1 files changed, 105 insertions, 0 deletions
diff --git a/u-boot/arch/arm/cpu/arm926ejs/kirkwood/dram.c b/u-boot/arch/arm/cpu/arm926ejs/kirkwood/dram.c
new file mode 100644
index 0000000..2441554
--- /dev/null
+++ b/u-boot/arch/arm/cpu/arm926ejs/kirkwood/dram.c
@@ -0,0 +1,105 @@
+/*
+ * (C) Copyright 2009
+ * Marvell Semiconductor <www.marvell.com>
+ * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#include <config.h>
+#include <common.h>
+#include <asm/arch/kirkwood.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define KW_REG_CPUCS_WIN_BAR(x)		(KW_REGISTER(0x1500) + (x * 0x08))
+#define KW_REG_CPUCS_WIN_SZ(x)		(KW_REGISTER(0x1504) + (x * 0x08))
+/*
+ * kw_sdram_bar - reads SDRAM Base Address Register
+ */
+u32 kw_sdram_bar(enum memory_bank bank)
+{
+	u32 result = 0;
+	u32 enable = 0x01 & readl(KW_REG_CPUCS_WIN_SZ(bank));
+
+	if ((!enable) || (bank > BANK3))
+		return 0;
+
+	result = readl(KW_REG_CPUCS_WIN_BAR(bank));
+	return result;
+}
+
+/*
+ * kw_sdram_bs - reads SDRAM Bank size
+ */
+u32 kw_sdram_bs(enum memory_bank bank)
+{
+	u32 result = 0;
+	u32 enable = 0x01 & readl(KW_REG_CPUCS_WIN_SZ(bank));
+
+	if ((!enable) || (bank > BANK3))
+		return 0;
+	result = 0xff000000 & readl(KW_REG_CPUCS_WIN_SZ(bank));
+	result += 0x01000000;
+	return result;
+}
+
+#ifndef CONFIG_SYS_BOARD_DRAM_INIT
+int dram_init(void)
+{
+	int i;
+
+	gd->ram_size = 0;
+	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
+		gd->bd->bi_dram[i].start = kw_sdram_bar(i);
+		gd->bd->bi_dram[i].size = kw_sdram_bs(i);
+		/*
+		 * It is assumed that all memory banks are consecutive
+		 * and without gaps.
+		 * If the gap is found, ram_size will be reported for
+		 * consecutive memory only
+		 */
+		if (gd->bd->bi_dram[i].start != gd->ram_size)
+			break;
+
+		gd->ram_size += gd->bd->bi_dram[i].size;
+
+	}
+
+	for (; i < CONFIG_NR_DRAM_BANKS; i++) {
+		/* If above loop terminated prematurely, we need to set
+		 * remaining banks' start address & size as 0. Otherwise other
+		 * u-boot functions and Linux kernel gets wrong values which
+		 * could result in crash */
+		gd->bd->bi_dram[i].start = 0;
+		gd->bd->bi_dram[i].size = 0;
+	}
+
+	return 0;
+}
+
+/*
+ * If this function is not defined here,
+ * board.c alters dram bank zero configuration defined above.
+ */
+void dram_init_banksize(void)
+{
+	dram_init();
+}
+#endif /* CONFIG_SYS_BOARD_DRAM_INIT */