diff options
Diffstat (limited to 'x-loader/board')
42 files changed, 9815 insertions, 0 deletions
diff --git a/x-loader b/x-loader deleted file mode 160000 -Subproject 1c9276af4d6a5b7014a7630a1abeddf3b317756 diff --git a/x-loader/board/omap1710h3/Makefile b/x-loader/board/omap1710h3/Makefile new file mode 100644 index 0000000..94f5821 --- /dev/null +++ b/x-loader/board/omap1710h3/Makefile @@ -0,0 +1,47 @@ +# +# (C) Copyright 2000, 2001, 2002 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = lib$(BOARD).a + +OBJS := omap1710h3.o +SOBJS := platform.o + +$(LIB): $(OBJS) $(SOBJS) + $(AR) crv $@ $^ + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) + $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ + +-include .depend + +######################################################################### diff --git a/x-loader/board/omap1710h3/config.mk b/x-loader/board/omap1710h3/config.mk new file mode 100644 index 0000000..d9e3c76 --- /dev/null +++ b/x-loader/board/omap1710h3/config.mk @@ -0,0 +1,26 @@ +# +# (C) Copyright 2002 +# Gary Jennejohn, DENX Software Engineering, <gj@denx.de> +# David Mueller, ELSOFT AG, <d.mueller@elsoft.ch> +# +# (C) Copyright 2004 +# Texas Instruments, <www.ti.com> +# Kshitij Gupta <Kshitij@ti.com> +# +# TI H3 board with OMAP1710 (ARM925EJS) cpu +# see http://www.ti.com/ for more information on Texas Instruments +# +# Innovator has 1 bank of 256 MB SDRAM +# Physical Address: +# 1000'0000 to 2000'0000 +# +# +# Linux-Kernel is expected to be at 1000'8000, entry 1000'8000 +# (mem base + reserved) +# +# we load ourself to 1108'0000 +# +# + +PLATFORM_LDFLAGS += -no-warn-mismatch +TEXT_BASE = 0x11080000 diff --git a/x-loader/board/omap1710h3/omap1710h3.c b/x-loader/board/omap1710h3/omap1710h3.c new file mode 100644 index 0000000..245cfe2 --- /dev/null +++ b/x-loader/board/omap1710h3/omap1710h3.c @@ -0,0 +1,89 @@ +/* + * (C) Copyright 2004 + * Texas Instruments, <www.ti.com> + * Jian Zhang <jzhang@ti.com> + * + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH <www.elinos.com> + * Marius Groeger <mgroeger@sysgo.de> + * + * (C) Copyright 2002 + * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#if defined(CONFIG_OMAP1710) +#include <./configs/omap1510.h> +#endif + +#define COMP_MODE_ENABLE ((unsigned int)0x0000EAEF) + +int board_init (void) +{ +#ifdef CFG_PRINTF + + /* setup for UART1 */ + *(volatile unsigned int *) ((unsigned int)FUNC_MUX_CTRL_0) &= ~(0x02000000); /* bit 25 */ + /* bit 29 for UART1 */ + *(volatile unsigned int *) ((unsigned int)MOD_CONF_CTRL_0) &= ~(0x00002000); + + /* Enable the power for UART1 */ +#define UART1_48MHZ_ENABLE ((unsigned short)0x0200) +#define SW_CLOCK_REQUEST 0xFFFE0834 + *((volatile unsigned short *)SW_CLOCK_REQUEST) |= UART1_48MHZ_ENABLE; + +#endif + + *(volatile unsigned int *) ((unsigned int)COMP_MODE_CTRL_0) = COMP_MODE_ENABLE; + return 0; +} + +#define GPIO1_DIRECTION 0xFFFBE434 +#define FUNC_MUX_CTRL_F 0xFFFE1094 +#define PU_PD_SEL_4 0xFFFE10C4 +/* + * On H3 board, Nand R/B is tied to GPIO_10 + * We setup this GPIO pin + */ +int nand_init (void) +{ + + /* GPIO_10 for input. it is in GPIO1 module */ + *(volatile unsigned int *) ((unsigned int)GPIO1_DIRECTION) |= 0x0400; + + /* GPIO10 Func_MUX_CTRL reg bit 29:27, Configure V2 to mode1 as GPIO */ + *(volatile unsigned int *) ((unsigned int)FUNC_MUX_CTRL_F) &= 0xC7FFFFFF; + *(volatile unsigned int *) ((unsigned int)FUNC_MUX_CTRL_F) |= 0x08000000; + + /* GPIO10 pullup/down register, Enable pullup on GPIO10 */ + *(volatile unsigned int *) ((unsigned int)PU_PD_SEL_4) |= 0x08; + + if (nand_chip()){ + printf("Unsupported Chip!\n"); + return 1; + } + return 0; +} + +/* optionally do something like blinking LED */ +void board_hang (void) +{} + diff --git a/x-loader/board/omap1710h3/platform.S b/x-loader/board/omap1710h3/platform.S new file mode 100644 index 0000000..ef64e3e --- /dev/null +++ b/x-loader/board/omap1710h3/platform.S @@ -0,0 +1,410 @@ +/* + * Board specific setup info + * + * (C) Copyright 2004 + * Texas Instruments, <www.ti.com> + * Jian Zhang <jzhang@ti.com> + * Kshitij Gupta <Kshitij@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#if defined(CONFIG_OMAP1710) +#include <./configs/omap1510.h> +#endif + + +_TEXT_BASE: + .word TEXT_BASE /* sdram load addr from config.mk */ + +.globl platformsetup +platformsetup: + + + /*------------------------------------------------------* + * Set up ARM CLM registers (IDLECT1) * + *------------------------------------------------------*/ + ldr r0, REG_ARM_IDLECT1 + ldr r1, VAL_ARM_IDLECT1 + str r1, [r0] + + /*------------------------------------------------------* + * Set up ARM CLM registers (IDLECT2) * + *------------------------------------------------------*/ + ldr r0, REG_ARM_IDLECT2 + ldr r1, VAL_ARM_IDLECT2 + str r1, [r0] + + /*------------------------------------------------------* + * Set up ARM CLM registers (IDLECT3) * + *------------------------------------------------------*/ + ldr r0, REG_ARM_IDLECT3 + ldr r1, VAL_ARM_IDLECT3 + str r1, [r0] + + + mov r1, #0x05 /* PER_EN bit */ + ldr r0, REG_ARM_RSTCT2 + strh r1, [r0] /* CLKM; Peripheral reset. */ + + /* Set CLKM to Sync-Scalable */ + /* I supposedly need to enable the dsp clock before switching */ + ldr r1, VAL_ARM_SYSST + ldr r0, REG_ARM_SYSST + strh r1, [r0] + mov r0, #0x400 +1: + subs r0, r0, #0x1 /* wait for any bubbles to finish */ + bne 1b + ldr r1, VAL_ARM_CKCTL + ldr r0, REG_ARM_CKCTL + strh r1, [r0] + + /* a few nops to let settle */ + nop + nop + nop + nop + nop + nop + nop + nop + nop + nop + + /* setup DPLL 1 */ + /* Ramp up the clock to 96Mhz */ + ldr r1, VAL_DPLL1_CTL + ldr r0, REG_DPLL1_CTL + strh r1, [r0] + ands r1, r1, #0x10 /* Check if PLL is enabled. */ + beq lock_end /* Do not look for lock if BYPASS selected */ +2: + ldrh r1, [r0] + ands r1, r1, #0x01 /* Check the LOCK bit.*/ + beq 2b /* loop until bit goes hi. */ +lock_end: + + + /*------------------------------------------------------* + * Turn off the watchdog during init... * + *------------------------------------------------------*/ + ldr r0, REG_WATCHDOG + ldr r1, WATCHDOG_VAL1 + str r1, [r0] + ldr r1, WATCHDOG_VAL2 + str r1, [r0] + ldr r0, REG_WSPRDOG + ldr r1, WSPRDOG_VAL1 + str r1, [r0] + ldr r0, REG_WWPSDOG + +watch1Wait: + ldr r1, [r0] + tst r1, #0x10 + bne watch1Wait + + ldr r0, REG_WSPRDOG + ldr r1, WSPRDOG_VAL2 + str r1, [r0] + ldr r0, REG_WWPSDOG +watch2Wait: + ldr r1, [r0] + tst r1, #0x10 + bne watch2Wait + + + /* Set memory timings corresponding to the new clock speed */ + + /* + * Delay for SDRAM initialization. + */ + mov r3, #0x1800 /* value should be checked */ +3: + subs r3, r3, #0x1 /* Decrement count */ + bne 3b + + + /* + * Set SDRAM control values. Disable refresh before MRS command. + */ + + /* mobile ddr operation */ + ldr r0, REG_SDRAM_OPERATION + mov r2, #07 + str r2, [r0] + + /* config register */ + ldr r0, REG_SDRAM_CONFIG + ldr r1, SDRAM_CONFIG_VAL + str r1, [r0] + + /* manual command register */ + ldr r0, REG_SDRAM_MANUAL_CMD + /* issue set cke high */ + mov r1, #CMD_SDRAM_CKE_SET_HIGH + str r1, [r0] + /* issue nop */ + mov r1, #CMD_SDRAM_NOP + str r1, [r0] + + mov r2, #0x0100 +waitMDDR1: + subs r2, r2, #1 + bne waitMDDR1 /* delay loop */ + + /* issue precharge */ + mov r1, #CMD_SDRAM_PRECHARGE + str r1, [r0] + + + /* issue autorefresh x 2 */ + mov r1, #CMD_SDRAM_AUTOREFRESH + str r1, [r0] + str r1, [r0] + + /* mrs register ddr mobile */ + ldr r0, REG_SDRAM_MRS + mov r1, #0x33 + str r1, [r0] + + /* emrs1 low-power register */ + ldr r0, REG_SDRAM_EMRS1 + /* self refresh on all banks */ + mov r1, #0 + str r1, [r0] + + ldr r0, REG_DLL_URD_CONTROL + ldr r1, DLL_URD_CONTROL_VAL + str r1, [r0] + + ldr r0, REG_DLL_LRD_CONTROL + ldr r1, DLL_LRD_CONTROL_VAL + str r1, [r0] + + ldr r0, REG_DLL_WRT_CONTROL + ldr r1, DLL_WRT_CONTROL_VAL + str r1, [r0] + + /* delay loop */ + mov r2, #0x0100 +waitMDDR2: + subs r2, r2, #1 + bne waitMDDR2 + + /* + * Delay for SDRAM initialization. + */ + mov r3, #0x1800 +4: + subs r3, r3, #1 /* Decrement count. */ + bne 4b + b common_tc + +skip_sdram: + + ldr r0, REG_SDRAM_CONFIG + ldr r1, SDRAM_CONFIG_VAL + str r1, [r0] + + /* Enable EMIFF TC Doubler in OMAP1710 */ + ldr r0, REG_EMIFF_DOUBLER + mov r0, #0x1; + +common_tc: + /* slow interface */ + ldr r1, VAL_TC_EMIFS_CONFIG + ldr r0, REG_TC_EMIFS_CONFIG + str r1, [r0] + +#ifdef CFG_BOOT_CS0 + /* Chip Select 3 for NAND*/ + ldr r1, VAL_TC_EMIFS_CS3_CONFIG + ldr r0, REG_TC_EMIFS_CS3_CONFIG + str r1, [r0] +#else + /* Chip Select 2 for NAND*/ + ldr r1, VAL_TC_EMIFS_CS2_CONFIG + ldr r0, REG_TC_EMIFS_CS2_CONFIG + str r1, [r0] +#endif + + /* Start MPU Timer 1 */ + ldr r0, REG_MPU_LOAD_TIMER + ldr r1, VAL_MPU_LOAD_TIMER + str r1, [r0] + + ldr r0, REG_MPU_CNTL_TIMER + ldr r1, VAL_MPU_CNTL_TIMER + str r1, [r0] + + /* back to arch calling code */ + mov pc, lr + + /* the literal pools origin */ + .ltorg + + +REG_TC_EMIFS_CONFIG: /* 32 bits */ + .word 0xfffecc0c +#ifdef CFG_BOOT_CS0 +REG_TC_EMIFS_CS3_CONFIG: /* 32 bits */ + .word 0xfffecc1c +#else +REG_TC_EMIFS_CS2_CONFIG: /* 32 bits */ + .word 0xfffecc18 +#endif + +/* MPU clock/reset/power mode control registers */ +REG_ARM_CKCTL: /* 16 bits */ + .word 0xfffece00 + +REG_ARM_IDLECT3: /* 16 bits */ + .word 0xfffece24 +REG_ARM_IDLECT2: /* 16 bits */ + .word 0xfffece08 +REG_ARM_IDLECT1: /* 16 bits */ + .word 0xfffece04 + +REG_ARM_RSTCT2: /* 16 bits */ + .word 0xfffece14 +REG_ARM_SYSST: /* 16 bits */ + .word 0xfffece18 +/* DPLL control registers */ +REG_DPLL1_CTL: /* 16 bits */ + .word 0xfffecf00 + +/* Watch Dog register */ +/* secure watchdog stop */ +REG_WSPRDOG: + .word 0xfffeb048 +/* watchdog write pending */ +REG_WWPSDOG: + .word 0xfffeb034 + +WSPRDOG_VAL1: + .word 0x0000aaaa +WSPRDOG_VAL2: + .word 0x00005555 + +/* SDRAM config is: auto refresh enabled, 16 bit 4 bank, + counter @8192 rows, 10 ns, 8 burst */ +REG_SDRAM_CONFIG: + .word 0xfffecc20 + +/* Operation register */ +REG_SDRAM_OPERATION: + .word 0xfffecc80 + +REG_EMIFF_DOUBLER: + .word 0xfffecc60 + +/* Manual command register */ +REG_SDRAM_MANUAL_CMD: + .word 0xfffecc84 + +/* SDRAM MRS (New) config is: CAS latency is 2, burst length 8 */ +REG_SDRAM_MRS: + .word 0xfffecc70 + +/* SDRAM MRS (New) config is: CAS latency is 2, burst length 8 */ +REG_SDRAM_EMRS1: + .word 0xfffecc78 + +/* WRT DLL register */ +REG_DLL_WRT_CONTROL: + .word 0xfffecc64 +DLL_WRT_CONTROL_VAL: + .word 0x03500002 + +/* URD DLL register */ +REG_DLL_URD_CONTROL: + .word 0xfffeccc0 +DLL_URD_CONTROL_VAL: + .word 0x00000006 + +/* LRD DLL register */ +REG_DLL_LRD_CONTROL: + .word 0xfffecccc + +REG_WATCHDOG: + .word 0xfffec808 + +REG_MPU_LOAD_TIMER: + .word 0xfffec600 +REG_MPU_CNTL_TIMER: + .word 0xfffec500 + +/* 96 MHz Samsung Mobile DDR */ +SDRAM_CONFIG_VAL: + .word 0x0c028af4 + +DLL_LRD_CONTROL_VAL: + .word 0x00000006 + +VAL_ARM_CKCTL: + .word 0x350e +VAL_ARM_SYSST: + .word 0x1001 + +VAL_DPLL1_CTL: + .word 0x2810 + +#ifdef CFG_BOOT_CS0 +VAL_TC_EMIFS_CONFIG: + .word 0x00000010 +VAL_TC_EMIFS_CS3_CONFIG: + .word 0xff80fff3 +#else +VAL_TC_EMIFS_CONFIG: + .word 0x00000012 /*swap CS0/CS3 addressing */ +VAL_TC_EMIFS_CS2_CONFIG: + .word 0xff80fff3 +#endif + + +VAL_TC_EMIFF_SDRAM_CONFIG: + .word 0x010290fc +VAL_TC_EMIFF_MRS: + .word 0x00000027 + +VAL_ARM_IDLECT1: + .word 0x000014c6 + +VAL_ARM_IDLECT2: + .word 0x000009ff +VAL_ARM_IDLECT3: + .word 0x0000003f + +WATCHDOG_VAL1: + .word 0x000000f5 +WATCHDOG_VAL2: + .word 0x000000a0 + +VAL_MPU_LOAD_TIMER: + .word 0xffffffff +VAL_MPU_CNTL_TIMER: + .word 0xffffffa1 + +/* command values */ +.equ CMD_SDRAM_NOP, 0x00000000 +.equ CMD_SDRAM_PRECHARGE, 0x00000001 +.equ CMD_SDRAM_AUTOREFRESH, 0x00000002 +.equ CMD_SDRAM_CKE_SET_HIGH, 0x00000007 diff --git a/x-loader/board/omap1710h3/x-load.lds b/x-loader/board/omap1710h3/x-load.lds new file mode 100644 index 0000000..7b84eea --- /dev/null +++ b/x-loader/board/omap1710h3/x-load.lds @@ -0,0 +1,49 @@ +/* + * (C) Copyright 2004 Texas Instruments + * + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, <gj@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + . = 0x00000000; + . = ALIGN(4); + .text : + { + cpu/arm926ejs/start.o (.text) + *(.text) + } + . = ALIGN(4); + .rodata : { *(.rodata) } + . = ALIGN(4); + .data : { *(.data) } + . = ALIGN(4); + .got : { *(.got) } + + . = ALIGN(4); + __bss_start = .; + .bss : { *(.bss) } + _end = .; +} diff --git a/x-loader/board/omap2420h4/Makefile b/x-loader/board/omap2420h4/Makefile new file mode 100644 index 0000000..c72e36b --- /dev/null +++ b/x-loader/board/omap2420h4/Makefile @@ -0,0 +1,47 @@ +# +# (C) Copyright 2000, 2001, 2002 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = lib$(BOARD).a + +OBJS := omap2420h4.o +SOBJS := platform.o + +$(LIB): $(OBJS) $(SOBJS) + $(AR) crv $@ $^ + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) + $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ + +-include .depend + +######################################################################### diff --git a/x-loader/board/omap2420h4/config.mk b/x-loader/board/omap2420h4/config.mk new file mode 100644 index 0000000..1c770f3 --- /dev/null +++ b/x-loader/board/omap2420h4/config.mk @@ -0,0 +1,26 @@ +# +# (C) Copyright 2004 +# Texas Instruments, <www.ti.com> +# +# TI H4 board with OMAP2420 (ARM1136) cpu +# see http://www.ti.com/ for more information on Texas Instruments +# +# H4 has 1 bank of 32MB or 64MB mDDR-SDRAM on CS0 +# H4 has 1 bank of 32MB or 00MB mDDR-SDRAM on CS1 +# Physical Address: +# 8000'0000 (bank0) +# A000/0000 (bank1) ES2 will be configurable +# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000 +# (mem base + reserved) + +# For use with external or internal boots. +# CONFIG_PARTIAL_SRAM must be defined to use this. +TEXT_BASE = 0x80e80000 + +# Used with full SRAM boot. +# This is either with a GP system or a signed boot image. +# easiest, and safest way to go if you can. +# Comment out //CONFIG_PARTIAL_SRAM for this one. +# +#TEXT_BASE = 0x40280000 + diff --git a/x-loader/board/omap2420h4/omap2420h4.c b/x-loader/board/omap2420h4/omap2420h4.c new file mode 100644 index 0000000..ef81b49 --- /dev/null +++ b/x-loader/board/omap2420h4/omap2420h4.c @@ -0,0 +1,598 @@ +/* + * Copyright (C) 2005 Texas Instruments. + * Jian Zhang <jzhang@ti.com> + * Richard Woodruff <r-woodruff2@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <common.h> +#include <asm/arch/omap2420.h> +#include <asm/arch/bits.h> + +#include <asm/arch/mem.h> +#include <asm/arch/sys_info.h> +#include <asm/arch/clocks.h> + +static void wait_for_command_complete(unsigned int wd_base); +static void watchdog_init(void); +static void peripheral_enable(void); +static void muxSetupUART1(void); +static u32 get_cpu_rev(void); + + +/******************************************************* + * Routine: delay + * Description: spinning delay to use before udelay works + ******************************************************/ +static inline void delay (unsigned long loops) +{ + __asm__ volatile ("1:\n" + "subs %0, %1, #1\n" + "bne 1b":"=r" (loops):"0" (loops)); +} + +/***************************************** + * Routine: board_init + * Description: Early hardware init. + *****************************************/ +int board_init (void) +{ + return 0; +} + +#ifdef CFG_SDRAM_DDR +void +config_sdram_ddr(u32 rev) +{ + /* ball D11, mode 0 */ + __raw_writeb(0x08, 0x48000032); + + /* SDRC_CS0 Configuration */ + if (rev == CPU_2420_2422_ES1) { + __raw_writel(H4_2422_SDRC_MDCFG_0_DDR, SDRC_MCFG_0); + __raw_writel(H4_2422_SDRC_SHARING, SDRC_SHARING); + } else { + __raw_writel(H4_2420_SDRC_MDCFG_0_DDR, SDRC_MCFG_0); + __raw_writel(H4_2420_SDRC_SHARING, SDRC_SHARING); + } + + __raw_writel(H4_242x_SDRC_RFR_CTRL_ES1, SDRC_RFR_CTRL); + __raw_writel(H4_242x_SDRC_ACTIM_CTRLA_0_ES1, SDRC_ACTIM_CTRLA_0); + __raw_writel(H4_242x_SDRC_ACTIM_CTRLB_0_ES1, SDRC_ACTIM_CTRLB_0); + + /* Manual Command sequence */ + __raw_writel(CMD_NOP, SDRC_MANUAL_0); + __raw_writel(CMD_PRECHARGE, SDRC_MANUAL_0); + __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_0); + __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_0); + + + /* + * CS0 SDRC Mode Register + * Burst length = 4 - DDR memory + * Serial mode + * CAS latency = 3 + */ + __raw_writel(0x00000032, SDRC_MR_0); + + /* SDRC DLLA control register */ + /* Delay is 90 degrees */ + if (rev == CPU_2420_2422_ES1) { + /* Enable DLL, Load counter with 115 (middle of range) */ + __raw_writel(0x00000002, SDRC_DLLA_CTRL); + /* Enable DLL, Load counter with 128 (middle of range) */ + __raw_writel(0x00000002, SDRC_DLLB_CTRL); + } else { + /* Enable DLL, Load counter with 115 (middle of range) */ + __raw_writel(0x00000008, SDRC_DLLA_CTRL); // ES2.x + /* Enable DLL, Load counter with 128 (middle of range) */ + __raw_writel(0x00000008, SDRC_DLLB_CTRL); // ES2.x + } + +} +#endif // CFG_SDRAM_DDR + + +#ifdef CFG_SDRAM_COMBO +void +config_sdram_combo(u32 rev) +{ + + u32 dllctrl=0; + + /* ball C12, mode 0 */ + __raw_writeb(0x00, 0x480000a1); + /* ball D11, mode 0 */ + __raw_writeb(0x00, 0x48000032); + /* ball B13, mode 0 - for CKE1 (not needed rkw for combo) */ + __raw_writeb(0x00, 0x480000a3); + + /*configure sdrc 32 bit for COMBO ddr sdram. Issue soft reset */ + __raw_writel(0x00000012, SDRC_SYSCONFIG); + delay(200000); + __raw_writel(0x00000010, SDRC_SYSCONFIG); + + /* SDRCTriState: no Tris */ + /* CS0MuxCfg: 000 (32-bit SDRAM on D31..0) */ + __raw_writel(H4_2420_SDRC_SHARING, SDRC_SHARING); + + + /* CS0 SDRC Memory Configuration, */ + /* DDR-SDRAM, External SDRAM is x32bit, */ + /* Configure to MUX9: 1x8Mbx32 */ + __raw_writel(H4_2420_COMBO_MDCFG_0_DDR, SDRC_MCFG_0); + __raw_writel(H4_2420_SDRC_ACTIM_CTRLA_0, SDRC_ACTIM_CTRLA_0); + __raw_writel(H4_2420_SDRC_ACTIM_CTRLB_0, SDRC_ACTIM_CTRLB_0); + __raw_writel(H4_242x_SDRC_RFR_CTRL_ES1, SDRC_RFR_CTRL); + + /* Manual Command sequence */ + __raw_writel(CMD_NOP, SDRC_MANUAL_0); + __raw_writel(CMD_PRECHARGE, SDRC_MANUAL_0); + __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_0); + __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_0); + + /* CS0 SDRC Mode Register */ + /* Burst length = 4 - DDR memory */ + /* Serial mode */ + /* CAS latency = 3 */ + __raw_writel(H4_2422_SDRC_MR_0_DDR, SDRC_MR_0); + + /* CS1 SDRC Memory Configuration, */ + /* DDR-SDRAM, External SDRAM is x32bit, */ + /* Configure to MUX9: 1x8Mbx32 */ + __raw_writel(H4_2420_COMBO_MDCFG_0_DDR, SDRC_MCFG_1); + __raw_writel(H4_242X_SDRC_ACTIM_CTRLA_0_100MHz, SDRC_ACTIM_CTRLA_1); + __raw_writel(H4_2420_SDRC_ACTIM_CTRLB_0, SDRC_ACTIM_CTRLB_1); + __raw_writel(H4_242x_SDRC_RFR_CTRL_ES1, 0x680090d4); + + /* Manual Command sequence */ + __raw_writel(CMD_NOP, SDRC_MANUAL_1); + __raw_writel(CMD_PRECHARGE, SDRC_MANUAL_1); + __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_1); + __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_1); + + /* CS1 SDRC Mode Register */ + /* Burst length = 4 - DDR memory */ + /* Serial mode */ + /* CAS latency = 3 */ + __raw_writel(H4_2422_SDRC_MR_0_DDR, SDRC_MR_1); + + /* SDRC DLLA control register */ + /* Delay is 90 degrees */ + if (rev == CPU_242X_ES1) + dllctrl = (BIT0|BIT3); + else + dllctrl = BIT0; + + if (rev == CPU_2420_2422_ES1) { + /* Enable DLL, Load counter with 115 (middle of range) */ + __raw_writel(0x00007306, SDRC_DLLA_CTRL); + __raw_writel(0x00007302, SDRC_DLLA_CTRL); + /* Enable DLL, Load counter with 128 (middle of range) */ + __raw_writel(0x00007306, SDRC_DLLB_CTRL); /* load ctr value */ + __raw_writel(0x00007302, SDRC_DLLB_CTRL); /* lock and go */ + } + else { + /* Enable DLL, Load counter with 115 (middle of range) */ + __raw_writel(H4_2420_SDRC_DLLAB_CTRL, SDRC_DLLA_CTRL); // ES2.x + __raw_writel(H4_2420_SDRC_DLLAB_CTRL & ~(LOADDLL|dllctrl), SDRC_DLLA_CTRL); // ES2.x + __raw_writel(H4_2420_SDRC_DLLAB_CTRL, SDRC_DLLB_CTRL); // ES2.x ? + __raw_writel(H4_2420_SDRC_DLLAB_CTRL & ~(LOADDLL|dllctrl), SDRC_DLLB_CTRL); // ES2.x + } +} + +#endif // CFG_SDRAM_COMBO + +#ifdef CFG_SDRAM_SDR +void +config_sdram_sdr(u32 rev) +{ + u32 dllctrl=0; + + /* ball D11, mode 0 */ + __raw_writeb(0x00, 0x48000032); + + __raw_writel(0x00000012, SDRC_SYSCONFIG); + delay(200000); + __raw_writel(0x00000010, SDRC_SYSCONFIG); + + /* Chip-level shared interface management */ + /* SDRCTriState: no Tris */ + /* CS0MuxCfg: 000 (32-bit SDRAM on D31..0) */ + /* CS1MuxCfg: 000 (32-bit SDRAM on D31..0) */ + if (rev == CPU_2420_2422_ES1) + __raw_writel(H4_2422_SDRC_SHARING, SDRC_SHARING); + else + __raw_writel(H4_2420_SDRC_SHARING, SDRC_SHARING); + + /* CS0 SDRC Memory Configuration, */ + /* DDR-SDRAM, External SDRAM is x32bit, */ + /* Configure to MUX14: 32Mbx32 */ + __raw_writel(H4_2420_SDRC_MDCFG_0_SDR, SDRC_MCFG_0); /* diff from combo case */ + __raw_writel(H4_2420_SDRC_ACTIM_CTRLA_0, SDRC_ACTIM_CTRLA_0); + __raw_writel(H4_2420_SDRC_ACTIM_CTRLB_0, SDRC_ACTIM_CTRLB_0); + __raw_writel(H4_242x_SDRC_RFR_CTRL_ES1, SDRC_RFR_CTRL); + + /* Manual Command sequence */ + __raw_writel(CMD_NOP, SDRC_MANUAL_0); + __raw_writel(CMD_PRECHARGE, SDRC_MANUAL_0); + __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_0); + __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_0); + + /* CS0 SDRC Mode Register */ + /* Burst length = 2 - SDR memory */ + /* Serial mode */ + /* CAS latency = 3 */ + __raw_writel(H4_2420_SDRC_MR_0_SDR, SDRC_MR_0); /* diff from combo case */ + + /* SDRC DLLA control register */ + /* Enable DLL, Load counter with 115 (middle of range) */ + /* Delay is 90 degrees */ + + if (rev == CPU_242X_ES1) + dllctrl = (BIT0|BIT3); + else + dllctrl = BIT0; + + if (rev == CPU_2420_2422_ES1) { + __raw_writel(0x00007306, SDRC_DLLA_CTRL); + __raw_writel(0x00007302, SDRC_DLLA_CTRL); + /* Enable DLL, Load counter with 128 (middle of range) */ + __raw_writel(0x00007306, SDRC_DLLB_CTRL); /* load ctr value */ + __raw_writel(0x00007302, SDRC_DLLB_CTRL); /* lock and go */ + } + else { + __raw_writel(H4_2420_SDRC_DLLAB_CTRL, SDRC_DLLA_CTRL); // ES2.x + __raw_writel(H4_2420_SDRC_DLLAB_CTRL & ~(LOADDLL|dllctrl), SDRC_DLLA_CTRL); // ES2.x + /* Enable DLL, Load counter with 128 (middle of range) */ + __raw_writel(H4_2420_SDRC_DLLAB_CTRL, SDRC_DLLB_CTRL); // ES2.x + __raw_writel(H4_2420_SDRC_DLLAB_CTRL & ~(LOADDLL|dllctrl), SDRC_DLLB_CTRL); // ES2.x + } + +} +#endif // CFG_SDRAM_SDR + +#ifdef CFG_SDRAM_STACKED +void +config_sdram_stacked(u32 rev) +{ + + /* Pin Muxing for SDRC */ + __raw_writeb(0x00, 0x480000a1); /* mux mode 0 (CS1) */ + __raw_writeb(0x00, 0x480000a3); /* mux mode 0 (CKE1) */ + __raw_writeb(0x00, 0x48000032); /* connect sdrc_a12 */ + __raw_writeb(0x00, 0x48000031); /* connect sdrc_a13 */ + + /* configure sdrc 32 bit for COMBO ddr sdram */ + __raw_writel(0x00000010, SDRC_SYSCONFIG); /* no idle ack and RESET enable */ + delay(200000); + __raw_writel(0x00000010, SDRC_SYSCONFIG); /* smart idle mode */ + + /* SDRC_SHARING */ + /* U-boot is writing 0x00000100 though (H4_2420_SDRC_SHARING ) */ + //__raw_writel(H4_2420_SDRC_SHARING, SDRC_SHARING); + + __raw_writel(0x00004900, SDRC_SHARING); + + /* SDRC_CS0 Configuration */ + /* None for ES2.1 */ + + /* SDRC_CS1 Configuration */ + __raw_writel(0x00000000, SDRC_CS_CFG); /* Remap CS1 to 0x80000000 */ + + /* Disable power down of CKE */ + __raw_writel(0x00000085, SDRC_POWER); + + __raw_writel(0x01A02019, SDRC_MCFG_1); /* SDRC_MCFG1 */ + __raw_writel(0x0003DD03, SDRC_RFR_CTRL1); /* SDRC_RFR_CTRL1 */ + __raw_writel(0x92DDC485, SDRC_ACTIM_CTRLA_1); /* SDRC_ACTIM_CTRLA0 */ + __raw_writel(0x00000014, SDRC_ACTIM_CTRLB_1); /* SDRC_ACTIM_CTRLB0 */ + + /*Manual Command sequence */ + __raw_writel(CMD_NOP, SDRC_MANUAL_1); + __raw_writel(CMD_PRECHARGE, SDRC_MANUAL_1); + __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_1); + __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_1); + + /* CS0 SDRC Mode Register */ + /* Burst length = 4 - DDR memory */ + /* Serial mode */ + /* CAS latency = 3 */ + __raw_writel(0x00000032, SDRC_MR_1); + __raw_writel(0x00000020, SDRC_EMR2_1); /* weak-strength driver */ + + /* SDRC DLLA control register */ + /* Delay is 90 degrees */ + if (rev == CPU_2420_2422_ES1) { + /* Enable DLL, Load counter with 115 (middle of range) */ + __raw_writel(0x00007302, SDRC_DLLA_CTRL); + /* Enable DLL, Load counter with 128 (middle of range) */ + __raw_writel(0x00007302, SDRC_DLLB_CTRL); + } + else { + /* Enable DLL, Load counter with 115 (middle of range) */ + __raw_writel(0x00003108, SDRC_DLLA_CTRL); // ES2.x + /* Enable DLL, Load counter with 128 (middle of range) */ + __raw_writel(0x00003108, SDRC_DLLB_CTRL); // ES2.x + } +} +#endif // CFG_SDRAM_STACKED + +/********************************************************** + * Routine: s_init + * Description: Does early system init of muxing and clocks. + * - Called at time when only stack is available. + **********************************************************/ +int s_init(int skip) +{ + u32 rev; + + rev = get_cpu_rev(); + + watchdog_init(); + muxSetupUART1(); + delay(100); + + /*DPLL out = 2x DPLL --> core clock */ + __raw_writel(DPLL_OUT, CM_CLKSEL2_PLL); + + /*DPLL into low power bypass (others off) */ + __raw_writel(0x00000001, CM_CLKEN_PLL); + + /*MPU core clock = Core /2 = 300 */ + __raw_writel(MPU_DIV, CM_CLKSEL_MPU); + + /*DSPif=200, DSPif=100, IVA=200 */ + __raw_writel(DSP_DIV, CM_CLKSEL_DSP); + + /*GFX clock (L3/2) 50MHz */ + __raw_writel(GFX_DIV, CM_CLKSEL_GFX); + + /*L3=100, L4=100, DisplaySS=50 Vlync=96Mhz,ssi=100, usb=50 */ + __raw_writel(BUS_DIV, CM_CLKSEL1_CORE); + + /*12MHz apll src, 12/(1+1)*50=300 */ + __raw_writel(DPLL_VAL, CM_CLKSEL1_PLL); + + /*Valid the configuration */ + __raw_writel(0x00000001, PRCM_CLKCFG_CTRL); + delay(1000); + + /*Enable DPLL=300, 96MHz APLL locked. */ + __raw_writel(0x0000000F, CM_CLKEN_PLL); + delay(200000); + +#ifdef CFG_SDRAM_DDR + config_sdram_ddr(rev); +#elif defined(CFG_SDRAM_COMBO) + config_sdram_combo(rev); +#elif defined(CFG_SDRAM_SDR) + config_sdram_sdr(rev); +#elif defined(CFG_SDRAM_STACKED) + config_sdram_stacked(rev); +#else +#error SDRAM type not supported +#endif + + delay(20000); + peripheral_enable(); + return(0); +} + +/******************************************************* + * Routine: misc_init_r + * Description: Init ethernet (done here so udelay works) + ********************************************************/ +int misc_init_r (void) +{ + return(0); +} + +/**************************************** + * Routine: watchdog_init + * Description: Shut down watch dogs + *****************************************/ +static void watchdog_init(void) +{ +#define GP (BIT8|BIT9) + + /* There are 4 watch dogs. 1 secure, and 3 general purpose. + * I would expect that the ROM takes care of the secure one, + * but we will try also. Of the 3 GP ones, 1 can reset us + * directly, the other 2 only generate MPU interrupts. + */ + __raw_writel(WD_UNLOCK1 ,WD2_BASE+WSPR); + wait_for_command_complete(WD2_BASE); + __raw_writel(WD_UNLOCK2 ,WD2_BASE+WSPR); + +#if MPU_WD_CLOCKED /* value 0x10 stick on aptix, BIT4 polarity seems oppsite*/ + __raw_writel(WD_UNLOCK1 ,WD3_BASE+WSPR); + wait_for_command_complete(WD3_BASE); + __raw_writel(WD_UNLOCK2 ,WD3_BASE+WSPR); + + __raw_writel(WD_UNLOCK1 ,WD4_BASE+WSPR); + wait_for_command_complete(WD4_BASE); + __raw_writel(WD_UNLOCK2 ,WD4_BASE+WSPR); +#endif + +} + +/****************************************************** + * Routine: wait_for_command_complete + * Description: Wait for posting to finish on watchdog + ******************************************************/ +static void wait_for_command_complete(unsigned int wd_base) +{ + int pending = 1; + do { + pending = __raw_readl(wd_base+WWPS); + } while (pending); +} + + +/********************************************** + * Routine: dram_init + * Description: sets uboots idea of sdram size + **********************************************/ +int dram_init (void) +{ + return 0; +} + +/***************************************************************** + * Routine: peripheral_enable + * Description: Enable the clks & power for perifs (GPT2, UART1,...) + ******************************************************************/ +static void peripheral_enable(void) +{ + unsigned int v, if_clks=0, func_clks=0; + + /* Enable GP2 timer.*/ + if_clks |= BIT4; + func_clks |= BIT4; + v = __raw_readl(CM_CLKSEL2_CORE) | 0x4; /* Sys_clk input OMAP2420_GPT2 */ + __raw_writel(v, CM_CLKSEL2_CORE); + __raw_writel(0x1, CM_CLKSEL_WKUP); + +#ifdef CFG_NS16550 + /* Enable UART1 clock */ + func_clks |= BIT21; + if_clks |= BIT21; +#endif + v = __raw_readl(CM_ICLKEN1_CORE) | if_clks; /* Interface clocks on */ + __raw_writel(v,CM_ICLKEN1_CORE ); + v = __raw_readl(CM_FCLKEN1_CORE) | func_clks; /* Functional Clocks on */ + __raw_writel(v, CM_FCLKEN1_CORE); + delay(1000); + +#ifndef KERNEL_UPDATED + { +#define V1 0xffffffff +#define V2 0x00000007 + + __raw_writel(V1, CM_FCLKEN1_CORE); + __raw_writel(V2, CM_FCLKEN2_CORE); + __raw_writel(V1, CM_ICLKEN1_CORE); + __raw_writel(V1, CM_ICLKEN2_CORE); + } +#endif + +} + +/* Pin Muxing registers used for UART1 */ +#define CONTROL_PADCONF_UART1_CTS ((volatile unsigned char *)0x480000C5) +#define CONTROL_PADCONF_UART1_RTS ((volatile unsigned char *)0x480000C6) +#define CONTROL_PADCONF_UART1_TX ((volatile unsigned char *)0x480000C7) +#define CONTROL_PADCONF_UART1_RX ((volatile unsigned char *)0x480000C8) +/**************************************** + * Routine: muxSetupUART1 (ostboot) + * Description: Set up uart1 muxing + *****************************************/ +static void muxSetupUART1(void) +{ + volatile unsigned char *MuxConfigReg; + + /* UART1_CTS pin configuration, PIN = D21 */ + MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_UART1_CTS; + *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */ + + /* UART1_RTS pin configuration, PIN = H21 */ + MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_UART1_RTS; + *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */ + + /* UART1_TX pin configuration, PIN = L20 */ + MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_UART1_TX; + *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */ + + /* UART1_RX pin configuration, PIN = T21 */ + MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_UART1_RX; + *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */ +} + +int nand_init(void) +{ + u32 rev; + + rev = get_cpu_rev(); + + + /* GPMC pin muxing */ + (*(volatile int*)0x48000070) &= 0x000000FF; + (*(volatile int*)0x48000074) &= 0x00000000; + (*(volatile int*)0x48000078) &= 0x00000000; + (*(volatile int*)0x4800007C) &= 0x00000000; + (*(volatile int*)0x48000080) &= 0xFF000000; + + /* GPMC_IO_DIR */ + (*(volatile int*)0x4800008C) = 0x19000000; + + /* GPMC Configuration */ + (*(volatile int*)0x6800A010) = 0x0000000A; + while (((*(volatile int *)0x6800A014) & 0x00000001) == 0); + + (*(volatile int*)0x6800A050) = 0x00000001; + (*(volatile int*)0x6800A060) = 0x00001800; + (*(volatile int*)0x6800A064) = 0x00141400; + (*(volatile int*)0x6800A068) = 0x00141400; + (*(volatile int*)0x6800A06C) = 0x0F010F01; + (*(volatile int*)0x6800A070) = 0x010C1414; + (*(volatile int*)0x6800A074) = 0x00000A80; + (*(volatile int*)0x6800A078) = 0x00000C44; //base 0x04000000 + + (*(volatile int*)0x6800A0A8) = 0x00000000; + delay(1000); +#ifdef CFG_SDRAM_STACKED + (*(volatile int*)0x6800A090) = 0x00011000; +#else + (*(volatile int*)0x6800A090) = 0x00011200; +#endif + (*(volatile int*)0x6800A094) = 0x001f1f00; + (*(volatile int*)0x6800A098) = 0x00080802; + (*(volatile int*)0x6800A09C) = 0x1C091C09; + (*(volatile int*)0x6800A0A0) = 0x031A1F1F; + (*(volatile int*)0x6800A0A4) = 0x000003C2; + (*(volatile int*)0x6800A0A8) = 0x00000F48; + + if (rev != CPU_2420_2422_ES1) + (*(volatile int*)0x6800A040) = 0x1FF0; // es2.x + + if (nand_chip()){ + printf("Unsupported Chip!