diff options
Diffstat (limited to 'drivers')
97 files changed, 693 insertions, 570 deletions
diff --git a/drivers/atm/fore200e.c b/drivers/atm/fore200e.c index 14f6a62..05983a3 100644 --- a/drivers/atm/fore200e.c +++ b/drivers/atm/fore200e.c @@ -555,7 +555,7 @@ fore200e_pca_reset(struct fore200e* fore200e) } -static int __init +static int __devinit fore200e_pca_map(struct fore200e* fore200e) { DPRINTK(2, "device %s being mapped in memory\n", fore200e->name); @@ -589,7 +589,7 @@ fore200e_pca_unmap(struct fore200e* fore200e) } -static int __init +static int __devinit fore200e_pca_configure(struct fore200e* fore200e) { struct pci_dev* pci_dev = (struct pci_dev*)fore200e->bus_dev; @@ -2125,7 +2125,7 @@ fore200e_change_qos(struct atm_vcc* vcc,struct atm_qos* qos, int flags) } -static int __init +static int __devinit fore200e_irq_request(struct fore200e* fore200e) { if (request_irq(fore200e->irq, fore200e_interrupt, SA_SHIRQ, fore200e->name, fore200e->atm_dev) < 0) { @@ -2148,7 +2148,7 @@ fore200e_irq_request(struct fore200e* fore200e) } -static int __init +static int __devinit fore200e_get_esi(struct fore200e* fore200e) { struct prom_data* prom = fore200e_kmalloc(sizeof(struct prom_data), GFP_KERNEL | GFP_DMA); @@ -2180,7 +2180,7 @@ fore200e_get_esi(struct fore200e* fore200e) } -static int __init +static int __devinit fore200e_alloc_rx_buf(struct fore200e* fore200e) { int scheme, magn, nbr, size, i; @@ -2245,7 +2245,7 @@ fore200e_alloc_rx_buf(struct fore200e* fore200e) } -static int __init +static int __devinit fore200e_init_bs_queue(struct fore200e* fore200e) { int scheme, magn, i; @@ -2308,7 +2308,7 @@ fore200e_init_bs_queue(struct fore200e* fore200e) } -static int __init +static int __devinit fore200e_init_rx_queue(struct fore200e* fore200e) { struct host_rxq* rxq = &fore200e->host_rxq; @@ -2368,7 +2368,7 @@ fore200e_init_rx_queue(struct fore200e* fore200e) } -static int __init +static int __devinit fore200e_init_tx_queue(struct fore200e* fore200e) { struct host_txq* txq = &fore200e->host_txq; @@ -2431,7 +2431,7 @@ fore200e_init_tx_queue(struct fore200e* fore200e) } -static int __init +static int __devinit fore200e_init_cmd_queue(struct fore200e* fore200e) { struct host_cmdq* cmdq = &fore200e->host_cmdq; @@ -2487,7 +2487,7 @@ fore200e_param_bs_queue(struct fore200e* fore200e, } -static int __init +static int __devinit fore200e_initialize(struct fore200e* fore200e) { struct cp_queues __iomem * cpq; @@ -2539,7 +2539,7 @@ fore200e_initialize(struct fore200e* fore200e) } -static void __init +static void __devinit fore200e_monitor_putc(struct fore200e* fore200e, char c) { struct cp_monitor __iomem * monitor = fore200e->cp_monitor; @@ -2551,7 +2551,7 @@ fore200e_monitor_putc(struct fore200e* fore200e, char c) } -static int __init +static int __devinit fore200e_monitor_getc(struct fore200e* fore200e) { struct cp_monitor __iomem * monitor = fore200e->cp_monitor; @@ -2576,7 +2576,7 @@ fore200e_monitor_getc(struct fore200e* fore200e) } -static void __init +static void __devinit fore200e_monitor_puts(struct fore200e* fore200e, char* str) { while (*str) { @@ -2591,7 +2591,7 @@ fore200e_monitor_puts(struct fore200e* fore200e, char* str) } -static int __init +static int __devinit fore200e_start_fw(struct fore200e* fore200e) { int ok; @@ -2622,7 +2622,7 @@ fore200e_start_fw(struct fore200e* fore200e) } -static int __init +static int __devinit fore200e_load_fw(struct fore200e* fore200e) { u32* fw_data = (u32*) fore200e->bus->fw_data; @@ -2648,7 +2648,7 @@ fore200e_load_fw(struct fore200e* fore200e) } -static int __init +static int __devinit fore200e_register(struct fore200e* fore200e) { struct atm_dev* atm_dev; @@ -2675,7 +2675,7 @@ fore200e_register(struct fore200e* fore200e) } -static int __init +static int __devinit fore200e_init(struct fore200e* fore200e) { if (fore200e_register(fore200e) < 0) @@ -2721,7 +2721,7 @@ fore200e_init(struct fore200e* fore200e) return -EBUSY; fore200e_supply(fore200e); - + /* all done, board initialization is now complete */ fore200e->state = FORE200E_STATE_COMPLETE; return 0; diff --git a/drivers/block/DAC960.c b/drivers/block/DAC960.c index 6ede1f3..37b8cda 100644 --- a/drivers/block/DAC960.c +++ b/drivers/block/DAC960.c @@ -41,6 +41,7 @@ #include <linux/timer.h> #include <linux/pci.h> #include <linux/init.h> +#include <linux/random.h> #include <asm/io.h> #include <asm/uaccess.h> #include "DAC960.h" @@ -3463,7 +3464,7 @@ static inline boolean DAC960_ProcessCompletedRequest(DAC960_Command_T *Command, Command->SegmentCount, Command->DmaDirection); if (!end_that_request_first(Request, UpToDate, Command->BlockCount)) { - + add_disk_randomness(Request->rq_disk); end_that_request_last(Request, UpToDate); if (Command->Completion) { diff --git a/drivers/char/hw_random.c b/drivers/char/hw_random.c index b3bc2e3..29dc87e 100644 --- a/drivers/char/hw_random.c +++ b/drivers/char/hw_random.c @@ -131,7 +131,9 @@ enum { rng_hw_none, rng_hw_intel, rng_hw_amd, +#ifdef __i386__ rng_hw_via, +#endif rng_hw_geode, }; diff --git a/drivers/char/mmtimer.c b/drivers/char/mmtimer.c index c923781..1b05fa6 100644 --- a/drivers/char/mmtimer.c +++ b/drivers/char/mmtimer.c @@ -675,7 +675,7 @@ static int __init mmtimer_init(void) cnodeid_t node, maxn = -1; if (!ia64_platform_is("sn2")) - return -1; + return 0; /* * Sanity check the cycles/sec variable diff --git a/drivers/char/pcmcia/cm4000_cs.c b/drivers/char/pcmcia/cm4000_cs.c index 649677b..5fdf185 100644 --- a/drivers/char/pcmcia/cm4000_cs.c +++ b/drivers/char/pcmcia/cm4000_cs.c @@ -13,11 +13,12 @@ * * (C) 2000,2001,2002,2003,2004 Omnikey AG * - * (C) 2005 Harald Welte <laforge@gnumonks.org> + * (C) 2005-2006 Harald Welte <laforge@gnumonks.org> * - Adhere to Kernel CodingStyle * - Port to 2.6.13 "new" style PCMCIA * - Check for copy_{from,to}_user return values * - Use nonseekable_open() + * - add class interface for udev device creation * * All rights reserved. Licensed under dual BSD/GPL license. */ @@ -56,7 +57,7 @@ module_param(pc_debug, int, 0600); #else #define DEBUGP(n, rdr, x, args...) #endif -static char *version = "cm4000_cs.c v2.4.0gm5 - All bugs added by Harald Welte"; +static char *version = "cm4000_cs.c v2.4.0gm6 - All bugs added by Harald Welte"; #define T_1SEC (HZ) #define T_10MSEC msecs_to_jiffies(10) @@ -156,6 +157,7 @@ struct cm4000_dev { /*queue*/ 4*sizeof(wait_queue_head_t)) static dev_link_t *dev_table[CM4000_MAX_DEV]; +static struct class *cmm_class; /* This table doesn't use spaces after the comma between fields and thus * violates CodingStyle. However, I don't really think wrapping it around will @@ -1937,6 +1939,9 @@ static int cm4000_attach(struct pcmcia_device *p_dev) link->state |= DEV_PRESENT | DEV_CONFIG_PENDING; cm4000_config(link, i); + class_device_create(cmm_class, NULL, MKDEV(major, i), NULL, + "cmm%d", i); + return 0; } @@ -1962,6 +1967,8 @@ static void cm4000_detach(struct pcmcia_device *p_dev) dev_table[devno] = NULL; kfree(dev); + class_device_destroy(cmm_class, MKDEV(major, devno)); + return; } @@ -1995,8 +2002,18 @@ static struct pcmcia_driver cm4000_driver = { static int __init cmm_init(void) { + int rc; + printk(KERN_INFO "%s\n", version); - pcmcia_register_driver(&cm4000_driver); + + cmm_class = class_create(THIS_MODULE, "cardman_4000"); + if (!cmm_class) + return -1; + + rc = pcmcia_register_driver(&cm4000_driver); + if (rc < 0) + return rc; + major = register_chrdev(0, DEVICE_NAME, &cm4000_fops); if (major < 0) { printk(KERN_WARNING MODULE_NAME @@ -2012,6 +2029,7 @@ static void __exit cmm_exit(void) printk(KERN_INFO MODULE_NAME ": unloading\n"); pcmcia_unregister_driver(&cm4000_driver); unregister_chrdev(major, DEVICE_NAME); + class_destroy(cmm_class); }; module_init(cmm_init); diff --git a/drivers/char/pcmcia/cm4040_cs.c b/drivers/char/pcmcia/cm4040_cs.c index 46eb371..466e33b 100644 --- a/drivers/char/pcmcia/cm4040_cs.c +++ b/drivers/char/pcmcia/cm4040_cs.c @@ -3,12 +3,13 @@ * * (c) 2000-2004 Omnikey AG (http://www.omnikey.com/) * - * (C) 2005 Harald Welte <laforge@gnumonks.org> + * (C) 2005-2006 Harald Welte <laforge@gnumonks.org> * - add support for poll() * - driver cleanup * - add waitqueues * - adhere to linux kernel coding style and policies * - support 2.6.13 "new style" pcmcia interface + * - add class interface for udev device creation * * The device basically is a USB CCID compliant device that has been * attached to an I/O-Mapped FIFO. @@ -53,7 +54,7 @@ module_param(pc_debug, int, 0600); #endif static char *version = -"OMNIKEY CardMan 4040 v1.1.0gm4 - All bugs added by Harald Welte"; +"OMNIKEY CardMan 4040 v1.1.0gm5 - All bugs added by Harald Welte"; #define CCID_DRIVER_BULK_DEFAULT_TIMEOUT (150*HZ) #define CCID_DRIVER_ASYNC_POWERUP_TIMEOUT (35*HZ) @@ -67,6 +68,7 @@ static char *version = static void reader_release(dev_link_t *link); static int major; +static struct class *cmx_class; #define BS_READABLE 0x01 #define BS_WRITABLE 0x02 @@ -696,6 +698,9 @@ static int reader_attach(struct pcmcia_device *p_dev) link->state |= DEV_PRESENT | DEV_CONFIG_PENDING; reader_config(link, i); + class_device_create(cmx_class, NULL, MKDEV(major, i), NULL, + "cmx%d", i); + return 0; } @@ -721,6 +726,8 @@ static void reader_detach(struct pcmcia_device *p_dev) dev_table[devno] = NULL; kfree(dev); + class_device_destroy(cmx_class, MKDEV(major, devno)); + return; } @@ -755,8 +762,17 @@ static struct pcmcia_driver reader_driver = { static int __init cm4040_init(void) { + int rc; + printk(KERN_INFO "%s\n", version); - pcmcia_register_driver(&reader_driver); + cmx_class = class_create(THIS_MODULE, "cardman_4040"); + if (!cmx_class) + return -1; + + rc = pcmcia_register_driver(&reader_driver); + if (rc < 0) + return rc; + major = register_chrdev(0, DEVICE_NAME, &reader_fops); if (major < 0) { printk(KERN_WARNING MODULE_NAME @@ -771,6 +787,7 @@ static void __exit cm4040_exit(void) printk(KERN_INFO MODULE_NAME ": unloading\n"); pcmcia_unregister_driver(&reader_driver); unregister_chrdev(major, DEVICE_NAME); + class_destroy(cmx_class); } module_init(cm4040_init); diff --git a/drivers/char/synclink_gt.c b/drivers/char/synclink_gt.c index a85a60a..b046390 100644 --- a/drivers/char/synclink_gt.c +++ b/drivers/char/synclink_gt.c @@ -306,7 +306,7 @@ struct slgt_info { int tx_active; unsigned char signals; /* serial signal states */ - unsigned int init_error; /* initialization error */ + int init_error; /* initialization error */ unsigned char *tx_buf; int tx_count; diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c index e9bba94..53d3d06 100644 --- a/drivers/char/tty_io.c +++ b/drivers/char/tty_io.c @@ -303,7 +303,7 @@ static struct tty_buffer *tty_buffer_find(struct tty_struct *tty, size_t size) t->commit = 0; t->read = 0; /* DEBUG ONLY */ - memset(t->data, '*', size); +/* memset(t->data, '*', size); */ /* printk("Flip recycle %p\n", t); */ return t; } diff --git a/drivers/ide/legacy/ide-cs.c b/drivers/ide/legacy/ide-cs.c index 4c2af90..6213bd3 100644 --- a/drivers/ide/legacy/ide-cs.c +++ b/drivers/ide/legacy/ide-cs.c @@ -445,6 +445,7 @@ static struct pcmcia_device_id ide_ids[] = { PCMCIA_DEVICE_PROD_ID12("PCMCIA", "PnPIDE", 0x281f1c5d, 0x0c694728), PCMCIA_DEVICE_PROD_ID12("SHUTTLE TECHNOLOGY LTD.", "PCCARD-IDE/ATAPI Adapter", 0x4a3f0ba0, 0x322560e1), PCMCIA_DEVICE_PROD_ID12("TOSHIBA", "MK2001MPL", 0xb4585a1a, 0x3489e003), + PCMCIA_DEVICE_PROD_ID1("TRANSCEND 512M ", 0xd0909443), PCMCIA_DEVICE_PROD_ID12("WIT", "IDE16", 0x244e5994, 0x3e232852), PCMCIA_DEVICE_PROD_ID1("STI Flash", 0xe4a13209), PCMCIA_DEVICE_PROD_ID12("STI", "Flash 5.0", 0xbf2df18d, 0x8cb57a0e), diff --git a/drivers/ieee1394/video1394.c b/drivers/ieee1394/video1394.c index 39fb883..216dbbf 100644 --- a/drivers/ieee1394/video1394.c +++ b/drivers/ieee1394/video1394.c @@ -744,7 +744,7 @@ static int __video1394_ioctl(struct file *file, if (i == ISO_CHANNELS) { PRINT(KERN_ERR, ohci->host->id, "No free channel found"); - return EAGAIN; + return -EAGAIN; } if (!