diff options
Diffstat (limited to 'drivers/net/wireless/iwlwifi/iwl-core.c')
-rw-r--r-- | drivers/net/wireless/iwlwifi/iwl-core.c | 1259 |
1 files changed, 1204 insertions, 55 deletions
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c index 2dfd982..a44188b 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.c +++ b/drivers/net/wireless/iwlwifi/iwl-core.c @@ -34,9 +34,11 @@ struct iwl_priv; /* FIXME: remove */ #include "iwl-debug.h" #include "iwl-eeprom.h" -#include "iwl-4965.h" /* FIXME: remove */ +#include "iwl-dev.h" /* FIXME: remove */ #include "iwl-core.h" +#include "iwl-io.h" #include "iwl-rfkill.h" +#include "iwl-power.h" MODULE_DESCRIPTION("iwl core"); @@ -44,10 +46,106 @@ MODULE_VERSION(IWLWIFI_VERSION); MODULE_AUTHOR(DRV_COPYRIGHT); MODULE_LICENSE("GPL"); -#ifdef CONFIG_IWLWIFI_DEBUG -u32 iwl_debug_level; -EXPORT_SYMBOL(iwl_debug_level); -#endif +#define IWL_DECLARE_RATE_INFO(r, s, ip, in, rp, rn, pp, np) \ + [IWL_RATE_##r##M_INDEX] = { IWL_RATE_##r##M_PLCP, \ + IWL_RATE_SISO_##s##M_PLCP, \ + IWL_RATE_MIMO2_##s##M_PLCP,\ + IWL_RATE_MIMO3_##s##M_PLCP,\ + IWL_RATE_##r##M_IEEE, \ + IWL_RATE_##ip##M_INDEX, \ + IWL_RATE_##in##M_INDEX, \ + IWL_RATE_##rp##M_INDEX, \ + IWL_RATE_##rn##M_INDEX, \ + IWL_RATE_##pp##M_INDEX, \ + IWL_RATE_##np##M_INDEX } + +/* + * Parameter order: + * rate, ht rate, prev rate, next rate, prev tgg rate, next tgg rate + * + * If there isn't a valid next or previous rate then INV is used which + * maps to IWL_RATE_INVALID + * + */ +const struct iwl_rate_info iwl_rates[IWL_RATE_COUNT] = { + IWL_DECLARE_RATE_INFO(1, INV, INV, 2, INV, 2, INV, 2), /* 1mbps */ + IWL_DECLARE_RATE_INFO(2, INV, 1, 5, 1, 5, 1, 5), /* 2mbps */ + IWL_DECLARE_RATE_INFO(5, INV, 2, 6, 2, 11, 2, 11), /*5.5mbps */ + IWL_DECLARE_RATE_INFO(11, INV, 9, 12, 9, 12, 5, 18), /* 11mbps */ + IWL_DECLARE_RATE_INFO(6, 6, 5, 9, 5, 11, 5, 11), /* 6mbps */ + IWL_DECLARE_RATE_INFO(9, 6, 6, 11, 6, 11, 5, 11), /* 9mbps */ + IWL_DECLARE_RATE_INFO(12, 12, 11, 18, 11, 18, 11, 18), /* 12mbps */ + IWL_DECLARE_RATE_INFO(18, 18, 12, 24, 12, 24, 11, 24), /* 18mbps */ + IWL_DECLARE_RATE_INFO(24, 24, 18, 36, 18, 36, 18, 36), /* 24mbps */ + IWL_DECLARE_RATE_INFO(36, 36, 24, 48, 24, 48, 24, 48), /* 36mbps */ + IWL_DECLARE_RATE_INFO(48, 48, 36, 54, 36, 54, 36, 54), /* 48mbps */ + IWL_DECLARE_RATE_INFO(54, 54, 48, INV, 48, INV, 48, INV),/* 54mbps */ + IWL_DECLARE_RATE_INFO(60, 60, 48, INV, 48, INV, 48, INV),/* 60mbps */ + /* FIXME:RS: ^^ should be INV (legacy) */ +}; +EXPORT_SYMBOL(iwl_rates); + +/** + * translate ucode response to mac80211 tx status control values + */ +void iwl_hwrate_to_tx_control(struct iwl_priv *priv, u32 rate_n_flags, + struct ieee80211_tx_info *control) +{ + int rate_index; + + control->antenna_sel_tx = + ((rate_n_flags & RATE_MCS_ANT_ABC_MSK) >> RATE_MCS_ANT_POS); + if (rate_n_flags & RATE_MCS_HT_MSK) + control->flags |= IEEE80211_TX_CTL_OFDM_HT; + if (rate_n_flags & RATE_MCS_GF_MSK) + control->flags |= IEEE80211_TX_CTL_GREEN_FIELD; + if (rate_n_flags & RATE_MCS_FAT_MSK) + control->flags |= IEEE80211_TX_CTL_40_MHZ_WIDTH; + if (rate_n_flags & RATE_MCS_DUP_MSK) + control->flags |= IEEE80211_TX_CTL_DUP_DATA; + if (rate_n_flags & RATE_MCS_SGI_MSK) + control->flags |= IEEE80211_TX_CTL_SHORT_GI; + rate_index = iwl_hwrate_to_plcp_idx(rate_n_flags); + if (control->band == IEEE80211_BAND_5GHZ) + rate_index -= IWL_FIRST_OFDM_RATE; + control->tx_rate_idx = rate_index; +} +EXPORT_SYMBOL(iwl_hwrate_to_tx_control); + +int iwl_hwrate_to_plcp_idx(u32 rate_n_flags) +{ + int idx = 0; + + /* HT rate format */ + if (rate_n_flags & RATE_MCS_HT_MSK) { + idx = (rate_n_flags & 0xff); + + if (idx >= IWL_RATE_MIMO2_6M_PLCP) + idx = idx - IWL_RATE_MIMO2_6M_PLCP; + + idx += IWL_FIRST_OFDM_RATE; + /* skip 9M not supported in ht*/ + if (idx >= IWL_RATE_9M_INDEX) + idx += 1; + if ((idx >= IWL_FIRST_OFDM_RATE) && (idx <= IWL_LAST_OFDM_RATE)) + return idx; + + /* legacy rate format, search for match in table */ + } else { + for (idx = 0; idx < ARRAY_SIZE(iwl_rates); idx++) + if (iwl_rates[idx].plcp == (rate_n_flags & 0xFF)) + return idx; + } + + return -1; +} +EXPORT_SYMBOL(iwl_hwrate_to_plcp_idx); + + + +const u8 iwl_bcast_addr[ETH_ALEN] = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF }; +EXPORT_SYMBOL(iwl_bcast_addr); + /* This function both allocates and initializes hw and priv. */ struct ieee80211_hw *iwl_alloc_all(struct iwl_cfg *cfg, @@ -72,25 +170,132 @@ out: } EXPORT_SYMBOL(iwl_alloc_all); +void iwl_hw_detect(struct iwl_priv *priv) +{ + priv->hw_rev = _iwl_read32(priv, CSR_HW_REV); + priv->hw_wa_rev = _iwl_read32(priv, CSR_HW_REV_WA_REG); + pci_read_config_byte(priv->pci_dev, PCI_REVISION_ID, &priv->rev_id); +} +EXPORT_SYMBOL(iwl_hw_detect); + +/* Tell nic where to find the "keep warm" buffer */ +int iwl_kw_init(struct iwl_priv *priv) +{ + unsigned long