path: root/hw/goldfish_audio.c

/* Copyright (C) 2007-2008 The Android Open Source Project
**
** This software is licensed under the terms of the GNU General Public
** License version 2, as published by the Free Software Foundation, and
** may be copied, distributed, and modified under those terms.
**
** This program is distributed in the hope that it will be useful,
** but WITHOUT ANY WARRANTY; without even the implied warranty of
** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
** GNU General Public License for more details.
*/
#include "qemu_file.h"
#include "goldfish_device.h"
#include "audio/audio.h"
#include "qemu_debug.h"
#include "android/globals.h"

#define  DEBUG  1

#if DEBUG
#  define  D(...)  VERBOSE_PRINT(audio,__VA_ARGS__)
#else
#  define  D(...)  ((void)0)
#endif

extern void  dprint(const char*  fmt, ...);

/* define USE_QEMU_AUDIO_IN to 1 to use QEMU's audio subsystem to
 * implement the audio input. if 0, this will try to read a .wav file
 * directly...
 */
#define  USE_QEMU_AUDIO_IN  1

enum {
	/* audio status register */
	AUDIO_INT_STATUS	= 0x00,
	/* set this to enable IRQ */
	AUDIO_INT_ENABLE	= 0x04,
	/* set these to specify buffer addresses */
	AUDIO_SET_WRITE_BUFFER_1 = 0x08,
	AUDIO_SET_WRITE_BUFFER_2 = 0x0C,
	/* set number of bytes in buffer to write */
	AUDIO_WRITE_BUFFER_1  = 0x10,
	AUDIO_WRITE_BUFFER_2  = 0x14,

	/* true if audio input is supported */
	AUDIO_READ_SUPPORTED = 0x18,
	/* buffer to use for audio input */
	AUDIO_SET_READ_BUFFER = 0x1C,

	/* driver writes number of bytes to read */
	AUDIO_START_READ  = 0x20,

	/* number of bytes available in read buffer */
	AUDIO_READ_BUFFER_AVAILABLE  = 0x24,

	/* AUDIO_INT_STATUS bits */

	/* this bit set when it is safe to write more bytes to the buffer */
	AUDIO_INT_WRITE_BUFFER_1_EMPTY	= 1U << 0,
	AUDIO_INT_WRITE_BUFFER_2_EMPTY	= 1U << 1,
	AUDIO_INT_READ_BUFFER_FULL      = 1U << 2,
};

struct goldfish_audio_buff {
    uint32_t  address;
    uint32_t  length;
    uint8*    data;
    uint32_t  capacity;
    uint32_t  offset;
};


struct goldfish_audio_state {
    struct goldfish_device dev;
    // buffer flags
    uint32_t int_status;
    // irq enable mask for int_status
    uint32_t int_enable;

#ifndef USE_QEMU_AUDIO_IN
    // address of the read buffer
    uint32_t read_buffer;
    // path to file or device to use for input
    const char* input_source;
    // true if input is a wav file
    int input_is_wav;
    // true if we need to convert stereo -> mono
    int input_is_stereo;
    // file descriptor to use for input
    int input_fd;
#endif

    // number of bytes available in the read buffer
    int read_buffer_available;

    // set to 1 or 2 to indicate which buffer we are writing from, or zero if both buffers are empty
    int current_buffer;

    // current data to write
    struct goldfish_audio_buff  out_buff1[1];
    struct goldfish_audio_buff  out_buff2[1];
    struct goldfish_audio_buff  in_buff[1];

    // for QEMU sound output
    QEMUSoundCard card;
    SWVoiceOut *voice;
#if USE_QEMU_AUDIO_IN
    SWVoiceIn*  voicein;
#endif
};

static void
goldfish_audio_buff_init( struct goldfish_audio_buff*  b )
{
    b->address  = 0;
    b->length   = 0;
    b->data     = NULL;
    b->capacity = 0;
    b->offset   = 0;
}

static void
goldfish_audio_buff_reset( struct goldfish_audio_buff*  b )
{
    b->offset = 0;
    b->length = 0;
}

static uint32_t
goldfish_audio_buff_length( struct goldfish_audio_buff*  b )
{
    return b->length;
}

