aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/input/touchscreen
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/input/touchscreen')
-rw-r--r--drivers/input/touchscreen/ads7846.c38
-rw-r--r--drivers/input/touchscreen/wacom_w8001.c13
2 files changed, 33 insertions, 18 deletions
diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
index 14ea54b..4bf2316 100644
--- a/drivers/input/touchscreen/ads7846.c
+++ b/drivers/input/touchscreen/ads7846.c
@@ -941,28 +941,29 @@ static int __devinit ads7846_setup_pendown(struct spi_device *spi, struct ads784
struct ads7846_platform_data *pdata = spi->dev.platform_data;
int err;
- /* REVISIT when the irq can be triggered active-low, or if for some
+ /*
+ * REVISIT when the irq can be triggered active-low, or if for some
* reason the touchscreen isn't hooked up, we don't need to access
* the pendown state.
*/
- if (!pdata->get_pendown_state && !gpio_is_valid(pdata->gpio_pendown)) {
- dev_err(&spi->dev, "no get_pendown_state nor gpio_pendown?\n");
- return -EINVAL;
- }
if (pdata->get_pendown_state) {
ts->get_pendown_state = pdata->get_pendown_state;
- return 0;
- }
+ } else if (gpio_is_valid(pdata->gpio_pendown)) {
- err = gpio_request(pdata->gpio_pendown, "ads7846_pendown");
- if (err) {
- dev_err(&spi->dev, "failed to request pendown GPIO%d\n",
- pdata->gpio_pendown);
- return err;
- }
+ err = gpio_request(pdata->gpio_pendown, "ads7846_pendown");
+ if (err) {
+ dev_err(&spi->dev, "failed to request pendown GPIO%d\n",
+ pdata->gpio_pendown);
+ return err;
+ }
- ts->gpio_pendown = pdata->gpio_pendown;
+ ts->gpio_pendown = pdata->gpio_pendown;
+
+ } else {
+ dev_err(&spi->dev, "no get_pendown_state nor gpio_pendown?\n");
+ return -EINVAL;
+ }
return 0;
}
@@ -1353,7 +1354,7 @@ static int __devinit ads7846_probe(struct spi_device *spi)
err_put_regulator:
regulator_put(ts->reg);
err_free_gpio:
- if (ts->gpio_pendown != -1)
+ if (!ts->get_pendown_state)
gpio_free(ts->gpio_pendown);
err_cleanup_filter:
if (ts->filter_cleanup)
@@ -1383,8 +1384,13 @@ static int __devexit ads7846_remove(struct spi_device *spi)
regulator_disable(ts->reg);
regulator_put(ts->reg);
- if (ts->gpio_pendown != -1)
+ if (!ts->get_pendown_state) {
+ /*
+ * If we are not using specialized pendown method we must
+ * have been relying on gpio we set up ourselves.
+ */
gpio_free(ts->gpio_pendown);
+ }
if (ts->filter_cleanup)
ts->filter_cleanup(ts->filter_data);
diff --git a/drivers/input/touchscreen/wacom_w8001.c b/drivers/input/touchscreen/wacom_w8001.c
index 5cb8449..c14412e 100644
--- a/drivers/input/touchscreen/wacom_w8001.c
+++ b/drivers/input/touchscreen/wacom_w8001.c
@@ -51,6 +51,10 @@ MODULE_LICENSE("GPL");
#define W8001_PKTLEN_TPCCTL 11 /* control packet */
#define W8001_PKTLEN_TOUCH2FG 13
+/* resolution in points/mm */
+#define W8001_PEN_RESOLUTION 100
+#define W8001_TOUCH_RESOLUTION 10
+
struct w8001_coord {
u8 rdy;
u8 tsw;
@@ -198,7 +202,7 @@ static void parse_touchquery(u8 *data, struct w8001_touch_query *query)
query->y = 1024;
if (query->panel_res)
query->x = query->y = (1 << query->panel_res);
- query->panel_res = 10;
+ query->panel_res = W8001_TOUCH_RESOLUTION;
}
}
@@ -394,6 +398,8 @@ static int w8001_setup(struct w8001 *w8001)
input_set_abs_params(dev, ABS_X, 0, coord.x, 0, 0);
input_set_abs_params(dev, ABS_Y, 0, coord.y, 0, 0);
+ input_abs_set_res(dev, ABS_X, W8001_PEN_RESOLUTION);
+ input_abs_set_res(dev, ABS_Y, W8001_PEN_RESOLUTION);
input_set_abs_params(dev, ABS_PRESSURE, 0, coord.pen_pressure, 0, 0);
if (coord.tilt_x && coord.tilt_y) {
input_set_abs_params(dev, ABS_TILT_X, 0, coord.tilt_x, 0, 0);
@@ -418,14 +424,17 @@ static int w8001_setup(struct w8001 *w8001)
w8001->max_touch_x = touch.x;
w8001->max_touch_y = touch.y;
- /* scale to pen maximum */
if (w8001->max_pen_x && w8001->max_pen_y) {
+ /* if pen is supported scale to pen maximum */
touch.x = w8001->max_pen_x;
touch.y = w8001->max_pen_y;
+ touch.panel_res = W8001_PEN_RESOLUTION;
}
input_set_abs_params(dev, ABS_X, 0, touch.x, 0, 0);
input_set_abs_params(dev, ABS_Y, 0, touch.y, 0, 0);
+ input_abs_set_res(dev, ABS_X, touch.panel_res);
+ input_abs_set_res(dev, ABS_Y, touch.panel_res);
switch (touch.sensor_id) {
case 0: