
+ * (device id 0x5F) and LPC47B27x (device id 0x51) have fan control.
* The LPC47M15x and LPC47M192 chips "with hardware monitoring block"
* can do much more besides (device id 0x60).
* The LPC47M997 is undocumented, but seems to be compatible with
@@ -390,7 +390,8 @@ static int __init smsc47m1_find(unsigned short *addr)
if (val == 0x51)
printk(KERN_INFO "smsc47m1: Found SMSC LPC47B27x\n");
else if (val == 0x59)
- printk(KERN_INFO "smsc47m1: Found SMSC LPC47M10x/LPC47M13x\n");
+ printk(KERN_INFO "smsc47m1: Found SMSC "
+ "LPC47M10x/LPC47M112/LPC47M13x\n");
else if (val == 0x5F)
printk(KERN_INFO "smsc47m1: Found SMSC LPC47M14x\n");
else if (val == 0x60)
diff --git a/drivers/hwmon/w83627ehf.c b/drivers/hwmon/w83627ehf.c
index 833faa2..2257806 100644
--- a/drivers/hwmon/w83627ehf.c
+++ b/drivers/hwmon/w83627ehf.c
@@ -354,6 +354,8 @@ static void w83627ehf_write_fan_div(struct i2c_client *client, int nr)
case 0:
reg = (w83627ehf_read_value(client, W83627EHF_REG_FANDIV1) & 0xcf)
| ((data->fan_div[0] & 0x03) << 4);
+ /* fan5 input control bit is write only, compute the value */
+ reg |= (data->has_fan & (1 << 4)) ? 1 : 0;
w83627ehf_write_value(client, W83627EHF_REG_FANDIV1, reg);
reg = (w83627ehf_read_value(client, W83627EHF_REG_VBAT) & 0xdf)
| ((data->fan_div[0] & 0x04) << 3);
@@ -362,6 +364,8 @@ static void w83627ehf_write_fan_div(struct i2c_client *client, int nr)
case 1:
reg = (w83627ehf_read_value(client, W83627EHF_REG_FANDIV1) & 0x3f)
| ((data->fan_div[1] & 0x03) << 6);
+ /* fan5 input control bit is write only, compute the value */
+ reg |= (data->has_fan & (1 << 4)) ? 1 : 0;
w83627ehf_write_value(client, W83627EHF_REG_FANDIV1, reg);
reg = (w83627ehf_read_value(client, W83627EHF_REG_VBAT) & 0xbf)
| ((data->fan_div[1] & 0x04) << 4);
@@ -1216,13 +1220,16 @@ static int w83627ehf_detect(struct i2c_adapter *adapter)
superio_exit();
/* It looks like fan4 and fan5 pins can be alternatively used
- as fan on/off switches */
+ as fan on/off switches, but fan5 control is write only :/
+ We assume that if the serial interface is disabled, designers
+ connected fan5 as input unless they are emitting log 1, which
+ is not the default. */
data->has_fan = 0x07; /* fan1, fan2 and fan3 */
i = w83627ehf_read_value(client, W83627EHF_REG_FANDIV1);
if ((i & (1 << 2)) && (!fan4pin))
data->has_fan |= (1 << 3);
- if ((i & (1 << 0)) && (!fan5pin))
+ if (!(i & (1 << 1)) && (!fan5pin))
data->has_fan |= (1 << 4);
/* Register sysfs hooks */
diff --git a/drivers/hwmon/w83781d.c b/drivers/hwmon/w83781d.c
index a4584ec..1232171 100644
--- a/drivers/hwmon/w83781d.c
+++ b/drivers/hwmon/w83781d.c
@@ -1099,7 +1099,8 @@ w83781d_detect(struct i2c_adapter *adapter, int address, int kind)
bank. */
if (kind < 0) {
if (w83781d_read_value(client, W83781D_REG_CONFIG) & 0x80) {
- dev_dbg(dev, "Detection failed at step 3\n");
+ dev_dbg(&adapter->dev, "Detection of w83781d chip "
+ "failed at step 3\n");
