1 files changed, 0 insertions, 323 deletions
diff --git a/libcutils/arch-mips/android_memset.S b/libcutils/arch-mips/android_memset.S
deleted file mode 100644
index 6811de0..0000000
--- a/libcutils/arch-mips/android_memset.S
+++ /dev/null
@@ -1,323 +0,0 @@
-/*
- * Copyright (c) 2009
- *      MIPS Technologies, Inc., California.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the name of the MIPS Technologies, Inc., nor the names of its
- *    contributors may be used to endorse or promote products derived from
- *    this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE MIPS TECHNOLOGIES, INC. ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE MIPS TECHNOLOGIES, INC. BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-/************************************************************************
- *
- *  memset.S, version "64h" with 1 cache line horizon for "pref 30" and 14 nops
- *  Version: "043009"
- *
- ************************************************************************/
-
-
-/************************************************************************
- *  Include files
- ************************************************************************/
-
-#include <machine/asm.h>
-#define END(f) .cfi_endproc; .size f, .-f; .end f
-
-/*
- * This routine could be optimized for MIPS64. The current code only
- * uses MIPS32 instructions.
- */
-
-#if defined(__MIPSEB__)
-#  define SWHI	swl		/* high part is left in big-endian	*/
-#  define SWLO	swr		/* low part is right in big-endian	*/
-#endif
-
-#if defined(__MIPSEL__)
-#  define SWHI	swr		/* high part is right in little-endian	*/
-#  define SWLO	swl		/* low part is left in little-endian	*/
-#endif
-
-#if !(defined(XGPROF) || defined(XPROF))
-#undef SETUP_GP
-#define SETUP_GP
-#endif
-
-#ifdef NDEBUG
-#define DBG #
-#else
-#define DBG
-#endif
-
-/*
- * void android_memset16(uint16_t* dst, uint16_t value, size_t size);
- */
-
-LEAF(android_memset16,0)
-	.set noreorder
-DBG	/* Check parameters */
-DBG	andi	t0,a0,1			# a0 must be halfword aligned
-DBG	tne	t0,zero
-DBG	andi	t2,a2,1			# a2 must be even
-DBG	tne	t2,zero
-
-#ifdef FIXARGS
-	# ensure count is even
-#if (__mips==32) && (__mips_isa_rev>=2)
-	ins	a2,zero,0,1
-#else
-	ori	a2,1
-	xori	a2,1
-#endif
-#endif
-
-#if (__mips==32) && (__mips_isa_rev>=2)
-	ins	a1,a1,16,16
-#else
-	andi	a1,0xffff
-	sll	t3,a1,16
-	or	a1,t3
-#endif
-
-	beqz	a2,.Ldone
-	 andi	t1,a0,2
-	beqz	t1,.Lalignok
-	 addu	t0,a0,a2		# t0 is the "past the end" address
-	sh	a1,0(a0)		# store one halfword to get aligned
-	addu	a0,2
-	subu	a2,2
-.Lalignok:
-	slti	t1,a2,4			# .Laligned for 4 or more bytes
-	beqz	t1,.Laligned
-	 sne	t1,a2,2			# one more halfword?
-	bnez	t1,.Ldone
-	 nop
-	sh	a1,0(a0)
-.Ldone:
-	j	ra
-	 nop
-	.set reorder
-END(android_memset16)
-
-/*
- * void android_memset32(uint32_t* dst, uint32_t value, size_t size);
- */
-
-LEAF(android_memset32,0)
-	.set noreorder
-DBG	/* Check parameters */
-DBG	andi	t0,a0,3			# a0 must be word aligned
-DBG	tne	t0,zero
-DBG	andi	t2,a2,3			# a2 must be a multiple of 4 bytes
-DBG	tne	t2,zero
-
-#ifdef FIXARGS
-	# ensure count is a multiple of 4
-#if (__mips==32) && (__mips_isa_rev>=2)
-	ins	$a2,$0,0,2
-#else
-	ori	a2,3
-	xori	a2,3
-#endif
-#endif
-
-	bnez	a2,.Laligned		# any work to do?
-	 addu	t0,a0,a2		# t0 is the "past the end" address
-
-	j	ra
-	 nop
-	.set reorder
-END(android_memset32)
-
-LEAF(memset,0)
-
-	.set	noreorder
-	.set	noat
-
-	addu	t0,a0,a2		# t0 is the "past the end" address
-	slti	AT,a2,4			# is a2 less than 4?
-	bne	AT,zero,.Llast4		# if yes, go to last4
-	 move	v0,a0			# memset returns the dst pointer
-
-	beq	a1,zero,.Lset0
-	 subu	v1,zero,a0
-
-	# smear byte into 32 bit word
-#if (__mips==32) && (__mips_isa_rev>=2)
-	ins     a1, a1, 8, 8        # Replicate fill byte into half-word.
-	ins     a1, a1, 16, 16      # Replicate fill byte into word.
-#else
-	and	a1,0xff
-	sll	AT,a1,8
-	or	a1,AT
-	sll	AT,a1,16
-	or	a1,AT
-#endif
-
-.Lset0:
-	andi	v1,v1,0x3		# word-unaligned address?
-	beq	v1,zero,.Laligned	# v1 is the unalignment count
-	 subu	a2,a2,v1
-	SWHI	a1,0(a0)
-	addu	a0,a0,v1
-
-# Here we have the "word-aligned" a0 (until the "last4")
-.Laligned:
-	andi	t8,a2,0x3f	# any 64-byte chunks?
