diff options
Diffstat (limited to 'init/Kconfig')
| -rw-r--r-- | init/Kconfig | 463 |
1 files changed, 463 insertions, 0 deletions
diff --git a/init/Kconfig b/init/Kconfig new file mode 100644 index 0000000..abe2682 --- /dev/null +++ b/init/Kconfig @@ -0,0 +1,463 @@ +menu "Code maturity level options" + +config EXPERIMENTAL + bool "Prompt for development and/or incomplete code/drivers" + ---help--- + Some of the various things that Linux supports (such as network + drivers, file systems, network protocols, etc.) can be in a state + of development where the functionality, stability, or the level of + testing is not yet high enough for general use. This is usually + known as the "alpha-test" phase among developers. If a feature is + currently in alpha-test, then the developers usually discourage + uninformed widespread use of this feature by the general public to + avoid "Why doesn't this work?" type mail messages. However, active + testing and use of these systems is welcomed. Just be aware that it + may not meet the normal level of reliability or it may fail to work + in some special cases. Detailed bug reports from people familiar + with the kernel internals are usually welcomed by the developers + (before submitting bug reports, please read the documents + <file:README>, <file:MAINTAINERS>, <file:REPORTING-BUGS>, + <file:Documentation/BUG-HUNTING>, and + <file:Documentation/oops-tracing.txt> in the kernel source). + + This option will also make obsoleted drivers available. These are + drivers that have been replaced by something else, and/or are + scheduled to be removed in a future kernel release. + + Unless you intend to help test and develop a feature or driver that + falls into this category, or you have a situation that requires + using these features, you should probably say N here, which will + cause the configurator to present you with fewer choices. If + you say Y here, you will be offered the choice of using features or + drivers that are currently considered to be in the alpha-test phase. + +config CLEAN_COMPILE + bool "Select only drivers expected to compile cleanly" if EXPERIMENTAL + default y + help + Select this option if you don't even want to see the option + to configure known-broken drivers. + + If unsure, say Y + +config BROKEN + bool + depends on !CLEAN_COMPILE + default y + +config BROKEN_ON_SMP + bool + depends on BROKEN || !SMP + default y + +config LOCK_KERNEL + bool + depends on SMP || PREEMPT + default y + +config INIT_ENV_ARG_LIMIT + int + default 32 if !USERMODE + default 128 if USERMODE + help + This is the value of the two limits on the number of argument and of + env.var passed to init from the kernel command line. + +endmenu + +menu "General setup" + +config LOCALVERSION + string "Local version - append to kernel release" + help + Append an extra string to the end of your kernel version. + This will show up when you type uname, for example. + The string you set here will be appended after the contents of + any files with a filename matching localversion* in your + object and source tree, in that order. Your total string can + be a maximum of 64 characters. + +config SWAP + bool "Support for paging of anonymous memory (swap)" + depends on MMU + default y + help + This option allows you to choose whether you want to have support + for socalled swap devices or swap files in your kernel that are + used to provide more virtual memory than the actual RAM present + in your computer. If unsure say Y. + +config SYSVIPC + bool "System V IPC" + depends on MMU + ---help--- + Inter Process Communication is a suite of library functions and + system calls which let processes (running programs) synchronize and + exchange information. It is generally considered to be a good thing, + and some programs won't run unless you say Y here. In particular, if + you want to run the DOS emulator dosemu under Linux (read the + DOSEMU-HOWTO, available from <http://www.tldp.org/docs.html#howto>), + you'll need to say Y here. + + You can find documentation about IPC with "info ipc" and also in + section 6.4 of the Linux Programmer's Guide, available from + <http://www.tldp.org/guides.html>. + +config POSIX_MQUEUE + bool "POSIX Message Queues" + depends on NET && EXPERIMENTAL + ---help--- + POSIX variant of message queues is a part of IPC. In