\n"); + return 1; + } + return 0; +} + +/****************************************** + * get_cpu_rev(void) - extract version info + ******************************************/ +u32 get_cpu_rev(void) +{ + u32 v; + v = __raw_readl(TAP_IDCODE_REG); + v = v >> 28; + return(v+1); /* currently 2422 and 2420 match up */ +} + +/* optionally do something like blinking LED */ +void board_hang (void) +{} + + + diff --git a/x-loader/board/omap2420h4/platform.S b/x-loader/board/omap2420h4/platform.S new file mode 100644 index 0000000..5cc37e5 --- /dev/null +++ b/x-loader/board/omap2420h4/platform.S @@ -0,0 +1,218 @@ +/* + * Board specific setup info + * + * (C) Copyright 2004 + * Texas Instruments, <www.ti.com> + * Richard Woodruff <r-woodruff2@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <asm/arch/omap2420.h> +#include <asm/arch/mem.h> +#include <asm/arch/clocks.h> + +_TEXT_BASE: + .word TEXT_BASE /* sdram load addr from config.mk */ + +#ifdef CONFIG_PARTIAL_SRAM + +/************************************************************************** + * cpy_clk_code: relocates clock code into SRAM where its safer to execute + * R1 = SRAM destination address. + *************************************************************************/ +.global cpy_clk_code + cpy_clk_code: + /* Copy DPLL code into SRAM */ + adr r0, go_to_speed /* get addr of clock setting code */ + mov r2, #384 /* r2 size to copy (div by 32 bytes) */ + mov r1, r1 /* r1 <- dest address (passed in) */ + add r2, r2, r0 /* r2 <- source end address */ +next2: + ldmia r0!, {r3-r10} /* copy from source address [r0] */ + stmia r1!, {r3-r10} /* copy to target address [r1] */ + cmp r0, r2 /* until source end address [r2] */ + bne next2 + mov pc, lr /* back to caller */ + +/* **************************************************************************** + * go_to_speed: -Moves to bypass, -Commits clock dividers, -puts dpll at speed + * -executed from SRAM. + * R0 = PRCM_CLKCFG_CTRL - addr of valid reg + * R1 = CM_CLKEN_PLL - addr dpll ctlr reg + * R2 = dpll value + * R3 = CM_IDLEST_CKGEN - addr dpll lock wait + ******************************************************************************/ +.global go_to_speed + go_to_speed: + sub sp, sp, #0x4 /* get some stack space */ + str r4, [sp] /* save r4's value */ + + /* move into fast relock bypass */ + ldr r8, pll_ctl_add + mov r4, #0x2 + str r4, [r8] + ldr r4, pll_stat +block: + ldr r8, [r4] /* wait for bypass to take effect */ + and r8, r8, #0x3 + cmp r8, #0x1 + bne block + + /* set new dpll dividers _after_ in bypass */ + ldr r4, pll_div_add + ldr r8, pll_div_val + str r8, [r4] + + /* now prepare GPMC (flash) for new dpll speed */ + /* flash needs to be stable when we jump back to it */ + ldr r4, cfg3_0_addr + ldr r8, cfg3_0_val + str r8, [r4] + ldr r4, cfg4_0_addr + ldr r8, cfg4_0_val + str r8, [r4] + ldr r4, cfg1_0_addr + ldr r8, [r4] + orr r8, r8, #0x3 /* up gpmc divider */ + str r8, [r4] + + /* setup to 2x loop though code. The first loop pre-loads the + * icache, the 2nd commits the prcm config, and locks the dpll + */ + mov r4, #0x1000 /* spin spin spin */ + mov r8, #0x4 /* first pass condition & set registers */ + cmp r8, #0x4 +2: + ldrne r8, [r3] /* DPLL lock check */ + and r8, r8, #0x7 + cmp r8, #0x2 + beq 4f +3: + subeq r8, r8, #0x1 + streq r8, [r0] /* commit dividers (2nd time) */ + nop +lloop1: + sub r4, r4, #0x1 /* Loop currently necessary else bad jumps */ + nop + cmp r4, #0x0 + bne lloop1 + mov r4, #0x40000 + cmp r8, #0x1 + nop + streq r2, [r1] /* lock dpll (2nd time) */ + nop +lloop2: + sub r4, r4, #0x1 /* loop currently necessary else bad jumps */ + nop + cmp r4, #0x0 + bne lloop2 + mov r4, #0x40000 + cmp r8, #0x1 + nop + ldreq r8, [r3] /* get lock condition for dpll */ + cmp r8, #0x4 /* first time though? */ + bne 2b + moveq r8, #0x2 /* set to dpll check condition. */ + beq 3b /* if condition not true branch */ +4: + ldr r4, [sp] + add sp, sp, #0x4 /* return stack space */ + mov pc, lr /* back to caller, locked */ + +_go_to_speed: .word go_to_speed + +/* these constants need to be close for PIC code */ +cfg3_0_addr: + .word GPMC_CONFIG3_0 +cfg3_0_val: + .word SMNAND_GPMC_CONFIG3 +cfg4_0_addr: + .word GPMC_CONFIG4_0 +cfg4_0_val: + .word SMNAND_GPMC_CONFIG4 +cfg1_0_addr: + .word GPMC_CONFIG1_0 +pll_ctl_add: + .word CM_CLKEN_PLL +pll_stat: + .word CM_IDLEST_CKGEN +pll_div_add: + .word CM_CLKSEL1_PLL +pll_div_val: + .word DPLL_VAL /* DPLL setting (300MHz default) */ +#endif + +.globl platformsetup +platformsetup: + mov r3, r0 /* save skip information */ +#ifdef CONFIG_APTIX + ldr r0, REG_SDRC_MCFG_0 + ldr r1, VAL_SDRC_MCFG_0 + str r1, [r0] + ldr r0, REG_SDRC_MR_0 + ldr r1, VAL_SDRC_MR_0 + str r1, [r0] + /* a ddr needs emr1 set here */ + ldr r0, REG_SDRC_SHARING + ldr r1, VAL_SDRC_SHARING + str r1, [r0] + ldr r0, REG_SDRC_RFR_CTRL_0 + ldr r1, VAL_SDRC_RFR_CTRL_0 + str r1, [r0] + + /* little delay after init */ + mov r2, #0x1800 +1: + subs r2, r2, #0x1 + bne 1b +#endif +#ifdef CONFIG_PARTIAL_SRAM + ldr sp, SRAM_STACK + str ip, [sp] /* stash old link register */ + mov ip, lr /* save link reg across call */ + mov r0, r3 /* pass skip info to s_init */ + bl s_init /* go setup pll,mux,memory */ + ldr ip, [sp] /* restore save ip */ + mov lr, ip /* restore link reg */ +#endif + + /* map interrupt controller */ + ldr r0, VAL_INTH_SETUP + mcr p15, 0, r0, c15, c2, 4 + + /* back to arch calling code */ + mov pc, lr + + /* the literal pools origin */ + .ltorg + +REG_CONTROL_STATUS: + .word CONTROL_STATUS +VAL_INTH_SETUP: + .word PERIFERAL_PORT_BASE +SRAM_STACK: + .word LOW_LEVEL_SRAM_STACK + + + + + + diff --git a/x-loader/board/omap2420h4/x-load.lds b/x-loader/board/omap2420h4/x-load.lds new file mode 100644 index 0000000..f664ca7 --- /dev/null +++ b/x-loader/board/omap2420h4/x-load.lds @@ -0,0 +1,54 @@ +/* + * January 2004 - Changed to support H4 device + * Copyright (c) 2004 Texas Instruments + * + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, <gj@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + . = 0x00000000; + + . = ALIGN(4); + .text : + { + cpu/arm1136/start.o (.text) + *(.text) + } + + . = ALIGN(4); + .rodata : { *(.rodata) } + + . = ALIGN(4); + .data : { *(.data) } + + . = ALIGN(4); + .got : { *(.got) } + + . = ALIGN(4); + __bss_start = .; + .bss : { *(.bss) } + _end = .; +} diff --git a/x-loader/board/omap2430sdp/Makefile b/x-loader/board/omap2430sdp/Makefile new file mode 100644 index 0000000..a9bb3f0 --- /dev/null +++ b/x-loader/board/omap2430sdp/Makefile @@ -0,0 +1,47 @@ +# +# (C) Copyright 2000, 2001, 2002 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = lib$(BOARD).a + +OBJS := omap2430sdp.o +SOBJS := platform.o + +$(LIB): $(OBJS) $(SOBJS) + $(AR) crv $@ $^ + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) + $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ + +-include .depend + +######################################################################### diff --git a/x-loader/board/omap2430sdp/config.mk b/x-loader/board/omap2430sdp/config.mk new file mode 100644 index 0000000..7bc5078 --- /dev/null +++ b/x-loader/board/omap2430sdp/config.mk @@ -0,0 +1,28 @@ +# +# (C) Copyright 2004 +# Texas Instruments, <www.ti.com> +# +# TI H4 board with OMAP2420 (ARM1136) cpu +# see http://www.ti.com/ for more information on Texas Instruments +# +# H4 has 1 bank of 32MB or 64MB mDDR-SDRAM on CS0 +# H4 has 1 bank of 32MB or 00MB mDDR-SDRAM on CS1 +# Physical Address: +# 8000'0000 (bank0) +# A000/0000 (bank1) ES2 will be configurable +# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000 +# (mem base + reserved) + +# 2430 h4 has same mem configuration as h4. + +# For use with external or internal boots. +# CONFIG_PARTIAL_SRAM must be defined to use this. +TEXT_BASE = 0x80e80000 + +# Used with full SRAM boot. +# This is either with a GP system or a signed boot image. +# easiest, and safest way to go if you can. +# Comment out //CONFIG_PARTIAL_SRAM for this one. +# +#TEXT_BASE = 0x40280000 + diff --git a/x-loader/board/omap2430sdp/omap2430sdp.c b/x-loader/board/omap2430sdp/omap2430sdp.c new file mode 100644 index 0000000..f2a7b42 --- /dev/null +++ b/x-loader/board/omap2430sdp/omap2430sdp.c @@ -0,0 +1,746 @@ +/* + * (C) Copyright 2004-2005 + * Texas Instruments, <www.ti.com> + * Jian Zhang <jzhang@ti.com> + * Richard Woodruff <r-woodruff2@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <common.h> +#include <asm/arch/omap2430.h> +#include <asm/arch/bits.h> +#include <asm/arch/mem.h> +#include <asm/arch/sys_info.h> +#include <asm/arch/clocks.h> + +static void wait_for_command_complete(unsigned int wd_base); +static void watchdog_init(void); +static void peripheral_enable(void); +static void muxSetupAll(void); +static u32 get_cpu_rev(void); +static u32 get_device_type(void); +static void prcm_init(void); + + +/******************************************************* + * Routine: delay + * Description: spinning delay to use before udelay works + ******************************************************/ +static inline void delay (unsigned long loops) +{ + __asm__ volatile ("1:\n" + "subs %0, %1, #1\n" + "bne 1b":"=r" (loops):"0" (loops)); +} + +/***************************************** + * Routine: board_init + * Description: Early hardware init. + *****************************************/ +int board_init (void) +{ + return 0; +} + +/****************************************** + * get_cpu_rev(void) - extract version info + ******************************************/ +u32 get_cpu_rev(void) +{ + u32 v; + v = __raw_readl(TAP_IDCODE_REG); + v = v >> 28; + return(v+1); /* currently 2422 and 2420 match up */ +} + +/************************************************************* + * get_device_type(): tell if GP/HS/EMU/TST + *************************************************************/ +u32 get_device_type(void) +{ + int mode; + mode = __raw_readl(CONTROL_STATUS) & (DEVICE_MASK); + return(mode >>= 8); +} + +/************************************************************* + * Helper function to wait for the status of a register + *************************************************************/ +u32 wait_on_value(u32 read_bit_mask, u32 match_value, u32 read_addr, u32 bound) +{ + u32 i = 0, val; + do { + ++i; + val = __raw_readl(read_addr) & read_bit_mask; + if (val == match_value) + return(1); + if (i==bound) + return(0); + } while (1); +} + +/************************************************************* + * Support for multiple type of memory types + *************************************************************/ +#ifdef CFG_SDRAM_DDR +void +config_sdram_ddr(u32 rev) +{ + /* ball D11, mode 0 */ + __raw_writeb(0x08, 0x48000032); + + /* SDRC_CS0 Configuration */ + __raw_writel(H4_2420_SDRC_MDCFG_0_DDR, SDRC_MCFG_0); + __raw_writel(H4_2420_SDRC_SHARING, SDRC_SHARING); + + __raw_writel(H4_242x_SDRC_RFR_CTRL_ES1, SDRC_RFR_CTRL); + __raw_writel(H4_242x_SDRC_ACTIM_CTRLA_0_ES1, SDRC_ACTIM_CTRLA_0); + __raw_writel(H4_242x_SDRC_ACTIM_CTRLB_0_ES1, SDRC_ACTIM_CTRLB_0); + + /* Manual Command sequence */ + __raw_writel(CMD_NOP, SDRC_MANUAL_0); + __raw_writel(CMD_PRECHARGE, SDRC_MANUAL_0); + __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_0); + __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_0); + + + /* + * CS0 SDRC Mode Register + * Burst length = 4 - DDR memory + * Serial mode + * CAS latency = 3 + */ + __raw_writel(0x00000032, SDRC_MR_0); + + /* SDRC DLLA control register */ + /* Delay is 90 degrees */ + /* Enable DLL, Load counter with 115 (middle of range) */ + __raw_writel(0x00000008, SDRC_DLLA_CTRL); // ES2.x + /* Enable DLL, Load counter with 128 (middle of range) */ + __raw_writel(0x00000008, SDRC_DLLB_CTRL); // ES2.x + +} +#endif // CFG_SDRAM_DDR + +#ifdef CFG_SDRAM_COMBO +void +config_sdram_combo(u32 rev) +{ + + u32 dllctrl=0; + + /* ball C12, mode 0 */ + __raw_writeb(0x00, 0x480000a1); + /* ball D11, mode 0 */ + __raw_writeb(0x00, 0x48000032); + /* ball B13, mode 0 - for CKE1 (not needed rkw for combo) */ + __raw_writeb(0x00, 0x480000a3); + + /*configure sdrc 32 bit for COMBO ddr sdram. Issue soft reset */ + __raw_writel(0x00000012, SDRC_SYSCONFIG); + wait_on_value(BIT0, BIT0, SDRC_STATUS, 12000000); /* wait till reset done set */ + __raw_writel(0x00000000, SDRC_SYSCONFIG); + + /* SDRCTriState: no Tris */ + /* CS0MuxCfg: 000 (32-bit SDRAM on D31..0) */ + if (rev == CPU_2420_2422_ES1) + __raw_writel(H4_2422_SDRC_SHARING, SDRC_SHARING); + else + __raw_writel(H4_2420_SDRC_SHARING, SDRC_SHARING); + + + /* CS0 SDRC Memory Configuration, */ + /* DDR-SDRAM, External SDRAM is x32bit, */ + /* Configure to MUX9: 1x8Mbx32 */ + __raw_writel(H4_2420_COMBO_MDCFG_0_DDR, SDRC_MCFG_0); + __raw_writel(H4_2420_SDRC_ACTIM_CTRLA_0, SDRC_ACTIM_CTRLA_0); + __raw_writel(H4_2420_SDRC_ACTIM_CTRLB_0, SDRC_ACTIM_CTRLB_0); + + /* This is reqd only for ES1 */ + if (rev == CPU_242X_ES1) + __raw_writel(H4_242x_SDRC_RFR_CTRL_ES1, SDRC_RFR_CTRL); + + /* Manual Command sequence */ + __raw_writel(CMD_NOP, SDRC_MANUAL_0); + delay(5000); + __raw_writel(CMD_PRECHARGE, SDRC_MANUAL_0); + __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_0); + __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_0); + + /* CS0 SDRC Mode Register */ + /* Burst length = 4 - DDR memory */ + /* Serial mode */ + /* CAS latency = 3 */ + __raw_writel(H4_2422_SDRC_MR_0_DDR, SDRC_MR_0); + + /* CS1 SDRC Memory Configuration, */ + /* DDR-SDRAM, External SDRAM is x32bit, */ + /* Configure to MUX9: 1x8Mbx32 */ + __raw_writel(H4_2420_COMBO_MDCFG_0_DDR, SDRC_MCFG_1); + __raw_writel(H4_242X_SDRC_ACTIM_CTRLA_0_100MHz, SDRC_ACTIM_CTRLA_1); + __raw_writel(H4_2420_SDRC_ACTIM_CTRLB_0, SDRC_ACTIM_CTRLB_1); + /* This is reqd only for ES1 */ + if (rev == CPU_242X_ES1) + __raw_writel(H4_242x_SDRC_RFR_CTRL_ES1, 0x680090d4); + + /* Manual Command sequence */ + __raw_writel(CMD_NOP, 0x680090d8); + __raw_writel(CMD_PRECHARGE, 0x680090d8); + __raw_writel(CMD_AUTOREFRESH, 0x680090d8); + __raw_writel(CMD_AUTOREFRESH, 0x680090d8); + + /* CS1 SDRC Mode Register */ + /* Burst length = 4 - DDR memory */ + /* Serial mode */ + /* CAS latency = 3 */ + __raw_writel(H4_2422_SDRC_MR_0_DDR, 0x680090b4); + + /* SDRC DLLA control register */ + /* Delay is 90 degrees */ + + if (rev == CPU_242X_ES1) + dllctrl = (BIT0|BIT3); + else + dllctrl = BIT0; + + if (rev == CPU_2420_2422_ES1) { + /* Enable DLL, Load counter with 115 (middle of range) */ + __raw_writel(0x00007306, SDRC_DLLA_CTRL); + __raw_writel(0x00007302, SDRC_DLLA_CTRL); + /* Enable DLL, Load counter with 128 (middle of range) */ + __raw_writel(0x00007306, SDRC_DLLB_CTRL); /* load ctr value */ + __raw_writel(0x00007302, SDRC_DLLB_CTRL); /* lock and go */ + } + else { + /* Enable DLL, Load counter with 115 (middle of range) */ + __raw_writel(H4_2420_SDRC_DLLAB_CTRL, SDRC_DLLA_CTRL); // ES2.x + __raw_writel(H4_2420_SDRC_DLLAB_CTRL & ~(LOADDLL|dllctrl), SDRC_DLLA_CTRL); // ES2.x + // __raw_writel(0x00009808, SDRC_DLLA_CTRL); // ES2.x + /* Enable DLL, Load counter with 128 (middle of range) */ + __raw_writel(H4_2420_SDRC_DLLAB_CTRL, SDRC_DLLB_CTRL); // ES2.x ? + __raw_writel(H4_2420_SDRC_DLLAB_CTRL & ~(LOADDLL|dllctrl), SDRC_DLLB_CTRL); // ES2.x + //__raw_writel(0x00009808, SDRC_DLLB_CTRL); // ES2.x + } +} + +#endif // CFG_SDRAM_COMBO + +#ifdef CFG_2430SDRAM_DDR +void +config_2430sdram_ddr(u32 rev) +{ + u32 dllstat, dllctrl; + + __raw_writel(0x00000012, SDRC_SYSCONFIG); + wait_on_value(BIT0, BIT0, SDRC_STATUS, 12000000); /* wait till reset done set */ + __raw_writel(0x00000000, SDRC_SYSCONFIG); + + /* Chip-level shared interface management */ + /* SDRCTriState: no Tris */ + /* CS0MuxCfg: 000 (32-bit SDRAM on D31..0) */ + /* CS1MuxCfg: 000 (32-bit SDRAM on D31..0) */ + __raw_writel(H4_2420_SDRC_SHARING, SDRC_SHARING); + + /* CS0 SDRC Memory Configuration, */ + /* DDR-SDRAM, External SDRAM is x32bit, */ + /* Configure to MUX14: 32Mbx32 */ + __raw_writel(SDP_2430_SDRC_MDCFG_0_DDR, SDRC_MCFG_0); + __raw_writel(SDP_2430_SDRC_ACTIM_CTRLA_0, SDRC_ACTIM_CTRLA_0); + __raw_writel(H4_2420_SDRC_ACTIM_CTRLB_0, SDRC_ACTIM_CTRLB_0); + + __raw_writel(H4_2420_SDRC_RFR_CTRL, SDRC_RFR_CTRL); + + /* Manual Command sequence */ + __raw_writel(CMD_NOP, SDRC_MANUAL_0); + delay(5000); + __raw_writel(CMD_PRECHARGE, SDRC_MANUAL_0); + __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_0); + __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_0); + + /* CS0 SDRC Mode Register */ + /* Burst length = 2 - SDR memory */ + /* Serial mode */ + /* CAS latency = 3 */ + __raw_writel(H4_2420_SDRC_MR_0_DDR, SDRC_MR_0); + + /* Set up SDRC DLL values for 2430 DDR */ + dllctrl = (SDP_2430_SDRC_DLLAB_CTRL & ~BIT2); /* set target ctrl val */ + __raw_writel(dllctrl, SDRC_DLLA_CTRL); /* set lock mode */ + __raw_writel(dllctrl, SDRC_DLLB_CTRL); /* set lock mode */ + delay(0x1000); /* time to track to center */ + dllstat = __raw_readl(SDRC_DLLA_STATUS) & 0xFF00; /* get status */ + dllctrl = (dllctrl & 0x00FF) | dllstat | BIT2; /* build unlock value */ + __raw_writel(dllctrl, SDRC_DLLA_CTRL); /* set unlock mode */ + __raw_writel(dllctrl, SDRC_DLLB_CTRL); /* set unlock mode */ +} +#endif // CFG_2430SDRAM_DDR + +#ifdef CFG_SDRAM_STACKED +void +config_sdram_stacked(u32 rev) +{ + + /* Pin Muxing for SDRC */ + __raw_writeb(0x00, 0x480000a1); /* mux mode 0 (CS1) */ + __raw_writeb(0x00, 0x480000a3); /* mux mode 0 (CKE1) */ + __raw_writeb(0x00, 0x48000032); /* connect sdrc_a12 */ + __raw_writeb(0x00, 0x48000031); /* connect sdrc_a13 */ + + /* configure sdrc 32 bit for COMBO ddr sdram */ + __raw_writel(0x00000010, SDRC_SYSCONFIG); /* no idle ack and RESET enable */ + delay(200000); + __raw_writel(0x00000010, SDRC_SYSCONFIG); /* smart idle mode */ + + /* SDRC_SHARING */ + /* U-boot is writing 0x00000100 though (H4_2420_SDRC_SHARING ) */ + //__raw_writel(H4_2420_SDRC_SHARING, SDRC_SHARING); + + __raw_writel(0x00004900, SDRC_SHARING); + + /* SDRC_CS0 Configuration */ + /* None for ES2.1 */ + + /* SDRC_CS1 Configuration */ + __raw_writel(0x00000000, SDRC_CS_CFG); /* Remap CS1 to 0x80000000 */ + + /* Disable power down of CKE */ + __raw_writel(0x00000085, SDRC_POWER); + + __raw_writel(0x01A02019, SDRC_MCFG_1); /* SDRC_MCFG1 */ + __raw_writel(0x0003DD03, SDRC_RFR_CTRL1); /* SDRC_RFR_CTRL1 */ + __raw_writel(0x92DDC485, SDRC_ACTIM_CTRLA_1); /* SDRC_ACTIM_CTRLA0 */ + __raw_writel(0x00000014, SDRC_ACTIM_CTRLB_1); /* SDRC_ACTIM_CTRLB0 */ + + /*Manual Command sequence */ + __raw_writel(0x00000000, 0x680090D8); + __raw_writel(0x00000001, 0x680090D8); + __raw_writel(0x00000002, 0x680090D8); + __raw_writel(0x00000002, 0x680090D8); + + /* CS0 SDRC Mode Register */ + /* Burst length = 4 - DDR memory */ + /* Serial mode */ + /* CAS latency = 3 */ + __raw_writel(0x00000032, 0x680090B4); + __raw_writel(0x00000020, 0x680090BC); /* weak-strength driver */ + + /* SDRC DLLA control register */ + /* Delay is 90 degrees */ + if (rev == CPU_2420_2422_ES1) { + /* Enable DLL, Load counter with 115 (middle of range) */ + __raw_writel(0x00007302, SDRC_DLLA_CTRL); + /* Enable DLL, Load counter with 128 (middle of range) */ + __raw_writel(0x00007302, SDRC_DLLB_CTRL); + } + else { + /* Enable DLL, Load counter with 115 (middle of range) */ + __raw_writel(0x00003108, SDRC_DLLA_CTRL); // ES2.x + /* Enable DLL, Load counter with 128 (middle of range) */ + __raw_writel(0x00003108, SDRC_DLLB_CTRL); // ES2.x + } +} +#endif // CFG_SDRAM_STACKED + +/************************************************************* + * get_sys_clk_speed - determine reference oscillator speed + * based on known 32kHz clock and gptimer. + *************************************************************/ +u32 get_osc_clk_speed(u32 *shift) +{ +#define GPT_EN ((0<<2)|BIT1|BIT0) /* enable sys_clk NO-prescale /1 */ +#define GPT_CTR OMAP24XX_GPT2+TCRR /* read counter address */ + u32 start, cstart, cend, cdiff, val; + unsigned int v, if_clks=0, func_clks=0 ; + + + + if(__raw_readl(PRCM_CLKSRC_CTRL) & BIT7){ /* if currently /2 */ + *shift = 1; + }else{ + *shift = 0; + } + + /* enable timer2 */ + val = __raw_readl(CM_CLKSEL2_CORE) | 0x4; /* mask for sys_clk use */ + __raw_writel(val, CM_CLKSEL2_CORE); /* timer2 source to sys_clk */ + __raw_writel(BIT4, CM_ICLKEN1_CORE); /* timer2 interface clock on */ + __raw_writel(BIT4, CM_FCLKEN1_CORE); /* timer2 function clock on */ + /* Enable GP2 timer.*/ + if_clks |= BIT4; + func_clks |= BIT4; + v = __raw_readl(CM_ICLKEN1_CORE) | if_clks; /* Interface clocks on */ + __raw_writel(v,CM_ICLKEN1_CORE ); + v = __raw_readl(CM_FCLKEN1_CORE) | func_clks; /* Functional Clocks on */ + __raw_writel(v, CM_FCLKEN1_CORE); + __raw_writel(0, OMAP24XX_GPT2+TLDR); /* start counting at 0 */ + __raw_writel(GPT_EN, OMAP24XX_GPT2+TCLR); /* enable clock */ + /* enable 32kHz source */ /* enabled out of reset */ + /* determine sys_clk via gauging */ + start = 20 + __raw_readl(S32K_CR); /* start time in 20 cycles*/ + while(__raw_readl(S32K_CR) < start); /* dead loop till start time */ + cstart = __raw_readl(GPT_CTR); /* get start sys_clk count */ + while(__raw_readl(S32K_CR) < (start+20)); /* wait for 40 cycles */ + cend = __raw_readl(GPT_CTR); /* get end sys_clk count */ + cdiff = cend - cstart; /* get elapsed ticks */ + /* based on number of ticks assign speed */ + if(cdiff > (19000 >> *shift)) + return(S38_4M); + else if (cdiff > (15200 >> *shift)) + return(S26M); + else if (cdiff > (13000 >> *shift)) + return(S24M); + else if (cdiff > (9000 >> *shift)) + return(S19_2M); + else if (cdiff > (7600 >> *shift)) + return(S13M); + else + return(S12M); +} + +/********************************************************************************* + * prcm_init() - inits clocks for PRCM as defined in clocks.h (config II default). + * -- called from SRAM + *********************************************************************************/ +void +prcm_init() +{ + u32 div, speed, val, div_by_2; + + val = __raw_readl(PRCM_CLKSRC_CTRL) & ~(BIT1 | BIT0); +#if defined(OMAP2430_SQUARE_CLOCK_INPUT) + __raw_writel(val, PRCM_CLKSRC_CTRL); +#else + __raw_writel((val | BIT0), PRCM_CLKSRC_CTRL); +#endif + speed = get_osc_clk_speed(&div_by_2); + if((speed > S19_2M) && (!div_by_2)){ /* if fast && /2 off, enable it */ + val = ~(BIT6|BIT7) & __raw_readl(PRCM_CLKSRC_CTRL); + val |= (0x2 << 6); /* divide by 2 if (24,26,38.4) -> (12/13/19.2) */ + __raw_writel(val, PRCM_CLKSRC_CTRL); + } + + __raw_writel(0, CM_FCLKEN1_CORE); /* stop all clocks to reduce ringing */ + __raw_writel(0, CM_FCLKEN2_CORE); /* may not be necessary */ + __raw_writel(0, CM_ICLKEN1_CORE); + __raw_writel(0, CM_ICLKEN2_CORE); + + /*DPLL into low power bypass (others off) */ + __raw_writel(0x00000001, CM_CLKEN_PLL); + + __raw_writel(DPLL_OUT, CM_CLKSEL2_PLL); /* set DPLL out */ + __raw_writel(MPU_DIV, CM_CLKSEL_MPU); /* set MPU divider */ + __raw_writel(DSP_DIV, CM_CLKSEL_DSP); /* set dsp and iva dividers */ + __raw_writel(GFX_DIV, CM_CLKSEL_GFX); /* set gfx dividers */ + __raw_writel(MDM_DIV, CM_CLKSEL_MDM); /* set mdm dividers */ + + div = BUS_DIV; + __raw_writel(div, CM_CLKSEL1_CORE);/* set L3/L4/USB/Display/SSi dividers */ + delay(1000); + + /*13MHz apll src, PRCM 'x' DPLL rate */ + __raw_writel(DPLL_VAL, CM_CLKSEL1_PLL); + + /*Valid the configuration */ + __raw_writel(0x00000001, PRCM_CLKCFG_CTRL); + delay(1000); + + /* set up APLLS_CLKIN per crystal */ + if (speed > S19_2M) + speed >>= 1; /* if fast shift to /2 range */ + val = (0x2 << 23); /* default to 13Mhz for 2430c */ + if (speed == S12M) + val = (0x3 << 23); + else if (speed == S19_2M) + val = (0x0 << 23); + val |= (~(BIT23|BIT24|BIT25) & __raw_readl(CM_CLKSEL1_PLL)); + __raw_writel(val, CM_CLKSEL1_PLL); + + __raw_writel(DPLL_LOCK|APLL_LOCK, CM_CLKEN_PLL); /* enable apll */ + wait_on_value(BIT8, BIT8, CM_IDLEST_CKGEN, LDELAY);/* wait for apll lock */ + + delay(200000); +} + +void SEC_generic(void) +{ +/* Permission values for registers -Full fledged permissions to all */ +#define UNLOCK_1 0xFFFFFFFF +#define UNLOCK_2 0x00000000 +#define UNLOCK_3 0x0000FFFF + /* Protection Module Register Target APE (PM_RT)*/ + __raw_writel(UNLOCK_1, PM_RT_APE_BASE_ADDR_ARM + 0x68); /* REQ_INFO_PERMISSION_1 L*/ + __raw_writel(UNLOCK_1, PM_RT_APE_BASE_ADDR_ARM + 0x50); /* READ_PERMISSION_0 L*/ + __raw_writel(UNLOCK_1, PM_RT_APE_BASE_ADDR_ARM + 0x58); /* WRITE_PERMISSION_0 L*/ + __raw_writel(UNLOCK_2, PM_RT_APE_BASE_ADDR_ARM + 0x60); /* ADDR_MATCH_1 L*/ + + + __raw_writel(UNLOCK_3, PM_GPMC_BASE_ADDR_ARM + 0x48); /* REQ_INFO_PERMISSION_0 L*/ + __raw_writel(UNLOCK_3, PM_GPMC_BASE_ADDR_ARM + 0x50); /* READ_PERMISSION_0 L*/ + __raw_writel(UNLOCK_3, PM_GPMC_BASE_ADDR_ARM + 0x58); /* WRITE_PERMISSION_0 L*/ + + __raw_writel(UNLOCK_3, PM_OCM_RAM_BASE_ADDR_ARM + 0x48); /* REQ_INFO_PERMISSION_0 L*/ + __raw_writel(UNLOCK_3, PM_OCM_RAM_BASE_ADDR_ARM + 0x50); /* READ_PERMISSION_0 L*/ + __raw_writel(UNLOCK_3, PM_OCM_RAM_BASE_ADDR_ARM + 0x58); /* WRITE_PERMISSION_0 L*/ + __raw_writel(UNLOCK_2, PM_OCM_RAM_BASE_ADDR_ARM + 0x80); /* ADDR_MATCH_2 L*/ + + /* IVA Changes */ + __raw_writel(UNLOCK_3, PM_IVA2_BASE_ADDR_ARM + 0x48); /* REQ_INFO_PERMISSION_0 L*/ + __raw_writel(UNLOCK_3, PM_IVA2_BASE_ADDR_ARM + 0x50); /* READ_PERMISSION_0 L*/ + __raw_writel(UNLOCK_3, PM_IVA2_BASE_ADDR_ARM + 0x58); /* WRITE_PERMISSION_0 L*/ +} + +/********************************************************** + * Routine: try_unlock_sram() + * Description: If chip is GP type, unlock the SRAM for general use. + ***********************************************************/ +void try_unlock_sram(void) +{ + int mode; + + /* if GP device unlock device SRAM for general use */ + mode = get_device_type(); + + if ((mode == GP_DEVICE) || (mode == HS_DEVICE) || (mode == EMU_DEVICE) + || (mode == TST_DEVICE)) { + /* Secure or Emulation device - HS/E/T */ + SEC_generic(); + } + return; +} + +/********************************************************** + * Routine: s_init + * Description: Does early system init of muxing and clocks. + * - Called at time when only stack is available. + **********************************************************/ + +int s_init(int skip) +{ + u32 rev; + + rev = get_cpu_rev(); + + watchdog_init(); + try_unlock_sram(); + muxSetupAll(); + delay(100); + prcm_init(); + +#ifdef CFG_SDRAM_DDR + config_sdram_ddr(rev); +#elif defined(CFG_SDRAM_COMBO) + config_sdram_combo(rev); +#elif defined(CFG_2430SDRAM_DDR) + config_2430sdram_ddr(rev); +#elif defined(CFG_SDRAM_STACKED) + config_sdram_stacked(rev); +#else +#error SDRAM type not supported +#endif + + delay(20000); + peripheral_enable(); + return(0); +} + +/******************************************************* + * Routine: misc_init_r + * Description: Init ethernet (done here so udelay works) + ********************************************************/ +int misc_init_r (void) +{ + return(0); +} + +/**************************************** + * Routine: watchdog_init + * Description: Shut down watch dogs + *****************************************/ +static void watchdog_init(void) +{ +#define GP (BIT8|BIT9) + + /* There are 4 watch dogs. 1 secure, and 3 general purpose. + * I would expect that the ROM takes care of the secure one, + * but we will try also. Of the 3 GP ones, 1 can reset us + * directly, the other 2 only generate MPU interrupts. + */ + __raw_writel(WD_UNLOCK1 ,WD2_BASE+WSPR); + wait_for_command_complete(WD2_BASE); + __raw_writel(WD_UNLOCK2 ,WD2_BASE+WSPR); + +} + +/****************************************************** + * Routine: wait_for_command_complete + * Description: Wait for posting to finish on watchdog + ******************************************************/ +static void wait_for_command_complete(unsigned int wd_base) +{ + int pending = 1; + do { + pending = __raw_readl(wd_base+WWPS); + } while (pending); +} + + +/********************************************** + * Routine: dram_init + * Description: sets uboots idea of sdram size + **********************************************/ +int dram_init (void) +{ + return 0; +} + +/***************************************************************** + * Routine: peripheral_enable + * Description: Enable the clks & power for perifs (GPT2, UART1,...) + ******************************************************************/ +static void peripheral_enable(void) +{ + unsigned int v, if_clks=0, if_clks2 = 0, func_clks=0, func_clks2 = 0; + + /* Enable GP2 timer.*/ + if_clks |= BIT4; + func_clks |= BIT4; + v = __raw_readl(CM_CLKSEL2_CORE) | 0x4; /* Sys_clk input OMAP24XX_GPT2 */ + __raw_writel(v, CM_CLKSEL2_CORE); + __raw_writel(0x1, CM_CLKSEL_WKUP); + +#ifdef CFG_NS16550 + /* Enable UART1 clock */ + func_clks |= BIT21; + if_clks |= BIT21; +#endif + v = __raw_readl(CM_ICLKEN1_CORE) | if_clks; /* Interface clocks on */ + __raw_writel(v,CM_ICLKEN1_CORE ); + v = __raw_readl(CM_ICLKEN2_CORE) | if_clks2; /* Interface clocks on */ + __raw_writel(v, CM_ICLKEN2_CORE); + v = __raw_readl(CM_FCLKEN1_CORE) | func_clks; /* Functional Clocks on */ + __raw_writel(v, CM_FCLKEN1_CORE); + v = __raw_readl(CM_FCLKEN2_CORE) | func_clks2; /* Functional Clocks on */ + __raw_writel(v, CM_FCLKEN2_CORE); + delay(1000); + +} + +/* Do pin muxing for all the devices used in X-Loader */ +#define MUX_VAL(OFFSET,VALUE)\ + __raw_writeb(VALUE, OMAP24XX_CTRL_BASE + OFFSET); +static void muxSetupAll(void) +{ + /* UART 1*/ + MUX_VAL(0x00B1, 0x1B) /* uart1_cts- EN, HI, 3, ->gpio_32 */ + MUX_VAL(0x00B2, 0x1B) /* uart1_rts- EN, HI, 3, ->gpio_8 */ + MUX_VAL(0x00B3, 0x1B) /* uart1_tx- EN, HI, 3, ->gpio_9 */ + MUX_VAL(0x00B4, 0x1B) /* uart1_rx- EN, HI, 3, ->gpio_10 */ + MUX_VAL(0x0107, 0x01) /* ssi1_dat_tx- Dis, 1, ->uart1_tx */ + MUX_VAL(0x0108, 0x01) /* ssi1_flag_tx- Dis, 1, ->uart1_rts */ + MUX_VAL(0x0109, 0x01) /* ssi1_rdy_tx- Dis, 1, ->uart1_cts */ + MUX_VAL(0x010A, 0x01) /* ssi1_dat_rx- Dis, 1, ->uart1_rx */ + + /* Mux settings for SDRC */ + MUX_VAL(0x0054, 0x1B) /* sdrc_a14 - EN, HI, 3, ->gpio_0 */ + MUX_VAL(0x0055, 0x1B) /* sdrc_a13 - EN, HI, 3, ->gpio_1 */ + MUX_VAL(0x0056, 0x00) /* sdrc_a12 - Dis, 0 */ + MUX_VAL(0x0046, 0x00) /* sdrc_ncs1 - Dis, 0 */ + MUX_VAL(0x0048, 0x00) /* sdrc_cke1 - Dis, 0 */ + /* GPMC */ + MUX_VAL(0x0030, 0x00) /* gpmc_clk - Dis, 0 */ + MUX_VAL(0x0032, 0x00) /* gpmc_ncs1- Dis, 0 */ + MUX_VAL(0x0033, 0x00) /* gpmc_ncs2- Dis, 0 */ + MUX_VAL(0x0034, 0x03) /* gpmc_ncs3- Dis, 3, ->gpio_24 */ + MUX_VAL(0x0035, 0x03) /* gpmc_ncs4- Dis, 3, ->gpio_25 */ + MUX_VAL(0x0036, 0x00) /* gpmc_ncs5- Dis, 0 */ + MUX_VAL(0x0037, 0x03) /* gpmc_ncs6- Dis, 3, ->gpio_27 */ + MUX_VAL(0x0038, 0x00) /* gpmc_ncs7- Dis, 0 */ + MUX_VAL(0x0040, 0x18) /* gpmc_wait1- Dis, 0 */ + MUX_VAL(0x0041, 0x18) /* gpmc_wait2- Dis, 0 */ + MUX_VAL(0x0042, 0x1B) /* gpmc_wait3- EN, HI, 3, ->gpio_35 */ + MUX_VAL(0x0085, 0x1B) /* gpmc_a10- EN, HI, 3, ->gpio_3 */ +} + +int nand_init(void) +{ + u32 rev; + + /* GPMC Configuration */ + rev = get_cpu_rev(); + + /* global settings */ + __raw_writel(0x10, GPMC_SYSCONFIG); /* smart idle */ + __raw_writel(0x0, GPMC_IRQENABLE); /* isr's sources masked */ + __raw_writel(0, GPMC_TIMEOUT_CONTROL);/* timeout disable */ +#ifdef CFG_NAND + __raw_writel(0x001, GPMC_CONFIG); /* set nWP, disable limited addr */ +#endif + + /* Set the GPMC Vals . For NAND boot on 2430SDP, NAND is mapped at CS0 + * , NOR at CS1 and MPDB at CS5. And oneNAND boot, we map oneNAND at CS0. + * We configure only GPMC CS0 with required values. Configiring other devices + * at other CS in done in u-boot anyway. So we don't have to bother doing it here. + */ + __raw_writel(0, GPMC_CONFIG7_0); + sdelay(1000); + +#ifdef CFG_NAND + __raw_writel( SMNAND_GPMC_CONFIG1, GPMC_CONFIG1_0); + __raw_writel( SMNAND_GPMC_CONFIG2, GPMC_CONFIG2_0); + __raw_writel( SMNAND_GPMC_CONFIG3, GPMC_CONFIG3_0); + __raw_writel( SMNAND_GPMC_CONFIG4, GPMC_CONFIG4_0); + __raw_writel( SMNAND_GPMC_CONFIG5, GPMC_CONFIG5_0); + __raw_writel( SMNAND_GPMC_CONFIG6, GPMC_CONFIG6_0); + +#else /* CFG_ONENAND */ + __raw_writel( ONENAND_GPMC_CONFIG1, GPMC_CONFIG1_0); + __raw_writel( ONENAND_GPMC_CONFIG2, GPMC_CONFIG2_0); + __raw_writel( ONENAND_GPMC_CONFIG3, GPMC_CONFIG3_0); + __raw_writel( ONENAND_GPMC_CONFIG4, GPMC_CONFIG4_0); + __raw_writel( ONENAND_GPMC_CONFIG5, GPMC_CONFIG5_0); + __raw_writel( ONENAND_GPMC_CONFIG6, GPMC_CONFIG6_0); +#endif + + /* Enable the GPMC Mapping */ + __raw_writel(( ((OMAP24XX_GPMC_CS0_SIZE & 0xF)<<8) | + ((OMAP24XX_GPMC_CS0_MAP>>24) & 0x3F) | + (1<<6) ), GPMC_CONFIG7_0); + sdelay(2000); +#ifdef CFG_NAND + if (nand_chip()){ +#ifdef CFG_PRINTF + printf("Unsupported Chip!\n"); +#endif + return 1; + } +#else + if (onenand_chip()){ +#ifdef CFG_PRINTF + printf("OneNAND Unsupported !\n"); +#endif + return 1; + } + +#endif + return 0; +} + +/* optionally do something like blinking LED */ +void board_hang (void) +{ while (0) {};} diff --git a/x-loader/board/omap2430sdp/platform.S b/x-loader/board/omap2430sdp/platform.S new file mode 100644 index 0000000..f221d7e --- /dev/null +++ b/x-loader/board/omap2430sdp/platform.S @@ -0,0 +1,198 @@ +/* + * Board specific setup info + * + * (C) Copyright 2004-2005 + * Texas Instruments, <www.ti.com> + * Richard Woodruff <r-woodruff2@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <asm/arch/mem.h> +#include <asm/arch/omap2430.h> +#include <asm/arch/clocks.h> + +_TEXT_BASE: + .word TEXT_BASE /* sdram load addr from config.mk */ + +/************************************************************************** + * cpy_clk_code: relocates clock code into SRAM where its safer to execute + * R1 = SRAM destination address. + *************************************************************************/ +.global cpy_clk_code + cpy_clk_code: + /* Copy DPLL code into SRAM */ + adr r0, go_to_speed /* get addr of clock setting code */ + mov r2, #384 /* r2 size to copy (div by 32 bytes) */ + mov r1, r1 /* r1 <- dest address (passed in) */ + add r2, r2, r0 /* r2 <- source end address */ +next2: + ldmia r0!, {r3-r10} /* copy from source address [r0] */ + stmia r1!, {r3-r10} /* copy to target address [r1] */ + cmp r0, r2 /* until source end address [r2] */ + bne next2 + mov pc, lr /* back to caller */ + +/* **************************************************************************** + * go_to_speed: -Moves to bypass, -Commits clock dividers, -puts dpll at speed + * -executed from SRAM. + * R0 = PRCM_CLKCFG_CTRL - addr of valid reg + * R1 = CM_CLKEN_PLL - addr dpll ctlr reg + * R2 = dpll value + * R3 = CM_IDLEST_CKGEN - addr dpll lock wait + ******************************************************************************/ +.global go_to_speed + go_to_speed: + sub sp, sp, #0x4 /* get some stack space */ + str r4, [sp] /* save r4's value */ + + /* move into fast relock bypass */ + ldr r8, pll_ctl_add + mov r4, #0x2 + str r4, [r8] + ldr r4, pll_stat +block: + ldr r8, [r4] /* wait for bypass to take effect */ + and r8, r8, #0x3 + cmp r8, #0x1 + bne block + + /* set new dpll dividers _after_ in bypass */ + ldr r4, pll_div_add + ldr r8, pll_div_val + str r8, [r4] + + /* now prepare GPMC (flash) for new dpll speed */ + /* flash needs to be stable when we jump back to it */ + ldr r4, flash_cfg3_addr + ldr r8, flash_cfg3_val + str r8, [r4] + ldr r4, flash_cfg4_addr + ldr r8, flash_cfg4_val + str r8, [r4] + ldr r4, flash_cfg1_addr + ldr r8, [r4] + orr r8, r8, #0x3 /* up gpmc divider */ + str r8, [r4] + + /* setup to 2x loop though code. The first loop pre-loads the + * icache, the 2nd commits the prcm config, and locks the dpll + */ + mov r4, #0x1000 /* spin spin spin */ + mov r8, #0x4 /* first pass condition & set registers */ + cmp r8, #0x4 +2: + ldrne r8, [r3] /* DPLL lock check */ + and r8, r8, #0x7 + cmp r8, #0x2 + beq 4f +3: + subeq r8, r8, #0x1 + streq r8, [r0] /* commit dividers (2nd time) */ + nop +lloop1: + sub r4, r4, #0x1 /* Loop currently necessary else bad jumps */ + nop + cmp r4, #0x0 + bne lloop1 + mov r4, #0x40000 + cmp r8, #0x1 + nop + streq r2, [r1] /* lock dpll (2nd time) */ + nop +lloop2: + sub r4, r4, #0x1 /* loop currently necessary else bad jumps */ + nop + cmp r4, #0x0 + bne lloop2 + mov r4, #0x40000 + cmp r8, #0x1 + nop + ldreq r8, [r3] /* get lock condition for dpll */ + cmp r8, #0x4 /* first time though? */ + bne 2b + moveq r8, #0x2 /* set to dpll check condition. */ + beq 3b /* if condition not true branch */ +4: + ldr r4, [sp] + add sp, sp, #0x4 /* return stack space */ + mov pc, lr /* back to caller, locked */ + +_go_to_speed: .word go_to_speed + +/* these constants need to be close for PIC code */ +#ifdef CFG_ONENAND +flash_cfg3_addr: + .word GPMC_CONFIG3_0 +flash_cfg3_val: + .word ONENAND_GPMC_CONFIG3 +flash_cfg4_addr: + .word GPMC_CONFIG4_0 +flash_cfg4_val: + .word ONENAND_GPMC_CONFIG4 +flash_cfg1_addr: + .word GPMC_CONFIG1_0 +#else +flash_cfg3_addr: + .word GPMC_CONFIG3_0 +flash_cfg3_val: + .word SMNAND_GPMC_CONFIG3 +flash_cfg4_addr: + .word GPMC_CONFIG4_0 +flash_cfg4_val: + .word SMNAND_GPMC_CONFIG4 +flash_cfg1_addr: + .word GPMC_CONFIG1_0 +#endif +pll_ctl_add: + .word CM_CLKEN_PLL +pll_stat: + .word CM_IDLEST_CKGEN +pll_div_add: + .word CM_CLKSEL1_PLL +pll_div_val: + .word DPLL_VAL /* DPLL setting (300MHz default) */ + +.globl platformsetup +platformsetup: + ldr sp, SRAM_STACK + str ip, [sp] /* stash old link register */ + mov ip, lr /* save link reg across call */ + bl s_init /* go setup pll,mux,memory */ + ldr ip, [sp] /* restore save ip */ + mov lr, ip /* restore link reg */ + + /* map interrupt controller */ + ldr r0, VAL_INTH_SETUP + mcr p15, 0, r0, c15, c2, 4 + + /* back to arch calling code */ + mov pc, lr + + /* the literal pools origin */ + .ltorg + +REG_CONTROL_STATUS: + .word CONTROL_STATUS +VAL_INTH_SETUP: + .word PERIFERAL_PORT_BASE +SRAM_STACK: + .word LOW_LEVEL_SRAM_STACK + diff --git a/x-loader/board/omap2430sdp/x-load.lds b/x-loader/board/omap2430sdp/x-load.lds new file mode 100644 index 0000000..f12e8f8 --- /dev/null +++ b/x-loader/board/omap2430sdp/x-load.lds @@ -0,0 +1,54 @@ +/* + * January 2004 - Changed to support H4 device + * Copyright (c) 2004-2005 Texas Instruments + * + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, <gj@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + . = 0x00000000; + + . = ALIGN(4); + .text : + { + cpu/arm1136/start.o (.text) + *(.text) + } + + . = ALIGN(4); + .rodata : { *(.rodata) } + + . = ALIGN(4); + .data : { *(.data) } + + . = ALIGN(4); + .got : { *(.got) } + + . = ALIGN(4); + __bss_start = .; + .bss : { *(.bss) } + _end = .; +} diff --git a/x-loader/board/omap3430labrador/Makefile b/x-loader/board/omap3430labrador/Makefile new file mode 100644 index 0000000..a5c51b6 --- /dev/null +++ b/x-loader/board/omap3430labrador/Makefile @@ -0,0 +1,47 @@ +# +# (C) Copyright 2000, 2001, 2002 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = lib$(BOARD).a + +OBJS := omap3430sdp.o +SOBJS := platform.o + +$(LIB): $(OBJS) $(SOBJS) + $(AR) crv $@ $^ + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) + $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ + +-include .depend + +######################################################################### diff --git a/x-loader/board/omap3430labrador/config.mk b/x-loader/board/omap3430labrador/config.mk new file mode 100644 index 0000000..d6ad6c5 --- /dev/null +++ b/x-loader/board/omap3430labrador/config.mk @@ -0,0 +1,22 @@ +# +# (C) Copyright 2006 +# Texas Instruments, <www.ti.com> +# +# SDP3430 board uses OMAP3430 (ARM-CortexA8) cpu +# see http://www.ti.com/ for more information on Texas Instruments +# +# SDP3430 has 1 bank of 32MB or 128MB mDDR-SDRAM on CS0 +# SDP3430 has 1 bank of 32MB or 00MB mDDR-SDRAM on CS1 +# Physical Address: +# 8000'0000 (bank0) +# A000'0000 (bank1) - re-mappable below CS1 + +# For use if you want X-Loader to relocate from SRAM to DDR +#TEXT_BASE = 0x80e80000 + +# For XIP in 64K of SRAM or debug (GP device has it all availabe) +# SRAM 40200000-4020FFFF base +# initial stack at 0x4020fffc used in s_init (below xloader). +# The run time stack is (above xloader, 2k below) +# If any globals exist there needs to be room for them also +TEXT_BASE = 0x40208800 diff --git a/x-loader/board/omap3430labrador/omap3430sdp.c b/x-loader/board/omap3430labrador/omap3430sdp.c new file mode 100644 index 0000000..89d9ff1 --- /dev/null +++ b/x-loader/board/omap3430labrador/omap3430sdp.c @@ -0,0 +1,753 @@ +/* + * (C) Copyright 2006-2008 + * Texas Instruments, <www.ti.com> + * Jian Zhang <jzhang@ti.com> + * Richard Woodruff <r-woodruff2@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <common.h> +#include <asm/arch/cpu.h> +#include <asm/arch/bits.h> +#include <asm/arch/mux.