Merge branch 'master' of git://www.denx.de/git/u-boot-mpc85xx

Conflicts:

	include/asm-ppc/fsl_lbc.h

Signed-off-by: Wolfgang Denk <wd@denx.de>

20 files changed, 432 insertions, 109 deletions

diff --git a/include/asm-ppc/fsl_law.h b/include/asm-ppc/fsl_law.h
index e955c75..227bf83 100644
--- a/include/asm-ppc/fsl_law.h
+++ b/include/asm-ppc/fsl_law.h
@@ -6,6 +6,9 @@
 #define SET_LAW_ENTRY(idx, a, sz, trgt) \
 	{ .index = idx, .addr = a, .size = sz, .trgt_id = trgt }
 
+#define SET_LAW(a, sz, trgt) \
+	{ .index = -1, .addr = a, .size = sz, .trgt_id = trgt }
+
 enum law_size {
 	LAW_SIZE_4K = 0xb,
 	LAW_SIZE_8K,
@@ -70,6 +73,8 @@ struct law_entry {
 };
 
 extern void set_law(u8 idx, phys_addr_t addr, enum law_size sz, enum law_trgt_if id);
+extern int set_next_law(phys_addr_t addr, enum law_size sz, enum law_trgt_if id);
+extern int set_last_law(phys_addr_t addr, enum law_size sz, enum law_trgt_if id);
 extern void disable_law(u8 idx);
 extern void init_laws(void);
 extern void print_laws(void);
diff --git a/include/asm-ppc/fsl_lbc.h b/include/asm-ppc/fsl_lbc.h
index 4529f02..c4af797 100644
--- a/include/asm-ppc/fsl_lbc.h
+++ b/include/asm-ppc/fsl_lbc.h
@@ -59,6 +59,10 @@
 #define BR_V				0x00000001
 #define BR_V_SHIFT			0
 
+#define UPMA			0
+#define UPMB			1
+#define UPMC			2
+
 #if defined(CONFIG_MPC834X)
 #define BR_RES				~(BR_BA | BR_PS | BR_DECC | BR_WP | BR_MSEL | BR_V)
 #else
@@ -161,11 +165,6 @@
 #define OR_UPM_EAD			0x00000001
 #define OR_UPM_EAD_SHIFT		0
 
-#define MxMR_OP_NORM			0x00000000 /* Normal Operation */
-#define MxMR_DSx_2_CYCL 		0x00400000 /* 2 cycle Disable Period */
-#define MxMR_OP_WARR			0x10000000 /* Write to Array */
-#define MxMR_BSEL			0x80000000 /* Bus Select */
-
 #define OR_SDRAM_AM			0xFFFF8000
 #define OR_SDRAM_AM_SHIFT		15
 #define OR_SDRAM_XAM			0x00006000
@@ -198,6 +197,44 @@
 #define OR_AM_2GB			0x80000000
 #define OR_AM_4GB			0x00000000
 
+/* MxMR - UPM Machine A/B/C Mode Registers
+ */
+#define MxMR_MAD_MSK		0x0000003f /* Machine Address Mask	   */
+#define MxMR_TLFx_MSK		0x000003c0 /* Refresh Loop Field Mask	   */
+#define MxMR_WLFx_MSK		0x00003c00 /* Write Loop Field Mask	   */
+#define MxMR_WLFx_1X		0x00000400 /*	executed 1 time		   */
+#define MxMR_WLFx_2X		0x00000800 /*	executed 2 times	   */
+#define MxMR_WLFx_3X		0x00000c00 /*	executed 3 times	   */
+#define MxMR_WLFx_4X		0x00001000 /*	executed 4 times	   */
+#define MxMR_WLFx_5X		0x00001400 /*	executed 5 times	   */
+#define MxMR_WLFx_6X		0x00001800 /*	executed 6 times	   */
+#define MxMR_WLFx_7X		0x00001c00 /*	executed 7 times	   */
+#define MxMR_WLFx_8X		0x00002000 /*	executed 8 times	   */
+#define MxMR_WLFx_9X		0x00002400 /*	executed 9 times	   */
+#define MxMR_WLFx_10X		0x00002800 /*	executed 10 times	   */
+#define MxMR_WLFx_11X		0x00002c00 /*	executed 11 times	   */
+#define MxMR_WLFx_12X		0x00003000 /*	executed 12 times	   */
+#define MxMR_WLFx_13X		0x00003400 /*	executed 13 times	   */
+#define MxMR_WLFx_14X		0x00003800 /*	executed 14 times	   */
+#define MxMR_WLFx_15X		0x00003c00 /*	executed 15 times	   */
+#define MxMR_WLFx_16X		0x00000000 /*	executed 16 times	   */
+#define MxMR_RLFx_MSK		0x0003c000 /* Read Loop Field Mask	   */
+#define MxMR_GPL_x4DIS		0x00040000 /* GPL_A4 Ouput Line Disable	   */
+#define MxMR_G0CLx_MSK		0x00380000 /* General Line 0 Control Mask  */
+#define MxMR_DSx_1_CYCL		0x00000000 /* 1 cycle Disable Period	   */
+#define MxMR_DSx_2_CYCL		0x00400000 /* 2 cycle Disable Period	   */
+#define MxMR_DSx_3_CYCL		0x00800000 /* 3 cycle Disable Period	   */
+#define MxMR_DSx_4_CYCL		0x00c00000 /* 4 cycle Disable Period	   */
+#define MxMR_DSx_MSK		0x00c00000 /* Disable Timer Period Mask	   */
+#define MxMR_AMx_MSK		0x07000000 /* Addess Multiplex Size Mask   */
+#define MxMR_OP_NORM		0x00000000 /* Normal Operation		   */
+#define MxMR_OP_WARR		0x10000000 /* Write to Array		   */
+#define MxMR_OP_RARR		0x20000000 /* Read from Array		   */
+#define MxMR_OP_RUNP		0x30000000 /* Run Pattern		   */
+#define MxMR_OP_MSK		0x30000000 /* Command Opcode Mask	   */
+#define MxMR_RFEN		0x40000000 /* Refresh Enable		   */
+#define MxMR_BSEL		0x80000000 /* Bus Select		   */
+
 #define LBLAWAR_EN			0x80000000
 #define LBLAWAR_4KB			0x0000000B
 #define LBLAWAR_8KB			0x0000000C
diff --git a/include/asm-ppc/global_data.h b/include/asm-ppc/global_data.h
index ea70266..8cf7b6f 100644
--- a/include/asm-ppc/global_data.h
+++ b/include/asm-ppc/global_data.h
@@ -96,6 +96,9 @@ typedef	struct	global_data {
 	uint mp_alloc_base;
 	uint mp_alloc_top;
 #endif /* CONFIG_QE */
+#if defined(CONFIG_FSL_LAW)
+	u32 used_laws;
+#endif
 #if defined(CONFIG_MPC5xxx)
 	unsigned long	ipb_clk;
 	unsigned long	pci_clk;
diff --git a/include/asm-ppc/io.h b/include/asm-ppc/io.h
index 7cc28bf..c349681 100644
--- a/include/asm-ppc/io.h
+++ b/include/asm-ppc/io.h
@@ -238,6 +238,42 @@ extern inline void out_be32(volatile unsigned __iomem *addr, int val)
 	__asm__ __volatile__("sync; stw%U0%X0 %1,%0" : "=m" (*addr) : "r" (val));
 }
 
