summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorWolfgang Denk <wd@denx.de>2010-10-11 10:19:04 +0200
committerWolfgang Denk <wd@denx.de>2010-10-11 10:19:04 +0200
commite67f46286440a53fb1d693152667ea3b1a6b3060 (patch)
tree3fdedda3a9122785e07e209ab6a5a0fc7fd65fd7
parentbfc7bea6adc46e1db2f5a5e3464d7652ed67c864 (diff)
parentf8f8acd7249d224ed5f9704a5738c469b137bc8e (diff)
downloadbootable_bootloader_goldelico_gta04-e67f46286440a53fb1d693152667ea3b1a6b3060.zip
bootable_bootloader_goldelico_gta04-e67f46286440a53fb1d693152667ea3b1a6b3060.tar.gz
bootable_bootloader_goldelico_gta04-e67f46286440a53fb1d693152667ea3b1a6b3060.tar.bz2
Merge branch 'master' of git://git.denx.de/u-boot-imx
-rw-r--r--MAINTAINERS1
-rw-r--r--arch/arm/cpu/armv7/Makefile3
-rw-r--r--arch/arm/cpu/armv7/omap-common/Makefile1
-rw-r--r--arch/arm/cpu/armv7/syslib.c (renamed from arch/arm/cpu/armv7/omap-common/syslib.c)0
-rw-r--r--arch/arm/include/asm/arch-mx31/mx31-regs.h14
-rw-r--r--arch/arm/include/asm/arch-mx31/mx31.h25
-rw-r--r--arch/arm/include/asm/arch-mx51/imx-regs.h26
-rw-r--r--arch/arm/include/asm/arch-mx51/mx51_pins.h44
-rw-r--r--arch/arm/include/asm/arch-mx51/sys_proto.h1
-rw-r--r--board/davedenx/qong/qong.c29
-rw-r--r--board/freescale/mx51evk/mx51evk.c2
-rw-r--r--board/ttcontrol/vision2/Makefile48
-rw-r--r--board/ttcontrol/vision2/config.mk25
-rw-r--r--board/ttcontrol/vision2/imximage_hynix.cfg209
-rw-r--r--board/ttcontrol/vision2/vision2.c711
-rw-r--r--boards.cfg1
-rw-r--r--drivers/gpio/Makefile2
-rw-r--r--drivers/gpio/mxc_gpio.c (renamed from drivers/gpio/mx31_gpio.c)47
-rw-r--r--drivers/misc/fsl_pmic.c10
-rw-r--r--drivers/serial/serial_mxc.c7
-rw-r--r--drivers/spi/mxc_spi.c168
-rw-r--r--include/configs/imx31_litekit.h4
-rw-r--r--include/configs/imx31_phycore.h2
-rw-r--r--include/configs/mx31ads.h4
-rw-r--r--include/configs/mx31pdk.h4
-rw-r--r--include/configs/mx51evk.h2
-rw-r--r--include/configs/qong.h6
-rw-r--r--include/configs/vision2.h214
-rw-r--r--include/mc13892.h3
-rw-r--r--include/mxc_gpio.h (renamed from board/freescale/mx51evk/mx51evk.h)50
30 files changed, 1510 insertions, 153 deletions
diff --git a/MAINTAINERS b/MAINTAINERS
index e003226..785fccf 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -548,6 +548,7 @@ Stefano Babic <sbabic@denx.de>
polaris xscale
trizepsiv xscale
mx51evk i.MX51
+ vision2 i.MX51
Dirk Behme <dirk.behme@gmail.com>
diff --git a/arch/arm/cpu/armv7/Makefile b/arch/arm/cpu/armv7/Makefile
index ae20299..7743fef 100644
--- a/arch/arm/cpu/armv7/Makefile
+++ b/arch/arm/cpu/armv7/Makefile
@@ -27,6 +27,7 @@ LIB = $(obj)lib$(CPU).a
START := start.o
COBJS := cpu.o
+COBJS += syslib.o
SRCS := $(START:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
@@ -44,4 +45,4 @@ include $(SRCTREE)/rules.mk
sinclude $(obj).depend
-######################################################################### \ No newline at end of file
+#########################################################################
diff --git a/arch/arm/cpu/armv7/omap-common/Makefile b/arch/arm/cpu/armv7/omap-common/Makefile
index caee726..aedea7b 100644
--- a/arch/arm/cpu/armv7/omap-common/Makefile
+++ b/arch/arm/cpu/armv7/omap-common/Makefile
@@ -28,7 +28,6 @@ LIB = $(obj)libomap-common.a
SOBJS := reset.o
COBJS := timer.o
-COBJS += syslib.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
diff --git a/arch/arm/cpu/armv7/omap-common/syslib.c b/arch/arm/cpu/armv7/syslib.c
index f9ed9a3..f9ed9a3 100644
--- a/arch/arm/cpu/armv7/omap-common/syslib.c
+++ b/arch/arm/cpu/armv7/syslib.c
diff --git a/arch/arm/include/asm/arch-mx31/mx31-regs.h b/arch/arm/include/asm/arch-mx31/mx31-regs.h
index d72585c..f05e743 100644
--- a/arch/arm/include/asm/arch-mx31/mx31-regs.h
+++ b/arch/arm/include/asm/arch-mx31/mx31-regs.h
@@ -57,6 +57,14 @@ struct clock_control_regs {
u32 pdr2;
};
+/* GPIO Registers */
+struct gpio_regs {
+ u32 gpio_dr;
+ u32 gpio_dir;
+ u32 gpio_psr;
+};
+
+
/* Bit definitions for RCSR register in CCM */
#define CCM_RCSR_NF16B (1 << 31)
#define CCM_RCSR_NFMS (1 << 30)
@@ -153,9 +161,9 @@ struct clock_control_regs {
/*
* GPIO
*/
-#define GPIO1_BASE 0x53FCC000
-#define GPIO2_BASE 0x53FD0000
-#define GPIO3_BASE 0x53FA4000
+#define GPIO1_BASE_ADDR 0x53FCC000
+#define GPIO2_BASE_ADDR 0x53FD0000
+#define GPIO3_BASE_ADDR 0x53FA4000
#define GPIO_DR 0x00000000 /* data register */
#define GPIO_GDIR 0x00000004 /* direction register */
#define GPIO_PSR 0x00000008 /* pad status register */
diff --git a/arch/arm/include/asm/arch-mx31/mx31.h b/arch/arm/include/asm/arch-mx31/mx31.h
index f702d26..5a5aa11 100644
--- a/arch/arm/include/asm/arch-mx31/mx31.h
+++ b/arch/arm/include/asm/arch-mx31/mx31.h
@@ -28,31 +28,6 @@ extern u32 mx31_get_ipg_clk(void);
#define imx_get_uartclk mx31_get_ipg_clk
extern void mx31_gpio_mux(unsigned long mode);
-enum mx31_gpio_direction {
- MX31_GPIO_DIRECTION_IN,
- MX31_GPIO_DIRECTION_OUT,
-};
-
-#ifdef CONFIG_MX31_GPIO
-extern int mx31_gpio_direction(unsigned int gpio,
- enum mx31_gpio_direction direction);
-extern void mx31_gpio_set(unsigned int gpio, unsigned int value);
-extern int mx31_gpio_get(unsigned int gpio);
-#else
-static inline int mx31_gpio_direction(unsigned int gpio,
- enum mx31_gpio_direction direction)
-{
- return 1;
-}
-static inline int mx31_gpio_get(unsigned int gpio)
-{
- return 1;
-}
-static inline void mx31_gpio_set(unsigned int gpio, unsigned int value)
-{
-}
-#endif
-
void mx31_uart1_hw_init(void);
void mx31_spi2_hw_init(void);
diff --git a/arch/arm/include/asm/arch-mx51/imx-regs.h b/arch/arm/include/asm/arch-mx51/imx-regs.h
index 3887d3c..3ddda40 100644
--- a/arch/arm/include/asm/arch-mx51/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx51/imx-regs.h
@@ -23,9 +23,6 @@
#ifndef __ASM_ARCH_MXC_MX51_H__
#define __ASM_ARCH_MXC_MX51_H__
-#define __REG(x) (*((volatile u32 *)(x)))
-#define __REG16(x) (*((volatile u16 *)(x)))
-#define __REG8(x) (*((volatile u8 *)(x)))
/*
* IRAM
*/
@@ -207,7 +204,12 @@
#define BOARD_REV_1_0 0x0
#define BOARD_REV_2_0 0x1
-#ifndef __ASSEMBLY__
+#if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__))
+#include <asm/types.h>
+
+#define __REG(x) (*((volatile u32 *)(x)))
+#define __REG16(x) (*((volatile u16 *)(x)))
+#define __REG8(x) (*((volatile u8 *)(x)))
struct clkctl {
u32 ccr;
@@ -256,6 +258,22 @@ struct weim {
u32 cswcr2;
};
+/* GPIO Registers */
+struct gpio_regs {
+ u32 gpio_dr;
+ u32 gpio_dir;
+ u32 gpio_psr;
+};
+
+/* System Reset Controller (SRC) */
+struct src {
+ u32 scr;
+ u32 sbmr;
+ u32 srsr;
+ u32 reserved1[2];
+ u32 sisr;
+ u32 simr;
+};
#endif /* __ASSEMBLER__*/
#endif /* __ASM_ARCH_MXC_MX51_H__ */
diff --git a/arch/arm/include/asm/arch-mx51/mx51_pins.h b/arch/arm/include/asm/arch-mx51/mx51_pins.h
index ca26f41..b44ff25 100644
--- a/arch/arm/include/asm/arch-mx51/mx51_pins.h
+++ b/arch/arm/include/asm/arch-mx51/mx51_pins.h
@@ -368,6 +368,50 @@ enum iomux_pins {
MX51_PIN_GPIO1_7 = _MXC_BUILD_GPIO_PIN(0, 7, 0, 0x3E4, 0x810),
MX51_PIN_GPIO1_8 = _MXC_BUILD_GPIO_PIN(0, 8, 0, 0x3E8, 0x814),
MX51_PIN_GPIO1_9 = _MXC_BUILD_GPIO_PIN(0, 9, 0, 0x3EC, 0x818),
+
+ /* The following are PADS used for drive strength */
+
+ MX51_PIN_CTL_GRP_DDRPKS = _MXC_BUILD_NON_GPIO_PIN(0, 0x820),
+ MX51_PIN_CTL_GRP_PKEDDR = _MXC_BUILD_NON_GPIO_PIN(0, 0x838),
+ MX51_PIN_CTL_GRP_PKEADDR = _MXC_BUILD_NON_GPIO_PIN(0, 0x890),
+ MX51_PIN_CTL_GRP_DDRAPKS = _MXC_BUILD_NON_GPIO_PIN(0, 0x87C),
+ MX51_PIN_CTL_GRP_DDRAPUS = _MXC_BUILD_NON_GPIO_PIN(0, 0x84C),
+ MX51_PIN_CTL_GRP_DDRPUS = _MXC_BUILD_NON_GPIO_PIN(0, 0x884),
+ MX51_PIN_CTL_GRP_HYSDDR0 = _MXC_BUILD_NON_GPIO_PIN(0, 0x85C),
+ MX51_PIN_CTL_GRP_HYSDDR1 = _MXC_BUILD_NON_GPIO_PIN(0, 0x864),
+ MX51_PIN_CTL_GRP_HYSDDR2 = _MXC_BUILD_NON_GPIO_PIN(0, 0x86C),
