aboutsummaryrefslogtreecommitdiffstats
path: root/x-loader/board/omap2420h4
diff options
context:
space:
mode:
Diffstat (limited to 'x-loader/board/omap2420h4')
m---------x-loader0
-rw-r--r--x-loader/board/omap2420h4/Makefile47
-rw-r--r--x-loader/board/omap2420h4/config.mk26
-rw-r--r--x-loader/board/omap2420h4/omap2420h4.c598
-rw-r--r--x-loader/board/omap2420h4/platform.S218
-rw-r--r--x-loader/board/omap2420h4/x-load.lds54
6 files changed, 943 insertions, 0 deletions
diff --git a/x-loader b/x-loader
deleted file mode 160000
-Subproject 1c9276af4d6a5b7014a7630a1abeddf3b317756
diff --git a/x-loader/board/omap2420h4/Makefile b/x-loader/board/omap2420h4/Makefile
new file mode 100644
index 0000000..c72e36b
--- /dev/null
+++ b/x-loader/board/omap2420h4/Makefile
@@ -0,0 +1,47 @@
+#
+# (C) Copyright 2000, 2001, 2002
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = lib$(BOARD).a
+
+OBJS := omap2420h4.o
+SOBJS := platform.o
+
+$(LIB): $(OBJS) $(SOBJS)
+ $(AR) crv $@ $^
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+ $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+-include .depend
+
+#########################################################################
diff --git a/x-loader/board/omap2420h4/config.mk b/x-loader/board/omap2420h4/config.mk
new file mode 100644
index 0000000..1c770f3
--- /dev/null
+++ b/x-loader/board/omap2420h4/config.mk
@@ -0,0 +1,26 @@
+#
+# (C) Copyright 2004
+# Texas Instruments, <www.ti.com>
+#
+# TI H4 board with OMAP2420 (ARM1136) cpu
+# see http://www.ti.com/ for more information on Texas Instruments
+#
+# H4 has 1 bank of 32MB or 64MB mDDR-SDRAM on CS0
+# H4 has 1 bank of 32MB or 00MB mDDR-SDRAM on CS1
+# Physical Address:
+# 8000'0000 (bank0)
+# A000/0000 (bank1) ES2 will be configurable
+# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000
+# (mem base + reserved)
+
+# For use with external or internal boots.
+# CONFIG_PARTIAL_SRAM must be defined to use this.
+TEXT_BASE = 0x80e80000
+
+# Used with full SRAM boot.
+# This is either with a GP system or a signed boot image.
+# easiest, and safest way to go if you can.
+# Comment out //CONFIG_PARTIAL_SRAM for this one.
+#
+#TEXT_BASE = 0x40280000
+
diff --git a/x-loader/board/omap2420h4/omap2420h4.c b/x-loader/board/omap2420h4/omap2420h4.c
new file mode 100644
index 0000000..ef81b49
--- /dev/null
+++ b/x-loader/board/omap2420h4/omap2420h4.c
@@ -0,0 +1,598 @@
+/*
+ * Copyright (C) 2005 Texas Instruments.
+ * Jian Zhang <jzhang@ti.com>
+ * Richard Woodruff <r-woodruff2@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <asm/arch/omap2420.h>
+#include <asm/arch/bits.h>
+
+#include <asm/arch/mem.h>
+#include <asm/arch/sys_info.h>
+#include <asm/arch/clocks.h>
+
+static void wait_for_command_complete(unsigned int wd_base);
+static void watchdog_init(void);
+static void peripheral_enable(void);
+static void muxSetupUART1(void);
+static u32 get_cpu_rev(void);
+
+
+/*******************************************************
+ * Routine: delay
+ * Description: spinning delay to use before udelay works
+ ******************************************************/
+static inline void delay (unsigned long loops)
+{
+ __asm__ volatile ("1:\n"
+ "subs %0, %1, #1\n"
+ "bne 1b":"=r" (loops):"0" (loops));
+}
+
+/*****************************************
+ * Routine: board_init
+ * Description: Early hardware init.
