aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--CHANGES.TXT3
-rw-r--r--android/avd/info.c62
-rw-r--r--android/avd/info.h1
-rw-r--r--android/cmdline-options.h1
-rw-r--r--android/console.c135
-rw-r--r--android/help.c22
-rw-r--r--android/main.c36
-rw-r--r--hw/android_arm.c21
-rw-r--r--hw/goldfish_device.h7
-rw-r--r--hw/goldfish_mmc.c85
-rw-r--r--sysemu.h3
-rw-r--r--vl-android.c45
12 files changed, 376 insertions, 45 deletions
diff --git a/CHANGES.TXT b/CHANGES.TXT
index 35a519b..08099f0 100644
--- a/CHANGES.TXT
+++ b/CHANGES.TXT
@@ -31,6 +31,9 @@ IMPORTANT CHANGES:
The minor number will now be stuck to 0 since each official emulator
release is supposed to match a corresponding SDK Tools release.
+- Added a new option -sdcard2 <file> to be able to use two SD Card images
+ at once. Note that this requires an updated emulator-specific kernel
+ and system image. It will thus be ignored by older emulated platforms.
OTHER:
diff --git a/android/avd/info.c b/android/avd/info.c
index e738065..6766c96 100644
--- a/android/avd/info.c
+++ b/android/avd/info.c
@@ -92,6 +92,12 @@ AvdInfo* android_avdInfo;
*/
#define SDCARD_PATH "sdcard.path"
+/* the config.ini key that is used to indicate the absolute path
+ * to the second SD Card image file, if you don't want to place it in
+ * the content directory.
+ */
+#define SDCARD2_PATH "sdcard2.path"
+
/* certain disk image files are mounted read/write by the emulator
* to ensure that several emulators referencing the same files
* do not corrupt these files, we need to lock them and respond
@@ -675,7 +681,26 @@ EXIT:
return l->pPath[0];
}
+static void _sdcardLoadImages(ImageLoader* l, AvdInfo* i, AvdInfoParams* params, AvdImageType sdcardImage)
+{
+ imageLoader_set(l, sdcardImage);
+ imageLoader_load(l, IMAGE_OPTIONAL |
+ IMAGE_IGNORE_IF_LOCKED);
+ /* if the file was not found, ignore it */
+ if (l->pPath[0] && !path_exists(l->pPath[0]))
+ {
+ D("ignoring non-existing %s at %s: %s",
+ l->imageText, l->pPath[0], strerror(errno));
+
+ /* if the user provided the SD Card path by hand,
+ * warn him. */
+ if (params->forcePaths[sdcardImage] != NULL)
+ dwarning("ignoring non-existing SD Card image");
+
+ imageLoader_setPath(l, NULL);
+ }
+}
/* find the correct path of all image files we're going to need
* and lock the files that need it.
@@ -772,23 +797,8 @@ _getImagePaths(AvdInfo* i, AvdInfoParams* params )
* already used, we must ignore it.
*/
if (!noSdCard) {
- imageLoader_set (l, AVD_IMAGE_SDCARD);
- imageLoader_load(l, IMAGE_OPTIONAL |
- IMAGE_IGNORE_IF_LOCKED);
-
- /* if the file was not found, ignore it */
- if (l->pPath[0] && !path_exists(l->pPath[0]))
- {
- D("ignoring non-existing %s at %s: %s",
- l->imageText, l->pPath[0], strerror(errno));
-
- /* if the user provided the SD Card path by hand,
- * warn him. */
- if (params->forcePaths[AVD_IMAGE_SDCARD] != NULL)
- dwarning("ignoring non-existing SD Card image");
-
- imageLoader_setPath(l, NULL);
- }
+ _sdcardLoadImages(l, i, params, AVD_IMAGE_SDCARD);
+ _sdcardLoadImages(l, i, params, AVD_IMAGE_SDCARD2);
}
return 0;
@@ -1043,22 +1053,24 @@ _getSkin( AvdInfo* i, AvdInfoParams* params )
}
/* If the user didn't explicitely provide an SD Card path,
- * check the SDCARD_PATH key in config.ini and use that if
+ * check the specfied key in config.ini and use that if
* available.
