diff options
Diffstat (limited to 'drivers/scsi/megaraid')
| -rw-r--r-- | drivers/scsi/megaraid/mega_common.h | 120 | ||||
| -rw-r--r-- | drivers/scsi/megaraid/megaraid_ioctl.h | 36 | ||||
| -rw-r--r-- | drivers/scsi/megaraid/megaraid_mbox.c | 285 | ||||
| -rw-r--r-- | drivers/scsi/megaraid/megaraid_mbox.h | 42 | ||||
| -rw-r--r-- | drivers/scsi/megaraid/megaraid_mm.c | 65 | ||||
| -rw-r--r-- | drivers/scsi/megaraid/megaraid_sas.h | 14 |
6 files changed, 275 insertions, 287 deletions
diff --git a/drivers/scsi/megaraid/mega_common.h b/drivers/scsi/megaraid/mega_common.h index b50e27e..ab45e7a 100644 --- a/drivers/scsi/megaraid/mega_common.h +++ b/drivers/scsi/megaraid/mega_common.h @@ -46,17 +46,17 @@ /** * scb_t - scsi command control block - * @param ccb : command control block for individual driver - * @param list : list of control blocks - * @param gp : general purpose field for LLDs - * @param sno : all SCBs have a serial number - * @param scp : associated scsi command - * @param state : current state of scb - * @param dma_dir : direction of data transfer - * @param dma_type : transfer with sg list, buffer, or no data transfer - * @param dev_channel : actual channel on the device - * @param dev_target : actual target on the device - * @param status : completion status + * @ccb : command control block for individual driver + * @list : list of control blocks + * @gp : general purpose field for LLDs + * @sno : all SCBs have a serial number + * @scp : associated scsi command + * @state : current state of scb + * @dma_dir : direction of data transfer + * @dma_type : transfer with sg list, buffer, or no data transfer + * @dev_channel : actual channel on the device + * @dev_target : actual target on the device + * @status : completion status * * This is our central data structure to issue commands the each driver. * Driver specific data structures are maintained in the ccb field. @@ -99,42 +99,42 @@ typedef struct { /** * struct adapter_t - driver's initialization structure - * @param dpc_h : tasklet handle - * @param pdev : pci configuration pointer for kernel - * @param host : pointer to host structure of mid-layer - * @param lock : synchronization lock for mid-layer and driver - * @param quiescent : driver is quiescent for now. - * @param outstanding_cmds : number of commands pending in the driver - * @param kscb_list : pointer to the bulk of SCBs pointers for IO - * @param kscb_pool : pool of free scbs for IO - * @param kscb_pool_lock : lock for pool of free scbs - * @param pend_list : pending commands list - * @param pend_list_lock : exlusion lock for pending commands list - * @param completed_list : list of completed commands - * @param completed_list_lock : exclusion lock for list of completed commands - * @param sglen : max sg elements supported - * @param device_ids : to convert kernel device addr to our devices. - * @param raid_device : raid adapter specific pointer - * @param max_channel : maximum channel number supported - inclusive - * @param max_target : max target supported - inclusive - * @param max_lun : max lun supported - inclusive - * @param unique_id : unique identifier for each adapter - * @param irq : IRQ for this adapter - * @param ito : internal timeout value, (-1) means no timeout - * @param ibuf : buffer to issue internal commands - * @param ibuf_dma_h : dma handle for the above buffer - * @param uscb_list : SCB pointers for user cmds, common mgmt module - * @param uscb_pool : pool of SCBs for user commands - * @param uscb_pool_lock : exclusion lock for these SCBs - * @param max_cmds : max outstanding commands - * @param fw_version : firmware version - * @param bios_version : bios version - * @param max_cdb_sz : biggest CDB size supported. - * @param ha : is high availability present - clustering - * @param init_id : initiator ID, the default value should be 7 - * @param max_sectors : max sectors per request - * @param cmd_per_lun : max outstanding commands per LUN - * @param being_detached : set when unloading, no more mgmt calls + * @aram dpc_h : tasklet handle + * @pdev : pci configuration pointer for kernel + * @host : pointer to host structure of mid-layer + * @lock : synchronization lock for mid-layer and driver + * @quiescent : driver is quiescent for now. + * @outstanding_cmds : number of commands pending in the driver + * @kscb_list : pointer to the bulk of SCBs pointers for IO + * @kscb_pool : pool of free scbs for IO + * @kscb_pool_lock : lock for pool of free scbs + * @pend_list : pending commands list + * @pend_list_lock : exclusion lock for pending commands list + * @completed_list : list of completed commands + * @completed_list_lock : exclusion lock for list of completed commands + * @sglen : max sg elements supported + * @device_ids : to convert kernel device addr to our devices. + * @raid_device : raid adapter specific pointer + * @max_channel : maximum channel number supported - inclusive + * @max_target : max target supported - inclusive + * @max_lun : max lun supported - inclusive + * @unique_id : unique identifier for each adapter + * @irq : IRQ for this adapter + * @ito : internal timeout value, (-1) means no timeout + * @ibuf : buffer to issue internal commands + * @ibuf_dma_h : dma handle for the above buffer + * @uscb_list : SCB pointers for user cmds, common mgmt module + * @uscb_pool : pool of SCBs for user commands + * @uscb_pool_lock : exclusion lock for these SCBs + * @max_cmds : max outstanding commands + * @fw_version : firmware version + * @bios_version : bios version + * @max_cdb_sz : biggest CDB size supported. + * @ha : is high availability present - clustering + * @init_id : initiator ID, the default value should be 7 + * @max_sectors : max sectors per request + * @cmd_per_lun : max outstanding commands per LUN + * @being_detached : set when unloading, no more mgmt calls * * * mraid_setup_device_map() can be called anytime after the device map is @@ -211,23 +211,23 @@ typedef struct { #define SCP2ADAPTER(scp) (adapter_t *)SCSIHOST2ADAP(SCP2HOST(scp)) -/** - * MRAID_GET_DEVICE_MAP - device ids - * @param adp - Adapter's soft state - * @param scp - mid-layer scsi command pointer - * @param p_chan - physical channel on the controller - * @param target - target id of the device or logical drive number - * @param islogical - set if the command is for the logical drive - * - * Macro to retrieve information about device class, logical or physical and - * the corresponding physical channel and target or logical drive number - **/ #define MRAID_IS_LOGICAL(adp, scp) \ (SCP2CHANNEL(scp) == (adp)->max_channel) ? 