diff options
Diffstat (limited to 'arch')
| -rw-r--r-- | arch/powerpc/platforms/Kconfig | 1 | ||||
| -rw-r--r-- | arch/powerpc/sysdev/qe_lib/qe.c | 247 |
2 files changed, 248 insertions, 0 deletions
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig index ea22cad..18f101b 100644 --- a/arch/powerpc/platforms/Kconfig +++ b/arch/powerpc/platforms/Kconfig @@ -265,6 +265,7 @@ config TAU_AVERAGE config QUICC_ENGINE bool select PPC_LIB_RHEAP + select CRC32 help The QUICC Engine (QE) is a new generation of communications coprocessors on Freescale embedded CPUs (akin to CPM in older chips). diff --git a/arch/powerpc/sysdev/qe_lib/qe.c b/arch/powerpc/sysdev/qe_lib/qe.c index 21e0106..3925eae 100644 --- a/arch/powerpc/sysdev/qe_lib/qe.c +++ b/arch/powerpc/sysdev/qe_lib/qe.c @@ -25,6 +25,7 @@ #include <linux/module.h> #include <linux/delay.h> #include <linux/ioport.h> +#include <linux/crc32.h> #include <asm/irq.h> #include <asm/page.h> #include <asm/pgtable.h> @@ -394,3 +395,249 @@ void *qe_muram_addr(unsigned long offset) return (void *)&qe_immr->muram[offset]; } EXPORT_SYMBOL(qe_muram_addr); + +/* The maximum number of RISCs we support */ +#define MAX_QE_RISC 2 + +/* Firmware information stored here for qe_get_firmware_info() */ +static struct qe_firmware_info qe_firmware_info; + +/* + * Set to 1 if QE firmware has been uploaded, and therefore + * qe_firmware_info contains valid data. + */ +static int qe_firmware_uploaded; + +/* + * Upload a QE microcode + * + * This function is a worker function for qe_upload_firmware(). It does + * the actual uploading of the microcode. + */ +static void qe_upload_microcode(const void *base, + const struct qe_microcode *ucode) +{ + const __be32 *code = base + be32_to_cpu(ucode->code_offset); + unsigned int i; + + if (ucode->major || ucode->minor || ucode->revision) + printk(KERN_INFO "qe-firmware: " + "uploading microcode '%s' version %u.%u.%u\n", + ucode->id, ucode->major, ucode->minor, ucode->revision); + else + printk(KERN_INFO "qe-firmware: " + "uploading microcode '%s'\n", ucode->id); + + /* Use auto-increment */ + out_be32(&qe_immr->iram.iadd, be32_to_cpu(ucode->iram_offset) | + QE_IRAM_IADD_AIE | QE_IRAM_IADD_BADDR); + + for (i = 0; i < be32_to_cpu(ucode->count); i++) + out_be32(&qe_immr->iram.idata, be32_to_cpu(code[i])); +} + +/* + * Upload a microcode to the I-RAM at a specific address. + * + * See Documentation/powerpc/qe-firmware.txt for information on QE microcode + * uploading. + * + * Currently, only version 1 is supported, so the 'version' field must be + * set to 1. + * + * The SOC model and revision are not validated, they are only displayed for + * informational purposes. + * + * 'calc_size' is the calculated size, in bytes, of the firmware structure and + * all of the microcode structures, minus the CRC. + * + * 'length' is the size that the structure says it is, including the CRC. + */ +int qe_upload_firmware(const struct qe_firmware *firmware) +{ + unsigned int i; + unsigned int j; + u32 crc; + size_t calc_size = sizeof(struct qe_firmware); + size_t length; + const struct qe_header *hdr; + + if (!firmware) { + printk(KERN_ERR "qe-firmware: invalid pointer\n"); + return -EINVAL; + } + + hdr = &firmware->header; + length = be32_to_cpu(hdr->length); + + /* Check the magic */ + if ((hdr->magic[0] != 'Q') || (hdr->magic[1] != 'E') || + (hdr->magic[2] != 'F')) { + printk(KERN_ERR "qe-firmware: not a microcode\n"); + return -EPERM; + } + + /* Check the version */ + if (hdr->version != 1) { + printk(KERN_ERR "qe-firmware: unsupported version\n"); + return -EPERM; + } + + /* Validate some of the fields */ + if ((firmware->count < 1) || (firmware->count >= MAX_QE_RISC)) { + printk(KERN_ERR "qe-firmware: invalid data\n"); + return -EINVAL; + } + + /* Validate the length and check if there's a CRC */ + calc_size += (firmware->count - 1) * sizeof(struct