diff options
Diffstat (limited to 'drivers/s390/net/iucv.h')
| -rw-r--r-- | drivers/s390/net/iucv.h | 622 |
1 files changed, 311 insertions, 311 deletions
diff --git a/drivers/s390/net/iucv.h b/drivers/s390/net/iucv.h index 0c4644d..5b6b1b7 100644 --- a/drivers/s390/net/iucv.h +++ b/drivers/s390/net/iucv.h @@ -4,7 +4,7 @@ * * S390 version * Copyright (C) 2000 IBM Corporation - * Author(s):Alan Altmark (Alan_Altmark@us.ibm.com) + * Author(s):Alan Altmark (Alan_Altmark@us.ibm.com) * Xenia Tkatschow (xenia@us.ibm.com) * * @@ -16,17 +16,17 @@ * CP Programming Services book, also available on the web * thru www.ibm.com/s390/vm/pubs, manual # SC24-5760 * - * Definition of Return Codes - * -All positive return codes including zero are reflected back - * from CP except for iucv_register_program. The definition of each - * return code can be found in CP Programming Services book. - * Also available on the web thru www.ibm.com/s390/vm/pubs, manual # SC24-5760 - * - Return Code of: - * (-EINVAL) Invalid value - * (-ENOMEM) storage allocation failed + * Definition of Return Codes + * -All positive return codes including zero are reflected back + * from CP except for iucv_register_program. The definition of each + * return code can be found in CP Programming Services book. + * Also available on the web thru www.ibm.com/s390/vm/pubs, manual # SC24-5760 + * - Return Code of: + * (-EINVAL) Invalid value + * (-ENOMEM) storage allocation failed * pgmask defined in iucv_register_program will be set depending on input - * paramters. - * + * paramters. + * */ #include <linux/types.h> @@ -124,13 +124,13 @@ iucv_hex_dump(unsigned char *buf, size_t len) #define iucv_handle_t void * /* flags1: - * All flags are defined in the field IPFLAGS1 of each function - * and can be found in CP Programming Services. - * IPLOCAL - Indicates the connect can only be satisfied on the - * local system - * IPPRTY - Indicates a priority message - * IPQUSCE - Indicates you do not want to receive messages on a - * path until an iucv_resume is issued + * All flags are defined in the field IPFLAGS1 of each function + * and can be found in CP Programming Services. + * IPLOCAL - Indicates the connect can only be satisfied on the + * local system + * IPPRTY - Indicates a priority message + * IPQUSCE - Indicates you do not want to receive messages on a + * path until an iucv_resume is issued * IPRMDATA - Indicates that the message is in the parameter list */ #define IPLOCAL 0x01 @@ -154,14 +154,14 @@ iucv_hex_dump(unsigned char *buf, size_t len) #define AllInterrupts 0xf8 /* * Mapping of external interrupt buffers should be used with the corresponding - * interrupt types. - * Names: iucv_ConnectionPending -> connection pending + * interrupt types. + * Names: iucv_ConnectionPending -> connection pending * iucv_ConnectionComplete -> connection complete - * iucv_ConnectionSevered -> connection severed - * iucv_ConnectionQuiesced -> connection quiesced - * iucv_ConnectionResumed -> connection resumed - * iucv_MessagePending -> message pending - * iucv_MessageComplete -> message complete + * iucv_ConnectionSevered -> connection severed + * iucv_ConnectionQuiesced -> connection quiesced + * iucv_ConnectionResumed -> connection resumed + * iucv_MessagePending -> message pending + * iucv_MessageComplete -> message complete */ typedef struct { u16 ippathid; @@ -260,16 +260,16 @@ typedef struct { uchar res2[3]; } iucv_MessageComplete; -/* - * iucv_interrupt_ops_t: Is a vector of functions that handle - * IUCV interrupts. - * Parameter list: - * eib - is a pointer to a 40-byte area described - * with one of the structures above. - * pgm_data - this data is strictly for the - * interrupt handler that is passed by - * the application. This may be an address - * or token. +/* + * iucv_interrupt_ops_t: Is a vector of functions that handle + * IUCV interrupts. + * Parameter list: + * eib - is a pointer to a 40-byte area described + * with one of the structures above. + * pgm_data - this data is strictly for the + * interrupt handler that is passed by + * the application. This may be an address + * or token. */ typedef struct { void (*ConnectionPending) (iucv_ConnectionPending * eib, @@ -287,8 +287,8 @@ typedef struct { } iucv_interrupt_ops_t; /* - *iucv_array_t : Defines buffer array. - * Inside the array may be 31- bit addresses and 31-bit lengths. + *iucv_array_t : Defines buffer array. + * Inside