diff options
Diffstat (limited to 'x-loader/board/omap1710h3/omap1710h3.c')
| -rw-r--r-- | x-loader/board/omap1710h3/omap1710h3.c | 89 |
1 files changed, 0 insertions, 89 deletions
diff --git a/x-loader/board/omap1710h3/omap1710h3.c b/x-loader/board/omap1710h3/omap1710h3.c deleted file mode 100644 index 245cfe2..0000000 --- a/x-loader/board/omap1710h3/omap1710h3.c +++ /dev/null @@ -1,89 +0,0 @@ -/* - * (C) Copyright 2004 - * Texas Instruments, <www.ti.com> - * Jian Zhang <jzhang@ti.com> - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger <mgroeger@sysgo.de> - * - * (C) Copyright 2002 - * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#if defined(CONFIG_OMAP1710) -#include <./configs/omap1510.h> -#endif - -#define COMP_MODE_ENABLE ((unsigned int)0x0000EAEF) - -int board_init (void) -{ -#ifdef CFG_PRINTF - - /* setup for UART1 */ - *(volatile unsigned int *) ((unsigned int)FUNC_MUX_CTRL_0) &= ~(0x02000000); /* bit 25 */ - /* bit 29 for UART1 */ - *(volatile unsigned int *) ((unsigned int)MOD_CONF_CTRL_0) &= ~(0x00002000); - - /* Enable the power for UART1 */ -#define UART1_48MHZ_ENABLE ((unsigned short)0x0200) -#define SW_CLOCK_REQUEST 0xFFFE0834 - *((volatile unsigned short *)SW_CLOCK_REQUEST) |= UART1_48MHZ_ENABLE; - -#endif - - *(volatile unsigned int *) ((unsigned int)COMP_MODE_CTRL_0) = COMP_MODE_ENABLE; - return 0; -} - -#define GPIO1_DIRECTION 0xFFFBE434 -#define FUNC_MUX_CTRL_F 0xFFFE1094 -#define PU_PD_SEL_4 0xFFFE10C4 -/* - * On H3 board, Nand R/B is tied to GPIO_10 - * We setup this GPIO pin - */ -int nand_init (void) -{ - - /* GPIO_10 for input. it is in GPIO1 module */ - *(volatile unsigned int *) ((unsigned int)GPIO1_DIRECTION) |= 0x0400; - - /* GPIO10 Func_MUX_CTRL reg bit 29:27, Configure V2 to mode1 as GPIO */ - *(volatile unsigned int *) ((unsigned int)FUNC_MUX_CTRL_F) &= 0xC7FFFFFF; - *(volatile unsigned int *) ((unsigned int)FUNC_MUX_CTRL_F) |= 0x08000000; - - /* GPIO10 pullup/down register, Enable pullup on GPIO10 */ - *(volatile unsigned int *) ((unsigned int)PU_PD_SEL_4) |= 0x08; - - if (nand_chip()){ - printf("Unsupported Chip!\n"); - return 1; - } - return 0; -} - -/* optionally do something like blinking LED */ -void board_hang (void) -{} - |