diff options
Diffstat (limited to 'drivers/tty/serial')
34 files changed, 2713 insertions, 1157 deletions
diff --git a/drivers/tty/serial/68328serial.c b/drivers/tty/serial/68328serial.c index be0ebce..d5bfd41 100644 --- a/drivers/tty/serial/68328serial.c +++ b/drivers/tty/serial/68328serial.c @@ -262,7 +262,7 @@ static void status_handle(struct m68k_serial *info, unsigned short status) static void receive_chars(struct m68k_serial *info, unsigned short rx) { - struct tty_struct *tty = info->port.tty; + struct tty_struct *tty = info->tty; m68328_uart *uart = &uart_addr[info->line]; unsigned char ch, flag; @@ -329,7 +329,7 @@ static void transmit_chars(struct m68k_serial *info) goto clear_and_return; } - if((info->xmit_cnt <= 0) || info->port.tty->stopped) { + if((info->xmit_cnt <= 0) || info->tty->stopped) { /* That's peculiar... TX ints off */ uart->ustcnt &= ~USTCNT_TX_INTR_MASK; goto clear_and_return; @@ -383,7 +383,7 @@ static void do_softint(struct work_struct *work) struct m68k_serial *info = container_of(work, struct m68k_serial, tqueue); struct tty_struct *tty; - tty = info->port.tty; + tty = info->tty; if (!tty) return; #if 0 @@ -393,28 +393,6 @@ static void do_softint(struct work_struct *work) #endif } -/* - * This routine is called from the scheduler tqueue when the interrupt - * routine has signalled that a hangup has occurred. The path of - * hangup processing is: - * - * serial interrupt routine -> (scheduler tqueue) -> - * do_serial_hangup() -> tty->hangup() -> rs_hangup() - * - */ -static void do_serial_hangup(struct work_struct *work) -{ - struct m68k_serial *info = container_of(work, struct m68k_serial, tqueue_hangup); - struct tty_struct *tty; - - tty = info->port.tty; - if (!tty) - return; - - tty_hangup(tty); -} - - static int startup(struct m68k_serial * info) { m68328_uart *uart = &uart_addr[info->line]; @@ -451,8 +429,8 @@ static int startup(struct m68k_serial * info) uart->ustcnt = USTCNT_UEN | USTCNT_RXEN | USTCNT_RX_INTR_MASK; #endif - if (info->port.tty) - clear_bit(TTY_IO_ERROR, &info->port.tty->flags); + if (info->tty) + clear_bit(TTY_IO_ERROR, &info->tty->flags); info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; /* @@ -486,8 +464,8 @@ static void shutdown(struct m68k_serial * info) info->xmit_buf = 0; } - if (info->port.tty) - set_bit(TTY_IO_ERROR, &info->port.tty->flags); + if (info->tty) + set_bit(TTY_IO_ERROR, &info->tty->flags); info->flags &= ~S_INITIALIZED; local_irq_restore(flags); @@ -553,9 +531,9 @@ static void change_speed(struct m68k_serial *info) unsigned cflag; int i; - if (!info->port.tty || !info->port.tty->termios) + if (!info->tty || !info->tty->termios) return; - cflag = info->port.tty->termios->c_cflag; + cflag = info->tty->termios->c_cflag; if (!(port = info->port)) return; @@ -967,10 +945,9 @@ static void send_break(struct m68k_serial * info, unsigned int duration) local_irq_restore(flags); } -static int rs_ioctl(struct tty_struct *tty, struct file * file, +static int rs_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { - int error; struct m68k_serial * info = (struct m68k_serial *)tty->driver_data; int retval; @@ -1104,7 +1081,7 @@ static void rs_close(struct tty_struct *tty, struct file * filp) tty_ldisc_flush(tty); tty->closing = 0; info->event = 0; - info->port.tty = NULL; + info->tty = NULL; #warning "This is not and has never been valid so fix it" #if 0 if (tty->ldisc.num != ldiscs[N_TTY].num) { @@ -1142,7 +1119,7 @@ void rs_hangup(struct tty_struct *tty) info->event = 0; info->count = 0; info->flags &= ~S_NORMAL_ACTIVE; - info->port.tty = NULL; + info->tty = NULL; wake_up_interruptible(&info->open_wait); } @@ -1261,7 +1238,7 @@ int rs_open(struct tty_struct *tty, struct file * filp) info->count++; tty->driver_data = info; - info->port.tty = tty; + info->tty = tty; /* * Start up serial port @@ -1338,7 +1315,7 @@ rs68328_init(void) info = &m68k_soft[i]; info->magic = SERIAL_MAGIC; info->port = (int) &uart_addr[i]; - info->port.tty = NULL; + info->tty = NULL; info->irq = uart_irqs[i]; info->custom_divisor = 16; info->close_delay = 50; @@ -1348,7 +1325,6 @@ rs68328_init(void) info->count = 0; info->blocked_open = 0; INIT_WORK(&info->tqueue, do_softint); - INIT_WORK(&info->tqueue_hangup, do_serial_hangup); init_waitqueue_head(&info->open_wait); init_waitqueue_head(&info->close_wait); info->line = i; diff --git a/drivers/tty/serial/68328serial.h b/drivers/tty/serial/68328serial.h index 664ceb0..8c9c3c0 100644 --- a/drivers/tty/serial/68328serial.h +++ b/drivers/tty/serial/68328serial.h @@ -159,7 +159,6 @@ struct m68k_serial { int xmit_tail; int xmit_cnt; struct work_struct tqueue; - struct work_struct tqueue_hangup; wait_queue_head_t open_wait; wait_queue_head_t close_wait; }; diff --git a/drivers/tty/serial/68360serial.c b/drivers/tty/serial/68360serial.c index bc21eea..0a3e878 100644 --- a/drivers/tty/serial/68360serial.c +++ b/drivers/tty/serial/68360serial.c @@ -1240,7 +1240,7 @@ static int get_lsr_info(struct async_struct * info, unsigned int *value) } #endif -static int rs_360_tiocmget(struct tty_struct *tty, struct file *file) +static int rs_360_tiocmget(struct tty_struct *tty) { ser_info_t *info = (ser_info_t *)tty->driver_data; unsigned int result = 0; @@ -1271,7 +1271,7 @@ static int rs_360_tiocmget(struct tty_struct *tty, struct file *file) return result; } -static int rs_360_tiocmset(struct tty_struct *tty, struct file *file, +static int rs_360_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { #ifdef modem_control @@ -1405,7 +1405,7 @@ static int rs_360_get_icount(struct tty_struct *tty, return 0; } -static int rs_360_ioctl(struct tty_struct *tty, struct file * file, +static int rs_360_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { int error; diff --git a/drivers/tty/serial/8250.c b/drivers/tty/serial/8250.c index 3975df6..b3b881b 100644 --- a/drivers/tty/serial/8250.c +++ b/drivers/tty/serial/8250.c @@ -954,6 +954,23 @@ static int broken_efr(struct uart_8250_port *up) return 0; } +static inline int ns16550a_goto_highspeed(struct uart_8250_port *up) +{ + unsigned char status; + + status = serial_in(up, 0x04); /* EXCR2 */ +#define PRESL(x) ((x) & 0x30) + if (PRESL(status) == 0x10) { + /* already in high speed mode */ + return 0; + } else { + status &= ~0xB0; /* Disable LOCK, mask out PRESL[01] */ + status |= 0x10; /* 1.625 divisor for baud_base --> 921600 */ + serial_outp(up, 0x04, status); + } + return 1; +} + /* * We know that the chip has FIFOs. Does it have an EFR? The * EFR is located in the same register position as the IIR and @@ -1025,12 +1042,8 @@ static void autoconfig_16550a(struct uart_8250_port *up) quot = serial_dl_read(up); quot <<= 3; - status1 = serial_in(up, 0x04); /* EXCR2 */ - status1 &= ~0xB0; /* Disable LOCK, mask out PRESL[01] */ - status1 |= 0x10; /* 1.625 divisor for baud_base --> 921600 */ - serial_outp(up, 0x04, status1); - - serial_dl_write(up, quot); + if (ns16550a_goto_highspeed(up)) + serial_dl_write(up, quot); serial_outp(up, UART_LCR, 0); @@ -3025,17 +3038,13 @@ void serial8250_resume_port(int line) struct uart_8250_port *up = &serial8250_ports[line]; if (up->capabilities & UART_NATSEMI) { - unsigned char tmp; - /* Ensure it's still in high speed mode */ serial_outp(up, UART_LCR, 0xE0); - tmp = serial_in(up, 0x04); /* EXCR2 */ - tmp &= ~0xB0; /* Disable LOCK, mask out PRESL[01] */ - tmp |= 0x10; /* 1.625 divisor for baud_base --> 921600 */ - serial_outp(up, 0x04, tmp); + ns16550a_goto_highspeed(up); serial_outp(up, UART_LCR, 0); + up->port.uartclk = 921600*16; } uart_resume_port(&serial8250_reg, &up->port); } diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 2b83346..e461be1 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -1110,29 +1110,6 @@ config SERIAL_PMACZILOG_CONSOLE on your (Power)Mac as the console, you can do so by answering Y to this option. -config SERIAL_LH7A40X - tristate "Sharp LH7A40X embedded UART support" - depends on ARM && ARCH_LH7A40X - select SERIAL_CORE - help - This enables support for the three on-board UARTs of the - Sharp LH7A40X series CPUs. Choose Y or M. - -config SERIAL_LH7A40X_CONSOLE - bool "Support for console on Sharp LH7A40X serial port" - depends on SERIAL_LH7A40X=y - select SERIAL_CORE_CONSOLE - help - Say Y here if you wish to use one of the serial ports as the - system console--the system console is the device which - receives all kernel messages and warnings and which allows - logins in single user mode. - - Even if you say Y here, the currently visible framebuffer console - (/dev/tty0) will still be used as the default system console, but - you can alter that using a kernel command line, for example - "console=ttyAM1". - config SERIAL_CPM tristate "CPM SCC/SMC serial port support" depends on CPM2 || 8xx @@ -1319,6 +1296,18 @@ config SERIAL_MSM_CONSOLE depends on SERIAL_MSM=y select SERIAL_CORE_CONSOLE +config SERIAL_MSM_HS + tristate "MSM UART High Speed: Serial Driver" + depends on ARCH_MSM + select SERIAL_CORE + help + If you have a machine based on MSM family of SoCs, you + can enable its onboard high speed serial port by enabling + this option. + + Choose M here to compile it as a module. The module will be + called msm_serial_hs. + config SERIAL_VT8500 bool "VIA VT8500 on-chip serial port support" depends on ARM && ARCH_VT8500 @@ -1588,12 +1577,25 @@ config SERIAL_IFX6X60 Support for the IFX6x60 modem devices on Intel MID platforms. config SERIAL_PCH_UART - tristate "Intel EG20T PCH UART" - depends on PCI && DMADEVICES + tristate "Intel EG20T PCH UART/OKI SEMICONDUCTOR ML7213 IOH" + depends on PCI select SERIAL_CORE - select PCH_DMA help This driver is for PCH(Platform controller Hub) UART of Intel EG20T which is an IOH(Input/Output Hub) for x86 embedded processor. Enabling PCH_DMA, this PCH UART works as DMA mode. + + This driver also can be used for OKI SEMICONDUCTOR ML7213 IOH(Input/ + Output Hub) which is for IVI(In-Vehicle Infotainment) use. + ML7213 is companion chip for Intel Atom E6xx series. + ML7213 is completely compatible for Intel EG20T PCH. + +config SERIAL_MSM_SMD + bool "Enable tty device interface for some SMD ports" + default n + depends on MSM_SMD + help + Enables userspace clients to read and write to some streaming SMD + ports via tty device interface for MSM chipset. + endmenu diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile index 8ea92e9..31e868c 100644 --- a/drivers/tty/serial/Makefile +++ b/drivers/tty/serial/Makefile @@ -54,7 +54,6 @@ obj-$(CONFIG_SERIAL_68328) += 68328serial.o obj-$(CONFIG_SERIAL_68360) += 68360serial.o obj-$(CONFIG_SERIAL_MCF) += mcf.o obj-$(CONFIG_SERIAL_PMACZILOG) += pmac_zilog.o -obj-$(CONFIG_SERIAL_LH7A40X) += serial_lh7a40x.o obj-$(CONFIG_SERIAL_DZ) += dz.o obj-$(CONFIG_SERIAL_ZS) += zs.o obj-$(CONFIG_SERIAL_SH_SCI) += sh-sci.o @@ -76,6 +75,7 @@ obj-$(CONFIG_SERIAL_SGI_IOC3) += ioc3_serial.o obj-$(CONFIG_SERIAL_ATMEL) += atmel_serial.o obj-$(CONFIG_SERIAL_UARTLITE) += uartlite.o obj-$(CONFIG_SERIAL_MSM) += msm_serial.o +obj-$(CONFIG_SERIAL_MSM_HS) += msm_serial_hs.o obj-$(CONFIG_SERIAL_NETX) += netx-serial.o obj-$(CONFIG_SERIAL_OF_PLATFORM) += of_serial.o obj-$(CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL) += nwpserial.o @@ -92,3 +92,4 @@ obj-$(CONFIG_SERIAL_MRST_MAX3110) += mrst_max3110.o obj-$(CONFIG_SERIAL_MFD_HSU) += mfd.o obj-$(CONFIG_SERIAL_IFX6X60) += ifx6x60.o obj-$(CONFIG_SERIAL_PCH_UART) += pch_uart.o +obj-$(CONFIG_SERIAL_MSM_SMD) += msm_smd_tty.o diff --git a/drivers/tty/serial/altera_jtaguart.c b/drivers/tty/serial/altera_jtaguart.c index f9b49b5..60e049b 100644 --- a/drivers/tty/serial/altera_jtaguart.c +++ b/drivers/tty/serial/altera_jtaguart.c @@ -305,28 +305,6 @@ static struct altera_jtaguart altera_jtaguart_ports[ALTERA_JTAGUART_MAXPORTS]; #if defined(CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE) -int __init early_altera_jtaguart_setup(struct altera_jtaguart_platform_uart - *platp) -{ - struct uart_port *port; - int i; - - for (i = 0; i < ALTERA_JTAGUART_MAXPORTS && platp[i].mapbase; i++) { - port = &altera_jtaguart_ports[i].port; - - port->line = i; - port->type = PORT_ALTERA_JTAGUART; - port->mapbase = platp[i].mapbase; - port->membase = ioremap(port->mapbase, ALTERA_JTAGUART_SIZE); - port->iotype = SERIAL_IO_MEM; - port->irq = platp[i].irq; - port->flags = ASYNC_BOOT_AUTOCONF; - port->ops = &altera_jtaguart_ops; - } - - return 0; -} - #if defined(CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE_BYPASS) static void altera_jtaguart_console_putc(struct console *co, const char c) { @@ -384,7 +362,7 @@ static int __init altera_jtaguart_console_setup(struct console *co, if (co->index < 0 || co->index >= ALTERA_JTAGUART_MAXPORTS) return -EINVAL; port = &altera_jtaguart_ports[co->index].port; - if (port->membase == 0) + if (port->membase == NULL) return -ENODEV; return 0; } @@ -431,22 +409,45 @@ static int __devinit altera_jtaguart_probe(struct platform_device *pdev) { struct altera_jtaguart_platform_uart *platp = pdev->dev.platform_data; struct uart_port *port; - int i; + struct resource *res_irq, *res_mem; + int i = pdev->id; - for (i = 0; i < ALTERA_JTAGUART_MAXPORTS && platp[i].mapbase; i++) { - port = &altera_jtaguart_ports[i].port; + /* -1 emphasizes that the platform must have one port, no .N suffix */ + if (i == -1) + i = 0; - port->line = i; - port->type = PORT_ALTERA_JTAGUART; - port->mapbase = platp[i].mapbase; - port->membase = ioremap(port->mapbase, ALTERA_JTAGUART_SIZE); - port->iotype = SERIAL_IO_MEM; - port->irq = platp[i].irq; - port->ops = &altera_jtaguart_ops; - port->flags = ASYNC_BOOT_AUTOCONF; + if (i >= ALTERA_JTAGUART_MAXPORTS) + return -EINVAL; - uart_add_one_port(&altera_jtaguart_driver, port); - } + port = &altera_jtaguart_ports[i].port; + + res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (res_mem) + port->mapbase = res_mem->start; + else if (platp) + port->mapbase = platp->mapbase; + else + return -ENODEV; + + res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (res_irq) + port->irq = res_irq->start; + else if (platp) + port->irq = platp->irq; + else + return -ENODEV; + + port->membase = ioremap(port->mapbase, ALTERA_JTAGUART_SIZE); + if (!port->membase) + return -ENOMEM; + + port->line = i; + port->type = PORT_ALTERA_JTAGUART; + port->iotype = SERIAL_IO_MEM; + port->ops = &altera_jtaguart_ops; + port->flags = UPF_BOOT_AUTOCONF; + + uart_add_one_port(&altera_jtaguart_driver, port); return 0; } @@ -454,23 +455,34 @@ static int __devinit altera_jtaguart_probe(struct platform_device *pdev) static int __devexit altera_jtaguart_remove(struct platform_device *pdev) { struct uart_port *port; - int i; + int i = pdev->id; - for (i = 0; i < ALTERA_JTAGUART_MAXPORTS; i++) { - port = &altera_jtaguart_ports[i].port; - if (port) - uart_remove_one_port(&altera_jtaguart_driver, port); - } + if (i == -1) + i = 0; + + port = &altera_jtaguart_ports[i].port; + uart_remove_one_port(&altera_jtaguart_driver, port); return 0; } +#ifdef CONFIG_OF +static struct of_device_id altera_jtaguart_match[] = { + { .compatible = "ALTR,juart-1.0", }, + {}, +}; +MODULE_DEVICE_TABLE(of, altera_jtaguart_match); +#else +#define altera_jtaguart_match NULL +#endif /* CONFIG_OF */ + static struct platform_driver altera_jtaguart_platform_driver = { .probe = altera_jtaguart_probe, .remove = __devexit_p(altera_jtaguart_remove), .driver = { - .name = DRV_NAME, - .owner = THIS_MODULE, + .name = DRV_NAME, + .owner = THIS_MODULE, + .of_match_table = altera_jtaguart_match, }, }; diff --git a/drivers/tty/serial/altera_uart.c b/drivers/tty/serial/altera_uart.c index 7212162..6d5b036 100644 --- a/drivers/tty/serial/altera_uart.c +++ b/drivers/tty/serial/altera_uart.c @@ -24,6 +24,7 @@ #include <linux/serial.h> #include <linux/serial_core.h> #include <linux/platform_device.h> +#include <linux/of.h> #include <linux/io.h> #include <linux/altera_uart.h> @@ -86,16 +87,12 @@ struct altera_uart { static u32 altera_uart_readl(struct uart_port *port, int reg) { - struct altera_uart_platform_uart *platp = port->private_data; - - return readl(port->membase + (reg << platp->bus_shift)); + return readl(port->membase + (reg << port->regshift)); } static void altera_uart_writel(struct uart_port *port, u32 dat, int reg) { - struct altera_uart_platform_uart *platp = port->private_data; - - writel(dat, port->membase + (reg << platp->bus_shift)); + writel(dat, port->membase + (reg << port->regshift)); } static unsigned int altera_uart_tx_empty(struct uart_port *port) @@ -511,6 +508,29 @@ static struct uart_driver altera_uart_driver = { .cons = ALTERA_UART_CONSOLE, }; +#ifdef CONFIG_OF +static int altera_uart_get_of_uartclk(struct platform_device *pdev, + struct uart_port *port) +{ + int len; + const __be32 *clk; + + clk = of_get_property(pdev->dev.of_node, "clock-frequency", &len); + if (!clk || len < sizeof(__be32)) + return -ENODEV; + + port->uartclk = be32_to_cpup(clk); + + return 0; +} +#else +static int altera_uart_get_of_uartclk(struct platform_device *pdev, + struct uart_port *port) +{ + return -ENODEV; +} +#endif /* CONFIG_OF */ + static int __devinit altera_uart_probe(struct platform_device *pdev) { struct altera_uart_platform_uart *platp = pdev->dev.platform_data; @@ -518,6 +538,7 @@ static int __devinit altera_uart_probe(struct platform_device *pdev) struct resource *res_mem; struct resource *res_irq; int i = pdev->id; + int ret; /* -1 emphasizes that the platform must have one port, no .N suffix */ if (i == -1) @@ -542,17 +563,29 @@ static int __devinit altera_uart_probe(struct platform_device *pdev) else if (platp->irq) port->irq = platp->irq; + /* Check platform data first so we can override device node data */ + if (platp) + port->uartclk = platp->uartclk; + else { + ret = altera_uart_get_of_uartclk(pdev, port); + if (ret) + return ret; + } + port->membase = ioremap(port->mapbase, ALTERA_UART_SIZE); if (!port->membase) return -ENOMEM; + if (platp) + port->regshift = platp->bus_shift; + else + port->regshift = 0; + port->line = i; port->type = PORT_ALTERA_UART; port->iotype = SERIAL_IO_MEM; - port->uartclk = platp->uartclk; port->ops = &altera_uart_ops; port->flags = UPF_BOOT_AUTOCONF; - port->private_data = platp; uart_add_one_port(&altera_uart_driver, port); @@ -561,19 +594,35 @@ static int __devinit altera_uart_probe(struct platform_device *pdev) static int __devexit altera_uart_remove(struct platform_device *pdev) { - struct uart_port *port = &altera_uart_ports[pdev->id].port; + struct uart_port *port; + int i = pdev->id; + + if (i == -1) + i = 0; + port = &altera_uart_ports[i].port; uart_remove_one_port(&altera_uart_driver, port); + return 0; } +#ifdef CONFIG_OF +static struct of_device_id altera_uart_match[] = { + { .compatible = "ALTR,uart-1.0", }, + {}, +}; +MODULE_DEVICE_TABLE(of, altera_uart_match); +#else +#define altera_uart_match NULL +#endif /* CONFIG_OF */ + static struct platform_driver altera_uart_platform_driver = { .probe = altera_uart_probe, .remove = __devexit_p(altera_uart_remove), .driver = { - .name = DRV_NAME, - .owner = THIS_MODULE, - .pm = NULL, + .name = DRV_NAME, + .owner = THIS_MODULE, + .of_match_table = altera_uart_match, }, }; diff --git a/drivers/tty/serial/apbuart.c b/drivers/tty/serial/apbuart.c index 095a5d5..1ab999b 100644 --- a/drivers/tty/serial/apbuart.c +++ b/drivers/tty/serial/apbuart.c @@ -553,8 +553,7 @@ static struct uart_driver grlib_apbuart_driver = { /* OF Platform Driver */ /* ======================================================================== */ -static int __devinit apbuart_probe(struct platform_device *op, - const struct of_device_id *match) +static int __devinit apbuart_probe(struct