aboutsummaryrefslogtreecommitdiffstats
path: root/board/omap2430sdp
diff options
context:
space:
mode:
Diffstat (limited to 'board/omap2430sdp')
-rw-r--r--board/omap2430sdp/Makefile51
-rw-r--r--board/omap2430sdp/config.mk28
-rw-r--r--board/omap2430sdp/omap2430sdp.c746
-rw-r--r--board/omap2430sdp/platform.S198
-rw-r--r--board/omap2430sdp/x-load.lds54
5 files changed, 1077 insertions, 0 deletions
diff --git a/board/omap2430sdp/Makefile b/board/omap2430sdp/Makefile
new file mode 100644
index 0000000..b6c984c
--- /dev/null
+++ b/board/omap2430sdp/Makefile
@@ -0,0 +1,51 @@
+#
+# (C) Copyright 2000, 2001, 2002
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS := omap2430sdp.o
+SOBJS := platform.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) crv $@ $(OBJS) $(SOBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/omap2430sdp/config.mk b/board/omap2430sdp/config.mk
new file mode 100644
index 0000000..7bc5078
--- /dev/null
+++ b/board/omap2430sdp/config.mk
@@ -0,0 +1,28 @@
+#
+# (C) Copyright 2004
+# Texas Instruments, <www.ti.com>
+#
+# TI H4 board with OMAP2420 (ARM1136) cpu
+# see http://www.ti.com/ for more information on Texas Instruments
+#
+# H4 has 1 bank of 32MB or 64MB mDDR-SDRAM on CS0
+# H4 has 1 bank of 32MB or 00MB mDDR-SDRAM on CS1
+# Physical Address:
+# 8000'0000 (bank0)
+# A000/0000 (bank1) ES2 will be configurable
+# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000
+# (mem base + reserved)
+
+# 2430 h4 has same mem configuration as h4.
+
+# For use with external or internal boots.
+# CONFIG_PARTIAL_SRAM must be defined to use this.
+TEXT_BASE = 0x80e80000
+
+# Used with full SRAM boot.
+# This is either with a GP system or a signed boot image.
+# easiest, and safest way to go if you can.
+# Comment out //CONFIG_PARTIAL_SRAM for this one.
+#
+#TEXT_BASE = 0x40280000
+
diff --git a/board/omap2430sdp/omap2430sdp.c b/board/omap2430sdp/omap2430sdp.c
new file mode 100644
index 0000000..f2a7b42
--- /dev/null
+++ b/board/omap2430sdp/omap2430sdp.c
@@ -0,0 +1,746 @@
+/*
+ * (C) Copyright 2004-2005
+ * Texas Instruments, <www.ti.com>
+ * Jian Zhang <jzhang@ti.com>
+ * Richard Woodruff <r-woodruff2@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <asm/arch/omap2430.h>
+#include <asm/arch/bits.h>
+#include <asm/arch/mem.h>
+#include <asm/arch/sys_info.h>
+#include <asm/arch/clocks.h>
+
+static void wait_for_command_complete(unsigned int wd_base);
+static void watchdog_init(void);
+static void peripheral_enable(void);
+static void muxSetupAll(void);
+static u32 get_cpu_rev(void);
+static u32 get_device_type(void);
+static void prcm_init(void);
+
+
+/*******************************************************
+ * Routine: delay
+ * Description: spinning delay to use before udelay works
+ ******************************************************/
+static inline void delay (unsigned long loops)
+{
+ __asm__ volatile ("1:\n"
+ "subs %0, %1, #1\n"
+ "bne 1b":"=r" (loops):"0" (loops));
+}
+
+/*****************************************
+ * Routine: board_init
+ * Description: Early hardware init.
+ *****************************************/
+int board_init (void)
+{
+ return 0;
+}
+
+/******************************************
+ * get_cpu_rev(void) - extract version info
+ ******************************************/
+u32 get_cpu_rev(void)
+{
+ u32 v;
+ v = __raw_readl(TAP_IDCODE_REG);
+ v = v >> 28;
+ return(v+1); /* currently 2422 and 2420 match up */
+}
+
+/*************************************************************
+ * get_device_type(): tell if GP/HS/EMU/TST
+ *************************************************************/
+u32 get_device_type(void)
+{
+ int mode;
+ mode = __raw_readl(CONTROL_STATUS) & (DEVICE_MASK);
+ return(mode >>= 8);
+}
+
+/*************************************************************
+ * Helper function to wait for the status of a register
+ *************************************************************/
+u32 wait_on_value(u32 read_bit_mask, u32 match_value, u32 read_addr, u32 bound)
+{
+ u32 i = 0, val;
+ do {
+ ++i;
+ val = __raw_readl(read_addr) & read_bit_mask;
+ if (val == match_value)
+ return(1);
+ if (i==bound)
+ return(0);
+ } while (1);
+}
+
+/*************************************************************
+ * Support for multiple type of memory types
+ *************************************************************/
+#ifdef CFG_SDRAM_DDR
+void
+config_sdram_ddr(u32 rev)
+{
+ /* ball D11, mode 0 */
