diff options
Diffstat (limited to 'u-boot/arch/arm/cpu/arm1176')
19 files changed, 2656 insertions, 0 deletions
diff --git a/u-boot/arch/arm/cpu/arm1176/Makefile b/u-boot/arch/arm/cpu/arm1176/Makefile new file mode 100644 index 0000000..7ec869b --- /dev/null +++ b/u-boot/arch/arm/cpu/arm1176/Makefile @@ -0,0 +1,50 @@ +# +# (C) Copyright 2000-2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# (C) Copyright 2008 +# Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(CPU).o + +START = start.o +COBJS = cpu.o + +SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS)) +START := $(addprefix $(obj),$(START)) + +all: $(obj).depend $(START) $(LIB) + +$(LIB): $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/u-boot/arch/arm/cpu/arm1176/config.mk b/u-boot/arch/arm/cpu/arm1176/config.mk new file mode 100644 index 0000000..14346cf --- /dev/null +++ b/u-boot/arch/arm/cpu/arm1176/config.mk @@ -0,0 +1,32 @@ +# +# (C) Copyright 2002 +# Gary Jennejohn, DENX Software Engineering, <garyj@denx.de> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# +PLATFORM_RELFLAGS += -fno-common -ffixed-r8 -msoft-float + +# Make ARMv5 to allow more compilers to work, even though its v6. +PLATFORM_CPPFLAGS += -march=armv5t +# ========================================================================= +# +# Supply options according to compiler version +# +# ========================================================================= +PLATFORM_RELFLAGS +=$(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) diff --git a/u-boot/arch/arm/cpu/arm1176/cpu.c b/u-boot/arch/arm/cpu/arm1176/cpu.c new file mode 100644 index 0000000..c0fd114 --- /dev/null +++ b/u-boot/arch/arm/cpu/arm1176/cpu.c @@ -0,0 +1,67 @@ +/* + * (C) Copyright 2004 Texas Insturments + * + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH <www.elinos.com> + * Marius Groeger <mgroeger@sysgo.de> + * + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * CPU specific code + */ + +#include <common.h> +#include <command.h> +#include <asm/system.h> + +static void cache_flush (void); + +int cleanup_before_linux (void) +{ + /* + * this function is called just before we call linux + * it prepares the processor for linux + * + * we turn off caches etc ... + */ + + disable_interrupts (); + + /* turn off I/D-cache */ + icache_disable(); + dcache_disable(); + /* flush I/D-cache */ + cache_flush(); + + return 0; +} + +/* flush I/D-cache */ +static void cache_flush (void) +{ + /* invalidate both caches and flush btb */ + asm ("mcr p15, 0, %0, c7, c7, 0": :"r" (0)); + /* mem barrier to sync things */ + asm ("mcr p15, 0, %0, c7, c10, 4": :"r" (0)); +} diff --git a/u-boot/arch/arm/cpu/arm1176/s3c64xx/Makefile b/u-boot/arch/arm/cpu/arm1176/s3c64xx/Makefile new file mode 100644 index 0000000..0785b19 --- /dev/null +++ b/u-boot/arch/arm/cpu/arm1176/s3c64xx/Makefile @@ -0,0 +1,50 @@ +# +# (C) Copyright 2000-2003 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# (C) Copyright 2008 +# Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(SOC).o + +SOBJS = reset.o + +COBJS-$(CONFIG_S3C6400) += cpu_init.o speed.o +COBJS-y += timer.o + +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS-y)) + +all: $(obj).depend $(START) $(LIB) + +$(LIB): $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/u-boot/arch/arm/cpu/arm1176/s3c64xx/config.mk b/u-boot/arch/arm/cpu/arm1176/s3c64xx/config.mk new file mode 100644 index 0000000..14346cf --- /dev/null +++ b/u-boot/arch/arm/cpu/arm1176/s3c64xx/config.mk @@ -0,0 +1,32 @@ +# +# (C) Copyright 2002 +# Gary Jennejohn, DENX Software Engineering, <garyj@denx.de> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# +PLATFORM_RELFLAGS += -fno-common -ffixed-r8 -msoft-float + +# Make ARMv5 to allow more compilers to work, even though its v6. +PLATFORM_CPPFLAGS += -march=armv5t +# ========================================================================= +# +# Supply options according to compiler version +# +# ========================================================================= +PLATFORM_RELFLAGS +=$(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) diff --git a/u-boot/arch/arm/cpu/arm1176/s3c64xx/cpu_init.S b/u-boot/arch/arm/cpu/arm1176/s3c64xx/cpu_init.S new file mode 100644 index 0000000..df88cba --- /dev/null +++ b/u-boot/arch/arm/cpu/arm1176/s3c64xx/cpu_init.S @@ -0,0 +1,135 @@ +/* + * Originates from Samsung's u-boot 1.1.6 port to S3C6400 / SMDK6400 + * + * Copyright (C) 2008 + * Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <asm/arch/s3c6400.h> + + .globl mem_ctrl_asm_init +mem_ctrl_asm_init: + /* DMC1 base address 0x7e001000 */ + ldr r0, =ELFIN_DMC1_BASE + + ldr r1, =0x4 + str r1, [r0, #INDEX_DMC_MEMC_CMD] + + ldr r1, =DMC_DDR_REFRESH_PRD + str r1, [r0, #INDEX_DMC_REFRESH_PRD] + + ldr r1, =DMC_DDR_CAS_LATENCY + str r1, [r0, #INDEX_DMC_CAS_LATENCY] + + ldr r1, =DMC_DDR_t_DQSS + str r1, [r0, #INDEX_DMC_T_DQSS] + + ldr r1, =DMC_DDR_t_MRD + str r1, [r0, #INDEX_DMC_T_MRD] + + ldr r1, =DMC_DDR_t_RAS + str r1, [r0, #INDEX_DMC_T_RAS] + + ldr r1, =DMC_DDR_t_RC + str r1, [r0, #INDEX_DMC_T_RC] + + ldr r1, =DMC_DDR_t_RCD + ldr r2, =DMC_DDR_schedule_RCD + orr r1, r1, r2 + str r1, [r0, #INDEX_DMC_T_RCD] + + ldr r1, =DMC_DDR_t_RFC + ldr r2, =DMC_DDR_schedule_RFC + orr r1, r1, r2 + str r1, [r0, #INDEX_DMC_T_RFC] + + ldr r1, =DMC_DDR_t_RP + ldr r2, =DMC_DDR_schedule_RP + orr r1, r1, r2 + str r1, [r0, #INDEX_DMC_T_RP] + + ldr r1, =DMC_DDR_t_RRD + str r1, [r0, #INDEX_DMC_T_RRD] + + ldr r1, =DMC_DDR_t_WR + str r1, [r0, #INDEX_DMC_T_WR] + + ldr r1, =DMC_DDR_t_WTR + str r1, [r0, #INDEX_DMC_T_WTR] + + ldr r1, =DMC_DDR_t_XP + str r1, [r0, #INDEX_DMC_T_XP] + + ldr r1, =DMC_DDR_t_XSR + str r1, [r0, #INDEX_DMC_T_XSR] + + ldr r1, =DMC_DDR_t_ESR + str r1, [r0, #INDEX_DMC_T_ESR] + + ldr r1, =DMC1_MEM_CFG + str r1, [r0, #INDEX_DMC_MEMORY_CFG] + + ldr r1, =DMC1_MEM_CFG2 + str r1, [r0, #INDEX_DMC_MEMORY_CFG2] + + ldr r1, =DMC1_CHIP0_CFG + str r1, [r0, #INDEX_DMC_CHIP_0_CFG] + + ldr r1, =DMC_DDR_32_CFG + str r1, [r0, #INDEX_DMC_USER_CONFIG] + + /* DMC0 DDR Chip 0 configuration direct command reg */ + ldr r1, =DMC_NOP0 + str r1, [r0, #INDEX_DMC_DIRECT_CMD] + + /* Precharge All */ + ldr r1, =DMC_PA0 + str r1, [r0, #INDEX_DMC_DIRECT_CMD] + + /* Auto Refresh 2 time */ + ldr r1, =DMC_AR0 + str r1, [r0, #INDEX_DMC_DIRECT_CMD] + str r1, [r0, #INDEX_DMC_DIRECT_CMD] + + /* MRS */ + ldr r1, =DMC_mDDR_EMR0 + str r1, [r0, #INDEX_DMC_DIRECT_CMD] + + /* Mode Reg */ + ldr r1, =DMC_mDDR_MR0 + str r1, [r0, #INDEX_DMC_DIRECT_CMD] + + /* Enable DMC1 */ + mov r1, #0x0 + str r1, [r0, #INDEX_DMC_MEMC_CMD] + +check_dmc1_ready: + ldr r1, [r0, #INDEX_DMC_MEMC_STATUS] + mov r2, #0x3 + and r1, r1, r2 + cmp r1, #0x1 + bne check_dmc1_ready + nop + + mov pc, lr + + .ltorg diff --git a/u-boot/arch/arm/cpu/arm1176/s3c64xx/reset.S b/u-boot/arch/arm/cpu/arm1176/s3c64xx/reset.S new file mode 100644 index 0000000..eae572e --- /dev/null +++ b/u-boot/arch/arm/cpu/arm1176/s3c64xx/reset.S @@ -0,0 +1,34 @@ +/* + * Copyright (c) 2009 Samsung Electronics. + * Minkyu Kang <mk7.kang@samsung.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <asm/arch/s3c6400.h> + +.globl reset_cpu +reset_cpu: + ldr r1, =ELFIN_CLOCK_POWER_BASE + ldr r2, [r1, #SYS_ID_OFFSET] + ldr r3, =0xffff + and r2, r3, r2, lsr #12 + str r2, [r1, #SW_RST_OFFSET] +_loop_forever: + b _loop_forever diff --git a/u-boot/arch/arm/cpu/arm1176/s3c64xx/speed.c b/u-boot/arch/arm/cpu/arm1176/s3c64xx/speed.c new file mode 100644 index 0000000..11962ac --- /dev/null +++ b/u-boot/arch/arm/cpu/arm1176/s3c64xx/speed.c @@ -0,0 +1,145 @@ +/* + * (C) Copyright 2001-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * (C) Copyright 2002 + * David Mueller, ELSOFT AG, d.mueller@elsoft.ch + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * This code should work for both the S3C2400 and the S3C2410 + * as they seem to have the same PLL and clock machinery inside. + * The different address mapping is handled by the s3c24xx.h files below. + */ + +#include <common.h> +#include <asm/arch/s3c6400.h> + +#define APLL 0 +#define MPLL 1 +#define EPLL 2 + +/* ------------------------------------------------------------------------- */ +/* + * NOTE: This describes the proper use of this file. + * + * CONFIG_SYS_CLK_FREQ should be defined as the input frequency of the PLL. + * + * get_FCLK(), get_HCLK(), get_PCLK() and get_UCLK() return the clock of + * the specified bus in HZ. + */ +/* ------------------------------------------------------------------------- */ + +static ulong get_PLLCLK(int pllreg) +{ + ulong r, m, p, s; + + switch (pllreg) { + case APLL: + r = APLL_CON_REG; + break; + case MPLL: + r = MPLL_CON_REG; + break; + case EPLL: + r = EPLL_CON0_REG; + break; + default: + hang(); + } + + m = (r >> 16) & 0x3ff; + p = (r >> 8) & 0x3f; + s = r & 0x7; + + return m * (CONFIG_SYS_CLK_FREQ / (p * (1 << s))); +} + +/* return ARMCORE frequency */ +ulong get_ARMCLK(void) +{ + ulong div; + + div = CLK_DIV0_REG; + + return get_PLLCLK(APLL) / ((div & 0x7) + 1); +} + +/* return FCLK frequency */ +ulong get_FCLK(void) +{ + return get_PLLCLK(APLL); +} + +/* return HCLK frequency */ +ulong get_HCLK(void) +{ + ulong fclk; + + uint hclkx2_div = ((CLK_DIV0_REG >> 9) & 0x7) + 1; + uint hclk_div = ((CLK_DIV0_REG >> 8) & 0x1) + 1; + + /* + * Bit 7 exists on s3c6410, and not on s3c6400, it is reserved on + * s3c6400 and is always 0, and it is indeed running in ASYNC mode + */ + if (OTHERS_REG & 0x80) + fclk = get_FCLK(); /* SYNC Mode */ + else + fclk = get_PLLCLK(MPLL); /* ASYNC Mode */ + + return fclk / (hclk_div * hclkx2_div); +} + +/* return PCLK frequency */ +ulong get_PCLK(void) +{ + ulong fclk; + uint hclkx2_div = ((CLK_DIV0_REG >> 9) & 0x7) + 1; + uint pre_div = ((CLK_DIV0_REG >> 12) & 0xf) + 1; + + if (OTHERS_REG & 0x80) + fclk = get_FCLK(); /* SYNC Mode */ + else + fclk = get_PLLCLK(MPLL); /* ASYNC Mode */ + + return fclk / (hclkx2_div * pre_div); +} + +/* return UCLK frequency */ +ulong get_UCLK(void) +{ + return get_PLLCLK(EPLL); +} + +int print_cpuinfo(void) +{ + printf("\nCPU: S3C6400@%luMHz\n", get_ARMCLK() / 1000000); + printf(" Fclk = %luMHz, Hclk = %luMHz, Pclk = %luMHz ", + get_FCLK() / 1000000, get_HCLK() / 1000000, + get_PCLK() / 1000000); + + if (OTHERS_REG & 0x80) + printf("(SYNC Mode) \n"); + else + printf("(ASYNC Mode) \n"); + return 0; +} diff --git a/u-boot/arch/arm/cpu/arm1176/s3c64xx/timer.c b/u-boot/arch/arm/cpu/arm1176/s3c64xx/timer.c new file mode 100644 index 0000000..9768319 --- /dev/null +++ b/u-boot/arch/arm/cpu/arm1176/s3c64xx/timer.c @@ -0,0 +1,177 @@ +/* + * (C) Copyright 2003 + * Texas Instruments <www.ti.com> + * + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH <www.elinos.com> + * Marius Groeger <mgroeger@sysgo.de> + * + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH <www.elinos.com> + * Alex Zuepke <azu@sysgo.de> + * + * (C) Copyright 2002-2004 + * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de> + * + * (C) Copyright 2004 + * Philippe Robin, ARM Ltd. <philippe.robin@arm.com> + * + * (C) Copyright 2008 + * Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/proc-armv/ptrace.h> +#include <asm/arch/s3c6400.h> +#include <div64.h> + +static ulong timer_load_val; + +#define PRESCALER 167 + +static s3c64xx_timers *s3c64xx_get_base_timers(void) +{ + return (s3c64xx_timers *)ELFIN_TIMER_BASE; +} + +/* macro to read the 16 bit timer */ +static inline ulong read_timer(void) +{ + s3c64xx_timers *const timers = s3c64xx_get_base_timers(); + + return timers->TCNTO4; +} + +/* Internal tick units */ +/* Last decremneter snapshot */ +static unsigned long lastdec; +/* Monotonic incrementing timer */ +static unsigned long long timestamp; + +int timer_init(void) +{ + s3c64xx_timers *const timers = s3c64xx_get_base_timers(); + + /* use PWM Timer 4 because it has no output */ + /* + * We use the following scheme for the timer: + * Prescaler is hard fixed at 167, divider at 1/4. + * This gives at PCLK frequency 66MHz approx. 10us ticks + * The timer is set to wrap after 100s, at 66MHz this obviously + * happens after 10,000,000 ticks. A long variable can thus + * keep values up to 40,000s, i.e., 11 hours. This should be + * enough for most uses:-) Possible optimizations: select a + * binary-friendly frequency, e.g., 1ms / 128. Also calculate + * the prescaler automatically for other PCLK frequencies. + */ + timers->TCFG0 = PRESCALER << 8; + if (timer_load_val == 0) { + timer_load_val = get_PCLK() / PRESCALER * (100 / 4); /* 100s */ + timers->TCFG1 = (timers->TCFG1 & ~0xf0000) | 0x20000; + } + + /* load value for 10 ms timeout */ + lastdec = timers->TCNTB4 = timer_load_val; + /* auto load, manual update of Timer 4 */ + timers->TCON = (timers->TCON & ~0x00700000) | TCON_4_AUTO | + TCON_4_UPDATE; + + /* auto load, start Timer 4 */ + timers->TCON = (timers->TCON & ~0x00700000) | TCON_4_AUTO | COUNT_4_ON; + timestamp = 0; + + return 0; +} + +/* + * timer without interrupts + */ + +/* + * This function is derived from PowerPC code (read timebase as long long). + * On ARM it just returns the timer value. + */ +unsigned long long get_ticks(void) +{ + ulong now = read_timer(); + + if (lastdec >= now) { + /* normal mode */ + timestamp += lastdec - now; + } else { + /* we have an overflow ... */ + timestamp += lastdec + timer_load_val - now; + } + lastdec = now; + + return timestamp; +} + +/* + * This function is derived from PowerPC code (timebase clock frequency). + * On ARM it returns the number of timer ticks per second. + */ +ulong get_tbclk(void) +{ + /* We overrun in 100s */ + return (ulong)(timer_load_val / 100); +} + +void reset_timer_masked(void) +{ + /* reset time */ + lastdec = read_timer(); + timestamp = 0; +} + +void reset_timer(void) +{ + reset_timer_masked(); +} + +ulong get_timer_masked(void) +{ + unsigned long long res = get_ticks(); + do_div (res, (timer_load_val / (100 * CONFIG_SYS_HZ))); + return res; +} + +ulong get_timer(ulong base) +{ + return get_timer_masked() - base; +} + +void set_timer(ulong t) +{ + timestamp = t * (timer_load_val / (100 * CONFIG_SYS_HZ)); +} + +void __udelay(unsigned long usec) +{ + unsigned long long tmp; + ulong tmo; + + tmo = (usec + 9) / 10; + tmp = get_ticks() + tmo; /* get current timestamp */ + + while (get_ticks() < tmp)/* loop till event */ + /*NOP*/; +} diff --git a/u-boot/arch/arm/cpu/arm1176/start.S b/u-boot/arch/arm/cpu/arm1176/start.S new file mode 100644 index 0000000..363329a --- /dev/null +++ b/u-boot/arch/arm/cpu/arm1176/start.S @@ -0,0 +1,572 @@ +/* + * armboot - Startup Code for ARM1176 CPU-core + * + * Copyright (c) 2007 Samsung Electronics + * + * Copyright (C) 2008 + * Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * 2007-09-21 - Restructured codes by jsgood (jsgood.yang@samsung.com) + * 2007-09-21 - Added MoviNAND and OneNAND boot codes by + * jsgood (jsgood.yang@samsung.com) + * Base codes by scsuh (sc.suh) + */ + +#include <asm-offsets.h> +#include <config.h> +#include <version.h> +#ifdef CONFIG_ENABLE_MMU +#include <asm/proc/domain.h> +#endif + +#if !defined(CONFIG_ENABLE_MMU) && !defined(CONFIG_SYS_PHY_UBOOT_BASE) +#define CONFIG_SYS_PHY_UBOOT_BASE CONFIG_SYS_UBOOT_BASE +#endif + +/* + ************************************************************************* + * + * Jump vector table as in table 3.1 in [1] + * + ************************************************************************* + */ + +.globl _start +_start: b reset +#ifndef CONFIG_NAND_SPL + ldr pc, _undefined_instruction + ldr