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/sys_info.h> +#include <asm/arch/clocks.h> +#include <asm/arch/mem.h> + +/* Used to index into DPLL parameter tables */ +struct dpll_param { + unsigned int m; + unsigned int n; + unsigned int fsel; + unsigned int m2; +}; + +typedef struct dpll_param dpll_param; + +#define MAX_SIL_INDEX 3 + +/* Following functions are exported from lowlevel_init.S */ +extern dpll_param * get_mpu_dpll_param(void); +extern dpll_param * get_iva_dpll_param(void); +extern dpll_param * get_core_dpll_param(void); +extern dpll_param * get_per_dpll_param(void); + +#define __raw_readl(a) (*(volatile unsigned int *)(a)) +#define __raw_writel(v,a) (*(volatile unsigned int *)(a) = (v)) +#define __raw_readw(a) (*(volatile unsigned short *)(a)) +#define __raw_writew(v,a) (*(volatile unsigned short *)(a) = (v)) + +/******************************************************* + * Routine: delay + * Description: spinning delay to use before udelay works + ******************************************************/ +static inline void delay(unsigned long loops) +{ + __asm__ volatile ("1:\n" "subs %0, %1, #1\n" + "bne 1b":"=r" (loops):"0"(loops)); +} + +/***************************************** + * Routine: board_init + * Description: Early hardware init. + *****************************************/ +int board_init (void) +{ + return 0; +} + +/************************************************************* + * get_device_type(): tell if GP/HS/EMU/TST + *************************************************************/ +u32 get_device_type(void) +{ + int mode; + mode = __raw_readl(CONTROL_STATUS) & (DEVICE_MASK); + return(mode >>= 8); +} + +/****************************************** + * get_cpu_rev(void) - extract version info + ******************************************/ +u32 get_cpu_rev(void) +{ + u32 cpuid=0; + /* On ES1.0 the IDCODE register is not exposed on L4 + * so using CPU ID to differentiate + * between ES2.0 and ES1.0. + */ + __asm__ __volatile__("mrc p15, 0, %0, c0, c0, 0":"=r" (cpuid)); + if((cpuid & 0xf) == 0x0) + return CPU_3430_ES1; + else + return CPU_3430_ES2; + +} + +/****************************************** + * cpu_is_3410(void) - returns true for 3410 + ******************************************/ +u32 cpu_is_3410(void) +{ + int status; + if(get_cpu_rev() < CPU_3430_ES2) { + return 0; + } else { + /* read scalability status and return 1 for 3410*/ + status = __raw_readl(CONTROL_SCALABLE_OMAP_STATUS); + /* Check whether MPU frequency is set to 266 MHz which + * is nominal for 3410. If yes return true else false + */ + if (((status >> 8) & 0x3) == 0x2) + return 1; + else + return 0; + } +} + +/***************************************************************** + * sr32 - clear & set a value in a bit range for a 32 bit address + *****************************************************************/ +void sr32(u32 addr, u32 start_bit, u32 num_bits, u32 value) +{ + u32 tmp, msk = 0; + msk = 1 << num_bits; + --msk; + tmp = __raw_readl(addr) & ~(msk << start_bit); + tmp |= value << start_bit; + __raw_writel(tmp, addr); +} + +/********************************************************************* + * wait_on_value() - common routine to allow waiting for changes in + * volatile regs. + *********************************************************************/ +u32 wait_on_value(u32 read_bit_mask, u32 match_value, u32 read_addr, u32 bound) +{ + u32 i = 0, val; + do { + ++i; + val = __raw_readl(read_addr) & read_bit_mask; + if (val == match_value) + return (1); + if (i == bound) + return (0); + } while (1); +} + +#ifdef CFG_3430SDRAM_DDR +/********************************************************************* + * config_3430sdram_ddr() - Init DDR on 3430SDP dev board. + *********************************************************************/ +void config_3430sdram_ddr(void) +{ + /* reset sdrc controller */ + __raw_writel(SOFTRESET, SDRC_SYSCONFIG); + wait_on_value(BIT0, BIT0, SDRC_STATUS, 12000000); + __raw_writel(0, SDRC_SYSCONFIG); + + /* setup sdrc to ball mux */ + __raw_writel(SDP_SDRC_SHARING, SDRC_SHARING); + + /* set mdcfg */ + __raw_writel(SDP_SDRC_MDCFG_0_DDR, SDRC_MCFG_0); + + /* set timing */ + __raw_writel(SDP_SDRC_ACTIM_CTRLA_0, SDRC_ACTIM_CTRLA_0); + __raw_writel(SDP_SDRC_ACTIM_CTRLB_0, SDRC_ACTIM_CTRLB_0); + __raw_writel(SDP_SDRC_RFR_CTRL, SDRC_RFR_CTRL); + + /* init sequence for mDDR/mSDR using manual commands (DDR is different) */ + __raw_writel(CMD_NOP, SDRC_MANUAL_0); + delay(5000); + __raw_writel(CMD_PRECHARGE, SDRC_MANUAL_0); + __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_0); + __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_0); + + /* set mr0 */ + __raw_writel(SDP_SDRC_MR_0_DDR, SDRC_MR_0); + + /* set up dll */ + __raw_writel(SDP_SDRC_DLLAB_CTRL, SDRC_DLLA_CTRL); + delay(0x2000); /* give time to lock */ + +} +#endif // CFG_3430SDRAM_DDR + +/************************************************************* + * get_sys_clk_speed - determine reference oscillator speed + * based on known 32kHz clock and gptimer. + *************************************************************/ +u32 get_osc_clk_speed(void) +{ + u32 start, cstart, cend, cdiff, val; + + val = __raw_readl(PRM_CLKSRC_CTRL); + /* If SYS_CLK is being divided by 2, remove for now */ + val = (val & (~BIT7)) | BIT6; + __raw_writel(val, PRM_CLKSRC_CTRL); + + /* enable timer2 */ + val = __raw_readl(CM_CLKSEL_WKUP) | BIT0; + __raw_writel(val, CM_CLKSEL_WKUP); /* select sys_clk for GPT1 */ + + /* Enable I and F Clocks for GPT1 */ + val = __raw_readl(CM_ICLKEN_WKUP) | BIT0 | BIT2; + __raw_writel(val, CM_ICLKEN_WKUP); + val = __raw_readl(CM_FCLKEN_WKUP) | BIT0; + __raw_writel(val, CM_FCLKEN_WKUP); + + __raw_writel(0, OMAP34XX_GPT1 + TLDR); /* start counting at 0 */ + __raw_writel(GPT_EN, OMAP34XX_GPT1 + TCLR); /* enable clock */ + /* enable 32kHz source *//* enabled out of reset */ + /* determine sys_clk via gauging */ + + start = 20 + __raw_readl(S32K_CR); /* start time in 20 cycles */ + while (__raw_readl(S32K_CR) < start); /* dead loop till start time */ + cstart = __raw_readl(OMAP34XX_GPT1 + TCRR); /* get start sys_clk count */ + while (__raw_readl(S32K_CR) < (start + 20)); /* wait for 40 cycles */ + cend = __raw_readl(OMAP34XX_GPT1 + TCRR); /* get end sys_clk count */ + cdiff = cend - cstart; /* get elapsed ticks */ + + /* based on number of ticks assign speed */ + if (cdiff > 19000) + return (S38_4M); + else if (cdiff > 15200) + return (S26M); + else if (cdiff > 13000) + return (S24M); + else if (cdiff > 9000) + return (S19_2M); + else if (cdiff > 7600) + return (S13M); + else + return (S12M); +} + +/****************************************************************************** + * get_sys_clkin_sel() - returns the sys_clkin_sel field value based on + * -- input oscillator clock frequency. + * + *****************************************************************************/ +void get_sys_clkin_sel(u32 osc_clk, u32 *sys_clkin_sel) +{ + if(osc_clk == S38_4M) + *sys_clkin_sel= 4; + else if(osc_clk == S26M) + *sys_clkin_sel = 3; + else if(osc_clk == S19_2M) + *sys_clkin_sel = 2; + else if(osc_clk == S13M) + *sys_clkin_sel = 1; + else if(osc_clk == S12M) + *sys_clkin_sel = 0; +} + +/****************************************************************************** + * prcm_init() - inits clocks for PRCM as defined in clocks.h + * -- called from SRAM, or Flash (using temp SRAM stack). + *****************************************************************************/ +void prcm_init(void) +{ + u32 osc_clk=0, sys_clkin_sel; + dpll_param *dpll_param_p; + u32 clk_index, sil_index; + + /* Gauge the input clock speed and find out the sys_clkin_sel + * value corresponding to the input clock. + */ + osc_clk = get_osc_clk_speed(); + get_sys_clkin_sel(osc_clk, &sys_clkin_sel); + + sr32(PRM_CLKSEL, 0, 3, sys_clkin_sel); /* set input crystal speed */ + + /* If the input clock is greater than 19.2M always divide/2 */ + if(sys_clkin_sel > 2) { + sr32(PRM_CLKSRC_CTRL, 6, 2, 2);/* input clock divider */ + clk_index = sys_clkin_sel/2; + } else { + sr32(PRM_CLKSRC_CTRL, 6, 2, 1);/* input clock divider */ + clk_index = sys_clkin_sel; + } + + sr32(PRM_CLKSRC_CTRL, 0, 2, 0);/* Bypass mode: T2 inputs a square clock */ + + /* The DPLL tables are defined according to sysclk value and + * silicon revision. The clk_index value will be used to get + * the values for that input sysclk from the DPLL param table + * and sil_index will get the values for that SysClk for the + * appropriate silicon rev. + */ + if(cpu_is_3410()) + sil_index = 2; + else { + if(get_cpu_rev() == CPU_3430_ES1) + sil_index = 0; + else if(get_cpu_rev() == CPU_3430_ES2) + sil_index = 1; + } + + /* Unlock MPU DPLL (slows things down, and needed later) */ + sr32(CM_CLKEN_PLL_MPU, 0, 3, PLL_LOW_POWER_BYPASS); + wait_on_value(BIT0, 0, CM_IDLEST_PLL_MPU, LDELAY); + + /* Getting the base address of Core DPLL param table*/ + dpll_param_p = (dpll_param *)get_core_dpll_param(); + /* Moving it to the right sysclk and ES rev base */ + dpll_param_p = dpll_param_p + MAX_SIL_INDEX*clk_index + sil_index; + /* CORE DPLL */ + /* sr32(CM_CLKSEL2_EMU) set override to work when asleep */ + sr32(CM_CLKEN_PLL, 0, 3, PLL_FAST_RELOCK_BYPASS); + wait_on_value(BIT0, 0, CM_IDLEST_CKGEN, LDELAY); + /* For 3430 ES1.0 Errata 1.50, default value directly doesnt + work. write another value and then default value. */ + sr32(CM_CLKSEL1_EMU, 16, 5, CORE_M3X2 + 1); /* m3x2 */ + sr32(CM_CLKSEL1_EMU, 16, 5, CORE_M3X2); /* m3x2 */ + sr32(CM_CLKSEL1_PLL, 27, 2, dpll_param_p->m2); /* Set M2 */ + sr32(CM_CLKSEL1_PLL, 16, 11, dpll_param_p->m); /* Set M */ + sr32(CM_CLKSEL1_PLL, 8, 7, dpll_param_p->n); /* Set N */ + sr32(CM_CLKSEL1_PLL, 6, 1, 0); /* 96M Src */ + sr32(CM_CLKSEL_CORE, 8, 4, CORE_SSI_DIV); /* ssi */ + sr32(CM_CLKSEL_CORE, 4, 2, CORE_FUSB_DIV); /* fsusb ES1 only */ + sr32(CM_CLKSEL_CORE, 2, 2, CORE_L4_DIV); /* l4 */ + sr32(CM_CLKSEL_CORE, 0, 2, CORE_L3_DIV); /* l3 */ + sr32(CM_CLKSEL_GFX, 0, 3, GFX_DIV); /* gfx */ + sr32(CM_CLKSEL_WKUP, 1, 2, WKUP_RSM); /* reset mgr */ + sr32(CM_CLKEN_PLL, 4, 4, dpll_param_p->fsel); /* FREQSEL */ + sr32(CM_CLKEN_PLL, 0, 3, PLL_LOCK); /* lock mode */ + wait_on_value(BIT0, 1, CM_IDLEST_CKGEN, LDELAY); + + /* Getting the base address to PER DPLL param table*/ + dpll_param_p = (dpll_param *)get_per_dpll_param(); + /* Moving it to the right sysclk base */ + dpll_param_p = dpll_param_p + clk_index; + /* PER DPLL */ + sr32(CM_CLKEN_PLL, 16, 3, PLL_STOP); + wait_on_value(BIT1, 0, CM_IDLEST_CKGEN, LDELAY); + sr32(CM_CLKSEL1_EMU, 24, 5, PER_M6X2); /* set M6 */ + sr32(CM_CLKSEL_CAM, 0, 5, PER_M5X2); /* set M5 */ + sr32(CM_CLKSEL_DSS, 0, 5, PER_M4X2); /* set M4 */ + sr32(CM_CLKSEL_DSS, 8, 5, PER_M3X2); /* set M3 */ + sr32(CM_CLKSEL3_PLL, 0, 5, dpll_param_p->m2); /* set M2 */ + sr32(CM_CLKSEL2_PLL, 8, 11, dpll_param_p->m); /* set m */ + sr32(CM_CLKSEL2_PLL, 0, 7, dpll_param_p->n); /* set n */ + sr32(CM_CLKEN_PLL, 20, 4, dpll_param_p->fsel);/* FREQSEL */ + sr32(CM_CLKEN_PLL, 16, 3, PLL_LOCK); /* lock mode */ + wait_on_value(BIT1, 2, CM_IDLEST_CKGEN, LDELAY); + + /* Getting the base address to MPU DPLL param table*/ + dpll_param_p = (dpll_param *)get_mpu_dpll_param(); + /* Moving it to the right sysclk and ES rev base */ + dpll_param_p = dpll_param_p + MAX_SIL_INDEX*clk_index + sil_index; + /* MPU DPLL (unlocked already) */ + sr32(CM_CLKSEL2_PLL_MPU, 0, 5, dpll_param_p->m2); /* Set M2 */ + sr32(CM_CLKSEL1_PLL_MPU, 8, 11, dpll_param_p->m); /* Set M */ + sr32(CM_CLKSEL1_PLL_MPU, 0, 7, dpll_param_p->n); /* Set N */ + sr32(CM_CLKEN_PLL_MPU, 4, 4, dpll_param_p->fsel); /* FREQSEL */ + sr32(CM_CLKEN_PLL_MPU, 0, 3, PLL_LOCK); /* lock mode */ + wait_on_value(BIT0, 1, CM_IDLEST_PLL_MPU, LDELAY); + + /* Getting the base address to IVA DPLL param table*/ + dpll_param_p = (dpll_param *)get_iva_dpll_param(); + /* Moving it to the right sysclk and ES rev base */ + dpll_param_p = dpll_param_p + MAX_SIL_INDEX*clk_index + sil_index; + /* IVA DPLL (set to 12*20=240MHz) */ + sr32(CM_CLKEN_PLL_IVA2, 0, 3, PLL_STOP); + wait_on_value(BIT0, 0, CM_IDLEST_PLL_IVA2, LDELAY); + sr32(CM_CLKSEL2_PLL_IVA2, 0, 5, dpll_param_p->m2); /* set M2 */ + sr32(CM_CLKSEL1_PLL_IVA2, 8, 11, dpll_param_p->m); /* set M */ + sr32(CM_CLKSEL1_PLL_IVA2, 0, 7, dpll_param_p->n); /* set N */ + sr32(CM_CLKEN_PLL_IVA2, 4, 4, dpll_param_p->fsel); /* FREQSEL */ + sr32(CM_CLKEN_PLL_IVA2, 0, 3, PLL_LOCK); /* lock mode */ + wait_on_value(BIT0, 1, CM_IDLEST_PLL_IVA2, LDELAY); + + /* Set up GPTimers to sys_clk source only */ + sr32(CM_CLKSEL_PER, 0, 8, 0xff); + sr32(CM_CLKSEL_WKUP, 0, 1, 1); + + delay(5000); +} + +/***************************************** + * Routine: secure_unlock + * Description: Setup security registers for access + * (GP Device only) + *****************************************/ +void secure_unlock(void) +{ + /* Permission values for registers -Full fledged permissions to all */ + #define UNLOCK_1 0xFFFFFFFF + #define UNLOCK_2 0x00000000 + #define UNLOCK_3 0x0000FFFF + /* Protection Module Register Target APE (PM_RT)*/ + __raw_writel(UNLOCK_1, RT_REQ_INFO_PERMISSION_1); + __raw_writel(UNLOCK_1, RT_READ_PERMISSION_0); + __raw_writel(UNLOCK_1, RT_WRITE_PERMISSION_0); + __raw_writel(UNLOCK_2, RT_ADDR_MATCH_1); + + __raw_writel(UNLOCK_3, GPMC_REQ_INFO_PERMISSION_0); + __raw_writel(UNLOCK_3, GPMC_READ_PERMISSION_0); + __raw_writel(UNLOCK_3, GPMC_WRITE_PERMISSION_0); + + __raw_writel(UNLOCK_3, OCM_REQ_INFO_PERMISSION_0); + __raw_writel(UNLOCK_3, OCM_READ_PERMISSION_0); + __raw_writel(UNLOCK_3, OCM_WRITE_PERMISSION_0); + __raw_writel(UNLOCK_2, OCM_ADDR_MATCH_2); + + /* IVA Changes */ + __raw_writel(UNLOCK_3, IVA2_REQ_INFO_PERMISSION_0); + __raw_writel(UNLOCK_3, IVA2_READ_PERMISSION_0); + __raw_writel(UNLOCK_3, IVA2_WRITE_PERMISSION_0); + + __raw_writel(UNLOCK_1, SMS_RG_ATT0); /* SDRC region 0 public */ +} + +/********************************************************** + * Routine: try_unlock_sram() + * Description: If chip is GP type, unlock the SRAM for + * general use. + ***********************************************************/ +void try_unlock_memory(void) +{ + int mode; + + /* if GP device unlock device SRAM for general use */ + /* secure code breaks for Secure/Emulation device - HS/E/T*/ + mode = get_device_type(); + if (mode == GP_DEVICE) { + secure_unlock(); + } + return; +} + +/********************************************************** + * Routine: s_init + * Description: Does early system init of muxing and clocks. + * - Called at time when only stack is available. + **********************************************************/ + +void s_init(void) +{ + watchdog_init(); +#ifdef CONFIG_3430_AS_3410 + /* setup the scalability control register for + * 3430 to work in 3410 mode + */ + __raw_writel(0x5ABF,CONTROL_SCALABLE_OMAP_OCP); +#endif + try_unlock_memory(); + set_muxconf_regs(); + delay(100); + prcm_init(); + per_clocks_enable(); + config_3430sdram_ddr(); +} + +/******************************************************* + * Routine: misc_init_r + * Description: Init ethernet (done here so udelay works) + ********************************************************/ +int misc_init_r (void) +{ + return(0); +} + +/****************************************************** + * Routine: wait_for_command_complete + * Description: Wait for posting to finish on watchdog + ******************************************************/ +void wait_for_command_complete(unsigned int wd_base) +{ + int pending = 1; + do { + pending = __raw_readl(wd_base + WWPS); + } while (pending); +} + +/**************************************** + * Routine: watchdog_init + * Description: Shut down watch dogs + *****************************************/ +void watchdog_init(void) +{ + /* There are 3 watch dogs WD1=Secure, WD2=MPU, WD3=IVA. WD1 is + * either taken care of by ROM (HS/EMU) or not accessible (GP). + * We need to take care of WD2-MPU or take a PRCM reset. WD3 + * should not be running and does not generate a PRCM reset. + */ + sr32(CM_FCLKEN_WKUP, 5, 1, 1); + sr32(CM_ICLKEN_WKUP, 5, 1, 1); + wait_on_value(BIT5, 0x20, CM_IDLEST_WKUP, 5); /* some issue here */ + + __raw_writel(WD_UNLOCK1, WD2_BASE + WSPR); + wait_for_command_complete(WD2_BASE); + __raw_writel(WD_UNLOCK2, WD2_BASE + WSPR); +} + +/********************************************** + * Routine: dram_init + * Description: sets uboots idea of sdram size + **********************************************/ +int dram_init (void) +{ + return 0; +} + +/***************************************************************** + * Routine: peripheral_enable + * Description: Enable the clks & power for perifs (GPT2, UART1,...) + ******************************************************************/ +void per_clocks_enable(void) +{ + /* Enable GP2 timer. */ + sr32(CM_CLKSEL_PER, 0, 1, 0x1); /* GPT2 = sys clk */ + sr32(CM_ICLKEN_PER, 3, 1, 0x1); /* ICKen GPT2 */ + sr32(CM_FCLKEN_PER, 3, 1, 0x1); /* FCKen GPT2 */ + +#ifdef CFG_NS16550 +////#ifdef CONFIG_SERIAL3 + sr32(CM_FCLKEN_PER, 11, 1, 0x1); + sr32(CM_ICLKEN_PER, 11, 1, 0x1); +////#else + /* Enable UART1 clocks */ + sr32(CM_FCLKEN1_CORE, 13, 1, 0x1); + sr32(CM_ICLKEN1_CORE, 13, 1, 0x1); +////#endif +#endif + delay(1000); +} + +/* Set MUX for UART, GPMC, SDRC, GPIO */ + +#define MUX_VAL(OFFSET,VALUE)\ + __raw_writew((VALUE), OMAP34XX_CTRL_BASE + (OFFSET)); + +#define CP(x) (CONTROL_PADCONF_##x) +/* + * IEN - Input Enable + * IDIS - Input Disable + * PTD - Pull type Down + * PTU - Pull type Up + * DIS - Pull type selection is inactive + * EN - Pull type selection is active + * M0 - Mode 0 + * The commented string gives the final mux configuration for that pin + */ +#define MUX_DEFAULT()\ + /*SDRC*/\ + MUX_VAL(CP(SDRC_D0), (IEN | PTD | DIS | M0)) /*SDRC_D0*/\ + MUX_VAL(CP(SDRC_D1), (IEN | PTD | DIS | M0)) /*SDRC_D1*/\ + MUX_VAL(CP(SDRC_D2), (IEN | PTD | DIS | M0)) /*SDRC_D2*/\ + MUX_VAL(CP(SDRC_D3), (IEN | PTD | DIS | M0)) /*SDRC_D3*/\ + MUX_VAL(CP(SDRC_D4), (IEN | PTD | DIS | M0)) /*SDRC_D4*/\ + MUX_VAL(CP(SDRC_D5), (IEN | PTD | DIS | M0)) /*SDRC_D5*/\ + MUX_VAL(CP(SDRC_D6), (IEN | PTD | DIS | M0)) /*SDRC_D6*/\ + MUX_VAL(CP(SDRC_D7), (IEN | PTD | DIS | M0)) /*SDRC_D7*/\ + MUX_VAL(CP(SDRC_D8), (IEN | PTD | DIS | M0)) /*SDRC_D8*/\ + MUX_VAL(CP(SDRC_D9), (IEN | PTD | DIS | M0)) /*SDRC_D9*/\ + MUX_VAL(CP(SDRC_D10), (IEN | PTD | DIS | M0)) /*SDRC_D10*/\ + MUX_VAL(CP(SDRC_D11), (IEN | PTD | DIS | M0)) /*SDRC_D11*/\ + MUX_VAL(CP(SDRC_D12), (IEN | PTD | DIS | M0)) /*SDRC_D12*/\ + MUX_VAL(CP(SDRC_D13), (IEN | PTD | DIS | M0)) /*SDRC_D13*/\ + MUX_VAL(CP(SDRC_D14), (IEN | PTD | DIS | M0)) /*SDRC_D14*/\ + MUX_VAL(CP(SDRC_D15), (IEN | PTD | DIS | M0)) /*SDRC_D15*/\ + MUX_VAL(CP(SDRC_D16), (IEN | PTD | DIS | M0)) /*SDRC_D16*/\ + MUX_VAL(CP(SDRC_D17), (IEN | PTD | DIS | M0)) /*SDRC_D17*/\ + MUX_VAL(CP(SDRC_D18), (IEN | PTD | DIS | M0)) /*SDRC_D18*/\ + MUX_VAL(CP(SDRC_D19), (IEN | PTD | DIS | M0)) /*SDRC_D19*/\ + MUX_VAL(CP(SDRC_D20), (IEN | PTD | DIS | M0)) /*SDRC_D20*/\ + MUX_VAL(CP(SDRC_D21), (IEN | PTD | DIS | M0)) /*SDRC_D21*/\ + MUX_VAL(CP(SDRC_D22), (IEN | PTD | DIS | M0)) /*SDRC_D22*/\ + MUX_VAL(CP(SDRC_D23), (IEN | PTD | DIS | M0)) /*SDRC_D23*/\ + MUX_VAL(CP(SDRC_D24), (IEN | PTD | DIS | M0)) /*SDRC_D24*/\ + MUX_VAL(CP(SDRC_D25), (IEN | PTD | DIS | M0)) /*SDRC_D25*/\ + MUX_VAL(CP(SDRC_D26), (IEN | PTD | DIS | M0)) /*SDRC_D26*/\ + MUX_VAL(CP(SDRC_D27), (IEN | PTD | DIS | M0)) /*SDRC_D27*/\ + MUX_VAL(CP(SDRC_D28), (IEN | PTD | DIS | M0)) /*SDRC_D28*/\ + MUX_VAL(CP(SDRC_D29), (IEN | PTD | DIS | M0)) /*SDRC_D29*/\ + MUX_VAL(CP(SDRC_D30), (IEN | PTD | DIS | M0)) /*SDRC_D30*/\ + MUX_VAL(CP(SDRC_D31), (IEN | PTD | DIS | M0)) /*SDRC_D31*/\ + MUX_VAL(CP(SDRC_CLK), (IEN | PTD | DIS | M0)) /*SDRC_CLK*/\ + MUX_VAL(CP(SDRC_DQS0), (IEN | PTD | DIS | M0)) /*SDRC_DQS0*/\ + MUX_VAL(CP(SDRC_DQS1), (IEN | PTD | DIS | M0)) /*SDRC_DQS1*/\ + MUX_VAL(CP(SDRC_DQS2), (IEN | PTD | DIS | M0)) /*SDRC_DQS2*/\ + MUX_VAL(CP(SDRC_DQS3), (IEN | PTD | DIS | M0)) /*SDRC_DQS3*/\ + /*GPMC*/\ + MUX_VAL(CP(GPMC_A1), (IDIS | PTD | DIS | M0)) /*GPMC_A1*/\ + MUX_VAL(CP(GPMC_A2), (IDIS | PTD | DIS | M0)) /*GPMC_A2*/\ + MUX_VAL(CP(GPMC_A3), (IDIS | PTD | DIS | M0)) /*GPMC_A3*/\ + MUX_VAL(CP(GPMC_A4), (IDIS | PTD | DIS | M0)) /*GPMC_A4*/\ + MUX_VAL(CP(GPMC_A5), (IDIS | PTD | DIS | M0)) /*GPMC_A5*/\ + MUX_VAL(CP(GPMC_A6), (IDIS | PTD | DIS | M0)) /*GPMC_A6*/\ + MUX_VAL(CP(GPMC_A7), (IDIS | PTD | DIS | M0)) /*GPMC_A7*/\ + MUX_VAL(CP(GPMC_A8), (IDIS | PTD | DIS | M0)) /*GPMC_A8*/\ + MUX_VAL(CP(GPMC_A9), (IDIS | PTD | DIS | M0)) /*GPMC_A9*/\ + MUX_VAL(CP(GPMC_A10), (IDIS | PTD | DIS | M0)) /*GPMC_A10*/\ + MUX_VAL(CP(GPMC_D0), (IEN | PTD | DIS | M0)) /*GPMC_D0*/\ + MUX_VAL(CP(GPMC_D1), (IEN | PTD | DIS | M0)) /*GPMC_D1*/\ + MUX_VAL(CP(GPMC_D2), (IEN | PTD | DIS | M0)) /*GPMC_D2*/\ + MUX_VAL(CP(GPMC_D3), (IEN | PTD | DIS | M0)) /*GPMC_D3*/\ + MUX_VAL(CP(GPMC_D4), (IEN | PTD | DIS | M0)) /*GPMC_D4*/\ + MUX_VAL(CP(GPMC_D5), (IEN | PTD | DIS | M0)) /*GPMC_D5*/\ + MUX_VAL(CP(GPMC_D6), (IEN | PTD | DIS | M0)) /*GPMC_D6*/\ + MUX_VAL(CP(GPMC_D7), (IEN | PTD | DIS | M0)) /*GPMC_D7*/\ + MUX_VAL(CP(GPMC_D8), (IEN | PTD | DIS | M0)) /*GPMC_D8*/\ + MUX_VAL(CP(GPMC_D9), (IEN | PTD | DIS | M0)) /*GPMC_D9*/\ + MUX_VAL(CP(GPMC_D10), (IEN | PTD | DIS | M0)) /*GPMC_D10*/\ + MUX_VAL(CP(GPMC_D11), (IEN | PTD | DIS | M0)) /*GPMC_D11*/\ + MUX_VAL(CP(GPMC_D12), (IEN | PTD | DIS | M0)) /*GPMC_D12*/\ + MUX_VAL(CP(GPMC_D13), (IEN | PTD | DIS | M0)) /*GPMC_D13*/\ + MUX_VAL(CP(GPMC_D14), (IEN | PTD | DIS | M0)) /*GPMC_D14*/\ + MUX_VAL(CP(GPMC_D15), (IEN | PTD | DIS | M0)) /*GPMC_D15*/\ + MUX_VAL(CP(GPMC_nCS0), (IDIS | PTU | EN | M0)) /*GPMC_nCS0*/\ + MUX_VAL(CP(GPMC_nCS1), (IDIS | PTU | EN | M0)) /*GPMC_nCS1*/\ + MUX_VAL(CP(GPMC_nCS2), (IDIS | PTU | EN | M0)) /*GPMC_nCS2*/\ + MUX_VAL(CP(GPMC_nCS3), (IDIS | PTU | EN | M0)) /*GPMC_nCS3*/\ + MUX_VAL(CP(GPMC_nCS4), (IDIS | PTU | EN | M0)) /*GPMC_nCS4 lab*/\ + MUX_VAL(CP(GPMC_nCS5), (IDIS | PTD | DIS | M0)) /*GPMC_nCS5 lab*/\ + MUX_VAL(CP(GPMC_nCS6), (IEN | PTD | DIS | M1)) /*sys_ndmareq1 lab*/\ + MUX_VAL(CP(GPMC_nCS7), (IEN | PTU | EN | M1)) /*GPMC_IO_DIR lab*/\ + MUX_VAL(CP(GPMC_CLK), (IDIS | PTD | DIS | M0)) /*GPMC_CLK*/\ + MUX_VAL(CP(GPMC_nADV_ALE), (IDIS | PTD | DIS | M0)) /*GPMC_nADV_ALE*/\ + MUX_VAL(CP(GPMC_nOE), (IDIS | PTD | DIS | M0)) /*GPMC_nOE*/\ + MUX_VAL(CP(GPMC_nWE), (IDIS | PTD | DIS | M0)) /*GPMC_nWE*/\ + MUX_VAL(CP(GPMC_nBE0_CLE), (IDIS | PTD | DIS | M0)) /*GPMC_nBE0_CLE*/\ + MUX_VAL(CP(GPMC_nBE1), (IEN | PTD | DIS | M0)) /*GPMC_nBE1 lab*/\ + MUX_VAL(CP(GPMC_nWP), (IEN | PTD | DIS | M0)) /*GPMC_nWP*/\ + MUX_VAL(CP(GPMC_WAIT0), (IEN | PTU | EN | M0)) /*GPMC_WAIT0*/\ + MUX_VAL(CP(GPMC_WAIT1), (IEN | PTU | EN | M0)) /*GPMC_WAIT1*/\ + MUX_VAL(CP(GPMC_WAIT2), (IEN | PTU | EN | M0)) /*gpmc_nWait lab*/\ + MUX_VAL(CP(GPMC_WAIT3), (IEN | PTU | EN | M0)) /*gpmc_nWait lab*/\ + MUX_VAL(CP(DSS_DATA18), (IDIS | PTD | DIS | M0)) /*DSS_DATA18*/\ + MUX_VAL(CP(DSS_DATA19), (IDIS | PTD | DIS | M0)) /*DSS_DATA19*/\ + MUX_VAL(CP(DSS_DATA20), (IDIS | PTD | DIS | M0)) /*DSS_DATA20*/\ + MUX_VAL(CP(CAM_XCLKB), (IDIS | PTD | DIS | M0)) /*CAM_XCLKB*/\ + MUX_VAL(CP(CAM_WEN), (IEN | PTD | DIS | M4)) /*GPIO_167*/\ + MUX_VAL(CP(UART1_TX), (IDIS | PTD | DIS | M0)) /*UART1_TX*/\ + MUX_VAL(CP(UART1_RTS), (IDIS | PTD | DIS | M0)) /*UART1_RTS*/\ + MUX_VAL(CP(UART1_CTS), (IEN | PTU | DIS | M0)) /*UART1_CTS*/\ + MUX_VAL(CP(UART1_RX), (IEN | PTD | DIS | M0)) /*UART1_RX*/\ + MUX_VAL(CP(McBSP1_DX), (IEN | PTD | DIS | M4)) /*GPIO_158*/\ + MUX_VAL(CP(SYS_32K), (IEN | PTD | DIS | M0)) /*SYS_32K*/\ + MUX_VAL(CP(SYS_BOOT0), (IEN | PTD | DIS | M4)) /*GPIO_2 */\ + MUX_VAL(CP(SYS_BOOT1), (IEN | PTD | DIS | M4)) /*GPIO_3 */\ + MUX_VAL(CP(SYS_BOOT2), (IEN | PTD | DIS | M4)) /*GPIO_4 */\ + MUX_VAL(CP(SYS_BOOT3), (IEN | PTD | DIS | M4)) /*GPIO_5 */\ + MUX_VAL(CP(SYS_BOOT4), (IEN | PTD | DIS | M4)) /*GPIO_6 */\ + MUX_VAL(CP(SYS_BOOT5), (IEN | PTD | DIS | M4)) /*GPIO_7 */\ + MUX_VAL(CP(SYS_BOOT6), (IEN | PTD | DIS | M4)) /*GPIO_8 */\ + MUX_VAL(CP(SYS_CLKOUT1), (IDIS | PTD | DIS | M0)) /*sys_clkout2 lab*/\ + MUX_VAL(CP(SYS_CLKOUT2), (IDIS | PTD | DIS | M0)) /*sys_clkout2 lab*/\ + MUX_VAL(CP(JTAG_nTRST), (IEN | PTD | DIS | M0)) /*JTAG_nTRST*/\ + MUX_VAL(CP(JTAG_TCK), (IEN | PTD | DIS | M0)) /*JTAG_TCK*/\ + MUX_VAL(CP(JTAG_TMS), (IEN | PTD | DIS | M0)) /*JTAG_TMS*/\ + MUX_VAL(CP(JTAG_TDI), (IEN | PTD | DIS | M0)) /*JTAG_TDI*/\ + MUX_VAL(CP(JTAG_EMU0), (IEN | PTD | DIS | M0)) /*JTAG_EMU0*/\ + MUX_VAL(CP(JTAG_EMU1), (IEN | PTD | DIS | M0)) /*JTAG_EMU1*/\ + MUX_VAL(CP(ETK_CLK), (IEN | PTD | DIS | M4)) /*GPIO_12*/\ + MUX_VAL(CP(ETK_CTL), (IEN | PTD | DIS | M4)) /*GPIO_13*/\ + MUX_VAL(CP(ETK_D0 ), (IEN | PTD | DIS | M4)) /*GPIO_14*/\ + MUX_VAL(CP(ETK_D1 ), (IEN | PTD | DIS | M4)) /*GPIO_15*/\ + MUX_VAL(CP(ETK_D2 ), (IEN | PTD | DIS | M4)) /*GPIO_16*/\ + MUX_VAL(CP(ETK_D10), (IEN | PTD | DIS | M4)) /*GPIO_24*/\ + MUX_VAL(CP(ETK_D11), (IEN | PTD | DIS | M4)) /*GPIO_25*/\ + MUX_VAL(CP(ETK_D12), (IEN | PTD | DIS | M4)) /*GPIO_26*/\ + MUX_VAL(CP(ETK_D13), (IEN | PTD | DIS | M4)) /*GPIO_27*/\ + MUX_VAL(CP(ETK_D14), (IEN | PTD | DIS | M4)) /*GPIO_28*/\ + MUX_VAL(CP(ETK_D15), (IEN | PTD | DIS | M4)) /*GPIO_29*/\ + MUX_VAL(CP(UART3_CTS_RCTX), (IEN | PTD | EN | M0)) /*UART3_CTS_RCTX */\ + MUX_VAL(CP(UART3_RTS_SD), (IDIS | PTD | DIS | M0)) /*UART3_RTS_SD */\ + MUX_VAL(CP(UART3_RX_IRRX ), (IEN | PTD | DIS | M0)) /*UART3_RX_IRRX*/\ + MUX_VAL(CP(UART3_TX_IRTX ), (IDIS | PTD | DIS | M0)) /*UART3_TX_IRTX*/\ + MUX_VAL(CP(sdrc_cke0), (IDIS | PTU | EN | M0)) /*sdrc_cke0 */\ + MUX_VAL(CP(sdrc_cke1), (IDIS | PTD | DIS | M7)) /*sdrc_cke1 not used*/ +/********************************************************** + * Routine: set_muxconf_regs + * Description: Setting up the configuration Mux registers + * specific to the hardware. Many pins need + * to be moved from protect to primary mode. + *********************************************************/ +void set_muxconf_regs(void) +{ + MUX_DEFAULT(); +} + +/********************************************************** + * Routine: nand+_init + * Description: Set up nand for nand and jffs2 commands + *********************************************************/ +int nand_init(void) +{ + /* global settings */ + __raw_writel(0x10, GPMC_SYSCONFIG); /* smart idle */ + __raw_writel(0x0, GPMC_IRQENABLE); /* isr's sources masked */ + __raw_writel(0, GPMC_TIMEOUT_CONTROL);/* timeout disable */ +#ifdef CFG_NAND + __raw_writel(0x001, GPMC_CONFIG); /* set nWP, disable limited addr */ +#endif + + /* setup CS0 for Micron NAND, leave other CS's to u-boot */ + __raw_writel(0 , GPMC_CONFIG7 + GPMC_CONFIG_CS0); + delay(1000); + +#ifdef CFG_NAND + __raw_writel( M_NAND_GPMC_CONFIG1, GPMC_CONFIG1 + GPMC_CONFIG_CS0); + __raw_writel( M_NAND_GPMC_CONFIG2, GPMC_CONFIG2 + GPMC_CONFIG_CS0); + __raw_writel( M_NAND_GPMC_CONFIG3, GPMC_CONFIG3 + GPMC_CONFIG_CS0); + __raw_writel( M_NAND_GPMC_CONFIG4, GPMC_CONFIG4 + GPMC_CONFIG_CS0); + __raw_writel( M_NAND_GPMC_CONFIG5, GPMC_CONFIG5 + GPMC_CONFIG_CS0); + __raw_writel( M_NAND_GPMC_CONFIG6, GPMC_CONFIG6 + GPMC_CONFIG_CS0); + +#else /* CFG_ONENAND */ + __raw_writel( ONENAND_GPMC_CONFIG1, GPMC_CONFIG1 + GPMC_CONFIG_CS0); + __raw_writel( ONENAND_GPMC_CONFIG2, GPMC_CONFIG2 + GPMC_CONFIG_CS0); + __raw_writel( ONENAND_GPMC_CONFIG3, GPMC_CONFIG3 + GPMC_CONFIG_CS0); + __raw_writel( ONENAND_GPMC_CONFIG4, GPMC_CONFIG4 + GPMC_CONFIG_CS0); + __raw_writel( ONENAND_GPMC_CONFIG5, GPMC_CONFIG5 + GPMC_CONFIG_CS0); + __raw_writel( ONENAND_GPMC_CONFIG6, GPMC_CONFIG6 + GPMC_CONFIG_CS0); +#endif + + /* Enable the GPMC Mapping */ + __raw_writel(( ((OMAP34XX_GPMC_CS0_SIZE & 0xF)<<8) | + ((OMAP34XX_GPMC_CS0_MAP>>24) & 0x3F) | + (1<<6) ), (GPMC_CONFIG7 + GPMC_CONFIG_CS0)); + delay(2000); + +#ifdef CFG_NAND + if (nand_chip()){ +#ifdef CFG_PRINTF + printf("Unsupported Chip!\n"); +#endif + return 1; + } +#else + if (onenand_chip()){ +#ifdef CFG_PRINTF + printf("OneNAND Unsupported !\n"); +#endif + return 1; + } +#endif + return 0; +} + +/* optionally do something like blinking LED */ +void board_hang (void) +{ while (0) {};} diff --git a/x-loader/board/omap3430labrador/platform.S b/x-loader/board/omap3430labrador/platform.S new file mode 100644 index 0000000..5869270 --- /dev/null +++ b/x-loader/board/omap3430labrador/platform.S @@ -0,0 +1,360 @@ +/* + * Board specific setup info + * + * (C) Copyright 2004-2006 + * Texas Instruments, <www.ti.com> + * Richard Woodruff <r-woodruff2@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <asm/arch/cpu.h> +#include <asm/arch/mem.h> +#include <asm/arch/clocks.h> + +_TEXT_BASE: + .word TEXT_BASE /* sdram load addr from config.mk */ + +#if !defined(CFG_NAND_BOOT) && !defined(CFG_NAND_BOOT) +/************************************************************************** + * cpy_clk_code: relocates clock code into SRAM where its safer to execute + * R1 = SRAM destination address. + *************************************************************************/ +.global cpy_clk_code + cpy_clk_code: + /* Copy DPLL code into SRAM */ + adr r0, go_to_speed /* get addr of clock setting code */ + mov r2, #384 /* r2 size to copy (div by 32 bytes) */ + mov r1, r1 /* r1 <- dest address (passed in) */ + add r2, r2, r0 /* r2 <- source end address */ +next2: + ldmia r0!, {r3-r10} /* copy from source address [r0] */ + stmia r1!, {r3-r10} /* copy to target address [r1] */ + cmp r0, r2 /* until source end address [r2] */ + bne next2 + mov pc, lr /* back to caller */ + +/* **************************************************************************** + * NOTE: 3430 X-loader currently does not use this code. +* It could be removed its is kept for compatabily with u-boot. + * + * go_to_speed: -Moves to bypass, -Commits clock dividers, -puts dpll at speed + * -executed from SRAM. + * R0 = CM_CLKEN_PLL-bypass value + * R1 = CM_CLKSEL1_PLL-m, n, and divider values + * R2 = CM_CLKSEL_CORE-divider values + * R3 = CM_IDLEST_CKGEN - addr dpll lock wait + * + * Note: If core unlocks/relocks and SDRAM is running fast already it gets + * confused. A reset of the controller gets it back. Taking away its + * L3 when its not in self refresh seems bad for it. Normally, this code + * runs from flash before SDR is init so that should be ok. + ******************************************************************************/ +.global go_to_speed + go_to_speed: + stmfd sp!, {r4-r6} + + /* move into fast relock bypass */ + ldr r4, pll_ctl_add + str r0, [r4] +wait1: + ldr r5, [r3] /* get status */ + and r5, r5, #0x1 /* isolate core status */ + cmp r5, #0x1 /* still locked? */ + beq wait1 /* if lock, loop */ + + /* set new dpll dividers _after_ in bypass */ + ldr r5, pll_div_add1 + str r1, [r5] /* set m, n, m2 */ + ldr r5, pll_div_add2 + str r2, [r5] /* set l3/l4/.. dividers*/ + ldr r5, pll_div_add3 /* wkup */ + ldr r2, pll_div_val3 /* rsm val */ + str r2, [r5] + ldr r5, pll_div_add4 /* gfx */ + ldr r2, pll_div_val4 + str r2, [r5] + ldr r5, pll_div_add5 /* emu */ + ldr r2, pll_div_val5 + str r2, [r5] + + /* now prepare GPMC (flash) for new dpll speed */ + /* flash needs to be stable when we jump back to it */ + ldr r5, flash_cfg3_addr + ldr r2, flash_cfg3_val + str r2, [r5] + ldr r5, flash_cfg4_addr + ldr r2, flash_cfg4_val + str r2, [r5] + ldr r5, flash_cfg5_addr + ldr r2, flash_cfg5_val + str r2, [r5] + ldr r5, flash_cfg1_addr + ldr r2, [r5] + orr r2, r2, #0x3 /* up gpmc divider */ + str r2, [r5] + + /* lock DPLL3 and wait a bit */ + orr r0, r0, #0x7 /* set up for lock mode */ + str r0, [r4] /* lock */ + nop /* ARM slow at this point working at sys_clk */ + nop + nop + nop +wait2: + ldr r5, [r3] /* get status */ + and r5, r5, #0x1 /* isolate core status */ + cmp r5, #0x1 /* still locked? */ + bne wait2 /* if lock, loop */ + nop + nop + nop + nop + ldmfd sp!, {r4-r6} + mov pc, lr /* back to caller, locked */ + +_go_to_speed: .word go_to_speed + +/* these constants need to be close for PIC code */ +/* The Nor has to be in the Flash Base CS0 for this condition to happen */ +flash_cfg1_addr: + .word (GPMC_CONFIG_CS0 + GPMC_CONFIG1) +flash_cfg3_addr: + .word (GPMC_CONFIG_CS0 + GPMC_CONFIG3) +flash_cfg3_val: + .word STNOR_GPMC_CONFIG3 +flash_cfg4_addr: + .word (GPMC_CONFIG_CS0 + GPMC_CONFIG4) +flash_cfg4_val: + .word STNOR_GPMC_CONFIG4 +flash_cfg5_val: + .word STNOR_GPMC_CONFIG5 +flash_cfg5_addr: + .word (GPMC_CONFIG_CS0 + GPMC_CONFIG5) +pll_ctl_add: + .word CM_CLKEN_PLL +pll_div_add1: + .word CM_CLKSEL1_PLL +pll_div_add2: + .word CM_CLKSEL_CORE +pll_div_add3: + .word CM_CLKSEL_WKUP +pll_div_val3: + .word (WKUP_RSM << 1) +pll_div_add4: + .word CM_CLKSEL_GFX +pll_div_val4: + .word (GFX_DIV << 0) +pll_div_add5: + .word CM_CLKSEL1_EMU +pll_div_val5: + .word CLSEL1_EMU_VAL + +#endif + +.globl lowlevel_init +lowlevel_init: + ldr sp, SRAM_STACK + str ip, [sp] /* stash old link register */ + mov ip, lr /* save link reg across call */ + bl s_init /* go setup pll,mux,memory */ + ldr ip, [sp] /* restore save ip */ + mov lr, ip /* restore link reg */ + + /* back to arch calling code */ + mov pc, lr + + /* the literal pools origin */ + .ltorg + +REG_CONTROL_STATUS: + .word CONTROL_STATUS +SRAM_STACK: + .word LOW_LEVEL_SRAM_STACK + +/* DPLL(1-4) PARAM TABLES */ +/* Each of the tables has M, N, FREQSEL, M2 values defined for nominal + * OPP (1.2V). The fields are defined according to dpll_param struct(clock.c). + * The values are defined for all possible sysclk and for ES1 and ES2. + */ + +mpu_dpll_param: +/* 12MHz */ +/* ES1 */ +.word 0x0FE,0x07,0x05,0x01 +/* ES2 */ +.word 0x0FA,0x05,0x07,0x01 +/* 3410 */ +.word 0x085,0x05,0x07,0x01 + +/* 13MHz */ +/* ES1 */ +.word 0x17D,0x0C,0x03,0x01 +/* ES2 */ +.word 0x1F4,0x0C,0x03,0x01 +/* 3410 */ +.word 0x10A,0x0C,0x03,0x01 + +/* 19.2MHz */ +/* ES1 */ +.word 0x179,0x12,0x04,0x01 +/* ES2 */ +.word 0x271,0x17,0x03,0x01 +/* 3410 */ +.word 0x14C,0x17,0x03,0x01 + +/* 26MHz */ +/* ES1 */ +.word 0x17D,0x19,0x03,0x01 +/* ES2 */ +.word 0x0FA,0x0C,0x07,0x01 +/* 3410 */ +.word 0x085,0x0C,0x07,0x01 + +/* 38.4MHz */ +/* ES1 */ +.word 0x1FA,0x32,0x03,0x01 +/* ES2 */ +.word 0x271,0x2F,0x03,0x01 +/* 3410 */ +.word 0x14C,0x2F,0x03,0x01 + + +.globl get_mpu_dpll_param +get_mpu_dpll_param: + adr r0, mpu_dpll_param + mov pc, lr + +iva_dpll_param: +/* 12MHz */ +/* ES1 */ +.word 0x07D,0x05,0x07,0x01 +/* ES2 */ +.word 0x0B4,0x05,0x07,0x01 +/* 3410 */ +.word 0x085,0x05,0x07,0x01 + +/* 13MHz */ +/* ES1 */ +.word 0x0FA,0x0C,0x03,0x01 +/* ES2 */ +.word 0x168,0x0C,0x03,0x01 +/* 3410 */ +.word 0x10A,0x0C,0x03,0x01 + +/* 19.2MHz */ +/* ES1 */ +.word 0x082,0x09,0x07,0x01 +/* ES2 */ +.word 0x0E1,0x0B,0x06,0x01 +/* 3410 */ +.word 0x14C,0x17,0x03,0x01 + +/* 26MHz */ +/* ES1 */ +.word 0x07D,0x0C,0x07,0x01 +/* ES2 */ +.word 0x0B4,0x0C,0x07,0x01 +/* 3410 */ +.word 0x085,0x0C,0x07,0x01 + +/* 38.4MHz */ +/* ES1 */ +.word 0x13F,0x30,0x03,0x01 +/* ES2 */ +.word 0x0E1,0x17,0x06,0x01 +/* 3410 */ +.word 0x14C,0x2F,0x03,0x01 + + +.globl get_iva_dpll_param +get_iva_dpll_param: + adr r0, iva_dpll_param + mov pc, lr + +/* Core DPLL targets for L3 at 166 & L133 */ +core_dpll_param: +/* 12MHz */ +/* ES1 */ +.word M_12_ES1,M_12_ES1,FSL_12_ES1,M2_12_ES1 +/* ES2 */ +.word M_12,N_12,FSEL_12,M2_12 +/* 3410 */ +.word M_12,N_12,FSEL_12,M2_12 + +/* 13MHz */ +/* ES1 */ +.word M_13_ES1,N_13_ES1,FSL_13_ES1,M2_13_ES1 +/* ES2 */ +.word M_13,N_13,FSEL_13,M2_13 +/* 3410 */ +.word M_13,N_13,FSEL_13,M2_13 + +/* 19.2MHz */ +/* ES1 */ +.word M_19p2_ES1,N_19p2_ES1,FSL_19p2_ES1,M2_19p2_ES1 +/* ES2 */ +.word M_19p2,N_19p2,FSEL_19p2,M2_19p2 +/* 3410 */ +.word M_19p2,N_19p2,FSEL_19p2,M2_19p2 + +/* 26MHz */ +/* ES1 */ +.word M_26_ES1,N_26_ES1,FSL_26_ES1,M2_26_ES1 +/* ES2 */ +.word M_26,N_26,FSEL_26,M2_26 +/* 3410 */ +.word M_26,N_26,FSEL_26,M2_26 + +/* 38.4MHz */ +/* ES1 */ +.word M_38p4_ES1,N_38p4_ES1,FSL_38p4_ES1,M2_38p4_ES1 +/* ES2 */ +.word M_38p4,N_38p4,FSEL_38p4,M2_38p4 +/* 3410 */ +.word M_38p4,N_38p4,FSEL_38p4,M2_38p4 + +.globl get_core_dpll_param +get_core_dpll_param: + adr r0, core_dpll_param + mov pc, lr + +/* PER DPLL values are same for both ES1 and ES2 */ +per_dpll_param: +/* 12MHz */ +.word 0xD8,0x05,0x07,0x09 + +/* 13MHz */ +.word 0x1B0,0x0C,0x03,0x09 + +/* 19.2MHz */ +.word 0xE1,0x09,0x07,0x09 + +/* 26MHz */ +.word 0xD8,0x0C,0x07,0x09 + +/* 38.4MHz */ +.word 0xE1,0x13,0x07,0x09 + +.globl get_per_dpll_param +get_per_dpll_param: + adr r0, per_dpll_param + mov pc, lr + diff --git a/x-loader/board/omap3430labrador/x-load.lds b/x-loader/board/omap3430labrador/x-load.lds new file mode 100644 index 0000000..9402f74 --- /dev/null +++ b/x-loader/board/omap3430labrador/x-load.lds @@ -0,0 +1,54 @@ +/* + * November 2006 - Changed to support 3430sdp device + * Copyright (c) 2004-2006 Texas Instruments + * + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, <gj@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + . = 0x00000000; + + . = ALIGN(4); + .text : + { + cpu/omap3/start.o (.text) + *(.text) + } + + . = ALIGN(4); + .rodata : { *(.rodata) } + + . = ALIGN(4); + .data : { *(.data) } + + . = ALIGN(4); + .got : { *(.got) } + + . = ALIGN(4); + __bss_start = .; + .bss : { *(.bss) } + _end = .; +} diff --git a/x-loader/board/omap3430sdp/Makefile b/x-loader/board/omap3430sdp/Makefile new file mode 100644 index 0000000..f5fd240 --- /dev/null +++ b/x-loader/board/omap3430sdp/Makefile @@ -0,0 +1,47 @@ +# +# (C) Copyright 2000, 2001, 2002 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = lib$(BOARD).a + +OBJS := omap3430sdp.o +SOBJS := platform.o + +$(LIB): $(OBJS) $(SOBJS) + $(AR) crv $@ $^ + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) + $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ + +-include .depend + +######################################################################### diff --git a/x-loader/board/omap3430sdp/config.mk b/x-loader/board/omap3430sdp/config.mk new file mode 100644 index 0000000..d6ad6c5 --- /dev/null +++ b/x-loader/board/omap3430sdp/config.mk @@ -0,0 +1,22 @@ +# +# (C) Copyright 2006 +# Texas Instruments, <www.ti.com> +# +# SDP3430 board uses OMAP3430 (ARM-CortexA8) cpu +# see http://www.ti.com/ for more information on Texas Instruments +# +# SDP3430 has 1 bank of 32MB or 128MB mDDR-SDRAM on CS0 +# SDP3430 has 1 bank of 32MB or 00MB mDDR-SDRAM on CS1 +# Physical Address: +# 8000'0000 (bank0) +# A000'0000 (bank1) - re-mappable below CS1 + +# For use if you want X-Loader to relocate from SRAM to DDR +#TEXT_BASE = 0x80e80000 + +# For XIP in 64K of SRAM or debug (GP device has it all availabe) +# SRAM 40200000-4020FFFF base +# initial stack at 0x4020fffc used in s_init (below xloader). +# The run time stack is (above xloader, 2k below) +# If any globals exist there needs to be room for them also +TEXT_BASE = 0x40208800 diff --git a/x-loader/board/omap3430sdp/omap3430sdp.c b/x-loader/board/omap3430sdp/omap3430sdp.c new file mode 100644 index 0000000..6ed62bc --- /dev/null +++ b/x-loader/board/omap3430sdp/omap3430sdp.c @@ -0,0 +1,779 @@ +/* + * (C) Copyright 2006 + * Texas Instruments, <www.ti.com> + * Jian Zhang <jzhang@ti.com> + * Richard Woodruff <r-woodruff2@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <common.h> +#include <command.h> +#include <part.h> +#include <fat.h> +#include <asm/arch/cpu.h> +#include <asm/arch/bits.h> +#include <asm/arch/mux.