diff options
79 files changed, 1630 insertions, 589 deletions
diff --git a/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt b/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt index e137874..9b3f1d4 100644 --- a/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt +++ b/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt @@ -1,7 +1,10 @@ * Marvell PXA GPIO controller Required properties: -- compatible : Should be "mrvl,pxa-gpio" or "mrvl,mmp-gpio" +- compatible : Should be "intel,pxa25x-gpio", "intel,pxa26x-gpio", + "intel,pxa27x-gpio", "intel,pxa3xx-gpio", + "marvell,pxa93x-gpio", "marvell,mmp-gpio" or + "marvell,mmp2-gpio". - reg : Address and length of the register set for the device - interrupts : Should be the port interrupt shared by all gpio pins. There're three gpio interrupts in arch-pxa, and they're gpio0, @@ -18,7 +21,7 @@ Required properties: Example: gpio: gpio@d4019000 { - compatible = "mrvl,mmp-gpio"; + compatible = "marvell,mmp-gpio"; reg = <0xd4019000 0x1000>; interrupts = <49>; interrupt-name = "gpio_mux"; diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 5c8e59f..f57a6ba 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -330,6 +330,13 @@ choice Say Y here if you want kernel low-level debugging support on PicoXcell based platforms. + config DEBUG_PXA_UART1 + depends on ARCH_PXA + bool "Use PXA UART1 for low-level debug" + help + Say Y here if you want kernel low-level debugging support + on PXA UART1. + config DEBUG_REALVIEW_STD_PORT bool "RealView Default UART" depends on ARCH_REALVIEW @@ -615,6 +622,7 @@ config DEBUG_LL_INCLUDE default "debug/bcm2835.S" if DEBUG_BCM2835 default "debug/cns3xxx.S" if DEBUG_CNS3XXX default "debug/exynos.S" if DEBUG_EXYNOS_UART + default "debug/highbank.S" if DEBUG_HIGHBANK_UART default "debug/icedcc.S" if DEBUG_ICEDCC default "debug/imx.S" if DEBUG_IMX1_UART || \ DEBUG_IMX25_UART || \ @@ -624,20 +632,21 @@ config DEBUG_LL_INCLUDE DEBUG_IMX51_UART || \ DEBUG_IMX53_UART ||\ DEBUG_IMX6Q_UART - default "debug/highbank.S" if DEBUG_HIGHBANK_UART default "debug/mvebu.S" if DEBUG_MVEBU_UART default "debug/mxs.S" if DEBUG_IMX23_UART || DEBUG_IMX28_UART default "debug/nomadik.S" if DEBUG_NOMADIK_UART default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART default "debug/picoxcell.S" if DEBUG_PICOXCELL_UART + default "debug/pxa.S" if DEBUG_PXA_UART1 || DEBUG_MMP_UART2 || \ + DEBUG_MMP_UART3 default "debug/sirf.S" if DEBUG_SIRFPRIMA2_UART1 || DEBUG_SIRFMARCO_UART1 default "debug/socfpga.S" if DEBUG_SOCFPGA_UART default "debug/sunxi.S" if DEBUG_SUNXI_UART0 || DEBUG_SUNXI_UART1 + default "debug/tegra.S" if DEBUG_TEGRA_UART + default "debug/ux500.S" if DEBUG_UX500_UART default "debug/vexpress.S" if DEBUG_VEXPRESS_UART0_DETECT || \ DEBUG_VEXPRESS_UART0_CA9 || DEBUG_VEXPRESS_UART0_RS1 default "debug/vt8500.S" if DEBUG_VT8500_UART0 - default "debug/tegra.S" if DEBUG_TEGRA_UART - default "debug/ux500.S" if DEBUG_UX500_UART default "debug/zynq.S" if DEBUG_ZYNQ_UART0 || DEBUG_ZYNQ_UART1 default "mach/debug-macro.S" diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 5519663..853e199 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -61,7 +61,8 @@ dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb \ dtb-$(CONFIG_ARCH_INTEGRATOR) += integratorap.dtb \ integratorcp.dtb dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb -dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-dns320.dtb \ +dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \ + kirkwood-dns320.dtb \ kirkwood-dns325.dtb \ kirkwood-dockstar.dtb \ kirkwood-dreamplug.dtb \ @@ -75,6 +76,7 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-dns320.dtb \ kirkwood-lschlv2.dtb \ kirkwood-lsxhl.dtb \ kirkwood-mplcec4.dtb \ + kirkwood-netgear_readynas_duo_v2.dtb \ kirkwood-ns2.dtb \ kirkwood-ns2lite.dtb \ kirkwood-ns2max.dtb \ @@ -153,7 +155,9 @@ dtb-$(CONFIG_ARCH_U8500) += snowball.dtb \ ccu9540.dtb dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm9d.dtb \ r8a7740-armadillo800eva.dtb \ + r8a7779-marzen-reference.dtb \ sh73a0-kzm9g.dtb \ + sh73a0-kzm9g-reference.dtb \ sh7372-mackerel.dtb dtb-$(CONFIG_ARCH_SOCFPGA) += socfpga_cyclone5.dtb \ socfpga_vt.dtb diff --git a/arch/arm/boot/dts/kirkwood-cloudbox.dts b/arch/arm/boot/dts/kirkwood-cloudbox.dts new file mode 100644 index 0000000..5f21d4e --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-cloudbox.dts @@ -0,0 +1,89 @@ +/dts-v1/; + +/include/ "kirkwood.dtsi" +/include/ "kirkwood-6281.dtsi" + +/ { + model = "LaCie CloudBox"; + compatible = "lacie,cloudbox", "marvell,kirkwood-88f6702", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8"; + }; + + ocp@f1000000 { + pinctrl: pinctrl@10000 { + pinctrl-0 = < &pmx_spi &pmx_uart0 + &pmx_cloudbox_sata0 >; + pinctrl-names = "default"; + + pmx_cloudbox_sata0: pmx-cloudbox-sata0 { + marvell,pins = "mpp15"; + marvell,function = "sata0"; + }; + }; + + serial@12000 { + clock-frequency = <166666667>; + status = "okay"; + }; + + sata@80000 { + status = "okay"; + nr-ports = <1>; + }; + + spi@10600 { + status = "okay"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mx25l4005a"; + reg = <0>; + spi-max-frequency = <20000000>; + mode = <0>; + + partition@0 { + reg = <0x0 0x80000>; + label = "u-boot"; + }; + }; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + button@1 { + label = "Power push button"; + linux,code = <116>; + gpios = <&gpio0 16 1>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + red-fail { + label = "cloudbox:red:fail"; + gpios = <&gpio0 14 0>; + }; + blue-sata { + label = "cloudbox:blue:sata"; + gpios = <&gpio0 15 0>; + }; + }; + + gpio_poweroff { + compatible = "gpio-poweroff"; + gpios = <&gpio0 17 0>; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts new file mode 100644 index 0000000..1ca66ab --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts @@ -0,0 +1,180 @@ +/dts-v1/; + +/include/ "kirkwood.dtsi" +/include/ "kirkwood-6282.dtsi" + +/ { + model = "NETGEAR ReadyNAS Duo v2"; + compatible = "netgear,readynas-duo-v2", "netgear,readynas", "marvell,kirkwood-88f6282", "marvell,kirkwood"; + + memory { /* 256 MB */ + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + }; + + ocp@f1000000 { + pinctrl: pinctrl@10000 { + + pinctrl-0 = < &pmx_uart0 + &pmx_button_power + &pmx_button_backup + &pmx_button_reset + &pmx_led_blue_power + &pmx_led_blue_activity + &pmx_led_blue_disk1 + &pmx_led_blue_disk2 + &pmx_led_blue_backup >; + pinctrl-names = "default"; + + pmx_button_power: pmx-button-power { + marvell,pins = "mpp47"; + marvell,function = "gpio"; + }; + pmx_button_backup: pmx-button-backup { + marvell,pins = "mpp45"; + marvell,function = "gpio"; + }; + pmx_button_reset: pmx-button-reset { + marvell,pins = "mpp13"; + marvell,function = "gpio"; + }; + pmx_led_blue_power: pmx-led-blue-power { + marvell,pins = "mpp31"; + marvell,function = "gpio"; + }; + pmx_led_blue_activity: pmx-led-blue-activity { + marvell,pins = "mpp38"; + marvell,function = "gpio"; + }; + pmx_led_blue_disk1: pmx-led-blue-disk1 { + marvell,pins = "mpp23"; + marvell,function = "gpio"; + }; + pmx_led_blue_disk2: pmx-led-blue-disk2 { + marvell,pins = "mpp22"; + marvell,function = "gpio"; + }; + pmx_led_blue_backup: pmx-led-blue-backup { + marvell,pins = "mpp29"; + marvell,function = "gpio"; + }; + }; + + i2c@11000 { + status = "okay"; + + rs5c372a: rs5c372a@32 { + compatible = "ricoh,rs5c372a"; + reg = <0x32>; + }; + }; + + serial@12000 { + status = "okay"; + }; + + nand@3000000 { + status = "okay"; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x180000>; + read-only; + }; + + partition@180000 { + label = "u-boot-env"; + reg = <0x180000 0x20000>; + }; + + partition@200000 { + label = "uImage"; + reg = <0x0200000 0x600000>; + }; + + partition@800000 { + label = "minirootfs"; + reg = <0x0800000 0x1000000>; + }; + + partition@1800000 { + label = "jffs2"; + reg = <0x1800000 0x6800000>; + }; + }; + + sata@80000 { + status = "okay"; + nr-ports = <2>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + power_led { + label = "status:blue:power_led"; + gpios = <&gpio0 31 1>; /* GPIO 31 Active Low */ + linux,default-trigger = "default-on"; + }; + activity_led { + label = "status:blue:activity_led"; + gpios = <&gpio1 6 1>; /* GPIO 38 Active Low */ + }; + disk1_led { + label = "status:blue:disk1_led"; + gpios = <&gpio0 23 1>; /* GPIO 23 Active Low */ + }; + disk2_led { + label = "status:blue:disk2_led"; + gpios = <&gpio0 22 1>; /* GPIO 22 Active Low */ + }; + backup_led { + label = "status:blue:backup_led"; + gpios = <&gpio0 29 1>; /* GPIO 29 Active Low*/ + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + button@1 { + label = "Power Button"; + linux,code = <116>; /* KEY_POWER */ + gpios = <&gpio1 15 1>; + }; + button@2 { + label = "Reset Button"; + linux,code = <0x198>; /* KEY_RESTART */ + gpios = <&gpio0 13 1>; + }; + button@3 { + label = "Backup Button"; + linux,code = <133>; /* KEY_COPY */ + gpios = <&gpio1 13 1>; + }; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + usb_power: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "USB 3.0 Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio1 14 0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-ns2mini.dts b/arch/arm/boot/dts/kirkwood-ns2mini.dts index b79f5eb..adab1ab 100644 --- a/arch/arm/boot/dts/kirkwood-ns2mini.dts +++ b/arch/arm/boot/dts/kirkwood-ns2mini.dts @@ -3,6 +3,7 @@ /include/ "kirkwood-ns2-common.dtsi" / { + /* This machine is embedded in the first LaCie CloudBox product. */ model = "LaCie Network Space Mini v2"; compatible = "lacie,netspace_mini_v2", "marvell,kirkwood-88f6192", "marvell,kirkwood"; diff --git a/arch/arm/boot/dts/mmp2.dtsi b/arch/arm/boot/dts/mmp2.dtsi index 1429ac0..4e8b08c 100644 --- a/arch/arm/boot/dts/mmp2.dtsi +++ b/arch/arm/boot/dts/mmp2.dtsi @@ -160,7 +160,7 @@ }; gpio@d4019000 { - compatible = "mrvl,mmp-gpio"; + compatible = "marvell,mmp2-gpio"; #address-cells = <1>; #size-cells = <1>; reg = <0xd4019000 0x1000>; diff --git a/arch/arm/boot/dts/pxa168.dtsi b/arch/arm/boot/dts/pxa168.dtsi index 31a7186..975dad2 100644 --- a/arch/arm/boot/dts/pxa168.dtsi +++ b/arch/arm/boot/dts/pxa168.dtsi @@ -77,7 +77,7 @@ }; gpio@d4019000 { - compatible = "mrvl,mmp-gpio"; + compatible = "marvell,mmp-gpio"; #address-cells = <1>; #size-cells = <1>; reg = <0xd4019000 0x1000>; diff --git a/arch/arm/boot/dts/pxa910.dtsi b/arch/arm/boot/dts/pxa910.dtsi index 825aaca..0247c62 100644 --- a/arch/arm/boot/dts/pxa910.dtsi +++ b/arch/arm/boot/dts/pxa910.dtsi @@ -89,7 +89,7 @@ }; gpio@d4019000 { - compatible = "mrvl,mmp-gpio"; + compatible = "marvell,mmp-gpio"; #address-cells = <1>; #size-cells = <1>; reg = <0xd4019000 0x1000>; diff --git a/arch/arm/boot/dts/r8a7779-marzen-reference.dts b/arch/arm/boot/dts/r8a7779-marzen-reference.dts new file mode 100644 index 0000000..72be4c8 --- /dev/null +++ b/arch/arm/boot/dts/r8a7779-marzen-reference.dts @@ -0,0 +1,47 @@ +/* + * Reference Device Tree Source for the Marzen board + * + * Copyright (C) 2013 Renesas Solutions Corp. + * Copyright (C) 2013 Simon Horman + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/dts-v1/; +/include/ "r8a7779.dtsi" + +/ { + model = "marzen"; + compatible = "renesas,marzen-reference", "renesas,r8a7779"; + + chosen { + bootargs = "console=ttySC2,115200 earlyprintk=sh-sci.2,115200 ignore_loglevel root=/dev/nfs ip=on"; + }; + + memory { + device_type = "memory"; + reg = <0x60000000 0x40000000>; + }; + + fixedregulator3v3: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + lan0@18000000 { + compatible = "smsc,lan9220", "smsc,lan9115"; + reg = <0x18000000 0x100>; + phy-mode = "mii"; + interrupt-parent = <&gic>; + interrupts = <0 28 0x4>; + reg-io-width = <4>; + vddvario-supply = <&fixedregulator3v3>; + vdd33a-supply = <&fixedregulator3v3>; + }; +}; diff --git a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts new file mode 100644 index 0000000..f33b5cc --- /dev/null +++ b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts @@ -0,0 +1,66 @@ +/* + * Device Tree Source for the KZM-A9-GT board + * + * Copyright (C) 2012 Horms Solutions Ltd. + * + * Based on sh73a0-kzm9g.dts + * Copyright (C) 2012 Renesas Solutions Corp. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/dts-v1/; +/include/ "sh73a0.dtsi" + +/ { + model = "KZM-A9-GT"; + compatible = "renesas,kzm9g-reference", "renesas,sh73a0"; + + chosen { + bootargs = "console=tty0 console=ttySC4,115200 root=/dev/nfs ip=dhcp ignore_loglevel earlyprintk=sh-sci.4,115200"; + }; + + memory { + device_type = "memory"; + reg = <0x41000000 0x1e800000>; + }; + + reg_1p8v: regulator@0 { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + reg_3p3v: regulator@1 { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; +}; + +&mmcif { + bus-width = <8>; + vmmc-supply = <®_1p8v>; + status = "okay"; +}; + +&sdhi0 { + vmmc-supply = <®_3p3v>; + bus-width = <4>; + status = "okay"; +}; + +&sdhi2 { + vmmc-supply = <®_3p3v>; + bus-width = <4>; + broken-cd; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sh73a0-reference.dtsi b/arch/arm/boot/dts/sh73a0-reference.dtsi deleted file mode 100644 index d4bb012..0000000 --- a/arch/arm/boot/dts/sh73a0-reference.dtsi +++ /dev/null @@ -1,24 +0,0 @@ -/* - * Device Tree Source for the SH73A0 SoC - * - * Copyright (C) 2012 Renesas Solutions Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ - -/include/ "sh73a0.dtsi" - -/ { - compatible = "renesas,sh73a0"; - - mmcif: mmcif@0x10010000 { - compatible = "renesas,sh-mmcif"; - reg = <0xe6bd0000 0x100>; - interrupt-parent = <&gic>; - interrupts = <0 140 0x4 - 0 141 0x4>; - reg-io-width = <4>; - }; -}; diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi index 8a59465..3e4d383 100644 --- a/arch/arm/boot/dts/sh73a0.dtsi +++ b/arch/arm/boot/dts/sh73a0.dtsi @@ -97,4 +97,48 @@ 0 189 0x4 0 190 0x4>; }; + + mmcif: mmcif@0x10010000 { + compatible = "renesas,sh-mmcif"; + reg = <0xe6bd0000 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 140 0x4 + 0 141 0x4>; + reg-io-width = <4>; + status = "disabled"; + }; + + sdhi0: sdhi@0xee100000 { + compatible = "renesas,r8a7740-sdhi"; + reg = <0xee100000 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 83 4 + 0 84 4 + 0 85 4>; + cap-sd-highspeed; + status = "disabled"; + }; + + /* SDHI1 and SDHI2 have no CD pins, no need for CD IRQ */ + sdhi1: sdhi@0xee120000 { + compatible = "renesas,r8a7740-sdhi"; + reg = <0xee120000 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 88 4 + 0 89 4>; + toshiba,mmc-wrprotect-disable; + cap-sd-highspeed; + status = "disabled"; + }; + + sdhi2: sdhi@0xee140000 { + compatible = "renesas,r8a7740-sdhi"; + reg = <0xee140000 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 104 4 + 0 105 4>; + toshiba,mmc-wrprotect-disable; + cap-sd-highspeed; + status = "disabled"; + }; }; diff --git a/arch/arm/configs/da8xx_omapl_defconfig b/arch/arm/configs/da8xx_omapl_defconfig index 9aaad36..7c86813 100644 --- a/arch/arm/configs/da8xx_omapl_defconfig +++ b/arch/arm/configs/da8xx_omapl_defconfig @@ -5,6 +5,7 @@ CONFIG_POSIX_MQUEUE=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 +CONFIG_CGROUPS=y CONFIG_BLK_DEV_INITRD=y CONFIG_EXPERT=y CONFIG_MODULES=y diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig index 3edc78a..c86fd75 100644 --- a/arch/arm/configs/davinci_all_defconfig +++ b/arch/arm/configs/davinci_all_defconfig @@ -5,6 +5,7 @@ CONFIG_POSIX_MQUEUE=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 +CONFIG_CGROUPS=y CONFIG_BLK_DEV_INITRD=y CONFIG_EXPERT=y CONFIG_MODULES=y diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig index 3d8667f..a1d8252 100644 --- a/arch/arm/configs/kirkwood_defconfig +++ b/arch/arm/configs/kirkwood_defconfig @@ -10,45 +10,48 @@ CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set CONFIG_ARCH_KIRKWOOD=y +CONFIG_MACH_D2NET_V2=y CONFIG_MACH_DB88F6281_BP=y +CONFIG_MACH_DOCKSTAR=y +CONFIG_MACH_ESATA_SHEEVAPLUG=y +CONFIG_MACH_GURUPLUG=y +CONFIG_MACH_INETSPACE_V2=y +CONFIG_MACH_MV88F6281GTW_GE=y +CONFIG_MACH_NET2BIG_V2=y +CONFIG_MACH_NET5BIG_V2=y +CONFIG_MACH_NETSPACE_MAX_V2=y +CONFIG_MACH_NETSPACE_V2=y +CONFIG_MACH_OPENRD_BASE=y +CONFIG_MACH_OPENRD_CLIENT=y +CONFIG_MACH_OPENRD_ULTIMATE=y CONFIG_MACH_RD88F6192_NAS=y CONFIG_MACH_RD88F6281=y -CONFIG_MACH_MV88F6281GTW_GE=y CONFIG_MACH_SHEEVAPLUG=y -CONFIG_MACH_ESATA_SHEEVAPLUG=y -CONFIG_MACH_GURUPLUG=y -CONFIG_MACH_DREAMPLUG_DT=y -CONFIG_MACH_ICONNECT_DT=y +CONFIG_MACH_T5325=y +CONFIG_MACH_TS219=y +CONFIG_MACH_TS41X=y +CONFIG_MACH_CLOUDBOX_DT=y CONFIG_MACH_DLINK_KIRKWOOD_DT=y -CONFIG_MACH_IB62X0_DT=y -CONFIG_MACH_TS219_DT=y CONFIG_MACH_DOCKSTAR_DT=y +CONFIG_MACH_DREAMPLUG_DT=y CONFIG_MACH_GOFLEXNET_DT=y -CONFIG_MACH_LSXL_DT=y +CONFIG_MACH_GURUPLUG_DT=y +CONFIG_MACH_IB62X0_DT=y +CONFIG_MACH_ICONNECT_DT=y +CONFIG_MACH_INETSPACE_V2_DT=y CONFIG_MACH_IOMEGA_IX2_200_DT=y CONFIG_MACH_KM_KIRKWOOD_DT=y -CONFIG_MACH_INETSPACE_V2_DT=y +CONFIG_MACH_LSXL_DT=y CONFIG_MACH_MPLCEC4_DT=y -CONFIG_MACH_NETSPACE_V2_DT=y -CONFIG_MACH_NETSPACE_MAX_V2_DT=y CONFIG_MACH_NETSPACE_LITE_V2_DT=y +CONFIG_MACH_NETSPACE_MAX_V2_DT=y CONFIG_MACH_NETSPACE_MINI_V2_DT=y +CONFIG_MACH_NETSPACE_V2_DT=y +CONFIG_MACH_NSA310_DT=y CONFIG_MACH_OPENBLOCKS_A6_DT=y +CONFIG_MACH_READYNAS_DT=y CONFIG_MACH_TOPKICK_DT=y -CONFIG_MACH_TS219=y -CONFIG_MACH_TS41X=y -CONFIG_MACH_DOCKSTAR=y -CONFIG_MACH_OPENRD_BASE=y -CONFIG_MACH_OPENRD_CLIENT=y -CONFIG_MACH_OPENRD_ULTIMATE=y -CONFIG_MACH_NETSPACE_V2=y -CONFIG_MACH_INETSPACE_V2=y -CONFIG_MACH_NETSPACE_MAX_V2=y -CONFIG_MACH_D2NET_V2=y -CONFIG_MACH_NET2BIG_V2=y -CONFIG_MACH_NET5BIG_V2=y -CONFIG_MACH_T5325=y -CONFIG_MACH_NSA310_DT=y +CONFIG_MACH_TS219_DT=y # CONFIG_CPU_FEROCEON_OLD_ID is not set CONFIG_PREEMPT=y CONFIG_AEABI=y diff --git a/arch/arm/configs/msm_defconfig b/arch/arm/configs/msm_defconfig index 2b8f7af..690b5f9 100644 --- a/arch/arm/configs/msm_defconfig +++ b/arch/arm/configs/msm_defconfig @@ -1,72 +1,137 @@ -CONFIG_EXPERIMENTAL=y +CONFIG_SYSVIPC=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_BLK_DEV_INITRD=y -CONFIG_SLAB=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS_ALL=y +CONFIG_EMBEDDED=y +# CONFIG_SLUB_DEBUG is not set +# CONFIG_COMPAT_BRK is not set +CONFIG_PROFILING=y +CONFIG_OPROFILE=y +CONFIG_KPROBES=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +CONFIG_PARTITION_ADVANCED=y CONFIG_ARCH_MSM=y -CONFIG_MACH_HALIBUT=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y +CONFIG_ARCH_MSM8X60=y +CONFIG_ARCH_MSM8960=y +CONFIG_SMP=y CONFIG_PREEMPT=y CONFIG_AEABI=y -# CONFIG_OABI_COMPAT is not set -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="mem=64M console=ttyMSM,115200n8" -CONFIG_PM=y +CONFIG_HIGHMEM=y +CONFIG_HIGHPTE=y +CONFIG_CLEANCACHE=y +CONFIG_CC_STACKPROTECTOR=y +CONFIG_ARM_APPENDED_DTB=y +CONFIG_ARM_ATAG_DTB_COMPAT=y +CONFIG_AUTO_ZRELADDR=y +CONFIG_VFP=y +CONFIG_NEON=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_NET=y +CONFIG_PACKET=y CONFIG_UNIX=y CONFIG_INET=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_ROUTE_VERBOSE=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_DIAG is not set +# CONFIG_INET_LRO is not set # CONFIG_IPV6 is not set -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y +CONFIG_CFG80211=y +CONFIG_RFKILL=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_RAM=y +CONFIG_SCSI=y +CONFIG_SCSI_TGT=y +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_SG=y +CONFIG_CHR_DEV_SCH=y +CONFIG_SCSI_MULTI_LUN=y +CONFIG_SCSI_CONSTANTS=y +CONFIG_SCSI_LOGGING=y +CONFIG_SCSI_SCAN_ASYNC=y CONFIG_NETDEVICES=y CONFIG_DUMMY=y -CONFIG_NET_ETHERNET=y -CONFIG_SMC91X=y -CONFIG_PPP=y -CONFIG_PPP_ASYNC=y -CONFIG_PPP_DEFLATE=y -CONFIG_PPP_BSDCOMP=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_PHYLIB=y +CONFIG_SLIP=y +CONFIG_SLIP_COMPRESSED=y +CONFIG_SLIP_MODE_SLIP6=y +CONFIG_USB_USBNET=y +# CONFIG_USB_NET_AX8817X is not set +# CONFIG_USB_NET_ZAURUS is not set CONFIG_INPUT_EVDEV=y # CONFIG_KEYBOARD_ATKBD is not set -# CONFIG_INPUT_MOUSE is not set +# CONFIG_MOUSE_PS2 is not set +CONFIG_INPUT_JOYSTICK=y CONFIG_INPUT_TOUCHSCREEN=y CONFIG_INPUT_MISC=y -# CONFIG_SERIO is not set -CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_INPUT_UINPUT=y +CONFIG_SERIO_LIBPS2=y +# CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_MSM=y CONFIG_SERIAL_MSM_CONSOLE=y -# CONFIG_LEGACY_PTYS is not set -# CONFIG_HW_RANDOM is not set +CONFIG_HW_RANDOM=y CONFIG_I2C=y -# CONFIG_HWMON is not set -CONFIG_VIDEO_OUTPUT_CONTROL=y +CONFIG_I2C_CHARDEV=y +CONFIG_SPI=y +CONFIG_SSBI=y +CONFIG_DEBUG_GPIO=y +CONFIG_GPIO_SYSFS=y +CONFIG_POWER_SUPPLY=y +CONFIG_THERMAL=y +CONFIG_REGULATOR=y +CONFIG_MEDIA_SUPPORT=y CONFIG_FB=y -CONFIG_FB_MODE_HELPERS=y -CONFIG_FB_TILEBLITTING=y -CONFIG_FB_MSM=y -# CONFIG_VGA_CONSOLE is not set -CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_SOUND=y +CONFIG_SND=y +CONFIG_SND_DYNAMIC_MINORS=y +# CONFIG_SND_ARM is not set +# CONFIG_SND_SPI is not set +# CONFIG_SND_USB is not set +CONFIG_SND_SOC=y +CONFIG_HID_BATTERY_STRENGTH=y +CONFIG_USB=y +CONFIG_USB_PHY=y +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y +CONFIG_USB_MON=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_MSM=y +CONFIG_USB_ACM=y +CONFIG_USB_SERIAL=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_DEBUG_FILES=y +CONFIG_USB_GADGET_VBUS_DRAW=500 CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_INOTIFY=y +CONFIG_RTC_CLASS=y +CONFIG_STAGING=y +CONFIG_MSM_IOMMU=y +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +CONFIG_EXT4_FS=y +CONFIG_FUSE_FS=y +CONFIG_VFAT_FS=y CONFIG_TMPFS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +CONFIG_CIFS=y +CONFIG_PRINTK_TIME=y CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_KERNEL=y -CONFIG_SCHEDSTATS=y -CONFIG_DEBUG_MUTEXES=y -CONFIG_DEBUG_SPINLOCK_SLEEP=y +CONFIG_LOCKUP_DETECTOR=y +# CONFIG_DETECT_HUNG_TASK is not set +# CONFIG_SCHED_DEBUG is not set +CONFIG_TIMER_STATS=y CONFIG_DEBUG_INFO=y -CONFIG_DEBUG_LL=y +CONFIG_DYNAMIC_DEBUG=y diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index bd07864..33903ca 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -93,6 +93,7 @@ CONFIG_BLK_DEV_RAM_SIZE=16384 CONFIG_SENSORS_LIS3LV02D=m CONFIG_SENSORS_TSL2550=m CONFIG_SENSORS_LIS3_I2C=m +CONFIG_BMP085_I2C=m CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_SCSI_MULTI_LUN=y diff --git a/arch/arm/include/debug/pxa.S b/arch/arm/include/debug/pxa.S new file mode 100644 index 0000000..e1e795a --- /dev/null +++ b/arch/arm/include/debug/pxa.S @@ -0,0 +1,33 @@ +/* + * Early serial output macro for Marvell PXA/MMP SoC + * + * Copyright (C) 1994-1999 Russell King + * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks + * + * Copyright (C) 2013 Haojian Zhuang + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#if defined(CONFIG_DEBUG_PXA_UART1) +#define PXA_UART_REG_PHYS_BASE 0x40100000 +#define PXA_UART_REG_VIRT_BASE 0xf2100000 +#elif defined(CONFIG_DEBUG_MMP_UART2) +#define PXA_UART_REG_PHYS_BASE 0xd4017000 +#define PXA_UART_REG_VIRT_BASE 0xfe017000 +#elif defined(CONFIG_DEBUG_MMP_UART3) +#define PXA_UART_REG_PHYS_BASE 0xd4018000 +#define PXA_UART_REG_VIRT_BASE 0xfe018000 +#else +#error "Select uart for DEBUG_LL" +#endif + + .macro addruart, rp, rv, tmp + ldr \rp, =PXA_UART_REG_PHYS_BASE + ldr \rv, =PXA_UART_REG_VIRT_BASE + .endm + +#define UART_SHIFT 2 +#include <asm/hardware/debug-8250.S> diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c index 12e6f75..1332de8 100644 --- a/arch/arm/mach-davinci/board-da830-evm.c +++ b/arch/arm/mach-davinci/board-da830-evm.c @@ -297,11 +297,7 @@ static const short da830_evm_emif25_pins[] = { -1 }; -#if defined(CONFIG_MMC_DAVINCI) || defined(CONFIG_MMC_DAVINCI_MODULE) -#define HAS_MMC 1 -#else -#define HAS_MMC 0 -#endif +#define HAS_MMC IS_ENABLED(CONFIG_MMC_DAVINCI) #ifdef CONFIG_DA830_UI_NAND static struct mtd_partition da830_evm_nand_partitions[] = { diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index dcc8710..8a24b6c 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -335,12 +335,7 @@ static const short da850_evm_nor_pins[] = { -1 }; -#if defined(CONFIG_MMC_DAVINCI) || \ - defined(CONFIG_MMC_DAVINCI_MODULE) -#define HAS_MMC 1 -#else -#define HAS_MMC 0 -#endif +#define HAS_MMC IS_ENABLED(CONFIG_MMC_DAVINCI) static inline void da850_evm_setup_nor_nand(void) { @@ -401,7 +396,7 @@ enum da850_evm_ui_exp_pins { DA850_EVM_UI_EXP_PB1, }; -static const char const *da850_evm_ui_exp[] = { +static const char * const da850_evm_ui_exp[] = { [DA850_EVM_UI_EXP_SEL_C] = "sel_c", [DA850_EVM_UI_EXP_SEL_B] = "sel_b", [DA850_EVM_UI_EXP_SEL_A] = "sel_a", @@ -565,7 +560,7 @@ enum da850_evm_bb_exp_pins { DA850_EVM_BB_EXP_USER_SW8 }; -static const char const *da850_evm_bb_exp[] = { +static const char * const da850_evm_bb_exp[] = { [DA850_EVM_BB_EXP_DEEP_SLEEP_EN] = "deep_sleep_en", [DA850_EVM_BB_EXP_SW_RST] = "sw_rst", [DA850_EVM_BB_EXP_TP_23] = "tp_23", @@ -1577,6 +1572,11 @@ static __init void da850_evm_init(void) pr_warn("%s: SATA registration failed: %d\n", __func__, ret); da850_evm_setup_mac_addr(); + + ret = da8xx_register_rproc(); + if (ret) + pr_warn("%s: dsp/rproc registration failed: %d\n", + __func__, ret); } #ifdef CONFIG_SERIAL_8250_CONSOLE @@ -1604,4 +1604,5 @@ MACHINE_START(DAVINCI_DA850_EVM, "DaVinci DA850/OMAP-L138/AM18x EVM") .init_late = davinci_init_late, .dma_zone_size = SZ_128M, .restart = da8xx_restart, + .reserve = da8xx_rproc_reserve_cma, MACHINE_END diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index e62108f..a33686a 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -749,26 +749,11 @@ static int davinci_phy_fixup(struct phy_device *phydev) return 0; } -#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \ - defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE) -#define HAS_ATA 1 -#else -#define HAS_ATA 0 -#endif - -#if defined(CONFIG_MTD_PHYSMAP) || \ - defined(CONFIG_MTD_PHYSMAP_MODULE) -#define HAS_NOR 1 -#else -#define HAS_NOR 0 -#endif - -#if defined(CONFIG_MTD_NAND_DAVINCI) || \ - defined(CONFIG_MTD_NAND_DAVINCI_MODULE) -#define HAS_NAND 1 -#else -#define HAS_NAND 0 -#endif +#define HAS_ATA IS_ENABLED(CONFIG_BLK_DEV_PALMCHIP_BK3710) + +#define HAS_NOR IS_ENABLED(CONFIG_MTD_PHYSMAP) + +#define HAS_NAND IS_ENABLED(CONFIG_MTD_NAND_DAVINCI) static __init void davinci_evm_init(void) { diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c index fc4871a..fbb8e5a 100644 --- a/arch/arm/mach-davinci/board-dm646x-evm.c +++ b/arch/arm/mach-davinci/board-dm646x-evm.c @@ -117,12 +117,7 @@ static struct platform_device davinci_nand_device = { }, }; -#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \ - defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE) -#define HAS_ATA 1 -#else -#define HAS_ATA 0 -#endif +#define HAS_ATA IS_ENABLED(CONFIG_BLK_DEV_PALMCHIP_BK3710) /* CPLD Register 0 bits to control ATA */ #define DM646X_EVM_ATA_RST BIT(0) diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c index b70e83c..2bc112a 100644 --- a/arch/arm/mach-davinci/board-neuros-osd2.c +++ b/arch/arm/mach-davinci/board-neuros-osd2.c @@ -166,20 +166,9 @@ static struct davinci_mmc_config davinci_ntosd2_mmc_config = { .wires = 4, }; +#define HAS_ATA IS_ENABLED(CONFIG_BLK_DEV_PALMCHIP_BK3710) -#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \ - defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE) -#define HAS_ATA 1 -#else -#define HAS_ATA 0 -#endif - -#if defined(CONFIG_MTD_NAND_DAVINCI) || \ - defined(CONFIG_MTD_NAND_DAVINCI_MODULE) -#define HAS_NAND 1 -#else -#define HAS_NAND 0 -#endif +#define HAS_NAND IS_ENABLED(CONFIG_MTD_NAND_DAVINCI) static __init void davinci_ntosd2_init(void) { diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c index 328dbd8..b8c20de 100644 --- a/arch/arm/mach-davinci/board-omapl138-hawk.c +++ b/arch/arm/mach-davinci/board-omapl138-hawk.c @@ -310,6 +310,11 @@ static __init void omapl138_hawk_init(void) if (ret) pr_warn("%s: watchdog registration failed: %d\n", __func__, ret); + + ret = da8xx_register_rproc(); + if (ret) + pr_warn("%s: dsp/rproc registration failed: %d\n", + __func__, ret); } #ifdef CONFIG_SERIAL_8250_CONSOLE @@ -337,4 +342,5 @@ MACHINE_START(OMAPL138_HAWKBOARD, "AM18x/OMAP-L138 Hawkboard") .init_late = davinci_init_late, .dma_zone_size = SZ_128M, .restart = da8xx_restart, + .reserve = da8xx_rproc_reserve_cma, MACHINE_END diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c index f6927df..a7068a3 100644 --- a/arch/arm/mach-davinci/devices.c +++ b/arch/arm/mach-davinci/devices.c @@ -119,7 +119,7 @@ void __init davinci_init_ide(void) platform_device_register(&ide_device); } -#if defined(CONFIG_MMC_DAVINCI) || defined(CONFIG_MMC_DAVINCI_MODULE) +#if IS_ENABLED(CONFIG_MMC_DAVINCI) static u64 mmcsd0_dma_mask = DMA_BIT_MASK(32); diff --git a/arch/arm/mach-davinci/usb.c b/arch/arm/mach-davinci/usb.c index 2b4c648..b0a6b52 100644 --- a/arch/arm/mach-davinci/usb.c +++ b/arch/arm/mach-davinci/usb.c @@ -18,7 +18,7 @@ #define DA8XX_USB0_BASE 0x01e00000 #define DA8XX_USB1_BASE 0x01e25000 -#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) +#if IS_ENABLED(CONFIG_USB_MUSB_HDRC) static struct musb_hdrc_eps_bits musb_eps[] = { { "ep1_tx", 8, }, { "ep1_rx", 8, }, diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig index 7b6a64b..7509a89 100644 --- a/arch/arm/mach-kirkwood/Kconfig +++ b/arch/arm/mach-kirkwood/Kconfig @@ -2,23 +2,41 @@ if ARCH_KIRKWOOD menu "Marvell Kirkwood Implementations" +config MACH_D2NET_V2 + bool "LaCie d2 Network v2 NAS Board" + help + Say 'Y' here if you want your kernel to support the + LaCie d2 Network v2 NAS. + config MACH_DB88F6281_BP bool "Marvell DB-88F6281-BP Development Board" help Say 'Y' here if you want your kernel to support the Marvell DB-88F6281-BP Development Board. -config MACH_RD88F6192_NAS - bool "Marvell RD-88F6192-NAS Reference Board" +config MACH_DOCKSTAR + bool "Seagate FreeAgent DockStar" help Say 'Y' here if you want your kernel to support the - Marvell RD-88F6192-NAS Reference Board. + Seagate FreeAgent DockStar. -config MACH_RD88F6281 - bool "Marvell RD-88F6281 Reference Board" +config MACH_ESATA_SHEEVAPLUG + bool "Marvell eSATA SheevaPlug Reference Board" help Say 'Y' here if you want your kernel to support the - Marvell RD-88F6281 Reference Board. + Marvell eSATA SheevaPlug Reference Board. + +config MACH_GURUPLUG + bool "Marvell GuruPlug Reference Board" + help + Say 'Y' here if you want your kernel to support the + Marvell GuruPlug Reference Board. + +config MACH_INETSPACE_V2 + bool "LaCie Internet Space v2 NAS Board" + help + Say 'Y' here if you want your kernel to support the + LaCie Internet Space v2 NAS. config MACH_MV88F6281GTW_GE bool "Marvell 88F6281 GTW GE Board" @@ -26,23 +44,93 @@ config MACH_MV88F6281GTW_GE Say 'Y' here if you want your kernel to support the Marvell 88F6281 GTW GE Board. +config MACH_NET2BIG_V2 + bool "LaCie 2Big Network v2 NAS Board" + help + Say 'Y' here if you want your kernel to support the + LaCie 2Big Network v2 NAS. + +config MACH_NET5BIG_V2 + bool "LaCie 5Big Network v2 NAS Board" + help + Say 'Y' here if you want your kernel to support the + LaCie 5Big Network v2 NAS. + +config MACH_NETSPACE_MAX_V2 + bool "LaCie Network Space Max v2 NAS Board" + help + Say 'Y' here if you want your kernel to support the + LaCie Network Space Max v2 NAS. + +config MACH_NETSPACE_V2 + bool "LaCie Network Space v2 NAS Board" + help + Say 'Y' here if you want your kernel to support the + LaCie Network Space v2 NAS. + +config MACH_OPENRD + bool + +config MACH_OPENRD_BASE + bool "Marvell OpenRD Base Board" + select MACH_OPENRD + help + Say 'Y' here if you want your kernel to support the + Marvell OpenRD Base Board. + +config MACH_OPENRD_CLIENT + bool "Marvell OpenRD Client Board" + select MACH_OPENRD + help + Say 'Y' here if you want your kernel to support the + Marvell OpenRD Client Board. + +config MACH_OPENRD_ULTIMATE + bool "Marvell OpenRD Ultimate Board" + select MACH_OPENRD + help + Say 'Y' here if you want your kernel to support the + Marvell OpenRD Ultimate Board. + +config MACH_RD88F6192_NAS + bool "Marvell RD-88F6192-NAS Reference Board" + help + Say 'Y' here if you want your kernel to support the + Marvell RD-88F6192-NAS Reference Board. + +config MACH_RD88F6281 + bool "Marvell RD-88F6281 Reference Board" + help + Say 'Y' here if you want your kernel to support the + Marvell RD-88F6281 Reference Board. + config MACH_SHEEVAPLUG bool "Marvell SheevaPlug Reference Board" help Say 'Y' here if you want your kernel to support the Marvell SheevaPlug Reference Board. -config MACH_ESATA_SHEEVAPLUG - bool "Marvell eSATA SheevaPlug Reference Board" +config MACH_T5325 + bool "HP t5325 Thin Client" help Say 'Y' here if you want your kernel to support the - Marvell eSATA SheevaPlug Reference Board. + HP t5325 Thin Client. -config MACH_GURUPLUG - bool "Marvell GuruPlug Reference Board" +config MACH_TS219 + bool "QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and TS-219P+ Turbo NAS" help Say 'Y' here if you want your kernel to support the - Marvell GuruPlug Reference Board. + QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and + TS-219P+ Turbo NAS devices. + +config MACH_TS41X + bool "QNAP TS-410, TS-410U, TS-419P, TS-419P+ and TS-419U Turbo NAS" + help + Say 'Y' here if you want your kernel to support the + QNAP TS-410, TS-410U, TS-419P, TS-419P+ and TS-419U Turbo + NAS devices. + +comment "Device tree entries" config ARCH_KIRKWOOD_DT bool "Marvell Kirkwood Flattened Device Tree" @@ -58,12 +146,27 @@ config ARCH_KIRKWOOD_DT Say 'Y' here if you want your kernel to support the Marvell Kirkwood using flattened device tree. -config MACH_GURUPLUG_DT - bool "Marvell GuruPlug Reference Board (Flattened Device Tree)" +config MACH_CLOUDBOX_DT + bool "LaCie CloudBox NAS (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + help + Say 'Y' here if you want your kernel to support the LaCie + CloudBox NAS, using Flattened Device Tree. + +config