pc, _software_interrupt + ldr pc, _prefetch_abort + ldr pc, _data_abort + ldr pc, _not_used + ldr pc, _irq + ldr pc, _fiq + +_undefined_instruction: + .word undefined_instruction +_software_interrupt: + .word software_interrupt +_prefetch_abort: + .word prefetch_abort +_data_abort: + .word data_abort +_not_used: + .word not_used +_irq: + .word irq +_fiq: + .word fiq +_pad: + .word 0x12345678 /* now 16*4=64 */ +#else + . = _start + 64 +#endif + +.global _end_vect +_end_vect: + .balignl 16,0xdeadbeef +/* + ************************************************************************* + * + * Startup Code (reset vector) + * + * do important init only if we don't start from memory! + * setup Memory and board specific bits prior to relocation. + * relocate armboot to ram + * setup stack + * + ************************************************************************* + */ + +.globl _TEXT_BASE +_TEXT_BASE: + .word CONFIG_SYS_TEXT_BASE + +/* + * Below variable is very important because we use MMU in U-Boot. + * Without it, we cannot run code correctly before MMU is ON. + * by scsuh. + */ +_TEXT_PHY_BASE: + .word CONFIG_SYS_PHY_UBOOT_BASE + +/* + * These are defined in the board-specific linker script. + * Subtracting _start from them lets the linker put their + * relative position in the executable instead of leaving + * them null. + */ + +.globl _bss_start_ofs +_bss_start_ofs: + .word __bss_start - _start + +.globl _bss_end_ofs +_bss_end_ofs: + .word _end - _start + +/* IRQ stack memory (calculated at run-time) + 8 bytes */ +.globl IRQ_STACK_START_IN +IRQ_STACK_START_IN: + .word 0x0badc0de + +/* + * the actual reset code + */ + +reset: + /* + * set the cpu to SVC32 mode + */ + mrs r0, cpsr + bic r0, r0, #0x3f + orr r0, r0, #0xd3 + msr cpsr, r0 + +/* + ************************************************************************* + * + * CPU_init_critical registers + * + * setup important registers + * setup memory timing + * + ************************************************************************* + */ + /* + * we do sys-critical inits only at reboot, + * not when booting from ram! + */ +cpu_init_crit: + /* + * When booting from NAND - it has definitely been a reset, so, no need + * to flush caches and disable the MMU + */ +#ifndef CONFIG_NAND_SPL + /* + * flush v4 I/D caches + */ + mov r0, #0 + mcr p15, 0, r0, c7, c7, 0 /* flush v3/v4 cache */ + mcr p15, 0, r0, c8, c7, 0 /* flush v4 TLB */ + + /* + * disable MMU stuff and caches + */ + mrc p15, 0, r0, c1, c0, 0 + bic r0, r0, #0x00002300 @ clear bits 13, 9:8 (--V- --RS) + bic r0, r0, #0x00000087 @ clear bits 7, 2:0 (B--- -CAM) + orr r0, r0, #0x00000002 @ set bit 2 (A) Align + orr r0, r0, #0x00001000 @ set bit 12 (I) I-Cache + + /* Prepare to disable the MMU */ + adr r2, mmu_disable_phys + sub r2, r2, #(CONFIG_SYS_PHY_UBOOT_BASE - CONFIG_SYS_TEXT_BASE) + b mmu_disable + + .align 5 + /* Run in a single cache-line */ +mmu_disable: + mcr p15, 0, r0, c1, c0, 0 + nop + nop + mov pc, r2 +mmu_disable_phys: + +#ifdef CONFIG_DISABLE_TCM + /* + * Disable the TCMs + */ + mrc p15, 0, r0, c0, c0, 2 /* Return TCM details */ + cmp r0, #0 + beq skip_tcmdisable + mov r1, #0 + mov r2, #1 + tst r0, r2 + mcrne p15, 0, r1, c9, c1, 1 /* Disable Instruction TCM if present*/ + tst r0, r2, LSL #16 + mcrne p15, 0, r1, c9, c1, 0 /* Disable Data TCM if present*/ +skip_tcmdisable: +#endif +#endif + +#ifdef CONFIG_PERIPORT_REMAP + /* Peri port setup */ + ldr r0, =CONFIG_PERIPORT_BASE + orr r0, r0, #CONFIG_PERIPORT_SIZE + mcr p15,0,r0,c15,c2,4 +#endif + + /* + * Go setup Memory and board specific bits prior to relocation. + */ + bl lowlevel_init /* go setup pll,mux,memory */ + +/* Set stackpointer in internal RAM to call board_init_f */ +call_board_init_f: + ldr sp, =(CONFIG_SYS_INIT_SP_ADDR) + bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ + ldr r0,=0x00000000 + bl board_init_f + +/*------------------------------------------------------------------------------*/ + +/* + * void relocate_code (addr_sp, gd, addr_moni) + * + * This "function" does not return, instead it continues in RAM + * after relocating the monitor code. + * + */ + .globl relocate_code +relocate_code: + mov r4, r0 /* save addr_sp */ + mov r5, r1 /* save addr of gd */ + mov r6, r2 /* save addr of destination */ + + /* Set up the stack */ +stack_setup: + mov sp, r4 + + adr r0, _start + cmp r0, r6 + beq clear_bss /* skip relocation */ + mov r1, r6 /* r1 <- scratch for copy_loop */ + ldr r3, _bss_start_ofs + add r2, r0, r3 /* r2 <- source end address */ + +copy_loop: + ldmia r0!, {r9-r10} /* copy from source address [r0] */ + stmia r1!, {r9-r10} /* copy to target address [r1] */ + cmp r0, r2 /* until source end address [r2] */ + blo copy_loop + +#ifndef CONFIG_PRELOADER + /* + * fix .rel.dyn relocations + */ + ldr r0, _TEXT_BASE /* r0 <- Text base */ + sub r9, r6, r0 /* r9 <- relocation offset */ + ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */ + add r10, r10, r0 /* r10 <- sym table in FLASH */ + ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */ + add r2, r2, r0 /* r2 <- rel dyn start in FLASH */ + ldr r3, _rel_dyn_end_ofs /* r3 <- rel dyn end ofs */ + add r3, r3, r0 /* r3 <- rel dyn end in FLASH */ +fixloop: + ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */ + add r0, r0, r9 /* r0 <- location to fix up in RAM */ + ldr r1, [r2, #4] + and r7, r1, #0xff + cmp r7, #23 /* relative fixup? */ + beq fixrel + cmp r7, #2 /* absolute fixup? */ + beq fixabs + /* ignore unknown type of fixup */ + b fixnext +fixabs: + /* absolute fix: set location to (offset) symbol value */ + mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */ + add r1, r10, r1 /* r1 <- address of symbol in table */ + ldr r1, [r1, #4] /* r1 <- symbol value */ + add r1, r1, r9 /* r1 <- relocated sym addr */ + b fixnext +fixrel: + /* relative fix: increase location by offset */ + ldr r1, [r0] + add r1, r1, r9 +fixnext: + str r1, [r0] + add r2, r2, #8 /* each rel.dyn entry is 8 bytes */ + cmp r2, r3 + blo fixloop +#endif + +#ifdef CONFIG_ENABLE_MMU +enable_mmu: + /* enable domain access */ + ldr r5, =0x0000ffff + mcr p15, 0, r5, c3, c0, 0 /* load domain access register */ + + /* Set the TTB register */ + ldr r0, _mmu_table_base + ldr r1, =CONFIG_SYS_PHY_UBOOT_BASE + ldr r2, =0xfff00000 + bic r0, r0, r2 + orr r1, r0, r1 + mcr p15, 0, r1, c2, c0, 0 + + /* Enable the MMU */ + mrc p15, 0, r0, c1, c0, 0 + orr r0, r0, #1 /* Set CR_M to enable MMU */ + + /* Prepare to enable the MMU */ + adr r1, skip_hw_init + and r1, r1, #0x3fc + ldr r2, _TEXT_BASE + ldr r3, =0xfff00000 + and r2, r2, r3 + orr r2, r2, r1 + b mmu_enable + + .align 5 + /* Run in a single cache-line */ +mmu_enable: + + mcr p15, 0, r0, c1, c0, 0 + nop + nop + mov pc, r2 +skip_hw_init: +#endif + +clear_bss: +#ifndef CONFIG_PRELOADER + ldr r0, _bss_start_ofs + ldr r1, _bss_end_ofs + mov r4, r6 /* reloc addr */ + add r0, r0, r4 + add r1, r1, r4 + mov r2, #0x00000000 /* clear */ + +clbss_l:str r2, [r0] /* clear loop... */ + add r0, r0, #4 + cmp r0, r1 + bne clbss_l + + bl coloured_LED_init + bl red_LED_on +#endif + +/* + * We are done. Do not return, instead branch to second part of board + * initialization, now running from RAM. + */ +#ifdef CONFIG_NAND_SPL + ldr pc, _nand_boot + +_nand_boot: .word nand_boot +#else + ldr r0, _board_init_r_ofs + adr r1, _start + add lr, r0, r1 + add lr, lr, r9 + /* setup parameters for board_init_r */ + mov r0, r5 /* gd_t */ + mov r1, r6 /* dest_addr */ + /* jump to it ... */ + mov pc, lr + +_board_init_r_ofs: + .word board_init_r - _start +#endif + +_rel_dyn_start_ofs: + .word __rel_dyn_start - _start +_rel_dyn_end_ofs: + .word __rel_dyn_end - _start +_dynsym_start_ofs: + .word __dynsym_start - _start + +#ifdef