(ohci->ISO_channel_usage & mask)) { v.channel = i; diff --git a/drivers/infiniband/ulp/srp/ib_srp.c b/drivers/infiniband/ulp/srp/ib_srp.c index 2d2d4ac..960dae5 100644 --- a/drivers/infiniband/ulp/srp/ib_srp.c +++ b/drivers/infiniband/ulp/srp/ib_srp.c @@ -1155,6 +1155,12 @@ static int srp_send_tsk_mgmt(struct scsi_cmnd *scmnd, u8 func) spin_lock_irq(target->scsi_host->host_lock); + if (target->state == SRP_TARGET_DEAD || + target->state == SRP_TARGET_REMOVED) { + scmnd->result = DID_BAD_TARGET << 16; + goto out; + } + if (scmnd->host_scribble == (void *) -1L) goto out; diff --git a/drivers/isdn/hisax/config.c b/drivers/isdn/hisax/config.c index 8159bce..df9d652 100644 --- a/drivers/isdn/hisax/config.c +++ b/drivers/isdn/hisax/config.c @@ -1929,6 +1929,8 @@ static struct pci_device_id hisax_pci_tbl[] __initdata = { {PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_B00B, PCI_ANY_ID, PCI_ANY_ID}, {PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_B00C, PCI_ANY_ID, PCI_ANY_ID}, {PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_B100, PCI_ANY_ID, PCI_ANY_ID}, + {PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_B700, PCI_ANY_ID, PCI_ANY_ID}, + {PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_B701, PCI_ANY_ID, PCI_ANY_ID}, {PCI_VENDOR_ID_ABOCOM, PCI_DEVICE_ID_ABOCOM_2BD1, PCI_ANY_ID, PCI_ANY_ID}, {PCI_VENDOR_ID_ASUSTEK, PCI_DEVICE_ID_ASUSTEK_0675, PCI_ANY_ID, PCI_ANY_ID}, {PCI_VENDOR_ID_BERKOM, PCI_DEVICE_ID_BERKOM_T_CONCEPT, PCI_ANY_ID, PCI_ANY_ID}, diff --git a/drivers/isdn/hisax/hfc_pci.c b/drivers/isdn/hisax/hfc_pci.c index 4866fc3..91d25ac 100644 --- a/drivers/isdn/hisax/hfc_pci.c +++ b/drivers/isdn/hisax/hfc_pci.c @@ -51,6 +51,8 @@ static const PCI_ENTRY id_list[] = {PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_B00B, "Billion", "B00B"}, {PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_B00C, "Billion", "B00C"}, {PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_B100, "Seyeon", "B100"}, + {PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_B700, "Primux II S0", "B700"}, + {PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_B701, "Primux II S0 NT", "B701"}, {PCI_VENDOR_ID_ABOCOM, PCI_DEVICE_ID_ABOCOM_2BD1, "Abocom/Magitek", "2BD1"}, {PCI_VENDOR_ID_ASUSTEK, PCI_DEVICE_ID_ASUSTEK_0675, "Asuscom/Askey", "675"}, {PCI_VENDOR_ID_BERKOM, PCI_DEVICE_ID_BERKOM_T_CONCEPT, "German telekom", "T-Concept"}, diff --git a/drivers/isdn/hisax/hfc_usb.c b/drivers/isdn/hisax/hfc_usb.c index ca5b4a3..262c441 100644 --- a/drivers/isdn/hisax/hfc_usb.c +++ b/drivers/isdn/hisax/hfc_usb.c @@ -1,7 +1,7 @@ /* * hfc_usb.c * - * $Id: hfc_usb.c,v 4.36 2005/04/08 09:55:13 martinb1 Exp $ + * $Id: hfc_usb.c,v 2.3.2.13 2006/02/17 17:17:22 mbachem Exp $ * * modular HiSax ISDN driver for Colognechip HFC-S USB chip * @@ -45,7 +45,7 @@ #include "hfc_usb.h" static const char *hfcusb_revision = - "$Revision: 4.36 $ $Date: 2005/04/08 09:55:13 $ "; + "$Revision: 2.3.2.13 $ $Date: 2006/02/17 17:17:22 $ "; /* Hisax debug support * use "modprobe debug=x" where x is bitfield of USB_DBG & ISDN_DBG @@ -219,7 +219,7 @@ symbolic(struct hfcusb_symbolic_list list[], const int num) for (i = 0; list[i].name != NULL; i++) if (list[i].num == num) return (list[i].name); - return "<unkown ERROR>"; + return "<unknown ERROR>"; } @@ -235,9 +235,9 @@ ctrl_start_transfer(hfcusb_data * hfc) hfc->ctrl_urb->transfer_buffer = NULL; hfc->ctrl_urb->transfer_buffer_length = 0; hfc->ctrl_write.wIndex = - hfc->ctrl_buff[hfc->ctrl_out_idx].hfc_reg; + cpu_to_le16(hfc->ctrl_buff[hfc->ctrl_out_idx].hfc_reg); hfc->ctrl_write.wValue = - hfc->ctrl_buff[hfc->ctrl_out_idx].reg_val; + cpu_to_le16(hfc->ctrl_buff[hfc->ctrl_out_idx].reg_val); usb_submit_urb(hfc->ctrl_urb, GFP_ATOMIC); /* start transfer */ } @@ -1282,7 +1282,7 @@ usb_init(hfcusb_data * hfc) /* init the background machinery for control requests */ hfc->ctrl_read.bRequestType = 0xc0; hfc->ctrl_read.bRequest = 1; - hfc->ctrl_read.wLength = 1; + hfc->ctrl_read.wLength = cpu_to_le16(1); hfc->ctrl_write.bRequestType = 0x40; hfc->ctrl_write.bRequest = 0; hfc->ctrl_write.wLength = 0; @@ -1373,9 +1373,8 @@ hfc_usb_probe(struct usb_interface *intf, const struct usb_device_id *id) vend_idx = 0xffff; for (i = 0; hfcusb_idtab[i].idVendor; i++) { - if (dev->descriptor.idVendor == hfcusb_idtab[i].idVendor - && dev->descriptor.idProduct == - hfcusb_idtab[i].idProduct) { + if ((le16_to_cpu(dev->descriptor.idVendor) == hfcusb_idtab[i].idVendor) + && (le16_to_cpu(dev->descriptor.idProduct) == hfcusb_idtab[i].idProduct)) { vend_idx = i; continue; } @@ -1516,8 +1515,7 @@ hfc_usb_probe(struct usb_interface *intf, const struct usb_device_id *id) usb_transfer_mode = USB_INT; packet_size = - ep->desc. - wMaxPacketSize; + le16_to_cpu(ep->desc.wMaxPacketSize); break; case USB_ENDPOINT_XFER_BULK: if (ep_addr & 0x80) @@ -1545,8 +1543,7 @@ hfc_usb_probe(struct usb_interface *intf, const struct usb_device_id *id) usb_transfer_mode = USB_BULK; packet_size = - ep->desc. - wMaxPacketSize; + le16_to_cpu(ep->desc.wMaxPacketSize); break; case USB_ENDPOINT_XFER_ISOC: if (ep_addr & 0x80) @@ -1574,8 +1571,7 @@ hfc_usb_probe(struct usb_interface *intf, const struct usb_device_id *id) usb_transfer_mode = USB_ISOC; iso_packet_size = - ep->desc. - wMaxPacketSize; + le16_to_cpu(ep->desc.wMaxPacketSize); break; default: context-> @@ -1588,10 +1584,8 @@ hfc_usb_probe(struct usb_interface *intf, const struct usb_device_id *id) fifonum = cidx; context->fifos[cidx].hfc = context; - context->fifos[cidx]. - usb_packet_maxlen = - ep->desc. - wMaxPacketSize; + context->fifos[cidx].usb_packet_maxlen = + le16_to_cpu(ep->desc.wMaxPacketSize); context->fifos[cidx]. intervall = ep->desc.bInterval; diff --git a/drivers/isdn/i4l/isdn_tty.c b/drivers/isdn/i4l/isdn_tty.c index 3936336..aeaa1db 100644 --- a/drivers/isdn/i4l/isdn_tty.c +++ b/drivers/isdn/i4l/isdn_tty.c @@ -1682,6 +1682,7 @@ isdn_tty_close(struct tty_struct *tty, struct file *filp) #ifdef ISDN_DEBUG_MODEM_OPEN printk(KERN_DEBUG "isdn_tty_close after info->count != 0\n"); #endif + module_put(info->owner); return; } info->flags |= ISDN_ASYNC_CLOSING; diff --git a/drivers/macintosh/windfarm_core.c b/drivers/macintosh/windfarm_core.c index bb8d5ef..6c0ba04 100644 --- a/drivers/macintosh/windfarm_core.c +++ b/drivers/macintosh/windfarm_core.c @@ -35,6 +35,8 @@ #include <linux/platform_device.h> #include <linux/mutex.h> +#include <asm/prom.h> + #include "windfarm.h" #define VERSION "0.2" @@ -465,6 +467,11 @@ static int __init windfarm_core_init(void) { DBG("wf: core loaded\n"); + /* Don't register on old machines that use therm_pm72 for now */ + if (machine_is_compatible("PowerMac7,2") || + machine_is_compatible("PowerMac7,3") || + machine_is_compatible("RackMac3,1")) + return -ENODEV; platform_device_register(&wf_platform_device); return 0; } diff --git a/drivers/macintosh/windfarm_cpufreq_clamp.c b/drivers/macintosh/windfarm_cpufreq_clamp.c index 607dbac..81337cd 100644 --- a/drivers/macintosh/windfarm_cpufreq_clamp.c +++ b/drivers/macintosh/windfarm_cpufreq_clamp.c @@ -8,6 +8,8 @@ #include <linux/wait.h> #include <linux/cpufreq.h> +#include <asm/prom.h> + #include "windfarm.h" #define VERSION "0.3" @@ -74,6 +76,12 @@ static int __init wf_cpufreq_clamp_init(void) { struct wf_control *clamp; + /* Don't register on old machines that use therm_pm72 for now */ + if (machine_is_compatible("PowerMac7,2") || + machine_is_compatible("PowerMac7,3") || + machine_is_compatible("RackMac3,1")) + return -ENODEV; + clamp = kmalloc(sizeof(struct wf_control), GFP_KERNEL); if (clamp == NULL) return -ENOMEM; diff --git a/drivers/macintosh/windfarm_lm75_sensor.c b/drivers/macintosh/windfarm_lm75_sensor.c index 906d3ec..423bfa2 100644 --- a/drivers/macintosh/windfarm_lm75_sensor.c +++ b/drivers/macintosh/windfarm_lm75_sensor.c @@ -25,7 +25,7 @@ #include "windfarm.h" -#define VERSION "0.1" +#define VERSION "0.2" #undef DEBUG @@ -113,6 +113,7 @@ static struct wf_lm75_sensor *wf_lm75_create(struct i2c_adapter *adapter, const char *loc) { struct wf_lm75_sensor *lm; + int rc; DBG("wf_lm75: creating %s device at address 0x%02x\n", ds1775 ? "ds1775" : "lm75", addr); @@ -139,9 +140,11 @@ static struct wf_lm75_sensor *wf_lm75_create(struct i2c_adapter *adapter, lm->i2c.driver = &wf_lm75_driver; strncpy(lm->i2c.name, lm->sens.name, I2C_NAME_SIZE-1); - if (i2c_attach_client(&lm->i2c)) { - printk(KERN_ERR "windfarm: failed to attach %s %s to i2c\n", - ds1775 ? "ds1775" : "lm75", lm->i2c.name); + rc = i2c_attach_client(&lm->i2c); + if (rc) { + printk(KERN_ERR "windfarm: failed to attach %s %s to i2c," + " err %d\n", ds1775 ? "ds1775" : "lm75", + lm->i2c.name, rc); goto fail; } @@ -175,16 +178,22 @@ static int wf_lm75_attach(struct i2c_adapter *adapter) (dev = of_get_next_child(busnode, dev)) != NULL;) { const char *loc = get_property(dev, "hwsensor-location", NULL); - u32 *reg = (u32 *)get_property(dev, "reg", NULL); - DBG(" dev: %s... (loc: %p, reg: %p)\n", dev->name, loc, reg); - if (loc == NULL || reg == NULL) + u8 addr; + + /* We must re-match the adapter in order to properly check + * the channel on multibus setups + */ + if (!pmac_i2c_match_adapter(dev, adapter)) + continue; + addr = pmac_i2c_get_dev_addr(dev); + if (loc == NULL || addr == 0) continue; /* real lm75 */ if (device_is_compatible(dev, "lm75")) - wf_lm75_create(adapter, *reg, 0, loc); + wf_lm75_create(adapter, addr, 0, loc); /* ds1775 (compatible, better resolution */ else if (device_is_compatible(dev, "ds1775")) - wf_lm75_create(adapter, *reg, 1, loc); + wf_lm75_create(adapter, addr, 1, loc); } return 0; } @@ -206,6 +215,11 @@ static int wf_lm75_detach(struct i2c_client *client) static int __init wf_lm75_sensor_init(void) { + /* Don't register on old machines that use therm_pm72 for now */ + if (machine_is_compatible("PowerMac7,2") || + machine_is_compatible("PowerMac7,3") || + machine_is_compatible("RackMac3,1")) + return -ENODEV; return i2c_add_driver(&wf_lm75_driver); } diff --git a/drivers/macintosh/windfarm_max6690_sensor.c b/drivers/macintosh/windfarm_max6690_sensor.c index 5b9ad6c..8e99d40 100644 --- a/drivers/macintosh/windfarm_max6690_sensor.c +++ b/drivers/macintosh/windfarm_max6690_sensor.c @@ -17,7 +17,7 @@ #include "windfarm.h" -#define VERSION "0.1" +#define VERSION "0.2" /* This currently only exports the external temperature sensor, since that's all the control loops need. */ @@ -81,7 +81,7 @@ static struct wf_sensor_ops wf_max6690_ops = { static void wf_max6690_create(struct i2c_adapter *adapter, u8 addr) { struct wf_6690_sensor *max; - char *name = "u4-temp"; + char *name = "backside-temp"; max = kzalloc(sizeof(struct wf_6690_sensor), GFP_KERNEL); if (max == NULL) { @@ -118,7 +118,6 @@ static int wf_max6690_attach(struct i2c_adapter *adapter) struct device_node *busnode, *dev = NULL; struct pmac_i2c_bus *bus; const char *loc; - u32 *reg; bus = pmac_i2c_adapter_to_bus(adapter); if (bus == NULL) @@ -126,16 +125,23 @@ static int wf_max6690_attach(struct i2c_adapter *adapter) busnode = pmac_i2c_get_bus_node(bus); while ((dev = of_get_next_child(busnode, dev)) != NULL) { + u8 addr; + + /* We must re-match the adapter in order to properly check + * the channel on multibus setups + */ + if (!pmac_i2c_match_adapter(dev, adapter)) + continue; if (!device_is_compatible(dev, "max6690")) continue; + addr = pmac_i2c_get_dev_addr(dev); loc = get_property(dev, "hwsensor-location", NULL); - reg = (u32 *) get_property(dev, "reg", NULL); - if (!loc || !reg) + if (loc == NULL || addr == 0) continue; - printk("found max6690, loc=%s reg=%x\n", loc, *reg); + printk("found max6690, loc=%s addr=0x%02x\n", loc, addr); if (strcmp(loc, "BACKSIDE")) continue; - wf_max6690_create(adapter, *reg); + wf_max6690_create(adapter, addr); } return 0; @@ -153,6 +159,11 @@ static int wf_max6690_detach(struct i2c_client *client) static int __init wf_max6690_sensor_init(void) { + /* Don't register on old machines that use therm_pm72 for now */ + if (machine_is_compatible("PowerMac7,2") || + machine_is_compatible("PowerMac7,3") || + machine_is_compatible("RackMac3,1")) + return -ENODEV; return i2c_add_driver(&wf_max6690_driver); } diff --git a/drivers/macintosh/windfarm_pid.c b/drivers/macintosh/windfarm_pid.c index 0842432..f10efb2 100644 --- a/drivers/macintosh/windfarm_pid.c +++ b/drivers/macintosh/windfarm_pid.c @@ -143,3 +143,7 @@ s32 wf_cpu_pid_run(struct wf_cpu_pid_state *st, s32 new_power, s32 new_temp) return st->target; } EXPORT_SYMBOL_GPL(wf_cpu_pid_run); + +MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>"); +MODULE_DESCRIPTION("PID algorithm for PowerMacs thermal control"); +MODULE_LICENSE("GPL"); diff --git a/drivers/macintosh/windfarm_pm112.c b/drivers/macintosh/windfarm_pm112.c index c2a4e68..ef66bf2 100644 --- a/drivers/macintosh/windfarm_pm112.c +++ b/drivers/macintosh/windfarm_pm112.c @@ -358,6 +358,7 @@ static void backside_fan_tick(void) return; if (!backside_tick) { /* first time; initialize things */ + printk(KERN_INFO "windfarm: Backside control loop started.\n"); backside_param.min = backside_fan->ops->get_min(backside_fan); backside_param.max = backside_fan->ops->get_max(backside_fan); wf_pid_init(&backside_pid, &backside_param); @@ -407,6 +408,7 @@ static void drive_bay_fan_tick(void) return; if (!drive_bay_tick) { /* first time; initialize things */ + printk(KERN_INFO "windfarm: Drive bay control loop started.\n"); drive_bay_prm.min = drive_bay_fan->ops->get_min(drive_bay_fan); drive_bay_prm.max = drive_bay_fan->ops->get_max(drive_bay_fan); wf_pid_init(&drive_bay_pid, &drive_bay_prm); @@ -458,6 +460,7 @@ static void slots_fan_tick(void) return; if (!slots_started) { /* first time; initialize things */ + printk(KERN_INFO "windfarm: Slots control loop started.\n"); wf_pid_init(&slots_pid, &slots_param); slots_started = 1; } @@ -504,6 +507,7 @@ static void pm112_tick(void) if (!started) { started = 1; + printk(KERN_INFO "windfarm: CPUs control loops started.