diff options
137 files changed, 1609 insertions, 1668 deletions
diff --git a/Documentation/filesystems/ntfs.txt b/Documentation/filesystems/ntfs.txt index 614de31..2511685 100644 --- a/Documentation/filesystems/ntfs.txt +++ b/Documentation/filesystems/ntfs.txt @@ -457,6 +457,12 @@ ChangeLog Note, a technical ChangeLog aimed at kernel hackers is in fs/ntfs/ChangeLog. +2.1.26: + - Implement support for sector sizes above 512 bytes (up to the maximum + supported by NTFS which is 4096 bytes). + - Enhance support for NTFS volumes which were supported by Windows but + not by Linux due to invalid attribute list attribute flags. + - A few minor updates and bug fixes. 2.1.25: - Write support is now extended with write(2) being able to both overwrite existing file data and to extend files. Also, if a write diff --git a/Documentation/filesystems/tmpfs.txt b/Documentation/filesystems/tmpfs.txt index 8a15541..1773106 100644 --- a/Documentation/filesystems/tmpfs.txt +++ b/Documentation/filesystems/tmpfs.txt @@ -92,6 +92,15 @@ NodeList format is a comma-separated list of decimal numbers and ranges, a range being two hyphen-separated decimal numbers, the smallest and largest node numbers in the range. For example, mpol=bind:0-3,5,7,9-15 +Note that trying to mount a tmpfs with an mpol option will fail if the +running kernel does not support NUMA; and will fail if its nodelist +specifies a node >= MAX_NUMNODES. If your system relies on that tmpfs +being mounted, but from time to time runs a kernel built without NUMA +capability (perhaps a safe recovery kernel), or configured to support +fewer nodes, then it is advisable to omit the mpol option from automatic +mount options. It can be added later, when the tmpfs is already mounted +on MountPoint, by 'mount -o remount,mpol=Policy:NodeList MountPoint'. + To specify the initial root directory you can use the following mount options: diff --git a/Documentation/x86_64/boot-options.txt b/Documentation/x86_64/boot-options.txt index 153740f..1921353 100644 --- a/Documentation/x86_64/boot-options.txt +++ b/Documentation/x86_64/boot-options.txt @@ -52,6 +52,10 @@ APICs apicmaintimer. Useful when your PIT timer is totally broken. + disable_8254_timer / enable_8254_timer + Enable interrupt 0 timer routing over the 8254 in addition to over + the IO-APIC. The kernel tries to set a sensible default. + Early Console syntax: earlyprintk=vga @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 16 -EXTRAVERSION =-rc4 +EXTRAVERSION =-rc5 NAME=Sliding Snow Leopard # *DOCUMENTATION* diff --git a/arch/arm/mach-at91rm9200/gpio.c b/arch/arm/mach-at91rm9200/gpio.c index a9f718b..0e396fe 100644 --- a/arch/arm/mach-at91rm9200/gpio.c +++ b/arch/arm/mach-at91rm9200/gpio.c @@ -274,8 +274,18 @@ static void gpio_irq_handler(unsigned irq, struct irqdesc *desc, struct pt_regs gpio = &irq_desc[pin]; while (isr) { - if (isr & 1) - gpio->handle(pin, gpio, regs); + if (isr & 1) { + if (unlikely(gpio->disable_depth)) { + /* + * The core ARM interrupt handler lazily disables IRQs so + * another IRQ must be generated before it actually gets + * here to be disabled on the GPIO controller. + */ + gpio_irq_mask(pin); + } + else + gpio->handle(pin, gpio, regs); + } pin++; gpio++; isr >>= 1; diff --git a/arch/i386/Kconfig b/arch/i386/Kconfig index 0afec85..5b1a7d4 100644 --- a/arch/i386/Kconfig +++ b/arch/i386/Kconfig @@ -733,7 +733,7 @@ config PHYSICAL_START config HOTPLUG_CPU bool "Support for hot-pluggable CPUs (EXPERIMENTAL)" - depends on SMP && HOTPLUG && EXPERIMENTAL + depends on SMP && HOTPLUG && EXPERIMENTAL && !X86_VOYAGER ---help--- Say Y here to experiment with turning CPUs off and on. CPUs can be controlled through /sys/devices/system/cpu. @@ -1060,6 +1060,7 @@ source "arch/i386/oprofile/Kconfig" config KPROBES bool "Kprobes (EXPERIMENTAL)" + depends on EXPERIMENTAL && MODULES help Kprobes allows you to trap at almost any kernel address and execute a callback function. register_kprobe() establishes diff --git a/arch/i386/kernel/Makefile b/arch/i386/kernel/Makefile index 60c3f76..53bb9a7 100644 --- a/arch/i386/kernel/Makefile +++ b/arch/i386/kernel/Makefile @@ -7,7 +7,7 @@ extra-y := head.o init_task.o vmlinux.lds obj-y := process.o semaphore.o signal.o entry.o traps.o irq.o \ ptrace.o time.o ioport.o ldt.o setup.o i8259.o sys_i386.o \ pci-dma.o i386_ksyms.o i387.o dmi_scan.o bootflag.o \ - quirks.o i8237.o + quirks.o i8237.o topology.o obj-y += cpu/ obj-y += timers/ diff --git a/arch/i386/kernel/acpi/boot.c b/arch/i386/kernel/acpi/boot.c index 79577f0..8309a7b 100644 --- a/arch/i386/kernel/acpi/boot.c +++ b/arch/i386/kernel/acpi/boot.c @@ -44,9 +44,6 @@ extern void __init clustered_apic_check(void); extern int gsi_irq_sharing(int gsi); #include <asm/proto.h> -static inline int acpi_madt_oem_check(char *oem_id, char *oem_table_id) { return 0; } - - #else /* X86 */ #ifdef CONFIG_X86_LOCAL_APIC diff --git a/arch/i386/kernel/cpu/common.c b/arch/i386/kernel/cpu/common.c index 7eb9213..4ecd4b3 100644 --- a/arch/i386/kernel/cpu/common.c +++ b/arch/i386/kernel/cpu/common.c @@ -4,6 +4,7 @@ #include <linux/smp.h> #include <linux/module.h> #include <linux/percpu.h> +#include <linux/bootmem.h> #include <asm/semaphore.h> #include <asm/processor.h> #include <asm/i387.h> @@ -18,6 +19,9 @@ #include "cpu.h" +DEFINE_PER_CPU(struct Xgt_desc_struct, cpu_gdt_descr); +EXPORT_PER_CPU_SYMBOL(cpu_gdt_descr); + DEFINE_PER_CPU(unsigned char, cpu_16bit_stack[CPU_16BIT_STACK_SIZE]); EXPORT_PER_CPU_SYMBOL(cpu_16bit_stack); @@ -571,8 +575,9 @@ void __devinit cpu_init(void) int cpu = smp_processor_id(); struct tss_struct * t = &per_cpu(init_tss, cpu); struct thread_struct *thread = ¤t->thread; - struct desc_struct *gdt = get_cpu_gdt_table(cpu); + struct desc_struct *gdt; __u32 stk16_off = (__u32)&per_cpu(cpu_16bit_stack, cpu); + struct Xgt_desc_struct *cpu_gdt_descr = &per_cpu(cpu_gdt_descr, cpu); if (cpu_test_and_set(cpu, cpu_initialized)) { printk(KERN_WARNING "CPU#%d already initialized!\n", cpu); @@ -590,6 +595,25 @@ void __devinit cpu_init(void) } /* + * This is a horrible hack to allocate the GDT. The problem + * is that cpu_init() is called really early for the boot CPU + * (and hence needs bootmem) but much later for the secondary + * CPUs, when bootmem will have gone away + */ + if (NODE_DATA(0)->bdata->node_bootmem_map) { + gdt = (struct desc_struct *)alloc_bootmem_pages(PAGE_SIZE); + /* alloc_bootmem_pages panics on failure, so no check */ + memset(gdt, 0, PAGE_SIZE); + } else { + gdt = (struct desc_struct *)get_zeroed_page(GFP_KERNEL); + if (unlikely(!gdt)) { + printk(KERN_CRIT "CPU%d failed to allocate GDT\n", cpu); + for (;;) + local_irq_enable(); + } + } + + /* * Initialize the per-CPU GDT with the boot GDT, * and set up the GDT descriptor: */ @@ -601,10 +625,10 @@ void __devinit cpu_init(void) ((((__u64)stk16_off) << 32) & 0xff00000000000000ULL) | (CPU_16BIT_STACK_SIZE - 1); - cpu_gdt_descr[cpu].size = GDT_SIZE - 1; - cpu_gdt_descr[cpu].address = (unsigned long)gdt; + cpu_gdt_descr->size = GDT_SIZE - 1; + cpu_gdt_descr->address = (unsigned long)gdt; - load_gdt(&cpu_gdt_descr[cpu]); + load_gdt(cpu_gdt_descr); load_idt(&idt_descr); /* diff --git a/arch/i386/kernel/efi.c b/arch/i386/kernel/efi.c index ecad519..e3e42fd 100644 --- a/arch/i386/kernel/efi.c +++ b/arch/i386/kernel/efi.c @@ -103,17 +103,19 @@ static void efi_call_phys_prelog(void) */ local_flush_tlb(); - cpu_gdt_descr[0].address = __pa(cpu_gdt_descr[0].address); - load_gdt((struct Xgt_desc_struct *) __pa(&cpu_gdt_descr[0])); + per_cpu(cpu_gdt_descr, 0).address = + __pa(per_cpu(cpu_gdt_descr, 0).address); + load_gdt((struct Xgt_desc_struct *)__pa(&per_cpu(cpu_gdt_descr, 0))); } static void efi_call_phys_epilog(void) { unsigned long cr4; - cpu_gdt_descr[0].address = - (unsigned long) __va(cpu_gdt_descr[0].address); - load_gdt(&cpu_gdt_descr[0]); + per_cpu(cpu_gdt_descr, 0).address = + (unsigned long)__va(per_cpu(cpu_gdt_descr, 0).address); + load_gdt((struct Xgt_desc_struct *)__va(&per_cpu(cpu_gdt_descr, 0))); + cr4 = read_cr4(); if (cr4 & X86_CR4_PSE) { diff --git a/arch/i386/kernel/head.S b/arch/i386/kernel/head.S index 2bee649..e0b7c63 100644 --- a/arch/i386/kernel/head.S +++ b/arch/i386/kernel/head.S @@ -534,5 +534,3 @@ ENTRY(cpu_gdt_table) .quad 0x0000000000000000 /* 0xf0 - unused */ .quad 0x0000000000000000 /* 0xf8 - GDT entry 31: double-fault TSS */ - /* Be sure this is zeroed to avoid false validations in Xen */ - .fill PAGE_SIZE_asm / 8 - GDT_ENTRIES,8,0 diff --git a/arch/i386/kernel/i386_ksyms.c b/arch/i386/kernel/i386_ksyms.c index 3999bec..0553250 100644 --- a/arch/i386/kernel/i386_ksyms.c +++ b/arch/i386/kernel/i386_ksyms.c @@ -3,8 +3,6 @@ #include <asm/checksum.h> #include <asm/desc.h> -EXPORT_SYMBOL_GPL(cpu_gdt_descr); - EXPORT_SYMBOL(__down_failed); EXPORT_SYMBOL(__down_failed_interruptible); EXPORT_SYMBOL(__down_failed_trylock); diff --git a/arch/i386/kernel/io_apic.c b/arch/i386/kernel/io_apic.c index f2dd218..235822b 100644 --- a/arch/i386/kernel/io_apic.c +++ b/arch/i386/kernel/io_apic.c @@ -2566,8 +2566,10 @@ int __init io_apic_get_unique_id (int ioapic, int apic_id) spin_unlock_irqrestore(&ioapic_lock, flags); /* Sanity check */ - if (reg_00.bits.ID != apic_id) - panic("IOAPIC[%d]: Unable change apic_id!\n", ioapic); + if (reg_00.bits.ID != apic_id) { + printk("IOAPIC[%d]: Unable to change apic_id!\n", ioapic); + return -1; + } } apic_printk(APIC_VERBOSE, KERN_INFO diff --git a/arch/i386/kernel/kprobes.c b/arch/i386/kernel/kprobes.c index 6483eeb..694a139 100644 --- a/arch/i386/kernel/kprobes.c +++ b/arch/i386/kernel/kprobes.c @@ -58,6 +58,11 @@ static inline int is_IF_modifier(kprobe_opcode_t opcode) int __kprobes arch_prepare_kprobe(struct kprobe *p) { + /* insn: must be on special executable page on i386. */ + p->ainsn.insn = get_insn_slot(); + if (!p->ainsn.insn) + return -ENOMEM; + memcpy(p->ainsn.insn, p->addr, MAX_INSN_SIZE * sizeof(kprobe_opcode_t)); p->opcode = *p->addr; return 0; @@ -77,6 +82,13 @@ void __kprobes arch_disarm_kprobe(struct kprobe *p) (unsigned long) p->addr + sizeof(kprobe_opcode_t)); } +void __kprobes arch_remove_kprobe(struct kprobe *p) +{ + down(&kprobe_mutex); + free_insn_slot(p->ainsn.insn); + up(&kprobe_mutex); +} + static inline void save_previous_kprobe(struct kprobe_ctlblk *kcb) { kcb->prev_kprobe.kp = kprobe_running(); @@ -111,7 +123,7 @@ static inline void prepare_singlestep(struct kprobe *p, struct pt_regs *regs) if (p->opcode == BREAKPOINT_INSTRUCTION) regs->eip = (unsigned long)p->addr; else - regs->eip = (unsigned long)&p->ainsn.insn; + regs->eip = (unsigned long)p->ainsn.insn; } /* Called with kretprobe_lock held */ @@ -351,7 +363,7 @@ static void __kprobes resume_execution(struct kprobe *p, { unsigned long *tos = (unsigned long *)®s->esp; unsigned long next_eip = 0; - unsigned long copy_eip = (unsigned long)&p->ainsn.insn; + unsigned long copy_eip = (unsigned long)p->ainsn.insn; unsigned long orig_eip = (unsigned long)p->addr; switch (p->ainsn.insn[0]) { diff --git a/arch/i386/kernel/mpparse.c b/arch/i386/kernel/mpparse.c index e7609ab..e6e2f43 100644 --- a/arch/i386/kernel/mpparse.c +++ b/arch/i386/kernel/mpparse.c @@ -915,6 +915,7 @@ void __init mp_register_ioapic ( u32 gsi_base) { int idx = 0; + int tmpid; if (nr_ioapics >= MAX_IO_APICS) { printk(KERN_ERR "ERROR: Max # of I/O APICs (%d) exceeded " @@ -935,9 +936,14 @@ void __init mp_register_ioapic ( set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address); if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) && (boot_cpu_data.x86 < 15)) - mp_ioapics[idx].mpc_apicid = io_apic_get_unique_id(idx, id); + tmpid = io_apic_get_unique_id(idx, id); else - mp_ioapics[idx].mpc_apicid = id; + tmpid = id; + if (tmpid == -1) { + nr_ioapics--; + return; + } + mp_ioapics[idx].mpc_apicid = tmpid; mp_ioapics[idx].mpc_apicver = io_apic_get_version(idx); /* diff --git a/arch/i386/kernel/smpboot.c b/arch/i386/kernel/smpboot.c index fb00ab7..eba7f53 100644 --- a/arch/i386/kernel/smpboot.c +++ b/arch/i386/kernel/smpboot.c @@ -898,12 +898,6 @@ static int __devinit do_boot_cpu(int apicid, int cpu) unsigned long start_eip; unsigned short nmi_high = 0, nmi_low = 0; - if (!cpu_gdt_descr[cpu].address && - !(cpu_gdt_descr[cpu].address = get_zeroed_page(GFP_KERNEL))) { - printk("Failed to allocate GDT for CPU %d\n", cpu); - return 1; - } - ++cpucount; /* diff --git a/arch/i386/mach-default/topology.c b/arch/i386/kernel/topology.c index b643140..67a0e1b 100644 --- a/arch/i386/mach-default/topology.c +++ b/arch/i386/kernel/topology.c @@ -1,12 +1,12 @@ /* - * arch/i386/mach-generic/topology.c - Populate driverfs with topology information + * arch/i386/kernel/topology.c - Populate driverfs with topology information * * Written by: Matthew Dobson, IBM Corporation * Original Code: Paul Dorwin, IBM Corporation, Patrick Mochel, OSDL * * Copyright (C) 2002, IBM Corp. * - * All rights reserved. + * All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -34,7 +34,7 @@ static struct i386_cpu cpu_devices[NR_CPUS]; int arch_register_cpu(int num){ struct node *parent = NULL; - + #ifdef CONFIG_NUMA int node = cpu_to_node(num); if (node_online(node)) diff --git a/arch/i386/mach-default/Makefile b/arch/i386/mach-default/Makefile index e95bb02..012fe34 100644 --- a/arch/i386/mach-default/Makefile +++ b/arch/i386/mach-default/Makefile @@ -2,4 +2,4 @@ # Makefile for the linux kernel. # -obj-y := setup.o topology.o +obj-y := setup.o diff --git a/arch/i386/mach-voyager/voyager_basic.c b/arch/i386/mach-voyager/voyager_basic.c index aa49a33..b584060 100644 --- a/arch/i386/mach-voyager/voyager_basic.c +++ b/arch/i386/mach-voyager/voyager_basic.c @@ -23,6 +23,8 @@ #include <linux/delay.h> #include <linux/reboot.h> #include <linux/sysrq.h> +#include <linux/smp.h> +#include <linux/nodemask.h> #include <asm/io.h> #include <asm/voyager.h> #include <asm/vic.h> @@ -328,4 +330,3 @@ void machine_power_off(void) if (pm_power_off) pm_power_off(); } - diff --git a/arch/i386/mach-voyager/voyager_smp.c b/arch/i386/mach-voyager/voyager_smp.c index 6e4c3ba..8165626 100644 --- a/arch/i386/mach-voyager/voyager_smp.c +++ b/arch/i386/mach-voyager/voyager_smp.c @@ -402,6 +402,7 @@ find_smp_config(void) cpus_addr(phys_cpu_present_map)[0] |= voyager_extended_cmos_read(VOYAGER_PROCESSOR_PRESENT_MASK + 1) << 8; cpus_addr(phys_cpu_present_map)[0] |= voyager_extended_cmos_read(VOYAGER_PROCESSOR_PRESENT_MASK + 2) << 16; cpus_addr(phys_cpu_present_map)[0] |= voyager_extended_cmos_read(VOYAGER_PROCESSOR_PRESENT_MASK + 3) << 24; + cpu_possible_map = phys_cpu_present_map; printk("VOYAGER SMP: phys_cpu_present_map = 0x%lx\n", cpus_addr(phys_cpu_present_map)[0]); /* Here we set up the VIC to enable SMP */ /* enable the CPIs by writing the base vector to their register */ diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index 845cd09..a85ea9d 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -453,6 +453,7 @@ source "arch/ia64/oprofile/Kconfig" config KPROBES bool "Kprobes (EXPERIMENTAL)" + depends on EXPERIMENTAL && MODULES help Kprobes allows you to trap at almost any kernel address and execute a callback function. register_kprobe() establishes diff --git a/arch/m32r/Makefile b/arch/m32r/Makefile index 983d438..4b3c90b 100644 --- a/arch/m32r/Makefile +++ b/arch/m32r/Makefile @@ -12,14 +12,14 @@ CFLAGS_MODULE += -mmodel=large ifdef CONFIG_CHIP_VDEC2 cflags-$(CONFIG_ISA_M32R2) += -DNO_FPU -Wa,-bitinst -aflags-$(CONFIG_ISA_M32R2) += -DNO_FPU -Wa,-bitinst +aflags-$(CONFIG_ISA_M32R2) += -DNO_FPU -O2 -Wa,-bitinst -Wa,-no-parallel else cflags-$(CONFIG_ISA_M32R2) += -DNO_FPU -m32r2 -aflags-$(CONFIG_ISA_M32R2) += -DNO_FPU -m32r2 +aflags-$(CONFIG_ISA_M32R2) += -DNO_FPU -m32r2 -O2 endif cflags-$(CONFIG_ISA_M32R) += -DNO_FPU -aflags-$(CONFIG_ISA_M32R) += -DNO_FPU -Wa,-no-bitinst +aflags-$(CONFIG_ISA_M32R) += -DNO_FPU -O2 -Wa,-no-bitinst CFLAGS += $(cflags-y) AFLAGS += $(aflags-y) diff --git a/arch/m32r/kernel/signal.c b/arch/m32r/kernel/signal.c index 71763f7..cb33097 100644 --- a/arch/m32r/kernel/signal.c +++ b/arch/m32r/kernel/signal.c @@ -36,7 +36,7 @@ int do_signal(struct pt_regs *, sigset_t *); asmlinkage int sys_rt_sigsuspend(sigset_t *unewset, size_t sigsetsize, unsigned long r2, unsigned long r3, unsigned long r4, - unsigned long r5, unsigned long r6, struct pt_regs regs) + unsigned long r5, unsigned long r6, struct pt_regs *regs) { sigset_t saveset, newset; @@ -54,21 +54,21 @@ sys_rt_sigsuspend(sigset_t *unewset, size_t sigsetsize, recalc_sigpending(); spin_unlock_irq(¤t->sighand->siglock); - regs.r0 = -EINTR; + regs->r0 = -EINTR; while (1) { current->state = TASK_INTERRUPTIBLE; schedule(); - if (do_signal(®s, &saveset)) - return regs.r0; + if (do_signal(regs, &saveset)) + return regs->r0; } } asmlinkage int sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss, unsigned long r2, unsigned long r3, unsigned long r4, - unsigned long r5, unsigned long r6, struct pt_regs regs) + unsigned long r5, unsigned long r6, struct pt_regs *regs) { - return do_sigaltstack(uss, uoss, regs.spu); + return do_sigaltstack(uss, uoss, regs->spu); } @@ -140,11 +140,10 @@ restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc, asmlinkage int sys_rt_sigreturn(unsigned long r0, unsigned long r1, unsigned long r2, unsigned long r3, unsigned long r4, - unsigned long r5, unsigned long r6, struct pt_regs regs) + unsigned long r5, unsigned long r6, struct pt_regs *regs) { - struct rt_sigframe __user *frame = (struct rt_sigframe __user *)regs.spu; + struct rt_sigframe __user *frame = (struct rt_sigframe __user *)regs->spu; sigset_t set; - stack_t st; int result; if (!access_ok(VERIFY_READ, frame, sizeof(*frame))) @@ -158,14 +157,11 @@ sys_rt_sigreturn(unsigned long r0, unsigned long r1, recalc_sigpending(); spin_unlock_irq(¤t->sighand->siglock); - if (restore_sigcontext(®s, &frame->uc.uc_mcontext, &result)) + if (restore_sigcontext(regs, &frame->uc.uc_mcontext, &result)) goto badframe; - if (__copy_from_user(&st, &frame->uc.uc_stack, sizeof(st))) + if (do_sigaltstack(&frame->uc.uc_stack, NULL, regs->spu) == -EFAULT) goto badframe; - /* It is more difficult to avoid calling this function than to - call it and ignore errors. */ - do_sigaltstack(&st, NULL, regs.spu); return result; diff --git a/arch/m32r/lib/usercopy.c b/arch/m32r/lib/usercopy.c index ce16bbe..2d1dd21 100644 --- a/arch/m32r/lib/usercopy.c +++ b/arch/m32r/lib/usercopy.c @@ -64,7 +64,7 @@ do { \ " .balign 4\n" \ " .long 0b,3b\n" \ ".previous" \ - : "=r"(res), "=r"(count), "=&r" (__d0), "=&r" (__d1), \ + : "=&r"(res), "=&r"(count), "=&r" (__d0), "=&r" (__d1), \ "=&r" (__d2) \ : "i"(-EFAULT), "0"(count), "1"(count), "3"(src), \ "4"(dst) \ @@ -101,7 +101,7 @@ do { \ " .balign 4\n" \ " .long 0b,3b\n" \ ".previous" \ - : "=r"(res), "=r"(count), "=&r" (__d0), "=&r" (__d1), \ + : "=&r"(res), "=&r"(count), "=&r" (__d0), "=&r" (__d1), \ "=&r" (__d2) \ : "i"(-EFAULT), "0"(count), "1"(count), "3"(src), \ "4"(dst) \ diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S index d83e033..2f2dc54 100644 --- a/arch/mips/kernel/scall32-o32.S +++ b/arch/mips/kernel/scall32-o32.S @@ -626,7 +626,7 @@ einval: li v0, -EINVAL sys sys_fstatat64 4 sys sys_unlinkat 3 sys sys_renameat 4 /* 4295 */ - sys sys_linkat 4 + sys sys_linkat 5 sys sys_symlinkat 3 sys sys_readlinkat 4 sys sys_fchmodat 3 diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 80d114a..a834f9e 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -963,7 +963,7 @@ source "arch/powerpc/oprofile/Kconfig" config KPROBES bool "Kprobes (EXPERIMENTAL)" - depends on PPC64 + depends on PPC64 && EXPERIMENTAL && MODULES help Kprobes allows you to trap at almost any kernel address and execute a callback function. register_kprobe() establishes diff --git a/arch/powerpc/configs/g5_defconfig b/arch/powerpc/configs/g5_defconfig index d6fed3f..2c3fd20 100644 --- a/arch/powerpc/configs/g5_defconfig +++ b/arch/powerpc/configs/g5_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.15-rc5 -# Tue Dec 20 15:59:30 2005 +# Linux kernel version: 2.6.16-rc2 +# Fri Feb 10 17:33:08 2006 # CONFIG_PPC64=y CONFIG_64BIT=y @@ -16,6 +16,10 @@ CONFIG_COMPAT=y CONFIG_SYSVIPC_COMPAT=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +# CONFIG_PPC_UDBG_16550 is not set +CONFIG_GENERIC_TBSYNC=y +# CONFIG_DEFAULT_UIMAGE is not set # # Processor support @@ -26,13 +30,12 @@ CONFIG_PPC_FPU=y CONFIG_ALTIVEC=y CONFIG_PPC_STD_MMU=y CONFIG_SMP=y -CONFIG_NR_CPUS=2 +CONFIG_NR_CPUS=4 # # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -47,8 +50,6 @@ CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y # CONFIG_CPUSETS is not set @@ -58,8 +59,10 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -68,8 +71,10 @@ CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -112,13 +117,12 @@ CONFIG_PPC_PMAC=y CONFIG_PPC_PMAC64=y # CONFIG_PPC_MAPLE is not set # CONFIG_PPC_CELL is not set -CONFIG_PPC_OF=y CONFIG_U3_DART=y CONFIG_MPIC=y # CONFIG_PPC_RTAS is not set # CONFIG_MMIO_NVRAM is not set +CONFIG_MPIC_BROKEN_U3=y # CONFIG_PPC_MPC106 is not set -CONFIG_GENERIC_TBSYNC=y CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_TABLE=y # CONFIG_CPU_FREQ_DEBUG is not set @@ -151,6 +155,7 @@ CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_IOMMU_VMERGE=y # CONFIG_HOTPLUG_CPU is not set CONFIG_KEXEC=y +# CONFIG_CRASH_DUMP is not set CONFIG_IRQ_ALL_CPUS=y # CONFIG_NUMA is not set CONFIG_ARCH_SELECT_MEMORY_MODEL=y @@ -202,6 +207,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -239,6 +245,7 @@ CONFIG_NETFILTER=y # Core Netfilter Configuration # # CONFIG_NETFILTER_NETLINK is not set +# CONFIG_NETFILTER_XTABLES is not set # # IP: Netfilter Configuration @@ -255,65 +262,6 @@ CONFIG_IP_NF_TFTP=m CONFIG_IP_NF_AMANDA=m # CONFIG_IP_NF_PPTP is not set CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m -CONFIG_IP_NF_MATCH_REALM=m -CONFIG_IP_NF_MATCH_SCTP=m -# CONFIG_IP_NF_MATCH_DCCP is not set -CONFIG_IP_NF_MATCH_COMMENT=m -CONFIG_IP_NF_MATCH_CONNMARK=m -CONFIG_IP_NF_MATCH_CONNBYTES=m -CONFIG_IP_NF_MATCH_HASHLIMIT=m -CONFIG_IP_NF_MATCH_STRING=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_TARGET_NFQUEUE=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_SAME=m -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_NAT_TFTP=m -CONFIG_IP_NF_NAT_AMANDA=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_DSCP=m -CONFIG_IP_NF_TARGET_MARK=m -CONFIG_IP_NF_TARGET_CLASSIFY=m -CONFIG_IP_NF_TARGET_TTL=m -CONFIG_IP_NF_TARGET_CONNMARK=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m -CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_TARGET_NOTRACK=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_ARP_MANGLE=m # # DCCP Configuration (EXPERIMENTAL) @@ -324,6 +272,11 @@ CONFIG_IP_NF_ARP_MANGLE=m # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -342,7 +295,6 @@ CONFIG_LLC=y # QoS and/or fair queueing # # CONFIG_NET_SCHED is not set -CONFIG_NET_CLS_ROUTE=y # # Network testing @@ -545,13 +497,7 @@ CONFIG_SCSI_SATA_SVW=y # CONFIG_SCSI_IPR is not set # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set -CONFIG_SCSI_QLA2XXX=y -# CONFIG_SCSI_QLA21XX is not set -# CONFIG_SCSI_QLA22XX is not set -# CONFIG_SCSI_QLA2300 is not set -# CONFIG_SCSI_QLA2322 is not set -# CONFIG_SCSI_QLA6312 is not set -# CONFIG_SCSI_QLA24XX is not set +# CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set @@ -614,7 +560,6 @@ CONFIG_IEEE1394_SBP2=m CONFIG_IEEE1394_ETH1394=m CONFIG_IEEE1394_DV1394=m CONFIG_IEEE1394_RAWIO=y -# CONFIG_IEEE1394_CMP is not set # # I2O device support @@ -630,6 +575,7 @@ CONFIG_THERM_PM72=y CONFIG_WINDFARM=y CONFIG_WINDFARM_PM81=y CONFIG_WINDFARM_PM91=y +CONFIG_WINDFARM_PM112=y # # Network device support @@ -682,8 +628,9 @@ CONFIG_E1000=y # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set +# CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set -CONFIG_TIGON3=m +CONFIG_TIGON3=y # CONFIG_BNX2 is not set # CONFIG_MV643XX_ETH is not set @@ -861,8 +808,7 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set # CONFIG_I2C_PIIX4 is not set -CONFIG_I2C_KEYWEST=y -CONFIG_I2C_PMAC_SMU=y +CONFIG_I2C_POWERMAC=y # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_PROSAVAGE is not set @@ -895,6 +841,12 @@ CONFIG_I2C_PMAC_SMU=y # CONFIG_I2C_DEBUG_CHIP is not set # +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# # Dallas's 1-wire bus # # CONFIG_W1 is not set @@ -961,7 +913,6 @@ CONFIG_FB_RADEON_I2C=y # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set -# CONFIG_FB_CYBLA is not set # CONFIG_FB_TRIDENT is not set # CONFIG_FB_VIRTUAL is not set @@ -1008,9 +959,10 @@ CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=m CONFIG_SND_PCM_OSS=m CONFIG_SND_SEQUENCER_OSS=y +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set -CONFIG_SND_GENERIC_DRIVER=y # # Generic devices @@ -1024,6 +976,8 @@ CONFIG_SND_GENERIC_DRIVER=y # # PCI devices # +# CONFIG_SND_AD1889 is not set +# CONFIG_SND_ALS4000 is not set # CONFIG_SND_ALI5451 is not set # CONFIG_SND_ATIIXP is not set # CONFIG_SND_ATIIXP_MODEM is not set @@ -1032,39 +986,38 @@ CONFIG_SND_GENERIC_DRIVER=y # CONFIG_SND_AU8830 is not set # CONFIG_SND_AZT3328 is not set # CONFIG_SND_BT87X is not set -# CONFIG_SND_CS46XX is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_CMIPCI is not set # CONFIG_SND_CS4281 is not set +# CONFIG_SND_CS46XX is not set # CONFIG_SND_EMU10K1 is not set # CONFIG_SND_EMU10K1X is not set -# CONFIG_SND_CA0106 is not set -# CONFIG_SND_KORG1212 is not set -# CONFIG_SND_MIXART is not set -# CONFIG_SND_NM256 is not set -# CONFIG_SND_RME32 is not set -# CONFIG_SND_RME96 is not set -# CONFIG_SND_RME9652 is not set -# CONFIG_SND_HDSP is not set -# CONFIG_SND_HDSPM is not set -# CONFIG_SND_TRIDENT is not set -# CONFIG_SND_YMFPCI is not set -# CONFIG_SND_AD1889 is not set -# CONFIG_SND_ALS4000 is not set -# CONFIG_SND_CMIPCI is not set # CONFIG_SND_ENS1370 is not set # CONFIG_SND_ENS1371 is not set # CONFIG_SND_ES1938 is not set # CONFIG_SND_ES1968 is not set -# CONFIG_SND_MAESTRO3 is not set # CONFIG_SND_FM801 is not set +# CONFIG_SND_HDA_INTEL is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set # CONFIG_SND_ICE1712 is not set # CONFIG_SND_ICE1724 is not set # CONFIG_SND_INTEL8X0 is not set # CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_MAESTRO3 is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_PCXHR is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set # CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_TRIDENT is not set # CONFIG_SND_VIA82XX is not