MACH_DLINK_KIRKWOOD_DT + bool "D-Link Kirkwood-based NAS (Flattened Device Tree)" select ARCH_KIRKWOOD_DT help Say 'Y' here if you want your kernel to support the - Marvell GuruPlug Reference Board (Flattened Device Tree). + Kirkwood-based D-Link NASes such as DNS-320 & DNS-325, + using Flattened Device Tree. + +config MACH_DOCKSTAR_DT + bool "Seagate FreeAgent Dockstar (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + help + Say 'Y' here if you want your kernel to support the + Seagate FreeAgent Dockstar (Flattened Device Tree). config MACH_DREAMPLUG_DT bool "Marvell DreamPlug (Flattened Device Tree)" @@ -72,19 +175,19 @@ config MACH_DREAMPLUG_DT Say 'Y' here if you want your kernel to support the Marvell DreamPlug (Flattened Device Tree). -config MACH_ICONNECT_DT - bool "Iomega Iconnect (Flattened Device Tree)" +config MACH_GOFLEXNET_DT + bool "Seagate GoFlex Net (Flattened Device Tree)" select ARCH_KIRKWOOD_DT help - Say 'Y' here to enable Iomega Iconnect support. + Say 'Y' here if you want your kernel to support the + Seagate GoFlex Net (Flattened Device Tree). -config MACH_DLINK_KIRKWOOD_DT - bool "D-Link Kirkwood-based NAS (Flattened Device Tree)" +config MACH_GURUPLUG_DT + bool "Marvell GuruPlug Reference Board (Flattened Device Tree)" select ARCH_KIRKWOOD_DT help Say 'Y' here if you want your kernel to support the - Kirkwood-based D-Link NASes such as DNS-320 & DNS-325, - using Flattened Device Tree. + Marvell GuruPlug Reference Board (Flattened Device Tree). config MACH_IB62X0_DT bool "RaidSonic IB-NAS6210, IB-NAS6220 (Flattened Device Tree)" @@ -94,41 +197,18 @@ config MACH_IB62X0_DT RaidSonic IB-NAS6210 & IB-NAS6220 devices, using Flattened Device Tree. -config MACH_TS219_DT - bool "Device Tree for QNAP TS-11X, TS-21X NAS" - select ARCH_KIRKWOOD_DT - select ARM_APPENDED_DTB - select ARM_ATAG_DTB_COMPAT - help - Say 'Y' here if you want your kernel to support the QNAP - TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and - TS-219P+ Turbo NAS devices using Fattened Device Tree. - There are two different Device Tree descriptions, depending - on if the device is based on an if the board uses the MV6281 - or MV6282. If you have the wrong one, the buttons will not - work. - -config MACH_DOCKSTAR_DT - bool "Seagate FreeAgent Dockstar (Flattened Device Tree)" - select ARCH_KIRKWOOD_DT - help - Say 'Y' here if you want your kernel to support the - Seagate FreeAgent Dockstar (Flattened Device Tree). - -config MACH_GOFLEXNET_DT - bool "Seagate GoFlex Net (Flattened Device Tree)" +config MACH_ICONNECT_DT + bool "Iomega Iconnect (Flattened Device Tree)" select ARCH_KIRKWOOD_DT help - Say 'Y' here if you want your kernel to support the - Seagate GoFlex Net (Flattened Device Tree). + Say 'Y' here to enable Iomega Iconnect support. -config MACH_LSXL_DT - bool "Buffalo Linkstation LS-XHL, LS-CHLv2 (Flattened Device Tree)" +config MACH_INETSPACE_V2_DT + bool "LaCie Internet Space v2 NAS (Flattened Device Tree)" select ARCH_KIRKWOOD_DT help - Say 'Y' here if you want your kernel to support the - Buffalo Linkstation LS-XHL & LS-CHLv2 devices, using - Flattened Device Tree. + Say 'Y' here if you want your kernel to support the LaCie + Internet Space v2 NAS, using Flattened Device Tree. config MACH_IOMEGA_IX2_200_DT bool "Iomega StorCenter ix2-200 (Flattened Device Tree)" @@ -144,12 +224,13 @@ config MACH_KM_KIRKWOOD_DT Say 'Y' here if you want your kernel to support the Keymile Kirkwood Reference Desgin, using Flattened Device Tree. -config MACH_INETSPACE_V2_DT - bool "LaCie Internet Space v2 NAS (Flattened Device Tree)" +config MACH_LSXL_DT + bool "Buffalo Linkstation LS-XHL, LS-CHLv2 (Flattened Device Tree)" select ARCH_KIRKWOOD_DT help - Say 'Y' here if you want your kernel to support the LaCie - Internet Space v2 NAS, using Flattened Device Tree. + Say 'Y' here if you want your kernel to support the + Buffalo Linkstation LS-XHL & LS-CHLv2 devices, using + Flattened Device Tree. config MACH_MPLCEC4_DT bool "MPL CEC4 (Flattened Device Tree)" @@ -158,12 +239,12 @@ config MACH_MPLCEC4_DT Say 'Y' here if you want your kernel to support the MPL CEC4 (Flattened Device Tree). -config MACH_NETSPACE_V2_DT - bool "LaCie Network Space v2 NAS (Flattened Device Tree)" +config MACH_NETSPACE_LITE_V2_DT + bool "LaCie Network Space Lite v2 NAS (Flattened Device Tree)" select ARCH_KIRKWOOD_DT help Say 'Y' here if you want your kernel to support the LaCie - Network Space v2 NAS, using Flattened Device Tree. + Network Space Lite v2 NAS, using Flattened Device Tree. config MACH_NETSPACE_MAX_V2_DT bool "LaCie Network Space Max v2 NAS (Flattened Device Tree)" @@ -172,128 +253,69 @@ config MACH_NETSPACE_MAX_V2_DT Say 'Y' here if you want your kernel to support the LaCie Network Space Max v2 NAS, using Flattened Device Tree. -config MACH_NETSPACE_LITE_V2_DT - bool "LaCie Network Space Lite v2 NAS (Flattened Device Tree)" - select ARCH_KIRKWOOD_DT - help - Say 'Y' here if you want your kernel to support the LaCie - Network Space Lite v2 NAS, using Flattened Device Tree. - config MACH_NETSPACE_MINI_V2_DT bool "LaCie Network Space Mini v2 NAS (Flattened Device Tree)" select ARCH_KIRKWOOD_DT help Say 'Y' here if you want your kernel to support the LaCie - Network Space Mini v2 NAS (aka SafeBox), using Flattened - Device Tree. + Network Space Mini v2 NAS using Flattened Device Tree. -config MACH_OPENBLOCKS_A6_DT - bool "Plat'Home OpenBlocks A6 (Flattened Device Tree)" - select ARCH_KIRKWOOD_DT - help - Say 'Y' here if you want your kernel to support the - Plat'Home OpenBlocks A6 (Flattened Device Tree). + This board is embedded in a product named CloudBox, which + provides automatic backup on a 100GB cloud storage. This + should not confused with a more recent LaCie NAS also named + CloudBox. For this last, the disk capacity is 1TB or above. -config MACH_TOPKICK_DT - bool "USI Topkick (Flattened Device Tree)" +config MACH_NETSPACE_V2_DT + bool "LaCie Network Space v2 NAS (Flattened Device Tree)" select ARCH_KIRKWOOD_DT help - Say 'Y' here if you want your kernel to support the - USI Topkick, using Flattened Device Tree - -config MACH_TS219 - bool "QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and TS-219P+ Turbo NAS" - help - Say 'Y' here if you want your kernel to support the - QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and - TS-219P+ Turbo NAS devices. - -config MACH_TS41X - bool "QNAP TS-410, TS-410U, TS-419P, TS-419P+ and TS-419U Turbo NAS" - help - Say 'Y' here if you want your kernel to support the - QNAP TS-410, TS-410U, TS-419P, TS-419P+ and TS-419U Turbo - NAS devices. - -config MACH_DOCKSTAR - bool "Seagate FreeAgent DockStar" - help - Say 'Y' here if you want your kernel to support the - Seagate FreeAgent DockStar. - -config MACH_OPENRD - bool - -config MACH_OPENRD_BASE - bool "Marvell OpenRD Base Board" - select MACH_OPENRD - help - Say 'Y' here if you want your kernel to support the - Marvell OpenRD Base Board. - -config MACH_OPENRD_CLIENT - bool "Marvell OpenRD Client Board" - select MACH_OPENRD - help - Say 'Y' here if you want your kernel to support the - Marvell OpenRD Client Board. - -config MACH_OPENRD_ULTIMATE - bool "Marvell OpenRD Ultimate Board" - select MACH_OPENRD - help - Say 'Y' here if you want your kernel to support the - Marvell OpenRD Ultimate Board. - -config MACH_NETSPACE_V2 - bool "LaCie Network Space v2 NAS Board" - help - Say 'Y' here if you want your kernel to support the - LaCie Network Space v2 NAS. - -config MACH_INETSPACE_V2 - bool "LaCie Internet Space v2 NAS Board" - help - Say 'Y' here if you want your kernel to support the - LaCie Internet Space v2 NAS. - -config MACH_NETSPACE_MAX_V2 - bool "LaCie Network Space Max v2 NAS Board" - help - Say 'Y' here if you want your kernel to support the - LaCie Network Space Max v2 NAS. + Say 'Y' here if you want your kernel to support the LaCie + Network Space v2 NAS, using Flattened Device Tree. -config MACH_D2NET_V2 - bool "LaCie d2 Network v2 NAS Board" +config MACH_NSA310_DT + bool "ZyXEL NSA-310 (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + select ARM_ATAG_DTB_COMPAT help Say 'Y' here if you want your kernel to support the - LaCie d2 Network v2 NAS. + ZyXEL NSA-310 board (Flattened Device Tree). -config MACH_NET2BIG_V2 - bool "LaCie 2Big Network v2 NAS Board" +config MACH_OPENBLOCKS_A6_DT + bool "Plat'Home OpenBlocks A6 (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT help Say 'Y' here if you want your kernel to support the - LaCie 2Big Network v2 NAS. + Plat'Home OpenBlocks A6 (Flattened Device Tree). -config MACH_NET5BIG_V2 - bool "LaCie 5Big Network v2 NAS Board" +config MACH_READYNAS_DT + bool "NETGEAR ReadyNAS Duo v2 (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + select ARM_APPENDED_DTB + select ARM_ATAG_DTB_COMPAT help Say 'Y' here if you want your kernel to support the - LaCie 5Big Network v2 NAS. + NETGEAR ReadyNAS Duo v2 using Fattened Device Tree. -config MACH_T5325 - bool "HP t5325 Thin Client" +config MACH_TOPKICK_DT + bool "USI Topkick (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT help Say 'Y' here if you want your kernel to support the - HP t5325 Thin Client. + USI Topkick, using Flattened Device Tree -config MACH_NSA310_DT - bool "ZyXEL NSA-310 (Flattened Device Tree)" +config MACH_TS219_DT + bool "Device Tree for QNAP TS-11X, TS-21X NAS" select ARCH_KIRKWOOD_DT + select ARM_APPENDED_DTB select ARM_ATAG_DTB_COMPAT help - Say 'Y' here if you want your kernel to support the - ZyXEL NSA-310 board (Flattened Device Tree). + Say 'Y' here if you want your kernel to support the QNAP + TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and + TS-219P+ Turbo NAS devices using Fattened Device Tree. + There are two different Device Tree descriptions, depending + on if the device is based on an if the board uses the MV6281 + or MV6282. If you have the wrong one, the buttons will not + work. endmenu diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile index 4cc4bee..cdbca32 100644 --- a/arch/arm/mach-kirkwood/Makefile +++ b/arch/arm/mach-kirkwood/Makefile @@ -1,42 +1,44 @@ obj-y += common.o addr-map.o irq.o pcie.o mpp.o +obj-$(CONFIG_MACH_D2NET_V2) += d2net_v2-setup.o lacie_v2-common.o obj-$(CONFIG_MACH_DB88F6281_BP) += db88f6281-bp-setup.o -obj-$(CONFIG_MACH_RD88F6192_NAS) += rd88f6192-nas-setup.o -obj-$(CONFIG_MACH_RD88F6281) += rd88f6281-setup.o -obj-$(CONFIG_MACH_MV88F6281GTW_GE) += mv88f6281gtw_ge-setup.o -obj-$(CONFIG_MACH_SHEEVAPLUG) += sheevaplug-setup.o +obj-$(CONFIG_MACH_DOCKSTAR) += dockstar-setup.o obj-$(CONFIG_MACH_ESATA_SHEEVAPLUG) += sheevaplug-setup.o obj-$(CONFIG_MACH_GURUPLUG) += guruplug-setup.o -obj-$(CONFIG_MACH_DOCKSTAR) += dockstar-setup.o -obj-$(CONFIG_MACH_TS219) += ts219-setup.o tsx1x-common.o -obj-$(CONFIG_MACH_TS41X) += ts41x-setup.o tsx1x-common.o -obj-$(CONFIG_MACH_OPENRD) += openrd-setup.o -obj-$(CONFIG_MACH_NETSPACE_V2) += netspace_v2-setup.o lacie_v2-common.o obj-$(CONFIG_MACH_INETSPACE_V2) += netspace_v2-setup.o lacie_v2-common.o -obj-$(CONFIG_MACH_NETSPACE_MAX_V2) += netspace_v2-setup.o lacie_v2-common.o -obj-$(CONFIG_MACH_D2NET_V2) += d2net_v2-setup.o lacie_v2-common.o +obj-$(CONFIG_MACH_MV88F6281GTW_GE) += mv88f6281gtw_ge-setup.o obj-$(CONFIG_MACH_NET2BIG_V2) += netxbig_v2-setup.o