+/* Clear and set bits in one shot. These macros can be used to clear and
+ * set multiple bits in a register using a single call. These macros can
+ * also be used to set a multiple-bit bit pattern using a mask, by
+ * specifying the mask in the 'clear' parameter and the new bit pattern
+ * in the 'set' parameter.
+ */
+
+#define clrbits(type, addr, clear) \
+	out_##type((addr), in_##type(addr) & ~(clear))
+
+#define setbits(type, addr, set) \
+	out_##type((addr), in_##type(addr) | (set))
+
+#define clrsetbits(type, addr, clear, set) \
+	out_##type((addr), (in_##type(addr) & ~(clear)) | (set))
+
+#define clrbits_be32(addr, clear) clrbits(be32, addr, clear)
+#define setbits_be32(addr, set) setbits(be32, addr, set)
+#define clrsetbits_be32(addr, clear, set) clrsetbits(be32, addr, clear, set)
+
+#define clrbits_le32(addr, clear) clrbits(le32, addr, clear)
+#define setbits_le32(addr, set) setbits(le32, addr, set)
+#define clrsetbits_le32(addr, clear, set) clrsetbits(le32, addr, clear, set)
+
+#define clrbits_be16(addr, clear) clrbits(be16, addr, clear)
+#define setbits_be16(addr, set) setbits(be16, addr, set)
+#define clrsetbits_be16(addr, clear, set) clrsetbits(be16, addr, clear, set)
+
+#define clrbits_le16(addr, clear) clrbits(le16, addr, clear)
+#define setbits_le16(addr, set) setbits(le16, addr, set)
+#define clrsetbits_le16(addr, clear, set) clrsetbits(le16, addr, clear, set)
+
+#define clrbits_8(addr, clear) clrbits(8, addr, clear)
+#define setbits_8(addr, set) setbits(8, addr, set)
+#define clrsetbits_8(addr, clear, set) clrsetbits(8, addr, clear, set)
+
 /*
  * Given a physical address and a length, return a virtual address
  * that can be used to access the memory range with the caching
diff --git a/include/asm-ppc/processor.h b/include/asm-ppc/processor.h
index 8bdfb9d..61a0d05 100644
--- a/include/asm-ppc/processor.h
+++ b/include/asm-ppc/processor.h
@@ -960,6 +960,17 @@ n:
 #define SR15	15
 
 #ifndef __ASSEMBLY__
+
+struct cpu_type {
+	char name[15];
+	u32 soc_ver;
+};
+
+struct cpu_type *identify_cpu(uint ver);
+
+#define CPU_TYPE_ENTRY(n, v) \
+	{ .name = #n, .soc_ver = SVR_##v, }
+
 #ifndef CONFIG_MACH_SPECIFIC
 extern int _machine;
 extern int have_of;
diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h
index 5719759..d1d3cc3 100644
--- a/include/configs/MPC8540ADS.h
+++ b/include/configs/MPC8540ADS.h
@@ -87,9 +87,6 @@
 #define CONFIG_BTB			/* toggle branch predition */
 #define CONFIG_ADDR_STREAMING		/* toggle addr streaming */
 
-#define CONFIG_BOARD_EARLY_INIT_F	1	/* Call board_pre_init */
-
-#undef	CFG_DRAM_TEST			/* memory test, takes time */
 #define CFG_MEMTEST_START	0x00200000	/* memtest region */
 #define CFG_MEMTEST_END		0x00400000
 
diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h
index 5b3ea05..a64565d 100644
--- a/include/configs/MPC8541CDS.h
+++ b/include/configs/MPC8541CDS.h
@@ -73,9 +73,6 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_BTB			    /* toggle branch predition */
 #define CONFIG_ADDR_STREAMING		    /* toggle addr streaming   */
 
-#define CONFIG_BOARD_EARLY_INIT_F	1	/* Call board_pre_init */
-
-#undef	CFG_DRAM_TEST			/* memory test, takes time */
 #define CFG_MEMTEST_START	0x00200000	/* memtest works on */
 #define CFG_MEMTEST_END		0x00400000
 
diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h
index ffe9e00..669f4d7c 100644
--- a/include/configs/MPC8544DS.h
+++ b/include/configs/MPC8544DS.h
@@ -77,19 +77,14 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_L2_CACHE			/* toggle L2 cache */
 #define CONFIG_BTB			/* toggle branch predition */
 #define CONFIG_ADDR_STREAMING		/* toggle addr streaming */
-#define CONFIG_CLEAR_LAW0		/* Clear LAW0 in cpu_init_r */
 
 /*
  * Only possible on E500 Version 2 or newer cores.
  */
 #define CONFIG_ENABLE_36BIT_PHYS	1
 
-#define CONFIG_BOARD_EARLY_INIT_F	1	/* Call board_pre_init */
-
-#undef	CFG_DRAM_TEST			/* memory test, takes time */
 #define CFG_MEMTEST_START	0x00200000	/* memtest works on */
 #define CFG_MEMTEST_END		0x00400000
-#define CFG_ALT_MEMTEST
 #define CONFIG_PANIC_HANG	/* do not reset board on panic */
 
 /*
@@ -171,6 +166,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #undef	CFG_FLASH_CHECKSUM
 #define CFG_FLASH_ERASE_TOUT	60000		/* Flash Erase Timeout (ms) */
 #define CFG_FLASH_WRITE_TOUT	500		/* Flash Write Timeout (ms) */
+#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
 
 #define CFG_MONITOR_BASE	TEXT_BASE	/* start of monitor */
 
diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h
index fc8ad88..acf6f0d 100644
--- a/include/configs/MPC8548CDS.h
+++ b/include/configs/MPC8548CDS.h
@@ -87,9 +87,6 @@ extern unsigned long get_clock_freq(void);
  */
 #define CONFIG_ENABLE_36BIT_PHYS	1
 
-#define CONFIG_BOARD_EARLY_INIT_F	1	/* Call board_pre_init */
-
-#undef	CFG_DRAM_TEST			/* memory test, takes time */
 #define CFG_MEMTEST_START	0x00200000	/* memtest works on */
 #define CFG_MEMTEST_END		0x00400000
 
diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h
index e838345..1948c0d 100644
--- a/include/configs/MPC8555CDS.h
+++ b/include/configs/MPC8555CDS.h
@@ -73,9 +73,6 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_BTB			    /* toggle branch predition */
 #define CONFIG_ADDR_STREAMING		    /* toggle addr streaming   */
 
