diff options
Diffstat (limited to 'drivers/scsi/sata_vsc.c')
| -rw-r--r-- | drivers/scsi/sata_vsc.c | 25 |
1 files changed, 18 insertions, 7 deletions
diff --git a/drivers/scsi/sata_vsc.c b/drivers/scsi/sata_vsc.c index 27d6587..6d0c4f1 100644 --- a/drivers/scsi/sata_vsc.c +++ b/drivers/scsi/sata_vsc.c @@ -221,14 +221,21 @@ static irqreturn_t vsc_sata_interrupt (int irq, void *dev_instance, ap = host_set->ports[i]; - if (ap && !(ap->flags & - (ATA_FLAG_PORT_DISABLED|ATA_FLAG_NOINTR))) { + if (is_vsc_sata_int_err(i, int_status)) { + u32 err_status; + printk(KERN_DEBUG "%s: ignoring interrupt(s)\n", __FUNCTION__); + err_status = ap ? vsc_sata_scr_read(ap, SCR_ERROR) : 0; + vsc_sata_scr_write(ap, SCR_ERROR, err_status); + handled++; + } + + if (ap && !(ap->flags & ATA_FLAG_DISABLED)) { struct ata_queued_cmd *qc; qc = ata_qc_from_tag(ap, ap->active_tag); - if (qc && (!(qc->tf.ctl & ATA_NIEN))) { + if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING))) handled += ata_host_intr(ap, qc); - } else if (is_vsc_sata_int_err(i, int_status)) { + else if (is_vsc_sata_int_err(i, int_status)) { /* * On some chips (i.e. Intel 31244), an error * interrupt will sneak in at initialization @@ -272,6 +279,7 @@ static struct scsi_host_template vsc_sata_sht = { .proc_name = DRV_NAME, .dma_boundary = ATA_DMA_BOUNDARY, .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, }; @@ -283,14 +291,17 @@ static const struct ata_port_operations vsc_sata_ops = { .exec_command = ata_exec_command, .check_status = ata_check_status, .dev_select = ata_std_dev_select, - .phy_reset = sata_phy_reset, .bmdma_setup = ata_bmdma_setup, .bmdma_start = ata_bmdma_start, .bmdma_stop = ata_bmdma_stop, .bmdma_status = ata_bmdma_status, .qc_prep = ata_qc_prep, .qc_issue = ata_qc_issue_prot, - .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = ata_bmdma_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, .irq_handler = vsc_sata_interrupt, .irq_clear = ata_bmdma_irq_clear, .scr_read = vsc_sata_scr_read, @@ -385,7 +396,7 @@ static int __devinit vsc_sata_init_one (struct pci_dev *pdev, const struct pci_d probe_ent->sht = &vsc_sata_sht; probe_ent->host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_MMIO | ATA_FLAG_SATA_RESET; + ATA_FLAG_MMIO; probe_ent->port_ops = &vsc_sata_ops; probe_ent->n_ports = 4; probe_ent->irq = pdev->irq; |