lacie_v2-common.o obj-$(CONFIG_MACH_NET5BIG_V2) += netxbig_v2-setup.o lacie_v2-common.o +obj-$(CONFIG_MACH_NETSPACE_MAX_V2) += netspace_v2-setup.o lacie_v2-common.o +obj-$(CONFIG_MACH_NETSPACE_V2) += netspace_v2-setup.o lacie_v2-common.o +obj-$(CONFIG_MACH_OPENRD) += openrd-setup.o +obj-$(CONFIG_MACH_RD88F6192_NAS) += rd88f6192-nas-setup.o +obj-$(CONFIG_MACH_RD88F6281) += rd88f6281-setup.o +obj-$(CONFIG_MACH_SHEEVAPLUG) += sheevaplug-setup.o obj-$(CONFIG_MACH_T5325) += t5325-setup.o +obj-$(CONFIG_MACH_TS219) += ts219-setup.o tsx1x-common.o +obj-$(CONFIG_MACH_TS41X) += ts41x-setup.o tsx1x-common.o obj-$(CONFIG_ARCH_KIRKWOOD_DT) += board-dt.o -obj-$(CONFIG_MACH_DREAMPLUG_DT) += board-dreamplug.o -obj-$(CONFIG_MACH_GURUPLUG_DT) += board-guruplug.o -obj-$(CONFIG_MACH_ICONNECT_DT) += board-iconnect.o +obj-$(CONFIG_MACH_CLOUDBOX_DT) += board-ns2.o obj-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += board-dnskw.o -obj-$(CONFIG_MACH_IB62X0_DT) += board-ib62x0.o -obj-$(CONFIG_MACH_TS219_DT) += board-ts219.o tsx1x-common.o obj-$(CONFIG_MACH_DOCKSTAR_DT) += board-dockstar.o +obj-$(CONFIG_MACH_DREAMPLUG_DT) += board-dreamplug.o obj-$(CONFIG_MACH_GOFLEXNET_DT) += board-goflexnet.o -obj-$(CONFIG_MACH_LSXL_DT) += board-lsxl.o +obj-$(CONFIG_MACH_GURUPLUG_DT) += board-guruplug.o +obj-$(CONFIG_MACH_IB62X0_DT) += board-ib62x0.o +obj-$(CONFIG_MACH_ICONNECT_DT) += board-iconnect.o +obj-$(CONFIG_MACH_INETSPACE_V2_DT) += board-ns2.o obj-$(CONFIG_MACH_IOMEGA_IX2_200_DT) += board-iomega_ix2_200.o obj-$(CONFIG_MACH_KM_KIRKWOOD_DT) += board-km_kirkwood.o -obj-$(CONFIG_MACH_INETSPACE_V2_DT) += board-ns2.o +obj-$(CONFIG_MACH_LSXL_DT) += board-lsxl.o obj-$(CONFIG_MACH_MPLCEC4_DT) += board-mplcec4.o -obj-$(CONFIG_MACH_NETSPACE_V2_DT) += board-ns2.o -obj-$(CONFIG_MACH_NETSPACE_MAX_V2_DT) += board-ns2.o obj-$(CONFIG_MACH_NETSPACE_LITE_V2_DT) += board-ns2.o +obj-$(CONFIG_MACH_NETSPACE_MAX_V2_DT) += board-ns2.o obj-$(CONFIG_MACH_NETSPACE_MINI_V2_DT) += board-ns2.o +obj-$(CONFIG_MACH_NETSPACE_V2_DT) += board-ns2.o obj-$(CONFIG_MACH_NSA310_DT) += board-nsa310.o obj-$(CONFIG_MACH_OPENBLOCKS_A6_DT) += board-openblocks_a6.o +obj-$(CONFIG_MACH_READYNAS_DT) += board-readynas.o obj-$(CONFIG_MACH_TOPKICK_DT) += board-usi_topkick.o +obj-$(CONFIG_MACH_TS219_DT) += board-ts219.o tsx1x-common.o diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c index d367aa6..7904758 100644 --- a/arch/arm/mach-kirkwood/board-dt.c +++ b/arch/arm/mach-kirkwood/board-dt.c @@ -139,16 +139,20 @@ static void __init kirkwood_dt_init(void) if (of_machine_is_compatible("keymile,km_kirkwood")) km_kirkwood_init(); - if (of_machine_is_compatible("lacie,inetspace_v2") || - of_machine_is_compatible("lacie,netspace_v2") || - of_machine_is_compatible("lacie,netspace_max_v2") || + if (of_machine_is_compatible("lacie,cloudbox") || + of_machine_is_compatible("lacie,inetspace_v2") || of_machine_is_compatible("lacie,netspace_lite_v2") || - of_machine_is_compatible("lacie,netspace_mini_v2")) + of_machine_is_compatible("lacie,netspace_max_v2") || + of_machine_is_compatible("lacie,netspace_mini_v2") || + of_machine_is_compatible("lacie,netspace_v2")) ns2_init(); if (of_machine_is_compatible("mpl,cec4")) mplcec4_init(); + if (of_machine_is_compatible("netgear,readynas-duo-v2")) + netgear_readynas_init(); + if (of_machine_is_compatible("plathome,openblocks-a6")) openblocks_a6_init(); @@ -171,12 +175,14 @@ static const char * const kirkwood_dt_board_compat[] = { "buffalo,lsxl", "iom,ix2-200", "keymile,km_kirkwood", + "lacie,cloudbox", "lacie,inetspace_v2", - "lacie,netspace_max_v2", - "lacie,netspace_v2", "lacie,netspace_lite_v2", + "lacie,netspace_max_v2", "lacie,netspace_mini_v2", + "lacie,netspace_v2", "mpl,cec4", + "netgear,readynas-duo-v2", "plathome,openblocks-a6", "usi,topkick", "zyxel,nsa310", diff --git a/arch/arm/mach-kirkwood/board-ns2.c b/arch/arm/mach-kirkwood/board-ns2.c index f2ea3b7..f8f6605 100644 --- a/arch/arm/mach-kirkwood/board-ns2.c +++ b/arch/arm/mach-kirkwood/board-ns2.c @@ -27,7 +27,8 @@ void __init ns2_init(void) /* * Basic setup. Needs to be called early. */ - if (of_machine_is_compatible("lacie,netspace_lite_v2") || + if (of_machine_is_compatible("lacie,cloudbox") || + of_machine_is_compatible("lacie,netspace_lite_v2") || of_machine_is_compatible("lacie,netspace_mini_v2")) ns2_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0); kirkwood_ge00_init(&ns2_ge00_data); diff --git a/arch/arm/mach-kirkwood/board-readynas.c b/arch/arm/mach-kirkwood/board-readynas.c new file mode 100644 index 0000000..fb42c20 --- /dev/null +++ b/arch/arm/mach-kirkwood/board-readynas.c @@ -0,0 +1,28 @@ +/* + * NETGEAR ReadyNAS Duo v2 Board setup for drivers not already + * converted to DT. + * + * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/mv643xx_eth.h> +#include <mach/kirkwood.h> +#include "common.h" + +static struct mv643xx_eth_platform_data netgear_readynas_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(0), +}; + +void __init netgear_readynas_init(void) +{ + kirkwood_ge00_init(&netgear_readynas_ge00_data); + kirkwood_pcie_init(KW_PCIE0); +} diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h index 5ed7056..3147be2 100644 --- a/arch/arm/mach-kirkwood/common.h +++ b/arch/arm/mach-kirkwood/common.h @@ -141,12 +141,24 @@ void openblocks_a6_init(void); static inline void openblocks_a6_init(void) {}; #endif +#ifdef CONFIG_MACH_READYNAS_DT +void netgear_readynas_init(void); +#else +static inline void netgear_readynas_init(void) {}; +#endif + #ifdef CONFIG_MACH_TOPKICK_DT void usi_topkick_init(void); #else static inline void usi_topkick_init(void) {}; #endif +#ifdef CONFIG_MACH_CLOUDBOX_DT +void cloudbox_init(void); +#else +static inline void cloudbox_init(void) {}; +#endif + /* early init functions not converted to fdt yet */ char *kirkwood_id(void); void kirkwood_l2_init(void); diff --git a/arch/arm/mach-mmp/aspenite.c b/arch/arm/mach-mmp/aspenite.c index 76901f4..5b660ec 100644 --- a/arch/arm/mach-mmp/aspenite.c +++ b/arch/arm/mach-mmp/aspenite.c @@ -9,6 +9,7 @@ * publishhed by the Free Software Foundation. */ #include <linux/gpio.h> +#include <linux/gpio-pxa.h> #include <linux/init.h> #include <linux/kernel.h> #include <linux/platform_device.h> @@ -110,6 +111,10 @@ static unsigned long common_pin_config[] __initdata = { GPIO121_KP_MKIN4, }; +static struct pxa_gpio_platform_data pxa168_gpio_pdata = { + .irq_base = MMP_GPIO_TO_IRQ(0), +}; + static struct smc91x_platdata smc91x_info = { .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, }; @@ -242,6 +247,8 @@ static void __init common_init(void) pxa168_add_nand(&aspenite_nand_info); pxa168_add_fb(&aspenite_lcd_info); pxa168_add_keypad(&aspenite_keypad_info); + platform_device_add_data(&pxa168_device_gpio, &pxa168_gpio_pdata, + sizeof(struct pxa_gpio_platform_data)); platform_device_register(&pxa168_device_gpio); /* off-chip devices */ diff --git a/arch/arm/mach-mmp/avengers_lite.c b/arch/arm/mach-mmp/avengers_lite.c index 1f94957..a451a0f 100644 --- a/arch/arm/mach-mmp/avengers_lite.c +++ b/arch/arm/mach-mmp/avengers_lite.c @@ -12,6 +12,7 @@ #include <linux/init.h> #include <linux/kernel.h> +#include <linux/gpio-pxa.h> #include <linux/platform_device.h> #include <asm/mach-types.h> @@ -32,12 +33,18 @@ static unsigned long avengers_lite_pin_config_V16F[] __initdata = { GPIO89_UART2_RXD, }; +static struct pxa_gpio_platform_data pxa168_gpio_pdata = { + .irq_base = MMP_GPIO_TO_IRQ(0), +}; + static void __init avengers_lite_init(void) { mfp_config(ARRAY_AND_SIZE(avengers_lite_pin_config_V16F)); /* on-chip devices */ pxa168_add_uart(2); + platform_device_add_data(&pxa168_device_gpio, &pxa168_gpio_pdata, + sizeof(struct pxa_gpio_platform_data)); platform_device_register(&pxa168_device_gpio); } diff --git a/arch/arm/mach-mmp/brownstone.c b/arch/arm/mach-mmp/brownstone.c index 2358011..ac25544 100644 --- a/arch/arm/mach-mmp/brownstone.c +++ b/arch/arm/mach-mmp/brownstone.c @@ -14,6 +14,7 @@ #include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/io.h> +#include <linux/gpio-pxa.h> #include <linux/regulator/machine.h> #include <linux/regulator/max8649.h> #include <linux/regulator/fixed.h> @@ -104,6 +105,10 @@ static unsigned long brownstone_pin_config[] __initdata = { GPIO89_GPIO, }; +static struct pxa_gpio_platform_data mmp2_gpio_pdata = { + .irq_base = MMP_GPIO_TO_IRQ(0), +}; + static struct regulator_consumer_supply max8649_supply[] = { REGULATOR_SUPPLY("vcc_core", NULL), }; @@ -202,6 +207,8 @@ static void __init brownstone_init(void) /* on-chip devices */ mmp2_add_uart(1); mmp2_add_uart(3); + platform_device_add_data(&mmp2_device_gpio, &mmp2_gpio_pdata, + sizeof(struct pxa_gpio_platform_data)); platform_device_register(&mmp2_device_gpio); mmp2_add_twsi(1, NULL, ARRAY_AND_SIZE(brownstone_twsi1_info)); mmp2_add_sdhost(0, &mmp2_sdh_platdata_mmc0); /* SD/MMC */ diff --git a/arch/arm/mach-mmp/clock-mmp2.c b/arch/arm/mach-mmp/clock-mmp2.c index 21d2200..53d77cb 100644 --- a/arch/arm/mach-mmp/clock-mmp2.c +++ b/arch/arm/mach-mmp/clock-mmp2.c @@ -98,7 +98,7 @@ static struct clk_lookup mmp2_clkregs[] = { INIT_CLKREG(&clk_twsi5, "pxa2xx-i2c.4", NULL), INIT_CLKREG(&clk_twsi6, "pxa2xx-i2c.5", NULL), INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL), - INIT_CLKREG(&clk_gpio, "pxa-gpio", NULL), + INIT_CLKREG(&clk_gpio, "mmp2-gpio", NULL), INIT_CLKREG(&clk_sdh0, "sdhci-pxav3.0", "PXA-SDHCLK"), INIT_CLKREG(&clk_sdh1, "sdhci-pxav3.1", "PXA-SDHCLK"), INIT_CLKREG(&clk_sdh2, "sdhci-pxav3.2", "PXA-SDHCLK"), diff --git a/arch/arm/mach-mmp/clock-pxa168.c b/arch/arm/mach-mmp/clock-pxa168.c index 5e6c18c..c572f21 100644 --- a/arch/arm/mach-mmp/clock-pxa168.c +++ b/arch/arm/mach-mmp/clock-pxa168.c @@ -78,7 +78,7 @@ static struct clk_lookup pxa168_clkregs[] = { INIT_CLKREG(&clk_ssp5, "pxa168-ssp.4", NULL), INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL), INIT_CLKREG(&clk_lcd, "pxa168-fb", NULL), - INIT_CLKREG(&clk_gpio, "pxa-gpio", NULL), + INIT_CLKREG(&clk_gpio, "mmp-gpio", NULL), INIT_CLKREG(&clk_keypad, "pxa27x-keypad", NULL), INIT_CLKREG(&clk_eth, "pxa168-eth", "MFUCLK"), INIT_CLKREG(&clk_usb, NULL, "PXA168-USBCLK"), diff --git a/arch/arm/mach-mmp/clock-pxa910.c b/arch/arm/mach-mmp/clock-pxa910.c index 933ea71..379e1df 100644 --- a/arch/arm/mach-mmp/clock-pxa910.c +++ b/arch/arm/mach-mmp/clock-pxa910.c @@ -56,7 +56,7 @@ static struct clk_lookup pxa910_clkregs[] = { INIT_CLKREG(&clk_pwm3, "pxa910-pwm.2", NULL), INIT_CLKREG(&clk_pwm4, "pxa910-pwm.3", NULL), INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL), - INIT_CLKREG(&clk_gpio, "pxa-gpio", NULL), + INIT_CLKREG(&clk_gpio, "mmp-gpio", NULL), INIT_CLKREG(&clk_u2o, NULL, "U2OCLK"), INIT_CLKREG(&clk_rtc, "sa1100-rtc", NULL), }; diff --git a/arch/arm/mach-mmp/flint.c b/arch/arm/mach-mmp/flint.c index 754c352..6291c33 100644 --- a/arch/arm/mach-mmp/flint.c +++ b/arch/arm/mach-mmp/flint.c @@ -16,6 +16,7 @@ #include <linux/smc91x.h> #include <linux/io.h> #include <linux/gpio.h> +#include <linux/gpio-pxa.h> #include <linux/interrupt.h> #include <asm/mach-types.h> @@ -77,6 +78,10 @@ static unsigned long flint_pin_config[] __initdata = { GPIO160_ND_RDY1, }; +static struct pxa_gpio_platform_data mmp2_gpio_pdata = { + .irq_base = MMP_GPIO_TO_IRQ(0), +}; + static struct smc91x_platdata flint_smc91x_info = { .