diff options
28 files changed, 92 insertions, 96 deletions
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 69a6b2b..317b8cb 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -11,14 +11,9 @@ config ARCH_OMAP2430 bool "OMAP2430 support" depends on ARCH_OMAP2 -config ARCH_OMAP34XX - bool "OMAP34xx Based System" - depends on ARCH_OMAP3 - select USB_ARCH_HAS_EHCI - config ARCH_OMAP3430 bool "OMAP3430 support" - depends on ARCH_OMAP3 && ARCH_OMAP34XX + depends on ARCH_OMAP3 select ARCH_OMAP_OTG config OMAP_PACKAGE_CBC @@ -60,42 +55,42 @@ config MACH_OMAP_2430SDP config MACH_OMAP3_BEAGLE bool "OMAP3 BEAGLE board" - depends on ARCH_OMAP3 && ARCH_OMAP34XX + depends on ARCH_OMAP3 select OMAP_PACKAGE_CBB config MACH_OMAP_LDP bool "OMAP3 LDP board" - depends on ARCH_OMAP3 && ARCH_OMAP34XX + depends on ARCH_OMAP3 select OMAP_PACKAGE_CBB config MACH_OVERO bool "Gumstix Overo board" - depends on ARCH_OMAP3 && ARCH_OMAP34XX + depends on ARCH_OMAP3 select OMAP_PACKAGE_CBB config MACH_OMAP3EVM bool "OMAP 3530 EVM board" - depends on ARCH_OMAP3 && ARCH_OMAP34XX + depends on ARCH_OMAP3 select OMAP_PACKAGE_CBB config MACH_OMAP3517EVM bool "OMAP3517/ AM3517 EVM board" - depends on ARCH_OMAP3 && ARCH_OMAP34XX + depends on ARCH_OMAP3 select OMAP_PACKAGE_CBB config MACH_OMAP3_PANDORA bool "OMAP3 Pandora" - depends on ARCH_OMAP3 && ARCH_OMAP34XX + depends on ARCH_OMAP3 select OMAP_PACKAGE_CBB config MACH_OMAP3_TOUCHBOOK bool "OMAP3 Touch Book" - depends on ARCH_OMAP3 && ARCH_OMAP34XX + depends on ARCH_OMAP3 select BACKLIGHT_CLASS_DEVICE config MACH_OMAP_3430SDP bool "OMAP 3430 SDP board" - depends on ARCH_OMAP3 && ARCH_OMAP34XX + depends on ARCH_OMAP3 select OMAP_PACKAGE_CBB config MACH_NOKIA_N800 @@ -116,33 +111,33 @@ config MACH_NOKIA_N8X0 config MACH_NOKIA_RX51 bool "Nokia RX-51 board" - depends on ARCH_OMAP3 && ARCH_OMAP34XX + depends on ARCH_OMAP3 select OMAP_PACKAGE_CBB config MACH_OMAP_ZOOM2 bool "OMAP3 Zoom2 board" - depends on ARCH_OMAP3 && ARCH_OMAP34XX + depends on ARCH_OMAP3 select OMAP_PACKAGE_CBB config MACH_OMAP_ZOOM3 bool "OMAP3630 Zoom3 board" - depends on ARCH_OMAP3 && ARCH_OMAP34XX + depends on ARCH_OMAP3 select OMAP_PACKAGE_CBP config MACH_CM_T35 bool "CompuLab CM-T35 module" - depends on ARCH_OMAP3 && ARCH_OMAP34XX + depends on ARCH_OMAP3 select OMAP_PACKAGE_CUS select OMAP_MUX config MACH_IGEP0020 bool "IGEP0020" - depends on ARCH_OMAP3 && ARCH_OMAP34XX + depends on ARCH_OMAP3 select OMAP_PACKAGE_CBB config MACH_OMAP_3630SDP bool "OMAP3630 SDP board" - depends on ARCH_OMAP3 && ARCH_OMAP34XX + depends on ARCH_OMAP3 select OMAP_PACKAGE_CBP config MACH_OMAP_4430SDP @@ -158,7 +153,7 @@ config OMAP3_EMU config OMAP3_SDRC_AC_TIMING bool "Enable SDRC AC timing register changes" - depends on ARCH_OMAP3 && ARCH_OMAP34XX + depends on ARCH_OMAP3 default n help If you know that none of your system initiators will attempt to diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 103fc09..5a3d6f9 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -125,7 +125,7 @@ static struct map_desc omap243x_io_desc[] __initdata = { #endif #endif -#ifdef CONFIG_ARCH_OMAP34XX +#ifdef CONFIG_ARCH_OMAP3 static struct map_desc omap34xx_io_desc[] __initdata = { { .virtual = L3_34XX_VIRT, @@ -269,7 +269,7 @@ void __init omap243x_map_common_io() } #endif -#ifdef CONFIG_ARCH_OMAP34XX +#ifdef CONFIG_ARCH_OMAP3 void __init omap34xx_map_common_io() { iotable_init(omap34xx_io_desc, ARRAY_SIZE(omap34xx_io_desc)); diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c index baa4517..4b6e515 100644 --- a/arch/arm/mach-omap2/mcbsp.c +++ b/arch/arm/mach-omap2/mcbsp.c @@ -119,7 +119,7 @@ static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = { #define OMAP2430_MCBSP_PDATA_SZ 0 #endif -#ifdef CONFIG_ARCH_OMAP34XX +#ifdef CONFIG_ARCH_OMAP3 static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = { { .phys_base = OMAP34XX_MCBSP1_BASE, diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index fa7c8da..5ee2372 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -369,7 +369,7 @@ int __init omap2_mux_init(void) /*----------------------------------------------------------------------------*/ -#ifdef CONFIG_ARCH_OMAP34XX +#ifdef CONFIG_ARCH_OMAP3 static LIST_HEAD(muxmodes); static DEFINE_MUTEX(muxmode_mutex); @@ -1018,5 +1018,5 @@ int __init omap_mux_init(u32 mux_pbase, u32 mux_size, return 0; } -#endif /* CONFIG_ARCH_OMAP34XX */ +#endif /* CONFIG_ARCH_OMAP3 */ diff --git a/arch/arm/mach-omap2/mux.h b/arch/arm/mach-omap2/mux.h index f8c2e7a..480abc5 100644 --- a/arch/arm/mach-omap2/mux.h +++ b/arch/arm/mach-omap2/mux.h @@ -102,7 +102,7 @@ struct omap_board_mux { u16 value; }; -#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_ARCH_OMAP34XX) +#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_ARCH_OMAP3) /** * omap_mux_init_gpio - initialize a signal based on the GPIO number diff --git a/arch/arm/mach-omap2/omap_hwmod_34xx.h b/arch/arm/mach-omap2/omap_hwmod_34xx.h index b6076b9..2e629dc 100644 --- a/arch/arm/mach-omap2/omap_hwmod_34xx.h +++ b/arch/arm/mach-omap2/omap_hwmod_34xx.h @@ -12,7 +12,7 @@ #ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD34XX_H #define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD34XX_H -#ifdef CONFIG_ARCH_OMAP34XX +#ifdef CONFIG_ARCH_OMAP3 #include <plat/omap_hwmod.h> #include <mach/irqs.h> diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig index df497fc..1e22392 100644 --- a/arch/arm/plat-omap/Kconfig +++ b/arch/arm/plat-omap/Kconfig @@ -30,6 +30,7 @@ config ARCH_OMAP3 bool "TI OMAP3" depends on ARCH_OMAP2PLUS select CPU_V7 + select USB_ARCH_HAS_EHCI config ARCH_OMAP4 bool "TI OMAP4" @@ -124,7 +125,7 @@ config OMAP_MPU_TIMER config OMAP_32K_TIMER bool "Use 32KHz timer" - depends on ARCH_OMAP16XX || ARCH_OMAP2 || ARCH_OMAP34XX || ARCH_OMAP4 + depends on ARCH_OMAP16XX || ARCH_OMAP2 || ARCH_OMAP3 || ARCH_OMAP4 help Select this option if you want to enable the OMAP 32KHz timer. This timer saves power compared to the OMAP_MPU_TIMER, and has @@ -145,7 +146,7 @@ config OMAP_32K_TIMER_HZ config OMAP_DM_TIMER bool "Use dual-mode timer" - depends on ARCH_OMAP16XX || ARCH_OMAP2 || ARCH_OMAP34XX || ARCH_OMAP4 + depends on ARCH_OMAP16XX || ARCH_OMAP2 || ARCH_OMAP3 || ARCH_OMAP4 help Select this option if you want to use OMAP Dual-Mode timers. diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c index 7cbc0a2..4f29e8c 100644 --- a/arch/arm/plat-omap/common.c +++ b/arch/arm/plat-omap/common.c @@ -127,7 +127,7 @@ static cycle_t omap2430_32k_read(struct clocksource *cs) #define omap2430_32k_read NULL #endif -#ifdef CONFIG_ARCH_OMAP34XX +#ifdef CONFIG_ARCH_OMAP3 static cycle_t omap34xx_32k_read(struct clocksource *cs) { return omap_readl(OMAP3430_32KSYNCT_BASE + 0x10); diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index 0fb0e58..9608019 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -178,11 +178,11 @@ struct gpio_bank { u16 virtual_irq_start; int method; #if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2) || \ - defined(CONFIG_ARCH_OMAP34XX) || defined(CONFIG_ARCH_OMAP4) + defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4) u32 suspend_wakeup; u32 saved_wakeup; #endif -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX) || \ +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \ defined(CONFIG_ARCH_OMAP4) u32 non_wakeup_gpios; u32 enabled_non_wakeup_gpios; @@ -276,7 +276,7 @@ static struct