flags; + int ret; + + spin_lock_irqsave(&priv->lock, flags); + ret = iwl_grab_nic_access(priv); + if (ret) + goto out; + + iwl_write_direct32(priv, FH_KW_MEM_ADDR_REG, + priv->kw.dma_addr >> 4); + iwl_release_nic_access(priv); +out: + spin_unlock_irqrestore(&priv->lock, flags); + return ret; +} + +int iwl_kw_alloc(struct iwl_priv *priv) +{ + struct pci_dev *dev = priv->pci_dev; + struct iwl_kw *kw = &priv->kw; + + kw->size = IWL_KW_SIZE; + kw->v_addr = pci_alloc_consistent(dev, kw->size, &kw->dma_addr); + if (!kw->v_addr) + return -ENOMEM; + + return 0; +} + +/** + * iwl_kw_free - Free the "keep warm" buffer + */ +void iwl_kw_free(struct iwl_priv *priv) +{ + struct pci_dev *dev = priv->pci_dev; + struct iwl_kw *kw = &priv->kw; + + if (kw->v_addr) { + pci_free_consistent(dev, kw->size, kw->v_addr, kw->dma_addr); + memset(kw, 0, sizeof(*kw)); + } +} + +int iwl_hw_nic_init(struct iwl_priv *priv) +{ + unsigned long flags; + struct iwl_rx_queue *rxq = &priv->rxq; + int ret; + + /* nic_init */ + spin_lock_irqsave(&priv->lock, flags); + priv->cfg->ops->lib->apm_ops.init(priv); + iwl_write32(priv, CSR_INT_COALESCING, 512 / 32); + spin_unlock_irqrestore(&priv->lock, flags); + + ret = priv->cfg->ops->lib->apm_ops.set_pwr_src(priv, IWL_PWR_SRC_VMAIN); + + priv->cfg->ops->lib->apm_ops.config(priv); + + /* Allocate the RX queue, or reset if it is already allocated */ + if (!rxq->bd) { + ret = iwl_rx_queue_alloc(priv); + if (ret) { + IWL_ERROR("Unable to initialize Rx queue\n"); + return -ENOMEM; + } + } else + iwl_rx_queue_reset(priv, rxq); + + iwl_rx_replenish(priv); + + iwl_rx_init(priv, rxq); + + spin_lock_irqsave(&priv->lock, flags); + + rxq->need_update = 1; + iwl_rx_queue_update_write_ptr(priv, rxq); + + spin_unlock_irqrestore(&priv->lock, flags); + + /* Allocate and init all Tx and Command queues */ + ret = iwl_txq_ctx_reset(priv); + if (ret) + return ret; + + set_bit(STATUS_INIT, &priv->status); + + return 0; +} +EXPORT_SYMBOL(iwl_hw_nic_init); + /** - * iwlcore_clear_stations_table - Clear the driver's station table + * iwl_clear_stations_table - Clear the driver's station table * * NOTE: This does not clear or otherwise alter the device's station table. */ -void iwlcore_clear_stations_table(struct iwl_priv *priv) +void iwl_clear_stations_table(struct iwl_priv *priv) { unsigned long flags; spin_lock_irqsave(&priv->sta_lock, flags); + if (iwl_is_alive(priv) && + !test_bit(STATUS_EXIT_PENDING, &priv->status) && + iwl_send_cmd_pdu_async(priv, REPLY_REMOVE_ALL_STA, 0, NULL, NULL)) + IWL_ERROR("Couldn't clear the station table\n"); + priv->num_stations = 0; memset(priv->stations, 0, sizeof(priv->stations)); spin_unlock_irqrestore(&priv->sta_lock, flags); } -EXPORT_SYMBOL(iwlcore_clear_stations_table); +EXPORT_SYMBOL(iwl_clear_stations_table); -void iwlcore_reset_qos(struct iwl_priv *priv) +void iwl_reset_qos(struct iwl_priv *priv) { u16 cw_min = 15; u16 cw_max = 1023; @@ -176,7 +381,397 @@ void iwlcore_reset_qos(struct iwl_priv *priv) spin_unlock_irqrestore(&priv->lock, flags); } -EXPORT_SYMBOL(iwlcore_reset_qos); +EXPORT_SYMBOL(iwl_reset_qos); + +#define MAX_BIT_RATE_40_MHZ 0x96; /* 150 Mbps */ +#define MAX_BIT_RATE_20_MHZ 0x48; /* 72 Mbps */ +static void iwlcore_init_ht_hw_capab(const struct iwl_priv *priv, + struct ieee80211_ht_info *ht_info, + enum ieee80211_band band) +{ + u16 max_bit_rate = 0; + u8 rx_chains_num = priv->hw_params.rx_chains_num; + u8 tx_chains_num = priv->hw_params.tx_chains_num; + + ht_info->cap = 0; + memset(ht_info->supp_mcs_set, 0, 16); + + ht_info->ht_supported = 1; + + ht_info->cap |= (u16)IEEE80211_HT_CAP_GRN_FLD; + ht_info->cap |= (u16)IEEE80211_HT_CAP_SGI_20; + ht_info->cap |= (u16)(IEEE80211_HT_CAP_MIMO_PS & + (IWL_MIMO_PS_NONE << 2)); + + max_bit_rate = MAX_BIT_RATE_20_MHZ; + if (priv->hw_params.fat_channel & BIT(band)) { + ht_info->cap |= (u16)IEEE80211_HT_CAP_SUP_WIDTH; + ht_info->cap |= (u16)IEEE80211_HT_CAP_SGI_40; + ht_info->supp_mcs_set[4] = 0x01; + max_bit_rate = MAX_BIT_RATE_40_MHZ; + } + + if (priv->cfg->mod_params->amsdu_size_8K) + ht_info->cap |= (u16)IEEE80211_HT_CAP_MAX_AMSDU; + + ht_info->ampdu_factor = CFG_HT_RX_AMPDU_FACTOR_DEF; + ht_info->ampdu_density = CFG_HT_MPDU_DENSITY_DEF; + + ht_info->supp_mcs_set[0] = 0xFF; + if (rx_chains_num >= 2) + ht_info->supp_mcs_set[1] = 0xFF; + if (rx_chains_num >= 3) + ht_info->supp_mcs_set[2] = 0xFF; + + /* Highest supported Rx data rate */ + max_bit_rate *= rx_chains_num; + ht_info->supp_mcs_set[10] = (u8)(max_bit_rate & 0x00FF); + ht_info->supp_mcs_set[11] = (u8)((max_bit_rate & 0xFF00) >> 8); + + /* Tx MCS capabilities */ + ht_info->supp_mcs_set[12] = IEEE80211_HT_CAP_MCS_TX_DEFINED; + if (tx_chains_num != rx_chains_num) { + ht_info->supp_mcs_set[12] |= IEEE80211_HT_CAP_MCS_TX_RX_DIFF; + ht_info->supp_mcs_set[12] |= ((tx_chains_num - 1) << 2); + } +} + +static