*/
static void
-_getSDCardPath( AvdInfo* i, AvdInfoParams* params )
+_getSDCardPath(AvdInfo* i, AvdInfoParams* params, AvdImageType sdcardImage,
+ const char* iniKey )
{
const char* path;
- if (params->forcePaths[AVD_IMAGE_SDCARD] != NULL)
+ if (params->forcePaths[sdcardImage] != NULL) {
return;
+ }
- path = iniFile_getString(i->configIni, SDCARD_PATH);
+ path = iniFile_getString(i->configIni, iniKey);
if (path == NULL)
return;
- params->forcePaths[AVD_IMAGE_SDCARD] = path;
+ params->forcePaths[sdcardImage] = path;
}
AvdInfo*
@@ -1087,7 +1099,8 @@ avdInfo_new( const char* name, AvdInfoParams* params )
* obsolete SDKs.
*/
_getSearchPaths(i);
- _getSDCardPath(i, params);
+ _getSDCardPath(i, params, AVD_IMAGE_SDCARD, SDCARD_PATH);
+ _getSDCardPath(i, params, AVD_IMAGE_SDCARD2, SDCARD2_PATH);
/* don't need this anymore */
iniFile_free(i->rootIni);
@@ -1255,6 +1268,9 @@ _getBuildImagePaths( AvdInfo* i, AvdInfoParams* params )
if (!noSdCard) {
imageLoader_set (l, AVD_IMAGE_SDCARD);
imageLoader_load(l, IMAGE_OPTIONAL | IMAGE_IGNORE_IF_LOCKED);
+
+ imageLoader_set (l, AVD_IMAGE_SDCARD2);
+ imageLoader_load(l, IMAGE_OPTIONAL | IMAGE_IGNORE_IF_LOCKED);
}
return 0;
diff --git a/android/avd/info.h b/android/avd/info.h
index 19df807..75dab89 100644
--- a/android/avd/info.h
+++ b/android/avd/info.h
@@ -58,6 +58,7 @@
_AVD_IMG(USERDATA,"userdata-qemu.img", "user data") \
_AVD_IMG(CACHE,"cache.img","cache") \
_AVD_IMG(SDCARD,"sdcard.img","SD Card") \
+ _AVD_IMG(SDCARD2,"sdcard2.img","SD Card 2") \
/* define the enumared values corresponding to each AVD image type
* examples are: AVD_IMAGE_KERNEL, AVD_IMAGE_SYSTEM, etc..
diff --git a/android/cmdline-options.h b/android/cmdline-options.h
index 6a4e7ff..fabac5c 100644
--- a/android/cmdline-options.h
+++ b/android/cmdline-options.h
@@ -76,6 +76,7 @@ CFG_PARAM( cache, "<file>", "cache partition image (default is temporary file
CFG_FLAG ( no_cache, "disable the cache partition" )
CFG_FLAG ( nocache, "same as -no-cache" )
OPT_PARAM( sdcard, "<file>", "SD card image (default <system>/sdcard.img")
+OPT_PARAM( sdcard2, "<file>", "SD card 2 image (default <system>/sdcard2.img")
OPT_FLAG ( wipe_data, "reset the use data image (copy it from initdata)" )
CFG_PARAM( avd, "<name>", "use a specific android virtual device" )
CFG_PARAM( skindir, "<dir>", "search skins in <dir> (default <system>/skins)" )
diff --git a/android/console.c b/android/console.c
index ab32213..45da8aa 100644
--- a/android/console.c
+++ b/android/console.c
@@ -31,6 +31,8 @@
#include "hw/power_supply.h"
#include "shaper.h"
#include "modem_driver.h"
+#include "block.h"
+#include "block_int.h"
#include "android/gps.h"
#include "android/globals.h"
#include "android/utils/bufprint.h"
@@ -2066,6 +2068,135 @@ static const CommandDefRec geo_commands[] =
/********************************************************************************************/
/********************************************************************************************/
/***** ******/
+/***** S D C A R D C O M M A N D S ******/
+/***** ******/
+/********************************************************************************************/
+/********************************************************************************************/
+
+static int
+do_sdcard_insert( ControlClient client, char* args )
+{
+ char img[255];
+ char *p;
+ int n;
+ int drv_idx;
+
+ if (!args) {
+ control_write( client, "K0: argument missing, try 'sdcard insert <slot #> [imagefile]'\r\n" );
+ return -1;
+ }
+
+ memset(img, 0, sizeof(img));
+
