diff options
Diffstat (limited to 'arch/arm/mach-omap2/pm-domain.c')
| -rw-r--r-- | arch/arm/mach-omap2/pm-domain.c | 299 |
1 files changed, 0 insertions, 299 deletions
diff --git a/arch/arm/mach-omap2/pm-domain.c b/arch/arm/mach-omap2/pm-domain.c deleted file mode 100644 index 2494091..0000000 --- a/arch/arm/mach-omap2/pm-domain.c +++ /dev/null @@ -1,299 +0,0 @@ -/* - * linux/arch/arm/mach-omap2/pm-domain.c - * - * Power domain functions for OMAP2 - * - * Copyright (C) 2006 Nokia Corporation - * Tony Lindgren <tony@atomide.com> - * - * Some code based on earlier OMAP2 sample PM code - * Copyright (C) 2005 Texas Instruments, Inc. - * Richard Woodruff <r-woodruff2@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/clk.h> - -#include <asm/io.h> - -#include "prcm-regs.h" - -/* Power domain offsets */ -#define PM_MPU_OFFSET 0x100 -#define PM_CORE_OFFSET 0x200 -#define PM_GFX_OFFSET 0x300 -#define PM_WKUP_OFFSET 0x400 /* Autoidle only */ -#define PM_PLL_OFFSET 0x500 /* Autoidle only */ -#define PM_DSP_OFFSET 0x800 -#define PM_MDM_OFFSET 0xc00 - -/* Power domain wake-up dependency control register */ -#define PM_WKDEP_OFFSET 0xc8 -#define EN_MDM (1 << 5) -#define EN_WKUP (1 << 4) -#define EN_GFX (1 << 3) -#define EN_DSP (1 << 2) -#define EN_MPU (1 << 1) -#define EN_CORE (1 << 0) - -/* Core power domain state transition control register */ -#define PM_PWSTCTRL_OFFSET 0xe0 -#define FORCESTATE (1 << 18) /* Only for DSP & GFX */ -#define MEM4RETSTATE (1 << 6) -#define MEM3RETSTATE (1 << 5) -#define MEM2RETSTATE (1 << 4) -#define MEM1RETSTATE (1 << 3) -#define LOGICRETSTATE (1 << 2) /* Logic is retained */ -#define POWERSTATE_OFF 0x3 -#define POWERSTATE_RETENTION 0x1 -#define POWERSTATE_ON 0x0 - -/* Power domain state register */ -#define PM_PWSTST_OFFSET 0xe4 - -/* Hardware supervised state transition control register */ -#define CM_CLKSTCTRL_OFFSET 0x48 -#define AUTOSTAT_MPU (1 << 0) /* MPU */ -#define AUTOSTAT_DSS (1 << 2) /* Core */ -#define AUTOSTAT_L4 (1 << 1) /* Core */ -#define AUTOSTAT_L3 (1 << 0) /* Core */ -#define AUTOSTAT_GFX (1 << 0) /* GFX */ -#define AUTOSTAT_IVA (1 << 8) /* 2420 IVA in DSP domain */ -#define AUTOSTAT_DSP (1 << 0) /* DSP */ -#define AUTOSTAT_MDM (1 << 0) /* MDM */ - -/* Automatic control of interface clock idling */ -#define CM_AUTOIDLE1_OFFSET 0x30 -#define CM_AUTOIDLE2_OFFSET 0x34 /* Core only */ -#define CM_AUTOIDLE3_OFFSET 0x38 /* Core only */ -#define CM_AUTOIDLE4_OFFSET 0x3c /* Core only */ -#define AUTO_54M(x) (((x) & 0x3) << 6) -#define AUTO_96M(x) (((x) & 0x3) << 2) -#define AUTO_DPLL(x) (((x) & 0x3) << 0) -#define AUTO_STOPPED 0x3 -#define AUTO_BYPASS_FAST 0x2 /* DPLL only */ -#define AUTO_BYPASS_LOW_POWER 0x1 /* DPLL only */ -#define AUTO_DISABLED 0x0 - -/* Voltage control PRCM_VOLTCTRL bits */ -#define AUTO_EXTVOLT (1 << 15) -#define FORCE_EXTVOLT (1 << 14) -#define SETOFF_LEVEL(x) (((x) & 0x3) << 12) -#define MEMRETCTRL (1 << 8) -#define SETRET_LEVEL(x) (((x) & 0x3) << 6) -#define VOLT_LEVEL(x) (((x) & 0x3) << 0) - -#define OMAP24XX_PRCM_VBASE IO_ADDRESS(OMAP24XX_PRCM_BASE) -#define prcm_readl(r) __raw_readl(OMAP24XX_PRCM_VBASE + (r)) -#define