void iwlcore_init_hw_rates(struct iwl_priv *priv, + struct ieee80211_rate *rates) +{ + int i; + + for (i = 0; i < IWL_RATE_COUNT; i++) { + rates[i].bitrate = iwl_rates[i].ieee * 5; + rates[i].hw_value = i; /* Rate scaling will work on indexes */ + rates[i].hw_value_short = i; + rates[i].flags = 0; + if ((i > IWL_LAST_OFDM_RATE) || (i < IWL_FIRST_OFDM_RATE)) { + /* + * If CCK != 1M then set short preamble rate flag. + */ + rates[i].flags |= + (iwl_rates[i].plcp == IWL_RATE_1M_PLCP) ? + 0 : IEEE80211_RATE_SHORT_PREAMBLE; + } + } +} + +/** + * iwlcore_init_geos - Initialize mac80211's geo/channel info based from eeprom + */ +static int iwlcore_init_geos(struct iwl_priv *priv) +{ + struct iwl_channel_info *ch; + struct ieee80211_supported_band *sband; + struct ieee80211_channel *channels; + struct ieee80211_channel *geo_ch; + struct ieee80211_rate *rates; + int i = 0; + + if (priv->bands[IEEE80211_BAND_2GHZ].n_bitrates || + priv->bands[IEEE80211_BAND_5GHZ].n_bitrates) { + IWL_DEBUG_INFO("Geography modes already initialized.\n"); + set_bit(STATUS_GEO_CONFIGURED, &priv->status); + return 0; + } + + channels = kzalloc(sizeof(struct ieee80211_channel) * + priv->channel_count, GFP_KERNEL); + if (!channels) + return -ENOMEM; + + rates = kzalloc((sizeof(struct ieee80211_rate) * (IWL_RATE_COUNT + 1)), + GFP_KERNEL); + if (!rates) { + kfree(channels); + return -ENOMEM; + } + + /* 5.2GHz channels start after the 2.4GHz channels */ + sband = &priv->bands[IEEE80211_BAND_5GHZ]; + sband->channels = &channels[ARRAY_SIZE(iwl_eeprom_band_1)]; + /* just OFDM */ + sband->bitrates = &rates[IWL_FIRST_OFDM_RATE]; + sband->n_bitrates = IWL_RATE_COUNT - IWL_FIRST_OFDM_RATE; + + if (priv->cfg->sku & IWL_SKU_N) + iwlcore_init_ht_hw_capab(priv, &sband->ht_info, + IEEE80211_BAND_5GHZ); + + sband = &priv->bands[IEEE80211_BAND_2GHZ]; + sband->channels = channels; + /* OFDM & CCK */ + sband->bitrates = rates; + sband->n_bitrates = IWL_RATE_COUNT; + + if (priv->cfg->sku & IWL_SKU_N) + iwlcore_init_ht_hw_capab(priv, &sband->ht_info, + IEEE80211_BAND_2GHZ); + + priv->ieee_channels = channels; + priv->ieee_rates = rates; + + iwlcore_init_hw_rates(priv, rates); + + for (i = 0; i < priv->channel_count; i++) { + ch = &priv->channel_info[i]; + + /* FIXME: might be removed if scan is OK */ + if (!is_channel_valid(ch)) + continue; + + if (is_channel_a_band(ch)) + sband = &priv->bands[IEEE80211_BAND_5GHZ]; + else + sband = &priv->bands[IEEE80211_BAND_2GHZ]; + + geo_ch = &sband->channels[sband->n_channels++]; + + geo_ch->center_freq = + ieee80211_channel_to_frequency(ch->channel); + geo_ch->max_power = ch->max_power_avg; + geo_ch->max_antenna_gain = 0xff; + geo_ch->hw_value = ch->channel; + + if (is_channel_valid(ch)) { + if (!(ch->flags & EEPROM_CHANNEL_IBSS)) + geo_ch->flags |= IEEE80211_CHAN_NO_IBSS; + + if (!(ch->flags & EEPROM_CHANNEL_ACTIVE)) + geo_ch->flags |= IEEE80211_CHAN_PASSIVE_SCAN; + + if (ch->flags & EEPROM_CHANNEL_RADAR) + geo_ch->flags |= IEEE80211_CHAN_RADAR; + + geo_ch->flags |= ch->fat_extension_channel; + + if (ch->max_power_avg > priv->tx_power_channel_lmt) + priv->tx_power_channel_lmt = ch->max_power_avg; + } else { + geo_ch->flags |= IEEE80211_CHAN_DISABLED; + } + + /* Save flags for reg domain usage */ + geo_ch->orig_flags = geo_ch->flags; + + IWL_DEBUG_INFO("Channel %d Freq=%d[%sGHz] %s flag=0x%X\n", + ch->channel, geo_ch->center_freq, + is_channel_a_band(ch) ? "5.2" : "2.4", + geo_ch->flags & IEEE80211_CHAN_DISABLED ? + "restricted" : "valid", + geo_ch->flags); + } + + if ((priv->bands[IEEE80211_BAND_5GHZ].n_channels == 0) && + priv->cfg->sku & IWL_SKU_A) { + printk(KERN_INFO DRV_NAME + ": Incorrectly detected BG card as ABG. Please send " + "your PCI ID 0x%04X:0x%04X to maintainer.\n", + priv->pci_dev->device, priv->pci_dev->subsystem_device); + priv->cfg->sku &= ~IWL_SKU_A; + } + + printk(KERN_INFO DRV_NAME + ": Tunable channels: %d 802.11bg, %d 802.11a channels\n", + priv->bands[IEEE80211_BAND_2GHZ].n_channels, + priv->bands[IEEE80211_BAND_5GHZ].n_channels); + + + set_bit(STATUS_GEO_CONFIGURED, &priv->status); + + return 0; +} + +/* + * iwlcore_free_geos - undo allocations in iwlcore_init_geos + */ +static void iwlcore_free_geos(struct iwl_priv *priv) +{ + kfree(priv->ieee_channels); + kfree(priv->ieee_rates); + clear_bit(STATUS_GEO_CONFIGURED, &priv->status); +} + +static u8 is_single_rx_stream(struct iwl_priv *priv) +{ + return !priv->current_ht_config.is_ht || + ((priv->current_ht_config.supp_mcs_set[1] == 0) && + (priv->current_ht_config.supp_mcs_set[2] == 0)) || + priv->ps_mode == IWL_MIMO_PS_STATIC; +} + +static u8 iwl_is_channel_extension(struct iwl_priv *priv, + enum ieee80211_band band, + u16 channel, u8 extension_chan_offset) +{ + const struct iwl_channel_info *ch_info; + + ch_info = iwl_get_channel_info(priv, band, channel); + if (!is_channel_valid(ch_info)) + return 0; + + if (extension_chan_offset == IEEE80211_HT_IE_CHA_SEC_ABOVE) + return !