\n"); for (i = 0; i < nr_cores; ++i) { if (create_cpu_loop(i) < 0) { failure_state = FAILURE_PERM; @@ -594,8 +598,6 @@ static void pm112_new_sensor(struct wf_sensor *sr) { unsigned int i; - if (have_all_sensors) - return; if (!strncmp(sr->name, "cpu-temp-", 9)) { i = sr->name[9] - '0'; if (sr->name[10] == 0 && i < NR_CORES && @@ -613,7 +615,7 @@ static void pm112_new_sensor(struct wf_sensor *sr) } else if (!strcmp(sr->name, "slots-power")) { if (slots_power == NULL && wf_get_sensor(sr) == 0) slots_power = sr; - } else if (!strcmp(sr->name, "u4-temp")) { + } else if (!strcmp(sr->name, "backside-temp")) { if (u4_temp == NULL && wf_get_sensor(sr) == 0) u4_temp = sr; } else diff --git a/drivers/media/dvb/b2c2/flexcop-fe-tuner.c b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c index 390cc3a..9c7f122 100644 --- a/drivers/media/dvb/b2c2/flexcop-fe-tuner.c +++ b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c @@ -526,7 +526,7 @@ int flexcop_frontend_init(struct flexcop_device *fc) info("found the stv0297 at i2c address: 0x%02x",alps_tdee4_stv0297_config.demod_address); } else /* try the sky v2.3 (vp310/Samsung tbdu18132(tsa5059)) */ - if ((fc->fe = vp310_attach(&skystar23_samsung_tbdu18132_config, &fc->i2c_adap)) != NULL) { + if ((fc->fe = vp310_mt312_attach(&skystar23_samsung_tbdu18132_config, &fc->i2c_adap)) != NULL) { ops = fc->fe->ops; ops->diseqc_send_master_cmd = flexcop_diseqc_send_master_cmd; diff --git a/drivers/media/dvb/bt8xx/bt878.c b/drivers/media/dvb/bt8xx/bt878.c index 34c3189..356f447 100644 --- a/drivers/media/dvb/bt8xx/bt878.c +++ b/drivers/media/dvb/bt8xx/bt878.c @@ -382,7 +382,7 @@ bt878_device_control(struct bt878 *bt, unsigned int cmd, union dst_gpio_packet * EXPORT_SYMBOL(bt878_device_control); -struct cards card_list[] __devinitdata = { +static struct cards card_list[] __devinitdata = { { 0x01010071, BTTV_BOARD_NEBULA_DIGITV, "Nebula Electronics DigiTV" }, { 0x07611461, BTTV_BOARD_AVDVBT_761, "AverMedia AverTV DVB-T 761" }, diff --git a/drivers/media/dvb/bt8xx/dst.c b/drivers/media/dvb/bt8xx/dst.c index 3a2ff1c..0310e3d 100644 --- a/drivers/media/dvb/bt8xx/dst.c +++ b/drivers/media/dvb/bt8xx/dst.c @@ -602,7 +602,7 @@ static int dst_type_print(u8 type) */ -struct dst_types dst_tlist[] = { +static struct dst_types dst_tlist[] = { { .device_id = "200103A", .offset = 0, diff --git a/drivers/media/dvb/dvb-core/demux.h b/drivers/media/dvb/dvb-core/demux.h index 9f02582..0c1d87c 100644 --- a/drivers/media/dvb/dvb-core/demux.h +++ b/drivers/media/dvb/dvb-core/demux.h @@ -216,7 +216,7 @@ struct dmx_frontend { /*--------------------------------------------------------------------------*/ /* - * Flags OR'ed in the capabilites field of struct dmx_demux. + * Flags OR'ed in the capabilities field of struct dmx_demux. */ #define DMX_TS_FILTERING 1 diff --git a/drivers/media/dvb/dvb-usb/cxusb.c b/drivers/media/dvb/dvb-usb/cxusb.c index f327fac..162f979 100644 --- a/drivers/media/dvb/dvb-usb/cxusb.c +++ b/drivers/media/dvb/dvb-usb/cxusb.c @@ -282,7 +282,7 @@ static struct cx22702_config cxusb_cx22702_config = { .pll_set = dvb_usb_pll_set_i2c, }; -static struct lgdt330x_config cxusb_lgdt330x_config = { +static struct lgdt330x_config cxusb_lgdt3303_config = { .demod_address = 0x0e, .demod_chip = LGDT3303, .pll_set = dvb_usb_pll_set_i2c, @@ -357,14 +357,14 @@ static int cxusb_cx22702_frontend_attach(struct dvb_usb_device *d) return -EIO; } -static int cxusb_lgdt330x_frontend_attach(struct dvb_usb_device *d) +static int cxusb_lgdt3303_frontend_attach(struct dvb_usb_device *d) { if (usb_set_interface(d->udev,0,7) < 0) err("set interface failed"); cxusb_ctrl_msg(d,CMD_DIGITAL, NULL, 0, NULL, 0); - if ((d->fe = lgdt330x_attach(&cxusb_lgdt330x_config, &d->i2c_adap)) != NULL) + if ((d->fe = lgdt330x_attach(&cxusb_lgdt3303_config, &d->i2c_adap)) != NULL) return 0; return -EIO; @@ -506,7 +506,7 @@ static struct dvb_usb_properties cxusb_bluebird_lgh064f_properties = { .streaming_ctrl = cxusb_streaming_ctrl, .power_ctrl = cxusb_power_ctrl, - .frontend_attach = cxusb_lgdt330x_frontend_attach, + .frontend_attach = cxusb_lgdt3303_frontend_attach, .tuner_attach = cxusb_lgh064f_tuner_attach, .i2c_algo = &cxusb_i2c_algo, diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-init.c b/drivers/media/dvb/dvb-usb/dvb-usb-init.c index 716f8bf..ce34a55 100644 --- a/drivers/media/dvb/dvb-usb/dvb-usb-init.c +++ b/drivers/media/dvb/dvb-usb/dvb-usb-init.c @@ -47,7 +47,7 @@ static int dvb_usb_init(struct dvb_usb_device *d) d->state = DVB_USB_STATE_INIT; -/* check the capabilites and set appropriate variables */ +/* check the capabilities and set appropriate variables */ /* speed - when running at FULL speed we need a HW PID filter */ if (d->udev->speed == USB_SPEED_FULL && !(d->props.caps & DVB_USB_HAS_PID_FILTER)) { diff --git a/drivers/media/dvb/dvb-usb/dvb-usb.h b/drivers/media/dvb/dvb-usb/dvb-usb.h index 5e5d21a..d4909e5 100644 --- a/drivers/media/dvb/dvb-usb/dvb-usb.h +++ b/drivers/media/dvb/dvb-usb/dvb-usb.h @@ -87,7 +87,7 @@ struct dvb_usb_device; /** * struct dvb_usb_properties - properties of a dvb-usb-device - * @caps: capabilites of the DVB USB device. + * @caps: capabilities of the DVB USB device. * @pid_filter_count: number of PID filter position in the optional hardware * PID-filter. * diff --git a/drivers/media/dvb/frontends/Kconfig b/drivers/media/dvb/frontends/Kconfig index 76b6a2a..c676b1e 100644 --- a/drivers/media/dvb/frontends/Kconfig +++ b/drivers/media/dvb/frontends/Kconfig @@ -29,7 +29,7 @@ config DVB_TDA8083 A DVB-S tuner module. Say Y when you want to support this frontend. config DVB_MT312 - tristate "Zarlink MT312 based" + tristate "Zarlink VP310/MT312 based" depends on DVB_CORE help A DVB-S tuner module. Say Y when you want to support this frontend. diff --git a/drivers/media/dvb/frontends/mt312.c b/drivers/media/dvb/frontends/mt312.c index ec4e641..d3aea83 100644 --- a/drivers/media/dvb/frontends/mt312.c +++ b/drivers/media/dvb/frontends/mt312.c @@ -612,76 +612,6 @@ static void mt312_release(struct dvb_frontend* fe) kfree(state); } -static struct dvb_frontend_ops vp310_mt312_ops; - -struct dvb_frontend* vp310_attach(const struct mt312_config* config, - struct i2c_adapter* i2c) -{ - struct mt312_state* state = NULL; - - /* allocate memory for the internal state */ - state = kmalloc(sizeof(struct mt312_state), GFP_KERNEL); - if (state == NULL) - goto error; - - /* setup the state */ - state->config = config; - state->i2c = i2c; - memcpy(&state->ops, &vp310_mt312_ops, sizeof(struct dvb_frontend_ops)); - strcpy(state->ops.info.name, "Zarlink VP310 DVB-S"); - - /* check if the demod is there */ - if (mt312_readreg(state, ID, &state->id) < 0) - goto error; - if (state->id != ID_VP310) { - goto error; - } - - /* create dvb_frontend */ - state->frequency = 90; - state->frontend.ops = &state->ops; - state->frontend.demodulator_priv = state; - return &state->frontend; - -error: - kfree(state); - return NULL; -} - -struct dvb_frontend* mt312_attach(const struct mt312_config* config, - struct i2c_adapter* i2c) -{ - struct mt312_state* state = NULL; - - /* allocate memory for the internal state */ - state = kmalloc(sizeof(struct mt312_state), GFP_KERNEL); - if (state == NULL) - goto error; - - /* setup the state */ - state->config = config; - state->i2c = i2c; - memcpy(&state->ops, &vp310_mt312_ops, sizeof(struct dvb_frontend_ops)); - strcpy(state->ops.info.name, "Zarlink MT312 DVB-S"); - - /* check if the demod is there */ - if (mt312_readreg(state, ID, &state->id) < 0) - goto error; - if (state->id != ID_MT312) { - goto error; - } - - /* create dvb_frontend */ - state->frequency = 60; - state->frontend.ops = &state->ops; - state->frontend.demodulator_priv = state; - return &state->frontend; - -error: - kfree(state); - return NULL; -} - static struct dvb_frontend_ops vp310_mt312_ops = { .info = { @@ -720,6 +650,49 @@ static struct dvb_frontend_ops vp310_mt312_ops = { .set_voltage = mt312_set_voltage, }; +struct dvb_frontend* vp310_mt312_attach(const struct mt312_config* config, + struct i2c_adapter* i2c) +{ + struct mt312_state* state = NULL; + + /* allocate memory for the internal state */ + state = kmalloc(sizeof(struct mt312_state), GFP_KERNEL); + if (state == NULL) + goto error; + + /* setup the state */ + state->config = config; + state->i2c = i2c; + memcpy(&state->ops, &vp310_mt312_ops, sizeof(struct dvb_frontend_ops)); + + /* check if the demod is there */ + if (mt312_readreg(state, ID, &state->id) < 0) + goto error; + + switch (state->id) { + case ID_VP310: + strcpy(state->ops.info.name, "Zarlink VP310 DVB-S"); + state->frequency = 90; + break; + case ID_MT312: + strcpy(state->ops.info.name, "Zarlink MT312 DVB-S"); + state->frequency = 60; + break; + default: + printk (KERN_WARNING "Only Zarlink VP310/MT312 are supported chips.\n"); + goto error; + } + + /* create dvb_frontend */ + state->frontend.ops = &state->ops; + state->frontend.demodulator_priv = state; + return &state->frontend; + +error: + kfree(state); + return NULL; +} + module_param(debug, int, 0644); MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off)."); @@ -727,5 +700,4 @@ MODULE_DESCRIPTION("Zarlink VP310/MT312 DVB-S Demodulator driver"); MODULE_AUTHOR("Andreas Oberritter <obi@linuxtv.org>"); MODULE_LICENSE("GPL"); -EXPORT_SYMBOL(mt312_attach); -EXPORT_SYMBOL(vp310_attach); +EXPORT_SYMBOL(vp310_mt312_attach); diff --git a/drivers/media/dvb/frontends/mt312.h b/drivers/media/dvb/frontends/mt312.h index b3a53a7..074d844 100644 --- a/drivers/media/dvb/frontends/mt312.h +++ b/drivers/media/dvb/frontends/mt312.h @@ -38,10 +38,8 @@ struct mt312_config int (*pll_set)(struct dvb_frontend* fe, struct dvb_frontend_parameters* params); }; -extern struct dvb_frontend* mt312_attach(const struct mt312_config* config, - struct i2c_adapter* i2c); +struct dvb_frontend* vp310_mt312_attach(const struct mt312_config* config, + struct i2c_adapter* i2c); -extern struct dvb_frontend* vp310_attach(const struct mt312_config* config, - struct i2c_adapter* i2c); #endif // MT312_H diff --git a/drivers/media/dvb/frontends/stv0297.c b/drivers/media/dvb/frontends/stv0297.c index 6122ba7..eb15676 100644 --- a/drivers/media/dvb/frontends/stv0297.c +++ b/drivers/media/dvb/frontends/stv0297.c @@ -393,10 +393,6 @@ static int stv0297_set_frontend(struct dvb_frontend *fe, struct dvb_frontend_par break; case QAM_128: - delay = 150; - sweeprate = 1000; - break; - case QAM_256: delay = 200; sweeprate = 500; diff --git a/drivers/media/dvb/ttpci/av7110.c b/drivers/media/dvb/ttpci/av7110.c index d36369e..7c6ccb9 100644 --- a/drivers/media/dvb/ttpci/av7110.c +++ b/drivers/media/dvb/ttpci/av7110.c @@ -1439,7 +1439,7 @@ static int check_firmware(struct av7110* av7110) len = ntohl(*(u32*) ptr); ptr += 4; if (len >= 512) { - printk("dvb-ttpci: dpram file is way to big.\n"); + printk("dvb-ttpci: dpram file is way too big.\n"); return -EINVAL; } if (crc != crc32_le(0, ptr, len)) { @@ -2477,7 +2477,8 @@ static int frontend_init(struct av7110 *av7110) * The same behaviour of missing VSYNC can be duplicated on budget * cards, by seting DD1_INIT trigger mode 7 in 3rd nibble. */ -static int av7110_attach(struct saa7146_dev* dev, struct saa7146_pci_extension_data *pci_ext) +static int __devinit av7110_attach(struct saa7146_dev* dev, + struct saa7146_pci_extension_data *pci_ext) { const int length = TS_WIDTH * TS_HEIGHT; struct pci_dev *pdev = dev->pci; @@ -2827,7 +2828,7 @@ err_kfree_0: goto out; } -static int av7110_detach(struct saa7146_dev* saa) +static int __devexit av7110_detach(struct saa7146_dev* saa) { struct av7110 *av7110 = saa->ext_priv; dprintk(4, "%p\n", av7110); @@ -2974,7 +2975,7 @@ static struct saa7146_extension av7110_extension = { .module = THIS_MODULE, .pci_tbl = &pci_tbl[0], .attach = av7110_attach, - .detach = av7110_detach, + .detach = __devexit_p(av7110_detach), .irq_mask = MASK_19 | MASK_03 | MASK_10, .irq_func = av7110_irq, diff --git a/drivers/media/dvb/ttpci/av7110_hw.c b/drivers/media/dvb/ttpci/av7110_hw.c index b2e63e9..0bb6e74 100644 --- a/drivers/media/dvb/ttpci/av7110_hw.c +++ b/drivers/media/dvb/ttpci/av7110_hw.c @@ -245,6 +245,9 @@ int av7110_bootarm(struct av7110 *av7110) /* test DEBI */ iwdebi(av7110, DEBISWAP, DPRAM_BASE, 0x76543210, 4); + /* FIXME: Why does Nexus CA require 2x iwdebi for first init? */ + iwdebi(av7110, DEBISWAP, DPRAM_BASE, 0x76543210, 4); + if ((ret=irdebi(av7110, DEBINOSWAP, DPRAM_BASE, 0, 4)) != 0x10325476) { printk(KERN_ERR "dvb-ttpci: debi test in av7110_bootarm() failed: " "%08x != %08x (check your BIOS 'Plug&Play OS' settings)\n", diff --git a/drivers/media/dvb/ttpci/av7110_ir.c b/drivers/media/dvb/ttpci/av7110_ir.c index 617e4f6..d54bbcd 100644 --- a/drivers/media/dvb/ttpci/av7110_ir.c +++ b/drivers/media/dvb/ttpci/av7110_ir.c @@ -208,7 +208,7 @@ static void ir_handler(struct av7110 *av7110, u32 ircom) } -int __init av7110_ir_init(struct av7110 *av7110) +int __devinit av7110_ir_init(struct av7110 *av7110) { static struct proc_dir_entry *e; @@ -248,7 +248,7 @@ int __init av7110_ir_init(struct av7110 *av7110) } -void __exit av7110_ir_exit(struct av7110 *av7110) +void __devexit av7110_ir_exit(struct av7110 *av7110) { int i; diff --git a/drivers/media/video/cpia.c b/drivers/media/video/cpia.c index 9f59541..85d964b 100644 --- a/drivers/media/video/cpia.c +++ b/drivers/media/video/cpia.c @@ -3369,7 +3369,7 @@ static int cpia_do_ioctl(struct inode *inode, struct file *file, //DBG("cpia_ioctl: %u\n", ioctlnr); switch (ioctlnr) { - /* query capabilites */ + /* query capabilities */ case VIDIOCGCAP: { struct video_capability *b = arg; diff --git a/drivers/media/video/cx25840/cx25840-core.c b/drivers/media/video/cx25840/cx25840-core.c index 08ffd1f..5588b9a 100644 --- a/drivers/media/video/cx25840/cx25840-core.c +++ b/drivers/media/video/cx25840/cx25840-core.c @@ -567,7 +567,7 @@ static struct v4l2_queryctrl cx25840_qctrl[] = { .type = V4L2_CTRL_TYPE_INTEGER, .name = "Contrast", .minimum = 0, - .maximum = 255, + .maximum = 127, .step = 1, .default_value = 64, .flags = 0, @@ -576,7 +576,7 @@ static struct v4l2_queryctrl cx25840_qctrl[] = { .type = V4L2_CTRL_TYPE_INTEGER, .name = "Saturation", .minimum = 0, - .maximum = 255, + .maximum = 127, .step = 1, .default_value = 64, .flags = 0, diff --git a/drivers/media/video/saa7115.c b/drivers/media/video/saa7115.c index 048d000..ffd87ce 