-#define CONFIG_BOARD_EARLY_INIT_F	1	/* Call board_pre_init */
-
-#undef	CFG_DRAM_TEST			/* memory test, takes time */
 #define CFG_MEMTEST_START	0x00200000	/* memtest works on */
 #define CFG_MEMTEST_END		0x00400000
 
diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h
index 9c95cc6..edf8525 100644
--- a/include/configs/MPC8560ADS.h
+++ b/include/configs/MPC8560ADS.h
@@ -40,6 +40,7 @@
 #define CONFIG_MPC85xx		1	/* MPC8540/MPC8560 */
 #define CONFIG_CPM2		1	/* has CPM2 */
 #define CONFIG_MPC8560ADS	1	/* MPC8560ADS board specific */
+#define CONFIG_MPC8560		1
 
 #define CONFIG_PCI
 #define CONFIG_TSEC_ENET		/* tsec ethernet support */
@@ -80,11 +81,8 @@
 #define CONFIG_BTB			/* toggle branch predition */
 #define CONFIG_ADDR_STREAMING		/* toggle addr streaming */
 
-#define CONFIG_BOARD_EARLY_INIT_F	1	/* Call board_pre_init */
-
 #define CFG_INIT_DBCR DBCR_IDM		/* Enable Debug Exceptions */
 
-#undef	CFG_DRAM_TEST			/* memory test, takes time */
 #define CFG_MEMTEST_START	0x00200000	/* memtest region */
 #define CFG_MEMTEST_END		0x00400000
 
diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h
index a7c69d2..9e6bb44 100644
--- a/include/configs/MPC8568MDS.h
+++ b/include/configs/MPC8568MDS.h
@@ -80,7 +80,6 @@ extern unsigned long get_clock_freq(void);
 
 #define CONFIG_BOARD_EARLY_INIT_F	1	/* Call board_pre_init */
 
-#undef	CFG_DRAM_TEST			/* memory test, takes time */
 #define CFG_MEMTEST_START	0x00200000	/* memtest works on */
 #define CFG_MEMTEST_END		0x00400000
 
diff --git a/include/configs/SBC8540.h b/include/configs/SBC8540.h
index ff64378..8a53fdd 100644
--- a/include/configs/SBC8540.h
+++ b/include/configs/SBC8540.h
@@ -49,6 +49,7 @@
 #define CONFIG_CPM2		1	/* has CPM2 */
 
 #define CONFIG_SBC8540		1	/* configuration for SBC8560 board */
+#define CONFIG_MPC8540		1
 
 #define CONFIG_MPC8560ADS	1	/* MPC8560ADS board specific (supplement)	*/
 
diff --git a/include/configs/TQM85xx.h b/include/configs/TQM85xx.h
index fca5f74..d18f234 100644
--- a/include/configs/TQM85xx.h
+++ b/include/configs/TQM85xx.h
@@ -1,4 +1,7 @@
 /*
+ * (C) Copyright 2007
+ * Thomas Waehner, TQ-System GmbH, thomas.waehner@tqs.de.
+ *
  * (C) Copyright 2005
  * Stefan Roese, DENX Software Engineering, sr@denx.de.
  *
@@ -27,7 +30,7 @@
  */
 
 /*
- * TQM85xx (8560/40/55/41) board configuration file
+ * TQM85xx (8560/40/55/41/48) board configuration file
  */
 
 #ifndef __CONFIG_H
@@ -39,25 +42,53 @@
 #define CONFIG_MPC85xx		1	/* MPC8540/60/55/41		*/
 
 #define CONFIG_PCI
+#define CONFIG_FSL_PCI_INIT	1	/* Use common FSL init code	*/
+#define CONFIG_PCIX_CHECK		/* PCIX olny works at 66 MHz	*/
+#ifdef CONFIG_TQM8548
+#define CONFIG_PCI1
+#define CONFIG_PCIE1
+#define CONFIG_FSL_PCIE_RESET	1	/* need PCIe reset errata	*/
+#endif
+
 #define CONFIG_TSEC_ENET		/* tsec ethernet support	*/
 
 #define CONFIG_MISC_INIT_R	1	/* Call misc_init_r		*/
 
+ /*
+ * Configuration for big NOR Flashes
+ *
+ * Define CONFIG_TQM_BIGFLASH for boards with more than 128 MiB NOR Flash.
+ * Please be aware, that this changes the whole memory map (new CCSRBAR
+ * address, etc). You have to use an adapted Linux kernel or FDT blob
+ * if this option is set.
+ */
+#undef CONFIG_TQM_BIGFLASH
+
+/*
+ * NAND flash support (disabled by default)
+ *
+ * Warning: NAND support will likely increase the U-Boot image size
+ * to more than 256 KB. Please adjust TEXT_BASE if necessary.
+ */
+#undef CONFIG_NAND
+
 /*
- * Only MPC8540 doesn't have CPM module
+ * MPC8540 and MPC8548 don't have CPM module
  */
-#ifndef CONFIG_MPC8540
+#if !defined(CONFIG_MPC8540) && !defined(CONFIG_MPC8548)
 #define CONFIG_CPM2		1	/* has CPM2			*/
 #endif
 
-#define CONFIG_FSL_LAW		1	/* Use common FSL init code */
+#define CONFIG_FSL_LAW		1	/* Use common FSL init code	*/
+
+#undef	CONFIG_CAN_DRIVER		/* CAN Driver support		*/
 
 /*
  * sysclk for MPC85xx
  *
  * Two valid values are:
- *    33000000
- *    66000000
+ *    33333333
+ *    66666666
  *
  * Most PCI cards are still 33Mhz, so in the presence of PCI, 33MHz
  * is likely the desired value here, so that is now the default.
@@ -88,10 +119,18 @@
  * actual resources get mapped (not physical addresses)
  */
 #define CFG_CCSRBAR_DEFAULT	0xFF700000	/* CCSRBAR Default	*/
+#ifdef CONFIG_TQM_BIGFLASH
+#define CFG_CCSRBAR	 	0xA0000000	/* relocated CCSRBAR	*/
+#else /* !CONFIG_TQM_BIGFLASH */
 #define CFG_CCSRBAR		0xE0000000	/* relocated CCSRBAR	*/
+#endif /* CONFIG_TQM_BIGFLASH */
 #define CFG_CCSRBAR_PHYS	CFG_CCSRBAR	/* physical addr of CCSRBAR */
 #define CFG_IMMR		CFG_CCSRBAR	/* PQII uses CFG_IMMR	*/
 
