auto import from //depot/cupcake/@135843

1 files changed, 204 insertions, 0 deletions

diff --git a/core/cleanbuild.mk b/core/cleanbuild.mk
new file mode 100644
index 0000000..50b56f9
--- /dev/null
+++ b/core/cleanbuild.mk
@@ -0,0 +1,204 @@
+# Copyright (C) 2007 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+INTERNAL_CLEAN_STEPS :=
+
+# Builds up a list of clean steps.  Creates a unique
+# id for each step by taking INTERNAL_CLEAN_BUILD_VERSION
+# and appending an increasing number of '@' characters.
+#
+# $(1): shell command to run
+define _add-clean-step
+  $(if $(strip $(INTERNAL_CLEAN_BUILD_VERSION)),, \
+      $(error INTERNAL_CLEAN_BUILD_VERSION not set))
+  $(eval _acs_id := $(strip $(lastword $(INTERNAL_CLEAN_STEPS))))
+  $(if $(_acs_id),,$(eval _acs_id := $(INTERNAL_CLEAN_BUILD_VERSION)))
+  $(eval _acs_id := $(_acs_id)@)
+  $(eval INTERNAL_CLEAN_STEPS += $(_acs_id))
+  $(eval INTERNAL_CLEAN_STEP.$(_acs_id) := $(1))
+  $(eval _acs_id :=)
+endef
+define add-clean-step
+$(if $(call _add-clean-step,$(1)),)
+endef
+
+# Defines INTERNAL_CLEAN_BUILD_VERSION and the individual clean steps.
+# cleanspec.mk is outside of the core directory so that more people
+# can have permission to touch it.
+include build/cleanspec.mk
+INTERNAL_CLEAN_BUILD_VERSION := $(strip $(INTERNAL_CLEAN_BUILD_VERSION))
+
+# If the clean_steps.mk file is missing (usually after a clean build)
+# then we won't do anything.
+CURRENT_CLEAN_BUILD_VERSION := $(INTERNAL_CLEAN_BUILD_VERSION)
+CURRENT_CLEAN_STEPS := $(INTERNAL_CLEAN_STEPS)
+
+# Read the current state from the file, if present.
+# Will set CURRENT_CLEAN_BUILD_VERSION and CURRENT_CLEAN_STEPS.
+#
+clean_steps_file := $(PRODUCT_OUT)/clean_steps.mk
+-include $(clean_steps_file)
+
+ifneq ($(CURRENT_CLEAN_BUILD_VERSION),$(INTERNAL_CLEAN_BUILD_VERSION))
+  # The major clean version is out-of-date.  Do a full clean, and
+  # don't even bother with the clean steps.
+  $(info *** A clean build is required because of a recent change.)
+  $(shell rm -rf $(OUT_DIR))
+  $(info *** Done with the cleaning, now starting the real build.)
+else
+  # The major clean version is correct.  Find the list of clean steps
+  # that we need to execute to get up-to-date.
+  steps := \
+      $(filter-out $(CURRENT_CLEAN_STEPS),$(INTERNAL_CLEAN_STEPS))
+  $(foreach step,$(steps), \
+    $(info Clean step: $(INTERNAL_CLEAN_STEP.$(step))) \
+    $(shell $(INTERNAL_CLEAN_STEP.$(step))) \
+   )
+  steps :=
+endif
+CURRENT_CLEAN_BUILD_VERSION :=
+CURRENT_CLEAN_STEPS :=
+
+# Write the new state to the file.
+#
+$(shell \
+  mkdir -p $(dir $(clean_steps_file)) && \
+  echo "CURRENT_CLEAN_BUILD_VERSION := $(INTERNAL_CLEAN_BUILD_VERSION)" > \
+      $(clean_steps_file) ;\
+  echo "CURRENT_CLEAN_STEPS := $(INTERNAL_CLEAN_STEPS)" >> \
+      $(clean_steps_file) \
+ )
+
+clean_steps_file :=
+INTERNAL_CLEAN_STEPS :=
+INTERNAL_CLEAN_BUILD_VERSION :=
+
+
+# Since products and build variants (unfortunately) share the same
+# PRODUCT_OUT staging directory, things can get out of sync if different
+# build configurations are built in the same tree.  The following logic
+# will notice when the configuration has changed and remove the files
+# necessary to keep things consistent.
+
+previous_build_config_file := $(PRODUCT_OUT)/previous_build_config.mk
+
+# TODO: this special case for the sdk is only necessary while "sdk"
+# is a valid make target.  Eventually, it will just be a product, at
+# which point TARGET_PRODUCT will handle it and we can avoid this check
+# of MAKECMDGOALS.  The "addprefix" is just to keep things pretty.