CONFIG_ENABLE_MMU +_mmu_table_base: + .word mmu_table +#endif + +#ifndef CONFIG_NAND_SPL +/* + * we assume that cache operation is done before. (eg. cleanup_before_linux()) + * actually, we don't need to do anything about cache if not use d-cache in + * U-Boot. So, in this function we clean only MMU. by scsuh + * + * void theLastJump(void *kernel, int arch_num, uint boot_params); + */ +#ifdef CONFIG_ENABLE_MMU + .globl theLastJump +theLastJump: + mov r9, r0 + ldr r3, =0xfff00000 + ldr r4, _TEXT_PHY_BASE + adr r5, phy_last_jump + bic r5, r5, r3 + orr r5, r5, r4 + mov pc, r5 +phy_last_jump: + /* + * disable MMU stuff + */ + mrc p15, 0, r0, c1, c0, 0 + bic r0, r0, #0x00002300 /* clear bits 13, 9:8 (--V- --RS) */ + bic r0, r0, #0x00000087 /* clear bits 7, 2:0 (B--- -CAM) */ + orr r0, r0, #0x00000002 /* set bit 2 (A) Align */ + orr r0, r0, #0x00001000 /* set bit 12 (I) I-Cache */ + mcr p15, 0, r0, c1, c0, 0 + + mcr p15, 0, r0, c8, c7, 0 /* flush v4 TLB */ + + mov r0, #0 + mov pc, r9 +#endif + + +/* + ************************************************************************* + * + * Interrupt handling + * + ************************************************************************* + */ +@ +@ IRQ stack frame. +@ +#define S_FRAME_SIZE 72 + +#define S_OLD_R0 68 +#define S_PSR 64 +#define S_PC 60 +#define S_LR 56 +#define S_SP 52 + +#define S_IP 48 +#define S_FP 44 +#define S_R10 40 +#define S_R9 36 +#define S_R8 32 +#define S_R7 28 +#define S_R6 24 +#define S_R5 20 +#define S_R4 16 +#define S_R3 12 +#define S_R2 8 +#define S_R1 4 +#define S_R0 0 + +#define MODE_SVC 0x13 +#define I_BIT 0x80 + +/* + * use bad_save_user_regs for abort/prefetch/undef/swi ... + */ + + .macro bad_save_user_regs + /* carve out a frame on current user stack */ + sub sp, sp, #S_FRAME_SIZE + /* Save user registers (now in svc mode) r0-r12 */ + stmia sp, {r0 - r12} + + ldr r2, IRQ_STACK_START_IN + /* get values for "aborted" pc and cpsr (into parm regs) */ + ldmia r2, {r2 - r3} + /* grab pointer to old stack */ + add r0, sp, #S_FRAME_SIZE + + add r5, sp, #S_SP + mov r1, lr + /* save sp_SVC, lr_SVC, pc, cpsr */ + stmia r5, {r0 - r3} + /* save current stack into r0 (param register) */ + mov r0, sp + .endm + + .macro get_bad_stack + ldr r13, IRQ_STACK_START_IN @ setup our mode stack + + /* save caller lr in position 0 of saved stack */ + str lr, [r13] + /* get the spsr */ + mrs lr, spsr + /* save spsr in position 1 of saved stack */ + str lr, [r13, #4] + + /* prepare SVC-Mode */ + mov r13, #MODE_SVC + @ msr spsr_c, r13 + /* switch modes, make sure moves will execute */ + msr spsr, r13 + /* capture return pc */ + mov lr, pc + /* jump to next instruction & switch modes. */ + movs pc, lr + .endm + + .macro get_bad_stack_swi + /* space on current stack for scratch reg. */ + sub r13, r13, #4 + /* save R0's value. */ + str r0, [r13] + ldr r13, IRQ_STACK_START_IN @ setup our mode stack + /* save caller lr in position 0 of saved stack */ + str lr, [r0] + /* get the spsr */ + mrs r0, spsr + /* save spsr in position 1 of saved stack */ + str lr, [r0, #4] + /* restore r0 */ + ldr r0, [r13] + /* pop stack entry */ + add r13, r13, #4 + .endm + +/* + * exception handlers + */ + .align 5 +undefined_instruction: + get_bad_stack + bad_save_user_regs + bl do_undefined_instruction + + .align 5 +software_interrupt: + get_bad_stack_swi + bad_save_user_regs + bl do_software_interrupt + + .align 5 +prefetch_abort: + get_bad_stack + bad_save_user_regs + bl do_prefetch_abort + + .align 5 +data_abort: + get_bad_stack + bad_save_user_regs + bl do_data_abort + + .align 5 +not_used: + get_bad_stack + bad_save_user_regs + bl do_not_used + + .align 5 +irq: + get_bad_stack + bad_save_user_regs + bl do_irq + + .align 5 +fiq: + get_bad_stack + bad_save_user_regs + bl do_fiq +#endif /* CONFIG_NAND_SPL */ diff --git a/u-boot/arch/arm/cpu/arm1176/tnetv107x/Makefile b/u-boot/arch/arm/cpu/arm1176/tnetv107x/Makefile new file mode 100644 index 0000000..c63dc92 --- /dev/null +++ b/u-boot/arch/arm/cpu/arm1176/tnetv107x/Makefile @@ -0,0 +1,44 @@ +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(SOC).o + +COBJS += aemif.o clock.o init.o mux.o timer.o wdt.o +SOBJS += lowlevel_init.o + +SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) + +OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS)) +START := $(addprefix $(obj),$(START)) + +all: $(obj).depend $(LIB) + +$(LIB): $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/u-boot/arch/arm/cpu/arm1176/tnetv107x/aemif.c b/u-boot/arch/arm/cpu/arm1176/tnetv107x/aemif.c new file mode 100644 index 0000000..172f583 --- /dev/null +++ b/u-boot/arch/arm/cpu/arm1176/tnetv107x/aemif.c @@ -0,0 +1,93 @@ +/* + * TNETV107X: Asynchronous EMIF Configuration + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/clock.h> +#include <asm/arch/mux.h> + +#define ASYNC_EMIF_BASE TNETV107X_ASYNC_EMIF_CNTRL_BASE +#define ASYNC_EMIF_CONFIG(cs) (ASYNC_EMIF_BASE+0x10+(cs)*4) +#define ASYNC_EMIF_ONENAND_CONTROL (ASYNC_EMIF_BASE+0x5c) +#define ASYNC_EMIF_NAND_CONTROL (ASYNC_EMIF_BASE+0x60) +#define ASYNC_EMIF_WAITCYCLE_CONFIG (ASYNC_EMIF_BASE+0x4) + +#define CONFIG_SELECT_STROBE(v) ((v) ? 1 << 31 : 0) +#define CONFIG_EXTEND_WAIT(v) ((v) ? 1 << 30 : 0) +#define CONFIG_WR_SETUP(v) (((v) & 0x0f) << 26) +#define CONFIG_WR_STROBE(v) (((v) & 0x3f) << 20) +#define CONFIG_WR_HOLD(v) (((v) & 0x07) << 17) +#define CONFIG_RD_SETUP(v) (((v) & 0x0f) << 13) +#define CONFIG_RD_STROBE(v) (((v) & 0x3f) << 7) +#define CONFIG_RD_HOLD(v) (((v) & 0x07) << 4) +#define CONFIG_TURN_AROUND(v) (((v) & 0x03) << 2) +#define CONFIG_WIDTH(v) (((v) & 0x03) << 0) + +#define NUM_CS 4 + +#define set_config_field(reg, field, val) \ + do { \ + if (val != -1) { \ + reg &= ~CONFIG_##field(0xffffffff); \ + reg |= CONFIG_##field(val); \ + } \ + } while (0) + +void configure_async_emif(int cs, struct async_emif_config *cfg) +{ + unsigned long tmp; + + if (cfg->mode == ASYNC_EMIF_MODE_NAND) { + tmp = __raw_readl(ASYNC_EMIF_NAND_CONTROL); + tmp |= (1 << cs); + __raw_writel(tmp, ASYNC_EMIF_NAND_CONTROL); + + } else if (cfg->mode == ASYNC_EMIF_MODE_ONENAND) { + tmp = __raw_readl(ASYNC_EMIF_ONENAND_CONTROL); + tmp |= (1 << cs); + __raw_writel(tmp, ASYNC_EMIF_ONENAND_CONTROL); + } + + tmp = __raw_readl(ASYNC_EMIF_CONFIG(cs)); + + set_config_field(tmp, SELECT_STROBE, cfg->select_strobe); + set_config_field(tmp, EXTEND_WAIT, cfg->extend_wait); + set_config_field(tmp, WR_SETUP, cfg->wr_setup); + set_config_field(tmp, WR_STROBE, cfg->wr_strobe); + set_config_field(tmp, WR_HOLD, cfg->wr_hold); + set_config_field(tmp, RD_SETUP, cfg->rd_setup); + set_config_field(tmp, RD_STROBE, cfg->rd_strobe); + set_config_field(tmp, RD_HOLD, cfg->rd_hold); + set_config_field(tmp, TURN_AROUND, cfg->turn_around); + set_config_field(tmp, WIDTH, cfg->width); + + __raw_writel(tmp, ASYNC_EMIF_CONFIG(cs)); +} + +void init_async_emif(int num_cs, struct async_emif_config *config) +{ + int cs; + + clk_enable(TNETV107X_LPSC_AEMIF); + + for (cs = 0; cs < num_cs; cs++) + configure_async_emif(cs, config + cs); +} diff --git a/u-boot/arch/arm/cpu/arm1176/tnetv107x/clock.c b/u-boot/arch/arm/cpu/arm1176/tnetv107x/clock.c new file mode 100644 index 0000000..e26fec1 --- /dev/null +++ b/u-boot/arch/arm/cpu/arm1176/tnetv107x/clock.c @@ -0,0 +1,451 @@ +/* + * TNETV107X: Clock management APIs + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <common.h> +#include <asm-generic/errno.h> +#include <asm/io.h> +#include <asm/processor.h> +#include <asm/arch/clock.h> + +#define CLOCK_BASE TNETV107X_CLOCK_CONTROL_BASE +#define PSC_BASE TNETV107X_PSC_BASE + +#define BIT(x) (1 << (x)) + +#define MAX_PREDIV 64 +#define MAX_POSTDIV 8 +#define MAX_MULT 512 +#define MAX_DIV (MAX_PREDIV * MAX_POSTDIV) + +/* LPSC registers */ +#define PSC_PTCMD 0x120 +#define PSC_PTSTAT 0x128 +#define PSC_MDSTAT(n) (0x800 + (n) * 4) +#define PSC_MDCTL(n) (0xA00 + (n) * 4) + +#define PSC_MDCTL_LRSTZ BIT(8) + +#define psc_reg_read(reg) __raw_readl((u32 *)(PSC_BASE + (reg))) +#define psc_reg_write(reg, val) __raw_writel(val, (u32 *)(PSC_BASE + (reg))) + +/* SSPLL registers */ +struct sspll_regs { + u32 modes; + u32 postdiv; + u32 prediv; + u32 mult_factor; + u32 divider_range; + u32 bw_divider; + u32 spr_amount; + u32 spr_rate_div; + u32 diag; +}; + +/* SSPLL base addresses */ +static struct sspll_regs *sspll_regs[] = { + (struct sspll_regs *)(CLOCK_BASE + 0x040), + (struct sspll_regs *)(CLOCK_BASE + 0x080), + (struct sspll_regs *)(CLOCK_BASE + 0x0c0), +}; + +#define sspll_reg(pll, reg) (&(sspll_regs[pll]->reg)) +#define sspll_reg_read(pll, reg) __raw_readl(sspll_reg(pll, reg)) +#define sspll_reg_write(pll, reg, val) __raw_writel(val, sspll_reg(pll, reg)) + + +/* PLL Control Registers */ +struct pllctl_regs { + u32 ctl; /* 00 */ + u32 ocsel; /* 04 */ + u32 secctl; /* 08 */ + u32 __pad0; + u32 mult; /* 10 */ + u32 prediv; /* 14 */ + u32 div1; /* 18 */ + u32 div2; /* 1c */ + u32 div3; /* 20 */ + u32 oscdiv1; /* 24 */ + u32 postdiv; /* 28 */ + u32 bpdiv; /* 2c */ + u32 wakeup; /* 30 */ + u32 __pad1; + u32 cmd; /* 38 */ + u32 stat; /* 3c */ + u32 alnctl; /* 40 */ + u32 dchange; /* 44 */ + u32 cken; /* 48 */ + u32 ckstat; /* 4c */ + u32 systat; /* 50 */ + u32 ckctl; /* 54 */ + u32 __pad2[2]; + u32 div4; /* 60 */ + u32 div5; /* 64 */ + u32 div6; /* 68 */ + u32 div7; /* 6c */ + u32 div8; /* 70 */ +}; + +struct lpsc_map { + int pll, div; +}; + +static struct pllctl_regs *pllctl_regs[] = { + (struct pllctl_regs *)(CLOCK_BASE + 0x700), + (struct pllctl_regs *)(CLOCK_BASE + 0x300), + (struct pllctl_regs *)(CLOCK_BASE + 0x500), +}; + +#define pllctl_reg(pll, reg) (&(pllctl_regs[pll]->reg)) +#define pllctl_reg_read(pll, reg) __raw_readl(pllctl_reg(pll, reg)) +#define pllctl_reg_write(pll, reg, val) __raw_writel(val, pllctl_reg(pll, reg)) + +#define pllctl_reg_rmw(pll, reg, mask, val) \ + pllctl_reg_write(pll, reg, \ + (pllctl_reg_read(pll, reg) & ~(mask)) | val) + +#define pllctl_reg_setbits(pll, reg, mask) \ + pllctl_reg_rmw(pll, reg, 0, mask) + +#define pllctl_reg_clrbits(pll, reg, mask) \ + pllctl_reg_rmw(pll, reg, mask, 0) + +/* PLLCTL Bits */ +#define PLLCTL_CLKMODE BIT(8) +#define PLLCTL_PLLSELB BIT(7) +#define PLLCTL_PLLENSRC BIT(5) +#define PLLCTL_PLLDIS BIT(4) +#define PLLCTL_PLLRST BIT(3) +#define PLLCTL_PLLPWRDN BIT(1) +#define PLLCTL_PLLEN BIT(0) + +#define PLLDIV_ENABLE BIT(15) + +static int pll_div_offset[] = { +#define div_offset(reg) offsetof(struct pllctl_regs, reg) + div_offset(div1), div_offset(div2), div_offset(div3), + div_offset(div4), div_offset(div5), div_offset(div6), + div_offset(div7), div_offset(div8), +}; + +static unsigned long pll_bypass_mask[] = { 1, 4, 2 }; +static unsigned long pll_div_mask[] = { 0x01ff, 0x00ff, 0x00ff }; + +/* Mappings from PLL+DIV to subsystem clocks */ +#define sys_arm1176_clk {SYS_PLL, 0} +#define sys_dsp_clk {SYS_PLL, 1} +#define sys_ddr_clk {SYS_PLL, 2} +#define sys_full_clk {SYS_PLL, 3} +#define sys_lcd_clk {SYS_PLL, 4} +#define sys_vlynq_ref_clk {SYS_PLL, 5} +#define sys_tsc_clk {SYS_PLL, 6} +#define sys_half_clk {SYS_PLL, 7} + +#define eth_clk_5 {ETH_PLL, 0} +#define eth_clk_50 {ETH_PLL, 1} +#define eth_clk_125 {ETH_PLL, 2} +#define eth_clk_250 {ETH_PLL, 3} +#define eth_clk_25 {ETH_PLL, 4} + +#define tdm_clk {TDM_PLL, 0} +#define tdm_extra_clk {TDM_PLL, 1} +#define tdm1_clk {TDM_PLL, 2} + +/* Optimization barrier */ +#define barrier() \ + __asm__ __volatile__("mov r0, r0\n" : : : "memory"); + +static const struct lpsc_map lpsc_clk_map[] = { + [TNETV107X_LPSC_ARM] = sys_arm1176_clk, + [TNETV107X_LPSC_GEM] = sys_dsp_clk, + [TNETV107X_LPSC_DDR2_PHY] = sys_ddr_clk, + [TNETV107X_LPSC_TPCC] = sys_full_clk, + [TNETV107X_LPSC_TPTC0] = sys_full_clk, + [TNETV107X_LPSC_TPTC1] = sys_full_clk, + [TNETV107X_LPSC_RAM] = sys_full_clk, + [TNETV107X_LPSC_MBX_LITE] = sys_arm1176_clk, + [TNETV107X_LPSC_LCD] = sys_lcd_clk, + [TNETV107X_LPSC_ETHSS] = eth_clk_125, + [TNETV107X_LPSC_AEMIF] = sys_full_clk, + [TNETV107X_LPSC_CHIP_CFG] = sys_half_clk, + [TNETV107X_LPSC_TSC] = sys_tsc_clk, + [TNETV107X_LPSC_ROM] = sys_half_clk, + [TNETV107X_LPSC_UART2] = sys_half_clk, + [TNETV107X_LPSC_PKTSEC] = sys_half_clk, + [TNETV107X_LPSC_SECCTL] = sys_half_clk, + [TNETV107X_LPSC_KEYMGR] = sys_half_clk, + [TNETV107X_LPSC_KEYPAD] = sys_half_clk, + [TNETV107X_LPSC_GPIO] = sys_half_clk, + [TNETV107X_LPSC_MDIO] = sys_half_clk, + [TNETV107X_LPSC_SDIO0] = sys_half_clk, + [TNETV107X_LPSC_UART0] = sys_half_clk, + [TNETV107X_LPSC_UART1] = sys_half_clk, + [TNETV107X_LPSC_TIMER0] = sys_half_clk, + [TNETV107X_LPSC_TIMER1] = sys_half_clk, + [TNETV107X_LPSC_WDT_ARM] = sys_half_clk, + [TNETV107X_LPSC_WDT_DSP] = sys_half_clk, + [TNETV107X_LPSC_SSP] = sys_half_clk, + [TNETV107X_LPSC_TDM0] = tdm_clk, + [TNETV107X_LPSC_VLYNQ] = sys_vlynq_ref_clk, + [TNETV107X_LPSC_MCDMA] = sys_half_clk, + [TNETV107X_LPSC_USB0] = sys_half_clk, + [TNETV107X_LPSC_TDM1] = tdm1_clk, + [TNETV107X_LPSC_DEBUGSS] = sys_half_clk, + [TNETV107X_LPSC_ETHSS_RGMII] = eth_clk_250, + [TNETV107X_LPSC_SYSTEM] = sys_half_clk, + [TNETV107X_LPSC_IMCOP] = sys_dsp_clk, + [TNETV107X_LPSC_SPARE] = sys_half_clk, + [TNETV107X_LPSC_SDIO1] = sys_half_clk, + [TNETV107X_LPSC_USB1] = sys_half_clk, + [TNETV107X_LPSC_USBSS] = sys_half_clk, + [TNETV107X_LPSC_DDR2_EMIF1_VRST] = sys_ddr_clk, + [TNETV107X_LPSC_DDR2_EMIF2_VCTL_RST] = sys_ddr_clk, +}; + +static const unsigned long pll_ext_freq[] = { + [SYS_PLL] = CONFIG_PLL_SYS_EXT_FREQ, + [ETH_PLL] = CONFIG_PLL_ETH_EXT_FREQ, + [TDM_PLL] = CONFIG_PLL_TDM_EXT_FREQ, +}; + +static unsigned long pll_freq_get(int pll) +{ + unsigned long mult = 1, prediv = 1, postdiv = 1; + unsigned long ref = CONFIG_SYS_INT_OSC_FREQ; + unsigned long ret; + u32 bypass; + + bypass = __raw_readl((u32 *)(CLOCK_BASE)); + if (!(bypass & pll_bypass_mask[pll])) { + mult = sspll_reg_read(pll, mult_factor); + prediv = sspll_reg_read(pll, prediv) + 1; + postdiv = sspll_reg_read(pll, postdiv) + 1; + } + + if (pllctl_reg_read(pll, ctl) & PLLCTL_CLKMODE) + ref = pll_ext_freq[pll]; + + if (!(pllctl_reg_read(pll, ctl) & PLLCTL_PLLEN)) + return ref; + + ret = (unsigned long)(ref + ((unsigned long long)ref * mult) / 256); + ret /= (prediv * postdiv); + + return ret; +} + +static unsigned long __pll_div_freq_get(int pll, unsigned int fpll, + int div) +{ + int divider = 1; + unsigned long divreg; + + divreg = __raw_readl((void *)pllctl_regs[pll] + pll_div_offset[div]); + + if (divreg & PLLDIV_ENABLE) + divider = (divreg & pll_div_mask[pll]) + 1; + + return fpll / divider; +} + +static unsigned long pll_div_freq_get(int pll, int div) +{ + unsigned int fpll = pll_freq_get(pll); + + return __pll_div_freq_get(pll, fpll, div); +} + +static void __pll_div_freq_set(int pll, unsigned int fpll, int div, + unsigned long hz) +{ + int divider = (fpll / hz - 1); + + divider &= pll_div_mask[pll]; + divider |= PLLDIV_ENABLE; + + __raw_writel(divider, (void *)pllctl_regs[pll] + pll_div_offset[div]); + pllctl_reg_setbits(pll, alnctl, (1 << div)); + pllctl_reg_setbits(pll, dchange, (1 << div)); +} + +static unsigned long pll_div_freq_set(int pll, int div, unsigned long hz) +{ + unsigned int fpll = pll_freq_get(pll); + + __pll_div_freq_set(pll, fpll, div, hz); + + pllctl_reg_write(pll, cmd, 1); + + /* Wait until new divider takes effect */ + while (pllctl_reg_read(pll, stat) & 0x01); + + return __pll_div_freq_get(pll, fpll, div); +} + +unsigned long clk_get_rate(unsigned int clk) +{ + return pll_div_freq_get(lpsc_clk_map[clk].pll, lpsc_clk_map[clk].div); +} + +unsigned long