diff options
Diffstat (limited to 'drivers/regulator')
| -rw-r--r-- | drivers/regulator/wm8350-regulator.c | 91 |
1 files changed, 91 insertions, 0 deletions
diff --git a/drivers/regulator/wm8350-regulator.c b/drivers/regulator/wm8350-regulator.c index c68c496..7aa3524 100644 --- a/drivers/regulator/wm8350-regulator.c +++ b/drivers/regulator/wm8350-regulator.c @@ -1412,6 +1412,97 @@ int wm8350_register_regulator(struct wm8350 *wm8350, int reg, } EXPORT_SYMBOL_GPL(wm8350_register_regulator); +/** + * wm8350_register_led - Register a WM8350 LED output + * + * @param wm8350 The WM8350 device to configure. + * @param lednum LED device index to create. + * @param dcdc The DCDC to use for the LED. + * @param isink The ISINK to use for the LED. + * @param pdata Configuration for the LED. + * + * The WM8350 supports the use of an ISINK together with a DCDC to + * provide a power-efficient LED driver. This function registers the + * regulators and instantiates the platform device for a LED. The + * operating modes for the LED regulators must be configured using + * wm8350_isink_set_flash(), wm8350_dcdc25_set_mode() and + * wm8350_dcdc_set_slot() prior to calling this function. + */ +int wm8350_register_led(struct wm8350 *wm8350, int lednum, int dcdc, int isink, + struct wm8350_led_platform_data *pdata) +{ + struct wm8350_led *led; + struct platform_device *pdev; + int ret; + + if (lednum > ARRAY_SIZE(wm8350->pmic.led) || lednum < 0) { + dev_err(wm8350->dev, "Invalid LED index %d\n", lednum); + return -ENODEV; + } + + led = &wm8350->pmic.led[lednum]; + + if (led->pdev) { + dev_err(wm8350->dev, "LED %d already allocated\n", lednum); + return -EINVAL; + } + + pdev = platform_device_alloc("wm8350-led", lednum); + if (pdev == NULL) { + dev_err(wm8350->dev, "Failed to allocate LED %d\n", lednum); + return -ENOMEM; + } + + led->isink_consumer.dev = &pdev->dev; + led->isink_consumer.supply = "led_isink"; + led->isink_init.num_consumer_supplies = 1; + led->isink_init.consumer_supplies = &led->isink_consumer; + led->isink_init.constraints.min_uA = 0; + led->isink_init.constraints.max_uA = pdata->max_uA; + led->isink_init.constraints.valid_ops_mask = REGULATOR_CHANGE_CURRENT; + led->isink_init.constraints.valid_modes_mask = REGULATOR_MODE_NORMAL; + ret = wm8350_register_regulator(wm8350, isink, &led->isink_init); + if (ret != 0) { + platform_device_put(pdev); + return ret; + } + + led->dcdc_consumer.dev = &pdev->dev; + led->dcdc_consumer.supply = "led_vcc"; + led->dcdc_init.num_consumer_supplies = 1; + led->dcdc_init.consumer_supplies = &led->dcdc_consumer; + led->dcdc_init.constraints.valid_modes_mask = REGULATOR_MODE_NORMAL; + ret = wm8350_register_regulator(wm8350, dcdc, &led->dcdc_init); + if (ret != 0) { + platform_device_put(pdev); + return ret; + } + + switch (isink) { + case WM8350_ISINK_A: + wm8350->pmic.isink_A_dcdc = dcdc; + break; + case WM8350_ISINK_B: + wm8350->pmic.isink_B_dcdc = dcdc; + break; + } + + pdev->dev.platform_data = pdata; + pdev->dev.parent = wm8350->dev; + ret = platform_device_add(pdev); + if (ret != 0) { + dev_err(wm8350->dev, "Failed to register LED %d: %d\n", + lednum, ret); + platform_device_put(pdev); + return ret; + } + + led->pdev = pdev; + + return 0; +} +EXPORT_SYMBOL_GPL(wm8350_register_led); + static struct platform_driver wm8350_regulator_driver = { .probe = wm8350_regulator_probe, .remove = wm8350_regulator_remove, |