gpio_bank gpio_bank_243x[5] = { #endif -#ifdef CONFIG_ARCH_OMAP34XX +#ifdef CONFIG_ARCH_OMAP3 static struct gpio_bank gpio_bank_34xx[6] = { { OMAP34XX_GPIO1_BASE, NULL, INT_34XX_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_24XX }, @@ -426,7 +426,7 @@ static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input) reg += OMAP7XX_GPIO_DIR_CONTROL; break; #endif -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX) +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) case METHOD_GPIO_24XX: reg += OMAP24XX_GPIO_OE; break; @@ -493,7 +493,7 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable) l &= ~(1 << gpio); break; #endif -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX) +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) case METHOD_GPIO_24XX: if (enable) reg += OMAP24XX_GPIO_SETDATAOUT; @@ -546,7 +546,7 @@ static int _get_gpio_datain(struct gpio_bank *bank, int gpio) reg += OMAP7XX_GPIO_DATA_INPUT; break; #endif -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX) +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) case METHOD_GPIO_24XX: reg += OMAP24XX_GPIO_DATAIN; break; @@ -592,7 +592,7 @@ static int _get_gpio_dataout(struct gpio_bank *bank, int gpio) reg += OMAP7XX_GPIO_DATA_OUTPUT; break; #endif -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX) || \ +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \ defined(CONFIG_ARCH_OMAP4) case METHOD_GPIO_24XX: reg += OMAP24XX_GPIO_DATAOUT; @@ -684,7 +684,7 @@ void omap_set_gpio_debounce_time(int gpio, int enc_time) } EXPORT_SYMBOL(omap_set_gpio_debounce_time); -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX) || \ +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \ defined(CONFIG_ARCH_OMAP4) static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger) @@ -856,7 +856,7 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger) goto bad; break; #endif -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX) || \ +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \ defined(CONFIG_ARCH_OMAP4) case METHOD_GPIO_24XX: set_24xx_gpio_triggering(bank, gpio, trigger); @@ -937,7 +937,7 @@ static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask) reg += OMAP7XX_GPIO_INT_STATUS; break; #endif -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX) +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) case METHOD_GPIO_24XX: reg += OMAP24XX_GPIO_IRQSTATUS1; break; @@ -954,7 +954,7 @@ static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask) __raw_writel(gpio_mask, reg); /* Workaround for clearing DSP GPIO interrupts to allow retention */ -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX) +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) reg = bank->base + OMAP24XX_GPIO_IRQSTATUS2; #endif #if defined(CONFIG_ARCH_OMAP4) @@ -1008,7 +1008,7 @@ static u32 _get_gpio_irqbank_mask(struct gpio_bank *bank) inv = 1; break; #endif -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX) +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) case METHOD_GPIO_24XX: reg += OMAP24XX_GPIO_IRQENABLE1; mask = 0xffffffff; @@ -1077,7 +1077,7 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enab l |= gpio_mask; break; #endif -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX) +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) case METHOD_GPIO_24XX: if (enable) reg += OMAP24XX_GPIO_SETIRQENABLE1; @@ -1131,7 +1131,7 @@ static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable) spin_unlock_irqrestore(&bank->lock, flags); return 0; #endif -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX) || \ +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \ defined(CONFIG_ARCH_OMAP4) case METHOD_GPIO_24XX: if (bank->non_wakeup_gpios & (1 << gpio)) { @@ -1227,7 +1227,7 @@ static void omap_gpio_free(struct gpio_chip *chip, unsigned offset) __raw_writel(1 << offset, reg); } #endif -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX) || \ +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \ defined(CONFIG_ARCH_OMAP4) if (bank->method == METHOD_GPIO_24XX) { /* Disable wake-up during idle for dynamic tick */ @@ -1286,7 +1286,7 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) if (bank->method == METHOD_GPIO_7XX) isr_reg = bank->base + OMAP7XX_GPIO_INT_STATUS; #endif -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX) +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) if (bank->method == METHOD_GPIO_24XX) isr_reg = bank->base + OMAP24XX_GPIO_IRQSTATUS1; #endif @@ -1766,7 +1766,7 @@ static int __init _omap_gpio_init(void) gpio_bank = gpio_bank_243x; } #endif -#ifdef CONFIG_ARCH_OMAP34XX +#ifdef CONFIG_ARCH_OMAP3 if (cpu_is_omap34xx()) { gpio_bank_count = OMAP34XX_NR_GPIOS; gpio_bank = gpio_bank_34xx; @@ -1809,7 +1809,7 @@ static int __init _omap_gpio_init(void) gpio_count = 32; /* 7xx has 32-bit GPIOs */ } -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX) || \ +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \ defined(CONFIG_ARCH_OMAP4) if (bank->method == METHOD_GPIO_24XX) { static const u32 non_wakeup_gpios[] = { @@ -1904,7 +1904,7 @@ static int __init _omap_gpio_init(void) } #if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2) || \ - defined(CONFIG_ARCH_OMAP34XX) || defined(CONFIG_ARCH_OMAP4) + defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4) static int omap_gpio_suspend(struct sys_device *dev, pm_message_t mesg) { int i; @@ -1927,7 +1927,7 @@ static int omap_gpio_suspend(struct sys_device *dev, pm_message_t mesg) wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA; break; #endif -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX) +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) case METHOD_GPIO_24XX: wake_status = bank->base + OMAP24XX_GPIO_WAKE_EN; wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA; @@ -1975,7 +1975,7 @@ static int omap_gpio_resume(struct sys_device *dev) wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA; break; #endif -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX) +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) case METHOD_GPIO_24XX: wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA; wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA; @@ -2013,7 +2013,7 @@ static struct sys_device omap_gpio_device = { #endif -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX) || \ +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \ defined(CONFIG_ARCH_OMAP4) static int workaround_enabled; @@ -2030,7 +2030,7 @@ void omap2_gpio_prepare_for_retention(void) if (!(bank->enabled_non_wakeup_gpios)) continue; -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX) +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) bank->saved_datain = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN); l1 = __raw_readl(bank->base + OMAP24XX_GPIO_FALLINGDETECT); l2 = __raw_readl(bank->base + OMAP24XX_GPIO_RISINGDETECT); @@ -2045,7 +2045,7 @@ void omap2_gpio_prepare_for_retention(void) bank->saved_risingdetect = l2; l1 &= ~bank->enabled_non_wakeup_gpios; l2 &= ~bank->enabled_non_wakeup_gpios; -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX) +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) __raw_writel(l1, bank->base + OMAP24XX_GPIO_FALLINGDETECT); __raw_writel(l2, bank->base + OMAP24XX_GPIO_RISINGDETECT); #endif @@ -2074,7 +2074,7 @@ void omap2_gpio_resume_after_retention(void) if (!