clk_round_rate(unsigned int clk, unsigned long hz) +{ + unsigned long fpll, divider, pll; + + pll = lpsc_clk_map[clk].pll; + fpll = pll_freq_get(pll); + divider = (fpll / hz - 1); + divider &= pll_div_mask[pll]; + + return fpll / (divider + 1); +} + +int clk_set_rate(unsigned int clk, unsigned long _hz) +{ + unsigned long hz; + + hz = clk_round_rate(clk, _hz); + if (hz != _hz) + return -EINVAL; /* Cannot set to target freq */ + + pll_div_freq_set(lpsc_clk_map[clk].pll, lpsc_clk_map[clk].div, hz); + return 0; +} + +void lpsc_control(int mod, unsigned long state, int lrstz) +{ + u32 mdctl; + + mdctl = psc_reg_read(PSC_MDCTL(mod)); + mdctl &= ~0x1f; + mdctl |= state; + + if (lrstz == 0) + mdctl &= ~PSC_MDCTL_LRSTZ; + else if (lrstz == 1) + mdctl |= PSC_MDCTL_LRSTZ; + + psc_reg_write(PSC_MDCTL(mod), mdctl); + + psc_reg_write(PSC_PTCMD, 1); + + /* wait for power domain transition to end */ + while (psc_reg_read(PSC_PTSTAT) & 1); + + /* Wait for module state change */ + while ((psc_reg_read(PSC_MDSTAT(mod)) & 0x1f) != state); +} + +int lpsc_status(unsigned int id) +{ + return psc_reg_read(PSC_MDSTAT(id)) & 0x1f; +} + +static void init_pll(const struct pll_init_data *data) +{ + unsigned long fpll; + unsigned long best_pre = 0, best_post = 0, best_mult = 0; + unsigned long div, prediv, postdiv, mult; + unsigned long delta, actual; + long best_delta = -1; + int i; + u32 tmp; + + if (data->pll == SYS_PLL) + return; /* cannot reconfigure system pll on the fly */ + + tmp = pllctl_reg_read(data->pll, ctl); + if (data->internal_osc) { + tmp &= ~PLLCTL_CLKMODE; + fpll = CONFIG_SYS_INT_OSC_FREQ; + } else { + tmp |= PLLCTL_CLKMODE; + fpll = pll_ext_freq[data->pll]; + } + pllctl_reg_write(data->pll, ctl, tmp); + + mult = data->pll_freq / fpll; + for (mult = MAX(mult, 1); mult <= MAX_MULT; mult++) { + div = (fpll * mult) / data->pll_freq; + if (div < 1 || div > MAX_DIV) + continue; + + for (postdiv = 1; postdiv <= min(div, MAX_POSTDIV); postdiv++) { + prediv = div / postdiv; + if (prediv < 1 || prediv > MAX_PREDIV) + continue; + + actual = (fpll / prediv) * (mult / postdiv); + delta = (actual - data->pll_freq); + if (delta < 0) + delta = -delta; + if ((delta < best_delta) || (best_delta == -1)) { + best_delta = delta; + best_mult = mult; + best_pre = prediv; + best_post = postdiv; + if (delta == 0) + goto done; + } + } + } +done: + + if (best_delta == -1) { + printf("pll cannot derive %lu from %lu\n", + data->pll_freq, fpll); + return; + } + + fpll = fpll * best_mult; + fpll /= best_pre * best_post; + + pllctl_reg_clrbits(data->pll, ctl, PLLCTL_PLLENSRC); + pllctl_reg_clrbits(data->pll, ctl, PLLCTL_PLLEN); + + pllctl_reg_setbits(data->pll, ctl, PLLCTL_PLLRST); + + pllctl_reg_clrbits(data->pll, ctl, PLLCTL_PLLPWRDN); + pllctl_reg_clrbits(data->pll, ctl, PLLCTL_PLLDIS); + + sspll_reg_write(data->pll, mult_factor, (best_mult - 1) << 8); + sspll_reg_write(data->pll, prediv, best_pre - 1); + sspll_reg_write(data->pll, postdiv, best_post - 1); + + for (i = 0; i < 10; i++) + if (data->div_freq[i]) + __pll_div_freq_set(data->pll, fpll, i, + data->div_freq[i]); + + pllctl_reg_write(data->pll, cmd, 1); + + /* Wait until pll "go" operation completes */ + while (pllctl_reg_read(data->pll, stat) & 0x01); + + pllctl_reg_clrbits(data->pll, ctl, PLLCTL_PLLRST); + pllctl_reg_setbits(data->pll, ctl, PLLCTL_PLLEN); +} + +void init_plls(int num_pll, struct pll_init_data *config) +{ + int i; + + for (i = 0; i < num_pll; i++) + init_pll(&config[i]); +} diff --git a/u-boot/arch/arm/cpu/arm1176/tnetv107x/init.c b/u-boot/arch/arm/cpu/arm1176/tnetv107x/init.c new file mode 100644 index 0000000..ce3a025 --- /dev/null +++ b/u-boot/arch/arm/cpu/arm1176/tnetv107x/init.c @@ -0,0 +1,37 @@ +/* + * TNETV107X: Architecture initialization + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <common.h> +#include <asm/io.h> + +void chip_configuration_unlock(void) +{ + __raw_writel(TNETV107X_KICK0_MAGIC, TNETV107X_KICK0); + __raw_writel(TNETV107X_KICK1_MAGIC, TNETV107X_KICK1); +} + +int arch_cpu_init(void) +{ + icache_enable(); + chip_configuration_unlock(); + + return 0; +} diff --git a/u-boot/arch/arm/cpu/arm1176/tnetv107x/lowlevel_init.S b/u-boot/arch/arm/cpu/arm1176/tnetv107x/lowlevel_init.S new file mode 100644 index 0000000..3ee32ef --- /dev/null +++ b/u-boot/arch/arm/cpu/arm1176/tnetv107x/lowlevel_init.S @@ -0,0 +1,25 @@ +/* + * TNETV107X: Low-level pre-relocation initialization + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +.globl lowlevel_init +lowlevel_init: + /* nothing for now, maybe needed for more exotic boot modes */ + mov pc, lr diff --git a/u-boot/arch/arm/cpu/arm1176/tnetv107x/mux.c b/u-boot/arch/arm/cpu/arm1176/tnetv107x/mux.c new file mode 100644 index 0000000..ccc5314 --- /dev/null +++ b/u-boot/arch/arm/cpu/arm1176/tnetv107x/mux.c @@ -0,0 +1,334 @@ +/* + * TNETV107X: Pinmux configuration + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/clock.h> +#include <asm/arch/mux.h> + +#define MUX_MODE_1 0x00 +#define MUX_MODE_2 0x04 +#define MUX_MODE_3 0x0c +#define MUX_MODE_4 0x1c + +#define MUX_DEBUG 0 + +static const struct pin_config pin_table[] = { + /* reg shift mode */ + TNETV107X_MUX_CFG(0, 0, MUX_MODE_1), + TNETV107X_MUX_CFG(0, 0, MUX_MODE_2), + TNETV107X_MUX_CFG(0, 5, MUX_MODE_1), + TNETV107X_MUX_CFG(0, 5, MUX_MODE_2), + TNETV107X_MUX_CFG(0, 10, MUX_MODE_1), + TNETV107X_MUX_CFG(0, 10, MUX_MODE_2), + TNETV107X_MUX_CFG(0, 15, MUX_MODE_1), + TNETV107X_MUX_CFG(0, 15, MUX_MODE_2), + TNETV107X_MUX_CFG(0, 20, MUX_MODE_1), + TNETV107X_MUX_CFG(0, 20, MUX_MODE_2), + TNETV107X_MUX_CFG(0, 25, MUX_MODE_1), + TNETV107X_MUX_CFG(0, 25, MUX_MODE_2), + TNETV107X_MUX_CFG(1, 0, MUX_MODE_1), + TNETV107X_MUX_CFG(1, 0, MUX_MODE_2), + TNETV107X_MUX_CFG(1, 5, MUX_MODE_1), + TNETV107X_MUX_CFG(1, 5, MUX_MODE_2), + TNETV107X_MUX_CFG(1, 10, MUX_MODE_1), + TNETV107X_MUX_CFG(1, 10, MUX_MODE_2), + TNETV107X_MUX_CFG(1, 15, MUX_MODE_1), + TNETV107X_MUX_CFG(1, 15, MUX_MODE_2), + TNETV107X_MUX_CFG(1, 20, MUX_MODE_1), + TNETV107X_MUX_CFG(1, 20, MUX_MODE_2), + TNETV107X_MUX_CFG(1, 25, MUX_MODE_1), + TNETV107X_MUX_CFG(1, 25, MUX_MODE_2), + TNETV107X_MUX_CFG(2, 0, MUX_MODE_1), + TNETV107X_MUX_CFG(2, 0, MUX_MODE_2), + TNETV107X_MUX_CFG(2, 5, MUX_MODE_1), + TNETV107X_MUX_CFG(2, 5, MUX_MODE_2), + TNETV107X_MUX_CFG(2, 10, MUX_MODE_1), + TNETV107X_MUX_CFG(2, 10, MUX_MODE_2), + TNETV107X_MUX_CFG(2, 15, MUX_MODE_1), + TNETV107X_MUX_CFG(2, 15, MUX_MODE_2), + TNETV107X_MUX_CFG(2, 20, MUX_MODE_1), + TNETV107X_MUX_CFG(2, 20, MUX_MODE_2), + TNETV107X_MUX_CFG(2, 25, MUX_MODE_1), + TNETV107X_MUX_CFG(2, 25, MUX_MODE_2), + TNETV107X_MUX_CFG(3, 0, MUX_MODE_1), + TNETV107X_MUX_CFG(3, 0, MUX_MODE_2), + TNETV107X_MUX_CFG(3, 0, MUX_MODE_4), + TNETV107X_MUX_CFG(3, 5, MUX_MODE_1), + TNETV107X_MUX_CFG(3, 5, MUX_MODE_2), + TNETV107X_MUX_CFG(3, 5, MUX_MODE_4), + TNETV107X_MUX_CFG(3, 10, MUX_MODE_1), + TNETV107X_MUX_CFG(3, 10, MUX_MODE_2), + TNETV107X_MUX_CFG(3, 10, MUX_MODE_4), + TNETV107X_MUX_CFG(3, 15, MUX_MODE_1), + TNETV107X_MUX_CFG(3, 15, MUX_MODE_2), + TNETV107X_MUX_CFG(3, 15, MUX_MODE_4), + TNETV107X_MUX_CFG(3, 20, MUX_MODE_1), + TNETV107X_MUX_CFG(3, 20, MUX_MODE_2), + TNETV107X_MUX_CFG(3, 20, MUX_MODE_4), + TNETV107X_MUX_CFG(3, 25, MUX_MODE_1), + TNETV107X_MUX_CFG(3, 25, MUX_MODE_2), + TNETV107X_MUX_CFG(3, 25, MUX_MODE_4), + TNETV107X_MUX_CFG(4, 0, MUX_MODE_1), + TNETV107X_MUX_CFG(4, 0, MUX_MODE_2), + TNETV107X_MUX_CFG(4, 0, MUX_MODE_4), + TNETV107X_MUX_CFG(4, 5, MUX_MODE_1), + TNETV107X_MUX_CFG(4, 10, MUX_MODE_1), + TNETV107X_MUX_CFG(4, 15, MUX_MODE_1), + TNETV107X_MUX_CFG(4, 15, MUX_MODE_4), + TNETV107X_MUX_CFG(4, 20, MUX_MODE_1), + TNETV107X_MUX_CFG(4, 20, MUX_MODE_3), + TNETV107X_MUX_CFG(4, 25, MUX_MODE_1), + TNETV107X_MUX_CFG(4, 