+ *****************************************/
+int board_init (void)
+{
+ return 0;
+}
+
+#ifdef CFG_SDRAM_DDR
+void
+config_sdram_ddr(u32 rev)
+{
+ /* ball D11, mode 0 */
+ __raw_writeb(0x08, 0x48000032);
+
+ /* SDRC_CS0 Configuration */
+ if (rev == CPU_2420_2422_ES1) {
+ __raw_writel(H4_2422_SDRC_MDCFG_0_DDR, SDRC_MCFG_0);
+ __raw_writel(H4_2422_SDRC_SHARING, SDRC_SHARING);
+ } else {
+ __raw_writel(H4_2420_SDRC_MDCFG_0_DDR, SDRC_MCFG_0);
+ __raw_writel(H4_2420_SDRC_SHARING, SDRC_SHARING);
+ }
+
+ __raw_writel(H4_242x_SDRC_RFR_CTRL_ES1, SDRC_RFR_CTRL);
+ __raw_writel(H4_242x_SDRC_ACTIM_CTRLA_0_ES1, SDRC_ACTIM_CTRLA_0);
+ __raw_writel(H4_242x_SDRC_ACTIM_CTRLB_0_ES1, SDRC_ACTIM_CTRLB_0);
+
+ /* Manual Command sequence */
+ __raw_writel(CMD_NOP, SDRC_MANUAL_0);
+ __raw_writel(CMD_PRECHARGE, SDRC_MANUAL_0);
+ __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_0);
+ __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_0);
+
+
+ /*
+ * CS0 SDRC Mode Register
+ * Burst length = 4 - DDR memory
+ * Serial mode
+ * CAS latency = 3
+ */
+ __raw_writel(0x00000032, SDRC_MR_0);
+
+ /* SDRC DLLA control register */
+ /* Delay is 90 degrees */
+ if (rev == CPU_2420_2422_ES1) {
+ /* Enable DLL, Load counter with 115 (middle of range) */
+ __raw_writel(0x00000002, SDRC_DLLA_CTRL);
+ /* Enable DLL, Load counter with 128 (middle of range) */
+ __raw_writel(0x00000002, SDRC_DLLB_CTRL);
+ } else {
+ /* Enable DLL, Load counter with 115 (middle of range) */
+ __raw_writel(0x00000008, SDRC_DLLA_CTRL); // ES2.x
+ /* Enable DLL, Load counter with 128 (middle of range) */
+ __raw_writel(0x00000008, SDRC_DLLB_CTRL); // ES2.x
+ }
+
+}
+#endif // CFG_SDRAM_DDR
+
+
+#ifdef CFG_SDRAM_COMBO
+void
+config_sdram_combo(u32 rev)
+{
+
+ u32 dllctrl=0;
+
+ /* ball C12, mode 0 */
+ __raw_writeb(0x00, 0x480000a1);
+ /* ball D11, mode 0 */
+ __raw_writeb(0x00, 0x48000032);
+ /* ball B13, mode 0 - for CKE1 (not needed rkw for combo) */
+ __raw_writeb(0x00, 0x480000a3);
+
+ /*configure sdrc 32 bit for COMBO ddr sdram. Issue soft reset */
+ __raw_writel(0x00000012, SDRC_SYSCONFIG);
+ delay(200000);
+ __raw_writel(0x00000010, SDRC_SYSCONFIG);
+
+ /* SDRCTriState: no Tris */
+ /* CS0MuxCfg: 000 (32-bit SDRAM on D31..0) */
+ __raw_writel(H4_2420_SDRC_SHARING, SDRC_SHARING);
+
+
+ /* CS0 SDRC Memory Configuration, */
+ /* DDR-SDRAM, External SDRAM is x32bit, */
+ /* Configure to MUX9: 1x8Mbx32 */
+ __raw_writel(H4_2420_COMBO_MDCFG_0_DDR, SDRC_MCFG_0);
+ __raw_writel(H4_2420_SDRC_ACTIM_CTRLA_0, SDRC_ACTIM_CTRLA_0);
+ __raw_writel(H4_2420_SDRC_ACTIM_CTRLB_0, SDRC_ACTIM_CTRLB_0);
+ __raw_writel(H4_242x_SDRC_RFR_CTRL_ES1, SDRC_RFR_CTRL);
+
+ /* Manual Command sequence */
+ __raw_writel(CMD_NOP, SDRC_MANUAL_0);
+ __raw_writel(CMD_PRECHARGE, SDRC_MANUAL_0);
+ __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_0);
+ __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_0);
+
+ /* CS0 SDRC Mode Register */
+ /* Burst length = 4 - DDR memory */
+ /* Serial mode */
+ /* CAS latency = 3 */
+ __raw_writel(H4_2422_SDRC_MR_0_DDR, SDRC_MR_0);
+
+ /* CS1 SDRC Memory Configuration, */
+ /* DDR-SDRAM, External SDRAM is x32bit, */
+ /* Configure to MUX9: 1x8Mbx32 */
