1 files changed, 358 insertions, 0 deletions
diff --git a/arch/powerpc/kernel/pci_of_scan.c b/arch/powerpc/kernel/pci_of_scan.c
new file mode 100644
index 0000000..72c31bc
--- /dev/null
+++ b/arch/powerpc/kernel/pci_of_scan.c
@@ -0,0 +1,358 @@
+/*
+ * Helper routines to scan the device tree for PCI devices and busses
+ *
+ * Migrated out of PowerPC architecture pci_64.c file by Grant Likely
+ * <grant.likely@secretlab.ca> so that these routines are available for
+ * 32 bit also.
+ *
+ * Copyright (C) 2003 Anton Blanchard <anton@au.ibm.com>, IBM
+ *   Rework, based on alpha PCI code.
+ * Copyright (c) 2009 Secret Lab Technologies Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ */
+
+#include <linux/pci.h>
+#include <asm/pci-bridge.h>
+#include <asm/prom.h>
+
+/**
+ * get_int_prop - Decode a u32 from a device tree property
+ */
+static u32 get_int_prop(struct device_node *np, const char *name, u32 def)
+{
+	const u32 *prop;
+	int len;
+
+	prop = of_get_property(np, name, &len);
+	if (prop && len >= 4)
+		return *prop;
+	return def;
+}
+
+/**
+ * pci_parse_of_flags - Parse the flags cell of a device tree PCI address
+ * @addr0: value of 1st cell of a device tree PCI address.
+ * @bridge: Set this flag if the address is from a bridge 'ranges' property
+ */
+unsigned int pci_parse_of_flags(u32 addr0, int bridge)
+{
+	unsigned int flags = 0;
+
+	if (addr0 & 0x02000000) {
+		flags = IORESOURCE_MEM | PCI_BASE_ADDRESS_SPACE_MEMORY;
+		flags |= (addr0 >> 22) & PCI_BASE_ADDRESS_MEM_TYPE_64;
+		flags |= (addr0 >> 28) & PCI_BASE_ADDRESS_MEM_TYPE_1M;
+		if (addr0 & 0x40000000)
+			flags |= IORESOURCE_PREFETCH
+				 | PCI_BASE_ADDRESS_MEM_PREFETCH;
+		/* Note: We don't know whether the ROM has been left enabled
+		 * by the firmware or not. We mark it as disabled (ie, we do
+		 * not set the IORESOURCE_ROM_ENABLE flag) for now rather than
+		 * do a config space read, it will be force-enabled if needed
+		 */
+		if (!bridge && (addr0 & 0xff) == 0x30)
+			flags |= IORESOURCE_READONLY;
+	} else if (addr0 & 0x01000000)
+		flags = IORESOURCE_IO | PCI_BASE_ADDRESS_SPACE_IO;
+	if (flags)
+		flags |= IORESOURCE_SIZEALIGN;
+	return flags;
+}
+
+/**
+ * of_pci_parse_addrs - Parse PCI addresses assigned in the device tree node
+ * @node: device tree node for the PCI device
+ * @dev: pci_dev structure for the device
+ *
+ * This function parses the 'assigned-addresses' property of a PCI devices'
+ * device tree node and writes them into the associated pci_dev structure.
+ */
+static void of_pci_parse_addrs(struct device_node *node, struct pci_dev *dev)
+{
+	u64 base, size;
+	unsigned int flags;
+	struct resource *res;
+	const u32 *addrs;
+	u32 i;
+	int proplen;
+
+	addrs = of_get_property(node, "assigned-addresses", &proplen);
+	if (!addrs)
+		return;
+	pr_debug("    parse addresses (%d bytes) @ %p\n", proplen, addrs);
+	for (; proplen >= 20; proplen -= 20, addrs += 5) {
+		flags = pci_parse_of_flags(addrs[0], 0);
+		if (!flags)
+			continue;
+		base = of_read_number(&addrs[1], 2);
+		size = of_read_number(&addrs[3], 2);
+		if (!size)
+			continue;
+		i = addrs[0] & 0xff;
+		pr_debug("  base: %llx, size: %llx, i: %x\n",
+			 (unsigned long long)base,
+			 (unsigned long long)size, i);
+
+		if (PCI_BASE_ADDRESS_0 <= i && i <= PCI_BASE_ADDRESS_5) {
+			res = &dev->resource[(i - PCI_BASE_ADDRESS_0) >> 2];
+		} else if (i == dev->rom_base_reg) {
+			res = &dev->resource[PCI_ROM_RESOURCE];
+			flags |= IORESOURCE_READONLY | IORESOURCE_CACHEABLE;
+		} else {
+			printk(KERN_ERR "PCI: bad cfg reg num 0x%x\n", i);
+			continue;
+		}
+		res->start = base;
+		res->end = base + size - 1;
+		res->flags = flags;
+		res->name = pci_name(dev);
+	}
+}
+
+/**
+ * of_create_pci_dev - Given a device tree node on a pci bus, create a pci_dev
+ * @node: device tree node pointer
+ * @bus: bus the device is sitting on
+ * @devfn: PCI function number, extracted from device tree by caller.