+#define CFG_PCI1_ADDR		(CFG_CCSRBAR + 0x8000)
+#define CFG_PCI2_ADDR		(CFG_CCSRBAR + 0x9000)
+#define CFG_PCIE1_ADDR		(CFG_CCSRBAR + 0xa000)
+
 /*
  * DDR Setup
  */
@@ -102,65 +141,116 @@
 /* TQM8540 & 8560 need DLL-override */
 #define CONFIG_DDR_DLL				/* DLL fix needed	*/
 #define CONFIG_DDR_DEFAULT_CL	25		/* CAS latency 2,5	*/
-#endif /* defined(CONFIG_TQM8540) || defined(CONFIG_TQM8560) */
+#endif /* CONFIG_TQM8540 || CONFIG_TQM8560 */
 
-#if defined(CONFIG_TQM8541) || defined(CONFIG_TQM8555)
+#if defined(CONFIG_TQM8541) || defined(CONFIG_TQM8555) || \
+    defined(CONFIG_TQM8548)
 #define CONFIG_DDR_DEFAULT_CL	30		/* CAS latency 3	*/
-#endif /* defined(CONFIG_TQM8541) || defined(CONFIG_TQM8555) */
+#endif /* CONFIG_TQM8541 || CONFIG_TQM8555 || CONFIG_TQM8548 */
+
+/*
+ * Old TQM85xx boards have 'M' type Spansion Flashes from the S29GLxxxM
+ * series while new boards have 'N' type Flashes from the S29GLxxxN
+ * series, which have bigger sectors: 2 x 128 instead of 2 x 64 KB.
+ */
+#ifdef CONFIG_TQM8548
+#define CONFIG_TQM_FLASH_N_TYPE
+#endif /* CONFIG_TQM8548 */
 
 /*
  * Flash on the Local Bus
  */
+#ifdef CONFIG_TQM_BIGFLASH
+#define CFG_FLASH0		0xE0000000
+#define CFG_FLASH1		0xC0000000
+#else /* !CONFIG_TQM_BIGFLASH */
 #define CFG_FLASH0		0xFC000000
 #define CFG_FLASH1		0xF8000000
+#endif /* CONFIG_TQM_BIGFLASH */
 #define CFG_FLASH_BANKS_LIST	{ CFG_FLASH1, CFG_FLASH0 }
 
 #define CFG_LBC_FLASH_BASE	CFG_FLASH1	/* Localbus flash start	*/
-#define CFG_FLASH_BASE		CFG_LBC_FLASH_BASE /* start of FLASH	*/
+#define CFG_FLASH_BASE		CFG_LBC_FLASH_BASE  /* start of FLASH	*/
 
+/* Default ORx timings are for <= 41.7 MHz Local Bus Clock.
+ *
+ * Note: According to timing specifications external addr latch delay
+ * (EAD, bit #0) must be set if Local Bus Clock is > 83 MHz.
+ *
+ * For other Local Bus Clocks see following table:
+ *
+ * Clock/MHz   CFG_ORx_PRELIM
+ * 166         0x.....CA5
+ * 133         0x.....C85
+ * 100         0x.....C65
+ *  83         0x.....FA2
+ *  66         0x.....C82
+ *  50         0x.....C60
+ *  42         0x.....040
+ *  33         0x.....030
+ *  25         0x.....020
+ *
+ */
+#ifdef CONFIG_TQM_BIGFLASH
+#define CFG_BR0_PRELIM		0xE0001801	/* port size 32bit	*/
+#define CFG_OR0_PRELIM		0xE0000040	/* 512MB Flash		*/
+#define CFG_BR1_PRELIM		0xC0001801	/* port size 32bit	*/
+#define CFG_OR1_PRELIM		0xE0000040	/* 512MB Flash		*/
+#else /* !CONFIG_TQM_BIGFLASH */
 #define CFG_BR0_PRELIM		0xfc001801	/* port size 32bit	*/
 #define CFG_OR0_PRELIM		0xfc000040	/* 64MB Flash		*/
 #define CFG_BR1_PRELIM		0xf8001801	/* port size 32bit	*/
 #define CFG_OR1_PRELIM		0xfc000040	/* 64MB Flash		*/
+#endif /* CONFIG_TQM_BIGFLASH */
 
-#define CFG_FLASH_CFI				/* flash is CFI compat.	*/
-#define CFG_FLASH_CFI_DRIVER			/* Use common CFI driver*/
+#define CFG_FLASH_CFI			/* flash is CFI compat.		*/
+#define CFG_FLASH_CFI_DRIVER		/* Use common CFI driver	*/
 #define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector	*/
 #define CFG_FLASH_QUIET_TEST	1	/* don't warn upon unknown flash*/
+#define CFG_FLASH_USE_BUFFER_WRITE	1 /* speed up output to Flash	*/
 
-#define CFG_MAX_FLASH_BANKS	2		/* number of banks	*/
-#define CFG_MAX_FLASH_SECT	512		/* sectors per device	*/
+#define CFG_MAX_FLASH_BANKS	2	/* number of banks		*/
+#define CFG_MAX_FLASH_SECT	512	/* sectors per device		*/
 #undef	CFG_FLASH_CHECKSUM
 #define CFG_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms)	*/
 #define CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms)	*/
 
 #define CFG_MONITOR_BASE	TEXT_BASE	/* start of monitor	*/
 
-#define CFG_LBC_LCRR		0x00030008    /* LB clock ratio reg	*/
-#define CFG_LBC_LBCR		0x00000000    /* LB config reg		*/
-#define CFG_LBC_LSRT		0x20000000    /* LB sdram refresh timer	*/
-#define CFG_LBC_MRTPR		0x20000000    /* LB refresh timer presc.*/
+/*
+ * Note: when changing the Local Bus clock divider you have to
+ * change the timing values in CFG_ORx_PRELIM.
+ *
+ * LCRR[00:03] CLKDIV: System (CCB) clock divider. Valid values are 2, 4, 8.
+ * LCRR[16:17] EADC  : External address delay cycles. It should be set to 2
+ *                     for Local Bus Clock > 83.3 MHz.
+ */
+#define CFG_LBC_LCRR		0x00030008	/* LB clock ratio reg	*/
+#define CFG_LBC_LBCR		0x00000000	/* LB config reg	*/
+#define CFG_LBC_LSRT		0x20000000	/* LB sdram refresh timer */
+#define CFG_LBC_MRTPR		0x20000000	/* LB refresh timer presc.*/
 
 #define CONFIG_L1_INIT_RAM
 #define CFG_INIT_RAM_LOCK	1
-#define CFG_INIT_RAM_ADDR	0xe4010000	/* Initial RAM address	*/
+#define CFG_INIT_RAM_ADDR	(CFG_CCSRBAR \
+				 + 0x04010000)	/* Initial RAM address	*/
 #define CFG_INIT_RAM_END	0x4000		/* End used area in RAM	*/
 
-#define CFG_GBL_DATA_SIZE	128		/* num bytes initial data*/
+#define CFG_GBL_DATA_SIZE	128	/* num bytes initial data	*/
 #define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
 #define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
 