25, MUX_MODE_4), + TNETV107X_MUX_CFG(5, 0, MUX_MODE_1), + TNETV107X_MUX_CFG(5, 0, MUX_MODE_4), + TNETV107X_MUX_CFG(5, 5, MUX_MODE_1), + TNETV107X_MUX_CFG(5, 5, MUX_MODE_4), + TNETV107X_MUX_CFG(5, 10, MUX_MODE_1), + TNETV107X_MUX_CFG(5, 10, MUX_MODE_4), + TNETV107X_MUX_CFG(5, 15, MUX_MODE_1), + TNETV107X_MUX_CFG(5, 15, MUX_MODE_4), + TNETV107X_MUX_CFG(5, 20, MUX_MODE_1), + TNETV107X_MUX_CFG(5, 20, MUX_MODE_4), + TNETV107X_MUX_CFG(5, 25, MUX_MODE_1), + TNETV107X_MUX_CFG(5, 25, MUX_MODE_4), + TNETV107X_MUX_CFG(6, 0, MUX_MODE_1), + TNETV107X_MUX_CFG(6, 0, MUX_MODE_4), + TNETV107X_MUX_CFG(6, 5, MUX_MODE_1), + TNETV107X_MUX_CFG(6, 5, MUX_MODE_4), + TNETV107X_MUX_CFG(6, 10, MUX_MODE_1), + TNETV107X_MUX_CFG(6, 10, MUX_MODE_4), + TNETV107X_MUX_CFG(6, 15, MUX_MODE_1), + TNETV107X_MUX_CFG(6, 15, MUX_MODE_4), + TNETV107X_MUX_CFG(6, 20, MUX_MODE_1), + TNETV107X_MUX_CFG(6, 20, MUX_MODE_4), + TNETV107X_MUX_CFG(6, 25, MUX_MODE_1), + TNETV107X_MUX_CFG(6, 25, MUX_MODE_4), + TNETV107X_MUX_CFG(7, 0, MUX_MODE_1), + TNETV107X_MUX_CFG(7, 0, MUX_MODE_4), + TNETV107X_MUX_CFG(7, 5, MUX_MODE_1), + TNETV107X_MUX_CFG(7, 5, MUX_MODE_4), + TNETV107X_MUX_CFG(7, 10, MUX_MODE_1), + TNETV107X_MUX_CFG(7, 10, MUX_MODE_4), + TNETV107X_MUX_CFG(7, 15, MUX_MODE_1), + TNETV107X_MUX_CFG(7, 15, MUX_MODE_2), + TNETV107X_MUX_CFG(7, 20, MUX_MODE_1), + TNETV107X_MUX_CFG(7, 20, MUX_MODE_2), + TNETV107X_MUX_CFG(7, 25, MUX_MODE_1), + TNETV107X_MUX_CFG(7, 25, MUX_MODE_2), + TNETV107X_MUX_CFG(8, 0, MUX_MODE_1), + TNETV107X_MUX_CFG(8, 0, MUX_MODE_2), + TNETV107X_MUX_CFG(8, 5, MUX_MODE_1), + TNETV107X_MUX_CFG(8, 5, MUX_MODE_2), + TNETV107X_MUX_CFG(8, 5, MUX_MODE_4), + TNETV107X_MUX_CFG(8, 10, MUX_MODE_1), + TNETV107X_MUX_CFG(8, 10, MUX_MODE_2), + TNETV107X_MUX_CFG(9, 0, MUX_MODE_1), + TNETV107X_MUX_CFG(9, 0, MUX_MODE_2), + TNETV107X_MUX_CFG(9, 0, MUX_MODE_4), + TNETV107X_MUX_CFG(9, 5, MUX_MODE_1), + TNETV107X_MUX_CFG(9, 5, MUX_MODE_2), + TNETV107X_MUX_CFG(9, 5, MUX_MODE_4), + TNETV107X_MUX_CFG(9, 10, MUX_MODE_1), + TNETV107X_MUX_CFG(9, 10, MUX_MODE_2), + TNETV107X_MUX_CFG(9, 10, MUX_MODE_4), + TNETV107X_MUX_CFG(9, 15, MUX_MODE_1), + TNETV107X_MUX_CFG(9, 15, MUX_MODE_2), + TNETV107X_MUX_CFG(9, 15, MUX_MODE_4), + TNETV107X_MUX_CFG(9, 20, MUX_MODE_1), + TNETV107X_MUX_CFG(9, 20, MUX_MODE_2), + TNETV107X_MUX_CFG(9, 20, MUX_MODE_4), + TNETV107X_MUX_CFG(10, 0, MUX_MODE_1), + TNETV107X_MUX_CFG(10, 0, MUX_MODE_2), + TNETV107X_MUX_CFG(10, 5, MUX_MODE_1), + TNETV107X_MUX_CFG(10, 5, MUX_MODE_2), + TNETV107X_MUX_CFG(10, 10, MUX_MODE_1), + TNETV107X_MUX_CFG(10, 10, MUX_MODE_2), + TNETV107X_MUX_CFG(10, 15, MUX_MODE_1), + TNETV107X_MUX_CFG(10, 15, MUX_MODE_2), + TNETV107X_MUX_CFG(10, 20, MUX_MODE_1), + TNETV107X_MUX_CFG(10, 20, MUX_MODE_2), + TNETV107X_MUX_CFG(10, 25, MUX_MODE_1), + TNETV107X_MUX_CFG(10, 25, MUX_MODE_2), + TNETV107X_MUX_CFG(11, 0, MUX_MODE_1), + TNETV107X_MUX_CFG(11, 5, MUX_MODE_1), + TNETV107X_MUX_CFG(12, 0, MUX_MODE_1), + TNETV107X_MUX_CFG(12, 5, MUX_MODE_1), + TNETV107X_MUX_CFG(12, 10, MUX_MODE_1), + TNETV107X_MUX_CFG(12, 15, MUX_MODE_1), + TNETV107X_MUX_CFG(12, 20, MUX_MODE_1), + TNETV107X_MUX_CFG(12, 25, MUX_MODE_1), + TNETV107X_MUX_CFG(13, 0, MUX_MODE_1), + TNETV107X_MUX_CFG(13, 5, MUX_MODE_1), + TNETV107X_MUX_CFG(13, 10, MUX_MODE_1), + TNETV107X_MUX_CFG(13, 15, MUX_MODE_1), + TNETV107X_MUX_CFG(14, 0, MUX_MODE_1), + TNETV107X_MUX_CFG(14, 5, MUX_MODE_1), + TNETV107X_MUX_CFG(14, 10, MUX_MODE_1), + TNETV107X_MUX_CFG(14, 15, MUX_MODE_1), + TNETV107X_MUX_CFG(14, 20, MUX_MODE_1), + TNETV107X_MUX_CFG(14, 25, MUX_MODE_1), + TNETV107X_MUX_CFG(15, 0, MUX_MODE_1), + TNETV107X_MUX_CFG(15, 0, MUX_MODE_2), + TNETV107X_MUX_CFG(15, 5, MUX_MODE_1), + TNETV107X_MUX_CFG(15, 5, MUX_MODE_2), + TNETV107X_MUX_CFG(15, 10, MUX_MODE_1), + TNETV107X_MUX_CFG(15, 15, MUX_MODE_1), + TNETV107X_MUX_CFG(15, 20, MUX_MODE_1), + TNETV107X_MUX_CFG(15, 25, MUX_MODE_1), + TNETV107X_MUX_CFG(16, 0, MUX_MODE_1), + TNETV107X_MUX_CFG(16, 5, MUX_MODE_1), + TNETV107X_MUX_CFG(16, 10, MUX_MODE_1), + TNETV107X_MUX_CFG(16, 10, MUX_MODE_2), + TNETV107X_MUX_CFG(16, 10, MUX_MODE_3), + TNETV107X_MUX_CFG(16, 15, MUX_MODE_1), + TNETV107X_MUX_CFG(16, 15, MUX_MODE_2), + TNETV107X_MUX_CFG(17, 0, MUX_MODE_1), + TNETV107X_MUX_CFG(17, 0, MUX_MODE_2), + TNETV107X_MUX_CFG(17, 0, MUX_MODE_3), + TNETV107X_MUX_CFG(17, 5, MUX_MODE_1), + TNETV107X_MUX_CFG(17, 5, MUX_MODE_2), + TNETV107X_MUX_CFG(17, 5, MUX_MODE_3), + TNETV107X_MUX_CFG(17, 10, MUX_MODE_1), + TNETV107X_MUX_CFG(17, 10, MUX_MODE_2), + TNETV107X_MUX_CFG(17, 10, MUX_MODE_3), + TNETV107X_MUX_CFG(17, 15, MUX_MODE_1), + TNETV107X_MUX_CFG(17, 15, MUX_MODE_2), + TNETV107X_MUX_CFG(17, 15, MUX_MODE_3), + TNETV107X_MUX_CFG(18, 0, MUX_MODE_1), + TNETV107X_MUX_CFG(18, 0, MUX_MODE_2), + TNETV107X_MUX_CFG(18, 0, MUX_MODE_3), + TNETV107X_MUX_CFG(18, 5, MUX_MODE_1), + TNETV107X_MUX_CFG(18, 5, MUX_MODE_2), + TNETV107X_MUX_CFG(18, 5, MUX_MODE_3), + TNETV107X_MUX_CFG(18, 10, MUX_MODE_1), + TNETV107X_MUX_CFG(18, 10, MUX_MODE_2), + TNETV107X_MUX_CFG(18, 10, MUX_MODE_3), + TNETV107X_MUX_CFG(18, 15, MUX_MODE_1), + TNETV107X_MUX_CFG(18, 15, MUX_MODE_2), + TNETV107X_MUX_CFG(18, 15, MUX_MODE_3), + TNETV107X_MUX_CFG(19, 0, MUX_MODE_1), + TNETV107X_MUX_CFG(19, 5, MUX_MODE_1), + TNETV107X_MUX_CFG(19, 10, MUX_MODE_1), + TNETV107X_MUX_CFG(19, 15, MUX_MODE_1), + TNETV107X_MUX_CFG(19, 20, MUX_MODE_1), + TNETV107X_MUX_CFG(19, 25, MUX_MODE_1), + TNETV107X_MUX_CFG(20, 0, MUX_MODE_1), + TNETV107X_MUX_CFG(20, 5, MUX_MODE_1), + TNETV107X_MUX_CFG(20, 10, MUX_MODE_1), + TNETV107X_MUX_CFG(20, 15, MUX_MODE_1), + TNETV107X_MUX_CFG(20, 15, MUX_MODE_3), + TNETV107X_MUX_CFG(20, 20, MUX_MODE_1), + TNETV107X_MUX_CFG(20, 25, MUX_MODE_1), + TNETV107X_MUX_CFG(21, 0, MUX_MODE_1), + TNETV107X_MUX_CFG(21, 5, MUX_MODE_1), + TNETV107X_MUX_CFG(21, 10, MUX_MODE_1), + TNETV107X_MUX_CFG(21, 15, MUX_MODE_1), + TNETV107X_MUX_CFG(21, 20, MUX_MODE_1), + TNETV107X_MUX_CFG(21, 25, MUX_MODE_1), + TNETV107X_MUX_CFG(22, 0, MUX_MODE_1), + TNETV107X_MUX_CFG(22, 5, MUX_MODE_1), + TNETV107X_MUX_CFG(22, 5, MUX_MODE_3), + TNETV107X_MUX_CFG(22, 10, MUX_MODE_1), + TNETV107X_MUX_CFG(22, 10, MUX_MODE_3), + TNETV107X_MUX_CFG(22, 15, MUX_MODE_1), + TNETV107X_MUX_CFG(22, 15, MUX_MODE_2), + TNETV107X_MUX_CFG(22, 15, MUX_MODE_3), + TNETV107X_MUX_CFG(22, 20, MUX_MODE_1), + TNETV107X_MUX_CFG(22, 20, MUX_MODE_3), + TNETV107X_MUX_CFG(22, 25, MUX_MODE_1), + TNETV107X_MUX_CFG(22, 25, MUX_MODE_3), + TNETV107X_MUX_CFG(23, 0, MUX_MODE_1), + TNETV107X_MUX_CFG(23, 0, MUX_MODE_3), + TNETV107X_MUX_CFG(23, 5, MUX_MODE_1), + TNETV107X_MUX_CFG(23, 5, MUX_MODE_3), + TNETV107X_MUX_CFG(23, 10, MUX_MODE_1), + TNETV107X_MUX_CFG(23, 10, MUX_MODE_3), + TNETV107X_MUX_CFG(24, 0, MUX_MODE_1), + TNETV107X_MUX_CFG(24, 0, MUX_MODE_2), + TNETV107X_MUX_CFG(24, 5, MUX_MODE_1), + TNETV107X_MUX_CFG(24, 5, MUX_MODE_2), + TNETV107X_MUX_CFG(24, 10, MUX_MODE_1), + TNETV107X_MUX_CFG(24, 10, MUX_MODE_2), + TNETV107X_MUX_CFG(24, 10, MUX_MODE_3), + TNETV107X_MUX_CFG(24, 15, MUX_MODE_1), + TNETV107X_MUX_CFG(24, 15, MUX_MODE_2), + TNETV107X_MUX_CFG(24, 15, MUX_MODE_3), + TNETV107X_MUX_CFG(24, 20, MUX_MODE_1), + TNETV107X_MUX_CFG(24, 20, MUX_MODE_2), + TNETV107X_MUX_CFG(24, 25, MUX_MODE_1), + TNETV107X_MUX_CFG(24, 25, MUX_MODE_2), + TNETV107X_MUX_CFG(25, 0, MUX_MODE_1), + TNETV107X_MUX_CFG(25, 0, MUX_MODE_2), + TNETV107X_MUX_CFG(25, 0, MUX_MODE_3), + TNETV107X_MUX_CFG(25, 5, MUX_MODE_1), + TNETV107X_MUX_CFG(25, 5, MUX_MODE_2), + TNETV107X_MUX_CFG(25, 5, MUX_MODE_3), + TNETV107X_MUX_CFG(25, 10, MUX_MODE_1), + TNETV107X_MUX_CFG(25, 10, MUX_MODE_2), + TNETV107X_MUX_CFG(25, 10, MUX_MODE_3), + TNETV107X_MUX_CFG(25, 15, MUX_MODE_1), + TNETV107X_MUX_CFG(25, 15, MUX_MODE_2), + TNETV107X_MUX_CFG(25, 15, MUX_MODE_3), + TNETV107X_MUX_CFG(25, 