the array may be 31- bit addresses and 31-bit lengths. */ typedef struct { u32 address; @@ -299,19 +299,19 @@ extern struct bus_type iucv_bus; extern struct device *iucv_root; /* -prototypes- */ -/* - * Name: iucv_register_program - * Purpose: Registers an application with IUCV - * Input: prmname - user identification +/* + * Name: iucv_register_program + * Purpose: Registers an application with IUCV + * Input: prmname - user identification * userid - machine identification * pgmmask - indicates which bits in the prmname and userid combined will be * used to determine who is given control - * ops - address of vector of interrupt handlers - * pgm_data- application data passed to interrupt handlers - * Output: NA - * Return: address of handler + * ops - address of vector of interrupt handlers + * pgm_data- application data passed to interrupt handlers + * Output: NA + * Return: address of handler * (0) - Error occurred, registration not completed. - * NOTE: Exact cause of failure will be recorded in syslog. + * NOTE: Exact cause of failure will be recorded in syslog. */ iucv_handle_t iucv_register_program (uchar pgmname[16], uchar userid[8], @@ -319,13 +319,13 @@ iucv_handle_t iucv_register_program (uchar pgmname[16], iucv_interrupt_ops_t * ops, void *pgm_data); -/* - * Name: iucv_unregister_program - * Purpose: Unregister application with IUCV - * Input: address of handler - * Output: NA - * Return: (0) - Normal return - * (-EINVAL) - Internal error, wild pointer +/* + * Name: iucv_unregister_program + * Purpose: Unregister application with IUCV + * Input: address of handler + * Output: NA + * Return: (0) - Normal return + * (-EINVAL) - Internal error, wild pointer */ int iucv_unregister_program (iucv_handle_t handle); @@ -333,7 +333,7 @@ int iucv_unregister_program (iucv_handle_t handle); * Name: iucv_accept * Purpose: This function is issued after the user receives a Connection Pending external * interrupt and now wishes to complete the IUCV communication path. - * Input: pathid - u16 , Path identification number + * Input: pathid - u16 , Path identification number * msglim_reqstd - u16, The number of outstanding messages requested. * user_data - uchar[16], Data specified by the iucv_connect function. * flags1 - int, Contains options for this path. @@ -358,34 +358,34 @@ int iucv_accept (u16 pathid, void *pgm_data, int *flags1_out, u16 * msglim); /* - * Name: iucv_connect + * Name: iucv_connect * Purpose: This function establishes an IUCV path. Although the connect may complete - * successfully, you are not able to use the path until you receive an IUCV - * Connection Complete external interrupt. - * Input: pathid - u16 *, Path identification number - * msglim_reqstd - u16, Number of outstanding messages requested - * user_data - uchar[16], 16-byte user data + * successfully, you are not able to use the path until you receive an IUCV + * Connection Complete external interrupt. + * Input: pathid - u16 *, Path identification number + * msglim_reqstd - u16, Number of outstanding messages requested + * user_data - uchar[16], 16-byte user data * userid - uchar[8], User identification - * system_name - uchar[8], 8-byte identifying the system name + * system_name - uchar[8], 8-byte identifying the system name * flags1 - int, Contains options for this path. * -IPPRTY - 0x20, Specifies if you want to send priority message. * -IPRMDATA - 0x80, Specifies whether your program can handle a message * in the parameter list. - * -IPQUSCE - 0x40, Specifies whether you want to quiesce the path being + * -IPQUSCE - 0x40, Specifies whether you want to quiesce the path being * established. - * -IPLOCAL - 0X01, Allows an application to force the partner to be on + * -IPLOCAL - 0X01, Allows an application to force the partner to be on * the local system. If local is specified then target class cannot be - * specified. + * specified. * flags1_out - int * Contains information about the path * - IPPRTY - 0x20, Indicates you may send priority messages. * msglim - * u16, Number of outstanding messages - * handle - iucv_handle_t, Address of handler - * pgm_data - void *, Application data passed to interrupt handlers + * handle - iucv_handle_t, Address of handler + * pgm_data - void *, Application data passed to interrupt handlers * Output: return code from CP IUCV call * rc - return code from iucv_declare_buffer - * -EINVAL - Invalid handle passed by application - * -EINVAL - Pathid address is NULL - * add_pathid_result - Return code from internal function add_pathid + * -EINVAL - Invalid handle passed by application + * -EINVAL - Pathid address is NULL + * add_pathid_result - Return code from internal function add_pathid */ int iucv_connect (u16 * pathid, @@ -397,16 +397,16 @@ int int *flags1_out, u16 * msglim, iucv_handle_t handle, void *pgm_data); -/* - * Name: iucv_purge - * Purpose: This function cancels a message that you have sent. - * Input: pathid - Path identification number. +/* + * Name: iucv_purge + * Purpose: This function cancels a message that you have sent. + * Input: pathid - Path identification number. * msgid - Specifies the message ID of the message to be purged. - * srccls - Specifies the source message class. - * Output: audit - Contains information about asynchronous error - * that may have affected the normal completion - * of this message. - * Return: Return code from CP IUCV call. + * srccls - Specifies the source message class. + * Output: audit - Contains information about asynchronous error + * that may have affected the normal completion + * of this message. + * Return: Return code from CP IUCV call. */ int iucv_purge (u16 pathid, u32 msgid, u32 srccls, __u32 *audit); /* @@ -426,38 +426,38 @@ ulong iucv_query_maxconn (void); */ ulong iucv_query_bufsize (void); -/* - * Name: iucv_quiesce - * Purpose: This function temporarily suspends incoming messages on an - * IUCV path. You can later reactivate the path by invoking - * the iucv_resume function. - * Input: pathid - Path identification number - * user_data - 16-bytes of user data - * Output: NA - * Return: Return code from CP IUCV call. +/* + * Name: iucv_quiesce + * Purpose: This function temporarily suspends incoming messages on an + * IUCV path. You can later reactivate the path by invoking + * the iucv_resume function. + * Input: pathid - Path identification number + * user_data - 16-bytes of user data + * Output: NA + * Return: Return code from CP IUCV call. */ int iucv_quiesce (u16 pathid, uchar user_data[16]); -/* - * Name: iucv_receive - * Purpose: This function receives messages that are being sent to you +/* + * Name: iucv_receive + * Purpose: This function receives messages that are being sent to you * over established paths. Data will be returned in buffer for length of * buflen. - * Input: - * pathid - Path identification number. - * buffer - Address of buffer to receive. - * buflen - Length of buffer to receive. - * msgid - Specifies the message ID. - * trgcls - Specifies target class. - * Output: + * Input: + * pathid - Path identification number. + * buffer - Address of buffer to receive. + * buflen - Length of buffer to receive. + * msgid - Specifies the message ID. + * trgcls - Specifies target class. + * Output: * flags1_out: int *, Contains information about this path. * IPNORPY - 0x10 Specifies this is a one-way message and no reply is - * expected. - * IPPRTY - 0x20 Specifies if you want to send priority message. + * expected. + * IPPRTY - 0x20 Specifies if you want to send priority message. * IPRMDATA - 0x80 specifies the data is contained in the parameter list * residual_buffer - address of buffer updated by the number * of bytes you have received. - * residual_length - + * residual_length - * Contains one of the following values, if the receive buffer is: * The same length as the message, this field is zero. * Longer than the message, this field contains the number of @@ -466,8 +466,8 @@ int iucv_quiesce (u16 pathid, uchar user_data[16]); * count (that is, the number of bytes remaining in the * message that does not fit into the buffer. In this * case b2f0_result = 5. - * Return: Return code from CP IUCV call. - * (-EINVAL) - buffer address is pointing to NULL + * Return: Return code from CP IUCV call. + * (-EINVAL) - buffer address is pointing to NULL */ int iucv_receive (u16 pathid, u32 msgid, @@ -477,16 +477,16 @@ int iucv_receive (u16 pathid, int *flags1_out, ulong * residual_buffer, ulong * residual_length); - /* - * Name: iucv_receive_array - * Purpose: This function receives messages that are being sent to you + /* + * Name: iucv_receive_array + * Purpose: This function receives messages that are being sent to you * over established paths. Data will be returned in first buffer for * length of first buffer. - * Input: pathid - Path identification number. + * Input: pathid - Path identification number. * msgid - specifies the message ID. * trgcls - Specifies target class. - * buffer - Address of array of buffers. - * buflen - Total length of buffers. + * buffer - Address of array of buffers. + * buflen - Total length of buffers. * Output: * flags1_out: int *, Contains information about this path. * IPNORPY - 0x10 Specifies this is a one-way message and no reply is @@ -504,8 +504,8 @@ int iucv_receive (u16 pathid, * count (that is, the number of bytes remaining in the * message that does not fit into the buffer. In this * case b2f0_result = 5. - * Return: Return code from CP IUCV call. - * (-EINVAL) - Buffer address is NULL. + * Return: Return code from CP IUCV call. + * (-EINVAL) - Buffer address is NULL. */ int iucv_receive_array (u16 pathid, u32 msgid, @@ -515,44 +515,44 @@ int iucv_receive_array (u16 pathid, int *flags1_out, ulong * residual_buffer, ulong * residual_length); -/* - * Name: iucv_reject - * Purpose: The reject function refuses a specified message. Between the - * time you are notified of a message and the time that you - * complete the message, the message may be rejected. - * Input: pathid - Path identification number. - * msgid - Specifies the message ID. - * trgcls - Specifies target class. - * Output: NA - * Return: Return code from CP IUCV call. +/* + * Name: iucv_reject + * Purpose: The reject function refuses a specified message. Between the + * time you are notified of a message and the time that you + * complete the message, the message may be rejected. + * Input: pathid - Path identification number. + * msgid - Specifies the message ID. + * trgcls - Specifies target class. + * Output: NA + * Return: Return code from CP IUCV call. */ int iucv_reject (u16 pathid, u32 msgid, u32 trgcls); -/* - * Name: iucv_reply - * Purpose: This function responds to the two-way messages that you - * receive. You must identify completely the message to - * which you wish to reply. ie, pathid, msgid, and trgcls. - * Input: pathid - Path identification number. - * msgid - Specifies the message ID. - * trgcls - Specifies target class. +/* + * Name: iucv_reply + * Purpose: This function responds to the two-way messages that you + * receive. You must identify completely the message to + * which you wish to reply. ie, pathid, msgid, and trgcls. + * Input: pathid - Path identification number. + * msgid - Specifies the message ID. + * trgcls - Specifies target class. * flags1 - Option for path. - * IPPRTY- 0x20, Specifies if you want to send priority message. - * buffer - Address of reply buffer. - * buflen - Length of reply buffer. - * Output: residual_buffer - Address of buffer updated by the number - * of bytes you have moved. + * IPPRTY- 0x20, Specifies if you want to send priority message. + * buffer - Address of reply buffer. + * buflen - Length of reply buffer. + * Output: residual_buffer - Address of buffer updated by the number + * of bytes you have moved. * residual_length - Contains one of the following values: * If the answer buffer is the same length as the reply, this field * contains zero. * If the answer buffer is longer than the reply, this field contains - * the number of bytes remaining in the buffer. + * the number of bytes remaining in the buffer. * If the answer buffer is shorter than the reply, this field contains * a residual count (that is, the number of bytes remianing in the * reply that does not fit into the buffer. In this * case b2f0_result = 5. - * Return: Return code from CP IUCV call. - * (-EINVAL) - Buffer address is NULL. + * Return: Return code from CP IUCV call. + * (-EINVAL) - Buffer address is NULL. */ int iucv_reply (u16 pathid, u32 msgid, @@ -561,20 +561,20 @@ int iucv_reply (u16 pathid, void *buffer, ulong buflen, ulong * residual_buffer, ulong * residual_length); -/* - * Name: iucv_reply_array - * Purpose: This function responds to the two-way messages that you - * receive. You must identify completely the message to - * which you wish to reply. ie, pathid, msgid, and trgcls. - * The array identifies a list of addresses and lengths of - * discontiguous buffers that contains the reply data. - * Input: pathid - Path identification number - * msgid - Specifies the message ID. - * trgcls - Specifies target class. +/* + * Name: iucv_reply_array + * Purpose: This function responds to the two-way messages that you + * receive. You must identify completely the message