POSIX message + queues every message has a priority which decides about succession + of receiving it by a process. If you want to compile and run + programs written e.g. for Solaris with use of its POSIX message + queues (functions mq_*) say Y here. To use this feature you will + also need mqueue library, available from + <http://www.mat.uni.torun.pl/~wrona/posix_ipc/> + + POSIX message queues are visible as a filesystem called 'mqueue' + and can be mounted somewhere if you want to do filesystem + operations on message queues. + + If unsure, say Y. + +config BSD_PROCESS_ACCT + bool "BSD Process Accounting" + help + If you say Y here, a user level program will be able to instruct the + kernel (via a special system call) to write process accounting + information to a file: whenever a process exits, information about + that process will be appended to the file by the kernel. The + information includes things such as creation time, owning user, + command name, memory usage, controlling terminal etc. (the complete + list is in the struct acct in <file:include/linux/acct.h>). It is + up to the user level program to do useful things with this + information. This is generally a good idea, so say Y. + +config BSD_PROCESS_ACCT_V3 + bool "BSD Process Accounting version 3 file format" + depends on BSD_PROCESS_ACCT + default n + help + If you say Y here, the process accounting information is written + in a new file format that also logs the process IDs of each + process and it's parent. Note that this file format is incompatible + with previous v0/v1/v2 file formats, so you will need updated tools + for processing it. A preliminary version of these tools is available + at <http://www.physik3.uni-rostock.de/tim/kernel/utils/acct/>. + +config SYSCTL + bool "Sysctl support" + ---help--- + The sysctl interface provides a means of dynamically changing + certain kernel parameters and variables on the fly without requiring + a recompile of the kernel or reboot of the system. The primary + interface consists of a system call, but if you say Y to "/proc + file system support", a tree of modifiable sysctl entries will be + generated beneath the /proc/sys directory. They are explained in the + files in <file:Documentation/sysctl/>. Note that enabling this + option will enlarge the kernel by at least 8 KB. + + As it is generally a good thing, you should say Y here unless + building a kernel for install/rescue disks or your system is very + limited in memory. + +config AUDIT + bool "Auditing support" + default y if SECURITY_SELINUX + help + Enable auditing infrastructure that can be used with another + kernel subsystem, such as SELinux (which requires this for + logging of avc messages output). Does not do system-call + auditing without CONFIG_AUDITSYSCALL. + +config AUDITSYSCALL + bool "Enable system-call auditing support" + depends on AUDIT && (X86 || PPC64 || ARCH_S390 || IA64) + default y if SECURITY_SELINUX + help + Enable low-overhead system-call auditing infrastructure that + can be used independently or with another kernel subsystem, + such as SELinux. + +config HOTPLUG + bool "Support for hot-pluggable devices" if !ARCH_S390 + default ARCH_S390 + help + This option is provided for the case where no in-kernel-tree + modules require HOTPLUG functionality, but a module built + outside the kernel tree does. Such modules require Y here. + +config KOBJECT_UEVENT + bool "Kernel Userspace Events" + depends on NET + default y + help + This option enables the kernel userspace event layer, which is a + simple mechanism for kernel-to-user communication over a netlink + socket. + The goal of the kernel userspace events layer is to provide a simple + and efficient events system, that notifies userspace about kobject + state changes. This will enable applications to just listen for + events instead of polling system devices and files. + Hotplug events (kobject addition and removal) are also available on + the netlink socket in addition to the execution of /sbin/hotplug if + CONFIG_HOTPLUG is enabled. + + Say Y, unless you are building a system requiring minimal memory + consumption. + +config IKCONFIG + bool "Kernel .config support" + ---help--- + This option enables the complete Linux kernel ".config" file + contents to be saved in the kernel. It provides documentation + of