(bank->enabled_non_wakeup_gpios)) continue; -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX) +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) __raw_writel(bank->saved_fallingdetect, bank->base + OMAP24XX_GPIO_FALLINGDETECT); __raw_writel(bank->saved_risingdetect, @@ -2113,7 +2113,7 @@ void omap2_gpio_resume_after_retention(void) if (gen) { u32 old0, old1; -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX) +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) old0 = __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0); old1 = __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1); __raw_writel(old0 | gen, bank->base + @@ -2144,7 +2144,7 @@ void omap2_gpio_resume_after_retention(void) #endif -#ifdef CONFIG_ARCH_OMAP34XX +#ifdef CONFIG_ARCH_OMAP3 /* save the registers of bank 2-6 */ void omap_gpio_save_context(void) { @@ -2241,7 +2241,7 @@ static int __init omap_gpio_sysinit(void) mpuio_init(); #if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2) || \ - defined(CONFIG_ARCH_OMAP34XX) || defined(CONFIG_ARCH_OMAP4) + defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4) if (cpu_is_omap16xx() || cpu_class_is_omap2()) { if (ret == 0) { ret = sysdev_class_register(&omap_gpio_sysclass); @@ -2301,7 +2301,7 @@ static int dbg_gpio_show(struct seq_file *s, void *unused) irqstat = irq_desc[irq].status; #if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2) || \ - defined(CONFIG_ARCH_OMAP34XX) || defined(CONFIG_ARCH_OMAP4) + defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4) if (is_in && ((bank->suspend_wakeup & mask) || irqstat & IRQ_TYPE_SENSE_MASK)) { char *trigger = NULL; diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c index 7773bce..96d2781 100644 --- a/arch/arm/plat-omap/i2c.c +++ b/arch/arm/plat-omap/i2c.c @@ -50,10 +50,10 @@ static const char name[] = "i2c_omap"; static struct resource i2c_resources[][2] = { { I2C_RESOURCE_BUILDER(0, 0) }, -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX) +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) { I2C_RESOURCE_BUILDER(OMAP2_I2C_BASE2, INT_24XX_I2C2_IRQ) }, #endif -#if defined(CONFIG_ARCH_OMAP34XX) +#if defined(CONFIG_ARCH_OMAP3) { I2C_RESOURCE_BUILDER(OMAP2_I2C_BASE3, INT_34XX_I2C3_IRQ) }, #endif }; @@ -72,10 +72,10 @@ static struct resource i2c_resources[][2] = { static u32 i2c_rate[ARRAY_SIZE(i2c_resources)]; static struct platform_device omap_i2c_devices[] = { I2C_DEV_BUILDER(1, i2c_resources[0], &i2c_rate[0]), -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX) +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) I2C_DEV_BUILDER(2, i2c_resources[1], &i2c_rate[1]), #endif -#if defined(CONFIG_ARCH_OMAP34XX) +#if defined(CONFIG_ARCH_OMAP3) I2C_DEV_BUILDER(3, i2c_resources[2], &i2c_rate[2]), #endif }; diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h index 527aaae..995466d 100644 --- a/arch/arm/plat-omap/include/plat/cpu.h +++ b/arch/arm/plat-omap/include/plat/cpu.h @@ -114,7 +114,7 @@ unsigned int omap_rev(void); # define OMAP_NAME omap16xx # endif #endif -#if (defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX)) +#if (defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)) # if (defined(OMAP_NAME) || defined(MULTI_OMAP1)) # error "OMAP1 and OMAP2 can't be selected at the same time" # endif @@ -241,7 +241,7 @@ IS_OMAP_SUBCLASS(443x, 0x443) # define cpu_is_omap242x() is_omap242x() # define cpu_is_omap243x() is_omap243x() # endif -# if defined(CONFIG_ARCH_OMAP34XX) +# if defined(CONFIG_ARCH_OMAP3) # undef cpu_is_omap34xx # undef cpu_is_omap343x # define cpu_is_omap34xx() is_omap34xx() @@ -260,7 +260,7 @@ IS_OMAP_SUBCLASS(443x, 0x443) # undef cpu_is_omap243x # define cpu_is_omap243x() 1 # endif -# if