1 : 0 #define MRAID_IS_LOGICAL_SDEV(adp, sdev) \ (sdev->channel == (adp)->max_channel) ? 1 : 0 +/** + * MRAID_GET_DEVICE_MAP - device ids + * @adp : adapter's soft state + * @scp : mid-layer scsi command pointer + * @p_chan : physical channel on the controller + * @target : target id of the device or logical drive number + * @islogical : set if the command is for the logical drive + * + * Macro to retrieve information about device class, logical or physical and + * the corresponding physical channel and target or logical drive number + */ #define MRAID_GET_DEVICE_MAP(adp, scp, p_chan, target, islogical) \ /* \ * Is the request coming for the virtual channel \ @@ -273,8 +273,8 @@ typedef struct { /* * struct mraid_pci_blk - structure holds DMA memory block info - * @param vaddr : virtual address to a memory block - * @param dma_addr : DMA handle to a memory block + * @vaddr : virtual address to a memory block + * @dma_addr : DMA handle to a memory block * * This structure is filled up for the caller. It is the responsibilty of the * caller to allocate this array big enough to store addresses for all diff --git a/drivers/scsi/megaraid/megaraid_ioctl.h b/drivers/scsi/megaraid/megaraid_ioctl.h index b8aa342..706fa05 100644 --- a/drivers/scsi/megaraid/megaraid_ioctl.h +++ b/drivers/scsi/megaraid/megaraid_ioctl.h @@ -22,23 +22,23 @@ #include "mbox_defs.h" +/* + * console messages debug levels + */ +#define CL_ANN 0 /* print unconditionally, announcements */ +#define CL_DLEVEL1 1 /* debug level 1, informative */ +#define CL_DLEVEL2 2 /* debug level 2, verbose */ +#define CL_DLEVEL3 3 /* debug level 3, very verbose */ + /** * con_log() - console log routine - * @param level : indicates the severity of the message. - * @fparam mt : format string + * @level : indicates the severity of the message. + * @fmt : format string * * con_log displays the error messages on the console based on the current * debug level. Also it attaches the appropriate kernel severity level with * the message. - * - * - * consolge messages debug levels */ -#define CL_ANN 0 /* print unconditionally, announcements */ -#define CL_DLEVEL1 1 /* debug level 1, informative */ -#define CL_DLEVEL2 2 /* debug level 2, verbose */ -#define CL_DLEVEL3 3 /* debug level 3, very verbose */ - #define con_log(level, fmt) if (LSI_DBGLVL >= level) printk fmt; /* @@ -157,14 +157,14 @@ typedef struct uioc { /** * struct mraid_hba_info - information about the controller * - * @param pci_vendor_id : PCI vendor id - * @param pci_device_id : PCI device id - * @param subsystem_vendor_id : PCI subsystem vendor id - * @param subsystem_device_id : PCI subsystem device id - * @param baseport : base port of hba memory - * @param pci_bus : PCI bus - * @param pci_dev_fn : PCI device/function values - * @param irq : interrupt vector for the device + * @pci_vendor_id : PCI vendor id + * @pci_device_id : PCI device id + * @subsystem_vendor_id : PCI subsystem vendor id + * @subsystem_device_id : PCI subsystem device id + * @baseport : base port of hba memory + * @pci_bus : PCI bus + * @pci_dev_fn : PCI device/function values + * @irq : interrupt vector for the device * * Extended information of 256 bytes about the controller. Align on the single * byte boundary so that 32-bit applications can be run on 64-bit platform diff --git a/drivers/scsi/megaraid/megaraid_mbox.c b/drivers/scsi/megaraid/megaraid_mbox.c index 49ee50c..04d0b69 100644 --- a/drivers/scsi/megaraid/megaraid_mbox.c +++ b/drivers/scsi/megaraid/megaraid_mbox.c @@ -147,7 +147,7 @@ MODULE_VERSION(MEGARAID_VERSION); * ### modules parameters for driver ### */ -/** +/* * Set to enable driver to expose unconfigured disk to kernel */ static int megaraid_expose_unconf_disks = 0; @@ -155,7 +155,7 @@ module_param_named(unconf_disks, megaraid_expose_unconf_disks, int, 0); MODULE_PARM_DESC(unconf_disks, "Set to expose unconfigured disks to kernel (default=0)"); -/** +/* * driver wait time if the adapter's mailbox is busy */ static unsigned int max_mbox_busy_wait = MBOX_BUSY_WAIT; @@ -163,7 +163,7 @@ module_param_named(busy_wait, max_mbox_busy_wait, int, 0); MODULE_PARM_DESC(busy_wait, "Max wait for mailbox in microseconds if busy (default=10)"); -/** +/* * number of sectors per IO command */ static unsigned int megaraid_max_sectors = MBOX_MAX_SECTORS; @@ -171,7 +171,7 @@ module_param_named(max_sectors, megaraid_max_sectors, int, 0); MODULE_PARM_DESC(max_sectors, "Maximum number of sectors per IO command (default=128)"); -/** +/* * number of commands per logical unit */ static unsigned int megaraid_cmd_per_lun = MBOX_DEF_CMD_PER_LUN; @@ -180,7 +180,7 @@ MODULE_PARM_DESC(cmd_per_lun, "Maximum number of commands per logical unit (default=64)"); -/** +/* * Fast driver load option, skip scanning for physical devices during load. * This would result in non-disk devices being skipped during driver load * time. These can be later added though, using /proc/scsi/scsi @@ -191,7 +191,7 @@ MODULE_PARM_DESC(fast_load, "Faster loading of the driver, skips physical devices! (default=0)"); -/** +/* * mraid_debug level - threshold for amount