static void
goldfish_audio_buff_ensure( struct goldfish_audio_buff*  b, uint32_t  size )
{
    if (b->capacity < size) {
        b->data     = qemu_realloc(b->data, size);
        b->capacity = size;
    }
}

static void
goldfish_audio_buff_set_address( struct goldfish_audio_buff*  b, uint32_t  addr )
{
    b->address = addr;
}

static void
goldfish_audio_buff_set_length( struct goldfish_audio_buff*  b, uint32_t  len )
{
    b->length = len;
    b->offset = 0;
    goldfish_audio_buff_ensure(b, len);
}

static void
goldfish_audio_buff_read( struct goldfish_audio_buff*  b )
{
    cpu_physical_memory_read(b->address, b->data, b->length);
}

static void
goldfish_audio_buff_write( struct goldfish_audio_buff*  b )
{
    cpu_physical_memory_write(b->address, b->data, b->length);
}

static int
goldfish_audio_buff_send( struct goldfish_audio_buff*  b, int  free, struct goldfish_audio_state*  s )
{
    int  ret, write = b->length;

    if (write > free)
        write = free;

    ret = AUD_write(s->voice, b->data + b->offset, write);
    b->offset += ret;
    b->length -= ret;
    return ret;
}

static int
goldfish_audio_buff_available( struct goldfish_audio_buff*  b )
{
    return b->length - b->offset;
}

static int
goldfish_audio_buff_recv( struct goldfish_audio_buff*  b, int  avail, struct goldfish_audio_state*  s )
{
    int     missing = b->length - b->offset;
    int     avail2 = (avail > missing) ? missing : avail;
    int     read;

    read = AUD_read(s->voicein, b->data + b->offset, avail2 );
    if (read == 0)
        return 0;

    if (avail2 > 0)
        D("%s: AUD_read(%d) returned %d", __FUNCTION__, avail2, read);

    cpu_physical_memory_write( b->address + b->offset, b->data, read );
    b->offset += read;

    return read;
}

static void
goldfish_audio_buff_put( struct goldfish_audio_buff*  b, QEMUFile*  f )
{
    qemu_put_be32(f, b->address );
    qemu_put_be32(f, b->length );
    qemu_put_be32(f, b->offset );
    qemu_put_buffer(f, b->data, b->length );
}

static void
goldfish_audio_buff_get( struct goldfish_audio_buff*  b, QEMUFile*  f )
{
    b->address = qemu_get_be32(f);
    b->length  = qemu_get_be32(f);
    b->offset  = qemu_get_be32(f);
    goldfish_audio_buff_ensure(b, b->length);
    qemu_get_buffer(f, b->data, b->length);
}

/* update this whenever you change the goldfish_audio_state structure */
#define  AUDIO_STATE_SAVE_VERSION  2

#define  QFIELD_STRUCT   struct goldfish_audio_state
QFIELD_BEGIN(audio_state_fields)
    QFIELD_INT32(int_status),
    QFIELD_INT32(int_enable),
    QFIELD_INT32(read_buffer_available),
    QFIELD_INT32(current_buffer),
QFIELD_END

static void  audio_state_save( QEMUFile*  f, void* opaque )
{
    struct goldfish_audio_state*  s = opaque;

    qemu_put_struct(f, audio_state_fields, s);

    goldfish_audio_buff_put (s->out_buff1, f);
    goldfish_audio_buff_put (s->out_buff2, f);
    goldfish_audio_buff_put (s->in_buff, f);
}

static int   audio_state_load( QEMUFile*  f, void*  opaque, int  version_id )
{
    struct goldfish_audio_state*  s = opaque;
    int                           ret;

    if (version_id != AUDIO_STATE_SAVE_VERSION)
        return -1;

    ret = qemu_get_struct(f, audio_state_fields, s);
    if (!ret) {
        goldfish_audio_buff_get( s->out_buff1, f );
        goldfish_audio_buff_get( s->out_buff2, f );
        goldfish_audio_buff_get (s->in_buff, f);
    }
    return ret;
}

static void enable_audio(struct goldfish_audio_state *s, int enable)
{
    // enable or disable the output voice
    if (s->voice != NULL) {
        AUD_set_active_out(s->voice,   (enable & (AUDIO_INT_WRITE_BUFFER_1_EMPTY | AUDIO_INT_WRITE_BUFFER_2_EMPTY)) != 0);
        goldfish_audio_buff_reset( s->out_buff1 );
        goldfish_audio_buff_reset( s->out_buff2 );
    }

    if (s->voicein) {
        AUD_set_active_in (s->voicein, (enable & AUDIO_INT_READ_BUFFER_FULL) != 0);
        goldfish_audio_buff_reset( s->in_buff );
    }
    s->current_buffer = 0;
}