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/sys_info.h> +#include <asm/arch/clocks.h> +#include <asm/arch/mem.h> + +/* Used to index into DPLL parameter tables */ +struct dpll_param { + unsigned int m; + unsigned int n; + unsigned int fsel; + unsigned int m2; +}; + +typedef struct dpll_param dpll_param; + +#define MAX_SIL_INDEX 3 + +/* Following functions are exported from lowlevel_init.S */ +extern dpll_param * get_mpu_dpll_param(); +extern dpll_param * get_iva_dpll_param(); +extern dpll_param * get_core_dpll_param(); +extern dpll_param * get_per_dpll_param(); + +#define __raw_readl(a) (*(volatile unsigned int *)(a)) +#define __raw_writel(v,a) (*(volatile unsigned int *)(a) = (v)) +#define __raw_readw(a) (*(volatile unsigned short *)(a)) +#define __raw_writew(v,a) (*(volatile unsigned short *)(a) = (v)) + +/******************************************************* + * Routine: delay + * Description: spinning delay to use before udelay works + ******************************************************/ +static inline void delay(unsigned long loops) +{ + __asm__ volatile ("1:\n" "subs %0, %1, #1\n" + "bne 1b":"=r" (loops):"0"(loops)); +} + +/***************************************** + * Routine: board_init + * Description: Early hardware init. + *****************************************/ +int board_init (void) +{ + return 0; +} + +/************************************************************* + * get_device_type(): tell if GP/HS/EMU/TST + *************************************************************/ +u32 get_device_type(void) +{ + int mode; + mode = __raw_readl(CONTROL_STATUS) & (DEVICE_MASK); + return(mode >>= 8); +} + +/****************************************** + * get_cpu_rev(void) - extract version info + ******************************************/ +u32 get_cpu_rev(void) +{ + u32 cpuid=0; + /* On ES1.0 the IDCODE register is not exposed on L4 + * so using CPU ID to differentiate + * between ES2.0 and ES1.0. + */ + __asm__ __volatile__("mrc p15, 0, %0, c0, c0, 0":"=r" (cpuid)); + if((cpuid & 0xf) == 0x0) + return CPU_3430_ES1; + else + return CPU_3430_ES2; + +} + +/****************************************** + * cpu_is_3410(void) - returns true for 3410 + ******************************************/ +u32 cpu_is_3410(void) +{ + int status; + if(get_cpu_rev() < CPU_3430_ES2) { + return 0; + } else { + /* read scalability status and return 1 for 3410*/ + status = __raw_readl(CONTROL_SCALABLE_OMAP_STATUS); + /* Check whether MPU frequency is set to 266 MHz which + * is nominal for 3410. If yes return true else false + */ + if (((status >> 8) & 0x3) == 0x2) + return 1; + else + return 0; + } +} + +/***************************************************************** + * sr32 - clear & set a value in a bit range for a 32 bit address + *****************************************************************/ +void sr32(u32 addr, u32 start_bit, u32 num_bits, u32 value) +{ + u32 tmp, msk = 0; + msk = 1 << num_bits; + --msk; + tmp = __raw_readl(addr) & ~(msk << start_bit); + tmp |= value << start_bit; + __raw_writel(tmp, addr); +} + +/********************************************************************* + * wait_on_value() - common routine to allow waiting for changes in + * volatile regs. + *********************************************************************/ +u32 wait_on_value(u32 read_bit_mask, u32 match_value, u32 read_addr, u32 bound) +{ + u32 i = 0, val; + do { + ++i; + val = __raw_readl(read_addr) & read_bit_mask; + if (val == match_value) + return (1); + if (i == bound) + return (0); + } while (1); +} + +#ifdef CFG_3430SDRAM_DDR +/********************************************************************* + * config_3430sdram_ddr() - Init DDR on 3430SDP dev board. + *********************************************************************/ +void config_3430sdram_ddr(void) +{ + /* reset sdrc controller */ + __raw_writel(SOFTRESET, SDRC_SYSCONFIG); + wait_on_value(BIT0, BIT0, SDRC_STATUS, 12000000); + __raw_writel(0, SDRC_SYSCONFIG); + + /* setup sdrc to ball mux */ + __raw_writel(SDP_SDRC_SHARING, SDRC_SHARING); + + /* set mdcfg */ + __raw_writel(SDP_SDRC_MDCFG_0_DDR, SDRC_MCFG_0); + + /* set timing */ + __raw_writel(SDP_SDRC_ACTIM_CTRLA_0, SDRC_ACTIM_CTRLA_0); + __raw_writel(SDP_SDRC_ACTIM_CTRLB_0, SDRC_ACTIM_CTRLB_0); + __raw_writel(SDP_SDRC_RFR_CTRL, SDRC_RFR_CTRL); + + /* init sequence for mDDR/mSDR using manual commands (DDR is different) */ + __raw_writel(CMD_NOP, SDRC_MANUAL_0); + delay(5000); + __raw_writel(CMD_PRECHARGE, SDRC_MANUAL_0); + __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_0); + __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_0); + + /* set mr0 */ + __raw_writel(SDP_SDRC_MR_0_DDR, SDRC_MR_0); + + /* set up dll */ + __raw_writel(SDP_SDRC_DLLAB_CTRL, SDRC_DLLA_CTRL); + delay(0x2000); /* give time to lock */ + +} +#endif // CFG_3430SDRAM_DDR + +/************************************************************* + * get_sys_clk_speed - determine reference oscillator speed + * based on known 32kHz clock and gptimer. + *************************************************************/ +u32 get_osc_clk_speed(void) +{ + u32 start, cstart, cend, cdiff, val; + + val = __raw_readl(PRM_CLKSRC_CTRL); + /* If SYS_CLK is being divided by 2, remove for now */ + val = (val & (~BIT7)) | BIT6; + __raw_writel(val, PRM_CLKSRC_CTRL); + + /* enable timer2 */ + val = __raw_readl(CM_CLKSEL_WKUP) | BIT0; + __raw_writel(val, CM_CLKSEL_WKUP); /* select sys_clk for GPT1 */ + + /* Enable I and F Clocks for GPT1 */ + val = __raw_readl(CM_ICLKEN_WKUP) | BIT0 | BIT2; + __raw_writel(val, CM_ICLKEN_WKUP); + val = __raw_readl(CM_FCLKEN_WKUP) | BIT0; + __raw_writel(val, CM_FCLKEN_WKUP); + + __raw_writel(0, OMAP34XX_GPT1 + TLDR); /* start counting at 0 */ + __raw_writel(GPT_EN, OMAP34XX_GPT1 + TCLR); /* enable clock */ + /* enable 32kHz source *//* enabled out of reset */ + /* determine sys_clk via gauging */ + + start = 20 + __raw_readl(S32K_CR); /* start time in 20 cycles */ + while (__raw_readl(S32K_CR) < start); /* dead loop till start time */ + cstart = __raw_readl(OMAP34XX_GPT1 + TCRR); /* get start sys_clk count */ + while (__raw_readl(S32K_CR) < (start + 20)); /* wait for 40 cycles */ + cend = __raw_readl(OMAP34XX_GPT1 + TCRR); /* get end sys_clk count */ + cdiff = cend - cstart; /* get elapsed ticks */ + + /* based on number of ticks assign speed */ + if (cdiff > 19000) + return (S38_4M); + else if (cdiff > 15200) + return (S26M); + else if (cdiff > 13000) + return (S24M); + else if (cdiff > 9000) + return (S19_2M); + else if (cdiff > 7600) + return (S13M); + else + return (S12M); +} + +/****************************************************************************** + * get_sys_clkin_sel() - returns the sys_clkin_sel field value based on + * -- input oscillator clock frequency. + * + *****************************************************************************/ +void get_sys_clkin_sel(u32 osc_clk, u32 *sys_clkin_sel) +{ + if(osc_clk == S38_4M) + *sys_clkin_sel= 4; + else if(osc_clk == S26M) + *sys_clkin_sel = 3; + else if(osc_clk == S19_2M) + *sys_clkin_sel = 2; + else if(osc_clk == S13M) + *sys_clkin_sel = 1; + else if(osc_clk == S12M) + *sys_clkin_sel = 0; +} + +/****************************************************************************** + * prcm_init() - inits clocks for PRCM as defined in clocks.h + * -- called from SRAM, or Flash (using temp SRAM stack). + *****************************************************************************/ +void prcm_init(void) +{ + u32 osc_clk=0, sys_clkin_sel; + dpll_param *dpll_param_p; + u32 clk_index, sil_index; + + /* Gauge the input clock speed and find out the sys_clkin_sel + * value corresponding to the input clock. + */ + osc_clk = get_osc_clk_speed(); + get_sys_clkin_sel(osc_clk, &sys_clkin_sel); + + sr32(PRM_CLKSEL, 0, 3, sys_clkin_sel); /* set input crystal speed */ + + /* If the input clock is greater than 19.2M always divide/2 */ + if(sys_clkin_sel > 2) { + sr32(PRM_CLKSRC_CTRL, 6, 2, 2);/* input clock divider */ + clk_index = sys_clkin_sel/2; + } else { + sr32(PRM_CLKSRC_CTRL, 6, 2, 1);/* input clock divider */ + clk_index = sys_clkin_sel; + } + + /* The DPLL tables are defined according to sysclk value and + * silicon revision. The clk_index value will be used to get + * the values for that input sysclk from the DPLL param table + * and sil_index will get the values for that SysClk for the + * appropriate silicon rev. + */ + if(cpu_is_3410()) + sil_index = 2; + else { + if(get_cpu_rev() == CPU_3430_ES1) + sil_index = 0; + else if(get_cpu_rev() == CPU_3430_ES2) + sil_index = 1; + } + + /* Unlock MPU DPLL (slows things down, and needed later) */ + sr32(CM_CLKEN_PLL_MPU, 0, 3, PLL_LOW_POWER_BYPASS); + wait_on_value(BIT0, 0, CM_IDLEST_PLL_MPU, LDELAY); + + /* Getting the base address of Core DPLL param table*/ + dpll_param_p = (dpll_param *)get_core_dpll_param(); + /* Moving it to the right sysclk and ES rev base */ + dpll_param_p = dpll_param_p + MAX_SIL_INDEX*clk_index + sil_index; + /* CORE DPLL */ + /* sr32(CM_CLKSEL2_EMU) set override to work when asleep */ + sr32(CM_CLKEN_PLL, 0, 3, PLL_FAST_RELOCK_BYPASS); + wait_on_value(BIT0, 0, CM_IDLEST_CKGEN, LDELAY); + sr32(CM_CLKSEL1_EMU, 16, 5, CORE_M3X2); /* m3x2 */ + sr32(CM_CLKSEL1_PLL, 27, 2, dpll_param_p->m2); /* Set M2 */ + sr32(CM_CLKSEL1_PLL, 16, 11, dpll_param_p->m); /* Set M */ + sr32(CM_CLKSEL1_PLL, 8, 7, dpll_param_p->n); /* Set N */ + sr32(CM_CLKSEL1_PLL, 6, 1, 0); /* 96M Src */ + sr32(CM_CLKSEL_CORE, 8, 4, CORE_SSI_DIV); /* ssi */ + sr32(CM_CLKSEL_CORE, 4, 2, CORE_FUSB_DIV); /* fsusb */ + sr32(CM_CLKSEL_CORE, 2, 2, CORE_L4_DIV); /* l4 */ + sr32(CM_CLKSEL_CORE, 0, 2, CORE_L3_DIV); /* l3 */ + sr32(CM_CLKSEL_GFX, 0, 3, GFX_DIV); /* gfx */ + sr32(CM_CLKSEL_WKUP, 1, 2, WKUP_RSM); /* reset mgr */ + sr32(CM_CLKEN_PLL, 4, 4, dpll_param_p->fsel); /* FREQSEL */ + sr32(CM_CLKEN_PLL, 0, 3, PLL_LOCK); /* lock mode */ + wait_on_value(BIT0, 1, CM_IDLEST_CKGEN, LDELAY); + + /* Getting the base address to PER DPLL param table*/ + dpll_param_p = (dpll_param *)get_per_dpll_param(); + /* Moving it to the right sysclk base */ + dpll_param_p = dpll_param_p + clk_index; + /* PER DPLL */ + sr32(CM_CLKEN_PLL, 16, 3, PLL_STOP); + wait_on_value(BIT1, 0, CM_IDLEST_CKGEN, LDELAY); + sr32(CM_CLKSEL1_EMU, 24, 5, PER_M6X2); /* set M6 */ + sr32(CM_CLKSEL_CAM, 0, 5, PER_M5X2); /* set M5 */ + sr32(CM_CLKSEL_DSS, 0, 5, PER_M4X2); /* set M4 */ + sr32(CM_CLKSEL_DSS, 8, 5, PER_M3X2); /* set M3 */ + sr32(CM_CLKSEL3_PLL, 0, 5, dpll_param_p->m2); /* set M2 */ + sr32(CM_CLKSEL2_PLL, 8, 11, dpll_param_p->m); /* set m */ + sr32(CM_CLKSEL2_PLL, 0, 7, dpll_param_p->n); /* set n */ + sr32(CM_CLKEN_PLL, 20, 4, dpll_param_p->fsel);/* FREQSEL */ + sr32(CM_CLKEN_PLL, 16, 3, PLL_LOCK); /* lock mode */ + wait_on_value(BIT1, 2, CM_IDLEST_CKGEN, LDELAY); + + /* Getting the base address to MPU DPLL param table*/ + dpll_param_p = (dpll_param *)get_mpu_dpll_param(); + /* Moving it to the right sysclk and ES rev base */ + dpll_param_p = dpll_param_p + MAX_SIL_INDEX*clk_index + sil_index; + /* MPU DPLL (unlocked already) */ + sr32(CM_CLKSEL2_PLL_MPU, 0, 5, dpll_param_p->m2); /* Set M2 */ + sr32(CM_CLKSEL1_PLL_MPU, 8, 11, dpll_param_p->m); /* Set M */ + sr32(CM_CLKSEL1_PLL_MPU, 0, 7, dpll_param_p->n); /* Set N */ + sr32(CM_CLKEN_PLL_MPU, 4, 4, dpll_param_p->fsel); /* FREQSEL */ + sr32(CM_CLKEN_PLL_MPU, 0, 3, PLL_LOCK); /* lock mode */ + wait_on_value(BIT0, 1, CM_IDLEST_PLL_MPU, LDELAY); + + /* Getting the base address to IVA DPLL param table*/ + dpll_param_p = (dpll_param *)get_iva_dpll_param(); + /* Moving it to the right sysclk and ES rev base */ + dpll_param_p = dpll_param_p + MAX_SIL_INDEX*clk_index + sil_index; + /* IVA DPLL (set to 12*20=240MHz) */ + sr32(CM_CLKEN_PLL_IVA2, 0, 3, PLL_STOP); + wait_on_value(BIT0, 0, CM_IDLEST_PLL_IVA2, LDELAY); + sr32(CM_CLKSEL2_PLL_IVA2, 0, 5, dpll_param_p->m2); /* set M2 */ + sr32(CM_CLKSEL1_PLL_IVA2, 8, 11, dpll_param_p->m); /* set M */ + sr32(CM_CLKSEL1_PLL_IVA2, 0, 7, dpll_param_p->n); /* set N */ + sr32(CM_CLKEN_PLL_IVA2, 4, 4, dpll_param_p->fsel); /* FREQSEL */ + sr32(CM_CLKEN_PLL_IVA2, 0, 3, PLL_LOCK); /* lock mode */ + wait_on_value(BIT0, 1, CM_IDLEST_PLL_IVA2, LDELAY); + + /* Set up GPTimers to sys_clk source only */ + sr32(CM_CLKSEL_PER, 0, 8, 0xff); + sr32(CM_CLKSEL_WKUP, 0, 1, 1); + + delay(5000); +} + +/***************************************** + * Routine: secure_unlock + * Description: Setup security registers for access + * (GP Device only) + *****************************************/ +void secure_unlock(void) +{ + /* Permission values for registers -Full fledged permissions to all */ + #define UNLOCK_1 0xFFFFFFFF + #define UNLOCK_2 0x00000000 + #define UNLOCK_3 0x0000FFFF + /* Protection Module Register Target APE (PM_RT)*/ + __raw_writel(UNLOCK_1, RT_REQ_INFO_PERMISSION_1); + __raw_writel(UNLOCK_1, RT_READ_PERMISSION_0); + __raw_writel(UNLOCK_1, RT_WRITE_PERMISSION_0); + __raw_writel(UNLOCK_2, RT_ADDR_MATCH_1); + + __raw_writel(UNLOCK_3, GPMC_REQ_INFO_PERMISSION_0); + __raw_writel(UNLOCK_3, GPMC_READ_PERMISSION_0); + __raw_writel(UNLOCK_3, GPMC_WRITE_PERMISSION_0); + + __raw_writel(UNLOCK_3, OCM_REQ_INFO_PERMISSION_0); + __raw_writel(UNLOCK_3, OCM_READ_PERMISSION_0); + __raw_writel(UNLOCK_3, OCM_WRITE_PERMISSION_0); + __raw_writel(UNLOCK_2, OCM_ADDR_MATCH_2); + + /* IVA Changes */ + __raw_writel(UNLOCK_3, IVA2_REQ_INFO_PERMISSION_0); + __raw_writel(UNLOCK_3, IVA2_READ_PERMISSION_0); + __raw_writel(UNLOCK_3, IVA2_WRITE_PERMISSION_0); + + __raw_writel(UNLOCK_1, SMS_RG_ATT0); /* SDRC region 0 public */ +} + +/********************************************************** + * Routine: try_unlock_sram() + * Description: If chip is GP type, unlock the SRAM for + * general use. + ***********************************************************/ +void try_unlock_memory(void) +{ + int mode; + + /* if GP device unlock device SRAM for general use */ + /* secure code breaks for Secure/Emulation device - HS/E/T*/ + mode = get_device_type(); + if (mode == GP_DEVICE) { + secure_unlock(); + } + return; +} + +/********************************************************** + * Routine: s_init + * Description: Does early system init of muxing and clocks. + * - Called at time when only stack is available. + **********************************************************/ + +void s_init(void) +{ + watchdog_init(); +#ifdef CONFIG_3430_AS_3410 + /* setup the scalability control register for + * 3430 to work in 3410 mode + */ + __raw_writel(0x5ABF,CONTROL_SCALABLE_OMAP_OCP); +#endif + try_unlock_memory(); + set_muxconf_regs(); + delay(100); + prcm_init(); + per_clocks_enable(); + config_3430sdram_ddr(); +} + +/******************************************************* + * Routine: misc_init_r + * Description: Init ethernet (done here so udelay works) + ********************************************************/ +int misc_init_r (void) +{ + return(0); +} + +/****************************************************** + * Routine: wait_for_command_complete + * Description: Wait for posting to finish on watchdog + ******************************************************/ +void wait_for_command_complete(unsigned int wd_base) +{ + int pending = 1; + do { + pending = __raw_readl(wd_base + WWPS); + } while (pending); +} + +/**************************************** + * Routine: watchdog_init + * Description: Shut down watch dogs + *****************************************/ +void watchdog_init(void) +{ + /* There are 3 watch dogs WD1=Secure, WD2=MPU, WD3=IVA. WD1 is + * either taken care of by ROM (HS/EMU) or not accessible (GP). + * We need to take care of WD2-MPU or take a PRCM reset. WD3 + * should not be running and does not generate a PRCM reset. + */ + sr32(CM_FCLKEN_WKUP, 5, 1, 1); + sr32(CM_ICLKEN_WKUP, 5, 1, 1); + wait_on_value(BIT5, 0x20, CM_IDLEST_WKUP, 5); /* some issue here */ + + __raw_writel(WD_UNLOCK1, WD2_BASE + WSPR); + wait_for_command_complete(WD2_BASE); + __raw_writel(WD_UNLOCK2, WD2_BASE + WSPR); +} + +/********************************************** + * Routine: dram_init + * Description: sets uboots idea of sdram size + **********************************************/ +int dram_init (void) +{ + return 0; +} + +/***************************************************************** + * Routine: peripheral_enable + * Description: Enable the clks & power for perifs (GPT2, UART1,...) + ******************************************************************/ +void per_clocks_enable(void) +{ + /* Enable GP2 timer. */ + sr32(CM_CLKSEL_PER, 0, 1, 0x1); /* GPT2 = sys clk */ + sr32(CM_ICLKEN_PER, 3, 1, 0x1); /* ICKen GPT2 */ + sr32(CM_FCLKEN_PER, 3, 1, 0x1); /* FCKen GPT2 */ + +#ifdef CFG_NS16550 + /* Enable UART1 clocks */ + sr32(CM_FCLKEN1_CORE, 13, 1, 0x1); + sr32(CM_ICLKEN1_CORE, 13, 1, 0x1); +#endif + delay(1000); +} + +/* Set MUX for UART, GPMC, SDRC, GPIO */ + +#define MUX_VAL(OFFSET,VALUE)\ + __raw_writew((VALUE), OMAP34XX_CTRL_BASE + (OFFSET)); + +#define CP(x) (CONTROL_PADCONF_##x) +/* + * IEN - Input Enable + * IDIS - Input Disable + * PTD - Pull type Down + * PTU - Pull type Up + * DIS - Pull type selection is inactive + * EN - Pull type selection is active + * M0 - Mode 0 + * The commented string gives the final mux configuration for that pin + */ +#define MUX_DEFAULT()\ + MUX_VAL(CP(SDRC_D0), (IEN | PTD | DIS | M0)) /*SDRC_D0*/\ + MUX_VAL(CP(SDRC_D1), (IEN | PTD | DIS | M0)) /*SDRC_D1*/\ + MUX_VAL(CP(SDRC_D2), (IEN | PTD | DIS | M0)) /*SDRC_D2*/\ + MUX_VAL(CP(SDRC_D3), (IEN | PTD | DIS | M0)) /*SDRC_D3*/\ + MUX_VAL(CP(SDRC_D4), (IEN | PTD | DIS | M0)) /*SDRC_D4*/\ + MUX_VAL(CP(SDRC_D5), (IEN | PTD | DIS | M0)) /*SDRC_D5*/\ + MUX_VAL(CP(SDRC_D6), (IEN | PTD | DIS | M0)) /*SDRC_D6*/\ + MUX_VAL(CP(SDRC_D7), (IEN | PTD | DIS | M0)) /*SDRC_D7*/\ + MUX_VAL(CP(SDRC_D8), (IEN | PTD | DIS | M0)) /*SDRC_D8*/\ + MUX_VAL(CP(SDRC_D9), (IEN | PTD | DIS | M0)) /*SDRC_D9*/\ + MUX_VAL(CP(SDRC_D10), (IEN | PTD | DIS | M0)) /*SDRC_D10*/\ + MUX_VAL(CP(SDRC_D11), (IEN | PTD | DIS | M0)) /*SDRC_D11*/\ + MUX_VAL(CP(SDRC_D12), (IEN | PTD | DIS | M0)) /*SDRC_D12*/\ + MUX_VAL(CP(SDRC_D13), (IEN | PTD | DIS | M0)) /*SDRC_D13*/\ + MUX_VAL(CP(SDRC_D14), (IEN | PTD | DIS | M0)) /*SDRC_D14*/\ + MUX_VAL(CP(SDRC_D15), (IEN | PTD | DIS | M0)) /*SDRC_D15*/\ + MUX_VAL(CP(SDRC_D16), (IEN | PTD | DIS | M0)) /*SDRC_D16*/\ + MUX_VAL(CP(SDRC_D17), (IEN | PTD | DIS | M0)) /*SDRC_D17*/\ + MUX_VAL(CP(SDRC_D18), (IEN | PTD | DIS | M0)) /*SDRC_D18*/\ + MUX_VAL(CP(SDRC_D19), (IEN | PTD | DIS | M0)) /*SDRC_D19*/\ + MUX_VAL(CP(SDRC_D20), (IEN | PTD | DIS | M0)) /*SDRC_D20*/\ + MUX_VAL(CP(SDRC_D21), (IEN | PTD | DIS | M0)) /*SDRC_D21*/\ + MUX_VAL(CP(SDRC_D22), (IEN | PTD | DIS | M0)) /*SDRC_D22*/\ + MUX_VAL(CP(SDRC_D23), (IEN | PTD | DIS | M0)) /*SDRC_D23*/\ + MUX_VAL(CP(SDRC_D24), (IEN | PTD | DIS | M0)) /*SDRC_D24*/\ + MUX_VAL(CP(SDRC_D25), (IEN | PTD | DIS | M0)) /*SDRC_D25*/\ + MUX_VAL(CP(SDRC_D26), (IEN | PTD | DIS | M0)) /*SDRC_D26*/\ + MUX_VAL(CP(SDRC_D27), (IEN | PTD | DIS | M0)) /*SDRC_D27*/\ + MUX_VAL(CP(SDRC_D28), (IEN | PTD | DIS | M0)) /*SDRC_D28*/\ + MUX_VAL(CP(SDRC_D29), (IEN | PTD | DIS | M0)) /*SDRC_D29*/\ + MUX_VAL(CP(SDRC_D30), (IEN | PTD | DIS | M0)) /*SDRC_D30*/\ + MUX_VAL(CP(SDRC_D31), (IEN | PTD | DIS | M0)) /*SDRC_D31*/\ + MUX_VAL(CP(SDRC_CLK), (IEN | PTD | DIS | M0)) /*SDRC_CLK*/\ + MUX_VAL(CP(SDRC_DQS0), (IEN | PTD | DIS | M0)) /*SDRC_DQS0*/\ + MUX_VAL(CP(SDRC_DQS1), (IEN | PTD | DIS | M0)) /*SDRC_DQS1*/\ + MUX_VAL(CP(SDRC_DQS2), (IEN | PTD | DIS | M0)) /*SDRC_DQS2*/\ + MUX_VAL(CP(SDRC_DQS3), (IEN | PTD | DIS | M0)) /*SDRC_DQS3*/\ + MUX_VAL(CP(GPMC_A1), (IDIS | PTD | DIS | M0)) /*GPMC_A1*/\ + MUX_VAL(CP(GPMC_A2), (IDIS | PTD | DIS | M0)) /*GPMC_A2*/\ + MUX_VAL(CP(GPMC_A3), (IDIS | PTD | DIS | M0)) /*GPMC_A3*/\ + MUX_VAL(CP(GPMC_A4), (IDIS | PTD | DIS | M0)) /*GPMC_A4*/\ + MUX_VAL(CP(GPMC_A5), (IDIS | PTD | DIS | M0)) /*GPMC_A5*/\ + MUX_VAL(CP(GPMC_A6), (IDIS | PTD | DIS | M0)) /*GPMC_A6*/\ + MUX_VAL(CP(GPMC_A7), (IDIS | PTD | DIS | M0)) /*GPMC_A7*/\ + MUX_VAL(CP(GPMC_A8), (IDIS | PTD | DIS | M0)) /*GPMC_A8*/\ + MUX_VAL(CP(GPMC_A9), (IDIS | PTD | DIS | M0)) /*GPMC_A9*/\ + MUX_VAL(CP(GPMC_A10), (IDIS | PTD | DIS | M0)) /*GPMC_A10*/\ + MUX_VAL(CP(GPMC_D0), (IEN | PTD | DIS | M0)) /*GPMC_D0*/\ + MUX_VAL(CP(GPMC_D1), (IEN | PTD | DIS | M0)) /*GPMC_D1*/\ + MUX_VAL(CP(GPMC_D2), (IEN | PTD | DIS | M0)) /*GPMC_D2*/\ + MUX_VAL(CP(GPMC_D3), (IEN | PTD | DIS | M0)) /*GPMC_D3*/\ + MUX_VAL(CP(GPMC_D4), (IEN | PTD | DIS | M0)) /*GPMC_D4*/\ + MUX_VAL(CP(GPMC_D5), (IEN | PTD | DIS | M0)) /*GPMC_D5*/\ + MUX_VAL(CP(GPMC_D6), (IEN | PTD | DIS | M0)) /*GPMC_D6*/\ + MUX_VAL(CP(GPMC_D7), (IEN | PTD | DIS | M0)) /*GPMC_D7*/\ + MUX_VAL(CP(GPMC_D8), (IEN | PTD | DIS | M0)) /*GPMC_D8*/\ + MUX_VAL(CP(GPMC_D9), (IEN | PTD | DIS | M0)) /*GPMC_D9*/\ + MUX_VAL(CP(GPMC_D10), (IEN | PTD | DIS | M0)) /*GPMC_D10*/\ + MUX_VAL(CP(GPMC_D11), (IEN | PTD | DIS | M0)) /*GPMC_D11*/\ + MUX_VAL(CP(GPMC_D12), (IEN | PTD | DIS | M0)) /*GPMC_D12*/\ + MUX_VAL(CP(GPMC_D13), (IEN | PTD | DIS | M0)) /*GPMC_D13*/\ + MUX_VAL(CP(GPMC_D14), (IEN | PTD | DIS | M0)) /*GPMC_D14*/\ + MUX_VAL(CP(GPMC_D15), (IEN | PTD | DIS | M0)) /*GPMC_D15*/\ + MUX_VAL(CP(GPMC_nCS0), (IDIS | PTU | EN | M0)) /*GPMC_nCS0*/\ + MUX_VAL(CP(GPMC_nCS1), (IDIS | PTU | EN | M0)) /*GPMC_nCS1*/\ + MUX_VAL(CP(GPMC_nCS2), (IDIS | PTU | EN | M0)) /*GPMC_nCS2*/\ + MUX_VAL(CP(GPMC_nCS3), (IDIS | PTU | EN | M0)) /*GPMC_nCS3*/\ + MUX_VAL(CP(GPMC_nCS4), (IDIS | PTU | EN | M0)) /*GPMC_nCS4*/\ + MUX_VAL(CP(GPMC_nCS5), (IDIS | PTU | EN | M0)) /*GPMC_nCS5*/\ + MUX_VAL(CP(GPMC_nCS6), (IDIS | PTU | EN | M0)) /*GPMC_nCS6*/\ + MUX_VAL(CP(GPMC_nCS7), (IDIS | PTU | EN | M0)) /*GPMC_nCS7*/\ + MUX_VAL(CP(GPMC_CLK), (IDIS | PTD | DIS | M0)) /*GPMC_CLK*/\ + MUX_VAL(CP(GPMC_nADV_ALE), (IDIS | PTD | DIS | M0)) /*GPMC_nADV_ALE*/\ + MUX_VAL(CP(GPMC_nOE), (IDIS | PTD | DIS | M0)) /*GPMC_nOE*/\ + MUX_VAL(CP(GPMC_nWE), (IDIS | PTD | DIS | M0)) /*GPMC_nWE*/\ + MUX_VAL(CP(GPMC_nBE0_CLE), (IDIS | PTD | DIS | M0)) /*GPMC_nBE0_CLE*/\ + MUX_VAL(CP(GPMC_nBE1), (IDIS | PTD | DIS | M4)) /*GPIO_61*/\ + MUX_VAL(CP(GPMC_nWP), (IEN | PTD | DIS | M0)) /*GPMC_nWP*/\ + MUX_VAL(CP(GPMC_WAIT0), (IEN | PTU | EN | M0)) /*GPMC_WAIT0*/\ + MUX_VAL(CP(GPMC_WAIT1), (IEN | PTU | EN | M0)) /*GPMC_WAIT1*/\ + MUX_VAL(CP(GPMC_WAIT2), (IEN | PTU | EN | M4)) /*GPIO_64*/\ + MUX_VAL(CP(GPMC_WAIT3), (IEN | PTU | EN | M4)) /*GPIO_65*/\ + MUX_VAL(CP(DSS_DATA18), (IEN | PTD | DIS | M4)) /*GPIO_88*/\ + MUX_VAL(CP(DSS_DATA19), (IEN | PTD | DIS | M4)) /*GPIO_89*/\ + MUX_VAL(CP(DSS_DATA20), (IEN | PTD | DIS | M4)) /*GPIO_90*/\ + MUX_VAL(CP(DSS_DATA21), (IEN | PTD | DIS | M4)) /*GPIO_91*/\ + MUX_VAL(CP(CAM_WEN), (IEN | PTD | DIS | M4)) /*GPIO_167*/\ + MUX_VAL(CP(UART1_TX), (IDIS | PTD | DIS | M0)) /*UART1_TX*/\ + MUX_VAL(CP(UART1_RTS), (IDIS | PTD | DIS | M0)) /*UART1_RTS*/\ + MUX_VAL(CP(UART1_CTS), (IEN | PTU | DIS | M0)) /*UART1_CTS*/\ + MUX_VAL(CP(UART1_RX), (IEN | PTD | DIS | M0)) /*UART1_RX*/\ + MUX_VAL(CP(McBSP1_DX), (IEN | PTD | DIS | M4)) /*GPIO_158*/\ + MUX_VAL(CP(SYS_32K), (IEN | PTD | DIS | M0)) /*SYS_32K*/\ + MUX_VAL(CP(SYS_BOOT0), (IEN | PTD | DIS | M4)) /*GPIO_2 */\ + MUX_VAL(CP(SYS_BOOT1), (IEN | PTD | DIS | M4)) /*GPIO_3 */\ + MUX_VAL(CP(SYS_BOOT2), (IEN | PTD | DIS | M4)) /*GPIO_4 */\ + MUX_VAL(CP(SYS_BOOT3), (IEN | PTD | DIS | M4)) /*GPIO_5 */\ + MUX_VAL(CP(SYS_BOOT4), (IEN | PTD | DIS | M4)) /*GPIO_6 */\ + MUX_VAL(CP(SYS_BOOT5), (IEN | PTD | DIS | M4)) /*GPIO_7 */\ + MUX_VAL(CP(SYS_BOOT6), (IEN | PTD | DIS | M4)) /*GPIO_8 */\ + MUX_VAL(CP(SYS_CLKOUT2), (IEN | PTU | EN | M4)) /*GPIO_186*/\ + MUX_VAL(CP(JTAG_nTRST), (IEN | PTD | DIS | M0)) /*JTAG_nTRST*/\ + MUX_VAL(CP(JTAG_TCK), (IEN | PTD | DIS | M0)) /*JTAG_TCK*/\ + MUX_VAL(CP(JTAG_TMS), (IEN | PTD | DIS | M0)) /*JTAG_TMS*/\ + MUX_VAL(CP(JTAG_TDI), (IEN | PTD | DIS | M0)) /*JTAG_TDI*/\ + MUX_VAL(CP(JTAG_EMU0), (IEN | PTD | DIS | M0)) /*JTAG_EMU0*/\ + MUX_VAL(CP(JTAG_EMU1), (IEN | PTD | DIS | M0)) /*JTAG_EMU1*/\ + MUX_VAL(CP(ETK_CLK), (IEN | PTD | DIS | M4)) /*GPIO_12*/\ + MUX_VAL(CP(ETK_CTL), (IEN | PTD | DIS | M4)) /*GPIO_13*/\ + MUX_VAL(CP(ETK_D0 ), (IEN | PTD | DIS | M4)) /*GPIO_14*/\ + MUX_VAL(CP(ETK_D1 ), (IEN | PTD | DIS | M4)) /*GPIO_15*/\ + MUX_VAL(CP(ETK_D2 ), (IEN | PTD | DIS | M4)) /*GPIO_16*/\ + MUX_VAL(CP(ETK_D10), (IEN | PTD | DIS | M4)) /*GPIO_24*/\ + MUX_VAL(CP(ETK_D11), (IEN | PTD | DIS | M4)) /*GPIO_25*/\ + MUX_VAL(CP(ETK_D12), (IEN | PTD | DIS | M4)) /*GPIO_26*/\ + MUX_VAL(CP(ETK_D13), (IEN | PTD | DIS | M4)) /*GPIO_27*/\ + MUX_VAL(CP(ETK_D14), (IEN | PTD | DIS | M4)) /*GPIO_28*/\ + MUX_VAL(CP(ETK_D15), (IEN | PTD | DIS | M4)) /*GPIO_29*/ + +/********************************************************** + * Routine: set_muxconf_regs + * Description: Setting up the configuration Mux registers + * specific to the hardware. Many pins need + * to be moved from protect to primary mode. + *********************************************************/ +void set_muxconf_regs(void) +{ + MUX_DEFAULT(); +} + +/********************************************************** + * Routine: nand+_init + * Description: Set up nand for nand and jffs2 commands + *********************************************************/ +int nand_init(void) +{ + /* global settings */ + __raw_writel(0x10, GPMC_SYSCONFIG); /* smart idle */ + __raw_writel(0x0, GPMC_IRQENABLE); /* isr's sources masked */ + __raw_writel(0, GPMC_TIMEOUT_CONTROL);/* timeout disable */ +#ifdef CFG_NAND + __raw_writel(0x001, GPMC_CONFIG); /* set nWP, disable limited addr */ +#endif + + /* Set the GPMC Vals . For NAND boot on 3430SDP, NAND is mapped at CS0 + * , NOR at CS1 and MPDB at CS3. And oneNAND boot, we map oneNAND at CS0. + * We configure only GPMC CS0 with required values. Configiring other devices + * at other CS in done in u-boot anyway. So we don't have to bother doing it here. + */ + __raw_writel(0 , GPMC_CONFIG7 + GPMC_CONFIG_CS0); + delay(1000); + +#ifdef CFG_NAND + __raw_writel( SMNAND_GPMC_CONFIG1, GPMC_CONFIG1 + GPMC_CONFIG_CS0); + __raw_writel( SMNAND_GPMC_CONFIG2, GPMC_CONFIG2 + GPMC_CONFIG_CS0); + __raw_writel( SMNAND_GPMC_CONFIG3, GPMC_CONFIG3 + GPMC_CONFIG_CS0); + __raw_writel( SMNAND_GPMC_CONFIG4, GPMC_CONFIG4 + GPMC_CONFIG_CS0); + __raw_writel( SMNAND_GPMC_CONFIG5, GPMC_CONFIG5 + GPMC_CONFIG_CS0); + __raw_writel( SMNAND_GPMC_CONFIG6, GPMC_CONFIG6 + GPMC_CONFIG_CS0); + +#else /* CFG_ONENAND */ + __raw_writel( ONENAND_GPMC_CONFIG1, GPMC_CONFIG1 + GPMC_CONFIG_CS0); + __raw_writel( ONENAND_GPMC_CONFIG2, GPMC_CONFIG2 + GPMC_CONFIG_CS0); + __raw_writel( ONENAND_GPMC_CONFIG3, GPMC_CONFIG3 + GPMC_CONFIG_CS0); + __raw_writel( ONENAND_GPMC_CONFIG4, GPMC_CONFIG4 + GPMC_CONFIG_CS0); + __raw_writel( ONENAND_GPMC_CONFIG5, GPMC_CONFIG5 + GPMC_CONFIG_CS0); + __raw_writel( ONENAND_GPMC_CONFIG6, GPMC_CONFIG6 + GPMC_CONFIG_CS0); +#endif + + /* Enable the GPMC Mapping */ + __raw_writel(( ((OMAP34XX_GPMC_CS0_SIZE & 0xF)<<8) | + ((OMAP34XX_GPMC_CS0_MAP>>24) & 0x3F) | + (1<<6) ), (GPMC_CONFIG7 + GPMC_CONFIG_CS0)); + delay(2000); +#if defined(CFG_NAND) + if (nand_chip()){ +#ifdef CFG_PRINTF + printf("Unsupported Chip!\n"); +#endif + return 1; + } +#elif defined(CFG_ONENAND) + if (onenand_chip()){ +#ifdef CFG_PRINTF + printf("OneNAND Unsupported !\n"); +#endif + return 1; + } +#endif + return 0; +} + +#ifdef CFG_CMD_FAT +typedef int (mmc_boot_addr) (void); +int mmc_boot(void) +{ + long size, i; + unsigned long offset = CFG_LOADADDR; + unsigned long count; + char buf[12]; + block_dev_desc_t *dev_desc = NULL; + int dev = 0; + int part = 1; + char *ep; + unsigned char ret = 0; + + printf("Starting X-loader on MMC \n"); + + ret = mmc_init(1); + if(ret == 0){ + printf("\n MMC init failed \n"); + return 0; + } + + dev_desc = mmc_get_dev(0); + fat_register_device(dev_desc, 1); + size = file_fat_read("u-boot.bin", (unsigned char *)offset, 0); + if (size == -1) { + return 0; + } + printf("\n%ld Bytes Read from MMC \n", size); + + printf("Starting OS Bootloader from MMC...