qe_microcode); + + for (i = 0; i < firmware->count; i++) + /* + * For situations where the second RISC uses the same microcode + * as the first, the 'code_offset' and 'count' fields will be + * zero, so it's okay to add those. + */ + calc_size += sizeof(__be32) * + be32_to_cpu(firmware->microcode[i].count); + + /* Validate the length */ + if (length != calc_size + sizeof(__be32)) { + printk(KERN_ERR "qe-firmware: invalid length\n"); + return -EPERM; + } + + /* Validate the CRC */ + crc = be32_to_cpu(*(__be32 *)((void *)firmware + calc_size)); + if (crc != crc32(0, firmware, calc_size)) { + printk(KERN_ERR "qe-firmware: firmware CRC is invalid\n"); + return -EIO; + } + + /* + * If the microcode calls for it, split the I-RAM. + */ + if (!firmware->split) + setbits16(&qe_immr->cp.cercr, QE_CP_CERCR_CIR); + + if (firmware->soc.model) + printk(KERN_INFO + "qe-firmware: firmware '%s' for %u V%u.%u\n", + firmware->id, be16_to_cpu(firmware->soc.model), + firmware->soc.major, firmware->soc.minor); + else + printk(KERN_INFO "qe-firmware: firmware '%s'\n", + firmware->id); + + /* + * The QE only supports one microcode per RISC, so clear out all the + * saved microcode information and put in the new. + */ + memset(&qe_firmware_info, 0, sizeof(qe_firmware_info)); + strcpy(qe_firmware_info.id, firmware->id); + qe_firmware_info.extended_modes = firmware->extended_modes; + memcpy(qe_firmware_info.vtraps, firmware->vtraps, + sizeof(firmware->vtraps)); + + /* Loop through each microcode. */ + for (i = 0; i < firmware->count; i++) { + const struct qe_microcode *ucode = &firmware->microcode[i]; + + /* Upload a microcode if it's present */ + if (ucode->code_offset) + qe_upload_microcode(firmware, ucode); + + /* Program the traps for this processor */ + for (j = 0; j < 16; j++) { + u32 trap = be32_to_cpu(ucode->traps[j]); + + if (trap) + out_be32(&qe_immr->rsp[i].tibcr[j], trap); + } + + /* Enable traps */ + out_be32(&qe_immr->rsp[i].eccr, be32_to_cpu(ucode->eccr)); + } + + qe_firmware_uploaded = 1; + + return 0; +} +EXPORT_SYMBOL(qe_upload_firmware); + +/* + * Get info on the currently-loaded firmware + * + * This function also checks the device tree to see if the boot loader has + * uploaded a firmware already. + */ +struct qe_firmware_info *qe_get_firmware_info(void) +{ + static int initialized; + struct property *prop; + struct device_node *qe; + struct device_node *fw = NULL; + const char *sprop; + unsigned int i; + + /* + * If we haven't checked yet, and a driver hasn't uploaded a firmware + * yet, then check the device tree for information. + */ + if (initialized || qe_firmware_uploaded) + return NULL; + + initialized = 1; + + /* + * Newer device trees have an "fsl,qe" compatible property for the QE + * node, but we still need to support older device trees. + */ + qe = of_find_compatible_node(NULL, NULL, "fsl,qe"); + if (!qe) { + qe = of_find_node_by_type(NULL, "qe"); + if (!qe) + return NULL; + } + + /* Find the 'firmware' child node */ + for_each_child_of_node(qe, fw) { + if (strcmp(fw->name, "firmware") == 0) + break; + } + + of_node_put(qe); + + /* Did we find the 'firmware' node? */ + if (!fw) + return NULL; + + qe_firmware_uploaded = 1; + + /* Copy the data into qe_firmware_info*/ + sprop = of_get_property(fw, "id", NULL); + if (sprop) + strncpy(qe_firmware_info.id, sprop, + sizeof(qe_firmware_info.id) - 1); + + prop = of_find_property(fw, "extended-modes", NULL); + if (prop && (prop->length == sizeof(u64))) { + const u64 *iprop = prop->value; + + qe_firmware_info.extended_modes = *iprop; + } + + prop = of_find_property(fw, "virtual-traps", NULL); + if (prop && (prop->length == 32)) { + const u32 *iprop = prop->value; + + for (i = 0; i < ARRAY_SIZE(qe_firmware_info.vtraps); i++) + qe_firmware_info.vtraps[i] = iprop[i]; + } + + of_node_put(fw); + + return &qe_firmware_info; +} +EXPORT_SYMBOL(qe_get_firmware_info); + |