1 files changed, 98 insertions, 53 deletions

diff --git a/drivers/block/cciss_scsi.c b/drivers/block/cciss_scsi.c
index e1233aa..a3fd87b 100644
--- a/drivers/block/cciss_scsi.c
+++ b/drivers/block/cciss_scsi.c
@@ -365,7 +365,7 @@ struct scsi2map {
 
 static int 
 cciss_scsi_add_entry(int ctlr, int hostno, 
-		unsigned char *scsi3addr, int devtype,
+		struct cciss_scsi_dev_t *device,
 		struct scsi2map *added, int *nadded)
 {
 	/* assumes hba[ctlr]->scsi_ctlr->lock is held */ 
@@ -384,12 +384,12 @@ cciss_scsi_add_entry(int ctlr, int hostno,
 	lun = 0;
 	/* Is this device a non-zero lun of a multi-lun device */
 	/* byte 4 of the 8-byte LUN addr will contain the logical unit no. */
-	if (scsi3addr[4] != 0) {
+	if (device->scsi3addr[4] != 0) {
 		/* Search through our list and find the device which */
 		/* has the same 8 byte LUN address, excepting byte 4. */
 		/* Assign the same bus and target for this new LUN. */
 		/* Use the logical unit number from the firmware. */
-		memcpy(addr1, scsi3addr, 8);
+		memcpy(addr1, device->scsi3addr, 8);
 		addr1[4] = 0;
 		for (i = 0; i < n; i++) {
 			sd = &ccissscsi[ctlr].dev[i];
@@ -399,7 +399,7 @@ cciss_scsi_add_entry(int ctlr, int hostno,
 			if (memcmp(addr1, addr2, 8) == 0) {
 				bus = sd->bus;
 				target = sd->target;
-				lun = scsi3addr[4];
+				lun = device->scsi3addr[4];
 				break;
 			}
 		}
@@ -420,8 +420,12 @@ cciss_scsi_add_entry(int ctlr, int hostno,
 	added[*nadded].lun = sd->lun;
 	(*nadded)++;
 
-	memcpy(&sd->scsi3addr[0], scsi3addr, 8);
-	sd->devtype = devtype;
+	memcpy(sd->scsi3addr, device->scsi3addr, 8);
+	memcpy(sd->vendor, device->vendor, sizeof(sd->vendor));
+	memcpy(sd->revision, device->revision, sizeof(sd->revision));
+	memcpy(sd->device_id, device->device_id, sizeof(sd->device_id));
+	sd->devtype = device->devtype;
+
 	ccissscsi[ctlr].ndevices++;
 
 	/* initially, (before registering with scsi layer) we don't 
@@ -487,6 +491,22 @@ static void fixup_botched_add(int ctlr, char *scsi3addr)
 	CPQ_TAPE_UNLOCK(ctlr, flags);
 }
 