of information to be displayed by * the driver. This level can be changed through modules parameters, ioctl or * sysfs/proc interface. By default, print the announcement messages only. @@ -338,7 +338,7 @@ static struct device_attribute *megaraid_sdev_attrs[] = { * * Return value: * actual depth set - **/ + */ static int megaraid_change_queue_depth(struct scsi_device *sdev, int qdepth) { if (qdepth > MBOX_MAX_SCSI_CMDS) @@ -370,8 +370,8 @@ static struct scsi_host_template megaraid_template_g = { * megaraid_init - module load hook * * We register ourselves as hotplug enabled module and let PCI subsystem - * discover our adaters - **/ + * discover our adapters. + */ static int __init megaraid_init(void) { @@ -406,7 +406,7 @@ megaraid_init(void) /** * megaraid_exit - driver unload entry point * - * We simply unwrap the megaraid_init routine here + * We simply unwrap the megaraid_init routine here. */ static void __exit megaraid_exit(void) @@ -422,12 +422,12 @@ megaraid_exit(void) /** * megaraid_probe_one - PCI hotplug entry point - * @param pdev : handle to this controller's PCI configuration space - * @param id : pci device id of the class of controllers + * @pdev : handle to this controller's PCI configuration space + * @id : pci device id of the class of controllers * * This routine should be called whenever a new adapter is detected by the * PCI hotplug susbsytem. - **/ + */ static int __devinit megaraid_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) { @@ -543,16 +543,15 @@ out_probe_one: /** - * megaraid_detach_one - release the framework resources and call LLD release - * routine - * @param pdev : handle for our PCI cofiguration space + * megaraid_detach_one - release framework resources and call LLD release routine + * @pdev : handle for our PCI cofiguration space * * This routine is called during driver unload. We free all the allocated * resources and call the corresponding LLD so that it can also release all * its resources. * - * This routine is also called from the PCI hotplug system - **/ + * This routine is also called from the PCI hotplug system. + */ static void megaraid_detach_one(struct pci_dev *pdev) { @@ -616,9 +615,9 @@ megaraid_detach_one(struct pci_dev *pdev) /** * megaraid_mbox_shutdown - PCI shutdown for megaraid HBA - * @param device : generice driver model device + * @pdev : generic driver model device * - * Shutdown notification, perform flush cache + * Shutdown notification, perform flush cache. */ static void megaraid_mbox_shutdown(struct pci_dev *pdev) @@ -644,10 +643,10 @@ megaraid_mbox_shutdown(struct pci_dev *pdev) /** * megaraid_io_attach - attach a device with the IO subsystem - * @param adapter : controller's soft state + * @adapter : controller's soft state * - * Attach this device with the IO subsystem - **/ + * Attach this device with the IO subsystem. + */ static int megaraid_io_attach(adapter_t *adapter) { @@ -696,10 +695,10 @@ megaraid_io_attach(adapter_t *adapter) /** * megaraid_io_detach - detach a device from the IO subsystem - * @param adapter : controller's soft state + * @adapter : controller's soft state * - * Detach this device from the IO subsystem - **/ + * Detach this device from the IO subsystem. + */ static void megaraid_io_detach(adapter_t *adapter) { @@ -723,13 +722,13 @@ megaraid_io_detach(adapter_t *adapter) /** * megaraid_init_mbox - initialize controller - * @param adapter - our soft state + * @adapter : our soft state * - * . Allocate 16-byte aligned mailbox memory for firmware handshake - * . Allocate controller's memory resources - * . Find out all initialization data - * . Allocate memory required for all the commands - * . Use internal library of FW routines, build up complete soft state + * - Allocate 16-byte aligned mailbox memory for firmware handshake + * - Allocate controller's memory resources + * - Find out all initialization data + * - Allocate memory required for all the commands + * - Use internal library of FW routines, build up complete soft state */ static int __devinit megaraid_init_mbox(adapter_t *adapter) @@ -943,7 +942,7 @@ out_free_raid_dev: /** * megaraid_fini_mbox - undo controller initialization - * @param adapter : our soft state + * @adapter : our soft state */ static void megaraid_fini_mbox(adapter_t *adapter) @@ -973,12 +972,12 @@ megaraid_fini_mbox(adapter_t *adapter) /** * megaraid_alloc_cmd_packets - allocate shared mailbox - * @param adapter : soft state of the raid controller + * @adapter : soft state of the raid controller * * Allocate and align the shared mailbox. This maibox is used to issue * all the commands. For IO based controllers, the mailbox is also regsitered * with the FW. Allocate memory for all commands as well. - * This is our big allocator + * This is our big allocator. */ static int megaraid_alloc_cmd_packets(adapter_t *adapter) @@ -1138,9 +1137,9 @@ out_free_common_mbox: /** * megaraid_free_cmd_packets - free memory - * @param adapter : soft state of the raid controller + * @adapter : soft state of the raid controller * - * Release memory resources allocated for commands + * Release memory resources allocated for commands. */ static void megaraid_free_cmd_packets(adapter_t *adapter) @@ -1162,10 +1161,10 @@ megaraid_free_cmd_packets(adapter_t *adapter) /** * megaraid_mbox_setup_dma_pools - setup dma pool for command packets - * @param adapter : HBA soft state + * @adapter : HBA soft state * - * setup the dma pools for mailbox, passthru and extended passthru structures, - * and scatter-gather lists + * Setup the dma pools for mailbox, passthru and extended passthru structures, + * and scatter-gather lists. */ static int megaraid_mbox_setup_dma_pools(adapter_t *adapter) @@ -1258,10 +1257,10 @@ fail_setup_dma_pool: /** * megaraid_mbox_teardown_dma_pools - teardown dma pools for command packets - * @param adapter : HBA soft