platform_device *op) { int i = -1; struct uart_port *port = NULL; @@ -587,7 +586,7 @@ static struct of_device_id __initdata apbuart_match[] = { {}, }; -static struct of_platform_driver grlib_apbuart_of_driver = { +static struct platform_driver grlib_apbuart_of_driver = { .probe = apbuart_probe, .driver = { .owner = THIS_MODULE, @@ -676,10 +675,10 @@ static int __init grlib_apbuart_init(void) return ret; } - ret = of_register_platform_driver(&grlib_apbuart_of_driver); + ret = platform_driver_register(&grlib_apbuart_of_driver); if (ret) { printk(KERN_ERR - "%s: of_register_platform_driver failed (%i)\n", + "%s: platform_driver_register failed (%i)\n", __FILE__, ret); uart_unregister_driver(&grlib_apbuart_driver); return ret; @@ -697,7 +696,7 @@ static void __exit grlib_apbuart_exit(void) &grlib_apbuart_ports[i]); uart_unregister_driver(&grlib_apbuart_driver); - of_unregister_platform_driver(&grlib_apbuart_of_driver); + platform_driver_unregister(&grlib_apbuart_of_driver); } module_init(grlib_apbuart_init); diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index 2a1d52f..f119d17 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -1240,6 +1240,21 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios, spin_unlock_irqrestore(&port->lock, flags); } +static void atmel_set_ldisc(struct uart_port *port, int new) +{ + int line = port->line; + + if (line >= port->state->port.tty->driver->num) + return; + + if (port->state->port.tty->ldisc->ops->num == N_PPS) { + port->flags |= UPF_HARDPPS_CD; + atmel_enable_ms(port); + } else { + port->flags &= ~UPF_HARDPPS_CD; + } +} + /* * Return string describing the specified port */ @@ -1380,6 +1395,7 @@ static struct uart_ops atmel_pops = { .shutdown = atmel_shutdown, .flush_buffer = atmel_flush_buffer, .set_termios = atmel_set_termios, + .set_ldisc = atmel_set_ldisc, .type = atmel_type, .release_port = atmel_release_port, .request_port = atmel_request_port, diff --git a/drivers/tty/serial/bfin_sport_uart.c b/drivers/tty/serial/bfin_sport_uart.c index e95c524..c3ec0a6 100644 --- a/drivers/tty/serial/bfin_sport_uart.c +++ b/drivers/tty/serial/bfin_sport_uart.c @@ -788,7 +788,7 @@ static int __devinit sport_uart_probe(struct platform_device *pdev) sport->port.mapbase = res->start; sport->port.irq = platform_get_irq(pdev, 0); - if (sport->port.irq < 0) { + if ((int)sport->port.irq < 0) { dev_err(&pdev->dev, "No sport RX/TX IRQ specified\n"); ret = -ENOENT; goto out_error_unmap; diff --git a/drivers/tty/serial/cpm_uart/cpm_uart_core.c b/drivers/tty/serial/cpm_uart/cpm_uart_core.c index 8692ff9..a9a6a5f 100644 --- a/drivers/tty/serial/cpm_uart/cpm_uart_core.c +++ b/drivers/tty/serial/cpm_uart/cpm_uart_core.c @@ -1359,8 +1359,7 @@ static struct uart_driver cpm_reg = { static int probe_index; -static int __devinit cpm_uart_probe(struct platform_device *ofdev, - const struct of_device_id *match) +static int __devinit cpm_uart_probe(struct platform_device *ofdev) { int index = probe_index++; struct uart_cpm_port *pinfo = &cpm_uart_ports[index]; @@ -1405,7 +1404,7 @@ static struct of_device_id cpm_uart_match[] = { {} }; -static struct of_platform_driver cpm_uart_driver = { +static struct platform_driver cpm_uart_driver = { .driver = { .name = "cpm_uart", .owner = THIS_MODULE, @@ -1421,7 +1420,7 @@ static int __init cpm_uart_init(void) if (ret) return ret; - ret = of_register_platform_driver(&cpm_uart_driver); + ret = platform_driver_register(&cpm_uart_driver); if (ret) uart_unregister_driver(&cpm_reg); @@ -1430,7 +1429,7 @@ static int __init cpm_uart_init(void) static void __exit cpm_uart_exit(void) { - of_unregister_platform_driver(&cpm_uart_driver); + platform_driver_unregister(&cpm_uart_driver); uart_unregister_driver(&cpm_reg); } diff --git a/drivers/tty/serial/crisv10.c b/drivers/tty/serial/crisv10.c index bcc31f2..225123b 100644 --- a/drivers/tty/serial/crisv10.c +++ b/drivers/tty/serial/crisv10.c @@ -3581,8 +3581,7 @@ rs_break(struct tty_struct *tty, int break_state) } static int -rs_tiocmset(struct tty_struct *tty, struct file *file, - unsigned int set, unsigned int clear) +rs_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct e100_serial *info = (struct e100_serial *)tty->driver_data; unsigned long flags; @@ -3614,7 +3613,7 @@ rs_tiocmset(struct tty_struct *tty, struct file *file, } static int -rs_tiocmget(struct tty_struct *tty, struct file *file) +rs_tiocmget(struct tty_struct *tty) { struct e100_serial *info = (struct e100_serial *)tty->driver_data; unsigned int result; @@ -3648,7 +3647,7 @@ rs_tiocmget(struct tty_struct *tty, struct file *file) static int -rs_ioctl(struct tty_struct *tty, struct file * file, +rs_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct e100_serial * info = (struct e100_serial *)tty->driver_data; diff --git a/drivers/tty/serial/ifx6x60.c b/drivers/tty/serial/ifx6x60.c index ab93763..8ee5a41 100644 --- a/drivers/tty/serial/ifx6x60.c +++ b/drivers/tty/serial/ifx6x60.c @@ -8,7 +8,7 @@ * Jan Dumon <j.dumon@option.com> * * Copyright (C) 2009, 2010 Intel Corp - * Russ Gorby <richardx.r.gorby@intel.com> + * Russ Gorby <russ.gorby@intel.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -67,6 +67,7 @@ #define IFX_SPI_MORE_MASK 0x10 #define IFX_SPI_MORE_BIT 12 /* bit position in u16 */ #define IFX_SPI_CTS_BIT 13 /* bit position in u16 */ +#define IFX_SPI_MODE SPI_MODE_1 #define IFX_SPI_TTY_ID 0 #define IFX_SPI_TIMEOUT_SEC 2 #define IFX_SPI_HEADER_0 (-1) @@ -76,7 +77,7 @@ static void ifx_spi_handle_srdy(struct ifx_spi_device *ifx_dev); /* local variables */ -static int spi_b16 = 1; /* 8 or 16 bit word length */ +static int spi_bpw = 16; /* 8, 16 or 32 bit word length */ static struct tty_driver *tty_drv; static struct ifx_spi_device *saved_ifx_dev; static struct lock_class_key ifx_spi_key; @@ -244,7 +245,7 @@ static void ifx_spi_timeout(unsigned long arg) * Map the signal state into Linux modem flags and report the value * in Linux terms */ -static int ifx_spi_tiocmget(struct tty_struct *tty, struct file *filp) +static int ifx_spi_tiocmget(struct tty_struct *tty) { unsigned int value; struct ifx_spi_device *ifx_dev = tty->driver_data; @@ -262,7 +263,6 @@ static int ifx_spi_tiocmget(struct tty_struct *tty, struct file *filp) /** * ifx_spi_tiocmset - set modem bits * @tty: the tty structure - * @filp: file handle issuing the request * @set: bits to set * @clear: bits to clear * @@ -271,7 +271,7 @@ static int ifx_spi_tiocmget(struct tty_struct *tty, struct file *filp) * * FIXME: do we need to kick the tranfers when we do this ? */ -static int ifx_spi_tiocmset(struct tty_struct *tty, struct file *filp, +static int ifx_spi_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct ifx_spi_device *ifx_dev = tty->driver_data; @@ -722,9 +722,9 @@ static void ifx_spi_io(unsigned long data) /* note len is BYTES, not transfers */ ifx_dev->spi_xfer.len = IFX_SPI_TRANSFER_SIZE; ifx_dev->spi_xfer.cs_change = 0; - ifx_dev->spi_xfer.speed_hz = 12500000; + ifx_dev->spi_xfer.speed_hz = ifx_dev->spi_dev->max_speed_hz; /* ifx_dev->spi_xfer.speed_hz = 390625; */ - ifx_dev->spi_xfer.bits_per_word = spi_b16 ? 16 : 8; + ifx_dev->spi_xfer.bits_per_word = spi_bpw; ifx_dev->spi_xfer.tx_buf = ifx_dev->tx_buffer; ifx_dev->spi_xfer.rx_buf = ifx_dev->rx_buffer; @@ -732,7 +732,7 @@ static void ifx_spi_io(unsigned long data) /* * setup dma pointers */ - if (ifx_dev->is_6160) { + if (ifx_dev->use_dma) { ifx_dev->spi_msg.is_dma_mapped = 1; ifx_dev->tx_dma = ifx_dev->tx_bus; ifx_dev->rx_dma = ifx_dev->rx_bus; @@ -798,8 +798,8 @@ static int ifx_spi_create_port(struct ifx_spi_device *ifx_dev) goto error_ret; } - pport->ops = &ifx_tty_port_ops; tty_port_init(pport); + pport->ops = &ifx_tty_port_ops; ifx_dev->minor = IFX_SPI_TTY_ID; ifx_dev->tty_dev = tty_register_device(tty_drv, ifx_dev->minor, &ifx_dev->spi_dev->dev); @@ -960,7 +960,7 @@ static int ifx_spi_spi_probe(struct spi_device *spi) { int ret; int srdy; - struct ifx_modem_platform_data *pl_data = NULL; + struct ifx_modem_platform_data *pl_data; struct ifx_spi_device *ifx_dev; if (saved_ifx_dev) { @@ -968,6 +968,12 @@ static int ifx_spi_spi_probe(struct spi_device *spi) return -ENODEV; } + pl_data = (struct ifx_modem_platform_data *)spi->dev.platform_data; + if (!pl_data) { + dev_err(&spi->dev, "missing platform data!"); + return -ENODEV; + } + /* initialize structure to hold our device variables */ ifx_dev = kzalloc(sizeof(struct ifx_spi_device), GFP_KERNEL); if (!ifx_dev) { @@ -983,14 +989,25 @@ static int ifx_spi_spi_probe(struct spi_device *spi) init_timer(&ifx_dev->spi_timer); ifx_dev->spi_timer.function = ifx_spi_timeout; ifx_dev->spi_timer.data = (unsigned long)ifx_dev; - ifx_dev->is_6160 = pl_data->is_6160; + ifx_dev->modem = pl_data->modem_type; + ifx_dev->use_dma = pl_data->use_dma; + ifx_dev->max_hz = pl_data->max_hz; + /* initialize spi mode, etc */ + spi->max_speed_hz = ifx_dev->max_hz; + spi->mode = IFX_SPI_MODE | (SPI_LOOP & spi->mode); + spi->bits_per_word = spi_bpw; + ret = spi_setup(spi); + if (ret) { + dev_err(&spi->dev, "SPI setup wasn't successful %d", ret); + return -ENODEV; + } /* ensure SPI protocol flags are initialized to enable transfer */ ifx_dev->spi_more = 0; ifx_dev->spi_slave_cts = 0; /*initialize transfer and dma buffers */ - ifx_dev->tx_buffer = dma_alloc_coherent(&ifx_dev->spi_dev->dev, + ifx_dev->tx_buffer = dma_alloc_coherent(ifx_dev->spi_dev->dev.parent, IFX_SPI_TRANSFER_SIZE, &ifx_dev->tx_bus, GFP_KERNEL); @@ -999,7 +1016,7 @@ static int ifx_spi_spi_probe(struct spi_device *spi) ret = -ENOMEM; goto error_ret; } - ifx_dev->rx_buffer = dma_alloc_coherent(&ifx_dev->spi_dev->dev, + ifx_dev->rx_buffer = dma_alloc_coherent(ifx_dev->spi_dev->dev.parent, IFX_SPI_TRANSFER_SIZE, &ifx_dev->rx_bus, GFP_KERNEL); @@ -1025,18 +1042,11 @@ static int ifx_spi_spi_probe(struct spi_device *spi) goto error_ret; } - pl_data = (struct ifx_modem_platform_data *)spi->dev.platform_data; - if (pl_data) { - ifx_dev->gpio.reset = pl_data->rst_pmu; - ifx_dev->gpio.po = pl_data->pwr_on; - ifx_dev->gpio.mrdy = pl_data->mrdy; - ifx_dev->gpio.srdy = pl_data->srdy; - ifx_dev->gpio.reset_out = pl_data->rst_out; - } else { - dev_err(&spi->dev, "missing platform data!"); - ret = -ENODEV; - goto error_ret; - } + ifx_dev->gpio.reset = pl_data->rst_pmu; + ifx_dev->gpio.po = pl_data->pwr_on; + ifx_dev->gpio.mrdy = pl_data->mrdy; + ifx_dev->gpio.srdy = pl_data->srdy; + ifx_dev->gpio.reset_out = pl_data->rst_out; dev_info(&spi->dev, "gpios %d, %d, %d, %d, %d", ifx_dev->gpio.reset, ifx_dev->gpio.po, ifx_dev->gpio.mrdy, @@ -1322,9 +1332,9 @@ static const struct spi_device_id ifx_id_table[] = { MODULE_DEVICE_TABLE(spi, ifx_id_table); /* spi operations */ -static const struct spi_driver ifx_spi_driver_6160 = { +static const struct spi_driver ifx_spi_driver = { .driver = { - .name = "ifx6160", + .name = DRVNAME, .bus = &spi_bus_type, .pm = &ifx_spi_pm, .owner = THIS_MODULE}, @@ -1346,7 +1356,7 @@ static void __exit ifx_spi_exit(void) { /* unregister */ tty_unregister_driver(tty_drv); - spi_unregister_driver((void *)&ifx_spi_driver_6160); + spi_unregister_driver((void *)&ifx_spi_driver); } /** @@ -1388,7 +1398,7 @@ static int __init ifx_spi_init(void) return result; } - result = spi_register_driver((void *)&ifx_spi_driver_6160); + result = spi_register_driver((void *)&ifx_spi_driver); if (result) { pr_err("%s: spi_register_driver failed(%d)", DRVNAME, result); diff --git a/drivers/tty/serial/ifx6x60.h b/drivers/tty/serial/ifx6x60.h index deb7b8d..e8464ba 100644 --- a/drivers/tty/serial/ifx6x60.h +++ b/drivers/tty/serial/ifx6x60.h @@ -29,8 +29,6 @@ #define DRVNAME "ifx6x60" #define TTYNAME "ttyIFX" -/* #define IFX_THROTTLE_CODE */ - #define IFX_SPI_MAX_MINORS 1 #define IFX_SPI_TRANSFER_SIZE 2048 #define IFX_SPI_FIFO_SIZE 4096 @@ -88,7 +86,9 @@ struct ifx_spi_device { dma_addr_t rx_dma; dma_addr_t tx_dma; - int is_6160; /* Modem type */ + int modem; /* Modem type */ + int use_dma; /* provide dma-able addrs in SPI msg */ + long max_hz; /* max SPI frequency */ spinlock_t write_lock; int write_pending; diff --git a/drivers/tty/serial/max3100.c b/drivers/tty/serial/max3100.c index beb1afa..7b951ad 100644 --- a/drivers/tty/serial/max3100.c +++ b/drivers/tty/serial/max3100.c @@ -601,7 +601,7 @@ static int max3100_startup(struct uart_port *port) s->rts = 0; sprintf(b, "max3100-%d", s->minor); - s->workqueue = create_freezeable_workqueue(b); + s->workqueue = create_freezable_workqueue(b); if (!s->workqueue) { dev_warn(&s->spi->dev, "cannot create workqueue\n"); return -EBUSY; diff --git a/drivers/tty/serial/max3107.c b/drivers/tty/serial/max3107.c index 910870e..750b4f6 100644 --- a/drivers/tty/serial/max3107.c +++ b/drivers/tty/serial/max3107.c @@ -833,7 +833,7 @@ static int max3107_startup(struct uart_port *port) struct max3107_port *s = container_of(port, struct max3107_port, port); /* Initialize work queue */ - s->workqueue = create_freezeable_workqueue("max3107"); + s->workqueue = create_freezable_workqueue("max3107"); if (!s->workqueue) { dev_err(&s->spi->dev, "Workqueue creation failed\n"); return -EBUSY; diff --git a/drivers/tty/serial/mfd.c b/drivers/tty/serial/mfd.c index d40010a..c111f36 100644 --- a/drivers/tty/serial/mfd.c +++ b/drivers/tty/serial/mfd.c @@ -16,9 +16,7 @@ * 2/3 chan to port 1, 4/5 chan to port 3. Even number chans * are used for RX, odd chans for TX * - * 2. In A0 stepping, UART will not support TX half empty flag - * - * 3. The RI/DSR/DCD/DTR are not pinned out, DCD & DSR are always + * 2. The RI/DSR/DCD/DTR are not pinned out, DCD & DSR are always * asserted, only when the HW is reset the DDCD and DDSR will * be triggered */ @@ -41,8 +39,6 @@ #include <linux/io.h> #include <linux/debugfs.h> -#define MFD_HSU_A0_STEPPING 1 - #define HSU_DMA_BUF_SIZE 2048 #define chan_readl(chan, offset) readl(chan->reg + offset) @@ -51,7 +47,10 @@ #define mfd_readl(obj, offset) readl(obj->reg + offset) #define mfd_writel(obj, offset, val) writel(val, obj->reg + offset) -#define HSU_DMA_TIMEOUT_CHECK_FREQ (HZ/10) +static int hsu_dma_enable; +module_param(hsu_dma_enable, int, 0); +MODULE_PARM_DESC(hsu_dma_enable, "It is a bitmap to set working mode, if \ +bit[x] is 1, then port[x] will work in DMA mode, otherwise in PIO mode."); struct hsu_dma_buffer { u8 *buf; @@ -65,7 +64,6 @@ struct hsu_dma_chan { enum dma_data_direction dirt; struct uart_hsu_port *uport; void __iomem *reg; - struct timer_list rx_timer; /* only needed by RX channel */ }; struct uart_hsu_port { @@ -355,8 +353,6 @@ void hsu_dma_start_rx_chan(struct hsu_dma_chan *rxc, struct hsu_dma_buffer *dbuf | (0x1 << 24) /* timeout bit, see HSU Errata 1 */ ); chan_writel(rxc, HSU_CH_CR, 0x3); - - mod_timer(&rxc->rx_timer, jiffies + HSU_DMA_TIMEOUT_CHECK_FREQ); } /* Protected by spin_lock_irqsave(port->lock) */ @@ -420,7 +416,6 @@ void hsu_dma_rx(struct uart_hsu_port *up, u32 int_sts) chan_writel(chan, HSU_CH_CR, 0x3); return; } - del_timer(&chan->rx_timer); dma_sync_single_for_cpu(port->dev, dbuf->dma_addr, dbuf->dma_size, DMA_FROM_DEVICE); @@ -448,8 +443,6 @@ void hsu_dma_rx(struct uart_hsu_port *up, u32 int_sts) tty_flip_buffer_push(tty); chan_writel(chan, HSU_CH_CR, 0x3); - chan->rx_timer.expires = jiffies + HSU_DMA_TIMEOUT_CHECK_FREQ; - add_timer(&chan->rx_timer); } @@ -551,16 +544,9 @@ static void transmit_chars(struct uart_hsu_port *up) return; } -#ifndef MFD_HSU_A0_STEPPING + /* The IRQ is for TX FIFO half-empty */ count = up->port.fifosize / 2; -#else - /* - * A0 only supports fully empty IRQ, and the first char written - * into it won't clear the EMPT bit, so we may need be cautious - * by useing a shorter buffer - */ - count = up->port.fifosize - 4; -#endif + do { serial_out(up, UART_TX, xmit->buf[xmit->tail]); xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); @@ -769,9 +755,8 @@ static void serial_hsu_break_ctl(struct uart_port *port, int break_state) /* * What special to do: * 1. chose the 64B fifo mode - * 2. make sure not to select half empty mode for A0 stepping - * 3. start dma or pio depends on configuration - * 4. we only allocate dma memory when needed + * 2. start dma or pio depends on configuration + * 3. we only allocate dma memory when needed */ static int serial_hsu_startup(struct uart_port *port) { @@ -870,8 +855,6 @@ static void serial_hsu_shutdown(struct uart_port *port) container_of(port, struct uart_hsu_port, port); unsigned long flags; - del_timer_sync(&up->rxc->rx_timer); - /* Disable interrupts from this port */ up->ier = 0; serial_out(up, UART_IER, 0); @@ -977,10 +960,6 @@ serial_hsu_set_termios(struct uart_port *port, struct ktermios *termios, fcr = UART_FCR_ENABLE_FIFO | UART_FCR_HSU_64_32B; fcr |= UART_FCR_HSU_64B_FIFO; -#ifdef MFD_HSU_A0_STEPPING - /* A0 doesn't support half empty IRQ */ - fcr |= UART_FCR_FULL_EMPT_TXI; -#endif /* * Ok, we're now changing the port state. Do it with @@ -1343,28 +1322,6 @@ err_disable: return ret; } -static void hsu_dma_rx_timeout(unsigned long data) -{ - struct hsu_dma_chan *chan = (void *)data; - struct uart_hsu_port *up = chan->uport; - struct hsu_dma_buffer *dbuf = &up->rxbuf; - int count = 0; - unsigned long flags; - - spin_lock_irqsave(&up->port.lock, flags); - - count = chan_readl(chan, HSU_CH_D0SAR) - dbuf->dma_addr; - - if (!count) { - mod_timer(&chan->rx_timer, jiffies + HSU_DMA_TIMEOUT_CHECK_FREQ); - goto exit; - } - - hsu_dma_rx(up, 0); -exit: - spin_unlock_irqrestore(&up->port.lock, flags); -} - static void hsu_global_init(void) { struct hsu_port *hsu; @@ -1415,6 +1372,12 @@ static void hsu_global_init(void) serial_hsu_ports[i] = uport; uport->index = i; + + if (hsu_dma_enable & (1<<i)) + uport->use_dma = 1; + else + uport->use_dma = 0; + uport++; } @@ -1427,12 +1390,6 @@ static void hsu_global_init(void) dchan->reg = hsu->reg + HSU_DMA_CHANS_REG_OFFSET + i * HSU_DMA_CHANS_REG_LENGTH; - /* Work around for RX */ - if (dchan->dirt == DMA_FROM_DEVICE) { - init_timer(&dchan->rx_timer); - dchan->rx_timer.function = hsu_dma_rx_timeout; - dchan->rx_timer.data = (unsigned long)dchan; - } dchan++; } diff --git a/drivers/tty/serial/mpc52xx_uart.c b/drivers/tty/serial/mpc52xx_uart.c index 126ec7f..a0bcd8a 100644 --- a/drivers/tty/serial/mpc52xx_uart.c +++ b/drivers/tty/serial/mpc52xx_uart.c @@ -1302,8 +1302,7 @@ static struct of_device_id mpc52xx_uart_of_match[] = { {}, }; -static int __devinit -mpc52xx_uart_of_probe(struct platform_device *op, const struct of_device_id *match) +static int __devinit mpc52xx_uart_of_probe(struct platform_device *op) { int idx = -1; unsigned int uartclk; @@ -1311,8 +1310,6 @@ mpc52xx_uart_of_probe(struct platform_device *op, const struct of_device_id *mat struct resource res; int ret; - dev_dbg(&op->dev, "mpc52xx_uart_probe(op=%p, match=%p)\n", op, match); - /* Check validity & presence */ for (idx = 0; idx < MPC52xx_PSC_MAXNUM; idx++) if (mpc52xx_uart_nodes[idx] == op->dev.of_node) @@ -1453,7 +1450,7 @@ mpc52xx_uart_of_enumerate(void) MODULE_DEVICE_TABLE(of, mpc52xx_uart_of_match); -static struct of_platform_driver mpc52xx_uart_of_driver = { +static struct platform_driver mpc52xx_uart_of_driver = { .probe = mpc52xx_uart_of_probe, .remove = mpc52xx_uart_of_remove, #ifdef CONFIG_PM @@ -1497,9 +1494,9 @@ mpc52xx_uart_init(void) return ret; } - ret = of_register_platform_driver(&mpc52xx_uart_of_driver); + ret = platform_driver_register(&mpc52xx_uart_of_driver); if (ret) { - printk(KERN_ERR "%s: of_register_platform_driver failed (%i)\n", + printk(KERN_ERR "%s: platform_driver_register failed (%i)\n", __FILE__, ret); uart_unregister_driver(&mpc52xx_uart_driver); return ret; @@ -1514,7 +1511,7 @@ mpc52xx_uart_exit(void) if (psc_ops->fifoc_uninit) psc_ops->fifoc_uninit(); - of_unregister_platform_driver(&mpc52xx_uart_of_driver); + platform_driver_unregister(&mpc52xx_uart_of_driver); uart_unregister_driver(&mpc52xx_uart_driver); } diff --git a/drivers/tty/serial/mrst_max3110.c b/drivers/tty/serial/mrst_max3110.c index b62857b..37e13c3 100644 --- a/drivers/tty/serial/mrst_max3110.c +++ b/drivers/tty/serial/mrst_max3110.c @@ -51,7 +51,7 @@ struct uart_max3110 { struct uart_port port; struct spi_device *spi; - char name[24]; + char name[SPI_NAME_SIZE]; wait_queue_head_t wq; struct task_struct *main_thread; diff --git a/drivers/tty/serial/msm_serial_hs.c b/drivers/tty/serial/msm_serial_hs.c new file mode 100644 index 0000000..2e7fc9c --- /dev/null +++ b/drivers/tty/serial/msm_serial_hs.c @@ -0,0 +1,1880 @@ +/* + * MSM 7k/8k High speed uart driver + * + * Copyright (c) 2007-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2008 Google Inc. + * Modified: Nick Pelly <npelly@google.