+ __raw_writeb(0x08, 0x48000032);
+
+ /* SDRC_CS0 Configuration */
+ __raw_writel(H4_2420_SDRC_MDCFG_0_DDR, SDRC_MCFG_0);
+ __raw_writel(H4_2420_SDRC_SHARING, SDRC_SHARING);
+
+ __raw_writel(H4_242x_SDRC_RFR_CTRL_ES1, SDRC_RFR_CTRL);
+ __raw_writel(H4_242x_SDRC_ACTIM_CTRLA_0_ES1, SDRC_ACTIM_CTRLA_0);
+ __raw_writel(H4_242x_SDRC_ACTIM_CTRLB_0_ES1, SDRC_ACTIM_CTRLB_0);
+
+ /* Manual Command sequence */
+ __raw_writel(CMD_NOP, SDRC_MANUAL_0);
+ __raw_writel(CMD_PRECHARGE, SDRC_MANUAL_0);
+ __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_0);
+ __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_0);
+
+
+ /*
+ * CS0 SDRC Mode Register
+ * Burst length = 4 - DDR memory
+ * Serial mode
+ * CAS latency = 3
+ */
+ __raw_writel(0x00000032, SDRC_MR_0);
+
+ /* SDRC DLLA control register */
+ /* Delay is 90 degrees */
+ /* Enable DLL, Load counter with 115 (middle of range) */
+ __raw_writel(0x00000008, SDRC_DLLA_CTRL); // ES2.x
+ /* Enable DLL, Load counter with 128 (middle of range) */
+ __raw_writel(0x00000008, SDRC_DLLB_CTRL); // ES2.x
+
+}
+#endif // CFG_SDRAM_DDR
+
+#ifdef CFG_SDRAM_COMBO
+void
+config_sdram_combo(u32 rev)
+{
+
+ u32 dllctrl=0;
+
+ /* ball C12, mode 0 */
+ __raw_writeb(0x00, 0x480000a1);
+ /* ball D11, mode 0 */
+ __raw_writeb(0x00, 0x48000032);
+ /* ball B13, mode 0 - for CKE1 (not needed rkw for combo) */
+ __raw_writeb(0x00, 0x480000a3);
+
+ /*configure sdrc 32 bit for COMBO ddr sdram. Issue soft reset */
+ __raw_writel(0x00000012, SDRC_SYSCONFIG);
+ wait_on_value(BIT0, BIT0, SDRC_STATUS, 12000000); /* wait till reset done set */
+ __raw_writel(0x00000000, SDRC_SYSCONFIG);
+
+ /* SDRCTriState: no Tris */
+ /* CS0MuxCfg: 000 (32-bit SDRAM on D31..0) */
+ if (rev == CPU_2420_2422_ES1)
+ __raw_writel(H4_2422_SDRC_SHARING, SDRC_SHARING);
+ else
+ __raw_writel(H4_2420_SDRC_SHARING, SDRC_SHARING);
+
+
+ /* CS0 SDRC Memory Configuration, */
+ /* DDR-SDRAM, External SDRAM is x32bit, */
+ /* Configure to MUX9: 1x8Mbx32 */
+ __raw_writel(H4_2420_COMBO_MDCFG_0_DDR, SDRC_MCFG_0);
+ __raw_writel(H4_2420_SDRC_ACTIM_CTRLA_0, SDRC_ACTIM_CTRLA_0);
+ __raw_writel(H4_2420_SDRC_ACTIM_CTRLB_0, SDRC_ACTIM_CTRLB_0);
+
+ /* This is reqd only for ES1 */
+ if (rev == CPU_242X_ES1)
+ __raw_writel(H4_242x_SDRC_RFR_CTRL_ES1, SDRC_RFR_CTRL);
+
+ /* Manual Command sequence */
+ __raw_writel(CMD_NOP, SDRC_MANUAL_0);
+ delay(5000);
+ __raw_writel(CMD_PRECHARGE, SDRC_MANUAL_0);
+ __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_0);
+ __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_0);
+
+ /* CS0 SDRC Mode Register */
+ /* Burst length = 4 - DDR memory */
+ /* Serial mode */
+ /* CAS latency = 3 */
+ __raw_writel(H4_2422_SDRC_MR_0_DDR, SDRC_MR_0);
+
+ /* CS1 SDRC Memory Configuration, */
+ /* DDR-SDRAM, External SDRAM is x32bit, */
+ /* Configure to MUX9: 1x8Mbx32 */
+ __raw_writel(H4_2420_COMBO_MDCFG_0_DDR, SDRC_MCFG_1);
+ __raw_writel(H4_242X_SDRC_ACTIM_CTRLA_0_100MHz, SDRC_ACTIM_CTRLA_1);
+ __raw_writel(H4_2420_SDRC_ACTIM_CTRLB_0, SDRC_ACTIM_CTRLB_1);
+ /* This is reqd only for ES1 */
+ if (rev == CPU_242X_ES1)
+ __raw_writel(H4_242x_SDRC_RFR_CTRL_ES1, 0x680090d4);
+
+ /* Manual Command sequence */
+ __raw_writel(CMD_NOP, 0x680090d8);
+ __raw_writel(CMD_PRECHARGE, 0x680090d8);
+ __raw_writel(CMD_AUTOREFRESH, 0x680090d8);
+ __raw_writel(CMD_AUTOREFRESH, 0x680090d8);
+
+ /* CS1 SDRC Mode Register */
+ /* Burst length = 4 - DDR memory */
+ /* Serial mode */
+ /* CAS latency = 3 */
+ __raw_writel(H4_2422_SDRC_MR_0_DDR, 0x680090b4);
+
+ /* SDRC DLLA control register */
+ /* Delay is 90 degrees */
+
+ if (rev == CPU_242X_ES1)
+ dllctrl = (BIT0|BIT3);
+ else
+ dllctrl = BIT0;
+
+ if (rev == CPU_2420_2422_ES1) {
+ /* Enable DLL, Load counter with 115 (middle of range) */
+ __raw_writel(0x00007306, SDRC_DLLA_CTRL);
+ __raw_writel(0x00007302, SDRC_DLLA_CTRL);
+ /* Enable DLL, Load counter with 128 (middle of range) */
+ __raw_writel(0x00007306, SDRC_DLLB_CTRL); /* load ctr value */
+ __raw_writel(0x00007302, SDRC_DLLB_CTRL); /* lock and go */
+ }
+ else {
+ /* Enable DLL, Load counter with 115 (middle of range) */
+ __raw_writel(H4_2420_SDRC_DLLAB_CTRL, SDRC_DLLA_CTRL); // ES2.x
+ __raw_writel(H4_2420_SDRC_DLLAB_CTRL & ~(LOADDLL|dllctrl), SDRC_DLLA_CTRL); // ES2.x
+ // __raw_writel(0x00009808, SDRC_DLLA_CTRL); // ES2.x
+ /* Enable DLL, Load counter with 128 (middle of range) */
+ __raw_writel(H4_2420_SDRC_DLLAB_CTRL, SDRC_DLLB_CTRL); // ES2.x ?