+ MX51_PIN_CTL_GRP_HYSDDR3 = _MXC_BUILD_NON_GPIO_PIN(0, 0x874),
+ MX51_PIN_CTL_GRP_DDR_SR_B0 = _MXC_BUILD_NON_GPIO_PIN(0, 0x878),
+ MX51_PIN_CTL_GRP_DDR_SR_B1 = _MXC_BUILD_NON_GPIO_PIN(0, 0x880),
+ MX51_PIN_CTL_GRP_DDR_SR_B2 = _MXC_BUILD_NON_GPIO_PIN(0, 0x88C),
+ MX51_PIN_CTL_GRP_DDR_SR_B4 = _MXC_BUILD_NON_GPIO_PIN(0, 0x89C),
+ MX51_PIN_CTL_GRP_DRAM_B0 = _MXC_BUILD_NON_GPIO_PIN(0, 0x8A4),
+ MX51_PIN_CTL_GRP_DRAM_B1 = _MXC_BUILD_NON_GPIO_PIN(0, 0x8AC),
+ MX51_PIN_CTL_GRP_DRAM_B2 = _MXC_BUILD_NON_GPIO_PIN(0, 0x8B8),
+ MX51_PIN_CTL_GRP_DRAM_B4 = _MXC_BUILD_NON_GPIO_PIN(0, 0x82C),
+ MX51_PIN_CTL_GRP_INMODE1 = _MXC_BUILD_NON_GPIO_PIN(0, 0x8A0),
+ MX51_PIN_CTL_GRP_DDR_SR_A0 = _MXC_BUILD_NON_GPIO_PIN(0, 0x8B0),
+ MX51_PIN_CTL_GRP_EMI_DS5 = _MXC_BUILD_NON_GPIO_PIN(0, 0x8B4),
+ MX51_PIN_CTL_GRP_DDR_SR_A1 = _MXC_BUILD_NON_GPIO_PIN(0, 0x8BC),
+ MX51_PIN_CTL_GRP_DDR_A0 = _MXC_BUILD_NON_GPIO_PIN(0, 0x83C),
+ MX51_PIN_CTL_GRP_DDR_A1 = _MXC_BUILD_NON_GPIO_PIN(0, 0x848),
+ MX51_PIN_CTL_GRP_DISP_PKE0 = _MXC_BUILD_NON_GPIO_PIN(0, 0x868),
+ MX51_PIN_CTL_DRAM_RAS = _MXC_BUILD_NON_GPIO_PIN(0, 0x4A4),
+ MX51_PIN_CTL_DRAM_CAS = _MXC_BUILD_NON_GPIO_PIN(0, 0x4A8),
+ MX51_PIN_CTL_DRAM_SDWE = _MXC_BUILD_NON_GPIO_PIN(0, 0x4Ac),
+ MX51_PIN_CTL_DRAM_SDCKE0 = _MXC_BUILD_NON_GPIO_PIN(0, 0x4B0),
+ MX51_PIN_CTL_DRAM_SDCKE1 = _MXC_BUILD_NON_GPIO_PIN(0, 0x4B4),
+ MX51_PIN_CTL_DRAM_SDCLK = _MXC_BUILD_NON_GPIO_PIN(0, 0x4B8),
+ MX51_PIN_CTL_DRAM_SDQS0 = _MXC_BUILD_NON_GPIO_PIN(0, 0x4BC),
+ MX51_PIN_CTL_DRAM_SDQS1 = _MXC_BUILD_NON_GPIO_PIN(0, 0x4C0),
+ MX51_PIN_CTL_DRAM_SDQS2 = _MXC_BUILD_NON_GPIO_PIN(0, 0x4C4),
+ MX51_PIN_CTL_DRAM_SDQS3 = _MXC_BUILD_NON_GPIO_PIN(0, 0x4C8),
+ MX51_PIN_CTL_DRAM_CS0 = _MXC_BUILD_NON_GPIO_PIN(0, 0x4CC),
+ MX51_PIN_CTL_DRAM_CS1 = _MXC_BUILD_NON_GPIO_PIN(0, 0x4D0),
+ MX51_PIN_CTL_DRAM_DQM0 = _MXC_BUILD_NON_GPIO_PIN(0, 0x4D4),
+ MX51_PIN_CTL_DRAM_DQM1 = _MXC_BUILD_NON_GPIO_PIN(0, 0x4D8),
+ MX51_PIN_CTL_DRAM_DQM2 = _MXC_BUILD_NON_GPIO_PIN(0, 0x4DC),
+ MX51_PIN_CTL_DRAM_DQM3 = _MXC_BUILD_NON_GPIO_PIN(0, 0x4E0),
};
#endif /* __ASSEMBLY__ */
diff --git a/arch/arm/include/asm/arch-mx51/sys_proto.h b/arch/arm/include/asm/arch-mx51/sys_proto.h
index bf500a8..f687503 100644
--- a/arch/arm/include/asm/arch-mx51/sys_proto.h
+++ b/arch/arm/include/asm/arch-mx51/sys_proto.h
@@ -26,5 +26,6 @@
u32 get_cpu_rev(void);
#define is_soc_rev(rev) ((get_cpu_rev() & 0xFF) - rev)
+void sdelay(unsigned long);
#endif
diff --git a/board/davedenx/qong/qong.c b/board/davedenx/qong/qong.c
index e509383..9abc29c 100644
--- a/board/davedenx/qong/qong.c
+++ b/board/davedenx/qong/qong.c
@@ -27,6 +27,7 @@
#include <asm/arch/mx31-regs.h>
#include <nand.h>
#include <fsl_pmic.h>
+#include <mxc_gpio.h>
#include "qong_fpga.h"
DECLARE_GLOBAL_DATA_PTR;
@@ -41,9 +42,9 @@ int dram_init (void)
static void qong_fpga_reset(void)
{
- mx31_gpio_set(QONG_FPGA_RST_PIN, 0);
+ mxc_gpio_set(QONG_FPGA_RST_PIN, 0);
udelay(30);
- mx31_gpio_set(QONG_FPGA_RST_PIN, 1);
+ mxc_gpio_set(QONG_FPGA_RST_PIN, 1);
udelay(300);
}
@@ -66,11 +67,11 @@ int board_early_init_f (void)
/* FPGA reset Pin */
/* rstn = 0 */
- mx31_gpio_set(QONG_FPGA_RST_PIN, 0);
- mx31_gpio_direction(QONG_FPGA_RST_PIN, MX31_GPIO_DIRECTION_OUT);
+ mxc_gpio_set(QONG_FPGA_RST_PIN, 0);
+ mxc_gpio_direction(QONG_FPGA_RST_PIN, MXC_GPIO_DIRECTION_OUT);
/* set interrupt pin as input */
- mx31_gpio_direction(QONG_FPGA_IRQ_PIN, MX31_GPIO_DIRECTION_IN);
+ mxc_gpio_direction(QONG_FPGA_IRQ_PIN, MXC_GPIO_DIRECTION_IN);
#endif
@@ -206,27 +207,27 @@ static void board_nand_setup(void)
qong_fpga_reset();
/* Enable NAND flash */
- mx31_gpio_set(15, 1);
- mx31_gpio_set(14, 1);
- mx31_gpio_direction(15, MX31_GPIO_DIRECTION_OUT);
- mx31_gpio_direction(16, MX31_GPIO_DIRECTION_IN);
- mx31_gpio_direction(14, MX31_GPIO_DIRECTION_IN);
- mx31_gpio_set(15, 0);
+ mxc_gpio_set(15, 1);
+ mxc_gpio_set(14, 1);
+ mxc_gpio_direction(15, MXC_GPIO_DIRECTION_OUT);
+ mxc_gpio_direction(16, MXC_GPIO_DIRECTION_IN);
+ mxc_gpio_direction(14, MXC_GPIO_DIRECTION_IN);
+ mxc_gpio_set(15, 0);
}
int qong_nand_rdy(void *chip)
{
udelay(1);
- return mx31_gpio_get(16);
+ return mxc_gpio_get(16);
}
void qong_nand_select_chip(struct mtd_info *mtd, int chip)
{
if (chip >= 0)
- mx31_gpio_set(15, 0);
+ mxc_gpio_set(15, 0);
else
- mx31_gpio_set(15, 1);
+ mxc_gpio_set(15, 1);
}
diff --git a/board/freescale/mx51evk/mx51evk.c b/board/freescale/mx51evk/mx51evk.c
index 75d642b..84386e6 100644
--- a/board/freescale/mx51evk/mx51evk.c
+++ b/board/freescale/mx51evk/mx51evk.c
@@ -33,12 +33,10 @@
#include <fsl_esdhc.h>
#include <fsl_pmic.h>
#include <mc13892.h>
-#include "mx51evk.h"
DECLARE_GLOBAL_DATA_PTR;
static u32 system_rev;
-struct io_board_ctrl *mx51_io_board;
#ifdef CONFIG_FSL_ESDHC
struct fsl_esdhc_cfg esdhc_cfg[2] = {
diff --git a/board/ttcontrol/vision2/Makefile b/board/ttcontrol/vision2/Makefile
new file mode 100644
index 0000000..309e3a3
--- /dev/null
+++ b/board/ttcontrol/vision2/Makefile
@@ -0,0 +1,48 @@
+#
+# Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de>
+#
+# (C) Copyright 2009 Freescale Semiconductor, Inc.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS := vision2.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/ttcontrol/vision2/config.mk b/board/ttcontrol/vision2/config.mk
new file mode 100644
index 0000000..59f3367
--- /dev/null
+++ b/board/ttcontrol/vision2/config.mk
@@ -0,0 +1,25 @@
+#
+# Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+LDSCRIPT = $(CPUDIR)/$(SOC)/u-boot.lds
+TEXT_BASE = 0x97800000
+IMX_CONFIG = $(SRCTREE)/board/$(BOARDDIR)/imximage_hynix.cfg
diff --git a/board/ttcontrol/vision2/imximage_hynix.cfg b/board/ttcontrol/vision2/imximage_hynix.cfg
new file mode 100644
index 0000000..ed531db
--- /dev/null
+++ b/board/ttcontrol/vision2/imximage_hynix.cfg
@@ -0,0 +1,209 @@
+#
+# (C) Copyright 2009
+# Stefano Babic DENX Software Engineering sbabic@denx.de.
+#
+# (C) Copyright 2010
+# Klaus Steinhammer TTECH Control Gmbh kst@tttech.com
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not write to the Free Software
+# Foundation Inc. 51 Franklin Street Fifth Floor Boston,
+# MA 02110-1301 USA
+#
+# Refer docs/README.imxmage for more details about how-to configure
+# and create imximage boot image
+#
+# The syntax is taken as close as possible with the kwbimage
+
+# Boot Device : one of
+# spi, nand, onenand, sd
+
+BOOT_FROM spi
+
+# Device Configuration Data (DCD)
+#
+# Each entry must have the format:
+# Addr-type Address Value
+#
+# where:
+# Addr-type register length (1,2 or 4 bytes)
+# Address absolute address of the register
+# value value to be stored in the register
+
+#######################
+### Disable WDOG ###
+#######################
+DATA 2 0x73f98000 0x30
+
+#######################
+### SET DDR Clk ###
+#######################
+
+# CCM: CBMCR - ddr_clk_sel: axi_b (133MHz)
+DATA 4 0x73FD4018 0x000024C0
+
+# DOUBLE SPI CLK (13MHz->26 MHz Clock)
+DATA 4 0x73FD4038 0x2010241
+
+#IOMUXC_SW_PAD_CTL_PAD_CSPI1_MOSI HYS_ENABLE | DRV_MAX | SRE_FAST
+DATA 4 0x73fa8600 0x00000107
+#IOMUXC_SW_PAD_CTL_PAD_CSPI1_MISO HYS_ENABLE | DRV_MAX | SRE_FAST
+DATA 4 0x73fa8604 0x00000107
+#IOMUXC_SW_PAD_CTL_PAD_CSPI1_SS0 HYS_ENABLE | PKE_ENABLE | DRV_MAX | SRE_FAST
+DATA 4 0x73fa8608 0x00000187
+#IOMUXC_SW_PAD_CTL_PAD_CSPI1_SS1 HYS_ENABLE | PKE_ENABLE | DRV_MAX | SRE_FAST
+DATA 4 0x73fa860c 0x00000187
+#IOMUXC_SW_PAD_CTL_PAD_CSPI1_SCLK HYS_ENABLE | DRV_MAX | SRE_FAST
+DATA 4 0x73fa8614 0x00000107
+#IOMUXC_SW_PAD_CTL_PAD_DI1_PIN11 HYS_ENABLE | DRV_MAX | SRE_FAST (CSPI1_SS2)
+DATA 4 0x73fa86a8 0x00000187
+
+#######################
+### Settings IOMUXC ###
+#######################
+
+# DDR IOMUX configuration
+# Control, Data, Address pads are in their default state: HIGH DS, FAST SR.