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + * See the GNU General Public License for more details. + * + * Has optional support for uart power management independent of linux + * suspend/resume: + * + * RX wakeup. + * UART wakeup can be triggered by RX activity (using a wakeup GPIO on the + * UART RX pin). This should only be used if there is not a wakeup + * GPIO on the UART CTS, and the first RX byte is known (for example, with the + * Bluetooth Texas Instruments HCILL protocol), since the first RX byte will + * always be lost. RTS will be asserted even while the UART is off in this mode + * of operation. See msm_serial_hs_platform_data.rx_wakeup_irq. + */ + +#include <linux/module.h> + +#include <linux/serial.h> +#include <linux/serial_core.h> +#include <linux/slab.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/io.h> +#include <linux/ioport.h> +#include <linux/kernel.h> +#include <linux/timer.h> +#include <linux/clk.h> +#include <linux/platform_device.h> +#include <linux/pm_runtime.h> +#include <linux/dma-mapping.h> +#include <linux/dmapool.h> +#include <linux/wait.h> +#include <linux/workqueue.h> + +#include <linux/atomic.h> +#include <asm/irq.h> +#include <asm/system.h> + +#include <mach/hardware.h> +#include <mach/dma.h> +#include <linux/platform_data/msm_serial_hs.h> + +/* HSUART Registers */ +#define UARTDM_MR1_ADDR 0x0 +#define UARTDM_MR2_ADDR 0x4 + +/* Data Mover result codes */ +#define RSLT_FIFO_CNTR_BMSK (0xE << 28) +#define RSLT_VLD BIT(1) + +/* write only register */ +#define UARTDM_CSR_ADDR 0x8 +#define UARTDM_CSR_115200 0xFF +#define UARTDM_CSR_57600 0xEE +#define UARTDM_CSR_38400 0xDD +#define UARTDM_CSR_28800 0xCC +#define UARTDM_CSR_19200 0xBB +#define UARTDM_CSR_14400 0xAA +#define UARTDM_CSR_9600 0x99 +#define UARTDM_CSR_7200 0x88 +#define UARTDM_CSR_4800 0x77 +#define UARTDM_CSR_3600 0x66 +#define UARTDM_CSR_2400 0x55 +#define UARTDM_CSR_1200 0x44 +#define UARTDM_CSR_600 0x33 +#define UARTDM_CSR_300 0x22 +#define UARTDM_CSR_150 0x11 +#define UARTDM_CSR_75 0x00 + +/* write only register */ +#define UARTDM_TF_ADDR 0x70 +#define UARTDM_TF2_ADDR 0x74 +#define UARTDM_TF3_ADDR 0x78 +#define UARTDM_TF4_ADDR 0x7C + +/* write only register */ +#define UARTDM_CR_ADDR 0x10 +#define UARTDM_IMR_ADDR 0x14 + +#define UARTDM_IPR_ADDR 0x18 +#define UARTDM_TFWR_ADDR 0x1c +#define UARTDM_RFWR_ADDR 0x20 +#define UARTDM_HCR_ADDR 0x24 +#define UARTDM_DMRX_ADDR 0x34 +#define UARTDM_IRDA_ADDR 0x38 +#define UARTDM_DMEN_ADDR 0x3c + +/* UART_DM_NO_CHARS_FOR_TX */ +#define UARTDM_NCF_TX_ADDR 0x40 + +#define UARTDM_BADR_ADDR 0x44 + +#define UARTDM_SIM_CFG_ADDR 0x80 +/* Read Only register */ +#define UARTDM_SR_ADDR 0x8 + +/* Read Only register */ +#define UARTDM_RF_ADDR 0x70 +#define UARTDM_RF2_ADDR 0x74 +#define UARTDM_RF3_ADDR 0x78 +#define UARTDM_RF4_ADDR 0x7C + +/* Read Only register */ +#define UARTDM_MISR_ADDR 0x10 + +/* Read Only register */ +#define UARTDM_ISR_ADDR 0x14 +#define UARTDM_RX_TOTAL_SNAP_ADDR 0x38 + +#define UARTDM_RXFS_ADDR 0x50 + +/* Register field Mask Mapping */ +#define UARTDM_SR_PAR_FRAME_BMSK BIT(5) +#define UARTDM_SR_OVERRUN_BMSK BIT(4) +#define UARTDM_SR_TXEMT_BMSK BIT(3) +#define UARTDM_SR_TXRDY_BMSK BIT(2) +#define UARTDM_SR_RXRDY_BMSK BIT(0) + +#define UARTDM_CR_TX_DISABLE_BMSK BIT(3) +#define UARTDM_CR_RX_DISABLE_BMSK BIT(1) +#define UARTDM_CR_TX_EN_BMSK BIT(2) +#define UARTDM_CR_RX_EN_BMSK BIT(0) + +/* UARTDM_CR channel_comman bit value (register field is bits 8:4) */ +#define RESET_RX 0x10 +#define RESET_TX 0x20 +#define RESET_ERROR_STATUS 0x30 +#define RESET_BREAK_INT 0x40 +#define START_BREAK 0x50 +#define STOP_BREAK 0x60 +#define RESET_CTS 0x70 +#define RESET_STALE_INT 0x80 +#define RFR_LOW 0xD0 +#define RFR_HIGH 0xE0 +#define CR_PROTECTION_EN 0x100 +#define STALE_EVENT_ENABLE 0x500 +#define STALE_EVENT_DISABLE 0x600 +#define FORCE_STALE_EVENT 0x400 +#define CLEAR_TX_READY 0x300 +#define RESET_TX_ERROR 0x800 +#define RESET_TX_DONE 0x810 + +#define UARTDM_MR1_AUTO_RFR_LEVEL1_BMSK 0xffffff00 +#define UARTDM_MR1_AUTO_RFR_LEVEL0_BMSK 0x3f +#define UARTDM_MR1_CTS_CTL_BMSK 0x40 +#define UARTDM_MR1_RX_RDY_CTL_BMSK 0x80 + +#define UARTDM_MR2_ERROR_MODE_BMSK 0x40 +#define UARTDM_MR2_BITS_PER_CHAR_BMSK 0x30 + +/* bits per character configuration */ +#define FIVE_BPC (0 << 4) +#define SIX_BPC (1 << 4) +#define SEVEN_BPC (2 << 4) +#define EIGHT_BPC (3 << 4) + +#define UARTDM_MR2_STOP_BIT_LEN_BMSK 0xc +#define STOP_BIT_ONE (1 << 2) +#define STOP_BIT_TWO (3 << 2) + +#define UARTDM_MR2_PARITY_MODE_BMSK 0x3 + +/* Parity configuration */ +#define NO_PARITY 0x0 +#define EVEN_PARITY 0x1 +#define ODD_PARITY 0x2 +#define SPACE_PARITY 0x3 + +#define UARTDM_IPR_STALE_TIMEOUT_MSB_BMSK 0xffffff80 +#define UARTDM_IPR_STALE_LSB_BMSK 0x1f + +/* These can be used for both ISR and IMR register */ +#define UARTDM_ISR_TX_READY_BMSK BIT(7) +#define UARTDM_ISR_CURRENT_CTS_BMSK BIT(6) +#define UARTDM_ISR_DELTA_CTS_BMSK BIT(5) +#define UARTDM_ISR_RXLEV_BMSK BIT(4) +#define UARTDM_ISR_RXSTALE_BMSK BIT(3) +#define UARTDM_ISR_RXBREAK_BMSK BIT(2) +#define UARTDM_ISR_RXHUNT_BMSK BIT(1) +#define UARTDM_ISR_TXLEV_BMSK BIT(0) + +/* Field definitions for UART_DM_DMEN*/ +#define UARTDM_TX_DM_EN_BMSK 0x1 +#define UARTDM_RX_DM_EN_BMSK 0x2 + +#define UART_FIFOSIZE 64 +#define UARTCLK 7372800 + +/* Rx DMA request states */ +enum flush_reason { + FLUSH_NONE, + FLUSH_DATA_READY, + FLUSH_DATA_INVALID, /* values after this indicate invalid data */ + FLUSH_IGNORE = FLUSH_DATA_INVALID, + FLUSH_STOP, + FLUSH_SHUTDOWN, +}; + +/* UART clock states */ +enum msm_hs_clk_states_e { + MSM_HS_CLK_PORT_OFF, /* port not in use */ + MSM_HS_CLK_OFF, /* clock disabled */ + MSM_HS_CLK_REQUEST_OFF, /* disable after TX and RX flushed */ + MSM_HS_CLK_ON, /* clock enabled */ +}; + +/* Track the forced RXSTALE flush during clock off sequence. + * These states are only valid during MSM_HS_CLK_REQUEST_OFF */ +enum msm_hs_clk_req_off_state_e { + CLK_REQ_OFF_START, + CLK_REQ_OFF_RXSTALE_ISSUED, + CLK_REQ_OFF_FLUSH_ISSUED, + CLK_REQ_OFF_RXSTALE_FLUSHED, +}; + +/** + * struct msm_hs_tx + * @tx_ready_int_en: ok to dma more tx? + * @dma_in_flight: tx dma in progress + * @xfer: top level DMA command pointer structure + * @command_ptr: third level command struct pointer + * @command_ptr_ptr: second level command list struct pointer + * @mapped_cmd_ptr: DMA view of third level command struct + * @mapped_cmd_ptr_ptr: DMA view of second level command list struct + * @tx_count: number of bytes to transfer in DMA transfer + * @dma_base: DMA view of UART xmit buffer + * + * This structure describes a single Tx DMA transaction. MSM DMA + * commands have two levels of indirection. The top level command + * ptr points to a list of command ptr which in turn points to a + * single DMA 'command'. In our case each Tx transaction consists + * of a single second level pointer pointing to a 'box type' command. + */ +struct msm_hs_tx { + unsigned int tx_ready_int_en; + unsigned int dma_in_flight; + struct msm_dmov_cmd xfer; + dmov_box *command_ptr; + u32 *command_ptr_ptr; + dma_addr_t mapped_cmd_ptr; + dma_addr_t mapped_cmd_ptr_ptr; + int tx_count; + dma_addr_t dma_base; +}; + +/** + * struct msm_hs_rx + * @flush: Rx DMA request state + * @xfer: top level DMA command pointer structure + * @cmdptr_dmaaddr: DMA view of second level command structure + * @command_ptr: third level DMA command pointer structure + * @command_ptr_ptr: second level DMA command list pointer + * @mapped_cmd_ptr: DMA view of the third level command structure + * @wait: wait for DMA completion before shutdown + * @buffer: destination buffer for RX DMA + * @rbuffer: DMA view of buffer + * @pool: dma pool out of which coherent rx buffer is allocated + * @tty_work: private work-queue for tty flip buffer push task + * + * This structure describes a single Rx DMA transaction. Rx DMA + * transactions use box mode DMA commands. + */ +struct msm_hs_rx { + enum flush_reason flush; + struct msm_dmov_cmd xfer; + dma_addr_t cmdptr_dmaaddr; + dmov_box *command_ptr; + u32 *command_ptr_ptr; + dma_addr_t mapped_cmd_ptr; + wait_queue_head_t wait; + dma_addr_t rbuffer; + unsigned char *buffer; + struct dma_pool *pool; + struct work_struct tty_work; +}; + +/** + * struct msm_hs_rx_wakeup + * @irq: IRQ line to be configured as interrupt source on Rx activity + * @ignore: boolean value. 1 = ignore the wakeup interrupt + * @rx_to_inject: extra character to be inserted to Rx tty on wakeup + * @inject_rx: 1 = insert rx_to_inject. 0 = do not insert extra character + * + * This is an optional structure required for UART Rx GPIO IRQ based + * wakeup from low power state. UART wakeup can be triggered by RX activity + * (using a wakeup GPIO on the UART RX pin). This should only be used if + * there is not a wakeup GPIO on the UART CTS, and the first RX byte is + * known (eg., with the Bluetooth Texas Instruments HCILL protocol), + * since the first RX byte will always be lost. RTS will be asserted even + * while the UART is clocked off in this mode of operation. + */ +struct msm_hs_rx_wakeup { + int irq; /* < 0 indicates low power wakeup disabled */ + unsigned char ignore; + unsigned char inject_rx; + char rx_to_inject; +}; + +/** + * struct msm_hs_port + * @uport: embedded uart port structure + * @imr_reg: shadow value of UARTDM_IMR + * @clk: uart input clock handle + * @tx: Tx transaction related data structure + * @rx: Rx transaction related data structure + * @dma_tx_channel: Tx DMA command channel + * @dma_rx_channel Rx DMA command channel + * @dma_tx_crci: Tx channel rate control interface number + * @dma_rx_crci: Rx channel rate control interface number + * @clk_off_timer: Timer to poll DMA event completion before clock off + * @clk_off_delay: clk_off_timer poll interval + * @clk_state: overall clock state + * @clk_req_off_state: post flush clock states + * @rx_wakeup: optional rx_wakeup feature related data + * @exit_lpm_cb: optional callback to exit low power mode + * + * Low level serial port structure. + */ +struct msm_hs_port { + struct uart_port uport; + unsigned long imr_reg; + struct clk *clk; + struct msm_hs_tx tx; + struct msm_hs_rx rx; + + int dma_tx_channel; + int dma_rx_channel; + int dma_tx_crci; + int dma_rx_crci; + + struct hrtimer clk_off_timer; + ktime_t clk_off_delay; + enum msm_hs_clk_states_e clk_state; + enum msm_hs_clk_req_off_state_e clk_req_off_state; + + struct msm_hs_rx_wakeup rx_wakeup; + void (*exit_lpm_cb)(struct uart_port *); +}; + +#define MSM_UARTDM_BURST_SIZE 16 /* DM burst size (in bytes) */ +#define UARTDM_TX_BUF_SIZE UART_XMIT_SIZE +#define UARTDM_RX_BUF_SIZE 512 + +#define UARTDM_NR 2 + +static struct msm_hs_port q_uart_port[UARTDM_NR]; +static struct platform_driver msm_serial_hs_platform_driver; +static struct uart_driver msm_hs_driver; +static struct uart_ops msm_hs_ops; +static struct workqueue_struct *msm_hs_workqueue; + +#define UARTDM_TO_MSM(uart_port) \ + container_of((uart_port), struct msm_hs_port, uport) + +static unsigned int use_low_power_rx_wakeup(struct msm_hs_port + *msm_uport) +{ + return (msm_uport->rx_wakeup.irq >= 0); +} + +static unsigned int msm_hs_read(struct uart_port *uport, + unsigned int offset) +{ + return ioread32(uport->membase + offset); +} + +static void msm_hs_write(struct uart_port *uport, unsigned int offset, + unsigned int value) +{ + iowrite32(value, uport->membase + offset); +} + +static void msm_hs_release_port(struct uart_port *port) +{ + iounmap(port->membase); +} + +static int msm_hs_request_port(struct uart_port *port) +{ + port->membase = ioremap(port->mapbase, PAGE_SIZE); + if (unlikely(!port->membase)) + return -ENOMEM; + + /* configure the CR Protection to Enable */ + msm_hs_write(port, UARTDM_CR_ADDR, CR_PROTECTION_EN); + return 0; +} + +static int __devexit msm_hs_remove(struct platform_device *pdev) +{ + + struct msm_hs_port *msm_uport; + struct device *dev; + + if (pdev->id < 0 || pdev->id >= UARTDM_NR) { + printk(KERN_ERR "Invalid plaform device ID = %d\n", pdev->id); + return -EINVAL; + } + + msm_uport = &q_uart_port[pdev->id]; + dev = msm_uport->uport.dev; + + dma_unmap_single(dev, msm_uport->rx.mapped_cmd_ptr, sizeof(dmov_box), + DMA_TO_DEVICE); + dma_pool_free(msm_uport->rx.pool, msm_uport->rx.buffer, + msm_uport->rx.rbuffer); + dma_pool_destroy(msm_uport->rx.pool); + + dma_unmap_single(dev, msm_uport->rx.cmdptr_dmaaddr, sizeof(u32 *), + DMA_TO_DEVICE); + dma_unmap_single(dev, msm_uport->tx.mapped_cmd_ptr_ptr, sizeof(u32 *), + DMA_TO_DEVICE); + dma_unmap_single(dev, msm_uport->tx.mapped_cmd_ptr, sizeof(dmov_box), + DMA_TO_DEVICE); + + uart_remove_one_port(&msm_hs_driver, &msm_uport->uport); + clk_put(msm_uport->clk); + + /* Free the tx resources */ + kfree(msm_uport->tx.command_ptr); + kfree(msm_uport->tx.command_ptr_ptr); + + /* Free the rx resources */ + kfree(msm_uport->rx.command_ptr); + kfree(msm_uport->rx.command_ptr_ptr); + + iounmap(msm_uport->uport.membase); + + return 0; +} + +static int msm_hs_init_clk_locked(struct uart_port *uport) +{ + int ret; + struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport); + + ret = clk_enable(msm_uport->clk); + if (ret) { + printk(KERN_ERR "Error could not turn on UART clk\n"); + return ret; + } + + /* Set up the MREG/NREG/DREG/MNDREG */ + ret = clk_set_rate(msm_uport->clk, uport->uartclk); + if (ret) { + printk(KERN_WARNING "Error setting clock rate on UART\n"); + clk_disable(msm_uport->clk); + return ret; + } + + msm_uport->clk_state = MSM_HS_CLK_ON; + return 0; +} + +/* Enable and Disable clocks (Used for power management) */ +static void msm_hs_pm(struct uart_port *uport, unsigned int state, + unsigned int oldstate) +{ + struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport); + + if (use_low_power_rx_wakeup(msm_uport) || + msm_uport->exit_lpm_cb) + return; /* ignore linux PM states, + use msm_hs_request_clock API */ + + switch (state) { + case 0: + clk_enable(msm_uport->clk); + break; + case 3: + clk_disable(msm_uport->clk); + break; + default: + dev_err(uport->dev, "msm_serial: Unknown PM state %d\n", + state); + } +} + +/* + * programs the UARTDM_CSR register with correct bit rates + * + * Interrupts should be disabled before we are called, as + * we modify Set Baud rate + * Set receive stale interrupt level, dependant on Bit Rate + * Goal is to have around 8 ms before indicate stale. + * roundup (((Bit Rate * .008) / 10) + 1 + */ +static void msm_hs_set_bps_locked(struct uart_port *uport, + unsigned int bps) +{ + unsigned long rxstale; + unsigned long data; + struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport); + + switch (bps) { + case 300: + msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_75); + rxstale = 1; + break; + case 600: + msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_150); + rxstale = 1; + break; + case 1200: + msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_300); + rxstale = 1; + break; + case 2400: + msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_600); + rxstale = 1; + break; + case 4800: + msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_1200); + rxstale = 1; + break; + case 9600: + msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_2400); + rxstale = 2; + break; + case 14400: + msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_3600); + rxstale = 3; + break; + case 19200: + msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_4800); + rxstale = 4; + break; + case 28800: + msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_7200); + rxstale = 6; + break; + case 38400: + msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_9600); + rxstale = 8; + break; + case 57600: + msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_14400); + rxstale = 16; + break; + case 76800: + msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_19200); + rxstale = 16; + break; + case 115200: + msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_28800); + rxstale = 31; + break; + case 230400: + msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_57600); + rxstale = 31; + break; + case 460800: + msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_115200); + rxstale = 31; + break; + case 4000000: + case 3686400: + case 3200000: + case 3500000: + case 3000000: + case 2500000: + case 1500000: + case 1152000: + case 1000000: + case 921600: + msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_115200); + rxstale = 31; + break; + default: + msm_hs_write(uport, UARTDM_CSR_ADDR, UARTDM_CSR_2400); + /* default to 9600 */ + bps = 9600; + rxstale = 2; + break; + } + if (bps > 460800) + uport->uartclk = bps * 16; + else + uport->uartclk = UARTCLK; + + if (clk_set_rate(msm_uport->clk, uport->uartclk)) { + printk(KERN_WARNING "Error setting clock rate on UART\n"); + return; + } + + data = rxstale & UARTDM_IPR_STALE_LSB_BMSK; + data |= UARTDM_IPR_STALE_TIMEOUT_MSB_BMSK & (rxstale << 2); + + msm_hs_write(uport, UARTDM_IPR_ADDR, data); +} + +/* + * termios : new ktermios + * oldtermios: old ktermios previous setting + * + * Configure the serial port + */ +static void msm_hs_set_termios(struct uart_port *uport, + struct ktermios *termios, + struct ktermios *oldtermios) +{ + unsigned int bps; + unsigned long data; + unsigned long flags; + unsigned int c_cflag = termios->c_cflag; + struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport); + + spin_lock_irqsave(&uport->lock, flags); + clk_enable(msm_uport->clk); + + /* 300 is the minimum baud support by the driver */ + bps = uart_get_baud_rate(uport, termios, oldtermios, 200, 4000000); + + /* Temporary remapping 200 BAUD to 3.2 mbps */ + if (bps == 200) + bps = 3200000; + + msm_hs_set_bps_locked(uport, bps); + + data = msm_hs_read(uport, UARTDM_MR2_ADDR); + data &= ~UARTDM_MR2_PARITY_MODE_BMSK; + /* set parity */ + if (PARENB == (c_cflag & PARENB)) { + if (PARODD == (c_cflag & PARODD)) + data |= ODD_PARITY; + else if (CMSPAR == (c_cflag & CMSPAR)) + data |= SPACE_PARITY; + else + data |= EVEN_PARITY; + } + + /* Set bits per char */ + data &= ~UARTDM_MR2_BITS_PER_CHAR_BMSK; + + switch (c_cflag & CSIZE) { + case CS5: + data |= FIVE_BPC; + break; + case CS6: + data |= SIX_BPC; + break; + case CS7: + data |= SEVEN_BPC; + break; + default: + data |= EIGHT_BPC; + break; + } + /* stop bits */ + if (c_cflag & CSTOPB) { + data |= STOP_BIT_TWO; + } else { + /* otherwise 1 stop bit */ + data |= STOP_BIT_ONE; + } + data |= UARTDM_MR2_ERROR_MODE_BMSK; + /* write parity/bits per char/stop bit configuration */ + msm_hs_write(uport, UARTDM_MR2_ADDR, data); + + /* Configure HW flow control */ + data = msm_hs_read(uport, UARTDM_MR1_ADDR); + + data &= ~(UARTDM_MR1_CTS_CTL_BMSK | UARTDM_MR1_RX_RDY_CTL_BMSK); + + if (c_cflag & CRTSCTS) { + data |= UARTDM_MR1_CTS_CTL_BMSK; + data |= UARTDM_MR1_RX_RDY_CTL_BMSK; + } + + msm_hs_write(uport, UARTDM_MR1_ADDR, data); + + uport->ignore_status_mask = termios->c_iflag & INPCK; + uport->ignore_status_mask |= termios->c_iflag & IGNPAR; + uport->read_status_mask = (termios->c_cflag & CREAD); + + msm_hs_write(uport, UARTDM_IMR_ADDR, 0); + + /* Set Transmit software time out */ + uart_update_timeout(uport, c_cflag, bps); + + msm_hs_write(uport, UARTDM_CR_ADDR, RESET_RX); + msm_hs_write(uport, UARTDM_CR_ADDR, RESET_TX); + + if (msm_uport->rx.flush == FLUSH_NONE) { + msm_uport->rx.flush = FLUSH_IGNORE; + msm_dmov_stop_cmd(msm_uport->dma_rx_channel, NULL, 1); + } + + msm_hs_write(uport, UARTDM_IMR_ADDR, msm_uport->imr_reg); + + clk_disable(msm_uport->clk); + spin_unlock_irqrestore(&uport->lock, flags); +} + +/* + * Standard API, Transmitter + * Any character in the transmit shift register is sent + */ +static unsigned int msm_hs_tx_empty(struct uart_port *uport) +{ + unsigned int data; + unsigned int ret = 0; + struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport); + + clk_enable(msm_uport->clk); + + data = msm_hs_read(uport, UARTDM_SR_ADDR); + if (data & UARTDM_SR_TXEMT_BMSK) + ret = TIOCSER_TEMT; + + clk_disable(msm_uport->clk); + + return ret; +} + +/* + * Standard API, Stop transmitter. + * Any character in the transmit shift register is sent as + * well as the current data mover transfer . + */ +static void msm_hs_stop_tx_locked(struct uart_port *uport) +{ + struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport); + + msm_uport->tx.tx_ready_int_en = 0; +} + +/* + * Standard API, Stop receiver as soon as possible. + * + * Function immediately terminates the operation of the + * channel receiver and any incoming characters are lost. None + * of the receiver status bits are affected by this command and + * characters that are already in the receive FIFO there. + */ +static void msm_hs_stop_rx_locked(struct uart_port *uport) +{ + struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport); + unsigned int data; + + clk_enable(msm_uport->clk); + + /* disable dlink */ + data = msm_hs_read(uport, UARTDM_DMEN_ADDR); + data &= ~UARTDM_RX_DM_EN_BMSK; + msm_hs_write(uport, UARTDM_DMEN_ADDR, data); + + /* Disable the receiver */ + if (msm_uport->rx.flush == FLUSH_NONE) + msm_dmov_stop_cmd(msm_uport->dma_rx_channel, NULL, 1); + + if (msm_uport->rx.flush != FLUSH_SHUTDOWN) + msm_uport->rx.flush = FLUSH_STOP; + + clk_disable(msm_uport->clk); +} + +/* Transmit the next chunk of data */ +static void msm_hs_submit_tx_locked(struct uart_port *uport) +{ + int left; + int tx_count; + dma_addr_t src_addr; + struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport); + struct msm_hs_tx *tx = &msm_uport->tx; + struct circ_buf *tx_buf = &msm_uport->uport.state->xmit; + + if (uart_circ_empty(tx_buf) || uport->state->port.tty->stopped) { + msm_hs_stop_tx_locked(uport); + return; + } + + tx->dma_in_flight = 1; + + tx_count = uart_circ_chars_pending(tx_buf); + + if (UARTDM_TX_BUF_SIZE < tx_count) + tx_count = UARTDM_TX_BUF_SIZE; + + left = UART_XMIT_SIZE - tx_buf->tail; + + if (tx_count > left) + tx_count = left; + + src_addr = tx->dma_base + tx_buf->tail; + dma_sync_single_for_device(uport->dev, src_addr, tx_count, + DMA_TO_DEVICE); + + tx->command_ptr->num_rows = (((tx_count + 15) >> 4) << 16) | + ((tx_count + 15) >> 4); + tx->command_ptr->src_row_addr = src_addr; + + dma_sync_single_for_device(uport->dev, tx->mapped_cmd_ptr, + sizeof(dmov_box), DMA_TO_DEVICE); + + *tx->command_ptr_ptr = CMD_PTR_LP | DMOV_CMD_ADDR(tx->mapped_cmd_ptr); + + dma_sync_single_for_device(uport->dev, tx->mapped_cmd_ptr_ptr, + sizeof(u32 *), DMA_TO_DEVICE); + + /* Save tx_count to use in Callback */ + tx->tx_count = tx_count; + msm_hs_write(uport, UARTDM_NCF_TX_ADDR, tx_count); + + /* Disable the tx_ready interrupt */ + msm_uport->imr_reg &= ~UARTDM_ISR_TX_READY_BMSK; + msm_hs_write(uport, UARTDM_IMR_ADDR, msm_uport->imr_reg); + msm_dmov_enqueue_cmd(msm_uport->dma_tx_channel, &tx->xfer); +} + +/* Start to receive the next chunk of data */ +static void msm_hs_start_rx_locked(struct uart_port *uport) +{ + struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport); + + msm_hs_write(uport, UARTDM_CR_ADDR, RESET_STALE_INT); + msm_hs_write(uport, UARTDM_DMRX_ADDR, UARTDM_RX_BUF_SIZE); + msm_hs_write(uport, UARTDM_CR_ADDR, STALE_EVENT_ENABLE); + msm_uport->imr_reg |= UARTDM_ISR_RXLEV_BMSK; + msm_hs_write(uport, UARTDM_IMR_ADDR, msm_uport->imr_reg); + + msm_uport->rx.flush = FLUSH_NONE; + msm_dmov_enqueue_cmd(msm_uport->dma_rx_channel, &msm_uport->rx.xfer); + + /* might have finished RX and be ready to clock off */ + hrtimer_start(&msm_uport->clk_off_timer, msm_uport->clk_off_delay, + HRTIMER_MODE_REL); +} + +/* Enable the transmitter Interrupt */ +static void msm_hs_start_tx_locked(struct uart_port *uport) +{ + struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport); + + clk_enable(msm_uport->clk); + + if (msm_uport->exit_lpm_cb) + msm_uport->exit_lpm_cb(uport); + + if (msm_uport->tx.tx_ready_int_en == 0) { + msm_uport->tx.tx_ready_int_en = 1; + msm_hs_submit_tx_locked(uport); + } + + clk_disable(msm_uport->clk); +} + +/* + * This routine is called when we are done with a DMA transfer + * + * This routine is registered with Data mover when we set + * up a Data Mover transfer. It is called from Data mover ISR + * when the DMA transfer is done. + */ +static void msm_hs_dmov_tx_callback(struct msm_dmov_cmd *cmd_ptr, + unsigned int result, + struct msm_dmov_errdata *err) +{ + unsigned long flags; + struct msm_hs_port *msm_uport; + + /* DMA did not finish properly */ + WARN_ON((((result & RSLT_FIFO_CNTR_BMSK) >> 28) == 1) && + !(result & RSLT_VLD)); + + msm_uport = container_of(cmd_ptr, struct msm_hs_port, tx.xfer); + + spin_lock_irqsave(&msm_uport->uport.lock, flags); + clk_enable(msm_uport->clk); + + msm_uport->imr_reg |= UARTDM_ISR_TX_READY_BMSK; + msm_hs_write(&msm_uport->uport, UARTDM_IMR_ADDR, msm_uport->imr_reg); + + clk_disable(msm_uport->clk); + spin_unlock_irqrestore(&msm_uport->uport.lock, flags); +} + +/* + * This routine is called when we are done with a DMA transfer or the + * a flush has been sent to the data mover driver. + * + * This routine is registered with Data mover when we set up a Data Mover + * transfer. It is called from Data mover ISR when the DMA transfer is done. + */ +static void msm_hs_dmov_rx_callback(struct msm_dmov_cmd *cmd_ptr, + unsigned int result, + struct msm_dmov_errdata *err) +{ + int retval; + int rx_count; + unsigned long status; + unsigned int error_f = 0; + unsigned long flags; + unsigned int flush; + struct tty_struct *tty; + struct uart_port *uport; + struct msm_hs_port *msm_uport; + + msm_uport = container_of(cmd_ptr, struct msm_hs_port, rx.xfer); + uport = &msm_uport->uport; + + spin_lock_irqsave(&uport->lock, flags); + clk_enable(msm_uport->clk); + + tty = uport->state->port.tty; + + msm_hs_write(uport, UARTDM_CR_ADDR, STALE_EVENT_DISABLE); + + status = msm_hs_read(uport, UARTDM_SR_ADDR); + + /* overflow is not connect to data in a FIFO */ + if (unlikely((status & UARTDM_SR_OVERRUN_BMSK) && + (uport->read_status_mask & CREAD))) { + tty_insert_flip_char(tty, 0, TTY_OVERRUN); + uport->icount.buf_overrun++; + error_f = 1; + } + + if (!(uport->ignore_status_mask & INPCK)) + status = status & ~(UARTDM_SR_PAR_FRAME_BMSK); + + if (unlikely(status & UARTDM_SR_PAR_FRAME_BMSK)) { + /* Can not tell difference between parity & frame error */ + uport->icount.parity++; + error_f = 1; + if (uport->ignore_status_mask & IGNPAR) + tty_insert_flip_char(tty, 0, TTY_PARITY); + } + + if (error_f) + msm_hs_write(uport, UARTDM_CR_ADDR, RESET_ERROR_STATUS); + + if (msm_uport->clk_req_off_state == CLK_REQ_OFF_FLUSH_ISSUED) + msm_uport->clk_req_off_state = CLK_REQ_OFF_RXSTALE_FLUSHED; + + flush = msm_uport->rx.flush; + if (flush == FLUSH_IGNORE) + msm_hs_start_rx_locked(uport); + if (flush == FLUSH_STOP) + msm_uport->rx.flush = FLUSH_SHUTDOWN; + if (flush >= FLUSH_DATA_INVALID) + goto out; + + rx_count = msm_hs_read(uport, UARTDM_RX_TOTAL_SNAP_ADDR); + + if (0 != (uport->read_status_mask & CREAD)) { + retval = tty_insert_flip_string(tty, msm_uport->rx.buffer, + rx_count); + BUG_ON(retval != rx_count); + } + + msm_hs_start_rx_locked(uport); + +out: + clk_disable(msm_uport->clk); + + spin_unlock_irqrestore(&uport->lock, flags); + + if (flush < FLUSH_DATA_INVALID) + queue_work(msm_hs_workqueue, &msm_uport->rx.tty_work); +} + +static void msm_hs_tty_flip_buffer_work(struct work_struct *work) +{ + struct msm_hs_port *msm_uport = + container_of(work, struct msm_hs_port, rx.tty_work); + struct tty_struct *tty = msm_uport->uport.state->port.tty; + + tty_flip_buffer_push(tty); +} + +/* + * Standard API, Current states of modem control inputs + * + * Since CTS can be handled entirely by HARDWARE we always + * indicate clear to send and count on the TX FIFO to block when + * it fills up. + * + * - TIOCM_DCD + * - TIOCM_CTS + * - TIOCM_DSR + * - TIOCM_RI + * (Unsupported) DCD and DSR will return them high. RI will return low. + */ +static unsigned int msm_hs_get_mctrl_locked(struct uart_port *uport) +{ + return TIOCM_DSR | TIOCM_CAR | TIOCM_CTS; +} + +/* + * True enables UART auto RFR, which indicates we are ready for data if the RX + * buffer is not full. False disables auto RFR, and deasserts RFR to indicate + * we are not ready for data. Must be called with UART clock on. + */ +static void set_rfr_locked(struct uart_port *uport, int auto_rfr) +{ + unsigned int data; + + data = msm_hs_read(uport, UARTDM_MR1_ADDR); + + if (auto_rfr) { + /* enable auto ready-for-receiving */ + data |= UARTDM_MR1_RX_RDY_CTL_BMSK; + msm_hs_write(uport, UARTDM_MR1_ADDR, data); + } else { + /* disable auto ready-for-receiving */ + data &= ~UARTDM_MR1_RX_RDY_CTL_BMSK; + msm_hs_write(uport, UARTDM_MR1_ADDR, data); + /* RFR is active low, set high */ + msm_hs_write(uport, UARTDM_CR_ADDR, RFR_HIGH); + } +} + +/* + * Standard API, used to set or clear RFR + */ +static void msm_hs_set_mctrl_locked(struct uart_port *uport, + unsigned int mctrl) +{ + unsigned int auto_rfr; + struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport); + + clk_enable(msm_uport->clk); + + auto_rfr = TIOCM_RTS & mctrl ? 1 : 0; + set_rfr_locked(uport, auto_rfr); + + clk_disable(msm_uport->clk); +} + +/* Standard API, Enable modem status (CTS) interrupt */ +static void msm_hs_enable_ms_locked(struct uart_port *uport) +{ + struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport); + + clk_enable(msm_uport->clk); + + /* Enable DELTA_CTS Interrupt */ + msm_uport->imr_reg |= UARTDM_ISR_DELTA_CTS_BMSK; + msm_hs_write(uport, UARTDM_IMR_ADDR, msm_uport->imr_reg); + + clk_disable(msm_uport->clk); + +} + +/* + * Standard API, Break Signal + * + * Control the transmission of a break signal. ctl eq 0 => break + * signal terminate ctl ne 0 => start break signal + */ +static void msm_hs_break_ctl(struct uart_port *uport, int ctl) +{ + struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport); + + clk_enable(msm_uport->clk); + msm_hs_write(uport, UARTDM_CR_ADDR, ctl ? START_BREAK : STOP_BREAK); + clk_disable(msm_uport->clk); +} + +static void msm_hs_config_port(struct uart_port *uport, int cfg_flags) +{ + unsigned long flags; + + spin_lock_irqsave(&uport->lock, flags); + if (cfg_flags & UART_CONFIG_TYPE) { + uport->type = PORT_MSM; + msm_hs_request_port(uport); + } + spin_unlock_irqrestore(&uport->lock, flags); +} + +/* Handle CTS changes (Called from interrupt handler) */ +static void msm_hs_handle_delta_cts(struct uart_port *uport) +{ + unsigned long flags; + struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport); + + spin_lock_irqsave(&uport->lock, flags); + clk_enable(msm_uport->clk); + + /* clear interrupt */ + msm_hs_write(uport, UARTDM_CR_ADDR, RESET_CTS); + uport->icount.cts++; + + clk_disable(msm_uport->clk); + spin_unlock_irqrestore(&uport->lock, flags); + + /* clear the IOCTL TIOCMIWAIT if called */ + wake_up_interruptible(&uport->state->port.delta_msr_wait); +} + +/* check if the TX path is flushed, and if so clock off + * returns 0 did not clock off, need to retry (still sending final byte) + * -1 did not clock off, do not retry + * 1 if we clocked off + */ +static int msm_hs_check_clock_off_locked(struct uart_port *uport) +{ + unsigned long sr_status; + struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport); + struct circ_buf *tx_buf = &uport->state->xmit; + + /* Cancel if tx tty buffer is not empty, dma is in flight, + * or tx fifo is not empty, or rx fifo is not empty */ + if (msm_uport->clk_state != MSM_HS_CLK_REQUEST_OFF || + !uart_circ_empty(tx_buf) || msm_uport->tx.dma_in_flight || + (msm_uport->imr_reg & UARTDM_ISR_TXLEV_BMSK) || + !(msm_uport->imr_reg & UARTDM_ISR_RXLEV_BMSK)) { + return -1; + } + + /* Make sure the uart is finished with the last byte */ + sr_status = msm_hs_read(uport, UARTDM_SR_ADDR); + if (!(sr_status & UARTDM_SR_TXEMT_BMSK)) + return 0; /* retry */ + + /* Make sure forced RXSTALE flush complete */ + switch (msm_uport->clk_req_off_state) { + case CLK_REQ_OFF_START: + msm_uport->clk_req_off_state = CLK_REQ_OFF_RXSTALE_ISSUED; + msm_hs_write(uport, UARTDM_CR_ADDR, FORCE_STALE_EVENT); + return 0; /* RXSTALE flush not complete - retry */ + case CLK_REQ_OFF_RXSTALE_ISSUED: + case CLK_REQ_OFF_FLUSH_ISSUED: + return 0; /* RXSTALE flush not complete - retry */ + case CLK_REQ_OFF_RXSTALE_FLUSHED: + break; /* continue */ + } + + if (msm_uport->rx.flush != FLUSH_SHUTDOWN) { + if (msm_uport->rx.flush == FLUSH_NONE) + msm_hs_stop_rx_locked(uport); + return 0; /* come back later to really clock off */ + } + + /* we really want to clock off */ + clk_disable(msm_uport->clk); + msm_uport->clk_state = MSM_HS_CLK_OFF; + + if (use_low_power_rx_wakeup(msm_uport)) { + msm_uport->rx_wakeup.ignore = 1; + enable_irq(msm_uport->rx_wakeup.irq); + } + return 1; +} + +static enum hrtimer_restart msm_hs_clk_off_retry(struct hrtimer *timer) +{ + unsigned long flags; + int ret = HRTIMER_NORESTART; + struct msm_hs_port *msm_uport = container_of(timer, struct msm_hs_port, + clk_off_timer); + struct uart_port *uport = &msm_uport->uport; + + spin_lock_irqsave(&uport->lock, flags); + + if (!msm_hs_check_clock_off_locked(uport)) { + hrtimer_forward_now(timer, msm_uport->clk_off_delay); + ret = HRTIMER_RESTART; + } + + spin_unlock_irqrestore(&uport->lock, flags); + + return ret; +} + +static irqreturn_t msm_hs_isr(int irq, void *dev) +{ + unsigned long flags; + unsigned long isr_status; + struct msm_hs_port *msm_uport = dev; + struct uart_port *uport = &msm_uport->uport; + struct circ_buf *tx_buf = &uport->state->xmit; + struct msm_hs_tx *tx = &msm_uport->tx; + struct msm_hs_rx *rx = &msm_uport->rx; + + spin_lock_irqsave(&uport->lock, flags); + + isr_status = msm_hs_read(uport, UARTDM_MISR_ADDR); + + /* Uart RX starting */ + if (isr_status & UARTDM_ISR_RXLEV_BMSK) { + msm_uport->imr_reg &= ~UARTDM_ISR_RXLEV_BMSK; + msm_hs_write(uport, UARTDM_IMR_ADDR, msm_uport->imr_reg); + } + /* Stale rx interrupt */ + if (isr_status & UARTDM_ISR_RXSTALE_BMSK) { + msm_hs_write(uport, UARTDM_CR_ADDR, STALE_EVENT_DISABLE); + msm_hs_write(uport, UARTDM_CR_ADDR, RESET_STALE_INT); + + if (msm_uport->clk_req_off_state == CLK_REQ_OFF_RXSTALE_ISSUED) + msm_uport->clk_req_off_state = + CLK_REQ_OFF_FLUSH_ISSUED; + if (rx->flush == FLUSH_NONE) { + rx->flush = FLUSH_DATA_READY; + msm_dmov_stop_cmd(msm_uport->dma_rx_channel, NULL, 1); + } + } + /* tx ready interrupt */ + if (isr_status & UARTDM_ISR_TX_READY_BMSK) { + /* Clear TX Ready */ + msm_hs_write(uport, UARTDM_CR_ADDR, CLEAR_TX_READY); + + if (msm_uport->clk_state == MSM_HS_CLK_REQUEST_OFF) { + msm_uport->imr_reg |= UARTDM_ISR_TXLEV_BMSK; + msm_hs_write(uport, UARTDM_IMR_ADDR, + msm_uport->imr_reg); + } + + /* Complete DMA TX transactions and submit new transactions */ + tx_buf->tail = (tx_buf->tail + tx->tx_count) & ~UART_XMIT_SIZE; + + tx->dma_in_flight = 0; + + uport->icount.tx += tx->tx_count; + if (tx->tx_ready_int_en) + msm_hs_submit_tx_locked(uport); + + if (uart_circ_chars_pending(tx_buf) < WAKEUP_CHARS) + uart_write_wakeup(uport); + } + if (isr_status & UARTDM_ISR_TXLEV_BMSK) { + /* TX FIFO is empty */ + msm_uport->imr_reg &= ~UARTDM_ISR_TXLEV_BMSK; + msm_hs_write(uport, UARTDM_IMR_ADDR, msm_uport->imr_reg); + if (!msm_hs_check_clock_off_locked(uport)) + hrtimer_start(&msm_uport->clk_off_timer, + msm_uport->clk_off_delay, + HRTIMER_MODE_REL); + } + + /* Change in CTS interrupt */ + if (isr_status & UARTDM_ISR_DELTA_CTS_BMSK) + msm_hs_handle_delta_cts(uport); + + spin_unlock_irqrestore(&uport->lock, flags); + + return IRQ_HANDLED; +} + +void msm_hs_request_clock_off_locked(struct uart_port *uport) +{ + struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport); + + if (msm_uport->clk_state == MSM_HS_CLK_ON) { + msm_uport->clk_state = MSM_HS_CLK_REQUEST_OFF; + msm_uport->clk_req_off_state = CLK_REQ_OFF_START; + if (!use_low_power_rx_wakeup(msm_uport)) + set_rfr_locked(uport, 0); + msm_uport->imr_reg |= UARTDM_ISR_TXLEV_BMSK; + msm_hs_write(uport, UARTDM_IMR_ADDR, msm_uport->imr_reg); + } +} + +/** + * msm_hs_request_clock_off - request to (i.e. asynchronously) turn off uart + * clock once pending TX is flushed and Rx DMA command is terminated. + * @uport: uart_port structure for the device instance. + * + * This functions puts the device into a partially active low power mode. It + * waits to complete all pending tx transactions, flushes ongoing Rx DMA + * command and terminates UART side Rx transaction, puts UART HW in non DMA + * mode and then clocks off the device. A client calls this when no UART + * data is expected. msm_request_clock_on() must be called before any further + * UART can be sent or received. + */ +void msm_hs_request_clock_off(struct uart_port *uport) +{ + unsigned long flags; + + spin_lock_irqsave(&uport->lock, flags); + msm_hs_request_clock_off_locked(uport); + spin_unlock_irqrestore(&uport->lock, flags); +} + +void msm_hs_request_clock_on_locked(struct uart_port *uport) +{ + struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport); + unsigned int data; + + switch (msm_uport->clk_state) { + case MSM_HS_CLK_OFF: + clk_enable(msm_uport->clk); + disable_irq_nosync(msm_uport->rx_wakeup.irq); + /* fall-through */ + case MSM_HS_CLK_REQUEST_OFF: + if (msm_uport->rx.flush == FLUSH_STOP || + msm_uport->rx.flush == FLUSH_SHUTDOWN) { + msm_hs_write(uport, UARTDM_CR_ADDR, RESET_RX); + data = msm_hs_read(uport, UARTDM_DMEN_ADDR); + data |= UARTDM_RX_DM_EN_BMSK; + msm_hs_write(uport, UARTDM_DMEN_ADDR, data); + } + hrtimer_try_to_cancel(&msm_uport->clk_off_timer); + if (msm_uport->rx.flush == FLUSH_SHUTDOWN) + msm_hs_start_rx_locked(uport); + if (!use_low_power_rx_wakeup(msm_uport)) + set_rfr_locked(uport, 1); + if (msm_uport->rx.flush == FLUSH_STOP) + msm_uport->rx.flush = FLUSH_IGNORE; + msm_uport->clk_state = MSM_HS_CLK_ON; + break; + case MSM_HS_CLK_ON: + break; + case MSM_HS_CLK_PORT_OFF: + break; + } +} + +/** + * msm_hs_request_clock_on - Switch the device from partially active low + * power mode to fully active (i.e. clock on) mode. + * @uport: uart_port structure for the device. + * + * This function switches on the input clock, puts UART HW into DMA mode + * and enqueues an Rx DMA command if the device was in partially active + * mode. It has no effect if called with the device in inactive state. + */ +void msm_hs_request_clock_on(struct uart_port *uport) +{ + unsigned long flags; + + spin_lock_irqsave(&uport->lock, flags); + msm_hs_request_clock_on_locked(uport); + spin_unlock_irqrestore(&uport->lock, flags); +} + +static irqreturn_t msm_hs_rx_wakeup_isr(int irq, void *dev) +{ + unsigned int wakeup = 0; + unsigned long flags; + struct msm_hs_port *msm_uport = dev; + struct uart_port *uport = &msm_uport->uport; + struct tty_struct *tty = NULL; + + spin_lock_irqsave(&uport->lock, flags); + if (msm_uport->clk_state == MSM_HS_CLK_OFF) { + /* ignore the first irq - it is a pending irq that occured + * before enable_irq() */ + if (msm_uport->rx_wakeup.ignore) + msm_uport->rx_wakeup.ignore = 0; + else + wakeup = 1; + } + + if (wakeup) { + /* the uart was clocked off during an rx, wake up and + * optionally inject char into tty rx */ + msm_hs_request_clock_on_locked(uport); + if (msm_uport->rx_wakeup.inject_rx) { + tty = uport->state->port.tty; + tty_insert_flip_char(tty, + msm_uport->rx_wakeup.rx_to_inject, + TTY_NORMAL); + queue_work(msm_hs_workqueue, &msm_uport->rx.tty_work); + } + } + + spin_unlock_irqrestore(&uport->lock, flags); + + return IRQ_HANDLED; +} + +static const char *msm_hs_type(struct uart_port *port) +{ + return (port->type == PORT_MSM) ? "MSM_HS_UART" : NULL; +} + +/* Called when port is opened */ +static int msm_hs_startup(struct uart_port *uport) +{ + int ret; + int rfr_level; + unsigned long flags; + unsigned int data; + struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport); + struct circ_buf *tx_buf = &uport->state->xmit; + struct msm_hs_tx *tx = &msm_uport->tx; + struct msm_hs_rx *rx = &msm_uport->rx; + + rfr_level = uport->fifosize; + if (rfr_level > 16) + rfr_level -= 16; + + tx->dma_base = dma_map_single(uport->dev, tx_buf->buf, UART_XMIT_SIZE, + DMA_TO_DEVICE); + + /* do not let tty layer execute RX in global workqueue, use a + * dedicated workqueue managed by this driver */ + uport->state->port.tty->low_latency = 1; + + /* turn on uart clk */ + ret = msm_hs_init_clk_locked(uport); + if (unlikely(ret)) { + printk(KERN_ERR "Turning uartclk failed!