aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/wan/sdla_ft1.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wan/sdla_ft1.c')
-rw-r--r--drivers/net/wan/sdla_ft1.c345
1 files changed, 0 insertions, 345 deletions
diff --git a/drivers/net/wan/sdla_ft1.c b/drivers/net/wan/sdla_ft1.c
deleted file mode 100644
index 9d6528a..0000000
--- a/drivers/net/wan/sdla_ft1.c
+++ /dev/null
@@ -1,345 +0,0 @@
-/*****************************************************************************
-* sdla_chdlc.c WANPIPE(tm) Multiprotocol WAN Link Driver. Cisco HDLC module.
-*
-* Authors: Nenad Corbic <ncorbic@sangoma.com>
-* Gideon Hack
-*
-* Copyright: (c) 1995-1999 Sangoma Technologies Inc.
-*
-* This program is free software; you can redistribute it and/or
-* modify it under the terms of the GNU General Public License
-* as published by the Free Software Foundation; either version
-* 2 of the License, or (at your option) any later version.
-* ============================================================================
-* Sep 30, 1999 Nenad Corbic Fixed dynamic IP and route setup.
-* Sep 23, 1999 Nenad Corbic Added SMP support, fixed tracing
-* Sep 13, 1999 Nenad Corbic Split up Port 0 and 1 into separate devices.
-* Jun 02, 1999 Gideon Hack Added support for the S514 adapter.
-* Oct 30, 1998 Jaspreet Singh Added Support for CHDLC API (HDLC STREAMING).
-* Oct 28, 1998 Jaspreet Singh Added Support for Dual Port CHDLC.
-* Aug 07, 1998 David Fong Initial version.
-*****************************************************************************/
-
-#include <linux/module.h>
-#include <linux/kernel.h> /* printk(), and other useful stuff */
-#include <linux/stddef.h> /* offsetof(), etc. */
-#include <linux/errno.h> /* return codes */
-#include <linux/string.h> /* inline memset(), etc. */
-#include <linux/slab.h> /* kmalloc(), kfree() */
-#include <linux/wanrouter.h> /* WAN router definitions */
-#include <linux/wanpipe.h> /* WANPIPE common user API definitions */
-#include <linux/if_arp.h> /* ARPHRD_* defines */
-#include <linux/jiffies.h> /* time_after() macro */
-
-#include <linux/inetdevice.h>
-#include <asm/uaccess.h>
-
-#include <linux/in.h> /* sockaddr_in */
-#include <linux/inet.h>
-#include <linux/if.h>
-#include <asm/byteorder.h> /* htons(), etc. */
-#include <linux/sdlapci.h>
-#include <asm/io.h>
-
-#include <linux/sdla_chdlc.h> /* CHDLC firmware API definitions */
-
-/****** Defines & Macros ****************************************************/
-
-/* reasons for enabling the timer interrupt on the adapter */
-#define TMR_INT_ENABLED_UDP 0x0001
-#define TMR_INT_ENABLED_UPDATE 0x0002
-
-#define CHDLC_DFLT_DATA_LEN 1500 /* default MTU */
-#define CHDLC_HDR_LEN 1
-
-#define IFF_POINTTOPOINT 0x10
-
-#define WANPIPE 0x00
-#define API 0x01
-#define CHDLC_API 0x01
-
-#define PORT(x) (x == 0 ? "PRIMARY" : "SECONDARY" )
-
-
-/******Data Structures*****************************************************/
-
-/* This structure is placed in the private data area of the device structure.
- * The card structure used to occupy the private area but now the following
- * structure will incorporate the card structure along with CHDLC specific data
- */
-
-typedef struct chdlc_private_area
-{
- struct net_device *slave;
- sdla_t *card;
- int TracingEnabled; /* For enabling Tracing */
- unsigned long curr_trace_addr; /* Used for Tracing */
- unsigned long start_trace_addr;
- unsigned long end_trace_addr;
- unsigned long base_addr_trace_buffer;
- unsigned long end_addr_trace_buffer;
- unsigned short number_trace_elements;
- unsigned available_buffer_space;
- unsigned long router_start_time;
- unsigned char route_status;
- unsigned char route_removed;
- unsigned long tick_counter; /* For 5s timeout counter */
- unsigned long router_up_time;
- u32 IP_address; /* IP addressing */
- u32 IP_netmask;
- unsigned char mc; /* Mulitcast support on/off */
- unsigned short udp_pkt_lgth; /* udp packet processing */
- char udp_pkt_src;
- char udp_pkt_data[MAX_LGTH_UDP_MGNT_PKT];
- unsigned short timer_int_enabled;
- char update_comms_stats; /* updating comms stats */
- //FIXME: add driver stats as per frame relay!