+# IOMUXC_SW_PAD_CTL_PAD_DRAM_SDCLK MAX DS
+DATA 4 0x73fa84b8 0x000000e7
+# PVTC MAX (at GPC, PGR reg)
+#DATA 4 0x73FD8004 0x1fc00000
+
+#DQM0 DS high slew rate slow
+DATA 4 0x73fa84d4 0x000000e4
+#DQM1 DS high slew rate slow
+DATA 4 0x73fa84d8 0x000000e4
+#DQM2 DS high slew rate slow
+DATA 4 0x73fa84dc 0x000000e4
+#DQM3 DS high slew rate slow
+DATA 4 0x73fa84e0 0x000000e4
+
+#IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS0 DS high & SLEW slow
+DATA 4 0x73fa84bc 0x000000c4
+#IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS1 DS high & SLEW slow
+DATA 4 0x73fa84c0 0x000000c4
+#IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS2 DS high & SLEW slow
+DATA 4 0x73fa84c4 0x000000c4
+#IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS3 DS high & SLEW slow
+DATA 4 0x73fa84c8 0x000000c4
+
+#DRAM_DATA B0
+DATA 4 0x73fa88a4 0x00000004
+#DRAM_DATA B1
+DATA 4 0x73fa88ac 0x00000004
+#DRAM_DATA B2
+DATA 4 0x73fa88b8 0x00000004
+#DRAM_DATA B3
+DATA 4 0x73fa882c 0x00000004
+
+#DRAM_DATA B0 slew rate
+DATA 4 0x73fa8878 0x00000000
+#DRAM_DATA B1 slew rate
+DATA 4 0x73fa8880 0x00000000
+#DRAM_DATA B2 slew rate
+DATA 4 0x73fa888c 0x00000000
+#DRAM_DATA B3 slew rate
+DATA 4 0x73fa889c 0x00000000
+
+#######################
+### Configure SDRAM ###
+#######################
+
+# Configure CS0
+#######################
+
+# ESDCTL0: Enable controller
+DATA 4 0x83fd9000 0x83220000
+
+# Init DRAM on CS0
+# ESDSCR: Precharge command
+DATA 4 0x83fd9014 0x04008008
+# ESDSCR: Refresh command
+DATA 4 0x83fd9014 0x00008010
+# ESDSCR: Refresh command
+DATA 4 0x83fd9014 0x00008010
+# ESDSCR: LMR with CAS=3 and BL=3 (Burst Length = 8)
+DATA 4 0x83fd9014 0x00338018
+# ESDSCR: EMR with half Drive strength (= medium strength @ i.MX51)
+DATA 4 0x83fd9014 0x0020801a
+# ESDSCR
+DATA 4 0x83fd9014 0x00008000
+
+# ESDSCR: EMR with full Drive strength
+#DATA 4 0x83fd9014 0x0000801a
+
+# ESDCTL0: 14 ROW, 10 COL, 32Bit, SREF=8
+DATA 4 0x83fd9000 0xC3220000
+
+# ESDCFG0: tRFC:22clks, tXSR:28clks, tXP:2clks, tWTR:2clk, tRP:3clks, tMRD:2clks
+# tRAS:8clks, tRRD:2clks, tWR:3clks, tRCD:3clks, tRC:11clks
+#DATA 4 0x83fd9004 0xC33574AA
+
+#micron mDDR
+# ESDCFG0: tRFC:11clks, tXSR:19clks, tXP:1clks, tWTR:2clk, tRP:3clks, tMRD:2clks
+# tRAS:7clks, tRRD:2clks, tWR:3clks, tRCD:3clks, tRC:9clks
+#DATA 4 0x83FD9004 0x101564a8
+
+#hynix mDDR
+# ESDCFG0: tRFC:17clks, tXSR:21clks, tXP:3clks, tWTR:1clk, tRP:3clks, tMRD:2clks
+# tRAS:7clks, tRRD:2clks, tWR:3clks, tRCD:3clks, tRC:9clks
+DATA 4 0x83FD9004 0x704564a8
+
+# ESDMISC: AP=10, Bank interleaving on, MIF3 en, RALAT=2
+DATA 4 0x83fd9010 0x000a1700
+
+# Configure CS1
+#######################
+
+# ESDCTL1: Enable controller
+DATA 4 0x83fd9008 0x83220000
+
+# Init DRAM on CS1
+# ESDSCR: Precharge command
+DATA 4 0x83fd9014 0x0400800c
+# ESDSCR: Refresh command
+DATA 4 0x83fd9014 0x00008014
+# ESDSCR: Refresh command
+DATA 4 0x83fd9014 0x00008014
+# ESDSCR: LMR with CAS=3 and BL=3 (Burst Length = 8)
+DATA 4 0x83fd9014 0x0033801c
+# ESDSCR: EMR with half Drive strength (= medium strength @ i.MX51)
+DATA 4 0x83fd9014 0x0020801e
+# ESDSCR
+DATA 4 0x83fd9014 0x00008004
+
+# ESDCTL1: 14 ROW, 10 COL, 32Bit, SREF=8
+DATA 4 0x83fd9008 0xC3220000
+
+# ESDCFG1: tRFC:22clks, tXSR:28clks, tXP:2clks, tWTR:2clk, tRP:3clks, tMRD:2clks
+# tRAS:8clks, tRRD:2clks, tWR:3clks, tRCD:3clks, tRC:11clks
+#DATA 4 0x83fd900c 0xC33574AA
+
+#micron mDDR
+# ESDCFG1: tRFC:11clks, tXSR:19clks, tXP:1clks, tWTR:2clk, tRP:3clks, tMRD:2clks
+# tRAS:7clks, tRRD:2clks, tWR:3clks, tRCD:3clks, tRC:9clks
+#DATA 4 0x83FD900C 0x101564a8
+
+#hynix mDDR
+# ESDCFG0: tRFC:17clks, tXSR:21clks, tXP:3clks, tWTR:1clk, tRP:3clks, tMRD:2clks
+# tRAS:7clks, tRRD:2clks, tWR:3clks, tRCD:3clks, tRC:9clks
+DATA 4 0x83FD900C 0x704564a8
+
+# ESDSCR (mDRAM configuration finished)
+DATA 4 0x83FD9014 0x00000004
+
+# ESDSCR - clear "configuration request" bit
+DATA 4 0x83fd9014 0x00000000
diff --git a/board/ttcontrol/vision2/vision2.c b/board/ttcontrol/vision2/vision2.c
new file mode 100644
index 0000000..c991ee2
--- /dev/null
+++ b/board/ttcontrol/vision2/vision2.c
@@ -0,0 +1,711 @@
+/*
+ * (C) Copyright 2010
+ * Stefano Babic, DENX Software Engineering, sbabic@denx.de.
+ *
+ * (C) Copyright 2009 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/mx51_pins.h>
+#include <asm/arch/crm_regs.h>
+#include <asm/arch/iomux.h>
+#include <mxc_gpio.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/errno.h>
+#include <i2c.h>
+#include <mmc.h>
+#include <fsl_esdhc.h>
+#include <fsl_pmic.h>
+#include <mc13892.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static u32 system_rev;
+
+#ifdef CONFIG_HW_WATCHDOG
+#include <watchdog.h>
+
+void hw_watchdog_reset(void)
+{
+ int val;
+
+ /* toggle watchdog trigger pin */
+ val = mxc_gpio_get(66);
+ val = val ? 0 : 1;
+ mxc_gpio_set(66, val);
+}
+#endif
+
+static void init_drive_strength(void)
+{
+ mxc_iomux_set_pad(MX51_PIN_CTL_GRP_PKEDDR, PAD_CTL_DDR_INPUT_CMOS);
+ mxc_iomux_set_pad(MX51_PIN_CTL_GRP_PKEADDR, PAD_CTL_PKE_ENABLE);
+ mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDRAPKS, PAD_CTL_PUE_KEEPER);
+ mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDRAPUS, PAD_CTL_100K_PU);
+ mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDR_SR_A1, PAD_CTL_SRE_FAST);
+ mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDR_A0, PAD_CTL_DRV_HIGH);
+ mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDR_A1, PAD_CTL_DRV_HIGH);
+ mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_RAS,
+ PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
+ mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_CAS,
+ PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
+ mxc_iomux_set_pad(MX51_PIN_CTL_GRP_PKEDDR, PAD_CTL_PKE_ENABLE);
+ mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDRPKS, PAD_CTL_PUE_KEEPER);
+ mxc_iomux_set_pad(MX51_PIN_CTL_GRP_HYSDDR0, PAD_CTL_HYS_NONE);
+ mxc_iomux_set_pad(MX51_PIN_CTL_GRP_HYSDDR1, PAD_CTL_HYS_NONE);
+ mxc_iomux_set_pad(MX51_PIN_CTL_GRP_HYSDDR2, PAD_CTL_HYS_NONE);
+ mxc_iomux_set_pad(MX51_PIN_CTL_GRP_HYSDDR3, PAD_CTL_HYS_NONE);
+ mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDR_SR_B0, PAD_CTL_SRE_FAST);
+ mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDR_SR_B1, PAD_CTL_SRE_FAST);
+ mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDR_SR_B2, PAD_CTL_SRE_FAST);
+ mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDR_SR_B4, PAD_CTL_SRE_FAST);
+ mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDRPUS, PAD_CTL_100K_PU);
+ mxc_iomux_set_pad(MX51_PIN_CTL_GRP_INMODE1, PAD_CTL_DDR_INPUT_CMOS);
+ mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DRAM_B0, PAD_CTL_DRV_MEDIUM);
+ mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DRAM_B1, PAD_CTL_DRV_MEDIUM);
+ mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DRAM_B2, PAD_CTL_DRV_MEDIUM);
+ mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DRAM_B4, PAD_CTL_DRV_MEDIUM);
+
+ /* Setting pad options */
+ mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_SDWE,
+ PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
+ PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
+ mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_SDCKE0,
+ PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
+ PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
+ mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_SDCKE1,
+ PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
+ PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
+ mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_SDCLK,
+ PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
+ PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
+ mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_SDQS0,
+ PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
+ PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
+ mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_SDQS1,
+ PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
+ PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
+ mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_SDQS2,
+ PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
+ PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
+ mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_SDQS3,
+ PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
+ PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
+ mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_CS0,
+ PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
+ PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
+ mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_CS1,
+ PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
+ PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
+ mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_DQM0,
+ PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
+ PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
+ mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_DQM1,
+ PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
+ PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
+ mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_DQM2,
+ PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
+ PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
+ mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_DQM3,
+ PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
+ PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
+}
+
+u32 get_board_rev(void)
+{
+ system_rev = get_cpu_rev();
+
+ return system_rev;
+}
+
+int dram_init(void)
+{
+#ifdef CONFIG_SYS_ARM_WITHOUT_RELOC
+ gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+ gd->bd->bi_dram[0].size = get_ram_size((long *)PHYS_SDRAM_1,
+ PHYS_SDRAM_1_SIZE);
+#if (CONFIG_NR_DRAM_BANKS > 1)
+ gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
+ gd->bd->bi_dram[1].size = get_ram_size((long *)PHYS_SDRAM_2,
+ PHYS_SDRAM_2_SIZE);
+#endif
+#else
+ gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1,
+ PHYS_SDRAM_1_SIZE);
+#endif
+
+ return 0;
+}
+
+static void setup_weim(void)
+{
+ struct weim *pweim = (struct weim *)WEIM_BASE_ADDR;
+
+ pweim->csgcr1 = 0x004100b9;
+ pweim->csgcr2 = 0x00000001;
+ pweim->csrcr1 = 0x0a018000;
+ pweim->csrcr2 = 0;
+ pweim->cswcr1 = 0x0704a240;
+}
+
+static void setup_uart(void)
+{
+ unsigned int pad = PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE |
+ PAD_CTL_PUE_PULL | PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST;
+ /* console RX on Pin EIM_D25 */
+ mxc_request_iomux(MX51_PIN_EIM_D25, IOMUX_CONFIG_ALT3);
+ mxc_iomux_set_pad(MX51_PIN_EIM_D25, pad);
+ /* console TX on Pin EIM_D26 */
+ mxc_request_iomux(MX51_PIN_EIM_D26, IOMUX_CONFIG_ALT3);
+ mxc_iomux_set_pad(MX51_PIN_EIM_D26, pad);
+}
+
+#ifdef CONFIG_MXC_SPI
+void spi_io_init(void)
+{
+ /* 000: Select mux mode: ALT0 mux port: MOSI of instance: ecspi1 */
+ mxc_request_iomux(MX51_PIN_CSPI1_MOSI, IOMUX_CONFIG_ALT0);
+ mxc_iomux_set_pad(MX51_PIN_CSPI1_MOSI,
+ PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+
+ /* 000: Select mux mode: ALT0 mux port: MISO of instance: ecspi1. */
+ mxc_request_iomux(MX51_PIN_CSPI1_MISO, IOMUX_CONFIG_ALT0);
+ mxc_iomux_set_pad(MX51_PIN_CSPI1_MISO,
+ PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+
+ /* 000: Select mux mode: ALT0 mux port: SS0 of instance: ecspi1. */
+ mxc_request_iomux(MX51_PIN_CSPI1_SS0, IOMUX_CONFIG_ALT0);
+ mxc_iomux_set_pad(MX51_PIN_CSPI1_SS0,
+ PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE |
+ PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+
+ /*
+ * SS1 will be used as GPIO because of uninterrupted
+ * long SPI transmissions (GPIO4_25)
+ */
+ mxc_request_iomux(MX51_PIN_CSPI1_SS1, IOMUX_CONFIG_ALT3);
+ mxc_iomux_set_pad(MX51_PIN_CSPI1_SS1,
+ PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE |
+ PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+
+ /* 000: Select mux mode: ALT0 mux port: SS2 of instance: ecspi1. */
+ mxc_request_iomux(MX51_PIN_DI1_PIN11, IOMUX_CONFIG_ALT7);
+ mxc_iomux_set_pad(MX51_PIN_DI1_PIN11,
+ PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE |
+ PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+
+ /* 000: Select mux mode: ALT0 mux port: SCLK of instance: ecspi1. */
+ mxc_request_iomux(MX51_PIN_CSPI1_SCLK, IOMUX_CONFIG_ALT0);
+ mxc_iomux_set_pad(MX51_PIN_CSPI1_SCLK,
+ PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+}
+
+static void reset_peripherals(int reset)
+{
+ if (reset) {
+
+ /* reset_n is on NANDF_D15 */
+ mxc_gpio_set(89, 0);
+ mxc_gpio_direction(89, MXC_GPIO_DIRECTION_OUT);
+
+#ifdef CONFIG_VISION2_HW_1_0
+ /*
+ * set FEC Configuration lines
+ * set levels of FEC config lines
+ */
+ mxc_gpio_set(75, 0);
+ mxc_gpio_set(74, 1);
+ mxc_gpio_set(95, 1);
+ mxc_gpio_direction(75, MXC_GPIO_DIRECTION_OUT);
+ mxc_gpio_direction(74, MXC_GPIO_DIRECTION_OUT);
+ mxc_gpio_direction(95, MXC_GPIO_DIRECTION_OUT);
+
+ /* set direction of FEC config lines */
+ mxc_gpio_set(59, 0);
+ mxc_gpio_set(60, 0);
+ mxc_gpio_set(61, 0);
+ mxc_gpio_set(55, 1);
+ mxc_gpio_direction(59, MXC_GPIO_DIRECTION_OUT);
+ mxc_gpio_direction(60, MXC_GPIO_DIRECTION_OUT);
+ mxc_gpio_direction(61, MXC_GPIO_DIRECTION_OUT);
+ mxc_gpio_direction(55, MXC_GPIO_DIRECTION_OUT);
+
+ /* FEC_RXD1 - sel GPIO (2-23) for configuration -> 1 */
+ mxc_request_iomux(MX51_PIN_EIM_EB3, IOMUX_CONFIG_ALT1);
+ /* FEC_RXD2 - sel GPIO (2-27) for configuration -> 0 */
+ mxc_request_iomux(MX51_PIN_EIM_CS2, IOMUX_CONFIG_ALT1);
+ /* FEC_RXD3 - sel GPIO (2-28) for configuration -> 0 */
+ mxc_request_iomux(MX51_PIN_EIM_CS3, IOMUX_CONFIG_ALT1);
+ /* FEC_RXER - sel GPIO (2-29) for configuration -> 0 */
+ mxc_request_iomux(MX51_PIN_EIM_CS4, IOMUX_CONFIG_ALT1);
+ /* FEC_COL - sel GPIO (3-10) for configuration -> 1 */
+ mxc_request_iomux(MX51_PIN_NANDF_RB2, IOMUX_CONFIG_ALT3);
+ /* FEC_RCLK - sel GPIO (3-11) for configuration -> 0 */
+ mxc_request_iomux(MX51_PIN_NANDF_RB3, IOMUX_CONFIG_ALT3);
+ /* FEC_RXD0 - sel GPIO (3-31) for configuration -> 1 */
+ mxc_request_iomux(MX51_PIN_NANDF_D9, IOMUX_CONFIG_ALT3);
+#endif
+
+ /*
+ * activate reset_n pin
+ * Select mux mode: ALT3 mux port: NAND D15
+ */
+ mxc_request_iomux(MX51_PIN_NANDF_D15, IOMUX_CONFIG_ALT3);
+ mxc_iomux_set_pad(MX51_PIN_NANDF_D15,
+ PAD_CTL_DRV_VOT_HIGH | PAD_CTL_DRV_MAX);
+ } else {
+ /* set FEC Control lines */
+ mxc_gpio_direction(89, MXC_GPIO_DIRECTION_IN);
+ udelay(500);
+
+#ifdef CONFIG_VISION2_HW_1_0
+ /* FEC RDATA[3] */
+ mxc_request_iomux(MX51_PIN_EIM_CS3, IOMUX_CONFIG_ALT3);
+ mxc_iomux_set_pad(MX51_PIN_EIM_CS3, 0x180);
+
+ /* FEC RDATA[2] */
+ mxc_request_iomux(MX51_PIN_EIM_CS2, IOMUX_CONFIG_ALT3);
+ mxc_iomux_set_pad(MX51_PIN_EIM_CS2, 0x180);
+
+ /* FEC RDATA[1] */
+ mxc_request_iomux(MX51_PIN_EIM_EB3, IOMUX_CONFIG_ALT3);
+ mxc_iomux_set_pad(MX51_PIN_EIM_EB3, 0x180);
+
+ /* FEC RDATA[0] */
+ mxc_request_iomux(MX51_PIN_NANDF_D9, IOMUX_CONFIG_ALT2);
+ mxc_iomux_set_pad(MX51_PIN_NANDF_D9, 0x2180);
+
+ /* FEC RX_CLK */
+ mxc_request_iomux(MX51_PIN_NANDF_RB3, IOMUX_CONFIG_ALT1);
+ mxc_iomux_set_pad(MX51_PIN_NANDF_RB3, 0x2180);
+
+ /* FEC RX_ER */
+ mxc_request_iomux(MX51_PIN_EIM_CS4, IOMUX_CONFIG_ALT3);
+ mxc_iomux_set_pad(MX51_PIN_EIM_CS4, 0x180);
+
+ /* FEC COL */
+ mxc_request_iomux(MX51_PIN_NANDF_RB2, IOMUX_CONFIG_ALT1);
+ mxc_iomux_set_pad(MX51_PIN_NANDF_RB2, 0x2180);
+#endif
+ }
+}
+
+static void power_init_mx51(void)
+{
+ unsigned int val;
+
+ /* Write needed to Power Gate 2 register */
+ val = pmic_reg_read(REG_POWER_MISC);
+
+ /* enable VCAM with 2.775V to enable read from PMIC */
+ val = VCAMCONFIG | VCAMEN;
+ pmic_reg_write(REG_MODE_1, val);
+
+ /*
+ * Set switchers in Auto in NORMAL mode & STANDBY mode
+ * Setup the switcher mode for SW1 & SW2
+ */
+ val = pmic_reg_read(REG_SW_4);
+ val = (val & ~((SWMODE_MASK << SWMODE1_SHIFT) |
+ (SWMODE_MASK << SWMODE2_SHIFT)));
+ val |= (SWMODE_AUTO_AUTO << SWMODE1_SHIFT) |
+ (SWMODE_AUTO_AUTO << SWMODE2_SHIFT);
+ pmic_reg_write(REG_SW_4, val);
+
+ /* Setup the switcher mode for SW3 & SW4 */
+ val = pmic_reg_read(REG_SW_5);
+ val &= ~((SWMODE_MASK << SWMODE4_SHIFT) |
+ (SWMODE_MASK << SWMODE3_SHIFT));
+ val |= (SWMODE_AUTO_AUTO << SWMODE4_SHIFT) |
+ (SWMODE_AUTO_AUTO << SWMODE3_SHIFT);
+ pmic_reg_write(REG_SW_5, val);
+
+
+ /* Set VGEN3 to 1.8V, VCAM to 3.0V */
+ val = pmic_reg_read(REG_SETTING_0);
+ val &= ~(VCAM_MASK | VGEN3_MASK);
+ val |= VCAM_3_0;
+ pmic_reg_write(REG_SETTING_0, val);
+
+ /* Set VVIDEO to 2.775V, VAUDIO to 3V0, VSD to 1.8V */
+ val = pmic_reg_read(REG_SETTING_1);
+ val &= ~(VVIDEO_MASK | VSD_MASK | VAUDIO_MASK);
+ val |= VVIDEO_2_775 | VAUDIO_3_0 | VSD_1_8;
+ pmic_reg_write(REG_SETTING_1, val);
+
+ /* Configure VGEN3 and VCAM regulators to use external PNP */
+ val = VGEN3CONFIG | VCAMCONFIG;
+ pmic_reg_write(REG_MODE_1, val);
+ udelay(200);
+
+ /* Enable VGEN3, VCAM, VAUDIO, VVIDEO, VSD regulators */
+ val = VGEN3EN | VGEN3CONFIG | VCAMEN | VCAMCONFIG |
+ VVIDEOEN | VAUDIOEN | VSDEN;
+ pmic_reg_write(REG_MODE_1, val);
+
+ val = pmic_reg_read(REG_POWER_CTL2);
+ val |= WDIRESET;
+ pmic_reg_write(REG_POWER_CTL2, val);
+
+ udelay(2500);
+
+}
+#endif
+
+static void setup_gpios(void)
+{
+ unsigned int i;
+
+ /* CAM_SUP_DISn, GPIO1_7 */
+ mxc_request_iomux(MX51_PIN_GPIO1_7, IOMUX_CONFIG_ALT0);
+ mxc_iomux_set_pad(MX51_PIN_GPIO1_7, 0x82);
+
+ /* DAB Display EN, GPIO3_1 */
+ mxc_request_iomux(MX51_PIN_DI1_PIN12, IOMUX_CONFIG_ALT4);
+ mxc_iomux_set_pad(MX51_PIN_DI1_PIN12, 0x82);
+
+ /* WDOG_TRIGGER, GPIO3_2 */