\n"); + goto err_msm_hs_init_clk; + } + + /* Set auto RFR Level */ + data = msm_hs_read(uport, UARTDM_MR1_ADDR); + data &= ~UARTDM_MR1_AUTO_RFR_LEVEL1_BMSK; + data &= ~UARTDM_MR1_AUTO_RFR_LEVEL0_BMSK; + data |= (UARTDM_MR1_AUTO_RFR_LEVEL1_BMSK & (rfr_level << 2)); + data |= (UARTDM_MR1_AUTO_RFR_LEVEL0_BMSK & rfr_level); + msm_hs_write(uport, UARTDM_MR1_ADDR, data); + + /* Make sure RXSTALE count is non-zero */ + data = msm_hs_read(uport, UARTDM_IPR_ADDR); + if (!data) { + data |= 0x1f & UARTDM_IPR_STALE_LSB_BMSK; + msm_hs_write(uport, UARTDM_IPR_ADDR, data); + } + + /* Enable Data Mover Mode */ + data = UARTDM_TX_DM_EN_BMSK | UARTDM_RX_DM_EN_BMSK; + msm_hs_write(uport, UARTDM_DMEN_ADDR, data); + + /* Reset TX */ + msm_hs_write(uport, UARTDM_CR_ADDR, RESET_TX); + msm_hs_write(uport, UARTDM_CR_ADDR, RESET_RX); + msm_hs_write(uport, UARTDM_CR_ADDR, RESET_ERROR_STATUS); + msm_hs_write(uport, UARTDM_CR_ADDR, RESET_BREAK_INT); + msm_hs_write(uport, UARTDM_CR_ADDR, RESET_STALE_INT); + msm_hs_write(uport, UARTDM_CR_ADDR, RESET_CTS); + msm_hs_write(uport, UARTDM_CR_ADDR, RFR_LOW); + /* Turn on Uart Receiver */ + msm_hs_write(uport, UARTDM_CR_ADDR, UARTDM_CR_RX_EN_BMSK); + + /* Turn on Uart Transmitter */ + msm_hs_write(uport, UARTDM_CR_ADDR, UARTDM_CR_TX_EN_BMSK); + + /* Initialize the tx */ + tx->tx_ready_int_en = 0; + tx->dma_in_flight = 0; + + tx->xfer.complete_func = msm_hs_dmov_tx_callback; + tx->xfer.execute_func = NULL; + + tx->command_ptr->cmd = CMD_LC | + CMD_DST_CRCI(msm_uport->dma_tx_crci) | CMD_MODE_BOX; + + tx->command_ptr->src_dst_len = (MSM_UARTDM_BURST_SIZE << 16) + | (MSM_UARTDM_BURST_SIZE); + + tx->command_ptr->row_offset = (MSM_UARTDM_BURST_SIZE << 16); + + tx->command_ptr->dst_row_addr = + msm_uport->uport.mapbase + UARTDM_TF_ADDR; + + + /* Turn on Uart Receive */ + rx->xfer.complete_func = msm_hs_dmov_rx_callback; + rx->xfer.execute_func = NULL; + + rx->command_ptr->cmd = CMD_LC | + CMD_SRC_CRCI(msm_uport->dma_rx_crci) | CMD_MODE_BOX; + + rx->command_ptr->src_dst_len = (MSM_UARTDM_BURST_SIZE << 16) + | (MSM_UARTDM_BURST_SIZE); + rx->command_ptr->row_offset = MSM_UARTDM_BURST_SIZE; + rx->command_ptr->src_row_addr = uport->mapbase + UARTDM_RF_ADDR; + + + msm_uport->imr_reg |= UARTDM_ISR_RXSTALE_BMSK; + /* Enable reading the current CTS, no harm even if CTS is ignored */ + msm_uport->imr_reg |= UARTDM_ISR_CURRENT_CTS_BMSK; + + msm_hs_write(uport, UARTDM_TFWR_ADDR, 0); /* TXLEV on empty TX fifo */ + + + ret = request_irq(uport->irq, msm_hs_isr, IRQF_TRIGGER_HIGH, + "msm_hs_uart", msm_uport); + if (unlikely(ret)) { + printk(KERN_ERR "Request msm_hs_uart IRQ failed!\n"); + goto err_request_irq; + } + if (use_low_power_rx_wakeup(msm_uport)) { + ret = request_irq(msm_uport->rx_wakeup.irq, + msm_hs_rx_wakeup_isr, + IRQF_TRIGGER_FALLING, + "msm_hs_rx_wakeup", msm_uport); + if (unlikely(ret)) { + printk(KERN_ERR "Request msm_hs_rx_wakeup IRQ failed!\n"); + free_irq(uport->irq, msm_uport); + goto err_request_irq; + } + disable_irq(msm_uport->rx_wakeup.irq); + } + + spin_lock_irqsave(&uport->lock, flags); + + msm_hs_write(uport, UARTDM_RFWR_ADDR, 0); + msm_hs_start_rx_locked(uport); + + spin_unlock_irqrestore(&uport->lock, flags); + ret = pm_runtime_set_active(uport->dev); + if (ret) + dev_err(uport->dev, "set active error:%d\n", ret); + pm_runtime_enable(uport->dev); + + return 0; + +err_request_irq: +err_msm_hs_init_clk: + dma_unmap_single(uport->dev, tx->dma_base, + UART_XMIT_SIZE, DMA_TO_DEVICE); + return ret; +} + +/* Initialize tx and rx data structures */ +static int __devinit uartdm_init_port(struct uart_port *uport) +{ + int ret = 0; + struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport); + struct msm_hs_tx *tx = &msm_uport->tx; + struct msm_hs_rx *rx = &msm_uport->rx; + + /* Allocate the command pointer. Needs to be 64 bit aligned */ + tx->command_ptr = kmalloc(sizeof(dmov_box), GFP_KERNEL | __GFP_DMA); + if (!tx->command_ptr) + return -ENOMEM; + + tx->command_ptr_ptr = kmalloc(sizeof(u32 *), GFP_KERNEL | __GFP_DMA); + if (!tx->command_ptr_ptr) { + ret = -ENOMEM; + goto err_tx_command_ptr_ptr; + } + + tx->mapped_cmd_ptr = dma_map_single(uport->dev, tx->command_ptr, + sizeof(dmov_box), DMA_TO_DEVICE); + tx->mapped_cmd_ptr_ptr = dma_map_single(uport->dev, + tx->command_ptr_ptr, + sizeof(u32 *), DMA_TO_DEVICE); + tx->xfer.cmdptr = DMOV_CMD_ADDR(tx->mapped_cmd_ptr_ptr); + + init_waitqueue_head(&rx->wait); + + rx->pool = dma_pool_create("rx_buffer_pool", uport->dev, + UARTDM_RX_BUF_SIZE, 16, 0); + if (!rx->pool) { + pr_err("%s(): cannot allocate rx_buffer_pool", __func__); + ret = -ENOMEM; + goto err_dma_pool_create; + } + + rx->buffer = dma_pool_alloc(rx->pool, GFP_KERNEL, &rx->rbuffer); + if (!rx->buffer) { + pr_err("%s(): cannot allocate rx->buffer", __func__); + ret = -ENOMEM; + goto err_dma_pool_alloc; + } + + /* Allocate the command pointer. Needs to be 64 bit aligned */ + rx->command_ptr = kmalloc(sizeof(dmov_box), GFP_KERNEL | __GFP_DMA); + if (!rx->command_ptr) { + pr_err("%s(): cannot allocate rx->command_ptr", __func__); + ret = -ENOMEM; + goto err_rx_command_ptr; + } + + rx->command_ptr_ptr = kmalloc(sizeof(u32 *), GFP_KERNEL | __GFP_DMA); + if (!rx->command_ptr_ptr) { + pr_err("%s(): cannot allocate rx->command_ptr_ptr", __func__); + ret = -ENOMEM; + goto err_rx_command_ptr_ptr; + } + + rx->command_ptr->num_rows = ((UARTDM_RX_BUF_SIZE >> 4) << 16) | + (UARTDM_RX_BUF_SIZE >> 4); + + rx->command_ptr->dst_row_addr = rx->rbuffer; + + rx->mapped_cmd_ptr = dma_map_single(uport->dev, rx->command_ptr, + sizeof(dmov_box), DMA_TO_DEVICE); + + *rx->command_ptr_ptr = CMD_PTR_LP | DMOV_CMD_ADDR(rx->mapped_cmd_ptr); + + rx->cmdptr_dmaaddr = dma_map_single(uport->dev, rx->command_ptr_ptr, + sizeof(u32 *), DMA_TO_DEVICE); + rx->xfer.cmdptr = DMOV_CMD_ADDR(rx->cmdptr_dmaaddr); + + INIT_WORK(&rx->tty_work, msm_hs_tty_flip_buffer_work); + + return ret; + +err_rx_command_ptr_ptr: + kfree(rx->command_ptr); +err_rx_command_ptr: + dma_pool_free(msm_uport->rx.pool, msm_uport->rx.buffer, + msm_uport->rx.rbuffer); +err_dma_pool_alloc: + dma_pool_destroy(msm_uport->rx.pool); +err_dma_pool_create: + dma_unmap_single(uport->dev, msm_uport->tx.mapped_cmd_ptr_ptr, + sizeof(u32 *), DMA_TO_DEVICE); + dma_unmap_single(uport->dev, msm_uport->tx.mapped_cmd_ptr, + sizeof(dmov_box), DMA_TO_DEVICE); + kfree(msm_uport->tx.command_ptr_ptr); +err_tx_command_ptr_ptr: + kfree(msm_uport->tx.command_ptr); + return ret; +} + +static int __devinit msm_hs_probe(struct platform_device *pdev) +{ + int ret; + struct uart_port *uport; + struct msm_hs_port *msm_uport; + struct resource *resource; + const struct msm_serial_hs_platform_data *pdata = + pdev->dev.platform_data; + + if (pdev->id < 0 || pdev->id >= UARTDM_NR) { + printk(KERN_ERR "Invalid plaform device ID = %d\n", pdev->id); + return -EINVAL; + } + + msm_uport = &q_uart_port[pdev->id]; + uport = &msm_uport->uport; + + uport->dev = &pdev->dev; + + resource = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (unlikely(!resource)) + return -ENXIO; + + uport->mapbase = resource->start; + uport->irq = platform_get_irq(pdev, 0); + if (unlikely(uport->irq < 0)) + return -ENXIO; + + if (unlikely(set_irq_wake(uport->irq, 1))) + return -ENXIO; + + if (pdata == NULL || pdata->rx_wakeup_irq < 0) + msm_uport->rx_wakeup.irq = -1; + else { + msm_uport->rx_wakeup.irq = pdata->rx_wakeup_irq; + msm_uport->rx_wakeup.ignore = 1; + msm_uport->rx_wakeup.inject_rx = pdata->inject_rx_on_wakeup; + msm_uport->rx_wakeup.rx_to_inject = pdata->rx_to_inject; + + if (unlikely(msm_uport->rx_wakeup.irq < 0)) + return -ENXIO; + + if (unlikely(set_irq_wake(msm_uport->rx_wakeup.irq, 1))) + return -ENXIO; + } + + if (pdata == NULL) + msm_uport->exit_lpm_cb = NULL; + else + msm_uport->exit_lpm_cb = pdata->exit_lpm_cb; + + resource = platform_get_resource_byname(pdev, IORESOURCE_DMA, + "uartdm_channels"); + if (unlikely(!resource)) + return -ENXIO; + + msm_uport->dma_tx_channel = resource->start; + msm_uport->dma_rx_channel = resource->end; + + resource = platform_get_resource_byname(pdev, IORESOURCE_DMA, + "uartdm_crci"); + if (unlikely(!resource)) + return -ENXIO; + + msm_uport->dma_tx_crci = resource->start; + msm_uport->dma_rx_crci = resource->end; + + uport->iotype = UPIO_MEM; + uport->fifosize = UART_FIFOSIZE; + uport->ops = &msm_hs_ops; + uport->flags = UPF_BOOT_AUTOCONF; + uport->uartclk = UARTCLK; + msm_uport->imr_reg = 0x0; + msm_uport->clk = clk_get(&pdev->dev, "uartdm_clk"); + if (IS_ERR(msm_uport->clk)) + return PTR_ERR(msm_uport->clk); + + ret = uartdm_init_port(uport); + if (unlikely(ret)) + return ret; + + msm_uport->clk_state = MSM_HS_CLK_PORT_OFF; + hrtimer_init(&msm_uport->clk_off_timer, CLOCK_MONOTONIC, + HRTIMER_MODE_REL); + msm_uport->clk_off_timer.function = msm_hs_clk_off_retry; + msm_uport->clk_off_delay = ktime_set(0, 1000000); /* 1ms */ + + uport->line = pdev->id; + return uart_add_one_port(&msm_hs_driver, uport); +} + +static int __init msm_serial_hs_init(void) +{ + int ret, i; + + /* Init all UARTS as non-configured */ + for (i = 0; i < UARTDM_NR; i++) + q_uart_port[i].uport.type = PORT_UNKNOWN; + + msm_hs_workqueue = create_singlethread_workqueue("msm_serial_hs"); + if (unlikely(!msm_hs_workqueue)) + return -ENOMEM; + + ret = uart_register_driver(&msm_hs_driver); + if (unlikely(ret)) { + printk(KERN_ERR "%s failed to load\n", __func__); + goto err_uart_register_driver; + } + + ret = platform_driver_register(&msm_serial_hs_platform_driver); + if (ret) { + printk(KERN_ERR "%s failed to load\n", __func__); + goto err_platform_driver_register; + } + + return ret; + +err_platform_driver_register: + uart_unregister_driver(&msm_hs_driver); +err_uart_register_driver: + destroy_workqueue(msm_hs_workqueue); + return ret; +} +module_init(msm_serial_hs_init); + +/* + * Called by the upper layer when port is closed. + * - Disables the port + * - Unhook the ISR + */ +static void msm_hs_shutdown(struct uart_port *uport) +{ + unsigned long flags; + struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport); + + BUG_ON(msm_uport->rx.flush < FLUSH_STOP); + + spin_lock_irqsave(&uport->lock, flags); + clk_enable(msm_uport->clk); + + /* Disable the transmitter */ + msm_hs_write(uport, UARTDM_CR_ADDR, UARTDM_CR_TX_DISABLE_BMSK); + /* Disable the receiver */ + msm_hs_write(uport, UARTDM_CR_ADDR, UARTDM_CR_RX_DISABLE_BMSK); + + pm_runtime_disable(uport->dev); + pm_runtime_set_suspended(uport->dev); + + /* Free the interrupt */ + free_irq(uport->irq, msm_uport); + if (use_low_power_rx_wakeup(msm_uport)) + free_irq(msm_uport->rx_wakeup.irq, msm_uport); + + msm_uport->imr_reg = 0; + msm_hs_write(uport, UARTDM_IMR_ADDR, msm_uport->imr_reg); + + wait_event(msm_uport->rx.wait, msm_uport->rx.flush == FLUSH_SHUTDOWN); + + clk_disable(msm_uport->clk); /* to balance local clk_enable() */ + if (msm_uport->clk_state != MSM_HS_CLK_OFF) + clk_disable(msm_uport->clk); /* to balance clk_state */ + msm_uport->clk_state = MSM_HS_CLK_PORT_OFF; + + dma_unmap_single(uport->dev, msm_uport->tx.dma_base, + UART_XMIT_SIZE, DMA_TO_DEVICE); + + spin_unlock_irqrestore(&uport->lock, flags); + + if (cancel_work_sync(&msm_uport->rx.tty_work)) + msm_hs_tty_flip_buffer_work(&msm_uport->rx.tty_work); +} + +static void __exit msm_serial_hs_exit(void) +{ + flush_workqueue(msm_hs_workqueue); + destroy_workqueue(msm_hs_workqueue); + platform_driver_unregister(&msm_serial_hs_platform_driver); + uart_unregister_driver(&msm_hs_driver); +} +module_exit(msm_serial_hs_exit); + +#ifdef CONFIG_PM_RUNTIME +static int msm_hs_runtime_idle(struct device *dev) +{ + /* + * returning success from idle results in runtime suspend to be + * called + */ + return 0; +} + +static int msm_hs_runtime_resume(struct device *dev) +{ + struct platform_device *pdev = container_of(dev, struct + platform_device, dev); + struct msm_hs_port *msm_uport = &q_uart_port[pdev->id]; + + msm_hs_request_clock_on(&msm_uport->uport); + return 0; +} + +static int msm_hs_runtime_suspend(struct device *dev) +{ + struct platform_device *pdev = container_of(dev, struct + platform_device, dev); + struct msm_hs_port *msm_uport = &q_uart_port[pdev->id]; + + msm_hs_request_clock_off(&msm_uport->uport); + return 0; +} +#else +#define msm_hs_runtime_idle NULL +#define msm_hs_runtime_resume NULL +#define msm_hs_runtime_suspend NULL +#endif + +static const struct dev_pm_ops msm_hs_dev_pm_ops = { + .runtime_suspend = msm_hs_runtime_suspend, + .runtime_resume = msm_hs_runtime_resume, + .runtime_idle = msm_hs_runtime_idle, +}; + +static struct platform_driver msm_serial_hs_platform_driver = { + .probe = msm_hs_probe, + .remove = __devexit_p(msm_hs_remove), + .driver = { + .name = "msm_serial_hs", + .owner = THIS_MODULE, + .pm = &msm_hs_dev_pm_ops, + }, +}; + +static struct uart_driver msm_hs_driver = { + .owner = THIS_MODULE, + .driver_name = "msm_serial_hs", + .dev_name = "ttyHS", + .nr = UARTDM_NR, + .cons = 0, +}; + +static struct uart_ops msm_hs_ops = { + .tx_empty = msm_hs_tx_empty, + .set_mctrl = msm_hs_set_mctrl_locked, + .get_mctrl = msm_hs_get_mctrl_locked, + .stop_tx = msm_hs_stop_tx_locked, + .start_tx = msm_hs_start_tx_locked, + .stop_rx = msm_hs_stop_rx_locked, + .enable_ms = msm_hs_enable_ms_locked, + .break_ctl = msm_hs_break_ctl, + .startup = msm_hs_startup, + .shutdown = msm_hs_shutdown, + .set_termios = msm_hs_set_termios, + .pm = msm_hs_pm, + .type = msm_hs_type, + .config_port = msm_hs_config_port, + .release_port = msm_hs_release_port, + .request_port = msm_hs_request_port, +}; + +MODULE_DESCRIPTION("High Speed UART Driver for the MSM chipset"); +MODULE_VERSION("1.2"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/tty/serial/msm_smd_tty.c b/drivers/tty/serial/msm_smd_tty.c new file mode 100644 index 0000000..beeff1e --- /dev/null +++ b/drivers/tty/serial/msm_smd_tty.c @@ -0,0 +1,236 @@ +/* drivers/tty/serial/msm_smd_tty.c + * + * Copyright (C) 2007 Google, Inc. + * Copyright (c) 2011, Code Aurora Forum. All rights reserved. + * Author: Brian Swetland <swetland@google.com> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/module.h> +#include <linux/fs.h> +#include <linux/cdev.h> +#include <linux/device.h> +#include <linux/wait.h> + +#include <linux/tty.h> +#include <linux/tty_driver.h> +#include <linux/tty_flip.h> + +#include <mach/msm_smd.h> + +#define MAX_SMD_TTYS 32 + +struct smd_tty_info { + struct tty_port port; + smd_channel_t *ch; +}; + +struct smd_tty_channel_desc { + int id; + const char *name; +}; + +static struct smd_tty_info smd_tty[MAX_SMD_TTYS]; + +static const struct smd_tty_channel_desc smd_default_tty_channels[] = { + { .id = 0, .name = "SMD_DS" }, + { .id = 27, .name = "SMD_GPSNMEA" }, +}; + +static const struct smd_tty_channel_desc *smd_tty_channels = + smd_default_tty_channels; +static int smd_tty_channels_len = ARRAY_SIZE(smd_default_tty_channels); + +static void smd_tty_notify(void *priv, unsigned event) +{ + unsigned char *ptr; + int avail; + struct smd_tty_info *info = priv; + struct tty_struct *tty; + + if (event != SMD_EVENT_DATA) + return; + + tty = tty_port_tty_get(&info->port); + if (!tty) + return; + + for (;;) { + if (test_bit(TTY_THROTTLED, &tty->flags)) + break; + avail = smd_read_avail(info->ch); + if (avail == 0) + break; + + avail = tty_prepare_flip_string(tty, &ptr, avail); + + if (smd_read(info->ch, ptr, avail) != avail) { + /* shouldn't be possible since we're in interrupt + ** context here and nobody else could 'steal' our + ** characters. + */ + pr_err("OOPS - smd_tty_buffer mismatch?!"); + } + + tty_flip_buffer_push(tty); + } + + /* XXX only when writable and necessary */ + tty_wakeup(tty); + tty_kref_put(tty); +} + +static int smd_tty_port_activate(struct tty_port *tport, struct tty_struct *tty) +{ + int i, res = 0; + int n = tty->index; + const char *name = NULL; + struct smd_tty_info *info = smd_tty + n; + + for (i = 0; i < smd_tty_channels_len; i++) { + if (smd_tty_channels[i].id == n) { + name = smd_tty_channels[i].name; + break; + } + } + if (!name) + return -ENODEV; + + if (info->ch) + smd_kick(info->ch); + else + res = smd_open(name, &info->ch, info, smd_tty_notify); + + if (!res) + tty->driver_data = info; + + return res; +} + +static void smd_tty_port_shutdown(struct tty_port *tport) +{ + struct smd_tty_info *info; + struct tty_struct *tty = tty_port_tty_get(tport); + + info = tty->driver_data; + if (info->ch) { + smd_close(info->ch); + info->ch = 0; + } + + tty->driver_data = 0; + tty_kref_put(tty); +} + +static int smd_tty_open(struct tty_struct *tty, struct file *f) +{ + struct smd_tty_info *info = smd_tty + tty->index; + + return tty_port_open(&info->port, tty, f); +} + +static void smd_tty_close(struct tty_struct *tty, struct file *f) +{ + struct smd_tty_info *info = tty->driver_data; + + tty_port_close(&info->port, tty, f); +} + +static int smd_tty_write(struct tty_struct *tty, + const unsigned char *buf, int len) +{ + struct smd_tty_info *info = tty->driver_data; + int avail; + + /* if we're writing to a packet channel we will + ** never be able to write more data than there + ** is currently space for + */ + avail = smd_write_avail(info->ch); + if (len > avail) + len = avail; + + return smd_write(info->ch, buf, len); +} + +static int smd_tty_write_room(struct tty_struct *tty) +{ + struct smd_tty_info *info = tty->driver_data; + return smd_write_avail(info->ch); +} + +static int smd_tty_chars_in_buffer(struct tty_struct *tty) +{ + struct smd_tty_info *info = tty->driver_data; + return smd_read_avail(info->ch); +} + +static void smd_tty_unthrottle(struct tty_struct *tty) +{ + struct smd_tty_info *info = tty->driver_data; + smd_kick(info->ch); +} + +static const struct tty_port_operations smd_tty_port_ops = { + .shutdown = smd_tty_port_shutdown, + .activate = smd_tty_port_activate, +}; + +static const struct tty_operations smd_tty_ops = { + .open = smd_tty_open, + .close = smd_tty_close, + .write = smd_tty_write, + .write_room = smd_tty_write_room, + .chars_in_buffer = smd_tty_chars_in_buffer, + .unthrottle = smd_tty_unthrottle, +}; + +static struct tty_driver *smd_tty_driver; + +static int __init smd_tty_init(void) +{ + int ret, i; + + smd_tty_driver = alloc_tty_driver(MAX_SMD_TTYS); + if (smd_tty_driver == 0) + return -ENOMEM; + + smd_tty_driver->owner = THIS_MODULE; + smd_tty_driver->driver_name = "smd_tty_driver"; + smd_tty_driver->name = "smd"; + smd_tty_driver->major = 0; + smd_tty_driver->minor_start = 0; + smd_tty_driver->type = TTY_DRIVER_TYPE_SERIAL; + smd_tty_driver->subtype = SERIAL_TYPE_NORMAL; + smd_tty_driver->init_termios = tty_std_termios; + smd_tty_driver->init_termios.c_iflag = 0; + smd_tty_driver->init_termios.c_oflag = 0; + smd_tty_driver->init_termios.c_cflag = B38400 | CS8 | CREAD; + smd_tty_driver->init_termios.c_lflag = 0; + smd_tty_driver->flags = TTY_DRIVER_RESET_TERMIOS | + TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV; + tty_set_operations(smd_tty_driver, &smd_tty_ops); + + ret = tty_register_driver(smd_tty_driver); + if (ret) + return ret; + + for (i = 0; i < smd_tty_channels_len; i++) { + tty_port_init(&smd_tty[smd_tty_channels[i].id].port); + smd_tty[smd_tty_channels[i].id].port.ops = &smd_tty_port_ops; + tty_register_device(smd_tty_driver, smd_tty_channels[i].id, 0); + } + + return 0; +} + +module_init(smd_tty_init); diff --git a/drivers/tty/serial/of_serial.c b/drivers/tty/serial/of_serial.c index 5c7abe4..0e8eec5 100644 --- a/drivers/tty/serial/of_serial.c +++ b/drivers/tty/serial/of_serial.c @@ -80,14 +80,16 @@ static int __devinit of_platform_serial_setup(struct platform_device *ofdev, /* * Try to register a serial port */ -static int __devinit of_platform_serial_probe(struct platform_device *ofdev, - const struct of_device_id *id) +static int __devinit of_platform_serial_probe(struct platform_device *ofdev) { struct of_serial_info *info; struct uart_port port; int port_type; int ret; + if (!ofdev->dev.of_match) + return -EINVAL; + if (of_find_property(ofdev->dev.of_node, "used-by-rtas", NULL)) return -EBUSY; @@ -95,7 +97,7 @@ static int __devinit of_platform_serial_probe(struct platform_device *ofdev, if (info == NULL) return -ENOMEM; - port_type = (unsigned long)id->data; + port_type = (unsigned long)ofdev->dev.of_match->data; ret = of_platform_serial_setup(ofdev, port_type, &port); if (ret) goto out; @@ -160,21 +162,21 @@ static int of_platform_serial_remove(struct platform_device *ofdev) * A few common types, add more as needed. */ static struct of_device_id __devinitdata of_platform_serial_table[] = { - { .type = "serial", .compatible = "ns8250", .data = (void *)PORT_8250, }, - { .type = "serial", .compatible = "ns16450", .data = (void *)PORT_16450, }, - { .type = "serial", .compatible = "ns16550a", .data = (void *)PORT_16550A, }, - { .type = "serial", .compatible = "ns16550", .data = (void *)PORT_16550, }, - { .type = "serial", .compatible = "ns16750", .data = (void *)PORT_16750, }, - { .type = "serial", .compatible = "ns16850", .data = (void *)PORT_16850, }, + { .compatible = "ns8250", .data = (void *)PORT_8250, }, + { .compatible = "ns16450", .data = (void *)PORT_16450, }, + { .compatible = "ns16550a", .data = (void *)PORT_16550A, }, + { .compatible = "ns16550", .data = (void *)PORT_16550, }, + { .compatible = "ns16750", .data = (void *)PORT_16750, }, + { .compatible = "ns16850", .data = (void *)PORT_16850, }, #ifdef CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL - { .type = "serial", .compatible = "ibm,qpace-nwp-serial", - .data = (void *)PORT_NWPSERIAL, }, + { .compatible = "ibm,qpace-nwp-serial", + .data = (void *)PORT_NWPSERIAL, }, #endif - { .type = "serial", .data = (void *)PORT_UNKNOWN, }, + { .type = "serial", .data = (void *)PORT_UNKNOWN, }, { /* end of list */ }, }; -static struct of_platform_driver of_platform_serial_driver = { +static struct platform_driver of_platform_serial_driver = { .driver = { .name = "of_serial", .owner = THIS_MODULE, @@ -186,13 +188,13 @@ static struct of_platform_driver of_platform_serial_driver = { static int __init of_platform_serial_init(void) { - return of_register_platform_driver(&of_platform_serial_driver); + return platform_driver_register(&of_platform_serial_driver); } module_init(of_platform_serial_init); static void __exit of_platform_serial_exit(void) { - return of_unregister_platform_driver(&of_platform_serial_driver); + return platform_driver_unregister(&of_platform_serial_driver); }; module_exit(of_platform_serial_exit); diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index 7f2f010..7635379 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -20,6 +20,10 @@ * this driver as required for the omap-platform. */ +#if defined(CONFIG_SERIAL_OMAP_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + #include <linux/module.h> #include <linux/init.h> #include <linux/console.h> @@ -190,7 +194,6 @@ static inline void receive_chars(struct uart_omap_port *up, int *status) if (up->port.line == up->port.cons->index) { /* Recover the break flag from console xmit */ lsr |= up->lsr_break_flag; - up->lsr_break_flag = 0; } #endif if (lsr & UART_LSR_BI) @@ -517,6 +520,9 @@ static int serial_omap_startup(struct uart_port *port) up->ier = UART_IER_RLSI | UART_IER_RDI; serial_out(up, UART_IER, up->ier); + /* Enable module level wake up */ + serial_out(up, UART_OMAP_WER, OMAP_UART_WER_MOD_WKUP); + up->port_activity = jiffies; return 0; } @@ -824,9 +830,6 @@ serial_omap_pm(struct uart_port *port, unsigned int state, serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); serial_out(up, UART_EFR, efr); serial_out(up, UART_LCR, 0); - /* Enable module level wake up */ - serial_out(up, UART_OMAP_WER, - (state != 0) ? OMAP_UART_WER_MOD_WKUP : 0); } static void serial_omap_release_port(struct uart_port *port) diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c index 70a6145..a9ad7f3 100644 --- a/drivers/tty/serial/pch_uart.c +++ b/drivers/tty/serial/pch_uart.c @@ -21,6 +21,7 @@ #include <linux/serial_core.h> #include <linux/interrupt.h> #include <linux/io.h> +#include <linux/dmi.h> #include <linux/dmaengine.h> #include <linux/pch_dma.h> @@ -40,10 +41,11 @@ enum { #define PCH_UART_DRIVER_DEVICE "ttyPCH" -#define PCH_UART_NR_GE_256FIFO 1 -#define PCH_UART_NR_GE_64FIFO 3 -#define PCH_UART_NR_GE (PCH_UART_NR_GE_256FIFO+PCH_UART_NR_GE_64FIFO) -#define PCH_UART_NR PCH_UART_NR_GE +/* Set the max number of UART port + * Intel EG20T PCH: 4 port + * OKI SEMICONDUCTOR ML7213 IOH: 3 port +*/ +#define PCH_UART_NR 4 #define PCH_UART_HANDLED_RX_INT (1<<((PCH_UART_HANDLED_RX_INT_SHIFT)<<1)) #define PCH_UART_HANDLED_TX_INT (1<<((PCH_UART_HANDLED_TX_INT_SHIFT)<<1)) @@ -192,6 +194,8 @@ enum { #define PCH_UART_HAL_LOOP (PCH_UART_MCR_LOOP) #define PCH_UART_HAL_AFE (PCH_UART_MCR_AFE) +#define PCI_VENDOR_ID_ROHM 0x10DB + struct pch_uart_buffer { unsigned char *buf; int size; @@ -215,6 +219,7 @@ struct eg20t_port { struct pch_uart_buffer rxbuf; unsigned int dmsr; unsigned int fcr; + unsigned int mcr; unsigned int use_dma; unsigned int use_dma_flag; struct dma_async_tx_descriptor *desc_tx; @@ -223,13 +228,44 @@ struct eg20t_port { struct pch_dma_slave param_rx; struct dma_chan *chan_tx; struct dma_chan *chan_rx; - struct scatterlist sg_tx; + struct scatterlist *sg_tx_p; + int nent; struct scatterlist sg_rx; int tx_dma_use; void *rx_buf_virt; dma_addr_t rx_buf_dma; }; +/** + * struct pch_uart_driver_data - private data structure for UART-DMA + * @port_type: The number of DMA channel + * @line_no: UART port line number (0, 1, 2...) + */ +struct pch_uart_driver_data { + int port_type; + int line_no; +}; + +enum pch_uart_num_t { + pch_et20t_uart0 = 0, + pch_et20t_uart1, + pch_et20t_uart2, + pch_et20t_uart3, + pch_ml7213_uart0, + pch_ml7213_uart1, + pch_ml7213_uart2, +}; + +static struct pch_uart_driver_data drv_dat[] = { + [pch_et20t_uart0] = {PCH_UART_8LINE, 0}, + [pch_et20t_uart1] = {PCH_UART_2LINE, 1}, + [pch_et20t_uart2] = {PCH_UART_2LINE, 2}, + [pch_et20t_uart3] = {PCH_UART_2LINE, 3}, + [pch_ml7213_uart0] = {PCH_UART_8LINE, 0}, + [pch_ml7213_uart1] = {PCH_UART_2LINE, 1}, + [pch_ml7213_uart2] = {PCH_UART_2LINE, 2}, +}; + static unsigned int default_baud = 9600; static const int trigger_level_256[4] = { 1, 64, 128, 224 }; static const int trigger_level_64[4] = { 1, 16, 32, 56 }; @@ -278,7 +314,7 @@ static int pch_uart_hal_set_line(struct eg20t_port *priv, int baud, div = DIV_ROUND(priv->base_baud / 16, baud); if (div < 0 || USHRT_MAX <= div) { - pr_err("Invalid Baud(div=0x%x)\n", div); + dev_err(priv->port.dev, "Invalid Baud(div=0x%x)\n", div); return -EINVAL; } @@ -286,17 +322,17 @@ static int pch_uart_hal_set_line(struct eg20t_port *priv, int baud, dlm = ((unsigned int)div >> 8) & 0x00FFU; if (parity & ~(PCH_UART_LCR_PEN | PCH_UART_LCR_EPS | PCH_UART_LCR_SP)) { - pr_err("Invalid parity(0x%x)\n", parity); + dev_err(priv->port.dev, "Invalid parity(0x%x)\n", parity); return -EINVAL; } if (bits & ~PCH_UART_LCR_WLS) { - pr_err("Invalid bits(0x%x)\n", bits); + dev_err(priv->port.dev, "Invalid bits(0x%x)\n", bits); return -EINVAL; } if (stb & ~PCH_UART_LCR_STB) { - pr_err("Invalid STB(0x%x)\n", stb); + dev_err(priv->port.dev, "Invalid STB(0x%x)\n", stb); return -EINVAL; } @@ -304,7 +340,7 @@ static int pch_uart_hal_set_line(struct eg20t_port *priv, int baud, lcr |= bits; lcr |= stb; - pr_debug("%s:baud = %d, div = %04x, lcr = %02x (%lu)\n", + dev_dbg(priv->port.dev, "%s:baud = %d, div = %04x, lcr = %02x (%lu)\n", __func__, baud, div, lcr, jiffies); iowrite8(PCH_UART_LCR_DLAB, priv->membase + UART_LCR); iowrite8(dll, priv->membase + PCH_UART_DLL); @@ -318,7 +354,8 @@ static int pch_uart_hal_fifo_reset(struct eg20t_port *priv, unsigned int flag) { if (flag & ~(PCH_UART_FCR_TFR | PCH_UART_FCR_RFR)) { - pr_err("%s:Invalid flag(0x%x)\n", __func__, flag); + dev_err(priv->port.dev, "%s:Invalid flag(0x%x)\n", + __func__, flag); return -EINVAL; } @@ -337,17 +374,20 @@ static int pch_uart_hal_set_fifo(struct eg20t_port *priv, u8 fcr; if (dmamode & ~PCH_UART_FCR_DMS) { - pr_err("%s:Invalid DMA Mode(0x%x)\n", __func__, dmamode); + dev_err(priv->port.dev, "%s:Invalid DMA Mode(0x%x)\n", + __func__, dmamode); return -EINVAL; } if (fifo_size & ~(PCH_UART_FCR_FIFOE | PCH_UART_FCR_FIFO256)) { - pr_err("%s:Invalid FIFO SIZE(0x%x)\n", __func__, fifo_size); + dev_err(priv->port.dev, "%s:Invalid FIFO SIZE(0x%x)\n", + __func__, fifo_size); return -EINVAL; } if (trigger & ~PCH_UART_FCR_RFTL) { - pr_err("%s:Invalid TRIGGER(0x%x)\n", __func__, trigger); + dev_err(priv->port.dev, "%s:Invalid TRIGGER(0x%x)\n", + __func__, trigger); return -EINVAL; } @@ -386,7 +426,7 @@ static u8 pch_uart_hal_get_modem(struct eg20t_port *priv) return get_msr(priv, priv->membase); } -static int pch_uart_hal_write(struct eg20t_port *priv, +static void pch_uart_hal_write(struct eg20t_port *priv, const unsigned char *buf, int tx_size) { int i; @@ -396,7 +436,6 @@ static int pch_uart_hal_write(struct eg20t_port *priv, thr = buf[i++]; iowrite8(thr, priv->membase + PCH_UART_THR); } - return i; } static int pch_uart_hal_read(struct eg20t_port *priv, unsigned char *buf, @@ -452,7 +491,7 @@ static int push_rx(struct eg20t_port *priv, const unsigned char *buf, port = &priv->port; tty = tty_port_tty_get(&port->state->port); if (!tty) { - pr_debug("%s:tty is busy now", __func__); + dev_dbg(priv->port.dev, "%s:tty is busy now", __func__); return -EBUSY; } @@ -469,8 +508,8 @@ static int pop_tx_x(struct eg20t_port *priv, unsigned char *buf) struct uart_port *port = &priv->port; if (port->x_char) { - pr_debug("%s:X character send %02x (%lu)\n", __func__, - port->x_char, jiffies); + dev_dbg(priv->port.dev, "%s:X character send %02x (%lu)\n", + __func__, port->x_char, jiffies); buf[0] = port->x_char; port->x_char = 0; ret = 1; @@ -490,7 +529,7 @@ static int dma_push_rx(struct eg20t_port *priv, int size) port = &priv->port; tty = tty_port_tty_get(&port->state->port); if (!tty) { - pr_debug("%s:tty is busy now", __func__); + dev_dbg(priv->port.dev, "%s:tty is busy now", __func__); return 0; } @@ -560,11 +599,13 @@ static void pch_request_dma(struct uart_port *port) /* Set Tx DMA */ param = &priv->param_tx; param->dma_dev = &dma_dev->dev; - param->chan_id = priv->port.line; + param->chan_id = priv->port.line * 2; /* Tx = 0, 2, 4, ... */ + param->tx_reg = port->mapbase + UART_TX; chan = dma_request_channel(mask, filter, param); if (!chan) { - pr_err("%s:dma_request_channel FAILS(Tx)\n", __func__); + dev_err(priv->port.dev, "%s:dma_request_channel FAILS(Tx)\n", + __func__); return; } priv->chan_tx = chan; @@ -572,11 +613,13 @@ static void pch_request_dma(struct uart_port *port) /* Set Rx DMA */ param = &priv->param_rx; param->dma_dev = &dma_dev->dev; - param->chan_id = priv->port.line + 1; /* Rx = Tx + 1 */ + param->chan_id = priv->port.line * 2 + 1; /* Rx = Tx + 1 */ + param->rx_reg = port->mapbase + UART_RX; chan = dma_request_channel(mask, filter, param); if (!chan) { - pr_err("%s:dma_request_channel FAILS(Rx)\n", __func__); + dev_err(priv->port.dev, "%s:dma_request_channel FAILS(Rx)\n", + __func__); dma_release_channel(priv->chan_tx); return; } @@ -592,16 +635,20 @@ static void pch_dma_rx_complete(void *arg) struct eg20t_port *priv = arg; struct uart_port *port = &priv->port; struct tty_struct *tty = tty_port_tty_get(&port->state->port); + int count; if (!tty) { - pr_debug("%s:tty is busy now", __func__); + dev_dbg(priv->port.dev, "%s:tty is busy now", __func__); return; } - if (dma_push_rx(priv, priv->trigger_level)) + dma_sync_sg_for_cpu(port->dev, &priv->sg_rx, 1, DMA_FROM_DEVICE); + count = dma_push_rx(priv, priv->trigger_level); + if (count) tty_flip_buffer_push(tty); - tty_kref_put(tty); + async_tx_ack(priv->desc_rx); + pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_RX_INT); } static void pch_dma_tx_complete(void *arg) @@ -609,16 +656,23 @@ static void pch_dma_tx_complete(void *arg) struct eg20t_port *priv = arg; struct uart_port *port = &priv->port; struct circ_buf *xmit = &port->state->xmit; + struct scatterlist *sg = priv->sg_tx_p; + int i; - xmit->tail += sg_dma_len(&priv->sg_tx); + for (i = 0; i < priv->nent; i++, sg++) { + xmit->tail += sg_dma_len(sg); + port->icount.tx += sg_dma_len(sg); + } xmit->tail &= UART_XMIT_SIZE - 1; - port->icount.tx += sg_dma_len(&priv->sg_tx); - async_tx_ack(priv->desc_tx); + dma_unmap_sg(port->dev, sg, priv->nent, DMA_TO_DEVICE); priv->tx_dma_use = 0; + priv->nent = 0; + kfree(priv->sg_tx_p); + pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_TX_INT); } -static int pop_tx(struct eg20t_port *priv, unsigned char *buf, int size) +static int pop_tx(struct eg20t_port *priv, int size) { int count = 0; struct uart_port *port = &priv->port; @@ -631,13 +685,13 @@ static int pop_tx(struct eg20t_port *priv, unsigned char *buf, int size) int cnt_to_end = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE); int sz = min(size - count, cnt_to_end); - memcpy(&buf[count], &xmit->buf[xmit->tail], sz); + pch_uart_hal_write(priv, &xmit->buf[xmit->tail], sz); xmit->tail = (xmit->tail + sz) & (UART_XMIT_SIZE - 1); count += sz; } while (!uart_circ_empty(xmit) && count < size); pop_tx_end: - pr_debug("%d characters. Remained %d characters. (%lu)\n", + dev_dbg(priv->port.dev, "%d characters. Remained %d characters.(%lu)\n", count, size - count, jiffies); return count; @@ -679,7 +733,7 @@ static int dma_handle_rx(struct eg20t_port *priv) sg_init_table(&priv->sg_rx, 1); /* Initialize SG table */ - sg_dma_len(sg) = priv->fifo_size; + sg_dma_len(sg) = priv->trigger_level; sg_set_page(&priv->sg_rx, virt_to_page(priv->rx_buf_virt), sg_dma_len(sg), (unsigned long)priv->rx_buf_virt & @@ -689,7 +743,8 @@ static int dma_handle_rx(struct eg20t_port *priv) desc = priv->chan_rx->device->device_prep_slave_sg(priv->chan_rx, sg, 1, DMA_FROM_DEVICE, - DMA_PREP_INTERRUPT); + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + if (!desc) return 0; @@ -706,14 +761,14 @@ static unsigned int handle_tx(struct eg20t_port *priv) { struct uart_port *port = &priv->port; struct circ_buf *xmit = &port->state->xmit; - int ret; int fifo_size; int tx_size; int size; int tx_empty; if (!priv->start_tx) { - pr_info("%s:Tx isn't started. (%lu)\n", __func__, jiffies); + dev_info(priv->port.dev, "%s:Tx isn't started. (%lu)\n", + __func__, jiffies); pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT); priv->tx_empty = 1; return 0; @@ -728,17 +783,21 @@ static unsigned int handle_tx(struct eg20t_port *priv) fifo_size--; } size = min(xmit->head - xmit->tail, fifo_size); - tx_size = pop_tx(priv, xmit->buf, size); + if (size < 0) + size = fifo_size; + + tx_size = pop_tx(priv, size); if (tx_size > 0) { - ret = pch_uart_hal_write(priv, xmit->buf, tx_size); - port->icount.tx += ret; + port->icount.tx += tx_size; tx_empty = 0; } priv->tx_empty = tx_empty; - if (tx_empty) + if (tx_empty) { pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT); + uart_write_wakeup(port); + } return PCH_UART_HANDLED_TX_INT; } @@ -747,14 +806,28 @@ static unsigned int dma_handle_tx(struct eg20t_port *priv) { struct uart_port *port = &priv->port; struct circ_buf *xmit = &port->state->xmit; - struct scatterlist *sg = &priv->sg_tx; + struct scatterlist *sg; int nent; int fifo_size; int tx_empty; struct dma_async_tx_descriptor *desc; + int num; + int i; + int bytes; + int size; + int rem; if (!priv->start_tx) { - pr_info("%s:Tx isn't started. (%lu)\n", __func__, jiffies); + dev_info(priv->port.dev, "%s:Tx isn't started. (%lu)\n", + __func__, jiffies); + pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT); + priv->tx_empty = 1; + return 0; + } + + if (priv->tx_dma_use) { + dev_dbg(priv->port.dev, "%s:Tx is not completed. (%lu)\n", + __func__, jiffies); pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT); priv->tx_empty = 1; return 0; @@ -769,37 +842,73 @@ static unsigned int dma_handle_tx(struct eg20t_port *priv) fifo_size--; } - pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT); + bytes = min((int)CIRC_CNT(xmit->head, xmit->tail, + UART_XMIT_SIZE), CIRC_CNT_TO_END(xmit->head, + xmit->tail, UART_XMIT_SIZE)); + if (!bytes) { + dev_dbg(priv->port.dev, "%s 0 bytes return\n", __func__); + pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT); + uart_write_wakeup(port); + return 0; + } + + if (bytes > fifo_size) { + num = bytes / fifo_size + 1; + size = fifo_size; + rem = bytes % fifo_size; + } else { + num = 1; + size = bytes; + rem = bytes; + } + + dev_dbg(priv->port.dev, "%s num=%d size=%d rem=%d\n", + __func__, num, size, rem); priv->tx_dma_use = 1; - sg_init_table(&priv->sg_tx, 1); /* Initialize SG table */ + priv->sg_tx_p = kzalloc(sizeof(struct scatterlist)*num, GFP_ATOMIC); - sg_set_page(&priv->sg_tx, virt_to_page(xmit->buf), - UART_XMIT_SIZE, (int)xmit->buf & ~PAGE_MASK); + sg_init_table(priv->sg_tx_p, num); /* Initialize SG table */ + sg = priv->sg_tx_p; - nent = dma_map_sg(port->dev, &priv->sg_tx, 1, DMA_TO_DEVICE); + for (i = 0; i < num; i++, sg++) { + if (i == (num - 1)) + sg_set_page(sg, virt_to_page(xmit->buf), + rem, fifo_size * i); + else + sg_set_page(sg, virt_to_page(xmit->buf), + size, fifo_size * i); + } + + sg = priv->sg_tx_p; + nent = dma_map_sg(port->dev, sg, num, DMA_TO_DEVICE); if (!nent) { - pr_err("%s:dma_map_sg Failed\n", __func__); + dev_err(priv->port.dev, "%s:dma_map_sg Failed\n", __func__); return 0; } - - sg->offset = xmit->tail & (UART_XMIT_SIZE - 1); - sg_dma_address(sg) = (sg_dma_address(sg) & ~(UART_XMIT_SIZE - 1)) + - sg->offset; - sg_dma_len(sg) = min((int)CIRC_CNT(xmit->head, xmit->tail, - UART_XMIT_SIZE), CIRC_CNT_TO_END(xmit->head, - xmit->tail, UART_XMIT_SIZE)); + priv->nent = nent; + + for (i = 0; i < nent; i++, sg++) { + sg->offset = (xmit->tail & (UART_XMIT_SIZE - 1)) + + fifo_size * i; + sg_dma_address(sg) = (sg_dma_address(sg) & + ~(UART_XMIT_SIZE - 1)) + sg->offset; + if (i == (nent - 1)) + sg_dma_len(sg) = rem; + else + sg_dma_len(sg) = size; + } desc = priv->chan_tx->device->device_prep_slave_sg(priv->chan_tx, - sg, nent, DMA_TO_DEVICE, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + priv->sg_tx_p, nent, DMA_TO_DEVICE, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); if (!desc) { - pr_err("%s:device_prep_slave_sg Failed\n", __func__); + dev_err(priv->port.dev, "%s:device_prep_slave_sg Failed\n", + __func__); return 0; } - - dma_sync_sg_for_device(port->dev, sg, 1, DMA_TO_DEVICE); - + dma_sync_sg_for_device(port->dev, priv->sg_tx_p, nent, DMA_TO_DEVICE); priv->desc_tx = desc; desc->callback = pch_dma_tx_complete; desc->callback_param = priv; @@ -854,10 +963,16 @@ static irqreturn_t pch_uart_interrupt(int irq, void *dev_id) } break; case PCH_UART_IID_RDR: /* Received Data Ready */ - if (priv->use_dma) + if (priv->use_dma) { + pch_uart_hal_disable_interrupt(priv, + PCH_UART_HAL_RX_INT); ret = dma_handle_rx(priv); - else + if (!ret) + pch_uart_hal_enable_interrupt(priv, + PCH_UART_HAL_RX_INT); + } else { ret = handle_rx(priv); + } break; case PCH_UART_IID_RDR_TO: /* Received Data Ready (FIFO Timeout) */ @@ -874,7 +989,8 @@ static irqreturn_t pch_uart_interrupt(int irq, void *dev_id) ret = PCH_UART_HANDLED_MS_INT; break; default: /* Never junp to this label */ - pr_err("%s:iid=%d (%lu)\n", __func__, iid, jiffies); + dev_err(priv->port.dev, "%s:iid=%d (%lu)\n", __func__, + iid, jiffies); ret = -1; break; } @@ -932,7 +1048,6 @@ static unsigned int pch_uart_get_mctrl(struct uart_port *port) static void pch_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) { u32 mcr = 0; - unsigned int dat; struct eg20t_port *priv = container_of(port, struct eg20t_port, port); if (mctrl & TIOCM_DTR) @@ -942,11 +1057,11 @@ static void pch_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) if (mctrl & TIOCM_LOOP) mcr |= UART_MCR_LOOP; - if (mctrl) { - dat = pch_uart_get_mctrl(port); - dat |= mcr; - iowrite8(dat, priv->membase + UART_MCR); - } + if (priv->mcr & UART_MCR_AFE) + mcr |= UART_MCR_AFE; + + if (mctrl) + iowrite8(mcr, priv->membase + UART_MCR); } static void pch_uart_stop_tx(struct uart_port *port) @@ -963,9 +1078,13 @@ static void pch_uart_start_tx(struct uart_port *port) priv = container_of(port, struct eg20t_port, port); - if (priv->use_dma) - if (priv->tx_dma_use) + if (priv->use_dma) { + if (priv->tx_dma_use) { + dev_dbg(priv->port.dev, "%s : Tx DMA is NOT empty.