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, }; @@ -111,6 +116,8 @@ static void __init flint_init(void) /* on-chip devices */ mmp2_add_uart(1); mmp2_add_uart(2); + platform_device_add_data(&mmp2_device_gpio, &mmp2_gpio_pdata, + sizeof(struct pxa_gpio_platform_data)); platform_device_register(&mmp2_device_gpio); /* off-chip devices */ diff --git a/arch/arm/mach-mmp/gplugd.c b/arch/arm/mach-mmp/gplugd.c index f62b68d..d81b247 100644 --- a/arch/arm/mach-mmp/gplugd.c +++ b/arch/arm/mach-mmp/gplugd.c @@ -11,6 +11,7 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/gpio.h> +#include <linux/gpio-pxa.h> #include <asm/mach/arch.h> #include <asm/mach-types.h> @@ -128,6 +129,10 @@ static unsigned long gplugd_pin_config[] __initdata = { GPIO116_I2S_TXD }; +static struct pxa_gpio_platform_data pxa168_gpio_pdata = { + .irq_base = MMP_GPIO_TO_IRQ(0), +}; + static struct i2c_board_info gplugd_i2c_board_info[] = { { .type = "isl1208", @@ -186,6 +191,8 @@ static void __init gplugd_init(void) pxa168_add_uart(3); pxa168_add_ssp(1); pxa168_add_twsi(0, NULL, ARRAY_AND_SIZE(gplugd_i2c_board_info)); + platform_device_add_data(&pxa168_device_gpio, &pxa168_gpio_pdata, + sizeof(struct pxa_gpio_platform_data)); platform_device_register(&pxa168_device_gpio); pxa168_add_eth(&gplugd_eth_platform_data); diff --git a/arch/arm/mach-mmp/include/mach/debug-macro.S b/arch/arm/mach-mmp/include/mach/debug-macro.S deleted file mode 100644 index 5c3cc29..0000000 --- a/arch/arm/mach-mmp/include/mach/debug-macro.S +++ /dev/null @@ -1,30 +0,0 @@ -/* arch/arm/mach-mmp/include/mach/debug-macro.S - * - * Debugging macro include header - * - * Copied from arch/arm/mach-pxa/include/mach/debug.S - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#if defined(CONFIG_DEBUG_MMP_UART2) -#define MMP_UART_OFFSET 0x00017000 -#elif defined(CONFIG_DEBUG_MMP_UART3) -#define MMP_UART_OFFSET 0x00018000 -#else -#error "Select uart for DEBUG_LL" -#endif - -#include <mach/addr-map.h> - - .macro addruart, rp, rv, tmp - ldr \rp, =APB_PHYS_BASE @ physical - ldr \rv, =APB_VIRT_BASE @ virtual - orr \rp, \rp, #MMP_UART_OFFSET - orr \rv, \rv, #MMP_UART_OFFSET - .endm - -#define UART_SHIFT 2 -#include <asm/hardware/debug-8250.S> diff --git a/arch/arm/mach-mmp/jasper.c b/arch/arm/mach-mmp/jasper.c index 66634fd..0e9e5c0 100644 --- a/arch/arm/mach-mmp/jasper.c +++ b/arch/arm/mach-mmp/jasper.c @@ -12,6 +12,7 @@ #include <linux/init.h> #include <linux/kernel.h> +#include <linux/gpio-pxa.h> #include <linux/platform_device.h> #include <linux/io.h> #include <linux/regulator/machine.h> @@ -99,6 +100,10 @@ static unsigned long jasper_pin_config[] __initdata = { GPIO151_MMC3_CLK, }; +static struct pxa_gpio_platform_data mmp2_gpio_pdata = { + .irq_base = MMP_GPIO_TO_IRQ(0), +}; + static struct regulator_consumer_supply max8649_supply[] = { REGULATOR_SUPPLY("vcc_core", NULL), }; @@ -165,6 +170,9 @@ static void __init jasper_init(void) mmp2_add_uart(1); mmp2_add_uart(3); mmp2_add_twsi(1, NULL, ARRAY_AND_SIZE(jasper_twsi1_info)); + platform_device_add_data(&mmp2_device_gpio, &mmp2_gpio_pdata, + sizeof(struct pxa_gpio_platform_data)); + platform_device_register(&mmp2_device_gpio); mmp2_add_sdhost(0, &mmp2_sdh_platdata_mmc0); /* SD/MMC */ regulator_has_full_constraints(); diff --git a/arch/arm/mach-mmp/mmp-dt.c b/arch/arm/mach-mmp/mmp-dt.c index d063efa..b37915d 100644 --- a/arch/arm/mach-mmp/mmp-dt.c +++ b/arch/arm/mach-mmp/mmp-dt.c @@ -28,7 +28,7 @@ static const struct of_dev_auxdata pxa168_auxdata_lookup[] __initconst = { OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4026000, "pxa2xx-uart.2", NULL), OF_DEV_AUXDATA("mrvl,mmp-twsi", 0xd4011000, "pxa2xx-i2c.0", NULL), OF_DEV_AUXDATA("mrvl,mmp-twsi", 0xd4025000, "pxa2xx-i2c.1", NULL), - OF_DEV_AUXDATA("mrvl,mmp-gpio", 0xd4019000, "pxa-gpio", NULL), + OF_DEV_AUXDATA("marvell,mmp-gpio", 0xd4019000, "mmp-gpio", NULL), OF_DEV_AUXDATA("mrvl,mmp-rtc", 0xd4010000, "sa1100-rtc", NULL), {} }; @@ -39,7 +39,7 @@ static const struct of_dev_auxdata pxa910_auxdata_lookup[] __initconst = { OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4036000, "pxa2xx-uart.2", NULL), OF_DEV_AUXDATA("mrvl,mmp-twsi", 0xd4011000, "pxa2xx-i2c.0", NULL), OF_DEV_AUXDATA("mrvl,mmp-twsi", 0xd4037000, "pxa2xx-i2c.1", NULL), - OF_DEV_AUXDATA("mrvl,mmp-gpio", 0xd4019000, "pxa-gpio", NULL), + OF_DEV_AUXDATA("marvell,mmp-gpio", 0xd4019000, "mmp-gpio", NULL), OF_DEV_AUXDATA("mrvl,mmp-rtc", 0xd4010000, "sa1100-rtc", NULL), {} }; diff --git a/arch/arm/mach-mmp/mmp2-dt.c b/arch/arm/mach-mmp/mmp2-dt.c index fad431a..4ac2567 100644 --- a/arch/arm/mach-mmp/mmp2-dt.c +++ b/arch/arm/mach-mmp/mmp2-dt.c @@ -31,7 +31,7 @@ static const struct of_dev_auxdata mmp2_auxdata_lookup[] __initconst = { OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4016000, "pxa2xx-uart.3", NULL), OF_DEV_AUXDATA("mrvl,mmp-twsi", 0xd4011000, "pxa2xx-i2c.0", NULL), OF_DEV_AUXDATA("mrvl,mmp-twsi", 0xd4025000, "pxa2xx-i2c.1", NULL), - OF_DEV_AUXDATA("mrvl,mmp-gpio", 0xd4019000, "pxa-gpio", NULL), + OF_DEV_AUXDATA("marvell,mmp-gpio", 0xd4019000, "mmp2-gpio", NULL), OF_DEV_AUXDATA("mrvl,mmp-rtc", 0xd4010000, "sa1100-rtc", NULL), {} }; diff --git a/arch/arm/mach-mmp/mmp2.c b/arch/arm/mach-mmp/mmp2.c index d94d114..c7592f1 100644 --- a/arch/arm/mach-mmp/mmp2.c +++ b/arch/arm/mach-mmp/mmp2.c @@ -164,7 +164,7 @@ struct resource mmp2_resource_gpio[] = { }; struct platform_device mmp2_device_gpio = { - .name = "pxa-gpio", + .name = "mmp2-gpio", .id = -1, .num_resources = ARRAY_SIZE(mmp2_resource_gpio), .resource = mmp2_resource_gpio, diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c index 9bc7b86..a30dcf3 100644 --- a/arch/arm/mach-mmp/pxa168.c +++ b/arch/arm/mach-mmp/pxa168.c @@ -125,7 +125,7 @@ struct resource pxa168_resource_gpio[] = { }; struct platform_device pxa168_device_gpio = { - .name = "pxa-gpio", + .name = "mmp-gpio", .id = -1, .num_resources = ARRAY_SIZE(pxa168_resource_gpio), .resource = pxa168_resource_gpio, diff --git a/arch/arm/mach-mmp/pxa910.c b/arch/arm/mach-mmp/pxa910.c index 36cb321..ce6393a 100644 --- a/arch/arm/mach-mmp/pxa910.c +++ b/arch/arm/mach-mmp/pxa910.c @@ -152,7 +152,7 @@ struct resource pxa910_resource_gpio[] = { }; struct platform_device pxa910_device_gpio = { - .name = "pxa-gpio", + .name = "mmp-gpio", .id = -1, .num_resources = ARRAY_SIZE(pxa910_resource_gpio), .resource = pxa910_resource_gpio, diff --git a/arch/arm/mach-mmp/tavorevb.c b/arch/arm/mach-mmp/tavorevb.c index 4c127d2..cdfc9bf 100644 --- a/arch/arm/mach-mmp/tavorevb.c +++ b/arch/arm/mach-mmp/tavorevb.c @@ -8,6 +8,7 @@ * publishhed by the Free Software Foundation. */ #include <linux/gpio.h> +#include <linux/gpio-pxa.h> #include <linux/init.h> #include <linux/kernel.h> #include <linux/platform_device.h> @@ -60,6 +61,10 @@ static unsigned long tavorevb_pin_config[] __initdata = { DF_RDY0_DF_RDY0, }; +static struct pxa_gpio_platform_data pxa910_gpio_pdata = { + .irq_base = MMP_GPIO_TO_IRQ(0), +}; + static struct smc91x_platdata tavorevb_smc91x_info = { .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, }; @@ -93,6 +98,8 @@ static void __init tavorevb_init(void) /* on-chip devices */ pxa910_add_uart(1); + platform_device_add_data(&pxa910_device_gpio, &pxa910_gpio_pdata, + sizeof(struct pxa_gpio_platform_data)); platform_device_register(&pxa910_device_gpio); /* off-chip devices */ diff --git a/arch/arm/mach-mmp/teton_bga.c b/arch/arm/mach-mmp/teton_bga.c index 8609967..e4d95b4 100644 --- a/arch/arm/mach-mmp/teton_bga.c +++ b/arch/arm/mach-mmp/teton_bga.c @@ -16,6 +16,7 @@ #include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/gpio.h> +#include <linux/gpio-pxa.h> #include <linux/input.h> #include <linux/platform_data/keypad-pxa27x.h> #include <linux/i2c.h> @@ -49,6 +50,10 @@ static unsigned long teton_bga_pin_config[] __initdata = { GPIO78_GPIO, }; +static struct pxa_gpio_platform_data pxa168_gpio_pdata = { + .irq_base = MMP_GPIO_TO_IRQ(0), +}; + static unsigned int teton_bga_matrix_key_map[] = { KEY(0, 6, KEY_ESC), KEY(0, 7, KEY_ENTER), @@ -79,6 +84,8 @@ static void __init teton_bga_init(void) pxa168_add_uart(1); pxa168_add_keypad(&teton_bga_keypad_info); pxa168_add_twsi(0, NULL, ARRAY_AND_SIZE(teton_bga_i2c_info)); + platform_device_add_data(&pxa168_device_gpio, &pxa168_gpio_pdata, + sizeof(struct pxa_gpio_platform_data)); platform_device_register(&pxa168_device_gpio); } diff --git a/arch/arm/mach-mmp/ttc_dkb.c b/arch/arm/mach-mmp/ttc_dkb.c index 6528a5f..8483906 100644 --- a/arch/arm/mach-mmp/ttc_dkb.c +++ b/arch/arm/mach-mmp/ttc_dkb.c @@ -17,6 +17,7 @@ #include <linux/interrupt.h> #include <linux/i2c/pca953x.h> #include <linux/gpio.h> +#include <linux/gpio-pxa.h> #include <linux/mfd/88pm860x.h> #include <linux/platform_data/mv_usb.h> #include <linux/spi/spi.h> @@ -75,6 +76,10 @@ static unsigned long ttc_dkb_pin_config[] __initdata = { DF_RDY0_DF_RDY0, }; +static struct pxa_gpio_platform_data pxa910_gpio_pdata = { + .irq_base = MMP_GPIO_TO_IRQ(0), +}; + static struct mtd_partition ttc_dkb_onenand_partitions[] = { { .name = "bootloader", @@ -278,6 +283,8 @@ static void __init ttc_dkb_init(void) /* off-chip devices */ pxa910_add_twsi(0, NULL, ARRAY_AND_SIZE(ttc_dkb_i2c_info)); + platform_device_add_data(&pxa910_device_gpio, &pxa910_gpio_pdata, + sizeof(struct pxa_gpio_platform_data)); platform_add_devices(ARRAY_AND_SIZE(ttc_dkb_devices)); #ifdef CONFIG_USB_MV_UDC diff --git a/arch/arm/mach-omap1/include/mach/usb.h b/arch/arm/mach-omap1/include/mach/usb.h index 753cd5c..45e5ac7 100644 --- a/arch/arm/mach-omap1/include/mach/usb.h +++ b/arch/arm/mach-omap1/include/mach/usb.h @@ -2,7 +2,7 @@ * FIXME correct answer depends on hmc_mode, * as does (on omap1) any nonzero value for config->otg port number */ -#ifdef CONFIG_USB_GADGET_OMAP +#if IS_ENABLED(CONFIG_USB_OMAP) #define is_usb0_device(config) 1 #else #define is_usb0_device(config) 0 diff --git a/arch/arm/mach-omap1/usb.c b/arch/arm/mach-omap1/usb.c index 1a1db59..4118db5 100644 --- a/arch/arm/mach-omap1/usb.c +++ b/arch/arm/mach-omap1/usb.c @@ -123,7 +123,7 @@ omap_otg_init(struct omap_usb_config *config) syscon = omap_readl(OTG_SYSCON_1); syscon |= HST_IDLE_EN|DEV_IDLE_EN|OTG_IDLE_EN; -#ifdef CONFIG_USB_GADGET_OMAP +#if IS_ENABLED(CONFIG_USB_OMAP) if (config->otg || config->register_dev) { struct platform_device *udc_device = config->udc_device; int status; @@ -169,7 +169,7 @@ omap_otg_init(struct omap_usb_config *config) void omap_otg_init(struct omap_usb_config *config) {} #endif -#ifdef CONFIG_USB_GADGET_OMAP +#if IS_ENABLED(CONFIG_USB_OMAP) static struct resource udc_resources[] = { /* order is significant! */ @@ -600,7 +600,7 @@ static void __init omap_1510_usb_init(struct omap_usb_config *config) while (!