to + * which you wish to reply. ie, pathid, msgid, and trgcls. + * The array identifies a list of addresses and lengths of + * discontiguous buffers that contains the reply data. + * Input: pathid - Path identification number + * msgid - Specifies the message ID. + * trgcls - Specifies target class. * flags1 - Option for path. * IPPRTY- 0x20, Specifies if you want to send priority message. - * buffer - Address of array of reply buffers. - * buflen - Total length of reply buffers. + * buffer - Address of array of reply buffers. + * buflen - Total length of reply buffers. * Output: residual_buffer - Address of buffer which IUCV is currently working on. * residual_length - Contains one of the following values: * If the answer buffer is the same length as the reply, this field @@ -585,8 +585,8 @@ int iucv_reply (u16 pathid, * a residual count (that is, the number of bytes remianing in the * reply that does not fit into the buffer. In this * case b2f0_result = 5. - * Return: Return code from CP IUCV call. - * (-EINVAL) - Buffer address is NULL. + * Return: Return code from CP IUCV call. + * (-EINVAL) - Buffer address is NULL. */ int iucv_reply_array (u16 pathid, u32 msgid, @@ -596,77 +596,77 @@ int iucv_reply_array (u16 pathid, ulong buflen, ulong * residual_address, ulong * residual_length); -/* - * Name: iucv_reply_prmmsg - * Purpose: This function responds to the two-way messages that you - * receive. You must identify completely the message to - * which you wish to reply. ie, pathid, msgid, and trgcls. - * Prmmsg signifies the data is moved into the - * parameter list. - * Input: pathid - Path identification number. - * msgid - Specifies the message ID. - * trgcls - Specifies target class. +/* + * Name: iucv_reply_prmmsg + * Purpose: This function responds to the two-way messages that you + * receive. You must identify completely the message to + * which you wish to reply. ie, pathid, msgid, and trgcls. + * Prmmsg signifies the data is moved into the + * parameter list. + * Input: pathid - Path identification number. + * msgid - Specifies the message ID. + * trgcls - Specifies target class. * flags1 - Option for path. * IPPRTY- 0x20 Specifies if you want to send priority message. - * prmmsg - 8-bytes of data to be placed into the parameter. - * list. - * Output: NA - * Return: Return code from CP IUCV call. + * prmmsg - 8-bytes of data to be placed into the parameter. + * list. + * Output: NA + * Return: Return code from CP IUCV call. */ int iucv_reply_prmmsg (u16 pathid, u32 msgid, u32 trgcls, int flags1, uchar prmmsg[8]); -/* - * Name: iucv_resume - * Purpose: This function restores communications over a quiesced path - * Input: pathid - Path identification number. - * user_data - 16-bytes of user data. - * Output: NA - * Return: Return code from CP IUCV call. +/* + * Name: iucv_resume + * Purpose: This function restores communications over a quiesced path + * Input: pathid - Path identification number. + * user_data - 16-bytes of user data. + * Output: NA + * Return: Return code from CP IUCV call. */ int iucv_resume (u16 pathid, uchar user_data[16]); -/* - * Name: iucv_send - * Purpose: This function transmits data to another application. - * Data to be transmitted is in a buffer and this is a - * one-way message and the receiver will not reply to the - * message. - * Input: pathid - Path identification number. - * trgcls - Specifies target class. - * srccls - Specifies the source message class. - * msgtag - Specifies a tag to be associated with the message. +/* + * Name: iucv_send + * Purpose: This function transmits data to another application. + * Data to be transmitted is in a buffer and this is a + * one-way message and the receiver will not reply to the + * message. + * Input: pathid - Path identification number. + * trgcls - Specifies target class. + * srccls - Specifies the source message class. + * msgtag - Specifies a tag to be associated with the message. * flags1 - Option for path. * IPPRTY- 0x20 Specifies if you want to send priority message. - * buffer - Address of send buffer. - * buflen - Length of send buffer. - * Output: msgid - Specifies the message ID. - * Return: Return code from CP IUCV call. - * (-EINVAL) - Buffer address is NULL. + * buffer - Address of send buffer. + * buflen - Length of send buffer. + * Output: msgid - Specifies the message ID. + * Return: Return code from CP IUCV call. + * (-EINVAL) - Buffer