\n", + __func__); return; + } + } priv->start_tx = 1; pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_TX_INT); @@ -1010,7 +1129,12 @@ static int pch_uart_startup(struct uart_port *port) priv = container_of(port, struct eg20t_port, port); priv->tx_empty = 1; - port->uartclk = priv->base_baud; + + if (port->uartclk) + priv->base_baud = port->uartclk; + else + port->uartclk = priv->base_baud; + pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_ALL_INT); ret = pch_uart_hal_set_line(priv, default_baud, PCH_UART_HAL_PARITY_NONE, PCH_UART_HAL_8BIT, @@ -1081,7 +1205,8 @@ static void pch_uart_shutdown(struct uart_port *port) ret = pch_uart_hal_set_fifo(priv, PCH_UART_HAL_DMA_MODE0, PCH_UART_HAL_FIFO_DIS, PCH_UART_HAL_TRIGGER1); if (ret) - pr_err("pch_uart_hal_set_fifo Failed(ret=%d)\n", ret); + dev_err(priv->port.dev, + "pch_uart_hal_set_fifo Failed(ret=%d)\n", ret); if (priv->use_dma_flag) pch_free_dma(port); @@ -1130,6 +1255,13 @@ static void pch_uart_set_termios(struct uart_port *port, } else { parity = PCH_UART_HAL_PARITY_NONE; } + + /* Only UART0 has auto hardware flow function */ + if ((termios->c_cflag & CRTSCTS) && (priv->fifo_size == 256)) + priv->mcr |= UART_MCR_AFE; + else + priv->mcr &= ~UART_MCR_AFE; + termios->c_cflag &= ~CMSPAR; /* Mark/Space parity is not supported */ baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16); @@ -1202,17 +1334,19 @@ static int pch_uart_verify_port(struct uart_port *port, priv = container_of(port, struct eg20t_port, port); if (serinfo->flags & UPF_LOW_LATENCY) { - pr_info("PCH UART : Use PIO Mode (without DMA)\n"); + dev_info(priv->port.dev, + "PCH UART : Use PIO Mode (without DMA)\n"); priv->use_dma = 0; serinfo->flags &= ~UPF_LOW_LATENCY; } else { #ifndef CONFIG_PCH_DMA - pr_err("%s : PCH DMA is not Loaded.\n", __func__); + dev_err(priv->port.dev, "%s : PCH DMA is not Loaded.\n", + __func__); return -EOPNOTSUPP; #endif priv->use_dma = 1; priv->use_dma_flag = 1; - pr_info("PCH UART : Use DMA Mode\n"); + dev_info(priv->port.dev, "PCH UART : Use DMA Mode\n"); } return 0; @@ -1249,7 +1383,7 @@ static struct uart_driver pch_uart_driver = { }; static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev, - int port_type) + const struct pci_device_id *id) { struct eg20t_port *priv; int ret; @@ -1257,7 +1391,11 @@ static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev, unsigned int mapbase; unsigned char *rxbuf; int fifosize, base_baud; - static int num; + int port_type; + struct pch_uart_driver_data *board; + + board = &drv_dat[id->driver_data]; + port_type = board->port_type; priv = kzalloc(sizeof(struct eg20t_port), GFP_KERNEL); if (priv == NULL) @@ -1267,14 +1405,18 @@ static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev, if (!rxbuf) goto init_port_free_txbuf; + base_baud = 1843200; /* 1.8432MHz */ + + /* quirk for CM-iTC board */ + if (strstr(dmi_get_system_info(DMI_BOARD_NAME), "CM-iTC")) + base_baud = 192000000; /* 192.0MHz */ + switch (port_type) { case PORT_UNKNOWN: - fifosize = 256; /* UART0 */ - base_baud = 1843200; /* 1.8432MHz */ + fifosize = 256; /* EG20T/ML7213: UART0 */ break; case PORT_8250: - fifosize = 64; /* UART1~3 */ - base_baud = 1843200; /* 1.8432MHz */ + fifosize = 64; /* EG20T:UART1~3 ML7213: UART1~2*/ break; default: dev_err(&pdev->dev, "Invalid Port Type(=%d)\n", port_type); @@ -1302,11 +1444,14 @@ static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev, priv->port.ops = &pch_uart_ops; priv->port.flags = UPF_BOOT_AUTOCONF; priv->port.fifosize = fifosize; - priv->port.line = num++; + priv->port.line = board->line_no; priv->trigger = PCH_UART_HAL_TRIGGER_M; + spin_lock_init(&priv->port.lock); + pci_set_drvdata(pdev, priv); pch_uart_hal_request(pdev, fifosize, base_baud); + ret = uart_add_one_port(&pch_uart_driver, &priv->port); if (ret < 0) goto init_port_hal_free; @@ -1377,13 +1522,19 @@ static int pch_uart_pci_resume(struct pci_dev *pdev) static DEFINE_PCI_DEVICE_TABLE(pch_uart_pci_id) = { {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8811), - .driver_data = PCH_UART_8LINE}, + .driver_data = pch_et20t_uart0}, {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8812), - .driver_data = PCH_UART_2LINE}, + .driver_data = pch_et20t_uart1}, {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8813), - .driver_data = PCH_UART_2LINE}, + .driver_data = pch_et20t_uart2}, {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8814), - .driver_data = PCH_UART_2LINE}, + .driver_data = pch_et20t_uart3}, + {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8027), + .driver_data = pch_ml7213_uart0}, + {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8028), + .driver_data = pch_ml7213_uart1}, + {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8029), + .driver_data = pch_ml7213_uart2}, {0,}, }; @@ -1397,7 +1548,7 @@ static int __devinit pch_uart_pci_probe(struct pci_dev *pdev, if (ret < 0) goto probe_error; - priv = pch_uart_init_port(pdev, id->driver_data); + priv = pch_uart_init_port(pdev, id); if (!priv) { ret = -EBUSY; goto probe_disable_device; diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index 460a72d..733fe8e 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -905,7 +905,7 @@ static int uart_get_lsr_info(struct tty_struct *tty, return put_user(result, value); } -static int uart_tiocmget(struct tty_struct *tty, struct file *file) +static int uart_tiocmget(struct tty_struct *tty) { struct uart_state *state = tty->driver_data; struct tty_port *port = &state->port; @@ -913,10 +913,8 @@ static int uart_tiocmget(struct tty_struct *tty, struct file *file) int result = -EIO; mutex_lock(&port->mutex); - if ((!file || !tty_hung_up_p(file)) && - !(tty->flags & (1 << TTY_IO_ERROR))) { + if (!(tty->flags & (1 << TTY_IO_ERROR))) { result = uport->mctrl; - spin_lock_irq(&uport->lock); result |= uport->ops->get_mctrl(uport); spin_unlock_irq(&uport->lock); @@ -927,8 +925,7 @@ static int uart_tiocmget(struct tty_struct *tty, struct file *file) } static int -uart_tiocmset(struct tty_struct *tty, struct file *file, - unsigned int set, unsigned int clear) +uart_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct uart_state *state = tty->driver_data; struct uart_port *uport = state->uart_port; @@ -936,8 +933,7 @@ uart_tiocmset(struct tty_struct *tty, struct file *file, int ret = -EIO; mutex_lock(&port->mutex); - if ((!file || !tty_hung_up_p(file)) && - !(tty->flags & (1 << TTY_IO_ERROR))) { + if (!(tty->flags & (1 << TTY_IO_ERROR))) { uart_update_mctrl(uport, set, clear); ret = 0; } @@ -1103,7 +1099,7 @@ static int uart_get_icount(struct tty_struct *tty, * Called via sys_ioctl. We can use spin_lock_irq() here. */ static int -uart_ioctl(struct tty_struct *tty, struct file *filp, unsigned int cmd, +uart_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct uart_state *state = tty->driver_data; @@ -1156,7 +1152,7 @@ uart_ioctl(struct tty_struct *tty, struct file *filp, unsigned int cmd, mutex_lock(&port->mutex); - if (tty_hung_up_p(filp)) { + if (tty->flags & (1 << TTY_IO_ERROR)) { ret = -EIO; goto out_up; } @@ -2064,7 +2060,7 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *uport) /* * Re-enable the console device after suspending. */ - if (console_suspend_enabled && uart_console(uport)) { + if (uart_console(uport)) { /* * First try to use the console cflag setting. */ @@ -2077,9 +2073,9 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *uport) if (port->tty && port->tty->termios && termios.c_cflag == 0) termios = *(port->tty->termios); - uart_change_pm(state, 0); uport->ops->set_termios(uport, &termios, NULL); - console_start(uport->cons); + if (console_suspend_enabled) + console_start(uport->cons); } if (port->flags & ASYNC_SUSPENDED) { diff --git a/drivers/tty/serial/serial_cs.c b/drivers/tty/serial/serial_cs.c index 93760b2..1ef4df9 100644 --- a/drivers/tty/serial/serial_cs.c +++ b/drivers/tty/serial/serial_cs.c @@ -712,6 +712,7 @@ static struct pcmcia_device_id serial_ids[] = { PCMCIA_PFC_DEVICE_PROD_ID12(1, "Xircom", "CreditCard Ethernet+Modem II", 0x2e3ee845, 0xeca401bf), PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0e01), PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0a05), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0b05), PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x1101), PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0104, 0x0070), PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0101, 0x0562), diff --git a/drivers/tty/serial/serial_lh7a40x.c b/drivers/tty/serial/serial_lh7a40x.c deleted file mode 100644 index ea74470..0000000 --- a/drivers/tty/serial/serial_lh7a40x.c +++ /dev/null @@ -1,682 +0,0 @@ -/* drivers/serial/serial_lh7a40x.c - * - * Copyright (C) 2004 Coastal Environmental Systems - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - */ - -/* Driver for Sharp LH7A40X embedded serial ports - * - * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. - * Based on drivers/serial/amba.c, by Deep Blue Solutions Ltd. - * - * --- - * - * This driver supports the embedded UARTs of the Sharp LH7A40X series - * CPUs. While similar to the 16550 and other UART chips, there is - * nothing close to register compatibility. Moreover, some of the - * modem control lines are not available, either in the chip or they - * are lacking in the board-level implementation. - * - * - Use of SIRDIS - * For simplicity, we disable the IR functions of any UART whenever - * we enable it. - * - */ - - -#if defined(CONFIG_SERIAL_LH7A40X_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) -#define SUPPORT_SYSRQ -#endif - -#include <linux/module.h> -#include <linux/ioport.h> -#include <linux/init.h> -#include <linux/console.h> -#include <linux/sysrq.h> -#include <linux/tty.h> -#include <linux/tty_flip.h> -#include <linux/serial_core.h> -#include <linux/serial.h> -#include <linux/io.h> - -#include <asm/irq.h> -#include <mach/hardware.h> - -#define DEV_MAJOR 204 -#define DEV_MINOR 16 -#define DEV_NR 3 - -#define ISR_LOOP_LIMIT 256 - -#define UR(p,o) _UR ((p)->membase, o) -#define _UR(b,o) (*((volatile unsigned int*)(((unsigned char*) b) + (o)))) -#define BIT_CLR(p,o,m) UR(p,o) = UR(p,o) & (~(unsigned int)m) -#define BIT_SET(p,o,m) UR(p,o) = UR(p,o) | ( (unsigned int)m) - -#define UART_REG_SIZE 32 - -#define UART_R_DATA (0x00) -#define UART_R_FCON (0x04) -#define UART_R_BRCON (0x08) -#define UART_R_CON (0x0c) -#define UART_R_STATUS (0x10) -#define UART_R_RAWISR (0x14) -#define UART_R_INTEN (0x18) -#define UART_R_ISR (0x1c) - -#define UARTEN (0x01) /* UART enable */ -#define SIRDIS (0x02) /* Serial IR disable (UART1 only) */ - -#define RxEmpty (0x10) -#define TxEmpty (0x80) -#define TxFull (0x20) -#define nRxRdy RxEmpty -#define nTxRdy TxFull -#define TxBusy (0x08) - -#define RxBreak (0x0800) -#define RxOverrunError (0x0400) -#define RxParityError (0x0200) -#define RxFramingError (0x0100) -#define RxError (RxBreak | RxOverrunError | RxParityError | RxFramingError) - -#define DCD (0x04) -#define DSR (0x02) -#define CTS (0x01) - -#define RxInt (0x01) -#define TxInt (0x02) -#define ModemInt (0x04) -#define RxTimeoutInt (0x08) - -#define MSEOI (0x10) - -#define WLEN_8 (0x60) -#define WLEN_7 (0x40) -#define WLEN_6 (0x20) -#define WLEN_5 (0x00) -#define WLEN (0x60) /* Mask for all word-length bits */ -#define STP2 (0x08) -#define PEN (0x02) /* Parity Enable */ -#define EPS (0x04) /* Even Parity Set */ -#define FEN (0x10) /* FIFO Enable */ -#define BRK (0x01) /* Send Break */ - - -struct uart_port_lh7a40x { - struct uart_port port; - unsigned int statusPrev; /* Most recently read modem status */ -}; - -static void lh7a40xuart_stop_tx (struct uart_port* port) -{ - BIT_CLR (port, UART_R_INTEN, TxInt); -} - -static void lh7a40xuart_start_tx (struct uart_port* port) -{ - BIT_SET (port, UART_R_INTEN, TxInt); - - /* *** FIXME: do I need to check for startup of the - transmitter? The old driver did, but AMBA - doesn't . */ -} - -static void lh7a40xuart_stop_rx (struct uart_port* port) -{ - BIT_SET (port, UART_R_INTEN, RxTimeoutInt | RxInt); -} - -static void lh7a40xuart_enable_ms (struct uart_port* port) -{ - BIT_SET (port, UART_R_INTEN, ModemInt); -} - -static void lh7a40xuart_rx_chars (struct uart_port* port) -{ - struct tty_struct* tty = port->state->port.tty; - int cbRxMax = 256; /* (Gross) limit on receive */ - unsigned int data; /* Received data and status */ - unsigned int flag; - - while (!(UR (port, UART_R_STATUS) & nRxRdy) && --cbRxMax) { - data = UR (port, UART_R_DATA); - flag = TTY_NORMAL; - ++port->icount.rx; - - if (unlikely(data & RxError)) { - if (data & RxBreak) { - data &= ~(RxFramingError | RxParityError); - ++port->icount.brk; - if (uart_handle_break (port)) - continue; - } - else if (data & RxParityError) - ++port->icount.parity; - else if (data & RxFramingError) - ++port->icount.frame; - if (data & RxOverrunError) - ++port->icount.overrun; - - /* Mask by termios, leave Rx'd byte */ - data &= port->read_status_mask | 0xff; - - if (data & RxBreak) - flag = TTY_BREAK; - else if (data & RxParityError) - flag = TTY_PARITY; - else if (data & RxFramingError) - flag = TTY_FRAME; - } - - if (uart_handle_sysrq_char (port, (unsigned char) data)) - continue; - - uart_insert_char(port, data, RxOverrunError, data, flag); - } - tty_flip_buffer_push (tty); - return; -} - -static void lh7a40xuart_tx_chars (struct uart_port* port) -{ - struct circ_buf* xmit = &port->state->xmit; - int cbTxMax = port->fifosize; - - if (port->x_char) { - UR (port, UART_R_DATA) = port->x_char; - ++port->icount.tx; - port->x_char = 0; - return; - } - if (uart_circ_empty (xmit) || uart_tx_stopped (port)) { - lh7a40xuart_stop_tx (port); - return; - } - - /* Unlike the AMBA UART, the lh7a40x UART does not guarantee - that at least half of the FIFO is empty. Instead, we check - status for every character. Using the AMBA method causes - the transmitter to drop characters. */ - - do { - UR (port, UART_R_DATA) = xmit->buf[xmit->tail]; - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - ++port->icount.tx; - if (uart_circ_empty(xmit)) - break; - } while (!(UR (port, UART_R_STATUS) & nTxRdy) - && cbTxMax--); - - if (uart_circ_chars_pending (xmit) < WAKEUP_CHARS) - uart_write_wakeup (port); - - if (uart_circ_empty (xmit)) - lh7a40xuart_stop_tx (port); -} - -static void lh7a40xuart_modem_status (struct uart_port* port) -{ - unsigned int status = UR (port, UART_R_STATUS); - unsigned int delta - = status ^ ((struct uart_port_lh7a40x*) port)->statusPrev; - - BIT_SET (port, UART_R_RAWISR, MSEOI); /* Clear modem status intr */ - - if (!delta) /* Only happens if we missed 2 transitions */ - return; - - ((struct uart_port_lh7a40x*) port)->statusPrev = status; - - if (delta & DCD) - uart_handle_dcd_change (port, status & DCD); - - if (delta & DSR) - ++port->icount.dsr; - - if (delta & CTS) - uart_handle_cts_change (port, status & CTS); - - wake_up_interruptible (&port->state->port.delta_msr_wait); -} - -static irqreturn_t lh7a40xuart_int (int irq, void* dev_id) -{ - struct uart_port* port = dev_id; - unsigned int cLoopLimit = ISR_LOOP_LIMIT; - unsigned int isr = UR (port, UART_R_ISR); - - - do { - if (isr & (RxInt | RxTimeoutInt)) - lh7a40xuart_rx_chars(port); - if (isr & ModemInt) - lh7a40xuart_modem_status (port); - if (isr & TxInt) - lh7a40xuart_tx_chars (port); - - if (--cLoopLimit == 0) - break; - - isr = UR (port, UART_R_ISR); - } while (isr & (RxInt | TxInt | RxTimeoutInt)); - - return IRQ_HANDLED; -} - -static unsigned int lh7a40xuart_tx_empty (struct uart_port* port) -{ - return (UR (port, UART_R_STATUS) & TxEmpty) ? TIOCSER_TEMT : 0; -} - -static unsigned int lh7a40xuart_get_mctrl (struct uart_port* port) -{ - unsigned int result = 0; - unsigned int status = UR (port, UART_R_STATUS); - - if (status & DCD) - result |= TIOCM_CAR; - if (status & DSR) - result |= TIOCM_DSR; - if (status & CTS) - result |= TIOCM_CTS; - - return result; -} - -static void lh7a40xuart_set_mctrl (struct uart_port* port, unsigned int mctrl) -{ - /* None of the ports supports DTR. UART1 supports RTS through GPIO. */ - /* Note, kernel appears to be setting DTR and RTS on console. */ - - /* *** FIXME: this deserves more work. There's some work in - tracing all of the IO pins. */ -#if 0 - if( port->mapbase == UART1_PHYS) { - gpioRegs_t *gpio = (gpioRegs_t *)IO_ADDRESS(GPIO_PHYS); - - if (mctrl & TIOCM_RTS) - gpio->pbdr &= ~GPIOB_UART1_RTS; - else - gpio->pbdr |= GPIOB_UART1_RTS; - } -#endif -} - -static void lh7a40xuart_break_ctl (struct uart_port* port, int break_state) -{ - unsigned long flags; - - spin_lock_irqsave(&port->lock, flags); - if (break_state == -1) - BIT_SET (port, UART_R_FCON, BRK); /* Assert break */ - else - BIT_CLR (port, UART_R_FCON, BRK); /* Deassert break */ - spin_unlock_irqrestore(&port->lock, flags); -} - -static int lh7a40xuart_startup (struct uart_port* port) -{ - int retval; - - retval = request_irq (port->irq, lh7a40xuart_int, 0, - "serial_lh7a40x", port); - if (retval) - return retval; - - /* Initial modem control-line settings */ - ((struct uart_port_lh7a40x*) port)->statusPrev - = UR (port, UART_R_STATUS); - - /* There is presently no configuration option to enable IR. - Thus, we always disable it. */ - - BIT_SET (port, UART_R_CON, UARTEN | SIRDIS); - BIT_SET (port, UART_R_INTEN, RxTimeoutInt | RxInt); - - return 0; -} - -static void lh7a40xuart_shutdown (struct uart_port* port) -{ - free_irq (port->irq, port); - BIT_CLR (port, UART_R_FCON, BRK | FEN); - BIT_CLR (port, UART_R_CON, UARTEN); -} - -static void lh7a40xuart_set_termios (struct uart_port* port, - struct ktermios* termios, - struct ktermios* old) -{ - unsigned int con; - unsigned int inten; - unsigned int fcon; - unsigned long flags; - unsigned int baud; - unsigned int quot; - - baud = uart_get_baud_rate (port, termios, old, 8, port->uartclk/16); - quot = uart_get_divisor (port, baud); /* -1 performed elsewhere */ - - switch (termios->c_cflag & CSIZE) { - case CS5: - fcon = WLEN_5; - break; - case CS6: - fcon = WLEN_6; - break; - case CS7: - fcon = WLEN_7; - break; - case CS8: - default: - fcon = WLEN_8; - break; - } - if (termios->c_cflag & CSTOPB) - fcon |= STP2; - if (termios->c_cflag & PARENB) { - fcon |= PEN; - if (!