which kernel options are used in a running kernel or in an + on-disk kernel. This information can be extracted from the kernel + image file with the script scripts/extract-ikconfig and used as + input to rebuild the current kernel or to build another kernel. + It can also be extracted from a running kernel by reading + /proc/config.gz if enabled (below). + +config IKCONFIG_PROC + bool "Enable access to .config through /proc/config.gz" + depends on IKCONFIG && PROC_FS + ---help--- + This option enables access to the kernel configuration file + through /proc/config.gz. + +config CPUSETS + bool "Cpuset support" + depends on SMP + help + This options will let you create and manage CPUSET's which + allow dynamically partitioning a system into sets of CPUs and + Memory Nodes and assigning tasks to run only within those sets. + This is primarily useful on large SMP or NUMA systems. + + Say N if unsure. + +menuconfig EMBEDDED + bool "Configure standard kernel features (for small systems)" + help + This option allows certain base kernel options and settings + to be disabled or tweaked. This is for specialized + environments which can tolerate a "non-standard" kernel. + Only use this if you really know what you are doing. + +config KALLSYMS + bool "Load all symbols for debugging/kksymoops" if EMBEDDED + default y + help + Say Y here to let the kernel print out symbolic crash information and + symbolic stack backtraces. This increases the size of the kernel + somewhat, as all symbols have to be loaded into the kernel image. + +config KALLSYMS_ALL + bool "Include all symbols in kallsyms" + depends on DEBUG_KERNEL && KALLSYMS + help + Normally kallsyms only contains the symbols of functions, for nicer + OOPS messages. Some debuggers can use kallsyms for other + symbols too: say Y here to include all symbols, and you + don't care about adding 300k to the size of your kernel. + + Say N. + +config KALLSYMS_EXTRA_PASS + bool "Do an extra kallsyms pass" + depends on KALLSYMS + help + If kallsyms is not working correctly, the build will fail with + inconsistent kallsyms data. If that occurs, log a bug report and + turn on KALLSYMS_EXTRA_PASS which should result in a stable build. + Always say N here unless you find a bug in kallsyms, which must be + reported. KALLSYMS_EXTRA_PASS is only a temporary workaround while + you wait for kallsyms to be fixed. + +config BASE_FULL + default y + bool "Enable full-sized data structures for core" if EMBEDDED + help + Disabling this option reduces the size of miscellaneous core + kernel data structures. This saves memory on small machines, + but may reduce performance. + +config FUTEX + bool "Enable futex support" if EMBEDDED + default y + help + Disabling this option will cause the kernel to be built without + support for "fast userspace mutexes". The resulting kernel may not + run glibc-based applications correctly. + +config EPOLL + bool "Enable eventpoll support" if EMBEDDED + default y + help + Disabling this option will cause the kernel to be built without + support for epoll family of system calls. + +config CC_OPTIMIZE_FOR_SIZE + bool "Optimize for size" if EMBEDDED + default y if ARM || H8300 + help + Enabling this option will pass "-Os" instead of "-O2" to gcc + resulting in a smaller kernel. + + WARNING: some versions of gcc may generate incorrect code with this + option. If problems are observed, a gcc upgrade may be needed. + + If unsure, say N. + +config SHMEM + bool "Use full shmem filesystem" if EMBEDDED + default y + depends on MMU + help + The shmem is an internal filesystem used to manage shared memory. + It is backed by swap and manages resource limits. It is also exported + to userspace as tmpfs if TMPFS is enabled. Disabling this + option replaces shmem and tmpfs with the much simpler ramfs code, + which may be appropriate on small systems without swap. + +config CC_ALIGN_FUNCTIONS + int "Function alignment" if EMBEDDED + default 0 + help + Align the start of functions to the next power-of-two greater than n, + skipping up to n bytes. For instance, 32 aligns functions + to the next 32-byte boundary, but 24 would align to the next + 32-byte boundary only if this can be done by skipping 23 bytes or less. + Zero means use compiler's default. + +config CC_ALIGN_LABELS + int "Label alignment" if EMBEDDED + default 