prcm_writel(v, r) __raw_writel((v), OMAP24XX_PRCM_VBASE + (r)) - -static u32 pmdomain_get_wakeup_dependencies(int domain_offset) -{ - return prcm_readl(domain_offset + PM_WKDEP_OFFSET); -} - -static void pmdomain_set_wakeup_dependencies(u32 state, int domain_offset) -{ - prcm_writel(state, domain_offset + PM_WKDEP_OFFSET); -} - -static u32 pmdomain_get_powerstate(int domain_offset) -{ - return prcm_readl(domain_offset + PM_PWSTCTRL_OFFSET); -} - -static void pmdomain_set_powerstate(u32 state, int domain_offset) -{ - prcm_writel(state, domain_offset + PM_PWSTCTRL_OFFSET); -} - -static u32 pmdomain_get_clock_autocontrol(int domain_offset) -{ - return prcm_readl(domain_offset + CM_CLKSTCTRL_OFFSET); -} - -static void pmdomain_set_clock_autocontrol(u32 state, int domain_offset) -{ - prcm_writel(state, domain_offset + CM_CLKSTCTRL_OFFSET); -} - -static u32 pmdomain_get_clock_autoidle1(int domain_offset) -{ - return prcm_readl(domain_offset + CM_AUTOIDLE1_OFFSET); -} - -/* Core domain only */ -static u32 pmdomain_get_clock_autoidle2(int domain_offset) -{ - return prcm_readl(domain_offset + CM_AUTOIDLE2_OFFSET); -} - -/* Core domain only */ -static u32 pmdomain_get_clock_autoidle3(int domain_offset) -{ - return prcm_readl(domain_offset + CM_AUTOIDLE3_OFFSET); -} - -/* Core domain only */ -static u32 pmdomain_get_clock_autoidle4(int domain_offset) -{ - return prcm_readl(domain_offset + CM_AUTOIDLE4_OFFSET); -} - -static void pmdomain_set_clock_autoidle1(u32 state, int domain_offset) -{ - prcm_writel(state, CM_AUTOIDLE1_OFFSET + domain_offset); -} - -/* Core domain only */ -static void pmdomain_set_clock_autoidle2(u32 state, int domain_offset) -{ - prcm_writel(state, CM_AUTOIDLE2_OFFSET + domain_offset); -} - -/* Core domain only */ -static void pmdomain_set_clock_autoidle3(u32 state, int domain_offset) -{ - prcm_writel(state, CM_AUTOIDLE3_OFFSET + domain_offset); -} - -/* Core domain only */ -static void pmdomain_set_clock_autoidle4(u32 state, int domain_offset) -{ - prcm_writel(state, CM_AUTOIDLE4_OFFSET + domain_offset); -} - -/* - * Configures power management domains to idle clocks automatically. - */ -void pmdomain_set_autoidle(void) -{ - u32 val; - - /* Set PLL auto stop for 54M, 96M & DPLL */ - pmdomain_set_clock_autoidle1(AUTO_54M(AUTO_STOPPED) | - AUTO_96M(AUTO_STOPPED) | - AUTO_DPLL(AUTO_STOPPED), PM_PLL_OFFSET); - - /* External clock input control - * REVISIT: Should this be in clock framework? - */ - PRCM_CLKSRC_CTRL |= (0x3 << 3); - - /* Configure number of 32KHz clock cycles for sys_clk */ - PRCM_CLKSSETUP = 0x00ff; - - /* Configure automatic voltage transition */ - PRCM_VOLTSETUP = 0; - val = PRCM_VOLTCTRL; - val &= ~(SETOFF_LEVEL(0x3) | VOLT_LEVEL(0x3)); - val |= SETOFF_LEVEL(1) | VOLT_LEVEL(1) | AUTO_EXTVOLT; - PRCM_VOLTCTRL = val; - - /* Disable emulation tools functional clock */ - PRCM_CLKEMUL_CTRL = 0x0; - - /* Set core memory retention state */ - val = pmdomain_get_powerstate(PM_CORE_OFFSET); - if (cpu_is_omap2420()) { - val &= ~(0x7 << 3); - val |= (MEM3RETSTATE | MEM2RETSTATE | MEM1RETSTATE); - } else { - val &= ~(0xf << 3); - val |= (MEM4RETSTATE | MEM3RETSTATE | MEM2RETSTATE | - MEM1RETSTATE); - } - pmdomain_set_powerstate(val, PM_CORE_OFFSET); - - /* OCP interface smart idle. REVISIT: Enable autoidle bit0 ? */ - val = SMS_SYSCONFIG; - val &= ~(0x3 << 3); - val |= (0x2 << 3) | (1 << 0); - SMS_SYSCONFIG |= val; - - val = SDRC_SYSCONFIG; - val &= ~(0x3 << 3); - val |= (0x2 << 3); - SDRC_SYSCONFIG = val; - - /* Configure L3 interface for smart idle. - * REVISIT: Enable autoidle bit0 ? - */ - val = GPMC_SYSCONFIG; - val &= ~(0x3 << 3); - val |= (0x2 << 3) | (1 << 0); - GPMC_SYSCONFIG = val; - - pmdomain_set_powerstate(LOGICRETSTATE | POWERSTATE_RETENTION, - PM_MPU_OFFSET); - pmdomain_set_powerstate(POWERSTATE_RETENTION, PM_CORE_OFFSET); - if (!cpu_is_omap2420()) - pmdomain_set_powerstate(POWERSTATE_RETENTION, PM_MDM_OFFSET); - - /* Assume suspend function has saved the state for DSP and GFX */ - pmdomain_set_powerstate(FORCESTATE | POWERSTATE_OFF, PM_DSP_OFFSET); - pmdomain_set_powerstate(FORCESTATE | POWERSTATE_OFF, PM_GFX_OFFSET); - -#if 0 - /* REVISIT: Internal USB needs special handling */ - force_standby_usb(); - if (cpu_is_omap2430()) - force_hsmmc(); - sdram_self_refresh_on_idle_req(1); -#endif - - /* Enable clock auto control for all domains. - * Note that CORE domain includes also DSS, L4 & L3. - */ - pmdomain_set_clock_autocontrol(AUTOSTAT_MPU, PM_MPU_OFFSET); - pmdomain_set_clock_autocontrol(AUTOSTAT_GFX, PM_GFX_OFFSET); - pmdomain_set_clock_autocontrol(AUTOSTAT_DSS | AUTOSTAT_L4 | AUTOSTAT_L3, - PM_CORE_OFFSET); - if (cpu_is_omap2420()) - pmdomain_set_clock_autocontrol(AUTOSTAT_IVA | AUTOSTAT_DSP, - PM_DSP_OFFSET); - else { - pmdomain_set_clock_autocontrol(AUTOSTAT_DSP, PM_DSP_OFFSET); - pmdomain_set_clock_autocontrol(AUTOSTAT_MDM, PM_MDM_OFFSET); - } - - /* Enable clock autoidle for all domains */ - pmdomain_set_clock_autoidle1(0x2, PM_DSP_OFFSET); - if (cpu_is_omap2420()) { - pmdomain_set_clock_autoidle1(0xfffffff9, PM_CORE_OFFSET); - pmdomain_set_clock_autoidle2(0x7, PM_CORE_OFFSET); - pmdomain_set_clock_autoidle1(0x3f, PM_WKUP_OFFSET); - } else { - pmdomain_set_clock_autoidle1(0xeafffff1, PM_CORE_OFFSET); - pmdomain_set_clock_autoidle2(0xfff, PM_CORE_OFFSET); - pmdomain_set_clock_autoidle1(0x7f, PM_WKUP_OFFSET); - pmdomain_set_clock_autoidle1(0x3, PM_MDM_OFFSET); - } - pmdomain_set_clock_autoidle3(0x7, PM_CORE_OFFSET); - pmdomain_set_clock_autoidle4(0x1f, PM_CORE_OFFSET); -} - -/* - * Initializes power domains by removing wake-up dependencies and powering - * down DSP and GFX. Gets called from PM init. Note that DSP and IVA code - * must re-enable DSP and GFX when used. - */ -void __init pmdomain_init(void) -{ - /* Remove all domain wakeup dependencies */ - pmdomain_set_wakeup_dependencies(EN_WKUP | EN_CORE, PM_MPU_OFFSET); - pmdomain_set_wakeup_dependencies(0, PM_DSP_OFFSET); - pmdomain_set_wakeup_dependencies(0, PM_GFX_OFFSET); - pmdomain_set_wakeup_dependencies(EN_WKUP | EN_MPU, PM_CORE_OFFSET); - if (cpu_is_omap2430()) - pmdomain_set_wakeup_dependencies(0, PM_MDM_OFFSET); - - /* Power down DSP and GFX */ - pmdomain_set_powerstate(POWERSTATE_OFF | FORCESTATE, PM_DSP_OFFSET); - pmdomain_set_powerstate(POWERSTATE_OFF | FORCESTATE, PM_GFX_OFFSET); -} |