err = -ENODEV;
goto ERROR2;
}
@@ -1109,7 +1110,8 @@ w83781d_detect(struct i2c_adapter *adapter, int address, int kind)
if ((!(val1 & 0x07)) &&
(((!(val1 & 0x80)) && (val2 != 0xa3) && (val2 != 0xc3))
|| ((val1 & 0x80) && (val2 != 0x5c) && (val2 != 0x12)))) {
- dev_dbg(dev, "Detection failed at step 4\n");
+ dev_dbg(&adapter->dev, "Detection of w83781d chip "
+ "failed at step 4\n");
err = -ENODEV;
goto ERROR2;
}
@@ -1119,7 +1121,8 @@ w83781d_detect(struct i2c_adapter *adapter, int address, int kind)
((val1 & 0x80) && (val2 == 0x5c)))) {
if (w83781d_read_value
(client, W83781D_REG_I2C_ADDR) != address) {
- dev_dbg(dev, "Detection failed at step 5\n");
+ dev_dbg(&adapter->dev, "Detection of w83781d "
+ "chip failed at step 5\n");
err = -ENODEV;
goto ERROR2;
}
@@ -1141,8 +1144,8 @@ w83781d_detect(struct i2c_adapter *adapter, int address, int kind)
else if (val2 == 0x12)
vendid = asus;
else {
- dev_dbg(dev, "Chip was made by neither "
- "Winbond nor Asus?\n");
+ dev_dbg(&adapter->dev, "w83781d chip vendor is "
+ "neither Winbond nor Asus\n");
err = -ENODEV;
goto ERROR2;
}
@@ -1161,10 +1164,9 @@ w83781d_detect(struct i2c_adapter *adapter, int address, int kind)
kind = as99127f;
else {
if (kind == 0)
- dev_warn(dev, "Ignoring 'force' "
+ dev_warn(&adapter->dev, "Ignoring 'force' "
"parameter for unknown chip at "
- "adapter %d, address 0x%02x\n",
- i2c_adapter_id(adapter), address);
+ "address 0x%02x\n", address);
err = -EINVAL;
goto ERROR2;
}
@@ -1685,11 +1687,10 @@ sensors_w83781d_init(void)
if (res)
return res;
- res = i2c_isa_add_driver(&w83781d_isa_driver);
- if (res) {
- i2c_del_driver(&w83781d_driver);
- return res;
- }
+ /* Don't exit if this one fails, we still want the I2C variants
+ to work! */
+ if (i2c_isa_add_driver(&w83781d_isa_driver))
+ isa_address = 0;
return 0;
}
@@ -1697,7 +1698,8 @@ sensors_w83781d_init(void)
static void __exit
sensors_w83781d_exit(void)
{
- i2c_isa_del_driver(&w83781d_isa_driver);
+ if (isa_address)
+ i2c_isa_del_driver(&w83781d_isa_driver);
i2c_del_driver(&w83781d_driver);
}
diff --git a/drivers/hwmon/w83791d.c b/drivers/hwmon/w83791d.c
index 371ed4f..9e5f885 100644
--- a/drivers/hwmon/w83791d.c
+++ b/drivers/hwmon/w83791d.c
@@ -746,6 +746,52 @@ static ssize_t store_vrm_reg(struct device *dev,
static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm_reg, store_vrm_reg);
+#define IN_UNIT_ATTRS(X) \
+ &sda_in_input[X].dev_attr.attr, \
+ &sda_in_min[X].dev_attr.attr, \
+ &sda_in_max[X].dev_attr.attr
+
+#define FAN_UNIT_ATTRS(X) \
+ &sda_fan_input[X].dev_attr.attr, \
+ &sda_fan_min[X].dev_attr.attr, \
+ &sda_fan_div[X].dev_attr.attr
+
+#define TEMP_UNIT_ATTRS(X) \
+ &sda_temp_input[X].dev_attr.attr, \
+ &sda_temp_max[X].dev_attr.attr, \
+ &sda_temp_max_hyst[X].dev_attr.attr
+
+static struct attribute *w83791d_attributes[] = {
+ IN_UNIT_ATTRS(0),
+ IN_UNIT_ATTRS(1),
+ IN_UNIT_ATTRS(2),
+ IN_UNIT_ATTRS(3),
+ IN_UNIT_ATTRS(4),