(omap_readw(ULPD_DPLL_CTRL) & DPLL_LOCK)) cpu_relax(); -#ifdef CONFIG_USB_GADGET_OMAP +#if IS_ENABLED(CONFIG_USB_OMAP) if (config->register_dev) { int status; diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index b068b7f..62bb352 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -229,7 +229,6 @@ obj-$(CONFIG_MACH_DEVKIT8000) += board-devkit8000.o obj-$(CONFIG_MACH_OMAP_LDP) += board-ldp.o obj-$(CONFIG_MACH_OMAP3530_LV_SOM) += board-omap3logic.o obj-$(CONFIG_MACH_OMAP3_TORPEDO) += board-omap3logic.o -obj-$(CONFIG_MACH_ENCORE) += board-omap3encore.o obj-$(CONFIG_MACH_OVERO) += board-overo.o obj-$(CONFIG_MACH_OMAP3EVM) += board-omap3evm.o obj-$(CONFIG_MACH_OMAP3_PANDORA) += board-omap3pandora.o @@ -255,8 +254,6 @@ obj-$(CONFIG_MACH_TOUCHBOOK) += board-omap3touchbook.o obj-$(CONFIG_MACH_OMAP_4430SDP) += board-4430sdp.o obj-$(CONFIG_MACH_OMAP4_PANDA) += board-omap4panda.o -obj-$(CONFIG_MACH_PCM049) += board-omap4pcm049.o - obj-$(CONFIG_MACH_OMAP3517EVM) += board-am3517evm.o obj-$(CONFIG_MACH_CRANEBOARD) += board-am3517crane.o diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 35f3ad0..00d7290 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -291,6 +291,10 @@ static struct platform_device sdp4430_leds_pwm = { }, }; +/* Dummy regulator for pwm-backlight driver */ +static struct regulator_consumer_supply backlight_supply = + REGULATOR_SUPPLY("enable", "pwm-backlight"); + static struct platform_pwm_backlight_data sdp4430_backlight_data = { .max_brightness = 127, .dft_brightness = 127, @@ -718,6 +722,8 @@ static void __init omap_4430sdp_init(void) omap4_i2c_init(); omap_sfh7741prox_init(); + regulator_register_always_on(0, "backlight-enable", + &backlight_supply, 1, 0); platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices)); omap_serial_init(); omap_sdrc_init(NULL, NULL); diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index 3a077df..1a88467 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -547,12 +547,16 @@ static struct regulator_consumer_supply rx51_vio_supplies[] = { REGULATOR_SUPPLY("DVDD", "2-0019"), /* Si4713 IO supply */ REGULATOR_SUPPLY("vio", "2-0063"), + /* lis3lv02d */ + REGULATOR_SUPPLY("Vdd_IO", "3-001d"), }; static struct regulator_consumer_supply rx51_vaux1_consumers[] = { REGULATOR_SUPPLY("vdds_sdi", "omapdss"), /* Si4713 supply */ REGULATOR_SUPPLY("vdd", "2-0063"), + /* lis3lv02d */ + REGULATOR_SUPPLY("Vdd", "3-001d"), }; static struct regulator_init_data rx51_vaux1 = { diff --git a/arch/arm/mach-omap2/board-zoom-display.c b/arch/arm/mach-omap2/board-zoom-display.c index 8cef477..9a7174f 100644 --- a/arch/arm/mach-omap2/board-zoom-display.c +++ b/arch/arm/mach-omap2/board-zoom-display.c @@ -12,7 +12,6 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/gpio.h> -#include <linux/i2c/twl.h> #include <linux/spi/spi.h> #include <linux/platform_data/spi-omap2-mcspi.h> #include <video/omapdss.h> @@ -49,59 +48,6 @@ static void zoom_panel_disable_lcd(struct omap_dss_device *dssdev) { } -/* Register offsets in TWL4030_MODULE_INTBR */ -#define TWL_INTBR_PMBR1 0xD -#define TWL_INTBR_GPBR1 0xC - -/* Register offsets in TWL_MODULE_PWM */ -#define TWL_LED_PWMON 0x3 -#define TWL_LED_PWMOFF 0x4 - -static int zoom_set_bl_intensity(struct omap_dss_device *dssdev, int level) -{ -#ifdef CONFIG_TWL4030_CORE - unsigned char c; - u8 mux_pwm, enb_pwm; - - if (level > 100) - return -1; - - twl_i2c_read_u8(TWL4030_MODULE_INTBR, &mux_pwm, TWL_INTBR_PMBR1); - twl_i2c_read_u8(TWL4030_MODULE_INTBR, &enb_pwm, TWL_INTBR_GPBR1); - - if (level == 0) { - /* disable pwm1 output and clock */ - enb_pwm = enb_pwm & 0xF5; - /* change pwm1 pin to gpio pin */ - mux_pwm = mux_pwm & 0xCF; - twl_i2c_write_u8(TWL4030_MODULE_INTBR, - enb_pwm, TWL_INTBR_GPBR1); - twl_i2c_write_u8(TWL4030_MODULE_INTBR, - mux_pwm, TWL_INTBR_PMBR1); - return 0; - } - - if (!((enb_pwm & 0xA) && (mux_pwm & 0x30))) { - /* change gpio pin to pwm1 pin */ - mux_pwm = mux_pwm | 0x30; - /* enable pwm1 output and clock*/ - enb_pwm = enb_pwm | 0x0A; - twl_i2c_write_u8(TWL4030_MODULE_INTBR, - mux_pwm, TWL_INTBR_PMBR1); - twl_i2c_write_u8(TWL4030_MODULE_INTBR, - enb_pwm, TWL_INTBR_GPBR1); - } - - c = ((50 * (100 - level)) / 100) + 1; - twl_i2c_write_u8(TWL_MODULE_PWM, 0x7F, TWL_LED_PWMOFF); - twl_i2c_write_u8(TWL_MODULE_PWM, c, TWL_LED_PWMON); -#else - pr_warn("Backlight not enabled\n"); -#endif - - return 0; -} - static struct omap_dss_device zoom_lcd_device = { .name = "lcd", .driver_name = "NEC_8048_panel", @@ -109,8 +55,6 @@ static struct omap_dss_device zoom_lcd_device = { .phy.dpi.data_lines = 24, .platform_enable = zoom_panel_enable_lcd, .platform_disable = zoom_panel_disable_lcd, - .max_backlight_level = 100, - .set_backlight = zoom_set_bl_intensity, }; static struct omap_dss_device *zoom_dss_devices[] = { diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c index cdc0c10..a90375d 100644 --- a/arch/arm/mach-omap2/board-zoom-peripherals.c +++ b/arch/arm/mach-omap2/board-zoom-peripherals.c @@ -22,6 +22,9 @@ #include <linux/platform_data/gpio-omap.h> #include <linux/platform_data/omap-twl4030.h> #include <linux/usb/phy.h> +#include <linux/pwm.h> +#include <linux/leds_pwm.h> +#include <linux/pwm_backlight.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -193,6 +196,53 @@ static struct platform_device omap_vwlan_device = { }, }; +static struct pwm_lookup zoom_pwm_lookup[] = { + PWM_LOOKUP("twl-pwm", 0, "leds_pwm", "zoom::keypad"), + PWM_LOOKUP("twl-pwm", 1, "pwm-backlight", "backlight"), +}; + +static struct led_pwm zoom_pwm_leds[] = { + { + .name = "zoom::keypad", + .max_brightness = 127, + .pwm_period_ns = 7812500, + }, +}; + +static struct led_pwm_platform_data zoom_pwm_data = { + .num_leds = ARRAY_SIZE(zoom_pwm_leds), + .leds = zoom_pwm_leds, +}; + +static struct platform_device zoom_leds_pwm = { + .name = "leds_pwm", + .id = -1, + .dev = { + .platform_data = &zoom_pwm_data, + }, +}; + +static struct platform_pwm_backlight_data zoom_backlight_data = { + .pwm_id = 1, + .max_brightness = 127, + .dft_brightness = 127, + .pwm_period_ns = 7812500, +}; + +static struct platform_device zoom_backlight_pwm = { + .name = "pwm-backlight", + .id = -1, + .dev = { + .platform_data = &zoom_backlight_data, + }, +}; + +static struct platform_device *zoom_devices[] __initdata = { + &omap_vwlan_device, + &zoom_leds_pwm, + &zoom_backlight_pwm, +}; + static struct wl12xx_platform_data omap_zoom_wlan_data __initdata = { .board_ref_clock = WL12XX_REFCLOCK_26, /* 26 MHz */ }; @@ -301,7 +351,8 @@ void __init zoom_peripherals_init(void) omap_hsmmc_init(mmc); omap_i2c_init(); - platform_device_register(&omap_vwlan_device); + pwm_add_table(zoom_pwm_lookup, ARRAY_SIZE(zoom_pwm_lookup)); + platform_add_devices(zoom_devices, ARRAY_SIZE(zoom_devices)); usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); usb_musb_init(NULL); enable_board_wakeup_source(); diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index 86eec41..9075461 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -51,11 +51,13 @@ config MACH_LITTLETON config MACH_TAVOREVB bool "PXA930 Evaluation Board (aka TavorEVB)" select CPU_PXA930 + select CPU_PXA935 select PXA3xx config MACH_SAAR bool "PXA930 Handheld Platform (aka SAAR)" select CPU_PXA930 + select CPU_PXA935 select PXA3xx comment "Third Party Dev Platforms (sorted by vendor name)" diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c index daa86d3..6660943 100644 --- a/arch/arm/mach-pxa/devices.c +++ b/arch/arm/mach-pxa/devices.c @@ -1107,8 +1107,33 @@ struct resource pxa_resource_gpio[] = { }, }; -struct platform_device pxa_device_gpio = { - .name = "pxa-gpio", +struct platform_device pxa25x_device_gpio = { +#ifdef CONFIG_CPU_PXA26x + .name = "pxa26x-gpio", +#else + .name = "pxa25x-gpio", +#endif + .id = -1, + .num_resources = ARRAY_SIZE(pxa_resource_gpio), + .resource = pxa_resource_gpio, +}; + +struct platform_device pxa27x_device_gpio = { + .name = "pxa27x-gpio", + .id = -1, + .num_resources = ARRAY_SIZE(pxa_resource_gpio), + .resource = pxa_resource_gpio, +}; + +struct platform_device pxa3xx_device_gpio = { + .name = "pxa3xx-gpio", + .id = -1, + .num_resources = ARRAY_SIZE(pxa_resource_gpio), + .resource = pxa_resource_gpio, +}; + +struct platform_device pxa93x_device_gpio = { + .name = "pxa93x-gpio", .id = -1, .num_resources = ARRAY_SIZE(pxa_resource_gpio), .resource = pxa_resource_gpio, diff --git a/arch/arm/mach-pxa/devices.h b/arch/arm/mach-pxa/devices.h index 1475db1..0f3fd0d 100644 --- a/arch/arm/mach-pxa/devices.h +++ b/arch/arm/mach-pxa/devices.h @@ -16,7 +16,6 @@ extern struct platform_device pxa_device_ficp; extern struct platform_device sa1100_device_rtc; extern struct platform_device pxa_device_rtc; extern struct platform_device pxa_device_ac97; -extern struct platform_device pxa_device_gpio; extern struct platform_device pxa27x_device_i2c_power; extern struct platform_device pxa27x_device_ohci; @@ -46,4 +45,9 @@ extern struct platform_device pxa_device_asoc_ssp2; extern struct platform_device pxa_device_asoc_ssp3; extern struct platform_device pxa_device_asoc_ssp4; +extern struct platform_device pxa25x_device_gpio; +extern struct platform_device pxa27x_device_gpio; +extern struct platform_device pxa3xx_device_gpio; +extern struct platform_device pxa93x_device_gpio; + void __init pxa_register_device(struct platform_device *dev, void *data); diff --git a/arch/arm/mach-pxa/include/mach/debug-macro.S b/arch/arm/mach-pxa/include/mach/debug-macro.S deleted file mode 100644 index 70b112e..0000000 --- a/arch/arm/mach-pxa/include/mach/debug-macro.S +++ /dev/null @@ -1,23 +0,0 @@ -/* arch/arm/mach-pxa/include/mach/debug-macro.S - * - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ - -#include "hardware.h" - - .macro addruart, rp, rv, tmp - mov \rp, #0x00100000 - orr \rv, \rp, #io_p2v(0x40000000) @ virtual - orr \rp, \rp, #0x40000000 @ physical - .endm - -#define UART_SHIFT 2 -#include <asm/hardware/debug-8250.S> diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c index 3f5171e..f2c2897 100644 --- a/arch/arm/mach-pxa/pxa25x.c +++ b/arch/arm/mach-pxa/pxa25x.c @@ -208,7 +208,11 @@ static struct clk_lookup pxa25x_clkregs[] = { INIT_CLKREG(&clk_pxa25x_gpio11, NULL, "GPIO11_CLK"), INIT_CLKREG(&clk_pxa25x_gpio12, NULL, "GPIO12_CLK"), INIT_CLKREG(&clk_pxa25x_mem, "pxa2xx-pcmcia", NULL), - INIT_CLKREG(&clk_dummy, "pxa-gpio", NULL), +#ifdef CONFIG_CPU_PXA26x + INIT_CLKREG(&clk_dummy, "pxa26x-gpio", NULL), +#else + INIT_CLKREG(&clk_dummy, "pxa25x-gpio", NULL), +#endif INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL), }; @@ -340,7 +344,8 @@ void __init pxa25x_map_io(void) } static struct pxa_gpio_platform_data pxa25x_gpio_info __initdata = { - .gpio_set_wake = gpio_set_wake, + .irq_base = PXA_GPIO_TO_IRQ(0), + .gpio_set_wake = gpio_set_wake, }; static struct platform_device *pxa25x_devices[] __initdata = { @@ -375,7 +380,7 @@ static int __init pxa25x_init(void) register_syscore_ops(&pxa2xx_mfp_syscore_ops); register_syscore_ops(&pxa2xx_clock_syscore_ops); - pxa_register_device(&pxa_device_gpio, &pxa25x_gpio_info); + pxa_register_device(&pxa25x_device_gpio, &pxa25x_gpio_info); ret = platform_add_devices(pxa25x_devices, ARRAY_SIZE(pxa25x_devices)); if (ret) diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index 3203a9f..301471a 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -237,7 +237,7 @@ static struct clk_lookup pxa27x_clkregs[] = { INIT_CLKREG(&clk_pxa27x_im, NULL, "IMCLK"), INIT_CLKREG(&clk_pxa27x_memc, NULL, "MEMCLK"), INIT_CLKREG(&clk_pxa27x_mem, "pxa2xx-pcmcia", NULL), - INIT_CLKREG(&clk_dummy, "pxa-gpio", NULL), + INIT_CLKREG(&clk_dummy, "pxa27x-gpio", NULL), INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL), }; @@ -431,7 +431,8 @@ void __init pxa27x_set_i2c_power_info(struct i2c_pxa_platform_data *info) } static struct pxa_gpio_platform_data