+ mxc_request_iomux(MX51_PIN_DI1_PIN13, IOMUX_CONFIG_ALT4);
+ mxc_iomux_set_pad(MX51_PIN_DI1_PIN13, 0x82);
+
+ /* Now we need to trigger the watchdog */
+ WATCHDOG_RESET();
+
+ /* Display2 TxEN, GPIO3_3 */
+ mxc_request_iomux(MX51_PIN_DI1_D0_CS, IOMUX_CONFIG_ALT4);
+ mxc_iomux_set_pad(MX51_PIN_DI1_D0_CS, 0x82);
+
+ /* DAB Light EN, GPIO3_4 */
+ mxc_request_iomux(MX51_PIN_DI1_D1_CS, IOMUX_CONFIG_ALT4);
+ mxc_iomux_set_pad(MX51_PIN_DI1_D1_CS, 0x82);
+
+ /* AUDIO_MUTE, GPIO3_5 */
+ mxc_request_iomux(MX51_PIN_DISPB2_SER_DIN, IOMUX_CONFIG_ALT4);
+ mxc_iomux_set_pad(MX51_PIN_DISPB2_SER_DIN, 0x82);
+
+ /* SPARE_OUT, GPIO3_6 */
+ mxc_request_iomux(MX51_PIN_DISPB2_SER_DIO, IOMUX_CONFIG_ALT4);
+ mxc_iomux_set_pad(MX51_PIN_DISPB2_SER_DIO, 0x82);
+
+ /* BEEPER_EN, GPIO3_26 */
+ mxc_request_iomux(MX51_PIN_NANDF_D14, IOMUX_CONFIG_ALT3);
+ mxc_iomux_set_pad(MX51_PIN_NANDF_D14, 0x82);
+
+ /* POWER_OFF, GPIO3_27 */
+ mxc_request_iomux(MX51_PIN_NANDF_D13, IOMUX_CONFIG_ALT3);
+ mxc_iomux_set_pad(MX51_PIN_NANDF_D13, 0x82);
+
+ /* FRAM_WE, GPIO3_30 */
+ mxc_request_iomux(MX51_PIN_NANDF_D10, IOMUX_CONFIG_ALT3);
+ mxc_iomux_set_pad(MX51_PIN_NANDF_D10, 0x82);
+
+ /* EXPANSION_EN, GPIO4_26 */
+ mxc_request_iomux(MX51_PIN_CSPI1_RDY, IOMUX_CONFIG_ALT3);
+ mxc_iomux_set_pad(MX51_PIN_CSPI1_RDY, 0x82);
+
+ /*
+ * Set GPIO1_4 to high and output; it is used to reset
+ * the system on reboot
+ */
+ mxc_gpio_set(4, 1);
+ mxc_gpio_direction(4, MXC_GPIO_DIRECTION_OUT);
+
+ mxc_gpio_set(7, 0);
+ mxc_gpio_direction(7, MXC_GPIO_DIRECTION_OUT);
+ for (i = 65; i < 71; i++) {
+ mxc_gpio_set(i, 0);
+ mxc_gpio_direction(i, MXC_GPIO_DIRECTION_OUT);
+ }
+
+ mxc_gpio_set(94, 0);
+ mxc_gpio_direction(94, MXC_GPIO_DIRECTION_OUT);
+
+ /* Set POWER_OFF high */
+ mxc_gpio_set(91, 1);
+ mxc_gpio_direction(91, MXC_GPIO_DIRECTION_OUT);
+
+ mxc_gpio_set(90, 0);
+ mxc_gpio_direction(90, MXC_GPIO_DIRECTION_OUT);
+
+ mxc_gpio_set(122, 0);
+ mxc_gpio_direction(122, MXC_GPIO_DIRECTION_OUT);
+
+ mxc_gpio_set(121, 1);
+ mxc_gpio_direction(121, MXC_GPIO_DIRECTION_OUT);
+
+ WATCHDOG_RESET();
+}
+
+static void setup_fec(void)
+{
+ /*FEC_MDIO*/
+ mxc_request_iomux(MX51_PIN_EIM_EB2, IOMUX_CONFIG_ALT3);
+ mxc_iomux_set_pad(MX51_PIN_EIM_EB2, 0x1FD);
+
+ /*FEC_MDC*/
+ mxc_request_iomux(MX51_PIN_NANDF_CS3, IOMUX_CONFIG_ALT2);
+ mxc_iomux_set_pad(MX51_PIN_NANDF_CS3, 0x2004);
+
+ /* FEC RDATA[3] */
+ mxc_request_iomux(MX51_PIN_EIM_CS3, IOMUX_CONFIG_ALT3);
+ mxc_iomux_set_pad(MX51_PIN_EIM_CS3, 0x180);
+
+ /* FEC RDATA[2] */
+ mxc_request_iomux(MX51_PIN_EIM_CS2, IOMUX_CONFIG_ALT3);
+ mxc_iomux_set_pad(MX51_PIN_EIM_CS2, 0x180);
+
+ /* FEC RDATA[1] */
+ mxc_request_iomux(MX51_PIN_EIM_EB3, IOMUX_CONFIG_ALT3);
+ mxc_iomux_set_pad(MX51_PIN_EIM_EB3, 0x180);
+
+ /* FEC RDATA[0] */
+ mxc_request_iomux(MX51_PIN_NANDF_D9, IOMUX_CONFIG_ALT2);
+ mxc_iomux_set_pad(MX51_PIN_NANDF_D9, 0x2180);
+
+ /* FEC TDATA[3] */
+ mxc_request_iomux(MX51_PIN_NANDF_CS6, IOMUX_CONFIG_ALT2);
+ mxc_iomux_set_pad(MX51_PIN_NANDF_CS6, 0x2004);
+
+ /* FEC TDATA[2] */
+ mxc_request_iomux(MX51_PIN_NANDF_CS5, IOMUX_CONFIG_ALT2);
+ mxc_iomux_set_pad(MX51_PIN_NANDF_CS5, 0x2004);
+
+ /* FEC TDATA[1] */
+ mxc_request_iomux(MX51_PIN_NANDF_CS4, IOMUX_CONFIG_ALT2);
+ mxc_iomux_set_pad(MX51_PIN_NANDF_CS4, 0x2004);
+
+ /* FEC TDATA[0] */
+ mxc_request_iomux(MX51_PIN_NANDF_D8, IOMUX_CONFIG_ALT2);
+ mxc_iomux_set_pad(MX51_PIN_NANDF_D8, 0x2004);
+
+ /* FEC TX_EN */
+ mxc_request_iomux(MX51_PIN_NANDF_CS7, IOMUX_CONFIG_ALT1);
+ mxc_iomux_set_pad(MX51_PIN_NANDF_CS7, 0x2004);
+
+ /* FEC TX_ER */
+ mxc_request_iomux(MX51_PIN_NANDF_CS2, IOMUX_CONFIG_ALT2);
+ mxc_iomux_set_pad(MX51_PIN_NANDF_CS2, 0x2004);
+
+ /* FEC TX_CLK */
+ mxc_request_iomux(MX51_PIN_NANDF_RDY_INT, IOMUX_CONFIG_ALT1);
+ mxc_iomux_set_pad(MX51_PIN_NANDF_RDY_INT, 0x2180);
+
+ /* FEC TX_COL */
+ mxc_request_iomux(MX51_PIN_NANDF_RB2, IOMUX_CONFIG_ALT1);
+ mxc_iomux_set_pad(MX51_PIN_NANDF_RB2, 0x2180);
+
+ /* FEC RX_CLK */
+ mxc_request_iomux(MX51_PIN_NANDF_RB3, IOMUX_CONFIG_ALT1);
+ mxc_iomux_set_pad(MX51_PIN_NANDF_RB3, 0x2180);
+
+ /* FEC RX_CRS */
+ mxc_request_iomux(MX51_PIN_EIM_CS5, IOMUX_CONFIG_ALT3);
+ mxc_iomux_set_pad(MX51_PIN_EIM_CS5, 0x180);
+
+ /* FEC RX_ER */
+ mxc_request_iomux(MX51_PIN_EIM_CS4, IOMUX_CONFIG_ALT3);
+ mxc_iomux_set_pad(MX51_PIN_EIM_CS4, 0x180);
+
+ /* FEC RX_DV */
+ mxc_request_iomux(MX51_PIN_NANDF_D11, IOMUX_CONFIG_ALT2);
+ mxc_iomux_set_pad(MX51_PIN_NANDF_D11, 0x2180);
+}
+
+struct fsl_esdhc_cfg esdhc_cfg[1] = {
+ {MMC_SDHC1_BASE_ADDR, 1},
+};
+
+int get_mmc_getcd(u8 *cd, struct mmc *mmc)
+{
+ struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
+
+ if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR)
+ *cd = mxc_gpio_get(0);
+ else
+ *cd = 0;
+
+ return 0;
+}
+
+#ifdef CONFIG_FSL_ESDHC
+int board_mmc_init(bd_t *bis)
+{
+ mxc_request_iomux(MX51_PIN_SD1_CMD,
+ IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
+ mxc_request_iomux(MX51_PIN_SD1_CLK,
+ IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
+ mxc_request_iomux(MX51_PIN_SD1_DATA0,
+ IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
+ mxc_request_iomux(MX51_PIN_SD1_DATA1,
+ IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
+ mxc_request_iomux(MX51_PIN_SD1_DATA2,
+ IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
+ mxc_request_iomux(MX51_PIN_SD1_DATA3,
+ IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
+ mxc_iomux_set_pad(MX51_PIN_SD1_CMD,
+ PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH |
+ PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU |
+ PAD_CTL_PUE_PULL |
+ PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
+ mxc_iomux_set_pad(MX51_PIN_SD1_CLK,
+ PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH |
+ PAD_CTL_HYS_NONE | PAD_CTL_47K_PU |
+ PAD_CTL_PUE_PULL |
+ PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
+ mxc_iomux_set_pad(MX51_PIN_SD1_DATA0,
+ PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH |
+ PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU |
+ PAD_CTL_PUE_PULL |
+ PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
+ mxc_iomux_set_pad(MX51_PIN_SD1_DATA1,
+ PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH |
+ PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU |
+ PAD_CTL_PUE_PULL |
+ PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
+ mxc_iomux_set_pad(MX51_PIN_SD1_DATA2,
+ PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH |
+ PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU |
+ PAD_CTL_PUE_PULL |
+ PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
+ mxc_iomux_set_pad(MX51_PIN_SD1_DATA3,
+ PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH |
+ PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PD |
+ PAD_CTL_PUE_PULL |
+ PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
+ mxc_request_iomux(MX51_PIN_GPIO1_0,
+ IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
+ mxc_iomux_set_pad(MX51_PIN_GPIO1_0,
+ PAD_CTL_HYS_ENABLE);
+ mxc_request_iomux(MX51_PIN_GPIO1_1,
+ IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
+ mxc_iomux_set_pad(MX51_PIN_GPIO1_1,
+ PAD_CTL_HYS_ENABLE);
+
+ return fsl_esdhc_initialize(bis, &esdhc_cfg[0]);
+}
+#endif
+
+int board_early_init_f(void)
+{
+
+
+ init_drive_strength();
+
+ /* Setup debug led */
+ mxc_gpio_set(6, 0);
+ mxc_gpio_direction(6, MXC_GPIO_DIRECTION_OUT);
+ mxc_request_iomux(MX51_PIN_GPIO1_6, IOMUX_CONFIG_ALT0);
+ mxc_iomux_set_pad(MX51_PIN_GPIO1_6, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+
+ /* wait a little while to give the pll time to settle */
+ sdelay(100000);
+
+ setup_weim();
+ setup_uart();
+ setup_fec();
+ setup_gpios();
+
+ spi_io_init();
+
+ return 0;
+}
+
+int board_init(void)
+{
+#ifdef CONFIG_SYS_ARM_WITHOUT_RELOC
+ board_early_init_f();
+#endif
+ gd->bd->bi_arch_number = MACH_TYPE_TTC_VISION2; /* board id for linux */
+ /* address of boot parameters */
+ gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
+
+ return 0;
+}
+
+int board_late_init(void)
+{
+ power_init_mx51();
+
+ reset_peripherals(1);
+ udelay(2000);
+ reset_peripherals(0);
+ udelay(2000);
+
+ /* Early revisions require a second reset */
+#ifdef CONFIG_VISION2_HW_1_0
+ reset_peripherals(1);
+ udelay(2000);
+ reset_peripherals(0);
+ udelay(2000);
+#endif
+
+ return 0;
+}
+
+int checkboard(void)
+{
+ u32 system_rev = get_cpu_rev();
+ u32 cause;
+ struct src *src_regs = (struct src *)SRC_BASE_ADDR;
+
+ puts("Board: TTControl Vision II CPU V");
+
+ switch (system_rev & 0xff) {
+ case CHIP_REV_3_0:
+ puts("3.0 [");
+ break;
+ case CHIP_REV_2_5:
+ puts("2.5 [");
+ break;
+ case CHIP_REV_2_0:
+ puts("2.0 [");
+ break;
+ case CHIP_REV_1_1:
+ puts("1.1 [");
+ break;
+ case CHIP_REV_1_0:
+ default:
+ puts("1.0 [");
+ break;
+ }
