diff options
-rw-r--r-- | drivers/media/common/ir-keymaps.c | 92 | ||||
-rw-r--r-- | drivers/media/video/ir-kbd-i2c.c | 42 | ||||
-rw-r--r-- | drivers/media/video/saa7134/saa7134-cards.c | 1 | ||||
-rw-r--r-- | drivers/media/video/saa7134/saa7134-i2c.c | 1 | ||||
-rw-r--r-- | drivers/media/video/saa7134/saa7134-input.c | 52 | ||||
-rw-r--r-- | include/media/ir-common.h | 1 |
6 files changed, 186 insertions, 3 deletions
diff --git a/drivers/media/common/ir-keymaps.c b/drivers/media/common/ir-keymaps.c index b7ed88c..4952aeb 100644 --- a/drivers/media/common/ir-keymaps.c +++ b/drivers/media/common/ir-keymaps.c @@ -517,7 +517,8 @@ EXPORT_SYMBOL_GPL(ir_codes_adstech_dvb_t_pci); /* ---------------------------------------------------------------------- */ -/* MSI TV@nywhere remote */ +/* MSI TV@nywhere MASTER remote */ + IR_KEYTAB_TYPE ir_codes_msi_tvanywhere[IR_KEYTAB_SIZE] = { /* Keys 0 to 9 */ [ 0x00 ] = KEY_0, @@ -551,6 +552,95 @@ EXPORT_SYMBOL_GPL(ir_codes_msi_tvanywhere); /* ---------------------------------------------------------------------- */ +/* + Keycodes for remote on the MSI TV@nywhere Plus. The controller IC on the card + is marked "KS003". The controller is I2C at address 0x30, but does not seem + to respond to probes until a read is performed from a valid device. + I don't know why... + + Note: This remote may be of similar or identical design to the + Pixelview remote (?). The raw codes and duplicate button codes + appear to be the same. + + Henry Wong <henry@stuffedcow.net> + Some changes to formatting and keycodes by Mark Schultz <n9xmj@yahoo.com> + +*/ + +IR_KEYTAB_TYPE ir_codes_msi_tvanywhere_plus[IR_KEYTAB_SIZE] = { + +/* ---- Remote Button Layout ---- + + POWER SOURCE SCAN MUTE + TV/FM 1 2 3 + |> 4 5 6 + <| 7 8 9 + ^^UP 0 + RECALL + vvDN RECORD STOP PLAY + + MINIMIZE ZOOM + + CH+ + VOL- VOL+ + CH- + + SNAPSHOT MTS + + << FUNC >> RESET +*/ + + [0x01] = KEY_KP1, /* 1 */ + [0x0b] = KEY_KP2, /* 2 */ + [0x1b] = KEY_KP3, /* 3 */ + [0x05] = KEY_KP4, /* 4 */ + [0x09] = KEY_KP5, /* 5 */ + [0x15] = KEY_KP6, /* 6 */ + [0x06] = KEY_KP7, /* 7 */ + [0x0a] = KEY_KP8, /* 8 */ + [0x12] = KEY_KP9, /* 9 */ + [0x02] = KEY_KP0, /* 0 */ + [0x10] = KEY_KPPLUS, /* + */ + [0x13] = KEY_AGAIN, /* Recall */ + + [0x1e] = KEY_POWER, /* Power */ + [0x07] = KEY_TUNER, /* Source */ + [0x1c] = KEY_SEARCH, /* Scan */ + [0x18] = KEY_MUTE, /* Mute */ + + [0x03] = KEY_RADIO, /* TV/FM */ + /* The next four keys are duplicates that appear to send the + same IR code as Ch+, Ch-, >>, and << . The raw code assigned + to them is the actual code + 0x20 - they will never be + detected as such unless some way is discovered to distinguish + these buttons from those that have the same code. */ + [0x3f] = KEY_RIGHT, /* |> and Ch+ */ + [0x37] = KEY_LEFT, /* <| and Ch- */ + [0x2c] = KEY_UP, /* ^^Up and >> */ + [0x24] = KEY_DOWN, /* vvDn and << */ + + [0x00] = KEY_RECORD, /* Record */ + [0x08] = KEY_STOP, /* Stop */ + [0x11] = KEY_PLAY, /* Play */ + + [0x0f] = KEY_CLOSE, /* Minimize */ + [0x19] = KEY_ZOOM, /* Zoom */ + [0x1a] = KEY_SHUFFLE, /* Snapshot */ + [0x0d] = KEY_LANGUAGE, /* MTS */ + + [0x14] = KEY_VOLUMEDOWN, /* Vol- */ + [0x16] = KEY_VOLUMEUP, /* Vol+ */ + [0x17] = KEY_CHANNELDOWN, /* Ch- */ + [0x1f] = KEY_CHANNELUP, /* Ch+ */ + + [0x04] = KEY_REWIND, /* << */ + [0x0e] = KEY_MENU, /* Function */ + [0x0c] = KEY_FASTFORWARD, /* >> */ + [0x1d] = KEY_RESTART, /* Reset */ +}; +EXPORT_SYMBOL_GPL(ir_codes_msi_tvanywhere_plus); + +/* ---------------------------------------------------------------------- */ + /* Cinergy 1400 DVB-T */ IR_KEYTAB_TYPE ir_codes_cinergy_1400[IR_KEYTAB_SIZE] = { [ 0x01 ] = KEY_POWER, diff --git a/drivers/media/video/ir-kbd-i2c.c b/drivers/media/video/ir-kbd-i2c.c index 703195a..efe8499 100644 --- a/drivers/media/video/ir-kbd-i2c.c +++ b/drivers/media/video/ir-kbd-i2c.c @@ -12,6 +12,10 @@ * Markus Rechberger <mrechberger@gmail.com> * modified for DViCO Fusion HDTV 5 RT GOLD by * Chaogui Zhang <czhang1974@gmail.com> + * modified for MSI TV@nywhere Plus by + * Henry Wong <henry@stuffedcow.net> + * Mark Schultz <n9xmj@yahoo.com> + * Brian Rogers <brian_rogers@comcast.net> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -242,9 +246,15 @@ static void ir_timer(unsigned long data) static void ir_work(struct work_struct *work) { struct IR_i2c *ir = container_of(work, struct IR_i2c, work); + int polling_interval = 100; + + /* MSI TV@nywhere Plus requires more frequent polling + otherwise it will miss some keypresses */ + if (ir->c.adapter->id == I2C_HW_SAA7134 && ir->c.addr == 0x30) + polling_interval = 50; ir_key_poll(ir); - mod_timer(&ir->timer, jiffies + msecs_to_jiffies(100)); + mod_timer(&ir->timer, jiffies + msecs_to_jiffies(polling_interval)); } /* ----------------------------------------------------------------------- */ @@ -483,9 +493,37 @@ static int ir_probe(struct i2c_adapter *adap) (1 == rc) ? "yes" : "no"); if (1 == rc) { ir_attach(adap, probe[i], 0, 0); - break; + return 0; } } + + /* Special case for MSI TV@nywhere Plus remote */ + if (adap->id == I2C_HW_SAA7134) { + u8 temp; + + /* MSI TV@nywhere Plus controller doesn't seem to + respond to probes unless we read something from + an existing device. Weird... */ + + msg.addr = 0x50; + rc = i2c_transfer(adap, &msg, 1); + dprintk(1, "probe 0x%02x @ %s: %s\n", + msg.addr, adap->name, + (1 == rc) ? "yes" : "no"); + + /* Now do the probe. The controller does not respond + to 0-byte reads, so we use a 1-byte read instead. */ + msg.addr = 0x30; + msg.len = 1; + msg.buf = &temp; + rc = i2c_transfer(adap, &msg, 1); + dprintk(1, "probe 0x%02x @ %s: %s\n", + msg.addr, adap->name, + (1 == rc) ? "yes" : "no"); + if (1 == rc) + ir_attach(adap, msg.addr, 0, 0); + } + return 0; } diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c index c9392c4..ddc5402 100644 --- a/drivers/media/video/saa7134/saa7134-cards.c +++ b/drivers/media/video/saa7134/saa7134-cards.c @@ -5969,6 +5969,7 @@ int saa7134_board_init1(struct saa7134_dev *dev) case SAA7134_BOARD_PINNACLE_PCTV_110i: case SAA7134_BOARD_PINNACLE_PCTV_310i: case SAA7134_BOARD_UPMOST_PURPLE_TV: + case SAA7134_BOARD_MSI_TVATANYWHERE_PLUS: case SAA7134_BOARD_HAUPPAUGE_HVR1110: case SAA7134_BOARD_BEHOLD_607_9FM: case SAA7134_BOARD_BEHOLD_M6: diff --git a/drivers/media/video/saa7134/saa7134-i2c.c b/drivers/media/video/saa7134/saa7134-i2c.c index b02965c..20c1b33 100644 --- a/drivers/media/video/saa7134/saa7134-i2c.c +++ b/drivers/media/video/saa7134/saa7134-i2c.c @@ -337,6 +337,7 @@ static int attach_inform(struct i2c_client *client) case 0x47: case 0x71: case 0x2d: + case 0x30: { struct IR_i2c *ir = i2c_get_clientdata(client); d1printk("%s i2c IR detected (%s).\n", diff --git a/drivers/media/video/saa7134/saa7134-input.c b/drivers/media/video/saa7134/saa7134-input.c index 72a1c67..c53fd5f 100644 --- a/drivers/media/video/saa7134/saa7134-input.c +++ b/drivers/media/video/saa7134/saa7134-input.c @@ -118,6 +118,53 @@ static int build_key(struct saa7134_dev *dev) /* --------------------- Chip specific I2C key builders ----------------- */ +static int get_key_msi_tvanywhere_plus(struct IR_i2c *ir, u32 *ir_key, + u32 *ir_raw) +{ + unsigned char b; + int gpio; + + /* <dev> is needed to access GPIO. Used by the saa_readl macro. */ + struct saa7134_dev *dev = ir->c.adapter->algo_data; + if (dev == NULL) { + dprintk("get_key_msi_tvanywhere_plus: " + "gir->c.adapter->algo_data is NULL!\n"); + return -EIO; + } + + /* rising SAA7134_GPIO_GPRESCAN reads the status */ + + saa_clearb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN); + saa_setb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN); + + gpio = saa_readl(SAA7134_GPIO_GPSTATUS0 >> 2); + + /* GPIO&0x40 is pulsed low when a button is pressed. Don't do + I2C receive if gpio&0x40 is not low. */ + + if (gpio & 0x40) + return 0; /* No button press */ + + /* GPIO says there is a button press. Get it. */ + + if (1 != i2c_master_recv(&ir->c, &b, 1)) { + i2cdprintk("read error\n"); + return -EIO; + } + + /* No button press */ + + if (b == 0xff) + return 0; + + /* Button pressed */ + + dprintk("get_key_msi_tvanywhere_plus: Key = 0x%02X\n", b); + *ir_key = b; + *ir_raw = b; + return 1; +} + static int get_key_purpletv(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw) { unsigned char b; @@ -641,6 +688,11 @@ void saa7134_set_i2c_ir(struct saa7134_dev *dev, struct IR_i2c *ir) ir->get_key = get_key_purpletv; ir->ir_codes = ir_codes_purpletv; break; + case SAA7134_BOARD_MSI_TVATANYWHERE_PLUS: + snprintf(ir->c.name, sizeof(ir->c.name), "MSI TV@nywhere Plus"); + ir->get_key = get_key_msi_tvanywhere_plus; + ir->ir_codes = ir_codes_msi_tvanywhere_plus; + break; case SAA7134_BOARD_HAUPPAUGE_HVR1110: snprintf(ir->c.name, sizeof(ir->c.name), "HVR 1110"); ir->get_key = get_key_hvr1110; diff --git a/include/media/ir-common.h b/include/media/ir-common.h index 436360e..38f2d93 100644 --- a/include/media/ir-common.h +++ b/include/media/ir-common.h @@ -156,6 +156,7 @@ extern IR_KEYTAB_TYPE ir_codes_powercolor_real_angel[IR_KEYTAB_SIZE]; extern IR_KEYTAB_TYPE ir_codes_avermedia_a16d[IR_KEYTAB_SIZE]; extern IR_KEYTAB_TYPE ir_codes_encore_enltv_fm53[IR_KEYTAB_SIZE]; extern IR_KEYTAB_TYPE ir_codes_real_audio_220_32_keys[IR_KEYTAB_SIZE]; +extern IR_KEYTAB_TYPE ir_codes_msi_tvanywhere_plus[IR_KEYTAB_SIZE]; #endif /* |