state + * @adapter : HBA soft state * - * teardown the dma pool for mailbox, passthru and extended passthru - * structures, and scatter-gather lists + * Teardown the dma pool for mailbox, passthru and extended passthru + * structures, and scatter-gather lists. */ static void megaraid_mbox_teardown_dma_pools(adapter_t *adapter) @@ -1306,10 +1305,11 @@ megaraid_mbox_teardown_dma_pools(adapter_t *adapter) /** * megaraid_alloc_scb - detach and return a scb from the free list * @adapter : controller's soft state + * @scp : pointer to the scsi command to be executed * - * return the scb from the head of the free list. NULL if there are none - * available - **/ + * Return the scb from the head of the free list. %NULL if there are none + * available. + */ static scb_t * megaraid_alloc_scb(adapter_t *adapter, struct scsi_cmnd *scp) { @@ -1343,11 +1343,11 @@ megaraid_alloc_scb(adapter_t *adapter, struct scsi_cmnd *scp) * @adapter : controller's soft state * @scb : scb to be freed * - * return the scb back to the free list of scbs. The caller must 'flush' the + * Return the scb back to the free list of scbs. The caller must 'flush' the * SCB before calling us. E.g., performing pci_unamp and/or pci_sync etc. * NOTE NOTE: Make sure the scb is not on any list before calling this * routine. - **/ + */ static inline void megaraid_dealloc_scb(adapter_t *adapter, scb_t *scb) { @@ -1368,10 +1368,10 @@ megaraid_dealloc_scb(adapter_t *adapter, scb_t *scb) /** * megaraid_mbox_mksgl - make the scatter-gather list - * @adapter - controller's soft state - * @scb - scsi control block + * @adapter : controller's soft state + * @scb : scsi control block * - * prepare the scatter-gather list + * Prepare the scatter-gather list. */ static int megaraid_mbox_mksgl(adapter_t *adapter, scb_t *scb) @@ -1441,10 +1441,10 @@ megaraid_mbox_mksgl(adapter_t *adapter, scb_t *scb) /** * mbox_post_cmd - issue a mailbox command - * @adapter - controller's soft state - * @scb - command to be issued + * @adapter : controller's soft state + * @scb : command to be issued * - * post the command to the controller if mailbox is availble. + * Post the command to the controller if mailbox is available. */ static int mbox_post_cmd(adapter_t *adapter, scb_t *scb) @@ -1524,7 +1524,7 @@ mbox_post_cmd(adapter_t *adapter, scb_t *scb) * Queue entry point for mailbox based controllers. */ static int -megaraid_queue_command(struct scsi_cmnd *scp, void (* done)(struct scsi_cmnd *)) +megaraid_queue_command(struct scsi_cmnd *scp, void (*done)(struct scsi_cmnd *)) { adapter_t *adapter; scb_t *scb; @@ -1554,15 +1554,15 @@ megaraid_queue_command(struct scsi_cmnd *scp, void (* done)(struct scsi_cmnd *)) } /** - * megaraid_mbox_build_cmd - transform the mid-layer scsi command to megaraid - * firmware lingua - * @adapter - controller's soft state - * @scp - mid-layer scsi command pointer - * @busy - set if request could not be completed because of lack of + * megaraid_mbox_build_cmd - transform the mid-layer scsi commands + * @adapter : controller's soft state + * @scp : mid-layer scsi command pointer + * @busy : set if request could not be completed because of lack of * resources * - * convert the command issued by mid-layer to format understood by megaraid - * firmware. We also complete certain command without sending them to firmware + * Transform the mid-layer scsi command to megaraid firmware lingua. + * Convert the command issued by mid-layer to format understood by megaraid + * firmware. We also complete certain commands without sending them to firmware. */ static scb_t * megaraid_mbox_build_cmd(adapter_t *adapter, struct scsi_cmnd *scp, int *busy) @@ -1943,9 +1943,9 @@ megaraid_mbox_build_cmd(adapter_t *adapter, struct scsi_cmnd *scp, int *busy) /** * megaraid_mbox_runpendq - execute commands queued in the pending queue * @adapter : controller's soft state - * @scb : SCB to be queued in the pending list + * @scb_q : SCB to be queued in the pending list * - * scan the pending list for commands which are not yet issued and try to + * Scan the pending list for commands which are not yet issued and try to * post to the controller. The SCB can be a null pointer, which would indicate * no SCB to be queue, just try to execute the ones in the pending list. * @@ -2018,11 +2018,11 @@ megaraid_mbox_runpendq(adapter_t *adapter, scb_t *scb_q) /** * megaraid_mbox_prepare_pthru - prepare a command for physical devices - * @adapter - pointer to controller's soft state - * @scb - scsi control block - * @scp - scsi command from the mid-layer + * @adapter : pointer to controller's soft state + * @scb : scsi control block + * @scp : scsi command from the mid-layer * - * prepare a command for the scsi physical devices + * Prepare a command for the scsi physical devices. */ static void megaraid_mbox_prepare_pthru(adapter_t *adapter, scb_t *scb, @@ -2066,12 +2066,12 @@ megaraid_mbox_prepare_pthru(adapter_t *adapter, scb_t *scb, /** * megaraid_mbox_prepare_epthru - prepare a command for physical devices - * @adapter - pointer to controller's soft state - * @scb - scsi control block - * @scp - scsi command from the mid-layer + * @adapter : pointer to controller's soft state + * @scb : scsi control block + * @scp : scsi command from the mid-layer * - * prepare a command for the scsi physical devices. This rountine prepares - * commands for devices which can take extended CDBs (>10 bytes) + * Prepare a command for the scsi physical devices. This rountine prepares + * commands for devices which can take extended CDBs (>10 bytes). */ static void megaraid_mbox_prepare_epthru(adapter_t *adapter, scb_t *scb, @@ -2115,9 +2115,9 @@ megaraid_mbox_prepare_epthru(adapter_t *adapter, scb_t *scb, /** * megaraid_ack_sequence - interrupt ack sequence for memory mapped HBAs - * @adapter - controller's soft state + * @adapter : controller's