-#define CFG_MONITOR_LEN		(256 * 1024)	/* Reserve 256kB for Mon*/
-#define CFG_MALLOC_LEN		(128 * 1024)	/* Reserved for malloc	*/
+#define CFG_MONITOR_LEN		(~TEXT_BASE + 1)/* Reserved for Monitor	*/
+#define CFG_MALLOC_LEN		(384 * 1024)	/* Reserved for malloc	*/
 
 /* Serial Port */
 #if defined(CONFIG_TQM8560)
 
-#define CONFIG_CONS_ON_SCC      /* define if console on SCC */
-#undef  CONFIG_CONS_NONE        /* define if console on something else */
-#define CONFIG_CONS_INDEX       1  /* which serial channel for console */
+#define CONFIG_CONS_ON_SCC	/* define if console on SCC		*/
+#undef	CONFIG_CONS_NONE	/* define if console on something else	*/
+#define CONFIG_CONS_INDEX	1 /* which serial channel for console	*/
 
-#else	/* ! TQM8560 */
+#else /* !CONFIG_TQM8560 */
 
 #define CONFIG_CONS_INDEX     1
 #undef	CONFIG_SERIAL_SOFTWARE_FIFO
@@ -173,20 +263,18 @@
 #define CFG_NS16550_COM2	(CFG_CCSRBAR+0x4600)
 
 /* PS/2 Keyboard */
-#if !defined(CONFIG_TQM8560)
 #define CONFIG_PS2KBD			/* AT-PS/2 Keyboard		*/
 #define CONFIG_PS2MULT			/* .. on PS/2 Multiplexer	*/
 #define CONFIG_PS2SERIAL	2	/* .. on DUART2			*/
 #define CONFIG_PS2MULT_DELAY	(CFG_HZ/2)	/* Initial delay	*/
 #define CONFIG_BOARD_EARLY_INIT_R	1
-#endif /* !CONFIG_TQM8560 */
 
 #endif /* CONFIG_TQM8560 */
 
-#define CONFIG_BAUDRATE         115200
+#define CONFIG_BAUDRATE		115200
 
-#define CFG_BAUDRATE_TABLE  \
-	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
+#define CFG_BAUDRATE_TABLE	\
+	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
 
 #define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
 #define CFG_HUSH_PARSER		1	/* Use the HUSH parser		*/
@@ -194,11 +282,25 @@
 #define	CFG_PROMPT_HUSH_PS2	"> "
 #endif
 
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT		1
+#define CONFIG_OF_BOARD_SETUP		1
+#define CONFIG_OF_STDOUT_VIA_ALIAS	1
+
+/* CAN */
+#define CFG_CAN_BASE		(CFG_CCSRBAR \
+				 + 0x03000000)	/* CAN base address     */
+#ifdef CONFIG_CAN_DRIVER
+#define CFG_CAN_OR_AM		0xFFFF8000	/* 32 KiB address mask  */
+#define CFG_OR2_CAN		(CFG_CAN_OR_AM | OR_UPM_BI)
+#define CFG_BR2_CAN		((CFG_CAN_BASE & BR_BA) | \
+				 BR_PS_8 | BR_MS_UPMC | BR_V)
+#endif /* CONFIG_CAN_DRIVER */
 
 /*
  * I2C
  */
-#define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
+#define CONFIG_FSL_I2C			/* Use FSL common I2C driver	*/
 #define CONFIG_HARD_I2C			/* I2C with hardware support	*/
 #undef	CONFIG_SOFT_I2C			/* I2C bit-banged		*/
 #define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
@@ -219,7 +321,7 @@
 #define CFG_EEPROM_PAGE_WRITE_BITS	5	/* =32 Bytes per write	*/
 #define CFG_EEPROM_PAGE_WRITE_ENABLE
 #define CFG_EEPROM_PAGE_WRITE_DELAY_MS	20
-#define CFG_I2C_MULTI_EEPROMS		1       /* more than one eeprom */
+#define CFG_I2C_MULTI_EEPROMS		1	/* more than one eeprom	*/
 
 /* I2C SYSMON (LM75) */
 #define CONFIG_DTT_LM75		1		/* ON Semi's LM75	*/
@@ -228,10 +330,64 @@
 #define CFG_DTT_LOW_TEMP	-30
 #define CFG_DTT_HYSTERESIS	3
 
+#ifndef CONFIG_PCIE1
 /* RapidIO MMU */
+#ifdef CONFIG_TQM_BIGFLASH
+#define CFG_RIO_MEM_BASE	0xb0000000	/* base address		*/
+#define CFG_RIO_MEM_SIZE	0x10000000	/* 256M			*/
+#else /* !CONFIG_TQM_BIGFLASH */
 #define CFG_RIO_MEM_BASE	0xc0000000	/* base address		*/
+#define CFG_RIO_MEM_SIZE	0x20000000	/* 512M			*/
+#endif /* CONFIG_TQM_BIGFLASH */
 #define CFG_RIO_MEM_PHYS	CFG_RIO_MEM_BASE
-#define CFG_RIO_MEM_SIZE	0x20000000	/* 128M			*/
+#endif /* CONFIG_PCIE1 */
+
+/* NAND FLASH */
+#ifdef CONFIG_NAND
+
+#undef CFG_NAND_LEGACY
+
+#define CONFIG_NAND_FSL_UPM	1
+
+#define	CONFIG_MTD_NAND_ECC_JFFS2	1	/* use JFFS2 ECC	*/
+
+/* address distance between chip selects */
+#define	CFG_NAND_SELECT_DEVICE	1
+#define	CFG_NAND_CS_DIST	0x200
+
+#define CFG_NAND_SIZE		0x8000
+#define CFG_NAND0_BASE		(CFG_CCSRBAR + 0x03010000)
+#define CFG_NAND1_BASE		(CFG_NAND0_BASE + CFG_NAND_CS_DIST)
+#define CFG_NAND2_BASE		(CFG_NAND1_BASE + CFG_NAND_CS_DIST)
+#define CFG_NAND3_BASE		(CFG_NAND2_BASE + CFG_NAND_CS_DIST)
+
+#define CFG_MAX_NAND_DEVICE     2	/* Max number of NAND devices	*/
+#define NAND_MAX_CHIPS		1
+
+#if (CFG_MAX_NAND_DEVICE == 1)
+#define CFG_NAND_BASE_LIST { CFG_NAND0_BASE }
+#elif (CFG_MAX_NAND_DEVICE == 2)
+#define	CFG_NAND_QUIET_TEST	1
+#define CFG_NAND_BASE_LIST { CFG_NAND0_BASE, \
+			     CFG_NAND1_BASE, \
+}
+#elif (CFG_MAX_NAND_DEVICE == 4)
+#define	CFG_NAND_QUIET_TEST	1
+#define CFG_NAND_BASE_LIST { CFG_NAND0_BASE, \
+			     CFG_NAND1_BASE, \
+			     CFG_NAND2_BASE, \
+			     CFG_NAND3_BASE, \
+}
+#endif
+
+/* CS3 for NAND Flash */
+#define CFG_BR3_PRELIM		((CFG_NAND0_BASE & BR_BA) | BR_PS_8 | \
+				 BR_MS_UPMB | BR_V)
+#define CFG_OR3_PRELIM		(P2SZ_TO_AM(CFG_NAND_SIZE) | OR_UPM_BI)
+
+#define NAND_BIG_DELAY_US       25	/* max tR for Samsung devices	*/
+
+#endif /* CONFIG_NAND */
 