+ifneq ($(TARGET_PRODUCT),sdk)
+  building_sdk := $(addprefix -,$(filter sdk,$(MAKECMDGOALS)))
+else
+  # Don't bother with this extra part when explicitly building the sdk product.
+  building_sdk :=
+endif
+
+# A change in the list of locales warrants an installclean, too.
+locale_list := $(subst $(space),$(comma),$(strip $(PRODUCT_LOCALES)))
+
+current_build_config := \
+    $(TARGET_PRODUCT)-$(TARGET_BUILD_VARIANT)$(building_sdk)-{$(locale_list)}
+building_sdk :=
+locale_list :=
+force_installclean := false
+
+# Read the current state from the file, if present.
+# Will set PREVIOUS_BUILD_CONFIG.
+#
+PREVIOUS_BUILD_CONFIG :=
+-include $(previous_build_config_file)
+PREVIOUS_BUILD_CONFIG := $(strip $(PREVIOUS_BUILD_CONFIG))
+ifdef PREVIOUS_BUILD_CONFIG
+  ifneq "$(current_build_config)" "$(PREVIOUS_BUILD_CONFIG)"
+    $(info *** Build configuration changed: "$(PREVIOUS_BUILD_CONFIG)" -> "$(current_build_config)")
+    ifneq ($(DISABLE_AUTO_INSTALLCLEAN),true)
+      force_installclean := true
+    else
+      $(info DISABLE_AUTO_INSTALLCLEAN is set; skipping auto-clean. Your tree may be in an inconsistent state.)
+    endif
+  endif
+endif  # else, this is the first build, so no need to clean.
+PREVIOUS_BUILD_CONFIG :=
+
+# Write the new state to the file.
+#
+$(shell \
+  mkdir -p $(dir $(previous_build_config_file)) && \
+  echo "PREVIOUS_BUILD_CONFIG := $(current_build_config)" > \
+      $(previous_build_config_file) \
+ )
+previous_build_config_file :=
+current_build_config :=
+
+#
+# installclean logic
+#
+
+# The files/dirs to delete during an installclean.  This includes the
+# non-common APPS directory, which may contain the wrong resources.
+# Use "./" in front of the paths to avoid accidentally deleting random
+# parts of the filesystem if any of the *_OUT vars resolve to blank.
+#
+# Deletes all of the files that change between different build types,
+# like "make user" vs. "make sdk".  This lets you work with different
+# build types without having to do a full clean each time.  E.g.:
+#
+#     $ make -j8 all
+#     $ make installclean
+#     $ make -j8 user
+#     $ make installclean
+#     $ make -j8 sdk
+#
+installclean_files := \
+	./$(HOST_OUT)/obj/NOTICE_FILES \
+	./$(HOST_OUT)/sdk \
+	./$(PRODUCT_OUT)/*.img \
+	./$(PRODUCT_OUT)/*.txt \
+	./$(PRODUCT_OUT)/*.xlb \
+	./$(PRODUCT_OUT)/*.zip \
+	./$(PRODUCT_OUT)/data \
+	./$(PRODUCT_OUT)/obj/APPS \
+	./$(PRODUCT_OUT)/obj/NOTICE_FILES \
+	./$(PRODUCT_OUT)/obj/PACKAGING \
+	./$(PRODUCT_OUT)/recovery \
+	./$(PRODUCT_OUT)/root \
+	./$(PRODUCT_OUT)/system
+
+# The files/dirs to delete during a dataclean, which removes any files
+# in the staging and emulator data partitions.
+dataclean_files := \
+	./$(PRODUCT_OUT)/data/* \
+	./$(PRODUCT_OUT)/data-qemu/* \
+	./$(PRODUCT_OUT)/userdata-qemu.img
+
+# Define the rules for commandline invocation.
+.PHONY: dataclean
+dataclean: FILES := $(dataclean_files)
+dataclean:
+	$(hide) rm -rf $(FILES)
+	@echo "Deleted emulator userdata images."
+
+.PHONY: installclean
+installclean: FILES := $(installclean_files)
+installclean: dataclean
+	$(hide) rm -rf $(FILES)
+	@echo "Deleted images and staging directories."
+
+ifeq "$(force_installclean)" "true"
+  $(info *** Forcing "make installclean"...)
+  $(shell rm -rf $(dataclean_files) $(installclean_files))
+  $(info *** Done with the cleaning, now starting the real build.)
+endif
+force_installclean :=