tree moved to a better location

1 files changed, 0 insertions, 205 deletions

diff --git a/x-loader/include/configs/omap3530beagle.h b/x-loader/include/configs/omap3530beagle.h
deleted file mode 100644
index 5625417..0000000
--- a/x-loader/include/configs/omap3530beagle.h
+++ /dev/null
@@ -1,205 +0,0 @@
-/*
- * (C) Copyright 2006 
- * Texas Instruments <www.ti.com>
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * X-Loader Configuation settings for the TI OMAP SDP3430 board.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/* serial printf facility takes about 3.5K */
-#define CFG_PRINTF 
-//#undef CFG_PRINTF 
-
-/*
- * High Level Configuration Options
- */
-#define CONFIG_ARMCORTEXA8	1	/* This is an ARM V7 CPU core */
-#define CONFIG_OMAP		1	/* in a TI OMAP core */
-#define CONFIG_OMAP34XX		1	/* which is a 34XX */
-#define CONFIG_OMAP3430		1	/* which is in a 3430 */
-#define CONFIG_OMAP3_BEAGLE	1	/* working with BEAGLE */
-
-#define CONFIG_BEAGLE_REV2	1
-
-/* Enable the below macro if MMC boot support is required */
-#define CONFIG_MMC	1
-#if defined(CONFIG_MMC)
-	#define CFG_CMD_MMC		1
-	#define CFG_CMD_FAT		1
-	#define CFG_I2C_SPEED		100000
-	#define CFG_I2C_SLAVE		1
-	#define CFG_I2C_BUS		0
-	#define CFG_I2C_BUS_SELECT	1
-	#define CONFIG_DRIVER_OMAP34XX_I2C 1
-#endif
-
-#include <asm/arch/cpu.h>        /* get chip and board defs */
-
-/* uncomment it if you need timer based udelay(). it takes about 250 bytes */
-//#define CFG_UDELAY
- 
-/* Clock Defines */
-#define V_OSCK	26000000  /* Clock output from T2 */
-
-#if (V_OSCK > 19200000)
-#define V_SCLK	(V_OSCK >> 1)
-#else
-#define V_SCLK	V_OSCK
-#endif
-
-//#define PRCM_CLK_CFG2_266MHZ	1	/* VDD2=1.15v - 133MHz DDR */
-#define PRCM_CLK_CFG2_332MHZ	1	/* VDD2=1.15v - 166MHz DDR */
-#define PRCM_PCLK_OPP2		1	/* ARM=381MHz - VDD1=1.20v */
-
-/* Memory type */
-#define CFG_3430SDRAM_DDR	1
-
-/* The actual register values are defined in u-boot- mem.h */
-/* SDRAM Bank Allocation method */
-//#define SDRC_B_R_C		1
-//#define SDRC_B1_R_B0_C	1
-#define SDRC_R_B_C		1
-
-#define NAND_BASE_ADR	NAND_BASE
-#define ONENAND_BASE	ONENAND_MAP
-#define ONENAND_ADDR	ONENAND_BASE
-
-#define OMAP34XX_GPMC_CS0_SIZE GPMC_SIZE_128M
-
-#ifdef CFG_PRINTF
-
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
-#define CFG_NS16550_REG_SIZE	-4
-#define CFG_NS16550_CLK		48000000
-#define CFG_NS16550_COM3	OMAP34XX_UART3
-
-/*
- * select serial console configuration
- */
-#define CONFIG_SERIAL1		3	/* use UART3 */
-#define CONFIG_CONS_INDEX	3
-
-#define CONFIG_BAUDRATE		115200
-#define CFG_PBSIZE		256
-
-#endif /* CFG_PRINTF */
-
-/*
- * Miscellaneous configurable options
- */
-#define CFG_LOADADDR		0x80008000
-  
-#undef	CFG_CLKS_IN_HZ		/* everything, incl board info, in Hz */
- 
-/*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE	(128*1024) /* regular stack */
-
-/*-----------------------------------------------------------------------
- * Board NAND Info.