set # CONFIG_SND_VIA82XX_MODEM is not set # CONFIG_SND_VX222 is not set -# CONFIG_SND_HDA_INTEL is not set +# CONFIG_SND_YMFPCI is not set # # ALSA PowerMac devices @@ -1136,13 +1089,16 @@ CONFIG_USB_STORAGE_DPCM=y CONFIG_USB_STORAGE_SDDR09=y CONFIG_USB_STORAGE_SDDR55=y CONFIG_USB_STORAGE_JUMPSHOT=y +# CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_LIBUSUAL is not set # # USB Input Devices # CONFIG_USB_HID=y CONFIG_USB_HIDINPUT=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set CONFIG_HID_FF=y CONFIG_HID_PID=y CONFIG_LOGITECH_FF=y @@ -1159,6 +1115,7 @@ CONFIG_USB_HIDDEV=y # CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_ATI_REMOTE2 is not set # CONFIG_USB_KEYSPAN_REMOTE is not set # CONFIG_USB_APPLETOUCH is not set @@ -1207,6 +1164,7 @@ CONFIG_USB_SERIAL_GENERIC=y # CONFIG_USB_SERIAL_AIRPRIME is not set # CONFIG_USB_SERIAL_ANYDATA is not set CONFIG_USB_SERIAL_BELKIN=m +# CONFIG_USB_SERIAL_WHITEHEAT is not set CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m # CONFIG_USB_SERIAL_CP2101 is not set CONFIG_USB_SERIAL_CYPRESS_M8=m @@ -1288,6 +1246,10 @@ CONFIG_USB_EZUSB=y # # +# EDAC - error detection and reporting (RAS) +# + +# # File systems # CONFIG_EXT2_FS=y @@ -1317,6 +1279,7 @@ CONFIG_XFS_EXPORT=y CONFIG_XFS_SECURITY=y CONFIG_XFS_POSIX_ACL=y # CONFIG_XFS_RT is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y @@ -1357,6 +1320,7 @@ CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_RAMFS=y # CONFIG_RELAYFS_FS is not set +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -1426,6 +1390,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SGI_PARTITION is not set # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set # @@ -1481,10 +1446,6 @@ CONFIG_CRC32=y CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m -CONFIG_TEXTSEARCH=y -CONFIG_TEXTSEARCH_KMP=m -CONFIG_TEXTSEARCH_BM=m -CONFIG_TEXTSEARCH_FSM=m # # Instrumentation Support @@ -1497,24 +1458,31 @@ CONFIG_OPROFILE=y # Kernel hacking # # CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=17 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set CONFIG_DEBUG_FS=y # CONFIG_DEBUG_VM is not set +CONFIG_FORCED_INLINING=y # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUGGER is not set CONFIG_IRQSTACKS=y CONFIG_BOOTX_TEXT=y +# CONFIG_PPC_EARLY_DEBUG_LPAR is not set +# CONFIG_PPC_EARLY_DEBUG_G5 is not set +# CONFIG_PPC_EARLY_DEBUG_RTAS is not set +# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set +# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set # # Security options diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig index 6f6c6be..0362a70 100644 --- a/arch/powerpc/configs/ppc64_defconfig +++ b/arch/powerpc/configs/ppc64_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.15-rc5 -# Tue Dec 20 15:59:38 2005 +# Linux kernel version: 2.6.16-rc2 +# Fri Feb 10 17:32:14 2006 # CONFIG_PPC64=y CONFIG_64BIT=y @@ -16,6 +16,10 @@ CONFIG_COMPAT=y CONFIG_SYSVIPC_COMPAT=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +CONFIG_PPC_UDBG_16550=y +CONFIG_GENERIC_TBSYNC=y +# CONFIG_DEFAULT_UIMAGE is not set # # Processor support @@ -33,7 +37,6 @@ CONFIG_NR_CPUS=32 # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -48,8 +51,6 @@ CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_CPUSETS=y @@ -59,8 +60,10 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -69,8 +72,10 @@ CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -113,7 +118,6 @@ CONFIG_PPC_PMAC=y CONFIG_PPC_PMAC64=y CONFIG_PPC_MAPLE=y # CONFIG_PPC_CELL is not set -CONFIG_PPC_OF=y CONFIG_XICS=y CONFIG_U3_DART=y CONFIG_MPIC=y @@ -124,8 +128,8 @@ CONFIG_RTAS_FLASH=m # CONFIG_MMIO_NVRAM is not set CONFIG_MPIC_BROKEN_U3=y CONFIG_IBMVIO=y +# CONFIG_IBMEBUS is not set # CONFIG_PPC_MPC106 is not set -CONFIG_GENERIC_TBSYNC=y CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_TABLE=y # CONFIG_CPU_FREQ_DEBUG is not set @@ -158,6 +162,7 @@ CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_IOMMU_VMERGE=y CONFIG_HOTPLUG_CPU=y CONFIG_KEXEC=y +# CONFIG_CRASH_DUMP is not set CONFIG_IRQ_ALL_CPUS=y CONFIG_PPC_SPLPAR=y CONFIG_EEH=y @@ -178,6 +183,7 @@ CONFIG_HAVE_MEMORY_PRESENT=y CONFIG_SPARSEMEM_EXTREME=y # CONFIG_MEMORY_HOTPLUG is not set CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y # CONFIG_PPC_64K_PAGES is not set # CONFIG_SCHED_SMT is not set CONFIG_PROC_DEVICETREE=y @@ -221,6 +227,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -260,6 +267,7 @@ CONFIG_NETFILTER=y CONFIG_NETFILTER_NETLINK=y CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m +# CONFIG_NETFILTER_XTABLES is not set # # IP: Netfilter Configuration @@ -277,65 +285,6 @@ CONFIG_IP_NF_TFTP=m CONFIG_IP_NF_AMANDA=m # CONFIG_IP_NF_PPTP is not set CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m -CONFIG_IP_NF_MATCH_REALM=m -CONFIG_IP_NF_MATCH_SCTP=m -CONFIG_IP_NF_MATCH_DCCP=m -CONFIG_IP_NF_MATCH_COMMENT=m -CONFIG_IP_NF_MATCH_CONNMARK=m -CONFIG_IP_NF_MATCH_CONNBYTES=m -CONFIG_IP_NF_MATCH_HASHLIMIT=m -CONFIG_IP_NF_MATCH_STRING=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_TARGET_NFQUEUE=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_SAME=m -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_NAT_TFTP=m -CONFIG_IP_NF_NAT_AMANDA=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_DSCP=m -CONFIG_IP_NF_TARGET_MARK=m -CONFIG_IP_NF_TARGET_CLASSIFY=m -CONFIG_IP_NF_TARGET_TTL=m -CONFIG_IP_NF_TARGET_CONNMARK=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m -CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_TARGET_NOTRACK=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_ARP_MANGLE=m # # DCCP Configuration (EXPERIMENTAL) @@ -346,6 +295,11 @@ CONFIG_IP_NF_ARP_MANGLE=m # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -364,7 +318,6 @@ CONFIG_LLC=y # QoS and/or fair queueing # # CONFIG_NET_SCHED is not set -CONFIG_NET_CLS_ROUTE=y # # Network testing @@ -572,13 +525,7 @@ CONFIG_SCSI_IPR_TRACE=y CONFIG_SCSI_IPR_DUMP=y # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set -CONFIG_SCSI_QLA2XXX=y -CONFIG_SCSI_QLA21XX=m -CONFIG_SCSI_QLA22XX=m -CONFIG_SCSI_QLA2300=m -CONFIG_SCSI_QLA2322=m -CONFIG_SCSI_QLA6312=m -CONFIG_SCSI_QLA24XX=m +# CONFIG_SCSI_QLA_FC is not set CONFIG_SCSI_LPFC=m # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set @@ -642,8 +589,6 @@ CONFIG_IEEE1394_SBP2=m CONFIG_IEEE1394_ETH1394=m CONFIG_IEEE1394_DV1394=m CONFIG_IEEE1394_RAWIO=y -CONFIG_IEEE1394_CMP=m -CONFIG_IEEE1394_AMDTP=m # # I2O device support @@ -659,6 +604,7 @@ CONFIG_THERM_PM72=y CONFIG_WINDFARM=y CONFIG_WINDFARM_PM81=y CONFIG_WINDFARM_PM91=y +CONFIG_WINDFARM_PM112=y # # Network device support @@ -731,6 +677,7 @@ CONFIG_E1000=y # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set +# CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=y @@ -853,6 +800,7 @@ CONFIG_HW_CONSOLE=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set # @@ -880,6 +828,7 @@ CONFIG_HVCS=m # CONFIG_WATCHDOG is not set # CONFIG_RTC is not set CONFIG_GEN_RTC=y +# CONFIG_GEN_RTC_X is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -923,8 +872,7 @@ CONFIG_I2C_AMD8111=y # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set # CONFIG_I2C_PIIX4 is not set -CONFIG_I2C_KEYWEST=y -CONFIG_I2C_PMAC_SMU=y +CONFIG_I2C_POWERMAC=y # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_PROSAVAGE is not set @@ -957,6 +905,12 @@ CONFIG_I2C_PMAC_SMU=y # CONFIG_I2C_DEBUG_CHIP is not set # +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# # Dallas's 1-wire bus # # CONFIG_W1 is not set @@ -1028,7 +982,6 @@ CONFIG_FB_RADEON_I2C=y # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set -# CONFIG_FB_CYBLA is not set # CONFIG_FB_TRIDENT is not set # CONFIG_FB_VIRTUAL is not set @@ -1073,9 +1026,10 @@ CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=m CONFIG_SND_PCM_OSS=m CONFIG_SND_SEQUENCER_OSS=y +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set -CONFIG_SND_GENERIC_DRIVER=y # # Generic devices @@ -1089,6 +1043,8 @@ CONFIG_SND_GENERIC_DRIVER=y # # PCI devices # +# CONFIG_SND_AD1889 is not set +# CONFIG_SND_ALS4000 is not set # CONFIG_SND_ALI5451 is not set # CONFIG_SND_ATIIXP is not set # CONFIG_SND_ATIIXP_MODEM is not set @@ -1097,39 +1053,38 @@ CONFIG_SND_GENERIC_DRIVER=y # CONFIG_SND_AU8830 is not set # CONFIG_SND_AZT3328 is not set # CONFIG_SND_BT87X is not set -# CONFIG_SND_CS46XX is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_CMIPCI is not set # CONFIG_SND_CS4281 is not set +# CONFIG_SND_CS46XX is not set # CONFIG_SND_EMU10K1 is not set # CONFIG_SND_EMU10K1X is not set -# CONFIG_SND_CA0106 is not set -# CONFIG_SND_KORG1212 is not set -# CONFIG_SND_MIXART is not set -# CONFIG_SND_NM256 is not set -# CONFIG_SND_RME32 is not set -# CONFIG_SND_RME96 is not set -# CONFIG_SND_RME9652 is not set -# CONFIG_SND_HDSP is not set -# CONFIG_SND_HDSPM is not set -# CONFIG_SND_TRIDENT is not set -# CONFIG_SND_YMFPCI is not set -# CONFIG_SND_AD1889 is not set -# CONFIG_SND_ALS4000 is not set -# CONFIG_SND_CMIPCI is not set # CONFIG_SND_ENS1370 is not set # CONFIG_SND_ENS1371 is not set # CONFIG_SND_ES1938 is not set # CONFIG_SND_ES1968 is not set -# CONFIG_SND_MAESTRO3 is not set # CONFIG_SND_FM801 is not set +# CONFIG_SND_HDA_INTEL is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set # CONFIG_SND_ICE1712 is not set # CONFIG_SND_ICE1724 is not set # CONFIG_SND_INTEL8X0 is not set # CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_MAESTRO3 is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_PCXHR is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set # CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_TRIDENT is not set # CONFIG_SND_VIA82XX is not set # CONFIG_SND_VIA82XX_MODEM is not set # CONFIG_SND_VX222 is not set -# CONFIG_SND_HDA_INTEL is not set +# CONFIG_SND_YMFPCI is not set # # ALSA PowerMac devices @@ -1201,13 +1156,16 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_LIBUSUAL is not set # # USB Input Devices # CONFIG_USB_HID=y CONFIG_USB_HIDINPUT=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set # CONFIG_HID_FF is not set CONFIG_USB_HIDDEV=y # CONFIG_USB_AIPTEK is not set @@ -1221,6 +1179,7 @@ CONFIG_USB_HIDDEV=y # CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_ATI_REMOTE2 is not set # CONFIG_USB_KEYSPAN_REMOTE is not set # CONFIG_USB_APPLETOUCH is not set @@ -1307,6 +1266,10 @@ CONFIG_INFINIBAND_IPOIB=m # # +# EDAC - error detection and reporting (RAS) +# + +# # File systems # CONFIG_EXT2_FS=y @@ -1340,6 +1303,7 @@ CONFIG_XFS_EXPORT=y CONFIG_XFS_SECURITY=y CONFIG_XFS_POSIX_ACL=y # CONFIG_XFS_RT is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y @@ -1379,6 +1343,7 @@ CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_RAMFS=y # CONFIG_RELAYFS_FS is not set +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -1449,6 +1414,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SGI_PARTITION is not set # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set # @@ -1504,10 +1470,6 @@ CONFIG_CRC32=y CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m -CONFIG_TEXTSEARCH=y -CONFIG_TEXTSEARCH_KMP=m -CONFIG_TEXTSEARCH_BM=m -CONFIG_TEXTSEARCH_FSM=m # # Instrumentation Support @@ -1520,18 +1482,20 @@ CONFIG_OPROFILE=y # Kernel hacking # # CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=17 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set CONFIG_DEBUG_FS=y # CONFIG_DEBUG_VM is not set +CONFIG_FORCED_INLINING=y # CONFIG_RCU_TORTURE_TEST is not set CONFIG_DEBUG_STACKOVERFLOW=y CONFIG_DEBUG_STACK_USAGE=y @@ -1540,6 +1504,11 @@ CONFIG_XMON=y # CONFIG_XMON_DEFAULT is not set CONFIG_IRQSTACKS=y CONFIG_BOOTX_TEXT=y +# CONFIG_PPC_EARLY_DEBUG_LPAR is not set +# CONFIG_PPC_EARLY_DEBUG_G5 is not set +# CONFIG_PPC_EARLY_DEBUG_RTAS is not set +# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set +# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set # # Security options diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig index aa9893a..daaf038 100644 --- a/arch/powerpc/configs/pseries_defconfig +++ b/arch/powerpc/configs/pseries_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.15-rc5 -# Tue Dec 20 15:59:40 2005 +# Linux kernel version: 2.6.16-rc2 +# Fri Feb 10 17:33:32 2006 # CONFIG_PPC64=y CONFIG_64BIT=y @@ -16,6 +16,10 @@ CONFIG_COMPAT=y CONFIG_SYSVIPC_COMPAT=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +CONFIG_PPC_UDBG_16550=y +# CONFIG_GENERIC_TBSYNC is not set +# CONFIG_DEFAULT_UIMAGE is not set # # Processor support @@ -33,7 +37,6 @@ CONFIG_NR_CPUS=128 # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 @@ -49,8 +52,6 @@ CONFIG_POSIX_MQUEUE=y CONFIG_SYSCTL=y CONFIG_AUDIT=y CONFIG_AUDITSYSCALL=y -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_CPUSETS=y @@ -60,8 +61,10 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -70,8 +73,10 @@ CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support @@ -113,7 +118,6 @@ CONFIG_PPC_PSERIES=y # CONFIG_PPC_PMAC is not set # CONFIG_PPC_MAPLE is not set # CONFIG_PPC_CELL is not set -CONFIG_PPC_OF=y CONFIG_XICS=y # CONFIG_U3_DART is not set CONFIG_MPIC=y @@ -123,8 +127,8 @@ CONFIG_RTAS_PROC=y CONFIG_RTAS_FLASH=m # CONFIG_MMIO_NVRAM is not set CONFIG_IBMVIO=y +# CONFIG_IBMEBUS is not set # CONFIG_PPC_MPC106 is not set -# CONFIG_GENERIC_TBSYNC is not set # CONFIG_CPU_FREQ is not set # CONFIG_WANT_EARLY_SERIAL is not set @@ -145,6 +149,7 @@ CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_IOMMU_VMERGE=y CONFIG_HOTPLUG_CPU=y CONFIG_KEXEC=y +# CONFIG_CRASH_DUMP is not set CONFIG_IRQ_ALL_CPUS=y CONFIG_PPC_SPLPAR=y CONFIG_EEH=y @@ -165,6 +170,7 @@ CONFIG_HAVE_MEMORY_PRESENT=y CONFIG_SPARSEMEM_EXTREME=y # CONFIG_MEMORY_HOTPLUG is not set CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y # CONFIG_PPC_64K_PAGES is not set CONFIG_SCHED_SMT=y @@ -209,6 +215,7 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -248,6 +255,7 @@ CONFIG_NETFILTER=y CONFIG_NETFILTER_NETLINK=y CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m +# CONFIG_NETFILTER_XTABLES is not set # # IP: Netfilter Configuration @@ -265,65 +273,6 @@ CONFIG_IP_NF_TFTP=m CONFIG_IP_NF_AMANDA=m # CONFIG_IP_NF_PPTP is not set CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m -CONFIG_IP_NF_MATCH_REALM=m -CONFIG_IP_NF_MATCH_SCTP=m -# CONFIG_IP_NF_MATCH_DCCP is not set -CONFIG_IP_NF_MATCH_COMMENT=m -CONFIG_IP_NF_MATCH_CONNMARK=m -CONFIG_IP_NF_MATCH_CONNBYTES=m -CONFIG_IP_NF_MATCH_HASHLIMIT=m -CONFIG_IP_NF_MATCH_STRING=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_TARGET_NFQUEUE=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_SAME=m -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_NAT_TFTP=m -CONFIG_IP_NF_NAT_AMANDA=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_DSCP=m -CONFIG_IP_NF_TARGET_MARK=m -CONFIG_IP_NF_TARGET_CLASSIFY=m -CONFIG_IP_NF_TARGET_TTL=m -CONFIG_IP_NF_TARGET_CONNMARK=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m -CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_TARGET_NOTRACK=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_ARP_MANGLE=m # # DCCP Configuration (EXPERIMENTAL) @@ -334,6 +283,11 @@ CONFIG_IP_NF_ARP_MANGLE=m # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -352,7 +306,6 @@ CONFIG_LLC=y # QoS and/or fair queueing # # CONFIG_NET_SCHED is not set -CONFIG_NET_CLS_ROUTE=y # # Network testing @@ -550,13 +503,7 @@ CONFIG_SCSI_IPR_TRACE=y CONFIG_SCSI_IPR_DUMP=y # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set -CONFIG_SCSI_QLA2XXX=y -CONFIG_SCSI_QLA21XX=m -CONFIG_SCSI_QLA22XX=m -CONFIG_SCSI_QLA2300=m -CONFIG_SCSI_QLA2322=m -CONFIG_SCSI_QLA6312=m -CONFIG_SCSI_QLA24XX=m +# CONFIG_SCSI_QLA_FC is not set CONFIG_SCSI_LPFC=m # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set @@ -678,6 +625,7 @@ CONFIG_E1000=y # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set +# CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=y @@ -803,6 +751,7 @@ CONFIG_HW_CONSOLE=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set # @@ -909,6 +858,12 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_DEBUG_CHIP is not set # +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# # Dallas's 1-wire bus # # CONFIG_W1 is not set @@ -976,7 +931,6 @@ CONFIG_FB_RADEON_I2C=y # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set -# CONFIG_FB_CYBLA is not set # CONFIG_FB_TRIDENT is not set # CONFIG_FB_VIRTUAL is not set @@ -1061,12 +1015,15 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_LIBUSUAL is not set # # USB Input Devices # CONFIG_USB_HID=y CONFIG_USB_HIDINPUT=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set # CONFIG_HID_FF is not set CONFIG_USB_HIDDEV=y # CONFIG_USB_AIPTEK is not set @@ -1080,6 +1037,7 @@ CONFIG_USB_HIDDEV=y # CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_ATI_REMOTE2 is not set # CONFIG_USB_KEYSPAN_REMOTE is not set # CONFIG_USB_APPLETOUCH is not set @@ -1167,6 +1125,10 @@ CONFIG_INFINIBAND_IPOIB=m # # +# EDAC - error detection and reporting (RAS) +# + +# # File systems # CONFIG_EXT2_FS=y @@ -1200,6 +1162,7 @@ CONFIG_XFS_EXPORT=y CONFIG_XFS_SECURITY=y CONFIG_XFS_POSIX_ACL=y # CONFIG_XFS_RT is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y @@ -1240,6 +1203,7 @@ CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_RAMFS=y # CONFIG_RELAYFS_FS is not set +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -1351,10 +1315,6 @@ CONFIG_CRC32=y CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m -CONFIG_TEXTSEARCH=y -CONFIG_TEXTSEARCH_KMP=m -CONFIG_TEXTSEARCH_BM=m -CONFIG_TEXTSEARCH_FSM=m # # Instrumentation Support @@ -1367,18 +1327,20 @@ CONFIG_OPROFILE=y # Kernel hacking # # CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=17 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set CONFIG_DEBUG_FS=y # CONFIG_DEBUG_VM is not set +CONFIG_FORCED_INLINING=y # CONFIG_RCU_TORTURE_TEST is not set CONFIG_DEBUG_STACKOVERFLOW=y CONFIG_DEBUG_STACK_USAGE=y @@ -1387,6 +1349,11 @@ CONFIG_XMON=y CONFIG_XMON_DEFAULT=y CONFIG_IRQSTACKS=y # CONFIG_BOOTX_TEXT is not set +# CONFIG_PPC_EARLY_DEBUG_LPAR is not set +# CONFIG_PPC_EARLY_DEBUG_G5 is not set +# CONFIG_PPC_EARLY_DEBUG_RTAS is not set +# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set +# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set # # Security options diff --git a/arch/powerpc/kernel/crash.c b/arch/powerpc/kernel/crash.c index 8c21d37..778f22f 100644 --- a/arch/powerpc/kernel/crash.c +++ b/arch/powerpc/kernel/crash.c @@ -134,8 +134,10 @@ static void crash_kexec_prepare_cpus(void) * the crash CPU will send an IPI and wait for other CPUs to * respond. If not, proceed the kexec boot even though we failed to * capture other CPU states. + * Delay of at least 10 seconds. */ - msecs = 1000000; + printk(KERN_ALERT "Sending IPI to other cpus...\n"); + msecs = 10000; while ((atomic_read(&waiting_for_crash_ipi) > 0) && (--msecs > 0)) { barrier(); mdelay(1); diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S index 03b25f9..a0579e8 100644 --- a/arch/powerpc/kernel/head_32.S +++ b/arch/powerpc/kernel/head_32.S @@ -714,6 +714,7 @@ AltiVecUnavailable: #ifdef CONFIG_ALTIVEC bne load_up_altivec /* if from user, just load it up */ #endif /* CONFIG_ALTIVEC */ + addi r3,r1,STACK_FRAME_OVERHEAD EXC_XFER_EE_LITE(0xf20, altivec_unavailable_exception) PerformanceMonitor: diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S index 2b03a09..11f2cd5 100644 --- a/arch/powerpc/kernel/head_64.S +++ b/arch/powerpc/kernel/head_64.S @@ -139,7 +139,7 @@ _GLOBAL(__secondary_hold) ori r24,r24,MSR_RI mtmsrd r24 /* RI on */ - /* Grab our linux cpu number */ + /* Grab our physical cpu number */ mr r24,r3 /* Tell the master cpu we're here */ @@ -153,11 +153,7 @@ _GLOBAL(__secondary_hold) cmpdi 0,r4,1 bne 100b -#ifdef CONFIG_HMT - SET_REG_IMMEDIATE(r4, .hmt_init) - mtctr r4 - bctr -#elif defined(CONFIG_SMP) || defined(CONFIG_KEXEC) +#if defined(CONFIG_SMP) || defined(CONFIG_KEXEC) LOAD_REG_IMMEDIATE(r4, .pSeries_secondary_smp_init) mtctr r4 mr r3,r24 @@ -319,7 +315,6 @@ exception_marker: label##_pSeries: \ HMT_MEDIUM; \ mtspr SPRN_SPRG1,r13; /* save r13 */ \ - RUNLATCH_ON(r13); \ EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common) #define STD_EXCEPTION_ISERIES(n, label, area) \ @@ -327,7 +322,6 @@ label##_pSeries: \ label##_iSeries: \ HMT_MEDIUM; \ mtspr SPRN_SPRG1,r13; /* save r13 */ \ - RUNLATCH_ON(r13); \ EXCEPTION_PROLOG_ISERIES_1(area); \ EXCEPTION_PROLOG_ISERIES_2; \ b label##_common @@ -337,7 +331,6 @@ label##_iSeries: \ label##_iSeries: \ HMT_MEDIUM; \ mtspr SPRN_SPRG1,r13; /* save r13 */ \ - RUNLATCH_ON(r13); \ EXCEPTION_PROLOG_ISERIES_1(PACA_EXGEN); \ lbz r10,PACAPROCENABLED(r13); \ cmpwi 0,r10,0; \ @@ -390,6 +383,7 @@ label##_common: \ label##_common: \ EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN); \ DISABLE_INTS; \ + bl .ppc64_runlatch_on; \ addi r3,r1,STACK_FRAME_OVERHEAD; \ bl hdlr; \ b .ret_from_except_lite @@ -407,7 +401,6 @@ __start_interrupts: _machine_check_pSeries: HMT_MEDIUM mtspr SPRN_SPRG1,r13 /* save r13 */ - RUNLATCH_ON(r13) EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common) . = 0x300 @@ -434,7 +427,6 @@ END_FTR_SECTION_IFCLR(CPU_FTR_SLB) data_access_slb_pSeries: HMT_MEDIUM mtspr SPRN_SPRG1,r13 - RUNLATCH_ON(r13) mfspr r13,SPRN_SPRG3 /* get paca address into r13 */ std r3,PACA_EXSLB+EX_R3(r13) mfspr r3,SPRN_DAR @@ -460,7 +452,6 @@ data_access_slb_pSeries: instruction_access_slb_pSeries: HMT_MEDIUM mtspr SPRN_SPRG1,r13 - RUNLATCH_ON(r13) mfspr r13,SPRN_SPRG3 /* get paca address into r13 */ std r3,PACA_EXSLB+EX_R3(r13) mfspr r3,SPRN_SRR0 /* SRR0 is faulting address */ @@ -491,7 +482,6 @@ instruction_access_slb_pSeries: .globl system_call_pSeries system_call_pSeries: HMT_MEDIUM - RUNLATCH_ON(r9) mr r9,r13 mfmsr r10 mfspr r13,SPRN_SPRG3 @@ -575,7 +565,6 @@ slb_miss_user_pseries: system_reset_fwnmi: HMT_MEDIUM mtspr SPRN_SPRG1,r13 /* save r13 */ - RUNLATCH_ON(r13) EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, system_reset_common) .globl machine_check_fwnmi @@ -583,7 +572,6 @@ system_reset_fwnmi: machine_check_fwnmi: HMT_MEDIUM mtspr SPRN_SPRG1,r13 /* save r13 */ - RUNLATCH_ON(r13) EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common) #ifdef CONFIG_PPC_ISERIES @@ -894,7 +882,6 @@ unrecov_fer: .align 7 .globl data_access_common data_access_common: - RUNLATCH_ON(r10) /* It wont fit in the 0x300 handler */ mfspr r10,SPRN_DAR std r10,PACA_EXGEN+EX_DAR(r13) mfspr r10,SPRN_DSISR @@ -1042,6 +1029,7 @@ hardware_interrupt_common: EXCEPTION_PROLOG_COMMON(0x500, PACA_EXGEN) hardware_interrupt_entry: DISABLE_INTS + bl .ppc64_runlatch_on addi r3,r1,STACK_FRAME_OVERHEAD bl .do_IRQ b .ret_from_except_lite @@ -1816,22 +1804,6 @@ _STATIC(start_here_multiplatform) ori r6,r6,MSR_RI mtmsrd r6 /* RI on */ -#ifdef CONFIG_HMT - /* Start up the second thread on cpu 0 */ - mfspr r3,SPRN_PVR - srwi r3,r3,16 - cmpwi r3,0x34 /* Pulsar */ - beq 90f - cmpwi r3,0x36 /* Icestar */ - beq 90f - cmpwi r3,0x37 /* SStar */ - beq 90f - b 91f /* HMT not supported */ -90: li r3,0 - bl .hmt_start_secondary -91: -#endif - /* The following gets the stack and TOC set up with the regs */ /* pointing to the real addr of the kernel stack. This is */ /* all done to support the C function call below which sets */ @@ -1945,77 +1917,8 @@ _STATIC(start_here_common) bl .start_kernel -_GLOBAL(hmt_init) -#ifdef CONFIG_HMT - LOAD_REG_IMMEDIATE(r5, hmt_thread_data) - mfspr r7,SPRN_PVR - srwi r7,r7,16 - cmpwi r7,0x34 /* Pulsar */ - beq 90f - cmpwi r7,0x36 /* Icestar */ - beq 91f - cmpwi r7,0x37 /* SStar */ - beq 91f - b 101f -90: mfspr r6,SPRN_PIR - andi. r6,r6,0x1f - b 92f -91: mfspr r6,SPRN_PIR - andi. r6,r6,0x3ff -92: sldi r4,r24,3 - stwx r6,r5,r4 - bl .hmt_start_secondary - b 101f - -__hmt_secondary_hold: - LOAD_REG_IMMEDIATE(r5, hmt_thread_data) - clrldi r5,r5,4 - li r7,0 - mfspr r6,SPRN_PIR - mfspr r8,SPRN_PVR - srwi r8,r8,16 - cmpwi r8,0x34 - bne 93f - andi. r6,r6,0x1f - b 103f -93: andi. r6,r6,0x3f - -103: lwzx r8,r5,r7 - cmpw r8,r6 - beq 104f - addi r7,r7,8 - b 103b - -104: addi r7,r7,4 - lwzx r9,r5,r7 - mr r24,r9 -101: -#endif - mr r3,r24 - b .pSeries_secondary_smp_init - -#ifdef CONFIG_HMT -_GLOBAL(hmt_start_secondary) - LOAD_REG_IMMEDIATE(r4,__hmt_secondary_hold) - clrldi r4,r4,4 - mtspr SPRN_NIADORM, r4 - mfspr r4, SPRN_MSRDORM - li r5, -65 - and r4, r4, r5 - mtspr SPRN_MSRDORM, r4 - lis r4,0xffef - ori r4,r4,0x7403 - mtspr SPRN_TSC, r4 - li r4,0x1f4 - mtspr SPRN_TST, r4 - mfspr r4, SPRN_HID0 - ori r4, r4, 0x1 - mtspr SPRN_HID0, r4 - mfspr r4, SPRN_CTRLF - oris r4, r4, 0x40 - mtspr SPRN_CTRLT, r4 - blr -#endif + /* Not reached */ + BUG_OPCODE /* * We put a few things here that have to be page-aligned. diff --git a/arch/powerpc/kernel/machine_kexec_64.c b/arch/powerpc/kernel/machine_kexec_64.c index d643144..ee166c5 100644 --- a/arch/powerpc/kernel/machine_kexec_64.c +++ b/arch/powerpc/kernel/machine_kexec_64.c @@ -26,8 +26,6 @@ #include <asm/prom.h> #include <asm/smp.h> -#define HASH_GROUP_SIZE 0x80 /* size of each hash group, asm/mmu.h */ - int default_machine_kexec_prepare(struct kimage *image) { int i; @@ -61,7 +59,7 @@ int default_machine_kexec_prepare(struct kimage *image) */ if (htab_address) { low = __pa(htab_address); - high = low + (htab_hash_mask + 1) * HASH_GROUP_SIZE; + high = low + htab_size_bytes; for (i = 0; i < image->nr_segments; i++) { begin = image->segment[i].mem; @@ -294,7 +292,7 @@ void default_machine_kexec(struct kimage *image) } /* Values we need to export to the second kernel via the device tree. */ -static unsigned long htab_base, htab_size, kernel_end; +static unsigned long htab_base, kernel_end; static struct property htab_base_prop = { .name = "linux,htab-base", @@ -305,7 +303,7 @@ static struct property htab_base_prop = { static struct property htab_size_prop = { .name = "linux,htab-size", .length = sizeof(unsigned long), - .value = (unsigned char *)&htab_size, + .value = (unsigned char *)&htab_size_bytes, }; static struct property kernel_end_prop = { @@ -331,8 +329,6 @@ static void __init export_htab_values(void) htab_base = __pa(htab_address); prom_add_property(node, &htab_base_prop); - - htab_size = 1UL << ppc64_pft_size; prom_add_property(node, &htab_size_prop); out: diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index 5770399..c225cf1 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -888,3 +888,35 @@ void dump_stack(void) show_stack(current, NULL); } EXPORT_SYMBOL(dump_stack); + +#ifdef CONFIG_PPC64 +void ppc64_runlatch_on(void) +{ + unsigned long ctrl; + + if (cpu_has_feature(CPU_FTR_CTRL) && !test_thread_flag(TIF_RUNLATCH)) { + HMT_medium(); + + ctrl = mfspr(SPRN_CTRLF); + ctrl |= CTRL_RUNLATCH; + mtspr(SPRN_CTRLT, ctrl); + + set_thread_flag(TIF_RUNLATCH); + } +} + +void ppc64_runlatch_off(void) +{ + unsigned long ctrl; + + if (cpu_has_feature(CPU_FTR_CTRL) && test_thread_flag(TIF_RUNLATCH)) { + HMT_medium(); + + clear_thread_flag(TIF_RUNLATCH); + + ctrl = mfspr(SPRN_CTRLF); + ctrl &= ~CTRL_RUNLATCH; + mtspr(SPRN_CTRLT, ctrl); + } +} +#endif diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c index 294832a..6dbd217 100644 --- a/arch/powerpc/kernel/prom.c +++ b/arch/powerpc/kernel/prom.c @@ -816,8 +816,6 @@ void __init unflatten_device_tree(void) { unsigned long start, mem, size; struct device_node **allnextp = &allnodes; - char *p = NULL; - int l = 0; DBG(" -> unflatten_device_tree()\n"); @@ -857,19 +855,6 @@ void __init unflatten_device_tree(void) if (of_chosen == NULL) of_chosen = of_find_node_by_path("/chosen@0"); - /* Retreive command line */ - if (of_chosen != NULL) { - p = (char *)get_property(of_chosen, "bootargs", &l); - if (p != NULL && l > 0) - strlcpy(cmd_line, p, min(l, COMMAND_LINE_SIZE)); - } -#ifdef CONFIG_CMDLINE - if (l == 0 || (l == 1 && (*p) == 0)) - strlcpy(cmd_line, CONFIG_CMDLINE, COMMAND_LINE_SIZE); -#endif /* CONFIG_CMDLINE */ - - DBG("Command line is: %s\n", cmd_line); - DBG(" <- unflatten_device_tree()\n"); } @@ -940,6 +925,8 @@ static int __init early_init_dt_scan_chosen(unsigned long node, { u32 *prop; unsigned long *lprop; + unsigned long l; + char *p; DBG("search \"chosen\", depth: %d, uname: %s\n", depth, uname); @@ -1004,6 +991,41 @@ static int __init early_init_dt_scan_chosen(unsigned long node, crashk_res.end = crashk_res.start + *lprop - 1; #endif + /* Retreive command line */ + p = of_get_flat_dt_prop(node, "bootargs", &l); + if (p != NULL && l > 0) + strlcpy(cmd_line, p, min((int)l, COMMAND_LINE_SIZE)); + +#ifdef CONFIG_CMDLINE + if (l == 0 || (l == 1 && (*p) == 0)) + strlcpy(cmd_line, CONFIG_CMDLINE, COMMAND_LINE_SIZE); +#endif /* CONFIG_CMDLINE */ + + DBG("Command line is: %s\n", cmd_line); + + if (strstr(cmd_line, "mem=")) { + char *p, *q; + unsigned long maxmem = 0; + + for (q = cmd_line; (p = strstr(q, "mem=")) != 0; ) { + q = p + 4; + if (p > cmd_line && p[-1] != ' ') + continue; + maxmem = simple_strtoul(q, &q, 0); + if (*q == 'k' || *q == 'K') { + maxmem <<= 10; + ++q; + } else if (*q == 'm' || *q == 'M') { + maxmem <<= 20; + ++q; + } else if (*q == 'g' || *q == 'G') { + maxmem <<= 30; + ++q; + } + } + memory_limit = maxmem; + } + /* break now */ return 1; } @@ -1124,7 +1146,7 @@ static void __init early_reserve_mem(void) size_32 = *(reserve_map_32++); if (size_32 == 0) break; - DBG("reserving: %lx -> %lx\n", base_32, size_32); + DBG("reserving: %x -> %x\n", base_32, size_32); lmb_reserve(base_32, size_32); } return; diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c index ec7153f..d34fe53 100644 --- a/arch/powerpc/kernel/prom_init.c +++ b/arch/powerpc/kernel/prom_init.c @@ -205,14 +205,6 @@ static cell_t __initdata regbuf[1024]; #define MAX_CPU_THREADS 2 -/* TO GO */ -#ifdef CONFIG_HMT -struct { - unsigned int pir; - unsigned int threadid; -} hmt_thread_data[NR_CPUS]; -#endif /* CONFIG_HMT */ - /* * Error results ... some OF calls will return "-1" on error, some * will return 0, some will return either. To simplify, here are @@ -1319,10 +1311,6 @@ static void __init prom_hold_cpus(void) */ *spinloop = 0; -#ifdef CONFIG_HMT - for (i = 0; i < NR_CPUS; i++) - RELOC(hmt_thread_data)[i].pir = 0xdeadbeef; -#endif /* look for cpus */ for (node = 0; prom_next_node(&node); ) { type[0] = 0; @@ -1389,32 +1377,6 @@ static void __init prom_hold_cpus(void) /* Reserve cpu #s for secondary threads. They start later. */ cpuid += cpu_threads; } -#ifdef CONFIG_HMT - /* Only enable HMT on processors that provide support. */ - if (__is_processor(PV_PULSAR) || - __is_processor(PV_ICESTAR) || - __is_processor(PV_SSTAR)) { - prom_printf(" starting secondary threads\n"); - - for (i = 0; i < NR_CPUS; i += 2) { - if (!cpu_online(i)) - continue; - - if (i == 0) { - unsigned long pir = mfspr(SPRN_PIR); - if (__is_processor(PV_PULSAR)) { - RELOC(hmt_thread_data)[i].pir = - pir & 0x1f; - } else { - RELOC(hmt_thread_data)[i].pir = - pir & 0x3ff; - } - } - } - } else { - prom_printf("Processor is not HMT capable\n"); - } -#endif if (cpuid > NR_CPUS) prom_printf("WARNING: maximum CPUs (" __stringify(NR_CPUS) diff --git a/arch/powerpc/mm/hash_native_64.c b/arch/powerpc/mm/hash_native_64.c index d96bcfe..33654d1 100644 --- a/arch/powerpc/mm/hash_native_64.c +++ b/arch/powerpc/mm/hash_native_64.c @@ -403,12 +403,17 @@ static void native_hpte_clear(void) */ hpte_v = hptep->v; + /* + * Call __tlbie() here rather than tlbie() since we + * already hold the native_tlbie_lock. + */ if (hpte_v & HPTE_V_VALID) { hptep->v = 0; - tlbie(slot2va(hpte_v, slot), MMU_PAGE_4K, 0); + __tlbie(slot2va(hpte_v, slot), MMU_PAGE_4K); } } + asm volatile("eieio; tlbsync; ptesync":::"memory"); spin_unlock(&native_tlbie_lock); local_irq_restore(flags); } diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c index 149351a..b1f614c 100644 --- a/arch/powerpc/mm/hash_utils_64.c +++ b/arch/powerpc/mm/hash_utils_64.c @@ -88,6 +88,7 @@ static unsigned long _SDR1; struct mmu_psize_def mmu_psize_defs[MMU_PAGE_COUNT]; hpte_t *htab_address; +unsigned long htab_size_bytes; unsigned long htab_hash_mask; int mmu_linear_psize = MMU_PAGE_4K; int mmu_virtual_psize = MMU_PAGE_4K; @@ -399,7 +400,7 @@ void create_section_mapping(unsigned long start, unsigned long end) void __init htab_initialize(void) { - unsigned long table, htab_size_bytes; + unsigned long table; unsigned long pteg_count; unsigned long mode_rw; unsigned long base = 0, size = 0; diff --git a/arch/powerpc/oprofile/Kconfig b/arch/powerpc/oprofile/Kconfig index eb2dece..d03c0e5 100644 --- a/arch/powerpc/oprofile/Kconfig +++ b/arch/powerpc/oprofile/Kconfig @@ -1,4 +1,5 @@ config PROFILING + depends on !PPC_ISERIES bool "Profiling support (EXPERIMENTAL)" help Say Y here to enable the extended profiling support mechanisms used diff --git a/arch/powerpc/platforms/iseries/lpevents.c b/arch/powerpc/platforms/iseries/lpevents.c index 0b88530..8ca7b93 100644 --- a/arch/powerpc/platforms/iseries/lpevents.c +++ b/arch/powerpc/platforms/iseries/lpevents.c @@ -184,6 +184,8 @@ void setup_hvlpevent_queue(void) { void *eventStack; + spin_lock_init(&hvlpevent_queue.lock); + /* Allocate a page for the Event Stack. */ eventStack = alloc_bootmem_pages(LpEventStackSize); memset(eventStack, 0, LpEventStackSize); diff --git a/arch/powerpc/platforms/iseries/setup.c b/arch/powerpc/platforms/iseries/setup.c index 3f87901..3ecc4a6 100644 --- a/arch/powerpc/platforms/iseries/setup.c +++ b/arch/powerpc/platforms/iseries/setup.c @@ -648,6 +648,7 @@ static void yield_shared_processor(void) * here and let the timer_interrupt code sort out the actual time. */ get_lppaca()->int_dword.fields.decr_int = 1; + ppc64_runlatch_on(); process_iSeries_events(); } diff --git a/arch/powerpc/platforms/maple/pci.c b/arch/powerpc/platforms/maple/pci.c index 7d4099a..85d6c93 100644 --- a/arch/powerpc/platforms/maple/pci.c +++ b/arch/powerpc/platforms/maple/pci.c @@ -435,8 +435,8 @@ void __init maple_pci_init(void) PCI_DN(np)->busno = 0xf0; } - /* Tell pci.c to use the common resource allocation mecanism */ - pci_probe_only = 0; + /* Tell pci.c to not change any resource allocations. */ + pci_probe_only = 1; /* Allow all IO */ io_page_mask = -1; diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig index e3fc340..4e5c8f8 100644 --- a/arch/powerpc/platforms/pseries/Kconfig +++ b/arch/powerpc/platforms/pseries/Kconfig @@ -9,13 +9,6 @@ config PPC_SPLPAR processors, that is, which share physical processors between two or more partitions. -config HMT - bool "Hardware multithreading" - depends on SMP && PPC_PSERIES && BROKEN - help - This option enables hardware multithreading on RS64 cpus. - pSeries systems p620 and p660 have such a cpu type. - config EEH bool "PCI Extended Error Handling (EEH)" if EMBEDDED depends on PPC_PSERIES diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c index 4f26304..7dcdfcb 100644 --- a/arch/powerpc/sysdev/mpic.c +++ b/arch/powerpc/sysdev/mpic.c @@ -234,7 +234,7 @@ static void mpic_shutdown_ht_interrupt(struct mpic *mpic, unsigned int source, spin_lock_irqsave(&mpic->fixup_lock, flags); writeb(0x10 + 2 * fixup->index, fixup->base + 2); tmp = readl(fixup->base + 4); - tmp &= ~1U; + tmp |= 1; writel(tmp, fixup->base + 4); spin_unlock_irqrestore(&mpic->fixup_lock, flags); } @@ -446,14 +446,15 @@ static unsigned int mpic_startup_irq(unsigned int irq) #ifdef CONFIG_MPIC_BROKEN_U3 struct mpic *mpic = mpic_from_irq(irq); unsigned int src = irq - mpic->irq_offset; +#endif /* CONFIG_MPIC_BROKEN_U3 */ + + mpic_enable_irq(irq); +#ifdef CONFIG_MPIC_BROKEN_U3 if (mpic_is_ht_interrupt(mpic, src)) mpic_startup_ht_interrupt(mpic, src, irq_desc[irq].status); - #endif /* CONFIG_MPIC_BROKEN_U3 */ - mpic_enable_irq(irq); - return 0; } diff --git a/arch/ppc/kernel/head.S b/arch/ppc/kernel/head.S index c5a890d..53ea845 100644 --- a/arch/ppc/kernel/head.S +++ b/arch/ppc/kernel/head.S @@ -751,6 +751,7 @@ AltiVecUnavailable: #ifdef CONFIG_ALTIVEC bne load_up_altivec /* if from user, just load it up */ #endif /* CONFIG_ALTIVEC */ + addi r3,r1,STACK_FRAME_OVERHEAD EXC_XFER_EE_LITE(0xf20, altivec_unavailable_exception) #ifdef CONFIG_PPC64BRIDGE diff --git a/arch/ppc/xmon/adb.c b/arch/ppc/xmon/adb.c deleted file mode 100644 index e91384d..0000000 --- a/arch/ppc/xmon/adb.c +++ /dev/null @@ -1,212 +0,0 @@ -/* - * Copyright (C) 1996 Paul Mackerras. - */ -#include "nonstdio.h" -#include "privinst.h" - -#define scanhex xmon_scanhex -#define skipbl xmon_skipbl - -#define ADB_B (*(volatile unsigned char *)0xf3016000) -#define ADB_SR (*(volatile unsigned char *)0xf3017400) -#define ADB_ACR (*(volatile unsigned char *)0xf3017600) -#define ADB_IFR (*(volatile unsigned char *)0xf3017a00) - -static inline void eieio(void) { asm volatile ("eieio" : :); } - -#define N_ADB_LOG 1000 -struct adb_log { - unsigned char b; - unsigned char ifr; - unsigned char acr; - unsigned int time; -} adb_log[N_ADB_LOG]; -int n_adb_log; - -void -init_adb_log(void) -{ - adb_log[0].b = ADB_B; - adb_log[0].ifr = ADB_IFR; - adb_log[0].acr = ADB_ACR; - adb_log[0].time = get_dec(); - n_adb_log = 0; -} - -void -dump_adb_log(void) -{ - unsigned t, t0; - struct adb_log *ap; - int i; - - ap = adb_log; - t0 = ap->time; - for (i = 0; i <= n_adb_log; ++i, ++ap) { - t = t0 - ap->time; - printf("b=%x ifr=%x acr=%x at %d.%.7d\n", ap->b, ap->ifr, ap->acr, - t / 1000000000, (t % 1000000000) / 100); - } -} - -void -adb_chklog(void) -{ - struct adb_log *ap = &adb_log[n_adb_log + 1]; - - ap->b = ADB_B; - ap->ifr = ADB_IFR; - ap->acr = ADB_ACR; - if (ap->b != ap[-1].b || (ap->ifr & 4) != (ap[-1].ifr & 4) - || ap->acr != ap[-1].acr) { - ap->time = get_dec(); - ++n_adb_log; - } -} - -int -adb_bitwait(int bmask, int bval, int fmask, int fval) -{ - int i; - struct adb_log *ap; - - for (i = 10000; i > 0; --i) { - adb_chklog(); - ap = &adb_log[n_adb_log]; - if ((ap->b & bmask) == bval && (ap->ifr & fmask) == fval) - return 0; - } - return -1; -} - -int -adb_wait(void) -{ - if (adb_bitwait(0, 0, 4, 4) < 0) { - printf("adb: ready wait timeout\n"); - return -1; - } - return 0; -} - -void -adb_readin(void) -{ - int i, j; - unsigned char d[64]; - - if (ADB_B & 8) { - printf("ADB_B: %x\n", ADB_B); - return; - } - i = 0; - adb_wait(); - j = ADB_SR; - eieio(); - ADB_B &= ~0x20; - eieio(); - for (;;) { - if (adb_wait() < 0) - break; - d[i++] = ADB_SR; - eieio(); - if (ADB_B & 8) - break; - ADB_B ^= 0x10; - eieio(); - } - ADB_B |= 0x30; - if (adb_wait() == 0) - j = ADB_SR; - for (j = 0; j < i; ++j) - printf("%.2x ", d[j]); - printf("\n"); -} - -int -adb_write(unsigned char *d, int i) -{ - int j; - unsigned x; - - if ((ADB_B & 8) == 0) { - printf("r: "); - adb_readin(); - } - for (;;) { - ADB_ACR = 0x1c; - eieio(); - ADB_SR = d[0]; - eieio(); - ADB_B &= ~0x20; - eieio(); - if (ADB_B & 8) - break; - ADB_ACR = 0xc; - eieio(); - ADB_B |= 0x20; - eieio(); - adb_readin(); - } - adb_wait(); - for (j = 1; j < i; ++j) { - ADB_SR = d[j]; - eieio(); - ADB_B ^= 0x10; - eieio(); - if (adb_wait() < 0) - break; - } - ADB_ACR = 0xc; - eieio(); - x = ADB_SR; - eieio(); - ADB_B |= 0x30; - return j; -} - -void -adbcmds(void) -{ - char cmd; - unsigned rtcu, rtcl, dec, pdec, x; - int i, j; - unsigned char d[64]; - - cmd = skipbl(); - switch (cmd) { - case 't': - for (;;) { - rtcl = get_rtcl(); - rtcu = get_rtcu(); - dec = get_dec(); - printf("rtc u=%u l=%u dec=%x (%d = %d.%.7d)\n", - rtcu, rtcl, dec, pdec - dec, (pdec - dec) / 1000000000, - ((pdec - dec) % 1000000000) / 100); - pdec = dec; - if (cmd == 'x') - break; - while (xmon_read(stdin, &cmd, 1) != 1) - ; - } - break; - case 'r': - init_adb_log(); - while (adb_bitwait(8, 0, 0, 0) == 0) - adb_readin(); - break; - case 'w': - i = 0; - while (scanhex(&x)) - d[i++] = x; - init_adb_log(); - j = adb_write(d, i); - printf("sent %d bytes\n", j); - while (adb_bitwait(8, 0, 0, 0) == 0) - adb_readin(); - break; - case 'l': - dump_adb_log(); - break; - } -} diff --git a/arch/ppc/xmon/start.c b/arch/ppc/xmon/start.c index 484f5bb..ff86b2d 100644 --- a/arch/ppc/xmon/start.c +++ b/arch/ppc/xmon/start.c @@ -6,16 +6,11 @@ #include <asm/machdep.h> #include <asm/io.h> #include <asm/page.h> -#include <linux/adb.h> -#include <linux/pmu.h> -#include <linux/cuda.h> #include <linux/kernel.h> #include <linux/errno.h> #include <linux/sysrq.h> #include <linux/bitops.h> #include <asm/xmon.h> -#include <asm/prom.h> -#include <asm/bootx.h> #include <asm/machdep.h> #include <asm/errno.h> #include <asm/processor.h> @@ -26,9 +21,7 @@ static volatile unsigned char *sccc, *sccd; unsigned int TXRDY, RXRDY, DLAB; static int xmon_expect(const char *str, unsigned int timeout); -static int use_screen; static int via_modem; -static int xmon_use_sccb; #define TB_SPEED 25000000 @@ -46,47 +39,6 @@ void buf_access(void) sccd[3] &= ~DLAB; /* reset DLAB */ } -extern int adb_init(void); - -#ifdef CONFIG_PPC_CHRP -/* - * This looks in the "ranges" property for the primary PCI host bridge - * to find the physical address of the start of PCI/ISA I/O space. - * It is basically a cut-down version of pci_process_bridge_OF_ranges. - */ -static unsigned long chrp_find_phys_io_base(void) -{ - struct device_node *node; - unsigned int *ranges; - unsigned long base = CHRP_ISA_IO_BASE; - int rlen = 0; - int np; - - node = find_devices("isa"); - if (node != NULL) { - node = node->parent; - if (node == NULL || node->type == NULL - || strcmp(node->type, "pci") != 0) - node = NULL; - } - if (node == NULL) - node = find_devices("pci"); - if (node == NULL) - return base; - - ranges = (unsigned int *) get_property(node, "ranges", &rlen); - np = prom_n_addr_cells(node) + 5; - while ((rlen -= np * sizeof(unsigned int)) >= 0) { - if ((ranges[0] >> 24) == 1 && ranges[2] == 0) { - /* I/O space starting at 0, grab the phys base */ - base = ranges[np - 3]; - break; - } - ranges += np; - } - return base; -} -#endif /* CONFIG_PPC_CHRP */ #ifdef CONFIG_MAGIC_SYSRQ static void sysrq_handle_xmon(int key, struct pt_regs *regs, @@ -109,22 +61,6 @@ xmon_map_scc(void) #ifdef CONFIG_PPC_MULTIPLATFORM volatile unsigned char *base; -#ifdef CONFIG_PPC_CHRP - base = (volatile unsigned char *) isa_io_base; - if (_machine == _MACH_chrp) - base = (volatile unsigned char *) - ioremap(chrp_find_phys_io_base(), 0x1000); - - sccc = base + 0x3fd; - sccd = base + 0x3f8; - if (xmon_use_sccb) { - sccc -= 0x100; - sccd -= 0x100; - } - TXRDY = 0x20; - RXRDY = 1; - DLAB = 0x80; -#endif /* CONFIG_PPC_CHRP */ #elif defined(CONFIG_GEMINI) /* should already be mapped by the kernel boot */ sccc = (volatile unsigned char *) 0xffeffb0d; @@ -143,7 +79,7 @@ xmon_map_scc(void) register_sysrq_key('x', &sysrq_xmon_op); } -static int scc_initialized = 0; +static int scc_initialized; void xmon_init_scc(void); @@ -163,14 +99,6 @@ xmon_write(void *handle, void *ptr, int nb) break; #endif -#ifdef CONFIG_BOOTX_TEXT - if (use_screen) { - /* write it on the screen */ - for (i = 0; i < nb; ++i) - btext_drawchar(*p++); - goto out; - } -#endif if (!scc_initialized) xmon_init_scc(); ct = 0; @@ -190,7 +118,6 @@ xmon_write(void *handle, void *ptr, int nb) eieio(); } - out: #ifdef CONFIG_SMP if (!locked) clear_bit(0, &xmon_write_lock); @@ -199,65 +126,7 @@ xmon_write(void *handle, void *ptr, int nb) } int xmon_wants_key; -int xmon_adb_keycode; - -#ifdef CONFIG_BOOTX_TEXT -static int xmon_adb_shiftstate; - -static unsigned char xmon_keytab[128] = - "asdfhgzxcv\000bqwer" /* 0x00 - 0x0f */ - "yt123465=97-80]o" /* 0x10 - 0x1f */ - "u[ip\rlj'k;\\,/nm." /* 0x20 - 0x2f */ - "\t `\177\0\033\0\0\0\0\0\0\0\0\0\0" /* 0x30 - 0x3f */ - "\0.\0*\0+\0\0\0\0\0/\r\0-\0" /* 0x40 - 0x4f */ - "\0\0000123456789\0\0\0"; /* 0x50 - 0x5f */ - -static unsigned char xmon_shift_keytab[128] = - "ASDFHGZXCV\000BQWER" /* 0x00 - 0x0f */ - "YT!@#$^%+(&_*)}O" /* 0x10 - 0x1f */ - "U{IP\rLJ\"K:|<?NM>" /* 0x20 - 0x2f */ - "\t ~\177\0\033\0\0\0\0\0\0\0\0\0\0" /* 0x30 - 0x3f */ - "\0.\0*\0+\0\0\0\0\0/\r\0-\0" /* 0x40 - 0x4f */ - "\0\0000123456789\0\0\0"; /* 0x50 - 0x5f */ - -static int -xmon_get_adb_key(void) -{ - int k, t, on; - xmon_wants_key = 1; - for (;;) { - xmon_adb_keycode = -1; - t = 0; - on = 0; - do { - if (--t < 0) { - on = 1 - on; - btext_drawchar(on? 0xdb: 0x20); - btext_drawchar('\b'); - t = 200000; - } - do_poll_adb(); - } while (xmon_adb_keycode == -1); - k = xmon_adb_keycode; - if (on) - btext_drawstring(" \b"); - - /* test for shift keys */ - if ((k & 0x7f) == 0x38 || (k & 0x7f) == 0x7b) { - xmon_adb_shiftstate = (k & 0x80) == 0; - continue; - } - if (k >= 0x80) - continue; /* ignore up transitions */ - k = (xmon_adb_shiftstate? xmon_shift_keytab: xmon_keytab)[k]; - if (k != 0) - break; - } - xmon_wants_key = 0; - return k; -} -#endif /* CONFIG_BOOTX_TEXT */ int xmon_read(void *handle, void *ptr, int nb) @@ -265,18 +134,11 @@ xmon_read(void *handle, void *ptr, int nb) char *p = ptr; int i; -#ifdef CONFIG_BOOTX_TEXT - if (use_screen) { - for (i = 0; i < nb; ++i) - *p++ = xmon_get_adb_key(); - return i; - } -#endif if (!scc_initialized) xmon_init_scc(); for (i = 0; i < nb; ++i) { while ((*sccc & RXRDY) == 0) - do_poll_adb(); + ; buf_access(); *p++ = *sccd; } @@ -287,7 +149,7 @@ int xmon_read_poll(void) { if ((*sccc & RXRDY) == 0) { - do_poll_adb(); + ; return -1; } buf_access(); @@ -297,15 +159,6 @@ xmon_read_poll(void) void xmon_init_scc(void) { - if ( _machine == _MACH_chrp ) - { - sccd[3] = 0x83; eieio(); /* LCR = 8N1 + DLAB */ - sccd[0] = 12; eieio(); /* DLL = 9600 baud */ - sccd[1] = 0; eieio(); - sccd[2] = 0; eieio(); /* FCR = 0 */ - sccd[3] = 3; eieio(); /* LCR = 8N1 */ - sccd[1] = 0; eieio(); /* IER = 0 */ - } scc_initialized = 1; if (via_modem) { for (;;) { @@ -321,22 +174,6 @@ xmon_init_scc(void) } } -#if 0 -extern int (*prom_entry)(void *); - -int -xmon_exit(void) -{ - struct prom_args { - char *service; - } args; - - for (;;) { - args.service = "exit"; - (*prom_entry)(&args); - } -} -#endif void *xmon_stdin; void *xmon_stdout; diff --git a/arch/ppc/xmon/xmon.c b/arch/ppc/xmon/xmon.c index bdaf659..06fa44b 100644 --- a/arch/ppc/xmon/xmon.c +++ b/arch/ppc/xmon/xmon.c @@ -12,8 +12,6 @@ #include <linux/kallsyms.h> #include <asm/ptrace.h> #include <asm/string.h> -#include <asm/prom.h> -#include <asm/bootx.h> #include <asm/machdep.h> #include <asm/xmon.h> #include "nonstdio.h" @@ -101,9 +99,6 @@ void cacheflush(void); static void cpu_cmd(void); #endif /* CONFIG_SMP */ static void csum(void); -#ifdef CONFIG_BOOTX_TEXT -static void vidcmds(void); -#endif static void bootcmds(void); static void proccall(void); static void printtime(void); @@ -522,11 +517,6 @@ cmds(struct pt_regs *excp) cpu_cmd(); break; #endif /* CONFIG_SMP */ -#ifdef CONFIG_BOOTX_TEXT - case 'v': - vidcmds(); - break; -#endif case 'z': bootcmds(); break; @@ -618,43 +608,6 @@ static void cpu_cmd(void) } #endif /* CONFIG_SMP */ -#ifdef CONFIG_BOOTX_TEXT -extern boot_infos_t disp_bi; - -static void vidcmds(void) -{ - int c = inchar(); - unsigned int val, w; - extern int boot_text_mapped; - - if (!boot_text_mapped) - return; - if (c != '\n' && scanhex(&val)) { - switch (c) { - case 'd': - w = disp_bi.dispDeviceRowBytes - / (disp_bi.dispDeviceDepth >> 3); - disp_bi.dispDeviceDepth = val; - disp_bi.dispDeviceRowBytes = w * (val >> 3); - return; - case 'p': - disp_bi.dispDeviceRowBytes = val; - return; - case 'w': - disp_bi.dispDeviceRect[2] = val; - return; - case 'h': - disp_bi.dispDeviceRect[3] = val; - return; - } - } - printf("W = %d (0x%x) H = %d (0x%x) D = %d (0x%x) P = %d (0x%x)\n", - disp_bi.dispDeviceRect[2], disp_bi.dispDeviceRect[2], - disp_bi.dispDeviceRect[3], disp_bi.dispDeviceRect[3], - disp_bi.dispDeviceDepth, disp_bi.dispDeviceDepth, - disp_bi.dispDeviceRowBytes, disp_bi.dispDeviceRowBytes); -} -#endif /* CONFIG_BOOTX_TEXT */ static unsigned short fcstab[256] = { 0x0000, 0x1189, 0x2312, 0x329b, 0x4624, 0x57ad, 0x6536, 0x74bf, @@ -1020,7 +973,6 @@ dump_hash_table(void) } #else -#ifndef CONFIG_PPC64BRIDGE static void dump_hash_table_seg(unsigned seg, unsigned start, unsigned end) { @@ -1079,66 +1031,6 @@ dump_hash_table_seg(unsigned seg, unsigned start, unsigned end) printf(" ... %x\n", last_va); } -#else /* CONFIG_PPC64BRIDGE */ -static void -dump_hash_table_seg(unsigned seg, unsigned start, unsigned end) -{ - extern void *Hash; - extern unsigned long Hash_size; - unsigned *htab = Hash; - unsigned hsize = Hash_size; - unsigned v, hmask, va, last_va; - int found, last_found, i; - unsigned *hg, w1, last_w2, last_va0; - - last_found = 0; - hmask = hsize / 128 - 1; - va = start; - start = (start >> 12) & 0xffff; - end = (end >> 12) & 0xffff; - for (v = start; v < end; ++v) { - found = 0; - hg = htab + (((v ^ seg) & hmask) * 32); - w1 = 1 | (seg << 12) | ((v & 0xf800) >> 4); - for (i = 0; i < 8; ++i, hg += 4) { - if (hg[1] == w1) { - found = 1; - break; - } - } - if (!found) { - w1 ^= 2; - hg = htab + ((~(v ^ seg) & hmask) * 32); - for (i = 0; i < 8; ++i, hg += 4) { - if (hg[1] == w1) { - found = 1; - break; - } - } - } - if (!(last_found && found && (hg[3] & ~0x180) == last_w2 + 4096)) { - if (last_found) { - if (last_va != last_va0) - printf(" ... %x", last_va); - printf("\n"); - } - if (found) { - printf("%x to %x", va, hg[3]); - last_va0 = va; - } - last_found = found; - } - if (found) { - last_w2 = hg[3] & ~0x180; - last_va = va; - } - va += 4096; - } - if (last_found) - printf(" ... %x\n", last_va); -} -#endif /* CONFIG_PPC64BRIDGE */ - static unsigned hash_ctx; static unsigned hash_start; static unsigned hash_end; diff --git a/arch/s390/kernel/compat_wrapper.S b/arch/s390/kernel/compat_wrapper.S index 615964c..50e8013 100644 --- a/arch/s390/kernel/compat_wrapper.S +++ b/arch/s390/kernel/compat_wrapper.S @@ -1552,6 +1552,7 @@ sys_linkat_wrapper: llgtr %r3,%r3 # const char * lgfr %r4,%r4 # int llgtr %r5,%r5 # const char * + lgfr %r6,%r6 # int jg sys_linkat .globl sys_symlinkat_wrapper diff --git a/arch/sparc64/Kconfig b/arch/sparc64/Kconfig index ab733be..4c0a50a 100644 --- a/arch/sparc64/Kconfig +++ b/arch/sparc64/Kconfig @@ -383,6 +383,7 @@ source "arch/sparc64/oprofile/Kconfig" config KPROBES bool "Kprobes (EXPERIMENTAL)" + depends on EXPERIMENTAL && MODULES help Kprobes allows you to trap at almost any kernel address and execute a callback function. register_kprobe() establishes diff --git a/arch/sparc64/kernel/setup.c b/arch/sparc64/kernel/setup.c index 054461e..158bd31 100644 --- a/arch/sparc64/kernel/setup.c +++ b/arch/sparc64/kernel/setup.c @@ -542,6 +542,8 @@ void __init setup_arch(char **cmdline_p) } #endif + smp_setup_cpu_possible_map(); + paging_init(); } diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c index 1fb6323..1f7ad8a 100644 --- a/arch/sparc64/kernel/smp.c +++ b/arch/sparc64/kernel/smp.c @@ -1079,18 +1079,12 @@ int setup_profiling_timer(unsigned int multiplier) return 0; } +/* Constrain the number of cpus to max_cpus. */ void __init smp_prepare_cpus(unsigned int max_cpus) { - int instance, mid; - - instance = 0; - while (!cpu_find_by_instance(instance, NULL, &mid)) { - if (mid < max_cpus) - cpu_set(mid, phys_cpu_present_map); - instance++; - } - if (num_possible_cpus() > max_cpus) { + int instance, mid; + instance = 0; while (!cpu_find_by_instance(instance, NULL, &mid)) { if (mid != boot_cpu_id) { @@ -1105,6 +1099,22 @@ void __init smp_prepare_cpus(unsigned int max_cpus) smp_store_cpu_info(boot_cpu_id); } +/* Set this up early so that things like the scheduler can init + * properly. We use the same cpu mask for both the present and + * possible cpu map. + */ +void __init smp_setup_cpu_possible_map(void) +{ + int instance, mid; + + instance = 0; + while (!cpu_find_by_instance(instance, NULL, &mid)) { + if (mid < NR_CPUS) + cpu_set(mid, phys_cpu_present_map); + instance++; + } +} + void __devinit smp_prepare_boot_cpu(void) { if (hard_smp_processor_id() >= NR_CPUS) { diff --git a/arch/um/drivers/cow.h b/arch/um/drivers/cow.h index dc36b22..04e3958 100644 --- a/arch/um/drivers/cow.h +++ b/arch/um/drivers/cow.h @@ -46,7 +46,7 @@ extern int file_reader(__u64 offset, char *buf, int len, void *arg); extern int read_cow_header(int (*reader)(__u64, char *, int, void *), void *arg, __u32 *version_out, char **backing_file_out, time_t *mtime_out, - unsigned long long *size_out, int *sectorsize_out, + __u64 *size_out, int *sectorsize_out, __u32 *align_out, int *bitmap_offset_out); extern int write_cow_header(char *cow_file, int fd, char *backing_file, diff --git a/arch/um/drivers/cow_sys.h b/arch/um/drivers/cow_sys.h index c83fc5d..94de4ea 100644 --- a/arch/um/drivers/cow_sys.h +++ b/arch/um/drivers/cow_sys.h @@ -23,17 +23,17 @@ static inline char *cow_strdup(char *str) return(uml_strdup(str)); } -static inline int cow_seek_file(int fd, unsigned long long offset) +static inline int cow_seek_file(int fd, __u64 offset) { return(os_seek_file(fd, offset)); } -static inline int cow_file_size(char *file, unsigned long long *size_out) +static inline int cow_file_size(char *file, __u64 *size_out) { return(os_file_size(file, size_out)); } -static inline int cow_write_file(int fd, char *buf, int size) +static inline int cow_write_file(int fd, void *buf, int size) { return(os_write_file(fd, buf, size)); } diff --git a/arch/um/drivers/cow_user.c b/arch/um/drivers/cow_user.c index fbe2217..61951b7 100644 --- a/arch/um/drivers/cow_user.c +++ b/arch/um/drivers/cow_user.c @@ -176,7 +176,7 @@ int write_cow_header(char *cow_file, int fd, char *backing_file, err = -ENOMEM; header = cow_malloc(sizeof(*header)); if(header == NULL){ - cow_printf("Failed to allocate COW V3 header\n"); + cow_printf("write_cow_header - failed to allocate COW V3 header\n"); goto out; } header->magic = htonl(COW_MAGIC); @@ -196,15 +196,17 @@ int write_cow_header(char *cow_file, int fd, char *backing_file, err = os_file_modtime(header->backing_file, &modtime); if(err < 0){ - cow_printf("Backing file '%s' mtime request failed, " - "err = %d\n", header->backing_file, -err); + cow_printf("write_cow_header - backing file '%s' mtime " + "request failed, err = %d\n", header->backing_file, + -err); goto out_free; } err = cow_file_size(header->backing_file, size); if(err < 0){ - cow_printf("Couldn't get size of backing file '%s', " - "err = %d\n", header->backing_file, -err); + cow_printf("write_cow_header - couldn't get size of " + "backing file '%s', err = %d\n", + header->backing_file, -err); goto out_free; } @@ -214,10 +216,11 @@ int write_cow_header(char *cow_file, int fd, char *backing_file, header->alignment = htonl(alignment); header->cow_format = COW_BITMAP; - err = os_write_file(fd, header, sizeof(*header)); + err = cow_write_file(fd, header, sizeof(*header)); if(err != sizeof(*header)){ - cow_printf("Write of header to new COW file '%s' failed, " - "err = %d\n", cow_file, -err); + cow_printf("write_cow_header - write of header to " + "new COW file '%s' failed, err = %d\n", cow_file, + -err); goto out_free; } err = 0; @@ -299,7 +302,7 @@ int read_cow_header(int (*reader)(__u64, char *, int, void *), void *arg, } else if(version == 3){ if(n < sizeof(header->v3)){ - cow_printf("read_cow_header - failed to read V2 " + cow_printf("read_cow_header - failed to read V3 " "header\n"); goto out; } @@ -359,7 +362,8 @@ int init_cow_file(int fd, char *cow_file, char *backing_file, int sectorsize, if(err != sizeof(zero)){ cow_printf("Write of bitmap to new COW file '%s' failed, " "err = %d\n", cow_file, -err); - err = -EINVAL; + if (err >= 0) + err = -EINVAL; goto out; } diff --git a/arch/um/drivers/net_user.c b/arch/um/drivers/net_user.c index 098fa65..0e2f061 100644 --- a/arch/um/drivers/net_user.c +++ b/arch/um/drivers/net_user.c @@ -47,10 +47,12 @@ void tap_check_ips(char *gate_addr, unsigned char *eth_addr) } } +/* Do reliable error handling as this fails frequently enough. */ void read_output(int fd, char *output, int len) { - int remain, n, actual; + int remain, ret, expected; char c; + char *str; if(output == NULL){ output = &c; @@ -58,23 +60,31 @@ void read_output(int fd, char *output, int len) } *output = '\0'; - n = os_read_file(fd, &remain, sizeof(remain)); - if(n != sizeof(remain)){ - printk("read_output - read of length failed, err = %d\n", -n); - return; + ret = os_read_file(fd, &remain, sizeof(remain)); + + if (ret != sizeof(remain)) { + expected = sizeof(remain); + str = "length"; + goto err; } while(remain != 0){ - n = (remain < len) ? remain : len; - actual = os_read_file(fd, output, n); - if(actual != n){ - printk("read_output - read of data failed, " - "err = %d\n", -actual); - return; + expected = (remain < len) ? remain : len; + ret = os_read_file(fd, output, expected); + if (ret != expected) { + str = "data"; + goto err; } - remain -= actual; + remain -= ret; } + return; + +err: + if (ret < 0) + printk("read_output - read of %s failed, errno = %d\n", str, -ret); + else + printk("read_output - read of %s failed, read only %d of %d bytes\n", str, ret, expected); } int net_read(int fd, void *buf, int len) diff --git a/arch/um/drivers/ubd_kern.c b/arch/um/drivers/ubd_kern.c index 101efd2..fa617e0 100644 --- a/arch/um/drivers/ubd_kern.c +++ b/arch/um/drivers/ubd_kern.c @@ -1135,7 +1135,7 @@ static int path_requires_switch(char *from_cmdline, char *from_cow, char *cow) static int backing_file_mismatch(char *file, __u64 size, time_t mtime) { unsigned long modtime; - long long actual; + unsigned long long actual; int err; err = os_file_modtime(file, &modtime); diff --git a/arch/um/include/init.h b/arch/um/include/init.h index cbd79a8..d4de7c0 100644 --- a/arch/um/include/init.h +++ b/arch/um/include/init.h @@ -122,7 +122,7 @@ extern struct uml_param __uml_setup_start, __uml_setup_end; #define __exitcall(fn) static exitcall_t __exitcall_##fn __exit_call = fn -#define __init_call __attribute__ ((unused,__section__ (".initcall.init"))) +#define __init_call __attribute_used__ __attribute__ ((__section__ (".initcall.init"))) #endif diff --git a/arch/um/include/os.h b/arch/um/include/os.h index eb1710b..2a1c64d 100644 --- a/arch/um/include/os.h +++ b/arch/um/include/os.h @@ -179,8 +179,11 @@ extern void os_stop_process(int pid); extern void os_kill_process(int pid, int reap_child); extern void os_kill_ptraced_process(int pid, int reap_child); extern void os_usr1_process(int pid); +extern long os_ptrace_ldt(long pid, long addr, long data); + extern int os_getpid(void); extern int os_getpgrp(void); + extern void init_new_thread_stack(void *sig_stack, void (*usr1_handler)(int)); extern void init_new_thread_signals(int altstack); extern int run_kernel_thread(int (*fn)(void *), void *arg, void **jmp_ptr); diff --git a/arch/um/os-Linux/file.c b/arch/um/os-Linux/file.c index f55773c..3bd10de 100644 --- a/arch/um/os-Linux/file.c +++ b/arch/um/os-Linux/file.c @@ -272,14 +272,23 @@ int os_connect_socket(char *name) snprintf(sock.sun_path, sizeof(sock.sun_path), "%s", name); fd = socket(AF_UNIX, SOCK_STREAM, 0); - if(fd < 0) - return(fd); + if(fd < 0) { + err = -errno; + goto out; + } err = connect(fd, (struct sockaddr *) &sock, sizeof(sock)); - if(err) - return(-errno); + if(err) { + err = -errno; + goto out_close; + } - return(fd); + return fd; + +out_close: + close(fd); +out: + return err; } void os_close_file(int fd) diff --git a/arch/um/os-Linux/process.c b/arch/um/os-Linux/process.c index 7f5e2da..d261888 100644 --- a/arch/um/os-Linux/process.c +++ b/arch/um/os-Linux/process.c @@ -19,6 +19,7 @@ #include "irq_user.h" #include "kern_util.h" #include "longjmp.h" +#include "skas_ptrace.h" #define ARBITRARY_ADDR -1 #define FAILURE_PID -1 @@ -100,6 +101,21 @@ void os_kill_process(int pid, int reap_child) } +/* This is here uniquely to have access to the userspace errno, i.e. the one + * used by ptrace in case of error. + */ + +long os_ptrace_ldt(long pid, long addr, long data) +{ + int ret; + + ret = ptrace(PTRACE_LDT, pid, addr, data); + + if (ret < 0) + return -errno; + return ret; +} + /* Kill off a ptraced child by all means available. kill it normally first, * then PTRACE_KILL it, then PTRACE_CONT it in case it's in a run state from * which it can't exit directly. diff --git a/arch/um/sys-i386/ldt.c b/arch/um/sys-i386/ldt.c index 1fa09a7..fe0877b 100644 --- a/arch/um/sys-i386/ldt.c +++ b/arch/um/sys-i386/ldt.c @@ -107,7 +107,7 @@ long write_ldt_entry(struct mm_id * mm_idp, int func, struct user_desc * desc, * So we need to switch child's mm into our userspace, then * later switch back. * - * Note: I'm unshure: should interrupts be disabled here? + * Note: I'm unsure: should interrupts be disabled here? */ if(!current->active_mm || current->active_mm == &init_mm || mm_idp != ¤t->active_mm->context.skas.id) @@ -129,9 +129,7 @@ long write_ldt_entry(struct mm_id * mm_idp, int func, struct user_desc * desc, pid = userspace_pid[cpu]; } - res = ptrace(PTRACE_LDT, pid, 0, (unsigned long) &ldt_op); - if(res) - res = errno; + res = os_ptrace_ldt(pid, 0, (unsigned long) &ldt_op); if(proc_mm) put_cpu(); @@ -181,8 +179,7 @@ static long read_ldt_from_host(void __user * ptr, unsigned long bytecount) */ cpu = get_cpu(); - res = ptrace(PTRACE_LDT, userspace_pid[cpu], 0, - (unsigned long) &ptrace_ldt); + res = os_ptrace_ldt(userspace_pid[cpu], 0, (unsigned long) &ptrace_ldt); put_cpu(); if(res < 0) goto out; diff --git a/arch/x86_64/Kconfig b/arch/x86_64/Kconfig index 2f9deca..e18eb79 100644 --- a/arch/x86_64/Kconfig +++ b/arch/x86_64/Kconfig @@ -354,21 +354,6 @@ config HPET_TIMER as it is off-chip. You can find the HPET spec at <http://www.intel.com/hardwaredesign/hpetspec.htm>. -config X86_PM_TIMER - bool "PM timer" if EMBEDDED - depends on ACPI - default y - help - Support the ACPI PM timer for time keeping. This is slow, - but is useful on some chipsets without HPET on systems with more - than one CPU. On a single processor or single socket multi core - system it is normally not required. - When the PM timer is active 64bit vsyscalls are disabled - and should not be enabled (/proc/sys/kernel/vsyscall64 should - not be changed). - The kernel selects the PM timer only as a last resort, so it is - useful to enable just in case. - config HPET_EMULATE_RTC bool "Provide RTC interrupt" depends on HPET_TIMER && RTC=y @@ -592,6 +577,7 @@ source "arch/x86_64/oprofile/Kconfig" config KPROBES bool "Kprobes (EXPERIMENTAL)" + depends on EXPERIMENTAL && MODULES help Kprobes allows you to trap at almost any kernel address and execute a callback function. register_kprobe() establishes diff --git a/arch/x86_64/kernel/Makefile b/arch/x86_64/kernel/Makefile index 72fe60c..a098a11 100644 --- a/arch/x86_64/kernel/Makefile +++ b/arch/x86_64/kernel/Makefile @@ -43,7 +43,7 @@ CFLAGS_vsyscall.o := $(PROFILING) -g0 bootflag-y += ../../i386/kernel/bootflag.o cpuid-$(subst m,y,$(CONFIG_X86_CPUID)) += ../../i386/kernel/cpuid.o -topology-y += ../../i386/mach-default/topology.o +topology-y += ../../i386/kernel/topology.o microcode-$(subst m,y,$(CONFIG_MICROCODE)) += ../../i386/kernel/microcode.o intel_cacheinfo-y += ../../i386/kernel/cpu/intel_cacheinfo.o quirks-y += ../../i386/kernel/quirks.o diff --git a/arch/x86_64/kernel/aperture.c b/arch/x86_64/kernel/aperture.c index e4e2b7d..a0f955b 100644 --- a/arch/x86_64/kernel/aperture.c +++ b/arch/x86_64/kernel/aperture.c @@ -248,7 +248,7 @@ void __init iommu_hole_init(void) /* Got the aperture from the AGP bridge */ } else if (swiotlb && !valid_agp) { /* Do nothing */ - } else if ((!no_iommu && end_pfn >= MAX_DMA32_PFN) || + } else if ((!no_iommu && end_pfn > MAX_DMA32_PFN) || force_iommu || valid_agp || fallback_aper_force) { diff --git a/arch/x86_64/kernel/apic.c b/arch/x86_64/kernel/apic.c index e5b14c5..d70605e 100644 --- a/arch/x86_64/kernel/apic.c +++ b/arch/x86_64/kernel/apic.c @@ -962,12 +962,14 @@ void smp_apic_timer_interrupt(struct pt_regs *regs) irq_exit(); } +int __initdata unsync_tsc_on_multicluster; + /* * oem_force_hpet_timer -- force HPET mode for some boxes. * * Thus far, the major user of this is IBM's Summit2 series: * - * Clustered boxes may have unsynced TSC problems if they are + * Some clustered boxes may have unsynced TSC problems if they are * multi-chassis. Use available data to take a good guess. * If in doubt, go HPET. */ @@ -977,6 +979,11 @@ __cpuinit int oem_force_hpet_timer(void) unsigned id; DECLARE_BITMAP(clustermap, NUM_APIC_CLUSTERS); + /* Only do this check on IBM machines - big Unisys systems + use multiple clusters too, but have synchronized TSC */ + if (!unsync_tsc_on_multicluster) + return 0; + bitmap_zero(clustermap, NUM_APIC_CLUSTERS); for (i = 0; i < NR_CPUS; i++) { diff --git a/arch/x86_64/kernel/io_apic.c b/arch/x86_64/kernel/io_apic.c index 2585c1d..ffed464 100644 --- a/arch/x86_64/kernel/io_apic.c +++ b/arch/x86_64/kernel/io_apic.c @@ -50,6 +50,8 @@ static int no_timer_check; int disable_timer_pin_1 __initdata; +int timer_over_8254 __initdata = 1; + /* Where if anywhere is the i8259 connect in external int mode */ static struct { int pin, apic; } ioapic_i8259 = { -1, -1 }; @@ -251,6 +253,20 @@ static int __init enable_ioapic_setup(char *str) __setup("noapic", disable_ioapic_setup); __setup("apic", enable_ioapic_setup); +static int __init setup_disable_8254_timer(char *s) +{ + timer_over_8254 = -1; + return 1; +} +static int __init setup_enable_8254_timer(char *s) +{ + timer_over_8254 = 2; + return 1; +} + +__setup("disable_8254_timer", setup_disable_8254_timer); +__setup("enable_8254_timer", setup_enable_8254_timer); + #include <asm/pci-direct.h> #include <linux/pci_ids.h> #include <linux/pci.h> @@ -309,27 +325,20 @@ void __init check_ioapic(void) #endif /* RED-PEN skip them on mptables too? */ return; + + /* This should be actually default, but + for 2.6.16 let's do it for ATI only where + it's really needed. */ case PCI_VENDOR_ID_ATI: - if (apic_runs_main_timer != 0) - break; -#ifdef CONFIG_ACPI - /* Don't do this for laptops right - right now because their timer - doesn't necessarily tick in C2/3 */ - if (acpi_fadt.revision >= 3 && - (acpi_fadt.plvl2_lat + acpi_fadt.plvl3_lat) < 1100) { - printk(KERN_INFO -"ATI board detected, but seems to be a laptop. Timer might be shakey, sorry\n"); - break; - } -#endif + if (timer_over_8254 == 1) { + timer_over_8254 = 0; printk(KERN_INFO - "ATI board detected. Using APIC/PM timer.\n"); - apic_runs_main_timer = 1; - nohpet = 1; + "ATI board detected. Disabling timer routing over 8254.\n"); + } return; } + /* No multi-function device? */ type = read_pci_config_byte(num,slot,func, PCI_HEADER_TYPE); @@ -1773,6 +1782,8 @@ static inline void unlock_ExtINT_logic(void) * a wide range of boards and BIOS bugs. Fortunately only the timer IRQ * is so screwy. Thanks to Brian Perkins for testing/hacking this beast * fanatically on his truly buggy board. + * + * FIXME: really need to revamp this for modern platforms only. */ static inline void check_timer(void) { @@ -1795,7 +1806,8 @@ static inline void check_timer(void) */ apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT); init_8259A(1); - enable_8259A_irq(0); + if (timer_over_8254 > 0) + enable_8259A_irq(0); pin1 = find_isa_irq_pin(0, mp_INT); apic1 = find_isa_irq_apic(0, mp_INT); @@ -1850,7 +1862,7 @@ static inline void check_timer(void) } printk(" failed.\n"); - if (nmi_watchdog) { + if (nmi_watchdog == NMI_IO_APIC) { printk(KERN_WARNING "timer doesn't work through the IO-APIC - disabling NMI Watchdog!\n"); nmi_watchdog = 0; } diff --git a/arch/x86_64/kernel/pci-gart.c b/arch/x86_64/kernel/pci-gart.c index dd0718d..0c3f052 100644 --- a/arch/x86_64/kernel/pci-gart.c +++ b/arch/x86_64/kernel/pci-gart.c @@ -228,11 +228,6 @@ static inline int need_iommu(struct device *dev, unsigned long addr, size_t size int mmu = high; if (force_iommu) mmu = 1; - if (no_iommu) { - if (high) - panic("PCI-DMA: high address but no IOMMU.\n"); - mmu = 0; - } return mmu; } @@ -241,11 +236,6 @@ static inline int nonforced_iommu(struct device *dev, unsigned long addr, size_t u64 mask = *dev->dma_mask; int high = addr + size >= mask; int mmu = high; - if (no_iommu) { - if (high) - panic("PCI-DMA: high address but no IOMMU.\n"); - mmu = 0; - } return mmu; } @@ -310,7 +300,7 @@ void gart_unmap_sg(struct device *dev, struct scatterlist *sg, int nents, int di for (i = 0; i < nents; i++) { struct scatterlist *s = &sg[i]; - if (!s->dma_length) + if (!s->dma_length || !s->length) break; dma_unmap_single(dev, s->dma_address, s->dma_length, dir); } @@ -364,6 +354,7 @@ static int __dma_map_cont(struct scatterlist *sg, int start, int stopat, BUG_ON(i > start && s->offset); if (i == start) { + *sout = *s; sout->dma_address = iommu_bus_base; sout->dma_address += iommu_page*PAGE_SIZE + s->offset; sout->dma_length = s->length; @@ -390,6 +381,7 @@ static inline int dma_map_cont(struct scatterlist *sg, int start, int stopat, { if (!need) { BUG_ON(stopat - start != 1); + *sout = sg[start]; sout->dma_length = sg[start].length; return 0; } @@ -632,17 +624,13 @@ static int __init pci_iommu_init(void) (agp_copy_info(agp_bridge, &info) < 0); #endif - if (swiotlb) { - no_iommu = 1; + if (swiotlb) return -1; - } - + if (no_iommu || (!force_iommu && end_pfn <= MAX_DMA32_PFN) || !iommu_aperture || (no_agp && init_k8_gatt(&info) < 0)) { - no_iommu = 1; - no_iommu_init(); printk(KERN_INFO "PCI-DMA: Disabling IOMMU.\n"); if (end_pfn > MAX_DMA32_PFN) { printk(KERN_ERR "WARNING more than 4GB of memory " diff --git a/arch/x86_64/kernel/setup.c b/arch/x86_64/kernel/setup.c index 9435ab7..aa55e3c 100644 --- a/arch/x86_64/kernel/setup.c +++ b/arch/x86_64/kernel/setup.c @@ -423,6 +423,12 @@ static __init void parse_cmdline_early (char ** cmdline_p) else if(!memcmp(from, "elfcorehdr=", 11)) elfcorehdr_addr = memparse(from+11, &from); #endif + +#ifdef CONFIG_HOTPLUG_CPU + else if (!memcmp(from, "additional_cpus=", 16)) + setup_additional_cpus(from+16); +#endif + next_char: c = *(from++); if (!c) diff --git a/arch/x86_64/kernel/smpboot.c b/arch/x86_64/kernel/smpboot.c index 67e4e28..66e9865 100644 --- a/arch/x86_64/kernel/smpboot.c +++ b/arch/x86_64/kernel/smpboot.c @@ -1152,8 +1152,6 @@ void __init smp_cpus_done(unsigned int max_cpus) setup_ioapic_dest(); #endif - time_init_gtod(); - check_nmi_watchdog(); } @@ -1244,7 +1242,7 @@ void __cpu_die(unsigned int cpu) printk(KERN_ERR "CPU %u didn't die...\n", cpu); } -static __init int setup_additional_cpus(char *s) +__init int setup_additional_cpus(char *s) { return get_option(&s, &additional_cpus); } diff --git a/arch/x86_64/kernel/time.c b/arch/x86_64/kernel/time.c index 67841d1..3080f84 100644 --- a/arch/x86_64/kernel/time.c +++ b/arch/x86_64/kernel/time.c @@ -48,6 +48,8 @@ static void cpufreq_delayed_get(void); extern void i8254_timer_resume(void); extern int using_apic_timer; +static char *time_init_gtod(void); + DEFINE_SPINLOCK(rtc_lock); DEFINE_SPINLOCK(i8253_lock); @@ -901,6 +903,7 @@ static struct irqaction irq0 = { void __init time_init(void) { char *timename; + char *gtod; #ifdef HPET_HACK_ENABLE_DANGEROUS if (!vxtime.hpet_address) { @@ -945,21 +948,19 @@ void __init time_init(void) timename = "PIT"; } - printk(KERN_INFO "time.c: Using %ld.%06ld MHz %s timer.\n", - vxtime_hz / 1000000, vxtime_hz % 1000000, timename); + vxtime.mode = VXTIME_TSC; + gtod = time_init_gtod(); + + printk(KERN_INFO "time.c: Using %ld.%06ld MHz WALL %s GTOD %s timer.\n", + vxtime_hz / 1000000, vxtime_hz % 1000000, timename, gtod); printk(KERN_INFO "time.c: Detected %d.%03d MHz processor.\n", cpu_khz / 1000, cpu_khz % 1000); - vxtime.mode = VXTIME_TSC; vxtime.quot = (1000000L << 32) / vxtime_hz; vxtime.tsc_quot = (1000L << 32) / cpu_khz; vxtime.last_tsc = get_cycles_sync(); setup_irq(0, &irq0); set_cyc2ns_scale(cpu_khz); - -#ifndef CONFIG_SMP - time_init_gtod(); -#endif } /* @@ -981,9 +982,9 @@ __cpuinit int unsynchronized_tsc(void) } /* - * Decide after all CPUs are booted what mode gettimeofday should use. + * Decide what mode gettimeofday should use. */ -void __init time_init_gtod(void) +__init static char *time_init_gtod(void) { char *timetype; @@ -1011,8 +1012,7 @@ void __init time_init_gtod(void) timetype = hpet_use_timer ? "HPET/TSC" : "PIT/TSC"; vxtime.mode = VXTIME_TSC; } - - printk(KERN_INFO "time.c: Using %s based timekeeping.\n", timetype); + return timetype; } __setup("report_lost_ticks", time_setup); diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig index 0cce28c..33e2ca8 100644 --- a/drivers/acpi/Kconfig +++ b/drivers/acpi/Kconfig @@ -247,7 +247,7 @@ config ACPI_CUSTOM_DSDT_FILE Enter the full path name to the file wich includes the AmlCode declaration. config ACPI_BLACKLIST_YEAR - int "Disable ACPI for systems before Jan 1st this year" if X86 + int "Disable ACPI for systems before Jan 1st this year" if X86_32 default 0 help enter a 4-digit year, eg. 2001 to disable ACPI by default @@ -285,9 +285,8 @@ config ACPI_SYSTEM dump your ACPI DSDT table using /proc/acpi/dsdt. config X86_PM_TIMER - bool "Power Management Timer Support" + bool "Power Management Timer Support" if EMBEDDED depends on X86 - depends on !X86_64 default y help The Power Management Timer is available on all ACPI-capable, @@ -298,9 +297,8 @@ config X86_PM_TIMER voltage scaling, unlike the commonly used Time Stamp Counter (TSC) timing source. - So, if you see messages like 'Losing too many ticks!' in the - kernel logs, and/or you are using this on a notebook which - does not yet have an HPET, you should say "Y" here. + You should nearly always say Y here because many modern + systems require this timer. config ACPI_CONTAINER tristate "ACPI0004,PNP0A05 and PNP0A06 Container Driver (EXPERIMENTAL)" diff --git a/drivers/char/hvc_console.c b/drivers/char/hvc_console.c index 1994a92..f65b2e1 100644 --- a/drivers/char/hvc_console.c +++ b/drivers/char/hvc_console.c @@ -335,6 +335,8 @@ static int hvc_open(struct tty_struct *tty, struct file * filp) } /* else count == 0 */ tty->driver_data = hp; + tty->low_latency = 1; /* Makes flushes to ldisc synchronous. */ + hp->tty = tty; /* Save for request_irq outside of spin_lock. */ irq = hp->irq; @@ -633,9 +635,6 @@ static int hvc_poll(struct hvc_struct *hp) tty_insert_flip_char(tty, buf[i], 0); } - if (count) - tty_schedule_flip(tty); - /* * Account for the total amount read in one loop, and if above * 64 bytes, we do a quick schedule loop to let the tty grok @@ -656,6 +655,9 @@ static int hvc_poll(struct hvc_struct *hp) bail: spin_unlock_irqrestore(&hp->lock, flags); + if (read_total) + tty_flip_buffer_push(tty); + return poll_mask; } diff --git a/drivers/char/sx.c b/drivers/char/sx.c index c2490e2..588e75e 100644 --- a/drivers/char/sx.c +++ b/drivers/char/sx.c @@ -2173,15 +2173,17 @@ static int probe_si (struct sx_board *board) if ( IS_SI1_BOARD(board)) { /* This should be an SI1 board, which has this location writable... */ - if (read_sx_byte (board, SI2_ISA_ID_BASE) != 0x10) + if (read_sx_byte (board, SI2_ISA_ID_BASE) != 0x10) { func_exit (); return 0; + } } else { /* This should be an SI2 board, which has the bottom 3 bits non-writable... */ - if (read_sx_byte (board, SI2_ISA_ID_BASE) == 0x10) + if (read_sx_byte (board, SI2_ISA_ID_BASE) == 0x10) { func_exit (); return 0; + } } /* Now we're pretty much convinced that there is an SI board here, @@ -2192,15 +2194,17 @@ static int probe_si (struct sx_board *board) if ( IS_SI1_BOARD(board)) { /* This should be an SI1 board, which has this location writable... */ - if (read_sx_byte (board, SI2_ISA_ID_BASE) != 0x10) + if (read_sx_byte (board, SI2_ISA_ID_BASE) != 0x10) { func_exit(); return 0; + } } else { /* This should be an SI2 board, which has the bottom 3 bits non-writable... */ - if (read_sx_byte (board, SI2_ISA_ID_BASE) == 0x10) + if (read_sx_byte (board, SI2_ISA_ID_BASE) == 0x10) { func_exit (); return 0; + } } printheader (); diff --git a/drivers/ieee1394/sbp2.c b/drivers/ieee1394/sbp2.c index c2c776f..eca92eb 100644 --- a/drivers/ieee1394/sbp2.c +++ b/drivers/ieee1394/sbp2.c @@ -137,15 +137,15 @@ MODULE_PARM_DESC(exclusive_login, "Exclusive login to sbp2 device (default = 1)" /* * SCSI inquiry hack for really badly behaved sbp2 devices. Turn this on * if your sbp2 device is not properly handling the SCSI inquiry command. - * This hack makes the inquiry look more like a typical MS Windows - * inquiry. + * This hack makes the inquiry look more like a typical MS Windows inquiry + * by enforcing 36 byte inquiry and avoiding access to mode_sense page 8. * * If force_inquiry_hack=1 is required for your device to work, * please submit the logged sbp2_firmware_revision value of this device to * the linux1394-devel mailing list. */ static int force_inquiry_hack; -module_param(force_inquiry_hack, int, 0444); +module_param(force_inquiry_hack, int, 0644); MODULE_PARM_DESC(force_inquiry_hack, "Force SCSI inquiry hack (default = 0)"); /* @@ -264,18 +264,17 @@ static struct hpsb_protocol_driver sbp2_driver = { }, }; - -/* List of device firmware's that require a forced 36 byte inquiry. */ +/* + * List of device firmwares that require the inquiry hack. + * Yields a few false positives but did not break other devices so far. + */ static u32 sbp2_broken_inquiry_list[] = { - 0x00002800, /* Stefan Richter <richtest@bauwesen.tu-cottbus.de> */ + 0x00002800, /* Stefan Richter <stefanr@s5r6.in-berlin.de> */ /* DViCO Momobay CX-1 */ 0x00000200 /* Andreas Plesch <plesch@fas.harvard.edu> */ /* QPS Fire DVDBurner */ }; -#define NUM_BROKEN_INQUIRY_DEVS \ - (sizeof(sbp2_broken_inquiry_list)/sizeof(*sbp2_broken_inquiry_list)) - /************************************** * General utility functions **************************************/ @@ -643,9 +642,15 @@ static int sbp2_remove(struct device *dev) if (!scsi_id) return 0; - /* Trigger shutdown functions in scsi's highlevel. */ - if (scsi_id->scsi_host) + if (scsi_id->scsi_host) { + /* Get rid of enqueued commands if there is no chance to + * send them. */ + if (!sbp2util_node_is_available(scsi_id)) + sbp2scsi_complete_all_commands(scsi_id, DID_NO_CONNECT); + /* scsi_remove_device() will trigger shutdown functions of SCSI + * highlevel drivers which would deadlock if blocked. */ scsi_unblock_requests(scsi_id->scsi_host); + } sdev = scsi_id->sdev; if (sdev) { scsi_id->sdev = NULL; @@ -742,11 +747,6 @@ static struct scsi_id_instance_data *sbp2_alloc_device(struct unit_directory *ud hi->host = ud->ne->host; INIT_LIST_HEAD(&hi->scsi_ids); - /* Register our sbp2 status address space... */ - hpsb_register_addrspace(&sbp2_highlevel, ud->ne->host, &sbp2_ops, - SBP2_STATUS_FIFO_ADDRESS, - SBP2_STATUS_FIFO_ADDRESS + - SBP2_STATUS_FIFO_ENTRY_TO_OFFSET(SBP2_MAX_UDS_PER_NODE+1)); #ifdef CONFIG_IEEE1394_SBP2_PHYS_DMA /* Handle data movement if physical dma is not * enabled/supportedon host controller */ @@ -759,6 +759,18 @@ static struct scsi_id_instance_data *sbp2_alloc_device(struct unit_directory *ud list_add_tail(&scsi_id->scsi_list, &hi->scsi_ids); + /* Register the status FIFO address range. We could use the same FIFO + * for targets at different nodes. However we need different FIFOs per + * target in order to support multi-unit devices. */ + scsi_id->status_fifo_addr = hpsb_allocate_and_register_addrspace( + &sbp2_highlevel, ud->ne->host, &sbp2_ops, + sizeof(struct sbp2_status_block), sizeof(quadlet_t), + ~0ULL, ~0ULL); + if (!scsi_id->status_fifo_addr) { + SBP2_ERR("failed to allocate status FIFO address range"); + goto failed_alloc; + } + /* Register our host with the SCSI stack. */ scsi_host = scsi_host_alloc(&scsi_driver_template, sizeof(unsigned long)); @@ -997,6 +1009,10 @@ static void sbp2_remove_device(struct scsi_id_instance_data *scsi_id) SBP2_DMA_FREE("single query logins data"); } + if (scsi_id->status_fifo_addr) + hpsb_unregister_addrspace(&sbp2_highlevel, hi->host, + scsi_id->status_fifo_addr); + scsi_id->ud->device.driver_data = NULL; SBP2_DEBUG("SBP-2 device removed, SCSI ID = %d", scsi_id->ud->id); @@ -1075,11 +1091,10 @@ static int sbp2_query_logins(struct