(termios->c_cflag & PARODD)) - fcon |= EPS; - } - if (port->fifosize > 1) - fcon |= FEN; - - spin_lock_irqsave (&port->lock, flags); - - uart_update_timeout (port, termios->c_cflag, baud); - - port->read_status_mask = RxOverrunError; - if (termios->c_iflag & INPCK) - port->read_status_mask |= RxFramingError | RxParityError; - if (termios->c_iflag & (BRKINT | PARMRK)) - port->read_status_mask |= RxBreak; - - /* Figure mask for status we ignore */ - port->ignore_status_mask = 0; - if (termios->c_iflag & IGNPAR) - port->ignore_status_mask |= RxFramingError | RxParityError; - if (termios->c_iflag & IGNBRK) { - port->ignore_status_mask |= RxBreak; - /* Ignore overrun when ignorning parity */ - /* *** FIXME: is this in the right place? */ - if (termios->c_iflag & IGNPAR) - port->ignore_status_mask |= RxOverrunError; - } - - /* Ignore all receive errors when receive disabled */ - if ((termios->c_cflag & CREAD) == 0) - port->ignore_status_mask |= RxError; - - con = UR (port, UART_R_CON); - inten = (UR (port, UART_R_INTEN) & ~ModemInt); - - if (UART_ENABLE_MS (port, termios->c_cflag)) - inten |= ModemInt; - - BIT_CLR (port, UART_R_CON, UARTEN); /* Disable UART */ - UR (port, UART_R_INTEN) = 0; /* Disable interrupts */ - UR (port, UART_R_BRCON) = quot - 1; /* Set baud rate divisor */ - UR (port, UART_R_FCON) = fcon; /* Set FIFO and frame ctrl */ - UR (port, UART_R_INTEN) = inten; /* Enable interrupts */ - UR (port, UART_R_CON) = con; /* Restore UART mode */ - - spin_unlock_irqrestore(&port->lock, flags); -} - -static const char* lh7a40xuart_type (struct uart_port* port) -{ - return port->type == PORT_LH7A40X ? "LH7A40X" : NULL; -} - -static void lh7a40xuart_release_port (struct uart_port* port) -{ - release_mem_region (port->mapbase, UART_REG_SIZE); -} - -static int lh7a40xuart_request_port (struct uart_port* port) -{ - return request_mem_region (port->mapbase, UART_REG_SIZE, - "serial_lh7a40x") != NULL - ? 0 : -EBUSY; -} - -static void lh7a40xuart_config_port (struct uart_port* port, int flags) -{ - if (flags & UART_CONFIG_TYPE) { - port->type = PORT_LH7A40X; - lh7a40xuart_request_port (port); - } -} - -static int lh7a40xuart_verify_port (struct uart_port* port, - struct serial_struct* ser) -{ - int ret = 0; - - if (ser->type != PORT_UNKNOWN && ser->type != PORT_LH7A40X) - ret = -EINVAL; - if (ser->irq < 0 || ser->irq >= nr_irqs) - ret = -EINVAL; - if (ser->baud_base < 9600) /* *** FIXME: is this true? */ - ret = -EINVAL; - return ret; -} - -static struct uart_ops lh7a40x_uart_ops = { - .tx_empty = lh7a40xuart_tx_empty, - .set_mctrl = lh7a40xuart_set_mctrl, - .get_mctrl = lh7a40xuart_get_mctrl, - .stop_tx = lh7a40xuart_stop_tx, - .start_tx = lh7a40xuart_start_tx, - .stop_rx = lh7a40xuart_stop_rx, - .enable_ms = lh7a40xuart_enable_ms, - .break_ctl = lh7a40xuart_break_ctl, - .startup = lh7a40xuart_startup, - .shutdown = lh7a40xuart_shutdown, - .set_termios = lh7a40xuart_set_termios, - .type = lh7a40xuart_type, - .release_port = lh7a40xuart_release_port, - .request_port = lh7a40xuart_request_port, - .config_port = lh7a40xuart_config_port, - .verify_port = lh7a40xuart_verify_port, -}; - -static struct uart_port_lh7a40x lh7a40x_ports[DEV_NR] = { - { - .port = { - .membase = (void*) io_p2v (UART1_PHYS), - .mapbase = UART1_PHYS, - .iotype = UPIO_MEM, - .irq = IRQ_UART1INTR, - .uartclk = 14745600/2, - .fifosize = 16, - .ops = &lh7a40x_uart_ops, - .flags = UPF_BOOT_AUTOCONF, - .line = 0, - }, - }, - { - .port = { - .membase = (void*) io_p2v (UART2_PHYS), - .mapbase = UART2_PHYS, - .iotype = UPIO_MEM, - .irq = IRQ_UART2INTR, - .uartclk = 14745600/2, - .fifosize = 16, - .ops = &lh7a40x_uart_ops, - .flags = UPF_BOOT_AUTOCONF, - .line = 1, - }, - }, - { - .port = { - .membase = (void*) io_p2v (UART3_PHYS), - .mapbase = UART3_PHYS, - .iotype = UPIO_MEM, - .irq = IRQ_UART3INTR, - .uartclk = 14745600/2, - .fifosize = 16, - .ops = &lh7a40x_uart_ops, - .flags = UPF_BOOT_AUTOCONF, - .line = 2, - }, - }, -}; - -#ifndef CONFIG_SERIAL_LH7A40X_CONSOLE -# define LH7A40X_CONSOLE NULL -#else -# define LH7A40X_CONSOLE &lh7a40x_console - -static void lh7a40xuart_console_putchar(struct uart_port *port, int ch) -{ - while (UR(port, UART_R_STATUS) & nTxRdy) - ; - UR(port, UART_R_DATA) = ch; -} - -static void lh7a40xuart_console_write (struct console* co, - const char* s, - unsigned int count) -{ - struct uart_port* port = &lh7a40x_ports[co->index].port; - unsigned int con = UR (port, UART_R_CON); - unsigned int inten = UR (port, UART_R_INTEN); - - - UR (port, UART_R_INTEN) = 0; /* Disable all interrupts */ - BIT_SET (port, UART_R_CON, UARTEN | SIRDIS); /* Enable UART */ - - uart_console_write(port, s, count, lh7a40xuart_console_putchar); - - /* Wait until all characters are sent */ - while (UR (port, UART_R_STATUS) & TxBusy) - ; - - /* Restore control and interrupt mask */ - UR (port, UART_R_CON) = con; - UR (port, UART_R_INTEN) = inten; -} - -static void __init lh7a40xuart_console_get_options (struct uart_port* port, - int* baud, - int* parity, - int* bits) -{ - if (UR (port, UART_R_CON) & UARTEN) { - unsigned int fcon = UR (port, UART_R_FCON); - unsigned int quot = UR (port, UART_R_BRCON) + 1; - - switch (fcon & (PEN | EPS)) { - default: *parity = 'n'; break; - case PEN: *parity = 'o'; break; - case PEN | EPS: *parity = 'e'; break; - } - - switch (fcon & WLEN) { - default: - case WLEN_8: *bits = 8; break; - case WLEN_7: *bits = 7; break; - case WLEN_6: *bits = 6; break; - case WLEN_5: *bits = 5; break; - } - - *baud = port->uartclk/(16*quot); - } -} - -static int __init lh7a40xuart_console_setup (struct console* co, char* options) -{ - struct uart_port* port; - int baud = 38400; - int bits = 8; - int parity = 'n'; - int flow = 'n'; - - if (co->index >= DEV_NR) /* Bounds check on device number */ - co->index = 0; - port = &lh7a40x_ports[co->index].port; - - if (options) - uart_parse_options (options, &baud, &parity, &bits, &flow); - else - lh7a40xuart_console_get_options (port, &baud, &parity, &bits); - - return uart_set_options (port, co, baud, parity, bits, flow); -} - -static struct uart_driver lh7a40x_reg; -static struct console lh7a40x_console = { - .name = "ttyAM", - .write = lh7a40xuart_console_write, - .device = uart_console_device, - .setup = lh7a40xuart_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &lh7a40x_reg, -}; - -static int __init lh7a40xuart_console_init(void) -{ - register_console (&lh7a40x_console); - return 0; -} - -console_initcall (lh7a40xuart_console_init); - -#endif - -static struct uart_driver lh7a40x_reg = { - .owner = THIS_MODULE, - .driver_name = "ttyAM", - .dev_name = "ttyAM", - .major = DEV_MAJOR, - .minor = DEV_MINOR, - .nr = DEV_NR, - .cons = LH7A40X_CONSOLE, -}; - -static int __init lh7a40xuart_init(void) -{ - int ret; - - printk (KERN_INFO "serial: LH7A40X serial driver\n"); - - ret = uart_register_driver (&lh7a40x_reg); - - if (ret == 0) { - int i; - - for (i = 0; i < DEV_NR; i++) { - /* UART3, when used, requires GPIO pin reallocation */ - if (lh7a40x_ports[i].port.mapbase == UART3_PHYS) - GPIO_PINMUX |= 1<<3; - uart_add_one_port (&lh7a40x_reg, - &lh7a40x_ports[i].port); - } - } - return ret; -} - -static void __exit lh7a40xuart_exit(void) -{ - int i; - - for (i = 0; i < DEV_NR; i++) - uart_remove_one_port (&lh7a40x_reg, &lh7a40x_ports[i].port); - - uart_unregister_driver (&lh7a40x_reg); -} - -module_init (lh7a40xuart_init); -module_exit (lh7a40xuart_exit); - -MODULE_AUTHOR ("Marc Singer"); -MODULE_DESCRIPTION ("Sharp LH7A40X serial port driver"); -MODULE_LICENSE ("GPL"); diff --git a/drivers/tty/serial/sunhv.c b/drivers/tty/serial/sunhv.c index c901486..c0b7246 100644 --- a/drivers/tty/serial/sunhv.c +++ b/drivers/tty/serial/sunhv.c @@ -519,7 +519,7 @@ static struct console sunhv_console = { .data = &sunhv_reg, }; -static int __devinit hv_probe(struct platform_device *op, const struct of_device_id *match) +static int __devinit hv_probe(struct platform_device *op) { struct uart_port *port; unsigned long minor; @@ -629,7 +629,7 @@ static const struct of_device_id hv_match[] = { }; MODULE_DEVICE_TABLE(of, hv_match); -static struct of_platform_driver hv_driver = { +static struct platform_driver hv_driver = { .driver = { .name = "hv", .owner = THIS_MODULE, @@ -644,12 +644,12 @@ static int __init sunhv_init(void) if (tlb_type != hypervisor) return -ENODEV; - return of_register_platform_driver(&hv_driver); + return platform_driver_register(&hv_driver); } static void __exit sunhv_exit(void) { - of_unregister_platform_driver(&hv_driver); + platform_driver_unregister(&hv_driver); } module_init(sunhv_init); diff --git a/drivers/tty/serial/sunsab.c b/drivers/tty/serial/sunsab.c index 5b246b1..b5fa2a5 100644 --- a/drivers/tty/serial/sunsab.c +++ b/drivers/tty/serial/sunsab.c @@ -1006,7 +1006,7 @@ static int __devinit sunsab_init_one(struct uart_sunsab_port *up, return 0; } -static int __devinit sab_probe(struct platform_device *op, const struct of_device_id *match) +static int __devinit sab_probe(struct platform_device *op) { static int inst; struct uart_sunsab_port *up; @@ -1092,7 +1092,7 @@ static const struct of_device_id sab_match[] = { }; MODULE_DEVICE_TABLE(of, sab_match); -static struct of_platform_driver sab_driver = { +static struct platform_driver sab_driver = { .driver = { .name = "sab", .owner = THIS_MODULE, @@ -1130,12 +1130,12 @@ static int __init sunsab_init(void) } } - return of_register_platform_driver(&sab_driver); + return platform_driver_register(&sab_driver); } static void __exit sunsab_exit(void) { - of_unregister_platform_driver(&sab_driver); + platform_driver_unregister(&sab_driver); if (sunsab_reg.nr) { sunserial_unregister_minors(&sunsab_reg, sunsab_reg.nr); } diff --git a/drivers/tty/serial/sunsu.c b/drivers/tty/serial/sunsu.c index 551ebfe..92aa545 100644 --- a/drivers/tty/serial/sunsu.c +++ b/drivers/tty/serial/sunsu.c @@ -1406,7 +1406,7 @@ static enum su_type __devinit su_get_type(struct device_node *dp) return SU_PORT_PORT; } -static int __devinit su_probe(struct platform_device *op, const struct of_device_id *match) +static int __devinit su_probe(struct platform_device *op) { static int inst; struct device_node *dp = op->dev.of_node; @@ -1543,7 +1543,7 @@ static const struct of_device_id su_match[] = { }; MODULE_DEVICE_TABLE(of, su_match); -static struct of_platform_driver su_driver = { +static struct platform_driver su_driver = { .driver = { .name = "su", .owner = THIS_MODULE, @@ -1586,7 +1586,7 @@ static int __init sunsu_init(void) return err; } - err = of_register_platform_driver(&su_driver); + err = platform_driver_register(&su_driver); if (err && num_uart) sunserial_unregister_minors(&sunsu_reg, num_uart); diff --git a/drivers/tty/serial/sunzilog.c b/drivers/tty/serial/sunzilog.c index c1967ac..99ff9ab 100644 --- a/drivers/tty/serial/sunzilog.c +++ b/drivers/tty/serial/sunzilog.c @@ -1399,7 +1399,7 @@ static void __devinit sunzilog_init_hw(struct uart_sunzilog_port *up) static int zilog_irq = -1; -static int __devinit zs_probe(struct platform_device *op, const struct of_device_id *match) +static int __devinit zs_probe(struct platform_device *op) { static int kbm_inst, uart_inst; int inst; @@ -1540,7 +1540,7 @@ static const struct of_device_id zs_match[] = { }; MODULE_DEVICE_TABLE(of, zs_match); -static struct of_platform_driver zs_driver = { +static struct platform_driver zs_driver = { .driver = { .name = "zs", .owner = THIS_MODULE, @@ -1576,7 +1576,7 @@ static int __init sunzilog_init(void) goto out_free_tables; } - err = of_register_platform_driver(&zs_driver); + err = platform_driver_register(&zs_driver); if (err) goto out_unregister_uart; @@ -1604,7 +1604,7 @@ out: return err; out_unregister_driver: - of_unregister_platform_driver(&zs_driver); + platform_driver_unregister(&zs_driver); out_unregister_uart: if (num_sunzilog) { @@ -1619,7 +1619,7 @@ out_free_tables: static void __exit sunzilog_exit(void) { - of_unregister_platform_driver(&zs_driver); + platform_driver_unregister(&zs_driver); if (zilog_irq != -1) { struct uart_sunzilog_port *up = sunzilog_irq_chain; diff --git a/drivers/tty/serial/uartlite.c b/drivers/tty/serial/uartlite.c index d2fce86..8af1ed8 100644 --- a/drivers/tty/serial/uartlite.c +++ b/drivers/tty/serial/uartlite.c @@ -19,22 +19,11 @@ #include <linux/interrupt.h> #include <linux/init.h> #include <asm/io.h> -#if defined(CONFIG_OF) && (defined(CONFIG_PPC32) || defined(CONFIG_MICROBLAZE)) #include <linux/of.h> #include <linux/of_address.h> #include <linux/of_device.h> #include <linux/of_platform.h> -/* Match table for of_platform binding */ -static struct of_device_id ulite_of_match[] __devinitdata = { - { .compatible = "xlnx,opb-uartlite-1.00.b", }, - { .compatible = "xlnx,xps-uartlite-1.00.a", }, - {} -}; -MODULE_DEVICE_TABLE(of, ulite_of_match); - -#endif - #define ULITE_NAME "ttyUL" #define ULITE_MAJOR 204 #define ULITE_MINOR 187 @@ -571,9 +560,29 @@ static int __devexit ulite_release(struct device *dev) * Platform bus binding */ +#if defined(CONFIG_OF) +/* Match table for of_platform binding */ +static struct of_device_id ulite_of_match[] __devinitdata = { + { .compatible = "xlnx,opb-uartlite-1.00.b", }, + { .compatible = "xlnx,xps-uartlite-1.00.a", }, + {} +}; +MODULE_DEVICE_TABLE(of, ulite_of_match); +#else /* CONFIG_OF */ +#define ulite_of_match NULL +#endif /* CONFIG_OF */ + static int __devinit ulite_probe(struct platform_device *pdev) { struct resource *res, *res2; + int id = pdev->id; +#ifdef CONFIG_OF + const __be32 *prop; + + prop = of_get_property(pdev->dev.of_node, "port-number", NULL); + if (prop) + id = be32_to_cpup(prop); +#endif res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) @@ -583,7 +592,7 @@ static int __devinit ulite_probe(struct platform_device *pdev) if (!res2) return -ENODEV; - return ulite_assign(&pdev->dev, pdev->id, res->start, res2->start); + return ulite_assign(&pdev->dev, id, res->start, res2->start); } static int __devexit ulite_remove(struct platform_device *pdev) @@ -595,72 +604,15 @@ static int __devexit ulite_remove(struct platform_device *pdev) MODULE_ALIAS("platform:uartlite"); static struct platform_driver ulite_platform_driver = { - .probe = ulite_probe, - .remove = __devexit_p(ulite_remove), - .driver = { - .owner = THIS_MODULE, - .name = "uartlite", - }, -}; - -/* --------------------------------------------------------------------- - * OF bus bindings - */ -#if defined(CONFIG_OF) && (defined(CONFIG_PPC32) || defined(CONFIG_MICROBLAZE)) -static int __devinit -ulite_of_probe(struct platform_device *op, const struct of_device_id *match) -{ - struct resource res; - const unsigned int *id; - int irq, rc; - - dev_dbg(&op->dev, "%s(%p, %p)\n", __func__, op, match); - - rc = of_address_to_resource(op->dev.of_node, 0, &res); - if (rc) { - dev_err(&op->dev, "invalid address\n"); - return rc; - } - - irq = irq_of_parse_and_map(op->dev.of_node, 0); - - id = of_get_property(op->dev.of_node, "port-number", NULL); - - return ulite_assign(&op->dev, id ? *id : -1, res.start, irq); -} - -static int __devexit ulite_of_remove(struct platform_device *op) -{ - return ulite_release(&op->dev); -} - -static struct of_platform_driver ulite_of_driver = { - .probe = ulite_of_probe, - .remove = __devexit_p(ulite_of_remove), + .probe = ulite_probe, + .remove = __devexit_p(ulite_remove), .driver = { - .name = "uartlite", .owner = THIS_MODULE, + .name = "uartlite", .of_match_table = ulite_of_match, }, }; -/* Registration helpers to keep the number of #ifdefs to a minimum */ -static inline int __init ulite_of_register(void) -{ - pr_debug("uartlite: calling of_register_platform_driver()\n"); - return of_register_platform_driver(&ulite_of_driver); -} - -static inline void __exit ulite_of_unregister(void) -{ - of_unregister_platform_driver(&ulite_of_driver); -} -#else /* CONFIG_OF && (CONFIG_PPC32 || CONFIG_MICROBLAZE) */ -/* Appropriate config not enabled; do nothing helpers */ -static inline int __init ulite_of_register(void) { return 0; } -static inline void __exit ulite_of_unregister(void) { } -#endif /* CONFIG_OF && (CONFIG_PPC32 || CONFIG_MICROBLAZE) */ - /* --------------------------------------------------------------------- * Module setup/teardown */ @@ -674,10 +626,6 @@ int __init ulite_init(void) if (ret) goto err_uart; - ret = ulite_of_register(); - if (ret) - goto err_of; - pr_debug("uartlite: calling platform_driver_register()\n"); ret = platform_driver_register(&ulite_platform_driver); if (ret) @@ -686,8 +634,6 @@ int __init ulite_init(void) return 0; err_plat: - ulite_of_unregister(); -err_of: uart_unregister_driver(&ulite_uart_driver); err_uart: printk(KERN_ERR "registering uartlite driver failed: err=%i", ret); @@ -697,7 +643,6 @@ err_uart: void __exit ulite_exit(void) { platform_driver_unregister(&ulite_platform_driver); - ulite_of_unregister(); uart_unregister_driver(&ulite_uart_driver); } diff --git a/drivers/tty/serial/ucc_uart.c b/drivers/tty/serial/ucc_uart.c index 3f4848e..ff51dae 100644 --- a/drivers/tty/serial/ucc_uart.c +++ b/drivers/tty/serial/ucc_uart.c @@ -1194,8 +1194,7 @@ static void uart_firmware_cont(const struct firmware *fw, void *context) release_firmware(fw); } -static int ucc_uart_probe(struct platform_device *ofdev, - const struct of_device_id *match) +static int ucc_uart_probe(struct platform_device *ofdev) { struct device_node *np = ofdev->dev.of_node; const unsigned int *iprop; /* Integer OF properties */ @@ -1485,7 +1484,7 @@ static struct of_device_id ucc_uart_match[] = { }; MODULE_DEVICE_TABLE(of, ucc_uart_match); -static struct of_platform_driver ucc_uart_of_driver = { +static struct platform_driver ucc_uart_of_driver = { .driver = { .name = "ucc_uart", .owner = THIS_MODULE, @@ -1510,7 +1509,7 @@ static int __init ucc_uart_init(void) return ret; } - ret = of_register_platform_driver(&ucc_uart_of_driver); + ret = platform_driver_register(&ucc_uart_of_driver); if (ret) printk(KERN_ERR "ucc-uart: could not register platform driver\n"); @@ -1523,7 +1522,7 @@ static void __exit ucc_uart_exit(void) printk(KERN_INFO "Freescale QUICC Engine UART device driver unloading\n"); - of_unregister_platform_driver(&ucc_uart_of_driver); + platform_driver_unregister(&ucc_uart_of_driver); uart_unregister_driver(&ucc_uart_driver); } |