defined(CONFIG_ARCH_OMAP34XX) +# if defined(CONFIG_ARCH_OMAP3) # undef cpu_is_omap34xx # define cpu_is_omap34xx() 1 # endif @@ -385,7 +385,7 @@ IS_OMAP_TYPE(3517, 0x3517) # define cpu_is_omap2430() is_omap2430() #endif -#if defined(CONFIG_ARCH_OMAP34XX) +#if defined(CONFIG_ARCH_OMAP3) # undef cpu_is_omap3430 # undef cpu_is_omap3503 # undef cpu_is_omap3515 diff --git a/arch/arm/plat-omap/include/plat/io.h b/arch/arm/plat-omap/include/plat/io.h index 19257bb..eef914d 100644 --- a/arch/arm/plat-omap/include/plat/io.h +++ b/arch/arm/plat-omap/include/plat/io.h @@ -284,7 +284,7 @@ static inline void omap243x_map_common_io(void) } #endif -#ifdef CONFIG_ARCH_OMAP34XX +#ifdef CONFIG_ARCH_OMAP3 extern void omap34xx_map_common_io(void); #else static inline void omap34xx_map_common_io(void) diff --git a/arch/arm/plat-omap/include/plat/mcbsp.h b/arch/arm/plat-omap/include/plat/mcbsp.h index 9515062..0d7e536 100644 --- a/arch/arm/plat-omap/include/plat/mcbsp.h +++ b/arch/arm/plat-omap/include/plat/mcbsp.h @@ -103,7 +103,7 @@ #define AUDIO_DMA_TX OMAP_DMA_MCBSP1_TX #define AUDIO_DMA_RX OMAP_DMA_MCBSP1_RX -#elif defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX) || \ +#elif defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \ defined(CONFIG_ARCH_OMAP4) #define OMAP_MCBSP_REG_DRR2 0x00 @@ -374,7 +374,7 @@ struct omap_mcbsp_platform_data { u8 dma_rx_sync, dma_tx_sync; u16 rx_irq, tx_irq; struct omap_mcbsp_ops *ops; -#ifdef CONFIG_ARCH_OMAP34XX +#ifdef CONFIG_ARCH_OMAP3 u16 buffer_size; #endif }; @@ -410,7 +410,7 @@ struct omap_mcbsp { struct omap_mcbsp_platform_data *pdata; struct clk *iclk; struct clk *fclk; -#ifdef CONFIG_ARCH_OMAP34XX +#ifdef CONFIG_ARCH_OMAP3 int dma_op_mode; u16 max_tx_thres; u16 max_rx_thres; @@ -423,7 +423,7 @@ int omap_mcbsp_init(void); void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config, int size); void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg * config); -#ifdef CONFIG_ARCH_OMAP34XX +#ifdef CONFIG_ARCH_OMAP3 void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold); void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold); u16 omap_mcbsp_get_max_tx_threshold(unsigned int id); diff --git a/arch/arm/plat-omap/include/plat/omap34xx.h b/arch/arm/plat-omap/include/plat/omap34xx.h index 077f059..2845fdc 100644 --- a/arch/arm/plat-omap/include/plat/omap34xx.h +++ b/arch/arm/plat-omap/include/plat/omap34xx.h @@ -21,8 +21,8 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#ifndef __ASM_ARCH_OMAP34XX_H -#define __ASM_ARCH_OMAP34XX_H +#ifndef __ASM_ARCH_OMAP3_H +#define __ASM_ARCH_OMAP3_H /* * Please place only base defines here and put the rest in device @@ -82,5 +82,5 @@ #define OMAP34XX_MAILBOX_BASE (L4_34XX_BASE + 0x94000) -#endif /* __ASM_ARCH_OMAP34XX_H */ +#endif /* __ASM_ARCH_OMAP3_H */ diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c index f757672..c1eb615 100644 --- a/arch/arm/plat-omap/mcbsp.c +++ b/arch/arm/plat-omap/mcbsp.c @@ -198,7 +198,7 @@ void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg *config) } EXPORT_SYMBOL(omap_mcbsp_config); -#ifdef CONFIG_ARCH_OMAP34XX +#ifdef CONFIG_ARCH_OMAP3 /* * omap_mcbsp_set_tx_threshold configures how to deal * with transmit threshold. the threshold value and handler can be @@ -1107,7 +1107,7 @@ void omap_mcbsp_set_spi_mode(unsigned int id, } EXPORT_SYMBOL(omap_mcbsp_set_spi_mode); -#ifdef CONFIG_ARCH_OMAP34XX +#ifdef CONFIG_ARCH_OMAP3 #define max_thres(m) (mcbsp->pdata->buffer_size) #define valid_threshold(m, val) ((val) <= max_thres(m)) #define THRESHOLD_PROP_BUILDER(prop) \ @@ -1246,7 +1246,7 @@ static inline void __devexit omap34xx_device_exit(struct omap_mcbsp *mcbsp) #else static inline void __devinit