+ __raw_writel(H4_2420_COMBO_MDCFG_0_DDR, SDRC_MCFG_1);
+ __raw_writel(H4_242X_SDRC_ACTIM_CTRLA_0_100MHz, SDRC_ACTIM_CTRLA_1);
+ __raw_writel(H4_2420_SDRC_ACTIM_CTRLB_0, SDRC_ACTIM_CTRLB_1);
+ __raw_writel(H4_242x_SDRC_RFR_CTRL_ES1, 0x680090d4);
+
+ /* Manual Command sequence */
+ __raw_writel(CMD_NOP, SDRC_MANUAL_1);
+ __raw_writel(CMD_PRECHARGE, SDRC_MANUAL_1);
+ __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_1);
+ __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_1);
+
+ /* CS1 SDRC Mode Register */
+ /* Burst length = 4 - DDR memory */
+ /* Serial mode */
+ /* CAS latency = 3 */
+ __raw_writel(H4_2422_SDRC_MR_0_DDR, SDRC_MR_1);
+
+ /* SDRC DLLA control register */
+ /* Delay is 90 degrees */
+ if (rev == CPU_242X_ES1)
+ dllctrl = (BIT0|BIT3);
+ else
+ dllctrl = BIT0;
+
+ if (rev == CPU_2420_2422_ES1) {
+ /* Enable DLL, Load counter with 115 (middle of range) */
+ __raw_writel(0x00007306, SDRC_DLLA_CTRL);
+ __raw_writel(0x00007302, SDRC_DLLA_CTRL);
+ /* Enable DLL, Load counter with 128 (middle of range) */
+ __raw_writel(0x00007306, SDRC_DLLB_CTRL); /* load ctr value */
+ __raw_writel(0x00007302, SDRC_DLLB_CTRL); /* lock and go */
+ }
+ else {
+ /* Enable DLL, Load counter with 115 (middle of range) */
+ __raw_writel(H4_2420_SDRC_DLLAB_CTRL, SDRC_DLLA_CTRL); // ES2.x
+ __raw_writel(H4_2420_SDRC_DLLAB_CTRL & ~(LOADDLL|dllctrl), SDRC_DLLA_CTRL); // ES2.x
+ __raw_writel(H4_2420_SDRC_DLLAB_CTRL, SDRC_DLLB_CTRL); // ES2.x ?
+ __raw_writel(H4_2420_SDRC_DLLAB_CTRL & ~(LOADDLL|dllctrl), SDRC_DLLB_CTRL); // ES2.x
+ }
+}
+
+#endif // CFG_SDRAM_COMBO
+
+#ifdef CFG_SDRAM_SDR
+void
+config_sdram_sdr(u32 rev)
+{
+ u32 dllctrl=0;
+
+ /* ball D11, mode 0 */
+ __raw_writeb(0x00, 0x48000032);
+
+ __raw_writel(0x00000012, SDRC_SYSCONFIG);
+ delay(200000);
+ __raw_writel(0x00000010, SDRC_SYSCONFIG);
+
+ /* Chip-level shared interface management */
+ /* SDRCTriState: no Tris */
+ /* CS0MuxCfg: 000 (32-bit SDRAM on D31..0) */
+ /* CS1MuxCfg: 000 (32-bit SDRAM on D31..0) */
+ if (rev == CPU_2420_2422_ES1)
+ __raw_writel(H4_2422_SDRC_SHARING, SDRC_SHARING);
+ else
+ __raw_writel(H4_2420_SDRC_SHARING, SDRC_SHARING);
+
+ /* CS0 SDRC Memory Configuration, */
+ /* DDR-SDRAM, External SDRAM is x32bit, */
+ /* Configure to MUX14: 32Mbx32 */
+ __raw_writel(H4_2420_SDRC_MDCFG_0_SDR, SDRC_MCFG_0); /* diff from combo case */
+ __raw_writel(H4_2420_SDRC_ACTIM_CTRLA_0, SDRC_ACTIM_CTRLA_0);
+ __raw_writel(H4_2420_SDRC_ACTIM_CTRLB_0, SDRC_ACTIM_CTRLB_0);
+ __raw_writel(H4_242x_SDRC_RFR_CTRL_ES1, SDRC_RFR_CTRL);
+
+ /* Manual Command sequence */
+ __raw_writel(CMD_NOP, SDRC_MANUAL_0);
+ __raw_writel(CMD_PRECHARGE, SDRC_MANUAL_0);
+ __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_0);
+ __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_0);
+
+ /* CS0 SDRC Mode Register */
+ /* Burst length = 2 - SDR memory */
+ /* Serial mode */
+ /* CAS latency = 3 */
+ __raw_writel(H4_2420_SDRC_MR_0_SDR, SDRC_MR_0); /* diff from combo case */
+
+ /* SDRC DLLA control register */
+ /* Enable DLL, Load counter with 115 (middle of range) */
+ /* Delay is 90 degrees */
+
+ if (rev == CPU_242X_ES1)
+ dllctrl = (BIT0|BIT3);
+ else