\n"); + + ((mmc_boot_addr *) CFG_LOADADDR) (); + + return 0; +} +#endif + +/* optionally do something like blinking LED */ +void board_hang (void) +{ while (0) {};} diff --git a/x-loader/board/omap3430sdp/platform.S b/x-loader/board/omap3430sdp/platform.S new file mode 100644 index 0000000..5869270 --- /dev/null +++ b/x-loader/board/omap3430sdp/platform.S @@ -0,0 +1,360 @@ +/* + * Board specific setup info + * + * (C) Copyright 2004-2006 + * Texas Instruments, <www.ti.com> + * Richard Woodruff <r-woodruff2@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <asm/arch/cpu.h> +#include <asm/arch/mem.h> +#include <asm/arch/clocks.h> + +_TEXT_BASE: + .word TEXT_BASE /* sdram load addr from config.mk */ + +#if !defined(CFG_NAND_BOOT) && !defined(CFG_NAND_BOOT) +/************************************************************************** + * cpy_clk_code: relocates clock code into SRAM where its safer to execute + * R1 = SRAM destination address. + *************************************************************************/ +.global cpy_clk_code + cpy_clk_code: + /* Copy DPLL code into SRAM */ + adr r0, go_to_speed /* get addr of clock setting code */ + mov r2, #384 /* r2 size to copy (div by 32 bytes) */ + mov r1, r1 /* r1 <- dest address (passed in) */ + add r2, r2, r0 /* r2 <- source end address */ +next2: + ldmia r0!, {r3-r10} /* copy from source address [r0] */ + stmia r1!, {r3-r10} /* copy to target address [r1] */ + cmp r0, r2 /* until source end address [r2] */ + bne next2 + mov pc, lr /* back to caller */ + +/* **************************************************************************** + * NOTE: 3430 X-loader currently does not use this code. +* It could be removed its is kept for compatabily with u-boot. + * + * go_to_speed: -Moves to bypass, -Commits clock dividers, -puts dpll at speed + * -executed from SRAM. + * R0 = CM_CLKEN_PLL-bypass value + * R1 = CM_CLKSEL1_PLL-m, n, and divider values + * R2 = CM_CLKSEL_CORE-divider values + * R3 = CM_IDLEST_CKGEN - addr dpll lock wait + * + * Note: If core unlocks/relocks and SDRAM is running fast already it gets + * confused. A reset of the controller gets it back. Taking away its + * L3 when its not in self refresh seems bad for it. Normally, this code + * runs from flash before SDR is init so that should be ok. + ******************************************************************************/ +.global go_to_speed + go_to_speed: + stmfd sp!, {r4-r6} + + /* move into fast relock bypass */ + ldr r4, pll_ctl_add + str r0, [r4] +wait1: + ldr r5, [r3] /* get status */ + and r5, r5, #0x1 /* isolate core status */ + cmp r5, #0x1 /* still locked? */ + beq wait1 /* if lock, loop */ + + /* set new dpll dividers _after_ in bypass */ + ldr r5, pll_div_add1 + str r1, [r5] /* set m, n, m2 */ + ldr r5, pll_div_add2 + str r2, [r5] /* set l3/l4/.. dividers*/ + ldr r5, pll_div_add3 /* wkup */ + ldr r2, pll_div_val3 /* rsm val */ + str r2, [r5] + ldr r5, pll_div_add4 /* gfx */ + ldr r2, pll_div_val4 + str r2, [r5] + ldr r5, pll_div_add5 /* emu */ + ldr r2, pll_div_val5 + str r2, [r5] + + /* now prepare GPMC (flash) for new dpll speed */ + /* flash needs to be stable when we jump back to it */ + ldr r5, flash_cfg3_addr + ldr r2, flash_cfg3_val + str r2, [r5] + ldr r5, flash_cfg4_addr + ldr r2, flash_cfg4_val + str r2, [r5] + ldr r5, flash_cfg5_addr + ldr r2, flash_cfg5_val + str r2, [r5] + ldr r5, flash_cfg1_addr + ldr r2, [r5] + orr r2, r2, #0x3 /* up gpmc divider */ + str r2, [r5] + + /* lock DPLL3 and wait a bit */ + orr r0, r0, #0x7 /* set up for lock mode */ + str r0, [r4] /* lock */ + nop /* ARM slow at this point working at sys_clk */ + nop + nop + nop +wait2: + ldr r5, [r3] /* get status */ + and r5, r5, #0x1 /* isolate core status */ + cmp r5, #0x1 /* still locked? */ + bne wait2 /* if lock, loop */ + nop + nop + nop + nop + ldmfd sp!, {r4-r6} + mov pc, lr /* back to caller, locked */ + +_go_to_speed: .word go_to_speed + +/* these constants need to be close for PIC code */ +/* The Nor has to be in the Flash Base CS0 for this condition to happen */ +flash_cfg1_addr: + .word (GPMC_CONFIG_CS0 + GPMC_CONFIG1) +flash_cfg3_addr: + .word (GPMC_CONFIG_CS0 + GPMC_CONFIG3) +flash_cfg3_val: + .word STNOR_GPMC_CONFIG3 +flash_cfg4_addr: + .word (GPMC_CONFIG_CS0 + GPMC_CONFIG4) +flash_cfg4_val: + .word STNOR_GPMC_CONFIG4 +flash_cfg5_val: + .word STNOR_GPMC_CONFIG5 +flash_cfg5_addr: + .word (GPMC_CONFIG_CS0 + GPMC_CONFIG5) +pll_ctl_add: + .word CM_CLKEN_PLL +pll_div_add1: + .word CM_CLKSEL1_PLL +pll_div_add2: + .word CM_CLKSEL_CORE +pll_div_add3: + .word CM_CLKSEL_WKUP +pll_div_val3: + .word (WKUP_RSM << 1) +pll_div_add4: + .word CM_CLKSEL_GFX +pll_div_val4: + .word (GFX_DIV << 0) +pll_div_add5: + .word CM_CLKSEL1_EMU +pll_div_val5: + .word CLSEL1_EMU_VAL + +#endif + +.globl lowlevel_init +lowlevel_init: + ldr sp, SRAM_STACK + str ip, [sp] /* stash old link register */ + mov ip, lr /* save link reg across call */ + bl s_init /* go setup pll,mux,memory */ + ldr ip, [sp] /* restore save ip */ + mov lr, ip /* restore link reg */ + + /* back to arch calling code */ + mov pc, lr + + /* the literal pools origin */ + .ltorg + +REG_CONTROL_STATUS: + .word CONTROL_STATUS +SRAM_STACK: + .word LOW_LEVEL_SRAM_STACK + +/* DPLL(1-4) PARAM TABLES */ +/* Each of the tables has M, N, FREQSEL, M2 values defined for nominal + * OPP (1.2V). The fields are defined according to dpll_param struct(clock.c). + * The values are defined for all possible sysclk and for ES1 and ES2. + */ + +mpu_dpll_param: +/* 12MHz */ +/* ES1 */ +.word 0x0FE,0x07,0x05,0x01 +/* ES2 */ +.word 0x0FA,0x05,0x07,0x01 +/* 3410 */ +.word 0x085,0x05,0x07,0x01 + +/* 13MHz */ +/* ES1 */ +.word 0x17D,0x0C,0x03,0x01 +/* ES2 */ +.word 0x1F4,0x0C,0x03,0x01 +/* 3410 */ +.word 0x10A,0x0C,0x03,0x01 + +/* 19.2MHz */ +/* ES1 */ +.word 0x179,0x12,0x04,0x01 +/* ES2 */ +.word 0x271,0x17,0x03,0x01 +/* 3410 */ +.word 0x14C,0x17,0x03,0x01 + +/* 26MHz */ +/* ES1 */ +.word 0x17D,0x19,0x03,0x01 +/* ES2 */ +.word 0x0FA,0x0C,0x07,0x01 +/* 3410 */ +.word 0x085,0x0C,0x07,0x01 + +/* 38.4MHz */ +/* ES1 */ +.word 0x1FA,0x32,0x03,0x01 +/* ES2 */ +.word 0x271,0x2F,0x03,0x01 +/* 3410 */ +.word 0x14C,0x2F,0x03,0x01 + + +.globl get_mpu_dpll_param +get_mpu_dpll_param: + adr r0, mpu_dpll_param + mov pc, lr + +iva_dpll_param: +/* 12MHz */ +/* ES1 */ +.word 0x07D,0x05,0x07,0x01 +/* ES2 */ +.word 0x0B4,0x05,0x07,0x01 +/* 3410 */ +.word 0x085,0x05,0x07,0x01 + +/* 13MHz */ +/* ES1 */ +.word 0x0FA,0x0C,0x03,0x01 +/* ES2 */ +.word 0x168,0x0C,0x03,0x01 +/* 3410 */ +.word 0x10A,0x0C,0x03,0x01 + +/* 19.2MHz */ +/* ES1 */ +.word 0x082,0x09,0x07,0x01 +/* ES2 */ +.word 0x0E1,0x0B,0x06,0x01 +/* 3410 */ +.word 0x14C,0x17,0x03,0x01 + +/* 26MHz */ +/* ES1 */ +.word 0x07D,0x0C,0x07,0x01 +/* ES2 */ +.word 0x0B4,0x0C,0x07,0x01 +/* 3410 */ +.word 0x085,0x0C,0x07,0x01 + +/* 38.4MHz */ +/* ES1 */ +.word 0x13F,0x30,0x03,0x01 +/* ES2 */ +.word 0x0E1,0x17,0x06,0x01 +/* 3410 */ +.word 0x14C,0x2F,0x03,0x01 + + +.globl get_iva_dpll_param +get_iva_dpll_param: + adr r0, iva_dpll_param + mov pc, lr + +/* Core DPLL targets for L3 at 166 & L133 */ +core_dpll_param: +/* 12MHz */ +/* ES1 */ +.word M_12_ES1,M_12_ES1,FSL_12_ES1,M2_12_ES1 +/* ES2 */ +.word M_12,N_12,FSEL_12,M2_12 +/* 3410 */ +.word M_12,N_12,FSEL_12,M2_12 + +/* 13MHz */ +/* ES1 */ +.word M_13_ES1,N_13_ES1,FSL_13_ES1,M2_13_ES1 +/* ES2 */ +.word M_13,N_13,FSEL_13,M2_13 +/* 3410 */ +.word M_13,N_13,FSEL_13,M2_13 + +/* 19.2MHz */ +/* ES1 */ +.word M_19p2_ES1,N_19p2_ES1,FSL_19p2_ES1,M2_19p2_ES1 +/* ES2 */ +.word M_19p2,N_19p2,FSEL_19p2,M2_19p2 +/* 3410 */ +.word M_19p2,N_19p2,FSEL_19p2,M2_19p2 + +/* 26MHz */ +/* ES1 */ +.word M_26_ES1,N_26_ES1,FSL_26_ES1,M2_26_ES1 +/* ES2 */ +.word M_26,N_26,FSEL_26,M2_26 +/* 3410 */ +.word M_26,N_26,FSEL_26,M2_26 + +/* 38.4MHz */ +/* ES1 */ +.word M_38p4_ES1,N_38p4_ES1,FSL_38p4_ES1,M2_38p4_ES1 +/* ES2 */ +.word M_38p4,N_38p4,FSEL_38p4,M2_38p4 +/* 3410 */ +.word M_38p4,N_38p4,FSEL_38p4,M2_38p4 + +.globl get_core_dpll_param +get_core_dpll_param: + adr r0, core_dpll_param + mov pc, lr + +/* PER DPLL values are same for both ES1 and ES2 */ +per_dpll_param: +/* 12MHz */ +.word 0xD8,0x05,0x07,0x09 + +/* 13MHz */ +.word 0x1B0,0x0C,0x03,0x09 + +/* 19.2MHz */ +.word 0xE1,0x09,0x07,0x09 + +/* 26MHz */ +.word 0xD8,0x0C,0x07,0x09 + +/* 38.4MHz */ +.word 0xE1,0x13,0x07,0x09 + +.globl get_per_dpll_param +get_per_dpll_param: + adr r0, per_dpll_param + mov pc, lr + diff --git a/x-loader/board/omap3430sdp/x-load.lds b/x-loader/board/omap3430sdp/x-load.lds new file mode 100644 index 0000000..9402f74 --- /dev/null +++ b/x-loader/board/omap3430sdp/x-load.lds @@ -0,0 +1,54 @@ +/* + * November 2006 - Changed to support 3430sdp device + * Copyright (c) 2004-2006 Texas Instruments + * + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, <gj@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + . = 0x00000000; + + . = ALIGN(4); + .text : + { + cpu/omap3/start.o (.text) + *(.text) + } + + . = ALIGN(4); + .rodata : { *(.rodata) } + + . = ALIGN(4); + .data : { *(.data) } + + . = ALIGN(4); + .got : { *(.got) } + + . = ALIGN(4); + __bss_start = .; + .bss : { *(.bss) } + _end = .; +} diff --git a/x-loader/board/omap3530beagle/Makefile b/x-loader/board/omap3530beagle/Makefile new file mode 100644 index 0000000..2dab831 --- /dev/null +++ b/x-loader/board/omap3530beagle/Makefile @@ -0,0 +1,47 @@ +# +# (C) Copyright 2000, 2001, 2002 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = lib$(BOARD).a + +OBJS := omap3530beagle.o +SOBJS := platform.o + +$(LIB): $(OBJS) $(SOBJS) + $(AR) crv $@ $^ + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) + $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ + +-include .depend + +######################################################################### diff --git a/x-loader/board/omap3530beagle/config.mk b/x-loader/board/omap3530beagle/config.mk new file mode 100644 index 0000000..f271b14 --- /dev/null +++ b/x-loader/board/omap3530beagle/config.mk @@ -0,0 +1,20 @@ +# +# (C) Copyright 2006 +# Texas Instruments, <www.ti.com> +# +# Beagle board uses TI OMAP3530 (ARM-CortexA8) cpu +# see http://www.ti.com/ for more information on Texas Instruments +# +# Beagle has 1 bank of 128MB mPOP-SDRAM on CS0 +# Physical Address: +# 8000'0000 (bank0) + +# For use if you want X-Loader to relocate from SRAM to DDR +#TEXT_BASE = 0x80e80000 + +# For XIP in 64K of SRAM or debug (GP device has it all availabe) +# SRAM 40200000-4020FFFF base +# initial stack at 0x4020fffc used in s_init (below xloader). +# The run time stack is (above xloader, 2k below) +# If any globals exist there needs to be room for them also +TEXT_BASE = 0x40200800 diff --git a/x-loader/board/omap3530beagle/omap3530beagle.c b/x-loader/board/omap3530beagle/omap3530beagle.c new file mode 100644 index 0000000..eb8008e --- /dev/null +++ b/x-loader/board/omap3530beagle/omap3530beagle.c @@ -0,0 +1,1012 @@ +/* + * (C) Copyright 2006 + * Texas Instruments, <www.ti.com> + * Jian Zhang <jzhang@ti.com> + * Richard Woodruff <r-woodruff2@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <command.h> +#include <part.h> +#include <fat.h> +#include <asm/arch/cpu.h> +#include <asm/arch/bits.h> +#include <asm/arch/mux.h> +#include <asm/arch/gpio.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/sys_info.h> +#include <asm/arch/clocks.h> +#include <asm/arch/mem.h> + +/* params for XM */ +#define CORE_DPLL_PARAM_M2 0x09 +#define CORE_DPLL_PARAM_M 0x360 +#define CORE_DPLL_PARAM_N 0xC + +/* BeagleBoard revisions */ +#define REVISION_AXBX 0x7 +#define REVISION_CX 0x6 +#define REVISION_C4 0x5 +#define REVISION_XM 0x0 + +/* Used to index into DPLL parameter tables */ +struct dpll_param { + unsigned int m; + unsigned int n; + unsigned int fsel; + unsigned int m2; +}; + +typedef struct dpll_param dpll_param; + +/* Following functions are exported from lowlevel_init.S */ +extern dpll_param *get_mpu_dpll_param(); +extern dpll_param *get_iva_dpll_param(); +extern dpll_param *get_core_dpll_param(); +extern dpll_param *get_per_dpll_param(); + +#define __raw_readl(a) (*(volatile unsigned int *)(a)) +#define __raw_writel(v, a) (*(volatile unsigned int *)(a) = (v)) +#define __raw_readw(a) (*(volatile unsigned short *)(a)) +#define __raw_writew(v, a) (*(volatile unsigned short *)(a) = (v)) + +/******************************************************* + * Routine: delay + * Description: spinning delay to use before udelay works + ******************************************************/ +static inline void delay(unsigned long loops) +{ + __asm__ volatile ("1:\n" "subs %0, %1, #1\n" + "bne 1b":"=r" (loops):"0"(loops)); +} + +void udelay (unsigned long usecs) { + delay(usecs); +} + +/***************************************** + * Routine: board_init + * Description: Early hardware init. + *****************************************/ +int board_init(void) +{ + return 0; +} + +/************************************************************* + * get_device_type(): tell if GP/HS/EMU/TST + *************************************************************/ +u32 get_device_type(void) +{ + int mode; + mode = __raw_readl(CONTROL_STATUS) & (DEVICE_MASK); + return mode >>= 8; +} + +/************************************************ + * get_sysboot_value(void) - return SYS_BOOT[4:0] + ************************************************/ +u32 get_sysboot_value(void) +{ + int mode; + mode = __raw_readl(CONTROL_STATUS) & (SYSBOOT_MASK); + return mode; +} + +/************************************************************* + * Routine: get_mem_type(void) - returns the kind of memory connected + * to GPMC that we are trying to boot form. Uses SYS BOOT settings. + *************************************************************/ +u32 get_mem_type(void) +{ + + if (beagle_revision() == REVISION_XM) + return GPMC_NONE; + + u32 mem_type = get_sysboot_value(); + switch (mem_type) { + case 0: + case 2: + case 4: + case 16: + case 22: + return GPMC_ONENAND; + + case 1: + case 12: + case 15: + case 21: + case 27: + return GPMC_NAND; + + case 3: + case 6: + return MMC_ONENAND; + + case 8: + case 11: + case 14: + case 20: + case 26: + return GPMC_MDOC; + + case 17: + case 18: + case 24: + return MMC_NAND; + + case 7: + case 10: + case 13: + case 19: + case 25: + default: + return GPMC_NOR; + } +} + +/****************************************** + * get_cpu_rev(void) - extract version info + ******************************************/ +u32 get_cpu_rev(void) +{ + u32 cpuid = 0; + /* On ES1.0 the IDCODE register is not exposed on L4 + * so using CPU ID to differentiate + * between ES2.0 and ES1.0. + */ + __asm__ __volatile__("mrc p15, 0, %0, c0, c0, 0":"=r" (cpuid)); + if ((cpuid & 0xf) == 0x0) + return CPU_3430_ES1; + else + return CPU_3430_ES2; + +} + +/****************************************** + * cpu_is_3410(void) - returns true for 3410 + ******************************************/ +u32 cpu_is_3410(void) +{ + int status; + if (get_cpu_rev() < CPU_3430_ES2) { + return 0; + } else { + /* read scalability status and return 1 for 3410*/ + status = __raw_readl(CONTROL_SCALABLE_OMAP_STATUS); + /* Check whether MPU frequency is set to 266 MHz which + * is nominal for 3410. If yes return true else false + */ + if (((status >> 8) & 0x3) == 0x2) + return 1; + else + return 0; + } +} + +/****************************************** + * beagle_identify + * Description: Detect if we are running on a Beagle revision Ax/Bx, + * C1/2/3, C4 or D. This can be done by reading + * the level of GPIO173, GPIO172 and GPIO171. This should + * result in + * GPIO173, GPIO172, GPIO171: 1 1 1 => Ax/Bx + * GPIO173, GPIO172, GPIO171: 1 1 0 => C1/2/3 + * GPIO173, GPIO172, GPIO171: 1 0 1 => C4 + * GPIO173, GPIO172, GPIO171: 0 0 0 => XM + ******************************************/ +int beagle_revision(void) +{ + int rev; + + omap_request_gpio(171); + omap_request_gpio(172); + omap_request_gpio(173); + omap_set_gpio_direction(171, 1); + omap_set_gpio_direction(172, 1); + omap_set_gpio_direction(173, 1); + + rev = omap_get_gpio_datain(173) << 2 | + omap_get_gpio_datain(172) << 1 | + omap_get_gpio_datain(171); + omap_free_gpio(171); + omap_free_gpio(172); + omap_free_gpio(173); + + return rev; +} + +/***************************************************************** + * sr32 - clear & set a value in a bit range for a 32 bit address + *****************************************************************/ +void sr32(u32 addr, u32 start_bit, u32 num_bits, u32 value) +{ + u32 tmp, msk = 0; + msk = 1 << num_bits; + --msk; + tmp = __raw_readl(addr) & ~(msk << start_bit); + tmp |= value << start_bit; + __raw_writel(tmp, addr); +} + +/********************************************************************* + * wait_on_value() - common routine to allow waiting for changes in + * volatile regs. + *********************************************************************/ +u32 wait_on_value(u32 read_bit_mask, u32 match_value, u32 read_addr, u32 bound) +{ + u32 i = 0, val; + do { + ++i; + val = __raw_readl(read_addr) & read_bit_mask; + if (val == match_value) + return 1; + if (i == bound) + return 0; + } while (1); +} + +#ifdef CFG_3430SDRAM_DDR +/********************************************************************* + * config_3430sdram_ddr() - Init DDR on 3430SDP dev board. + *********************************************************************/ +void config_3430sdram_ddr(void) +{ + /* reset sdrc controller */ + __raw_writel(SOFTRESET, SDRC_SYSCONFIG); + wait_on_value(BIT0, BIT0, SDRC_STATUS, 12000000); + __raw_writel(0, SDRC_SYSCONFIG); + + /* setup sdrc to ball mux */ + __raw_writel(SDP_SDRC_SHARING, SDRC_SHARING); + + if (beagle_revision() == REVISION_XM) { + __raw_writel(0x2, SDRC_CS_CFG); /* 256MB/bank */ + __raw_writel(SDP_SDRC_MDCFG_0_DDR_XM, SDRC_MCFG_0); + __raw_writel(SDP_SDRC_MDCFG_0_DDR_XM, SDRC_MCFG_1); + __raw_writel(MICRON_V_ACTIMA_200, SDRC_ACTIM_CTRLA_0); + __raw_writel(MICRON_V_ACTIMB_200, SDRC_ACTIM_CTRLB_0); + __raw_writel(MICRON_V_ACTIMA_200, SDRC_ACTIM_CTRLA_1); + __raw_writel(MICRON_V_ACTIMB_200, SDRC_ACTIM_CTRLB_1); + __raw_writel(SDP_3430_SDRC_RFR_CTRL_200MHz, SDRC_RFR_CTRL_0); + __raw_writel(SDP_3430_SDRC_RFR_CTRL_200MHz, SDRC_RFR_CTRL_1); + } else { + __raw_writel(0x1, SDRC_CS_CFG); /* 128MB/bank */ + __raw_writel(SDP_SDRC_MDCFG_0_DDR, SDRC_MCFG_0); + __raw_writel(SDP_SDRC_MDCFG_0_DDR, SDRC_MCFG_1); + __raw_writel(MICRON_V_ACTIMA_165, SDRC_ACTIM_CTRLA_0); + __raw_writel(MICRON_V_ACTIMB_165, SDRC_ACTIM_CTRLB_0); + __raw_writel(MICRON_V_ACTIMA_165, SDRC_ACTIM_CTRLA_1); + __raw_writel(MICRON_V_ACTIMB_165, SDRC_ACTIM_CTRLB_1); + __raw_writel(SDP_3430_SDRC_RFR_CTRL_165MHz, SDRC_RFR_CTRL_0); + __raw_writel(SDP_3430_SDRC_RFR_CTRL_165MHz, SDRC_RFR_CTRL_1); + } + + __raw_writel(SDP_SDRC_POWER_POP, SDRC_POWER); + + /* init sequence for mDDR/mSDR using manual commands (DDR is different) */ + __raw_writel(CMD_NOP, SDRC_MANUAL_0); + __raw_writel(CMD_NOP, SDRC_MANUAL_1); + + delay(5000); + + __raw_writel(CMD_PRECHARGE, SDRC_MANUAL_0); + __raw_writel(CMD_PRECHARGE, SDRC_MANUAL_1); + + __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_0); + __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_1); + + __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_0); + __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_1); + + /* set mr0 */ + __raw_writel(SDP_SDRC_MR_0_DDR, SDRC_MR_0); + __raw_writel(SDP_SDRC_MR_0_DDR, SDRC_MR_1); + + /* set up dll */ + __raw_writel(SDP_SDRC_DLLAB_CTRL, SDRC_DLLA_CTRL); + delay(0x2000); /* give time to lock */ + +} +#endif /* CFG_3430SDRAM_DDR */ + +/************************************************************* + * get_sys_clk_speed - determine reference oscillator speed + * based on known 32kHz clock and gptimer. + *************************************************************/ +u32 get_osc_clk_speed(void) +{ + u32 start, cstart, cend, cdiff, cdiv, val; + + val = __raw_readl(PRM_CLKSRC_CTRL); + + if (val & SYSCLKDIV_2) + cdiv = 2; + else + cdiv = 1; + + /* enable timer2 */ + val = __raw_readl(CM_CLKSEL_WKUP) | BIT0; + __raw_writel(val, CM_CLKSEL_WKUP); /* select sys_clk for GPT1 */ + + /* Enable I and F Clocks for GPT1 */ + val = __raw_readl(CM_ICLKEN_WKUP) | BIT0 | BIT2; + __raw_writel(val, CM_ICLKEN_WKUP); + val = __raw_readl(CM_FCLKEN_WKUP) | BIT0; + __raw_writel(val, CM_FCLKEN_WKUP); + + __raw_writel(0, OMAP34XX_GPT1 + TLDR); /* start counting at 0 */ + __raw_writel(GPT_EN, OMAP34XX_GPT1 + TCLR); /* enable clock */ + /* enable 32kHz source */ + /* enabled out of reset */ + /* determine sys_clk via gauging */ + + start = 20 + __raw_readl(S32K_CR); /* start time in 20 cycles */ + while (__raw_readl(S32K_CR) < start) ; /* dead loop till start time */ + cstart = __raw_readl(OMAP34XX_GPT1 + TCRR); /* get start sys_clk count */ + while (__raw_readl(S32K_CR) < (start + 20)) ; /* wait for 40 cycles */ + cend = __raw_readl(OMAP34XX_GPT1 + TCRR); /* get end sys_clk count */ + cdiff = cend - cstart; /* get elapsed ticks */ + cdiff *= cdiv; + + /* based on number of ticks assign speed */ + if (cdiff > 19000) + return S38_4M; + else if (cdiff > 15200) + return S26M; + else if (cdiff > 13000) + return S24M; + else if (cdiff > 9000) + return S19_2M; + else if (cdiff > 7600) + return S13M; + else + return S12M; +} + +/****************************************************************************** + * get_sys_clkin_sel() - returns the sys_clkin_sel field value based on + * -- input oscillator clock frequency. + * + *****************************************************************************/ +void get_sys_clkin_sel(u32 osc_clk, u32 *sys_clkin_sel) +{ + if (osc_clk == S38_4M) + *sys_clkin_sel = 4; + else if (osc_clk == S26M) + *sys_clkin_sel = 3; + else if (osc_clk == S19_2M) + *sys_clkin_sel = 2; + else if (osc_clk == S13M) + *sys_clkin_sel = 1; + else if (osc_clk == S12M) + *sys_clkin_sel = 0; +} + +/****************************************************************************** + * prcm_init() - inits clocks for PRCM as defined in clocks.h + * -- called from SRAM, or Flash (using temp SRAM stack). + *****************************************************************************/ +void prcm_init(void) +{ + u32 osc_clk = 0, sys_clkin_sel; + dpll_param *dpll_param_p; + u32 clk_index, sil_index; + + /* Gauge the input clock speed and find out the sys_clkin_sel + * value corresponding to the input clock. + */ + osc_clk = get_osc_clk_speed(); + get_sys_clkin_sel(osc_clk, &sys_clkin_sel); + + sr32(PRM_CLKSEL, 0, 3, sys_clkin_sel); /* set input crystal speed */ + + /* If the input clock is greater than 19.2M always divide/2 */ + if (sys_clkin_sel > 2) { + sr32(PRM_CLKSRC_CTRL, 6, 2, 2); /* input clock divider */ + clk_index = sys_clkin_sel / 2; + } else { + sr32(PRM_CLKSRC_CTRL, 6, 2, 1); /* input clock divider */ + clk_index = sys_clkin_sel; + } + + sr32(PRM_CLKSRC_CTRL, 0, 2, 0);/* Bypass mode: T2 inputs a square clock */ + + /* The DPLL tables are defined according to sysclk value and + * silicon revision. The clk_index value will be used to get + * the values for that input sysclk from the DPLL param table + * and sil_index will get the values for that SysClk for the + * appropriate silicon rev. + */ + sil_index = get_cpu_rev() - 1; + + /* Unlock MPU DPLL (slows things down, and needed later) */ + sr32(CM_CLKEN_PLL_MPU, 0, 3, PLL_LOW_POWER_BYPASS); + wait_on_value(BIT0, 0, CM_IDLEST_PLL_MPU, LDELAY); + + /* Getting the base address of Core DPLL param table */ + dpll_param_p = (dpll_param *) get_core_dpll_param(); + /* Moving it to the right sysclk and ES rev base */ + dpll_param_p = dpll_param_p + 3 * clk_index + sil_index; + /* CORE DPLL */ + /* sr32(CM_CLKSEL2_EMU) set override to work when asleep */ + sr32(CM_CLKEN_PLL, 0, 3, PLL_FAST_RELOCK_BYPASS); + wait_on_value(BIT0, 0, CM_IDLEST_CKGEN, LDELAY); + + /* For 3430 ES1.0 Errata 1.50, default value directly doesnt + work. write another value and then default value. */ + sr32(CM_CLKSEL1_EMU, 16, 5, CORE_M3X2 + 1); /* m3x2 */ + sr32(CM_CLKSEL1_EMU, 16, 5, CORE_M3X2); /* m3x2 */ + sr32(CM_CLKSEL1_PLL, 27, 2, dpll_param_p->m2); /* Set M2 */ + sr32(CM_CLKSEL1_PLL, 16, 11, dpll_param_p->m); /* Set M */ + sr32(CM_CLKSEL1_PLL, 8, 7, dpll_param_p->n); /* Set N */ + sr32(CM_CLKSEL1_PLL, 6, 1, 0); /* 96M Src */ + sr32(CM_CLKSEL_CORE, 8, 4, CORE_SSI_DIV); /* ssi */ + sr32(CM_CLKSEL_CORE, 4, 2, CORE_FUSB_DIV); /* fsusb */ + sr32(CM_CLKSEL_CORE, 2, 2, CORE_L4_DIV); /* l4 */ + sr32(CM_CLKSEL_CORE, 0, 2, CORE_L3_DIV); /* l3 */ + sr32(CM_CLKSEL_GFX, 0, 3, GFX_DIV); /* gfx */ + sr32(CM_CLKSEL_WKUP, 1, 2, WKUP_RSM); /* reset mgr */ + sr32(CM_CLKEN_PLL, 4, 4, dpll_param_p->fsel); /* FREQSEL */ + sr32(CM_CLKEN_PLL, 0, 3, PLL_LOCK); /* lock mode */ + wait_on_value(BIT0, 1, CM_IDLEST_CKGEN, LDELAY); + + /* Getting the base address to PER DPLL param table */ + dpll_param_p = (dpll_param *) get_per_dpll_param(); + /* Moving it to the right sysclk base */ + dpll_param_p = dpll_param_p + clk_index; + /* PER DPLL */ + sr32(CM_CLKEN_PLL, 16, 3, PLL_STOP); + wait_on_value(BIT1, 0, CM_IDLEST_CKGEN, LDELAY); + sr32(CM_CLKSEL1_EMU, 24, 5, PER_M6X2); /* set M6 */ + sr32(CM_CLKSEL_CAM, 0, 5, PER_M5X2); /* set M5 */ + sr32(CM_CLKSEL_DSS, 0, 5, PER_M4X2); /* set M4 */ + sr32(CM_CLKSEL_DSS, 8, 5, PER_M3X2); /* set M3 */ + + if (beagle_revision() == REVISION_XM) { + sr32(CM_CLKSEL3_PLL, 0, 5, CORE_DPLL_PARAM_M2); /* set M2 */ + sr32(CM_CLKSEL2_PLL, 8, 11, CORE_DPLL_PARAM_M); /* set m */ + sr32(CM_CLKSEL2_PLL, 0, 7, CORE_DPLL_PARAM_N); /* set n */ + } else { + sr32(CM_CLKSEL3_PLL, 0, 5, dpll_param_p->m2); /* set M2 */ + sr32(CM_CLKSEL2_PLL, 8, 11, dpll_param_p->m); /* set m */ + sr32(CM_CLKSEL2_PLL, 0, 7, dpll_param_p->n); /* set n */ + } + + sr32(CM_CLKEN_PLL, 20, 4, dpll_param_p->fsel); /* FREQSEL */ + sr32(CM_CLKEN_PLL, 16, 3, PLL_LOCK); /* lock mode */ + wait_on_value(BIT1, 2, CM_IDLEST_CKGEN, LDELAY); + + /* Getting the base address to MPU DPLL param table */ + dpll_param_p = (dpll_param *) get_mpu_dpll_param(); + + /* Moving it to the right sysclk and ES rev base */ + dpll_param_p = dpll_param_p + 3 * clk_index + sil_index; + + /* MPU DPLL (unlocked already) */ + sr32(CM_CLKSEL2_PLL_MPU, 0, 5, dpll_param_p->m2); /* Set M2 */ + sr32(CM_CLKSEL1_PLL_MPU, 8, 11, dpll_param_p->m); /* Set M */ + sr32(CM_CLKSEL1_PLL_MPU, 0, 7, dpll_param_p->n); /* Set N */ + sr32(CM_CLKEN_PLL_MPU, 4, 4, dpll_param_p->fsel); /* FREQSEL */ + sr32(CM_CLKEN_PLL_MPU, 0, 3, PLL_LOCK); /* lock mode */ + wait_on_value(BIT0, 1, CM_IDLEST_PLL_MPU, LDELAY); + + /* Getting the base address to IVA DPLL param table */ + dpll_param_p = (dpll_param *) get_iva_dpll_param(); + /* Moving it to the right sysclk and ES rev base */ + dpll_param_p = dpll_param_p + 3 * clk_index + sil_index; + /* IVA DPLL (set to 12*20=240MHz) */ + sr32(CM_CLKEN_PLL_IVA2, 0, 3, PLL_STOP); + wait_on_value(BIT0, 0, CM_IDLEST_PLL_IVA2, LDELAY); + sr32(CM_CLKSEL2_PLL_IVA2, 0, 5, dpll_param_p->m2); /* set M2 */ + sr32(CM_CLKSEL1_PLL_IVA2, 8, 11, dpll_param_p->m); /* set M */ + sr32(CM_CLKSEL1_PLL_IVA2, 0, 7, dpll_param_p->n); /* set N */ + sr32(CM_CLKEN_PLL_IVA2, 4, 4, dpll_param_p->fsel); /* FREQSEL */ + sr32(CM_CLKEN_PLL_IVA2, 0, 3, PLL_LOCK); /* lock mode */ + wait_on_value(BIT0, 1, CM_IDLEST_PLL_IVA2, LDELAY); + + /* Set up GPTimers to sys_clk source only */ + sr32(CM_CLKSEL_PER, 0, 8, 0xff); + sr32(CM_CLKSEL_WKUP, 0, 1, 1); + + delay(5000); +} + +/***************************************** + * Routine: secure_unlock + * Description: Setup security registers for access + * (GP Device only) + *****************************************/ +void secure_unlock(void) +{ + /* Permission values for registers -Full fledged permissions to all */ +#define UNLOCK_1 0xFFFFFFFF +#define UNLOCK_2 0x00000000 +#define UNLOCK_3 0x0000FFFF + /* Protection Module Register Target APE (PM_RT) */ + __raw_writel(UNLOCK_1, RT_REQ_INFO_PERMISSION_1); + __raw_writel(UNLOCK_1, RT_READ_PERMISSION_0); + __raw_writel(UNLOCK_1, RT_WRITE_PERMISSION_0); + __raw_writel(UNLOCK_2, RT_ADDR_MATCH_1); + + __raw_writel(UNLOCK_3, GPMC_REQ_INFO_PERMISSION_0); + __raw_writel(UNLOCK_3, GPMC_READ_PERMISSION_0); + __raw_writel(UNLOCK_3, GPMC_WRITE_PERMISSION_0); + + __raw_writel(UNLOCK_3, OCM_REQ_INFO_PERMISSION_0); + __raw_writel(UNLOCK_3, OCM_READ_PERMISSION_0); + __raw_writel(UNLOCK_3, OCM_WRITE_PERMISSION_0); + __raw_writel(UNLOCK_2, OCM_ADDR_MATCH_2); + + /* IVA Changes */ + __raw_writel(UNLOCK_3, IVA2_REQ_INFO_PERMISSION_0); + __raw_writel(UNLOCK_3, IVA2_READ_PERMISSION_0); + __raw_writel(UNLOCK_3, IVA2_WRITE_PERMISSION_0); + + __raw_writel(UNLOCK_1, SMS_RG_ATT0); /* SDRC region 0 public */ +} + +/********************************************************** + * Routine: try_unlock_sram() + * Description: If chip is GP type, unlock the SRAM for + * general use. + ***********************************************************/ +void try_unlock_memory(void) +{ + int mode; + + /* if GP device unlock device SRAM for general use */ + /* secure code breaks for Secure/Emulation device - HS/E/T */ + mode = get_device_type(); + if (mode == GP_DEVICE) + secure_unlock(); + return; +} + +/********************************************************** + * Routine: s_init + * Description: Does early system init of muxing and clocks. + * - Called at time when only stack is available. + **********************************************************/ + +void s_init(void) +{ + watchdog_init(); +#ifdef CONFIG_3430_AS_3410 + /* setup the scalability control register for + * 3430 to work in 3410 mode + */ + __raw_writel(0x5ABF, CONTROL_SCALABLE_OMAP_OCP); +#endif + try_unlock_memory(); + set_muxconf_regs(); + delay(100); + per_clocks_enable(); + prcm_init(); + config_3430sdram_ddr(); +} + +/******************************************************* + * Routine: misc_init_r + * Description: Init ethernet (done here so udelay works) + ********************************************************/ +int misc_init_r(void) +{ + int rev; + + rev = beagle_revision(); + switch (rev) { + case REVISION_AXBX: + printf("Beagle Rev Ax/Bx\n"); + break; + case REVISION_CX: + printf("Beagle Rev C1/C2/C3\n"); + break; + case REVISION_C4: + printf("Beagle Rev C4\n"); + break; + case REVISION_XM: + printf("Beagle xM Rev A\n"); + break; + default: + printf("Beagle unknown 0x%02x\n", rev); + } + + return 0; +} + +/****************************************************** + * Routine: wait_for_command_complete + * Description: Wait for posting to finish on watchdog + ******************************************************/ +void wait_for_command_complete(unsigned int wd_base) +{ + int pending = 1; + do { + pending = __raw_readl(wd_base + WWPS); + } while (pending); +} + +/**************************************** + * Routine: watchdog_init + * Description: Shut down watch dogs + *****************************************/ +void watchdog_init(void) +{ + /* There are 3 watch dogs WD1=Secure, WD2=MPU, WD3=IVA. WD1 is + * either taken care of by ROM (HS/EMU) or not accessible (GP). + * We need to take care of WD2-MPU or take a PRCM reset. WD3 + * should not be running and does not generate a PRCM reset. + */ + sr32(CM_FCLKEN_WKUP, 5, 1, 1); + sr32(CM_ICLKEN_WKUP, 5, 1, 1); + wait_on_value(BIT5, 0x20, CM_IDLEST_WKUP, 5); /* some issue here */ + + __raw_writel(WD_UNLOCK1, WD2_BASE + WSPR); + wait_for_command_complete(WD2_BASE); + __raw_writel(WD_UNLOCK2, WD2_BASE + WSPR); +} + +/********************************************** + * Routine: dram_init + * Description: sets uboots idea of sdram size + **********************************************/ +int dram_init(void) +{ + return 0; +} + +/***************************************************************** + * Routine: peripheral_enable + * Description: Enable the clks & power for perifs (GPT2, UART1,...) + ******************************************************************/ +void per_clocks_enable(void) +{ + /* Enable GP2 timer. */ + sr32(CM_CLKSEL_PER, 0, 1, 0x1); /* GPT2 = sys clk */ + sr32(CM_ICLKEN_PER, 3, 1, 0x1); /* ICKen GPT2 */ + sr32(CM_FCLKEN_PER, 3, 1, 0x1); /* FCKen GPT2 */ + +#ifdef CFG_NS16550 + /* UART1 clocks */ + sr32(CM_FCLKEN1_CORE, 13, 1, 0x1); + sr32(CM_ICLKEN1_CORE, 13, 1, 0x1); + + /* UART 3 Clocks */ + sr32(CM_FCLKEN_PER, 11, 1, 0x1); + sr32(CM_ICLKEN_PER, 11, 1, 0x1); + +#endif + +#ifdef CONFIG_DRIVER_OMAP34XX_I2C + /* Turn on all 3 I2C clocks */ + sr32(CM_FCLKEN1_CORE, 15, 3, 0x7); + sr32(CM_ICLKEN1_CORE, 15, 3, 0x7); /* I2C1,2,3 = on */ +#endif + + /* Enable the ICLK for 32K Sync Timer as its used in udelay */ + sr32(CM_ICLKEN_WKUP, 2, 1, 0x1); + + sr32(CM_FCLKEN_IVA2, 0, 32, FCK_IVA2_ON); + sr32(CM_FCLKEN1_CORE, 0, 32, FCK_CORE1_ON); + sr32(CM_ICLKEN1_CORE, 0, 32, ICK_CORE1_ON); + sr32(CM_ICLKEN2_CORE, 0, 32, ICK_CORE2_ON); + sr32(CM_FCLKEN_WKUP, 0, 32, FCK_WKUP_ON); + sr32(CM_ICLKEN_WKUP, 0, 32, ICK_WKUP_ON); + sr32(CM_FCLKEN_DSS, 0, 32, FCK_DSS_ON); + sr32(CM_ICLKEN_DSS, 0, 32, ICK_DSS_ON); + sr32(CM_FCLKEN_CAM, 0, 32, FCK_CAM_ON); + sr32(CM_ICLKEN_CAM, 0, 32, ICK_CAM_ON); + sr32(CM_FCLKEN_PER, 0, 32, FCK_PER_ON); + sr32(CM_ICLKEN_PER, 0, 32, ICK_PER_ON); + + /* Enable GPIO 5 & GPIO 6 clocks */ + sr32(CM_FCLKEN_PER, 17, 2, 0x3); + sr32(CM_ICLKEN_PER, 17, 2, 0x3); + + delay(1000); +} + +/* Set MUX for UART, GPMC, SDRC, GPIO */ + +#define MUX_VAL(OFFSET,VALUE)\ + __raw_writew((VALUE), OMAP34XX_CTRL_BASE + (OFFSET)); + +#define CP(x) (CONTROL_PADCONF_##x) +/* + * IEN - Input Enable + * IDIS - Input Disable + * PTD - Pull type Down + * PTU - Pull type Up + * DIS - Pull type selection is inactive + * EN - Pull type selection is active + * M0 - Mode 0 + * The commented string gives the final mux configuration for that pin + */ +#define MUX_DEFAULT()\ + MUX_VAL(CP(SDRC_D0), (IEN | PTD | DIS | M0)) /*SDRC_D0*/\ + MUX_VAL(CP(SDRC_D1), (IEN | PTD | DIS | M0)) /*SDRC_D1*/\ + MUX_VAL(CP(SDRC_D2), (IEN | PTD | DIS | M0)) /*SDRC_D2*/\ + MUX_VAL(CP(SDRC_D3), (IEN | PTD | DIS | M0)) /*SDRC_D3*/\ + MUX_VAL(CP(SDRC_D4), (IEN | PTD | DIS | M0)) /*SDRC_D4*/\ + MUX_VAL(CP(SDRC_D5), (IEN | PTD | DIS | M0)) /*SDRC_D5*/\ + MUX_VAL(CP(SDRC_D6), (IEN | PTD | DIS | M0)) /*SDRC_D6*/\ + MUX_VAL(CP(SDRC_D7), (IEN | PTD | DIS | M0)) /*SDRC_D7*/\ + MUX_VAL(CP(SDRC_D8), (IEN | PTD | DIS | M0)) /*SDRC_D8*/\ + MUX_VAL(CP(SDRC_D9), (IEN | PTD | DIS | M0)) /*SDRC_D9*/\ + MUX_VAL(CP(SDRC_D10), (IEN | PTD | DIS | M0)) /*SDRC_D10*/\ + MUX_VAL(CP(SDRC_D11), (IEN | PTD | DIS | M0)) /*SDRC_D11*/\ + MUX_VAL(CP(SDRC_D12), (IEN | PTD | DIS | M0)) /*SDRC_D12*/\ + MUX_VAL(CP(SDRC_D13), (IEN | PTD | DIS | M0)) /*SDRC_D13*/\ + MUX_VAL(CP(SDRC_D14), (IEN | PTD | DIS | M0)) /*SDRC_D14*/\ + MUX_VAL(CP(SDRC_D15), (IEN | PTD | DIS | M0)) /*SDRC_D15*/\ + MUX_VAL(CP(SDRC_D16), (IEN | PTD | DIS | M0)) /*SDRC_D16*/\ + MUX_VAL(CP(SDRC_D17), (IEN | PTD | DIS | M0)) /*SDRC_D17*/\ + MUX_VAL(CP(SDRC_D18), (IEN | PTD | DIS | M0)) /*SDRC_D18*/\ + MUX_VAL(CP(SDRC_D19), (IEN | PTD | DIS | M0)) /*SDRC_D19*/\ + MUX_VAL(CP(SDRC_D20), (IEN | PTD | DIS | M0)) /*SDRC_D20*/\ + MUX_VAL(CP(SDRC_D21), (IEN | PTD | DIS | M0)) /*SDRC_D21*/\ + MUX_VAL(CP(SDRC_D22), (IEN | PTD | DIS | M0)) /*SDRC_D22*/\ + MUX_VAL(CP(SDRC_D23), (IEN | PTD | DIS | M0)) /*SDRC_D23*/\ + MUX_VAL(CP(SDRC_D24), (IEN | PTD | DIS | M0)) /*SDRC_D24*/\ + MUX_VAL(CP(SDRC_D25), (IEN | PTD | DIS | M0)) /*SDRC_D25*/\ + MUX_VAL(CP(SDRC_D26), (IEN | PTD | DIS | M0)) /*SDRC_D26*/\ + MUX_VAL(CP(SDRC_D27), (IEN | PTD | DIS | M0)) /*SDRC_D27*/\ + MUX_VAL(CP(SDRC_D28), (IEN | PTD | DIS | M0)) /*SDRC_D28*/\ + MUX_VAL(CP(SDRC_D29), (IEN | PTD | DIS | M0)) /*SDRC_D29*/\ + MUX_VAL(CP(SDRC_D30), (IEN | PTD | DIS | M0)) /*SDRC_D30*/\ + MUX_VAL(CP(SDRC_D31), (IEN | PTD | DIS | M0)) /*SDRC_D31*/\ + MUX_VAL(CP(SDRC_CLK), (IEN | PTD | DIS | M0)) /*SDRC_CLK*/\ + MUX_VAL(CP(SDRC_DQS0), (IEN | PTD | DIS | M0)) /*SDRC_DQS0*/\ + MUX_VAL(CP(SDRC_DQS1), (IEN | PTD | DIS | M0)) /*SDRC_DQS1*/\ + MUX_VAL(CP(SDRC_DQS2), (IEN | PTD | DIS | M0)) /*SDRC_DQS2*/\ + MUX_VAL(CP(SDRC_DQS3), (IEN | PTD | DIS | M0)) /*SDRC_DQS3*/\ + MUX_VAL(CP(GPMC_A1), (IDIS | PTD | DIS | M0)) /*GPMC_A1*/\ + MUX_VAL(CP(GPMC_A2), (IDIS | PTD | DIS | M0)) /*GPMC_A2*/\ + MUX_VAL(CP(GPMC_A3), (IDIS | PTD | DIS | M0)) /*GPMC_A3*/\ + MUX_VAL(CP(GPMC_A4), (IDIS | PTD | DIS | M0)) /*GPMC_A4*/\ + MUX_VAL(CP(GPMC_A5), (IDIS | PTD | DIS | M0)) /*GPMC_A5*/\ + MUX_VAL(CP(GPMC_A6), (IDIS | PTD | DIS | M0)) /*GPMC_A6*/\ + MUX_VAL(CP(GPMC_A7), (IDIS | PTD | DIS | M0)) /*GPMC_A7*/\ + MUX_VAL(CP(GPMC_A8), (IDIS | PTD | DIS | M0)) /*GPMC_A8*/\ + MUX_VAL(CP(GPMC_A9), (IDIS | PTD | DIS | M0)) /*GPMC_A9*/\ + MUX_VAL(CP(GPMC_A10), (IDIS | PTD | DIS | M0)) /*GPMC_A10*/\ + MUX_VAL(CP(GPMC_D0), (IEN | PTD | DIS | M0)) /*GPMC_D0*/\ + MUX_VAL(CP(GPMC_D1), (IEN | PTD | DIS | M0)) /*GPMC_D1*/\ + MUX_VAL(CP(GPMC_D2), (IEN | PTD | DIS | M0)) /*GPMC_D2*/\ + MUX_VAL(CP(GPMC_D3), (IEN | PTD | DIS | M0)) /*GPMC_D3*/\ + MUX_VAL(CP(GPMC_D4), (IEN | PTD | DIS | M0)) /*GPMC_D4*/\ + MUX_VAL(CP(GPMC_D5), (IEN | PTD | DIS | M0)) /*GPMC_D5*/\ + MUX_VAL(CP(GPMC_D6), (IEN | PTD | DIS | M0)) /*GPMC_D6*/\ + MUX_VAL(CP(GPMC_D7), (IEN | PTD | DIS | M0)) /*GPMC_D7*/\ + MUX_VAL(CP(GPMC_D8), (IEN | PTD | DIS | M0)) /*GPMC_D8*/\ + MUX_VAL(CP(GPMC_D9), (IEN | PTD | DIS | M0)) /*GPMC_D9*/\ + MUX_VAL(CP(GPMC_D10), (IEN | PTD | DIS | M0)) /*GPMC_D10*/\ + MUX_VAL(CP(GPMC_D11), (IEN | PTD | DIS | M0)) /*GPMC_D11*/\ + MUX_VAL(CP(GPMC_D12), (IEN | PTD | DIS | M0)) /*GPMC_D12*/\ + MUX_VAL(CP(GPMC_D13), (IEN | PTD | DIS | M0)) /*GPMC_D13*/\ + MUX_VAL(CP(GPMC_D14), (IEN | PTD | DIS | M0)) /*GPMC_D14*/\ + MUX_VAL(CP(GPMC_D15), (IEN | PTD | DIS | M0)) /*GPMC_D15*/\ + MUX_VAL(CP(GPMC_nCS0), (IDIS | PTU | EN | M0)) /*GPMC_nCS0*/\ + MUX_VAL(CP(GPMC_nCS1), (IDIS | PTU | EN | M0)) /*GPMC_nCS1*/\ + MUX_VAL(CP(GPMC_nCS2), (IDIS | PTU | EN | M0)) /*GPMC_nCS2*/\ + MUX_VAL(CP(GPMC_nCS3), (IDIS | PTU | EN | M0)) /*GPMC_nCS3*/\ + MUX_VAL(CP(GPMC_nCS4), (IDIS | PTU | EN | M0)) /*GPMC_nCS4*/\ + MUX_VAL(CP(GPMC_nCS5), (IDIS | PTD | DIS | M0)) /*GPMC_nCS5*/\ + MUX_VAL(CP(GPMC_nCS6), (IEN | PTD | DIS | M1)) /*GPMC_nCS6*/\ + MUX_VAL(CP(GPMC_nCS7), (IEN | PTU | EN | M1)) /*GPMC_nCS7*/\ + MUX_VAL(CP(GPMC_CLK), (IDIS | PTD | DIS | M0)) /*GPMC_CLK*/\ + MUX_VAL(CP(GPMC_nADV_ALE), (IDIS | PTD | DIS | M0)) /*GPMC_nADV_ALE*/\ + MUX_VAL(CP(GPMC_nOE), (IDIS | PTD | DIS | M0)) /*GPMC_nOE*/\ + MUX_VAL(CP(GPMC_nWE), (IDIS | PTD | DIS | M0)) /*GPMC_nWE*/\ + MUX_VAL(CP(GPMC_nBE0_CLE), (IDIS | PTD | DIS | M0)) /*GPMC_nBE0_CLE*/\ + MUX_VAL(CP(GPMC_nBE1), (IEN | PTD | DIS | M0)) /*GPIO_61*/\ + MUX_VAL(CP(GPMC_nWP), (IEN | PTD | DIS | M0)) /*GPMC_nWP*/\ + MUX_VAL(CP(GPMC_WAIT0), (IEN | PTU | EN | M0)) /*GPMC_WAIT0*/\ + MUX_VAL(CP(GPMC_WAIT1), (IEN | PTU | EN | M0)) /*GPMC_WAIT1*/\ + MUX_VAL(CP(GPMC_WAIT2), (IEN | PTU | EN | M0)) /*GPIO_64*/\ + MUX_VAL(CP(GPMC_WAIT3), (IEN | PTU | EN | M0)) /*GPIO_65*/\ + MUX_VAL(CP(DSS_DATA18), (IEN | PTD | DIS | M4)) /*GPIO_88*/\ + MUX_VAL(CP(DSS_DATA19), (IEN | PTD | DIS | M4)) /*GPIO_89*/\ + MUX_VAL(CP(DSS_DATA20), (IEN | PTD | DIS | M4)) /*GPIO_90*/\ + MUX_VAL(CP(DSS_DATA21), (IEN | PTD | DIS | M4)) /*GPIO_91*/\ + MUX_VAL(CP(CAM_WEN), (IEN | PTD | DIS | M4)) /*GPIO_167*/\ + MUX_VAL(CP(MMC1_CLK), (IDIS | PTU | EN | M0)) /*MMC1_CLK*/\ + MUX_VAL(CP(MMC1_CMD), (IEN | PTU | EN | M0)) /*MMC1_CMD*/\ + MUX_VAL(CP(MMC1_DAT0), (IEN | PTU | EN | M0)) /*MMC1_DAT0*/\ + MUX_VAL(CP(MMC1_DAT1), (IEN | PTU | EN | M0)) /*MMC1_DAT1*/\ + MUX_VAL(CP(MMC1_DAT2), (IEN | PTU | EN | M0)) /*MMC1_DAT2*/\ + MUX_VAL(CP(MMC1_DAT3), (IEN | PTU | EN | M0)) /*MMC1_DAT3*/\ + MUX_VAL(CP(MMC1_DAT4), (IEN | PTU | EN | M0)) /*MMC1_DAT4*/\ + MUX_VAL(CP(MMC1_DAT5), (IEN | PTU | EN | M0)) /*MMC1_DAT5*/\ + MUX_VAL(CP(MMC1_DAT6), (IEN | PTU | EN | M0)) /*MMC1_DAT6*/\ + MUX_VAL(CP(MMC1_DAT7), (IEN | PTU | EN | M0)) /*MMC1_DAT7*/\ + MUX_VAL(CP(UART1_TX), (IDIS | PTD | DIS | M0)) /*UART1_TX*/\ + MUX_VAL(CP(UART1_RTS), (IDIS | PTD | DIS | M4)) /*GPIO_149*/\ + MUX_VAL(CP(UART1_CTS), (IDIS | PTD | DIS | M4)) /*GPIO_150*/\ + MUX_VAL(CP(UART1_RX), (IEN | PTD | DIS | M0)) /*UART1_RX*/\ + MUX_VAL(CP(UART3_CTS_RCTX), (IEN | PTD | EN | M0)) /*UART3_CTS_RCTX */\ + MUX_VAL(CP(UART3_RTS_SD), (IDIS | PTD | DIS | M0)) /*UART3_RTS_SD */\ + MUX_VAL(CP(UART3_RX_IRRX), (IEN | PTD | DIS | M0)) /*UART3_RX_IRRX*/\ + MUX_VAL(CP(UART3_TX_IRTX), (IDIS | PTD | DIS | M0)) /*UART3_TX_IRTX*/\ + MUX_VAL(CP(I2C1_SCL), (IEN | PTU | EN | M0)) /*I2C1_SCL*/\ + MUX_VAL(CP(I2C1_SDA), (IEN | PTU | EN | M0)) /*I2C1_SDA*/\ + MUX_VAL(CP(I2C2_SCL), (IEN | PTU | EN | M0)) /*I2C2_SCL*/\ + MUX_VAL(CP(I2C2_SDA), (IEN | PTU | EN | M0)) /*I2C2_SDA*/\ + MUX_VAL(CP(I2C3_SCL), (IEN | PTU | EN | M0)) /*I2C3_SCL*/\ + MUX_VAL(CP(I2C3_SDA), (IEN | PTU | EN | M0)) /*I2C3_SDA*/\ + MUX_VAL(CP(I2C4_SCL), (IEN | PTU | EN | M0)) /*I2C4_SCL*/\ + MUX_VAL(CP(I2C4_SDA), (IEN | PTU | EN | M0)) /*I2C4_SDA*/\ + MUX_VAL(CP(McSPI1_CLK), (IEN | PTU | EN | M4)) /*GPIO_171*/\ + MUX_VAL(CP(McSPI1_SIMO), (IEN | PTU | EN | M4)) /*GPIO_172*/\ + MUX_VAL(CP(McSPI1_SOMI), (IEN | PTU | EN | M4)) /*GPIO_173*/\ + MUX_VAL(CP(McBSP1_DX), (IEN | PTD | DIS | M4)) /*GPIO_158*/\ + MUX_VAL(CP(SYS_32K), (IEN | PTD | DIS | M0)) /*SYS_32K*/\ + MUX_VAL(CP(SYS_BOOT0), (IEN | PTD | DIS | M4)) /*GPIO_2 */\ + MUX_VAL(CP(SYS_BOOT1), (IEN | PTD | DIS | M4)) /*GPIO_3 */\ + MUX_VAL(CP(SYS_BOOT2), (IEN | PTD | DIS | M4)) /*GPIO_4 */\ + MUX_VAL(CP(SYS_BOOT3), (IEN | PTD | DIS | M4)) /*GPIO_5 */\ + MUX_VAL(CP(SYS_BOOT4), (IEN | PTD | DIS | M4)) /*GPIO_6 */\ + MUX_VAL(CP(SYS_BOOT5), (IEN | PTD | DIS | M4)) /*GPIO_7 */\ + MUX_VAL(CP(SYS_BOOT6), (IEN | PTD | DIS | M4)) /*GPIO_8 */\ + MUX_VAL(CP(SYS_CLKOUT2), (IEN | PTU | EN | M4)) /*GPIO_186*/\ + MUX_VAL(CP(JTAG_nTRST), (IEN | PTD | DIS | M0)) /*JTAG_nTRST*/\ + MUX_VAL(CP(JTAG_TCK), (IEN | PTD | DIS | M0)) /*JTAG_TCK*/\ + MUX_VAL(CP(JTAG_TMS), (IEN | PTD | DIS | M0)) /*JTAG_TMS*/\ + MUX_VAL(CP(JTAG_TDI), (IEN | PTD | DIS | M0)) /*JTAG_TDI*/\ + MUX_VAL(CP(JTAG_EMU0), (IEN | PTD | DIS | M0)) /*JTAG_EMU0*/\ + MUX_VAL(CP(JTAG_EMU1), (IEN | PTD | DIS | M0)) /*JTAG_EMU1*/\ + MUX_VAL(CP(ETK_CLK), (IEN | PTD | DIS | M4)) /*GPIO_12*/\ + MUX_VAL(CP(ETK_CTL), (IEN | PTD | DIS | M4)) /*GPIO_13*/\ + MUX_VAL(CP(ETK_D0), (IEN | PTD | DIS | M4)) /*GPIO_14*/\ + MUX_VAL(CP(ETK_D1), (IEN | PTD | DIS | M4)) /*GPIO_15*/\ + MUX_VAL(CP(ETK_D2), (IEN | PTD | DIS | M4)) /*GPIO_16*/\ + MUX_VAL(CP(ETK_D11), (IEN | PTD | DIS | M4)) /*GPIO_25*/\ + MUX_VAL(CP(ETK_D12), (IEN | PTD | DIS | M4)) /*GPIO_26*/\ + MUX_VAL(CP(ETK_D13), (IEN | PTD | DIS | M4)) /*GPIO_27*/\ + MUX_VAL(CP(ETK_D14), (IEN | PTD | DIS | M4)) /*GPIO_28*/\ + MUX_VAL(CP(ETK_D15), (IEN | PTD | DIS | M4)) /*GPIO_29 */\ + MUX_VAL(CP(sdrc_cke0), (IDIS | PTU | EN | M0)) /*sdrc_cke0 */\ + MUX_VAL(CP(sdrc_cke1), (IDIS | PTD | DIS | M7)) /*sdrc_cke1 not used*/ + +/********************************************************** + * Routine: set_muxconf_regs + * Description: Setting up the configuration Mux registers + * specific to the hardware. Many pins need + * to be moved from protect to primary mode. + *********************************************************/ +void set_muxconf_regs(void) +{ + MUX_DEFAULT(); +} + +/********************************************************** + * Routine: nand+_init + * Description: Set up nand for nand and jffs2 commands + *********************************************************/ + +int nand_init(void) +{ + /* global settings */ + __raw_writel(0x10, GPMC_SYSCONFIG); /* smart idle */ + __raw_writel(0x0, GPMC_IRQENABLE); /* isr's sources masked */ + __raw_writel(0, GPMC_TIMEOUT_CONTROL);/* timeout disable */ + + /* Set the GPMC Vals, NAND is mapped at CS0, oneNAND at CS0. + * We configure only GPMC CS0 with required values. Configiring other devices + * at other CS is done in u-boot. So we don't have to bother doing it here. + */ + __raw_writel(0 , GPMC_CONFIG7 + GPMC_CONFIG_CS0); + delay(1000); + + if ((get_mem_type() == GPMC_NAND) || (get_mem_type() == MMC_NAND)) { + __raw_writel(M_NAND_GPMC_CONFIG1, GPMC_CONFIG1 + GPMC_CONFIG_CS0); + __raw_writel(M_NAND_GPMC_CONFIG2, GPMC_CONFIG2 + GPMC_CONFIG_CS0); + __raw_writel(M_NAND_GPMC_CONFIG3, GPMC_CONFIG3 + GPMC_CONFIG_CS0); + __raw_writel(M_NAND_GPMC_CONFIG4, GPMC_CONFIG4 + GPMC_CONFIG_CS0); + __raw_writel(M_NAND_GPMC_CONFIG5, GPMC_CONFIG5 + GPMC_CONFIG_CS0); + __raw_writel(M_NAND_GPMC_CONFIG6, GPMC_CONFIG6 + GPMC_CONFIG_CS0); + + /* Enable the GPMC Mapping */ + __raw_writel((((OMAP34XX_GPMC_CS0_SIZE & 0xF)<<8) | + ((NAND_BASE_ADR>>24) & 0x3F) | + (1<<6)), (GPMC_CONFIG7 + GPMC_CONFIG_CS0)); + delay(2000); + + if (nand_chip()) { +#ifdef CFG_PRINTF + printf("Unsupported Chip!