+static int device_is_the_same(struct cciss_scsi_dev_t *dev1,
+	struct cciss_scsi_dev_t *dev2)
+{
+	return dev1->devtype == dev2->devtype &&
+		memcmp(dev1->scsi3addr, dev2->scsi3addr,
+			sizeof(dev1->scsi3addr)) == 0 &&
+		memcmp(dev1->device_id, dev2->device_id,
+			sizeof(dev1->device_id)) == 0 &&
+		memcmp(dev1->vendor, dev2->vendor,
+			sizeof(dev1->vendor)) == 0 &&
+		memcmp(dev1->model, dev2->model,
+			sizeof(dev1->model)) == 0 &&
+		memcmp(dev1->revision, dev2->revision,
+			sizeof(dev1->revision)) == 0;
+}
+
 static int
 adjust_cciss_scsi_table(int ctlr, int hostno,
 	struct cciss_scsi_dev_t sd[], int nsds)
@@ -532,7 +552,7 @@ adjust_cciss_scsi_table(int ctlr, int hostno,
 		for (j=0;j<nsds;j++) {
 			if (SCSI3ADDR_EQ(sd[j].scsi3addr,
 				csd->scsi3addr)) {
-				if (sd[j].devtype == csd->devtype)
+				if (device_is_the_same(&sd[j], csd))
 					found=2;
 				else
 					found=1;
@@ -548,22 +568,26 @@ adjust_cciss_scsi_table(int ctlr, int hostno,
 			cciss_scsi_remove_entry(ctlr, hostno, i,
 				removed, &nremoved);
 			/* remove ^^^, hence i not incremented */
-		} 
-		else if (found == 1) { /* device is different kind */
+		} else if (found == 1) { /* device is different in some way */
 			changes++;
-			printk("cciss%d: device c%db%dt%dl%d type changed "
-				"(device type now %s).\n",
-				ctlr, hostno, csd->bus, csd->target, csd->lun,
-					scsi_device_type(csd->devtype));
+			printk("cciss%d: device c%db%dt%dl%d has changed.\n",
+				ctlr, hostno, csd->bus, csd->target, csd->lun);
 			cciss_scsi_remove_entry(ctlr, hostno, i,
 				removed, &nremoved);
 			/* remove ^^^, hence i not incremented */
-			if (cciss_scsi_add_entry(ctlr, hostno,
-				&sd[j].scsi3addr[0], sd[j].devtype,
+			if (cciss_scsi_add_entry(ctlr, hostno, &sd[j],
 				added, &nadded) != 0)
 				/* we just removed one, so add can't fail. */
 					BUG();
 			csd->devtype = sd[j].devtype;
+			memcpy(csd->device_id, sd[j].device_id,
+				sizeof(csd->device_id));
+			memcpy(csd->vendor, sd[j].vendor,
+				sizeof(csd->vendor));
+			memcpy(csd->model, sd[j].model,
+				sizeof(csd->model));
+			memcpy(csd->revision, sd[j].revision,
+				sizeof(csd->revision));
 		} else 		/* device is same as it ever was, */
 			i++;	/* so just move along. */
 	}
@@ -577,7 +601,7 @@ adjust_cciss_scsi_table(int ctlr, int hostno,
 			csd = &ccissscsi[ctlr].dev[j];
 			if (SCSI3ADDR_EQ(sd[i].scsi3addr,
 				csd->scsi3addr)) {
-				if (sd[i].devtype == csd->devtype)
+				if (device_is_the_same(&sd[i], csd))
 					found=2;	/* found device */
 				else
 					found=1; 	/* found a bug. */
@@ -586,16 +610,14 @@ adjust_cciss_scsi_table(int ctlr, int hostno,
 		}
 		if (!found) {
 			changes++;
-			if (cciss_scsi_add_entry(ctlr, hostno, 
-
-				&sd[i].scsi3addr[0], sd[i].devtype,
+			if (cciss_scsi_add_entry(ctlr, hostno, &sd[i],
 				added, &nadded) != 0)
 				break;
 		} else if (found == 1) {
 			/* should never happen... */
 			changes++;
-			printk("cciss%d: device unexpectedly changed type\n",
-				ctlr);
+			printk(KERN_WARNING "cciss%d: device "
+				"unexpectedly changed\n", ctlr);
 			/* but if it does happen, we just ignore that device */
 		}
 	}
@@ -1012,7 +1034,8 @@ cciss_scsi_interpret_error(CommandList_struct *cp)
 
 static int
 cciss_scsi_do_inquiry(ctlr_info_t *c, unsigned char *scsi3addr, 
-		 unsigned char *buf, unsigned char bufsize)
+	unsigned char page, unsigned char *buf,
+	unsigned char bufsize)
 {
 	int rc;
 	CommandList_struct *cp;
@@ -1032,8 +1055,8 @@ cciss_scsi_do_inquiry(ctlr_info_t *c, unsigned char *scsi3addr,
 	ei = cp->err_info; 
 
 	cdb[0] = CISS_INQUIRY;
-	cdb[1] = 0;
-	cdb[2] = 0;
+	cdb[1] = (page != 0);
+	cdb[2] = page;
 	cdb[3] = 0;
 	cdb[4] = bufsize;
 	cdb[5] = 0;
@@ -1053,6 +1076,25 @@ cciss_scsi_do_inquiry(ctlr_info_t *c, unsigned char *scsi3addr,
 	return rc;	
 }
 
+/* Get the device id from inquiry page 0x83 */
+static int cciss_scsi_get_device_id(ctlr_info_t *c, unsigned char *scsi3addr,
+	unsigned char *device_id, int buflen)
+{
+	int rc;
+	unsigned char *buf;
+
+	if (buflen > 16)
+		buflen = 16;
+	buf = kzalloc(64, GFP_KERNEL);
+	if (!buf)
+		return -1;
+	rc = cciss_scsi_do_inquiry(c, scsi3addr, 0x83, buf, 64);
+	if (rc == 0)
+		memcpy(device_id, &buf[8], buflen);
+	kfree(buf);
+	return rc != 0;
+}
+
 static int
 cciss_scsi_do_report_phys_luns(ctlr_info_t *c, 
 		ReportLunData_struct *buf, int bufsize)
@@ -1142,25 +1184,21 @@ cciss_update_non_disk_devices(int cntl_num, int hostno)
 	ctlr_info_t *c;
 	__u32 num_luns=0;
 	unsigned char *ch;
-	/* unsigned char found[CCISS_MAX_SCSI_DEVS_PER_HBA]; */
-	struct cciss_scsi_dev_t currentsd[CCISS_MAX_SCSI_DEVS_PER_HBA];
+	struct cciss_scsi_dev_t *currentsd, *this_device;
 	int ncurrent=0;
 	int reportlunsize = sizeof(*ld_buff) + CISS_MAX_PHYS_LUN * 8;
 	int i;
 