#if USE_QEMU_AUDIO_IN
static void start_read(struct goldfish_audio_state *s, uint32_t count)
{
    //printf( "... goldfish audio start_read, count=%d\n", count );
    goldfish_audio_buff_set_length( s->in_buff, count );
    s->read_buffer_available = count;
}
#else
static void start_read(struct goldfish_audio_state *s, uint32_t count)
{
    uint8   wav_header[44];
    int result;

    if (!s->input_source) return;

    if (s->input_fd < 0) {
        s->input_fd = open(s->input_source, O_BINARY | O_RDONLY);

        if (s->input_fd < 0) {
            fprintf(stderr, "goldfish_audio could not open %s for audio input\n", s->input_source);
            s->input_source = NULL; // set to to avoid endless retries
            return;
        }

        // skip WAV header if we have a WAV file
        if (s->input_is_wav) {
            if (read(s->input_fd, wav_header, sizeof(wav_header)) != sizeof(wav_header)) {
                fprintf(stderr, "goldfish_audio could not read WAV file header %s\n", s->input_source);
                s->input_fd = -1;
                s->input_source = NULL; // set to to avoid endless retries
                return;
            }

            // is the WAV file stereo?
            s->input_is_stereo = (wav_header[22] == 2);
        } else {
            // assume input from an audio device is stereo
            s->input_is_stereo = 1;
        }
    }

    uint8* buffer = (uint8*)phys_ram_base + s->read_buffer;
    if (s->input_is_stereo) {
        // need to read twice as much data
        count *= 2;
    }

try_again:
    result = read(s->input_fd, buffer, count);
    if (result == 0 && s->input_is_wav) {
        // end of file, so seek back to the beginning
       lseek(s->input_fd, sizeof(wav_header), SEEK_SET);
       goto try_again;
    }

    if (result > 0 && s->input_is_stereo) {
        // we need to convert stereo to mono
        uint8* src  = (uint8*)buffer;
        uint8* dest = src;
        int count = result/2;
        while (count-- > 0) {
            int  sample1 = src[0] | (src[1] << 8);
            int  sample2 = src[2] | (src[3] << 8);
            int  sample  = (sample1 + sample2) >> 1;
            dst[0] = (uint8_t) sample;
            dst[1] = (uint8_t)(sample >> 8);
            src   += 4;
            dst   += 2;
        }

        // we reduced the number of bytes by 2
        result /= 2;
    }

    s->read_buffer_available = (result > 0 ? result : 0);
    s->int_status |= AUDIO_INT_READ_BUFFER_FULL;
    goldfish_device_set_irq(&s->dev, 0, (s->int_status & s->int_enable));
}
#endif

static uint32_t goldfish_audio_read(void *opaque, target_phys_addr_t offset)
{
    uint32_t ret;
    struct goldfish_audio_state *s = opaque;
    switch(offset) {
        case AUDIO_INT_STATUS:
            // return current buffer status flags
            ret = s->int_status & s->int_enable;
            if(ret) {
                goldfish_device_set_irq(&s->dev, 0, 0);
            }
            return ret;

	case AUDIO_READ_SUPPORTED:
#if USE_QEMU_AUDIO_IN
            D("%s: AUDIO_READ_SUPPORTED returns %d", __FUNCTION__,
              (s->voicein != NULL));
            return (s->voicein != NULL);
#else
            return (s->input_source ? 1 : 0);
#endif

	case AUDIO_READ_BUFFER_AVAILABLE:
            D("%s: AUDIO_READ_BUFFER_AVAILABLE returns %d", __FUNCTION__,
               s->read_buffer_available);
            goldfish_audio_buff_write( s->in_buff );
	    return s->read_buffer_available;

        default:
            cpu_abort (cpu_single_env, "goldfish_audio_read: Bad offset %x\n", offset);
            return 0;
    }
}