100644 --- a/drivers/media/video/saa7115.c +++ b/drivers/media/video/saa7115.c @@ -1027,7 +1027,7 @@ static struct v4l2_queryctrl saa7115_qctrl[] = { .type = V4L2_CTRL_TYPE_INTEGER, .name = "Contrast", .minimum = 0, - .maximum = 255, + .maximum = 127, .step = 1, .default_value = 64, .flags = 0, @@ -1036,7 +1036,7 @@ static struct v4l2_queryctrl saa7115_qctrl[] = { .type = V4L2_CTRL_TYPE_INTEGER, .name = "Saturation", .minimum = 0, - .maximum = 255, + .maximum = 127, .step = 1, .default_value = 64, .flags = 0, diff --git a/drivers/media/video/saa7134/saa7134-alsa.c b/drivers/media/video/saa7134/saa7134-alsa.c index a7a6ab9..7df5e08 100644 --- a/drivers/media/video/saa7134/saa7134-alsa.c +++ b/drivers/media/video/saa7134/saa7134-alsa.c @@ -54,10 +54,12 @@ MODULE_PARM_DESC(debug,"enable debug messages [alsa]"); static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; /* Index 0-MAX */ static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; /* ID for this card */ -static int enable[SNDRV_CARDS] = {1, [1 ... (SNDRV_CARDS - 1)] = 0}; +static int enable[SNDRV_CARDS] = {1, [1 ... (SNDRV_CARDS - 1)] = 1}; module_param_array(index, int, NULL, 0444); +module_param_array(enable, int, NULL, 0444); MODULE_PARM_DESC(index, "Index value for SAA7134 capture interface(s)."); +MODULE_PARM_DESC(enable, "Enable (or not) the SAA7134 capture interface(s)."); #define dprintk(fmt, arg...) if (debug) \ printk(KERN_DEBUG "%s/alsa: " fmt, dev->name , ##arg) diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c index 5a35d3b..6bc63a4 100644 --- a/drivers/media/video/saa7134/saa7134-cards.c +++ b/drivers/media/video/saa7134/saa7134-cards.c @@ -977,7 +977,7 @@ struct saa7134_board saa7134_boards[] = { .radio_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, - .tda9887_conf = TDA9887_PRESENT | TDA9887_INTERCARRIER | TDA9887_PORT2_ACTIVE, + .tda9887_conf = TDA9887_PRESENT | TDA9887_INTERCARRIER | TDA9887_PORT2_INACTIVE, .inputs = {{ .name = name_tv, .vmux = 3, @@ -1666,7 +1666,7 @@ struct saa7134_board saa7134_boards[] = { .radio_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, - .tda9887_conf = TDA9887_PRESENT | TDA9887_INTERCARRIER | TDA9887_PORT2_ACTIVE, + .tda9887_conf = TDA9887_PRESENT | TDA9887_INTERCARRIER | TDA9887_PORT2_INACTIVE, .mpeg = SAA7134_MPEG_DVB, .inputs = {{ .name = name_tv, @@ -2187,7 +2187,7 @@ struct saa7134_board saa7134_boards[] = { .radio_type = UNSET, .tuner_addr = 0x61, .radio_addr = ADDR_UNSET, - .tda9887_conf = TDA9887_PRESENT, + .tda9887_conf = TDA9887_PRESENT | TDA9887_PORT1_ACTIVE, .mpeg = SAA7134_MPEG_DVB, .inputs = {{ .name = name_tv, @@ -2211,7 +2211,7 @@ struct saa7134_board saa7134_boards[] = { .radio_type = UNSET, .tuner_addr = 0x61, .radio_addr = ADDR_UNSET, - .tda9887_conf = TDA9887_PRESENT, + .tda9887_conf = TDA9887_PRESENT | TDA9887_PORT1_ACTIVE, .mpeg = SAA7134_MPEG_DVB, .inputs = {{ .name = name_tv, @@ -2392,7 +2392,7 @@ struct saa7134_board saa7134_boards[] = { }}, }, [SAA7134_BOARD_PINNACLE_PCTV_110i] = { - .name = "Pinnacle PCTV 110i (saa7133)", + .name = "Pinnacle PCTV 40i/50i/110i (saa7133)", .audio_clock = 0x00187de7, .tuner_type = TUNER_PHILIPS_TDA8290, .radio_type = UNSET, @@ -2407,6 +2407,10 @@ struct saa7134_board saa7134_boards[] = { },{ .name = name_comp1, .vmux = 1, + .amux = LINE2, + },{ + .name = name_comp2, + .vmux = 0, .amux = LINE2, },{ .name = name_svideo, @@ -2745,7 +2749,7 @@ struct pci_device_id saa7134_pci_tbl[] = { .vendor = PCI_VENDOR_ID_PHILIPS, .device = PCI_DEVICE_ID_PHILIPS_SAA7130, .subvendor = 0x1048, - .subdevice = 0x226b, + .subdevice = 0x226a, .driver_data = SAA7134_BOARD_ELSA_500TV, },{ .vendor = PCI_VENDOR_ID_PHILIPS, @@ -3201,6 +3205,11 @@ int saa7134_board_init1(struct saa7134_dev *dev) /* power-up tuner chip */ saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0x00040000, 0x00040000); saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x00040000, 0x00000000); + case SAA7134_BOARD_PINNACLE_300I_DVBT_PAL: + /* this turns the remote control chip off to work around a bug in it */ + saa_writeb(SAA7134_GPIO_GPMODE1, 0x80); + saa_writeb(SAA7134_GPIO_GPSTATUS1, 0x80); + break; case SAA7134_BOARD_MONSTERTV_MOBILE: /* power-up tuner chip */ saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0x00040000, 0x00040000); diff --git a/drivers/media/video/saa7134/saa7134-dvb.c b/drivers/media/video/saa7134/saa7134-dvb.c index 1a536e86..9db8e13 100644 --- a/drivers/media/video/saa7134/saa7134-dvb.c +++ b/drivers/media/video/saa7134/saa7134-dvb.c @@ -110,6 +110,7 @@ static int mt352_pinnacle_init(struct dvb_frontend* fe) mt352_write(fe, fsm_ctl_cfg, sizeof(fsm_ctl_cfg)); mt352_write(fe, scan_ctl_cfg, sizeof(scan_ctl_cfg)); mt352_write(fe, irq_cfg, sizeof(irq_cfg)); + return 0; } @@ -117,8 +118,10 @@ static int mt352_pinnacle_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params, u8* pllbuf) { - static int on = TDA9887_PRESENT | TDA9887_PORT2_INACTIVE; - static int off = TDA9887_PRESENT | TDA9887_PORT2_ACTIVE; + u8 off[] = { 0x00, 0xf1}; + u8 on[] = { 0x00, 0x71}; + struct i2c_msg msg = {.addr=0x43, .flags=0, .buf=off, .len = sizeof(off)}; + struct saa7134_dev *dev = fe->dvb->priv; struct v4l2_frequency f; @@ -126,9 +129,10 @@ static int mt352_pinnacle_pll_set(struct dvb_frontend* fe, f.tuner = 0; f.type = V4L2_TUNER_DIGITAL_TV; f.frequency = params->frequency / 1000 * 16 / 1000; - saa7134_i2c_call_clients(dev,TDA9887_SET_CONFIG,&on); + i2c_transfer(&dev->i2c_adap, &msg, 1); saa7134_i2c_call_clients(dev,VIDIOC_S_FREQUENCY,&f); - saa7134_i2c_call_clients(dev,TDA9887_SET_CONFIG,&off); + msg.buf = on; + i2c_transfer(&dev->i2c_adap, &msg, 1); pinnacle_antenna_pwr(dev, antenna_pwr); diff --git a/drivers/media/video/tda8290.c b/drivers/media/video/tda8290.c index 7b4fb28..a796a4e 100644 --- a/drivers/media/video/tda8290.c +++ b/drivers/media/video/tda8290.c @@ -580,9 +580,10 @@ int tda8290_init(struct i2c_client *c) int tda8290_probe(struct i2c_client *c) { - unsigned char soft_reset[] = { 0x00, 0x00 }; - unsigned char easy_mode_b[] = { 0x01, 0x02 }; - unsigned char easy_mode_g[] = { 0x01, 0x04 }; + unsigned char soft_reset[] = { 0x00, 0x00 }; + unsigned char easy_mode_b[] = { 0x01, 0x02 }; + unsigned char easy_mode_g[] = { 0x01, 0x04 }; + unsigned char restore_9886[] = { 0x00, 0xd6, 0x30 }; unsigned char addr_dto_lsb = 0x07; unsigned char data; @@ -599,6 +600,7 @@ int tda8290_probe(struct i2c_client *c) return 0; } } + i2c_master_send(c, restore_9886, 3); return -1; } diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c index e7ee619..b6101bf 100644 --- a/drivers/media/video/tuner-core.c +++ b/drivers/media/video/tuner-core.c @@ -713,8 +713,9 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) struct v4l2_frequency *f = arg; switch_v4l2(); - if (V4L2_TUNER_RADIO == f->type && - V4L2_TUNER_RADIO != t->mode) { + if ((V4L2_TUNER_RADIO == f->type && V4L2_TUNER_RADIO != t->mode) + || (V4L2_TUNER_DIGITAL_TV == f->type + && V4L2_TUNER_DIGITAL_TV != t->mode)) { if (set_mode (client, t, f->type, "VIDIOC_S_FREQUENCY") == EINVAL) return 0; diff --git a/drivers/media/video/videocodec.h b/drivers/media/video/videocodec.h index 156ae57..b1239ac 100644 --- a/drivers/media/video/videocodec.h +++ b/drivers/media/video/videocodec.h @@ -56,7 +56,7 @@ the slave is bound to it). Otherwise it doesn't need this functions and therfor they may not be initialized. - The other fuctions are just for convenience, as they are for shure used by + The other fuctions are just for convenience, as they are for sure used by most/all of the codecs. The last ones may be ommited, too. See the structure declaration below for more information and which data has diff --git a/drivers/media/video/zr36050.c b/drivers/media/video/zr36050.c index bd0cd28..6699725 100644 --- a/drivers/media/video/zr36050.c +++ b/drivers/media/video/zr36050.c @@ -159,7 +159,7 @@ zr36050_wait_end (struct zr36050 *ptr) while (!(zr36050_read_status1(ptr) & 0x4)) { udelay(1); - if (i++ > 200000) { // 200ms, there is for shure something wrong!!! + if (i++ > 200000) { // 200ms, there is for sure something wrong!!! dprintk(1, "%s: timout at wait_end (last status: 0x%02x)\n", ptr->name, ptr->status1); diff --git a/drivers/media/video/zr36060.c b/drivers/media/video/zr36060.c index 28fa31a..d8dd003 100644 --- a/drivers/media/video/zr36060.c +++ b/drivers/media/video/zr36060.c @@ -161,7 +161,7 @@ zr36060_wait_end (struct zr36060 *ptr) while (zr36060_read_status(ptr) & ZR060_CFSR_Busy) { udelay(1); - if (i++ > 200000) { // 200ms, there is for shure something wrong!!! + if (i++ > 200000) { // 200ms, there is for sure something wrong!!! dprintk(1, "%s: timout at wait_end (last status: 0x%02x)\n", ptr->name, ptr->status); diff --git a/drivers/media/video/zr36120_i2c.c b/drivers/media/video/zr36120_i2c.c index 6bfe84d..21fde43 100644 --- a/drivers/media/video/zr36120_i2c.c +++ b/drivers/media/video/zr36120_i2c.c @@ -65,7 +65,7 @@ void attach_inform(struct i2c_bus *bus, int id) case I2C_DRIVERID_VIDEODECODER: DEBUG(printk(CARD_INFO "decoder attached\n",CARD)); - /* fetch the capabilites of the decoder */ + /* fetch the capabilities of the decoder */ rv = i2c_control_device(&ztv->i2c, I2C_DRIVERID_VIDEODECODER, DECODER_GET_CAPABILITIES, &dc); if (rv) { DEBUG(printk(CARD_DEBUG "decoder is not V4L aware!\n",CARD)); diff --git a/drivers/mmc/au1xmmc.c b/drivers/mmc/au1xmmc.c index 227c39a..8d84b04 100644 --- a/drivers/mmc/au1xmmc.c +++ b/drivers/mmc/au1xmmc.c @@ -37,7 +37,7 @@ #include <linux/config.h> #include <linux/module.h> #include <linux/init.h> -#include <linux/device.h> +#include <linux/platform_device.h> #include <linux/mm.h> #include <linux/interrupt.h> #include <linux/dma-mapping.h> @@ -194,7 +194,7 @@ static int au1xmmc_send_command(struct au1xmmc_host *host, int wait, u32 mmccmd = (cmd->opcode << SD_CMD_CI_SHIFT); - switch (mmc_rsp_type(cmd->flags)) { + switch (mmc_resp_type(cmd)) { case MMC_RSP_R1: mmccmd |= SD_CMD_RT_1; break; @@ -740,7 +740,6 @@ static void au1xmmc_set_ios(struct mmc_host* mmc, struct mmc_ios* ios) static void au1xmmc_dma_callback(int irq, void *dev_id, struct pt_regs *regs) { struct au1xmmc_host *host = (struct au1xmmc_host *) dev_id; - u32 status; /* Avoid spurious interrupts */ @@ -887,7 +886,7 @@ struct mmc_host_ops au1xmmc_ops = { .set_ios = au1xmmc_set_ios, }; -static int au1xmmc_probe(struct device *dev) +static int __devinit au1xmmc_probe(struct platform_device *pdev) { int i, ret = 0; @@ -904,7 +903,7 @@ static int au1xmmc_probe(struct device *dev) disable_irq(AU1100_SD_IRQ); for(i = 0; i < AU1XMMC_CONTROLLER_COUNT; i++) { - struct mmc_host *mmc = mmc_alloc_host(sizeof(struct au1xmmc_host), dev); + struct mmc_host *mmc = mmc_alloc_host(sizeof(struct au1xmmc_host), &pdev->dev); struct au1xmmc_host *host = 0; if (!mmc) { @@ -967,7 +966,7 @@ static int au1xmmc_probe(struct device *dev) return 0; } -static int au1xmmc_remove(struct device *dev) +static int __devexit au1xmmc_remove(struct platform_device *pdev) { int i; @@ -997,23 +996,24 @@ static int au1xmmc_remove(struct device *dev) return 0; } -static struct device_driver au1xmmc_driver = { - .name = DRIVER_NAME, - .bus = &platform_bus_type, +static struct platform_driver au1xmmc_driver = { .probe = au1xmmc_probe, .remove = au1xmmc_remove, .suspend = NULL, - .resume = NULL + .resume = NULL, + .driver = { + .name = DRIVER_NAME, + }, }; static int __init au1xmmc_init(void) { - return driver_register(&au1xmmc_driver); + return platform_driver_register(&au1xmmc_driver); } static void __exit au1xmmc_exit(void) { - driver_unregister(&au1xmmc_driver); + platform_driver_unregister(&au1xmmc_driver); } module_init(au1xmmc_init); diff --git a/drivers/mtd/redboot.c b/drivers/mtd/redboot.c index 7b7ca5a..8815c8d 100644 --- a/drivers/mtd/redboot.c +++ b/drivers/mtd/redboot.c @@ -1,5 +1,5 @@ /* - * $Id: redboot.c,v 1.18 2005/11/07 11:14:21 gleixner Exp $ + * $Id: redboot.c,v 1.19 2005/12/01 10:03:51 dwmw2 Exp $ * * Parse RedBoot-style Flash Image System (FIS) tables and * produce a Linux partition array to match. @@ -89,8 +89,32 @@ static int parse_redboot_partitions(struct mtd_info *master, i = numslots; break; } - if (!memcmp(buf[i].name, "FIS directory", 14)) + if (!memcmp(buf[i].name, "FIS directory", 14)) { + /* This is apparently the FIS directory entry for the + * FIS directory itself. The FIS directory size is + * one erase block; if the buf[i].size field is + * swab32(erasesize) then we know we are looking at + * a byte swapped FIS directory - swap all the entries! + * (NOTE: this is 'size' not 'data_length'; size is + * the full size of the entry.) + */ + if (swab32(buf[i].size) == master->erasesize) { + int j; + for (j = 0; j < numslots && buf[j].name[0] != 0xff; ++j) { + /* The unsigned long fields were written with the + * wrong byte sex, name and pad have no byte sex. + */ + swab32s(&buf[j].flash_base); + swab32s(&buf[j].mem_base); + swab32s(&buf[j].size); + swab32s(&buf[j].entry_point); + swab32s(&buf[j].data_length); + swab32s(&buf[j].desc_cksum); + swab32s(&buf[j].file_cksum); + } + } break; + } } if (i == numslots) { /* Didn't find it */ diff --git a/drivers/net/8139cp.c b/drivers/net/8139cp.c index f822cd3..dd41049 100644 --- a/drivers/net/8139cp.c +++ b/drivers/net/8139cp.c @@ -1118,13 +1118,18 @@ err_out: return -ENOMEM; } +static void cp_init_rings_index (struct cp_private *cp) +{ + cp->rx_tail = 0; + cp->tx_head = cp->tx_tail = 0; +} + static