+ dllctrl = BIT0;
+
+ if (rev == CPU_2420_2422_ES1) {
+ __raw_writel(0x00007306, SDRC_DLLA_CTRL);
+ __raw_writel(0x00007302, SDRC_DLLA_CTRL);
+ /* Enable DLL, Load counter with 128 (middle of range) */
+ __raw_writel(0x00007306, SDRC_DLLB_CTRL); /* load ctr value */
+ __raw_writel(0x00007302, SDRC_DLLB_CTRL); /* lock and go */
+ }
+ else {
+ __raw_writel(H4_2420_SDRC_DLLAB_CTRL, SDRC_DLLA_CTRL); // ES2.x
+ __raw_writel(H4_2420_SDRC_DLLAB_CTRL & ~(LOADDLL|dllctrl), SDRC_DLLA_CTRL); // ES2.x
+ /* Enable DLL, Load counter with 128 (middle of range) */
+ __raw_writel(H4_2420_SDRC_DLLAB_CTRL, SDRC_DLLB_CTRL); // ES2.x
+ __raw_writel(H4_2420_SDRC_DLLAB_CTRL & ~(LOADDLL|dllctrl), SDRC_DLLB_CTRL); // ES2.x
+ }
+
+}
+#endif // CFG_SDRAM_SDR
+
+#ifdef CFG_SDRAM_STACKED
+void
+config_sdram_stacked(u32 rev)
+{
+
+ /* Pin Muxing for SDRC */
+ __raw_writeb(0x00, 0x480000a1); /* mux mode 0 (CS1) */
+ __raw_writeb(0x00, 0x480000a3); /* mux mode 0 (CKE1) */
+ __raw_writeb(0x00, 0x48000032); /* connect sdrc_a12 */
+ __raw_writeb(0x00, 0x48000031); /* connect sdrc_a13 */
+
+ /* configure sdrc 32 bit for COMBO ddr sdram */
+ __raw_writel(0x00000010, SDRC_SYSCONFIG); /* no idle ack and RESET enable */
+ delay(200000);
+ __raw_writel(0x00000010, SDRC_SYSCONFIG); /* smart idle mode */
+
+ /* SDRC_SHARING */
+ /* U-boot is writing 0x00000100 though (H4_2420_SDRC_SHARING ) */
+ //__raw_writel(H4_2420_SDRC_SHARING, SDRC_SHARING);
+
+ __raw_writel(0x00004900, SDRC_SHARING);
+
+ /* SDRC_CS0 Configuration */
+ /* None for ES2.1 */
+
+ /* SDRC_CS1 Configuration */
+ __raw_writel(0x00000000, SDRC_CS_CFG); /* Remap CS1 to 0x80000000 */
+
+ /* Disable power down of CKE */
+ __raw_writel(0x00000085, SDRC_POWER);
+
+ __raw_writel(0x01A02019, SDRC_MCFG_1); /* SDRC_MCFG1 */
+ __raw_writel(0x0003DD03, SDRC_RFR_CTRL1); /* SDRC_RFR_CTRL1 */
+ __raw_writel(0x92DDC485, SDRC_ACTIM_CTRLA_1); /* SDRC_ACTIM_CTRLA0 */
+ __raw_writel(0x00000014, SDRC_ACTIM_CTRLB_1); /* SDRC_ACTIM_CTRLB0 */
+
+ /*Manual Command sequence */
+ __raw_writel(CMD_NOP, SDRC_MANUAL_1);
+ __raw_writel(CMD_PRECHARGE, SDRC_MANUAL_1);
+ __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_1);
+ __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_1);
+
+ /* CS0 SDRC Mode Register */
+ /* Burst length = 4 - DDR memory */
+ /* Serial mode */
+ /* CAS latency = 3 */
+ __raw_writel(0x00000032, SDRC_MR_1);
+ __raw_writel(0x00000020, SDRC_EMR2_1); /* weak-strength driver */
+
+ /* SDRC DLLA control register */
+ /* Delay is 90 degrees */
+ if (rev == CPU_2420_2422_ES1) {
+ /* Enable DLL, Load counter with 115 (middle of range) */
+ __raw_writel(0x00007302, SDRC_DLLA_CTRL);
+ /* Enable DLL, Load counter with 128 (middle of range) */
+ __raw_writel(0x00007302, SDRC_DLLB_CTRL);
+ }
+ else {
+ /* Enable DLL, Load counter with 115 (middle of range) */
+ __raw_writel(0x00003108, SDRC_DLLA_CTRL); // ES2.x
+ /* Enable DLL, Load counter with 128 (middle of range) */
+ __raw_writel(0x00003108, SDRC_DLLB_CTRL); // ES2.x
+ }
+}
+#endif // CFG_SDRAM_STACKED
+
+/**********************************************************
+ * Routine: s_init
+ * Description: Does early system init of muxing and clocks.