\n"); +#endif + return 1; + } + + } + + if ((get_mem_type() == GPMC_ONENAND) || (get_mem_type() == MMC_ONENAND)) { + __raw_writel(ONENAND_GPMC_CONFIG1, GPMC_CONFIG1 + GPMC_CONFIG_CS0); + __raw_writel(ONENAND_GPMC_CONFIG2, GPMC_CONFIG2 + GPMC_CONFIG_CS0); + __raw_writel(ONENAND_GPMC_CONFIG3, GPMC_CONFIG3 + GPMC_CONFIG_CS0); + __raw_writel(ONENAND_GPMC_CONFIG4, GPMC_CONFIG4 + GPMC_CONFIG_CS0); + __raw_writel(ONENAND_GPMC_CONFIG5, GPMC_CONFIG5 + GPMC_CONFIG_CS0); + __raw_writel(ONENAND_GPMC_CONFIG6, GPMC_CONFIG6 + GPMC_CONFIG_CS0); + + /* Enable the GPMC Mapping */ + __raw_writel((((OMAP34XX_GPMC_CS0_SIZE & 0xF)<<8) | + ((ONENAND_BASE>>24) & 0x3F) | + (1<<6)), (GPMC_CONFIG7 + GPMC_CONFIG_CS0)); + delay(2000); + + if (onenand_chip()) { +#ifdef CFG_PRINTF + printf("OneNAND Unsupported !\n"); +#endif + return 1; + } + } + return 0; +} + +#define DEBUG_LED1 149 /* gpio */ +#define DEBUG_LED2 150 /* gpio */ + +void blinkLEDs() +{ + void *p; + + /* Alternately turn the LEDs on and off */ + p = (unsigned long *)OMAP34XX_GPIO5_BASE; + while (1) { + /* turn LED1 on and LED2 off */ + *(unsigned long *)(p + 0x94) = 1 << (DEBUG_LED1 % 32); + *(unsigned long *)(p + 0x90) = 1 << (DEBUG_LED2 % 32); + + /* delay for a while */ + delay(1000); + + /* turn LED1 off and LED2 on */ + *(unsigned long *)(p + 0x90) = 1 << (DEBUG_LED1 % 32); + *(unsigned long *)(p + 0x94) = 1 << (DEBUG_LED2 % 32); + + /* delay for a while */ + delay(1000); + } +} + +/* optionally do something like blinking LED */ +void board_hang(void) +{ + while (1) + blinkLEDs(); +} + +/****************************************************************************** + * Dummy function to handle errors for EABI incompatibility + *****************************************************************************/ +void raise(void) +{ +} + +/****************************************************************************** + * Dummy function to handle errors for EABI incompatibility + *****************************************************************************/ +void abort(void) +{ +} diff --git a/x-loader/board/omap3530beagle/platform.S b/x-loader/board/omap3530beagle/platform.S new file mode 100644 index 0000000..5869270 --- /dev/null +++ b/x-loader/board/omap3530beagle/platform.S @@ -0,0 +1,360 @@ +/* + * Board specific setup info + * + * (C) Copyright 2004-2006 + * Texas Instruments, <www.ti.com> + * Richard Woodruff <r-woodruff2@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <asm/arch/cpu.h> +#include <asm/arch/mem.h> +#include <asm/arch/clocks.h> + +_TEXT_BASE: + .word TEXT_BASE /* sdram load addr from config.mk */ + +#if !defined(CFG_NAND_BOOT) && !defined(CFG_NAND_BOOT) +/************************************************************************** + * cpy_clk_code: relocates clock code into SRAM where its safer to execute + * R1 = SRAM destination address. + *************************************************************************/ +.global cpy_clk_code + cpy_clk_code: + /* Copy DPLL code into SRAM */ + adr r0, go_to_speed /* get addr of clock setting code */ + mov r2, #384 /* r2 size to copy (div by 32 bytes) */ + mov r1, r1 /* r1 <- dest address (passed in) */ + add r2, r2, r0 /* r2 <- source end address */ +next2: + ldmia r0!, {r3-r10} /* copy from source address [r0] */ + stmia r1!, {r3-r10} /* copy to target address [r1] */ + cmp r0, r2 /* until source end address [r2] */ + bne next2 + mov pc, lr /* back to caller */ + +/* **************************************************************************** + * NOTE: 3430 X-loader currently does not use this code. +* It could be removed its is kept for compatabily with u-boot. + * + * go_to_speed: -Moves to bypass, -Commits clock dividers, -puts dpll at speed + * -executed from SRAM. + * R0 = CM_CLKEN_PLL-bypass value + * R1 = CM_CLKSEL1_PLL-m, n, and divider values + * R2 = CM_CLKSEL_CORE-divider values + * R3 = CM_IDLEST_CKGEN - addr dpll lock wait + * + * Note: If core unlocks/relocks and SDRAM is running fast already it gets + * confused. A reset of the controller gets it back. Taking away its + * L3 when its not in self refresh seems bad for it. Normally, this code + * runs from flash before SDR is init so that should be ok. + ******************************************************************************/ +.global go_to_speed + go_to_speed: + stmfd sp!, {r4-r6} + + /* move into fast relock bypass */ + ldr r4, pll_ctl_add + str r0, [r4] +wait1: + ldr r5, [r3] /* get status */ + and r5, r5, #0x1 /* isolate core status */ + cmp r5, #0x1 /* still locked? */ + beq wait1 /* if lock, loop */ + + /* set new dpll dividers _after_ in bypass */ + ldr r5, pll_div_add1 + str r1, [r5] /* set m, n, m2 */ + ldr r5, pll_div_add2 + str r2, [r5] /* set l3/l4/.. dividers*/ + ldr r5, pll_div_add3 /* wkup */ + ldr r2, pll_div_val3 /* rsm val */ + str r2, [r5] + ldr r5, pll_div_add4 /* gfx */ + ldr r2, pll_div_val4 + str r2, [r5] + ldr r5, pll_div_add5 /* emu */ + ldr r2, pll_div_val5 + str r2, [r5] + + /* now prepare GPMC (flash) for new dpll speed */ + /* flash needs to be stable when we jump back to it */ + ldr r5, flash_cfg3_addr + ldr r2, flash_cfg3_val + str r2, [r5] + ldr r5, flash_cfg4_addr + ldr r2, flash_cfg4_val + str r2, [r5] + ldr r5, flash_cfg5_addr + ldr r2, flash_cfg5_val + str r2, [r5] + ldr r5, flash_cfg1_addr + ldr r2, [r5] + orr r2, r2, #0x3 /* up gpmc divider */ + str r2, [r5] + + /* lock DPLL3 and wait a bit */ + orr r0, r0, #0x7 /* set up for lock mode */ + str r0, [r4] /* lock */ + nop /* ARM slow at this point working at sys_clk */ + nop + nop + nop +wait2: + ldr r5, [r3] /* get status */ + and r5, r5, #0x1 /* isolate core status */ + cmp r5, #0x1 /* still locked? */ + bne wait2 /* if lock, loop */ + nop + nop + nop + nop + ldmfd sp!, {r4-r6} + mov pc, lr /* back to caller, locked */ + +_go_to_speed: .word go_to_speed + +/* these constants need to be close for PIC code */ +/* The Nor has to be in the Flash Base CS0 for this condition to happen */ +flash_cfg1_addr: + .word (GPMC_CONFIG_CS0 + GPMC_CONFIG1) +flash_cfg3_addr: + .word (GPMC_CONFIG_CS0 + GPMC_CONFIG3) +flash_cfg3_val: + .word STNOR_GPMC_CONFIG3 +flash_cfg4_addr: + .word (GPMC_CONFIG_CS0 + GPMC_CONFIG4) +flash_cfg4_val: + .word STNOR_GPMC_CONFIG4 +flash_cfg5_val: + .word STNOR_GPMC_CONFIG5 +flash_cfg5_addr: + .word (GPMC_CONFIG_CS0 + GPMC_CONFIG5) +pll_ctl_add: + .word CM_CLKEN_PLL +pll_div_add1: + .word CM_CLKSEL1_PLL +pll_div_add2: + .word CM_CLKSEL_CORE +pll_div_add3: + .word CM_CLKSEL_WKUP +pll_div_val3: + .word (WKUP_RSM << 1) +pll_div_add4: + .word CM_CLKSEL_GFX +pll_div_val4: + .word (GFX_DIV << 0) +pll_div_add5: + .word CM_CLKSEL1_EMU +pll_div_val5: + .word CLSEL1_EMU_VAL + +#endif + +.globl lowlevel_init +lowlevel_init: + ldr sp, SRAM_STACK + str ip, [sp] /* stash old link register */ + mov ip, lr /* save link reg across call */ + bl s_init /* go setup pll,mux,memory */ + ldr ip, [sp] /* restore save ip */ + mov lr, ip /* restore link reg */ + + /* back to arch calling code */ + mov pc, lr + + /* the literal pools origin */ + .ltorg + +REG_CONTROL_STATUS: + .word CONTROL_STATUS +SRAM_STACK: + .word LOW_LEVEL_SRAM_STACK + +/* DPLL(1-4) PARAM TABLES */ +/* Each of the tables has M, N, FREQSEL, M2 values defined for nominal + * OPP (1.2V). The fields are defined according to dpll_param struct(clock.c). + * The values are defined for all possible sysclk and for ES1 and ES2. + */ + +mpu_dpll_param: +/* 12MHz */ +/* ES1 */ +.word 0x0FE,0x07,0x05,0x01 +/* ES2 */ +.word 0x0FA,0x05,0x07,0x01 +/* 3410 */ +.word 0x085,0x05,0x07,0x01 + +/* 13MHz */ +/* ES1 */ +.word 0x17D,0x0C,0x03,0x01 +/* ES2 */ +.word 0x1F4,0x0C,0x03,0x01 +/* 3410 */ +.word 0x10A,0x0C,0x03,0x01 + +/* 19.2MHz */ +/* ES1 */ +.word 0x179,0x12,0x04,0x01 +/* ES2 */ +.word 0x271,0x17,0x03,0x01 +/* 3410 */ +.word 0x14C,0x17,0x03,0x01 + +/* 26MHz */ +/* ES1 */ +.word 0x17D,0x19,0x03,0x01 +/* ES2 */ +.word 0x0FA,0x0C,0x07,0x01 +/* 3410 */ +.word 0x085,0x0C,0x07,0x01 + +/* 38.4MHz */ +/* ES1 */ +.word 0x1FA,0x32,0x03,0x01 +/* ES2 */ +.word 0x271,0x2F,0x03,0x01 +/* 3410 */ +.word 0x14C,0x2F,0x03,0x01 + + +.globl get_mpu_dpll_param +get_mpu_dpll_param: + adr r0, mpu_dpll_param + mov pc, lr + +iva_dpll_param: +/* 12MHz */ +/* ES1 */ +.word 0x07D,0x05,0x07,0x01 +/* ES2 */ +.word 0x0B4,0x05,0x07,0x01 +/* 3410 */ +.word 0x085,0x05,0x07,0x01 + +/* 13MHz */ +/* ES1 */ +.word 0x0FA,0x0C,0x03,0x01 +/* ES2 */ +.word 0x168,0x0C,0x03,0x01 +/* 3410 */ +.word 0x10A,0x0C,0x03,0x01 + +/* 19.2MHz */ +/* ES1 */ +.word 0x082,0x09,0x07,0x01 +/* ES2 */ +.word 0x0E1,0x0B,0x06,0x01 +/* 3410 */ +.word 0x14C,0x17,0x03,0x01 + +/* 26MHz */ +/* ES1 */ +.word 0x07D,0x0C,0x07,0x01 +/* ES2 */ +.word 0x0B4,0x0C,0x07,0x01 +/* 3410 */ +.word 0x085,0x0C,0x07,0x01 + +/* 38.4MHz */ +/* ES1 */ +.word 0x13F,0x30,0x03,0x01 +/* ES2 */ +.word 0x0E1,0x17,0x06,0x01 +/* 3410 */ +.word 0x14C,0x2F,0x03,0x01 + + +.globl get_iva_dpll_param +get_iva_dpll_param: + adr r0, iva_dpll_param + mov pc, lr + +/* Core DPLL targets for L3 at 166 & L133 */ +core_dpll_param: +/* 12MHz */ +/* ES1 */ +.word M_12_ES1,M_12_ES1,FSL_12_ES1,M2_12_ES1 +/* ES2 */ +.word M_12,N_12,FSEL_12,M2_12 +/* 3410 */ +.word M_12,N_12,FSEL_12,M2_12 + +/* 13MHz */ +/* ES1 */ +.word M_13_ES1,N_13_ES1,FSL_13_ES1,M2_13_ES1 +/* ES2 */ +.word M_13,N_13,FSEL_13,M2_13 +/* 3410 */ +.word M_13,N_13,FSEL_13,M2_13 + +/* 19.2MHz */ +/* ES1 */ +.word M_19p2_ES1,N_19p2_ES1,FSL_19p2_ES1,M2_19p2_ES1 +/* ES2 */ +.word M_19p2,N_19p2,FSEL_19p2,M2_19p2 +/* 3410 */ +.word M_19p2,N_19p2,FSEL_19p2,M2_19p2 + +/* 26MHz */ +/* ES1 */ +.word M_26_ES1,N_26_ES1,FSL_26_ES1,M2_26_ES1 +/* ES2 */ +.word M_26,N_26,FSEL_26,M2_26 +/* 3410 */ +.word M_26,N_26,FSEL_26,M2_26 + +/* 38.4MHz */ +/* ES1 */ +.word M_38p4_ES1,N_38p4_ES1,FSL_38p4_ES1,M2_38p4_ES1 +/* ES2 */ +.word M_38p4,N_38p4,FSEL_38p4,M2_38p4 +/* 3410 */ +.word M_38p4,N_38p4,FSEL_38p4,M2_38p4 + +.globl get_core_dpll_param +get_core_dpll_param: + adr r0, core_dpll_param + mov pc, lr + +/* PER DPLL values are same for both ES1 and ES2 */ +per_dpll_param: +/* 12MHz */ +.word 0xD8,0x05,0x07,0x09 + +/* 13MHz */ +.word 0x1B0,0x0C,0x03,0x09 + +/* 19.2MHz */ +.word 0xE1,0x09,0x07,0x09 + +/* 26MHz */ +.word 0xD8,0x0C,0x07,0x09 + +/* 38.4MHz */ +.word 0xE1,0x13,0x07,0x09 + +.globl get_per_dpll_param +get_per_dpll_param: + adr r0, per_dpll_param + mov pc, lr + diff --git a/x-loader/board/omap3530beagle/platform.S_old b/x-loader/board/omap3530beagle/platform.S_old new file mode 100644 index 0000000..8368487 --- /dev/null +++ b/x-loader/board/omap3530beagle/platform.S_old @@ -0,0 +1,435 @@ +/* + * Board specific setup info + * + * (C) Copyright 2004-2006 + * Texas Instruments, <www.ti.com> + * Richard Woodruff <r-woodruff2@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <asm/arch/cpu.h> +#include <asm/arch/mem.h> +#include <asm/arch/clocks.h> + +_TEXT_BASE: + .word TEXT_BASE /* sdram load addr from config.mk */ + +#if !defined(CFG_NAND_BOOT) && !defined(CFG_NAND_BOOT) +/************************************************************************** + * cpy_clk_code: relocates clock code into SRAM where its safer to execute + * R1 = SRAM destination address. + *************************************************************************/ +.global cpy_clk_code + cpy_clk_code: + /* Copy DPLL code into SRAM */ + adr r0, go_to_speed /* get addr of clock setting code */ + mov r2, #384 /* r2 size to copy (div by 32 bytes) */ + mov r1, r1 /* r1 <- dest address (passed in) */ + add r2, r2, r0 /* r2 <- source end address */ +next2: + ldmia r0!, {r3-r10} /* copy from source address [r0] */ + stmia r1!, {r3-r10} /* copy to target address [r1] */ + cmp r0, r2 /* until source end address [r2] */ + bne next2 + mov pc, lr /* back to caller */ + +/* **************************************************************************** + * NOTE: 3430 X-loader currently does not use this code. +* It could be removed its is kept for compatabily with u-boot. + * + * go_to_speed: -Moves to bypass, -Commits clock dividers, -puts dpll at speed + * -executed from SRAM. + * R0 = CM_CLKEN_PLL-bypass value + * R1 = CM_CLKSEL1_PLL-m, n, and divider values + * R2 = CM_CLKSEL_CORE-divider values + * R3 = CM_IDLEST_CKGEN - addr dpll lock wait + * + * Note: If core unlocks/relocks and SDRAM is running fast already it gets + * confused. A reset of the controller gets it back. Taking away its + * L3 when its not in self refresh seems bad for it. Normally, this code + * runs from flash before SDR is init so that should be ok. + ******************************************************************************/ +.global go_to_speed + go_to_speed: + stmfd sp!, {r4-r6} + + /* move into fast relock bypass */ + ldr r4, pll_ctl_add + str r0, [r4] +wait1: + ldr r5, [r3] /* get status */ + and r5, r5, #0x1 /* isolate core status */ + cmp r5, #0x1 /* still locked? */ + beq wait1 /* if lock, loop */ + + /* set new dpll dividers _after_ in bypass */ + ldr r5, pll_div_add1 + str r1, [r5] /* set m, n, m2 */ + ldr r5, pll_div_add2 + str r2, [r5] /* set l3/l4/.. dividers*/ + ldr r5, pll_div_add3 /* wkup */ + ldr r2, pll_div_val3 /* rsm val */ + str r2, [r5] + ldr r5, pll_div_add4 /* gfx */ + ldr r2, pll_div_val4 + str r2, [r5] + ldr r5, pll_div_add5 /* emu */ + ldr r2, pll_div_val5 + str r2, [r5] + + /* now prepare GPMC (flash) for new dpll speed */ + /* flash needs to be stable when we jump back to it */ + ldr r5, flash_cfg3_addr + ldr r2, flash_cfg3_val + str r2, [r5] + ldr r5, flash_cfg4_addr + ldr r2, flash_cfg4_val + str r2, [r5] + ldr r5, flash_cfg5_addr + ldr r2, flash_cfg5_val + str r2, [r5] + ldr r5, flash_cfg1_addr + ldr r2, [r5] + orr r2, r2, #0x3 /* up gpmc divider */ + str r2, [r5] + + /* lock DPLL3 and wait a bit */ + orr r0, r0, #0x7 /* set up for lock mode */ + str r0, [r4] /* lock */ + nop /* ARM slow at this point working at sys_clk */ + nop + nop + nop +wait2: + ldr r5, [r3] /* get status */ + and r5, r5, #0x1 /* isolate core status */ + cmp r5, #0x1 /* still locked? */ + bne wait2 /* if lock, loop */ + nop + nop + nop + nop + ldmfd sp!, {r4-r6} + mov pc, lr /* back to caller, locked */ + +_go_to_speed: .word go_to_speed + +/* these constants need to be close for PIC code */ +/* The Nor has to be in the Flash Base CS0 for this condition to happen */ +flash_cfg1_addr: + .word (GPMC_CONFIG_CS0 + GPMC_CONFIG1) +flash_cfg3_addr: + .word (GPMC_CONFIG_CS0 + GPMC_CONFIG3) +flash_cfg3_val: + .word STNOR_GPMC_CONFIG3 +flash_cfg4_addr: + .word (GPMC_CONFIG_CS0 + GPMC_CONFIG4) +flash_cfg4_val: + .word STNOR_GPMC_CONFIG4 +flash_cfg5_val: + .word STNOR_GPMC_CONFIG5 +flash_cfg5_addr: + .word (GPMC_CONFIG_CS0 + GPMC_CONFIG5) +pll_ctl_add: + .word CM_CLKEN_PLL +pll_div_add1: + .word CM_CLKSEL1_PLL +pll_div_add2: + .word CM_CLKSEL_CORE +pll_div_add3: + .word CM_CLKSEL_WKUP +pll_div_val3: + .word (WKUP_RSM << 1) +pll_div_add4: + .word CM_CLKSEL_GFX +pll_div_val4: + .word (GFX_DIV << 0) +pll_div_add5: + .word CM_CLKSEL1_EMU +pll_div_val5: + .word CLSEL1_EMU_VAL + +#endif + +.globl lowlevel_init +lowlevel_init: + ldr sp, SRAM_STACK + str ip, [sp] /* stash old link register */ + mov ip, lr /* save link reg across call */ + bl s_init /* go setup pll,mux,memory */ + ldr ip, [sp] /* restore save ip */ + mov lr, ip /* restore link reg */ + + /* back to arch calling code */ + mov pc, lr + + /* the literal pools origin */ + .ltorg + +REG_CONTROL_STATUS: + .word CONTROL_STATUS +SRAM_STACK: + .word LOW_LEVEL_SRAM_STACK + + +/* DPLL(1-4) PARAM TABLES */ +/* Each of the tables has M, N, FREQSEL, M2 values defined for nominal + * OPP (1.2V). The fields are defined according to dpll_param struct(clock.c). + * The values are defined for all possible sysclk and for ES1 and ES2. + */ + +mpu_dpll_param: +/* 12MHz */ +/* ES1 */ +.word 0x0FE +.word 0x07 +.word 0x05 +.word 0x01 +/* ES2 */ +.word 0x0FA +.word 0x05 +.word 0x07 +.word 0x01 + +/* 13MHz */ +/* ES1 */ +.word 0x17D +.word 0x0C +.word 0x03 +.word 0x01 +/* ES2 */ +.word 0x1F4 +.word 0x0C +.word 0x03 +.word 0x01 + +/* 19.2MHz */ +/* ES1 */ +.word 0x179 +.word 0x12 +.word 0x04 +.word 0x01 +/* ES2 */ +.word 0x271 +.word 0x17 +.word 0x03 +.word 0x01 + +/* 26MHz */ +/* ES1 */ +.word 0x17D +.word 0x19 +.word 0x03 +.word 0x01 +/* ES2 */ +.word 0x0FA +.word 0x0C +.word 0x07 +.word 0x01 + +/* 38.4MHz */ +/* ES1 */ +.word 0x1FA +.word 0x32 +.word 0x03 +.word 0x01 +/* ES2 */ +.word 0x271 +.word 0x2F +.word 0x03 +.word 0x01 + + +.globl get_mpu_dpll_param +get_mpu_dpll_param: + adr r0, mpu_dpll_param + mov pc, lr + +iva_dpll_param: +/* 12MHz */ +/* ES1 */ +.word 0x07D +.word 0x05 +.word 0x07 +.word 0x01 +/* ES2 */ +.word 0x0B4 +.word 0x05 +.word 0x07 +.word 0x01 + +/* 13MHz */ +/* ES1 */ +.word 0x0FA +.word 0x0C +.word 0x03 +.word 0x01 +/* ES2 */ +.word 0x168 +.word 0x0C +.word 0x03 +.word 0x01 + +/* 19.2MHz */ +/* ES1 */ +.word 0x082 +.word 0x09 +.word 0x07 +.word 0x01 +/* ES2 */ +.word 0x0E1 +.word 0x0B +.word 0x06 +.word 0x01 + +/* 26MHz */ +/* ES1 */ +.word 0x07D +.word 0x0C +.word 0x07 +.word 0x01 +/* ES2 */ +.word 0x0B4 +.word 0x0C +.word 0x07 +.word 0x01 + +/* 38.4MHz */ +/* ES1 */ +.word 0x13F +.word 0x30 +.word 0x03 +.word 0x01 +/* ES2 */ +.word 0x0E1 +.word 0x17 +.word 0x06 +.word 0x01 + + +.globl get_iva_dpll_param +get_iva_dpll_param: + adr r0, iva_dpll_param + mov pc, lr + +core_dpll_param: +/* 12MHz */ +/* ES1 */ +.word 0x19F +.word 0x0E +.word 0x03 +.word 0x01 +/* ES2 */ +.word 0x0A6 +.word 0x05 +.word 0x07 +.word 0x01 + +/* 13MHz */ +/* ES1 */ +.word 0x1B2 +.word 0x10 +.word 0x03 +.word 0x01 +/* ES2 */ +.word 0x14C +.word 0x0C +.word 0x03 +.word 0x01 + +/* 19.2MHz */ +/* ES1 */ +.word 0x19F +.word 0x17 +.word 0x03 +.word 0x01 +/* ES2 */ +.word 0x19F +.word 0x17 +.word 0x03 +.word 0x01 + +/* 26MHz */ +/* ES1 */ +.word 0x1B2 +.word 0x21 +.word 0x03 +.word 0x01 +/* ES2 */ +.word 0x0A6 +.word 0x0C +.word 0x07 +.word 0x01 + +/* 38.4MHz */ +/* ES1 */ +.word 0x19F +.word 0x2F +.word 0x03 +.word 0x01 +/* ES2 */ +.word 0x19F +.word 0x2F +.word 0x03 +.word 0x01 + +.globl get_core_dpll_param +get_core_dpll_param: + adr r0, core_dpll_param + mov pc, lr + +/* PER DPLL values are same for both ES1 and ES2 */ +per_dpll_param: +/* 12MHz */ +.word 0xD8 +.word 0x05 +.word 0x07 +.word 0x09 + +/* 13MHz */ +.word 0x1B0 +.word 0x0C +.word 0x03 +.word 0x09 + +/* 19.2MHz */ +.word 0xE1 +.word 0x09 +.word 0x07 +.word 0x09 + +/* 26MHz */ +.word 0xD8 +.word 0x0C +.word 0x07 +.word 0x09 + +/* 38.4MHz */ +.word 0xE1 +.word 0x13 +.word 0x07 +.word 0x09 + +.globl get_per_dpll_param +get_per_dpll_param: + adr r0, per_dpll_param + mov pc, lr + diff --git a/x-loader/board/omap3530beagle/x-load.lds b/x-loader/board/omap3530beagle/x-load.lds new file mode 100644 index 0000000..9402f74 --- /dev/null +++ b/x-loader/board/omap3530beagle/x-load.lds @@ -0,0 +1,54 @@ +/* + * November 2006 - Changed to support 3430sdp device + * Copyright (c) 2004-2006 Texas Instruments + * + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, <gj@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + . = 0x00000000; + + . = ALIGN(4); + .text : + { + cpu/omap3/start.o (.text) + *(.text) + } + + . = ALIGN(4); + .rodata : { *(.rodata) } + + . = ALIGN(4); + .data : { *(.data) } + + . = ALIGN(4); + .got : { *(.got) } + + . = ALIGN(4); + __bss_start = .; + .bss : { *(.bss) } + _end = .; +} diff --git a/x-loader/board/omap3evm/Makefile b/x-loader/board/omap3evm/Makefile new file mode 100644 index 0000000..2a0ec64 --- /dev/null +++ b/x-loader/board/omap3evm/Makefile @@ -0,0 +1,47 @@ +# +# (C) Copyright 2000, 2001, 2002 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = lib$(BOARD).a + +OBJS := omap3evm.o +SOBJS := platform.o + +$(LIB): $(OBJS) $(SOBJS) + $(AR) crv $@ $^ + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) + $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ + +-include .depend + +######################################################################### diff --git a/x-loader/board/omap3evm/config.mk b/x-loader/board/omap3evm/config.mk new file mode 100644 index 0000000..a45ec22 --- /dev/null +++ b/x-loader/board/omap3evm/config.mk @@ -0,0 +1,19 @@ +# (C) Copyright 2006 +# Texas Instruments, <www.ti.com> +# +# OMAP3EVM board uses OMAP3430 (ARM-CortexA8) cpu +# see http://www.ti.com/ for more information on Texas Instruments# +# +# OMAP3EVM has 1 bank of 128MB mPOP-SDRAM on CS0 +# Physical Address: +# 8000'0000 (bank0) + +# For use if you want X-Loader to relocate from SRAM to DDR +#TEXT_BASE = 0x80e80000 + +# For XIP in 64K of SRAM or debug (GP device has it all availabe) +# SRAM 40200000-4020FFFF base +# initial stack at 0x4020fffc used in s_init (below xloader). +# The run time stack is (above xloader, 2k below) +# If any globals exist there needs to be room for them also +TEXT_BASE = 0x40200800 diff --git a/x-loader/board/omap3evm/omap3evm.c b/x-loader/board/omap3evm/omap3evm.c new file mode 100644 index 0000000..20b4a88 --- /dev/null +++ b/x-loader/board/omap3evm/omap3evm.c @@ -0,0 +1,814 @@ +/* + * (C) Copyright 2006 + * Texas Instruments, <www.ti.com> + * Jian Zhang <jzhang@ti.com> + * Richard Woodruff <r-woodruff2@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <common.h> +#include <command.h> +#include <part.h> +#include <fat.h> +#include <asm/arch/cpu.h> +#include <asm/arch/bits.h> +#include <asm/arch/mux.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/sys_info.h> +#include <asm/arch/clocks.h> +#include <asm/arch/mem.h> + +/* Used to index into DPLL parameter tables */ +struct dpll_param { + unsigned int m; + unsigned int n; + unsigned int fsel; + unsigned int m2; +}; + +typedef struct dpll_param dpll_param; + +/* Following functions are exported from lowlevel_init.S */ +extern dpll_param * get_mpu_dpll_param(); +extern dpll_param * get_iva_dpll_param(); +extern dpll_param * get_core_dpll_param(); +extern dpll_param * get_per_dpll_param(); + +#define __raw_readl(a) (*(volatile unsigned int *)(a)) +#define __raw_writel(v,a) (*(volatile unsigned int *)(a) = (v)) +#define __raw_readw(a) (*(volatile unsigned short *)(a)) +#define __raw_writew(v,a) (*(volatile unsigned short *)(a) = (v)) + +/******************************************************* + * Routine: delay + * Description: spinning delay to use before udelay works + ******************************************************/ +static inline void delay(unsigned long loops) +{ + __asm__ volatile ("1:\n" "subs %0, %1, #1\n" + "bne 1b":"=r" (loops):"0"(loops)); +} + +void udelay (unsigned long usecs) { + delay(usecs); +} + +/***************************************** + * Routine: board_init + * Description: Early hardware init. + *****************************************/ +int board_init (void) +{ + return 0; +} + +/************************************************************* + * get_device_type(): tell if GP/HS/EMU/TST + *************************************************************/ +u32 get_device_type(void) +{ + int mode; + mode = __raw_readl(CONTROL_STATUS) & (DEVICE_MASK); + return(mode >>= 8); +} + +/************************************************ + * get_sysboot_value(void) - return SYS_BOOT[4:0] + ************************************************/ +u32 get_sysboot_value(void) +{ + int mode; + mode = __raw_readl(CONTROL_STATUS) & (SYSBOOT_MASK); + return mode; +} +/************************************************************* + * Routine: get_mem_type(void) - returns the kind of memory connected + * to GPMC that we are trying to boot form. Uses SYS BOOT settings. + *************************************************************/ +u32 get_mem_type(void) +{ + u32 mem_type = get_sysboot_value(); + switch (mem_type){ + case 0: + case 2: + case 4: + case 16: + case 22: return GPMC_ONENAND; + + case 1: + case 12: + case 15: + case 21: + case 27: return GPMC_NAND; + + case 3: + case 6: return MMC_ONENAND; + + case 8: + case 11: + case 14: + case 20: + case 26: return GPMC_MDOC; + + case 17: + case 18: + case 24: return MMC_NAND; + + case 7: + case 10: + case 13: + case 19: + case 25: + default: return GPMC_NOR; + } +} + +/****************************************** + * get_cpu_rev(void) - extract version info + ******************************************/ +u32 get_cpu_rev(void) +{ + u32 cpuid=0; + /* On ES1.0 the IDCODE register is not exposed on L4 + * so using CPU ID to differentiate + * between ES2.0 and ES1.0. + */ + __asm__ __volatile__("mrc p15, 0, %0, c0, c0, 0":"=r" (cpuid)); + if((cpuid & 0xf) == 0x0) + return CPU_3430_ES1; + else + return CPU_3430_ES2; + +} + +/****************************************** + * cpu_is_3410(void) - returns true for 3410 + ******************************************/ +u32 cpu_is_3410(void) +{ + int status; + if(get_cpu_rev() < CPU_3430_ES2) { + return 0; + } else { + /* read scalability status and return 1 for 3410*/ + status = __raw_readl(CONTROL_SCALABLE_OMAP_STATUS); + /* Check whether MPU frequency is set to 266 MHz which + * is nominal for 3410. If yes return true else false + */ + if (((status >> 8) & 0x3) == 0x2) + return 1; + else + return 0; + } +} + +/***************************************************************** + * sr32 - clear & set a value in a bit range for a 32 bit address + *****************************************************************/ +void sr32(u32 addr, u32 start_bit, u32 num_bits, u32 value) +{ + u32 tmp, msk = 0; + msk = 1 << num_bits; + --msk; + tmp = __raw_readl(addr) & ~(msk << start_bit); + tmp |= value << start_bit; + __raw_writel(tmp, addr); +} + +/********************************************************************* + * wait_on_value() - common routine to allow waiting for changes in + * volatile regs. + *********************************************************************/ +u32 wait_on_value(u32 read_bit_mask, u32 match_value, u32 read_addr, u32 bound) +{ + u32 i = 0, val; + do { + ++i; + val = __raw_readl(read_addr) & read_bit_mask; + if (val == match_value) + return (1); + if (i == bound) + return (0); + } while (1); +} + +#ifdef CFG_3430SDRAM_DDR +/********************************************************************* + * config_3430sdram_ddr() - Init DDR on 3430SDP dev board. + *********************************************************************/ +void config_3430sdram_ddr(void) +{ + /* reset sdrc controller */ + __raw_writel(SOFTRESET, SDRC_SYSCONFIG); + wait_on_value(BIT0, BIT0, SDRC_STATUS, 12000000); + __raw_writel(0, SDRC_SYSCONFIG); + + /* setup sdrc to ball mux */ + __raw_writel(SDP_SDRC_SHARING, SDRC_SHARING); + + /* set mdcfg */ + __raw_writel(SDP_SDRC_MDCFG_0_DDR, SDRC_MCFG_0); + + /* set timing */ + if ((get_mem_type() == GPMC_ONENAND) || (get_mem_type() == MMC_ONENAND)){ + __raw_writel(INFINEON_SDRC_ACTIM_CTRLA_0, SDRC_ACTIM_CTRLA_0); + __raw_writel(INFINEON_SDRC_ACTIM_CTRLB_0, SDRC_ACTIM_CTRLB_0); + } + if ((get_mem_type() == GPMC_NAND) ||(get_mem_type() == MMC_NAND)){ + __raw_writel(MICRON_SDRC_ACTIM_CTRLA_0, SDRC_ACTIM_CTRLA_0); + __raw_writel(MICRON_SDRC_ACTIM_CTRLB_0, SDRC_ACTIM_CTRLB_0); + } + + __raw_writel(SDP_SDRC_RFR_CTRL, SDRC_RFR_CTRL); + __raw_writel(SDP_SDRC_POWER_POP, SDRC_POWER); + + /* init sequence for mDDR/mSDR using manual commands (DDR is different) */ + __raw_writel(CMD_NOP, SDRC_MANUAL_0); + delay(5000); + __raw_writel(CMD_PRECHARGE, SDRC_MANUAL_0); + __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_0); + __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_0); + + /* set mr0 */ + __raw_writel(SDP_SDRC_MR_0_DDR, SDRC_MR_0); + + /* set up dll */ + __raw_writel(SDP_SDRC_DLLAB_CTRL, SDRC_DLLA_CTRL); + delay(0x2000); /* give time to lock */ + +} +#endif // CFG_3430SDRAM_DDR + +/************************************************************* + * get_sys_clk_speed - determine reference oscillator speed + * based on known 32kHz clock and gptimer. + *************************************************************/ +u32 get_osc_clk_speed(void) +{ + u32 start, cstart, cend, cdiff, val; + + val = __raw_readl(PRM_CLKSRC_CTRL); + /* If SYS_CLK is being divided by 2, remove for now */ + val = (val & (~BIT7)) | BIT6; + __raw_writel(val, PRM_CLKSRC_CTRL); + + /* enable timer2 */ + val = __raw_readl(CM_CLKSEL_WKUP) | BIT0; + __raw_writel(val, CM_CLKSEL_WKUP); /* select sys_clk for GPT1 */ + + /* Enable I and F Clocks for GPT1 */ + val = __raw_readl(CM_ICLKEN_WKUP) | BIT0 | BIT2; + __raw_writel(val, CM_ICLKEN_WKUP); + val = __raw_readl(CM_FCLKEN_WKUP) | BIT0; + __raw_writel(val, CM_FCLKEN_WKUP); + + __raw_writel(0, OMAP34XX_GPT1 + TLDR); /* start counting at 0 */ + __raw_writel(GPT_EN, OMAP34XX_GPT1 + TCLR); /* enable clock */ + /* enable 32kHz source *//* enabled out of reset */ + /* determine sys_clk via gauging */ + + start = 20 + __raw_readl(S32K_CR); /* start time in 20 cycles */ + while (__raw_readl(S32K_CR) < start); /* dead loop till start time */ + cstart = __raw_readl(OMAP34XX_GPT1 + TCRR); /* get start sys_clk count */ + while (__raw_readl(S32K_CR) < (start + 20)); /* wait for 40 cycles */ + cend = __raw_readl(OMAP34XX_GPT1 + TCRR); /* get end sys_clk count */ + cdiff = cend - cstart; /* get elapsed ticks */ + + /* based on number of ticks assign speed */ + if (cdiff > 19000) + return (S38_4M); + else if (cdiff > 15200) + return (S26M); + else if (cdiff > 13000) + return (S24M); + else if (cdiff > 9000) + return (S19_2M); + else if (cdiff > 7600) + return (S13M); + else + return (S12M); +} + +/****************************************************************************** + * get_sys_clkin_sel() - returns the sys_clkin_sel field value based on + * -- input oscillator clock frequency. + * + *****************************************************************************/ +void get_sys_clkin_sel(u32 osc_clk, u32 *sys_clkin_sel) +{ + if(osc_clk == S38_4M) + *sys_clkin_sel= 4; + else if(osc_clk == S26M) + *sys_clkin_sel = 3; + else if(osc_clk == S19_2M) + *sys_clkin_sel = 2; + else if(osc_clk == S13M) + *sys_clkin_sel = 1; + else if(osc_clk == S12M) + *sys_clkin_sel = 0; +} + +/****************************************************************************** + * prcm_init() - inits clocks for PRCM as defined in clocks.h + * -- called from SRAM, or Flash (using temp SRAM stack). + *****************************************************************************/ +void prcm_init(void) +{ + u32 osc_clk=0, sys_clkin_sel; + dpll_param *dpll_param_p; + u32 clk_index, sil_index; + + /* Gauge the input clock speed and find out the sys_clkin_sel + * value corresponding to the input clock. + */ + osc_clk = get_osc_clk_speed(); + get_sys_clkin_sel(osc_clk, &sys_clkin_sel); + + sr32(PRM_CLKSEL, 0, 3, sys_clkin_sel); /* set input crystal speed */ + + /* If the input clock is greater than 19.2M always divide/2 */ + if(sys_clkin_sel > 2) { + sr32(PRM_CLKSRC_CTRL, 6, 2, 2);/* input clock divider */ + clk_index = sys_clkin_sel/2; + } else { + sr32(PRM_CLKSRC_CTRL, 6, 2, 1);/* input clock divider */ + clk_index = sys_clkin_sel; + } + + /* The DPLL tables are defined according to sysclk value and + * silicon