+ n = strtoul(args, &p, 0);
+ if (n > 2) {
+ control_write( client, "K0: argument out of range\r\n" );
+ return -1;
+ }
+
+ if (p) {
+ p++;
+ strncpy(img, p, sizeof(img) -1);
+ }
+
+ if (goldfish_mmc_is_media_inserted(n)) {
+ control_write( client, "K0: Slot %d already has media inserted\r\n", n );
+ return -1;
+ }
+
+ drv_idx = drive_get_index( IF_IDE, 0, n);
+ if (drv_idx >= 0) {
+ if (img[0] != '\0' && strcmp(img, drives_table[drv_idx].bdrv->filename)) {
+ if (drive_swap(drives_table[drv_idx].bdrv, img)) {
+ control_write (client, "K0: Drive swap failed\r\n");
+ return -1;
+ }
+ }
+ } else {
+ drv_idx = drive_hotadd(img, "index=%d,media=disk", n);
+ if (drv_idx < 0) {
+ control_write (client, "K0: Drive hot-add failed\r\n");
+ return -1;
+ }
+ }
+
+ goldfish_mmc_insert(n, drives_table[drv_idx].bdrv);
+
+ return 0;
+}
+
+static int
+do_sdcard_remove( ControlClient client, char* args )
+{
+ int n;
+ int ins;
+
+ if (!args) {
+ control_write( client, "K0: argument missing, try 'sdcard remove <slot #>'\r\n" );
+ return -1;
+ }
+
+ n = atoi(args);
+
+ if ((ins = goldfish_mmc_is_media_inserted(n)) < 0) {
+ control_write( client, "K0: Slot %d is invalid\r\n", n );
+ } else if (!ins) {
+ control_write( client, "K0: Slot %d has no media\r\n", n );
+ return -1;
+ }
+
+ goldfish_mmc_remove(n);
+ return 0;
+}
+
+static int
+do_sdcard_status( ControlClient client, char* args )
+{
+ int i;
+ control_write( client, "Current SD card status:\r\n" );
+
+ for (i = 0; i < 2; i++) {
+ int drv_idx = drive_get_index( IF_IDE, 0, i);
+
+ control_write( client,
+ " Slot %d, image %s, inserted %d\r\n", i,
+ (drv_idx >=0 ? drives_table[drv_idx].bdrv->filename : "none"),
+ goldfish_mmc_is_media_inserted(i));
+ }
+ return 0;
+}
+
+static int
+do_sdcard_fail( ControlClient client, char* args )
+{
+ return -ENOSYS;
+}
+
+static const CommandDefRec sdcard_commands[] =
+{
+ { "insert", "hot-insert a virtual sdcard",
+ "'sdcard insert <slot #> [imagefile]'\r\n",
+ NULL, do_sdcard_insert, NULL },
+
+ { "remove", "hot-remove a virtual sdcard",
+ "'sdcard remove <slot #>'\r\n",
+ NULL, do_sdcard_remove, NULL },
+
+ { "status", "query virtual device status",
+ "'sdcard status'\r\n",
+ NULL, do_sdcard_status, NULL },
+
+ { "fail", "simulate an sdcard failure",
+ "'sdcard fail <read|write>'\r\n",
+ NULL, do_sdcard_fail, NULL },
+
+ { NULL, NULL, NULL, NULL, NULL, NULL }
+};
+
+
+/********************************************************************************************/
+/********************************************************************************************/
+/***** ******/
/***** M A I N C O M M A N D S ******/
/***** ******/
/********************************************************************************************/
@@ -2176,6 +2307,10 @@ static const CommandDefRec main_commands[] =
"allows you to modify the emulator window\r\n", NULL,
NULL, window_commands },
+ { "sdcard", "manage emulator sdcards",
+ "allows you to modify the emulator sdcard configuration\r\n", NULL,
+ NULL, sdcard_commands },
+
{ NULL, NULL, NULL, NULL, NULL, NULL }
};
diff --git a/android/help.c b/android/help.c
index a142f9d..cbca332 100644
--- a/android/help.c
+++ b/android/help.c
@@ -120,8 +120,8 @@ help_build_images( stralloc_t* out )
" You can use the -sysdir, -system, -kernel, -ramdisk, -datadir, -data options\n"
" to specify different search directories or specific image files. You can\n"
- " also use the -cache and -sdcard options to indicate specific cache partition\n"
- " and SD Card image files.\n\n"