+ */
+struct pci_dev *of_create_pci_dev(struct device_node *node,
+				 struct pci_bus *bus, int devfn)
+{
+	struct pci_dev *dev;
+	const char *type;
+
+	dev = alloc_pci_dev();
+	if (!dev)
+		return NULL;
+	type = of_get_property(node, "device_type", NULL);
+	if (type == NULL)
+		type = "";
+
+	pr_debug("    create device, devfn: %x, type: %s\n", devfn, type);
+
+	dev->bus = bus;
+	dev->sysdata = node;
+	dev->dev.parent = bus->bridge;
+	dev->dev.bus = &pci_bus_type;
+	dev->devfn = devfn;
+	dev->multifunction = 0;		/* maybe a lie? */
+
+	dev->vendor = get_int_prop(node, "vendor-id", 0xffff);
+	dev->device = get_int_prop(node, "device-id", 0xffff);
+	dev->subsystem_vendor = get_int_prop(node, "subsystem-vendor-id", 0);
+	dev->subsystem_device = get_int_prop(node, "subsystem-id", 0);
+
+	dev->cfg_size = pci_cfg_space_size(dev);
+
+	dev_set_name(&dev->dev, "%04x:%02x:%02x.%d", pci_domain_nr(bus),
+		dev->bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn));
+	dev->class = get_int_prop(node, "class-code", 0);
+	dev->revision = get_int_prop(node, "revision-id", 0);
+
+	pr_debug("    class: 0x%x\n", dev->class);
+	pr_debug("    revision: 0x%x\n", dev->revision);
+
+	dev->current_state = 4;		/* unknown power state */
+	dev->error_state = pci_channel_io_normal;
+	dev->dma_mask = 0xffffffff;
+
+	if (!strcmp(type, "pci") || !strcmp(type, "pciex")) {
+		/* a PCI-PCI bridge */
+		dev->hdr_type = PCI_HEADER_TYPE_BRIDGE;
+		dev->rom_base_reg = PCI_ROM_ADDRESS1;
+	} else if (!strcmp(type, "cardbus")) {
+		dev->hdr_type = PCI_HEADER_TYPE_CARDBUS;
+	} else {
+		dev->hdr_type = PCI_HEADER_TYPE_NORMAL;
+		dev->rom_base_reg = PCI_ROM_ADDRESS;
+		/* Maybe do a default OF mapping here */
+		dev->irq = NO_IRQ;
+	}
+
+	of_pci_parse_addrs(node, dev);
+
+	pr_debug("    adding to system ...\n");
+
+	pci_device_add(dev, bus);
+
+	return dev;
+}
+EXPORT_SYMBOL(of_create_pci_dev);
+
+/**
+ * of_scan_pci_bridge - Set up a PCI bridge and scan for child nodes
+ * @node: device tree node of bridge
+ * @dev: pci_dev structure for the bridge
+ *
+ * of_scan_bus() calls this routine for each PCI bridge that it finds, and
+ * this routine in turn call of_scan_bus() recusively to scan for more child
+ * devices.