+ __raw_writel(H4_2420_SDRC_DLLAB_CTRL & ~(LOADDLL|dllctrl), SDRC_DLLB_CTRL); // ES2.x
+ //__raw_writel(0x00009808, SDRC_DLLB_CTRL); // ES2.x
+ }
+}
+
+#endif // CFG_SDRAM_COMBO
+
+#ifdef CFG_2430SDRAM_DDR
+void
+config_2430sdram_ddr(u32 rev)
+{
+ u32 dllstat, dllctrl;
+
+ __raw_writel(0x00000012, SDRC_SYSCONFIG);
+ wait_on_value(BIT0, BIT0, SDRC_STATUS, 12000000); /* wait till reset done set */
+ __raw_writel(0x00000000, SDRC_SYSCONFIG);
+
+ /* Chip-level shared interface management */
+ /* SDRCTriState: no Tris */
+ /* CS0MuxCfg: 000 (32-bit SDRAM on D31..0) */
+ /* CS1MuxCfg: 000 (32-bit SDRAM on D31..0) */
+ __raw_writel(H4_2420_SDRC_SHARING, SDRC_SHARING);
+
+ /* CS0 SDRC Memory Configuration, */
+ /* DDR-SDRAM, External SDRAM is x32bit, */
+ /* Configure to MUX14: 32Mbx32 */
+ __raw_writel(SDP_2430_SDRC_MDCFG_0_DDR, SDRC_MCFG_0);
+ __raw_writel(SDP_2430_SDRC_ACTIM_CTRLA_0, SDRC_ACTIM_CTRLA_0);
+ __raw_writel(H4_2420_SDRC_ACTIM_CTRLB_0, SDRC_ACTIM_CTRLB_0);
+
+ __raw_writel(H4_2420_SDRC_RFR_CTRL, SDRC_RFR_CTRL);
+
+ /* Manual Command sequence */
+ __raw_writel(CMD_NOP, SDRC_MANUAL_0);
+ delay(5000);
+ __raw_writel(CMD_PRECHARGE, SDRC_MANUAL_0);
+ __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_0);
+ __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_0);
+
+ /* CS0 SDRC Mode Register */
+ /* Burst length = 2 - SDR memory */
+ /* Serial mode */
+ /* CAS latency = 3 */
+ __raw_writel(H4_2420_SDRC_MR_0_DDR, SDRC_MR_0);
+
+ /* Set up SDRC DLL values for 2430 DDR */
+ dllctrl = (SDP_2430_SDRC_DLLAB_CTRL & ~BIT2); /* set target ctrl val */
+ __raw_writel(dllctrl, SDRC_DLLA_CTRL); /* set lock mode */
+ __raw_writel(dllctrl, SDRC_DLLB_CTRL); /* set lock mode */
+ delay(0x1000); /* time to track to center */
+ dllstat = __raw_readl(SDRC_DLLA_STATUS) & 0xFF00; /* get status */
+ dllctrl = (dllctrl & 0x00FF) | dllstat | BIT2; /* build unlock value */
+ __raw_writel(dllctrl, SDRC_DLLA_CTRL); /* set unlock mode */
+ __raw_writel(dllctrl, SDRC_DLLB_CTRL); /* set unlock mode */
+}
+#endif // CFG_2430SDRAM_DDR
+
+#ifdef CFG_SDRAM_STACKED
+void
+config_sdram_stacked(u32 rev)
+{
+
+ /* Pin Muxing for SDRC */
+ __raw_writeb(0x00, 0x480000a1); /* mux mode 0 (CS1) */
+ __raw_writeb(0x00, 0x480000a3); /* mux mode 0 (CKE1) */
+ __raw_writeb(0x00, 0x48000032); /* connect sdrc_a12 */
+ __raw_writeb(0x00, 0x48000031); /* connect sdrc_a13 */
+
+ /* configure sdrc 32 bit for COMBO ddr sdram */
+ __raw_writel(0x00000010, SDRC_SYSCONFIG); /* no idle ack and RESET enable */
+ delay(200000);
+ __raw_writel(0x00000010, SDRC_SYSCONFIG); /* smart idle mode */
+
+ /* SDRC_SHARING */
+ /* U-boot is writing 0x00000100 though (H4_2420_SDRC_SHARING ) */
+ //__raw_writel(H4_2420_SDRC_SHARING, SDRC_SHARING);
+
+ __raw_writel(0x00004900, SDRC_SHARING);
+
+ /* SDRC_CS0 Configuration */
+ /* None for ES2.1 */
+
+ /* SDRC_CS1 Configuration */
+ __raw_writel(0x00000000, SDRC_CS_CFG); /* Remap CS1 to 0x80000000 */
+
+ /* Disable power down of CKE */
+ __raw_writel(0x00000085, SDRC_POWER);
+
+ __raw_writel(0x01A02019, SDRC_MCFG_1); /* SDRC_MCFG1 */
+ __raw_writel(0x0003DD03, SDRC_RFR_CTRL1); /* SDRC_RFR_CTRL1 */
+ __raw_writel(0x92DDC485, SDRC_ACTIM_CTRLA_1); /* SDRC_ACTIM_CTRLA0 */
+ __raw_writel(0x00000014, SDRC_ACTIM_CTRLB_1); /* SDRC_ACTIM_CTRLB0 */
+
+ /*Manual Command sequence */
+ __raw_writel(0x00000000, 0x680090D8);
+ __raw_writel(0x00000001, 0x680090D8);
+ __raw_writel(0x00000002, 0x680090D8);
+ __raw_writel(0x00000002, 0x680090D8);
+
+ /* CS0 SDRC Mode Register */
+ /* Burst length = 4 - DDR memory */
+ /* Serial mode */
+ /* CAS latency = 3 */
+ __raw_writel(0x00000032, 0x680090B4);
+ __raw_writel(0x00000020, 0x680090BC); /* weak-strength driver */
+
+ /* SDRC DLLA control register */
+ /* Delay is 90 degrees */
+ if (rev == CPU_2420_2422_ES1) {
+ /* Enable DLL, Load counter with 115 (middle of range) */
+ __raw_writel(0x00007302, SDRC_DLLA_CTRL);
+ /* Enable DLL, Load counter with 128 (middle of range) */
+ __raw_writel(0x00007302, SDRC_DLLB_CTRL);
+ }
+ else {
+ /* Enable DLL, Load counter with 115 (middle of range) */
+ __raw_writel(0x00003108, SDRC_DLLA_CTRL); // ES2.x
+ /* Enable DLL, Load counter with 128 (middle of range) */
+ __raw_writel(0x00003108, SDRC_DLLB_CTRL); // ES2.x
+ }
+}
+#endif // CFG_SDRAM_STACKED
+
+/*************************************************************
+ * get_sys_clk_speed - determine reference oscillator speed
+ * based on known 32kHz clock and gptimer.