-
-} chdlc_private_area_t;
-
-/* Route Status options */
-#define NO_ROUTE 0x00
-#define ADD_ROUTE 0x01
-#define ROUTE_ADDED 0x02
-#define REMOVE_ROUTE 0x03
-
-
-/****** Function Prototypes *************************************************/
-/* WAN link driver entry points. These are called by the WAN router module. */
-static int wpft1_exec (struct sdla *card, void *u_cmd, void *u_data);
-static int chdlc_read_version (sdla_t* card, char* str);
-static int chdlc_error (sdla_t *card, int err, CHDLC_MAILBOX_STRUCT *mb);
-
-/****** Public Functions ****************************************************/
-
-/*============================================================================
- * Cisco HDLC protocol initialization routine.
- *
- * This routine is called by the main WANPIPE module during setup. At this
- * point adapter is completely initialized and firmware is running.
- * o read firmware version (to make sure it's alive)
- * o configure adapter
- * o initialize protocol-specific fields of the adapter data space.
- *
- * Return: 0 o.k.
- * < 0 failure.
- */
-int wpft1_init (sdla_t* card, wandev_conf_t* conf)
-{
- unsigned char port_num;
- int err;
-
- union
- {
- char str[80];
- } u;
- volatile CHDLC_MAILBOX_STRUCT* mb;
- CHDLC_MAILBOX_STRUCT* mb1;
- unsigned long timeout;
-
- /* Verify configuration ID */
- if (conf->config_id != WANCONFIG_CHDLC) {
- printk(KERN_INFO "%s: invalid configuration ID %u!\n",
- card->devname, conf->config_id);
- return -EINVAL;
- }
-
- /* Use primary port */
- card->u.c.comm_port = 0;
-
-
- /* Initialize protocol-specific fields */
- if(card->hw.type != SDLA_S514){
- card->mbox = (void *) card->hw.dpmbase;
- }else{
- card->mbox = (void *) card->hw.dpmbase + PRI_BASE_ADDR_MB_STRUCT;
- }
-
- mb = mb1 = card->mbox;
-
- if (!card->configured){
-
- /* The board will place an 'I' in the return code to indicate that it is
- ready to accept commands. We expect this to be completed in less
- than 1 second. */
-
- timeout = jiffies;
- while (mb->return_code != 'I') /* Wait 1s for board to initialize */
- if (time_after(jiffies, timeout + 1*HZ)) break;
-
- if (mb->return_code != 'I') {
- printk(KERN_INFO
- "%s: Initialization not completed by adapter\n",
- card->devname);
- printk(KERN_INFO "Please contact Sangoma representative.\n");
- return -EIO;
- }
- }
-
- /* Read firmware version. Note that when adapter initializes, it
- * clears the mailbox, so it may appear that the first command was
- * executed successfully when in fact it was merely erased. To work
- * around this, we execute the first command twice.
- */
-
- if (chdlc_read_version(card, u.str))
- return -EIO;
-
- printk(KERN_INFO "%s: Running FT1 Configuration firmware v%s\n",
- card->devname, u.str);
-
- card->isr = NULL;
- card->poll = NULL;
- card->exec = &wpft1_exec;
- card->wandev.update = NULL;
- card->wandev.new_if = NULL;
- card->wandev.del_if = NULL;
- card->wandev.state = WAN_DUALPORT;
- card->wandev.udp_port = conf->udp_port;
-
- card->wandev.new_if_cnt = 0;
-
- /* This is for the ports link state */
- card->u.c.state = WAN_DISCONNECTED;
-
- /* reset the number of times the 'update()' proc has been called */
- card->u.c.update_call_count = 0;
-
- card->wandev.ttl = 0x7F;
- card->wandev.interface = 0;
-
- card->wandev.clocking = 0;
-
- port_num = card->u.c.comm_port;
-
- /* Setup Port Bps */
-
- card->wandev.bps = 0;
-
- card->wandev.mtu = MIN_LGTH_CHDLC_DATA_CFG;
-
- /* Set up the interrupt status area */
- /* Read the CHDLC Configuration and obtain:
- * Ptr to shared memory infor struct
- * Use this pointer to calculate the value of card->u.c.flags !