+ */
+void __devinit of_scan_pci_bridge(struct device_node *node,
+				  struct pci_dev *dev)
+{
+	struct pci_bus *bus;
+	const u32 *busrange, *ranges;
+	int len, i, mode;
+	struct resource *res;
+	unsigned int flags;
+	u64 size;
+
+	pr_debug("of_scan_pci_bridge(%s)\n", node->full_name);
+
+	/* parse bus-range property */
+	busrange = of_get_property(node, "bus-range", &len);
+	if (busrange == NULL || len != 8) {
+		printk(KERN_DEBUG "Can't get bus-range for PCI-PCI bridge %s\n",
+		       node->full_name);
+		return;
+	}
+	ranges = of_get_property(node, "ranges", &len);
+	if (ranges == NULL) {
+		printk(KERN_DEBUG "Can't get ranges for PCI-PCI bridge %s\n",
+		       node->full_name);
+		return;
+	}
+
+	bus = pci_add_new_bus(dev->bus, dev, busrange[0]);
+	if (!bus) {
+		printk(KERN_ERR "Failed to create pci bus for %s\n",
+		       node->full_name);
+		return;
+	}
+
+	bus->primary = dev->bus->number;
+	bus->subordinate = busrange[1];
+	bus->bridge_ctl = 0;
+	bus->sysdata = node;
+
+	/* parse ranges property */
+	/* PCI #address-cells == 3 and #size-cells == 2 always */
+	res = &dev->resource[PCI_BRIDGE_RESOURCES];
+	for (i = 0; i < PCI_NUM_RESOURCES - PCI_BRIDGE_RESOURCES; ++i) {
+		res->flags = 0;
+		bus->resource[i] = res;
+		++res;
+	}
+	i = 1;
+	for (; len >= 32; len -= 32, ranges += 8) {
+		flags = pci_parse_of_flags(ranges[0], 1);
+		size = of_read_number(&ranges[6], 2);
+		if (flags == 0 || size == 0)
+			continue;
+		if (flags & IORESOURCE_IO) {
+			res = bus->resource[0];
+			if (res->flags) {
+				printk(KERN_ERR "PCI: ignoring extra I/O range"
+				       " for bridge %s\n", node->full_name);
+				continue;
+			}
+		} else {
+			if (i >= PCI_NUM_RESOURCES - PCI_BRIDGE_RESOURCES) {
+				printk(KERN_ERR "PCI: too many memory ranges"
+				       " for bridge %s\n", node->full_name);
+				continue;
+			}
+			res = bus->resource[i];
+			++i;
+		}
+		res->start = of_read_number(&ranges[1], 2);
+		res->end = res->start + size - 1;
+		res->flags = flags;
+	}
+	sprintf(bus->name, "PCI Bus %04x:%02x", pci_domain_nr(bus),
+		bus->number);
+	pr_debug("    bus name: %s\n", bus->name);
+
+	mode = PCI_PROBE_NORMAL;
+	if (ppc_md.pci_probe_mode)
+		mode = ppc_md.pci_probe_mode(bus);
+	pr_debug("    probe mode: %d\n", mode);
+
+	if (mode == PCI_PROBE_DEVTREE)
+		of_scan_bus(node, bus);
+	else if (mode == PCI_PROBE_NORMAL)
+		pci_scan_child_bus(bus);
+}
+EXPORT_SYMBOL(of_scan_pci_bridge);
+
+/**
+ * __of_scan_bus - given a PCI bus node, setup bus and scan for child devices
+ * @node: device tree node for the PCI bus
+ * @bus: pci_bus structure for the PCI bus
+ * @rescan_existing: Flag indicating bus has already been set up
+ */
+static void __devinit __of_scan_bus(struct device_node *node,
+				    struct pci_bus *bus, int rescan_existing)
+{
+	struct device_node *child;
+	const u32 *reg;
+	int reglen, devfn;
+	struct pci_dev *dev;
+
+	pr_debug("of_scan_bus(%s) bus no %d... \n",
+		 node->full_name, bus->number);
+
+	/* Scan direct children */
+	for_each_child_of_node(node, child) {
+		pr_debug("  * %s\n", child->full_name);
+		reg = of_get_property(child, "reg", &reglen);
+		if (reg == NULL || reglen < 20)
+			continue;
+		devfn = (reg[0] >> 8) & 0xff;
+
+		/* create a new pci_dev for this device */
+		dev = of_create_pci_dev(child, bus, devfn);
+		if (!dev)
+			continue;
+		pr_debug("    dev header type: %x\n", dev->hdr_type);
+	}
+
+	/* Apply all fixups necessary. We don't fixup the bus "self"
+	 * for an existing bridge that is being rescanned
+	 */
+	if (!rescan_existing)
+		pcibios_setup_bus_self(bus);
+	pcibios_setup_bus_devices(bus);
+
+	/* Now scan child busses */
+	list_for_each_entry(dev, &bus->devices, bus_list) {
+		if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE ||
+		    dev->hdr_type == PCI_HEADER_TYPE_CARDBUS) {
+			struct device_node *child = pci_device_to_OF_node(dev);
+			if (dev)
+				of_scan_pci_bridge(child, dev);
+		}
+	}
+}
+
+/**
+ * of_scan_bus - given a PCI bus node, setup bus and scan for child devices
+ * @node: device tree node for the PCI bus
+ * @bus: pci_bus structure for the PCI bus
+ */
+void __devinit of_scan_bus(struct device_node *node,
+			   struct pci_bus *bus)
+{
+	__of_scan_bus(node, bus, 0);
+}
+EXPORT_SYMBOL_GPL(of_scan_bus);
+
+/**
+ * of_rescan_bus - given a PCI bus node, scan for child devices
+ * @node: device tree node for the PCI bus
+ * @bus: pci_bus structure for the PCI bus
+ *
+ * Same as of_scan_bus, but for a pci_bus structure that has already been
+ * setup.
+ */
+void __devinit of_rescan_bus(struct device_node *node,
+			     struct pci_bus *bus)
+{
+	__of_scan_bus(node, bus, 1);
+}
+EXPORT_SYMBOL_GPL(of_rescan_bus);
+