 	c = (ctlr_info_t *) hba[cntl_num];	
 	ld_buff = kzalloc(reportlunsize, GFP_KERNEL);
-	if (ld_buff == NULL) {
-		printk(KERN_ERR "cciss: out of memory\n");
-		return;
-	}
 	inq_buff = kmalloc(OBDR_TAPE_INQ_SIZE, GFP_KERNEL);
-        if (inq_buff == NULL) {
-                printk(KERN_ERR "cciss: out of memory\n");
-                kfree(ld_buff);
-                return;
+	currentsd = kzalloc(sizeof(*currentsd) *
+			(CCISS_MAX_SCSI_DEVS_PER_HBA+1), GFP_KERNEL);
+	if (ld_buff == NULL || inq_buff == NULL || currentsd == NULL) {
+		printk(KERN_ERR "cciss: out of memory\n");
+		goto out;
 	}
-
+	this_device = &currentsd[CCISS_MAX_SCSI_DEVS_PER_HBA];
 	if (cciss_scsi_do_report_phys_luns(c, ld_buff, reportlunsize) == 0) {
 		ch = &ld_buff->LUNListLength[0];
 		num_luns = ((ch[0]<<24) | (ch[1]<<16) | (ch[2]<<8) | ch[3]) / 8;
@@ -1179,23 +1217,34 @@ cciss_update_non_disk_devices(int cntl_num, int hostno)
 
 
 	/* adjust our table of devices */	
-	for(i=0; i<num_luns; i++)
-	{
-		int devtype;
-
+	for (i = 0; i < num_luns; i++) {
 		/* for each physical lun, do an inquiry */
 		if (ld_buff->LUN[i][3] & 0xC0) continue;
 		memset(inq_buff, 0, OBDR_TAPE_INQ_SIZE);
 		memcpy(&scsi3addr[0], &ld_buff->LUN[i][0], 8);
 
-		if (cciss_scsi_do_inquiry(hba[cntl_num], scsi3addr, inq_buff,
-			(unsigned char) OBDR_TAPE_INQ_SIZE) != 0) {
+		if (cciss_scsi_do_inquiry(hba[cntl_num], scsi3addr, 0, inq_buff,
+			(unsigned char) OBDR_TAPE_INQ_SIZE) != 0)
 			/* Inquiry failed (msg printed already) */
-			devtype = 0; /* so we will skip this device. */
-		} else /* what kind of device is this? */
-			devtype = (inq_buff[0] & 0x1f);
-
-		switch (devtype)
+			continue; /* so we will skip this device. */
+
+		this_device->devtype = (inq_buff[0] & 0x1f);
+		this_device->bus = -1;
+		this_device->target = -1;
+		this_device->lun = -1;
+		memcpy(this_device->scsi3addr, scsi3addr, 8);
+		memcpy(this_device->vendor, &inq_buff[8],
+			sizeof(this_device->vendor));
+		memcpy(this_device->model, &inq_buff[16],
+			sizeof(this_device->model));
+		memcpy(this_device->revision, &inq_buff[32],
+			sizeof(this_device->revision));
+		memset(this_device->device_id, 0,
+			sizeof(this_device->device_id));
+		cciss_scsi_get_device_id(hba[cntl_num], scsi3addr,
+			this_device->device_id, sizeof(this_device->device_id));
+
+		switch (this_device->devtype)
 		{
 		  case 0x05: /* CD-ROM */ {
 
@@ -1220,15 +1269,10 @@ cciss_update_non_disk_devices(int cntl_num, int hostno)
 			if (ncurrent >= CCISS_MAX_SCSI_DEVS_PER_HBA) {
 				printk(KERN_INFO "cciss%d: %s ignored, "
 					"too many devices.\n", cntl_num,
-					scsi_device_type(devtype));
+					scsi_device_type(this_device->devtype));
 				break;
 			}
-			memcpy(&currentsd[ncurrent].scsi3addr[0], 
-				&scsi3addr[0], 8);
-			currentsd[ncurrent].devtype = devtype;
-			currentsd[ncurrent].bus = -1;
-			currentsd[ncurrent].target = -1;
-			currentsd[ncurrent].lun = -1;
+			currentsd[ncurrent] = *this_device;
 			ncurrent++;
 			break;
 		  default: 
@@ -1240,6 +1284,7 @@ cciss_update_non_disk_devices(int cntl_num, int hostno)
 out:
 	kfree(inq_buff);
 	kfree(ld_buff);
+	kfree(currentsd);
 	return;
 }