diff options
Diffstat (limited to 'drivers/net/ixgbe/ixgbe_82598.c')
-rw-r--r-- | drivers/net/ixgbe/ixgbe_82598.c | 56 |
1 files changed, 15 insertions, 41 deletions
diff --git a/drivers/net/ixgbe/ixgbe_82598.c b/drivers/net/ixgbe/ixgbe_82598.c index 522c03b..cb7f0c3 100644 --- a/drivers/net/ixgbe/ixgbe_82598.c +++ b/drivers/net/ixgbe/ixgbe_82598.c @@ -41,8 +41,7 @@ static s32 ixgbe_get_copper_link_capabilities_82598(struct ixgbe_hw *hw, ixgbe_link_speed *speed, bool *autoneg); -static s32 ixgbe_setup_copper_link_82598(struct ixgbe_hw *hw); -static s32 ixgbe_setup_copper_link_speed_82598(struct ixgbe_hw *hw, +static s32 ixgbe_setup_copper_link_82598(struct ixgbe_hw *hw, ixgbe_link_speed speed, bool autoneg, bool autoneg_wait_to_complete); @@ -59,7 +58,7 @@ static s32 ixgbe_read_i2c_eeprom_82598(struct ixgbe_hw *hw, u8 byte_offset, * increase the value to either 10ms to 250ms for capability version 1 config, * or 16ms to 55ms for version 2. **/ -void ixgbe_set_pcie_completion_timeout(struct ixgbe_hw *hw) +static void ixgbe_set_pcie_completion_timeout(struct ixgbe_hw *hw) { struct ixgbe_adapter *adapter = hw->back; u32 gcr = IXGBE_READ_REG(hw, IXGBE_GCR); @@ -143,7 +142,7 @@ static s32 ixgbe_get_invariants_82598(struct ixgbe_hw *hw) * not known. Perform the SFP init if necessary. * **/ -s32 ixgbe_init_phy_ops_82598(struct ixgbe_hw *hw) +static s32 ixgbe_init_phy_ops_82598(struct ixgbe_hw *hw) { struct ixgbe_mac_info *mac = &hw->mac; struct ixgbe_phy_info *phy = &hw->phy; @@ -156,8 +155,6 @@ s32 ixgbe_init_phy_ops_82598(struct ixgbe_hw *hw) /* Overwrite the link function pointers if copper PHY */ if (mac->ops.get_media_type(hw) == ixgbe_media_type_copper) { mac->ops.setup_link = &ixgbe_setup_copper_link_82598; - mac->ops.setup_link_speed = - &ixgbe_setup_copper_link_speed_82598; mac->ops.get_link_capabilities = &ixgbe_get_copper_link_capabilities_82598; } @@ -204,7 +201,7 @@ out: * Starts the hardware using the generic start_hw function. * Then set pcie completion timeout **/ -s32 ixgbe_start_hw_82598(struct ixgbe_hw *hw) +static s32 ixgbe_start_hw_82598(struct ixgbe_hw *hw) { s32 ret_val = 0; @@ -334,6 +331,7 @@ static enum ixgbe_media_type ixgbe_get_media_type_82598(struct ixgbe_hw *hw) media_type = ixgbe_media_type_fiber; break; case IXGBE_DEV_ID_82598AT: + case IXGBE_DEV_ID_82598AT2: media_type = ixgbe_media_type_copper; break; default: @@ -464,13 +462,14 @@ out: } /** - * ixgbe_setup_mac_link_82598 - Configures MAC link settings + * ixgbe_start_mac_link_82598 - Configures MAC link settings * @hw: pointer to hardware structure * * Configures link settings based on values in the ixgbe_hw struct. * Restarts the link. Performs autonegotiation if needed. **/ -static s32 ixgbe_setup_mac_link_82598(struct ixgbe_hw *hw) +static s32 ixgbe_start_mac_link_82598(struct ixgbe_hw *hw, + bool autoneg_wait_to_complete) { u32 autoc_reg; u32 links_reg; @@ -483,7 +482,7 @@ static s32 ixgbe_setup_mac_link_82598(struct ixgbe_hw *hw) IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg); /* Only poll for autoneg to complete if specified to do so */ - if (hw->phy.autoneg_wait_to_complete) { + if (autoneg_wait_to_complete) { if ((autoc_reg & IXGBE_AUTOC_LMS_MASK) == IXGBE_AUTOC_LMS_KX4_AN || (autoc_reg & IXGBE_AUTOC_LMS_MASK) == @@ -599,7 +598,7 @@ out: /** - * ixgbe_setup_mac_link_speed_82598 - Set MAC link speed + * ixgbe_setup_mac_link_82598 - Set MAC link speed * @hw: pointer to hardware structure * @speed: new link speed * @autoneg: true if auto-negotiation enabled @@ -607,7 +606,7 @@ out: * * Set the link speed in the AUTOC register and restarts link. **/ -static s32 ixgbe_setup_mac_link_speed_82598(struct ixgbe_hw *hw, +static s32 ixgbe_setup_mac_link_82598(struct ixgbe_hw *hw, ixgbe_link_speed speed, bool autoneg, bool autoneg_wait_to_complete) { @@ -637,14 +636,12 @@ static s32 ixgbe_setup_mac_link_speed_82598(struct ixgbe_hw *hw, } if (status == 0) { - hw->phy.autoneg_wait_to_complete = autoneg_wait_to_complete; - /* * Setup and restart the link based on the new values in * ixgbe_hw This will write the AUTOC register based on the new * stored values */ - status = ixgbe_setup_mac_link_82598(hw); + status = ixgbe_start_mac_link_82598(hw, autoneg_wait_to_complete); } return status; @@ -652,29 +649,7 @@ static s32 ixgbe_setup_mac_link_speed_82598(struct ixgbe_hw *hw, /** - * ixgbe_setup_copper_link_82598 - Setup copper link settings - * @hw: pointer to hardware structure - * - * Configures link settings based on values in the ixgbe_hw struct. - * Restarts the link. Performs autonegotiation if needed. Restart - * phy and wait for autonegotiate to finish. Then synchronize the - * MAC and PHY. - **/ -static s32 ixgbe_setup_copper_link_82598(struct ixgbe_hw *hw) -{ - s32 status; - - /* Restart autonegotiation on PHY */ - status = hw->phy.ops.setup_link(hw); - - /* Set up MAC */ - ixgbe_setup_mac_link_82598(hw); - - return status; -} - -/** - * ixgbe_setup_copper_link_speed_82598 - Set the PHY autoneg advertised field + * ixgbe_setup_copper_link_82598 - Set the PHY autoneg advertised field * @hw: pointer to hardware structure * @speed: new link speed * @autoneg: true if autonegotiation enabled @@ -682,7 +657,7 @@ static s32 ixgbe_setup_copper_link_82598(struct ixgbe_hw *hw) * * Sets the link speed in the AUTOC register in the MAC and restarts link. **/ -static s32 ixgbe_setup_copper_link_speed_82598(struct ixgbe_hw *hw, +static s32 ixgbe_setup_copper_link_82598(struct ixgbe_hw *hw, ixgbe_link_speed speed, bool autoneg, bool autoneg_wait_to_complete) @@ -694,7 +669,7 @@ static s32 ixgbe_setup_copper_link_speed_82598(struct ixgbe_hw *hw, autoneg_wait_to_complete); /* Set up MAC */ - ixgbe_setup_mac_link_82598(hw); + ixgbe_start_mac_link_82598(hw, autoneg_wait_to_complete); return status; } @@ -1162,7 +1137,6 @@ static struct ixgbe_mac_operations mac_ops_82598 = { .read_analog_reg8 = &ixgbe_read_analog_reg8_82598, .write_analog_reg8 = &ixgbe_write_analog_reg8_82598, .setup_link = &ixgbe_setup_mac_link_82598, - .setup_link_speed = &ixgbe_setup_mac_link_speed_82598, .check_link = &ixgbe_check_mac_link_82598, .get_link_capabilities = &ixgbe_get_link_capabilities_82598, .led_on = &ixgbe_led_on_generic, |