+ *************************************************************/
+u32 get_osc_clk_speed(u32 *shift)
+{
+#define GPT_EN ((0<<2)|BIT1|BIT0) /* enable sys_clk NO-prescale /1 */
+#define GPT_CTR OMAP24XX_GPT2+TCRR /* read counter address */
+ u32 start, cstart, cend, cdiff, val;
+ unsigned int v, if_clks=0, func_clks=0 ;
+
+
+
+ if(__raw_readl(PRCM_CLKSRC_CTRL) & BIT7){ /* if currently /2 */
+ *shift = 1;
+ }else{
+ *shift = 0;
+ }
+
+ /* enable timer2 */
+ val = __raw_readl(CM_CLKSEL2_CORE) | 0x4; /* mask for sys_clk use */
+ __raw_writel(val, CM_CLKSEL2_CORE); /* timer2 source to sys_clk */
+ __raw_writel(BIT4, CM_ICLKEN1_CORE); /* timer2 interface clock on */
+ __raw_writel(BIT4, CM_FCLKEN1_CORE); /* timer2 function clock on */
+ /* Enable GP2 timer.*/
+ if_clks |= BIT4;
+ func_clks |= BIT4;
+ v = __raw_readl(CM_ICLKEN1_CORE) | if_clks; /* Interface clocks on */
+ __raw_writel(v,CM_ICLKEN1_CORE );
+ v = __raw_readl(CM_FCLKEN1_CORE) | func_clks; /* Functional Clocks on */
+ __raw_writel(v, CM_FCLKEN1_CORE);
+ __raw_writel(0, OMAP24XX_GPT2+TLDR); /* start counting at 0 */
+ __raw_writel(GPT_EN, OMAP24XX_GPT2+TCLR); /* enable clock */
+ /* enable 32kHz source */ /* enabled out of reset */
+ /* determine sys_clk via gauging */
+ start = 20 + __raw_readl(S32K_CR); /* start time in 20 cycles*/
+ while(__raw_readl(S32K_CR) < start); /* dead loop till start time */
+ cstart = __raw_readl(GPT_CTR); /* get start sys_clk count */
+ while(__raw_readl(S32K_CR) < (start+20)); /* wait for 40 cycles */
+ cend = __raw_readl(GPT_CTR); /* get end sys_clk count */
+ cdiff = cend - cstart; /* get elapsed ticks */
+ /* based on number of ticks assign speed */
+ if(cdiff > (19000 >> *shift))
+ return(S38_4M);
+ else if (cdiff > (15200 >> *shift))
+ return(S26M);
+ else if (cdiff > (13000 >> *shift))
+ return(S24M);
+ else if (cdiff > (9000 >> *shift))
+ return(S19_2M);
+ else if (cdiff > (7600 >> *shift))
+ return(S13M);
+ else
+ return(S12M);
+}
+
+/*********************************************************************************
+ * prcm_init() - inits clocks for PRCM as defined in clocks.h (config II default).