+
+ cause = src_regs->srsr;
+ switch (cause) {
+ case 0x0001:
+ puts("POR");
+ break;
+ case 0x0009:
+ puts("RST");
+ break;
+ case 0x0010:
+ case 0x0011:
+ puts("WDOG");
+ break;
+ default:
+ printf("unknown 0x%x", cause);
+ }
+ puts("]\n");
+
+ return 0;
+}
+
diff --git a/boards.cfg b/boards.cfg
index 202de1a..62ffa42 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -47,6 +47,7 @@ jadecpu arm arm926ejs jadecpu syteco mb86r0x
suen3 arm arm926ejs km_arm keymile kirkwood
rd6281a arm arm926ejs - Marvell kirkwood
mx51evk arm armv7 mx51evk freescale mx51
+vision2 arm armv7 vision2 ttcontrol mx51
actux1 arm ixp
actux2 arm ixp
actux3 arm ixp
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 07d395d..a0f4552 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -27,7 +27,7 @@ LIB := $(obj)libgpio.a
COBJS-$(CONFIG_AT91_GPIO) += at91_gpio.o
COBJS-$(CONFIG_KIRKWOOD_GPIO) += kw_gpio.o
-COBJS-$(CONFIG_MX31_GPIO) += mx31_gpio.o
+COBJS-$(CONFIG_MXC_GPIO) += mxc_gpio.o
COBJS-$(CONFIG_PCA953X) += pca953x.o
COBJS-$(CONFIG_S5P) += s5p_gpio.o
diff --git a/drivers/gpio/mx31_gpio.c b/drivers/gpio/mxc_gpio.c
index b07f038..663141f 100644
--- a/drivers/gpio/mx31_gpio.c
+++ b/drivers/gpio/mxc_gpio.c
@@ -21,19 +21,29 @@
* MA 02111-1307 USA
*/
#include <common.h>
-#include <asm/arch/mx31.h>
+#ifdef CONFIG_MX31
#include <asm/arch/mx31-regs.h>
+#endif
+#ifdef CONFIG_MX51
+#include <asm/arch/imx-regs.h>
+#endif
+#include <asm/io.h>
+#include <mxc_gpio.h>
/* GPIO port description */
static unsigned long gpio_ports[] = {
- [0] = GPIO1_BASE,
- [1] = GPIO2_BASE,
- [2] = GPIO3_BASE,
+ [0] = GPIO1_BASE_ADDR,
+ [1] = GPIO2_BASE_ADDR,
+ [2] = GPIO3_BASE_ADDR,
+#ifdef CONFIG_MX51
+ [3] = GPIO4_BASE_ADDR,
+#endif
};
-int mx31_gpio_direction(unsigned int gpio, enum mx31_gpio_direction direction)
+int mxc_gpio_direction(unsigned int gpio, enum mxc_gpio_direction direction)
{
unsigned int port = gpio >> 5;
+ struct gpio_regs *regs;
u32 l;
if (port >= ARRAY_SIZE(gpio_ports))
@@ -41,22 +51,26 @@ int mx31_gpio_direction(unsigned int gpio, enum mx31_gpio_direction direction)
gpio &= 0x1f;
- l = __REG(gpio_ports[port] + GPIO_GDIR);
+ regs = (struct gpio_regs *)gpio_ports[port];
+
+ l = readl(&regs->gpio_dir);
+
switch (direction) {
- case MX31_GPIO_DIRECTION_OUT:
+ case MXC_GPIO_DIRECTION_OUT:
l |= 1 << gpio;
break;
- case MX31_GPIO_DIRECTION_IN:
+ case MXC_GPIO_DIRECTION_IN:
l &= ~(1 << gpio);
}
- __REG(gpio_ports[port] + GPIO_GDIR) = l;
+ writel(l, &regs->gpio_dir);
return 0;
}
-void mx31_gpio_set(unsigned int gpio, unsigned int value)
+void mxc_gpio_set(unsigned int gpio, unsigned int value)
{
unsigned int port = gpio >> 5;
+ struct gpio_regs *regs;
u32 l;
if (port >= ARRAY_SIZE(gpio_ports))
@@ -64,17 +78,20 @@ void mx31_gpio_set(unsigned int gpio, unsigned int value)
gpio &= 0x1f;
- l = __REG(gpio_ports[port] + GPIO_DR);
+ regs = (struct gpio_regs *)gpio_ports[port];
+
+ l = readl(&regs->gpio_dr);
if (value)
l |= 1 << gpio;
else
l &= ~(1 << gpio);
- __REG(gpio_ports[port] + GPIO_DR) = l;
+ writel(l, &regs->gpio_dr);
}
-int mx31_gpio_get(unsigned int gpio)
+int mxc_gpio_get(unsigned int gpio)
{
unsigned int port = gpio >> 5;
+ struct gpio_regs *regs;
u32 l;
if (port >= ARRAY_SIZE(gpio_ports))
@@ -82,7 +99,9 @@ int mx31_gpio_get(unsigned int gpio)
gpio &= 0x1f;
- l = (__REG(gpio_ports[port] + GPIO_DR) >> gpio) & 0x01;
+ regs = (struct gpio_regs *)gpio_ports[port];
+
+ l = (readl(&regs->gpio_dr) >> gpio) & 0x01;
return l;
}
diff --git a/drivers/misc/fsl_pmic.c b/drivers/misc/fsl_pmic.c
index dca0a1d..5ee1de1 100644
--- a/drivers/misc/fsl_pmic.c
+++ b/drivers/misc/fsl_pmic.c
@@ -46,6 +46,7 @@ void pmic_spi_free(struct spi_slave *slave)
u32 pmic_reg(u32 reg, u32 val, u32 write)
{
u32 pmic_tx, pmic_rx;
+ u32 tmp;
if (!slave) {
slave = pmic_spi_probe();
@@ -65,7 +66,9 @@ u32 pmic_reg(u32 reg, u32 val, u32 write)
pmic_tx = (write << 31) | (reg << 25) | (val & 0x00FFFFFF);
- if (spi_xfer(slave, 4 << 3, &pmic_tx, &pmic_rx,
+ tmp = cpu_to_be32(pmic_tx);
+
+ if (spi_xfer(slave, 4 << 3, &tmp, &pmic_rx,
SPI_XFER_BEGIN | SPI_XFER_END)) {
spi_release_bus(slave);
return -1;
@@ -73,7 +76,8 @@ u32 pmic_reg(u32 reg, u32 val, u32 write)
if (write) {
pmic_tx &= ~(1 << 31);
- if (spi_xfer(slave, 4 << 3, &pmic_tx, &pmic_rx,
+ tmp = cpu_to_be32(pmic_tx);
+ if (spi_xfer(slave, 4 << 3, &tmp, &pmic_rx,
SPI_XFER_BEGIN | SPI_XFER_END)) {
spi_release_bus(slave);
return -1;
@@ -81,7 +85,7 @@ u32 pmic_reg(u32 reg, u32 val, u32 write)
}
spi_release_bus(slave);
- return pmic_rx;
+ return cpu_to_be32(pmic_rx);
}
void pmic_reg_write(u32 reg, u32 value)
diff --git a/drivers/serial/serial_mxc.c b/drivers/serial/serial_mxc.c
index 4b93e7b..f96b21f 100644
--- a/drivers/serial/serial_mxc.c
+++ b/drivers/serial/serial_mxc.c
@@ -18,6 +18,7 @@
*/
#include <common.h>
+#include <watchdog.h>
#ifdef CONFIG_MX31
#include <asm/arch/mx31.h>
#else
@@ -189,7 +190,8 @@ void serial_setbrg (void)
int serial_getc (void)
{
- while (__REG(UART_PHYS + UTS) & UTS_RXEMPTY);
+ while (__REG(UART_PHYS + UTS) & UTS_RXEMPTY)
+ WATCHDOG_RESET();
return (__REG(UART_PHYS + URXD) & URXD_RX_DATA); /* mask out status from upper word */
}
@@ -198,7 +200,8 @@ void serial_putc (const char c)
__REG(UART_PHYS + UTXD) = c;
/* wait for transmitter to be ready */
- while(!(__REG(UART_PHYS + UTS) & UTS_TXEMPTY));
+ while (!(__REG(UART_PHYS + UTS) & UTS_TXEMPTY))
+ WATCHDOG_RESET();
/* If \n, also do \r */
if (c == '\n')
diff --git a/drivers/spi/mxc_spi.c b/drivers/spi/mxc_spi.c
index e15a63c..d558137 100644
--- a/drivers/spi/mxc_spi.c
+++ b/drivers/spi/mxc_spi.c
@@ -23,6 +23,7 @@
#include <spi.h>
#include <asm/errno.h>
#include <asm/io.h>
+#include <mxc_gpio.h>
#ifdef CONFIG_MX27
/* i.MX27 has a completely wrong register layout and register definitions in the
@@ -61,6 +62,7 @@
#define MXC_CSPICTRL_MAXBITS 0x1f
#define MXC_CSPIPERIOD_32KHZ (1 << 15)
+#define MAX_SPI_BYTES 4
static unsigned long spi_bases[] = {
0x43fa4000,
@@ -68,9 +70,6 @@ static unsigned long spi_bases[] = {
0x53f84000,
};
-#define OUT MX31_GPIO_DIRECTION_OUT
-#define mxc_gpio_direction mx31_gpio_direction
-#define mxc_gpio_set mx31_gpio_set
#elif defined(CONFIG_MX51)
#include <asm/arch/imx-regs.h>
#include <asm/arch/clock.h>
@@ -97,6 +96,7 @@ static unsigned long spi_bases[] = {
#define MXC_CSPICTRL_RXOVF (1 << 6)
#define MXC_CSPIPERIOD_32KHZ (1 << 15)
+#define MAX_SPI_BYTES 32
/* Bit position inside CTRL register to be associated with SS */
#define MXC_CSPICTRL_CHAN 18
@@ -111,13 +111,12 @@ static unsigned long spi_bases[] = {
CSPI2_BASE_ADDR,
CSPI3_BASE_ADDR,
};
-#define mxc_gpio_direction(gpio, dir) (0)
-#define mxc_gpio_set(gpio, value) {}
-#define OUT 1
#else
#error "Unsupported architecture"
#endif
+#define OUT MXC_GPIO_DIRECTION_OUT
+
struct mxc_spi_slave {
struct spi_slave slave;
unsigned long base;
@@ -126,6 +125,7 @@ struct mxc_spi_slave {
u32 cfg_reg;
#endif
int gpio;
+ int ss_pol;
};
static inline struct mxc_spi_slave *to_mxc_spi_slave(struct spi_slave *slave)
@@ -147,7 +147,7 @@ void spi_cs_activate(struct spi_slave *slave)
{
struct mxc_spi_slave *mxcs = to_mxc_spi_slave(slave);
if (mxcs->gpio > 0)
- mxc_gpio_set(mxcs->gpio, mxcs->ctrl_reg & MXC_CSPICTRL_SSPOL);
+ mxc_gpio_set(mxcs->gpio, mxcs->ss_pol);
}
void spi_cs_deactivate(struct spi_slave *slave)
@@ -155,7 +155,7 @@ void spi_cs_deactivate(struct spi_slave *slave)
struct mxc_spi_slave *mxcs = to_mxc_spi_slave(slave);
if (mxcs->gpio > 0)
mxc_gpio_set(mxcs->gpio,
- !(mxcs->ctrl_reg & MXC_CSPICTRL_SSPOL));
+ !(mxcs->ss_pol));
}
#ifdef CONFIG_MX51
@@ -217,7 +217,7 @@ static s32 spi_cfg(struct mxc_spi_slave *mxcs, unsigned int cs,
if (mode & SPI_CS_HIGH)
ss_pol = 1;
- if (!(mode & SPI_CPOL))
+ if (mode & SPI_CPOL)
sclkpol = 1;
if (mode & SPI_CPHA)
@@ -254,13 +254,15 @@ static s32 spi_cfg(struct mxc_spi_slave *mxcs, unsigned int cs,
}
#endif
-static u32 spi_xchg_single(struct spi_slave *slave, u32 data, int bitlen,
- unsigned long flags)
+int spi_xchg_single(struct spi_slave *slave, unsigned int bitlen,
+ const u8 *dout, u8 *din, unsigned long flags)
{
struct mxc_spi_slave *mxcs = to_mxc_spi_slave(slave);
+ int nbytes = (bitlen + 7) / 8;
+ u32 data, cnt, i;
- if (flags & SPI_XFER_BEGIN)
- spi_cs_activate(slave);
+ debug("%s: bitlen %d dout 0x%x din 0x%x\n",
+ __func__, bitlen, (u32)dout, (u32)din);
mxcs->ctrl_reg = (mxcs->ctrl_reg &
~MXC_CSPICTRL_BITCOUNT(MXC_CSPICTRL_MAXBITS)) |
@@ -275,8 +277,46 @@ static u32 spi_xchg_single(struct spi_slave *slave, u32 data, int bitlen,
reg_write(mxcs->base + MXC_CSPISTAT,
MXC_CSPICTRL_TC | MXC_CSPICTRL_RXOVF);
- debug("Sending SPI 0x%x\n", data);
- reg_write(mxcs->base + MXC_CSPITXDATA, data);
+ /*
+ * The SPI controller works only with words,
+ * check if less than a word is sent.