+ * - Called at time when only stack is available.
+ **********************************************************/
+int s_init(int skip)
+{
+ u32 rev;
+
+ rev = get_cpu_rev();
+
+ watchdog_init();
+ muxSetupUART1();
+ delay(100);
+
+ /*DPLL out = 2x DPLL --> core clock */
+ __raw_writel(DPLL_OUT, CM_CLKSEL2_PLL);
+
+ /*DPLL into low power bypass (others off) */
+ __raw_writel(0x00000001, CM_CLKEN_PLL);
+
+ /*MPU core clock = Core /2 = 300 */
+ __raw_writel(MPU_DIV, CM_CLKSEL_MPU);
+
+ /*DSPif=200, DSPif=100, IVA=200 */
+ __raw_writel(DSP_DIV, CM_CLKSEL_DSP);
+
+ /*GFX clock (L3/2) 50MHz */
+ __raw_writel(GFX_DIV, CM_CLKSEL_GFX);
+
+ /*L3=100, L4=100, DisplaySS=50 Vlync=96Mhz,ssi=100, usb=50 */
+ __raw_writel(BUS_DIV, CM_CLKSEL1_CORE);
+
+ /*12MHz apll src, 12/(1+1)*50=300 */
+ __raw_writel(DPLL_VAL, CM_CLKSEL1_PLL);
+
+ /*Valid the configuration */
+ __raw_writel(0x00000001, PRCM_CLKCFG_CTRL);
+ delay(1000);
+
+ /*Enable DPLL=300, 96MHz APLL locked. */
+ __raw_writel(0x0000000F, CM_CLKEN_PLL);
+ delay(200000);
+
+#ifdef CFG_SDRAM_DDR
+ config_sdram_ddr(rev);
+#elif defined(CFG_SDRAM_COMBO)
+ config_sdram_combo(rev);
+#elif defined(CFG_SDRAM_SDR)
+ config_sdram_sdr(rev);
+#elif defined(CFG_SDRAM_STACKED)
+ config_sdram_stacked(rev);
+#else
+#error SDRAM type not supported
+#endif
+
+ delay(20000);
+ peripheral_enable();
+ return(0);
+}
+
+/*******************************************************
+ * Routine: misc_init_r
+ * Description: Init ethernet (done here so udelay works)
+ ********************************************************/
+int misc_init_r (void)
+{
+ return(0);
+}
+
+/****************************************
+ * Routine: watchdog_init
+ * Description: Shut down watch dogs
+ *****************************************/
+static void watchdog_init(void)
+{
+#define GP (BIT8|BIT9)
+
+ /* There are 4 watch dogs. 1 secure, and 3 general purpose.
+ * I would expect that the ROM takes care of the secure one,
+ * but we will try also. Of the 3 GP ones, 1 can reset us
+ * directly, the other 2 only generate MPU interrupts.
+ */
+ __raw_writel(WD_UNLOCK1 ,WD2_BASE+WSPR);
+ wait_for_command_complete(WD2_BASE);
+ __raw_writel(WD_UNLOCK2 ,WD2_BASE+WSPR);
+
+#if MPU_WD_CLOCKED /* value 0x10 stick on aptix, BIT4 polarity seems oppsite*/
+ __raw_writel(WD_UNLOCK1 ,WD3_BASE+WSPR);
+ wait_for_command_complete(WD3_BASE);
+ __raw_writel(WD_UNLOCK2 ,WD3_BASE+WSPR);
+
+ __raw_writel(WD_UNLOCK1 ,WD4_BASE+WSPR);
+ wait_for_command_complete(WD4_BASE);
+ __raw_writel(WD_UNLOCK2 ,WD4_BASE+WSPR);
+#endif
+
+}
+
+/******************************************************
+ * Routine: wait_for_command_complete
+ * Description: Wait for posting to finish on watchdog
+ ******************************************************/
+static void wait_for_command_complete(unsigned int wd_base)
+{
+ int pending = 1;
+ do {
+ pending = __raw_readl(wd_base+WWPS);
+ } while (pending);
+}
+
+
+/**********************************************
+ * Routine: dram_init
+ * Description: sets uboots idea of sdram size
+ **********************************************/
+int dram_init (void)
+{
+ return 0;
+}
+
+/*****************************************************************
+ * Routine: peripheral_enable
+ * Description: Enable the clks & power for perifs (GPT2, UART1,...)