-				# t8 is the byte count past 64-byte chunks
-	beq	a2,t8,.Lchk8w	# when a2==t8, no 64-byte chunks
-				# There will be at most 1 32-byte chunk then
-	 subu	a3,a2,t8	# subtract from a2 the reminder
-				# Here a3 counts bytes in 16w chunks
-	addu	a3,a0,a3	# Now a3 is the final dst after 64-byte chunks
-
-# Find out, if there are any 64-byte chunks after which will be still at least
-# 96 bytes left. The value "96" is calculated as needed buffer for
-# "pref 30,64(a0)" prefetch, which can be used as "pref 30,0(a0)" after
-# incrementing "a0" by 64.
-# For "a2" below 160 there will be no such "pref 30 safe" 64-byte chunk.
-#
-	sltiu	v1,a2,160
-	bgtz	v1,.Lloop16w_nopref30	# skip "pref 30,0(a0)"
-	 subu	t7,a2,96	# subtract "pref 30 unsafe" region
-		# below we have at least 1 64-byte chunk which is "pref 30 safe"
-	andi	t6,t7,0x3f	# t6 is past "64-byte safe chunks" reminder
-	subu	t5,t7,t6	# subtract from t7 the reminder
-				# Here t5 counts bytes in 16w "safe" chunks
-	addu	t4,a0,t5	# Now t4 is the dst after 64-byte "safe" chunks
-
-# Don't use "pref 30,0(a0)" for a0 in a "middle" of a cache line
-#	pref	30,0(a0)
-# Here we are in the region, where it is safe to use "pref 30,64(a0)"
-.Lloop16w:
-	addiu	a0,a0,64
-	pref	30,-32(a0)	# continue setting up the dest, addr 64-32
-	sw	a1,-64(a0)
-	sw	a1,-60(a0)
-	sw	a1,-56(a0)
-	sw	a1,-52(a0)
-	sw	a1,-48(a0)
-	sw	a1,-44(a0)
-	sw	a1,-40(a0)
-	sw	a1,-36(a0)
-	nop
-	nop			# the extra nop instructions help to balance
-	nop			# cycles needed for "store" + "fill" + "evict"
-	nop			# For 64byte store there are needed 8 fill
-	nop			# and 8 evict cycles, i.e. at least 32 instr.
-	nop
-	nop
-	pref	30,0(a0)	# continue setting up the dest, addr 64-0
-	sw	a1,-32(a0)
-	sw	a1,-28(a0)
-	sw	a1,-24(a0)
-	sw	a1,-20(a0)
-	sw	a1,-16(a0)
-	sw	a1,-12(a0)
-	sw	a1,-8(a0)
-	sw	a1,-4(a0)
-	nop
-	nop
-	nop
-	nop			# NOTE: adding 14 nop-s instead of 12 nop-s
-	nop			# gives better results for "fast" memory
-	nop
-	bne	a0,t4,.Lloop16w
-	 nop
-
-	beq	a0,a3,.Lchk8w	# maybe no more 64-byte chunks?
-	 nop			# this "delayed slot" is useless ...
-
-.Lloop16w_nopref30:	# there could be up to 3 "64-byte nopref30" chunks
-	addiu	a0,a0,64
-	sw	a1,-64(a0)
-	sw	a1,-60(a0)
-	sw	a1,-56(a0)
-	sw	a1,-52(a0)
-	sw	a1,-48(a0)
-	sw	a1,-44(a0)
-	sw	a1,-40(a0)
-	sw	a1,-36(a0)
-	sw	a1,-32(a0)
-	sw	a1,-28(a0)
-	sw	a1,-24(a0)
-	sw	a1,-20(a0)
-	sw	a1,-16(a0)
-	sw	a1,-12(a0)
-	sw	a1,-8(a0)
-	bne	a0,a3,.Lloop16w_nopref30
-	 sw	a1,-4(a0)
-
-.Lchk8w:		# t8 here is the byte count past 64-byte chunks
-
-	andi	t7,t8,0x1f	# is there a 32-byte chunk?
-				# the t7 is the reminder count past 32-bytes
-	beq	t8,t7,.Lchk1w	# when t8==t7, no 32-byte chunk
-	 move	a2,t7
-
-	sw	a1,0(a0)
-	sw	a1,4(a0)
-	sw	a1,8(a0)
-	sw	a1,12(a0)
-	sw	a1,16(a0)
-	sw	a1,20(a0)
-	sw	a1,24(a0)
-	sw	a1,28(a0)
-	addiu	a0,a0,32
-
-.Lchk1w:
-	andi	t8,a2,0x3	# now t8 is the reminder past 1w chunks
-	beq	a2,t8,.Llast4aligned
-	 subu	a3,a2,t8	# a3 is the count of bytes in 1w chunks
-	addu	a3,a0,a3	# now a3 is the dst address past the 1w chunks
-
-# copying in words (4-byte chunks)
-.LwordCopy_loop:
-	addiu	a0,a0,4
-	bne	a0,a3,.LwordCopy_loop
-	 sw	a1,-4(a0)
-
-# store last 0-3 bytes
-# this will repeat the last store if the memset finishes on a word boundary
-.Llast4aligned:
-	j	ra
-	 SWLO	a1,-1(t0)
-
-.Llast4:
-	beq	a0,t0,.Llast4e
-.Llast4l:
-	 addiu	a0,a0,1
-	bne	a0,t0,.Llast4l
-	 sb	a1,-1(a0)
-.Llast4e:
-	j	ra
-	 nop
-
-	.set	at
-	.set	reorder
-
-END(memset)
-
-
-/************************************************************************
- *  Implementation : Static functions
- ************************************************************************/