0 + help + Align all branch targets to a power-of-two boundary, skipping + up to n bytes like ALIGN_FUNCTIONS. This option can easily + make code slower, because it must insert dummy operations for + when the branch target is reached in the usual flow of the code. + Zero means use compiler's default. + +config CC_ALIGN_LOOPS + int "Loop alignment" if EMBEDDED + default 0 + help + Align loops to a power-of-two boundary, skipping up to n bytes. + Zero means use compiler's default. + +config CC_ALIGN_JUMPS + int "Jump alignment" if EMBEDDED + default 0 + help + Align branch targets to a power-of-two boundary, for branch + targets where the targets can only be reached by jumping, + skipping up to n bytes like ALIGN_FUNCTIONS. In this case, + no dummy operations need be executed. + Zero means use compiler's default. + +endmenu # General setup + +config TINY_SHMEM + default !SHMEM + bool + +config BASE_SMALL + int + default 0 if BASE_FULL + default 1 if !BASE_FULL + +menu "Loadable module support" + +config MODULES + bool "Enable loadable module support" + help + Kernel modules are small pieces of compiled code which can + be inserted in the running kernel, rather than being + permanently built into the kernel. You use the "modprobe" + tool to add (and sometimes remove) them. If you say Y here, + many parts of the kernel can be built as modules (by + answering M instead of Y where indicated): this is most + useful for infrequently used options which are not required + for booting. For more information, see the man pages for + modprobe, lsmod, modinfo, insmod and rmmod. + + If you say Y here, you will need to run "make + modules_install" to put the modules under /lib/modules/ + where modprobe can find them (you may need to be root to do + this). + + If unsure, say Y. + +config MODULE_UNLOAD + bool "Module unloading" + depends on MODULES + help + Without this option you will not be able to unload any + modules (note that some modules may not be unloadable + anyway), which makes your kernel slightly smaller and + simpler. If unsure, say Y. + +config MODULE_FORCE_UNLOAD + bool "Forced module unloading" + depends on MODULE_UNLOAD && EXPERIMENTAL + help + This option allows you to force a module to unload, even if the + kernel believes it is unsafe: the kernel will remove the module + without waiting for anyone to stop using it (using the -f option to + rmmod). This is mainly for kernel developers and desperate users. + If unsure, say N. + +config OBSOLETE_MODPARM + bool + default y + depends on MODULES + help + You need this option to use module parameters on modules which + have not been converted to the new module parameter system yet. + If unsure, say Y. + +config MODVERSIONS + bool "Module versioning support (EXPERIMENTAL)" + depends on MODULES && EXPERIMENTAL && !UML + help + Usually, you have to use modules compiled with your kernel. + Saying Y here makes it sometimes possible to use modules + compiled for different kernels, by adding enough information + to the modules to (hopefully) spot any changes which would + make them incompatible with the kernel you are running. If + unsure, say N. + +config MODULE_SRCVERSION_ALL + bool "Source checksum for all modules" + depends on MODULES + help + Modules which contain a MODULE_VERSION get an extra "srcversion" + field inserted into their modinfo section, which contains a + sum of the source files which made it. This helps maintainers + see exactly which source was used to build a module (since + others sometimes change the module source without updating + the version). With this option, such a "srcversion" field + will be created for all modules. If unsure, say N. + +config KMOD + bool "Automatic kernel module loading" + depends on MODULES + help + Normally when you have selected some parts of the kernel to + be created as kernel modules, you must load them (using the + "modprobe" command) before you can use them. If you say Y + here, some parts of the kernel will be able to load modules + automatically: when a part of the kernel needs a module, it + runs modprobe with the appropriate arguments, thereby + loading the module if it is available. If unsure, say Y. + +config STOP_MACHINE + bool + default y + depends on (SMP && MODULE_UNLOAD) || HOTPLUG_CPU + help + Need stop_machine() primitive. +endmenu |