+ IN_UNIT_ATTRS(5),
+ IN_UNIT_ATTRS(6),
+ IN_UNIT_ATTRS(7),
+ IN_UNIT_ATTRS(8),
+ IN_UNIT_ATTRS(9),
+ FAN_UNIT_ATTRS(0),
+ FAN_UNIT_ATTRS(1),
+ FAN_UNIT_ATTRS(2),
+ FAN_UNIT_ATTRS(3),
+ FAN_UNIT_ATTRS(4),
+ TEMP_UNIT_ATTRS(0),
+ TEMP_UNIT_ATTRS(1),
+ TEMP_UNIT_ATTRS(2),
+ &dev_attr_alarms.attr,
+ &sda_beep_ctrl[0].dev_attr.attr,
+ &sda_beep_ctrl[1].dev_attr.attr,
+ &dev_attr_cpu0_vid.attr,
+ &dev_attr_vrm.attr,
+ NULL
+};
+
+static const struct attribute_group w83791d_group = {
+ .attrs = w83791d_attributes,
+};
+
/* This function is called when:
* w83791d_driver is inserted (when this module is loaded), for each
available adapter
@@ -967,41 +1013,20 @@ static int w83791d_detect(struct i2c_adapter *adapter, int address, int kind)
}
/* Register sysfs hooks */
+ if ((err = sysfs_create_group(&client->dev.kobj, &w83791d_group)))
+ goto error3;
+
+ /* Everything is ready, now register the working device */
data->class_dev = hwmon_device_register(dev);
if (IS_ERR(data->class_dev)) {
err = PTR_ERR(data->class_dev);
- goto error3;
+ goto error4;
}
- for (i = 0; i < NUMBER_OF_VIN; i++) {
- device_create_file(dev, &sda_in_input[i].dev_attr);
- device_create_file(dev, &sda_in_min[i].dev_attr);
- device_create_file(dev, &sda_in_max[i].dev_attr);
- }
-
- for (i = 0; i < NUMBER_OF_FANIN; i++) {
- device_create_file(dev, &sda_fan_input[i].dev_attr);
- device_create_file(dev, &sda_fan_div[i].dev_attr);
- device_create_file(dev, &sda_fan_min[i].dev_attr);
- }
-
- for (i = 0; i < NUMBER_OF_TEMPIN; i++) {
- device_create_file(dev, &sda_temp_input[i].dev_attr);
- device_create_file(dev, &sda_temp_max[i].dev_attr);
- device_create_file(dev, &sda_temp_max_hyst[i].dev_attr);
- }
-
- device_create_file(dev, &dev_attr_alarms);
-
- for (i = 0; i < ARRAY_SIZE(sda_beep_ctrl); i++) {
- device_create_file(dev, &sda_beep_ctrl[i].dev_attr);
- }
-
- device_create_file(dev, &dev_attr_cpu0_vid);
- device_create_file(dev, &dev_attr_vrm);
-
return 0;
+error4:
+ sysfs_remove_group(&client->dev.kobj, &w83791d_group);
error3:
if (data->lm75[0] != NULL) {
i2c_detach_client(data->lm75[0]);
@@ -1025,8 +1050,10 @@ static int w83791d_detach_client(struct i2c_client *client)
int err;
/* main client */
- if (data)
+ if (data) {
hwmon_device_unregister(data->class_dev);
+ sysfs_remove_group(&client->dev.kobj, &w83791d_group);
+ }
if ((err = i2c_detach_client(client)))
return err;
diff --git a/drivers/i2c/busses/i2c-isa.c b/drivers/i2c/busses/i2c-isa.c
index 4380653..8ed59a2 100644
--- a/drivers/i2c/busses/i2c-isa.c
+++ b/drivers/i2c/busses/i2c-isa.c
@@ -91,7 +91,7 @@ int i2c_isa_add_driver(struct i2c_driver *driver)
/* Now look for clients */
res = driver->attach_adapter(&isa_adapter);
if (res) {
- dev_err(&isa_adapter.dev,
+ dev_dbg(&isa_adapter.dev,
"Driver %s failed to attach adapter, unregistering\n",
driver->driver.name);
driver_unregister(&driver->driver);
generated by cgit v1.1 at 2024-12-27 10:24:29 +0000