omap34xx_device_init(struct omap_mcbsp *mcbsp) {} static inline void __devexit omap34xx_device_exit(struct omap_mcbsp *mcbsp) {} -#endif /* CONFIG_ARCH_OMAP34XX */ +#endif /* CONFIG_ARCH_OMAP3 */ /* * McBSP1 and McBSP3 are directly mapped on 1610 and 1510. diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index e0cbb93..51f4dfb 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -53,7 +53,7 @@ #define OMAP4_SRAM_PUB_PA (OMAP4_SRAM_PA + 0x4000) #define OMAP4_SRAM_PUB_VA (OMAP4_SRAM_VA + 0x4000) -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX) +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) #define SRAM_BOOTLOADER_SZ 0x00 #else #define SRAM_BOOTLOADER_SZ 0x80 diff --git a/drivers/net/smc911x.h b/drivers/net/smc911x.h index 1477ff8..3269292 100644 --- a/drivers/net/smc911x.h +++ b/drivers/net/smc911x.h @@ -42,7 +42,7 @@ #define SMC_USE_16BIT 0 #define SMC_USE_32BIT 1 #define SMC_IRQ_SENSE IRQF_TRIGGER_LOW -#elif defined(CONFIG_ARCH_OMAP34XX) +#elif defined(CONFIG_ARCH_OMAP3) #define SMC_USE_16BIT 0 #define SMC_USE_32BIT 1 #define SMC_IRQ_SENSE IRQF_TRIGGER_LOW diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 23bd252..66c35d7 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -164,7 +164,7 @@ config SPI_OMAP_UWIRE config SPI_OMAP24XX tristate "McSPI driver for OMAP24xx/OMAP34xx" - depends on ARCH_OMAP2 || ARCH_OMAP34XX + depends on ARCH_OMAP2 || ARCH_OMAP3 help SPI master controller for OMAP24xx/OMAP34xx Multichannel SPI (McSPI) modules. diff --git a/drivers/spi/omap2_mcspi.c b/drivers/spi/omap2_mcspi.c index bf5f95a..715c518 100644 --- a/drivers/spi/omap2_mcspi.c +++ b/drivers/spi/omap2_mcspi.c @@ -1014,7 +1014,7 @@ static u8 __initdata spi2_txdma_id[] = { OMAP24XX_DMA_SPI2_TX1, }; -#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP34XX) \ +#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3) \ || defined(CONFIG_ARCH_OMAP4) static u8 __initdata spi3_rxdma_id[] = { OMAP24XX_DMA_SPI3_RX0, diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig index 81aac7f..4f5bb56 100644 --- a/drivers/usb/Kconfig +++ b/drivers/usb/Kconfig @@ -61,7 +61,7 @@ config USB_ARCH_HAS_EHCI default y if ARCH_W90X900 default y if ARCH_AT91SAM9G45 default y if ARCH_MXC - default y if ARCH_OMAP34XX + default y if ARCH_OMAP3 default PCI # ARM SA1111 chips have a non-PCI based "OHCI-compatible" USB host interface. diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 1ec3857..d8d6d34 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -1118,7 +1118,7 @@ MODULE_LICENSE ("GPL"); #define PLATFORM_DRIVER ehci_hcd_au1xxx_driver #endif -#ifdef CONFIG_ARCH_OMAP34XX +#ifdef CONFIG_ARCH_OMAP3 #include "ehci-omap.c" #define PLATFORM_DRIVER ehci_hcd_omap_driver #endif diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig index d9db864..b4c783c 100644 --- a/drivers/usb/musb/Kconfig +++ b/drivers/usb/musb/Kconfig @@ -37,7 +37,7 @@ config USB_MUSB_SOC depends on USB_MUSB_HDRC default y if ARCH_DAVINCI default y if ARCH_OMAP2430 - default y if ARCH_OMAP34XX + default y if ARCH_OMAP3 default y if (BF54x && !BF544) default y if (BF52x && !BF522 && !BF523) @@ -48,7 +48,7 @@ comment "OMAP 243x high speed USB support" depends on USB_MUSB_HDRC && ARCH_OMAP2430 comment "OMAP 343x high speed USB support" - depends on USB_MUSB_HDRC && ARCH_OMAP34XX + depends on USB_MUSB_HDRC && ARCH_OMAP3 comment "Blackfin high speed USB Support" depends on USB_MUSB_HDRC && ((BF54x && !BF544) || (BF52x && !BF522 && !BF523)) @@ -153,7 +153,7 @@ config MUSB_PIO_ONLY config USB_INVENTRA_DMA bool depends on USB_MUSB_HDRC && !MUSB_PIO_ONLY - default ARCH_OMAP2430 || ARCH_OMAP34XX || BLACKFIN + default ARCH_OMAP2430 || ARCH_OMAP3 || BLACKFIN help Enable