+ * -- called from SRAM
+ *********************************************************************************/
+void
+prcm_init()
+{
+ u32 div, speed, val, div_by_2;
+
+ val = __raw_readl(PRCM_CLKSRC_CTRL) & ~(BIT1 | BIT0);
+#if defined(OMAP2430_SQUARE_CLOCK_INPUT)
+ __raw_writel(val, PRCM_CLKSRC_CTRL);
+#else
+ __raw_writel((val | BIT0), PRCM_CLKSRC_CTRL);
+#endif
+ speed = get_osc_clk_speed(&div_by_2);
+ if((speed > S19_2M) && (!div_by_2)){ /* if fast && /2 off, enable it */
+ val = ~(BIT6|BIT7) & __raw_readl(PRCM_CLKSRC_CTRL);
+ val |= (0x2 << 6); /* divide by 2 if (24,26,38.4) -> (12/13/19.2) */
+ __raw_writel(val, PRCM_CLKSRC_CTRL);
+ }
+
+ __raw_writel(0, CM_FCLKEN1_CORE); /* stop all clocks to reduce ringing */
+ __raw_writel(0, CM_FCLKEN2_CORE); /* may not be necessary */
+ __raw_writel(0, CM_ICLKEN1_CORE);
+ __raw_writel(0, CM_ICLKEN2_CORE);
+
+ /*DPLL into low power bypass (others off) */
+ __raw_writel(0x00000001, CM_CLKEN_PLL);
+
+ __raw_writel(DPLL_OUT, CM_CLKSEL2_PLL); /* set DPLL out */
+ __raw_writel(MPU_DIV, CM_CLKSEL_MPU); /* set MPU divider */
+ __raw_writel(DSP_DIV, CM_CLKSEL_DSP); /* set dsp and iva dividers */
+ __raw_writel(GFX_DIV, CM_CLKSEL_GFX); /* set gfx dividers */
+ __raw_writel(MDM_DIV, CM_CLKSEL_MDM); /* set mdm dividers */
+
+ div = BUS_DIV;
+ __raw_writel(div, CM_CLKSEL1_CORE);/* set L3/L4/USB/Display/SSi dividers */
+ delay(1000);
+
+ /*13MHz apll src, PRCM 'x' DPLL rate */
+ __raw_writel(DPLL_VAL, CM_CLKSEL1_PLL);
+
+ /*Valid the configuration */
+ __raw_writel(0x00000001, PRCM_CLKCFG_CTRL);
+ delay(1000);
+
+ /* set up APLLS_CLKIN per crystal */
+ if (speed > S19_2M)
+ speed >>= 1; /* if fast shift to /2 range */
+ val = (0x2 << 23); /* default to 13Mhz for 2430c */
+ if (speed == S12M)
+ val = (0x3 << 23);
+ else if (speed == S19_2M)
+ val = (0x0 << 23);
+ val |= (~(BIT23|BIT24|BIT25) & __raw_readl(CM_CLKSEL1_PLL));
+ __raw_writel(val, CM_CLKSEL1_PLL);
+
+ __raw_writel(DPLL_LOCK|APLL_LOCK, CM_CLKEN_PLL); /* enable apll */
+ wait_on_value(BIT8, BIT8, CM_IDLEST_CKGEN, LDELAY);/* wait for apll lock */
+
+ delay(200000);
+}
+
+void SEC_generic(void)
+{
+/* Permission values for registers -Full fledged permissions to all */
+#define UNLOCK_1 0xFFFFFFFF
+#define UNLOCK_2 0x00000000
+#define UNLOCK_3 0x0000FFFF
+ /* Protection Module Register Target APE (PM_RT)*/
+ __raw_writel(UNLOCK_1, PM_RT_APE_BASE_ADDR_ARM + 0x68); /* REQ_INFO_PERMISSION_1 L*/
+ __raw_writel(UNLOCK_1, PM_RT_APE_BASE_ADDR_ARM + 0x50); /* READ_PERMISSION_0 L*/
+ __raw_writel(UNLOCK_1, PM_RT_APE_BASE_ADDR_ARM + 0x58); /* WRITE_PERMISSION_0 L*/
+ __raw_writel(UNLOCK_2, PM_RT_APE_BASE_ADDR_ARM + 0x60); /* ADDR_MATCH_1 L*/
+
+
+ __raw_writel(UNLOCK_3, PM_GPMC_BASE_ADDR_ARM + 0x48); /* REQ_INFO_PERMISSION_0 L*/
+ __raw_writel(UNLOCK_3, PM_GPMC_BASE_ADDR_ARM + 0x50); /* READ_PERMISSION_0 L*/
+ __raw_writel(UNLOCK_3, PM_GPMC_BASE_ADDR_ARM + 0x58); /* WRITE_PERMISSION_0 L*/
+
+ __raw_writel(UNLOCK_3, PM_OCM_RAM_BASE_ADDR_ARM + 0x48); /* REQ_INFO_PERMISSION_0 L*/
+ __raw_writel(UNLOCK_3, PM_OCM_RAM_BASE_ADDR_ARM + 0x50); /* READ_PERMISSION_0 L*/
+ __raw_writel(UNLOCK_3, PM_OCM_RAM_BASE_ADDR_ARM + 0x58); /* WRITE_PERMISSION_0 L*/
+ __raw_writel(UNLOCK_2, PM_OCM_RAM_BASE_ADDR_ARM + 0x80); /* ADDR_MATCH_2 L*/
+
+ /* IVA Changes */
+ __raw_writel(UNLOCK_3, PM_IVA2_BASE_ADDR_ARM + 0x48); /* REQ_INFO_PERMISSION_0 L*/
+ __raw_writel(UNLOCK_3, PM_IVA2_BASE_ADDR_ARM + 0x50); /* READ_PERMISSION_0 L*/
+ __raw_writel(UNLOCK_3, PM_IVA2_BASE_ADDR_ARM + 0x58); /* WRITE_PERMISSION_0 L*/
+}
+
+/**********************************************************
+ * Routine: try_unlock_sram()
+ * Description: If chip is GP type, unlock the SRAM for general use.
+ ***********************************************************/
+void try_unlock_sram(void)
+{
+ int mode;
+
+ /* if GP device unlock device SRAM for general use */
+ mode = get_device_type();
+
+ if ((mode == GP_DEVICE) || (mode == HS_DEVICE) || (mode == EMU_DEVICE)
+ || (mode == TST_DEVICE)) {
+ /* Secure or Emulation device - HS/E/T */
+ SEC_generic();
+ }
+ return;
+}
+
+/**********************************************************
+ * Routine: s_init
+ * Description: Does early system init of muxing and clocks.
+ * - Called at time when only stack is available.