int cp_init_rings (struct cp_private *cp) { memset(cp->tx_ring, 0, sizeof(struct cp_desc) * CP_TX_RING_SIZE); cp->tx_ring[CP_TX_RING_SIZE - 1].opts1 = cpu_to_le32(RingEnd); - cp->rx_tail = 0; - cp->tx_head = cp->tx_tail = 0; + cp_init_rings_index(cp); return cp_refill_rx (cp); } @@ -1886,30 +1891,30 @@ static int cp_suspend (struct pci_dev *pdev, pm_message_t state) spin_unlock_irqrestore (&cp->lock, flags); - if (cp->pdev && cp->wol_enabled) { - pci_save_state (cp->pdev); - cp_set_d3_state (cp); - } + pci_save_state(pdev); + pci_enable_wake(pdev, pci_choose_state(pdev, state), cp->wol_enabled); + pci_set_power_state(pdev, pci_choose_state(pdev, state)); return 0; } static int cp_resume (struct pci_dev *pdev) { - struct net_device *dev; - struct cp_private *cp; + struct net_device *dev = pci_get_drvdata (pdev); + struct cp_private *cp = netdev_priv(dev); unsigned long flags; - dev = pci_get_drvdata (pdev); - cp = netdev_priv(dev); + if (!netif_running(dev)) + return 0; netif_device_attach (dev); - - if (cp->pdev && cp->wol_enabled) { - pci_set_power_state (cp->pdev, PCI_D0); - pci_restore_state (cp->pdev); - } - + + pci_set_power_state(pdev, PCI_D0); + pci_restore_state(pdev); + pci_enable_wake(pdev, PCI_D0, 0); + + /* FIXME: sh*t may happen if the Rx ring buffer is depleted */ + cp_init_rings_index (cp); cp_init_hw (cp); netif_start_queue (dev); diff --git a/drivers/net/chelsio/espi.c b/drivers/net/chelsio/espi.c index 2306425..e824aca 100644 --- a/drivers/net/chelsio/espi.c +++ b/drivers/net/chelsio/espi.c @@ -296,9 +296,7 @@ void t1_espi_destroy(struct peespi *espi) struct peespi *t1_espi_create(adapter_t *adapter) { - struct peespi *espi = kmalloc(sizeof(*espi), GFP_KERNEL); - - memset(espi, 0, sizeof(*espi)); + struct peespi *espi = kzalloc(sizeof(*espi), GFP_KERNEL); if (espi) espi->adapter = adapter; diff --git a/drivers/net/e1000/e1000.h b/drivers/net/e1000/e1000.h index 27c7730..99baf0e 100644 --- a/drivers/net/e1000/e1000.h +++ b/drivers/net/e1000/e1000.h @@ -225,9 +225,6 @@ struct e1000_rx_ring { struct e1000_ps_page *ps_page; struct e1000_ps_page_dma *ps_page_dma; - struct sk_buff *rx_skb_top; - struct sk_buff *rx_skb_prev; - /* cpu for rx queue */ int cpu; diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index 31e3329..5b7d0f4 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -103,7 +103,7 @@ static char e1000_driver_string[] = "Intel(R) PRO/1000 Network Driver"; #else #define DRIVERNAPI "-NAPI" #endif -#define DRV_VERSION "6.3.9-k2"DRIVERNAPI +#define DRV_VERSION "6.3.9-k4"DRIVERNAPI char e1000_driver_version[] = DRV_VERSION; static char e1000_copyright[] = "Copyright (c) 1999-2005 Intel Corporation."; @@ -1635,8 +1635,6 @@ setup_rx_desc_die: rxdr->next_to_clean = 0; rxdr->next_to_use = 0; - rxdr->rx_skb_top = NULL; - rxdr->rx_skb_prev = NULL; return 0; } @@ -1713,8 +1711,23 @@ e1000_setup_rctl(struct e1000_adapter *adapter) rctl |= adapter->rx_buffer_len << 0x11; } else { rctl &= ~E1000_RCTL_SZ_4096; - rctl &= ~E1000_RCTL_BSEX; - rctl |= E1000_RCTL_SZ_2048; + rctl |= E1000_RCTL_BSEX; + switch (adapter->rx_buffer_len) { + case E1000_RXBUFFER_2048: + default: + rctl |= E1000_RCTL_SZ_2048; + rctl &= ~E1000_RCTL_BSEX; + break; + case E1000_RXBUFFER_4096: + rctl |= E1000_RCTL_SZ_4096; + break; + case E1000_RXBUFFER_8192: + rctl |= E1000_RCTL_SZ_8192; + break; + case E1000_RXBUFFER_16384: + rctl |= E1000_RCTL_SZ_16384; + break; + } } #ifndef CONFIG_E1000_DISABLE_PACKET_SPLIT @@ -2107,16 +2120,6 @@ e1000_clean_rx_ring(struct e1000_adapter *adapter, } } - /* there also may be some cached data in our adapter */ - if (rx_ring->rx_skb_top) { - dev_kfree_skb(rx_ring->rx_skb_top); - - /* rx_skb_prev will be wiped out by rx_skb_top */ - rx_ring->rx_skb_top = NULL; - rx_ring->rx_skb_prev = NULL; - } - - size = sizeof(struct e1000_buffer) * rx_ring->count; memset(rx_ring->buffer_info, 0, size); size = sizeof(struct e1000_ps_page) * rx_ring->count; @@ -3106,24 +3109,27 @@ e1000_change_mtu(struct net_device *netdev, int new_mtu) break; } - /* since the driver code now supports splitting a packet across - * multiple descriptors, most of the fifo related limitations on - * jumbo frame traffic have gone away. - * simply use 2k descriptors for everything. - * - * NOTE: dev_alloc_skb reserves 16 bytes, and typically NET_IP_ALIGN - * means we reserve 2 more, this pushes us to allocate from the next - * larger slab size - * i.e. RXBUFFER_2048 --> size-4096 slab */ - - /* recent hardware supports 1KB granularity */ + if (adapter->hw.mac_type > e1000_82547_rev_2) { - adapter->rx_buffer_len = - ((max_frame < E1000_RXBUFFER_2048) ? - max_frame : E1000_RXBUFFER_2048); + adapter->rx_buffer_len = max_frame; E1000_ROUNDUP(adapter->rx_buffer_len, 1024); - } else - adapter->rx_buffer_len = E1000_RXBUFFER_2048; + } else { + if(unlikely((adapter->hw.mac_type < e1000_82543) && + (max_frame > MAXIMUM_ETHERNET_FRAME_SIZE))) { + DPRINTK(PROBE, ERR, "Jumbo Frames not supported " + "on 82542\n"); + return -EINVAL; + } else { + if(max_frame <= E1000_RXBUFFER_2048) + adapter->rx_buffer_len = E1000_RXBUFFER_2048; + else if(max_frame <= E1000_RXBUFFER_4096) + adapter->rx_buffer_len = E1000_RXBUFFER_4096; + else if(max_frame <= E1000_RXBUFFER_8192) + adapter->rx_buffer_len = E1000_RXBUFFER_8192; + else if(max_frame <= E1000_RXBUFFER_16384) + adapter->rx_buffer_len = E1000_RXBUFFER_16384; + } + } netdev->mtu = new_mtu; @@ -3620,7 +3626,7 @@ e1000_clean_rx_irq(struct e1000_adapter *adapter, uint8_t last_byte; unsigned int i; int cleaned_count = 0; - boolean_t cleaned = FALSE, multi_descriptor = FALSE; + boolean_t cleaned = FALSE; i = rx_ring->next_to_clean; rx_desc = E1000_RX_DESC(*rx_ring, i); @@ -3652,43 +3658,12 @@ e1000_clean_rx_irq(struct e1000_adapter *adapter, length = le16_to_cpu(rx_desc->length); - skb_put(skb, length); - - if (!(status & E1000_RXD_STAT_EOP)) { - if (!rx_ring->rx_skb_top) { - rx_ring->rx_skb_top = skb; - rx_ring->rx_skb_top->len = length; - rx_ring->rx_skb_prev = skb; - } else { - if (skb_shinfo(rx_ring->rx_skb_top)->frag_list) { - rx_ring->rx_skb_prev->next = skb; - skb->prev = rx_ring->rx_skb_prev; - } else { - skb_shinfo(rx_ring->rx_skb_top)->frag_list = skb; - } - rx_ring->rx_skb_prev = skb; - rx_ring->rx_skb_top->data_len += length; - } + if (unlikely(!(status & E1000_RXD_STAT_EOP))) { + /* All receives must fit into a single buffer */ + E1000_DBG("%s: Receive packet consumed multiple" + " buffers\n", netdev->name); + dev_kfree_skb_irq(skb); goto next_desc; - } else { - if (rx_ring->rx_skb_top) { - if (skb_shinfo(rx_ring->rx_skb_top) - ->frag_list) { - rx_ring->rx_skb_prev->next = skb; - skb->prev = rx_ring->rx_skb_prev; - } else - skb_shinfo(rx_ring->rx_skb_top) - ->frag_list = skb; - - rx_ring->rx_skb_top->data_len += length; - rx_ring->rx_skb_top->len += - rx_ring->rx_skb_top->data_len; - - skb = rx_ring->rx_skb_top; - multi_descriptor = TRUE; - rx_ring->rx_skb_top = NULL; - rx_ring->rx_skb_prev = NULL; - } } if (unlikely(rx_desc->errors & E1000_RXD_ERR_FRAME_ERR_MASK)) { @@ -3712,10 +3687,7 @@ e1000_clean_rx_irq(struct e1000_adapter *adapter, * performance for small packets with large amounts * of reassembly being done in the stack */ #define E1000_CB_LENGTH 256 - if ((length < E1000_CB_LENGTH) && - !rx_ring->rx_skb_top && - /* or maybe (status & E1000_RXD_STAT_EOP) && */ - !multi_descriptor) { + if (length < E1000_CB_LENGTH) { struct sk_buff *new_skb = dev_alloc_skb(length + NET_IP_ALIGN); if (new_skb) { @@ -3729,7 +3701,8 @@ e1000_clean_rx_irq(struct e1000_adapter *adapter, skb = new_skb; skb_put(skb, length); } - } + } else + skb_put(skb, length); /* end copybreak code */ diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c index 01ddfc8..aa55813 100644 --- a/drivers/net/pcmcia/axnet_cs.c +++ b/drivers/net/pcmcia/axnet_cs.c @@ -806,6 +806,7 @@ static struct pcmcia_device_id axnet_ids[] = { PCMCIA_DEVICE_MANF_CARD(0x026f, 0x0309), PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1106), PCMCIA_DEVICE_MANF_CARD(0x8a01, 0xc1ab), + PCMCIA_DEVICE_PROD_ID12("AmbiCom,Inc.", "Fast Ethernet PC Card(AMB8110)", 0x49b020a7, 0x119cc9fc), PCMCIA_DEVICE_PROD_ID124("Fast Ethernet", "16-bit PC Card", "AX88190", 0xb4be14e3, 0x9a12eb6a, 0xab9be5ef), PCMCIA_DEVICE_PROD_ID12("ASIX", "AX88190", 0x0959823b, 0xab9be5ef), PCMCIA_DEVICE_PROD_ID12("Billionton", "LNA-100B", 0x552ab682, 0xbc3b87e1), diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index 49b597c..b7f00d6 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -4092,6 +4092,7 @@ static void s2io_set_multicast(struct net_device *dev) i++, mclist = mclist->next) { memcpy(sp->usr_addrs[i].addr, mclist->dmi_addr, ETH_ALEN); + mac_addr = 0; for (j = 0; j < ETH_ALEN; j++) { mac_addr |= mclist->dmi_addr[j]; mac_addr <<= 8; diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index ca8160d..72c1630 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -96,10 +96,6 @@ static int copybreak __read_mostly = 256; module_param(copybreak, int, 0); MODULE_PARM_DESC(copybreak, "Receive copy threshold"); -static int disable_msi = 0; -module_param(disable_msi, int, 0); -MODULE_PARM_DESC(disable_msi, "Disable Message Signaled Interrupt (MSI)"); - static const struct pci_device_id sky2_id_table[] = { { PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9000) }, { PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9E00) }, @@ -3126,61 +3122,6 @@ static void __devinit sky2_show_addr(struct net_device *dev) dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5]); } -/* Handle software interrupt used during MSI test */ -static irqreturn_t __devinit sky2_test_intr(int irq, void *dev_id, - struct pt_regs *regs) -{ - struct sky2_hw *hw = dev_id; - u32 status = sky2_read32(hw, B0_Y2_SP_ISRC2); - - if (status == 0) - return IRQ_NONE; - - if (status & Y2_IS_IRQ_SW) { - sky2_write8(hw, B0_CTST, CS_CL_SW_IRQ); - hw->msi = 1; - } - sky2_write32(hw, B0_Y2_SP_ICR, 2); - - sky2_read32(hw, B0_IMSK); - return IRQ_HANDLED; -} - -/* Test interrupt path by forcing a a software IRQ */ -static int __devinit sky2_test_msi(struct sky2_hw *hw) -{ - struct pci_dev *pdev = hw->pdev; - int i, err; - - sky2_write32(hw, B0_IMSK, Y2_IS_IRQ_SW); - - err = request_irq(pdev->irq, sky2_test_intr, SA_SHIRQ, DRV_NAME, hw); - if (err) { - printk(KERN_ERR PFX "%s: cannot assign irq %d\n", - pci_name(pdev), pdev->irq); - return err; - } - - sky2_write8(hw, B0_CTST, CS_ST_SW_IRQ); - wmb(); - - for (i = 0; i < 10; i++) { - barrier(); - if (hw->msi) - goto found; - mdelay(1); - } - - err = -EOPNOTSUPP; - sky2_write8(hw, B0_CTST, CS_CL_SW_IRQ); - found: - sky2_write32(hw, B0_IMSK, 0); - - free_irq(pdev->irq, hw); - - return err; -} - static int __devinit sky2_probe(struct pci_dev *pdev, const struct pci_device_id *ent) { @@ -3302,20 +3243,6 @@ static int __devinit sky2_probe(struct pci_dev *pdev, } } - if (!disable_msi && pci_enable_msi(pdev) == 0) { - err = sky2_test_msi(hw); - if (err == -EOPNOTSUPP) { - /* MSI test failed, go back to INTx mode */ - printk(KERN_WARNING PFX "%s: No interrupt was generated using MSI, " - "switching to INTx mode. Please report this failure to " - "the PCI maintainer and include system chipset information.\n", - pci_name(pdev)); - pci_disable_msi(pdev); - } - else if (err) - goto err_out_unregister; - } - err = request_irq(pdev->irq, sky2_intr, SA_SHIRQ | SA_SAMPLE_RANDOM, DRV_NAME, hw); if (err) { @@ -3332,8 +3259,6 @@ static int __devinit sky2_probe(struct pci_dev *pdev, return 0; err_out_unregister: - if (hw->msi) - pci_disable_msi(pdev); if (dev1) { unregister_netdev(dev1); free_netdev(dev1); @@ -3376,8 +3301,6 @@ static void __devexit sky2_remove(struct pci_dev *pdev) sky2_read8(hw, B0_CTST); free_irq(pdev->irq, hw); - if (hw->msi) - pci_disable_msi(pdev); pci_free_consistent(pdev, STATUS_LE_BYTES, hw->st_le, hw->st_dma); pci_release_regions(pdev); pci_disable_device(pdev); diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h index 3edb980..dce955c 100644 --- a/drivers/net/sky2.h +++ b/drivers/net/sky2.h @@ -1881,7 +1881,6 @@ struct sky2_hw { u32 intr_mask; int pm_cap; - int msi; u8 chip_id; u8 chip_rev; u8 copper; diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index e8e92c8..1554562 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -3532,9 +3532,23 @@ static inline int tg3_4g_overflow_test(dma_addr_t mapping, int len) (base + len + 8 < base)); } +/* Test for DMA addresses > 40-bit */ +static inline int tg3_40bit_overflow_test(struct tg3 *tp, dma_addr_t mapping, + int len) +{ +#if defined(CONFIG_HIGHMEM) && (BITS_PER_LONG == 64) + if (tp->tg3_flags2 & TG3_FLG2_5780_CLASS) + return (((u64) mapping + len) > DMA_40BIT_MASK); + return 0; +#else + return 0; +#endif +} + static void tg3_set_txd(struct tg3 *, int, dma_addr_t, int, u32, u32); -static int tigon3_4gb_hwbug_workaround(struct tg3 *tp, struct sk_buff *skb, +/* Workaround 4GB and 40-bit hardware DMA bugs. */ +static int tigon3_dma_hwbug_workaround(struct tg3 *tp, struct sk_buff *skb, u32 last_plus_one, u32 *start, u32 base_flags, u32 mss) { @@ -3742,6 +3756,9 @@ static int tg3_start_xmit(struct sk_buff *skb, struct net_device *dev) if (tg3_4g_overflow_test(mapping, len)) would_hit_hwbug = 1; + if (tg3_40bit_overflow_test(tp, mapping, len)) + would_hit_hwbug = 1; + if (tp->tg3_flags2 & TG3_FLG2_HW_TSO) tg3_set_txd(tp, entry, mapping, len, base_flags, (i == last)|(mss << 1)); @@ -3763,7 +3780,7 @@ static int tg3_start_xmit(struct sk_buff *skb, struct net_device *dev) /* If the workaround fails due to memory/mapping * failure, silently drop this packet. */ - if (tigon3_4gb_hwbug_workaround(tp, skb, last_plus_one, + if (tigon3_dma_hwbug_workaround(tp, skb, last_plus_one, &start, base_flags, mss)) goto out_unlock; @@ -10608,8 +10625,9 @@ static int __devinit tg3_init_one(struct pci_dev *pdev, unsigned long tg3reg_base, tg3reg_len; struct net_device *dev; struct tg3 *tp; - int i, err, pci_using_dac, pm_cap; + int i, err, pm_cap; char str[40]; + u64 dma_mask, persist_dma_mask; if (tg3_version_printed++ == 0) printk(KERN_INFO "%s", version); @@ -10646,26 +10664,6 @@ static int __devinit tg3_init_one(struct pci_dev *pdev, goto err_out_free_res; } - /* Configure DMA attributes. */ - err = pci_set_dma_mask(pdev, DMA_64BIT_MASK); - if (!err) { - pci_using_dac = 1; - err = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK); - if (err < 0) { - printk(KERN_ERR PFX "Unable to obtain 64 bit DMA " - "for consistent allocations\n"); - goto err_out_free_res; - } - } else { - err = pci_set_dma_mask(pdev, DMA_32BIT_MASK); - if (err) { - printk(KERN_ERR PFX "No usable DMA configuration, " - "aborting.