+ ******************************************************************/
+static void peripheral_enable(void)
+{
+ unsigned int v, if_clks=0, func_clks=0;
+
+ /* Enable GP2 timer.*/
+ if_clks |= BIT4;
+ func_clks |= BIT4;
+ v = __raw_readl(CM_CLKSEL2_CORE) | 0x4; /* Sys_clk input OMAP2420_GPT2 */
+ __raw_writel(v, CM_CLKSEL2_CORE);
+ __raw_writel(0x1, CM_CLKSEL_WKUP);
+
+#ifdef CFG_NS16550
+ /* Enable UART1 clock */
+ func_clks |= BIT21;
+ if_clks |= BIT21;
+#endif
+ v = __raw_readl(CM_ICLKEN1_CORE) | if_clks; /* Interface clocks on */
+ __raw_writel(v,CM_ICLKEN1_CORE );
+ v = __raw_readl(CM_FCLKEN1_CORE) | func_clks; /* Functional Clocks on */
+ __raw_writel(v, CM_FCLKEN1_CORE);
+ delay(1000);
+
+#ifndef KERNEL_UPDATED
+ {
+#define V1 0xffffffff
+#define V2 0x00000007
+
+ __raw_writel(V1, CM_FCLKEN1_CORE);
+ __raw_writel(V2, CM_FCLKEN2_CORE);
+ __raw_writel(V1, CM_ICLKEN1_CORE);
+ __raw_writel(V1, CM_ICLKEN2_CORE);
+ }
+#endif
+
+}
+
+/* Pin Muxing registers used for UART1 */
+#define CONTROL_PADCONF_UART1_CTS ((volatile unsigned char *)0x480000C5)
+#define CONTROL_PADCONF_UART1_RTS ((volatile unsigned char *)0x480000C6)
+#define CONTROL_PADCONF_UART1_TX ((volatile unsigned char *)0x480000C7)
+#define CONTROL_PADCONF_UART1_RX ((volatile unsigned char *)0x480000C8)
+/****************************************
+ * Routine: muxSetupUART1 (ostboot)
+ * Description: Set up uart1 muxing
+ *****************************************/
+static void muxSetupUART1(void)
+{
+ volatile unsigned char *MuxConfigReg;
+
+ /* UART1_CTS pin configuration, PIN = D21 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_UART1_CTS;
+ *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
+
+ /* UART1_RTS pin configuration, PIN = H21 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_UART1_RTS;
+ *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
+
+ /* UART1_TX pin configuration, PIN = L20 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_UART1_TX;
+ *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
+
+ /* UART1_RX pin configuration, PIN = T21 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_UART1_RX;
+ *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
+}
+
+int nand_init(void)
+{
+ u32 rev;
+
+ rev = get_cpu_rev();
+
+
+ /* GPMC pin muxing */
+ (*(volatile int*)0x48000070) &= 0x000000FF;
+ (*(volatile int*)0x48000074) &= 0x00000000;
+ (*(volatile int*)0x48000078) &= 0x00000000;
+ (*(volatile int*)0x4800007C) &= 0x00000000;
+ (*(volatile int*)0x48000080) &= 0xFF000000;
+
+ /* GPMC_IO_DIR */
+ (*(volatile int*)0x4800008C) = 0x19000000;
+
+ /* GPMC Configuration */
+ (*(volatile int*)0x6800A010) = 0x0000000A;
+ while (((*(volatile int *)0x6800A014) & 0x00000001) == 0);
+
+ (*(volatile int*)0x6800A050) = 0x00000001;
+ (*(volatile int*)0x6800A060) = 0x00001800;
+ (*(volatile int*)0x6800A064) = 0x00141400;
+ (*(volatile int*)0x6800A068) = 0x00141400;
+ (*(volatile int*)0x6800A06C) = 0x0F010F01;
+ (*(volatile int*)0x6800A070) = 0x010C1414;
+ (*(volatile int*)0x6800A074) = 0x00000A80;
+ (*(volatile int*)0x6800A078) = 0x00000C44; //base 0x04000000
+
+ (*(volatile int*)0x6800A0A8) = 0x00000000;
+ delay(1000);
+#ifdef CFG_SDRAM_STACKED
+ (*(volatile int*)0x6800A090) = 0x00011000;
+#else
+ (*(volatile int*)0x6800A090) = 0x00011200;
+#endif
+ (*(volatile int*)0x6800A094) = 0x001f1f00;