+ **********************************************************/
+
+int s_init(int skip)
+{
+ u32 rev;
+
+ rev = get_cpu_rev();
+
+ watchdog_init();
+ try_unlock_sram();
+ muxSetupAll();
+ delay(100);
+ prcm_init();
+
+#ifdef CFG_SDRAM_DDR
+ config_sdram_ddr(rev);
+#elif defined(CFG_SDRAM_COMBO)
+ config_sdram_combo(rev);
+#elif defined(CFG_2430SDRAM_DDR)
+ config_2430sdram_ddr(rev);
+#elif defined(CFG_SDRAM_STACKED)
+ config_sdram_stacked(rev);
+#else
+#error SDRAM type not supported
+#endif
+
+ delay(20000);
+ peripheral_enable();
+ return(0);
+}
+
+/*******************************************************
+ * Routine: misc_init_r
+ * Description: Init ethernet (done here so udelay works)
+ ********************************************************/
+int misc_init_r (void)
+{
+ return(0);
+}
+
+/****************************************
+ * Routine: watchdog_init
+ * Description: Shut down watch dogs
+ *****************************************/
+static void watchdog_init(void)
+{
+#define GP (BIT8|BIT9)
+
+ /* There are 4 watch dogs. 1 secure, and 3 general purpose.
+ * I would expect that the ROM takes care of the secure one,
+ * but we will try also. Of the 3 GP ones, 1 can reset us
+ * directly, the other 2 only generate MPU interrupts.
+ */
+ __raw_writel(WD_UNLOCK1 ,WD2_BASE+WSPR);
+ wait_for_command_complete(WD2_BASE);
+ __raw_writel(WD_UNLOCK2 ,WD2_BASE+WSPR);
+
+}
+
+/******************************************************
+ * Routine: wait_for_command_complete
+ * Description: Wait for posting to finish on watchdog
+ ******************************************************/
+static void wait_for_command_complete(unsigned int wd_base)
+{
+ int pending = 1;
+ do {
+ pending = __raw_readl(wd_base+WWPS);
+ } while (pending);
+}
+
+
+/**********************************************
+ * Routine: dram_init
+ * Description: sets uboots idea of sdram size
+ **********************************************/
+int dram_init (void)
+{
+ return 0;
+}
+
+/*****************************************************************
+ * Routine: peripheral_enable
+ * Description: Enable the clks & power for perifs (GPT2, UART1,...)
+ ******************************************************************/
+static void peripheral_enable(void)
+{
+ unsigned int v, if_clks=0, if_clks2 = 0, func_clks=0, func_clks2 = 0;
+
+ /* Enable GP2 timer.*/
+ if_clks |= BIT4;
+ func_clks |= BIT4;
+ v = __raw_readl(CM_CLKSEL2_CORE) | 0x4; /* Sys_clk input OMAP24XX_GPT2 */
+ __raw_writel(v, CM_CLKSEL2_CORE);
+ __raw_writel(0x1, CM_CLKSEL_WKUP);
+
+#ifdef CFG_NS16550
+ /* Enable UART1 clock */
+ func_clks |= BIT21;
+ if_clks |= BIT21;
+#endif
+ v = __raw_readl(CM_ICLKEN1_CORE) | if_clks; /* Interface clocks on */
+ __raw_writel(v,CM_ICLKEN1_CORE );
+ v = __raw_readl(CM_ICLKEN2_CORE) | if_clks2; /* Interface clocks on */
+ __raw_writel(v, CM_ICLKEN2_CORE);
+ v = __raw_readl(CM_FCLKEN1_CORE) | func_clks; /* Functional Clocks on */
+ __raw_writel(v, CM_FCLKEN1_CORE);
+ v = __raw_readl(CM_FCLKEN2_CORE) | func_clks2; /* Functional Clocks on */
+ __raw_writel(v, CM_FCLKEN2_CORE);
+ delay(1000);
+
+}
+
+/* Do pin muxing for all the devices used in X-Loader */
+#define MUX_VAL(OFFSET,VALUE)\
+ __raw_writeb(VALUE, OMAP24XX_CTRL_BASE + OFFSET);
+static void muxSetupAll(void)
+{
+ /* UART 1*/
+ MUX_VAL(0x00B1, 0x1B) /* uart1_cts- EN, HI, 3, ->gpio_32 */
+ MUX_VAL(0x00B2, 0x1B) /* uart1_rts- EN, HI, 3, ->gpio_8 */
+ MUX_VAL(0x00B3, 0x1B) /* uart1_tx- EN, HI, 3, ->gpio_9 */
+ MUX_VAL(0x00B4, 0x1B) /* uart1_rx- EN, HI, 3, ->gpio_10 */
+ MUX_VAL(0x0107, 0x01) /* ssi1_dat_tx- Dis, 1, ->uart1_tx */
+ MUX_VAL(0x0108, 0x01) /* ssi1_flag_tx- Dis, 1, ->uart1_rts */
+ MUX_VAL(0x0109, 0x01) /* ssi1_rdy_tx- Dis, 1, ->uart1_cts */
+ MUX_VAL(0x010A, 0x01) /* ssi1_dat_rx- Dis, 1, ->uart1_rx */
+
+ /* Mux settings for SDRC */
+ MUX_VAL(0x0054, 0x1B) /* sdrc_a14 - EN, HI, 3, ->gpio_0 */
+ MUX_VAL(0x0055, 0x1B) /* sdrc_a13 - EN, HI, 3, ->gpio_1 */
+ MUX_VAL(0x0056, 0x00) /* sdrc_a12 - Dis, 0 */
+ MUX_VAL(0x0046, 0x00) /* sdrc_ncs1 - Dis, 0 */
+ MUX_VAL(0x0048, 0x00) /* sdrc_cke1 - Dis, 0 */
+ /* GPMC */
+ MUX_VAL(0x0030, 0x00) /* gpmc_clk - Dis, 0 */
+ MUX_VAL(0x0032, 0x00) /* gpmc_ncs1- Dis, 0 */
+ MUX_VAL(0x0033, 0x00) /* gpmc_ncs2- Dis, 0 */
+ MUX_VAL(0x0034, 0x03) /* gpmc_ncs3- Dis, 3, ->gpio_24 */
+ MUX_VAL(0x0035, 0x03) /* gpmc_ncs4- Dis, 3, ->gpio_25 */
+ MUX_VAL(0x0036, 0x00) /* gpmc_ncs5- Dis, 0 */
+ MUX_VAL(0x0037, 0x03) /* gpmc_ncs6- Dis, 3, ->gpio_27 */
+ MUX_VAL(0x0038, 0x00) /* gpmc_ncs7- Dis, 0 */
+ MUX_VAL(0x0040, 0x18) /* gpmc_wait1- Dis, 0 */
+ MUX_VAL(0x0041, 0x18) /* gpmc_wait2- Dis, 0 */
+ MUX_VAL(0x0042, 0x1B) /* gpmc_wait3- EN, HI, 3, ->gpio_35 */
+ MUX_VAL(0x0085, 0x1B) /* gpmc_a10- EN, HI, 3, ->gpio_3 */
+}
+
+int nand_init(void)
+{
+ u32 rev;
+
+ /* GPMC Configuration */
+ rev = get_cpu_rev();
+
+ /* global settings */
+ __raw_writel(0x10, GPMC_SYSCONFIG); /* smart idle */
+ __raw_writel(0x0, GPMC_IRQENABLE); /* isr's sources masked */
+ __raw_writel(0, GPMC_TIMEOUT_CONTROL);/* timeout disable */
+#ifdef CFG_NAND
+ __raw_writel(0x001, GPMC_CONFIG); /* set nWP, disable limited addr */
+#endif
+
+ /* Set the GPMC Vals . For NAND boot on 2430SDP, NAND is mapped at CS0
+ * , NOR at CS1 and MPDB at CS5. And oneNAND boot, we map oneNAND at CS0.