soft state * - * Interrupt ackrowledgement sequence for memory mapped HBAs. Find out the + * Interrupt acknowledgement sequence for memory mapped HBAs. Find out the * completed command and put them on the completed list for later processing. * * Returns: 1 if the interrupt is valid, 0 otherwise @@ -2230,9 +2230,8 @@ megaraid_ack_sequence(adapter_t *adapter) /** * megaraid_isr - isr for memory based mailbox based controllers - * @irq - irq - * @devp - pointer to our soft state - * @regs - unused + * @irq : irq + * @devp : pointer to our soft state * * Interrupt service routine for memory-mapped mailbox controllers. */ @@ -2677,7 +2676,7 @@ megaraid_abort_handler(struct scsi_cmnd *scp) * the FW is still live, in which case the outstanding commands counter mut go * down to 0. If that happens, also issue the reservation reset command to * relinquish (possible) reservations on the logical drives connected to this - * host + * host. **/ static int megaraid_reset_handler(struct scsi_cmnd *scp) @@ -2829,11 +2828,11 @@ megaraid_reset_handler(struct scsi_cmnd *scp) /** * mbox_post_sync_cmd() - blocking command to the mailbox based controllers - * @adapter - controller's soft state - * @raw_mbox - the mailbox + * @adapter : controller's soft state + * @raw_mbox : the mailbox * * Issue a scb in synchronous and non-interrupt mode for mailbox based - * controllers + * controllers. */ static int mbox_post_sync_cmd(adapter_t *adapter, uint8_t raw_mbox[]) @@ -2961,12 +2960,12 @@ blocked_mailbox: /** * mbox_post_sync_cmd_fast - blocking command to the mailbox based controllers - * @adapter - controller's soft state - * @raw_mbox - the mailbox + * @adapter : controller's soft state + * @raw_mbox : the mailbox * * Issue a scb in synchronous and non-interrupt mode for mailbox based * controllers. This is a faster version of the synchronous command and - * therefore can be called in interrupt-context as well + * therefore can be called in interrupt-context as well. */ static int mbox_post_sync_cmd_fast(adapter_t *adapter, uint8_t raw_mbox[]) @@ -3014,10 +3013,10 @@ mbox_post_sync_cmd_fast(adapter_t *adapter, uint8_t raw_mbox[]) /** * megaraid_busywait_mbox() - Wait until the controller's mailbox is available - * @raid_dev - RAID device (HBA) soft state + * @raid_dev : RAID device (HBA) soft state * - * wait until the controller's mailbox is available to accept more commands. - * wait for at most 1 second + * Wait until the controller's mailbox is available to accept more commands. + * Wait for at most 1 second. */ static int megaraid_busywait_mbox(mraid_device_t *raid_dev) @@ -3038,9 +3037,9 @@ megaraid_busywait_mbox(mraid_device_t *raid_dev) /** * megaraid_mbox_product_info - some static information about the controller - * @adapter - our soft state + * @adapter : our soft state * - * issue commands to the controller to grab some parameters required by our + * Issue commands to the controller to grab some parameters required by our * caller. */ static int @@ -3163,10 +3162,10 @@ megaraid_mbox_product_info(adapter_t *adapter) /** * megaraid_mbox_extended_cdb - check for support for extended CDBs - * @adapter - soft state for the controller + * @adapter : soft state for the controller * - * this routine check whether the controller in question supports extended - * ( > 10 bytes ) CDBs + * This routine check whether the controller in question supports extended + * ( > 10 bytes ) CDBs. */ static int megaraid_mbox_extended_cdb(adapter_t *adapter) @@ -3199,8 +3198,8 @@ megaraid_mbox_extended_cdb(adapter_t *adapter) /** * megaraid_mbox_support_ha - Do we support clustering - * @adapter - soft state for the controller - * @init_id - ID of the initiator + * @adapter : soft state for the controller + * @init_id : ID of the initiator * * Determine if the firmware supports clustering and the ID of the initiator. */ @@ -3242,9 +3241,9 @@ megaraid_mbox_support_ha(adapter_t *adapter, uint16_t *init_id) /** * megaraid_mbox_support_random_del - Do we support random deletion - * @adapter - soft state for the controller + * @adapter : soft state for the controller * - * Determine if the firmware supports random deletion + * Determine if the firmware supports random deletion. * Return: 1 is operation supported, 0 otherwise */ static int @@ -3277,10 +3276,10 @@ megaraid_mbox_support_random_del(adapter_t *adapter) /** * megaraid_mbox_get_max_sg - maximum sg elements supported by the firmware - * @adapter - soft state for the controller + * @adapter : soft state for the controller * * Find out the maximum number of scatter-gather elements supported by the - * firmware + * firmware. */ static int megaraid_mbox_get_max_sg(adapter_t *adapter) @@ -3317,10 +3316,10 @@ megaraid_mbox_get_max_sg(adapter_t *adapter) /** * megaraid_mbox_enum_raid_scsi - enumerate the RAID and SCSI channels - * @adapter - soft state for the controller + * @adapter : soft state for the controller * - * Enumerate the RAID and SCSI channels for ROMB platoforms so that channels - * can be exported as regular SCSI channels + * Enumerate the RAID and SCSI channels for ROMB platforms so that channels + * can be exported as regular SCSI channels. */ static void megaraid_mbox_enum_raid_scsi(adapter_t *adapter) @@ -3354,9 +3353,9 @@ megaraid_mbox_enum_raid_scsi(adapter_t *adapter) /** * megaraid_mbox_flush_cache - flush adapter and disks cache - * @param adapter : soft state for the controller + * @adapter : soft state for the controller * - * Flush adapter cache followed by disks cache + * Flush adapter cache followed by disks cache. */ static void megaraid_mbox_flush_cache(adapter_t *adapter) @@ -3387,9 +3386,9 @@ megaraid_mbox_flush_cache(adapter_t *adapter) /** * megaraid_mbox_fire_sync_cmd - fire the sync cmd - * @param adapter : soft state for the controller + * @adapter : soft state for the controller * - * Clears the pending cmds in FW and reinits its RAID structs + * Clears the pending cmds in FW and reinits its RAID structs. */ static int megaraid_mbox_fire_sync_cmd(adapter_t *adapter) @@ -3465,12 +3464,12 @@ blocked_mailbox: /** * megaraid_mbox_display_scb - display SCB information, mostly debug purposes - * @param adapter : controllers' soft state - * @param scb : SCB to be displayed - * @param level : debug level for console print + * @adapter : controller's soft state + * @scb : SCB to be displayed + * @level : debug level for console print * * Diplay information about the given SCB iff the current debug level is - * verbose + * verbose. */ static void megaraid_mbox_display_scb(adapter_t *adapter, scb_t *scb) @@ -3518,7 +3517,7 @@ megaraid_mbox_display_scb(adapter_t *adapter, scb_t *scb) * scsi addresses and megaraid scsi and logical drive addresses. We export * scsi devices on their actual addresses, whereas the logical drives are * exported on a virtual scsi channel. - **/ + */ static void megaraid_mbox_setup_device_map(adapter_t *adapter) { @@ -3556,7 +3555,7 @@ megaraid_mbox_setup_device_map(adapter_t *adapter) /** * megaraid_cmm_register - register with the mangement module - * @param adapter : HBA soft state + * @adapter : HBA soft state * * Register with the management module, which allows applications to issue * ioctl calls to the drivers. This interface is used by the management module @@ -3646,11 +3645,11 @@ megaraid_cmm_register(adapter_t *adapter) /** * megaraid_cmm_unregister - un-register with the mangement module - * @param adapter : HBA soft state + * @adapter : HBA soft state * * Un-register with the management module. * FIXME: mgmt module must return failure for unregister if it has pending - * commands in LLD + * commands in LLD. */ static int megaraid_cmm_unregister(adapter_t *adapter) @@ -3663,9 +3662,9 @@ megaraid_cmm_unregister(adapter_t *adapter) /** * megaraid_mbox_mm_handler - interface for CMM to issue commands to LLD - * @param drvr_data : LLD specific data - * @param kioc : CMM interface packet - * @param action : command action + * @drvr_data : LLD specific data + * @kioc : CMM interface packet + * @action : command action * * This routine is invoked whenever the Common Mangement Module (CMM) has a * command for us. The 'action' parameter specifies if this is a new command @@ -3718,8 +3717,8 @@ megaraid_mbox_mm_handler(unsigned long drvr_data, uioc_t *kioc, uint32_t action) /** * megaraid_mbox_mm_command - issues commands routed through CMM - * @param adapter : HBA soft state - * @param kioc : management command packet + * @adapter : HBA soft state + * @kioc : management command packet * * Issues commands, which are routed through the management module. */ @@ -3888,8 +3887,8 @@ megaraid_mbox_mm_done(adapter_t *adapter, scb_t *scb) /** * gather_hbainfo - HBA characteristics for the applications - * @param adapter : HBA soft state - * @param hinfo : pointer to the caller's host info strucuture + * @adapter : HBA soft state + * @hinfo : pointer to the caller's host info strucuture */ static int gather_hbainfo(adapter_t *adapter, mraid_hba_info_t *hinfo) @@ -3923,16 +3922,15 @@ gather_hbainfo(adapter_t *adapter, mraid_hba_info_t *hinfo) /** * megaraid_sysfs_alloc_resources - allocate sysfs related resources + * @adapter : controller's soft state * * Allocate packets required to issue FW calls whenever the sysfs attributes * are read. These attributes would require up-to-date information from the * FW. Also set up resources for mutual exclusion to share these resources and * the wait queue. * - * @param adapter : controller's soft state - * - * @return 0 on success - * @return -ERROR_CODE on failure + * Return 0 on success. + * Return -ERROR_CODE on failure. */ static int megaraid_sysfs_alloc_resources(adapter_t *adapter) @@ -3969,10 +3967,9 @@ megaraid_sysfs_alloc_resources(adapter_t *adapter) /** * megaraid_sysfs_free_resources - free sysfs related resources + * @adapter : controller's soft state * * Free packets allocated for sysfs FW commands - * - * @param adapter : controller's soft state */ static void megaraid_sysfs_free_resources(adapter_t *adapter) @@ -3991,10 +3988,9 @@ megaraid_sysfs_free_resources(adapter_t *adapter) /** * megaraid_sysfs_get_ldmap_done - callback for get ldmap + * @uioc : completed packet * * Callback routine called in the ISR/tasklet context for get ldmap call - * - * @param uioc : completed packet */ static void megaraid_sysfs_get_ldmap_done(uioc_t *uioc) @@ -4010,12 +4006,11 @@ megaraid_sysfs_get_ldmap_done(uioc_t *uioc) /** * megaraid_sysfs_get_ldmap_timeout - timeout handling for get ldmap + * @data : timed out packet * * Timeout routine to recover and return to application, in case the adapter - * has stopped responding. A timeout of 60 seconds for this command seem like - * a good value - * - * @param uioc : timed out packet + * has stopped responding. A timeout of 60 seconds for this command seems like + * a good value. */ static void megaraid_sysfs_get_ldmap_timeout(unsigned long data) @@ -4032,6 +4027,7 @@ megaraid_sysfs_get_ldmap_timeout(unsigned long data) /** * megaraid_sysfs_get_ldmap - get update logical drive map + * @adapter : controller's soft state * * This routine will be called whenever user reads the logical drive * attributes, go get the current logical drive mapping table from the @@ -4043,10 +4039,8 @@ megaraid_sysfs_get_ldmap_timeout(unsigned long data) * standalone libary. For now, this should suffice since there is no other * user of this interface. * - * @param adapter : controller's soft state - * - * @return 0 on success - * @return -1 on failure + * Return 0 on success. + * Return -1 on failure. */ static int megaraid_sysfs_get_ldmap(adapter_t *adapter) @@ -4148,13 +4142,12 @@ megaraid_sysfs_get_ldmap(adapter_t *adapter) /** * megaraid_sysfs_show_app_hndl - display application handle for this adapter + * @cdev : class device object representation for the host + * @buf : buffer to send data to * * Display the handle used by the applications while executing management * tasks on the adapter. We invoke a management module API to get the adapter * handle, since we do not interface with applications directly. - * - * @param cdev : class device object representation for the host - * @param buf : buffer to send data to */ static ssize_t megaraid_sysfs_show_app_hndl(struct class_device *cdev, char *buf) @@ -4171,16 +4164,18 @@ megaraid_sysfs_show_app_hndl(struct class_device *cdev, char *buf) /** * megaraid_sysfs_show_ldnum - display the logical drive number for this device + * @dev : device object representation for the scsi device + * @attr : device attribute to show + * @buf : buffer to send data to * * Display the logical drive number for the device in question, if it a valid - * logical drive. For physical devices, "-1" is returned - * The logical drive number is displayed in following format + * logical drive. For physical devices, "-1" is returned. + * + * The logical drive number is displayed in following format: * * <SCSI ID> <LD NUM> <LD STICKY ID> <APP ADAPTER HANDLE> - * <int> <int> <int> <int> * - * @param dev : device object representation for the scsi device - * @param buf : buffer to send data to + * <int> <int> <int> <int> */ static ssize_t megaraid_sysfs_show_ldnum(struct device *dev, struct device_attribute *attr, char *buf) diff --git a/drivers/scsi/megaraid/megaraid_mbox.h b/drivers/scsi/megaraid/megaraid_mbox.h index 963e0d2..9de803c 100644 --- a/drivers/scsi/megaraid/megaraid_mbox.h +++ b/drivers/scsi/megaraid/megaraid_mbox.h @@ -146,27 +146,27 @@ typedef struct { /** * mraid_device_t - adapter soft state structure for mailbox controllers - * @param una_mbox64 : 64-bit mbox - unaligned - * @param una_mbox64_dma : mbox dma addr - unaligned - * @param mbox : 32-bit mbox - aligned - * @param mbox64 : 64-bit mbox - aligned - * @param mbox_dma : mbox dma addr - aligned - * @param mailbox_lock : exclusion lock for the mailbox - * @param baseport : base port of hba memory - * @param baseaddr : mapped addr of hba memory - * @param mbox_pool : pool of mailboxes - * @param mbox_pool_handle : handle for the mailbox pool memory - * @param epthru_pool : a pool for extended passthru commands - * @param epthru_pool_handle : handle to the pool above - * @param sg_pool : pool of scatter-gather lists for this driver - * @param sg_pool_handle : handle to the pool above - * @param ccb_list : list of our command control blocks - * @param uccb_list : list of cmd control blocks for mgmt module - * @param umbox64 : array of mailbox for user commands (cmm) - * @param pdrv_state : array for state of each physical drive. - * @param last_disp : flag used to show device scanning - * @param hw_error : set if FW not responding - * @param fast_load : If set, skip physical device scanning + * @una_mbox64 : 64-bit mbox - unaligned + * @una_mbox64_dma : mbox dma addr - unaligned + * @mbox : 32-bit mbox - aligned + * @mbox64 : 64-bit mbox - aligned + * @mbox_dma : mbox dma addr - aligned + * @mailbox_lock : exclusion lock for the mailbox + * @baseport : base port of hba memory + * @baseaddr : mapped addr of hba memory + * @mbox_pool : pool of mailboxes + * @mbox_pool_handle : handle for the mailbox pool memory + * @epthru_pool : a pool for extended passthru commands + * @epthru_pool_handle : handle to the pool above + * @sg_pool : pool of scatter-gather lists for this driver + * @sg_pool_handle : handle to the pool above + * @ccb_list : list of our command control blocks + * @uccb_list : list of cmd control blocks for mgmt module + * @umbox64 : array of mailbox for user commands (cmm) + * @pdrv_state : array for state of each physical drive. + * @last_disp : flag used to show device scanning + * @hw_error : set if FW not responding + * @fast_load : If set, skip physical device scanning * @channel_class : channel class, RAID or SCSI * @sysfs_sem : semaphore to serialize access to sysfs res. * @sysfs_uioc : management packet to issue FW calls from sysfs diff --git a/drivers/scsi/megaraid/megaraid_mm.c b/drivers/scsi/megaraid/megaraid_mm.c index d85b9a8..c1ff20c 100644 --- a/drivers/scsi/megaraid/megaraid_mm.c +++ b/drivers/scsi/megaraid/megaraid_mm.c @@ -78,10 +78,10 @@ static struct file_operations lsi_fops = { /** * mraid_mm_open - open routine for char node interface - * @inod : unused + * @inode : unused * @filep : unused * - * allow ioctl operations by apps only if they superuser privilege + * Allow ioctl operations by apps only if they have superuser privilege. */ static int mraid_mm_open(struct inode *inode, struct file *filep) @@ -214,7 +214,9 @@ mraid_mm_ioctl(struct inode *inode, struct file *filep, unsigned int cmd, /** * mraid_mm_get_adapter - Returns corresponding adapters for the mimd packet * @umimd : User space mimd_t ioctl packet - * @adapter : pointer to the adapter (OUT) + * @rval : returned success/error status + * + * The function return value is a pointer to the located @adapter. */ static mraid_mmadp_t * mraid_mm_get_adapter(mimd_t __user *umimd, int *rval) @@ -252,11 +254,11 @@ mraid_mm_get_adapter(mimd_t __user *umimd, int *rval) return adapter; } -/* - * handle_drvrcmd - This routine checks if the opcode is a driver - * cmd and if it is, handles it. +/** + * handle_drvrcmd - Checks if the opcode is a driver cmd and if it is, handles it. * @arg : packet sent by the user app * @old_ioctl : mimd if 1; uioc otherwise + * @rval : pointer for command's returned value (not function status) */ static int handle_drvrcmd(void __user *arg, uint8_t old_ioctl, int *rval) @@ -322,8 +324,8 @@ old_packet: /** * mimd_to_kioc - Converter from old to new ioctl format - * * @umimd : user space old MIMD IOCTL + * @adp : adapter softstate * @kioc : kernel space new format IOCTL * * Routine to convert MIMD interface IOCTL to new interface IOCTL packet. The @@ -474,7 +476,6 @@ mimd_to_kioc(mimd_t __user *umimd, mraid_mmadp_t *adp, uioc_t *kioc) /** * mraid_mm_attch_buf - Attach a free dma buffer for required size - * * @adp : Adapter softstate * @kioc : kioc that the buffer needs to be attached to * @xferlen : required length for buffer @@ -607,7 +608,6 @@ mraid_mm_alloc_kioc(mraid_mmadp_t *adp) /** * mraid_mm_dealloc_kioc - Return kioc to free pool - * * @adp : Adapter softstate * @kioc : uioc_t node to be returned to free pool */ @@ -652,7 +652,6 @@ mraid_mm_dealloc_kioc(mraid_mmadp_t *adp, uioc_t *kioc) /** * lld_ioctl - Routine to issue ioctl to low level drvr - * * @adp : The adapter handle * @kioc : The ioctl packet with kernel addresses */ @@ -705,7 +704,6 @@ lld_ioctl(mraid_mmadp_t *adp, uioc_t *kioc) /** * ioctl_done - callback from the low level driver - * * @kioc : completed ioctl packet */ static void @@ -756,9 +754,8 @@ ioctl_done(uioc_t *kioc) } -/* - * lld_timedout : callback from the expired timer - * +/** + * lld_timedout - callback from the expired timer * @ptr : ioctl packet that timed out */ static void @@ -776,8 +773,7 @@ lld_timedout(unsigned long ptr) /** - * kioc_to_mimd : Converter from new back to old format - * + * kioc_to_mimd - Converter from new back to old format * @kioc : Kernel space IOCTL packet (successfully issued) * @mimd : User space MIMD packet */ @@ -855,7 +851,6 @@ kioc_to_mimd(uioc_t *kioc, mimd_t __user *mimd) /** * hinfo_to_cinfo - Convert new format hba info into old format - * * @hinfo : New format, more comprehensive adapter info * @cinfo : Old format adapter info to support mimd_t apps */ @@ -878,10 +873,9 @@ hinfo_to_cinfo(mraid_hba_info_t *hinfo, mcontroller_t *cinfo) } -/* - * mraid_mm_register_adp - Registration routine for low level drvrs - * - * @adp : Adapter objejct +/** + * mraid_mm_register_adp - Registration routine for low level drivers + * @lld_adp : Adapter objejct */ int mraid_mm_register_adp(mraid_mmadp_t *lld_adp) @@ -1007,15 +1001,14 @@ memalloc_error: /** * mraid_mm_adapter_app_handle - return the application handle for this adapter + * @unique_id : adapter unique identifier * - * For the given driver data, locate the adadpter in our global list and + * For the given driver data, locate the adapter in our global list and * return the corresponding handle, which is also used by applications to * uniquely identify an adapter. * - * @param unique_id : adapter unique identifier - * - * @return adapter handle if found in the list - * @return 0 if adapter could not be located, should never happen though + * Return adapter handle if found in the list. + * Return 0 if adapter could not be located, should never happen though. */ uint32_t mraid_mm_adapter_app_handle(uint32_t unique_id) @@ -1040,7 +1033,6 @@ mraid_mm_adapter_app_handle(uint32_t unique_id) /** * mraid_mm_setup_dma_pools - Set up dma buffer pools per adapter - * * @adp : Adapter softstate * * We maintain a pool of dma buffers per each adapter. Each pool has one @@ -1093,11 +1085,11 @@ dma_pool_setup_error: } -/* +/** * mraid_mm_unregister_adp - Unregister routine for low level drivers - * Assume no outstanding ioctls to llds. - * * @unique_id : UID of the adpater + * + * Assumes no outstanding ioctls to llds. */ int mraid_mm_unregister_adp(uint32_t unique_id) @@ -1131,7 +1123,6 @@ mraid_mm_unregister_adp(uint32_t unique_id) /** * mraid_mm_free_adp_resources - Free adapter softstate - * * @adp : Adapter softstate */ static void @@ -1162,7 +1153,6 @@ mraid_mm_free_adp_resources(mraid_mmadp_t *adp) /** * mraid_mm_teardown_dma_pools - Free all per adapter dma buffers - * * @adp : Adapter softstate */ static void @@ -1190,7 +1180,7 @@ mraid_mm_teardown_dma_pools(mraid_mmadp_t *adp) } /** - * mraid_mm_init : Module entry point + * mraid_mm_init - Module entry point */ static int __init mraid_mm_init(void) @@ -1214,10 +1204,13 @@ mraid_mm_init(void) } +#ifdef CONFIG_COMPAT /** - * mraid_mm_compat_ioctl : 32bit to 64bit ioctl conversion routine + * mraid_mm_compat_ioctl - 32bit to 64bit ioctl conversion routine + * @filep : file operations pointer (ignored) + * @cmd : ioctl command + * @arg : user ioctl packet */ -#ifdef CONFIG_COMPAT static long mraid_mm_compat_ioctl(struct file *filep, unsigned int cmd, unsigned long arg) @@ -1231,7 +1224,7 @@ mraid_mm_compat_ioctl(struct file *filep, unsigned int cmd, #endif /** - * mraid_mm_exit : Module exit point + * mraid_mm_exit - Module exit point */ static void __exit mraid_mm_exit(void) diff --git a/drivers/scsi/megaraid/megaraid_sas.h b/drivers/scsi/megaraid/megaraid_sas.h index 55eddcf..cacb3ad 100644 --- a/drivers/scsi/megaraid/megaraid_sas.h +++ b/drivers/scsi/megaraid/megaraid_sas.h @@ -15,7 +15,7 @@ #ifndef LSI_MEGARAID_SAS_H #define LSI_MEGARAID_SAS_H -/** +/* * MegaRAID SAS Driver meta data */ #define MEGASAS_VERSION "00.00.03.05" @@ -40,7 +40,7 @@ * "message frames" */ -/** +/* * FW posts its state in upper 4 bits of outbound_msg_0 register */ #define MFI_STATE_MASK 0xF0000000 @@ -58,7 +58,7 @@ #define MEGAMFI_FRAME_SIZE 64 -/** +/* * During FW init, clear pending cmds & reset state using inbound_msg_0 * * ABORT : Abort all pending cmds @@ -78,7 +78,7 @@ MFI_INIT_MFIMODE| \ MFI_INIT_ABORT -/** +/* * MFI frame flags */ #define MFI_FRAME_POST_IN_REPLY_QUEUE 0x0000 @@ -92,12 +92,12 @@ #define MFI_FRAME_DIR_READ 0x0010 #define MFI_FRAME_DIR_BOTH 0x0018 -/** +/* * Definition for cmd_status */ #define MFI_CMD_STATUS_POLL_MODE 0xFF -/** +/* * MFI command opcodes */ #define MFI_CMD_INIT 0x00 @@ -128,7 +128,7 @@ #define MR_DCMD_CLUSTER_RESET_ALL 0x08010100 #define MR_DCMD_CLUSTER_RESET_LD 0x08010200 -/** +/* * MFI command completion codes */ enum MFI_STAT { |