revision. The clk_index value will be used to get + * the values for that input sysclk from the DPLL param table + * and sil_index will get the values for that SysClk for the + * appropriate silicon rev. + */ + sil_index = get_cpu_rev() - 1; + + /* Unlock MPU DPLL (slows things down, and needed later) */ + sr32(CM_CLKEN_PLL_MPU, 0, 3, PLL_LOW_POWER_BYPASS); + wait_on_value(BIT0, 0, CM_IDLEST_PLL_MPU, LDELAY); + + /* Getting the base address of Core DPLL param table*/ + dpll_param_p = (dpll_param *)get_core_dpll_param(); + /* Moving it to the right sysclk and ES rev base */ + dpll_param_p = dpll_param_p + 2*clk_index + sil_index; + /* CORE DPLL */ + /* sr32(CM_CLKSEL2_EMU) set override to work when asleep */ + sr32(CM_CLKEN_PLL, 0, 3, PLL_FAST_RELOCK_BYPASS); + wait_on_value(BIT0, 0, CM_IDLEST_CKGEN, LDELAY); + sr32(CM_CLKSEL1_EMU, 16, 5, CORE_M3X2); /* m3x2 */ + sr32(CM_CLKSEL1_PLL, 27, 2, dpll_param_p->m2); /* Set M2 */ + sr32(CM_CLKSEL1_PLL, 16, 11, dpll_param_p->m); /* Set M */ + sr32(CM_CLKSEL1_PLL, 8, 7, dpll_param_p->n); /* Set N */ + sr32(CM_CLKSEL1_PLL, 6, 1, 0); /* 96M Src */ + sr32(CM_CLKSEL_CORE, 8, 4, CORE_SSI_DIV); /* ssi */ + sr32(CM_CLKSEL_CORE, 4, 2, CORE_FUSB_DIV); /* fsusb */ + sr32(CM_CLKSEL_CORE, 2, 2, CORE_L4_DIV); /* l4 */ + sr32(CM_CLKSEL_CORE, 0, 2, CORE_L3_DIV); /* l3 */ + sr32(CM_CLKSEL_GFX, 0, 3, GFX_DIV); /* gfx */ + sr32(CM_CLKSEL_WKUP, 1, 2, WKUP_RSM); /* reset mgr */ + sr32(CM_CLKEN_PLL, 4, 4, dpll_param_p->fsel); /* FREQSEL */ + sr32(CM_CLKEN_PLL, 0, 3, PLL_LOCK); /* lock mode */ + wait_on_value(BIT0, 1, CM_IDLEST_CKGEN, LDELAY); + + /* Getting the base address to PER DPLL param table*/ + dpll_param_p = (dpll_param *)get_per_dpll_param(); + /* Moving it to the right sysclk base */ + dpll_param_p = dpll_param_p + clk_index; + /* PER DPLL */ + sr32(CM_CLKEN_PLL, 16, 3, PLL_STOP); + wait_on_value(BIT1, 0, CM_IDLEST_CKGEN, LDELAY); + sr32(CM_CLKSEL1_EMU, 24, 5, PER_M6X2); /* set M6 */ + sr32(CM_CLKSEL_CAM, 0, 5, PER_M5X2); /* set M5 */ + sr32(CM_CLKSEL_DSS, 0, 5, PER_M4X2); /* set M4 */ + sr32(CM_CLKSEL_DSS, 8, 5, PER_M3X2); /* set M3 */ + sr32(CM_CLKSEL3_PLL, 0, 5, dpll_param_p->m2); /* set M2 */ + sr32(CM_CLKSEL2_PLL, 8, 11, dpll_param_p->m); /* set m */ + sr32(CM_CLKSEL2_PLL, 0, 7, dpll_param_p->n); /* set n */ + sr32(CM_CLKEN_PLL, 20, 4, dpll_param_p->fsel);/* FREQSEL */ + sr32(CM_CLKEN_PLL, 16, 3, PLL_LOCK); /* lock mode */ + wait_on_value(BIT1, 2, CM_IDLEST_CKGEN, LDELAY); + + /* Getting the base address to MPU DPLL param table*/ + dpll_param_p = (dpll_param *)get_mpu_dpll_param(); + /* Moving it to the right sysclk and ES rev base */ + dpll_param_p = dpll_param_p + 2*clk_index + sil_index; + /* MPU DPLL (unlocked already) */ + sr32(CM_CLKSEL2_PLL_MPU, 0, 5, dpll_param_p->m2); /* Set M2 */ + sr32(CM_CLKSEL1_PLL_MPU, 8, 11, dpll_param_p->m); /* Set M */ + sr32(CM_CLKSEL1_PLL_MPU, 0, 7, dpll_param_p->n); /* Set N */ + sr32(CM_CLKEN_PLL_MPU, 4, 4, dpll_param_p->fsel); /* FREQSEL */ + sr32(CM_CLKEN_PLL_MPU, 0, 3, PLL_LOCK); /* lock mode */ + wait_on_value(BIT0, 1, CM_IDLEST_PLL_MPU, LDELAY); + + /* Getting the base address to IVA DPLL param table*/ + dpll_param_p = (dpll_param *)get_iva_dpll_param(); + /* Moving it to the right sysclk and ES rev base */ + dpll_param_p = dpll_param_p + 2*clk_index + sil_index; + /* IVA DPLL (set to 12*20=240MHz) */ + sr32(CM_CLKEN_PLL_IVA2, 0, 3, PLL_STOP); + wait_on_value(BIT0, 0, CM_IDLEST_PLL_IVA2, LDELAY); + sr32(CM_CLKSEL2_PLL_IVA2, 0, 5, dpll_param_p->m2); /* set M2 */ + sr32(CM_CLKSEL1_PLL_IVA2, 8, 11, dpll_param_p->m); /* set M */ + sr32(CM_CLKSEL1_PLL_IVA2, 0, 7, dpll_param_p->n); /* set N */ + sr32(CM_CLKEN_PLL_IVA2, 4, 4, dpll_param_p->fsel); /* FREQSEL */ + sr32(CM_CLKEN_PLL_IVA2, 0, 3, PLL_LOCK); /* lock mode */ + wait_on_value(BIT0, 1, CM_IDLEST_PLL_IVA2, LDELAY); + + /* Set up GPTimers to sys_clk source only */ + sr32(CM_CLKSEL_PER, 0, 8, 0xff); + sr32(CM_CLKSEL_WKUP, 0, 1, 1); + + delay(5000); +} + +/***************************************** + * Routine: secure_unlock + * Description: Setup security registers for access + * (GP Device only) + *****************************************/ +void secure_unlock(void) +{ + /* Permission values for registers -Full fledged permissions to all */ + #define UNLOCK_1 0xFFFFFFFF + #define UNLOCK_2 0x00000000 + #define UNLOCK_3 0x0000FFFF + /* Protection Module Register Target APE (PM_RT)*/ + __raw_writel(UNLOCK_1, RT_REQ_INFO_PERMISSION_1); + __raw_writel(UNLOCK_1, RT_READ_PERMISSION_0); + __raw_writel(UNLOCK_1, RT_WRITE_PERMISSION_0); + __raw_writel(UNLOCK_2, RT_ADDR_MATCH_1); + + __raw_writel(UNLOCK_3, GPMC_REQ_INFO_PERMISSION_0); + __raw_writel(UNLOCK_3, GPMC_READ_PERMISSION_0); + __raw_writel(UNLOCK_3, GPMC_WRITE_PERMISSION_0); + + __raw_writel(UNLOCK_3, OCM_REQ_INFO_PERMISSION_0); + __raw_writel(UNLOCK_3, OCM_READ_PERMISSION_0); + __raw_writel(UNLOCK_3, OCM_WRITE_PERMISSION_0); + __raw_writel(UNLOCK_2, OCM_ADDR_MATCH_2); + + /* IVA Changes */ + __raw_writel(UNLOCK_3, IVA2_REQ_INFO_PERMISSION_0); + __raw_writel(UNLOCK_3, IVA2_READ_PERMISSION_0); + __raw_writel(UNLOCK_3, IVA2_WRITE_PERMISSION_0); + + __raw_writel(UNLOCK_1, SMS_RG_ATT0); /* SDRC region 0 public */ +} + +/********************************************************** + * Routine: try_unlock_sram() + * Description: If chip is GP type, unlock the SRAM for + * general use. + ***********************************************************/ +void try_unlock_memory(void) +{ + int mode; + + /* if GP device unlock device SRAM for general use */ + /* secure code breaks for Secure/Emulation device - HS/E/T*/ + mode = get_device_type(); + if (mode == GP_DEVICE) { + secure_unlock(); + } + return; +} + +/********************************************************** + * Routine: s_init + * Description: Does early system init of muxing and clocks. + * - Called at time when only stack is available. + **********************************************************/ + +void s_init(void) +{ + watchdog_init(); +#ifdef CONFIG_3430_AS_3410 + /* setup the scalability control register for + * 3430 to work in 3410 mode + */ + __raw_writel(0x5ABF,CONTROL_SCALABLE_OMAP_OCP); +#endif + try_unlock_memory(); + set_muxconf_regs(); + delay(100); + prcm_init(); + per_clocks_enable(); + config_3430sdram_ddr(); +} + +/******************************************************* + * Routine: misc_init_r + * Description: Init ethernet (done here so udelay works) + ********************************************************/ +int misc_init_r (void) +{ + return(0); +} + +/****************************************************** + * Routine: wait_for_command_complete + * Description: Wait for posting to finish on watchdog + ******************************************************/ +void wait_for_command_complete(unsigned int wd_base) +{ + int pending = 1; + do { + pending = __raw_readl(wd_base + WWPS); + } while (pending); +} + +/**************************************** + * Routine: watchdog_init + * Description: Shut down watch dogs + *****************************************/ +void watchdog_init(void) +{ + /* There are 3 watch dogs WD1=Secure, WD2=MPU, WD3=IVA. WD1 is + * either taken care of by ROM (HS/EMU) or not accessible (GP). + * We need to take care of WD2-MPU or take a PRCM reset. WD3 + * should not be running and does not generate a PRCM reset. + */ + sr32(CM_FCLKEN_WKUP, 5, 1, 1); + sr32(CM_ICLKEN_WKUP, 5, 1, 1); + wait_on_value(BIT5, 0x20, CM_IDLEST_WKUP, 5); /* some issue here */ + + __raw_writel(WD_UNLOCK1, WD2_BASE + WSPR); + wait_for_command_complete(WD2_BASE); + __raw_writel(WD_UNLOCK2, WD2_BASE + WSPR); +} + +/********************************************** + * Routine: dram_init + * Description: sets uboots idea of sdram size + **********************************************/ +int dram_init (void) +{ + return 0; +} + +/***************************************************************** + * Routine: peripheral_enable + * Description: Enable the clks & power for perifs (GPT2, UART1,...) + ******************************************************************/ +void per_clocks_enable(void) +{ + /* Enable GP2 timer. */ + sr32(CM_CLKSEL_PER, 0, 1, 0x1); /* GPT2 = sys clk */ + sr32(CM_ICLKEN_PER, 3, 1, 0x1); /* ICKen GPT2 */ + sr32(CM_FCLKEN_PER, 3, 1, 0x1); /* FCKen GPT2 */ + +#ifdef CFG_NS16550 + /* Enable UART1 clocks */ + sr32(CM_FCLKEN1_CORE, 13, 1, 0x1); + sr32(CM_ICLKEN1_CORE, 13, 1, 0x1); +#endif + delay(1000); +} + +/* Set MUX for UART, GPMC, SDRC, GPIO */ + +#define MUX_VAL(OFFSET,VALUE)\ + __raw_writew((VALUE), OMAP34XX_CTRL_BASE + (OFFSET)); + +#define CP(x) (CONTROL_PADCONF_##x) +/* + * IEN - Input Enable + * IDIS - Input Disable + * PTD - Pull type Down + * PTU - Pull type Up + * DIS - Pull type selection is inactive + * EN - Pull type selection is active + * M0 - Mode 0 + * The commented string gives the final mux configuration for that pin + */ +#define MUX_DEFAULT()\ + MUX_VAL(CP(SDRC_D0), (IEN | PTD | DIS | M0)) /*SDRC_D0*/\ + MUX_VAL(CP(SDRC_D1), (IEN | PTD | DIS | M0)) /*SDRC_D1*/\ + MUX_VAL(CP(SDRC_D2), (IEN | PTD | DIS | M0)) /*SDRC_D2*/\ + MUX_VAL(CP(SDRC_D3), (IEN | PTD | DIS | M0)) /*SDRC_D3*/\ + MUX_VAL(CP(SDRC_D4), (IEN | PTD | DIS | M0)) /*SDRC_D4*/\ + MUX_VAL(CP(SDRC_D5), (IEN | PTD | DIS | M0)) /*SDRC_D5*/\ + MUX_VAL(CP(SDRC_D6), (IEN | PTD | DIS | M0)) /*SDRC_D6*/\ + MUX_VAL(CP(SDRC_D7), (IEN | PTD | DIS | M0)) /*SDRC_D7*/\ + MUX_VAL(CP(SDRC_D8), (IEN | PTD | DIS | M0)) /*SDRC_D8*/\ + MUX_VAL(CP(SDRC_D9), (IEN | PTD | DIS | M0)) /*SDRC_D9*/\ + MUX_VAL(CP(SDRC_D10), (IEN | PTD | DIS | M0)) /*SDRC_D10*/\ + MUX_VAL(CP(SDRC_D11), (IEN | PTD | DIS | M0)) /*SDRC_D11*/\ + MUX_VAL(CP(SDRC_D12), (IEN | PTD | DIS | M0)) /*SDRC_D12*/\ + MUX_VAL(CP(SDRC_D13), (IEN | PTD | DIS | M0)) /*SDRC_D13*/\ + MUX_VAL(CP(SDRC_D14), (IEN | PTD | DIS | M0)) /*SDRC_D14*/\ + MUX_VAL(CP(SDRC_D15), (IEN | PTD | DIS | M0)) /*SDRC_D15*/\ + MUX_VAL(CP(SDRC_D16), (IEN | PTD | DIS | M0)) /*SDRC_D16*/\ + MUX_VAL(CP(SDRC_D17), (IEN | PTD | DIS | M0)) /*SDRC_D17*/\ + MUX_VAL(CP(SDRC_D18), (IEN | PTD | DIS | M0)) /*SDRC_D18*/\ + MUX_VAL(CP(SDRC_D19), (IEN | PTD | DIS | M0)) /*SDRC_D19*/\ + MUX_VAL(CP(SDRC_D20), (IEN | PTD | DIS | M0)) /*SDRC_D20*/\ + MUX_VAL(CP(SDRC_D21), (IEN | PTD | DIS | M0)) /*SDRC_D21*/\ + MUX_VAL(CP(SDRC_D22), (IEN | PTD | DIS | M0)) /*SDRC_D22*/\ + MUX_VAL(CP(SDRC_D23), (IEN | PTD | DIS | M0)) /*SDRC_D23*/\ + MUX_VAL(CP(SDRC_D24), (IEN | PTD | DIS | M0)) /*SDRC_D24*/\ + MUX_VAL(CP(SDRC_D25), (IEN | PTD | DIS | M0)) /*SDRC_D25*/\ + MUX_VAL(CP(SDRC_D26), (IEN | PTD | DIS | M0)) /*SDRC_D26*/\ + MUX_VAL(CP(SDRC_D27), (IEN | PTD | DIS | M0)) /*SDRC_D27*/\ + MUX_VAL(CP(SDRC_D28), (IEN | PTD | DIS | M0)) /*SDRC_D28*/\ + MUX_VAL(CP(SDRC_D29), (IEN | PTD | DIS | M0)) /*SDRC_D29*/\ + MUX_VAL(CP(SDRC_D30), (IEN | PTD | DIS | M0)) /*SDRC_D30*/\ + MUX_VAL(CP(SDRC_D31), (IEN | PTD | DIS | M0)) /*SDRC_D31*/\ + MUX_VAL(CP(SDRC_CLK), (IEN | PTD | DIS | M0)) /*SDRC_CLK*/\ + MUX_VAL(CP(SDRC_DQS0), (IEN | PTD | DIS | M0)) /*SDRC_DQS0*/\ + MUX_VAL(CP(SDRC_DQS1), (IEN | PTD | DIS | M0)) /*SDRC_DQS1*/\ + MUX_VAL(CP(SDRC_DQS2), (IEN | PTD | DIS | M0)) /*SDRC_DQS2*/\ + MUX_VAL(CP(SDRC_DQS3), (IEN | PTD | DIS | M0)) /*SDRC_DQS3*/\ + MUX_VAL(CP(GPMC_A1), (IDIS | PTD | DIS | M0)) /*GPMC_A1*/\ + MUX_VAL(CP(GPMC_A2), (IDIS | PTD | DIS | M0)) /*GPMC_A2*/\ + MUX_VAL(CP(GPMC_A3), (IDIS | PTD | DIS | M0)) /*GPMC_A3*/\ + MUX_VAL(CP(GPMC_A4), (IDIS | PTD | DIS | M0)) /*GPMC_A4*/\ + MUX_VAL(CP(GPMC_A5), (IDIS | PTD | DIS | M0)) /*GPMC_A5*/\ + MUX_VAL(CP(GPMC_A6), (IDIS | PTD | DIS | M0)) /*GPMC_A6*/\ + MUX_VAL(CP(GPMC_A7), (IDIS | PTD | DIS | M0)) /*GPMC_A7*/\ + MUX_VAL(CP(GPMC_A8), (IDIS | PTD | DIS | M0)) /*GPMC_A8*/\ + MUX_VAL(CP(GPMC_A9), (IDIS | PTD | DIS | M0)) /*GPMC_A9*/\ + MUX_VAL(CP(GPMC_A10), (IDIS | PTD | DIS | M0)) /*GPMC_A10*/\ + MUX_VAL(CP(GPMC_D0), (IEN | PTD | DIS | M0)) /*GPMC_D0*/\ + MUX_VAL(CP(GPMC_D1), (IEN | PTD | DIS | M0)) /*GPMC_D1*/\ + MUX_VAL(CP(GPMC_D2), (IEN | PTD | DIS | M0)) /*GPMC_D2*/\ + MUX_VAL(CP(GPMC_D3), (IEN | PTD | DIS | M0)) /*GPMC_D3*/\ + MUX_VAL(CP(GPMC_D4), (IEN | PTD | DIS | M0)) /*GPMC_D4*/\ + MUX_VAL(CP(GPMC_D5), (IEN | PTD | DIS | M0)) /*GPMC_D5*/\ + MUX_VAL(CP(GPMC_D6), (IEN | PTD | DIS | M0)) /*GPMC_D6*/\ + MUX_VAL(CP(GPMC_D7), (IEN | PTD | DIS | M0)) /*GPMC_D7*/\ + MUX_VAL(CP(GPMC_D8), (IEN | PTD | DIS | M0)) /*GPMC_D8*/\ + MUX_VAL(CP(GPMC_D9), (IEN | PTD | DIS | M0)) /*GPMC_D9*/\ + MUX_VAL(CP(GPMC_D10), (IEN | PTD | DIS | M0)) /*GPMC_D10*/\ + MUX_VAL(CP(GPMC_D11), (IEN | PTD | DIS | M0)) /*GPMC_D11*/\ + MUX_VAL(CP(GPMC_D12), (IEN | PTD | DIS | M0)) /*GPMC_D12*/\ + MUX_VAL(CP(GPMC_D13), (IEN | PTD | DIS | M0)) /*GPMC_D13*/\ + MUX_VAL(CP(GPMC_D14), (IEN | PTD | DIS | M0)) /*GPMC_D14*/\ + MUX_VAL(CP(GPMC_D15), (IEN | PTD | DIS | M0)) /*GPMC_D15*/\ + MUX_VAL(CP(GPMC_nCS0), (IDIS | PTU | EN | M0)) /*GPMC_nCS0*/\ + MUX_VAL(CP(GPMC_nCS1), (IDIS | PTU | EN | M0)) /*GPMC_nCS1*/\ + MUX_VAL(CP(GPMC_nCS2), (IDIS | PTU | EN | M0)) /*GPMC_nCS2*/\ + MUX_VAL(CP(GPMC_nCS3), (IDIS | PTU | EN | M0)) /*GPMC_nCS3*/\ + MUX_VAL(CP(GPMC_nCS4), (IDIS | PTU | EN | M0)) /*GPMC_nCS4*/\ + MUX_VAL(CP(GPMC_nCS5), (IDIS | PTU | EN | M0)) /*GPMC_nCS5*/\ + MUX_VAL(CP(GPMC_nCS6), (IDIS | PTU | EN | M0)) /*GPMC_nCS6*/\ + MUX_VAL(CP(GPMC_nCS7), (IDIS | PTU | EN | M0)) /*GPMC_nCS7*/\ + MUX_VAL(CP(GPMC_CLK), (IDIS | PTD | DIS | M0)) /*GPMC_CLK*/\ + MUX_VAL(CP(GPMC_nADV_ALE), (IDIS | PTD | DIS | M0)) /*GPMC_nADV_ALE*/\ + MUX_VAL(CP(GPMC_nOE), (IDIS | PTD | DIS | M0)) /*GPMC_nOE*/\ + MUX_VAL(CP(GPMC_nWE), (IDIS | PTD | DIS | M0)) /*GPMC_nWE*/\ + MUX_VAL(CP(GPMC_nBE0_CLE), (IDIS | PTD | DIS | M0)) /*GPMC_nBE0_CLE*/\ + MUX_VAL(CP(GPMC_nBE1), (IDIS | PTD | DIS | M4)) /*GPIO_61*/\ + MUX_VAL(CP(GPMC_nWP), (IEN | PTD | DIS | M0)) /*GPMC_nWP*/\ + MUX_VAL(CP(GPMC_WAIT0), (IEN | PTU | EN | M0)) /*GPMC_WAIT0*/\ + MUX_VAL(CP(GPMC_WAIT1), (IEN | PTU | EN | M0)) /*GPMC_WAIT1*/\ + MUX_VAL(CP(GPMC_WAIT2), (IEN | PTU | EN | M4)) /*GPIO_64*/\ + MUX_VAL(CP(GPMC_WAIT3), (IEN | PTU | EN | M4)) /*GPIO_65*/\ + MUX_VAL(CP(DSS_DATA18), (IEN | PTD | DIS | M4)) /*GPIO_88*/\ + MUX_VAL(CP(DSS_DATA19), (IEN | PTD | DIS | M4)) /*GPIO_89*/\ + MUX_VAL(CP(DSS_DATA20), (IEN | PTD | DIS | M4)) /*GPIO_90*/\ + MUX_VAL(CP(DSS_DATA21), (IEN | PTD | DIS | M4)) /*GPIO_91*/\ + MUX_VAL(CP(CAM_WEN), (IEN | PTD | DIS | M4)) /*GPIO_167*/\ + MUX_VAL(CP(UART1_TX), (IDIS | PTD | DIS | M0)) /*UART1_TX*/\ + MUX_VAL(CP(UART1_RTS), (IDIS | PTD | DIS | M0)) /*UART1_RTS*/\ + MUX_VAL(CP(UART1_CTS), (IEN | PTU | DIS | M0)) /*UART1_CTS*/\ + MUX_VAL(CP(UART1_RX), (IEN | PTD | DIS | M0)) /*UART1_RX*/\ + MUX_VAL(CP(McBSP1_DX), (IEN | PTD | DIS | M4)) /*GPIO_158*/\ + MUX_VAL(CP(SYS_32K), (IEN | PTD | DIS | M0)) /*SYS_32K*/\ + MUX_VAL(CP(SYS_BOOT0), (IEN | PTD | DIS | M4)) /*GPIO_2 */\ + MUX_VAL(CP(SYS_BOOT1), (IEN | PTD | DIS | M4)) /*GPIO_3 */\ + MUX_VAL(CP(SYS_BOOT2), (IEN | PTD | DIS | M4)) /*GPIO_4 */\ + MUX_VAL(CP(SYS_BOOT3), (IEN | PTD | DIS | M4)) /*GPIO_5 */\ + MUX_VAL(CP(SYS_BOOT4), (IEN | PTD | DIS | M4)) /*GPIO_6 */\ + MUX_VAL(CP(SYS_BOOT5), (IEN | PTD | DIS | M4)) /*GPIO_7 */\ + MUX_VAL(CP(SYS_BOOT6), (IEN | PTD | DIS | M4)) /*GPIO_8 */\ + MUX_VAL(CP(SYS_CLKOUT2), (IEN | PTU | EN | M4)) /*GPIO_186*/\ + MUX_VAL(CP(JTAG_nTRST), (IEN | PTD | DIS | M0)) /*JTAG_nTRST*/\ + MUX_VAL(CP(JTAG_TCK), (IEN | PTD | DIS | M0)) /*JTAG_TCK*/\ + MUX_VAL(CP(JTAG_TMS), (IEN | PTD | DIS | M0)) /*JTAG_TMS*/\ + MUX_VAL(CP(JTAG_TDI), (IEN | PTD | DIS | M0)) /*JTAG_TDI*/\ + MUX_VAL(CP(JTAG_EMU0), (IEN | PTD | DIS | M0)) /*JTAG_EMU0*/\ + MUX_VAL(CP(JTAG_EMU1), (IEN | PTD | DIS | M0)) /*JTAG_EMU1*/\ + MUX_VAL(CP(ETK_CLK), (IEN | PTD | DIS | M4)) /*GPIO_12*/\ + MUX_VAL(CP(ETK_CTL), (IEN | PTD | DIS | M4)) /*GPIO_13*/\ + MUX_VAL(CP(ETK_D0 ), (IEN | PTD | DIS | M4)) /*GPIO_14*/\ + MUX_VAL(CP(ETK_D1 ), (IEN | PTD | DIS | M4)) /*GPIO_15*/\ + MUX_VAL(CP(ETK_D2 ), (IEN | PTD | DIS | M4)) /*GPIO_16*/\ + MUX_VAL(CP(ETK_D10), (IEN | PTD | DIS | M4)) /*GPIO_24*/\ + MUX_VAL(CP(ETK_D11), (IEN | PTD | DIS | M4)) /*GPIO_25*/\ + MUX_VAL(CP(ETK_D12), (IEN | PTD | DIS | M4)) /*GPIO_26*/\ + MUX_VAL(CP(ETK_D13), (IEN | PTD | DIS | M4)) /*GPIO_27*/\ + MUX_VAL(CP(ETK_D14), (IEN | PTD | DIS | M4)) /*GPIO_28*/\ + MUX_VAL(CP(ETK_D15), (IEN | PTD | DIS | M4)) /*GPIO_29*/ + +/********************************************************** + * Routine: set_muxconf_regs + * Description: Setting up the configuration Mux registers + * specific to the hardware. Many pins need + * to be moved from protect to primary mode. + *********************************************************/ +void set_muxconf_regs(void) +{ + MUX_DEFAULT(); +} + +/********************************************************** + * Routine: nand+_init + * Description: Set up nand for nand and jffs2 commands + *********************************************************/ + +int nand_init(void) +{ + /* global settings */ + __raw_writel(0x10, GPMC_SYSCONFIG); /* smart idle */ + __raw_writel(0x0, GPMC_IRQENABLE); /* isr's sources masked */ + __raw_writel(0, GPMC_TIMEOUT_CONTROL);/* timeout disable */ + + /* Set the GPMC Vals . For NAND boot on 3430SDP, NAND is mapped at CS0 + * , NOR at CS1 and MPDB at CS3. And oneNAND boot, we map oneNAND at CS0. + * We configure only GPMC CS0 with required values. Configiring other devices + * at other CS in done in u-boot anyway. So we don't have to bother doing it here. + */ + __raw_writel(0 , GPMC_CONFIG7 + GPMC_CONFIG_CS0); + delay(1000); + + if ((get_mem_type() == GPMC_NAND) || (get_mem_type() == MMC_NAND)){ + __raw_writel( M_NAND_GPMC_CONFIG1, GPMC_CONFIG1 + GPMC_CONFIG_CS0); + __raw_writel( M_NAND_GPMC_CONFIG2, GPMC_CONFIG2 + GPMC_CONFIG_CS0); + __raw_writel( M_NAND_GPMC_CONFIG3, GPMC_CONFIG3 + GPMC_CONFIG_CS0); + __raw_writel( M_NAND_GPMC_CONFIG4, GPMC_CONFIG4 + GPMC_CONFIG_CS0); + __raw_writel( M_NAND_GPMC_CONFIG5, GPMC_CONFIG5 + GPMC_CONFIG_CS0); + __raw_writel( M_NAND_GPMC_CONFIG6, GPMC_CONFIG6 + GPMC_CONFIG_CS0); + + /* Enable the GPMC Mapping */ + __raw_writel(( ((OMAP34XX_GPMC_CS0_SIZE & 0xF)<<8) | + ((NAND_BASE_ADR>>24) & 0x3F) | + (1<<6) ), (GPMC_CONFIG7 + GPMC_CONFIG_CS0)); + delay(2000); + + if (nand_chip()){ +#ifdef CFG_PRINTF + printf("Unsupported Chip!\n"); +#endif + return 1; + } + + } + + if ((get_mem_type() == GPMC_ONENAND) || (get_mem_type() == MMC_ONENAND)){ + __raw_writel( ONENAND_GPMC_CONFIG1, GPMC_CONFIG1 + GPMC_CONFIG_CS0); + __raw_writel( ONENAND_GPMC_CONFIG2, GPMC_CONFIG2 + GPMC_CONFIG_CS0); + __raw_writel( ONENAND_GPMC_CONFIG3, GPMC_CONFIG3 + GPMC_CONFIG_CS0); + __raw_writel( ONENAND_GPMC_CONFIG4, GPMC_CONFIG4 + GPMC_CONFIG_CS0); + __raw_writel( ONENAND_GPMC_CONFIG5, GPMC_CONFIG5 + GPMC_CONFIG_CS0); + __raw_writel( ONENAND_GPMC_CONFIG6, GPMC_CONFIG6 + GPMC_CONFIG_CS0); + + /* Enable the GPMC Mapping */ + __raw_writel(( ((OMAP34XX_GPMC_CS0_SIZE & 0xF)<<8) | + ((ONENAND_BASE>>24) & 0x3F) | + (1<<6) ), (GPMC_CONFIG7 + GPMC_CONFIG_CS0)); + delay(2000); + + if (onenand_chip()){ +#ifdef CFG_PRINTF + printf("OneNAND Unsupported !\n"); +#endif + return 1; + } + } + return 0; +} + +/* optionally do something like blinking LED */ +void board_hang (void) +{ while (0) {};} + +/****************************************************************************** + * Dummy function to handle errors for EABI incompatibility + *****************************************************************************/ +void raise(void) +{ +} + +/****************************************************************************** + * Dummy function to handle errors for EABI incompatibility + *****************************************************************************/ +void abort(void) +{ +} diff --git a/x-loader/board/omap3evm/platform.S b/x-loader/board/omap3evm/platform.S new file mode 100644 index 0000000..8368487 --- /dev/null +++ b/x-loader/board/omap3evm/platform.S @@ -0,0 +1,435 @@ +/* + * Board specific setup info + * + * (C) Copyright 2004-2006 + * Texas Instruments, <www.ti.com> + * Richard Woodruff <r-woodruff2@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <asm/arch/cpu.h> +#include <asm/arch/mem.h> +#include <asm/arch/clocks.h> + +_TEXT_BASE: + .word TEXT_BASE /* sdram load addr from config.mk */ + +#if !defined(CFG_NAND_BOOT) && !defined(CFG_NAND_BOOT) +/************************************************************************** + * cpy_clk_code: relocates clock code into SRAM where its safer to execute + * R1 = SRAM destination address. + *************************************************************************/ +.global cpy_clk_code + cpy_clk_code: + /* Copy DPLL code into SRAM */ + adr r0, go_to_speed /* get addr of clock setting code */ + mov r2, #384 /* r2 size to copy (div by 32 bytes) */ + mov r1, r1 /* r1 <- dest address (passed in) */ + add r2, r2, r0 /* r2 <- source end address */ +next2: + ldmia r0!, {r3-r10} /* copy from source address [r0] */ + stmia r1!, {r3-r10} /* copy to target address [r1] */ + cmp r0, r2 /* until source end address [r2] */ + bne next2 + mov pc, lr /* back to caller */ + +/* **************************************************************************** + * NOTE: 3430 X-loader currently does not use this code. +* It could be removed its is kept for compatabily with u-boot. + * + * go_to_speed: -Moves to bypass, -Commits clock dividers, -puts dpll at speed + * -executed from SRAM. + * R0 = CM_CLKEN_PLL-bypass value + * R1 = CM_CLKSEL1_PLL-m, n, and divider values + * R2 = CM_CLKSEL_CORE-divider values + * R3 = CM_IDLEST_CKGEN - addr dpll lock wait + * + * Note: If core unlocks/relocks and SDRAM is running fast already it gets + * confused. A reset of the controller gets it back. Taking away its + * L3 when its not in self refresh seems bad for it. Normally, this code + * runs from flash before SDR is init so that should be ok. + ******************************************************************************/ +.global go_to_speed + go_to_speed: + stmfd sp!, {r4-r6} + + /* move into fast relock bypass */ + ldr r4, pll_ctl_add + str r0, [r4] +wait1: + ldr r5, [r3] /* get status */ + and r5, r5, #0x1 /* isolate core status */ + cmp r5, #0x1 /* still locked? */ + beq wait1 /* if lock, loop */ + + /* set new dpll dividers _after_ in bypass */ + ldr r5, pll_div_add1 + str r1, [r5] /* set m, n, m2 */ + ldr r5, pll_div_add2 + str r2, [r5] /* set l3/l4/.. dividers*/ + ldr r5, pll_div_add3 /* wkup */ + ldr r2, pll_div_val3 /* rsm val */ + str r2, [r5] + ldr r5, pll_div_add4 /* gfx */ + ldr r2, pll_div_val4 + str r2, [r5] + ldr r5, pll_div_add5 /* emu */ + ldr r2, pll_div_val5 + str r2, [r5] + + /* now prepare GPMC (flash) for new dpll speed */ + /* flash needs to be stable when we jump back to it */ + ldr r5, flash_cfg3_addr + ldr r2, flash_cfg3_val + str r2, [r5] + ldr r5, flash_cfg4_addr + ldr r2, flash_cfg4_val + str r2, [r5] + ldr r5, flash_cfg5_addr + ldr r2, flash_cfg5_val + str r2, [r5] + ldr r5, flash_cfg1_addr + ldr r2, [r5] + orr r2, r2, #0x3 /* up gpmc divider */ + str r2, [r5] + + /* lock DPLL3 and wait a bit */ + orr r0, r0, #0x7 /* set up for lock mode */ + str r0, [r4] /* lock */ + nop /* ARM slow at this point working at sys_clk */ + nop + nop + nop +wait2: + ldr r5, [r3] /* get status */ + and r5, r5, #0x1 /* isolate core status */ + cmp r5, #0x1 /* still locked? */ + bne wait2 /* if lock, loop */ + nop + nop + nop + nop + ldmfd sp!, {r4-r6} + mov pc, lr /* back to caller, locked */ + +_go_to_speed: .word go_to_speed + +/* these constants need to be close for PIC code */ +/* The Nor has to be in the Flash Base CS0 for this condition to happen */ +flash_cfg1_addr: + .word (GPMC_CONFIG_CS0 + GPMC_CONFIG1) +flash_cfg3_addr: + .word (GPMC_CONFIG_CS0 + GPMC_CONFIG3) +flash_cfg3_val: + .word STNOR_GPMC_CONFIG3 +flash_cfg4_addr: + .word (GPMC_CONFIG_CS0 + GPMC_CONFIG4) +flash_cfg4_val: + .word STNOR_GPMC_CONFIG4 +flash_cfg5_val: + .word STNOR_GPMC_CONFIG5 +flash_cfg5_addr: + .word (GPMC_CONFIG_CS0 + GPMC_CONFIG5) +pll_ctl_add: + .word CM_CLKEN_PLL +pll_div_add1: + .word CM_CLKSEL1_PLL +pll_div_add2: + .word CM_CLKSEL_CORE +pll_div_add3: + .word CM_CLKSEL_WKUP +pll_div_val3: + .word (WKUP_RSM << 1) +pll_div_add4: + .word CM_CLKSEL_GFX +pll_div_val4: + .word (GFX_DIV << 0) +pll_div_add5: + .word CM_CLKSEL1_EMU +pll_div_val5: + .word CLSEL1_EMU_VAL + +#endif + +.globl lowlevel_init +lowlevel_init: + ldr sp, SRAM_STACK + str ip, [sp] /* stash old link register */ + mov ip, lr /* save link reg across call */ + bl s_init /* go setup pll,mux,memory */ + ldr ip, [sp] /* restore save ip */ + mov lr, ip /* restore link reg */ + + /* back to arch calling code */ + mov pc, lr + + /* the literal pools origin */ + .ltorg + +REG_CONTROL_STATUS: + .word CONTROL_STATUS +SRAM_STACK: + .word LOW_LEVEL_SRAM_STACK + + +/* DPLL(1-4) PARAM TABLES */ +/* Each of the tables has M, N, FREQSEL, M2 values defined for nominal + * OPP (1.2V). The fields are defined according to dpll_param struct(clock.c). + * The values are defined for all possible sysclk and for ES1 and ES2. + */ + +mpu_dpll_param: +/* 12MHz */ +/* ES1 */ +.word 0x0FE +.word 0x07 +.word 0x05 +.word 0x01 +/* ES2 */ +.word 0x0FA +.word 0x05 +.word 0x07 +.word 0x01 + +/* 13MHz */ +/* ES1 */ +.word 0x17D +.word 0x0C +.word 0x03 +.word 0x01 +/* ES2 */ +.word 0x1F4 +.word 0x0C +.word 0x03 +.word 0x01 + +/* 19.2MHz */ +/* ES1 */ +.word 0x179 +.word 0x12 +.word 0x04 +.word 0x01 +/* ES2 */ +.word 0x271 +.word 0x17 +.word 0x03 +.word 0x01 + +/* 26MHz */ +/* ES1 */ +.word 0x17D +.word 0x19 +.word 0x03 +.word 0x01 +/* ES2 */ +.word 0x0FA +.word 0x0C +.word 0x07 +.word 0x01 + +/* 38.4MHz */ +/* ES1 */ +.word 0x1FA +.word 0x32 +.word 0x03 +.word 0x01 +/* ES2 */ +.word 0x271 +.word 0x2F +.word 0x03 +.word 0x01 + + +.globl get_mpu_dpll_param +get_mpu_dpll_param: + adr r0, mpu_dpll_param + mov pc, lr + +iva_dpll_param: +/* 12MHz */ +/* ES1 */ +.word 0x07D +.word 0x05 +.word 0x07 +.word 0x01 +/* ES2 */ +.word 0x0B4 +.word 0x05 +.word 0x07 +.word 0x01 + +/* 13MHz */ +/* ES1 */ +.word 0x0FA +.word 0x0C +.word 0x03 +.word 0x01 +/* ES2 */ +.word 0x168 +.word 0x0C +.word 0x03 +.word 0x01 + +/* 19.2MHz */ +/* ES1 */ +.word 0x082 +.word 0x09 +.word 0x07 +.word 0x01 +/* ES2 */ +.word 0x0E1 +.word 0x0B +.word 0x06 +.word 0x01 + +/* 26MHz */ +/* ES1 */ +.word 0x07D +.word 0x0C +.word 0x07 +.word 0x01 +/* ES2 */ +.word 0x0B4 +.word 0x0C +.word 0x07 +.word 0x01 + +/* 38.4MHz */ +/* ES1 */ +.word 0x13F +.word 0x30 +.word 0x03 +.word 0x01 +/* ES2 */ +.word 0x0E1 +.word 0x17 +.word 0x06 +.word 0x01 + + +.globl get_iva_dpll_param +get_iva_dpll_param: + adr r0, iva_dpll_param + mov pc, lr + +core_dpll_param: +/* 12MHz */ +/* ES1 */ +.word 0x19F +.word 0x0E +.word 0x03 +.word 0x01 +/* ES2 */ +.word 0x0A6 +.word 0x05 +.word 0x07 +.word 0x01 + +/* 13MHz */ +/* ES1 */ +.word 0x1B2 +.word 0x10 +.word 0x03 +.word 0x01 +/* ES2 */ +.word 0x14C +.word 0x0C +.word 0x03 +.word 0x01 + +/* 19.2MHz */ +/* ES1 */ +.word 0x19F +.word 0x17 +.word 0x03 +.word 0x01 +/* ES2 */ +.word 0x19F +.word 0x17 +.word 0x03 +.word 0x01 + +/* 26MHz */ +/* ES1 */ +.word 0x1B2 +.word 0x21 +.word 0x03 +.word 0x01 +/* ES2 */ +.word 0x0A6 +.word 0x0C +.word 0x07 +.word 0x01 + +/* 38.4MHz */ +/* ES1 */ +.word 0x19F +.word 0x2F +.word 0x03 +.word 0x01 +/* ES2 */ +.word 0x19F +.word 0x2F +.word 0x03 +.word 0x01 + +.globl get_core_dpll_param +get_core_dpll_param: + adr r0, core_dpll_param + mov pc, lr + +/* PER DPLL values are same for both ES1 and ES2 */ +per_dpll_param: +/* 12MHz */ +.word 0xD8 +.word 0x05 +.word 0x07 +.word 0x09 + +/* 13MHz */ +.word 0x1B0 +.word 0x0C +.word 0x03 +.word 0x09 + +/* 19.2MHz */ +.word 0xE1 +.word 0x09 +.word 0x07 +.word 0x09 + +/* 26MHz */ +.word 0xD8 +.word 0x0C +.word 0x07 +.word 0x09 + +/* 38.4MHz */ +.word 0xE1 +.word 0x13 +.word 0x07 +.word 0x09 + +.globl get_per_dpll_param +get_per_dpll_param: + adr r0, per_dpll_param + mov pc, lr + diff --git a/x-loader/board/omap3evm/x-load.lds b/x-loader/board/omap3evm/x-load.lds new file mode 100644 index 0000000..5f352d3 --- /dev/null +++ b/x-loader/board/omap3evm/x-load.lds @@ -0,0 +1,54 @@ +/* + * November 2006 - Changed to support 3430sdp device + * Copyright (c) 2004-2006 Texas Instruments + * + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, <gj@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + . = 0x00000000; + + . = ALIGN(4); + .text : + { + cpu/omap3/start.o (.text) + *(.text) + } + + . = ALIGN(4); + .rodata : { *(.rodata) } + + . = ALIGN(4); + .data : { *(.data) } + + . = ALIGN(4); + .got : { *(.got) } + + . = ALIGN(4); + __bss_start = .; + .bss : { *(.bss) } + _end = .; +} diff --git a/x-loader/board/overo/Makefile b/x-loader/board/overo/Makefile new file mode 100644 index 0000000..2e6c25d --- /dev/null +++ b/x-loader/board/overo/Makefile @@ -0,0 +1,47 @@ +# +# (C) Copyright 2000, 2001, 2002 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = lib$(BOARD).a + +OBJS := overo.o +SOBJS := platform.o + +$(LIB): $(OBJS) $(SOBJS) + $(AR) crv $@ $^ + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) + $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ + +-include .depend + +######################################################################### diff --git a/x-loader/board/overo/config.mk b/x-loader/board/overo/config.mk new file mode 100644 index 0000000..28e354f --- /dev/null +++ b/x-loader/board/overo/config.mk @@ -0,0 +1,20 @@ +# +# (C) Copyright 2006 +# Texas Instruments, <www.ti.com> +# +# Overo board uses TI OMAP35xx (ARM-CortexA8) cpu +# see http://www.ti.com/ for more information on Texas Instruments +# +# Overo has 1 bank of 128MB mPOP-SDRAM on CS0 +# Physical Address: +# 8000'0000 (bank0) + +# For use if you want X-Loader to relocate from SRAM to DDR +TEXT_BASE = 0x80e80000 + +# For XIP in 64K of SRAM or debug (GP device has it all availabe) +# SRAM 40200000-4020FFFF base +# initial stack at 0x4020fffc used in s_init (below xloader). +# The run time stack is (above xloader, 2k below) +# If any globals exist there needs to be room for them also +#TEXT_BASE = 0x40200800 diff --git a/x-loader/board/overo/overo.c b/x-loader/board/overo/overo.c new file mode 100644 index 0000000..8454e24 --- /dev/null +++ b/x-loader/board/overo/overo.c @@ -0,0 +1,902 @@ +/* + * (C) Copyright 2006 + * Texas Instruments, <www.ti.com> + * Jian Zhang <jzhang@ti.com> + * Richard Woodruff <r-woodruff2@ti.com> + * + * Modified for overo + * Steve Sakoman <steve@sakoman.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <command.h> +#include <part.h> +#include <fat.h> +#include <asm/arch/cpu.h> +#include <asm/arch/bits.h> +#include <asm/arch/mux.