diff options
Diffstat (limited to 'arch/arm/plat-omap/clock.c')
-rw-r--r-- | arch/arm/plat-omap/clock.c | 39 |
1 files changed, 27 insertions, 12 deletions
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c index 59d91b3..52a58b2 100644 --- a/arch/arm/plat-omap/clock.c +++ b/arch/arm/plat-omap/clock.c @@ -21,6 +21,7 @@ #include <asm/arch/usb.h> #include "clock.h" +#include "sram.h" static LIST_HEAD(clocks); static DECLARE_MUTEX(clocks_sem); @@ -141,7 +142,7 @@ static struct clk arm_ck = { static struct clk armper_ck = { .name = "armper_ck", .parent = &ck_dpll1, - .flags = CLOCK_IN_OMAP730 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | + .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | RATE_CKCTL, .enable_reg = ARM_IDLECT2, .enable_bit = EN_PERCK, @@ -385,7 +386,8 @@ static struct clk uart2_ck = { .name = "uart2_ck", /* Direct from ULPD, no parent */ .rate = 12000000, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | ENABLE_REG_32BIT, + .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | ENABLE_REG_32BIT | + ALWAYS_ENABLED, .enable_reg = MOD_CONF_CTRL_0, .enable_bit = 30, /* Chooses between 12MHz and 48MHz */ .set_rate = &set_uart_rate, @@ -443,6 +445,15 @@ static struct clk usb_hhc_ck16xx = { .enable_bit = 8 /* UHOST_EN */, }; +static struct clk usb_dc_ck = { + .name = "usb_dc_ck", + /* Direct from ULPD, no parent */ + .rate = 48000000, + .flags = CLOCK_IN_OMAP16XX | RATE_FIXED, + .enable_reg = SOFT_REQ_REG, + .enable_bit = 4, +}; + static struct clk mclk_1510 = { .name = "mclk", /* Direct from ULPD, no parent. May be enabled by ext hardware. */ @@ -552,6 +563,7 @@ static struct clk * onchip_clks[] = { &uart3_16xx, &usb_clko, &usb_hhc_ck1510, &usb_hhc_ck16xx, + &usb_dc_ck, &mclk_1510, &mclk_16xx, &bclk_1510, &bclk_16xx, &mmc1_ck, @@ -946,14 +958,13 @@ static int select_table_rate(struct clk * clk, unsigned long rate) if (!ptr->rate) return -EINVAL; - if (!ptr->rate) - return -EINVAL; + /* + * In most cases we should not need to reprogram DPLL. + * Reprogramming the DPLL is tricky, it must be done from SRAM. + */ + omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val); - if (unlikely(ck_dpll1.rate == 0)) { - omap_writew(ptr->dpllctl_val, DPLL_CTL); - ck_dpll1.rate = ptr->pll_rate; - } - omap_writew(ptr->ckctl_val, ARM_CKCTL); + ck_dpll1.rate = ptr->pll_rate; propagate_rate(&ck_dpll1); return 0; } @@ -1224,9 +1235,11 @@ int __init clk_init(void) #endif /* Cache rates for clocks connected to ck_ref (not dpll1) */ propagate_rate(&ck_ref); - printk(KERN_INFO "Clocking rate (xtal/DPLL1/MPU): %ld.%01ld/%ld/%ld MHz\n", + printk(KERN_INFO "Clocking rate (xtal/DPLL1/MPU): " + "%ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n", ck_ref.rate / 1000000, (ck_ref.rate / 100000) % 10, - ck_dpll1.rate, arm_ck.rate); + ck_dpll1.rate / 1000000, (ck_dpll1.rate / 100000) % 10, + arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10); #ifdef CONFIG_MACH_OMAP_PERSEUS2 /* Select slicer output as OMAP input clock */ @@ -1271,7 +1284,9 @@ static int __init omap_late_clk_reset(void) struct clk *p; __u32 regval32; - omap_writew(0, SOFT_REQ_REG); + /* USB_REQ_EN will be disabled later if necessary (usb_dc_ck) */ + regval32 = omap_readw(SOFT_REQ_REG) & (1 << 4); + omap_writew(regval32, SOFT_REQ_REG); omap_writew(0, SOFT_REQ_REG2); list_for_each_entry(p, &clocks, node) { |