+ (*(volatile int*)0x6800A098) = 0x00080802;
+ (*(volatile int*)0x6800A09C) = 0x1C091C09;
+ (*(volatile int*)0x6800A0A0) = 0x031A1F1F;
+ (*(volatile int*)0x6800A0A4) = 0x000003C2;
+ (*(volatile int*)0x6800A0A8) = 0x00000F48;
+
+ if (rev != CPU_2420_2422_ES1)
+ (*(volatile int*)0x6800A040) = 0x1FF0; // es2.x
+
+ if (nand_chip()){
+ printf("Unsupported Chip!\n");
+ return 1;
+ }
+ return 0;
+}
+
+/******************************************
+ * get_cpu_rev(void) - extract version info
+ ******************************************/
+u32 get_cpu_rev(void)
+{
+ u32 v;
+ v = __raw_readl(TAP_IDCODE_REG);
+ v = v >> 28;
+ return(v+1); /* currently 2422 and 2420 match up */
+}
+
+/* optionally do something like blinking LED */
+void board_hang (void)
+{}
+
+
+
diff --git a/x-loader/board/omap2420h4/platform.S b/x-loader/board/omap2420h4/platform.S
new file mode 100644
index 0000000..5cc37e5
--- /dev/null
+++ b/x-loader/board/omap2420h4/platform.S
@@ -0,0 +1,218 @@
+/*
+ * Board specific setup info
+ *
+ * (C) Copyright 2004
+ * Texas Instruments, <www.ti.com>
+ * Richard Woodruff <r-woodruff2@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <asm/arch/omap2420.h>
+#include <asm/arch/mem.h>
+#include <asm/arch/clocks.h>
+
+_TEXT_BASE:
+ .word TEXT_BASE /* sdram load addr from config.mk */
+
+#ifdef CONFIG_PARTIAL_SRAM
+
+/**************************************************************************
+ * cpy_clk_code: relocates clock code into SRAM where its safer to execute
+ * R1 = SRAM destination address.
+ *************************************************************************/
+.global cpy_clk_code
+ cpy_clk_code:
+ /* Copy DPLL code into SRAM */
+ adr r0, go_to_speed /* get addr of clock setting code */
+ mov r2, #384 /* r2 size to copy (div by 32 bytes) */
+ mov r1, r1 /* r1 <- dest address (passed in) */
+ add r2, r2, r0 /* r2 <- source end address */
+next2:
+ ldmia r0!, {r3-r10} /* copy from source address [r0] */
+ stmia r1!, {r3-r10} /* copy to target address [r1] */
+ cmp r0, r2 /* until source end address [r2] */
+ bne next2
+ mov pc, lr /* back to caller */
+
+/* ****************************************************************************
+ * go_to_speed: -Moves to bypass, -Commits clock dividers, -puts dpll at speed
+ * -executed from SRAM.
+ * R0 = PRCM_CLKCFG_CTRL - addr of valid reg
+ * R1 = CM_CLKEN_PLL - addr dpll ctlr reg
+ * R2 = dpll value
+ * R3 = CM_IDLEST_CKGEN - addr dpll lock wait
+ ******************************************************************************/
+.global go_to_speed
+ go_to_speed:
+ sub sp, sp, #0x4 /* get some stack space */
+ str r4, [sp] /* save r4's value */
+
+ /* move into fast relock bypass */
+ ldr r8, pll_ctl_add
+ mov r4, #0x2
+ str r4, [r8]
+ ldr r4, pll_stat
+block:
+ ldr r8, [r4] /* wait for bypass to take effect */
+ and r8, r8, #0x3
+ cmp r8, #0x1
+ bne block
+
+ /* set new dpll dividers _after_ in bypass */
+ ldr r4, pll_div_add
+ ldr r8, pll_div_val
+ str r8, [r4]
+
+ /* now prepare GPMC (flash) for new dpll speed */
+ /* flash needs to be stable when we jump back to it */
+ ldr r4, cfg3_0_addr
+ ldr r8, cfg3_0_val
+ str r8, [r4]
+ ldr r4, cfg4_0_addr
+ ldr r8, cfg4_0_val
+ str r8, [r4]
+ ldr r4, cfg1_0_addr
+ ldr r8, [r4]
+ orr r8, r8, #0x3 /* up gpmc divider */
+ str r8, [r4]
+