+ * Access to the FIFO is only 32 bit
+ */
+ if (bitlen % 32) {
+ data = 0;
+ cnt = (bitlen % 32) / 8;
+ if (dout) {
+ for (i = 0; i < cnt; i++) {
+ data = (data << 8) | (*dout++ & 0xFF);
+ }
+ }
+ debug("Sending SPI 0x%x\n", data);
+
+ reg_write(mxcs->base + MXC_CSPITXDATA, data);
+ nbytes -= cnt;
+ }
+
+ data = 0;
+
+ while (nbytes > 0) {
+ data = 0;
+ if (dout) {
+ /* Buffer is not 32-bit aligned */
+ if ((unsigned long)dout & 0x03) {
+ data = 0;
+ for (i = 0; i < 4; i++, data <<= 8) {
+ data = (data << 8) | (*dout++ & 0xFF);
+ }
+ } else {
+ data = *(u32 *)dout;
+ data = cpu_to_be32(data);
+ }
+ dout += 4;
+ }
+ debug("Sending SPI 0x%x\n", data);
+ reg_write(mxcs->base + MXC_CSPITXDATA, data);
+ nbytes -= 4;
+ }
/* FIFO is written, now starts the transfer setting the XCH bit */
reg_write(mxcs->base + MXC_CSPICTRL, mxcs->ctrl_reg |
@@ -290,49 +330,78 @@ static u32 spi_xchg_single(struct spi_slave *slave, u32 data, int bitlen,
reg_write(mxcs->base + MXC_CSPISTAT,
MXC_CSPICTRL_TC | MXC_CSPICTRL_RXOVF);
- data = reg_read(mxcs->base + MXC_CSPIRXDATA);
- debug("SPI Rx: 0x%x\n", data);
+ nbytes = (bitlen + 7) / 8;
- if (flags & SPI_XFER_END)
- spi_cs_deactivate(slave);
+ cnt = nbytes % 32;
+
+ if (bitlen % 32) {
+ data = reg_read(mxcs->base + MXC_CSPIRXDATA);
+ cnt = (bitlen % 32) / 8;
+ debug("SPI Rx unaligned: 0x%x\n", data);
+ if (din) {
+ for (i = 0; i < cnt; i++, data >>= 8) {
+ *din++ = data & 0xFF;
+ }
+ }
+ nbytes -= cnt;
+ }
- return data;
+ while (nbytes > 0) {
+ u32 tmp;
+ tmp = reg_read(mxcs->base + MXC_CSPIRXDATA);
+ data = cpu_to_be32(tmp);
+ debug("SPI Rx: 0x%x 0x%x\n", tmp, data);
+ cnt = min(nbytes, sizeof(data));
+ if (din) {
+ memcpy(din, &data, cnt);
+ din += cnt;
+ }
+ nbytes -= cnt;
+ }
+
+ return 0;
}
+
int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
void *din, unsigned long flags)
{
- int n_blks = (bitlen + 31) / 32;
- u32 *out_l, *in_l;
- int i;
+ int n_bytes = (bitlen + 7) / 8;
+ int n_bits;
+ int ret;
+ u32 blk_size;
+ u8 *p_outbuf = (u8 *)dout;
+ u8 *p_inbuf = (u8 *)din;
- if ((int)dout & 3 || (int)din & 3) {
- printf("Error: unaligned buffers in: %p, out: %p\n", din, dout);
- return 1;
- }
+ if (!slave)
+ return -1;
+
+ if (flags & SPI_XFER_BEGIN)
+ spi_cs_activate(slave);
+
+ while (n_bytes > 0) {
+
+ if (n_bytes < MAX_SPI_BYTES)
+ blk_size = n_bytes;
+ else
+ blk_size = MAX_SPI_BYTES;
+
+ n_bits = blk_size * 8;
- /* This driver is currently partly broken, alert the user */
- if (bitlen > 16 && (bitlen % 32)) {
- printf("Error: SPI transfer with bitlen=%d is broken.\n",
- bitlen);
- return 1;
+ ret = spi_xchg_single(slave, n_bits, p_outbuf, p_inbuf, 0);
+
+ if (ret)
+ return ret;
+ if (dout)
+ p_outbuf += blk_size;
+ if (din)
+ p_inbuf += blk_size;
+ n_bytes -= blk_size;
}
- for (i = 0, in_l = (u32 *)din, out_l = (u32 *)dout;
- i < n_blks;
- i++, in_l++, out_l++, bitlen -= 32) {
- u32 data = spi_xchg_single(slave, *out_l, bitlen, flags);
-
- /* Check if we're only transfering 8 or 16 bits */
- if (!i) {
- if (bitlen < 9)
- *(u8 *)din = data;
- else if (bitlen < 17)
- *(u16 *)din = data;
- else
- *in_l = data;
- }
+ if (flags & SPI_XFER_END) {
+ spi_cs_deactivate(slave);
}
return 0;
@@ -380,8 +449,10 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
return NULL;
mxcs = malloc(sizeof(struct mxc_spi_slave));
- if (!mxcs)
+ if (!mxcs) {
+ puts("mxc_spi: SPI Slave not allocated !\n");
return NULL;
+ }
ret = decode_cs(mxcs, cs);
if (ret < 0) {
@@ -394,6 +465,7 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
mxcs->slave.bus = bus;
mxcs->slave.cs = cs;
mxcs->base = spi_bases[bus];
+ mxcs->ss_pol = (mode & SPI_CS_HIGH) ? 1 : 0;
#ifdef CONFIG_MX51
/* Can be used for i.MX31 too ? */
@@ -413,7 +485,7 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
if (mode & SPI_CPHA)
ctrl_reg |= MXC_CSPICTRL_PHA;
- if (!(mode & SPI_CPOL))
+ if (mode & SPI_CPOL)
ctrl_reg |= MXC_CSPICTRL_POL;
if (mode & SPI_CS_HIGH)
ctrl_reg |= MXC_CSPICTRL_SSPOL;
diff --git a/include/configs/imx31_litekit.h b/include/configs/imx31_litekit.h
index 4904856..88c62d1 100644
--- a/include/configs/imx31_litekit.h
+++ b/include/configs/imx31_litekit.h
@@ -66,13 +66,13 @@
#define CONFIG_HARD_SPI 1
#define CONFIG_MXC_SPI 1
#define CONFIG_DEFAULT_SPI_BUS 1
-#define CONFIG_DEFAULT_SPI_MODE (SPI_MODE_2 | SPI_CS_HIGH)
+#define CONFIG_DEFAULT_SPI_MODE (SPI_MODE_0 | SPI_CS_HIGH)
#define CONFIG_FSL_PMIC
#define CONFIG_FSL_PMIC_BUS 1
#define CONFIG_FSL_PMIC_CS 0
#define CONFIG_FSL_PMIC_CLK 1000000
-#define CONFIG_FSL_PMIC_MODE (SPI_MODE_2 | SPI_CS_HIGH)
+#define CONFIG_FSL_PMIC_MODE (SPI_MODE_0 | SPI_CS_HIGH)
#define CONFIG_RTC_MC13783 1
diff --git a/include/configs/imx31_phycore.h b/include/configs/imx31_phycore.h
index 1dbafa0..62944a9 100644
--- a/include/configs/imx31_phycore.h
+++ b/include/configs/imx31_phycore.h
@@ -183,7 +183,7 @@
#ifdef CONFIG_IMX31_PHYCORE_EET
#define BOARD_LATE_INIT
-#define CONFIG_MX31_GPIO 1
+#define CONFIG_MXC_GPIO
#define CONFIG_HARD_SPI 1
#define CONFIG_MXC_SPI 1
diff --git a/include/configs/mx31ads.h b/include/configs/mx31ads.h
index dedecd7..57955df 100644
--- a/include/configs/mx31ads.h
+++ b/include/configs/mx31ads.h
@@ -63,13 +63,13 @@
#define CONFIG_HARD_SPI 1
#define CONFIG_MXC_SPI 1
#define CONFIG_DEFAULT_SPI_BUS 1
-#define CONFIG_DEFAULT_SPI_MODE (SPI_MODE_2 | SPI_CS_HIGH)
+#define CONFIG_DEFAULT_SPI_MODE (SPI_MODE_0 | SPI_CS_HIGH)
#define CONFIG_FSL_PMIC
#define CONFIG_FSL_PMIC_BUS 1
#define CONFIG_FSL_PMIC_CS 0
#define CONFIG_FSL_PMIC_CLK 1000000
-#define CONFIG_FSL_PMIC_MODE (SPI_MODE_2 | SPI_CS_HIGH)
+#define CONFIG_FSL_PMIC_MODE (SPI_MODE_0 | SPI_CS_HIGH)
#define CONFIG_RTC_MC13783 1
/* allow to overwrite serial and ethaddr */
diff --git a/include/configs/mx31pdk.h b/include/configs/mx31pdk.h
index 0414cc3..4b4fb1a 100644
--- a/include/configs/mx31pdk.h
+++ b/include/configs/mx31pdk.h
@@ -67,13 +67,13 @@
#define CONFIG_HARD_SPI 1
#define CONFIG_MXC_SPI 1
#define CONFIG_DEFAULT_SPI_BUS 1
-#define CONFIG_DEFAULT_SPI_MODE (SPI_MODE_2 | SPI_CS_HIGH)
+#define CONFIG_DEFAULT_SPI_MODE (SPI_MODE_0 | SPI_CS_HIGH)
#define CONFIG_FSL_PMIC
#define CONFIG_FSL_PMIC_BUS 1
#define CONFIG_FSL_PMIC_CS 2
#define CONFIG_FSL_PMIC_CLK 1000000
-#define CONFIG_FSL_PMIC_MODE (SPI_MODE_2 | SPI_CS_HIGH)
+#define CONFIG_FSL_PMIC_MODE (SPI_MODE_0 | SPI_CS_HIGH)
#define CONFIG_RTC_MC13783 1
/* allow to overwrite serial and ethaddr */
diff --git a/include/configs/mx51evk.h b/include/configs/mx51evk.h
index 86a4731..8864f3a 100644
--- a/include/configs/mx51evk.h
+++ b/include/configs/mx51evk.h
@@ -73,7 +73,7 @@
#define CONFIG_FSL_PMIC_BUS 0
#define CONFIG_FSL_PMIC_CS 0
#define CONFIG_FSL_PMIC_CLK 2500000
-#define CONFIG_FSL_PMIC_MODE (SPI_CPOL | SPI_CS_HIGH)
+#define CONFIG_FSL_PMIC_MODE (SPI_MODE_0 | SPI_CS_HIGH)
/*
* MMC Configs
diff --git a/include/configs/qong.h b/include/configs/qong.h
index 7a68b7b..cbb53dd 100644
--- a/include/configs/qong.h
+++ b/include/configs/qong.h
@@ -52,18 +52,18 @@
#define CONFIG_MXC_UART 1
#define CONFIG_SYS_MX31_UART1 1
-#define CONFIG_MX31_GPIO