\n"); - goto err_out_free_res; - } - pci_using_dac = 0; - } - tg3reg_base = pci_resource_start(pdev, 0); tg3reg_len = pci_resource_len(pdev, 0); @@ -10679,8 +10677,6 @@ static int __devinit tg3_init_one(struct pci_dev *pdev, SET_MODULE_OWNER(dev); SET_NETDEV_DEV(dev, &pdev->dev); - if (pci_using_dac) - dev->features |= NETIF_F_HIGHDMA; dev->features |= NETIF_F_LLTX; #if TG3_VLAN_TAG_USED dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX; @@ -10765,6 +10761,44 @@ static int __devinit tg3_init_one(struct pci_dev *pdev, goto err_out_iounmap; } + /* 5714, 5715 and 5780 cannot support DMA addresses > 40-bit. + * On 64-bit systems with IOMMU, use 40-bit dma_mask. + * On 64-bit systems without IOMMU, use 64-bit dma_mask and + * do DMA address check in tg3_start_xmit(). + */ + if (tp->tg3_flags2 & TG3_FLG2_5780_CLASS) { + persist_dma_mask = dma_mask = DMA_40BIT_MASK; +#ifdef CONFIG_HIGHMEM + dma_mask = DMA_64BIT_MASK; +#endif + } else if (tp->tg3_flags2 & TG3_FLG2_IS_5788) + persist_dma_mask = dma_mask = DMA_32BIT_MASK; + else + persist_dma_mask = dma_mask = DMA_64BIT_MASK; + + /* Configure DMA attributes. */ + if (dma_mask > DMA_32BIT_MASK) { + err = pci_set_dma_mask(pdev, dma_mask); + if (!err) { + dev->features |= NETIF_F_HIGHDMA; + err = pci_set_consistent_dma_mask(pdev, + persist_dma_mask); + if (err < 0) { + printk(KERN_ERR PFX "Unable to obtain 64 bit " + "DMA for consistent allocations\n"); + goto err_out_iounmap; + } + } + } + if (err || dma_mask == DMA_32BIT_MASK) { + err = pci_set_dma_mask(pdev, DMA_32BIT_MASK); + if (err) { + printk(KERN_ERR PFX "No usable DMA configuration, " + "aborting.\n"); + goto err_out_iounmap; + } + } + tg3_init_bufmgr_config(tp); #if TG3_TSO_SUPPORT != 0 @@ -10833,9 +10867,6 @@ static int __devinit tg3_init_one(struct pci_dev *pdev, } else tp->tg3_flags &= ~TG3_FLAG_RX_CHECKSUMS; - if (tp->tg3_flags2 & TG3_FLG2_IS_5788) - dev->features &= ~NETIF_F_HIGHDMA; - /* flow control autonegotiation is default behavior */ tp->tg3_flags |= TG3_FLAG_PAUSE_AUTONEG; diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c index c2d5907..ed1f837 100644 --- a/drivers/net/via-velocity.c +++ b/drivers/net/via-velocity.c @@ -1106,6 +1106,9 @@ static void velocity_free_rd_ring(struct velocity_info *vptr) for (i = 0; i < vptr->options.numrx; i++) { struct velocity_rd_info *rd_info = &(vptr->rd_info[i]); + struct rx_desc *rd = vptr->rd_ring + i; + + memset(rd, 0, sizeof(*rd)); if (!rd_info->skb) continue; diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c index 8bc0b52..f8f4503 100644 --- a/drivers/net/wireless/hostap/hostap_cs.c +++ b/drivers/net/wireless/hostap/hostap_cs.c @@ -877,7 +877,6 @@ static struct pcmcia_device_id hostap_cs_ids[] = { PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0777), PCMCIA_DEVICE_MANF_CARD(0x0126, 0x8000), PCMCIA_DEVICE_MANF_CARD(0x0138, 0x0002), - PCMCIA_DEVICE_MANF_CARD(0x0156, 0x0002), PCMCIA_DEVICE_MANF_CARD(0x0250, 0x0002), PCMCIA_DEVICE_MANF_CARD(0x026f, 0x030b), PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1612), @@ -891,6 +890,10 @@ static struct pcmcia_device_id hostap_cs_ids[] = { PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0002), PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0005), PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0010), + PCMCIA_DEVICE_MANF_CARD_PROD_ID1(0x0156, 0x0002, "INTERSIL", + 0x74c5e40d), + PCMCIA_DEVICE_MANF_CARD_PROD_ID1(0x0156, 0x0002, "Intersil", + 0x4b801a17), PCMCIA_MFC_DEVICE_PROD_ID12(0, "SanDisk", "ConnectPlus", 0x7a954bd9, 0x74be00c6), PCMCIA_DEVICE_PROD_ID1234( diff --git a/drivers/parport/parport_serial.c b/drivers/parport/parport_serial.c index 166de35..1084525 100644 --- a/drivers/parport/parport_serial.c +++ b/drivers/parport/parport_serial.c @@ -312,8 +312,7 @@ static int __devinit parport_register (struct pci_dev *dev, { struct parport_pc_pci *card; struct parport_serial_private *priv = pci_get_drvdata (dev); - int i = id->driver_data, n; - int success = 0; + int n, success = 0; priv->par = cards[id->driver_data]; card = &priv->par; @@ -344,10 +343,8 @@ static int __devinit parport_register (struct pci_dev *dev, "hi" as an offset (see SYBA def.) */ /* TODO: test if sharing interrupts works */ - printk (KERN_DEBUG "PCI parallel port detected: %04x:%04x, " - "I/O at %#lx(%#lx)\n", - parport_serial_pci_tbl[i].vendor, - parport_serial_pci_tbl[i].device, io_lo, io_hi); + dev_dbg(&dev->dev, "PCI parallel port detected: I/O at " + "%#lx(%#lx)\n", io_lo, io_hi); port = parport_pc_probe_port (io_lo, io_hi, PARPORT_IRQ_NONE, PARPORT_DMA_NONE, dev); if (port) { @@ -359,7 +356,7 @@ static int __devinit parport_register (struct pci_dev *dev, if (card->postinit_hook) card->postinit_hook (dev, card, !success); - return success ? 0 : 1; + return 0; } static int __devinit parport_serial_pci_probe (struct pci_dev *dev, diff --git a/drivers/pcmcia/ds.c b/drivers/pcmcia/ds.c index 0a424a4..54ad93d 100644 --- a/drivers/pcmcia/ds.c +++ b/drivers/pcmcia/ds.c @@ -352,11 +352,20 @@ static void pcmcia_release_dev(struct device *dev) kfree(p_dev); } +static void pcmcia_add_pseudo_device(struct pcmcia_socket *s) +{ + if (!s->pcmcia_state.device_add_pending) { + s->pcmcia_state.device_add_pending = 1; + schedule_work(&s->device_add); + } + return; +} static int pcmcia_device_probe(struct device * dev) { struct pcmcia_device *p_dev; struct pcmcia_driver *p_drv; + struct pcmcia_device_id *did; struct pcmcia_socket *s; int ret = 0; @@ -392,6 +401,19 @@ static int pcmcia_device_probe(struct device * dev) } ret = p_drv->probe(p_dev); + if (ret) + goto put_module; + + /* handle pseudo multifunction devices: + * there are at most two pseudo multifunction devices. + * if we're matching against the first, schedule a + * call which will then check whether there are two + * pseudo devices, and if not, add the second one. + */ + did = (struct pcmcia_device_id *) p_dev->dev.driver_data; + if ((did->match_flags & PCMCIA_DEV_ID_MATCH_DEVICE_NO) && + (p_dev->socket->device_count == 1) && (p_dev->device_no == 0)) + pcmcia_add_pseudo_device(p_dev->socket); put_module: if (ret) @@ -660,15 +682,6 @@ static void pcmcia_delayed_add_pseudo_device(void *data) s->pcmcia_state.device_add_pending = 0; } -static inline void pcmcia_add_pseudo_device(struct pcmcia_socket *s) -{ - if (!s->pcmcia_state.device_add_pending) { - s->pcmcia_state.device_add_pending = 1; - schedule_work(&s->device_add); - } - return; -} - static int pcmcia_requery(struct device *dev, void * _data) { struct pcmcia_device *p_dev = to_pcmcia_dev(dev); @@ -755,15 +768,6 @@ static inline int pcmcia_devmatch(struct pcmcia_device *dev, } if (did->match_flags & PCMCIA_DEV_ID_MATCH_DEVICE_NO) { - /* handle pseudo multifunction devices: - * there are at most two pseudo multifunction devices. - * if we're matching against the first, schedule a - * call which will then check whether there are two - * pseudo devices, and if not, add the second one. - */ - if (dev->device_no == 0) - pcmcia_add_pseudo_device(dev->socket); - if (dev->device_no != did->device_no) return 0; } diff --git a/drivers/pnp/card.c b/drivers/pnp/card.c index aaa568a..b68eef2 100644 --- a/drivers/pnp/card.c +++ b/drivers/pnp/card.c @@ -303,13 +303,11 @@ found: down_write(&dev->dev.bus->subsys.rwsem); dev->card_link = clink; dev->dev.driver = &drv->link.driver; - if (drv->link.driver.probe) { - if (drv->link.driver.probe(&dev->dev)) { - dev->dev.driver = NULL; - dev->card_link = NULL; - up_write(&dev->dev.bus->subsys.rwsem); - return NULL; - } + if (pnp_bus_type.probe(&dev->dev)) { + dev->dev.driver = NULL; + dev->card_link = NULL; + up_write(&dev->dev.bus->subsys.rwsem); + return NULL; } device_bind_driver(&dev->dev); up_write(&dev->dev.bus->subsys.rwsem); diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c index af1d5b4..33157c8 100644 --- a/drivers/s390/block/dasd.c +++ b/drivers/s390/block/dasd.c @@ -215,9 +215,10 @@ dasd_state_basic_to_known(struct dasd_device * device) * interrupt for this detection ccw uses the kernel event daemon to * trigger the call to dasd_change_state. All this is done in the * discipline code, see dasd_eckd.c. - * After the analysis ccw is done (do_analysis returned 0 or error) - * the block device is setup. Either a fake disk is added to allow - * formatting or a proper device request queue is created. + * After the analysis ccw is done (do_analysis returned 0) the block + * device is setup. + * In case the analysis returns an error, the device setup is stopped + * (a fake disk was already added to allow formatting). */ static inline int dasd_state_basic_to_ready(struct dasd_device * device) @@ -227,13 +228,19 @@ dasd_state_basic_to_ready(struct dasd_device * device) rc = 0; if (device->discipline->do_analysis != NULL) rc = device->discipline->do_analysis(device); - if (rc) + if (rc) { + if (rc != -EAGAIN) + device->state = DASD_STATE_UNFMT; return rc; + } + /* make disk known with correct capacity */ dasd_setup_queue(device); + set_capacity(device->gdp, device->blocks << device->s2b_shift); device->state = DASD_STATE_READY; - if (dasd_scan_partitions(device) != 0) + rc = dasd_scan_partitions(device); + if (rc) device->state = DASD_STATE_BASIC; - return 0; + return rc; } /* @@ -254,6 +261,15 @@ dasd_state_ready_to_basic(struct dasd_device * device) } /* + * Back to basic. + */ +static inline void +dasd_state_unfmt_to_basic(struct dasd_device * device) +{ + device->state = DASD_STATE_BASIC; +} + +/* * Make the device online and schedule the bottom half to start * the requeueing of requests from the linux request queue to the * ccw queue. @@ -319,8 +335,12 @@ dasd_decrease_state(struct dasd_device *device) if (device->state == DASD_STATE_READY && device->target <= DASD_STATE_BASIC) dasd_state_ready_to_basic(device); - - if (device->state == DASD_STATE_BASIC && + + if (device->state == DASD_STATE_UNFMT && + device->target <= DASD_STATE_BASIC) + dasd_state_unfmt_to_basic(device); + + if (device->state == DASD_STATE_BASIC && device->target <= DASD_STATE_KNOWN) dasd_state_basic_to_known(device); @@ -1722,7 +1742,7 @@ dasd_open(struct inode *inp, struct file *filp) goto out; } - if (device->state < DASD_STATE_BASIC) { + if (device->state <= DASD_STATE_BASIC) { DBF_DEV_EVENT(DBF_ERR, device, " %s", " Cannot open unrecognized device"); rc = -ENODEV; diff --git a/drivers/s390/block/dasd_genhd.c b/drivers/s390/block/dasd_genhd.c index 65dc844..fce2835 100644 --- a/drivers/s390/block/dasd_genhd.c +++ b/drivers/s390/block/dasd_genhd.c @@ -100,8 +100,6 @@ dasd_scan_partitions(struct dasd_device * device) { struct block_device *bdev; - /* Make the disk known. */ - set_capacity(device->gdp, device->blocks << device->s2b_shift); bdev = bdget_disk(device->gdp, 0); if (!bdev || blkdev_get(bdev, FMODE_READ, 1) < 0) return -ENODEV; diff --git a/drivers/s390/block/dasd_int.h b/drivers/s390/block/dasd_int.h index 0592354..7cb0b9e 100644 --- a/drivers/s390/block/dasd_int.h +++ b/drivers/s390/block/dasd_int.h @@ -26,7 +26,7 @@ * new: the dasd_device structure is allocated. * known: the discipline for the device is identified. * basic: the device can do basic i/o. - * accept: the device is analysed (format is known). + * unfmt: the device could not be analyzed (format is unknown). * ready: partition detection is done and the device is can do block io. * online: the device accepts requests from the block device queue. * @@ -47,8 +47,9 @@ #define DASD_STATE_NEW 0 #define DASD_STATE_KNOWN 1 #define DASD_STATE_BASIC 2 -#define DASD_STATE_READY 3 -#define DASD_STATE_ONLINE 4 +#define DASD_STATE_UNFMT 3 +#define DASD_STATE_READY 4 +#define DASD_STATE_ONLINE 5 #include <linux/module.h> #include <linux/wait.h> diff --git a/drivers/s390/block/dasd_proc.c b/drivers/s390/block/dasd_proc.c index 2d5da3c..4c1acc8 100644 --- a/drivers/s390/block/dasd_proc.c +++ b/drivers/s390/block/dasd_proc.c @@ -93,6 +93,9 @@ dasd_devices_show(struct seq_file *m, void *v) case DASD_STATE_BASIC: seq_printf(m, "basic"); break; + case DASD_STATE_UNFMT: + seq_printf(m, "unnformatted"); + break; case DASD_STATE_READY: case DASD_STATE_ONLINE: seq_printf(m, "active "); diff --git a/drivers/s390/cio/chsc.c b/drivers/s390/cio/chsc.c index 8cf9905..f4183d6 100644 --- a/drivers/s390/cio/chsc.c +++ b/drivers/s390/cio/chsc.c @@ -1115,6 +1115,9 @@ chsc_enable_facility(int operation_code) goto out; } switch (sda_area->response.code) { + case 0x0001: /* everything ok */ + ret = 0; + break; case 0x0003: /* invalid request block */ case 0x0007: ret = -EINVAL; @@ -1123,6 +1126,8 @@ chsc_enable_facility(int operation_code) case 0x0101: /* facility not provided */ ret = -EOPNOTSUPP; break; + default: /* something went wrong */ + ret = -EIO; } out: free_page((unsigned long)sda_area); diff --git a/drivers/s390/net/smsgiucv.c b/drivers/s390/net/smsgiucv.c index d6469ba..72118ee 100644 --- a/drivers/s390/net/smsgiucv.c +++ b/drivers/s390/net/smsgiucv.c @@ -168,7 +168,7 @@ smsg_init(void) driver_unregister(&smsg_driver); return -EIO; /* better errno ? */ } - rc = iucv_connect (&smsg_pathid, 1, 0, "*MSG ", 0, 0, 0, 0, + rc = iucv_connect (&smsg_pathid, 255, 0, "*MSG ", 0, 0, 0, 0, smsg_handle, 0); if (rc) { printk(KERN_ERR "SMSGIUCV: failed to connect to *MSG"); diff --git a/drivers/scsi/aha152x.c b/drivers/scsi/aha152x.c index cb2ee25..531a1f9 100644 --- a/drivers/scsi/aha152x.c +++ b/drivers/scsi/aha152x.c @@ -1260,16 +1260,15 @@ static void free_hard_reset_SCs(struct Scsi_Host *shpnt, Scsi_Cmnd **SCs) * Reset the bus * */ -static int aha152x_bus_reset(Scsi_Cmnd *SCpnt) +static int aha152x_bus_reset_host(struct Scsi_Host *shpnt) { - struct Scsi_Host *shpnt = SCpnt->device->host; unsigned long flags; DO_LOCK(flags); #if defined(AHA152X_DEBUG) if(HOSTDATA(shpnt)->debug & debug_eh) { - printk(DEBUG_LEAD "aha152x_bus_reset(%p)", CMDINFO(SCpnt), SCpnt); + printk(KERN_DEBUG "scsi%d: bus reset", shpnt->host_no); show_queues(shpnt); } #endif @@ -1277,14 +1276,14 @@ static int aha152x_bus_reset(Scsi_Cmnd *SCpnt) free_hard_reset_SCs(shpnt, &ISSUE_SC); free_hard_reset_SCs(shpnt, &DISCONNECTED_SC); - DPRINTK(debug_eh, DEBUG_LEAD "resetting bus\n", CMDINFO(SCpnt)); + DPRINTK(debug_eh, KERN_DEBUG "scsi%d: resetting bus\n", shpnt->host_no); SETPORT(SCSISEQ, SCSIRSTO); mdelay(256); SETPORT(SCSISEQ, 0); mdelay(DELAY); - DPRINTK(debug_eh, DEBUG_LEAD "bus resetted\n", CMDINFO(SCpnt)); + DPRINTK(debug_eh, KERN_DEBUG "scsi%d: bus resetted\n", shpnt->host_no); setup_expected_interrupts(shpnt); if(HOSTDATA(shpnt)->commands==0) @@ -1295,6 +1294,14 @@ static int aha152x_bus_reset(Scsi_Cmnd *SCpnt) return SUCCESS; } +/* + * Reset the bus + * + */ +static int aha152x_bus_reset(Scsi_Cmnd *SCpnt) +{ + return aha152x_bus_reset_host(SCpnt->device->host); +} /* * Restore default values to the AIC-6260 registers and reset the fifos @@ -1337,23 +1344,28 @@ static void reset_ports(struct Scsi_Host *shpnt) * Reset the host (bus and controller) * */ -int aha152x_host_reset(Scsi_Cmnd * SCpnt) +int aha152x_host_reset_host(struct Scsi_Host *shpnt) { -#if defined(AHA152X_DEBUG) - struct Scsi_Host *shpnt = SCpnt->device->host; -#endif - - DPRINTK(debug_eh, DEBUG_LEAD "aha152x_host_reset(%p)\n", CMDINFO(SCpnt), SCpnt); + DPRINTK(debug_eh, KERN_DEBUG "scsi%d: host reset\n", shpnt->host_no); - aha152x_bus_reset(SCpnt); + aha152x_bus_reset_host(shpnt); - DPRINTK(debug_eh, DEBUG_LEAD "resetting ports\n", CMDINFO(SCpnt)); - reset_ports(SCpnt->device->host); + DPRINTK(debug_eh, KERN_DEBUG "scsi%d: resetting ports\n", shpnt->host_no); + reset_ports(shpnt); return SUCCESS; } /* + * Reset the host (bus and controller) + * + */ +static int aha152x_host_reset(Scsi_Cmnd *SCpnt) +{ + return aha152x_host_reset_host(SCpnt->device->host); +} + +/* * Return the "logical geometry" * */ @@ -1431,22 +1443,18 @@ static void run(void) { int i; for (i = 0; i<ARRAY_SIZE(aha152x_host); i++) { - struct Scsi_Host *shpnt = aha152x_host[i]; - if (shpnt && HOSTDATA(shpnt)->service) { - HOSTDATA(shpnt)->service=0; - is_complete(shpnt); - } + is_complete(aha152x_host[i]); } } /* - * Interrupts handler + * Interrupt handler * */ - static irqreturn_t intr(int irqno, void *dev_id, struct pt_regs *regs) { struct Scsi_Host *shpnt = lookup_irq(irqno); + unsigned long flags; unsigned char rev, dmacntrl0; if (!shpnt) { @@ -1472,23 +1480,23 @@ static irqreturn_t intr(int irqno, void *dev_id, struct pt_regs *regs) if ((rev == 0xFF) && (dmacntrl0 == 0xFF)) return IRQ_NONE; + if( TESTLO(DMASTAT, INTSTAT) ) + return IRQ_NONE; + /* no more interrupts from the controller, while we're busy. INTEN is restored by the BH handler */ CLRBITS(DMACNTRL0, INTEN); -#if 0 - /* check if there is already something to be - serviced; should not happen */ - if(HOSTDATA(shpnt)->service) { - printk(KERN_ERR "aha152x%d: lost interrupt (%d)\n", HOSTNO, HOSTDATA(shpnt)->service); - show_queues(shpnt); + DO_LOCK(flags); + if( HOSTDATA(shpnt)->service==0 ) { + HOSTDATA(shpnt)->service=1; + + /* Poke the BH handler */ + INIT_WORK(&aha152x_tq, (void *) run, NULL); + schedule_work(&aha152x_tq); } -#endif - - /* Poke the BH handler */ - HOSTDATA(shpnt)->service++; - INIT_WORK(&aha152x_tq, (void *) run, NULL); - schedule_work(&aha152x_tq); + DO_UNLOCK(flags); + return IRQ_HANDLED; } @@ -2527,7 +2535,18 @@ static void is_complete(struct Scsi_Host *shpnt) unsigned long flags; int pending; + if(!shpnt) + return; + DO_LOCK(flags); + + if( HOSTDATA(shpnt)->service==0 ) { + DO_UNLOCK(flags); + return; + } + + HOSTDATA(shpnt)->service = 0; + if(HOSTDATA(shpnt)->in_intr) { DO_UNLOCK(flags); /* aha152x_error never returns.. */ diff --git a/drivers/scsi/aha152x.h b/drivers/scsi/aha152x.h index d277613..d2add24 100644 --- a/drivers/scsi/aha152x.h +++ b/drivers/scsi/aha152x.h @@ -332,6 +332,6 @@ struct aha152x_setup { struct Scsi_Host *aha152x_probe_one(struct aha152x_setup *); void aha152x_release(struct Scsi_Host *); -int aha152x_host_reset(Scsi_Cmnd *); +int aha152x_host_reset_host(struct Scsi_Host *); #endif /* _AHA152X_H */ diff --git a/drivers/scsi/jazz_esp.c b/drivers/scsi/jazz_esp.c index 23728d1..fcd304e 100644 --- a/drivers/scsi/jazz_esp.c +++ b/drivers/scsi/jazz_esp.c @@ -65,27 +65,6 @@ static int jazz_esp_release(struct Scsi_Host *shost) return 0; } -static struct scsi_host_template driver_template = { - .proc_name = "jazz_esp", - .proc_info = &esp_proc_info, - .name = "ESP 100/100a/200", - .detect = jazz_esp_detect, - .slave_alloc = esp_slave_alloc, - .slave_destroy = esp_slave_destroy, - .release = jazz_esp_release, - .info = esp_info, - .queuecommand = esp_queue, - .eh_abort_handler = esp_abort, - .eh_bus_reset_handler = esp_reset, - .can_queue = 7, - .this_id = 7, - .sg_tablesize = SG_ALL, - .cmd_per_lun = 1, - .use_clustering = DISABLE_CLUSTERING, -}; - -#include "scsi_module.c" - /***************************************************************** Detection */ static int jazz_esp_detect(struct scsi_host_template *tpnt) { diff --git a/drivers/scsi/megaraid/megaraid_sas.c b/drivers/scsi/megaraid/megaraid_sas.c index 7de267e..4f39dd0 100644 --- a/drivers/scsi/megaraid/megaraid_sas.c +++ b/drivers/scsi/megaraid/megaraid_sas.c @@ -793,6 +793,20 @@ megasas_queue_command(struct scsi_cmnd *scmd, void (*done) (struct scsi_cmnd *)) return 0; } +static int megasas_slave_configure(struct scsi_device *sdev) +{ + /* + * Don't export physical disk devices to the disk driver. + * + * FIXME: Currently we don't export them to the midlayer at all. + * That will be fixed once LSI engineers have audited the + * firmware for possible issues. + */ + if (sdev->channel < MEGASAS_MAX_PD_CHANNELS && sdev->type == TYPE_DISK) + return -ENXIO; + return 0; +} + /** * megasas_wait_for_outstanding - Wait for all outstanding cmds * @instance: Adapter soft state @@ -943,6 +957,7 @@ static struct scsi_host_template megasas_template = { .module = THIS_MODULE, .name = "LSI Logic SAS based MegaRAID driver", .proc_name = "megaraid_sas", + .slave_configure = megasas_slave_configure, .queuecommand = megasas_queue_command, .eh_device_reset_handler = megasas_reset_device, .eh_bus_reset_handler = megasas_reset_bus_host, @@ -1071,20 +1086,6 @@ megasas_complete_cmd(struct megasas_instance *instance, struct megasas_cmd *cmd, break; } - /* - * Don't export physical disk devices to mid-layer. - */ - if (!MEGASAS_IS_LOGICAL(cmd->scmd) && - (hdr->cmd_status == MFI_STAT_OK) && - (cmd->scmd->cmnd[0] == INQUIRY)) { - - if (((*(u8 *) cmd->scmd->request_buffer) & 0x1F) == - TYPE_DISK) { - cmd->scmd->result = DID_BAD_TARGET << 16; - exception = 1; - } - } - case MFI_CMD_LD_READ: case MFI_CMD_LD_WRITE: diff --git a/drivers/scsi/pcmcia/aha152x_stub.c b/drivers/scsi/pcmcia/aha152x_stub.c index 0c9edb7..5609847 100644 --- a/drivers/scsi/pcmcia/aha152x_stub.c +++ b/drivers/scsi/pcmcia/aha152x_stub.c @@ -275,10 +275,8 @@ static int aha152x_resume(struct pcmcia_device *dev) link->state &= ~DEV_SUSPEND; if (link->state & DEV_CONFIG) { - Scsi_Cmnd tmp; pcmcia_request_configuration(link->handle, &link->conf); - tmp.device->host = info->host; - aha152x_host_reset(&tmp); + aha152x_host_reset_host(info->host); } return 0; diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c index 5cc97b7..ff82ccf 100644 --- a/drivers/scsi/scsi_error.c +++ b/drivers/scsi/scsi_error.c @@ -1308,7 +1308,7 @@ int scsi_decide_disposition(struct scsi_cmnd *scmd) * the request was not marked fast fail. Note that above, * even if the request is marked fast fail, we still requeue * for queue congestion conditions (QUEUE_FULL or BUSY) */ - if ((++scmd->retries) < scmd->allowed + if ((++scmd->retries) <= scmd->allowed && !blk_noretry_request(scmd->request)) { return NEEDS_RETRY; } else { @@ -1433,7 +1433,7 @@ static void scsi_eh_flush_done_q(struct list_head *done_q) list_del_init(&scmd->eh_entry); if (scsi_device_online(scmd->device) && !blk_noretry_request(scmd->request) && - (++scmd->retries < scmd->allowed)) { + (++scmd->retries <= scmd->allowed)) { SCSI_LOG_ERROR_RECOVERY(3, printk("%s: flush" " retry cmd: %p\n", current->comm, diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index 4362dcd..701a328 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -1498,7 +1498,7 @@ static void scsi_kill_request(struct request *req, request_queue_t *q) static void scsi_softirq_done(struct request *rq) { struct scsi_cmnd *cmd = rq->completion_data; - unsigned long wait_for = cmd->allowed * cmd->timeout_per_command; + unsigned long wait_for = (cmd->allowed + 1) * cmd->timeout_per_command; int disposition; INIT_LIST_HEAD(&cmd->eh_entry); diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c index 5acb83c..f9ecc3d 100644 --- a/drivers/scsi/scsi_scan.c +++ b/drivers/scsi/scsi_scan.c @@ -752,8 +752,20 @@ static int scsi_add_lun(struct scsi_device *sdev, char *inq_result, int *bflags) transport_configure_device(&sdev->sdev_gendev); - if (sdev->host->hostt->slave_configure) - sdev->host->hostt->slave_configure(sdev); + if (sdev->host->hostt->slave_configure) { + int ret = sdev->host->hostt->slave_configure(sdev); + if (ret) { + /* + * if LLDD reports slave not present, don't clutter + * console with alloc failure messages + */ + if (ret != -ENXIO) { + sdev_printk(KERN_ERR, sdev, + "failed to configure device\n"); + } + return SCSI_SCAN_NO_RESPONSE; + } + } /* * Ok, the device is now all set up, we can diff --git a/drivers/scsi/scsi_transport_fc.c b/drivers/scsi/scsi_transport_fc.c index f2c9acf..929032e 100644 --- a/drivers/scsi/scsi_transport_fc.c +++ b/drivers/scsi/scsi_transport_fc.c @@ -1498,8 +1498,7 @@ fc_remote_port_add(struct Scsi_Host *shost, int channel, } /* Search the bindings array */ - if (likely((ids->roles & FC_RPORT_ROLE_FCP_TARGET) && - (fc_host_tgtid_bind_type(shost) != FC_TGTID_BIND_NONE))) { + if (fc_host_tgtid_bind_type(shost) != FC_TGTID_BIND_NONE) { /* search for a matching consistent binding */ diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c index 2a54753..5a0a193 100644 --- a/drivers/scsi/sg.c +++ b/drivers/scsi/sg.c @@ -2162,7 +2162,7 @@ sg_link_reserve(Sg_fd * sfp, Sg_request * srp, int size) srp->res_used = 1; SCSI_LOG_TIMEOUT(4, printk("sg_link_reserve: size=%d\n", size)); - rem = size = (size + 1) & (~1); /* round to even for aha1542 */ + rem = size; for (k = 0; k < rsv_schp->k_use_sg; ++k, ++sg) { num = sg->length; diff --git a/drivers/scsi/sr_ioctl.c b/drivers/scsi/sr_ioctl.c index 5d02ff4..b65462f 100644 --- a/drivers/scsi/sr_ioctl.c +++ b/drivers/scsi/sr_ioctl.c @@ -192,7 +192,7 @@ int sr_do_ioctl(Scsi_CD *cd, struct packet_command *cgc) SDev = cd->device; if (!sense) { - sense = kmalloc(sizeof(*sense), GFP_KERNEL); + sense = kmalloc(SCSI_SENSE_BUFFERSIZE, GFP_KERNEL); if (!sense) { err = -ENOMEM; goto out; diff --git a/drivers/scsi/sym53c8xx_2/sym_hipd.c b/drivers/scsi/sym53c8xx_2/sym_hipd.c index f4854c3..2627000 100644 --- a/drivers/scsi/sym53c8xx_2/sym_hipd.c +++ b/drivers/scsi/sym53c8xx_2/sym_hipd.c @@ -919,6 +919,8 @@ static int sym_prepare_setting(struct Scsi_Host *shost, struct sym_hcb *np, stru tp->usrflags |= (SYM_DISC_ENABLED | SYM_TAGS_ENABLED); tp->usrtags = SYM_SETUP_MAX_TAG; + tp->usr_width = np->maxwide; + tp->usr_period = 9; sym_nvram_setup_target(tp, i, nvram); diff --git a/drivers/serial/ip22zilog.c b/drivers/serial/ip22zilog.c index 419dd3c..193722d 100644 --- a/drivers/serial/ip22zilog.c +++ b/drivers/serial/ip22zilog.c @@ -420,10 +420,8 @@ static void ip22zilog_transmit_chars(struct uart_ip22zilog_port *up, if (up->port.info == NULL) goto ack_tx_int; xmit = &up->port.info->xmit; - if (uart_circ_empty(xmit)) { - uart_write_wakeup(&up->port); + if (uart_circ_empty(xmit)) goto ack_tx_int; - } if (uart_tx_stopped(&up->port)) goto