- */
-
-
-#define CFG_NAND_K9F1G08R0A
-#define NAND_16BIT
-
-/* NAND is partitioned:
- * 0x00000000 - 0x0007FFFF  Booting Image
- * 0x00080000 - 0x000BFFFF  U-Boot Image
- * 0x000C0000 - 0x000FFFFF  U-Boot Env Data (X-loader doesn't care)
- * 0x00100000 - 0x002FFFFF  Kernel Image
- * 0x00300000 - 0x08000000  depends on application
- */
-#define NAND_UBOOT_START	0x0080000 /* Leaving first 4 blocks for x-load */
-#define NAND_UBOOT_END		0x0160000 /* Giving a space of 2 blocks = 256KB */
-#define NAND_BLOCK_SIZE		0x20000
-  
-#define GPMC_CONFIG 		(OMAP34XX_GPMC_BASE+0x50)
-#define GPMC_NAND_COMMAND_0	(OMAP34XX_GPMC_BASE+0x7C)
-#define GPMC_NAND_ADDRESS_0	(OMAP34XX_GPMC_BASE+0x80)
-#define GPMC_NAND_DATA_0	(OMAP34XX_GPMC_BASE+0x84)
-
-#ifdef NAND_16BIT
-#define WRITE_NAND_COMMAND(d, adr) \
-	do {*(volatile u16 *)GPMC_NAND_COMMAND_0 = d; } while (0)
-#define WRITE_NAND_ADDRESS(d, adr) \
-	do {*(volatile u16 *)GPMC_NAND_ADDRESS_0 = d; } while (0)
-#define WRITE_NAND(d, adr) \
-	do {*(volatile u16 *)GPMC_NAND_DATA_0 = d; } while (0)
-#define READ_NAND(adr) \
-	(*(volatile u16 *)GPMC_NAND_DATA_0)
-#define NAND_WAIT_READY()
-#define NAND_WP_OFF()  \
-	do {*(volatile u32 *)(GPMC_CONFIG) |= 0x00000010; } while (0)
-#define NAND_WP_ON()  \
-	 do {*(volatile u32 *)(GPMC_CONFIG) &= ~0x00000010; } while (0)
-
-#else /* to support 8-bit NAND devices */
-#define WRITE_NAND_COMMAND(d, adr) \
-	do {*(volatile u8 *)GPMC_NAND_COMMAND_0 = d; } while (0)
-#define WRITE_NAND_ADDRESS(d, adr) \
-	 do {*(volatile u8 *)GPMC_NAND_ADDRESS_0 = d; } while (0)
-#define WRITE_NAND(d, adr) \
-	do {*(volatile u8 *)GPMC_NAND_DATA_0 = d; } while (0)
-#define READ_NAND(adr) \
-	(*(volatile u8 *)GPMC_NAND_DATA_0);
-#define NAND_WAIT_READY()
-#define NAND_WP_OFF()  \
-	do {*(volatile u32 *)(GPMC_CONFIG) |= 0x00000010; } while (0)
-#define NAND_WP_ON()  \
-	do {*(volatile u32 *)(GPMC_CONFIG) &= ~0x00000010; } while (0)
-
-#endif
-
-#define NAND_CTL_CLRALE(adr) 
-#define NAND_CTL_SETALE(adr) 
-#define NAND_CTL_CLRCLE(adr) 
-#define NAND_CTL_SETCLE(adr) 
-#define NAND_DISABLE_CE() 
-#define NAND_ENABLE_CE() 
-
-/*-----------------------------------------------------------------------
- * Board oneNAND Info.
- */
-#define CFG_SYNC_BURST_READ	1
-
-/* OneNAND is partitioned:
- *   0x0000000 - 0x0080000  X-Loader 
- *   0x0080000 - 0x00c0000   U-boot Image
- *   0x00c0000 - 0x00e0000   U-Boot Env Data (X-loader doesn't care)
- *   0x00e0000 - 0x0120000   Kernel Image
- *   0x0120000 - 0x4000000   depends on application
- */
-
-#define ONENAND_START_BLOCK 	4
-#define ONENAND_END_BLOCK	6
-#define ONENAND_PAGE_SIZE	2048     /* 2KB */
-#define ONENAND_BLOCK_SIZE	0x20000  /* 128KB */
-
-#endif /* __CONFIG_H */
-