scsi_id_instance_data *scsi_id) ORB_SET_QUERY_LOGINS_RESP_LENGTH(sizeof(struct sbp2_query_logins_response)); SBP2_DEBUG("sbp2_query_logins: reserved_resp_length initialized"); - scsi_id->query_logins_orb->status_FIFO_lo = SBP2_STATUS_FIFO_ADDRESS_LO + - SBP2_STATUS_FIFO_ENTRY_TO_OFFSET(scsi_id->ud->id); - scsi_id->query_logins_orb->status_FIFO_hi = (ORB_SET_NODE_ID(hi->host->node_id) | - SBP2_STATUS_FIFO_ADDRESS_HI); - SBP2_DEBUG("sbp2_query_logins: status FIFO initialized"); + scsi_id->query_logins_orb->status_fifo_hi = + ORB_SET_STATUS_FIFO_HI(scsi_id->status_fifo_addr, hi->host->node_id); + scsi_id->query_logins_orb->status_fifo_lo = + ORB_SET_STATUS_FIFO_LO(scsi_id->status_fifo_addr); sbp2util_cpu_to_be32_buffer(scsi_id->query_logins_orb, sizeof(struct sbp2_query_logins_orb)); @@ -1184,11 +1199,10 @@ static int sbp2_login_device(struct scsi_id_instance_data *scsi_id) ORB_SET_LOGIN_RESP_LENGTH(sizeof(struct sbp2_login_response)); SBP2_DEBUG("sbp2_login_device: passwd_resp_lengths initialized"); - scsi_id->login_orb->status_FIFO_lo = SBP2_STATUS_FIFO_ADDRESS_LO + - SBP2_STATUS_FIFO_ENTRY_TO_OFFSET(scsi_id->ud->id); - scsi_id->login_orb->status_FIFO_hi = (ORB_SET_NODE_ID(hi->host->node_id) | - SBP2_STATUS_FIFO_ADDRESS_HI); - SBP2_DEBUG("sbp2_login_device: status FIFO initialized"); + scsi_id->login_orb->status_fifo_hi = + ORB_SET_STATUS_FIFO_HI(scsi_id->status_fifo_addr, hi->host->node_id); + scsi_id->login_orb->status_fifo_lo = + ORB_SET_STATUS_FIFO_LO(scsi_id->status_fifo_addr); /* * Byte swap ORB if necessary @@ -1301,10 +1315,10 @@ static int sbp2_logout_device(struct scsi_id_instance_data *scsi_id) scsi_id->logout_orb->login_ID_misc |= ORB_SET_NOTIFY(1); scsi_id->logout_orb->reserved5 = 0x0; - scsi_id->logout_orb->status_FIFO_lo = SBP2_STATUS_FIFO_ADDRESS_LO + - SBP2_STATUS_FIFO_ENTRY_TO_OFFSET(scsi_id->ud->id); - scsi_id->logout_orb->status_FIFO_hi = (ORB_SET_NODE_ID(hi->host->node_id) | - SBP2_STATUS_FIFO_ADDRESS_HI); + scsi_id->logout_orb->status_fifo_hi = + ORB_SET_STATUS_FIFO_HI(scsi_id->status_fifo_addr, hi->host->node_id); + scsi_id->logout_orb->status_fifo_lo = + ORB_SET_STATUS_FIFO_LO(scsi_id->status_fifo_addr); /* * Byte swap ORB if necessary @@ -1366,10 +1380,10 @@ static int sbp2_reconnect_device(struct scsi_id_instance_data *scsi_id) scsi_id->reconnect_orb->login_ID_misc |= ORB_SET_NOTIFY(1); scsi_id->reconnect_orb->reserved5 = 0x0; - scsi_id->reconnect_orb->status_FIFO_lo = SBP2_STATUS_FIFO_ADDRESS_LO + - SBP2_STATUS_FIFO_ENTRY_TO_OFFSET(scsi_id->ud->id); - scsi_id->reconnect_orb->status_FIFO_hi = - (ORB_SET_NODE_ID(hi->host->node_id) | SBP2_STATUS_FIFO_ADDRESS_HI); + scsi_id->reconnect_orb->status_fifo_hi = + ORB_SET_STATUS_FIFO_HI(scsi_id->status_fifo_addr, hi->host->node_id); + scsi_id->reconnect_orb->status_fifo_lo = + ORB_SET_STATUS_FIFO_LO(scsi_id->status_fifo_addr); /* * Byte swap ORB if necessary @@ -1560,7 +1574,7 @@ static void sbp2_parse_unit_directory(struct scsi_id_instance_data *scsi_id, /* Check for a blacklisted set of devices that require us to force * a 36 byte host inquiry. This can be overriden as a module param * (to force all hosts). */ - for (i = 0; i < NUM_BROKEN_INQUIRY_DEVS; i++) { + for (i = 0; i < ARRAY_SIZE(sbp2_broken_inquiry_list); i++) { if ((firmware_revision & 0xffff00) == sbp2_broken_inquiry_list[i]) { SBP2_WARN("Node " NODE_BUS_FMT ": Using 36byte inquiry workaround", @@ -2007,18 +2021,6 @@ static int sbp2_send_command(struct scsi_id_instance_data *scsi_id, } /* - * The scsi stack sends down a request_bufflen which does not match the - * length field in the scsi cdb. This causes some sbp2 devices to - * reject this inquiry command. Fix the request_bufflen. - */ - if (*cmd == INQUIRY) { - if (force_inquiry_hack || scsi_id->workarounds & SBP2_BREAKAGE_INQUIRY_HACK) - request_bufflen = cmd[4] = 0x24; - else - request_bufflen = cmd[4]; - } - - /* * Now actually fill in the comamnd orb and sbp2 s/g list */ sbp2_create_command_orb(scsi_id, command, cmd, SCpnt->use_sg, @@ -2106,7 +2108,6 @@ static int sbp2_handle_status_write(struct hpsb_host *host, int nodeid, int dest { struct sbp2scsi_host_info *hi; struct scsi_id_instance_data *scsi_id = NULL, *scsi_id_tmp; - u32 id; struct scsi_cmnd *SCpnt = NULL; u32 scsi_status = SBP2_SCSI_STATUS_GOOD; struct sbp2_command_info *command; @@ -2129,12 +2130,12 @@ static int sbp2_handle_status_write(struct hpsb_host *host, int nodeid, int dest } /* - * Find our scsi_id structure by looking at the status fifo address written to by - * the sbp2 device. + * Find our scsi_id structure by looking at the status fifo address + * written to by the sbp2 device. */ - id = SBP2_STATUS_FIFO_OFFSET_TO_ENTRY((u32)(addr - SBP2_STATUS_FIFO_ADDRESS)); list_for_each_entry(scsi_id_tmp, &hi->scsi_ids, scsi_list) { - if (scsi_id_tmp->ne->nodeid == nodeid && scsi_id_tmp->ud->id == id) { + if (scsi_id_tmp->ne->nodeid == nodeid && + scsi_id_tmp->status_fifo_addr == addr) { scsi_id = scsi_id_tmp; break; } @@ -2475,7 +2476,16 @@ static void sbp2scsi_complete_command(struct scsi_id_instance_data *scsi_id, static int sbp2scsi_slave_alloc(struct scsi_device *sdev) { - ((struct scsi_id_instance_data *)sdev->host->hostdata[0])->sdev = sdev; + struct scsi_id_instance_data *scsi_id = + (struct scsi_id_instance_data *)sdev->host->hostdata[0]; + + scsi_id->sdev = sdev; + + if (force_inquiry_hack || + scsi_id->workarounds & SBP2_BREAKAGE_INQUIRY_HACK) { + sdev->inquiry_len = 36; + sdev->skip_ms_page_8 = 1; + } return 0; } diff --git a/drivers/ieee1394/sbp2.h b/drivers/ieee1394/sbp2.h index 900ea1d..e2d357a 100644 --- a/drivers/ieee1394/sbp2.h +++ b/drivers/ieee1394/sbp2.h @@ -33,15 +33,17 @@ #define ORB_DIRECTION_NO_DATA_TRANSFER 0x2 #define ORB_SET_NULL_PTR(value) ((value & 0x1) << 31) -#define ORB_SET_NOTIFY(value) ((value & 0x1) << 31) -#define ORB_SET_RQ_FMT(value) ((value & 0x3) << 29) /* unused ? */ +#define ORB_SET_NOTIFY(value) ((value & 0x1) << 31) +#define ORB_SET_RQ_FMT(value) ((value & 0x3) << 29) /* unused ? */ #define ORB_SET_NODE_ID(value) ((value & 0xffff) << 16) -#define ORB_SET_DATA_SIZE(value) (value & 0xffff) -#define ORB_SET_PAGE_SIZE(value) ((value & 0x7) << 16) -#define ORB_SET_PAGE_TABLE_PRESENT(value) ((value & 0x1) << 19) -#define ORB_SET_MAX_PAYLOAD(value) ((value & 0xf) << 20) -#define ORB_SET_SPEED(value) ((value & 0x7) << 24) -#define ORB_SET_DIRECTION(value) ((value & 0x1) << 27) +#define ORB_SET_STATUS_FIFO_HI(value, id) (value >> 32 | ORB_SET_NODE_ID(id)) +#define ORB_SET_STATUS_FIFO_LO(value) (value & 0xffffffff) +#define ORB_SET_DATA_SIZE(value) (value & 0xffff) +#define ORB_SET_PAGE_SIZE(value) ((value & 0x7) << 16) +#define ORB_SET_PAGE_TABLE_PRESENT(value) ((value & 0x1) << 19) +#define ORB_SET_MAX_PAYLOAD(value) ((value & 0xf) << 20) +#define ORB_SET_SPEED(value) ((value & 0x7) << 24) +#define ORB_SET_DIRECTION(value) ((value & 0x1) << 27) struct sbp2_command_orb { volatile u32 next_ORB_hi; @@ -76,8 +78,8 @@ struct sbp2_login_orb { u32 login_response_lo; u32 lun_misc; u32 passwd_resp_lengths; - u32 status_FIFO_hi; - u32 status_FIFO_lo; + u32 status_fifo_hi; + u32 status_fifo_lo; }; #define RESPONSE_GET_LOGIN_ID(value) (value & 0xffff) @@ -102,8 +104,8 @@ struct sbp2_query_logins_orb { u32 query_response_lo; u32 lun_misc; u32 reserved_resp_length; - u32 status_FIFO_hi; - u32 status_FIFO_lo; + u32 status_fifo_hi; + u32 status_fifo_lo; }; #define RESPONSE_GET_MAX_LOGINS(value) (value & 0xffff) @@ -123,8 +125,8 @@ struct sbp2_reconnect_orb { u32 reserved4; u32 login_ID_misc; u32 reserved5; - u32 status_FIFO_hi; - u32 status_FIFO_lo; + u32 status_fifo_hi; + u32 status_fifo_lo; }; struct sbp2_logout_orb { @@ -134,8 +136,8 @@ struct sbp2_logout_orb { u32 reserved4; u32 login_ID_misc; u32 reserved5; - u32 status_FIFO_hi; - u32 status_FIFO_lo; + u32 status_fifo_hi; + u32 status_fifo_lo; }; #define PAGE_TABLE_SET_SEGMENT_BASE_HI(value) (value & 0xffff) @@ -195,30 +197,6 @@ struct sbp2_status_block { * Miscellaneous SBP2 related config rom defines */ -/* The status fifo address definition below is used as a base for each - * node, which a chunk seperately assigned to each unit directory in the - * node. For example, 0xfffe00000000ULL is used for the first sbp2 device - * detected on node 0, 0xfffe00000020ULL for the next sbp2 device on node - * 0, and so on. - * - * Note: We could use a single status fifo address for all sbp2 devices, - * and figure out which sbp2 device the status belongs to by looking at - * the source node id of the status write... but, using separate addresses - * for each sbp2 unit directory allows for better code and the ability to - * support multiple luns within a single 1394 node. - * - * Also note that we choose the address range below as it is a region - * specified for write posting, where the ohci controller will - * automatically send an ack_complete when the status is written by the - * sbp2 device... saving a split transaction. =) - */ -#define SBP2_STATUS_FIFO_ADDRESS 0xfffe00000000ULL -#define SBP2_STATUS_FIFO_ADDRESS_HI 0xfffe -#define SBP2_STATUS_FIFO_ADDRESS_LO 0x0 - -#define SBP2_STATUS_FIFO_ENTRY_TO_OFFSET(entry) ((entry) << 5) -#define SBP2_STATUS_FIFO_OFFSET_TO_ENTRY(offset) ((offset) >> 5) - #define SBP2_UNIT_DIRECTORY_OFFSET_KEY 0xd1 #define SBP2_CSR_OFFSET_KEY 0x54 #define SBP2_UNIT_SPEC_ID_KEY 0x12 @@ -258,7 +236,6 @@ struct sbp2_status_block { */ #define SBP2_MAX_SG_ELEMENT_LENGTH 0xf000 -#define SBP2_MAX_UDS_PER_NODE 16 /* Maximum scsi devices per node */ #define SBP2_MAX_SECTORS 255 /* Max sectors supported */ #define SBP2_MAX_CMDS 8 /* This should be safe */ @@ -338,6 +315,11 @@ struct scsi_id_instance_data { u32 sbp2_firmware_revision; /* + * Address for the device to write status blocks to + */ + u64 status_fifo_addr; + + /* * Variable used for logins, reconnects, logouts, query logins */ atomic_t sbp2_login_complete; diff --git a/drivers/md/dm.c b/drivers/md/dm.c index e9adeb9..745ca1f 100644 --- a/drivers/md/dm.c +++ b/drivers/md/dm.c @@ -849,10 +849,16 @@ static struct mapped_device *alloc_dev(unsigned int minor, int persistent) static void free_dev(struct mapped_device *md) { - free_minor(md->disk->first_minor); + unsigned int minor = md->disk->first_minor; + + if (md->suspended_bdev) { + thaw_bdev(md->suspended_bdev, NULL); + bdput(md->suspended_bdev); + } mempool_destroy(md->tio_pool); mempool_destroy(md->io_pool); del_gendisk(md->disk); + free_minor(minor); put_disk(md->disk); blk_put_queue(md->queue); kfree(md); diff --git a/drivers/mtd/chips/cfi_cmdset_0001.c b/drivers/mtd/chips/cfi_cmdset_0001.c index ded2c33..1c074d6 100644 --- a/drivers/mtd/chips/cfi_cmdset_0001.c +++ b/drivers/mtd/chips/cfi_cmdset_0001.c @@ -408,6 +408,7 @@ struct mtd_info *cfi_cmdset_0001(struct map_info *map, int primary) cfi->chips[i].buffer_write_time = 1<<cfi->cfiq->BufWriteTimeoutTyp; cfi->chips[i].erase_time = 1<<cfi->cfiq->BlockEraseTimeoutTyp; cfi->chips[i].ref_point_counter = 0; + init_waitqueue_head(&(cfi->chips[i].wq)); } map->fldrv = &cfi_intelext_chipdrv; diff --git a/drivers/net/ifb.c b/drivers/net/ifb.c index 1b69925..31fb2d7 100644 --- a/drivers/net/ifb.c +++ b/drivers/net/ifb.c @@ -57,7 +57,7 @@ struct ifb_private { struct sk_buff_head tq; }; -static int numifbs = 1; +static int numifbs = 2; static void ri_tasklet(unsigned long dev); static int ifb_xmit(struct sk_buff *skb, struct net_device *dev); diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c index 6e10184..8cc0d0b 100644 --- a/drivers/net/r8169.c +++ b/drivers/net/r8169.c @@ -287,6 +287,20 @@ enum RTL8169_register_content { TxInterFrameGapShift = 24, TxDMAShift = 8, /* DMA burst value (0-7) is shift this many bits */ + /* Config1 register p.24 */ + PMEnable = (1 << 0), /* Power Management Enable */ + + /* Config3 register p.25 */ + MagicPacket = (1 << 5), /* Wake up when receives a Magic Packet */ + LinkUp = (1 << 4), /* Wake up when the cable connection is re-established */ + + /* Config5 register p.27 */ + BWF = (1 << 6), /* Accept Broadcast wakeup frame */ + MWF = (1 << 5), /* Accept Multicast wakeup frame */ + UWF = (1 << 4), /* Accept Unicast wakeup frame */ + LanWake = (1 << 1), /* LanWake enable/disable */ + PMEStatus = (1 << 0), /* PME status can be reset by PCI RST# */ + /* TBICSR p.28 */ TBIReset = 0x80000000, TBILoopback = 0x40000000, @@ -433,6 +447,7 @@ struct rtl8169_private { unsigned int (*phy_reset_pending)(void __iomem *); unsigned int (*link_ok)(void __iomem *); struct work_struct task; + unsigned wol_enabled : 1; }; MODULE_AUTHOR("Realtek and the Linux r8169 crew <netdev@vger.kernel.org>"); @@ -607,6 +622,80 @@ static void rtl8169_link_option(int idx, u8 *autoneg, u16 *speed, u8 *duplex) *duplex = p->duplex; } +static void rtl8169_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol) +{ + struct rtl8169_private *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->mmio_addr; + u8 options; + + wol->wolopts = 0; + +#define WAKE_ANY (WAKE_PHY | WAKE_MAGIC | WAKE_UCAST | WAKE_BCAST | WAKE_MCAST) + wol->supported = WAKE_ANY; + + spin_lock_irq(&tp->lock); + + options = RTL_R8(Config1); + if (!(options & PMEnable)) + goto out_unlock; + + options = RTL_R8(Config3); + if (options & LinkUp) + wol->wolopts |= WAKE_PHY; + if (options & MagicPacket) + wol->wolopts |= WAKE_MAGIC; + + options = RTL_R8(Config5); + if (options & UWF) + wol->wolopts |= WAKE_UCAST; + if (options & BWF) + wol->wolopts |= WAKE_BCAST; + if (options & MWF) + wol->wolopts |= WAKE_MCAST; + +out_unlock: + spin_unlock_irq(&tp->lock); +} + +static int rtl8169_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol) +{ + struct rtl8169_private *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->mmio_addr; + int i; + static struct { + u32 opt; + u16 reg; + u8 mask; + } cfg[] = { + { WAKE_ANY, Config1, PMEnable }, + { WAKE_PHY, Config3, LinkUp }, + { WAKE_MAGIC, Config3, MagicPacket }, + { WAKE_UCAST, Config5, UWF }, + { WAKE_BCAST, Config5, BWF }, + { WAKE_MCAST, Config5, MWF }, + { WAKE_ANY, Config5, LanWake } + }; + + spin_lock_irq(&tp->lock); + + RTL_W8(Cfg9346, Cfg9346_Unlock); + + for (i = 0; i < ARRAY_SIZE(cfg); i++) { + u8 options = RTL_R8(cfg[i].reg) & ~cfg[i].mask; + if (wol->wolopts & cfg[i].opt) + options |= cfg[i].mask; + RTL_W8(cfg[i].reg, options); + } + + RTL_W8(Cfg9346, Cfg9346_Lock); + + tp->wol_enabled = (wol->wolopts) ? 1 : 0; + + spin_unlock_irq(&tp->lock); + + return 0; +} + static void rtl8169_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) { @@ -1025,6 +1114,8 @@ static struct ethtool_ops rtl8169_ethtool_ops = { .get_tso = ethtool_op_get_tso, .set_tso = ethtool_op_set_tso, .get_regs = rtl8169_get_regs, + .get_wol = rtl8169_get_wol, + .set_wol = rtl8169_set_wol, .get_strings = rtl8169_get_strings, .get_stats_count = rtl8169_get_stats_count, .get_ethtool_stats = rtl8169_get_ethtool_stats, @@ -1442,6 +1533,11 @@ rtl8169_init_board(struct pci_dev *pdev, struct net_device **dev_out, } tp->chipset = i; + RTL_W8(Cfg9346, Cfg9346_Unlock); + RTL_W8(Config1, RTL_R8(Config1) | PMEnable); + RTL_W8(Config5, RTL_R8(Config5) & PMEStatus); + RTL_W8(Cfg9346, Cfg9346_Lock); + *ioaddr_out = ioaddr; *dev_out = dev; out: @@ -1612,49 +1708,6 @@ rtl8169_remove_one(struct pci_dev *pdev) pci_set_drvdata(pdev, NULL); } -#ifdef CONFIG_PM - -static int rtl8169_suspend(struct pci_dev *pdev, pm_message_t state) -{ - struct net_device *dev = pci_get_drvdata(pdev); - struct rtl8169_private *tp = netdev_priv(dev); - void __iomem *ioaddr = tp->mmio_addr; - unsigned long flags; - - if (!netif_running(dev)) - return 0; - - netif_device_detach(dev); - netif_stop_queue(dev); - spin_lock_irqsave(&tp->lock, flags); - - /* Disable interrupts, stop Rx and Tx */ - RTL_W16(IntrMask, 0); - RTL_W8(ChipCmd, 0); - - /* Update the error counts. */ - tp->stats.rx_missed_errors += RTL_R32(RxMissed); - RTL_W32(RxMissed, 0); - spin_unlock_irqrestore(&tp->lock, flags); - - return 0; -} - -static int rtl8169_resume(struct pci_dev *pdev) -{ - struct net_device *dev = pci_get_drvdata(pdev); - - if (!netif_running(dev)) - return 0; - - netif_device_attach(dev); - rtl8169_hw_start(dev); - - return 0; -} - -#endif /* CONFIG_PM */ - static void rtl8169_set_rxbufsize(struct rtl8169_private *tp, struct net_device *dev) { @@ -2700,6 +2753,56 @@ static struct net_device_stats *rtl8169_get_stats(struct net_device *dev) return &tp->stats; } +#ifdef CONFIG_PM + +static int rtl8169_suspend(struct pci_dev *pdev, pm_message_t state) +{ + struct net_device *dev = pci_get_drvdata(pdev); + struct rtl8169_private *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->mmio_addr; + + if (!netif_running(dev)) + goto out; + + netif_device_detach(dev); + netif_stop_queue(dev); + + spin_lock_irq(&tp->lock); + + rtl8169_asic_down(ioaddr); + + tp->stats.rx_missed_errors += RTL_R32(RxMissed); + RTL_W32(RxMissed, 0); + + spin_unlock_irq(&tp->lock); + + pci_save_state(pdev); + pci_enable_wake(pdev, pci_choose_state(pdev, state), tp->wol_enabled); + pci_set_power_state(pdev, pci_choose_state(pdev, state)); +out: + return 0; +} + +static int rtl8169_resume(struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + + if (!netif_running(dev)) + goto out; + + netif_device_attach(dev); + + pci_set_power_state(pdev, PCI_D0); + pci_restore_state(pdev); + pci_enable_wake(pdev, PCI_D0, 0); + + rtl8169_schedule_work(dev, rtl8169_reset_task); +out: + return 0; +} + +#endif /* CONFIG_PM */ + static struct pci_driver rtl8169_pci_driver = { .name = MODULENAME, .id_table = rtl8169_pci_tbl, diff --git a/drivers/net/skge.c b/drivers/net/skge.c index 67fb19b..25e028b 100644 --- a/drivers/net/skge.c +++ b/drivers/net/skge.c @@ -879,13 +879,12 @@ static int __xm_phy_read(struct skge_hw *hw, int port, u16 reg, u16 *val) int i; xm_write16(hw, port, XM_PHY_ADDR, reg | hw->phy_addr); - xm_read16(hw, port, XM_PHY_DATA); + *val = xm_read16(hw, port, XM_PHY_DATA); - /* Need to wait for external PHY */ for (i = 0; i < PHY_RETRIES; i++) { - udelay(1); if (xm_read16(hw, port, XM_MMU_CMD) & XM_MMU_PHY_RDY) goto ready; + udelay(1); } return -ETIMEDOUT; @@ -918,7 +917,12 @@ static int xm_phy_write(struct skge_hw *hw, int port, u16 reg, u16 val) ready: xm_write16(hw, port, XM_PHY_DATA, val); - return 0; + for (i = 0; i < PHY_RETRIES; i++) { + if (!(xm_read16(hw, port, XM_MMU_CMD) & XM_MMU_PHY_BUSY)) + return 0; + udelay(1); + } + return -ETIMEDOUT; } static void genesis_init(struct skge_hw *hw) @@ -1168,13 +1172,17 @@ static void genesis_mac_init(struct skge_hw *hw, int port) u32 r; const u8 zero[6] = { 0 }; - /* Clear MIB counters */ - xm_write16(hw, port, XM_STAT_CMD, - XM_SC_CLR_RXC | XM_SC_CLR_TXC); - /* Clear two times according to Errata #3 */ - xm_write16(hw, port, XM_STAT_CMD, - XM_SC_CLR_RXC | XM_SC_CLR_TXC); + for (i = 0; i < 10; i++) { + skge_write16(hw, SK_REG(port, TX_MFF_CTRL1), + MFF_SET_MAC_RST); + if (skge_read16(hw, SK_REG(port, TX_MFF_CTRL1)) & MFF_SET_MAC_RST) + goto reset_ok; + udelay(1); + } + + printk(KERN_WARNING PFX "%s: genesis reset failed\n", dev->name); + reset_ok: /* Unreset the XMAC. */ skge_write16(hw, SK_REG(port, TX_MFF_CTRL1), MFF_CLR_MAC_RST); @@ -1191,7 +1199,7 @@ static void genesis_mac_init(struct skge_hw *hw, int port) r |= GP_DIR_2|GP_IO_2; skge_write32(hw, B2_GP_IO, r); - skge_read32(hw, B2_GP_IO); + /* Enable GMII interface */ xm_write16(hw, port, XM_HW_CFG, XM_HW_GMII_MD); @@ -1205,6 +1213,13 @@ static void genesis_mac_init(struct skge_hw *hw, int port) for (i = 1; i < 16; i++) xm_outaddr(hw, port, XM_EXM(i), zero); + /* Clear MIB counters */ + xm_write16(hw, port, XM_STAT_CMD, + XM_SC_CLR_RXC | XM_SC_CLR_TXC); + /* Clear two times according to Errata #3 */ + xm_write16(hw, port, XM_STAT_CMD, + XM_SC_CLR_RXC | XM_SC_CLR_TXC); + /* configure Rx High Water Mark (XM_RX_HI_WM) */ xm_write16(hw, port, XM_RX_HI_WM, 1450); @@ -2170,8 +2185,10 @@ static int skge_up(struct net_device *dev) skge->tx_avail = skge->tx_ring.count - 1; /* Enable IRQ from port */ + spin_lock_irq(&hw->hw_lock); hw->intr_mask |= portirqmask[port]; skge_write32(hw, B0_IMSK, hw->intr_mask); + spin_unlock_irq(&hw->hw_lock); /* Initialize MAC */ spin_lock_bh(&hw->phy_lock); @@ -2229,8 +2246,10 @@ static int skge_down(struct net_device *dev) else yukon_stop(skge); + spin_lock_irq(&hw->hw_lock); hw->intr_mask &= ~portirqmask[skge->port]; skge_write32(hw, B0_IMSK, hw->intr_mask); + spin_unlock_irq(&hw->hw_lock); /* Stop transmitter */ skge_write8(hw, Q_ADDR(txqaddr[port], Q_CSR), CSR_STOP); @@ -2678,8 +2697,7 @@ static int skge_poll(struct net_device *dev, int *budget) /* restart receiver */ wmb(); - skge_write8(hw, Q_ADDR(rxqaddr[skge->port], Q_CSR), - CSR_START | CSR_IRQ_CL_F); + skge_write8(hw, Q_ADDR(rxqaddr[skge->port], Q_CSR), CSR_START); *budget -= work_done; dev->quota -= work_done; @@ -2687,10 +2705,11 @@ static int skge_poll(struct net_device *dev, int *budget) if (work_done >= to_do) return 1; /* not done */ - netif_rx_complete(dev); - hw->intr_mask |= portirqmask[skge->port]; - skge_write32(hw, B0_IMSK, hw->intr_mask); - skge_read32(hw, B0_IMSK); + spin_lock_irq(&hw->hw_lock); + __netif_rx_complete(dev); + hw->intr_mask |= portirqmask[skge->port]; + skge_write32(hw, B0_IMSK, hw->intr_mask); + spin_unlock_irq(&hw->hw_lock); return 0; } @@ -2850,18 +2869,10 @@ static void skge_extirq(unsigned long data) } spin_unlock(&hw->phy_lock); - local_irq_disable(); + spin_lock_irq(&hw->hw_lock); hw->intr_mask |= IS_EXT_REG; skge_write32(hw, B0_IMSK, hw->intr_mask); - local_irq_enable(); -} - -static inline void skge_wakeup(struct net_device *dev) -{ - struct skge_port *skge = netdev_priv(dev); - - prefetch(skge->rx_ring.to_clean); - netif_rx_schedule(dev); + spin_unlock_irq(&hw->hw_lock); } static irqreturn_t skge_intr(int irq, void *dev_id, struct pt_regs *regs) @@ -2872,15 +2883,17 @@ static irqreturn_t skge_intr(int irq, void *dev_id, struct pt_regs *regs) if (status == 0 || status == ~0) /* hotplug or shared irq */ return IRQ_NONE; - status &= hw->intr_mask; + spin_lock(&hw->hw_lock); if (status & IS_R1_F) { + skge_write8(hw, Q_ADDR(Q_R1, Q_CSR), CSR_IRQ_CL_F); hw->intr_mask &= ~IS_R1_F; - skge_wakeup(hw->dev[0]); + netif_rx_schedule(hw->dev[0]); } if (status & IS_R2_F) { + skge_write8(hw, Q_ADDR(Q_R2, Q_CSR), CSR_IRQ_CL_F); hw->intr_mask &= ~IS_R2_F; - skge_wakeup(hw->dev[1]); + netif_rx_schedule(hw->dev[1]); } if (status & IS_XA1_F) @@ -2922,6 +2935,7 @@ static irqreturn_t skge_intr(int irq, void *dev_id, struct pt_regs *regs) } skge_write32(hw, B0_IMSK, hw->intr_mask); + spin_unlock(&hw->hw_lock); return IRQ_HANDLED; } @@ -3290,6 +3304,7 @@ static int __devinit skge_probe(struct pci_dev *pdev, hw->pdev = pdev; spin_lock_init(&hw->phy_lock); + spin_lock_init(&hw->hw_lock); tasklet_init(&hw->ext_tasklet, skge_extirq, (unsigned long) hw); hw->regs = ioremap_nocache(pci_resource_start(pdev, 0), 0x4000); diff --git a/drivers/net/skge.h b/drivers/net/skge.h index 2efdacc..941f12a 100644 --- a/drivers/net/skge.h +++ b/drivers/net/skge.h @@ -2402,6 +2402,7 @@ struct skge_hw { struct tasklet_struct ext_tasklet; spinlock_t phy_lock; + spinlock_t hw_lock; }; enum { diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index bfeba5b..ca8160d 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -195,11 +195,11 @@ static int sky2_set_power_state(struct sky2_hw *hw, pci_power_t state) pr_debug("sky2_set_power_state %d\n", state); sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON); - pci_read_config_word(hw->pdev, hw->pm_cap + PCI_PM_PMC, &power_control); + power_control = sky2_pci_read16(hw, hw->pm_cap + PCI_PM_PMC); vaux = (sky2_read16(hw, B0_CTST) & Y2_VAUX_AVAIL) && (power_control & PCI_PM_CAP_PME_D3cold); - pci_read_config_word(hw->pdev, hw->pm_cap + PCI_PM_CTRL, &power_control); + power_control = sky2_pci_read16(hw, hw->pm_cap + PCI_PM_CTRL); power_control |= PCI_PM_CTRL_PME_STATUS; power_control &= ~(PCI_PM_CTRL_STATE_MASK); @@ -223,7 +223,7 @@ static int sky2_set_power_state(struct sky2_hw *hw, pci_power_t state) sky2_write8(hw, B2_Y2_CLK_GATE, 0); /* Turn off phy power saving */ - pci_read_config_dword(hw->pdev, PCI_DEV_REG1, ®1); + reg1 = sky2_pci_read32(hw, PCI_DEV_REG1); reg1 &= ~(PCI_Y2_PHY1_POWD | PCI_Y2_PHY2_POWD); /* looks like this XL is back asswards .. */ @@ -232,18 +232,28 @@ static int sky2_set_power_state(struct sky2_hw *hw, pci_power_t state) if (hw->ports > 1) reg1 |= PCI_Y2_PHY2_COMA; } - pci_write_config_dword(hw->pdev, PCI_DEV_REG1, reg1); + + if (hw->chip_id == CHIP_ID_YUKON_EC_U) { + sky2_pci_write32(hw, PCI_DEV_REG3, 0); + reg1 = sky2_pci_read32(hw, PCI_DEV_REG4); + reg1 &= P_ASPM_CONTROL_MSK; + sky2_pci_write32(hw, PCI_DEV_REG4, reg1); + sky2_pci_write32(hw, PCI_DEV_REG5, 0); + } + + sky2_pci_write32(hw, PCI_DEV_REG1, reg1); + break; case PCI_D3hot: case PCI_D3cold: /* Turn on phy power saving */ - pci_read_config_dword(hw->pdev, PCI_DEV_REG1, ®1); + reg1 = sky2_pci_read32(hw, PCI_DEV_REG1); if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1) reg1 &= ~(PCI_Y2_PHY1_POWD | PCI_Y2_PHY2_POWD); else reg1 |= (PCI_Y2_PHY1_POWD | PCI_Y2_PHY2_POWD); - pci_write_config_dword(hw->pdev, PCI_DEV_REG1, reg1); + sky2_pci_write32(hw, PCI_DEV_REG1, reg1); if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1) sky2_write8(hw, B2_Y2_CLK_GATE, 0); @@ -265,7 +275,7 @@ static int sky2_set_power_state(struct sky2_hw *hw, pci_power_t state) ret = -1; } - pci_write_config_byte(hw->pdev, hw->pm_cap + PCI_PM_CTRL, power_control); + sky2_pci_write16(hw, hw->pm_cap + PCI_PM_CTRL, power_control); sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF); return ret; } @@ -463,16 +473,31 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port) ledover |= PHY_M_LED_MO_RX(MO_LED_OFF); } - gm_phy_write(hw, port, PHY_MARV_LED_CTRL, ledctrl); + if (hw->chip_id == CHIP_ID_YUKON_EC_U && hw->chip_rev >= 2) { + /* apply fixes in PHY AFE */ + gm_phy_write(hw, port, 22, 255); + /* increase differential signal amplitude in 10BASE-T */ + gm_phy_write(hw, port, 24, 0xaa99); + gm_phy_write(hw, port, 23, 0x2011); - if (sky2->autoneg == AUTONEG_DISABLE || sky2->speed == SPEED_100) { - /* turn on 100 Mbps LED (LED_LINK100) */ - ledover |= PHY_M_LED_MO_100(MO_LED_ON); - } + /* fix for IEEE A/B Symmetry failure in 1000BASE-T */ + gm_phy_write(hw, port, 24, 0xa204); + gm_phy_write(hw, port, 23, 0x2002); - if (ledover) - gm_phy_write(hw, port, PHY_MARV_LED_OVER, ledover); + /* set page register to 0 */ + gm_phy_write(hw, port, 22, 0); + } else { + gm_phy_write(hw, port, PHY_MARV_LED_CTRL, ledctrl); + if (sky2->autoneg == AUTONEG_DISABLE || sky2->speed == SPEED_100) { + /* turn on 100 Mbps LED (LED_LINK100) */ + ledover |= PHY_M_LED_MO_100(MO_LED_ON); + } + + if (ledover) + gm_phy_write(hw, port, PHY_MARV_LED_OVER, ledover); + + } /* Enable phy interrupt on auto-negotiation complete (or link up) */ if (sky2->autoneg == AUTONEG_ENABLE) gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_IS_AN_COMPL); @@ -953,6 +978,12 @@ static int sky2_rx_start(struct sky2_port *sky2) sky2->rx_put = sky2->rx_next = 0; sky2_qset(hw, rxq); + + if (hw->chip_id == CHIP_ID_YUKON_EC_U && hw->chip_rev >= 2) { + /* MAC Rx RAM Read is controlled by hardware */ + sky2_write32(hw, Q_ADDR(rxq, Q_F), F_M_RX_RAM_DIS); + } + sky2_prefetch_init(hw, rxq, sky2->rx_le_map, RX_LE_SIZE - 1); rx_set_checksum(sky2); @@ -1035,9 +1066,10 @@ static int sky2_up(struct net_device *dev) RB_RST_SET); sky2_qset(hw, txqaddr[port]); - if (hw->chip_id == CHIP_ID_YUKON_EC_U) - sky2_write16(hw, Q_ADDR(txqaddr[port], Q_AL), 0x1a0); + /* Set almost empty threshold */ + if (hw->chip_id == CHIP_ID_YUKON_EC_U && hw->chip_rev == 1) + sky2_write16(hw, Q_ADDR(txqaddr[port], Q_AL), 0x1a0); sky2_prefetch_init(hw, txqaddr[port], sky2->tx_le_map, TX_RING_SIZE - 1); @@ -1047,8 +1079,10 @@ static int sky2_up(struct net_device *dev) goto err_out; /* Enable interrupts from phy/mac for port */ + spin_lock_irq(&hw->hw_lock); hw->intr_mask |= (port == 0) ? Y2_IS_PORT_1 : Y2_IS_PORT_2; sky2_write32(hw, B0_IMSK, hw->intr_mask); + spin_unlock_irq(&hw->hw_lock); return 0; err_out: @@ -1348,10 +1382,10 @@ static int sky2_down(struct net_device *dev) netif_stop_queue(dev); /* Disable port IRQ */ - local_irq_disable(); + spin_lock_irq(&hw->hw_lock); hw->intr_mask &= ~((sky2->port == 0) ? Y2_IS_IRQ_PHY1 : Y2_IS_IRQ_PHY2); sky2_write32(hw, B0_IMSK, hw->intr_mask); - local_irq_enable(); + spin_unlock_irq(&hw->hw_lock); flush_scheduled_work(); @@ -1633,10 +1667,10 @@ static void sky2_phy_task(void *arg) out: up(&sky2->phy_sema); - local_irq_disable(); + spin_lock_irq(&hw->hw_lock); hw->intr_mask |= (sky2->port == 0) ? Y2_IS_IRQ_PHY1 : Y2_IS_IRQ_PHY2; sky2_write32(hw, B0_IMSK, hw->intr_mask); - local_irq_enable(); + spin_unlock_irq(&hw->hw_lock); } @@ -1863,6 +1897,17 @@ static int sky2_poll(struct net_device *dev0, int *budget) sky2_write32(hw, STAT_CTRL, SC_STAT_CLR_IRQ); + /* + * Kick the STAT_LEV_TIMER_CTRL timer. + * This fixes my hangs on Yukon-EC (0xb6) rev 1. + * The if clause is there to start the timer only if it has been + * configured correctly and not been disabled via ethtool. + */ + if (sky2_read8(hw, STAT_LEV_TIMER_CTRL) == TIM_START) { + sky2_write8(hw, STAT_LEV_TIMER_CTRL, TIM_STOP); + sky2_write8(hw, STAT_LEV_TIMER_CTRL, TIM_START); + } + hwidx = sky2_read16(hw, STAT_PUT_IDX); BUG_ON(hwidx >= STATUS_RING_SIZE); rmb(); @@ -1945,16 +1990,19 @@ exit_loop: sky2_tx_check(hw, 0, tx_done[0]); sky2_tx_check(hw, 1, tx_done[1]); + if (sky2_read8(hw, STAT_TX_TIMER_CTRL) == TIM_START) { + sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_STOP); + sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_START); + } + if (likely(work_done < to_do)) { - /* need to restart TX timer */ - if (is_ec_a1(hw)) { - sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_STOP); - sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_START); - } + spin_lock_irq(&hw->hw_lock); + __netif_rx_complete(dev0); - netif_rx_complete(dev0); hw->intr_mask |= Y2_IS_STAT_BMU; sky2_write32(hw, B0_IMSK, hw->intr_mask); + spin_unlock_irq(&hw->hw_lock); + return 0; } else { *budget -= work_done; @@ -2017,13 +2065,13 @@ static void sky2_hw_intr(struct sky2_hw *hw) if (status & (Y2_IS_MST_ERR | Y2_IS_IRQ_STAT)) { u16 pci_err; - pci_read_config_word(hw->pdev, PCI_STATUS, &pci_err); + pci_err = sky2_pci_read16(hw, PCI_STATUS); if (net_ratelimit()) printk(KERN_ERR PFX "%s: pci hw error (0x%x)\n", pci_name(hw->pdev), pci_err); sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON); - pci_write_config_word(hw->pdev, PCI_STATUS, + sky2_pci_write16(hw, PCI_STATUS, pci_err | PCI_STATUS_ERROR_BITS); sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF); } @@ -2032,7 +2080,7 @@ static void sky2_hw_intr(struct sky2_hw *hw) /* PCI-Express uncorrectable Error occurred */ u32 pex_err; - pci_read_config_dword(hw->pdev, PEX_UNC_ERR_STAT, &pex_err); + pex_err = sky2_pci_read32(hw, PEX_UNC_ERR_STAT); if (net_ratelimit()) printk(KERN_ERR PFX "%s: pci express error (0x%x)\n", @@ -2040,7 +2088,7 @@ static void sky2_hw_intr(struct sky2_hw *hw) /* clear the interrupt */ sky2_write32(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON); - pci_write_config_dword(hw->pdev, PEX_UNC_ERR_STAT, + sky2_pci_write32(hw, PEX_UNC_ERR_STAT, 0xffffffffUL); sky2_write32(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF); @@ -2086,6 +2134,7 @@ static void sky2_phy_intr(struct sky2_hw *hw, unsigned port) hw->intr_mask &= ~(port == 0 ? Y2_IS_IRQ_PHY1 : Y2_IS_IRQ_PHY2); sky2_write32(hw, B0_IMSK, hw->intr_mask); + schedule_work(&sky2->phy_task); } @@ -2099,6 +2148,7 @@ static irqreturn_t sky2_intr(int irq, void *dev_id, struct pt_regs *regs) if (status == 0 || status == ~0) return IRQ_NONE; + spin_lock(&hw->hw_lock); if (status & Y2_IS_HW_ERR) sky2_hw_intr(hw); @@ -2127,7 +2177,7 @@ static irqreturn_t sky2_intr(int irq, void *dev_id, struct pt_regs *regs) sky2_write32(hw, B0_Y2_SP_ICR, 2); - sky2_read32(hw, B0_IMSK); + spin_unlock(&hw->hw_lock); return IRQ_HANDLED; } @@ -2170,7 +2220,7 @@ static int sky2_reset(struct sky2_hw *hw) { u16 status; u8 t8, pmd_type; - int i, err; + int i; sky2_write8(hw, B0_CTST, CS_RST_CLR); @@ -2192,25 +2242,18 @@ static int sky2_reset(struct sky2_hw *hw) sky2_write8(hw, B0_CTST, CS_RST_CLR); /* clear PCI errors, if any */ - err = pci_read_config_word(hw->pdev, PCI_STATUS, &status); - if (err) - goto pci_err; + status = sky2_pci_read16(hw, PCI_STATUS); sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON); - err = pci_write_config_word(hw->pdev, PCI_STATUS, - status | PCI_STATUS_ERROR_BITS); - if (err) - goto pci_err; + sky2_pci_write16(hw, PCI_STATUS, status | PCI_STATUS_ERROR_BITS); + sky2_write8(hw, B0_CTST, CS_MRST_CLR); /* clear any PEX errors */ - if (pci_find_capability(hw->pdev, PCI_CAP_ID_EXP)) { - err = pci_write_config_dword(hw->pdev, PEX_UNC_ERR_STAT, - 0xffffffffUL); - if (err) - goto pci_err; - } + if (pci_find_capability(hw->pdev, PCI_CAP_ID_EXP)) + sky2_pci_write32(hw, PEX_UNC_ERR_STAT, 0xffffffffUL); + pmd_type = sky2_read8(hw, B2_PMD_TYP); hw->copper = !(pmd_type == 'L' || pmd_type == 'S'); @@ -2309,8 +2352,7 @@ static int sky2_reset(struct sky2_hw *hw) sky2_write8(hw, STAT_FIFO_ISR_WM, 16); sky2_write32(hw, STAT_TX_TIMER_INI, sky2_us2clk(hw, 1000)); - sky2_write32(hw, STAT_LEV_TIMER_INI, sky2_us2clk(hw, 100)); - sky2_write32(hw, STAT_ISR_TIMER_INI, sky2_us2clk(hw, 20)); + sky2_write32(hw, STAT_ISR_TIMER_INI, sky2_us2clk(hw, 7)); } /* enable status unit */ @@ -2321,14 +2363,6 @@ static int sky2_reset(struct sky2_hw *hw) sky2_write8(hw, STAT_ISR_TIMER_CTRL, TIM_START); return 0; - -pci_err: - /* This is to catch a BIOS bug workaround where - * mmconfig table doesn't have other buses. - */ - printk(KERN_ERR PFX "%s: can't access PCI config space\n", - pci_name(hw->pdev)); - return err; } static u32 sky2_supported_modes(const struct sky2_hw *hw) @@ -2852,11 +2886,11 @@ static int sky2_set_coalesce(struct net_device *dev, (ecmd->rx_coalesce_usecs_irq < tmin || ecmd->rx_coalesce_usecs_irq > tmax)) return -EINVAL; - if (ecmd->tx_max_coalesced_frames > 0xffff) + if (ecmd->tx_max_coalesced_frames >= TX_RING_SIZE-1) return -EINVAL; - if (ecmd->rx_max_coalesced_frames > 0xff) + if (ecmd->rx_max_coalesced_frames > RX_MAX_PENDING) return -EINVAL; - if (ecmd->rx_max_coalesced_frames_irq > 0xff) + if (ecmd->rx_max_coalesced_frames_irq >RX_MAX_PENDING) return -EINVAL; if (ecmd->tx_coalesce_usecs == 0) @@ -3198,17 +3232,6 @@ static int __devinit sky2_probe(struct pci_dev *pdev, } } -#ifdef __BIG_ENDIAN - /* byte swap descriptors in hardware */ - { - u32 reg; - - pci_read_config_dword(pdev, PCI_DEV_REG2, ®); - reg |= PCI_REV_DESC; - pci_write_config_dword(pdev, PCI_DEV_REG2, reg); - } -#endif - err = -ENOMEM; hw = kzalloc(sizeof(*hw), GFP_KERNEL); if (!hw) { @@ -3226,6 +3249,18 @@ static int __devinit sky2_probe(struct pci_dev *pdev, goto err_out_free_hw; } hw->pm_cap = pm_cap; + spin_lock_init(&hw->hw_lock); + +#ifdef __BIG_ENDIAN + /* byte swap descriptors in hardware */ + { + u32 reg; + + reg = sky2_pci_read32(hw, PCI_DEV_REG2); + reg |= PCI_REV_DESC; + sky2_pci_write32(hw, PCI_DEV_REG2, reg); + } +#endif /* ring for status responses */ hw->st_le = pci_alloc_consistent(hw->pdev, STATUS_LE_BYTES, diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h index fd12c28..3edb980 100644 --- a/drivers/net/sky2.h +++ b/drivers/net/sky2.h @@ -5,14 +5,22 @@ #define _SKY2_H /* PCI config registers */ -#define PCI_DEV_REG1 0x40 -#define PCI_DEV_REG2 0x44 -#define PCI_DEV_STATUS 0x7c -#define PCI_OS_PCI_X (1<<26) +enum { + PCI_DEV_REG1 = 0x40, + PCI_DEV_REG2 = 0x44, + PCI_DEV_STATUS = 0x7c, + PCI_DEV_REG3 = 0x80, + PCI_DEV_REG4 = 0x84, + PCI_DEV_REG5 = 0x88, +}; -#define PEX_LNK_STAT 0xf2 -#define PEX_UNC_ERR_STAT 0x104 -#define PEX_DEV_CTRL 0xe8 +enum { + PEX_DEV_CAP = 0xe4, + PEX_DEV_CTRL = 0xe8, + PEX_DEV_STA = 0xea, + PEX_LNK_STAT = 0xf2, + PEX_UNC_ERR_STAT= 0x104, +}; /* Yukon-2 */ enum pci_dev_reg_1 { @@ -37,6 +45,25 @@ enum pci_dev_reg_2 { PCI_USEDATA64 = 1<<0, /* Use 64Bit Data bus ext */ }; +/* PCI_OUR_REG_4 32 bit Our Register 4 (Yukon-ECU only) */ +enum pci_dev_reg_4 { + /* (Link Training & Status State Machine) */ + P_TIMER_VALUE_MSK = 0xffL<<16, /* Bit 23..16: Timer Value Mask */ + /* (Active State Power Management) */ + P_FORCE_ASPM_REQUEST = 1<<15, /* Force ASPM Request (A1 only) */ + P_ASPM_GPHY_LINK_DOWN = 1<<14, /* GPHY Link Down (A1 only) */ + P_ASPM_INT_FIFO_EMPTY = 1<<13, /* Internal FIFO Empty (A1 only) */ + P_ASPM_CLKRUN_REQUEST = 1<<12, /* CLKRUN Request (A1 only) */ + + P_ASPM_FORCE_CLKREQ_ENA = 1<<4, /* Force CLKREQ Enable (A1b only) */ + P_ASPM_CLKREQ_PAD_CTL = 1<<3, /* CLKREQ PAD Control (A1 only) */ + P_ASPM_A1_MODE_SELECT = 1<<2, /* A1 Mode Select (A1 only) */ + P_CLK_GATE_PEX_UNIT_ENA = 1<<1, /* Enable Gate PEX Unit Clock */ + P_CLK_GATE_ROOT_COR_ENA = 1<<0, /* Enable Gate Root Core Clock */ + P_ASPM_CONTROL_MSK = P_FORCE_ASPM_REQUEST | P_ASPM_GPHY_LINK_DOWN + | P_ASPM_CLKRUN_REQUEST | P_ASPM_INT_FIFO_EMPTY, +}; + #define PCI_STATUS_ERROR_BITS (PCI_STATUS_DETECTED_PARITY | \ PCI_STATUS_SIG_SYSTEM_ERROR | \ @@ -507,6 +534,16 @@ enum { }; #define Q_ADDR(reg, offs) (B8_Q_REGS + (reg) + (offs)) +/* Q_F 32 bit Flag Register */ +enum { + F_ALM_FULL = 1<<27, /* Rx FIFO: almost full */ + F_EMPTY = 1<<27, /* Tx FIFO: empty flag */ + F_FIFO_EOF = 1<<26, /* Tag (EOF Flag) bit in FIFO */ + F_WM_REACHED = 1<<25, /* Watermark reached */ + F_M_RX_RAM_DIS = 1<<24, /* MAC Rx RAM Read Port disable */ + F_FIFO_LEVEL = 0x1fL<<16, /* Bit 23..16: # of Qwords in FIFO */ + F_WATER_MARK = 0x0007ffL, /* Bit 10.. 0: Watermark */ +}; /* Queue Prefetch Unit Offsets, use Y2_QADDR() to address (Yukon-2 only)*/ enum { @@ -909,10 +946,12 @@ enum { PHY_BCOM_ID1_C0 = 0x6044, PHY_BCOM_ID1_C5 = 0x6047, - PHY_MARV_ID1_B0 = 0x0C23, /* Yukon (PHY 88E1011) */ + PHY_MARV_ID1_B0 = 0x0C23, /* Yukon (PHY 88E1011) */ PHY_MARV_ID1_B2 = 0x0C25, /* Yukon-Plus (PHY 88E1011) */ - PHY_MARV_ID1_C2 = 0x0CC2, /* Yukon-EC (PHY 88E1111) */ - PHY_MARV_ID1_Y2 = 0x0C91, /* Yukon-2 (PHY 88E1112) */ + PHY_MARV_ID1_C2 = 0x0CC2, /* Yukon-EC (PHY 88E1111) */ + PHY_MARV_ID1_Y2 = 0x0C91, /* Yukon-2 (PHY 88E1112) */ + PHY_MARV_ID1_FE = 0x0C83, /* Yukon-FE (PHY 88E3082 Rev.A1) */ + PHY_MARV_ID1_ECU= 0x0CB0, /* Yukon-ECU (PHY 88E1149 Rev.B2?) */ }; /* Advertisement register bits */ @@ -1837,8 +1876,9 @@ struct sky2_port { struct sky2_hw { void __iomem *regs; struct pci_dev *pdev; - u32 intr_mask; struct net_device *dev[2]; + spinlock_t hw_lock; + u32 intr_mask; int pm_cap; int msi; @@ -1912,4 +1952,25 @@ static inline void gma_set_addr(struct sky2_hw *hw, unsigned port, unsigned reg, gma_write16(hw, port, reg+4,(u16) addr[2] | ((u16) addr[3] << 8)); gma_write16(hw, port, reg+8,(u16) addr[4] | ((u16) addr[5] << 8)); } + +/* PCI config space access */ +static inline u32 sky2_pci_read32(const struct sky2_hw *hw, unsigned reg) +{ + return sky2_read32(hw, Y2_CFG_SPC + reg); +} + +static inline u16 sky2_pci_read16(const struct sky2_hw *hw, unsigned reg) +{ + return sky2_read16(hw, Y2_CFG_SPC + reg); +} + +static inline void sky2_pci_write32(struct sky2_hw *hw, unsigned reg, u32 val) +{ + sky2_write32(hw, Y2_CFG_SPC + reg, val); +} + +static inline void sky2_pci_write16(struct sky2_hw *hw, unsigned reg, u16 val) +{ + sky2_write16(hw, Y2_CFG_SPC + reg, val); +} #endif diff --git a/drivers/net/tlan.c b/drivers/net/tlan.c index c2506b5..12076f8 100644 --- a/drivers/net/tlan.c +++ b/drivers/net/tlan.c @@ -536,6 +536,7 @@ static int __devinit TLan_probe1(struct pci_dev *pdev, u16 device_id; int reg, rc = -ENODEV; +#ifdef CONFIG_PCI if (pdev) { rc = pci_enable_device(pdev); if (rc) @@ -547,6 +548,7 @@ static int __devinit TLan_probe1(struct pci_dev *pdev, goto err_out; } } +#endif /* CONFIG_PCI */ dev = alloc_etherdev(sizeof(TLanPrivateInfo)); if (dev == NULL) { diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index 930db39..9d98723 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -89,6 +89,11 @@ #define SD_MAX_RETRIES 5 #define SD_PASSTHROUGH_RETRIES 1 +/* + * Size of the initial data buffer for mode and read capacity data + */ +#define SD_BUF_SIZE 512 + static void scsi_disk_release(struct kref *kref); struct scsi_disk { @@ -1239,7 +1244,7 @@ sd_do_mode_sense(struct scsi_device *sdp, int dbd, int modepage, /* * read write protect setting, if possible - called only in sd_revalidate_disk() - * called with buffer of length 512 + * called with buffer of length SD_BUF_SIZE */ static void sd_read_write_protect_flag(struct scsi_disk *sdkp, char *diskname, @@ -1297,7 +1302,7 @@ sd_read_write_protect_flag(struct scsi_disk *sdkp, char *diskname, /* * sd_read_cache_type - called only from sd_revalidate_disk() - * called with buffer of length 512 + * called with buffer of length SD_BUF_SIZE */ static void sd_read_cache_type(struct scsi_disk *sdkp, char *diskname, @@ -1342,6 +1347,8 @@ sd_read_cache_type(struct scsi_disk *sdkp, char *diskname, /* Take headers and block descriptors into account */ len += data.header_length + data.block_descriptor_length; + if (len > SD_BUF_SIZE) + goto bad_sense; /* Get the data */ res = sd_do_mode_sense(sdp, dbd, modepage, buffer, len, &data, &sshdr); @@ -1354,6 +1361,12 @@ sd_read_cache_type(struct scsi_disk *sdkp, char *diskname, int ct = 0; int offset = data.header_length + data.block_descriptor_length; + if (offset >= SD_BUF_SIZE - 2) { + printk(KERN_ERR "%s: malformed MODE SENSE response", + diskname); + goto defaults; + } + if ((buffer[offset] & 0x3f) != modepage) { printk(KERN_ERR "%s: got wrong page\n", diskname); goto defaults; @@ -1398,6 +1411,7 @@ defaults: diskname); sdkp->WCE = 0; sdkp->RCD = 0; + sdkp->DPOFUA = 0; } /** @@ -1421,7 +1435,7 @@ static int sd_revalidate_disk(struct gendisk *disk) if (!scsi_device_online(sdp)) goto out; - buffer = kmalloc(512, GFP_KERNEL | __GFP_DMA); + buffer = kmalloc(SD_BUF_SIZE, GFP_KERNEL | __GFP_DMA); if (!buffer) { printk(KERN_WARNING "(sd_revalidate_disk:) Memory allocation " "failure.\n"); diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c index 244e8ff..7aca22c 100644 --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c @@ -2326,6 +2326,12 @@ static struct uart_driver serial8250_reg = { .cons = SERIAL8250_CONSOLE, }; +/* + * early_serial_setup - early registration for 8250 ports + * + * Setup an 8250 port structure prior to console initialisation. Use + * after console initialisation will cause undefined behaviour. + */ int __init early_serial_setup(struct uart_port *port) { if (port->line >= ARRAY_SIZE(serial8250_ports)) diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index e64ed16..f5079c7 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -520,7 +520,7 @@ config FB_GBE config FB_GBE_MEM int "Video memory size in MB" depends on FB_GBE - default 8 + default 4 help This is the amount of memory reserved for the framebuffer, which can be any value between 1MB and 8MB. diff --git a/drivers/video/asiliantfb.c b/drivers/video/asiliantfb.c index 69f7554..c924d81 100644 --- a/drivers/video/asiliantfb.c +++ b/drivers/video/asiliantfb.c @@ -322,32 +322,29 @@ static int asiliantfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, writeb(green, mmio_base + 0x791); writeb(blue, mmio_base + 0x791); - switch(p->var.bits_per_pixel) { - case 15: - if (regno < 16) { + if (regno < 16) { + switch(p->var.red.offset) { + case 10: /* RGB 555 */ ((u32 *)(p->pseudo_palette))[regno] = ((red & 0xf8) << 7) | ((green & 0xf8) << 2) | ((blue & 0xf8) >> 3); - } - break; - case 16: - if (regno < 16) { + break; + case 11: /* RGB 565 */ ((u32 *)(p->pseudo_palette))[regno] = ((red & 0xf8) << 8) | ((green & 0xfc) << 3) | ((blue & 0xf8) >> 3); - } - break; - case 24: - if (regno < 24) { + break; + case 16: /* RGB 888 */ ((u32 *)(p->pseudo_palette))[regno] = (red << 16) | (green << 8) | (blue); + break; } - break; } + return 0; } diff --git a/drivers/video/au1100fb.c b/drivers/video/au1100fb.c index 2406899..3d04b2d 100644 --- a/drivers/video/au1100fb.c +++ b/drivers/video/au1100fb.c @@ -49,6 +49,7 @@ #include <linux/interrupt.h> #include <linux/ctype.h> #include <linux/dma-mapping.h> +#include <linux/platform_device.h> #include <asm/mach-au1x00/au1000.h> @@ -406,7 +407,7 @@ int au1100fb_fb_mmap(struct fb_info *fbi, struct vm_area_struct *vma) vma->vm_flags |= VM_IO; - if (io_remap_page_range(vma, vma->vm_start, off, + if (io_remap_pfn_range(vma, vma->vm_start, off >> PAGE_SHIFT, vma->vm_end - vma->vm_start, vma->vm_page_prot)) { return -EAGAIN; diff --git a/drivers/video/console/vgacon.c b/drivers/video/console/vgacon.c index 12d9329..5a86978 100644 --- a/drivers/video/console/vgacon.c +++ b/drivers/video/console/vgacon.c @@ -509,57 +509,60 @@ static int vgacon_doresize(struct vc_data *c, { unsigned long flags; unsigned int scanlines = height * c->vc_font.height; - u8 scanlines_lo, r7, vsync_end, mode, max_scan; + u8 scanlines_lo = 0, r7 = 0, vsync_end = 0, mode, max_scan; spin_lock_irqsave(&vga_lock, flags); - outb_p(VGA_CRTC_MAX_SCAN, vga_video_port_reg); - max_scan = inb_p(vga_video_port_val); - - if (max_scan & 0x80) - scanlines <<= 1; - vgacon_xres = width * VGA_FONTWIDTH; vgacon_yres = height * c->vc_font.height; - outb_p(VGA_CRTC_MODE, vga_video_port_reg); - mode = inb_p(vga_video_port_val); + if (vga_video_type >= VIDEO_TYPE_VGAC) { + outb_p(VGA_CRTC_MAX_SCAN, vga_video_port_reg); + max_scan = inb_p(vga_video_port_val); - if (mode & 0x04) - scanlines >>= 1; + if (max_scan & 0x80) + scanlines <<= 1; - scanlines -= 1; - scanlines_lo = scanlines & 0xff; + outb_p(VGA_CRTC_MODE, vga_video_port_reg); + mode = inb_p(vga_video_port_val); - outb_p(VGA_CRTC_OVERFLOW, vga_video_port_reg); - r7 = inb_p(vga_video_port_val) & ~0x42; + if (mode & 0x04) + scanlines >>= 1; - if (scanlines & 0x100) - r7 |= 0x02; - if (scanlines & 0x200) - r7 |= 0x40; + scanlines -= 1; + scanlines_lo = scanlines & 0xff; - /* deprotect registers */ - outb_p(VGA_CRTC_V_SYNC_END, vga_video_port_reg); - vsync_end = inb_p(vga_video_port_val); - outb_p(VGA_CRTC_V_SYNC_END, vga_video_port_reg); - outb_p(vsync_end & ~0x80, vga_video_port_val); + outb_p(VGA_CRTC_OVERFLOW, vga_video_port_reg); + r7 = inb_p(vga_video_port_val) & ~0x42; + + if (scanlines & 0x100) + r7 |= 0x02; + if (scanlines & 0x200) + r7 |= 0x40; + + /* deprotect registers */ + outb_p(VGA_CRTC_V_SYNC_END, vga_video_port_reg); + vsync_end = inb_p(vga_video_port_val); + outb_p(VGA_CRTC_V_SYNC_END, vga_video_port_reg); + outb_p(vsync_end & ~0x80, vga_video_port_val); + } outb_p(VGA_CRTC_H_DISP, vga_video_port_reg); outb_p(width - 1, vga_video_port_val); outb_p(VGA_CRTC_OFFSET, vga_video_port_reg); outb_p(width >> 1, vga_video_port_val); - outb_p(VGA_CRTC_V_DISP_END, vga_video_port_reg); - outb_p(scanlines_lo, vga_video_port_val); - outb_p(VGA_CRTC_OVERFLOW, vga_video_port_reg); - outb_p(r7,vga_video_port_val); + if (vga_video_type >= VIDEO_TYPE_VGAC) { + outb_p(VGA_CRTC_V_DISP_END, vga_video_port_reg); + outb_p(scanlines_lo, vga_video_port_val); + outb_p(VGA_CRTC_OVERFLOW, vga_video_port_reg); + outb_p(r7,vga_video_port_val); - /* reprotect registers */ - outb_p(VGA_CRTC_V_SYNC_END, vga_video_port_reg); - outb_p(vsync_end, vga_video_port_val); + /* reprotect registers */ + outb_p(VGA_CRTC_V_SYNC_END, vga_video_port_reg); + outb_p(vsync_end, vga_video_port_val); + } spin_unlock_irqrestore(&vga_lock, flags); - return 0; } diff --git a/drivers/video/gbefb.c b/drivers/video/gbefb.c index c9a7cdf..5e25b98 100644 --- a/drivers/video/gbefb.c +++ b/drivers/video/gbefb.c @@ -656,12 +656,15 @@ static int gbefb_set_par(struct fb_info *info) switch (bytesPerPixel) { case 1: SET_GBE_FIELD(WID, TYP, val, GBE_CMODE_I8); + info->fix.visual = FB_VISUAL_PSEUDOCOLOR; break; case 2: SET_GBE_FIELD(WID, TYP, val, GBE_CMODE_ARGB5); + info->fix.visual = FB_VISUAL_TRUECOLOR; break; case 4: SET_GBE_FIELD(WID, TYP, val, GBE_CMODE_RGB8); + info->fix.visual = FB_VISUAL_TRUECOLOR; break; } SET_GBE_FIELD(WID, BUF, val, GBE_BMODE_BOTH); diff --git a/fs/binfmt_elf.c b/fs/binfmt_elf.c index 1b117a4..c2eac2a 100644 --- a/fs/binfmt_elf.c +++ b/fs/binfmt_elf.c @@ -938,6 +938,11 @@ static int load_elf_binary(struct linux_binprm * bprm, struct pt_regs * regs) kfree(elf_interpreter); } else { elf_entry = loc->elf_ex.e_entry; + if (BAD_ADDR(elf_entry)) { + send_sig(SIGSEGV, current, 0); + retval = -ENOEXEC; /* Nobody gets to see this, but.. */ + goto out_free_dentry; + } } kfree(elf_phdata); diff --git a/fs/compat_ioctl.c b/fs/compat_ioctl.c index 057e602..537ac70 100644 --- a/fs/compat_ioctl.c +++ b/fs/compat_ioctl.c @@ -2531,18 +2531,9 @@ static int rtc_ioctl(unsigned fd, unsigned cmd, unsigned long arg) val32 = kval; return put_user(val32, (unsigned int __user *)arg); case RTC_IRQP_SET32: + return sys_ioctl(fd, RTC_IRQP_SET, arg); case RTC_EPOCH_SET32: - ret = get_user(val32, (unsigned int __user *)arg); - if (ret) - return ret; - kval = val32; - - set_fs(KERNEL_DS); - ret = sys_ioctl(fd, (cmd == RTC_IRQP_SET32) ? - RTC_IRQP_SET : RTC_EPOCH_SET, - (unsigned long)&kval); - set_fs(oldfs); - return ret; + return sys_ioctl(fd, RTC_EPOCH_SET, arg); default: /* unreached */ return -ENOIOCTLCMD; @@ -2224,13 +2224,17 @@ int vfs_link(struct dentry *old_dentry, struct inode *dir, struct dentry *new_de * and other special files. --ADM */ asmlinkage long sys_linkat(int olddfd, const char __user *oldname, - int newdfd, const char __user *newname) + int newdfd, const char __user *newname, + int flags) { struct dentry *new_dentry; struct nameidata nd, old_nd; int error; char * to; + if (flags != 0) + return -EINVAL; + to = getname(newname); if (IS_ERR(to)) return PTR_ERR(to); @@ -2263,7 +2267,7 @@ exit: asmlinkage long sys_link(const char __user *oldname, const char __user *newname) { - return sys_linkat(AT_FDCWD, oldname, AT_FDCWD, newname); + return sys_linkat(AT_FDCWD, oldname, AT_FDCWD, newname, 0); } /* diff --git a/fs/ntfs/ChangeLog b/fs/ntfs/ChangeLog index 02f4409..9d8ffa8 100644 --- a/fs/ntfs/ChangeLog +++ b/fs/ntfs/ChangeLog @@ -1,9 +1,9 @@ ToDo/Notes: - Find and fix bugs. - The only places in the kernel where a file is resized are - ntfs_file_write*() and ntfs_truncate() for both of which i_sem is + ntfs_file_write*() and ntfs_truncate() for both of which i_mutex is held. Just have to be careful in read-/writepage and other helpers - not running under i_sem that we play nice... Also need to be careful + not running under i_mutex that we play nice. Also need to be careful with initialized_size extension in ntfs_file_write*() and writepage. UPDATE: The only things that need to be checked are the compressed write and the other attribute resize/write cases like index @@ -19,6 +19,24 @@ ToDo/Notes: - Enable the code for setting the NT4 compatibility flag when we start making NTFS 1.2 specific modifications. +2.1.26 - Minor bug fixes and updates. + + - Fix a potential overflow in file.c where a cast to s64 was missing in + a left shift of a page index. + - The struct inode has had its i_sem semaphore changed to a mutex named + i_mutex. + - We have struct kmem_cache now so use it instead of the typedef + kmem_cache_t. (Pekka Enberg) + - Implement support for sector sizes above 512 bytes (up to the maximum + supported by NTFS which is 4096 bytes). + - Do more detailed reporting of why we cannot mount read-write by + special casing the VOLUME_MODIFIED_BY_CHKDSK flag. + - Miscellaneous updates to layout.h. + - Cope with attribute list attribute having invalid flags. Windows + copes with this and even chkdsk does not detect or fix this so we + have to cope with it, too. Thanks to Pawel Kot for reporting the + problem. + 2.1.25 - (Almost) fully implement write(2) and truncate(2). - Change ntfs_map_runlist_nolock(), ntfs_attr_find_vcn_nolock() and @@ -373,7 +391,7 @@ ToDo/Notes: single one of them had an mst error. (Thanks to Ken MacFerrin for the bug report.) - Fix error handling in fs/ntfs/quota.c::ntfs_mark_quotas_out_of_date() - where we failed to release i_sem on the $Quota/$Q attribute inode. + where we failed to release i_mutex on the $Quota/$Q attribute inode. - Fix bug in handling of bad inodes in fs/ntfs/namei.c::ntfs_lookup(). - Add mapping of unmapped buffers to all remaining code paths, i.e. fs/ntfs/aops.c::ntfs_write_mst_block(), mft.c::ntfs_sync_mft_mirror(), @@ -874,7 +892,7 @@ ToDo/Notes: clusters. (Philipp Thomas) - attrib.c::load_attribute_list(): Fix bug when initialized_size is a multiple of the block_size but not the cluster size. (Szabolcs - Szakacsits <szaka@sienet.hu>) + Szakacsits) 2.1.2 - Important bug fixes aleviating the hangs in statfs. @@ -884,7 +902,7 @@ ToDo/Notes: - Add handling for initialized_size != data_size in compressed files. - Reduce function local stack usage from 0x3d4 bytes to just noise in - fs/ntfs/upcase.c. (Randy Dunlap <rdunlap@xenotime.net>) + fs/ntfs/upcase.c. (Randy Dunlap) - Remove compiler warnings for newer gcc. - Pages are no longer kmapped by mm/filemap.c::generic_file_write() around calls to ->{prepare,commit}_write. Adapt NTFS appropriately @@ -1201,11 +1219,11 @@ ToDo/Notes: the kernel. We probably want a kernel generic init_address_space() function... - Drop BKL from ntfs_readdir() after consultation with Al Viro. The - only caller of ->readdir() is vfs_readdir() which holds i_sem during - the call, and i_sem is sufficient protection against changes in the - directory inode (including ->i_size). + only caller of ->readdir() is vfs_readdir() which holds i_mutex + during the call, and i_mutex is sufficient protection against changes + in the directory inode (including ->i_size). - Use generic_file_llseek() for directories (as opposed to - default_llseek()) as this downs i_sem instead of the BKL which is + default_llseek()) as this downs i_mutex instead of the BKL which is what we now need for exclusion against ->f_pos changes considering we no longer take the BKL in ntfs_readdir(). diff --git a/fs/ntfs/Makefile b/fs/ntfs/Makefile index d0d45d1..d95fac7 100644 --- a/fs/ntfs/Makefile +++ b/fs/ntfs/Makefile @@ -6,7 +6,7 @@ ntfs-objs := aops.o attrib.o collate.o compress.o debug.o dir.o file.o \ index.o inode.o mft.o mst.o namei.o runlist.o super.o sysctl.o \ unistr.o upcase.o -EXTRA_CFLAGS = -DNTFS_VERSION=\"2.1.25\" +EXTRA_CFLAGS = -DNTFS_VERSION=\"2.1.26\" ifeq ($(CONFIG_NTFS_DEBUG),y) EXTRA_CFLAGS += -DDEBUG diff --git a/fs/ntfs/aops.c b/fs/ntfs/aops.c index 1c0a431..7e361da 100644 --- a/fs/ntfs/aops.c +++ b/fs/ntfs/aops.c @@ -2,7 +2,7 @@ * aops.c - NTFS kernel address space operations and page cache handling. * Part of the Linux-NTFS project. * - * Copyright (c) 2001-2005 Anton Altaparmakov + * Copyright (c) 2001-2006 Anton Altaparmakov * Copyright (c) 2002 Richard Russon * * This program/include file is free software; you can redistribute it and/or @@ -200,8 +200,8 @@ static int ntfs_read_block(struct page *page) /* $MFT/$DATA must have its complete runlist in memory at all times. */ BUG_ON(!ni->runlist.rl && !ni->mft_no && !NInoAttr(ni)); - blocksize_bits = VFS_I(ni)->i_blkbits; - blocksize = 1 << blocksize_bits; + blocksize = vol->sb->s_blocksize; + blocksize_bits = vol->sb->s_blocksize_bits; if (!page_has_buffers(page)) { create_empty_buffers(page, blocksize, 0); @@ -569,10 +569,8 @@ static int ntfs_write_block(struct page *page, struct writeback_control *wbc) BUG_ON(!NInoNonResident(ni)); BUG_ON(NInoMstProtected(ni)); - - blocksize_bits = vi->i_blkbits; - blocksize = 1 << blocksize_bits; - + blocksize = vol->sb->s_blocksize; + blocksize_bits = vol->sb->s_blocksize_bits; if (!page_has_buffers(page)) { BUG_ON(!PageUptodate(page)); create_empty_buffers(page, blocksize, @@ -949,8 +947,8 @@ static int ntfs_write_mst_block(struct page *page, */ BUG_ON(!