(ch_info->fat_extension_channel & + IEEE80211_CHAN_NO_FAT_ABOVE); + else if (extension_chan_offset == IEEE80211_HT_IE_CHA_SEC_BELOW) + return !(ch_info->fat_extension_channel & + IEEE80211_CHAN_NO_FAT_BELOW); + + return 0; +} + +u8 iwl_is_fat_tx_allowed(struct iwl_priv *priv, + struct ieee80211_ht_info *sta_ht_inf) +{ + struct iwl_ht_info *iwl_ht_conf = &priv->current_ht_config; + + if ((!iwl_ht_conf->is_ht) || + (iwl_ht_conf->supported_chan_width != IWL_CHANNEL_WIDTH_40MHZ) || + (iwl_ht_conf->extension_chan_offset == IEEE80211_HT_IE_CHA_SEC_NONE)) + return 0; + + if (sta_ht_inf) { + if ((!sta_ht_inf->ht_supported) || + (!(sta_ht_inf->cap & IEEE80211_HT_CAP_SUP_WIDTH))) + return 0; + } + + return iwl_is_channel_extension(priv, priv->band, + iwl_ht_conf->control_channel, + iwl_ht_conf->extension_chan_offset); +} +EXPORT_SYMBOL(iwl_is_fat_tx_allowed); + +void iwl_set_rxon_ht(struct iwl_priv *priv, struct iwl_ht_info *ht_info) +{ + struct iwl_rxon_cmd *rxon = &priv->staging_rxon; + u32 val; + + if (!ht_info->is_ht) + return; + + /* Set up channel bandwidth: 20 MHz only, or 20/40 mixed if fat ok */ + if (iwl_is_fat_tx_allowed(priv, NULL)) + rxon->flags |= RXON_FLG_CHANNEL_MODE_MIXED_MSK; + else + rxon->flags &= ~(RXON_FLG_CHANNEL_MODE_MIXED_MSK | + RXON_FLG_CHANNEL_MODE_PURE_40_MSK); + + if (le16_to_cpu(rxon->channel) != ht_info->control_channel) { + IWL_DEBUG_ASSOC("control diff than current %d %d\n", + le16_to_cpu(rxon->channel), + ht_info->control_channel); + return; + } + + /* Note: control channel is opposite of extension channel */ + switch (ht_info->extension_chan_offset) { + case IEEE80211_HT_IE_CHA_SEC_ABOVE: + rxon->flags &= ~(RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK); + break; + case IEEE80211_HT_IE_CHA_SEC_BELOW: + rxon->flags |= RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK; + break; + case IEEE80211_HT_IE_CHA_SEC_NONE: + default: + rxon->flags &= ~RXON_FLG_CHANNEL_MODE_MIXED_MSK; + break; + } + + val = ht_info->ht_protection; + + rxon->flags |= cpu_to_le32(val << RXON_FLG_HT_OPERATING_MODE_POS); + + iwl_set_rxon_chain(priv); + + IWL_DEBUG_ASSOC("supported HT rate 0x%X 0x%X 0x%X " + "rxon flags 0x%X operation mode :0x%X " + "extension channel offset 0x%x " + "control chan %d\n", + ht_info->supp_mcs_set[0], + ht_info->supp_mcs_set[1], + ht_info->supp_mcs_set[2], + le32_to_cpu(rxon->flags), ht_info->ht_protection, + ht_info->extension_chan_offset, + ht_info->control_channel); + return; +} +EXPORT_SYMBOL(iwl_set_rxon_ht); + +/* + * Determine how many receiver/antenna chains to use. + * More provides better reception via diversity. Fewer saves power. + * MIMO (dual stream) requires at least 2, but works better with 3. + * This does not determine *which* chains to use, just how many. + */ +static int iwlcore_get_rx_chain_counter(struct iwl_priv *priv, + u8 *idle_state, u8 *rx_state) +{ + u8 is_single = is_single_rx_stream(priv); + u8 is_cam = test_bit(STATUS_POWER_PMI, &priv->status) ? 0 : 1; + + /* # of Rx chains to use when expecting MIMO. */ + if (is_single || (!is_cam && (priv->ps_mode == IWL_MIMO_PS_STATIC))) + *rx_state = 2; + else + *rx_state = 3; + + /* # Rx chains when idling and maybe trying to save power */ + switch (priv->ps_mode) { + case IWL_MIMO_PS_STATIC: + case IWL_MIMO_PS_DYNAMIC: + *idle_state = (is_cam) ? 2 : 1; + break; + case IWL_MIMO_PS_NONE: + *idle_state = (is_cam) ? *rx_state : 1; + break; + default: + *idle_state = 1; + break; + } + + return 0; +} + +/** + * iwl_set_rxon_chain - Set up Rx chain usage in "staging" RXON image + * + * Selects how many and which Rx receivers/antennas/chains to use. + * This should not be used for scan command ... it puts data in wrong place. + */ +void iwl_set_rxon_chain(struct iwl_priv *priv) +{ + u8 is_single = is_single_rx_stream(priv); + u8 idle_state, rx_state; + + priv->staging_rxon.rx_chain = 0; + rx_state = idle_state = 3; + + /* Tell uCode which antennas are actually connected. + * Before first association, we assume all antennas are connected. + * Just after first association, iwl_chain_noise_calibration() + * checks which antennas actually *are* connected. */ + priv->staging_rxon.rx_chain |= + cpu_to_le16(priv->hw_params.valid_rx_ant << + RXON_RX_CHAIN_VALID_POS); + + /* How many receivers should we use? */ + iwlcore_get_rx_chain_counter(priv, &idle_state, &rx_state); + priv->staging_rxon.rx_chain |= + cpu_to_le16(rx_state << RXON_RX_CHAIN_MIMO_CNT_POS); + priv->staging_rxon.rx_chain |= + cpu_to_le16(idle_state << RXON_RX_CHAIN_CNT_POS); + + if (!is_single && (rx_state >= 2) && + !test_bit(STATUS_POWER_PMI, &priv->status)) + priv->staging_rxon.rx_chain |= RXON_RX_CHAIN_MIMO_FORCE_MSK; + else + priv->staging_rxon.rx_chain &= ~RXON_RX_CHAIN_MIMO_FORCE_MSK; + + IWL_DEBUG_ASSOC("rx chain %X\n", priv->staging_rxon.rx_chain); +} +EXPORT_SYMBOL(iwl_set_rxon_chain); /** * iwlcore_set_rxon_channel - Set the phymode and channel values in staging RXON @@ -188,7 +783,7 @@ EXPORT_SYMBOL(iwlcore_reset_qos); * NOTE: Does not commit to the hardware; it sets appropriate bit fields * in the staging RXON flag structure based on the phymode */ -int iwlcore_set_rxon_channel(struct iwl_priv *priv, +int iwl_set_rxon_channel(struct iwl_priv *priv, enum ieee80211_band band, u16 channel) { @@ -214,68 +809,185 @@ int iwlcore_set_rxon_channel(struct iwl_priv *priv, return 0; } -EXPORT_SYMBOL(iwlcore_set_rxon_channel); +EXPORT_SYMBOL(iwl_set_rxon_channel); -static void iwlcore_init_hw(struct iwl_priv *priv) +int iwl_setup_mac(struct iwl_priv *priv) { + int ret; struct ieee80211_hw *hw = priv->hw; hw->rate_control_algorithm = "iwl-4965-rs"; - /* Tell mac80211 and its clients (e.g. Wireless Extensions) - * the range of signal quality values that we'll provide. - * Negative values for level/noise indicate that we'll provide dBm. - * For WE, at least, non-0 values here *enable* display of values - * in app (iwconfig). */ - hw->max_rssi = -20; /* signal level, negative indicates dBm */ - hw->max_noise = -20; /* noise level, negative indicates dBm */ - hw->max_signal = 100; /* link quality indication (%) */ - - /* Tell mac80211 our Tx characteristics */ - hw->flags = IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE; - + /* Tell mac80211 our characteristics */ + hw->flags = IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE | + IEEE80211_HW_SIGNAL_DBM | + IEEE80211_HW_NOISE_DBM; /* Default value; 4 EDCA QOS priorities */ hw->queues = 4; -#ifdef CONFIG_IWL4965_HT - /* Enhanced value; more queues, to support 11n aggregation */ - hw->queues = 16; -#endif /* CONFIG_IWL4965_HT */ + /* queues to support 11n aggregation */ + if (priv->cfg->sku & IWL_SKU_N) + hw->ampdu_queues = priv->cfg->mod_params->num_of_ampdu_queues; + + hw->conf.beacon_int = 100; + + if (priv->bands[IEEE80211_BAND_2GHZ].n_channels) + priv->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = + &priv->bands[IEEE80211_BAND_2GHZ]; + if (priv->bands[IEEE80211_BAND_5GHZ].n_channels) + priv->hw->wiphy->bands[IEEE80211_BAND_5GHZ] = + &priv->bands[IEEE80211_BAND_5GHZ]; + + ret = ieee80211_register_hw(priv->hw); + if (ret) { + IWL_ERROR("Failed to register hw (error %d)\n", ret); + return ret; + } + priv->mac80211_registered = 1; + + return 0; } +EXPORT_SYMBOL(iwl_setup_mac); -int iwl_setup(struct iwl_priv *priv) +int iwl_set_hw_params(struct iwl_priv *priv) { - int ret = 0; - iwlcore_init_hw(priv); - ret = priv->cfg->ops->lib->init_drv(priv); - return ret; + priv->hw_params.sw_crypto = priv->cfg->mod_params->sw_crypto; + priv->hw_params.max_rxq_size = RX_QUEUE_SIZE; + priv->hw_params.max_rxq_log = RX_QUEUE_SIZE_LOG; + if (priv->cfg->mod_params->amsdu_size_8K) + priv->hw_params.rx_buf_size = IWL_RX_BUF_SIZE_8K; + else + priv->hw_params.rx_buf_size = IWL_RX_BUF_SIZE_4K; + priv->hw_params.max_pkt_size = priv->hw_params.rx_buf_size - 256; + + if (priv->cfg->mod_params->disable_11n) + priv->cfg->sku &= ~IWL_SKU_N; + + /* Device-specific setup */ + return priv->cfg->ops->lib->set_hw_params(priv); } -EXPORT_SYMBOL(iwl_setup); +EXPORT_SYMBOL(iwl_set_hw_params); -/* Low level driver call this function to update iwlcore with - * driver status. - */ -int iwlcore_low_level_notify(struct iwl_priv *priv, - enum iwlcore_card_notify notify) +int iwl_init_drv(struct iwl_priv *priv) { int ret; - switch (notify) { - case IWLCORE_INIT_EVT: - ret = iwl_rfkill_init(priv); - if (ret) - IWL_ERROR("Unable to initialize RFKILL system. " - "Ignoring error: %d\n", ret); - break; - case IWLCORE_START_EVT: - break; - case IWLCORE_STOP_EVT: - break; - case IWLCORE_REMOVE_EVT: - iwl_rfkill_unregister(priv); - break; + + priv->retry_rate = 1; + priv->ibss_beacon = NULL; + + spin_lock_init(&priv->lock); + spin_lock_init(&priv->power_data.lock); + spin_lock_init(&priv->sta_lock); + spin_lock_init(&priv->hcmd_lock); + spin_lock_init(&priv->lq_mngr.lock); + + INIT_LIST_HEAD(&priv->free_frames); + + mutex_init(&priv->mutex); + + /* Clear the driver's (not device's) station table */ + iwl_clear_stations_table(priv); + + priv->data_retry_limit = -1; + priv->ieee_channels = NULL; + priv->ieee_rates = NULL; + priv->band = IEEE80211_BAND_2GHZ; + + priv->iw_mode = IEEE80211_IF_TYPE_STA; + + priv->use_ant_b_for_management_frame = 1; /* start with ant B */ + priv->ps_mode = IWL_MIMO_PS_NONE; + + /* Choose which receivers/antennas to use */ + iwl_set_rxon_chain(priv); + iwl_init_scan_params(priv); + + if (priv->cfg->mod_params->enable_qos) + priv->qos_data.qos_enable = 1; + + iwl_reset_qos(priv); + + priv->qos_data.qos_active = 0; + priv->qos_data.qos_cap.val = 