 /*
  * General PCI
@@ -240,9 +396,33 @@
 #define CFG_PCI1_MEM_BASE	0x80000000
 #define CFG_PCI1_MEM_PHYS	CFG_PCI1_MEM_BASE
 #define CFG_PCI1_MEM_SIZE	0x20000000	/* 512M			*/
-#define CFG_PCI1_IO_BASE	0xe2000000
+#define CFG_PCI1_IO_BASE	(CFG_CCSRBAR + 0x02000000)
 #define CFG_PCI1_IO_PHYS	CFG_PCI1_IO_BASE
-#define CFG_PCI1_IO_SIZE	0x1000000	/* 16M			*/
+#define CFG_PCI1_IO_SIZE	0x1000000	/*  16M			*/
+
+/* PCI view of System Memory */
+#define CFG_PCI_MEMORY_BUS	0x00000000
+#define CFG_PCI_MEMORY_PHYS	0x00000000
+#define CFG_PCI_MEMORY_SIZE	0x80000000
+
+#ifdef CONFIG_PCIE1
+/*
+ * General PCI express
+ * Addresses are mapped 1-1.
+ */
+#ifdef CONFIG_TQM_BIGFLASH
+#define CFG_PCIE1_MEM_BASE	0xb0000000
+#define CFG_PCIE1_MEM_SIZE	0x10000000      /* 512M                 */
+#define CFG_PCIE1_IO_BASE	0xaf000000
+#else /* !CONFIG_TQM_BIGFLASH */
+#define CFG_PCIE1_MEM_BASE	0xc0000000
+#define CFG_PCIE1_MEM_SIZE	0x20000000      /* 512M                 */
+#define CFG_PCIE1_IO_BASE	0xef000000
+#endif /* CONFIG_TQM_BIGFLASH */
+#define CFG_PCIE1_MEM_PHYS	CFG_PCIE1_MEM_BASE
+#define CFG_PCIE1_IO_PHYS	CFG_PCIE1_IO_BASE
+#define CFG_PCIE1_IO_SIZE	0x1000000       /* 16M                  */
+#endif /* CONFIG_PCIE1 */
 
 #if defined(CONFIG_PCI)
 
@@ -254,8 +434,7 @@
 #undef CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup	*/
 #define CFG_PCI_SUBSYS_VENDORID 0x1057	/* Motorola			*/
 
-#endif	/* CONFIG_PCI */
-
+#endif /* CONFIG_PCI */
 
 #define CONFIG_NET_MULTI	1
 
@@ -277,6 +456,27 @@
 #define CONFIG_HAS_ETH1
 #define CONFIG_HAS_ETH2
 
+#ifdef CONFIG_TQM8548
+/*
+ * TQM8548 has 4 ethernet ports. 4 ETSEC's.
+ *
+ * On the STK85xx Starterkit the ETSEC3/4 ports are on an
+ * additional adapter (AIO) between module and Starterkit.
+ */
+#define CONFIG_TSEC3	1
+#define CONFIG_TSEC3_NAME	"TSEC2"
+#define CONFIG_TSEC4	1
+#define CONFIG_TSEC4_NAME	"TSEC3"
+#define TSEC3_PHY_ADDR		4
+#define TSEC4_PHY_ADDR		5
+#define TSEC3_PHYIDX		0
+#define TSEC4_PHYIDX		0
+#define TSEC3_FLAGS		(TSEC_GIGABIT | TSEC_REDUCED)
+#define TSEC4_FLAGS		(TSEC_GIGABIT | TSEC_REDUCED)
+#define CONFIG_HAS_ETH3
+#define CONFIG_HAS_ETH4
+#endif	/* CONFIG_TQM8548 */
+
 /* Options are TSEC[0-1], FEC */
 #define CONFIG_ETHPRIME		"TSEC0"
 
@@ -305,7 +505,7 @@
  * FCC2: a - c (X50.2 - 1)
  */
 #define CONFIG_ETHER_ON_FCC
-#define	CONFIG_ETHER_INDEX    1		/* FCC channel for ethernet	*/
+#define	CONFIG_ETHER_INDEX    1	/* FCC channel for ethernet	*/
 #endif
 
 #if defined(CONFIG_TQM8560)
@@ -321,12 +521,13 @@
  * FCC3: a - d (X50.2 - 3)
  */
 #define CONFIG_ETHER_ON_FCC
-#define	CONFIG_ETHER_INDEX    3		/* FCC channel for ethernet	*/
+#define	CONFIG_ETHER_INDEX    3	/* FCC channel for ethernet	*/
 #endif
 
 #if defined(CONFIG_ETHER_ON_FCC) && (CONFIG_ETHER_INDEX == 1)
 #define CONFIG_ETHER_ON_FCC1
-#define CFG_CMXFCR_MASK1	(CMXFCR_FC1 | CMXFCR_RF1CS_MSK | CMXFCR_TF1CS_MSK)
+#define CFG_CMXFCR_MASK1	(CMXFCR_FC1 | CMXFCR_RF1CS_MSK | \
+				 CMXFCR_TF1CS_MSK)
 #define CFG_CMXFCR_VALUE1	(CMXFCR_RF1CS_CLK11 | CMXFCR_TF1CS_CLK12)
 #define CFG_CPMFCR_RAMTYPE	0
 #define CFG_FCC_PSMR		(FCC_PSMR_FDE | FCC_PSMR_LPB)
@@ -334,7 +535,8 @@
 
 #if defined(CONFIG_ETHER_ON_FCC) && (CONFIG_ETHER_INDEX == 2)
 #define CONFIG_ETHER_ON_FCC2
-#define CFG_CMXFCR_MASK2	(CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK)
+#define CFG_CMXFCR_MASK2	(CMXFCR_FC2 | CMXFCR_RF2CS_MSK | \
+				 CMXFCR_TF2CS_MSK)
 #define CFG_CMXFCR_VALUE2	(CMXFCR_RF2CS_CLK16 | CMXFCR_TF2CS_CLK13)
 #define CFG_CPMFCR_RAMTYPE	0
 #define CFG_FCC_PSMR		(FCC_PSMR_FDE | FCC_PSMR_LPB)
@@ -342,7 +544,8 @@
 