(is_mft || S_ISDIR(vi->i_mode) || (NInoAttr(ni) && ni->type == AT_INDEX_ALLOCATION))); - bh_size_bits = vi->i_blkbits; - bh_size = 1 << bh_size_bits; + bh_size = vol->sb->s_blocksize; + bh_size_bits = vol->sb->s_blocksize_bits; max_bhs = PAGE_CACHE_SIZE / bh_size; BUG_ON(!max_bhs); BUG_ON(max_bhs > MAX_BUF_PER_PAGE); @@ -1596,7 +1594,7 @@ void mark_ntfs_record_dirty(struct page *page, const unsigned int ofs) { BUG_ON(!PageUptodate(page)); end = ofs + ni->itype.index.block_size; - bh_size = 1 << VFS_I(ni)->i_blkbits; + bh_size = VFS_I(ni)->i_sb->s_blocksize; spin_lock(&mapping->private_lock); if (unlikely(!page_has_buffers(page))) { spin_unlock(&mapping->private_lock); diff --git a/fs/ntfs/file.c b/fs/ntfs/file.c index fb413d3..5027d3d 100644 --- a/fs/ntfs/file.c +++ b/fs/ntfs/file.c @@ -1,7 +1,7 @@ /* * file.c - NTFS kernel file operations. Part of the Linux-NTFS project. * - * Copyright (c) 2001-2005 Anton Altaparmakov + * Copyright (c) 2001-2006 Anton Altaparmakov * * This program/include file is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as published @@ -248,7 +248,7 @@ do_non_resident_extend: * enough to make ntfs_writepage() work. */ write_lock_irqsave(&ni->size_lock, flags); - ni->initialized_size = (index + 1) << PAGE_CACHE_SHIFT; + ni->initialized_size = (s64)(index + 1) << PAGE_CACHE_SHIFT; if (ni->initialized_size > new_init_size) ni->initialized_size = new_init_size; write_unlock_irqrestore(&ni->size_lock, flags); @@ -529,8 +529,8 @@ static int ntfs_prepare_pages_for_non_resident_write(struct page **pages, "index 0x%lx, nr_pages 0x%x, pos 0x%llx, bytes 0x%zx.", vi->i_ino, ni->type, pages[0]->index, nr_pages, (long long)pos, bytes); - blocksize_bits = vi->i_blkbits; - blocksize = 1 << blocksize_bits; + blocksize = vol->sb->s_blocksize; + blocksize_bits = vol->sb->s_blocksize_bits; u = 0; do { struct page *page = pages[u]; @@ -1525,7 +1525,7 @@ static inline int ntfs_commit_pages_after_non_resident_write( vi = pages[0]->mapping->host; ni = NTFS_I(vi); - blocksize = 1 << vi->i_blkbits; + blocksize = vi->i_sb->s_blocksize; end = pos + bytes; u = 0; do { diff --git a/fs/ntfs/inode.c b/fs/ntfs/inode.c index ea1bd3f..55263b7 100644 --- a/fs/ntfs/inode.c +++ b/fs/ntfs/inode.c @@ -677,13 +677,28 @@ static int ntfs_read_locked_inode(struct inode *vi) ntfs_debug("Attribute list found in inode 0x%lx.", vi->i_ino); NInoSetAttrList(ni); a = ctx->attr; - if (a->flags & ATTR_IS_ENCRYPTED || - a->flags & ATTR_COMPRESSION_MASK || - a->flags & ATTR_IS_SPARSE) { + if (a->flags & ATTR_COMPRESSION_MASK) { ntfs_error(vi->i_sb, "Attribute list attribute is " - "compressed/encrypted/sparse."); + "compressed."); goto unm_err_out; } + if (a->flags & ATTR_IS_ENCRYPTED || + a->flags & ATTR_IS_SPARSE) { + if (a->non_resident) { + ntfs_error(vi->i_sb, "Non-resident attribute " + "list attribute is encrypted/" + "sparse."); + goto unm_err_out; + } + ntfs_warning(vi->i_sb, "Resident attribute list " + "attribute in inode 0x%lx is marked " + "encrypted/sparse which is not true. " + "However, Windows allows this and " + "chkdsk does not detect or correct it " + "so we will just ignore the invalid " + "flags and pretend they are not set.", + vi->i_ino); + } /* Now allocate memory for the attribute list. */ ni->attr_list_size = (u32)ntfs_attr_size(a); ni->attr_list = ntfs_malloc_nofs(ni->attr_list_size); @@ -1809,19 +1824,33 @@ int ntfs_read_inode_mount(struct inode *vi) } else /* if (!err) */ { ATTR_LIST_ENTRY *al_entry, *next_al_entry; u8 *al_end; + static const char *es = " Not allowed. $MFT is corrupt. " + "You should run chkdsk."; ntfs_debug("Attribute list attribute found in $MFT."); NInoSetAttrList(ni); a = ctx->attr; - if (a->flags & ATTR_IS_ENCRYPTED || - a->flags & ATTR_COMPRESSION_MASK || - a->flags & ATTR_IS_SPARSE) { + if (a->flags & ATTR_COMPRESSION_MASK) { ntfs_error(sb, "Attribute list attribute is " - "compressed/encrypted/sparse. Not " - "allowed. $MFT is corrupt. You should " - "run chkdsk."); + "compressed.%s", es); goto put_err_out; } + if (a->flags & ATTR_IS_ENCRYPTED || + a->flags & ATTR_IS_SPARSE) { + if (a->non_resident) { + ntfs_error(sb, "Non-resident attribute list " + "attribute is encrypted/" + "sparse.%s", es); + goto put_err_out; + } + ntfs_warning(sb, "Resident attribute list attribute " + "in $MFT system file is marked " + "encrypted/sparse which is not true. " + "However, Windows allows this and " + "chkdsk does not detect or correct it " + "so we will just ignore the invalid " + "flags and pretend they are not set."); + } /* Now allocate memory for the attribute list. */ ni->attr_list_size = (u32)ntfs_attr_size(a); ni->attr_list = ntfs_malloc_nofs(ni->attr_list_size); diff --git a/fs/ntfs/layout.h b/fs/ntfs/layout.h index f5678d5..bb408d4 100644 --- a/fs/ntfs/layout.h +++ b/fs/ntfs/layout.h @@ -838,15 +838,19 @@ enum { F_A_DEVICE, F_A_DIRECTORY, F_A_SPARSE_FILE, F_A_REPARSE_POINT, F_A_COMPRESSED, and F_A_ENCRYPTED and preserves the rest. This mask is used to to obtain all flags that are valid for setting. */ - /* - * The following flags are only present in the FILE_NAME attribute (in + * The following flag is only present in the FILE_NAME attribute (in * the field file_attributes). */ FILE_ATTR_DUP_FILE_NAME_INDEX_PRESENT = const_cpu_to_le32(0x10000000), /* Note, this is a copy of the corresponding bit from the mft record, telling us whether this is a directory or not, i.e. whether it has an index root attribute or not. */ + /* + * The following flag is present both in the STANDARD_INFORMATION + * attribute and in the FILE_NAME attribute (in the field + * file_attributes). + */ FILE_ATTR_DUP_VIEW_INDEX_PRESENT = const_cpu_to_le32(0x20000000), /* Note, this is a copy of the corresponding bit from the mft record, telling us whether this file has a view index present (eg. object id @@ -1071,9 +1075,15 @@ typedef struct { modified. */ /* 20*/ sle64 last_access_time; /* Time this mft record was last accessed. */ -/* 28*/ sle64 allocated_size; /* Byte size of allocated space for the - data attribute. NOTE: Is a multiple - of the cluster size. */ +/* 28*/ sle64 allocated_size; /* Byte size of on-disk allocated space + for the data attribute. So for + normal $DATA, this is the + allocated_size from the unnamed + $DATA attribute and for compressed + and/or sparse $DATA, this is the + compressed_size from the unnamed + $DATA attribute. NOTE: This is a + multiple of the cluster size. */ /* 30*/ sle64 data_size; /* Byte size of actual data in data attribute. */ /* 38*/ FILE_ATTR_FLAGS file_attributes; /* Flags describing the file. */ @@ -1904,12 +1914,13 @@ enum { VOLUME_DELETE_USN_UNDERWAY = const_cpu_to_le16(0x0010), VOLUME_REPAIR_OBJECT_ID = const_cpu_to_le16(0x0020), + VOLUME_CHKDSK_UNDERWAY = const_cpu_to_le16(0x4000), VOLUME_MODIFIED_BY_CHKDSK = const_cpu_to_le16(0x8000), - VOLUME_FLAGS_MASK = const_cpu_to_le16(0x803f), + VOLUME_FLAGS_MASK = const_cpu_to_le16(0xc03f), /* To make our life easier when checking if we must mount read-only. */ - VOLUME_MUST_MOUNT_RO_MASK = const_cpu_to_le16(0x8027), + VOLUME_MUST_MOUNT_RO_MASK = const_cpu_to_le16(0xc027), } __attribute__ ((__packed__)); typedef le16 VOLUME_FLAGS; diff --git a/fs/ntfs/mft.c b/fs/ntfs/mft.c index 0c65cbb..6499aaf 100644 --- a/fs/ntfs/mft.c +++ b/fs/ntfs/mft.c @@ -1,7 +1,7 @@ /** * mft.c - NTFS kernel mft record operations. Part of the Linux-NTFS project. * - * Copyright (c) 2001-2005 Anton Altaparmakov + * Copyright (c) 2001-2006 Anton Altaparmakov * Copyright (c) 2002 Richard Russon * * This program/include file is free software; you can redistribute it and/or @@ -473,7 +473,7 @@ int ntfs_sync_mft_mirror(ntfs_volume *vol, const unsigned long mft_no, runlist_element *rl; unsigned int block_start, block_end, m_start, m_end, page_ofs; int i_bhs, nr_bhs, err = 0; - unsigned char blocksize_bits = vol->mftmirr_ino->i_blkbits; + unsigned char blocksize_bits = vol->sb->s_blocksize_bits; ntfs_debug("Entering for inode 0x%lx.", mft_no); BUG_ON(!max_bhs); @@ -672,8 +672,8 @@ int write_mft_record_nolock(ntfs_inode *ni, MFT_RECORD *m, int sync) { ntfs_volume *vol = ni->vol; struct page *page = ni->page; - unsigned char blocksize_bits = vol->mft_ino->i_blkbits; - unsigned int blocksize = 1 << blocksize_bits; + unsigned int blocksize = vol->sb->s_blocksize; + unsigned char blocksize_bits = vol->sb->s_blocksize_bits; int max_bhs = vol->mft_record_size / blocksize; struct buffer_head *bhs[max_bhs]; struct buffer_head *bh, *head; diff --git a/fs/ntfs/ntfs.h b/fs/ntfs/ntfs.h index 446b501..653d2a5 100644 --- a/fs/ntfs/ntfs.h +++ b/fs/ntfs/ntfs.h @@ -50,11 +50,11 @@ typedef enum { /* Global variables. */ /* Slab caches (from super.c). */ -extern kmem_cache_t *ntfs_name_cache; -extern kmem_cache_t *ntfs_inode_cache; -extern kmem_cache_t *ntfs_big_inode_cache; -extern kmem_cache_t *ntfs_attr_ctx_cache; -extern kmem_cache_t *ntfs_index_ctx_cache; +extern struct kmem_cache *ntfs_name_cache; +extern struct kmem_cache *ntfs_inode_cache; +extern struct kmem_cache *ntfs_big_inode_cache; +extern struct kmem_cache *ntfs_attr_ctx_cache; +extern struct kmem_cache *ntfs_index_ctx_cache; /* The various operations structs defined throughout the driver files. */ extern struct address_space_operations ntfs_aops; diff --git a/fs/ntfs/super.c b/fs/ntfs/super.c index c3a3f1a..368a8ec 100644 --- a/fs/ntfs/super.c +++ b/fs/ntfs/super.c @@ -1,7 +1,7 @@ /* * super.c - NTFS kernel super block handling. Part of the Linux-NTFS project. * - * Copyright (c) 2001-2005 Anton Altaparmakov + * Copyright (c) 2001-2006 Anton Altaparmakov * Copyright (c) 2001,2002 Richard Russon * * This program/include file is free software; you can redistribute it and/or @@ -22,6 +22,7 @@ #include <linux/stddef.h> #include <linux/init.h> +#include <linux/slab.h> #include <linux/string.h> #include <linux/spinlock.h> #include <linux/blkdev.h> /* For bdev_hardsect_size(). */ @@ -471,9 +472,16 @@ static int ntfs_remount(struct super_block *sb, int *flags, char *opt) ntfs_error(sb, "Volume is dirty and read-only%s", es); return -EROFS; } + if (vol->vol_flags & VOLUME_MODIFIED_BY_CHKDSK) { + ntfs_error(sb, "Volume has been modified by chkdsk " + "and is read-only%s", es); + return -EROFS; + } if (vol->vol_flags & VOLUME_MUST_MOUNT_RO_MASK) { - ntfs_error(sb, "Volume has unsupported flags set and " - "is read-only%s", es); + ntfs_error(sb, "Volume has unsupported flags set " + "(0x%x) and is read-only%s", + (unsigned)le16_to_cpu(vol->vol_flags), + es); return -EROFS; } if (ntfs_set_volume_flags(vol, VOLUME_IS_DIRTY)) { @@ -641,7 +649,7 @@ static struct buffer_head *read_ntfs_boot_sector(struct super_block *sb, { const char *read_err_str = "Unable to read %s boot sector."; struct buffer_head *bh_primary, *bh_backup; - long nr_blocks = NTFS_SB(sb)->nr_blocks; + sector_t nr_blocks = NTFS_SB(sb)->nr_blocks; /* Try to read primary boot sector. */ if ((bh_primary = sb_bread(sb, 0))) { @@ -688,13 +696,18 @@ hotfix_primary_boot_sector: /* * If we managed to read sector zero and the volume is not * read-only, copy the found, valid backup boot sector to the - * primary boot sector. + * primary boot sector. Note we only copy the actual boot + * sector structure, not the actual whole device sector as that + * may be bigger and would potentially damage the $Boot system + * file (FIXME: Would be nice to know if the backup boot sector + * on a large sector device contains the whole boot loader or + * just the first 512 bytes). */ if (!(sb->s_flags & MS_RDONLY)) { ntfs_warning(sb, "Hot-fix: Recovering invalid primary " "boot sector from backup copy."); memcpy(bh_primary->b_data, bh_backup->b_data, - sb->s_blocksize); + NTFS_BLOCK_SIZE); mark_buffer_dirty(bh_primary); sync_dirty_buffer(bh_primary); if (buffer_uptodate(bh_primary)) { @@ -733,9 +746,13 @@ static BOOL parse_ntfs_boot_sector(ntfs_volume *vol, const NTFS_BOOT_SECTOR *b) vol->sector_size); ntfs_debug("vol->sector_size_bits = %i (0x%x)", vol->sector_size_bits, vol->sector_size_bits); - if (vol->sector_size != vol->sb->s_blocksize) - ntfs_warning(vol->sb, "The boot sector indicates a sector size " - "different from the device sector size."); + if (vol->sector_size < vol->sb->s_blocksize) { + ntfs_error(vol->sb, "Sector size (%i) is smaller than the " + "device block size (%lu). This is not " + "supported. Sorry.", vol->sector_size, + vol->sb->s_blocksize); + return FALSE; + } ntfs_debug("sectors_per_cluster = 0x%x", b->bpb.sectors_per_cluster); sectors_per_cluster_bits = ffs(b->bpb.sectors_per_cluster) - 1; ntfs_debug("sectors_per_cluster_bits = 0x%x", @@ -748,16 +765,11 @@ static BOOL parse_ntfs_boot_sector(ntfs_volume *vol, const NTFS_BOOT_SECTOR *b) ntfs_debug("vol->cluster_size = %i (0x%x)", vol->cluster_size, vol->cluster_size); ntfs_debug("vol->cluster_size_mask = 0x%x", vol->cluster_size_mask); - ntfs_debug("vol->cluster_size_bits = %i (0x%x)", - vol->cluster_size_bits, vol->cluster_size_bits); - if (vol->sector_size > vol->cluster_size) { - ntfs_error(vol->sb, "Sector sizes above the cluster size are " - "not supported. Sorry."); - return FALSE; - } - if (vol->sb->s_blocksize > vol->cluster_size) { - ntfs_error(vol->sb, "Cluster sizes smaller than the device " - "sector size are not supported. Sorry."); + ntfs_debug("vol->cluster_size_bits = %i", vol->cluster_size_bits); + if (vol->cluster_size < vol->sector_size) { + ntfs_error(vol->sb, "Cluster size (%i) is smaller than the " + "sector size (%i). This is not supported. " + "Sorry.", vol->cluster_size, vol->sector_size); return FALSE; } clusters_per_mft_record = b->clusters_per_mft_record; @@ -786,11 +798,18 @@ static BOOL parse_ntfs_boot_sector(ntfs_volume *vol, const NTFS_BOOT_SECTOR *b) * we store $MFT/$DATA, the table of mft records in the page cache. */ if (vol->mft_record_size > PAGE_CACHE_SIZE) { - ntfs_error(vol->sb, "Mft record size %i (0x%x) exceeds the " - "page cache size on your system %lu (0x%lx). " + ntfs_error(vol->sb, "Mft record size (%i) exceeds the " + "PAGE_CACHE_SIZE on your system (%lu). " "This is not supported. Sorry.", - vol->mft_record_size, vol->mft_record_size, - PAGE_CACHE_SIZE, PAGE_CACHE_SIZE); + vol->mft_record_size, PAGE_CACHE_SIZE); + return FALSE; + } + /* We cannot support mft record sizes below the sector size. */ + if (vol->mft_record_size < vol->sector_size) { + ntfs_error(vol->sb, "Mft record size (%i) is smaller than the " + "sector size (%i). This is not supported. " + "Sorry.", vol->mft_record_size, + vol->sector_size); return FALSE; } clusters_per_index_record = b->clusters_per_index_record; @@ -816,6 +835,14 @@ static BOOL parse_ntfs_boot_sector(ntfs_volume *vol, const NTFS_BOOT_SECTOR *b) ntfs_debug("vol->index_record_size_bits = %i (0x%x)", vol->index_record_size_bits, vol->index_record_size_bits); + /* We cannot support index record sizes below the sector size. */ + if (vol->index_record_size < vol->sector_size) { + ntfs_error(vol->sb, "Index record size (%i) is smaller than " + "the sector size (%i). This is not " + "supported. Sorry.", vol->index_record_size, + vol->sector_size); + return FALSE; + } /* * Get the size of the volume in clusters and check for 64-bit-ness. * Windows currently only uses 32 bits to save the clusters so we do @@ -845,15 +872,18 @@ static BOOL parse_ntfs_boot_sector(ntfs_volume *vol, const NTFS_BOOT_SECTOR *b) } ll = sle64_to_cpu(b->mft_lcn); if (ll >= vol->nr_clusters) { - ntfs_error(vol->sb, "MFT LCN is beyond end of volume. Weird."); + ntfs_error(vol->sb, "MFT LCN (%lli, 0x%llx) is beyond end of " + "volume. Weird.", (unsigned long long)ll, + (unsigned long long)ll); return FALSE; } vol->mft_lcn = ll; ntfs_debug("vol->mft_lcn = 0x%llx", (long long)vol->mft_lcn); ll = sle64_to_cpu(b->mftmirr_lcn); if (ll >= vol->nr_clusters) { - ntfs_error(vol->sb, "MFTMirr LCN is beyond end of volume. " - "Weird."); + ntfs_error(vol->sb, "MFTMirr LCN (%lli, 0x%llx) is beyond end " + "of volume. Weird.", (unsigned long long)ll, + (unsigned long long)ll); return FALSE; } vol->mftmirr_lcn = ll; @@ -1822,11 +1852,24 @@ get_ctx_vol_failed: /* Make sure that no unsupported volume flags are set. */ if (vol->vol_flags & VOLUME_MUST_MOUNT_RO_MASK) { static const char *es1a = "Volume is dirty"; - static const char *es1b = "Volume has unsupported flags set"; - static const char *es2 = ". Run chkdsk and mount in Windows."; - const char *es1; - - es1 = vol->vol_flags & VOLUME_IS_DIRTY ? es1a : es1b; + static const char *es1b = "Volume has been modified by chkdsk"; + static const char *es1c = "Volume has unsupported flags set"; + static const char *es2a = ". Run chkdsk and mount in Windows."; + static const char *es2b = ". Mount in Windows."; + const char *es1, *es2; + + es2 = es2a; + if (vol->vol_flags & VOLUME_IS_DIRTY) + es1 = es1a; + else if (vol->vol_flags & VOLUME_MODIFIED_BY_CHKDSK) { + es1 = es1b; + es2 = es2b; + } else { + es1 = es1c; + ntfs_warning(sb, "Unsupported volume flags 0x%x " + "encountered.", + (unsigned)le16_to_cpu(vol->vol_flags)); + } /* If a read-write mount, convert it to a read-only mount. */ if (!(sb->s_flags & MS_RDONLY)) { if (!(vol->on_errors & (ON_ERRORS_REMOUNT_RO | @@ -2685,7 +2728,7 @@ static int ntfs_fill_super(struct super_block *sb, void *opt, const int silent) ntfs_volume *vol; struct buffer_head *bh; struct inode *tmp_ino; - int result; + int blocksize, result; ntfs_debug("Entering."); #ifndef NTFS_RW @@ -2724,60 +2767,85 @@ static int ntfs_fill_super(struct super_block *sb, void *opt, const int silent) if (!parse_options(vol, (char*)opt)) goto err_out_now; + /* We support sector sizes up to the PAGE_CACHE_SIZE. */ + if (bdev_hardsect_size(sb->s_bdev) > PAGE_CACHE_SIZE) { + if (!silent) + ntfs_error(sb, "Device has unsupported sector size " + "(%i). The maximum supported sector " + "size on this architecture is %lu " + "bytes.", + bdev_hardsect_size(sb->s_bdev), + PAGE_CACHE_SIZE); + goto err_out_now; + } /* - * TODO: Fail safety check. In the future we should really be able to - * cope with this being the case, but for now just bail out. + * Setup the device access block size to NTFS_BLOCK_SIZE or the hard + * sector size, whichever is bigger. */ - if (bdev_hardsect_size(sb->s_bdev) > NTFS_BLOCK_SIZE) { + blocksize = sb_min_blocksize(sb, NTFS_BLOCK_SIZE); + if (blocksize < NTFS_BLOCK_SIZE) { if (!silent) - ntfs_error(sb, "Device has unsupported hardsect_size."); + ntfs_error(sb, "Unable to set device block size."); goto err_out_now; } - - /* Setup the device access block size to NTFS_BLOCK_SIZE. */ - if (sb_set_blocksize(sb, NTFS_BLOCK_SIZE) != NTFS_BLOCK_SIZE) { + BUG_ON(blocksize != sb->s_blocksize); + ntfs_debug("Set device block size to %i bytes (block size bits %i).", + blocksize, sb->s_blocksize_bits); + /* Determine the size of the device in units of block_size bytes. */ + if (!i_size_read(sb->s_bdev->bd_inode)) { if (!silent) - ntfs_error(sb, "Unable to set block size."); + ntfs_error(sb, "Unable to determine device size."); goto err_out_now; } - - /* Get the size of the device in units of NTFS_BLOCK_SIZE bytes. */ vol->nr_blocks = i_size_read(sb->s_bdev->bd_inode) >> - NTFS_BLOCK_SIZE_BITS; - + sb->s_blocksize_bits; /* Read the boot sector and return unlocked buffer head to it. */ if (!(bh = read_ntfs_boot_sector(sb, silent))) { if (!silent) ntfs_error(sb, "Not an NTFS volume."); goto err_out_now; } - /* - * Extract the data from the boot sector and setup the ntfs super block + * Extract the data from the boot sector and setup the ntfs volume * using it. */ result = parse_ntfs_boot_sector(vol, (NTFS_BOOT_SECTOR*)bh->b_data); - - /* Initialize the cluster and mft allocators. */ - ntfs_setup_allocators(vol); - brelse(bh); - if (!result) { if (!silent) ntfs_error(sb, "Unsupported NTFS filesystem."); goto err_out_now; } - /* - * TODO: When we start coping with sector sizes different from - * NTFS_BLOCK_SIZE, we now probably need to set the blocksize of the - * device (probably to NTFS_BLOCK_SIZE). + * If the boot sector indicates a sector size bigger than the current + * device block size, switch the device block size to the sector size. + * TODO: It may be possible to support this case even when the set + * below fails, we would just be breaking up the i/o for each sector + * into multiple blocks for i/o purposes but otherwise it should just + * work. However it is safer to leave disabled until someone hits this + * error message and then we can get them to try it without the setting + * so we know for sure that it works. */ - + if (vol->sector_size > blocksize) { + blocksize = sb_set_blocksize(sb, vol->sector_size); + if (blocksize != vol->sector_size) { + if (!silent) + ntfs_error(sb, "Unable to set device block " + "size to sector size (%i).", + vol->sector_size); + goto err_out_now; + } + BUG_ON(blocksize != sb->s_blocksize); + vol->nr_blocks = i_size_read(sb->s_bdev->bd_inode) >> + sb->s_blocksize_bits; + ntfs_debug("Changed device block size to %i bytes (block size " + "bits %i) to match volume sector size.", + blocksize, sb->s_blocksize_bits); + } + /* Initialize the cluster and mft allocators. */ + ntfs_setup_allocators(vol); /* Setup remaining fields in the super block. */ sb->s_magic = NTFS_SB_MAGIC; - /* * Ntfs allows 63 bits for the file size, i.e. correct would be: * sb->s_maxbytes = ~0ULL >> 1; @@ -2787,9 +2855,8 @@ static int ntfs_fill_super(struct super_block *sb, void *opt, const int silent) * without overflowing the index or to 2^63 - 1, whichever is smaller. */ sb->s_maxbytes = MAX_LFS_FILESIZE; - + /* Ntfs measures time in 100ns intervals. */ sb->s_time_gran = 100; - /* * Now load the metadata required for the page cache and our address * space operations to function. We do this by setting up a specialised @@ -2987,14 +3054,14 @@ err_out_now: * strings of the maximum length allowed by NTFS, which is NTFS_MAX_NAME_LEN * (255) Unicode characters + a terminating NULL Unicode character. */ -kmem_cache_t *ntfs_name_cache; +struct kmem_cache *ntfs_name_cache; /* Slab caches for efficient allocation/deallocation of inodes. */ -kmem_cache_t *ntfs_inode_cache; -kmem_cache_t *ntfs_big_inode_cache; +struct kmem_cache *ntfs_inode_cache; +struct kmem_cache *ntfs_big_inode_cache; /* Init once constructor for the inode slab cache. */ -static void ntfs_big_inode_init_once(void *foo, kmem_cache_t *cachep, +static void ntfs_big_inode_init_once(void *foo, struct kmem_cache *cachep, unsigned long flags) { ntfs_inode *ni = (ntfs_inode *)foo; @@ -3008,8 +3075,8 @@ static void ntfs_big_inode_init_once(void *foo, kmem_cache_t *cachep, * Slab caches to optimize allocations and deallocations of attribute search * contexts and index contexts, respectively. */ -kmem_cache_t *ntfs_attr_ctx_cache; -kmem_cache_t *ntfs_index_ctx_cache; +struct kmem_cache *ntfs_attr_ctx_cache; +struct kmem_cache *ntfs_index_ctx_cache; /* Driver wide semaphore. */ DECLARE_MUTEX(ntfs_lock); diff --git a/fs/ntfs/upcase.c b/fs/ntfs/upcase.c index 879cdf1..9101807 100644 --- a/fs/ntfs/upcase.c +++ b/fs/ntfs/upcase.c @@ -3,10 +3,7 @@ * Part of the Linux-NTFS project. * * Copyright (c) 2001 Richard Russon <ntfs@flatcap.org> - * Copyright (c) 2001-2004 Anton Altaparmakov - * - * Modified for mkntfs inclusion 9 June 2001 by Anton Altaparmakov. - * Modified for kernel inclusion 10 September 2001 by Anton Altparmakov. + * Copyright (c) 2001-2006 Anton Altaparmakov * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the Free @@ -75,12 +72,13 @@ ntfschar *generate_default_upcase(void) if (!uc) return uc; memset(uc, 0, default_upcase_len * sizeof(ntfschar)); + /* Generate the little endian Unicode upcase table used by ntfs. */ for (i = 0; i < default_upcase_len; i++) uc[i] = cpu_to_le16(i); for (r = 0; uc_run_table[r][0]; r++) for (i = uc_run_table[r][0]; i < uc_run_table[r][1]; i++) - uc[i] = cpu_to_le16((le16_to_cpu(uc[i]) + - uc_run_table[r][2])); + uc[i] = cpu_to_le16(le16_to_cpu(uc[i]) + + uc_run_table[r][2]); for (r = 0; uc_dup_table[r][0]; r++) for (i = uc_dup_table[r][0]; i < uc_dup_table[r][1]; i += 2) uc[i + 1] = cpu_to_le16(le16_to_cpu(uc[i + 1]) - 1); diff --git a/fs/ntfs/volume.h b/fs/ntfs/volume.h index 375cd20..406ab55 100644 --- a/fs/ntfs/volume.h +++ b/fs/ntfs/volume.h @@ -2,7 +2,7 @@ * volume.h - Defines for volume structures in NTFS Linux kernel driver. Part * of the Linux-NTFS project. * - * Copyright (c) 2001-2005 Anton Altaparmakov + * Copyright (c) 2001-2006 Anton Altaparmakov * Copyright (c) 2002 Richard Russon * * This program/include file is free software; you can redistribute it and/or @@ -41,10 +41,8 @@ typedef struct { * structure has stabilized... (AIA) */ /* Device specifics. */ - struct super_block *sb; /* Pointer back to the super_block, - so we don't have to get the offset - every time. */ - LCN nr_blocks; /* Number of NTFS_BLOCK_SIZE bytes + struct super_block *sb; /* Pointer back to the super_block. */ + LCN nr_blocks; /* Number of sb->s_blocksize bytes sized blocks on the device. */ /* Configuration provided by user at mount time. */ unsigned long flags; /* Miscellaneous flags, see below. */ @@ -141,8 +139,8 @@ typedef enum { NV_ShowSystemFiles, /* 1: Return system files in ntfs_readdir(). */ NV_CaseSensitive, /* 1: Treat file names as case sensitive and create filenames in the POSIX namespace. - Otherwise be case insensitive and create - file names in WIN32 namespace. */ + Otherwise be case insensitive but still + create file names in POSIX namespace. */ NV_LogFileEmpty, /* 1: $LogFile journal is empty. */ NV_QuotaOutOfDate, /* 1: $Quota is out of date. */ NV_UsnJrnlStamped, /* 1: $UsnJrnl has been stamped. */ @@ -153,7 +151,7 @@ typedef enum { * Macro tricks to expand the NVolFoo(), NVolSetFoo(), and NVolClearFoo() * functions. */ -#define NVOL_FNS(flag) \ +#define DEFINE_NVOL_BIT_OPS(flag) \ static inline int NVol##flag(ntfs_volume *vol) \ { \ return test_bit(NV_##flag, &(vol)->flags); \ @@ -168,12 +166,12 @@ static inline void NVolClear##flag(ntfs_volume *vol) \ } /* Emit the ntfs volume bitops functions. */ -NVOL_FNS(Errors) -NVOL_FNS(ShowSystemFiles) -NVOL_FNS(CaseSensitive) -NVOL_FNS(LogFileEmpty) -NVOL_FNS(QuotaOutOfDate) -NVOL_FNS(UsnJrnlStamped) -NVOL_FNS(SparseEnabled) +DEFINE_NVOL_BIT_OPS(Errors) +DEFINE_NVOL_BIT_OPS(ShowSystemFiles) +DEFINE_NVOL_BIT_OPS(CaseSensitive) +DEFINE_NVOL_BIT_OPS(LogFileEmpty) +DEFINE_NVOL_BIT_OPS(QuotaOutOfDate) +DEFINE_NVOL_BIT_OPS(UsnJrnlStamped) +DEFINE_NVOL_BIT_OPS(SparseEnabled) #endif /* _LINUX_NTFS_VOLUME_H */ diff --git a/fs/ramfs/inode.c b/fs/ramfs/inode.c index c66bd5e..cde5d48 100644 --- a/fs/ramfs/inode.c +++ b/fs/ramfs/inode.c @@ -27,6 +27,7 @@ #include <linux/fs.h> #include <linux/pagemap.h> #include <linux/highmem.h> +#include <linux/time.h> #include <linux/init.h> #include <linux/string.h> #include <linux/smp_lock.h> @@ -104,6 +105,7 @@ ramfs_mknod(struct inode *dir, struct dentry *dentry, int mode, dev_t dev) d_instantiate(dentry, inode); dget(dentry); /* Extra count - pin the dentry in core */ error = 0; + dir->i_mtime = dir->i_ctime = CURRENT_TIME; } return error; } diff --git a/include/asm-i386/desc.h b/include/asm-i386/desc.h index 494e73b..89b8b82 100644 --- a/include/asm-i386/desc.h +++ b/include/asm-i386/desc.h @@ -24,11 +24,13 @@ struct Xgt_desc_struct { unsigned short pad; } __attribute__ ((packed)); -extern struct Xgt_desc_struct idt_descr, cpu_gdt_descr[NR_CPUS]; +extern struct Xgt_desc_struct idt_descr; +DECLARE_PER_CPU(struct Xgt_desc_struct, cpu_gdt_descr); + static inline struct desc_struct *get_cpu_gdt_table(unsigned int cpu) { - return ((struct desc_struct *)cpu_gdt_descr[cpu].address); + return (struct desc_struct *)per_cpu(cpu_gdt_descr, cpu).address; } #define load_TR_desc() __asm__ __volatile__("ltr %w0"::"q" (GDT_ENTRY_TSS*8)) diff --git a/include/asm-i386/kprobes.h b/include/asm-i386/kprobes.h index 27cac05..a0d2d74 100644 --- a/include/asm-i386/kprobes.h +++ b/include/asm-i386/kprobes.h @@ -27,6 +27,9 @@ #include <linux/types.h> #include <linux/ptrace.h> +#define __ARCH_WANT_KPROBES_INSN_SLOT + +struct kprobe; struct pt_regs; typedef u8 kprobe_opcode_t; @@ -40,14 +43,14 @@ typedef u8 kprobe_opcode_t; #define JPROBE_ENTRY(pentry) (kprobe_opcode_t *)pentry #define ARCH_SUPPORTS_KRETPROBES -#define arch_remove_kprobe(p) do {} while (0) +void arch_remove_kprobe(struct kprobe *p); void kretprobe_trampoline(void); /* Architecture specific copy of original instruction*/ struct arch_specific_insn { /* copy of the original instruction */ - kprobe_opcode_t insn[MAX_INSN_SIZE]; + kprobe_opcode_t *insn; }; struct prev_kprobe { diff --git a/include/asm-m32r/uaccess.h b/include/asm-m32r/uaccess.h index 0da7c47..e8ae619 100644 --- a/include/asm-m32r/uaccess.h +++ b/include/asm-m32r/uaccess.h @@ -328,7 +328,7 @@ extern void __put_user_bad(void); " .long 1b,4b\n" \ " .long 2b,4b\n" \ ".previous" \ - : "=r"(err) \ + : "=&r"(err) \ : "r"(x), "r"(addr), "i"(-EFAULT), "0"(err) \ : "r14", "memory") @@ -353,7 +353,7 @@ extern void __put_user_bad(void); " .long 1b,4b\n" \ " .long 2b,4b\n" \ ".previous" \ - : "=r"(err) \ + : "=&r"(err) \ : "r"(x), "r"(addr), "i"(-EFAULT), "0"(err) \ : "r14", "memory") #else @@ -398,7 +398,7 @@ struct __large_struct { unsigned long buf[100]; }; " .balign 4\n" \ " .long 1b,3b\n" \ ".previous" \ - : "=r"(err) \ + : "=&r"(err) \ : "r"(x), "r"(addr), "i"(-EFAULT), "0"(err) \ : "r14", "memory") @@ -442,7 +442,7 @@ do { \ " .balign 4\n" \ " .long 1b,3b\n" \ ".previous" \ - : "=r"(err), "=&r"(x) \ + : "=&r"(err), "=&r"(x) \ : "r"(addr), "i"(-EFAULT), "0"(err) \ : "r14", "memory") diff --git a/include/asm-powerpc/cputable.h b/include/asm-powerpc/cputable.h index 6421054..90d005b 100644 --- a/include/asm-powerpc/cputable.h +++ b/include/asm-powerpc/cputable.h @@ -159,9 +159,11 @@ extern void do_cpu_ftr_fixups(unsigned long offset); #endif /* We need to mark all pages as being coherent if we're SMP or we - * have a 74[45]x and an MPC107 host bridge. + * have a 74[45]x and an MPC107 host bridge. Also 83xx requires + * it for PCI "streaming/prefetch" to work properly. */ -#if defined(CONFIG_SMP) || defined(CONFIG_MPC10X_BRIDGE) +#if defined(CONFIG_SMP) || defined(CONFIG_MPC10X_BRIDGE) \ + || defined(CONFIG_PPC_83xx) #define CPU_FTR_COMMON CPU_FTR_NEED_COHERENT #else #define CPU_FTR_COMMON 0 @@ -277,7 +279,8 @@ enum { CPU_FTRS_G2_LE = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_HAS_HIGH_BATS, CPU_FTRS_E300 = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_MAYBE_CAN_DOZE | - CPU_FTR_USE_TB | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_HAS_HIGH_BATS, + CPU_FTR_USE_TB | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_HAS_HIGH_BATS | + CPU_FTR_COMMON, CPU_FTRS_CLASSIC32 = CPU_FTR_COMMON | CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE, CPU_FTRS_POWER3_32 = CPU_FTR_COMMON | CPU_FTR_SPLIT_ID_CACHE | diff --git a/include/asm-powerpc/mmu.h b/include/asm-powerpc/mmu.h index d096d9e..b0b9a3f 100644 --- a/include/asm-powerpc/mmu.h +++ b/include/asm-powerpc/mmu.h @@ -112,6 +112,7 @@ typedef struct { } hpte_t; extern hpte_t *htab_address; +extern unsigned long htab_size_bytes; extern unsigned long htab_hash_mask; /* diff --git a/include/asm-powerpc/reg.h b/include/asm-powerpc/reg.h index 12ecc9b..72bfe3a 100644 --- a/include/asm-powerpc/reg.h +++ b/include/asm-powerpc/reg.h @@ -615,27 +615,9 @@ #define proc_trap() asm volatile("trap") #ifdef CONFIG_PPC64 -static inline void ppc64_runlatch_on(void) -{ - unsigned long ctrl; - - if (cpu_has_feature(CPU_FTR_CTRL)) { - ctrl = mfspr(SPRN_CTRLF); - ctrl |= CTRL_RUNLATCH; - mtspr(SPRN_CTRLT, ctrl); - } -} - -static inline void ppc64_runlatch_off(void) -{ - unsigned long ctrl; - - if (cpu_has_feature(CPU_FTR_CTRL)) { - ctrl = mfspr(SPRN_CTRLF); - ctrl &= ~CTRL_RUNLATCH; - mtspr(SPRN_CTRLT, ctrl); - } -} + +extern void ppc64_runlatch_on(void); +extern void ppc64_runlatch_off(void); extern unsigned long scom970_read(unsigned int address); extern void scom970_write(unsigned int address, unsigned long value); @@ -645,15 +627,6 @@ extern void scom970_write(unsigned int address, unsigned long value); #define __get_SP() ({unsigned long sp; \ asm volatile("mr %0,1": "=r" (sp)); sp;}) -#else /* __ASSEMBLY__ */ - -#define RUNLATCH_ON(REG) \ -BEGIN_FTR_SECTION \ - mfspr (REG),SPRN_CTRLF; \ - ori (REG),(REG),CTRL_RUNLATCH; \ - mtspr SPRN_CTRLT,(REG); \ -END_FTR_SECTION_IFSET(CPU_FTR_CTRL) - #endif /* __ASSEMBLY__ */ #endif /* __KERNEL__ */ #endif /* _ASM_POWERPC_REG_H */ diff --git a/include/asm-powerpc/thread_info.h b/include/asm-powerpc/thread_info.h index c044ec1..237fc2b 100644 --- a/include/asm-powerpc/thread_info.h +++ b/include/asm-powerpc/thread_info.h @@ -113,7 +113,7 @@ static inline struct thread_info *current_thread_info(void) #define TIF_POLLING_NRFLAG 4 /* true if poll_idle() is polling TIF_NEED_RESCHED */ #define TIF_32BIT 5 /* 32 bit binary */ -/* #define SPARE 6 */ +#define TIF_RUNLATCH 6 /* Is the runlatch enabled? */ #define TIF_ABI_PENDING 7 /* 32/64 bit switch needed */ #define TIF_SYSCALL_AUDIT 8 /* syscall auditing active */ #define TIF_SINGLESTEP 9 /* singlestepping active */ @@ -131,7 +131,7 @@ static inline struct thread_info *current_thread_info(void) #define _TIF_NEED_RESCHED (1<<TIF_NEED_RESCHED) #define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG) #define _TIF_32BIT (1<<TIF_32BIT) -/* #define _SPARE (1<<SPARE) */ +#define _TIF_RUNLATCH (1<<TIF_RUNLATCH) #define _TIF_ABI_PENDING (1<<TIF_ABI_PENDING) #define _TIF_SYSCALL_AUDIT (1<<TIF_SYSCALL_AUDIT) #define _TIF_SINGLESTEP (1<<TIF_SINGLESTEP) diff --git a/include/asm-sparc64/futex.h b/include/asm-sparc64/futex.h index 6a332a9..0caf601 100644 --- a/include/asm-sparc64/futex.h +++ b/include/asm-sparc64/futex.h @@ -1,6 +1,86 @@ -#ifndef _ASM_FUTEX_H -#define _ASM_FUTEX_H +#ifndef _SPARC64_FUTEX_H +#define _SPARC64_FUTEX_H -#include <asm-generic/futex.h> +#include <linux/futex.h> +#include <asm/errno.h> +#include <asm/system.h> +#include <asm/uaccess.h> -#endif +#define __futex_cas_op(insn, ret, oldval, uaddr, oparg) \ + __asm__ __volatile__( \ + "\n1: lduwa [%3] %%asi, %2\n" \ + " " insn "\n" \ + "2: casa [%3] %%asi, %2, %1\n" \ + " cmp %2, %1\n" \ + " bne,pn %%icc, 1b\n" \ + " mov 0, %0\n" \ + "3:\n" \ + " .section .fixup,#alloc,#execinstr\n" \ + " .align 4\n" \ + "4: ba 3b\n" \ + " mov %5, %0\n" \ + " .previous\n" \ + " .section __ex_table,#alloc\n" \ + " .align 4\n" \ + " .word 1b, 4b\n" \ + " .word 2b, 4b\n" \ + " .previous\n" \ + : "=&r" (ret), "=&r" (oldval), "=&r" (tem) \ + : "r" (uaddr), "r" (oparg), "i" (-EFAULT) \ + : "memory") + +static inline int futex_atomic_op_inuser(int encoded_op, int __user *uaddr) +{ + int op = (encoded_op >> 28) & 7; + int cmp = (encoded_op >> 24) & 15; + int oparg = (encoded_op << 8) >> 20; + int cmparg = (encoded_op << 20) >> 20; + int oldval = 0, ret, tem; + + if (unlikely(!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))) + return -EFAULT; + if (unlikely((((unsigned long) uaddr) & 0x3UL))) + return -EINVAL; + + if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28)) + oparg = 1 << oparg; + + inc_preempt_count(); + + switch (op) { + case FUTEX_OP_SET: + __futex_cas_op("mov\t%4, %1", ret, oldval, uaddr, oparg); + break; + case FUTEX_OP_ADD: + __futex_cas_op("add\t%2, %4, %1", ret, oldval, uaddr, oparg); + break; + case FUTEX_OP_OR: + __futex_cas_op("or\t%2, %4, %1", ret, oldval, uaddr, oparg); + break; + case FUTEX_OP_ANDN: + __futex_cas_op("and\t%2, %4, %1", ret, oldval, uaddr, oparg); + break; + case FUTEX_OP_XOR: + __futex_cas_op("xor\t%2, %4, %1", ret, oldval, uaddr, oparg); + break; + default: + ret = -ENOSYS; + } + + dec_preempt_count(); + + if (!ret) { + switch (cmp) { + case FUTEX_OP_CMP_EQ: ret = (oldval == cmparg); break; + case FUTEX_OP_CMP_NE: ret = (oldval != cmparg); break; + case FUTEX_OP_CMP_LT: ret = (oldval < cmparg); break; + case FUTEX_OP_CMP_GE: ret = (oldval >= cmparg); break; + case FUTEX_OP_CMP_LE: ret = (oldval <= cmparg); break; + case FUTEX_OP_CMP_GT: ret = (oldval > cmparg); break; + default: ret = -ENOSYS; + } + } + return ret; +} + +#endif /* !(_SPARC64_FUTEX_H) */ diff --git a/include/asm-sparc64/smp.h b/include/asm-sparc64/smp.h index 110a2de..473edb2 100644 --- a/include/asm-sparc64/smp.h +++ b/include/asm-sparc64/smp.h @@ -66,8 +66,14 @@ static __inline__ int hard_smp_processor_id(void) #define raw_smp_processor_id() (current_thread_info()->cpu) +extern void smp_setup_cpu_possible_map(void); + #endif /* !(__ASSEMBLY__) */ +#else + +#define smp_setup_cpu_possible_map() do { } while (0) + #endif /* !(CONFIG_SMP) */ #define NO_PROC_ID 0xFF diff --git a/include/asm-x86_64/acpi.h b/include/asm-x86_64/acpi.h index aa1c7b2..e2b9923 100644 --- a/include/asm-x86_64/acpi.h +++ b/include/asm-x86_64/acpi.h @@ -164,6 +164,20 @@ extern u8 x86_acpiid_to_apicid[]; extern int acpi_skip_timer_override; +extern int unsync_tsc_on_multicluster; + +static inline int acpi_madt_oem_check(char *oem, char *productid) +{ + /* Copied from i386. Probably has too many entries. */ + if (!strncmp(oem, "IBM ENSW", 8) && + (!strncmp(productid, "VIGIL SMP", 9) + || !strncmp(productid, "EXA", 3) + || !strncmp(productid, "RUTHLESS SMP", 12))) { + unsync_tsc_on_multicluster = 1; + } + return 0; +} + #endif /*__KERNEL__*/ #endif /*_ASM_ACPI_H*/ diff --git a/include/asm-x86_64/pci.h b/include/asm-x86_64/pci.h index fd03e15..8a05af2 100644 --- a/include/asm-x86_64/pci.h +++ b/include/asm-x86_64/pci.h @@ -19,8 +19,6 @@ extern unsigned int pcibios_assign_all_busses(void); #endif #define pcibios_scan_all_fns(a, b) 0 -extern int no_iommu, force_iommu; - extern unsigned long pci_mem_start; #define PCIBIOS_MIN_IO 0x1000 #define PCIBIOS_MIN_MEM (pci_mem_start) diff --git a/include/asm-x86_64/pgtable.h b/include/asm-x86_64/pgtable.h index 8fbf4dd..715fd94 100644 --- a/include/asm-x86_64/pgtable.h +++ b/include/asm-x86_64/pgtable.h @@ -131,7 +131,7 @@ static inline pte_t ptep_get_and_clear_full(struct mm_struct *mm, unsigned long #define PGDIR_SIZE (1UL << PGDIR_SHIFT) #define PGDIR_MASK (~(PGDIR_SIZE-1)) -#define USER_PTRS_PER_PGD (TASK_SIZE/PGDIR_SIZE) +#define USER_PTRS_PER_PGD ((TASK_SIZE-1)/PGDIR_SIZE+1) #define FIRST_USER_ADDRESS 0 #ifndef __ASSEMBLY__ diff --git a/include/asm-x86_64/proto.h b/include/asm-x86_64/proto.h index eca3f2d..3ba8fd4 100644 --- a/include/asm-x86_64/proto.h +++ b/include/asm-x86_64/proto.h @@ -39,7 +39,6 @@ extern void config_acpi_tables(void); extern void ia32_syscall(void); extern void iommu_hole_init(void); -extern void time_init_gtod(void); extern int pmtimer_mark_offset(void); extern void pmtimer_resume(void); extern void pmtimer_wait(unsigned); @@ -134,6 +133,7 @@ extern int force_iommu; extern int reboot_force; extern int notsc_setup(char *); +extern int setup_additional_cpus(char *); extern void smp_local_timer_interrupt(struct pt_regs * regs); diff --git a/include/linux/serial_reg.h b/include/linux/serial_reg.h index 6a2bb95..3c8a6aa 100644 --- a/include/linux/serial_reg.h +++ b/include/linux/serial_reg.h @@ -247,10 +247,10 @@ #define UART_CTR 0xFF /* - * The 16C950 Additional Control Reigster + * The 16C950 Additional Control Register */ #define UART_ACR_RXDIS 0x01 /* Receiver disable */ -#define UART_ACR_TXDIS 0x02 /* Receiver disable */ +#define UART_ACR_TXDIS 0x02 /* Transmitter disable */ #define UART_ACR_DSRFC 0x04 /* DSR Flow Control */ #define UART_ACR_TLENB 0x20 /* 950 trigger levels enable */ #define UART_ACR_ICRRD 0x40 /* ICR Read enable */ diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h index d73501b..b9ea44a 100644 --- a/include/linux/syscalls.h +++ b/include/linux/syscalls.h @@ -543,7 +543,7 @@ asmlinkage long sys_unlinkat(int dfd, const char __user * pathname, int flag); asmlinkage long sys_symlinkat(const char __user * oldname, int newdfd, const char __user * newname); asmlinkage long sys_linkat(int olddfd, const char __user *oldname, - int newdfd, const char __user *newname); + int newdfd, const char __user *newname, int flags); asmlinkage long sys_renameat(int olddfd, const char __user * oldname, int newdfd, const char __user * newname); asmlinkage long sys_futimesat(int dfd, char __user *filename, diff --git a/include/net/xfrm.h b/include/net/xfrm.h index d6111a2..004e645 100644 --- a/include/net/xfrm.h +++ b/include/net/xfrm.h @@ -403,6 +403,11 @@ unsigned xfrm_spi_hash(xfrm_address_t *addr, u32 spi, u8 proto, unsigned short f extern void __xfrm_state_destroy(struct xfrm_state *); +static inline void __xfrm_state_put(struct xfrm_state *x) +{ + atomic_dec(&x->refcnt); +} + static inline void xfrm_state_put(struct xfrm_state *x) { if (atomic_dec_and_test(&x->refcnt)) diff --git a/mm/mempolicy.c b/mm/mempolicy.c index 880831b..67af4ce 100644 --- a/mm/mempolicy.c +++ b/mm/mempolicy.c @@ -552,7 +552,7 @@ static void migrate_page_add(struct page *page, struct list_head *pagelist, */ if ((flags & MPOL_MF_MOVE_ALL) || page_mapcount(page) == 1) { if (isolate_lru_page(page)) - list_add(&page->lru, pagelist); + list_add_tail(&page->lru, pagelist); } } @@ -569,6 +569,7 @@ static int migrate_pages_to(struct list_head *pagelist, LIST_HEAD(moved); LIST_HEAD(failed); int err = 0; + unsigned long offset = 0; int nr_pages; struct page *page; struct list_head *p; @@ -576,8 +577,21 @@ static int migrate_pages_to(struct list_head *pagelist, redo: nr_pages = 0; list_for_each(p, pagelist) { - if (vma) - page = alloc_page_vma(GFP_HIGHUSER, vma, vma->vm_start); + if (vma) { + /* + * The address passed to alloc_page_vma is used to + * generate the proper interleave behavior. We fake + * the address here by an increasing offset in order + * to get the proper distribution of pages. + * + * No decision has been made as to which page + * a certain old page is moved to so we cannot + * specify the correct address. + */ + page = alloc_page_vma(GFP_HIGHUSER, vma, + offset + vma->vm_start); + offset += PAGE_SIZE; + } else page = alloc_pages_node(dest, GFP_HIGHUSER, 0); @@ -585,7 +599,7 @@ redo: err = -ENOMEM; goto out; } - list_add(&page->lru, &newlist); + list_add_tail(&page->lru, &newlist); nr_pages++; if (nr_pages > MIGRATE_CHUNK_SIZE) break; diff --git a/mm/vmscan.c b/mm/vmscan.c index 1838c15..b0af759 100644 --- a/mm/vmscan.c +++ b/mm/vmscan.c @@ -1908,7 +1908,12 @@ int zone_reclaim(struct zone *zone, gfp_t gfp_mask, unsigned int order) sc.swap_cluster_max = SWAP_CLUSTER_MAX; cond_resched(); - p->flags |= PF_MEMALLOC; + /* + * We need to be able to allocate from the reserves for RECLAIM_SWAP + * and we also need to be able to write out pages for RECLAIM_WRITE + * and RECLAIM_SWAP. + */ + p->flags |= PF_MEMALLOC | PF_SWAPWRITE; reclaim_state.reclaimed_slab = 0; p->reclaim_state = &reclaim_state; @@ -1932,11 +1937,10 @@ int zone_reclaim(struct zone *zone, gfp_t gfp_mask, unsigned int order) * a long time. */ shrink_slab(sc.nr_scanned, gfp_mask, order); - sc.nr_reclaimed = 1; /* Avoid getting the off node timeout */ } p->reclaim_state = NULL; - current->flags &= ~PF_MEMALLOC; + current->flags &= ~(PF_MEMALLOC | PF_SWAPWRITE); if (sc.nr_reclaimed == 0) zone->last_unsuccessful_zone_reclaim = jiffies; diff --git a/net/bridge/br_netfilter.c b/net/bridge/br_netfilter.c index 6bb0c7e..e060aad 100644 --- a/net/bridge/br_netfilter.c +++ b/net/bridge/br_netfilter.c @@ -90,6 +90,7 @@ static struct rtable __fake_rtable = { .dev = &__fake_net_device, .path = &__fake_rtable.u.dst, .metrics = {[RTAX_MTU - 1] = 1500}, + .flags = DST_NOXFRM, } }, .rt_flags = 0, diff --git a/net/ethernet/eth.c b/net/ethernet/eth.c index 9890fd9..c971f14 100644 --- a/net/ethernet/eth.c +++ b/net/ethernet/eth.c @@ -95,6 +95,12 @@ int eth_header(struct sk_buff *skb, struct net_device *dev, unsigned short type, saddr = dev->dev_addr; memcpy(eth->h_source,saddr,dev->addr_len); + if(daddr) + { + memcpy(eth->h_dest,daddr,dev->addr_len); + return ETH_HLEN; + } + /* * Anyway, the loopback-device should never use this function... */ @@ -105,12 +111,6 @@ int eth_header(struct sk_buff *skb, struct net_device *dev, unsigned short type, return ETH_HLEN; } - if(daddr) - { - memcpy(eth->h_dest,daddr,dev->addr_len); - return ETH_HLEN; - } - return -ETH_HLEN; } diff --git a/net/ipv4/route.c b/net/ipv4/route.c index d82c242..fca5fe0 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -835,7 +835,7 @@ static int rt_garbage_collect(void) int r; rthp = rt_remove_balanced_route( - &rt_hash_table[i].chain, + &rt_hash_table[k].chain, rth, &r); goal -= r; diff --git a/net/ipv4/xfrm4_policy.c b/net/ipv4/xfrm4_policy.c index 45f7ae5..f285bbf 100644 --- a/net/ipv4/xfrm4_policy.c +++ b/net/ipv4/xfrm4_policy.c @@ -35,6 +35,7 @@ __xfrm4_find_bundle(struct flowi *fl, struct xfrm_policy *policy) if (xdst->u.rt.fl.oif == fl->oif && /*XXX*/ xdst->u.rt.fl.fl4_dst == fl->fl4_dst && xdst->u.rt.fl.fl4_src == fl->fl4_src && + xdst->u.rt.fl.fl4_tos == fl->fl4_tos && xfrm_bundle_ok(xdst, fl, AF_INET)) { dst_clone(dst); break; @@ -61,7 +62,8 @@ __xfrm4_bundle_create(struct xfrm_policy *policy, struct xfrm_state **xfrm, int .nl_u = { .ip4_u = { .saddr = local, - .daddr = remote + .daddr = remote, + .tos = fl->fl4_tos } } }; @@ -230,6 +232,7 @@ _decode_session4(struct sk_buff *skb, struct flowi *fl) fl->proto = iph->protocol; fl->fl4_dst = iph->daddr; fl->fl4_src = iph->saddr; + fl->fl4_tos = iph->tos; } static inline int xfrm4_garbage_collect(void) diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c index efa3e72..f999edd 100644 --- a/net/ipv6/ip6_output.c +++ b/net/ipv6/ip6_output.c @@ -494,6 +494,7 @@ static int ip6_fragment(struct sk_buff *skb, int (*output)(struct sk_buff *)) struct net_device *dev; struct sk_buff *frag; struct rt6_info *rt = (struct rt6_info*)skb->dst; + struct ipv6_pinfo *np = skb->sk ? inet6_sk(skb->sk) : NULL; struct ipv6hdr *tmp_hdr; struct frag_hdr *fh; unsigned int mtu, hlen, left, len; @@ -505,7 +506,12 @@ static int ip6_fragment(struct sk_buff *skb, int (*output)(struct sk_buff *)) hlen = ip6_find_1stfragopt(skb, &prevhdr); nexthdr = *prevhdr; - mtu = dst_mtu(&rt->u.dst) - hlen - sizeof(struct frag_hdr); + mtu = dst_mtu(&rt->u.dst); + if (np && np->frag_size < mtu) { + if (np->frag_size) + mtu = np->frag_size; + } + mtu -= hlen + sizeof(struct frag_hdr); if (skb_shinfo(skb)->frag_list) { int first_len = skb_pagelen(skb); @@ -882,7 +888,12 @@ int ip6_append_data(struct sock *sk, int getfrag(void *from, char *to, inet->cork.fl = *fl; np->cork.hop_limit = hlimit; np->cork.tclass = tclass; - inet->cork.fragsize = mtu = dst_mtu(rt->u.dst.path); + mtu = dst_mtu(rt->u.dst.path); + if (np && np->frag_size < mtu) { + if (np->frag_size) + mtu = np->frag_size; + } + inet->cork.fragsize = mtu; if (dst_allfrag(rt->u.dst.path)) inet->cork.flags |= IPCORK_ALLFRAG; inet->cork.length = 0; diff --git a/net/ipv6/ip6_tunnel.c b/net/ipv6/ip6_tunnel.c index faea8a1..4859753 100644 --- a/net/ipv6/ip6_tunnel.c +++ b/net/ipv6/ip6_tunnel.c @@ -884,6 +884,7 @@ ip6ip6_tnl_change(struct ip6_tnl *t, struct ip6_tnl_parm *p) t->parms.encap_limit = p->encap_limit; t->parms.flowinfo = p->flowinfo; t->parms.link = p->link; + ip6_tnl_dst_reset(t); ip6ip6_tnl_link_config(t); return 0; } diff --git a/net/key/af_key.c b/net/key/af_key.c index ae86d23..b2d4d1d 100644 --- a/net/key/af_key.c +++ b/net/key/af_key.c @@ -1423,7 +1423,7 @@ static int pfkey_add(struct sock *sk, struct sk_buff *skb, struct sadb_msg *hdr, if (err < 0) { x->km.state = XFRM_STATE_DEAD; - xfrm_state_put(x); + __xfrm_state_put(x); goto out; } diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c index 5e6b05a..8206025 100644 --- a/net/xfrm/xfrm_policy.c +++ b/net/xfrm/xfrm_policy.c @@ -782,7 +782,7 @@ int xfrm_lookup(struct dst_entry **dst_p, struct flowi *fl, int nx = 0; int err; u32 genid; - u16 family = dst_orig->ops->family; + u16 family; u8 dir = policy_to_flow_dir(XFRM_POLICY_OUT); u32 sk_sid = security_sk_sid(sk, fl, dir); restart: @@ -796,13 +796,14 @@ restart: if ((dst_orig->flags & DST_NOXFRM) || !xfrm_policy_list[XFRM_POLICY_OUT]) return 0; - policy = flow_cache_lookup(fl, sk_sid, family, dir, - xfrm_policy_lookup); + policy = flow_cache_lookup(fl, sk_sid, dst_orig->ops->family, + dir, xfrm_policy_lookup); } if (!policy) return 0; + family = dst_orig->ops->family; policy->curlft.use_time = (unsigned long)xtime.tv_sec; switch (policy->action) { diff --git a/net/xfrm/xfrm_state.c b/net/xfrm/xfrm_state.c index e12d0be..c656cba 100644 --- a/net/xfrm/xfrm_state.c +++ b/net/xfrm/xfrm_state.c @@ -220,14 +220,14 @@ static int __xfrm_state_delete(struct xfrm_state *x) x->km.state = XFRM_STATE_DEAD; spin_lock(&xfrm_state_lock); list_del(&x->bydst); - atomic_dec(&x->refcnt); + __xfrm_state_put(x); if (x->id.spi) { list_del(&x->byspi); - atomic_dec(&x->refcnt); + __xfrm_state_put(x); } spin_unlock(&xfrm_state_lock); if (del_timer(&x->timer)) - atomic_dec(&x->refcnt); + __xfrm_state_put(x); /* The number two in this test is the reference * mentioned in the comment below plus the reference @@ -243,7 +243,7 @@ static int __xfrm_state_delete(struct xfrm_state *x) * The xfrm_state_alloc call gives a reference, and that * is what we are dropping here. */ - atomic_dec(&x->refcnt); + __xfrm_state_put(x); err = 0; } diff --git a/net/xfrm/xfrm_user.c b/net/xfrm/xfrm_user.c index ac87a09..7de1755 100644 --- a/net/xfrm/xfrm_user.c +++ b/net/xfrm/xfrm_user.c @@ -345,7 +345,7 @@ static int xfrm_add_sa(struct sk_buff *skb, struct nlmsghdr *nlh, void **xfrma) if (err < 0) { x->km.state = XFRM_STATE_DEAD; - xfrm_state_put(x); + __xfrm_state_put(x); goto out; } diff --git a/sound/drivers/opl3/opl3_oss.c b/sound/drivers/opl3/opl3_oss.c index 31f1f2e..0345ae6 100644 --- a/sound/drivers/opl3/opl3_oss.c +++ b/sound/drivers/opl3/opl3_oss.c @@ -146,7 +146,7 @@ void snd_opl3_init_seq_oss(struct snd_opl3 *opl3, char *name) void snd_opl3_free_seq_oss(struct snd_opl3 *opl3) { if (opl3->oss_seq_dev) { - snd_device_free(opl3->card, opl3->oss_seq_dev); + /* The instance should have been released in prior */ opl3->oss_seq_dev = NULL; } } diff --git a/sound/isa/cs423x/cs4236.c b/sound/isa/cs423x/cs4236.c index 4fa4310..99a4213 100644 --- a/sound/isa/cs423x/cs4236.c +++ b/sound/isa/cs423x/cs4236.c @@ -414,7 +414,7 @@ static int __devinit snd_card_cs423x_pnpc(int dev, struct snd_card_cs4236 *acard } /* MPU initialization */ if (acard->mpu && mpu_port[dev] > 0) { - if (snd_cs423x_pnp_init_mpu(dev, acard->ctrl, cfg) < 0) + if (snd_cs423x_pnp_init_mpu(dev, acard->mpu, cfg) < 0) goto error; } kfree(cfg); |