- */
- mb1->buffer_length = 0;
- mb1->command = READ_CHDLC_CONFIGURATION;
- err = sdla_exec(mb1) ? mb1->return_code : CMD_TIMEOUT;
- if(err != COMMAND_OK) {
- chdlc_error(card, err, mb1);
- return -EIO;
- }
-
- if(card->hw.type == SDLA_S514){
- card->u.c.flags = (void *)(card->hw.dpmbase +
- (((CHDLC_CONFIGURATION_STRUCT *)mb1->data)->
- ptr_shared_mem_info_struct));
- }else{
- card->u.c.flags = (void *)(card->hw.dpmbase +
- (((CHDLC_CONFIGURATION_STRUCT *)mb1->data)->
- ptr_shared_mem_info_struct % SDLA_WINDOWSIZE));
- }
-
- card->wandev.state = WAN_FT1_READY;
- printk(KERN_INFO "%s: FT1 Config Ready !\n",card->devname);
-
- return 0;
-}
-
-static int wpft1_exec(sdla_t *card, void *u_cmd, void *u_data)
-{
- CHDLC_MAILBOX_STRUCT* mbox = card->mbox;
- int len;
-
- if (copy_from_user((void*)&mbox->command, u_cmd, sizeof(ft1_exec_cmd_t))){
- return -EFAULT;
- }
-
- len = mbox->buffer_length;
-
- if (len) {
- if( copy_from_user((void*)&mbox->data, u_data, len)){
- return -EFAULT;
- }
- }
-
- /* execute command */
- if (!sdla_exec(mbox)){
- return -EIO;
- }
-
- /* return result */
- if( copy_to_user(u_cmd, (void*)&mbox->command, sizeof(ft1_exec_cmd_t))){
- return -EFAULT;
- }
-
- len = mbox->buffer_length;
-
- if (len && u_data && copy_to_user(u_data, (void*)&mbox->data, len)){
- return -EFAULT;
- }
-
- return 0;
-
-}
-
-/*============================================================================
- * Read firmware code version.
- * Put code version as ASCII string in str.
- */
-static int chdlc_read_version (sdla_t* card, char* str)
-{
- CHDLC_MAILBOX_STRUCT* mb = card->mbox;
- int len;
- char err;
- mb->buffer_length = 0;
- mb->command = READ_CHDLC_CODE_VERSION;
- err = sdla_exec(mb) ? mb->return_code : CMD_TIMEOUT;
-
- if(err != COMMAND_OK) {
- chdlc_error(card,err,mb);
- }
- else if (str) { /* is not null */
- len = mb->buffer_length;
- memcpy(str, mb->data, len);
- str[len] = '\0';
- }
- return (err);
-}
-
-/*============================================================================
- * Firmware error handler.
- * This routine is called whenever firmware command returns non-zero
- * return code.
- *
- * Return zero if previous command has to be cancelled.
- */
-static int chdlc_error (sdla_t *card, int err, CHDLC_MAILBOX_STRUCT *mb)
-{
- unsigned cmd = mb->command;
-
- switch (err) {
-
- case CMD_TIMEOUT:
- printk(KERN_ERR "%s: command 0x%02X timed out!\n",
- card->devname, cmd);
- break;
-
- case S514_BOTH_PORTS_SAME_CLK_MODE:
- if(cmd == SET_CHDLC_CONFIGURATION) {
- printk(KERN_INFO
- "%s: Configure both ports for the same clock source\n",
- card->devname);
- break;
- }
-
- default:
- printk(KERN_INFO "%s: command 0x%02X returned 0x%02X!\n",
- card->devname, cmd, err);
- }
-
- return 0;
-}
-
-MODULE_LICENSE("GPL");