+ " also use the -cache, -sdcard, and -sdcard2 options to indicate specific \n"
+ " cache partition and SD Card image files.\n\n"
" For more details, see the corresponding -help-<option> section.\n\n"
@@ -166,6 +166,7 @@ help_disk_images( stralloc_t* out )
" system-qemu.img an *optional* persistent system image\n"
" cache.img an *optional* cache partition image\n"
" sdcard.img an *optional* SD Card partition image\n\n"
+ " sdcard2.img an *optional* second SD Card partition image\n\n"
" If you use a virtual device, its content directory should store\n"
" all writable images, and read-only ones will be found from the\n"
@@ -181,7 +182,7 @@ help_disk_images( stralloc_t* out )
" can still run the emulator by explicitely providing the paths to\n"
" *all* required disk images through a combination of the following\n"
" options: -sysdir, -datadir, -kernel, -ramdisk, -system, -data, -cache\n"
- " and -sdcard\n\n"
+ " -sdcard, and -sdcard2\n\n"
" The actual logic being that the emulator should be able to find all\n"
" images from the options you give it.\n\n"
@@ -621,6 +622,21 @@ help_sdcard(stralloc_t* out)
}
static void
+help_sdcard2(stralloc_t* out)
+{
+ PRINTF(
+ " use '-sdcard2 <file>' to specify a second SD Card image file that will be attached\n"
+ " to the emulator. By default, the 'sdcard.img' file is searched in the data\n"
+ " directory.\n\n"
+
+ " if the file does not exist, the emulator will still start, but without a\n"
+ " second SD Card attached.\n\n"
+
+ " see '-help-disk-images' for more information about disk image files\n\n"
+ );
+}
+
+static void
help_skindir(stralloc_t* out)
{
PRINTF(
diff --git a/android/main.c b/android/main.c
index e791efe..de048b9 100644
--- a/android/main.c
+++ b/android/main.c
@@ -1795,6 +1795,7 @@ int main(int argc, char **argv)
int n;
char* opt;
int use_sdcard_img = 0;
+ int use_sdcard2_img = 0;
int serial = 0;
int gps_serial = 0;
int radio_serial = 0;
@@ -2059,6 +2060,14 @@ int main(int argc, char **argv)
D("autoconfig: -sdcard %s", opts->sdcard);
}
}
+
+ if (!opts->sdcard2 && opts->datadir) {
+ bufprint(tmp, tmpend, "%s/sdcard2.img", opts->datadir);
+ if (path_exists(tmp)) {
+ opts->sdcard2 = qemu_strdup(tmp);
+ D("autoconfig: -sdcard2 %s", opts->sdcard2);
+ }
+ }
}
/* setup the virtual device parameters from our options
@@ -2079,6 +2088,7 @@ int main(int argc, char **argv)
_forceAvdImagePath(AVD_IMAGE_USERDATA, opts->data, "user data", 0);
_forceAvdImagePath(AVD_IMAGE_CACHE, opts->cache, "cache", 0);
_forceAvdImagePath(AVD_IMAGE_SDCARD, opts->sdcard, "SD Card", 0);
+ _forceAvdImagePath(AVD_IMAGE_SDCARD2, opts->sdcard2, "SD Card 2", 0);
/* we don't accept -skindir without -skin now
* to simplify the autoconfig stuff with virtual devices
@@ -2471,11 +2481,14 @@ int main(int argc, char **argv)
args[n++] = strdup(tmp);
}
- if (hw->hw_sdCard != 0)
+ if (hw->hw_sdCard != 0) {
opts->sdcard = (char*) avdInfo_getImageFile(avd, AVD_IMAGE_SDCARD);
- else if (opts->sdcard) {
+ opts->sdcard2 = (char*) avdInfo_getImageFile(avd, AVD_IMAGE_SDCARD2);
+
+ } else if (opts->sdcard || opts->sdcard2) {
dwarning( "Emulated hardware doesn't support SD Cards" );
opts->sdcard = NULL;
+ opts->sdcard2 = NULL;
}
if(opts->sdcard) {
@@ -2497,6 +2510,25 @@ int main(int argc, char **argv)
}
}
+ if(opts->sdcard2) {
+ uint64_t size;
+ if (path_get_size(opts->sdcard2, &size) == 0) {
+ /* see if we have an sdcard image. get its size if it exists */
+ /* due to what looks like limitations of the MMC protocol, one has
+ * to use an SD Card image that is equal or larger than 9 MB
+ */