address is NULL. */ int iucv_send (u16 pathid, u32 * msgid, u32 trgcls, u32 srccls, u32 msgtag, int flags1, void *buffer, ulong buflen); -/* - * Name: iucv_send_array - * Purpose: This function transmits data to another application. - * The contents of buffer is the address of the array of - * addresses and lengths of discontiguous buffers that hold - * the message text. This is a one-way message and the - * receiver will not reply to the message. - * Input: pathid - Path identification number. - * trgcls - Specifies target class. - * srccls - Specifies the source message class. +/* + * Name: iucv_send_array + * Purpose: This function transmits data to another application. + * The contents of buffer is the address of the array of + * addresses and lengths of discontiguous buffers that hold + * the message text. This is a one-way message and the + * receiver will not reply to the message. + * Input: pathid - Path identification number. + * trgcls - Specifies target class. + * srccls - Specifies the source message class. * msgtag - Specifies a tag to be associated witht the message. * flags1 - Option for path. - * IPPRTY- specifies if you want to send priority message. - * buffer - Address of array of send buffers. - * buflen - Total length of send buffers. - * Output: msgid - Specifies the message ID. - * Return: Return code from CP IUCV call. - * (-EINVAL) - Buffer address is NULL. + * IPPRTY- specifies if you want to send priority message. + * buffer - Address of array of send buffers. + * buflen - Total length of send buffers. + * Output: msgid - Specifies the message ID. + * Return: Return code from CP IUCV call. + * (-EINVAL) - Buffer address is NULL. */ int iucv_send_array (u16 pathid, u32 * msgid, @@ -675,48 +675,48 @@ int iucv_send_array (u16 pathid, u32 msgtag, int flags1, iucv_array_t * buffer, ulong buflen); -/* - * Name: iucv_send_prmmsg - * Purpose: This function transmits data to another application. - * Prmmsg specifies that the 8-bytes of data are to be moved - * into the parameter list. This is a one-way message and the - * receiver will not reply to the message. - * Input: pathid - Path identification number. - * trgcls - Specifies target class. - * srccls - Specifies the source message class. - * msgtag - Specifies a tag to be associated with the message. +/* + * Name: iucv_send_prmmsg + * Purpose: This function transmits data to another application. + * Prmmsg specifies that the 8-bytes of data are to be moved + * into the parameter list. This is a one-way message and the + * receiver will not reply to the message. + * Input: pathid - Path identification number. + * trgcls - Specifies target class. + * srccls - Specifies the source message class. + * msgtag - Specifies a tag to be associated with the message. * flags1 - Option for path. * IPPRTY- 0x20 specifies if you want to send priority message. - * prmmsg - 8-bytes of data to be placed into parameter list. - * Output: msgid - Specifies the message ID. - * Return: Return code from CP IUCV call. + * prmmsg - 8-bytes of data to be placed into parameter list. + * Output: msgid - Specifies the message ID. + * Return: Return code from CP IUCV call. */ int iucv_send_prmmsg (u16 pathid, u32 * msgid, u32 trgcls, u32 srccls, u32 msgtag, int flags1, uchar prmmsg[8]); -/* - * Name: iucv_send2way - * Purpose: This function transmits data to another application. - * Data to be transmitted is in a buffer. The receiver - * of the send is expected to reply to the message and - * a buffer is provided into which IUCV moves the reply - * to this message. - * Input: pathid - Path identification number. - * trgcls - Specifies target class. - * srccls - Specifies the source message class. - * msgtag - Specifies a tag associated with the message. +/* + * Name: iucv_send2way + * Purpose: This function transmits data to another application. + * Data to be transmitted is in a buffer. The receiver + * of the send is expected to reply to the message and + * a buffer is provided into which IUCV moves the reply + * to this message. + * Input: pathid - Path identification number. + * trgcls - Specifies target class. + * srccls - Specifies the source message class. + * msgtag - Specifies a tag associated with the message. * flags1 - Option for path. * IPPRTY- 0x20 Specifies if you want to send priority message. - * buffer - Address of send buffer. - * buflen - Length of send buffer. - * ansbuf - Address of buffer into which IUCV moves the reply of - * this message. - * anslen - Address of length of buffer. - * Output: msgid - Specifies the message ID. - * Return: Return code from CP IUCV call. - * (-EINVAL) - Buffer or ansbuf address is NULL. + * buffer - Address of send buffer. + * buflen - Length of send buffer. + * ansbuf - Address of buffer into which IUCV moves the reply of + * this message. + * anslen - Address of length of buffer. + * Output: msgid - Specifies the message ID. + * Return: Return code from CP IUCV call. + * (-EINVAL) - Buffer or ansbuf address is NULL. */ int iucv_send2way (u16 pathid, u32 * msgid, @@ -726,28 +726,28 @@ int iucv_send2way (u16 pathid, int flags1, void *buffer, ulong buflen, void *ansbuf, ulong anslen); -/* - * Name: iucv_send2way_array - * Purpose: This function transmits data to another application. - * The contents of buffer is the address of the array of - * addresses and lengths of discontiguous buffers that hold - * the message text. The receiver of the send is expected to - * reply to the message and a buffer is provided into which - * IUCV moves the reply to this message. - * Input: pathid - Path identification number. - * trgcls - Specifies target class. - * srccls - Specifies the source message class. - * msgtag - Specifies a tag to be associated with the message. +/* + * Name: iucv_send2way_array + * Purpose: This function transmits data to another application. + * The contents of buffer is the address of the array of + * addresses and lengths of discontiguous buffers that hold + * the message text. The receiver of the send is expected to + * reply to the message and a buffer is provided into which + * IUCV moves the reply to this message. + * Input: pathid - Path identification number. + * trgcls - Specifies target class. + * srccls - Specifies the source message class. + * msgtag - Specifies a tag to be associated with the message. * flags1 - Option for path. * IPPRTY- 0x20 Specifies if you want to send priority message. - * buffer - Sddress of array of send buffers. - * buflen - Total length of send buffers. - * ansbuf - Address of array of buffer into which IUCV moves the reply - * of this message. - * anslen - Address of length reply buffers. - * Output: msgid - Specifies the message ID. - * Return: Return code from CP IUCV call. - * (-EINVAL) - Buffer address is NULL. + * buffer - Sddress of array of send buffers. + * buflen - Total length of send buffers. + * ansbuf - Address of array of buffer into which IUCV moves the reply + * of this message. + * anslen - Address of length reply buffers. + * Output: msgid - Specifies the message ID. + * Return: Return code from CP IUCV call. + * (-EINVAL) - Buffer address is NULL. */ int iucv_send2way_array (u16 pathid, u32 * msgid, @@ -758,27 +758,27 @@ int iucv_send2way_array (u16 pathid, iucv_array_t * buffer, ulong buflen, iucv_array_t * ansbuf, ulong anslen); -/* - * Name: iucv_send2way_prmmsg - * Purpose: This function transmits data to another application. - * Prmmsg specifies that the 8-bytes of data are to be moved - * into the parameter list. This is a two-way message and the - * receiver of the message is expected to reply. A buffer - * is provided into which IUCV moves the reply to this - * message. - * Input: pathid - Rath identification number. - * trgcls - Specifies target class. - * srccls - Specifies the source message class. - * msgtag - Specifies a tag to be associated with the message. +/* + * Name: iucv_send2way_prmmsg + * Purpose: This function transmits data to another application. + * Prmmsg specifies that the 8-bytes of data are to be moved + * into the parameter list. This is a two-way message and the + * receiver of the message is expected to reply. A buffer + * is provided into which IUCV moves the reply to this + * message. + * Input: pathid - Rath identification number. + * trgcls - Specifies target class. + * srccls - Specifies the source message class. + * msgtag - Specifies a tag to be associated with the message. * flags1 - Option for path. * IPPRTY- 0x20 Specifies if you want to send priority message. - * prmmsg - 8-bytes of data to be placed in parameter list. - * ansbuf - Address of buffer into which IUCV moves the reply of + * prmmsg - 8-bytes of data to be placed in parameter list. + * ansbuf - Address of buffer into which IUCV moves the reply of * this message. - * anslen - Address of