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/sys_info.h> +#include <asm/arch/clocks.h> +#include <asm/arch/mem.h> + +/* Used to index into DPLL parameter tables */ +struct dpll_param { + unsigned int m; + unsigned int n; + unsigned int fsel; + unsigned int m2; +}; + +typedef struct dpll_param dpll_param; + +/* Following functions are exported from lowlevel_init.S */ +extern dpll_param *get_mpu_dpll_param(); +extern dpll_param *get_iva_dpll_param(); +extern dpll_param *get_core_dpll_param(); +extern dpll_param *get_per_dpll_param(); + +#define __raw_readl(a) (*(volatile unsigned int *)(a)) +#define __raw_writel(v, a) (*(volatile unsigned int *)(a) = (v)) +#define __raw_readw(a) (*(volatile unsigned short *)(a)) +#define __raw_writew(v, a) (*(volatile unsigned short *)(a) = (v)) + +/******************************************************* + * Routine: delay + * Description: spinning delay to use before udelay works + ******************************************************/ +static inline void delay(unsigned long loops) +{ + __asm__ volatile ("1:\n" "subs %0, %1, #1\n" + "bne 1b":"=r" (loops):"0"(loops)); +} + +void udelay (unsigned long usecs) { + delay(usecs); +} + +/***************************************** + * Routine: board_init + * Description: Early hardware init. + *****************************************/ +int board_init(void) +{ + return 0; +} + +/************************************************************* + * get_device_type(): tell if GP/HS/EMU/TST + *************************************************************/ +u32 get_device_type(void) +{ + int mode; + mode = __raw_readl(CONTROL_STATUS) & (DEVICE_MASK); + return mode >>= 8; +} + +/************************************************ + * get_sysboot_value(void) - return SYS_BOOT[4:0] + ************************************************/ +u32 get_sysboot_value(void) +{ + int mode; + mode = __raw_readl(CONTROL_STATUS) & (SYSBOOT_MASK); + return mode; +} + +/************************************************************* + * Routine: get_mem_type(void) - returns the kind of memory connected + * to GPMC that we are trying to boot form. Uses SYS BOOT settings. + *************************************************************/ +u32 get_mem_type(void) +{ + u32 mem_type = get_sysboot_value(); + switch (mem_type) { + case 0: + case 2: + case 4: + case 16: + case 22: + return GPMC_ONENAND; + + case 1: + case 12: + case 15: + case 21: + case 27: + return GPMC_NAND; + + case 3: + case 6: + return MMC_ONENAND; + + case 8: + case 11: + case 14: + case 20: + case 26: + return GPMC_MDOC; + + case 17: + case 18: + case 24: + return MMC_NAND; + + case 7: + case 10: + case 13: + case 19: + case 25: + default: + return GPMC_NOR; + } +} + +/****************************************** + * get_cpu_rev(void) - extract version info + ******************************************/ +u32 get_cpu_rev(void) +{ + u32 cpuid = 0; + /* On ES1.0 the IDCODE register is not exposed on L4 + * so using CPU ID to differentiate + * between ES2.0 and ES1.0. + */ + __asm__ __volatile__("mrc p15, 0, %0, c0, c0, 0":"=r" (cpuid)); + if ((cpuid & 0xf) == 0x0) + return CPU_3430_ES1; + else + return CPU_3430_ES2; + +} + +/****************************************** + * cpu_is_3410(void) - returns true for 3410 + ******************************************/ +u32 cpu_is_3410(void) +{ + int status; + if (get_cpu_rev() < CPU_3430_ES2) { + return 0; + } else { + /* read scalability status and return 1 for 3410*/ + status = __raw_readl(CONTROL_SCALABLE_OMAP_STATUS); + /* Check whether MPU frequency is set to 266 MHz which + * is nominal for 3410. If yes return true else false + */ + if (((status >> 8) & 0x3) == 0x2) + return 1; + else + return 0; + } +} + +/***************************************************************** + * sr32 - clear & set a value in a bit range for a 32 bit address + *****************************************************************/ +void sr32(u32 addr, u32 start_bit, u32 num_bits, u32 value) +{ + u32 tmp, msk = 0; + msk = 1 << num_bits; + --msk; + tmp = __raw_readl(addr) & ~(msk << start_bit); + tmp |= value << start_bit; + __raw_writel(tmp, addr); +} + +/********************************************************************* + * wait_on_value() - common routine to allow waiting for changes in + * volatile regs. + *********************************************************************/ +u32 wait_on_value(u32 read_bit_mask, u32 match_value, u32 read_addr, u32 bound) +{ + u32 i = 0, val; + do { + ++i; + val = __raw_readl(read_addr) & read_bit_mask; + if (val == match_value) + return 1; + if (i == bound) + return 0; + } while (1); +} + +#ifdef CFG_3430SDRAM_DDR +/********************************************************************* + * config_3430sdram_ddr() - Init DDR on 3430SDP dev board. + *********************************************************************/ +void config_3430sdram_ddr(void) +{ + /* reset sdrc controller */ + __raw_writel(SOFTRESET, SDRC_SYSCONFIG); + wait_on_value(BIT0, BIT0, SDRC_STATUS, 12000000); + __raw_writel(0, SDRC_SYSCONFIG); + + /* setup sdrc to ball mux */ + __raw_writel(SDP_SDRC_SHARING, SDRC_SHARING); + + /* SDRC put in weak */ +// (*(unsigned int*)0x6D00008C) = 0x00000020; + + /* SDRC_MCFG0 register */ + (*(unsigned int*)0x6D000080) = 0x02584099;//from Micron + + /* SDRC_ACTIM_CTRLA0 register */ +//our value (*(unsigned int*)0x6D00009c) = 0xa29db4c6;// for 166M + (*(unsigned int*)0x6D00009c) = 0xaa9db4c6;// for 166M from rkw + + /* SDRC_ACTIM_CTRLB0 register */ +//from micron (*(unsigned int*)0x6D0000a0) = 0x12214;// for 166M + +// (*(unsigned int*)0x6D0000a0) = 0x00011417; our value + (*(unsigned int*)0x6D0000a0) = 0x00011517; + + /* SDRC_RFR_CTRL0 register */ +//from micron (*(unsigned int*)0x6D0000a4) =0x54601; // for 166M + + (*(unsigned int*)0x6D0000a4) =0x0004DC01; + + /* Disble Power Down of CKE cuz of 1 CKE on combo part */ + (*(unsigned int*)0x6D000070) = 0x00000081; + + /* SDRC_Manual command register */ + (*(unsigned int*)0x6D0000a8) = 0x00000000; // NOP command + delay(5000); + (*(unsigned int*)0x6D0000a8) = 0x00000001; // Precharge command + (*(unsigned int*)0x6D0000a8) = 0x00000002; // Auto-refresh command + (*(unsigned int*)0x6D0000a8) = 0x00000002; // Auto-refresh command + + /* SDRC MR0 register */ + (*(int*)0x6D000084) = 0x00000032; // Burst length =4 + // CAS latency = 3 + // Write Burst = Read Burst + // Serial Mode + + /* SDRC DLLA control register */ + (*(unsigned int*)0x6D000060) = 0x0000A; + delay(0x20000); // some delay + +} +#endif /* CFG_3430SDRAM_DDR */ + +/************************************************************* + * get_sys_clk_speed - determine reference oscillator speed + * based on known 32kHz clock and gptimer. + *************************************************************/ +u32 get_osc_clk_speed(void) +{ + u32 start, cstart, cend, cdiff, val; + + val = __raw_readl(PRM_CLKSRC_CTRL); + /* If SYS_CLK is being divided by 2, remove for now */ + val = (val & (~BIT7)) | BIT6; + __raw_writel(val, PRM_CLKSRC_CTRL); + + /* enable timer2 */ + val = __raw_readl(CM_CLKSEL_WKUP) | BIT0; + __raw_writel(val, CM_CLKSEL_WKUP); /* select sys_clk for GPT1 */ + + /* Enable I and F Clocks for GPT1 */ + val = __raw_readl(CM_ICLKEN_WKUP) | BIT0 | BIT2; + __raw_writel(val, CM_ICLKEN_WKUP); + val = __raw_readl(CM_FCLKEN_WKUP) | BIT0; + __raw_writel(val, CM_FCLKEN_WKUP); + + __raw_writel(0, OMAP34XX_GPT1 + TLDR); /* start counting at 0 */ + __raw_writel(GPT_EN, OMAP34XX_GPT1 + TCLR); /* enable clock */ + /* enable 32kHz source */ + /* enabled out of reset */ + /* determine sys_clk via gauging */ + + start = 20 + __raw_readl(S32K_CR); /* start time in 20 cycles */ + while (__raw_readl(S32K_CR) < start); /* dead loop till start time */ + cstart = __raw_readl(OMAP34XX_GPT1 + TCRR); /* get start sys_clk count */ + while (__raw_readl(S32K_CR) < (start + 20)); /* wait for 40 cycles */ + cend = __raw_readl(OMAP34XX_GPT1 + TCRR); /* get end sys_clk count */ + cdiff = cend - cstart; /* get elapsed ticks */ + + /* based on number of ticks assign speed */ + if (cdiff > 19000) + return S38_4M; + else if (cdiff > 15200) + return S26M; + else if (cdiff > 13000) + return S24M; + else if (cdiff > 9000) + return S19_2M; + else if (cdiff > 7600) + return S13M; + else + return S12M; +} + +/****************************************************************************** + * get_sys_clkin_sel() - returns the sys_clkin_sel field value based on + * -- input oscillator clock frequency. + * + *****************************************************************************/ +void get_sys_clkin_sel(u32 osc_clk, u32 *sys_clkin_sel) +{ + if (osc_clk == S38_4M) + *sys_clkin_sel = 4; + else if (osc_clk == S26M) + *sys_clkin_sel = 3; + else if (osc_clk == S19_2M) + *sys_clkin_sel = 2; + else if (osc_clk == S13M) + *sys_clkin_sel = 1; + else if (osc_clk == S12M) + *sys_clkin_sel = 0; +} + +/****************************************************************************** + * prcm_init() - inits clocks for PRCM as defined in clocks.h + * -- called from SRAM, or Flash (using temp SRAM stack). + *****************************************************************************/ +void prcm_init(void) +{ + u32 osc_clk = 0, sys_clkin_sel; + dpll_param *dpll_param_p; + u32 clk_index, sil_index; + + /* Gauge the input clock speed and find out the sys_clkin_sel + * value corresponding to the input clock. + */ + osc_clk = get_osc_clk_speed(); + get_sys_clkin_sel(osc_clk, &sys_clkin_sel); + + sr32(PRM_CLKSEL, 0, 3, sys_clkin_sel); /* set input crystal speed */ + + /* If the input clock is greater than 19.2M always divide/2 */ + if (sys_clkin_sel > 2) { + sr32(PRM_CLKSRC_CTRL, 6, 2, 2);/* input clock divider */ + clk_index = sys_clkin_sel/2; + } else { + sr32(PRM_CLKSRC_CTRL, 6, 2, 1);/* input clock divider */ + clk_index = sys_clkin_sel; + } + + /* The DPLL tables are defined according to sysclk value and + * silicon revision. The clk_index value will be used to get + * the values for that input sysclk from the DPLL param table + * and sil_index will get the values for that SysClk for the + * appropriate silicon rev. + */ + sil_index = get_cpu_rev() - 1; + + /* Unlock MPU DPLL (slows things down, and needed later) */ + sr32(CM_CLKEN_PLL_MPU, 0, 3, PLL_LOW_POWER_BYPASS); + wait_on_value(BIT0, 0, CM_IDLEST_PLL_MPU, LDELAY); + + /* Getting the base address of Core DPLL param table*/ + dpll_param_p = (dpll_param *)get_core_dpll_param(); + /* Moving it to the right sysclk and ES rev base */ + dpll_param_p = dpll_param_p + 2*clk_index + sil_index; + /* CORE DPLL */ + /* sr32(CM_CLKSEL2_EMU) set override to work when asleep */ + sr32(CM_CLKEN_PLL, 0, 3, PLL_FAST_RELOCK_BYPASS); + wait_on_value(BIT0, 0, CM_IDLEST_CKGEN, LDELAY); + sr32(CM_CLKSEL1_EMU, 16, 5, CORE_M3X2); /* m3x2 */ + sr32(CM_CLKSEL1_PLL, 27, 2, dpll_param_p->m2); /* Set M2 */ + sr32(CM_CLKSEL1_PLL, 16, 11, dpll_param_p->m); /* Set M */ + sr32(CM_CLKSEL1_PLL, 8, 7, dpll_param_p->n); /* Set N */ + sr32(CM_CLKSEL1_PLL, 6, 1, 0); /* 96M Src */ + sr32(CM_CLKSEL_CORE, 8, 4, CORE_SSI_DIV); /* ssi */ + sr32(CM_CLKSEL_CORE, 4, 2, CORE_FUSB_DIV); /* fsusb */ + sr32(CM_CLKSEL_CORE, 2, 2, CORE_L4_DIV); /* l4 */ + sr32(CM_CLKSEL_CORE, 0, 2, CORE_L3_DIV); /* l3 */ + sr32(CM_CLKSEL_GFX, 0, 3, GFX_DIV); /* gfx */ + sr32(CM_CLKSEL_WKUP, 1, 2, WKUP_RSM); /* reset mgr */ + sr32(CM_CLKEN_PLL, 4, 4, dpll_param_p->fsel); /* FREQSEL */ + sr32(CM_CLKEN_PLL, 0, 3, PLL_LOCK); /* lock mode */ + wait_on_value(BIT0, 1, CM_IDLEST_CKGEN, LDELAY); + + /* Getting the base address to PER DPLL param table*/ + dpll_param_p = (dpll_param *)get_per_dpll_param(); + /* Moving it to the right sysclk base */ + dpll_param_p = dpll_param_p + clk_index; + /* PER DPLL */ + sr32(CM_CLKEN_PLL, 16, 3, PLL_STOP); + wait_on_value(BIT1, 0, CM_IDLEST_CKGEN, LDELAY); + sr32(CM_CLKSEL1_EMU, 24, 5, PER_M6X2); /* set M6 */ + sr32(CM_CLKSEL_CAM, 0, 5, PER_M5X2); /* set M5 */ + sr32(CM_CLKSEL_DSS, 0, 5, PER_M4X2); /* set M4 */ + sr32(CM_CLKSEL_DSS, 8, 5, PER_M3X2); /* set M3 */ + sr32(CM_CLKSEL3_PLL, 0, 5, dpll_param_p->m2); /* set M2 */ + sr32(CM_CLKSEL2_PLL, 8, 11, dpll_param_p->m); /* set m */ + sr32(CM_CLKSEL2_PLL, 0, 7, dpll_param_p->n); /* set n */ + sr32(CM_CLKEN_PLL, 20, 4, dpll_param_p->fsel);/* FREQSEL */ + sr32(CM_CLKEN_PLL, 16, 3, PLL_LOCK); /* lock mode */ + wait_on_value(BIT1, 2, CM_IDLEST_CKGEN, LDELAY); + + /* Getting the base address to MPU DPLL param table*/ + dpll_param_p = (dpll_param *)get_mpu_dpll_param(); + /* Moving it to the right sysclk and ES rev base */ + dpll_param_p = dpll_param_p + 2*clk_index + sil_index; + /* MPU DPLL (unlocked already) */ + sr32(CM_CLKSEL2_PLL_MPU, 0, 5, dpll_param_p->m2); /* Set M2 */ + sr32(CM_CLKSEL1_PLL_MPU, 8, 11, dpll_param_p->m); /* Set M */ + sr32(CM_CLKSEL1_PLL_MPU, 0, 7, dpll_param_p->n); /* Set N */ + sr32(CM_CLKEN_PLL_MPU, 4, 4, dpll_param_p->fsel); /* FREQSEL */ + sr32(CM_CLKEN_PLL_MPU, 0, 3, PLL_LOCK); /* lock mode */ + wait_on_value(BIT0, 1, CM_IDLEST_PLL_MPU, LDELAY); + + /* Getting the base address to IVA DPLL param table*/ + dpll_param_p = (dpll_param *)get_iva_dpll_param(); + /* Moving it to the right sysclk and ES rev base */ + dpll_param_p = dpll_param_p + 2*clk_index + sil_index; + /* IVA DPLL (set to 12*20=240MHz) */ + sr32(CM_CLKEN_PLL_IVA2, 0, 3, PLL_STOP); + wait_on_value(BIT0, 0, CM_IDLEST_PLL_IVA2, LDELAY); + sr32(CM_CLKSEL2_PLL_IVA2, 0, 5, dpll_param_p->m2); /* set M2 */ + sr32(CM_CLKSEL1_PLL_IVA2, 8, 11, dpll_param_p->m); /* set M */ + sr32(CM_CLKSEL1_PLL_IVA2, 0, 7, dpll_param_p->n); /* set N */ + sr32(CM_CLKEN_PLL_IVA2, 4, 4, dpll_param_p->fsel); /* FREQSEL */ + sr32(CM_CLKEN_PLL_IVA2, 0, 3, PLL_LOCK); /* lock mode */ + wait_on_value(BIT0, 1, CM_IDLEST_PLL_IVA2, LDELAY); + + /* Set up GPTimers to sys_clk source only */ + sr32(CM_CLKSEL_PER, 0, 8, 0xff); + sr32(CM_CLKSEL_WKUP, 0, 1, 1); + + delay(5000); +} + +/***************************************** + * Routine: secure_unlock + * Description: Setup security registers for access + * (GP Device only) + *****************************************/ +void secure_unlock(void) +{ + /* Permission values for registers -Full fledged permissions to all */ + #define UNLOCK_1 0xFFFFFFFF + #define UNLOCK_2 0x00000000 + #define UNLOCK_3 0x0000FFFF + /* Protection Module Register Target APE (PM_RT)*/ + __raw_writel(UNLOCK_1, RT_REQ_INFO_PERMISSION_1); + __raw_writel(UNLOCK_1, RT_READ_PERMISSION_0); + __raw_writel(UNLOCK_1, RT_WRITE_PERMISSION_0); + __raw_writel(UNLOCK_2, RT_ADDR_MATCH_1); + + __raw_writel(UNLOCK_3, GPMC_REQ_INFO_PERMISSION_0); + __raw_writel(UNLOCK_3, GPMC_READ_PERMISSION_0); + __raw_writel(UNLOCK_3, GPMC_WRITE_PERMISSION_0); + + __raw_writel(UNLOCK_3, OCM_REQ_INFO_PERMISSION_0); + __raw_writel(UNLOCK_3, OCM_READ_PERMISSION_0); + __raw_writel(UNLOCK_3, OCM_WRITE_PERMISSION_0); + __raw_writel(UNLOCK_2, OCM_ADDR_MATCH_2); + + /* IVA Changes */ + __raw_writel(UNLOCK_3, IVA2_REQ_INFO_PERMISSION_0); + __raw_writel(UNLOCK_3, IVA2_READ_PERMISSION_0); + __raw_writel(UNLOCK_3, IVA2_WRITE_PERMISSION_0); + + __raw_writel(UNLOCK_1, SMS_RG_ATT0); /* SDRC region 0 public */ +} + +/********************************************************** + * Routine: try_unlock_sram() + * Description: If chip is GP type, unlock the SRAM for + * general use. + ***********************************************************/ +void try_unlock_memory(void) +{ + int mode; + + /* if GP device unlock device SRAM for general use */ + /* secure code breaks for Secure/Emulation device - HS/E/T*/ + mode = get_device_type(); + if (mode == GP_DEVICE) + secure_unlock(); + return; +} + +/********************************************************** + * Routine: s_init + * Description: Does early system init of muxing and clocks. + * - Called at time when only stack is available. + **********************************************************/ + +void s_init(void) +{ + watchdog_init(); +#ifdef CONFIG_3430_AS_3410 + /* setup the scalability control register for + * 3430 to work in 3410 mode + */ + __raw_writel(0x5ABF, CONTROL_SCALABLE_OMAP_OCP); +#endif + try_unlock_memory(); + set_muxconf_regs(); + delay(100); + prcm_init(); + per_clocks_enable(); + config_3430sdram_ddr(); +} + +/******************************************************* + * Routine: misc_init_r + * Description: Init ethernet (done here so udelay works) + ********************************************************/ +int misc_init_r(void) +{ +#ifdef CONFIG_MMC + /* REMOVE!! for proto boards only */ + /* set vaux2 to 2.8V */ + unsigned char byte = 0x20; + i2c_write(0x4B, 0x76, 1, &byte, 1); + byte = 0x09; + i2c_write(0x4B, 0x79, 1, &byte, 1); + + udelay(5000); +#endif + return 0; +} + +/****************************************************** + * Routine: wait_for_command_complete + * Description: Wait for posting to finish on watchdog + ******************************************************/ +void wait_for_command_complete(unsigned int wd_base) +{ + int pending = 1; + do { + pending = __raw_readl(wd_base + WWPS); + } while (pending); +} + +/**************************************** + * Routine: watchdog_init + * Description: Shut down watch dogs + *****************************************/ +void watchdog_init(void) +{ + /* There are 3 watch dogs WD1=Secure, WD2=MPU, WD3=IVA. WD1 is + * either taken care of by ROM (HS/EMU) or not accessible (GP). + * We need to take care of WD2-MPU or take a PRCM reset. WD3 + * should not be running and does not generate a PRCM reset. + */ + sr32(CM_FCLKEN_WKUP, 5, 1, 1); + sr32(CM_ICLKEN_WKUP, 5, 1, 1); + wait_on_value(BIT5, 0x20, CM_IDLEST_WKUP, 5); /* some issue here */ + + __raw_writel(WD_UNLOCK1, WD2_BASE + WSPR); + wait_for_command_complete(WD2_BASE); + __raw_writel(WD_UNLOCK2, WD2_BASE + WSPR); +} + +/********************************************** + * Routine: dram_init + * Description: sets uboots idea of sdram size + **********************************************/ +int dram_init(void) +{ + return 0; +} + +/***************************************************************** + * Routine: peripheral_enable + * Description: Enable the clks & power for perifs (GPT2, UART1,...) + ******************************************************************/ +void per_clocks_enable(void) +{ + /* Enable GP2 timer. */ + sr32(CM_CLKSEL_PER, 0, 1, 0x1); /* GPT2 = sys clk */ + sr32(CM_ICLKEN_PER, 3, 1, 0x1); /* ICKen GPT2 */ + sr32(CM_FCLKEN_PER, 3, 1, 0x1); /* FCKen GPT2 */ + +#ifdef CFG_NS16550 + /* UART1 clocks */ + sr32(CM_FCLKEN1_CORE, 13, 1, 0x1); + sr32(CM_ICLKEN1_CORE, 13, 1, 0x1); + + /* UART 3 Clocks */ + sr32(CM_FCLKEN_PER, 11, 1, 0x1); + sr32(CM_ICLKEN_PER, 11, 1, 0x1); + +#endif + +#ifdef CONFIG_DRIVER_OMAP34XX_I2C + /* Turn on all 3 I2C clocks */ + sr32(CM_FCLKEN1_CORE, 15, 3, 0x7); + sr32(CM_ICLKEN1_CORE, 15, 3, 0x7); /* I2C1,2,3 = on */ +#endif + + /* Enable the ICLK for 32K Sync Timer as its used in udelay */ + sr32(CM_ICLKEN_WKUP, 2, 1, 0x1); + + sr32(CM_FCLKEN_IVA2, 0, 32, FCK_IVA2_ON); + sr32(CM_FCLKEN1_CORE, 0, 32, FCK_CORE1_ON); + sr32(CM_ICLKEN1_CORE, 0, 32, ICK_CORE1_ON); + sr32(CM_ICLKEN2_CORE, 0, 32, ICK_CORE2_ON); + sr32(CM_FCLKEN_WKUP, 0, 32, FCK_WKUP_ON); + sr32(CM_ICLKEN_WKUP, 0, 32, ICK_WKUP_ON); + sr32(CM_FCLKEN_DSS, 0, 32, FCK_DSS_ON); + sr32(CM_ICLKEN_DSS, 0, 32, ICK_DSS_ON); + sr32(CM_FCLKEN_CAM, 0, 32, FCK_CAM_ON); + sr32(CM_ICLKEN_CAM, 0, 32, ICK_CAM_ON); + sr32(CM_FCLKEN_PER, 0, 32, FCK_PER_ON); + sr32(CM_ICLKEN_PER, 0, 32, ICK_PER_ON); + + /* Enable GPIO5 clocks for blinky LEDs */ + sr32(CM_FCLKEN_PER, 16, 1, 0x1); /* FCKen GPIO5 */ + sr32(CM_ICLKEN_PER, 16, 1, 0x1); /* ICKen GPIO5 */ + + delay(1000); +} + +/* Set MUX for UART, GPMC, SDRC, GPIO */ + +#define MUX_VAL(OFFSET,VALUE)\ + __raw_writew((VALUE), OMAP34XX_CTRL_BASE + (OFFSET)); + +#define CP(x) (CONTROL_PADCONF_##x) +/* + * IEN - Input Enable + * IDIS - Input Disable + * PTD - Pull type Down + * PTU - Pull type Up + * DIS - Pull type selection is inactive + * EN - Pull type selection is active + * M0 - Mode 0 + * The commented string gives the final mux configuration for that pin + */ +#define MUX_DEFAULT()\ + MUX_VAL(CP(SDRC_D0), (IEN | PTD | DIS | M0)) /*SDRC_D0*/\ + MUX_VAL(CP(SDRC_D1), (IEN | PTD | DIS | M0)) /*SDRC_D1*/\ + MUX_VAL(CP(SDRC_D2), (IEN | PTD | DIS | M0)) /*SDRC_D2*/\ + MUX_VAL(CP(SDRC_D3), (IEN | PTD | DIS | M0)) /*SDRC_D3*/\ + MUX_VAL(CP(SDRC_D4), (IEN | PTD | DIS | M0)) /*SDRC_D4*/\ + MUX_VAL(CP(SDRC_D5), (IEN | PTD | DIS | M0)) /*SDRC_D5*/\ + MUX_VAL(CP(SDRC_D6), (IEN | PTD | DIS | M0)) /*SDRC_D6*/\ + MUX_VAL(CP(SDRC_D7), (IEN | PTD | DIS | M0)) /*SDRC_D7*/\ + MUX_VAL(CP(SDRC_D8), (IEN | PTD | DIS | M0)) /*SDRC_D8*/\ + MUX_VAL(CP(SDRC_D9), (IEN | PTD | DIS | M0)) /*SDRC_D9*/\ + MUX_VAL(CP(SDRC_D10), (IEN | PTD | DIS | M0)) /*SDRC_D10*/\ + MUX_VAL(CP(SDRC_D11), (IEN | PTD | DIS | M0)) /*SDRC_D11*/\ + MUX_VAL(CP(SDRC_D12), (IEN | PTD | DIS | M0)) /*SDRC_D12*/\ + MUX_VAL(CP(SDRC_D13), (IEN | PTD | DIS | M0)) /*SDRC_D13*/\ + MUX_VAL(CP(SDRC_D14), (IEN | PTD | DIS | M0)) /*SDRC_D14*/\ + MUX_VAL(CP(SDRC_D15), (IEN | PTD | DIS | M0)) /*SDRC_D15*/\ + MUX_VAL(CP(SDRC_D16), (IEN | PTD | DIS | M0)) /*SDRC_D16*/\ + MUX_VAL(CP(SDRC_D17), (IEN | PTD | DIS | M0)) /*SDRC_D17*/\ + MUX_VAL(CP(SDRC_D18), (IEN | PTD | DIS | M0)) /*SDRC_D18*/\ + MUX_VAL(CP(SDRC_D19), (IEN | PTD | DIS | M0)) /*SDRC_D19*/\ + MUX_VAL(CP(SDRC_D20), (IEN | PTD | DIS | M0)) /*SDRC_D20*/\ + MUX_VAL(CP(SDRC_D21), (IEN | PTD | DIS | M0)) /*SDRC_D21*/\ + MUX_VAL(CP(SDRC_D22), (IEN | PTD | DIS | M0)) /*SDRC_D22*/\ + MUX_VAL(CP(SDRC_D23), (IEN | PTD | DIS | M0)) /*SDRC_D23*/\ + MUX_VAL(CP(SDRC_D24), (IEN | PTD | DIS | M0)) /*SDRC_D24*/\ + MUX_VAL(CP(SDRC_D25), (IEN | PTD | DIS | M0)) /*SDRC_D25*/\ + MUX_VAL(CP(SDRC_D26), (IEN | PTD | DIS | M0)) /*SDRC_D26*/\ + MUX_VAL(CP(SDRC_D27), (IEN | PTD | DIS | M0)) /*SDRC_D27*/\ + MUX_VAL(CP(SDRC_D28), (IEN | PTD | DIS | M0)) /*SDRC_D28*/\ + MUX_VAL(CP(SDRC_D29), (IEN | PTD | DIS | M0)) /*SDRC_D29*/\ + MUX_VAL(CP(SDRC_D30), (IEN | PTD | DIS | M0)) /*SDRC_D30*/\ + MUX_VAL(CP(SDRC_D31), (IEN | PTD | DIS | M0)) /*SDRC_D31*/\ + MUX_VAL(CP(SDRC_CLK), (IEN | PTD | DIS | M0)) /*SDRC_CLK*/\ + MUX_VAL(CP(SDRC_DQS0), (IEN | PTD | DIS | M0)) /*SDRC_DQS0*/\ + MUX_VAL(CP(SDRC_DQS1), (IEN | PTD | DIS | M0)) /*SDRC_DQS1*/\ + MUX_VAL(CP(SDRC_DQS2), (IEN | PTD | DIS | M0)) /*SDRC_DQS2*/\ + MUX_VAL(CP(SDRC_DQS3), (IEN | PTD | DIS | M0)) /*SDRC_DQS3*/\ + MUX_VAL(CP(GPMC_A1), (IDIS | PTD | DIS | M0)) /*GPMC_A1*/\ + MUX_VAL(CP(GPMC_A2), (IDIS | PTD | DIS | M0)) /*GPMC_A2*/\ + MUX_VAL(CP(GPMC_A3), (IDIS | PTD | DIS | M0)) /*GPMC_A3*/\ + MUX_VAL(CP(GPMC_A4), (IDIS | PTD | DIS | M0)) /*GPMC_A4*/\ + MUX_VAL(CP(GPMC_A5), (IDIS | PTD | DIS | M0)) /*GPMC_A5*/\ + MUX_VAL(CP(GPMC_A6), (IDIS | PTD | DIS | M0)) /*GPMC_A6*/\ + MUX_VAL(CP(GPMC_A7), (IDIS | PTD | DIS | M0)) /*GPMC_A7*/\ + MUX_VAL(CP(GPMC_A8), (IDIS | PTD | DIS | M0)) /*GPMC_A8*/\ + MUX_VAL(CP(GPMC_A9), (IDIS | PTD | DIS | M0)) /*GPMC_A9*/\ + MUX_VAL(CP(GPMC_A10), (IDIS | PTD | DIS | M0)) /*GPMC_A10*/\ + MUX_VAL(CP(GPMC_D0), (IEN | PTD | DIS | M0)) /*GPMC_D0*/\ + MUX_VAL(CP(GPMC_D1), (IEN | PTD | DIS | M0)) /*GPMC_D1*/\ + MUX_VAL(CP(GPMC_D2), (IEN | PTD | DIS | M0)) /*GPMC_D2*/\ + MUX_VAL(CP(GPMC_D3), (IEN | PTD | DIS | M0)) /*GPMC_D3*/\ + MUX_VAL(CP(GPMC_D4), (IEN | PTD | DIS | M0)) /*GPMC_D4*/\ + MUX_VAL(CP(GPMC_D5), (IEN | PTD | DIS | M0)) /*GPMC_D5*/\ + MUX_VAL(CP(GPMC_D6), (IEN | PTD | DIS | M0)) /*GPMC_D6*/\ + MUX_VAL(CP(GPMC_D7), (IEN | PTD | DIS | M0)) /*GPMC_D7*/\ + MUX_VAL(CP(GPMC_D8), (IEN | PTD | DIS | M0)) /*GPMC_D8*/\ + MUX_VAL(CP(GPMC_D9), (IEN | PTD | DIS | M0)) /*GPMC_D9*/\ + MUX_VAL(CP(GPMC_D10), (IEN | PTD | DIS | M0)) /*GPMC_D10*/\ + MUX_VAL(CP(GPMC_D11), (IEN | PTD | DIS | M0)) /*GPMC_D11*/\ + MUX_VAL(CP(GPMC_D12), (IEN | PTD | DIS | M0)) /*GPMC_D12*/\ + MUX_VAL(CP(GPMC_D13), (IEN | PTD | DIS | M0)) /*GPMC_D13*/\ + MUX_VAL(CP(GPMC_D14), (IEN | PTD | DIS | M0)) /*GPMC_D14*/\ + MUX_VAL(CP(GPMC_D15), (IEN | PTD | DIS | M0)) /*GPMC_D15*/\ + MUX_VAL(CP(GPMC_nCS0), (IDIS | PTU | EN | M0)) /*GPMC_nCS0*/\ + MUX_VAL(CP(GPMC_nCS1), (IDIS | PTU | EN | M0)) /*GPMC_nCS1*/\ + MUX_VAL(CP(GPMC_nCS2), (IDIS | PTU | EN | M0)) /*GPMC_nCS2*/\ + MUX_VAL(CP(GPMC_nCS3), (IDIS | PTU | EN | M0)) /*GPMC_nCS3*/\ + MUX_VAL(CP(GPMC_nCS4), (IDIS | PTU | EN | M0)) /*GPMC_nCS4*/\ + MUX_VAL(CP(GPMC_nCS5), (IDIS | PTU | EN | M0)) /*GPMC_nCS5*/\ + MUX_VAL(CP(GPMC_nCS6), (IDIS | PTU | EN | M0)) /*GPMC_nCS6*/\ + MUX_VAL(CP(GPMC_nCS7), (IDIS | PTU | EN | M0)) /*GPMC_nCS7*/\ + MUX_VAL(CP(GPMC_CLK), (IDIS | PTD | DIS | M0)) /*GPMC_CLK*/\ + MUX_VAL(CP(GPMC_nADV_ALE), (IDIS | PTD | DIS | M0)) /*GPMC_nADV_ALE*/\ + MUX_VAL(CP(GPMC_nOE), (IDIS | PTD | DIS | M0)) /*GPMC_nOE*/\ + MUX_VAL(CP(GPMC_nWE), (IDIS | PTD | DIS | M0)) /*GPMC_nWE*/\ + MUX_VAL(CP(GPMC_nBE0_CLE), (IDIS | PTD | DIS | M0)) /*GPMC_nBE0_CLE*/\ + MUX_VAL(CP(GPMC_nBE1), (IDIS | PTD | DIS | M4)) /*GPIO_61*/\ + MUX_VAL(CP(GPMC_nWP), (IEN | PTD | DIS | M0)) /*GPMC_nWP*/\ + MUX_VAL(CP(GPMC_WAIT0), (IEN | PTU | EN | M0)) /*GPMC_WAIT0*/\ + MUX_VAL(CP(GPMC_WAIT1), (IEN | PTU | EN | M0)) /*GPMC_WAIT1*/\ + MUX_VAL(CP(GPMC_WAIT2), (IEN | PTU | EN | M4)) /*GPIO_64*/\ + MUX_VAL(CP(GPMC_WAIT3), (IEN | PTU | EN | M4)) /*GPIO_65*/\ + MUX_VAL(CP(DSS_DATA18), (IEN | PTD | DIS | M4)) /*GPIO_88*/\ + MUX_VAL(CP(DSS_DATA19), (IEN | PTD | DIS | M4)) /*GPIO_89*/\ + MUX_VAL(CP(DSS_DATA20), (IEN | PTD | DIS | M4)) /*GPIO_90*/\ + MUX_VAL(CP(DSS_DATA21), (IEN | PTD | DIS | M4)) /*GPIO_91*/\ + MUX_VAL(CP(CAM_WEN), (IEN | PTD | DIS | M4)) /*GPIO_167*/\ + MUX_VAL(CP(MMC1_CLK), (IDIS | PTU | EN | M0)) /*MMC1_CLK*/\ + MUX_VAL(CP(MMC1_CMD), (IEN | PTU | EN | M0)) /*MMC1_CMD*/\ + MUX_VAL(CP(MMC1_DAT0), (IEN | PTU | EN | M0)) /*MMC1_DAT0*/\ + MUX_VAL(CP(MMC1_DAT1), (IEN | PTU | EN | M0)) /*MMC1_DAT1*/\ + MUX_VAL(CP(MMC1_DAT2), (IEN | PTU | EN | M0)) /*MMC1_DAT2*/\ + MUX_VAL(CP(MMC1_DAT3), (IEN | PTU | EN | M0)) /*MMC1_DAT3*/\ + MUX_VAL(CP(MMC1_DAT4), (IEN | PTU | EN | M0)) /*MMC1_DAT4*/\ + MUX_VAL(CP(MMC1_DAT5), (IEN | PTU | EN | M0)) /*MMC1_DAT5*/\ + MUX_VAL(CP(MMC1_DAT6), (IEN | PTU | EN | M0)) /*MMC1_DAT6*/\ + MUX_VAL(CP(MMC1_DAT7), (IEN | PTU | EN | M0)) /*MMC1_DAT7*/\ + MUX_VAL(CP(UART1_TX), (IDIS | PTD | DIS | M0)) /*UART1_TX*/\ + MUX_VAL(CP(UART1_RTS), (IDIS | PTD | DIS | M0)) /*UART1_RTS*/\ + MUX_VAL(CP(UART1_CTS), (IEN | PTU | DIS | M0)) /*UART1_CTS*/\ + MUX_VAL(CP(UART1_RX), (IEN | PTD | DIS | M0)) /*UART1_RX*/\ + MUX_VAL(CP(UART3_CTS_RCTX), (IEN | PTD | EN | M0)) /*UART3_CTS_RCTX */\ + MUX_VAL(CP(UART3_RTS_SD), (IDIS | PTD | DIS | M0)) /*UART3_RTS_SD */\ + MUX_VAL(CP(UART3_RX_IRRX), (IEN | PTD | DIS | M0)) /*UART3_RX_IRRX*/\ + MUX_VAL(CP(UART3_TX_IRTX), (IDIS | PTD | DIS | M0)) /*UART3_TX_IRTX*/\ + MUX_VAL(CP(I2C1_SCL), (IEN | PTU | EN | M0)) /*I2C1_SCL*/\ + MUX_VAL(CP(I2C1_SDA), (IEN | PTU | EN | M0)) /*I2C1_SDA*/\ + MUX_VAL(CP(I2C2_SCL), (IEN | PTU | EN | M0)) /*I2C2_SCL*/\ + MUX_VAL(CP(I2C2_SDA), (IEN | PTU | EN | M0)) /*I2C2_SDA*/\ + MUX_VAL(CP(I2C3_SCL), (IEN | PTU | EN | M0)) /*I2C3_SCL*/\ + MUX_VAL(CP(I2C3_SDA), (IEN | PTU | EN | M0)) /*I2C3_SDA*/\ + MUX_VAL(CP(I2C4_SCL), (IEN | PTU | EN | M0)) /*I2C4_SCL*/\ + MUX_VAL(CP(I2C4_SDA), (IEN | PTU | EN | M0)) /*I2C4_SDA*/\ + MUX_VAL(CP(McBSP1_DX), (IEN | PTD | DIS | M4)) /*GPIO_158*/\ + MUX_VAL(CP(SYS_32K), (IEN | PTD | DIS | M0)) /*SYS_32K*/\ + MUX_VAL(CP(SYS_BOOT0), (IEN | PTD | DIS | M4)) /*GPIO_2 */\ + MUX_VAL(CP(SYS_BOOT1), (IEN | PTD | DIS | M4)) /*GPIO_3 */\ + MUX_VAL(CP(SYS_BOOT2), (IEN | PTD | DIS | M4)) /*GPIO_4 */\ + MUX_VAL(CP(SYS_BOOT3), (IEN | PTD | DIS | M4)) /*GPIO_5 */\ + MUX_VAL(CP(SYS_BOOT4), (IEN | PTD | DIS | M4)) /*GPIO_6 */\ + MUX_VAL(CP(SYS_BOOT5), (IEN | PTD | DIS | M4)) /*GPIO_7 */\ + MUX_VAL(CP(SYS_BOOT6), (IEN | PTD | DIS | M4)) /*GPIO_8 */\ + MUX_VAL(CP(SYS_CLKOUT2), (IEN | PTU | EN | M4)) /*GPIO_186*/\ + MUX_VAL(CP(JTAG_nTRST), (IEN | PTD | DIS | M0)) /*JTAG_nTRST*/\ + MUX_VAL(CP(JTAG_TCK), (IEN | PTD | DIS | M0)) /*JTAG_TCK*/\ + MUX_VAL(CP(JTAG_TMS), (IEN | PTD | DIS | M0)) /*JTAG_TMS*/\ + MUX_VAL(CP(JTAG_TDI), (IEN | PTD | DIS | M0)) /*JTAG_TDI*/\ + MUX_VAL(CP(JTAG_EMU0), (IEN | PTD | DIS | M0)) /*JTAG_EMU0*/\ + MUX_VAL(CP(JTAG_EMU1), (IEN | PTD | DIS | M0)) /*JTAG_EMU1*/\ + MUX_VAL(CP(ETK_CLK), (IEN | PTD | DIS | M4)) /*GPIO_12*/\ + MUX_VAL(CP(ETK_CTL), (IEN | PTD | DIS | M4)) /*GPIO_13*/\ + MUX_VAL(CP(ETK_D0), (IEN | PTD | DIS | M4)) /*GPIO_14*/\ + MUX_VAL(CP(ETK_D1), (IEN | PTD | DIS | M4)) /*GPIO_15*/\ + MUX_VAL(CP(ETK_D2), (IEN | PTD | DIS | M4)) /*GPIO_16*/\ + MUX_VAL(CP(ETK_D10), (IEN | PTD | DIS | M4)) /*GPIO_24*/\ + MUX_VAL(CP(ETK_D11), (IEN | PTD | DIS | M4)) /*GPIO_25*/\ + MUX_VAL(CP(ETK_D12), (IEN | PTD | DIS | M4)) /*GPIO_26*/\ + MUX_VAL(CP(ETK_D13), (IEN | PTD | DIS | M4)) /*GPIO_27*/\ + MUX_VAL(CP(ETK_D14), (IEN | PTD | DIS | M4)) /*GPIO_28*/\ + MUX_VAL(CP(ETK_D15), (IEN | PTD | DIS | M4)) /*GPIO_29*/ + +/********************************************************** + * Routine: set_muxconf_regs + * Description: Setting up the configuration Mux registers + * specific to the hardware. Many pins need + * to be moved from protect to primary mode. + *********************************************************/ +void set_muxconf_regs(void) +{ + MUX_DEFAULT(); +} + +/********************************************************** + * Routine: nand+_init + * Description: Set up nand for nand and jffs2 commands + *********************************************************/ + +int nand_init(void) +{ + /* global settings */ + __raw_writel(0x10, GPMC_SYSCONFIG); /* smart idle */ + __raw_writel(0x0, GPMC_IRQENABLE); /* isr's sources masked */ + __raw_writel(0, GPMC_TIMEOUT_CONTROL);/* timeout disable */ + + /* Set the GPMC Vals, NAND is mapped at CS0, oneNAND at CS0. + * We configure only GPMC CS0 with required values. Configiring other devices + * at other CS is done in u-boot. So we don't have to bother doing it here. + */ + __raw_writel(0 , GPMC_CONFIG7 + GPMC_CONFIG_CS0); + delay(1000); + + if ((get_mem_type() == GPMC_NAND) || (get_mem_type() == MMC_NAND)) { + __raw_writel(M_NAND_GPMC_CONFIG1, GPMC_CONFIG1 + GPMC_CONFIG_CS0); + __raw_writel(M_NAND_GPMC_CONFIG2, GPMC_CONFIG2 + GPMC_CONFIG_CS0); + __raw_writel(M_NAND_GPMC_CONFIG3, GPMC_CONFIG3 + GPMC_CONFIG_CS0); + __raw_writel(M_NAND_GPMC_CONFIG4, GPMC_CONFIG4 + GPMC_CONFIG_CS0); + __raw_writel(M_NAND_GPMC_CONFIG5, GPMC_CONFIG5 + GPMC_CONFIG_CS0); + __raw_writel(M_NAND_GPMC_CONFIG6, GPMC_CONFIG6 + GPMC_CONFIG_CS0); + + /* Enable the GPMC Mapping */ + __raw_writel((((OMAP34XX_GPMC_CS0_SIZE & 0xF)<<8) | + ((NAND_BASE_ADR>>24) & 0x3F) | + (1<<6)), (GPMC_CONFIG7 + GPMC_CONFIG_CS0)); + delay(2000); + + if (nand_chip()) { +#ifdef CFG_PRINTF + printf("Unsupported Chip!\n"); +#endif + return 1; + } + + } + + if ((get_mem_type() == GPMC_ONENAND) || (get_mem_type() == MMC_ONENAND)) { + __raw_writel(ONENAND_GPMC_CONFIG1, GPMC_CONFIG1 + GPMC_CONFIG_CS0); + __raw_writel(ONENAND_GPMC_CONFIG2, GPMC_CONFIG2 + GPMC_CONFIG_CS0); + __raw_writel(ONENAND_GPMC_CONFIG3, GPMC_CONFIG3 + GPMC_CONFIG_CS0); + __raw_writel(ONENAND_GPMC_CONFIG4, GPMC_CONFIG4 + GPMC_CONFIG_CS0); + __raw_writel(ONENAND_GPMC_CONFIG5, GPMC_CONFIG5 + GPMC_CONFIG_CS0); + __raw_writel(ONENAND_GPMC_CONFIG6, GPMC_CONFIG6 + GPMC_CONFIG_CS0); + + /* Enable the GPMC Mapping */ + __raw_writel((((OMAP34XX_GPMC_CS0_SIZE & 0xF)<<8) | + ((ONENAND_BASE>>24) & 0x3F) | + (1<<6)), (GPMC_CONFIG7 + GPMC_CONFIG_CS0)); + delay(2000); + + if (onenand_chip()) { +#ifdef CFG_PRINTF + printf("OneNAND Unsupported !\n"); +#endif + return 1; + } + } + return 0; +} + +/* optionally do something like blinking LED */ +void board_hang(void) +{ + while (0) + ; +} + +/****************************************************************************** + * Dummy function to handle errors for EABI incompatibility + *****************************************************************************/ +void raise(void) +{ +} + +/****************************************************************************** + * Dummy function to handle errors for EABI incompatibility + *****************************************************************************/ +void abort(void) +{ +} diff --git a/x-loader/board/overo/platform.S b/x-loader/board/overo/platform.S new file mode 100644 index 0000000..5869270 --- /dev/null +++ b/x-loader/board/overo/platform.S @@ -0,0 +1,360 @@ +/* + * Board specific setup info + * + * (C) Copyright 2004-2006 + * Texas Instruments, <www.ti.com> + * Richard Woodruff <r-woodruff2@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <asm/arch/cpu.h> +#include <asm/arch/mem.h> +#include <asm/arch/clocks.h> + +_TEXT_BASE: + .word TEXT_BASE /* sdram load addr from config.mk */ + +#if !defined(CFG_NAND_BOOT) && !defined(CFG_NAND_BOOT) +/************************************************************************** + * cpy_clk_code: relocates clock code into SRAM where its safer to execute + * R1 = SRAM destination address. + *************************************************************************/ +.global cpy_clk_code + cpy_clk_code: + /* Copy DPLL code into SRAM */ + adr r0, go_to_speed /* get addr of clock setting code */ + mov r2, #384 /* r2 size to copy (div by 32 bytes) */ + mov r1, r1 /* r1 <- dest address (passed in) */ + add r2, r2, r0 /* r2 <- source end address */ +next2: + ldmia r0!, {r3-r10} /* copy from source address [r0] */ + stmia r1!, {r3-r10} /* copy to target address [r1] */ + cmp r0, r2 /* until source end address [r2] */ + bne next2 + mov pc, lr /* back to caller */ + +/* **************************************************************************** + * NOTE: 3430 X-loader currently does not use this code. +* It could be removed its is kept for compatabily with u-boot. + * + * go_to_speed: -Moves to bypass, -Commits clock dividers, -puts dpll at speed + * -executed from SRAM. + * R0 = CM_CLKEN_PLL-bypass value + * R1 = CM_CLKSEL1_PLL-m, n, and divider values + * R2 = CM_CLKSEL_CORE-divider values + * R3 = CM_IDLEST_CKGEN - addr dpll lock wait + * + * Note: If core unlocks/relocks and SDRAM is running fast already it gets + * confused. A reset of the controller gets it back. Taking away its + * L3 when its not in self refresh seems bad for it. Normally, this code + * runs from flash before SDR is init so that should be ok. + ******************************************************************************/ +.global go_to_speed + go_to_speed: + stmfd sp!, {r4-r6} + + /* move into fast relock bypass */ + ldr r4, pll_ctl_add + str r0, [r4] +wait1: + ldr r5, [r3] /* get status */ + and r5, r5, #0x1 /* isolate core status */ + cmp r5, #0x1 /* still locked? */ + beq wait1 /* if lock, loop */ + + /* set new dpll dividers _after_ in bypass */ + ldr r5, pll_div_add1 + str r1, [r5] /* set m, n, m2 */ + ldr r5, pll_div_add2 + str r2, [r5] /* set l3/l4/.. dividers*/ + ldr r5, pll_div_add3 /* wkup */ + ldr r2, pll_div_val3 /* rsm val */ + str r2, [r5] + ldr r5, pll_div_add4 /* gfx */ + ldr r2, pll_div_val4 + str r2, [r5] + ldr r5, pll_div_add5 /* emu */ + ldr r2, pll_div_val5 + str r2, [r5] + + /* now prepare GPMC (flash) for new dpll speed */ + /* flash needs to be stable when we jump back to it */ + ldr r5, flash_cfg3_addr + ldr r2, flash_cfg3_val + str r2, [r5] + ldr r5, flash_cfg4_addr + ldr r2, flash_cfg4_val + str r2, [r5] + ldr r5, flash_cfg5_addr + ldr r2, flash_cfg5_val + str r2, [r5] + ldr r5, flash_cfg1_addr + ldr r2, [r5] + orr r2, r2, #0x3 /* up gpmc divider */ + str r2, [r5] + + /* lock DPLL3 and wait a bit */ + orr r0, r0, #0x7 /* set up for lock mode */ + str r0, [r4] /* lock */ + nop /* ARM slow at this point working at sys_clk */ + nop + nop + nop +wait2: + ldr r5, [r3] /* get status */ + and r5, r5, #0x1 /* isolate core status */ + cmp r5, #0x1 /* still locked? */ + bne wait2 /* if lock, loop */ + nop + nop + nop + nop + ldmfd sp!, {r4-r6} + mov pc, lr /* back to caller, locked */ + +_go_to_speed: .word go_to_speed + +/* these constants need to be close for PIC code */ +/* The Nor has to be in the Flash Base CS0 for this condition to happen */ +flash_cfg1_addr: + .word (GPMC_CONFIG_CS0 + GPMC_CONFIG1) +flash_cfg3_addr: + .word (GPMC_CONFIG_CS0 + GPMC_CONFIG3) +flash_cfg3_val: + .word STNOR_GPMC_CONFIG3 +flash_cfg4_addr: + .word (GPMC_CONFIG_CS0 + GPMC_CONFIG4) +flash_cfg4_val: + .word STNOR_GPMC_CONFIG4 +flash_cfg5_val: + .word STNOR_GPMC_CONFIG5 +flash_cfg5_addr: + .word (GPMC_CONFIG_CS0 + GPMC_CONFIG5) +pll_ctl_add: + .word CM_CLKEN_PLL +pll_div_add1: + .word CM_CLKSEL1_PLL +pll_div_add2: + .word CM_CLKSEL_CORE +pll_div_add3: + .word CM_CLKSEL_WKUP +pll_div_val3: + .word (WKUP_RSM << 1) +pll_div_add4: + .word CM_CLKSEL_GFX +pll_div_val4: + .word (GFX_DIV << 0) +pll_div_add5: + .word CM_CLKSEL1_EMU +pll_div_val5: + .word CLSEL1_EMU_VAL + +#endif + +.globl lowlevel_init +lowlevel_init: + ldr sp, SRAM_STACK + str ip, [sp] /* stash old link register */ + mov ip, lr /* save link reg across call */ + bl s_init /* go setup pll,mux,memory */ + ldr ip, [sp] /* restore save ip */ + mov lr, ip /* restore link reg */ + + /* back to arch calling code */ + mov pc, lr + + /* the literal pools origin */ + .ltorg + +REG_CONTROL_STATUS: + .word CONTROL_STATUS +SRAM_STACK: + .word LOW_LEVEL_SRAM_STACK + +/* DPLL(1-4) PARAM TABLES */ +/* Each of the tables has M, N, FREQSEL, M2 values defined for nominal + * OPP (1.2V). The fields are defined according to dpll_param struct(clock.c). + * The values are defined for all possible sysclk and for ES1 and ES2. + */ + +mpu_dpll_param: +/* 12MHz */ +/* ES1 */ +.word 0x0FE,0x07,0x05,0x01 +/* ES2 */ +.word 0x0FA,0x05,0x07,0x01 +/* 3410 */ +.word 0x085,0x05,0x07,0x01 + +/* 13MHz */ +/* ES1 */ +.word 0x17D,0x0C,0x03,0x01 +/* ES2 */ +.word 0x1F4,0x0C,0x03,0x01 +/* 3410 */ +.word 0x10A,0x0C,0x03,0x01 + +/* 19.2MHz */ +/* ES1 */ +.word 0x179,0x12,0x04,0x01 +/* ES2 */ +.word 0x271,0x17,0x03,0x01 +/* 3410 */ +.word 0x14C,0x17,0x03,0x01 + +/* 26MHz */ +/* ES1 */ +.word 0x17D,0x19,0x03,0x01 +/* ES2 */ +.word 0x0FA,0x0C,0x07,0x01 +/* 3410 */ +.word 0x085,0x0C,0x07,0x01 + +/* 38.4MHz */ +/* ES1 */ +.word 0x1FA,0x32,0x03,0x01 +/* ES2 */ +.word 0x271,0x2F,0x03,0x01 +/* 3410 */ +.word 0x14C,0x2F,0x03,0x01 + + +.globl get_mpu_dpll_param +get_mpu_dpll_param: + adr r0, mpu_dpll_param + mov pc, lr + +iva_dpll_param: +/* 12MHz */ +/* ES1 */ +.word 0x07D,0x05,0x07,0x01 +/* ES2 */ +.word 0x0B4,0x05,0x07,0x01 +/* 3410 */ +.word 0x085,0x05,0x07,0x01 + +/* 13MHz */ +/* ES1 */ +.word 0x0FA,0x0C,0x03,0x01 +/* ES2 */ +.word 0x168,0x0C,0x03,0x01 +/* 3410 */ +.word 0x10A,0x0C,0x03,0x01 + +/* 19.2MHz */ +/* ES1 */ +.word 0x082,0x09,0x07,0x01 +/* ES2 */ +.word 0x0E1,0x0B,0x06,0x01 +/* 3410 */ +.word 0x14C,0x17,0x03,0x01 + +/* 26MHz */ +/* ES1 */ +.word 0x07D,0x0C,0x07,0x01 +/* ES2 */ +.word 0x0B4,0x0C,0x07,0x01 +/* 3410 */ +.word 0x085,0x0C,0x07,0x01 + +/* 38.4MHz */ +/* ES1 */ +.word 0x13F,0x30,0x03,0x01 +/* ES2 */ +.word 0x0E1,0x17,0x06,0x01 +/* 3410 */ +.word 0x14C,0x2F,0x03,0x01 + + +.globl get_iva_dpll_param +get_iva_dpll_param: + adr r0, iva_dpll_param + mov pc, lr + +/* Core DPLL targets for L3 at 166 & L133 */ +core_dpll_param: +/* 12MHz */ +/* ES1 */ +.word M_12_ES1,M_12_ES1,FSL_12_ES1,M2_12_ES1 +/* ES2 */ +.word M_12,N_12,FSEL_12,M2_12 +/* 3410 */ +.word M_12,N_12,FSEL_12,M2_12 + +/* 13MHz */ +/* ES1 */ +.word M_13_ES1,N_13_ES1,FSL_13_ES1,M2_13_ES1 +/* ES2 */ +.word M_13,N_13,FSEL_13,M2_13 +/* 3410 */ +.word M_13,N_13,FSEL_13,M2_13 + +/* 19.2MHz */ +/* ES1 */ +.word M_19p2_ES1,N_19p2_ES1,FSL_19p2_ES1,M2_19p2_ES1 +/* ES2 */ +.word M_19p2,N_19p2,FSEL_19p2,M2_19p2 +/* 3410 */ +.word M_19p2,N_19p2,FSEL_19p2,M2_19p2 + +/* 26MHz */ +/* ES1 */ +.word M_26_ES1,N_26_ES1,FSL_26_ES1,M2_26_ES1 +/* ES2 */ +.word M_26,N_26,FSEL_26,M2_26 +/* 3410 */ +.word M_26,N_26,FSEL_26,M2_26 + +/* 38.4MHz */ +/* ES1 */ +.word M_38p4_ES1,N_38p4_ES1,FSL_38p4_ES1,M2_38p4_ES1 +/* ES2 */ +.word M_38p4,N_38p4,FSEL_38p4,M2_38p4 +/* 3410 */ +.word M_38p4,N_38p4,FSEL_38p4,M2_38p4 + +.globl get_core_dpll_param +get_core_dpll_param: + adr r0, core_dpll_param + mov pc, lr + +/* PER DPLL values are same for both ES1 and ES2 */ +per_dpll_param: +/* 12MHz */ +.word 0xD8,0x05,0x07,0x09 + +/* 13MHz */ +.word 0x1B0,0x0C,0x03,0x09 + +/* 19.2MHz */ +.word 0xE1,0x09,0x07,0x09 + +/* 26MHz */ +.word 0xD8,0x0C,0x07,0x09 + +/* 38.4MHz */ +.word 0xE1,0x13,0x07,0x09 + +.globl get_per_dpll_param +get_per_dpll_param: + adr r0, per_dpll_param + mov pc, lr + diff --git a/x-loader/board/overo/x-load.lds b/x-loader/board/overo/x-load.lds new file mode 100644 index 0000000..5f352d3 --- /dev/null +++ b/x-loader/board/overo/x-load.lds @@ -0,0 +1,54 @@ +/* + * November 2006 - Changed to support 3430sdp device + * Copyright (c) 2004-2006 Texas Instruments + * + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, <gj@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + . = 0x00000000; + + . = ALIGN(4); + .text : + { + cpu/omap3/start.o (.text) + *(.text) + } + + . = ALIGN(4); + .rodata : { *(.rodata) } + + . = ALIGN(4); + .data : { *(.data) } + + . = ALIGN(4); + .got : { *(.got) } + + . = ALIGN(4); + __bss_start = .; + .bss : { *(.bss) } + _end = .; +} |