 #if defined(CONFIG_ETHER_ON_FCC) && (CONFIG_ETHER_INDEX == 3)
 #define CONFIG_ETHER_ON_FCC3
-#define CFG_CMXFCR_MASK3	(CMXFCR_FC3 | CMXFCR_RF3CS_MSK | CMXFCR_TF3CS_MSK)
+#define CFG_CMXFCR_MASK3	(CMXFCR_FC3 | CMXFCR_RF3CS_MSK | \
+				 CMXFCR_TF3CS_MSK)
 #define CFG_CMXFCR_VALUE3	(CMXFCR_RF3CS_CLK15 | CMXFCR_TF3CS_CLK14)
 #define CFG_CPMFCR_RAMTYPE	0
 #define CFG_FCC_PSMR		(FCC_PSMR_FDE | FCC_PSMR_LPB)
@@ -352,17 +555,21 @@
  * Environment
  */
 #define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_ADDR		(CFG_MONITOR_BASE - 0x20000)
-#define CFG_ENV_SECT_SIZE	0x20000 /* 128K(one sector) for env	*/
+
+#ifdef CONFIG_TQM_FLASH_N_TYPE
+#define CFG_ENV_SECT_SIZE	0x40000 /* 256K (one sector) for env	*/
+#else /* !CONFIG_TQM_FLASH_N_TYPE */
+#define CFG_ENV_SECT_SIZE	0x20000 /* 128K (one sector) for env	*/
+#endif /* CONFIG_TQM_FLASH_N_TYPE */
+#define CFG_ENV_ADDR		(CFG_MONITOR_BASE - CFG_ENV_SECT_SIZE)
 #define CFG_ENV_SIZE		0x2000
-#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
+#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR - CFG_ENV_SECT_SIZE)
 #define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
 #define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
-#define	CONFIG_TIMESTAMP		/* Print image info with ts	*/
-
+#define	CONFIG_TIMESTAMP	/* Print image info with ts	*/
 
 /*
  * BOOTP options
@@ -372,6 +579,25 @@
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_HOSTNAME
 
+#ifdef CONFIG_NAND
+/*
+ * Use NAND-FLash as JFFS2 device
+ */
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_JFFS2
+
+#define	CONFIG_JFFS2_NAND	1
+
+#ifdef CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT		"nand0=TQM85xx-nand"
+#define MTDPARTS_DEFAULT	"mtdparts=TQM85xx-nand:-"
+#else
+#define CONFIG_JFFS2_DEV 	"nand0"	/* NAND device jffs2 lives on	*/
+#define CONFIG_JFFS2_PART_OFFSET 0	/* start of jffs2 partition	*/
+#define CONFIG_JFFS2_PART_SIZE	0x200000 /* size of jffs2 partition	*/
+#endif /* CONFIG_JFFS2_CMDLINE */
+
+#endif /* CONFIG_NAND */
 
 /*
  * Command line configuration.
@@ -389,10 +615,9 @@
 #define CONFIG_CMD_MII
 
 #if defined(CONFIG_PCI)
-    #define CONFIG_CMD_PCI
+#define CONFIG_CMD_PCI
 #endif
 
-
 #undef CONFIG_WATCHDOG			/* watchdog disabled		*/
 
 /*
@@ -403,12 +628,13 @@
 #define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
 
 #if defined(CONFIG_CMD_KGDB)
-    #define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
-    #define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
 
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buf Size	*/
+#define CFG_PBSIZE	(CFG_CBSIZE + \
+			 sizeof(CFG_PROMPT) + 16)   /* Print Buf Size	*/
 #define CFG_MAXARGS	16		/* max number of command args	*/
 #define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
 #define CFG_HZ		1000		/* decrementer freq: 1ms ticks	*/
@@ -433,7 +659,6 @@
 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use	*/
 #endif
 
-
 #define CONFIG_LOADADDR	 200000		/* default addr for tftp & bootm*/
 
 #define CONFIG_BOOTDELAY 5		/* -1 disables auto-boot	*/
@@ -444,10 +669,26 @@
 
 #undef	CONFIG_BOOTARGS		/* the boot command will set bootargs	*/
 
+
+/*
+ * Setup some board specific values for the default environment variables
+ */
+#ifdef CONFIG_CPM2
+#define CFG_ENV_CONSDEV		"consdev=ttyCPM0\0"
+#else
+#define CFG_ENV_CONSDEV		"consdev=ttyS0\0"
+#endif
+#define CFG_ENV_FDT_FILE	"fdt_file="MK_STR(CONFIG_HOSTNAME)"/" \
+				MK_STR(CONFIG_HOSTNAME)".dtb\0"
+#define CFG_ENV_BOOTFILE	"bootfile="MK_STR(CONFIG_HOSTNAME)"/uImage\0"
+#define CFG_ENV_UBOOT		"uboot="MK_STR(CONFIG_HOSTNAME)"/u-boot.bin\0" \
+				"uboot_addr="MK_STR(TEXT_BASE)"\0"
+
 #define	CONFIG_EXTRA_ENV_SETTINGS					\
-	"bootfile="CFG_BOOTFILE_PATH"\0"				\
+	CFG_ENV_BOOTFILE						\
+	CFG_ENV_FDT_FILE						\
+	CFG_ENV_CONSDEV							\
 	"netdev=eth0\0"							\
-	"consdev=ttyS0\0"						\
 	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
 		"nfsroot=$serverip:$rootpath\0"				\
 	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
@@ -457,20 +698,27 @@
 	"addcons=setenv bootargs $bootargs "				\
 		"console=$consdev,$baudrate\0"				\
 	"flash_nfs=run nfsargs addip addcons;"				\
-		"bootm $kernel_addr\0"					\
+		"bootm $kernel_addr - $fdt_addr\0"			\
 	"flash_self=run ramargs addip addcons;"				\
-		"bootm $kernel_addr $ramdisk_addr\0"			\
-	"net_nfs=tftp $loadaddr $bootfile;"				\
-		"run nfsargs addip addcons;bootm\0"			\
+		"bootm $kernel_addr $ramdisk_addr $fdt_addr\0"		\
+	"net_nfs=tftp $kernel_addr_r $bootfile;"       			\
+		"tftp $fdt_addr_r $fdt_file;"				\
+		"run nfsargs addip addcons;"				\
+		"bootm $kernel_addr_r - $fdt_addr_r\0"    		\
 	"rootpath=/opt/eldk/ppc_85xx\0"					\
-	"kernel_addr=FE000000\0"					\
-	"ramdisk_addr=FE180000\0"					\
-	"load=tftp 100000 /tftpboot/$hostname/u-boot.bin\0"		\
-	"update=protect off fffc0000 ffffffff;era fffc0000 ffffffff;"	\
-		"cp.b 100000 fffc0000 40000;"			        \
+	"fdt_addr_r=900000\0"						\
+	"kernel_addr_r=1000000\0"      					\
+	"fdt_addr=ffec0000\0"						\
+	"kernel_addr=ffd00000\0"					\
+	"ramdisk_addr=ff800000\0"					\
+	CFG_ENV_UBOOT							\
+	"load=tftp 100000 $uboot\0"					\
+	"update=protect off $uboot_addr +$filesize;"			\
+		"erase $uboot_addr +$filesize;"				\
+		"cp.b 100000 $uboot_addr $filesize;"			\
 		"setenv filesize;saveenv\0"				\
 	"upd=run load update\0"						\
 	""
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
-#endif	/* __CONFIG_H */
+#endif /* __CONFIG_H */
diff --git a/include/configs/sbc8560.h b/include/configs/sbc8560.h
index 81a1e07..146eafe 100644
--- a/include/configs/sbc8560.h
+++ b/include/configs/sbc8560.h
@@ -42,6 +42,7 @@
 