0; + + iwl_set_rxon_channel(priv, IEEE80211_BAND_2GHZ, 6); + + priv->rates_mask = IWL_RATES_MASK; + /* If power management is turned on, default to AC mode */ + priv->power_mode = IWL_POWER_AC; + priv->tx_power_user_lmt = IWL_TX_POWER_TARGET_POWER_MAX; + + ret = iwl_init_channel_map(priv); + if (ret) { + IWL_ERROR("initializing regulatory failed: %d\n", ret); + goto err; + } + + ret = iwlcore_init_geos(priv); + if (ret) { + IWL_ERROR("initializing geos failed: %d\n", ret); + goto err_free_channel_map; } return 0; + +err_free_channel_map: + iwl_free_channel_map(priv); +err: + return ret; +} +EXPORT_SYMBOL(iwl_init_drv); + +void iwl_free_calib_results(struct iwl_priv *priv) +{ + kfree(priv->calib_results.lo_res); + priv->calib_results.lo_res = NULL; + priv->calib_results.lo_res_len = 0; + + kfree(priv->calib_results.tx_iq_res); + priv->calib_results.tx_iq_res = NULL; + priv->calib_results.tx_iq_res_len = 0; + + kfree(priv->calib_results.tx_iq_perd_res); + priv->calib_results.tx_iq_perd_res = NULL; + priv->calib_results.tx_iq_perd_res_len = 0; +} +EXPORT_SYMBOL(iwl_free_calib_results); + +int iwl_set_tx_power(struct iwl_priv *priv, s8 tx_power, bool force) +{ + int ret = 0; + if (tx_power < IWL_TX_POWER_TARGET_POWER_MIN) { + IWL_WARNING("Requested user TXPOWER %d below limit.\n", + priv->tx_power_user_lmt); + return -EINVAL; + } + + if (tx_power > IWL_TX_POWER_TARGET_POWER_MAX) { + IWL_WARNING("Requested user TXPOWER %d above limit.\n", + priv->tx_power_user_lmt); + return -EINVAL; + } + + if (priv->tx_power_user_lmt != tx_power) + force = true; + + priv->tx_power_user_lmt = tx_power; + + if (force && priv->cfg->ops->lib->send_tx_power) + ret = priv->cfg->ops->lib->send_tx_power(priv); + + return ret; +} +EXPORT_SYMBOL(iwl_set_tx_power); + + +void iwl_uninit_drv(struct iwl_priv *priv) +{ + iwl_free_calib_results(priv); + iwlcore_free_geos(priv); + iwl_free_channel_map(priv); + kfree(priv->scan); } -EXPORT_SYMBOL(iwlcore_low_level_notify); +EXPORT_SYMBOL(iwl_uninit_drv); int iwl_send_statistics_request(struct iwl_priv *priv, u8 flags) { @@ -290,3 +1002,440 @@ int iwl_send_statistics_request(struct iwl_priv *priv, u8 flags) } EXPORT_SYMBOL(iwl_send_statistics_request); +/** + * iwl_verify_inst_sparse - verify runtime uCode image in card vs. host, + * using sample data 100 bytes apart. If these sample points are good, + * it's a pretty good bet that everything between them is good, too. + */ +static int iwlcore_verify_inst_sparse(struct iwl_priv *priv, __le32 *image, u32 len) +{ + u32 val; + int ret = 0; + u32 errcnt = 0; + u32 i; + + IWL_DEBUG_INFO("ucode inst image size is %u\n", len); + + ret = iwl_grab_nic_access(priv); + if (ret) + return ret; + + for (i = 0; i < len; i += 100, image += 100/sizeof(u32)) { + /* read data comes through single port, auto-incr addr */ + /* NOTE: Use the debugless read so we don't flood kernel log + * if IWL_DL_IO is set */ + iwl_write_direct32(priv, HBUS_TARG_MEM_RADDR, + i + RTC_INST_LOWER_BOUND); + val = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT); + if (val != le32_to_cpu(*image)) { + ret = -EIO; + errcnt++; + if (errcnt >= 3) + break; + } + } + + iwl_release_nic_access(priv); + + return ret; +} + +/** + * iwlcore_verify_inst_full - verify runtime uCode image in card vs. host, + * looking at all data. + */ +static int iwl_verify_inst_full(struct iwl_priv *priv, __le32 *image, + u32 len) +{ + u32 val; + u32 save_len = len; + int ret = 0; + u32 errcnt; + + IWL_DEBUG_INFO("ucode inst image size is %u\n", len); + + ret = iwl_grab_nic_access(priv); + if (ret) + return ret; + + iwl_write_direct32(priv, HBUS_TARG_MEM_RADDR, RTC_INST_LOWER_BOUND); + + errcnt = 0; + for (; len > 0; len -= sizeof(u32), image++) { + /* read data comes through single port, auto-incr addr */ + /* NOTE: Use the debugless read so we don't flood kernel log + * if IWL_DL_IO is set */ + val = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT); + if (val != le32_to_cpu(*image)) { + IWL_ERROR("uCode INST section is invalid at " + "offset 0x%x, is 0x%x, s/b 0x%x\n", + save_len - len, val, le32_to_cpu(*image)); + ret = -EIO; + errcnt++; + if (errcnt >= 20) + break; + } + } + + iwl_release_nic_access(priv); + + if (!errcnt) + IWL_DEBUG_INFO + ("ucode image in INSTRUCTION memory is good\n"); + + return ret; +} + +/** + * iwl_verify_ucode - determine which instruction image is in SRAM, + * and verify its contents + */ +int iwl_verify_ucode(struct iwl_priv *priv) +{ + __le32 *image; + u32 len; + int ret; + + /* Try bootstrap */ + image = (__le32 *)priv->ucode_boot.v_addr; + len = priv->ucode_boot.len; + ret = iwlcore_verify_inst_sparse(priv, image, len); + if (!ret) { + IWL_DEBUG_INFO("Bootstrap uCode is good in inst SRAM\n"); + return 0; + } + + /* Try initialize */ + image = (__le32 *)priv->ucode_init.v_addr; + len = priv->ucode_init.len; + ret = iwlcore_verify_inst_sparse(priv, image, len); + if (!ret) { + IWL_DEBUG_INFO("Initialize uCode is good in inst SRAM\n"); + return 0; + } + + /* Try runtime/protocol */ + image = (__le32 *)priv->ucode_code.v_addr; + len = priv->ucode_code.len; + ret = iwlcore_verify_inst_sparse(priv, image, len); + if (!ret) { + IWL_DEBUG_INFO("Runtime uCode is good in inst SRAM\n"); + return 0; + } + + IWL_ERROR("NO VALID UCODE IMAGE IN INSTRUCTION SRAM!!