+ if (size < 9*1024*1024ULL) {
+ fprintf(stderr, "### WARNING: SD Card files must be at least 9MB, ignoring '%s'\n", opts->sdcard2);
+ } else {
+ args[n++] = "-hdb";
+ args[n++] = opts->sdcard2;
+ use_sdcard2_img = 1;
+ }
+ } else {
+ D("no SD Card image at '%s'", opts->sdcard2);
+ }
+ }
+
if (!opts->logcat || opts->logcat[0] == 0) {
opts->logcat = getenv("ANDROID_LOG_TAGS");
if (opts->logcat && opts->logcat[0] == 0)
diff --git a/hw/android_arm.c b/hw/android_arm.c
index 32f6925..4ef4a10 100644
--- a/hw/android_arm.c
+++ b/hw/android_arm.c
@@ -42,7 +42,18 @@ static struct goldfish_device nand_device = {
/* Board init. */
-#define TEST_SWITCH 1
+static void goldfish_sdcard_init(int n, unsigned base)
+{
+ int idx = drive_get_index( IF_IDE, 0, n );
+
+ goldfish_mmc_init(base, n);
+
+ if (idx >= 0) {
+ goldfish_mmc_insert(n, drives_table[idx].bdrv);
+ }
+}
+
+// #define TEST_SWITCH 1
#if TEST_SWITCH
uint32_t switch_test_write(void *opaque, uint32_t state)
{
@@ -113,11 +124,9 @@ static void android_arm_init_(ram_addr_t ram_size,
#ifdef HAS_AUDIO
goldfish_audio_init(0xff004000, 0, audio_input_source);
#endif
- {
- int idx = drive_get_index( IF_IDE, 0, 0 );
- if (idx >= 0)
- goldfish_mmc_init(0xff005000, 0, drives_table[idx].bdrv);
- }
+
+ goldfish_sdcard_init(0, 0xff005000);
+ goldfish_sdcard_init(1, 0xff007000);
goldfish_memlog_init(0xff006000);
diff --git a/hw/goldfish_device.h b/hw/goldfish_device.h
index d04a166..d0739b7 100644
--- a/hw/goldfish_device.h
+++ b/hw/goldfish_device.h
@@ -46,7 +46,12 @@ void goldfish_audio_init(uint32_t base, int id, const char* input_source);
void goldfish_battery_init();
void goldfish_battery_set_prop(int ac, int property, int value);
void goldfish_battery_display(void (* callback)(void *data, const char* string), void *data);
-void goldfish_mmc_init(uint32_t base, int id, BlockDriverState* bs);
+
+void goldfish_mmc_init(uint32_t base, int id);
+void goldfish_mmc_insert(int id, BlockDriverState* bs);
+void goldfish_mmc_remove(int id);
+int goldfish_mmc_is_media_inserted(int id);
+
void *goldfish_switch_add(char *name, uint32_t (*writefn)(void *opaque, uint32_t state), void *writeopaque, int id);
void goldfish_switch_set_state(void *opaque, uint32_t state);
diff --git a/hw/goldfish_mmc.c b/hw/goldfish_mmc.c
index 3824db9..8b5c137 100644
--- a/hw/goldfish_mmc.c
+++ b/hw/goldfish_mmc.c
@@ -52,6 +52,7 @@ enum {
MMC_STAT_END_OF_CMD = 1U << 0,
MMC_STAT_END_OF_DATA = 1U << 1,
MMC_STAT_STATE_CHANGE = 1U << 2,
+ MMC_STAT_CMD_TIMEOUT = 1U << 3,
/* MMC_STATE bits */
MMC_STATE_INSERTED = 1U << 0,
@@ -82,6 +83,9 @@ struct goldfish_mmc_state {
uint8_t* buf;
};
+#define GOLDFISH_MMC_MAX 2
+static struct goldfish_mmc_state *gDrvState[GOLDFISH_MMC_MAX];
+
#define GOLDFISH_MMC_SAVE_VERSION 2
#define QFIELD_STRUCT struct goldfish_mmc_state
QFIELD_BEGIN(goldfish_mmc_fields)
@@ -218,13 +222,24 @@ static void goldfish_mmc_do_command(struct goldfish_mmc_state *s, uint32_t cmd,
int new_status = MMC_STAT_END_OF_CMD;
int opcode = cmd & 63;
-// fprintf(stderr, "goldfish_mmc_do_command opcode: %s (0x%04X), arg: %d\n", get_command_name(opcode), cmd, arg);
-
+ //fprintf(stderr, "goldfish_mmc_do_command opcode: %s (0x%04X), arg: %d\n", get_command_name(opcode), cmd, arg);
s->resp[0] = 0;
s->resp[1] = 0;
s->resp[2] = 0;
s->resp[3] = 0;
+ if (!s->bs) {
+ /*
+ * No backing store available. Signal a command timeout
+ * to the host. If the command timeout irq enable is set
+ * then also set the status bit - otherwise we're assuming
+ * a legacy driver which doesnt support timeouts.
