Add real android-21 32-bit headers/libs

Also corret __ANDROID_API__ in 64-bit android/api-level.h

Change-Id: Ia7f82f07d70eebb2daa62e03c227091b74d05fb6

1 files changed, 256 insertions, 0 deletions

diff --git a/9/platforms/android-21/arch-arm/usr/include/android/looper.h b/9/platforms/android-21/arch-arm/usr/include/android/looper.h
new file mode 100644
index 0000000..74c0383
--- /dev/null
+++ b/9/platforms/android-21/arch-arm/usr/include/android/looper.h
@@ -0,0 +1,256 @@
+/*
+ * Copyright (C) 2010 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+
+#ifndef ANDROID_LOOPER_H
+#define ANDROID_LOOPER_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * ALooper
+ *
+ * A looper is the state tracking an event loop for a thread.
+ * Loopers do not define event structures or other such things; rather
+ * they are a lower-level facility to attach one or more discrete objects
+ * listening for an event.  An "event" here is simply data available on
+ * a file descriptor: each attached object has an associated file descriptor,
+ * and waiting for "events" means (internally) polling on all of these file
+ * descriptors until one or more of them have data available.
+ *
+ * A thread can have only one ALooper associated with it.
+ */
+struct ALooper;
+typedef struct ALooper ALooper;
+
+/**
+ * Returns the looper associated with the calling thread, or NULL if
+ * there is not one.
+ */
+ALooper* ALooper_forThread();
+
+enum {
+    /**
+     * Option for ALooper_prepare: this looper will accept calls to
+     * ALooper_addFd() that do not have a callback (that is provide NULL
+     * for the callback).  In this case the caller of ALooper_pollOnce()
+     * or ALooper_pollAll() MUST check the return from these functions to
+     * discover when data is available on such fds and process it.
+     */
+    ALOOPER_PREPARE_ALLOW_NON_CALLBACKS = 1<<0
+};
+
+/**
+ * Prepares a looper associated with the calling thread, and returns it.
+ * If the thread already has a looper, it is returned.  Otherwise, a new
+ * one is created, associated with the thread, and returned.
+ *
+ * The opts may be ALOOPER_PREPARE_ALLOW_NON_CALLBACKS or 0.
+ */
+ALooper* ALooper_prepare(int opts);
+
+enum {
+    /**
+     * Result from ALooper_pollOnce() and ALooper_pollAll():
+     * The poll was awoken using wake() before the timeout expired
+     * and no callbacks were executed and no other file descriptors were ready.
+     */
+    ALOOPER_POLL_WAKE = -1,
+
+    /**
+     * Result from ALooper_pollOnce() and ALooper_pollAll():
+     * One or more callbacks were executed.
+     */
+    ALOOPER_POLL_CALLBACK = -2,
+
+    /**
+     * Result from ALooper_pollOnce() and ALooper_pollAll():
+     * The timeout expired.
+     */
+    ALOOPER_POLL_TIMEOUT = -3,
+
+    /**
+     * Result from ALooper_pollOnce() and ALooper_pollAll():
+     * An error occurred.
+     */
+    ALOOPER_POLL_ERROR = -4,
+};
+
+/**
+ * Acquire a reference on the given ALooper object.  This prevents the object
+ * from being deleted until the reference is removed.  This is only needed
+ * to safely hand an ALooper from one thread to another.
+ */
+void ALooper_acquire(ALooper* looper);
+
+/**
+ * Remove a reference that was previously acquired with ALooper_acquire().
+ */
+void ALooper_release(ALooper* looper);
+
+/**
+ * Flags for file descriptor events that a looper can monitor.
+ *
+ * These flag bits can be combined to monitor multiple events at once.
+ */
+enum {
+    /**
+     * The file descriptor is available for read operations.
+     */
+    ALOOPER_EVENT_INPUT = 1 << 0,
+
+    /**
+     * The file descriptor is available for write operations.
+     */
+    ALOOPER_EVENT_OUTPUT = 1 << 1,
+
+    /**
+     * The file descriptor has encountered an error condition.
+     *
+     * The looper always sends notifications about errors; it is not necessary
+     * to specify this event flag in the requested event set.
+     */
+    ALOOPER_EVENT_ERROR = 1 << 2,
+
+    /**
+     * The file descriptor was hung up.
+     * For example, indicates that the remote end of a pipe or socket was closed.
+     *
+     * The looper always sends notifications about hangups; it is not necessary
+     * to specify this event flag in the requested event set.
+     */
+    ALOOPER_EVENT_HANGUP = 1 << 3,
+
+    /**
+     * The file descriptor is invalid.
+     * For example, the file descriptor was closed prematurely.
+     *
+     * The looper always sends notifications about invalid file descriptors; it is not necessary
+     * to specify this event flag in the requested event set.
+     */
+    ALOOPER_EVENT_INVALID = 1 << 4,
+};
+
+/**
+ * For callback-based event loops, this is the prototype of the function