+ * We configure only GPMC CS0 with required values. Configiring other devices
+ * at other CS in done in u-boot anyway. So we don't have to bother doing it here.
+ */
+ __raw_writel(0, GPMC_CONFIG7_0);
+ sdelay(1000);
+
+#ifdef CFG_NAND
+ __raw_writel( SMNAND_GPMC_CONFIG1, GPMC_CONFIG1_0);
+ __raw_writel( SMNAND_GPMC_CONFIG2, GPMC_CONFIG2_0);
+ __raw_writel( SMNAND_GPMC_CONFIG3, GPMC_CONFIG3_0);
+ __raw_writel( SMNAND_GPMC_CONFIG4, GPMC_CONFIG4_0);
+ __raw_writel( SMNAND_GPMC_CONFIG5, GPMC_CONFIG5_0);
+ __raw_writel( SMNAND_GPMC_CONFIG6, GPMC_CONFIG6_0);
+
+#else /* CFG_ONENAND */
+ __raw_writel( ONENAND_GPMC_CONFIG1, GPMC_CONFIG1_0);
+ __raw_writel( ONENAND_GPMC_CONFIG2, GPMC_CONFIG2_0);
+ __raw_writel( ONENAND_GPMC_CONFIG3, GPMC_CONFIG3_0);
+ __raw_writel( ONENAND_GPMC_CONFIG4, GPMC_CONFIG4_0);
+ __raw_writel( ONENAND_GPMC_CONFIG5, GPMC_CONFIG5_0);
+ __raw_writel( ONENAND_GPMC_CONFIG6, GPMC_CONFIG6_0);
+#endif
+
+ /* Enable the GPMC Mapping */
+ __raw_writel(( ((OMAP24XX_GPMC_CS0_SIZE & 0xF)<<8) |
+ ((OMAP24XX_GPMC_CS0_MAP>>24) & 0x3F) |
+ (1<<6) ), GPMC_CONFIG7_0);
+ sdelay(2000);
+#ifdef CFG_NAND
+ if (nand_chip()){
+#ifdef CFG_PRINTF
+ printf("Unsupported Chip!\n");
+#endif
+ return 1;
+ }
+#else
+ if (onenand_chip()){
+#ifdef CFG_PRINTF
+ printf("OneNAND Unsupported !\n");
+#endif
+ return 1;
+ }
+
+#endif
+ return 0;
+}
+
+/* optionally do something like blinking LED */
+void board_hang (void)
+{ while (0) {};}
diff --git a/board/omap2430sdp/platform.S b/board/omap2430sdp/platform.S
new file mode 100644
index 0000000..f221d7e
--- /dev/null
+++ b/board/omap2430sdp/platform.S
@@ -0,0 +1,198 @@
+/*
+ * Board specific setup info
+ *
+ * (C) Copyright 2004-2005
+ * Texas Instruments, <www.ti.com>
+ * Richard Woodruff <r-woodruff2@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <asm/arch/mem.h>
+#include <asm/arch/omap2430.h>
+#include <asm/arch/clocks.h>
+
+_TEXT_BASE:
+ .word TEXT_BASE /* sdram load addr from config.mk */
+
+/**************************************************************************
+ * cpy_clk_code: relocates clock code into SRAM where its safer to execute
+ * R1 = SRAM destination address.
+ *************************************************************************/
+.global cpy_clk_code
+ cpy_clk_code:
+ /* Copy DPLL code into SRAM */
+ adr r0, go_to_speed /* get addr of clock setting code */
+ mov r2, #384 /* r2 size to copy (div by 32 bytes) */
+ mov r1, r1 /* r1 <- dest address (passed in) */
+ add r2, r2, r0 /* r2 <- source end address */
+next2:
+ ldmia r0!, {r3-r10} /* copy from source address [r0] */
+ stmia r1!, {r3-r10} /* copy to target address [r1] */
+ cmp r0, r2 /* until source end address [r2] */
+ bne next2
+ mov pc, lr /* back to caller */
+
+/* ****************************************************************************
+ * go_to_speed: -Moves to bypass, -Commits clock dividers, -puts dpll at speed
+ * -executed from SRAM.