+ */
+ if (s->int_enable & MMC_STAT_CMD_TIMEOUT)
+ new_status |= MMC_STAT_CMD_TIMEOUT;
+ goto skip;
+ }
+
#define SET_R1_CURRENT_STATE(s) ((s << 9) & 0x00001E00) /* sx, b (4 bits) */
switch (opcode) {
@@ -405,6 +420,7 @@ static void goldfish_mmc_do_command(struct goldfish_mmc_state *s, uint32_t cmd,
break;
}
+ skip:
s->int_status |= new_status;
if ((s->int_status & s->int_enable)) {
@@ -414,7 +430,7 @@ static void goldfish_mmc_do_command(struct goldfish_mmc_state *s, uint32_t cmd,
static uint32_t goldfish_mmc_read(void *opaque, target_phys_addr_t offset)
{
- uint32_t ret;
+ uint32_t ret = 0;
struct goldfish_mmc_state *s = opaque;
switch(offset) {
@@ -430,9 +446,11 @@ static uint32_t goldfish_mmc_read(void *opaque, target_phys_addr_t offset)
case MMC_RESP_3:
return s->resp[3];
case MMC_STATE: {
- ret = MMC_STATE_INSERTED;
- if (bdrv_is_read_only(s->bs)) {
- ret |= MMC_STATE_READ_ONLY;
+ if (s->bs) {
+ ret = MMC_STATE_INSERTED;
+ if (bdrv_is_read_only(s->bs)) {
+ ret |= MMC_STATE_READ_ONLY;
+ }
}
return ret;
}
@@ -499,22 +517,71 @@ static CPUWriteMemoryFunc *goldfish_mmc_writefn[] = {
goldfish_mmc_write
};
-void goldfish_mmc_init(uint32_t base, int id, BlockDriverState* bs)
+void goldfish_mmc_init(uint32_t base, int id)
{
struct goldfish_mmc_state *s;
+ if (id >= GOLDFISH_MMC_MAX) {
+ fprintf(stderr, "mmc controller %d out of range\n", id);
+ return;
+ }
+
s = (struct goldfish_mmc_state *)qemu_mallocz(sizeof(*s));
s->dev.name = "goldfish_mmc";
s->dev.id = id;
s->dev.base = base;
s->dev.size = 0x1000;
s->dev.irq_count = 1;
- s->bs = bs;
+ s->bs = NULL;
s->buf = qemu_memalign(512,512);
+ gDrvState[id] = s;
+
goldfish_device_add(&s->dev, goldfish_mmc_readfn, goldfish_mmc_writefn, s);
- register_savevm( "goldfish_mmc", 0, GOLDFISH_MMC_SAVE_VERSION,
+ register_savevm( (!id ? "goldfish_mmc0" : "goldfish_mmc1"),
+ id, GOLDFISH_MMC_SAVE_VERSION,
goldfish_mmc_save, goldfish_mmc_load, s);
}
+static void goldfish_mmc_setbs(struct goldfish_mmc_state* s, BlockDriverState* bs)
+{
+ s->bs = bs;
+ s->int_status |= MMC_STAT_STATE_CHANGE;
+
+ /*
+ * Legacy - only send state change irq if
+ * the driver has the CMD_TIMEOUT irq enabled.