+ /* setup to 2x loop though code. The first loop pre-loads the
+ * icache, the 2nd commits the prcm config, and locks the dpll
+ */
+ mov r4, #0x1000 /* spin spin spin */
+ mov r8, #0x4 /* first pass condition & set registers */
+ cmp r8, #0x4
+2:
+ ldrne r8, [r3] /* DPLL lock check */
+ and r8, r8, #0x7
+ cmp r8, #0x2
+ beq 4f
+3:
+ subeq r8, r8, #0x1
+ streq r8, [r0] /* commit dividers (2nd time) */
+ nop
+lloop1:
+ sub r4, r4, #0x1 /* Loop currently necessary else bad jumps */
+ nop
+ cmp r4, #0x0
+ bne lloop1
+ mov r4, #0x40000
+ cmp r8, #0x1
+ nop
+ streq r2, [r1] /* lock dpll (2nd time) */
+ nop
+lloop2:
+ sub r4, r4, #0x1 /* loop currently necessary else bad jumps */
+ nop
+ cmp r4, #0x0
+ bne lloop2
+ mov r4, #0x40000
+ cmp r8, #0x1
+ nop
+ ldreq r8, [r3] /* get lock condition for dpll */
+ cmp r8, #0x4 /* first time though? */
+ bne 2b
+ moveq r8, #0x2 /* set to dpll check condition. */
+ beq 3b /* if condition not true branch */
+4:
+ ldr r4, [sp]
+ add sp, sp, #0x4 /* return stack space */
+ mov pc, lr /* back to caller, locked */
+
+_go_to_speed: .word go_to_speed
+
+/* these constants need to be close for PIC code */
+cfg3_0_addr:
+ .word GPMC_CONFIG3_0
+cfg3_0_val:
+ .word SMNAND_GPMC_CONFIG3
+cfg4_0_addr:
+ .word GPMC_CONFIG4_0
+cfg4_0_val:
+ .word SMNAND_GPMC_CONFIG4
+cfg1_0_addr:
+ .word GPMC_CONFIG1_0
+pll_ctl_add:
+ .word CM_CLKEN_PLL
+pll_stat:
+ .word CM_IDLEST_CKGEN
+pll_div_add:
+ .word CM_CLKSEL1_PLL
+pll_div_val:
+ .word DPLL_VAL /* DPLL setting (300MHz default) */
+#endif
+
+.globl platformsetup
+platformsetup:
+ mov r3, r0 /* save skip information */
+#ifdef CONFIG_APTIX
+ ldr r0, REG_SDRC_MCFG_0
+ ldr r1, VAL_SDRC_MCFG_0
+ str r1, [r0]
+ ldr r0, REG_SDRC_MR_0
+ ldr r1, VAL_SDRC_MR_0
+ str r1, [r0]
+ /* a ddr needs emr1 set here */
+ ldr r0, REG_SDRC_SHARING
+ ldr r1, VAL_SDRC_SHARING
+ str r1, [r0]
+ ldr r0, REG_SDRC_RFR_CTRL_0
+ ldr r1, VAL_SDRC_RFR_CTRL_0
+ str r1, [r0]
+
+ /* little delay after init */
+ mov r2, #0x1800
+1:
+ subs r2, r2, #0x1
+ bne 1b
+#endif
+#ifdef CONFIG_PARTIAL_SRAM
+ ldr sp, SRAM_STACK
+ str ip, [sp] /* stash old link register */
+ mov ip, lr /* save link reg across call */
+ mov r0, r3 /* pass skip info to s_init */
+ bl s_init /* go setup pll,mux,memory */
+ ldr ip, [sp] /* restore save ip */
+ mov lr, ip /* restore link reg */
+#endif
+
+ /* map interrupt controller */
+ ldr r0, VAL_INTH_SETUP
+ mcr p15, 0, r0, c15, c2, 4
+
+ /* back to arch calling code */
+ mov pc, lr
+
+ /* the literal pools origin */
+ .ltorg
+
+REG_CONTROL_STATUS:
+ .word CONTROL_STATUS
+VAL_INTH_SETUP:
+ .word PERIFERAL_PORT_BASE
+SRAM_STACK:
+ .word LOW_LEVEL_SRAM_STACK
+
+
+
+
+
+
diff --git a/x-loader/board/omap2420h4/x-load.lds b/x-loader/board/omap2420h4/x-load.lds
new file mode 100644
index 0000000..f664ca7
--- /dev/null
+++ b/x-loader/board/omap2420h4/x-load.lds
@@ -0,0 +1,54 @@
+/*
+ * January 2004 - Changed to support H4 device
+ * Copyright (c) 2004 Texas Instruments
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+ . = 0x00000000;
+
+ . = ALIGN(4);
+ .text :
+ {
+ cpu/arm1136/start.o (.text)
+ *(.text)
+ }
+
+ . = ALIGN(4);
+ .rodata : { *(.rodata) }
+
+ . = ALIGN(4);
+ .data : { *(.data) }
+
+ . = ALIGN(4);
+ .got : { *(.got) }
+
+ . = ALIGN(4);
+ __bss_start = .;
+ .bss : { *(.bss) }
+ _end = .;
+}
generated by cgit v1.1 at 2024-04-27 22:40:25 +0000