static void goldfish_audio_write(void *opaque, target_phys_addr_t offset, uint32_t val)
{
    struct goldfish_audio_state *s = opaque;

    switch(offset) {
        case AUDIO_INT_ENABLE:
            /* enable buffer empty interrupts */
            D("%s: AUDIO_INT_ENABLE %d", __FUNCTION__, val );
            enable_audio(s, val);
            s->int_enable = val;
            s->int_status = (AUDIO_INT_WRITE_BUFFER_1_EMPTY | AUDIO_INT_WRITE_BUFFER_2_EMPTY);
            goldfish_device_set_irq(&s->dev, 0, (s->int_status & s->int_enable));
            break;
        case AUDIO_SET_WRITE_BUFFER_1:
            /* save pointer to buffer 1 */
            D( "%s: AUDIO_SET_WRITE_BUFFER_1 %08x", __FUNCTION__, val);
            goldfish_audio_buff_set_address( s->out_buff1, val );
            break;
        case AUDIO_SET_WRITE_BUFFER_2:
            /* save pointer to buffer 2 */
            D( "%s: AUDIO_SET_WRITE_BUFFER_2 %08x", __FUNCTION__, val);
            goldfish_audio_buff_set_address( s->out_buff2, val );
            break;
        case AUDIO_WRITE_BUFFER_1:
            /* record that data in buffer 1 is ready to write */
            //D( "%s: AUDIO_WRITE_BUFFER_1 %08x", __FUNCTION__, val);
            if (s->current_buffer == 0) s->current_buffer = 1;
            goldfish_audio_buff_set_length( s->out_buff1, val );
            goldfish_audio_buff_read( s->out_buff1 );
            s->int_status &= ~AUDIO_INT_WRITE_BUFFER_1_EMPTY;
            break;
        case AUDIO_WRITE_BUFFER_2:
            /* record that data in buffer 2 is ready to write */
            //D( "%s: AUDIO_WRITE_BUFFER_2 %08x", __FUNCTION__, val);
            if (s->current_buffer == 0) s->current_buffer = 2;
            goldfish_audio_buff_set_length( s->out_buff2, val );
            goldfish_audio_buff_read( s->out_buff2 );
            s->int_status &= ~AUDIO_INT_WRITE_BUFFER_2_EMPTY;
            break;

        case AUDIO_SET_READ_BUFFER:
            /* save pointer to the read buffer */
            goldfish_audio_buff_set_address( s->in_buff, val );
            D( "%s: AUDIO_SET_READ_BUFFER %08x", __FUNCTION__, val );
            break;

        case AUDIO_START_READ:
            D( "%s: AUDIO_START_READ %d", __FUNCTION__, val );
            start_read(s, val);
            s->int_status &= ~AUDIO_INT_READ_BUFFER_FULL;
            goldfish_device_set_irq(&s->dev, 0, (s->int_status & s->int_enable));
            break;

        default:
            cpu_abort (cpu_single_env, "goldfish_audio_write: Bad offset %x\n", offset);
    }
}

static void goldfish_audio_callback(void *opaque, int free)
{
    struct goldfish_audio_state *s = opaque;
    int new_status = 0;

    /* loop until free is zero or both buffers are empty */
    while (free && s->current_buffer) {

        /* write data in buffer 1 */
        while (free && s->current_buffer == 1) {
            int  written = goldfish_audio_buff_send( s->out_buff1, free, s );
            if (written) {
                D("%s: sent %5d bytes to audio output (buffer 1)", __FUNCTION__, written);
                free -= written;

                if (goldfish_audio_buff_length( s->out_buff1 ) == 0) {
                    new_status |= AUDIO_INT_WRITE_BUFFER_1_EMPTY;
                    s->current_buffer = (goldfish_audio_buff_length( s->out_buff2 ) ? 2 : 0);
                }
            } else {
                break;
            }
        }