+ */
+ if (s->int_enable & MMC_STAT_CMD_TIMEOUT)
+ goldfish_device_set_irq(&s->dev, 0, (s->int_status & s->int_enable));
+}
+
+void goldfish_mmc_insert(int id, BlockDriverState* bs)
+{
+ if (id >= GOLDFISH_MMC_MAX) {
+ return -1;
+ }
+
+ goldfish_mmc_setbs(gDrvState[id], bs);
+}
+
+int goldfish_mmc_is_media_inserted(int id)
+{
+ if (id > GOLDFISH_MMC_MAX) {
+ return -1;
+ }
+
+ return (gDrvState[id]->bs != NULL);
+}
+
+void goldfish_mmc_remove(int id)
+{
+ if (id >= GOLDFISH_MMC_MAX) {
+ return -1;
+ }
+
+ goldfish_mmc_setbs(gDrvState[id], NULL);
+}
+
+
diff --git a/sysemu.h b/sysemu.h
index fe24415..7959197 100644
--- a/sysemu.h
+++ b/sysemu.h
@@ -173,6 +173,7 @@ extern int nb_drives;
extern DriveInfo drives_table[MAX_DRIVES+1];
extern int drive_get_index(BlockInterfaceType type, int bus, int unit);
+extern int drive_get_index_by_bdrv(BlockDriverState *bdrv);
extern int drive_get_max_bus(BlockInterfaceType type);
extern void drive_uninit(BlockDriverState *bdrv);
extern void drive_remove(int index);
@@ -192,6 +193,8 @@ extern int nb_drives_opt;
extern int drive_add(const char *file, const char *fmt, ...);
extern int drive_init(struct drive_opt *arg, int snapshot, void *machine);
+extern int drive_swap(struct BlockDriverState *bdrv, const char *file);
+extern int drive_hotadd(const char *file, const char *fmt, ...);
/* acpi */
void qemu_system_hot_add_init(void);
diff --git a/vl-android.c b/vl-android.c
index d6feced..5d234a2 100644
--- a/vl-android.c
+++ b/vl-android.c
@@ -2223,7 +2223,21 @@ static int drive_get_free_idx(void)
return -1;
}
-int drive_add(const char *file, const char *fmt, ...)
+int drive_swap(BlockDriverState *bdrv, const char *file)
+{
+ int index = drive_get_index_by_bdrv(bdrv);
+ int unit = drives_table[index].unit;
+ int opt_idx;
+
+ bdrv_close(bdrv);
+ drive_uninit(bdrv);
+ bdrv_delete(bdrv);
+
+ opt_idx = drive_add(file, HD_ALIAS, unit);
+ return drive_init(&drives_opt[opt_idx], 0, current_machine);
+}
+
+int drive_hotadd(const char *file, const char *fmt, ...)
{
va_list ap;
int index = drive_opt_get_free_idx();
@@ -2238,7 +2252,27 @@ int drive_add(const char *file, const char *fmt, ...)
vsnprintf(drives_opt[index].opt,
sizeof(drives_opt[0].opt), fmt, ap);
va_end(ap);
+ nb_drives_opt++;
+ if (drive_init(&drives_opt[index], 0, current_machine) < 0)
+ return -1;
+ return index;
+}
+
+int drive_add(const char *file, const char *fmt, ...)
+{
+ va_list ap;
+ int index = drive_opt_get_free_idx();
+ if (nb_drives_opt >= MAX_DRIVES || index == -1) {
+ fprintf(stderr, "qemu: too many drives\n");
+ return -1;
+ }
+
+ drives_opt[index].file = file;
+ va_start(ap, fmt);
+ vsnprintf(drives_opt[index].opt,
+ sizeof(drives_opt[0].opt), fmt, ap);
+ va_end(ap);
nb_drives_opt++;
return index;
}
@@ -2249,6 +2283,15 @@ void drive_remove(int index)
nb_drives_opt--;
}
+int drive_get_index_by_bdrv(BlockDriverState *bdrv)
+{
+ int index;
+
+ for (index = 0; index < MAX_DRIVES; index++)
+ if (drives_table[index].bdrv == bdrv)
+ return index;
+ return -1;
+}
int drive_get_index(BlockInterfaceType type, int bus, int unit)
{
int index;