\n"); + + /* Since nothing seems to match, show first several data entries in + * instruction SRAM, so maybe visual inspection will give a clue. + * Selection of bootstrap image (vs. other images) is arbitrary. */ + image = (__le32 *)priv->ucode_boot.v_addr; + len = priv->ucode_boot.len; + ret = iwl_verify_inst_full(priv, image, len); + + return ret; +} +EXPORT_SYMBOL(iwl_verify_ucode); + + +static const char *desc_lookup(int i) +{ + switch (i) { + case 1: + return "FAIL"; + case 2: + return "BAD_PARAM"; + case 3: + return "BAD_CHECKSUM"; + case 4: + return "NMI_INTERRUPT"; + case 5: + return "SYSASSERT"; + case 6: + return "FATAL_ERROR"; + } + + return "UNKNOWN"; +} + +#define ERROR_START_OFFSET (1 * sizeof(u32)) +#define ERROR_ELEM_SIZE (7 * sizeof(u32)) + +void iwl_dump_nic_error_log(struct iwl_priv *priv) +{ + u32 data2, line; + u32 desc, time, count, base, data1; + u32 blink1, blink2, ilink1, ilink2; + int ret; + + if (priv->ucode_type == UCODE_INIT) + base = le32_to_cpu(priv->card_alive_init.error_event_table_ptr); + else + base = le32_to_cpu(priv->card_alive.error_event_table_ptr); + + if (!priv->cfg->ops->lib->is_valid_rtc_data_addr(base)) { + IWL_ERROR("Not valid error log pointer 0x%08X\n", base); + return; + } + + ret = iwl_grab_nic_access(priv); + if (ret) { + IWL_WARNING("Can not read from adapter at this time.\n"); + return; + } + + count = iwl_read_targ_mem(priv, base); + + if (ERROR_START_OFFSET <= count * ERROR_ELEM_SIZE) { + IWL_ERROR("Start IWL Error Log Dump:\n"); + IWL_ERROR("Status: 0x%08lX, count: %d\n", priv->status, count); + } + + desc = iwl_read_targ_mem(priv, base + 1 * sizeof(u32)); + blink1 = iwl_read_targ_mem(priv, base + 3 * sizeof(u32)); + blink2 = iwl_read_targ_mem(priv, base + 4 * sizeof(u32)); + ilink1 = iwl_read_targ_mem(priv, base + 5 * sizeof(u32)); + ilink2 = iwl_read_targ_mem(priv, base + 6 * sizeof(u32)); + data1 = iwl_read_targ_mem(priv, base + 7 * sizeof(u32)); + data2 = iwl_read_targ_mem(priv, base + 8 * sizeof(u32)); + line = iwl_read_targ_mem(priv, base + 9 * sizeof(u32)); + time = iwl_read_targ_mem(priv, base + 11 * sizeof(u32)); + + IWL_ERROR("Desc Time " + "data1 data2 line\n"); + IWL_ERROR("%-13s (#%d) %010u 0x%08X 0x%08X %u\n", + desc_lookup(desc), desc, time, data1, data2, line); + IWL_ERROR("blink1 blink2 ilink1 ilink2\n"); + IWL_ERROR("0x%05X 0x%05X 0x%05X 0x%05X\n", blink1, blink2, + ilink1, ilink2); + + iwl_release_nic_access(priv); +} +EXPORT_SYMBOL(iwl_dump_nic_error_log); + +#define EVENT_START_OFFSET (4 * sizeof(u32)) + +/** + * iwl_print_event_log - Dump error event log to syslog + * + * NOTE: Must be called with iwl4965_grab_nic_access() already obtained! + */ +void iwl_print_event_log(struct iwl_priv *priv, u32 start_idx, + u32 num_events, u32 mode) +{ + u32 i; + u32 base; /* SRAM byte address of event log header */ + u32 event_size; /* 2 u32s, or 3 u32s if timestamp recorded */ + u32 ptr; /* SRAM byte address of log data */ + u32 ev, time, data; /* event log data */ + + if (num_events == 0) + return; + if (priv->ucode_type == UCODE_INIT) + base = le32_to_cpu(priv->card_alive_init.log_event_table_ptr); + else + base = le32_to_cpu(priv->card_alive.log_event_table_ptr); + + if (mode == 0) + event_size = 2 * sizeof(u32); + else + event_size = 3 * sizeof(u32); + + ptr = base + EVENT_START_OFFSET + (start_idx * event_size); + + /* "time" is actually "data" for mode 0 (no timestamp). + * place event id # at far right for easier visual parsing. */ + for (i = 0; i < num_events; i++) { + ev = iwl_read_targ_mem(priv, ptr); + ptr += sizeof(u32); + time = iwl_read_targ_mem(priv, ptr); + ptr += sizeof(u32); + if (mode == 0) { + /* data, ev */ + IWL_ERROR("EVT_LOG:0x%08x:%04u\n", time, ev); + } else { + data = iwl_read_targ_mem(priv, ptr); + ptr += sizeof(u32); + IWL_ERROR("EVT_LOGT:%010u:0x%08x:%04u\n", + time, data, ev); + } + } +} +EXPORT_SYMBOL(iwl_print_event_log); + + +void iwl_dump_nic_event_log(struct iwl_priv *priv) +{ + int ret; + u32 base; /* SRAM byte address of event log header */ + u32 capacity; /* event log capacity in # entries */ + u32 mode; /* 0 - no timestamp, 1 - timestamp recorded */ + u32 num_wraps; /* # times uCode wrapped to top of log */ + u32 next_entry; /* index of next entry to be written by uCode */ + u32 size; /* # entries that we'll print */ + + if (priv->ucode_type == UCODE_INIT) + base = le32_to_cpu(priv->card_alive_init.log_event_table_ptr); + else + base = le32_to_cpu(priv->card_alive.log_event_table_ptr); + + if (!priv->cfg->ops->lib->is_valid_rtc_data_addr(base)) { + IWL_ERROR("Invalid event log pointer 0x%08X\n", base); + return; + } + + ret = iwl_grab_nic_access(priv); + if (ret) { + IWL_WARNING("Can not read from adapter at this time.