        /* write data in buffer 2 */
        while (free && s->current_buffer == 2) {
            int  written = goldfish_audio_buff_send( s->out_buff2, free, s );
            if (written) {
                D("%s: sent %5d bytes to audio output (buffer 2)", __FUNCTION__, written);
                free -= written;

                if (goldfish_audio_buff_length( s->out_buff2 ) == 0) {
                    new_status |= AUDIO_INT_WRITE_BUFFER_2_EMPTY;
                    s->current_buffer = (goldfish_audio_buff_length( s->out_buff1 ) ? 1 : 0);
                }
            } else {
                break;
            }
        }
    }

    if (new_status && new_status != s->int_status) {
        s->int_status |= new_status;
        goldfish_device_set_irq(&s->dev, 0, (s->int_status & s->int_enable));
    }
}

#if USE_QEMU_AUDIO_IN
static void
goldfish_audio_in_callback(void *opaque, int avail)
{
    struct goldfish_audio_state *s = opaque;
    int new_status = 0;

    if (goldfish_audio_buff_available( s->in_buff ) == 0 )
        return;

    while (avail > 0) {
        int  read = goldfish_audio_buff_recv( s->in_buff, avail, s );
        if (read == 0)
            break;

        avail -= read;

        if (goldfish_audio_buff_available( s->in_buff) == 0) {
            new_status |= AUDIO_INT_READ_BUFFER_FULL;
            D("%s: AUDIO_INT_READ_BUFFER_FULL available=%d",
              __FUNCTION__, goldfish_audio_buff_length( s->in_buff ));
            break;
        }
    }

    if (new_status && new_status != s->int_status) {
        s->int_status |= new_status;
        goldfish_device_set_irq(&s->dev, 0, (s->int_status & s->int_enable));
    }
}
#endif /* USE_QEMU_AUDIO_IN */

static CPUReadMemoryFunc *goldfish_audio_readfn[] = {
   goldfish_audio_read,
   goldfish_audio_read,
   goldfish_audio_read
};

static CPUWriteMemoryFunc *goldfish_audio_writefn[] = {
   goldfish_audio_write,
   goldfish_audio_write,
   goldfish_audio_write
};

void goldfish_audio_init(uint32_t base, int id, const char* input_source)
{
    struct goldfish_audio_state *s;
    struct audsettings as;

    /* nothing to do if no audio input and output */
    if (!android_hw->hw_audioOutput && !android_hw->hw_audioInput)
        return;

    s = (struct goldfish_audio_state *)qemu_mallocz(sizeof(*s));
    s->dev.name = "goldfish_audio";
    s->dev.id = id;
    s->dev.base = base;
    s->dev.size = 0x1000;
    s->dev.irq_count = 1;

#ifndef USE_QEMU_AUDIO_IN
    s->input_fd = -1;
    if (input_source) {
        s->input_source = input_source;
        char* extension = strrchr(input_source, '.');
        if (extension && strcasecmp(extension, ".wav") == 0) {
            s->input_is_wav = 1;
        }
     }
#endif

    AUD_register_card( "goldfish_audio", &s->card);

    as.freq = 44100;
    as.nchannels = 2;
    as.fmt = AUD_FMT_S16;
    as.endianness = AUDIO_HOST_ENDIANNESS;

    if (android_hw->hw_audioOutput) {
        s->voice = AUD_open_out (
            &s->card,
            NULL,
            "goldfish_audio",
            s,
            goldfish_audio_callback,
            &as
            );
        if (!s->voice) {
            dprint("warning: opening audio output failed\n");
            return;
        }
    }

#if USE_QEMU_AUDIO_IN
    as.freq       = 8000;
    as.nchannels  = 1;
    as.fmt        = AUD_FMT_S16;
    as.endianness = AUDIO_HOST_ENDIANNESS;

    if (android_hw->hw_audioInput) {
        s->voicein = AUD_open_in (
            &s->card,
            NULL,
            "goldfish_audio_in",
            s,
            goldfish_audio_in_callback,
            &as
            );
        if (!s->voicein) {
            dprint("warning: opening audio input failed\n");
        }
    }
#endif

    goldfish_audio_buff_init( s->out_buff1 );
    goldfish_audio_buff_init( s->out_buff2 );
    goldfish_audio_buff_init( s->in_buff );

    goldfish_device_add(&s->dev, goldfish_audio_readfn, goldfish_audio_writefn, s);

    register_savevm( "audio_state", 0, AUDIO_STATE_SAVE_VERSION,
                     audio_state_save, audio_state_load, s );
}