DMA transfers using Mentor's engine. diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 5eb9318..738efd8 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -1000,7 +1000,7 @@ static void musb_shutdown(struct platform_device *pdev) * more than selecting one of a bunch of predefined configurations. */ #if defined(CONFIG_USB_TUSB6010) || \ - defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP34XX) + defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3) static ushort __initdata fifo_mode = 4; #else static ushort __initdata fifo_mode = 2; diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h index 03d5090..5514c7e 100644 --- a/drivers/usb/musb/musb_core.h +++ b/drivers/usb/musb/musb_core.h @@ -562,7 +562,7 @@ extern void musb_hnp_stop(struct musb *musb); extern int musb_platform_set_mode(struct musb *musb, u8 musb_mode); #if defined(CONFIG_USB_TUSB6010) || defined(CONFIG_BLACKFIN) || \ - defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP34XX) + defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3) extern void musb_platform_try_idle(struct musb *musb, unsigned long timeout); #else #define musb_platform_try_idle(x, y) do {} while (0) diff --git a/drivers/w1/masters/Kconfig b/drivers/w1/masters/Kconfig index 3195fb8..80b3b12 100644 --- a/drivers/w1/masters/Kconfig +++ b/drivers/w1/masters/Kconfig @@ -60,7 +60,7 @@ config W1_MASTER_GPIO config HDQ_MASTER_OMAP tristate "OMAP HDQ driver" - depends on ARCH_OMAP2430 || ARCH_OMAP34XX + depends on ARCH_OMAP2430 || ARCH_OMAP3 help Say Y here if you want support for the 1-wire or HDQ Interface on an OMAP processor. diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index b45e289..3da3f48 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -194,7 +194,7 @@ config EP93XX_WATCHDOG config OMAP_WATCHDOG tristate "OMAP Watchdog" - depends on ARCH_OMAP16XX || ARCH_OMAP2 || ARCH_OMAP34XX + depends on ARCH_OMAP16XX || ARCH_OMAP2 || ARCH_OMAP3 help Support for TI OMAP1610/OMAP1710/OMAP2420/OMAP3430 watchdog. Say 'Y' here to enable the OMAP1610/OMAP1710/OMAP2420/OMAP3430 watchdog timer. diff --git a/sound/soc/omap/omap-mcbsp.c b/sound/soc/omap/omap-mcbsp.c index 26e728d..c0039b3 100644 --- a/sound/soc/omap/omap-mcbsp.c +++ b/sound/soc/omap/omap-mcbsp.c @@ -82,11 +82,11 @@ static const int omap1_dma_reqs[][2] = {}; static const unsigned long omap1_mcbsp_port[][2] = {}; #endif -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX) +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) static const int omap24xx_dma_reqs[][2] = { { OMAP24XX_DMA_MCBSP1_TX, OMAP24XX_DMA_MCBSP1_RX }, { OMAP24XX_DMA_MCBSP2_TX, OMAP24XX_DMA_MCBSP2_RX }, -#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP34XX) +#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3) { OMAP24XX_DMA_MCBSP3_TX, OMAP24XX_DMA_MCBSP3_RX }, { OMAP24XX_DMA_MCBSP4_TX, OMAP24XX_DMA_MCBSP4_RX }, { OMAP24XX_DMA_MCBSP5_TX, OMAP24XX_DMA_MCBSP5_RX }, @@ -124,7 +124,7 @@ static const unsigned long omap2430_mcbsp_port[][2] = { static const unsigned long omap2430_mcbsp_port[][2] = {}; #endif -#if defined(CONFIG_ARCH_OMAP34XX) +#if defined(CONFIG_ARCH_OMAP3) static const unsigned long omap34xx_mcbsp_port[][2] = { { OMAP34XX_MCBSP1_BASE + OMAP_MCBSP_REG_DXR, OMAP34XX_MCBSP1_BASE + OMAP_MCBSP_REG_DRR }, diff --git a/sound/soc/omap/omap-mcbsp.h b/sound/soc/omap/omap-mcbsp.h index 647d2f9..1968d03 100644 --- a/sound/soc/omap/omap-mcbsp.h +++ b/sound/soc/omap/omap-mcbsp.h @@ -50,7 +50,7 @@ enum omap_mcbsp_div { #undef NUM_LINKS #define NUM_LINKS 3 #endif -#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP34XX) +#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3) #undef NUM_LINKS #define NUM_LINKS 5 #endif |