aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-sa1100/include/mach/h3600.h
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-sa1100/include/mach/h3600.h')
-rw-r--r--arch/arm/mach-sa1100/include/mach/h3600.h100
1 files changed, 0 insertions, 100 deletions
diff --git a/arch/arm/mach-sa1100/include/mach/h3600.h b/arch/arm/mach-sa1100/include/mach/h3600.h
deleted file mode 100644
index 2827faa..0000000
--- a/arch/arm/mach-sa1100/include/mach/h3600.h
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- *
- * Definitions for H3600 Handheld Computer
- *
- * Copyright 2000 Compaq Computer Corporation.
- *
- * Use consistent with the GNU GPL is permitted,
- * provided that this copyright notice is
- * preserved in its entirety in all copies and derived works.
- *
- * COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
- * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
- * FITNESS FOR ANY PARTICULAR PURPOSE.
- *
- * Author: Jamey Hicks.
- *
- * History:
- *
- * 2001-10-?? Andrew Christian Added support for iPAQ H3800
- *
- */
-
-#ifndef _INCLUDE_H3600_H_
-#define _INCLUDE_H3600_H_
-
-typedef int __bitwise pm_request_t;
-
-#define PM_SUSPEND ((__force pm_request_t) 1) /* enter D1-D3 */
-#define PM_RESUME ((__force pm_request_t) 2) /* enter D0 */
-
-/* generalized support for H3xxx series Compaq Pocket PC's */
-#define machine_is_h3xxx() (machine_is_h3100() || machine_is_h3600())
-
-/* Physical memory regions corresponding to chip selects */
-#define H3600_EGPIO_PHYS (SA1100_CS5_PHYS + 0x01000000)
-#define H3600_BANK_2_PHYS SA1100_CS2_PHYS
-#define H3600_BANK_4_PHYS SA1100_CS4_PHYS
-
-/* Virtual memory regions corresponding to chip selects 2 & 4 (used on sleeves) */
-#define H3600_EGPIO_VIRT 0xf0000000
-#define H3600_BANK_2_VIRT 0xf1000000
-#define H3600_BANK_4_VIRT 0xf3800000
-
-/*
- Machine-independent GPIO definitions
- --- these are common across all current iPAQ platforms
-*/
-
-#define GPIO_H3600_NPOWER_BUTTON GPIO_GPIO (0) /* Also known as the "off button" */
-
-#define GPIO_H3600_PCMCIA_CD1 GPIO_GPIO (10)
-#define GPIO_H3600_PCMCIA_IRQ1 GPIO_GPIO (11)
-
-/* UDA1341 L3 Interface */
-#define GPIO_H3600_L3_DATA GPIO_GPIO (14)
-#define GPIO_H3600_L3_MODE GPIO_GPIO (15)
-#define GPIO_H3600_L3_CLOCK GPIO_GPIO (16)
-
-#define GPIO_H3600_PCMCIA_CD0 GPIO_GPIO (17)
-#define GPIO_H3600_SYS_CLK GPIO_GPIO (19)
-#define GPIO_H3600_PCMCIA_IRQ0 GPIO_GPIO (21)
-
-#define GPIO_H3600_COM_DCD GPIO_GPIO (23)
-#define GPIO_H3600_OPT_IRQ GPIO_GPIO (24)
-#define GPIO_H3600_COM_CTS GPIO_GPIO (25)
-#define GPIO_H3600_COM_RTS GPIO_GPIO (26)
-
-#define IRQ_GPIO_H3600_NPOWER_BUTTON IRQ_GPIO0
-#define IRQ_GPIO_H3600_PCMCIA_CD1 IRQ_GPIO10
-#define IRQ_GPIO_H3600_PCMCIA_IRQ1 IRQ_GPIO11
-#define IRQ_GPIO_H3600_PCMCIA_CD0 IRQ_GPIO17
-#define IRQ_GPIO_H3600_PCMCIA_IRQ0 IRQ_GPIO21
-#define IRQ_GPIO_H3600_COM_DCD IRQ_GPIO23
-#define IRQ_GPIO_H3600_OPT_IRQ IRQ_GPIO24
-#define IRQ_GPIO_H3600_COM_CTS IRQ_GPIO25
-
-
-#ifndef __ASSEMBLY__
-
-enum ipaq_egpio_type {
- IPAQ_EGPIO_LCD_POWER, /* Power to the LCD panel */
- IPAQ_EGPIO_CODEC_NRESET, /* Clear to reset the audio codec (remember to return high) */
- IPAQ_EGPIO_AUDIO_ON, /* Audio power */
- IPAQ_EGPIO_QMUTE, /* Audio muting */
- IPAQ_EGPIO_OPT_NVRAM_ON, /* Non-volatile RAM on extension sleeves (SPI interface) */
- IPAQ_EGPIO_OPT_ON, /* Power to extension sleeves */
- IPAQ_EGPIO_CARD_RESET, /* Reset PCMCIA cards on extension sleeve (???) */
- IPAQ_EGPIO_OPT_RESET, /* Reset option pack (???) */
- IPAQ_EGPIO_IR_ON, /* IR sensor/emitter power */
- IPAQ_EGPIO_IR_FSEL, /* IR speed selection 1->fast, 0->slow */
- IPAQ_EGPIO_RS232_ON, /* Maxim RS232 chip power */
- IPAQ_EGPIO_VPP_ON, /* Turn on power to flash programming */
- IPAQ_EGPIO_LCD_ENABLE, /* Enable/disable LCD controller */
-};
-
-extern void (*assign_h3600_egpio)(enum ipaq_egpio_type x, int level);
-
-#endif /* ASSEMBLY */
-
-#endif /* _INCLUDE_H3600_H_ */