+ * that is called when a file descriptor event occurs.
+ * It is given the file descriptor it is associated with,
+ * a bitmask of the poll events that were triggered (typically ALOOPER_EVENT_INPUT),
+ * and the data pointer that was originally supplied.
+ *
+ * Implementations should return 1 to continue receiving callbacks, or 0
+ * to have this file descriptor and callback unregistered from the looper.
+ */
+typedef int (*ALooper_callbackFunc)(int fd, int events, void* data);
+
+/**
+ * Waits for events to be available, with optional timeout in milliseconds.
+ * Invokes callbacks for all file descriptors on which an event occurred.
+ *
+ * If the timeout is zero, returns immediately without blocking.
+ * If the timeout is negative, waits indefinitely until an event appears.
+ *
+ * Returns ALOOPER_POLL_WAKE if the poll was awoken using wake() before
+ * the timeout expired and no callbacks were invoked and no other file
+ * descriptors were ready.
+ *
+ * Returns ALOOPER_POLL_CALLBACK if one or more callbacks were invoked.
+ *
+ * Returns ALOOPER_POLL_TIMEOUT if there was no data before the given
+ * timeout expired.
+ *
+ * Returns ALOOPER_POLL_ERROR if an error occurred.
+ *
+ * Returns a value >= 0 containing an identifier if its file descriptor has data
+ * and it has no callback function (requiring the caller here to handle it).
+ * In this (and only this) case outFd, outEvents and outData will contain the poll
+ * events and data associated with the fd, otherwise they will be set to NULL.
+ *
+ * This method does not return until it has finished invoking the appropriate callbacks
+ * for all file descriptors that were signalled.
+ */
+int ALooper_pollOnce(int timeoutMillis, int* outFd, int* outEvents, void** outData);
+
+/**
+ * Like ALooper_pollOnce(), but performs all pending callbacks until all
+ * data has been consumed or a file descriptor is available with no callback.
+ * This function will never return ALOOPER_POLL_CALLBACK.
+ */
+int ALooper_pollAll(int timeoutMillis, int* outFd, int* outEvents, void** outData);
+
+/**
+ * Wakes the poll asynchronously.
+ *
+ * This method can be called on any thread.
+ * This method returns immediately.
+ */
+void ALooper_wake(ALooper* looper);
+
+/**
+ * Adds a new file descriptor to be polled by the looper.
+ * If the same file descriptor was previously added, it is replaced.
+ *
+ * "fd" is the file descriptor to be added.
+ * "ident" is an identifier for this event, which is returned from ALooper_pollOnce().
+ * The identifier must be >= 0, or ALOOPER_POLL_CALLBACK if providing a non-NULL callback.
+ * "events" are the poll events to wake up on.  Typically this is ALOOPER_EVENT_INPUT.
+ * "callback" is the function to call when there is an event on the file descriptor.
+ * "data" is a private data pointer to supply to the callback.
+ *
+ * There are two main uses of this function:
+ *
+ * (1) If "callback" is non-NULL, then this function will be called when there is
+ * data on the file descriptor.  It should execute any events it has pending,
+ * appropriately reading from the file descriptor.  The 'ident' is ignored in this case.
+ *
+ * (2) If "callback" is NULL, the 'ident' will be returned by ALooper_pollOnce
+ * when its file descriptor has data available, requiring the caller to take
+ * care of processing it.
+ *
+ * Returns 1 if the file descriptor was added or -1 if an error occurred.
+ *
+ * This method can be called on any thread.
+ * This method may block briefly if it needs to wake the poll.
+ */
+int ALooper_addFd(ALooper* looper, int fd, int ident, int events,
+        ALooper_callbackFunc callback, void* data);
+
+/**
+ * Removes a previously added file descriptor from the looper.
+ *
+ * When this method returns, it is safe to close the file descriptor since the looper
+ * will no longer have a reference to it.  However, it is possible for the callback to
+ * already be running or for it to run one last time if the file descriptor was already
+ * signalled.  Calling code is responsible for ensuring that this case is safely handled.
+ * For example, if the callback takes care of removing itself during its own execution either
+ * by returning 0 or by calling this method, then it can be guaranteed to not be invoked
+ * again at any later time unless registered anew.
+ *
+ * Returns 1 if the file descriptor was removed, 0 if none was previously registered
+ * or -1 if an error occurred.
+ *
+ * This method can be called on any thread.
+ * This method may block briefly if it needs to wake the poll.
+ */
+int ALooper_removeFd(ALooper* looper, int fd);
+
+#ifdef __cplusplus
+};
+#endif
+
+#endif // ANDROID_LOOPER_H