ack_tx_int; diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c index 95fb493..cc1faa3 100644 --- a/drivers/serial/serial_core.c +++ b/drivers/serial/serial_core.c @@ -71,6 +71,11 @@ static void uart_change_pm(struct uart_state *state, int pm_state); void uart_write_wakeup(struct uart_port *port) { struct uart_info *info = port->info; + /* + * This means you called this function _after_ the port was + * closed. No cookie for you. + */ + BUG_ON(!info); tasklet_schedule(&info->tlet); } @@ -471,14 +476,26 @@ static void uart_flush_chars(struct tty_struct *tty) } static int -uart_write(struct tty_struct *tty, const unsigned char * buf, int count) +uart_write(struct tty_struct *tty, const unsigned char *buf, int count) { struct uart_state *state = tty->driver_data; - struct uart_port *port = state->port; - struct circ_buf *circ = &state->info->xmit; + struct uart_port *port; + struct circ_buf *circ; unsigned long flags; int c, ret = 0; + /* + * This means you called this function _after_ the port was + * closed. No cookie for you. + */ + if (!state || !state->info) { + WARN_ON(1); + return -EL3HLT; + } + + port = state->port; + circ = &state->info->xmit; + if (!circ->buf) return 0; @@ -521,6 +538,15 @@ static void uart_flush_buffer(struct tty_struct *tty) struct uart_port *port = state->port; unsigned long flags; + /* + * This means you called this function _after_ the port was + * closed. No cookie for you. + */ + if (!state || !state->info) { + WARN_ON(1); + return; + } + DPRINTK("uart_flush_buffer(%d) called\n", tty->index); spin_lock_irqsave(&port->lock, flags); diff --git a/drivers/serial/sn_console.c b/drivers/serial/sn_console.c index 43e67d6..60ea4a3 100644 --- a/drivers/serial/sn_console.c +++ b/drivers/serial/sn_console.c @@ -820,7 +820,7 @@ static int __init sn_sal_module_init(void) int retval; if (!ia64_platform_is("sn2")) - return -ENODEV; + return 0; printk(KERN_INFO "sn_console: Console driver init\n"); diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c index 3087045..4e453fa 100644 --- a/drivers/serial/sunsu.c +++ b/drivers/serial/sunsu.c @@ -299,13 +299,10 @@ static void sunsu_start_tx(struct uart_port *port) static void sunsu_stop_rx(struct uart_port *port) { struct uart_sunsu_port *up = (struct uart_sunsu_port *) port; - unsigned long flags; - spin_lock_irqsave(&up->port.lock, flags); up->ier &= ~UART_IER_RLSI; up->port.read_status_mask &= ~UART_LSR_DR; serial_out(up, UART_IER, up->ier); - spin_unlock_irqrestore(&up->port.lock, flags); } static void sunsu_enable_ms(struct uart_port *port) diff --git a/drivers/sn/Kconfig b/drivers/sn/Kconfig index d95265b..a347316 100644 --- a/drivers/sn/Kconfig +++ b/drivers/sn/Kconfig @@ -3,10 +3,11 @@ # menu "SN Devices" + depends on SGI_SN config SGI_IOC4 tristate "SGI IOC4 Base IO support" - depends on (IA64_GENERIC || IA64_SGI_SN2) && MMTIMER + depends on MMTIMER default m ---help--- This option enables basic support for the SGI IOC4-based Base IO @@ -19,7 +20,6 @@ config SGI_IOC4 config SGI_IOC3 tristate "SGI IOC3 Base IO support" - depends on (IA64_GENERIC || IA64_SGI_SN2) default m ---help--- This option enables basic support for the SGI IOC3-based Base IO diff --git a/drivers/sn/ioc3.c b/drivers/sn/ioc3.c index 12357e1..93449a1 100644 --- a/drivers/sn/ioc3.c +++ b/drivers/sn/ioc3.c @@ -62,7 +62,7 @@ static int nic_reset(struct ioc3_driver_data *idd) return presence; } -static inline int nic_read_bit(struct ioc3_driver_data *idd) +static int nic_read_bit(struct ioc3_driver_data *idd) { int result; unsigned long flags; @@ -77,7 +77,7 @@ static inline int nic_read_bit(struct ioc3_driver_data *idd) return result; } -static inline void nic_write_bit(struct ioc3_driver_data *idd, int bit) +static void nic_write_bit(struct ioc3_driver_data *idd, int bit) { if (bit) writel(mcr_pack(6, 110), &idd->vma->mcr); @@ -371,8 +371,7 @@ static void probe_nic(struct ioc3_driver_data *idd) /* Interrupts */ -static inline void -write_ireg(struct ioc3_driver_data *idd, uint32_t val, int which) +static void write_ireg(struct ioc3_driver_data *idd, uint32_t val, int which) { unsigned long flags; @@ -735,14 +734,12 @@ static int ioc3_probe(struct pci_dev *pdev, const struct pci_device_id *pci_id) } /* Add this IOC3 to all submodules */ - read_lock(&ioc3_submodules_lock); for(id=0;id<IOC3_MAX_SUBMODULES;id++) if(ioc3_submodules[id] && ioc3_submodules[id]->probe) { idd->active[id] = 1; idd->active[id] = !ioc3_submodules[id]->probe (ioc3_submodules[id], idd); } - read_unlock(&ioc3_submodules_lock); printk(KERN_INFO "IOC3 Master Driver loaded for %s\n", pci_name(pdev)); @@ -767,7 +764,6 @@ static void ioc3_remove(struct pci_dev *pdev) idd = pci_get_drvdata(pdev); /* Remove this IOC3 from all submodules */ - read_lock(&ioc3_submodules_lock); for(id=0;id<IOC3_MAX_SUBMODULES;id++) if(idd->active[id]) { if(ioc3_submodules[id] && ioc3_submodules[id]->remove) @@ -781,7 +777,6 @@ static void ioc3_remove(struct pci_dev *pdev) pci_name(pdev)); idd->active[id] = 0; } - read_unlock(&ioc3_submodules_lock); /* Clear and disable all IRQs */ write_ireg(idd, ~0, IOC3_W_IEC); diff --git a/drivers/usb/gadget/lh7a40x_udc.c b/drivers/usb/gadget/lh7a40x_udc.c index e02fea5..1a362c5e 100644 --- a/drivers/usb/gadget/lh7a40x_udc.c +++ b/drivers/usb/gadget/lh7a40x_udc.c @@ -1062,11 +1062,11 @@ static int lh7a40x_ep_enable(struct usb_ep *_ep, ep->pio_irqs = 0; ep->ep.maxpacket = le16_to_cpu(desc->wMaxPacketSize); + spin_unlock_irqrestore(&ep->dev->lock, flags); + /* Reset halt state (does flush) */ lh7a40x_set_halt(_ep, 0); - spin_unlock_irqrestore(&ep->dev->lock, flags); - DEBUG("%s: enabled %s\n", __FUNCTION__, _ep->name); return 0; } @@ -1775,6 +1775,7 @@ static void lh7a40x_ep0_setup(struct lh7a40x_udc *dev, u32 csr) break; qep = &dev->ep[ep_num]; + spin_unlock(&dev->lock); if (ctrl.bRequest == USB_REQ_SET_FEATURE) { DEBUG_SETUP("SET_FEATURE (%d)\n", ep_num); @@ -1784,6 +1785,7 @@ static void lh7a40x_ep0_setup(struct lh7a40x_udc *dev, u32 csr) ep_num); lh7a40x_set_halt(&qep->ep, 0); } + spin_lock(&dev->lock); usb_set_index(0); /* Reply with a ZLP on next IN token */ diff --git a/drivers/usb/gadget/rndis.c b/drivers/usb/gadget/rndis.c index 9689efe..6d6eaad 100644 --- a/drivers/usb/gadget/rndis.c +++ b/drivers/usb/gadget/rndis.c @@ -853,11 +853,14 @@ static int rndis_query_response (int configNr, rndis_query_msg_type *buf) // DEBUG("%s: OID = %08X\n", __FUNCTION__, cpu_to_le32(buf->OID)); if (!rndis_per_dev_params [configNr].dev) return -ENOTSUPP; - /* - * we need more memory: - * oid_supported_list is the largest answer + /* + * we need more memory: + * gen_ndis_query_resp expects enough space for + * rndis_query_cmplt_type followed by data. + * oid_supported_list is the largest data reply */ - r = rndis_add_response (configNr, sizeof (oid_supported_list)); + r = rndis_add_response (configNr, + sizeof (oid_supported_list) + sizeof(rndis_query_cmplt_type)); if (!r) return -ENOMEM; resp = (rndis_query_cmplt_type *) r->buf; diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c index 118288d..9e81c26 100644 --- a/drivers/usb/host/pci-quirks.c +++ b/drivers/usb/host/pci-quirks.c @@ -260,12 +260,13 @@ static void __devinit quirk_usb_disable_ehci(struct pci_dev *pdev) offset + EHCI_USBLEGCTLSTS, val | EHCI_USBLEGCTLSTS_SOOE); #endif - } - /* always say Linux will own the hardware - * by setting EHCI_USBLEGSUP_OS. - */ - pci_write_config_byte(pdev, offset + 3, 1); + /* some systems get upset if this semaphore is + * set for any other reason than forcing a BIOS + * handoff.. + */ + pci_write_config_byte(pdev, offset + 3, 1); + } /* if boot firmware now owns EHCI, spin till * it hands it over. diff --git a/drivers/usb/input/hid-core.c b/drivers/usb/input/hid-core.c index 7724780..07a012f 100644 --- a/drivers/usb/input/hid-core.c +++ b/drivers/usb/input/hid-core.c @@ -1407,6 +1407,7 @@ void hid_init_reports(struct hid_device *hid) #define USB_VENDOR_ID_WISEGROUP 0x0925 #define USB_DEVICE_ID_1_PHIDGETSERVO_20 0x8101 #define USB_DEVICE_ID_4_PHIDGETSERVO_20 0x8104 +#define USB_DEVICE_ID_DUAL_USB_JOYPAD 0x8866 #define USB_VENDOR_ID_CODEMERCS 0x07c0 #define USB_DEVICE_ID_CODEMERCS_IOW40 0x1500 @@ -1577,6 +1578,7 @@ static const struct hid_blacklist { { USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_USBHUB_KB, HID_QUIRK_NOGET}, { USB_VENDOR_ID_HP, USB_DEVICE_ID_HP_USBHUB_KB, HID_QUIRK_NOGET }, { USB_VENDOR_ID_TANGTOP, USB_DEVICE_ID_TANGTOP_USBPS2, HID_QUIRK_NOGET }, + { USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_DUAL_USB_JOYPAD, HID_QUIRK_NOGET | HID_QUIRK_MULTI_INPUT }, { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_POWERMOUSE, HID_QUIRK_2WHEEL_POWERMOUSE }, { USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_WCP32PU, HID_QUIRK_2WHEEL_MOUSE_HACK_7 }, diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index f2b4ca8..c145e1e 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -469,8 +469,14 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_7_PID) }, { USB_DEVICE(MOBILITY_VID, MOBILITY_USB_SERIAL_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ACTIVE_ROBOTS_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_MHAM_KW_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_MHAM_YS_PID) }, { USB_DEVICE(FTDI_VID, FTDI_MHAM_Y6_PID) }, { USB_DEVICE(FTDI_VID, FTDI_MHAM_Y8_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_MHAM_IC_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_MHAM_DB9_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_MHAM_RS232_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_MHAM_Y9_PID) }, { USB_DEVICE(FTDI_VID, FTDI_TERATRONIK_VCP_PID) }, { USB_DEVICE(FTDI_VID, FTDI_TERATRONIK_D2XX_PID) }, { USB_DEVICE(EVOLUTION_VID, EVOLUTION_ER1_PID) }, diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h index ca40f16..bdef3b8 100644 --- a/drivers/usb/serial/ftdi_sio.h +++ b/drivers/usb/serial/ftdi_sio.h @@ -333,10 +333,18 @@ /* * microHAM product IDs (http://www.microham.com). - * Submitted by Justin Burket (KL1RL) <zorton@jtan.com>. + * Submitted by Justin Burket (KL1RL) <zorton@jtan.com> + * and Mike Studer (K6EEP) <k6eep@hamsoftware.org>. + * Ian Abbott <abbotti@mev.co.uk> added a few more from the driver INF file. */ +#define FTDI_MHAM_KW_PID 0xEEE8 /* USB-KW interface */ +#define FTDI_MHAM_YS_PID 0xEEE9 /* USB-YS interface */ #define FTDI_MHAM_Y6_PID 0xEEEA /* USB-Y6 interface */ #define FTDI_MHAM_Y8_PID 0xEEEB /* USB-Y8 interface */ +#define FTDI_MHAM_IC_PID 0xEEEC /* USB-IC interface */ +#define FTDI_MHAM_DB9_PID 0xEEED /* USB-DB9 interface */ +#define FTDI_MHAM_RS232_PID 0xEEEE /* USB-RS232 interface */ +#define FTDI_MHAM_Y9_PID 0xEEEF /* USB-Y9 interface */ /* * Active Robots product ids. diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 4dd6865..b5c96e7 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -242,8 +242,10 @@ static void serial_close(struct tty_struct *tty, struct file * filp) down(&port->sem); - if (port->open_count == 0) - goto out; + if (port->open_count == 0) { + up(&port->sem); + return; + } --port->open_count; if (port->open_count == 0) { @@ -260,10 +262,8 @@ static void serial_close(struct tty_struct *tty, struct file * filp) module_put(port->serial->type->driver.owner); } - kref_put(&port->serial->kref, destroy_serial); - -out: up(&port->sem); + kref_put(&port->serial->kref, destroy_serial); } static int serial_write (struct tty_struct * tty, const unsigned char *buf, int count) diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c index bce3d55..11a48d8 100644 --- a/drivers/usb/serial/visor.c +++ b/drivers/usb/serial/visor.c @@ -69,6 +69,8 @@ static struct usb_device_id id_table [] = { .driver_info = (kernel_ulong_t)&palm_os_4_probe }, { USB_DEVICE(HANDSPRING_VENDOR_ID, HANDSPRING_TREO600_ID), .driver_info = (kernel_ulong_t)&palm_os_4_probe }, + { USB_DEVICE(GSPDA_VENDOR_ID, GSPDA_XPLORE_M68_ID), + .driver_info = (kernel_ulong_t)&palm_os_4_probe }, { USB_DEVICE(PALM_VENDOR_ID, PALM_M500_ID), .driver_info = (kernel_ulong_t)&palm_os_4_probe }, { USB_DEVICE(PALM_VENDOR_ID, PALM_M505_ID), @@ -139,6 +141,7 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(HANDSPRING_VENDOR_ID, HANDSPRING_VISOR_ID) }, { USB_DEVICE(HANDSPRING_VENDOR_ID, HANDSPRING_TREO_ID) }, { USB_DEVICE(HANDSPRING_VENDOR_ID, HANDSPRING_TREO600_ID) }, + { USB_DEVICE(GSPDA_VENDOR_ID, GSPDA_XPLORE_M68_ID) }, { USB_DEVICE(PALM_VENDOR_ID, PALM_M500_ID) }, { USB_DEVICE(PALM_VENDOR_ID, PALM_M505_ID) }, { USB_DEVICE(PALM_VENDOR_ID, PALM_M515_ID) }, diff --git a/drivers/usb/serial/visor.h b/drivers/usb/serial/visor.h index b84d1cb..765118d 100644 --- a/drivers/usb/serial/visor.h +++ b/drivers/usb/serial/visor.h @@ -36,6 +36,9 @@ #define PALM_ZIRE_ID 0x0070 #define PALM_M100_ID 0x0080 +#define GSPDA_VENDOR_ID 0x115e +#define GSPDA_XPLORE_M68_ID 0xf100 + #define SONY_VENDOR_ID 0x054C #define SONY_CLIE_3_5_ID 0x0038 #define SONY_CLIE_4_0_ID 0x0066 diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index e71c5ca..31ca920 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -753,6 +753,13 @@ UNUSUAL_DEV( 0x0693, 0x0005, 0x0100, 0x0100, "Flashgate", US_SC_SCSI, US_PR_BULK, NULL, 0 ), +/* Reported by David Hamilton <niftimusmaximus@lycos.com> */ +UNUSUAL_DEV( 0x069b, 0x3004, 0x0001, 0x0001, + "Thomson Multimedia Inc.", + "RCA RD1080 MP3 Player", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY ), + UNUSUAL_DEV( 0x0781, 0x0001, 0x0200, 0x0200, "Sandisk", "ImageMate SDDR-05a", |