+ * R0 = PRCM_CLKCFG_CTRL - addr of valid reg
+ * R1 = CM_CLKEN_PLL - addr dpll ctlr reg
+ * R2 = dpll value
+ * R3 = CM_IDLEST_CKGEN - addr dpll lock wait
+ ******************************************************************************/
+.global go_to_speed
+ go_to_speed:
+ sub sp, sp, #0x4 /* get some stack space */
+ str r4, [sp] /* save r4's value */
+
+ /* move into fast relock bypass */
+ ldr r8, pll_ctl_add
+ mov r4, #0x2
+ str r4, [r8]
+ ldr r4, pll_stat
+block:
+ ldr r8, [r4] /* wait for bypass to take effect */
+ and r8, r8, #0x3
+ cmp r8, #0x1
+ bne block
+
+ /* set new dpll dividers _after_ in bypass */
+ ldr r4, pll_div_add
+ ldr r8, pll_div_val
+ str r8, [r4]
+
+ /* now prepare GPMC (flash) for new dpll speed */
+ /* flash needs to be stable when we jump back to it */
+ ldr r4, flash_cfg3_addr
+ ldr r8, flash_cfg3_val
+ str r8, [r4]
+ ldr r4, flash_cfg4_addr
+ ldr r8, flash_cfg4_val
+ str r8, [r4]
+ ldr r4, flash_cfg1_addr
+ ldr r8, [r4]
+ orr r8, r8, #0x3 /* up gpmc divider */
+ str r8, [r4]
+
+ /* setup to 2x loop though code. The first loop pre-loads the
+ * icache, the 2nd commits the prcm config, and locks the dpll
+ */
+ mov r4, #0x1000 /* spin spin spin */
+ mov r8, #0x4 /* first pass condition & set registers */
+ cmp r8, #0x4
+2:
+ ldrne r8, [r3] /* DPLL lock check */
+ and r8, r8, #0x7
+ cmp r8, #0x2
+ beq 4f
+3:
+ subeq r8, r8, #0x1
+ streq r8, [r0] /* commit dividers (2nd time) */
+ nop
+lloop1:
+ sub r4, r4, #0x1 /* Loop currently necessary else bad jumps */
+ nop
+ cmp r4, #0x0
+ bne lloop1
+ mov r4, #0x40000
+ cmp r8, #0x1
+ nop
+ streq r2, [r1] /* lock dpll (2nd time) */
+ nop
+lloop2:
+ sub r4, r4, #0x1 /* loop currently necessary else bad jumps */
+ nop
+ cmp r4, #0x0
+ bne lloop2
+ mov r4, #0x40000
+ cmp r8, #0x1
+ nop
+ ldreq r8, [r3] /* get lock condition for dpll */
+ cmp r8, #0x4 /* first time though? */
+ bne 2b
+ moveq r8, #0x2 /* set to dpll check condition. */
+ beq 3b /* if condition not true branch */
+4:
+ ldr r4, [sp]
+ add sp, sp, #0x4 /* return stack space */
+ mov pc, lr /* back to caller, locked */
+
+_go_to_speed: .word go_to_speed
+
+/* these constants need to be close for PIC code */
+#ifdef CFG_ONENAND
+flash_cfg3_addr:
+ .word GPMC_CONFIG3_0
+flash_cfg3_val:
+ .word ONENAND_GPMC_CONFIG3
+flash_cfg4_addr:
+ .word GPMC_CONFIG4_0
+flash_cfg4_val:
+ .word ONENAND_GPMC_CONFIG4
+flash_cfg1_addr:
+ .word GPMC_CONFIG1_0
+#else
+flash_cfg3_addr:
+ .word GPMC_CONFIG3_0
+flash_cfg3_val:
+ .word SMNAND_GPMC_CONFIG3
+flash_cfg4_addr:
+ .word GPMC_CONFIG4_0
+flash_cfg4_val:
+ .word SMNAND_GPMC_CONFIG4
+flash_cfg1_addr:
+ .word GPMC_CONFIG1_0
+#endif
+pll_ctl_add:
+ .word CM_CLKEN_PLL
+pll_stat:
+ .word CM_IDLEST_CKGEN
+pll_div_add:
+ .word CM_CLKSEL1_PLL
+pll_div_val:
+ .word DPLL_VAL /* DPLL setting (300MHz default) */
+
+.globl platformsetup
+platformsetup:
+ ldr sp, SRAM_STACK
+ str ip, [sp] /* stash old link register */
+ mov ip, lr /* save link reg across call */
+ bl s_init /* go setup pll,mux,memory */
+ ldr ip, [sp] /* restore save ip */
+ mov lr, ip /* restore link reg */
+
+ /* map interrupt controller */
+ ldr r0, VAL_INTH_SETUP
+ mcr p15, 0, r0, c15, c2, 4
+
+ /* back to arch calling code */
+ mov pc, lr
+
+ /* the literal pools origin */
+ .ltorg
+
+REG_CONTROL_STATUS:
+ .word CONTROL_STATUS
+VAL_INTH_SETUP:
+ .word PERIFERAL_PORT_BASE
+SRAM_STACK:
+ .word LOW_LEVEL_SRAM_STACK
+
diff --git a/board/omap2430sdp/x-load.lds b/board/omap2430sdp/x-load.lds
new file mode 100644
index 0000000..f12e8f8
--- /dev/null
+++ b/board/omap2430sdp/x-load.lds
@@ -0,0 +1,54 @@
+/*
+ * January 2004 - Changed to support H4 device
+ * Copyright (c) 2004-2005 Texas Instruments
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+ . = 0x00000000;
+
+ . = ALIGN(4);
+ .text :
+ {
+ cpu/arm1136/start.o (.text)
+ *(.text)
+ }
+
+ . = ALIGN(4);
+ .rodata : { *(.rodata) }
+
+ . = ALIGN(4);
+ .data : { *(.data) }
+
+ . = ALIGN(4);
+ .got : { *(.got) }
+
+ . = ALIGN(4);
+ __bss_start = .;
+ .bss : { *(.bss) }
+ _end = .;
+}