 #define CONFIG_CPM2		1	/* has CPM2 */
 #define CONFIG_SBC8560		1	/* configuration for SBC8560 board */
+#define CONFIG_MPC8560		1
 
 /* XXX flagging this as something I might want to delete */
 #define CONFIG_MPC8560ADS	1	/* MPC8560ADS board specific	*/
diff --git a/include/configs/socrates.h b/include/configs/socrates.h
index 6dc9eff..1627413 100644
--- a/include/configs/socrates.h
+++ b/include/configs/socrates.h
@@ -165,7 +165,7 @@
 #define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
 
 #define CFG_MONITOR_LEN		(256 * 1024)	/* Reserve 256kB for Mon*/
-#define CFG_MALLOC_LEN		(128 * 1024)	/* Reserved for malloc	*/
+#define CFG_MALLOC_LEN		(256 * 1024)	/* Reserved for malloc	*/
 
 /* Serial Port */
 
@@ -216,11 +216,6 @@
 #define CFG_EEPROM_PAGE_WRITE_ENABLE	/* necessary for the LM75 chip */
 #define CFG_EEPROM_PAGE_WRITE_BITS	4
 
-/* RapidIO MMU */
-#define CFG_RIO_MEM_BASE	0xc0000000	/* base address		*/
-#define CFG_RIO_MEM_PHYS	CFG_RIO_MEM_BASE
-#define CFG_RIO_MEM_SIZE	0x20000000	/* 128M			*/
-
 /*
  * General PCI
  * Memory space is mapped 1-1.
@@ -238,13 +233,7 @@
 
 #if defined(CONFIG_PCI)
 #define CONFIG_PCI_PNP			/* do pci plug-and-play		*/
-
-#define CONFIG_EEPRO100
-#undef CONFIG_TULIP
-
-#define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup	*/
-#define CFG_PCI_SUBSYS_VENDORID 0x1057	/* Motorola			*/
-
+#undef CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup	*/
 #endif	/* CONFIG_PCI */
 
 
@@ -390,10 +379,10 @@
 		"tftp ${fdt_addr_r} ${fdt_file}; "			\
 		"run nfsargs addip addcons;"				\
 		"bootm ${kernel_addr_r} - ${fdt_addr_r}\0"		\
-	"fdt_file=$hostname/socrates.dtb\0"					\
+	"fdt_file=$hostname/socrates.dtb\0"				\
 	"fdt_addr_r=B00000\0"						\
 	"fdt_addr=FC1E0000\0"						\
-	"rootpath=/opt/eldk/ppc_85xx\0"					\
+	"rootpath=/opt/eldk/ppc_85xxDP\0"				\
 	"kernel_addr=FC000000\0"					\
 	"kernel_addr_r=200000\0"					\
 	"ramdisk_addr=FC200000\0"					\
@@ -420,4 +409,14 @@
 #define CONFIG_DOS_PARTITION		1
 #define CONFIG_USB_STORAGE		1
 
+/* FPGA and NAND */
+#define CFG_FPGA_BASE			0xc0000000
+#define CFG_BR3_PRELIM			0xc0001881 /* UPMA, 32-bit */
+#define CFG_OR3_PRELIM			0xfff00000  /* 1 MB */
+
+#define CFG_NAND_BASE			(CFG_FPGA_BASE + 0x70)
+#define CFG_MAX_NAND_DEVICE		1
+#define NAND_MAX_CHIPS			1
+#define CONFIG_CMD_NAND
+
 #endif	/* __CONFIG_H */
diff --git a/include/configs/stxgp3.h b/include/configs/stxgp3.h
index ec04a30..6e8213d 100644
--- a/include/configs/stxgp3.h
+++ b/include/configs/stxgp3.h
@@ -41,6 +41,7 @@
 #define CONFIG_MPC85xx		1	/* MPC8540/MPC8560	*/
 #define CONFIG_CPM2		1	/* has CPM2 */
 #define CONFIG_STXGP3		1	/* Silicon Tx GPPP board specific*/
+#define CONFIG_MPC8560		1
 
 #undef  CONFIG_PCI			/* pci ethernet support	*/
 #define CONFIG_TSEC_ENET		/* tsec ethernet support*/
diff --git a/include/configs/stxssa.h b/include/configs/stxssa.h
index d033c86..a1e9789 100644
--- a/include/configs/stxssa.h
+++ b/include/configs/stxssa.h
@@ -41,6 +41,7 @@
 #define CONFIG_MPC85xx		1	/* MPC8540/MPC8560	*/
 #define CONFIG_CPM2		1	/* has CPM2 */
 #define CONFIG_STXSSA		1	/* Silicon Tx GPPP SSA board specific*/
+#define CONFIG_MPC8560		1
 
 #define CONFIG_PCI			/* PCI ethernet support	*/
 #define CONFIG_TSEC_ENET		/* tsec ethernet support*/
diff --git a/include/linux/mtd/fsl_upm.h b/include/linux/mtd/fsl_upm.h
index 634ff02..49fd8a6 100644
--- a/include/linux/mtd/fsl_upm.h
+++ b/include/linux/mtd/fsl_upm.h
@@ -16,7 +16,6 @@
 #include <linux/mtd/nand.h>
 
 struct fsl_upm {
-	const u32 *array;
 	void __iomem *mdr;
 	void __iomem *mxmr;
 	void __iomem *mar;
diff --git a/include/linux/mtd/mtd-abi.h b/include/linux/mtd/mtd-abi.h
index 72d7341..4cebea9 100644
--- a/include/linux/mtd/mtd-abi.h
+++ b/include/linux/mtd/mtd-abi.h
@@ -93,7 +93,7 @@ struct nand_oobinfo {
 	uint32_t useecc;
 	uint32_t eccbytes;
 	uint32_t oobfree[8][2];
-	uint32_t eccpos[32];
+	uint32_t eccpos[48];
 };
 
 #endif /* __MTD_ABI_H__ */