\n"); + return; + } + + /* event log header */ + capacity = iwl_read_targ_mem(priv, base); + mode = iwl_read_targ_mem(priv, base + (1 * sizeof(u32))); + num_wraps = iwl_read_targ_mem(priv, base + (2 * sizeof(u32))); + next_entry = iwl_read_targ_mem(priv, base + (3 * sizeof(u32))); + + size = num_wraps ? capacity : next_entry; + + /* bail out if nothing in log */ + if (size == 0) { + IWL_ERROR("Start IWL Event Log Dump: nothing in log\n"); + iwl_release_nic_access(priv); + return; + } + + IWL_ERROR("Start IWL Event Log Dump: display count %d, wraps %d\n", + size, num_wraps); + + /* if uCode has wrapped back to top of log, start at the oldest entry, + * i.e the next one that uCode would fill. */ + if (num_wraps) + iwl_print_event_log(priv, next_entry, + capacity - next_entry, mode); + /* (then/else) start at top of log */ + iwl_print_event_log(priv, 0, next_entry, mode); + + iwl_release_nic_access(priv); +} +EXPORT_SYMBOL(iwl_dump_nic_event_log); + +void iwl_rf_kill_ct_config(struct iwl_priv *priv) +{ + struct iwl_ct_kill_config cmd; + unsigned long flags; + int ret = 0; + + spin_lock_irqsave(&priv->lock, flags); + iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, + CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT); + spin_unlock_irqrestore(&priv->lock, flags); + + cmd.critical_temperature_R = + cpu_to_le32(priv->hw_params.ct_kill_threshold); + + ret = iwl_send_cmd_pdu(priv, REPLY_CT_KILL_CONFIG_CMD, + sizeof(cmd), &cmd); + if (ret) + IWL_ERROR("REPLY_CT_KILL_CONFIG_CMD failed\n"); + else + IWL_DEBUG_INFO("REPLY_CT_KILL_CONFIG_CMD succeeded, " + "critical temperature is %d\n", + cmd.critical_temperature_R); +} +EXPORT_SYMBOL(iwl_rf_kill_ct_config); + +/* + * CARD_STATE_CMD + * + * Use: Sets the device's internal card state to enable, disable, or halt + * + * When in the 'enable' state the card operates as normal. + * When in the 'disable' state, the card enters into a low power mode. + * When in the 'halt' state, the card is shut down and must be fully + * restarted to come back on. + */ +static int iwl_send_card_state(struct iwl_priv *priv, u32 flags, u8 meta_flag) +{ + struct iwl_host_cmd cmd = { + .id = REPLY_CARD_STATE_CMD, + .len = sizeof(u32), + .data = &flags, + .meta.flags = meta_flag, + }; + + return iwl_send_cmd(priv, &cmd); +} + +void iwl_radio_kill_sw_disable_radio(struct iwl_priv *priv) +{ + unsigned long flags; + + if (test_bit(STATUS_RF_KILL_SW, &priv->status)) + return; + + IWL_DEBUG_RF_KILL("Manual SW RF KILL set to: RADIO OFF\n"); + + iwl_scan_cancel(priv); + /* FIXME: This is a workaround for AP */ + if (priv->iw_mode != IEEE80211_IF_TYPE_AP) { + spin_lock_irqsave(&priv->lock, flags); + iwl_write32(priv, CSR_UCODE_DRV_GP1_SET, + CSR_UCODE_SW_BIT_RFKILL); + spin_unlock_irqrestore(&priv->lock, flags); + /* call the host command only if no hw rf-kill set */ + if (!test_bit(STATUS_RF_KILL_HW, &priv->status) && + iwl_is_ready(priv)) + iwl_send_card_state(priv, + CARD_STATE_CMD_DISABLE, 0); + set_bit(STATUS_RF_KILL_SW, &priv->status); + /* make sure mac80211 stop sending Tx frame */ + if (priv->mac80211_registered) + ieee80211_stop_queues(priv->hw); + } +} +EXPORT_SYMBOL(iwl_radio_kill_sw_disable_radio); + +int iwl_radio_kill_sw_enable_radio(struct iwl_priv *priv) +{ + unsigned long flags; + + if (!test_bit(STATUS_RF_KILL_SW, &priv->status)) + return 0; + + IWL_DEBUG_RF_KILL("Manual SW RF KILL set to: RADIO ON\n"); + + spin_lock_irqsave(&priv->lock, flags); + iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL); + + /* If the driver is up it will receive CARD_STATE_NOTIFICATION + * notification where it will clear SW rfkill status. + * Setting it here would break the handler. Only if the + * interface is down we can set here since we don't + * receive any further notification. + */ + if (!priv->is_open) + clear_bit(STATUS_RF_KILL_SW, &priv->status); + spin_unlock_irqrestore(&priv->lock, flags); + + /* wake up ucode */ + msleep(10); + + spin_lock_irqsave(&priv->lock, flags); + iwl_read32(priv, CSR_UCODE_DRV_GP1); + if (!iwl_grab_nic_access(priv)) + iwl_release_nic_access(priv); + spin_unlock_irqrestore(&priv->lock, flags); + + if (test_bit(STATUS_RF_KILL_HW, &priv->status)) { + IWL_DEBUG_RF_KILL("Can not turn radio back on - " + "disabled by HW switch\n"); + return 0; + } + + /* If the driver is already loaded, it will receive + * CARD_STATE_NOTIFICATION notifications and the handler will + * call restart to reload the driver. + */ + return 1; +} +EXPORT_SYMBOL(iwl_radio_kill_sw_enable_radio); |