+#define CONFIG_MXC_GPIO
#define CONFIG_MXC_SPI
#define CONFIG_DEFAULT_SPI_BUS 1
-#define CONFIG_DEFAULT_SPI_MODE (SPI_MODE_2 | SPI_CS_HIGH)
+#define CONFIG_DEFAULT_SPI_MODE (SPI_MODE_0 | SPI_CS_HIGH)
#define CONFIG_RTC_MC13783
#define CONFIG_FSL_PMIC
#define CONFIG_FSL_PMIC_BUS 1
#define CONFIG_FSL_PMIC_CS 0
#define CONFIG_FSL_PMIC_CLK 100000
-#define CONFIG_FSL_PMIC_MODE (SPI_MODE_2 | SPI_CS_HIGH)
+#define CONFIG_FSL_PMIC_MODE (SPI_MODE_0 | SPI_CS_HIGH)
/* FPGA */
#define CONFIG_QONG_FPGA 1
diff --git a/include/configs/vision2.h b/include/configs/vision2.h
new file mode 100644
index 0000000..44a6f8b
--- /dev/null
+++ b/include/configs/vision2.h
@@ -0,0 +1,214 @@
+/*
+ * Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de>
+ *
+ * (C) Copyright 2009 Freescale Semiconductor, Inc.
+ *
+ * Configuration settings for the MX51-3Stack Freescale board.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <asm/arch/imx-regs.h>
+
+#define CONFIG_MX51 /* in a mx51 */
+#define CONFIG_L2_OFF
+
+#define CONFIG_MX51_HCLK_FREQ 24000000
+#define CONFIG_MX51_CLK32 32768
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+
+#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
+#define CONFIG_REVISION_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+#define BOARD_LATE_INIT
+
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_SYS_MALLOC_LEN (2048 * 1024)
+
+/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_SIZE 128
+
+/*
+ * Hardware drivers
+ */
+#define CONFIG_MXC_UART
+#define CONFIG_SYS_MX51_UART3
+#define CONFIG_MXC_GPIO
+#define CONFIG_MXC_SPI
+#define CONFIG_HW_WATCHDOG
+
+ /*
+ * SPI Configs
+ * */
+#define CONFIG_FSL_SF
+#define CONFIG_CMD_SF
+
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_STMICRO
+
+/*
+ * Use gpio 4 pin 25 as chip select for SPI flash
+ * This corresponds to gpio 121
+ */
+#define CONFIG_SPI_FLASH_CS (1 | (121 << 8))
+#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
+#define CONFIG_SF_DEFAULT_SPEED 25000000
+
+#define CONFIG_ENV_SPI_CS (1 | (121 << 8))
+#define CONFIG_ENV_SPI_BUS 0
+#define CONFIG_ENV_SPI_MAX_HZ 25000000
+#define CONFIG_ENV_SPI_MODE SPI_MODE_0
+
+#define CONFIG_ENV_OFFSET (6 * 64 * 1024)
+#define CONFIG_ENV_SECT_SIZE (1 * 64 * 1024)
+#define CONFIG_ENV_SIZE (4 * 1024)
+
+#define CONFIG_FSL_ENV_IN_SF
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+
+/* PMIC Controller */
+#define CONFIG_FSL_PMIC
+#define CONFIG_FSL_PMIC_BUS 0
+#define CONFIG_FSL_PMIC_CS 0
+#define CONFIG_FSL_PMIC_CLK 2500000
+#define CONFIG_FSL_PMIC_MODE SPI_MODE_0
+#define CONFIG_RTC_MC13783
+
+/*
+ * MMC Configs
+ */
+#define CONFIG_FSL_ESDHC
+#ifdef CONFIG_FSL_ESDHC
+#define CONFIG_SYS_FSL_ESDHC_ADDR (0x70004000)
+#define CONFIG_SYS_FSL_ESDHC_NUM 1
+
+#define CONFIG_MMC
+
+#define CONFIG_CMD_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_CMD_FAT
+#define CONFIG_DOS_PARTITION
+#endif
+
+#define CONFIG_CMD_DATE
+
+/*
+ * Eth Configs
+ */
+#define CONFIG_HAS_ETH1
+#define CONFIG_NET_MULTI
+#define CONFIG_MII
+#define CONFIG_DISCOVER_PHY
+
+#define CONFIG_FEC_MXC
+#define IMX_FEC_BASE FEC_BASE_ADDR
+#define CONFIG_FEC_MXC_PHYADDR 0x1F
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_CONS_INDEX 3
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200}
+
+/***********************************************************
+ * Command definition
+ ***********************************************************/
+
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_SPI
+#undef CONFIG_CMD_IMLS
+
+#define CONFIG_BOOTDELAY 3
+
+#define CONFIG_LOADADDR 0x90800000 /* loadaddr env var */
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth0\0" \
+ "loadaddr=0x90800000\0"
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_SYS_PROMPT "Vision II U-boot > "
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
+
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
+ sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS 64 /* max number of command args */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+
+#define CONFIG_SYS_MEMTEST_START 0x90000000
+#define CONFIG_SYS_MEMTEST_END 0x10000
+
+#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
+
+#define CONFIG_SYS_HZ 1000
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "Vision II U-boot > "
+
+/*
+ * Stack sizes
+ */
+#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */
+
+/*
+ * Physical Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS 2
+#define PHYS_SDRAM_1 CSD0_BASE_ADDR
+#define PHYS_SDRAM_1_SIZE (256 * 1024 * 1024)
+#define PHYS_SDRAM_2 CSD1_BASE_ADDR
+#define PHYS_SDRAM_2_SIZE (256 * 1024 * 1024)
+#define CONFIG_SYS_SDRAM_BASE 0x90000000
+#define CONFIG_SYS_INIT_RAM_ADDR 0x1FFE8000
+
+#ifndef CONFIG_SYS_ARM_WITHOUT_RELOC
+#define CONFIG_SYS_INIT_RAM_END (64 * 1024)
+#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - \
+ CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_GBL_DATA_OFFSET)
+#undef CONFIG_SKIP_RELOCATE_UBOOT
+#else
+#define CONFIG_SKIP_RELOCATE_UBOOT
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + 0x2000)
+#endif
+
+#define CONFIG_BOARD_EARLY_INIT_F
+
+/* 166 MHz DDR RAM */
+#define CONFIG_SYS_DDR_CLKSEL 0
+#define CONFIG_SYS_CLKTL_CBCDR 0x19239100
+
+#define CONFIG_SYS_NO_FLASH
+
+#endif /* __CONFIG_H */
diff --git a/include/mc13892.h b/include/mc13892.h
index b291757..791e3ec 100644
--- a/include/mc13892.h
+++ b/include/mc13892.h
@@ -157,4 +157,7 @@
#define VSDSTBY (1 << 19)
#define VSDMODE (1 << 20)
+/* Reg Power Control 2*/
+#define WDIRESET (1 << 12)
+
#endif
diff --git a/board/freescale/mx51evk/mx51evk.h b/include/mxc_gpio.h
index 2854e71..002ba61 100644
--- a/board/freescale/mx51evk/mx51evk.h
+++ b/include/mxc_gpio.h
@@ -1,5 +1,6 @@
/*
- * (C) Copyright 2009 Freescale Semiconductor, Inc.
+ *
+ * (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -20,31 +21,32 @@
* MA 02111-1307 USA
*/
-#ifndef __BOARD_FREESCALE_MX51_EVK_H__
-#define __BOARD_FREESCALE_MX51_EVK_H__
+#ifndef __MXC_GPIO_H
+#define __MXC_GPIO_H
-#ifndef __ASSEMBLY__
-struct io_board_ctrl {
- u16 led_ctrl; /* 0x00 */
- u16 resv1[0x03];
- u16 sb_stat; /* 0x08 */
- u16 resv2[0x03];
- u16 int_stat; /* 0x10 */
- u16 resv3[0x07];
- u16 int_rest; /* 0x20 */
- u16 resv4[0x0B];
- u16 int_mask; /* 0x38 */
- u16 resv5[0x03];
- u16 id1; /* 0x40 */
- u16 resv6[0x03];
- u16 id2; /* 0x48 */
- u16 resv7[0x03];
- u16 version; /* 0x50 */
- u16 resv8[0x03];
- u16 id3; /* 0x58 */
- u16 resv9[0x03];
- u16 sw_reset; /* 0x60 */
+enum mxc_gpio_direction {
+ MXC_GPIO_DIRECTION_IN,
+ MXC_GPIO_DIRECTION_OUT,
};
+
+#ifdef CONFIG_MXC_GPIO
+extern int mxc_gpio_direction(unsigned int gpio,
+ enum mxc_gpio_direction direction);
+extern void mxc_gpio_set(unsigned int gpio, unsigned int value);
+extern int mxc_gpio_get(unsigned int gpio);
+#else
+static inline int mxc_gpio_direction(unsigned int gpio,
+ enum mxc_gpio_direction direction)
+{
+ return 1;
+}
+static inline int mxc_gpio_get(unsigned int gpio)
+{
+ return 1;
+}
+static inline void mxc_gpio_set(unsigned int gpio, unsigned int value)
+{
+}
#endif
#endif