15, MUX_MODE_4), + TNETV107X_MUX_CFG(26, 0, MUX_MODE_1), + TNETV107X_MUX_CFG(26, 5, MUX_MODE_1), + TNETV107X_MUX_CFG(26, 10, MUX_MODE_1), + TNETV107X_MUX_CFG(26, 10, MUX_MODE_2), + TNETV107X_MUX_CFG(26, 15, MUX_MODE_1), + TNETV107X_MUX_CFG(26, 15, MUX_MODE_2), + TNETV107X_MUX_CFG(26, 20, MUX_MODE_1), + TNETV107X_MUX_CFG(26, 20, MUX_MODE_2), + TNETV107X_MUX_CFG(26, 25, MUX_MODE_1), + TNETV107X_MUX_CFG(26, 25, MUX_MODE_2), +}; + +const int pin_table_size = sizeof(pin_table) / sizeof(pin_table[0]); + +int mux_select_pin(short index) +{ + const struct pin_config *cfg; + unsigned long mask, mode, reg; + + if (index >= pin_table_size) + return 0; + + cfg = &pin_table[index]; + + mask = 0x1f << cfg->mask_offset; + mode = cfg->mode << cfg->mask_offset; + + reg = __raw_readl(TNETV107X_PINMUX(cfg->reg_index)); + reg = (reg & ~mask) | mode; + __raw_writel(reg, TNETV107X_PINMUX(cfg->reg_index)); + + return 1; +} + +int mux_select_pins(const short *pins) +{ + int i, ret = 1; + + for (i = 0; pins[i] >= 0; i++) + ret &= mux_select_pin(pins[i]); + + return ret; +} diff --git a/u-boot/arch/arm/cpu/arm1176/tnetv107x/timer.c b/u-boot/arch/arm/cpu/arm1176/tnetv107x/timer.c new file mode 100644 index 0000000..a7a400d --- /dev/null +++ b/u-boot/arch/arm/cpu/arm1176/tnetv107x/timer.c @@ -0,0 +1,122 @@ +/* + * TNETV107X: Timer implementation + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/clock.h> + +struct timer_regs { + u_int32_t pid12; + u_int32_t pad[3]; + u_int32_t tim12; + u_int32_t tim34; + u_int32_t prd12; + u_int32_t prd34; + u_int32_t tcr; + u_int32_t tgcr; + u_int32_t wdtcr; +}; + +#define regs ((struct timer_regs *)CONFIG_SYS_TIMERBASE) + +#define TIMER_LOAD_VAL (CONFIG_SYS_HZ_CLOCK / CONFIG_SYS_HZ) +#define TIM_CLK_DIV 16 + +static ulong timestamp; +static ulong lastinc; + +int timer_init(void) +{ + clk_enable(TNETV107X_LPSC_TIMER0); + + lastinc = timestamp = 0; + + /* We are using timer34 in unchained 32-bit mode, full speed */ + __raw_writel(0x0, ®s->tcr); + __raw_writel(0x0, ®s->tgcr); + __raw_writel(0x06 | ((TIM_CLK_DIV - 1) << 8), ®s->tgcr); + __raw_writel(0x0, ®s->tim34); + __raw_writel(TIMER_LOAD_VAL, ®s->prd34); + __raw_writel(2 << 22, ®s->tcr); + + return 0; +} + +void reset_timer(void) +{ + lastinc = timestamp = 0; + + __raw_writel(0, ®s->tcr); + __raw_writel(0, ®s->tim34); + __raw_writel(2 << 22, ®s->tcr); +} + +static ulong get_timer_raw(void) +{ + ulong now = __raw_readl(®s->tim34); + + if (now >= lastinc) + timestamp += now - lastinc; + else + timestamp += now + TIMER_LOAD_VAL - lastinc; + + lastinc = now; + + return timestamp; +} + +ulong get_timer(ulong base) +{ + return (get_timer_raw() / (TIMER_LOAD_VAL / TIM_CLK_DIV)) - base; +} + +void set_timer(ulong t) +{ + timestamp = t; +} + +unsigned long long get_ticks(void) +{ + return get_timer(0); +} + +void __udelay(unsigned long usec) +{ + ulong tmo; + ulong endtime; + signed long diff; + + tmo = CONFIG_SYS_HZ_CLOCK / 1000; + tmo *= usec; + tmo /= (1000 * TIM_CLK_DIV); + + endtime = get_timer_raw() + tmo; + + do { + ulong now = get_timer_raw(); + diff = endtime - now; + } while (diff >= 0); +} + +ulong get_tbclk(void) +{ + return CONFIG_SYS_HZ; +} diff --git a/u-boot/arch/arm/cpu/arm1176/tnetv107x/wdt.c b/u-boot/arch/arm/cpu/arm1176/tnetv107x/wdt.c new file mode 100644 index 0000000..18aadb0 --- /dev/null +++ b/u-boot/arch/arm/cpu/arm1176/tnetv107x/wdt.c @@ -0,0 +1,180 @@ +/* + * TNETV107X: Watchdog timer implementation (for reset) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/clock.h> + +#define MAX_DIV 0xFFFE0001 + +struct wdt_regs { + u32 kick_lock; +#define KICK_LOCK_1 0x5555 +#define KICK_LOCK_2 0xaaaa + u32 kick; + + u32 change_lock; +#define CHANGE_LOCK_1 0x6666 +#define CHANGE_LOCK_2 0xbbbb + u32 change; + + u32 disable_lock; +#define DISABLE_LOCK_1 0x7777 +#define DISABLE_LOCK_2 0xcccc +#define DISABLE_LOCK_3 0xdddd + u32 disable; + + u32 prescale_lock; +#define PRESCALE_LOCK_1 0x5a5a +#define PRESCALE_LOCK_2 0xa5a5 + u32 prescale; +}; + +static struct wdt_regs* regs = (struct wdt_regs *)TNETV107X_WDT0_ARM_BASE; + +#define wdt_reg_read(reg) __raw_readl(®s->reg) +#define wdt_reg_write(reg, val) __raw_writel((val), ®s->reg) + +static int write_prescale_reg(unsigned long prescale_value) +{ + wdt_reg_write(prescale_lock, PRESCALE_LOCK_1); + if ((wdt_reg_read(prescale_lock) & 0x3) != 0x1) + return -1; + + wdt_reg_write(prescale_lock, PRESCALE_LOCK_2); + if ((wdt_reg_read(prescale_lock) & 0x3) != 0x3) + return -1; + + wdt_reg_write(prescale, prescale_value); + + return 0; +} + +static int write_change_reg(unsigned long initial_timer_value) +{ + wdt_reg_write(change_lock, CHANGE_LOCK_1); + if ((wdt_reg_read(change_lock) & 0x3) != 0x1) + return -1; + + wdt_reg_write(change_lock, CHANGE_LOCK_2); + if ((wdt_reg_read(change_lock) & 0x3) != 0x3) + return -1; + + wdt_reg_write(change, initial_timer_value); + + return 0; +} + +static int wdt_control(unsigned long disable_value) +{ + wdt_reg_write(disable_lock, DISABLE_LOCK_1); + if ((wdt_reg_read(disable_lock) & 0x3) != 0x1) + return -1; + + wdt_reg_write(disable_lock, DISABLE_LOCK_2); + if ((wdt_reg_read(disable_lock) & 0x3) != 0x2) + return -1; + + wdt_reg_write(disable_lock, DISABLE_LOCK_3); + if ((wdt_reg_read(disable_lock) & 0x3) != 0x3) + return -1; + + wdt_reg_write(disable, disable_value); + return 0; +} + +static int wdt_set_period(unsigned long msec) +{ + unsigned long change_value, count_value; + unsigned long prescale_value = 1; + unsigned long refclk_khz, maxdiv; + int ret; + + refclk_khz = clk_get_rate(TNETV107X_LPSC_WDT_ARM); + maxdiv = (MAX_DIV / refclk_khz); + + if ((!msec) || (msec > maxdiv)) + return -1; + + count_value = refclk_khz * msec; + if (count_value > 0xffff) { + change_value = count_value / 0xffff + 1; + prescale_value = count_value / change_value; + } else { + change_value = count_value; + } + + ret = write_prescale_reg(prescale_value - 1); + if (ret) + return ret; + + ret = write_change_reg(change_value); + if (ret) + return ret; + + return 0; +} + +unsigned long last_wdt = -1; + +int wdt_start(unsigned long msecs) +{ + int ret; + ret = wdt_control(0); + if (ret) + return ret; + ret = wdt_set_period(msecs); + if (ret) + return ret; + ret = wdt_control(1); + if (ret) + return ret; + ret = wdt_kick(); + last_wdt = msecs; + return ret; +} + +int wdt_stop(void) +{ + last_wdt = -1; + return wdt_control(0); +} + +int wdt_kick(void) +{ + wdt_reg_write(kick_lock, KICK_LOCK_1); + if ((wdt_reg_read(kick_lock) & 0x3) != 0x1) + return -1; + + wdt_reg_write(kick_lock, KICK_LOCK_2); + if ((wdt_reg_read(kick_lock) & 0x3) != 0x3) + return -1; + + wdt_reg_write(kick, 1); + return 0; +} + +void reset_cpu(ulong addr) +{ + clk_enable(TNETV107X_LPSC_WDT_ARM); + wdt_start(1); + wdt_kick(); +} diff --git a/u-boot/arch/arm/cpu/arm1176/u-boot.lds b/u-boot/arch/arm/cpu/arm1176/u-boot.lds new file mode 100644 index 0000000..fe31800 --- /dev/null +++ b/u-boot/arch/arm/cpu/arm1176/u-boot.lds @@ -0,0 +1,76 @@ +/* + * (C) Copyright 2002-2004 + * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + . = 0x00000000; + + . = ALIGN(4); + .text : + { + arch/arm/cpu/arm1176/start.o (.text) + *(.text) + } + + . = ALIGN(4); + .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) } + + . = ALIGN(4); + .data : { + *(.data) + } + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + . = ALIGN(4); + + .rel.dyn : { + __rel_dyn_start = .; + *(.rel*) + __rel_dyn_end = .; + } + + .dynsym : { + __dynsym_start = .; + *(.dynsym) + } + + .bss __rel_dyn_start (OVERLAY) : { + __bss_start = .; + *(.bss) + . = ALIGN(4); + _end = .; + } + + /DISCARD/ : { *(.dynstr*) } + /DISCARD/ : { *(.dynamic*) } + /DISCARD/ : { *(.plt*) } + /DISCARD/ : { *(.interp*) } + /DISCARD/ : { *(.gnu*) } +} |