diff options
Diffstat (limited to 'arch/arm/mach-versatile/pci.c')
-rw-r--r-- | arch/arm/mach-versatile/pci.c | 93 |
1 files changed, 48 insertions, 45 deletions
diff --git a/arch/arm/mach-versatile/pci.c b/arch/arm/mach-versatile/pci.c index b80d57d..722fbab 100644 --- a/arch/arm/mach-versatile/pci.c +++ b/arch/arm/mach-versatile/pci.c @@ -240,6 +240,14 @@ int __init pci_versatile_setup(int nr, struct pci_sys_data *sys) int i; int myslot = -1; unsigned long val; + void __iomem *local_pci_cfg_base; + + val = __raw_readl(SYS_PCICTL); + if (!(val & 1)) { + printk("Not plugged into PCI backplane!\n"); + ret = -EIO; + goto out; + } if (nr == 0) { sys->mem_offset = 0; @@ -253,48 +261,45 @@ int __init pci_versatile_setup(int nr, struct pci_sys_data *sys) goto out; } - __raw_writel(VERSATILE_PCI_MEM_BASE0 >> 28,PCI_IMAP0); - __raw_writel(VERSATILE_PCI_MEM_BASE1 >> 28,PCI_IMAP1); - __raw_writel(VERSATILE_PCI_MEM_BASE2 >> 28,PCI_IMAP2); - - __raw_writel(1, SYS_PCICTL); - - val = __raw_readl(SYS_PCICTL); - if (!(val & 1)) { - printk("Not plugged into PCI backplane!\n"); - ret = -EIO; - goto out; - } - /* * We need to discover the PCI core first to configure itself * before the main PCI probing is performed */ - for (i=0; i<32; i++) { + for (i=0; i<32; i++) if ((__raw_readl(VERSATILE_PCI_VIRT_BASE+(i<<11)+DEVICE_ID_OFFSET) == VP_PCI_DEVICE_ID) && (__raw_readl(VERSATILE_PCI_VIRT_BASE+(i<<11)+CLASS_ID_OFFSET) == VP_PCI_CLASS_ID)) { myslot = i; - - __raw_writel(myslot, PCI_SELFID); - val = __raw_readl(VERSATILE_PCI_CFG_VIRT_BASE+(myslot<<11)+CSR_OFFSET); - val |= (1<<2); - __raw_writel(val, VERSATILE_PCI_CFG_VIRT_BASE+(myslot<<11)+CSR_OFFSET); break; } - } if (myslot == -1) { printk("Cannot find PCI core!\n"); ret = -EIO; - } else { - printk("PCI core found (slot %d)\n",myslot); - /* Do not to map Versatile FPGA PCI device - into memory space as we are short of - mappable memory */ - pci_slot_ignore |= (1 << myslot); - ret = 1; + goto out; } + printk("PCI core found (slot %d)\n",myslot); + + __raw_writel(myslot, PCI_SELFID); + local_pci_cfg_base = (void *) VERSATILE_PCI_CFG_VIRT_BASE + (myslot << 11); + + val = __raw_readl(local_pci_cfg_base + CSR_OFFSET); + val |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE; + __raw_writel(val, local_pci_cfg_base + CSR_OFFSET); + + /* + * Configure the PCI inbound memory windows to be 1:1 mapped to SDRAM + */ + __raw_writel(PHYS_OFFSET, local_pci_cfg_base + PCI_BASE_ADDRESS_0); + __raw_writel(PHYS_OFFSET, local_pci_cfg_base + PCI_BASE_ADDRESS_1); + __raw_writel(PHYS_OFFSET, local_pci_cfg_base + PCI_BASE_ADDRESS_2); + + /* + * Do not to map Versatile FPGA PCI device into memory space + */ + pci_slot_ignore |= (1 << myslot); + ret = 1; + out: return ret; } @@ -305,18 +310,18 @@ struct pci_bus *pci_versatile_scan_bus(int nr, struct pci_sys_data *sys) return pci_scan_bus(sys->busnr, &pci_versatile_ops, sys); } -/* - * V3_LB_BASE? - local bus address - * V3_LB_MAP? - pci bus address - */ void __init pci_versatile_preinit(void) { -} + __raw_writel(VERSATILE_PCI_MEM_BASE0 >> 28, PCI_IMAP0); + __raw_writel(VERSATILE_PCI_MEM_BASE1 >> 28, PCI_IMAP1); + __raw_writel(VERSATILE_PCI_MEM_BASE2 >> 28, PCI_IMAP2); -void __init pci_versatile_postinit(void) -{ -} + __raw_writel(PHYS_OFFSET >> 28, PCI_SMAP0); + __raw_writel(PHYS_OFFSET >> 28, PCI_SMAP1); + __raw_writel(PHYS_OFFSET >> 28, PCI_SMAP2); + __raw_writel(1, SYS_PCICTL); +} /* * map the specified device/slot/pin to an IRQ. Different backplanes may need to modify this. @@ -326,16 +331,15 @@ static int __init versatile_map_irq(struct pci_dev *dev, u8 slot, u8 pin) int irq; int devslot = PCI_SLOT(dev->devfn); - /* slot, pin, irq - 24 1 27 - 25 1 28 untested - 26 1 29 - 27 1 30 untested - */ - - irq = 27 + ((slot + pin + 2) % 3); /* Fudged */ + /* slot, pin, irq + * 24 1 27 + * 25 1 28 + * 26 1 29 + * 27 1 30 + */ + irq = 27 + ((slot + pin - 1) & 3); - printk("map irq: slot %d, pin %d, devslot %d, irq: %d\n",slot,pin,devslot,irq); + printk("PCI map irq: slot %d, pin %d, devslot %d, irq: %d\n",slot,pin,devslot,irq); return irq; } @@ -347,7 +351,6 @@ static struct hw_pci versatile_pci __initdata = { .setup = pci_versatile_setup, .scan = pci_versatile_scan_bus, .preinit = pci_versatile_preinit, - .postinit = pci_versatile_postinit, }; static int __init versatile_pci_init(void) |