length of buffer. - * Output: msgid - Specifies the message ID. - * Return: Return code from CP IUCV call. - * (-EINVAL) - Buffer address is NULL. + * anslen - Address of length of buffer. + * Output: msgid - Specifies the message ID. + * Return: Return code from CP IUCV call. + * (-EINVAL) - Buffer address is NULL. */ int iucv_send2way_prmmsg (u16 pathid, u32 * msgid, @@ -788,29 +788,29 @@ int iucv_send2way_prmmsg (u16 pathid, ulong flags1, uchar prmmsg[8], void *ansbuf, ulong anslen); -/* - * Name: iucv_send2way_prmmsg_array - * Purpose: This function transmits data to another application. - * Prmmsg specifies that the 8-bytes of data are to be moved - * into the parameter list. This is a two-way message and the - * receiver of the message is expected to reply. A buffer - * is provided into which IUCV moves the reply to this - * message. The contents of ansbuf is the address of the - * array of addresses and lengths of discontiguous buffers - * that contain the reply. - * Input: pathid - Path identification number. - * trgcls - Specifies target class. - * srccls - Specifies the source message class. - * msgtag - Specifies a tag to be associated with the message. +/* + * Name: iucv_send2way_prmmsg_array + * Purpose: This function transmits data to another application. + * Prmmsg specifies that the 8-bytes of data are to be moved + * into the parameter list. This is a two-way message and the + * receiver of the message is expected to reply. A buffer + * is provided into which IUCV moves the reply to this + * message. The contents of ansbuf is the address of the + * array of addresses and lengths of discontiguous buffers + * that contain the reply. + * Input: pathid - Path identification number. + * trgcls - Specifies target class. + * srccls - Specifies the source message class. + * msgtag - Specifies a tag to be associated with the message. * flags1 - Option for path. * IPPRTY- 0x20 specifies if you want to send priority message. - * prmmsg - 8-bytes of data to be placed into the parameter list. + * prmmsg - 8-bytes of data to be placed into the parameter list. * ansbuf - Address of array of buffer into which IUCV moves the reply - * of this message. - * anslen - Address of length of reply buffers. - * Output: msgid - Specifies the message ID. - * Return: Return code from CP IUCV call. - * (-EINVAL) - Ansbuf address is NULL. + * of this message. + * anslen - Address of length of reply buffers. + * Output: msgid - Specifies the message ID. + * Return: Return code from CP IUCV call. + * (-EINVAL) - Ansbuf address is NULL. */ int iucv_send2way_prmmsg_array (u16 pathid, u32 * msgid, @@ -821,29 +821,29 @@ int iucv_send2way_prmmsg_array (u16 pathid, uchar prmmsg[8], iucv_array_t * ansbuf, ulong anslen); -/* - * Name: iucv_setmask - * Purpose: This function enables or disables the following IUCV - * external interruptions: Nonpriority and priority message - * interrupts, nonpriority and priority reply interrupts. +/* + * Name: iucv_setmask + * Purpose: This function enables or disables the following IUCV + * external interruptions: Nonpriority and priority message + * interrupts, nonpriority and priority reply interrupts. * Input: SetMaskFlag - options for interrupts - * 0x80 - Nonpriority_MessagePendingInterruptsFlag - * 0x40 - Priority_MessagePendingInterruptsFlag - * 0x20 - Nonpriority_MessageCompletionInterruptsFlag - * 0x10 - Priority_MessageCompletionInterruptsFlag + * 0x80 - Nonpriority_MessagePendingInterruptsFlag + * 0x40 - Priority_MessagePendingInterruptsFlag + * 0x20 - Nonpriority_MessageCompletionInterruptsFlag + * 0x10 - Priority_MessageCompletionInterruptsFlag * 0x08 - IUCVControlInterruptsFlag - * Output: NA - * Return: Return code from CP IUCV call. + * Output: NA + * Return: Return code from CP IUCV call. */ int iucv_setmask (int SetMaskFlag); -/* - * Name: iucv_sever - * Purpose: This function terminates an IUCV path. - * Input: pathid - Path identification number. - * user_data - 16-bytes of user data. - * Output: NA - * Return: Return code from CP IUCV call. - * (-EINVAL) - Interal error, wild pointer. +/* + * Name: iucv_sever + * Purpose: This function terminates an IUCV path. + * Input: pathid - Path identification number. + * user_data - 16-bytes of user data. + * Output: NA + * Return: Return code from CP IUCV call. + * (-EINVAL) - Interal error, wild pointer. */ int iucv_sever (u16 pathid, uchar user_data[16]); |