pxa27x_gpio_info __initdata = { - .gpio_set_wake = gpio_set_wake, + .irq_base = PXA_GPIO_TO_IRQ(0), + .gpio_set_wake = gpio_set_wake, }; static struct platform_device *devices[] __initdata = { @@ -470,7 +471,7 @@ static int __init pxa27x_init(void) register_syscore_ops(&pxa2xx_mfp_syscore_ops); register_syscore_ops(&pxa2xx_clock_syscore_ops); - pxa_register_device(&pxa_device_gpio, &pxa27x_gpio_info); + pxa_register_device(&pxa27x_device_gpio, &pxa27x_gpio_info); ret = platform_add_devices(devices, ARRAY_SIZE(devices)); } diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c index 656a1bb..87011f3 100644 --- a/arch/arm/mach-pxa/pxa3xx.c +++ b/arch/arm/mach-pxa/pxa3xx.c @@ -15,6 +15,7 @@ #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> +#include <linux/gpio-pxa.h> #include <linux/pm.h> #include <linux/platform_device.h> #include <linux/irq.h> @@ -92,7 +93,8 @@ static struct clk_lookup pxa3xx_clkregs[] = { INIT_CLKREG(&clk_pxa3xx_mmc1, "pxa2xx-mci.0", NULL), INIT_CLKREG(&clk_pxa3xx_mmc2, "pxa2xx-mci.1", NULL), INIT_CLKREG(&clk_pxa3xx_smemc, "pxa2xx-pcmcia", NULL), - INIT_CLKREG(&clk_pxa3xx_gpio, "pxa-gpio", NULL), + INIT_CLKREG(&clk_pxa3xx_gpio, "pxa3xx-gpio", NULL), + INIT_CLKREG(&clk_pxa3xx_gpio, "pxa93x-gpio", NULL), INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL), }; @@ -435,8 +437,11 @@ void __init pxa3xx_set_i2c_power_info(struct i2c_pxa_platform_data *info) pxa_register_device(&pxa3xx_device_i2c_power, info); } +static struct pxa_gpio_platform_data pxa3xx_gpio_pdata = { + .irq_base = PXA_GPIO_TO_IRQ(0), +}; + static struct platform_device *devices[] __initdata = { - &pxa_device_gpio, &pxa27x_device_udc, &pxa_device_pmu, &pxa_device_i2s, @@ -482,8 +487,18 @@ static int __init pxa3xx_init(void) register_syscore_ops(&pxa3xx_mfp_syscore_ops); register_syscore_ops(&pxa3xx_clock_syscore_ops); - if (!of_have_populated_dt()) - ret = platform_add_devices(devices, ARRAY_SIZE(devices)); + if (of_have_populated_dt()) + return 0; + + ret = platform_add_devices(devices, ARRAY_SIZE(devices)); + if (ret) + return ret; + if (cpu_is_pxa300() || cpu_is_pxa310() || cpu_is_pxa320()) { + platform_device_add_data(&pxa3xx_device_gpio, + &pxa3xx_gpio_pdata, + sizeof(pxa3xx_gpio_pdata)); + ret = platform_device_register(&pxa3xx_device_gpio); + } } return ret; diff --git a/arch/arm/mach-pxa/pxa930.c b/arch/arm/mach-pxa/pxa930.c index 8aeacf9..ab62448 100644 --- a/arch/arm/mach-pxa/pxa930.c +++ b/arch/arm/mach-pxa/pxa930.c @@ -12,12 +12,15 @@ #include <linux/module.h> #include <linux/kernel.h> -#include <linux/platform_device.h> -#include <linux/irq.h> #include <linux/dma-mapping.h> +#include <linux/irq.h> +#include <linux/gpio-pxa.h> +#include <linux/platform_device.h> #include <mach/pxa930.h> +#include "devices.h" + static struct mfp_addr_map pxa930_mfp_addr_map[] __initdata = { MFP_ADDR(GPIO0, 0x02e0), @@ -190,11 +193,21 @@ static struct mfp_addr_map pxa935_mfp_addr_map[] __initdata = { MFP_ADDR_END, }; +static struct pxa_gpio_platform_data pxa93x_gpio_pdata = { + .irq_base = PXA_GPIO_TO_IRQ(0), +}; + static int __init pxa930_init(void) { + int ret = 0; + if (cpu_is_pxa93x()) { mfp_init_base(io_p2v(MFPR_BASE)); mfp_init_addr(pxa930_mfp_addr_map); + platform_device_add_data(&pxa93x_device_gpio, + &pxa93x_gpio_pdata, + sizeof(pxa93x_gpio_pdata)); + ret = platform_device_register(&pxa93x_device_gpio); } if (cpu_is_pxa935()) diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index 75d413c..eb3a7ff 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -104,6 +104,19 @@ config MACH_MARZEN select ARCH_REQUIRE_GPIOLIB select REGULATOR_FIXED_VOLTAGE if REGULATOR +config MACH_MARZEN_REFERENCE + bool "MARZEN board - Reference Device Tree Implementation" + depends on ARCH_R8A7779 + select ARCH_REQUIRE_GPIOLIB + select REGULATOR_FIXED_VOLTAGE if REGULATOR + select USE_OF + ---help--- + Use reference implementation of Marzen board support + which makes use of device tree at the expense + of not supporting a number of devices. + + This is intended to aid developers + config MACH_KZM9D bool "KZM9D board" depends on ARCH_EMEV2 @@ -118,6 +131,20 @@ config MACH_KZM9G select SND_SOC_AK4642 if SND_SIMPLE_CARD select USE_OF +config MACH_KZM9G_REFERENCE + bool "KZM-A9-GT board - Reference Device Tree Implementation" + depends on ARCH_SH73A0 + select ARCH_REQUIRE_GPIOLIB + select REGULATOR_FIXED_VOLTAGE if REGULATOR + select SND_SOC_AK4642 if SND_SIMPLE_CARD + select USE_OF + ---help--- + Use reference implementation of KZM-A9-GT board support + which makes as greater use of device tree at the expense + of not supporting a number of devices. + + This is intended to aid developers + comment "SH-Mobile System Configuration" config CPU_HAS_INTEVT diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile index b646ff4..c621edf 100644 --- a/arch/arm/mach-shmobile/Makefile +++ b/arch/arm/mach-shmobile/Makefile @@ -38,9 +38,11 @@ obj-$(CONFIG_MACH_MACKEREL) += board-mackerel.o obj-$(CONFIG_MACH_KOTA2) += board-kota2.o obj-$(CONFIG_MACH_BONITO) += board-bonito.o obj-$(CONFIG_MACH_MARZEN) += board-marzen.o +obj-$(CONFIG_MACH_MARZEN_REFERENCE) += board-marzen-reference.o obj-$(CONFIG_MACH_ARMADILLO800EVA) += board-armadillo800eva.o obj-$(CONFIG_MACH_KZM9D) += board-kzm9d.o obj-$(CONFIG_MACH_KZM9G) += board-kzm9g.o +obj-$(CONFIG_MACH_KZM9G_REFERENCE) += board-kzm9g-reference.o # Framework support obj-$(CONFIG_SMP) += $(smp-y) diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c index 80d5c2f..4dfe322 100644 --- a/arch/arm/mach-shmobile/board-armadillo800eva.c +++ b/arch/arm/mach-shmobile/board-armadillo800eva.c @@ -29,8 +29,10 @@ #include <linux/platform_device.h> #include <linux/gpio.h> #include <linux/gpio_keys.h> +#include <linux/regulator/driver.h> #include <linux/pinctrl/machine.h> #include <linux/regulator/fixed.h> +#include <linux/regulator/gpio-regulator.h> #include <linux/regulator/machine.h> #include <linux/sh_eth.h> #include <linux/videodev2.h> @@ -560,15 +562,119 @@ static struct platform_device gpio_keys_device = { }, }; -/* Fixed 3.3V regulator to be used by SDHI0, SDHI1, MMCIF */ -static struct regulator_consumer_supply fixed3v3_power_consumers[] = -{ +/* Fixed 3.3V regulator to be used by SDHI1, MMCIF */ +static struct regulator_consumer_supply fixed3v3_power_consumers[] = { + REGULATOR_SUPPLY("vmmc", "sh_mmcif"), + REGULATOR_SUPPLY("vqmmc", "sh_mmcif"), +}; + +/* Fixed 3.3V regulator to be used by SDHI0 */ +static struct regulator_consumer_supply vcc_sdhi0_consumers[] = { REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"), +}; + +static struct regulator_init_data vcc_sdhi0_init_data = { + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(vcc_sdhi0_consumers), + .consumer_supplies = vcc_sdhi0_consumers, +}; + +static struct fixed_voltage_config vcc_sdhi0_info = { + .supply_name = "SDHI0 Vcc", + .microvolts = 3300000, + .gpio = GPIO_PORT75, + .enable_high = 1, + .init_data = &vcc_sdhi0_init_data, +}; + +static struct platform_device vcc_sdhi0 = { + .name = "reg-fixed-voltage", + .id = 1, + .dev = { + .platform_data = &vcc_sdhi0_info, + }, +}; + +/* 1.8 / 3.3V SDHI0 VccQ regulator */ +static struct regulator_consumer_supply vccq_sdhi0_consumers[] = { REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"), +}; + +static struct regulator_init_data vccq_sdhi0_init_data = { + .constraints = { + .input_uV = 3300000, + .min_uV = 1800000, + .max_uV = 3300000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(vccq_sdhi0_consumers), + .consumer_supplies = vccq_sdhi0_consumers, +}; + +static struct gpio vccq_sdhi0_gpios[] = { + {GPIO_PORT17, GPIOF_OUT_INIT_LOW, "vccq-sdhi0" }, +}; + +static struct gpio_regulator_state vccq_sdhi0_states[] = { + { .value = 3300000, .gpios = (0 << 0) }, + { .value = 1800000, .gpios = (1 << 0) }, +}; + +static struct gpio_regulator_config vccq_sdhi0_info = { + .supply_name = "vqmmc", + + .enable_gpio = GPIO_PORT74, + .enable_high = 1, + .enabled_at_boot = 0, + + .gpios = vccq_sdhi0_gpios, + .nr_gpios = ARRAY_SIZE(vccq_sdhi0_gpios), + + .states = vccq_sdhi0_states, + .nr_states = ARRAY_SIZE(vccq_sdhi0_states), + + .type = REGULATOR_VOLTAGE, + .init_data = &vccq_sdhi0_init_data, +}; + +static struct platform_device vccq_sdhi0 = { + .name = "gpio-regulator", + .id = -1, + .dev = { + .platform_data = &vccq_sdhi0_info, + }, +}; + +/* Fixed 3.3V regulator to be used by SDHI1 */ +static struct regulator_consumer_supply vcc_sdhi1_consumers[] = { REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"), - REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"), - REGULATOR_SUPPLY("vmmc", "sh_mmcif"), - REGULATOR_SUPPLY("vqmmc", "sh_mmcif"), +}; + +static struct regulator_init_data vcc_sdhi1_init_data = { + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(vcc_sdhi1_consumers), + .consumer_supplies = vcc_sdhi1_consumers, +}; + +static struct fixed_voltage_config vcc_sdhi1_info = { + .supply_name = "SDHI1 Vcc", + .microvolts = 3300000, + .gpio = GPIO_PORT16, + .enable_high = 1, + .init_data = &vcc_sdhi1_init_data, +}; + +static struct platform_device vcc_sdhi1 = { + .name = "reg-fixed-voltage", + .id = 2, + .dev = { + .platform_data = &vcc_sdhi1_info, + }, }; /* SDHI0 */ @@ -584,10 +690,10 @@ static struct regulator_consumer_supply fixed3v3_power_consumers[] = static struct sh_mobile_sdhi_info sdhi0_info = { .dma_slave_tx = SHDMA_SLAVE_SDHI0_TX, .dma_slave_rx = SHDMA_SLAVE_SDHI0_RX, - .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |\ - MMC_CAP_NEEDS_POLL, - .tmio_ocr_mask = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34, - .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT, + .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ | + MMC_CAP_POWER_OFF_CARD, + .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_USE_GPIO_CD, + .cd_gpio = GPIO_PORT167, }; static struct resource sdhi0_resources[] = { @@ -626,9 +732,11 @@ static struct platform_device sdhi0_device = { static struct sh_mobile_sdhi_info sdhi1_info = { .dma_slave_tx = SHDMA_SLAVE_SDHI1_TX, .dma_slave_rx = SHDMA_SLAVE_SDHI1_RX, - .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ, - .tmio_ocr_mask = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34, - .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT, + .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ | + MMC_CAP_POWER_OFF_CARD, + .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_USE_GPIO_CD, + /* Port72 cannot generate IRQs, will be used in polling mode. */ + .cd_gpio = GPIO_PORT72, }; static struct resource sdhi1_resources[] = { @@ -676,7 +784,6 @@ static const struct pinctrl_map eva_sdhi1_pinctrl_map[] = { /* MMCIF */ static struct sh_mmcif_plat_data sh_mmcif_plat = { .sup_pclk = 0, - .ocr = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34, .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE, @@ -924,6 +1031,8 @@ static struct platform_device *eva_devices[] __initdata = { &lcdc0_device, &gpio_keys_device, &sh_eth_device, + &vcc_sdhi0, + &vccq_sdhi0, &sdhi0_device, &sh_mmcif_device, &hdmi_device, @@ -1067,13 +1176,6 @@ static void __init eva_init(void) usb = &usbhsf_device; } - /* SDHI0 */ - gpio_request_one(17, GPIOF_OUT_INIT_LOW, NULL); /* SDHI0_18/33_B */ - gpio_request_one(74, GPIOF_OUT_INIT_HIGH, NULL); /* SDHI0_PON */ - gpio_request_one(75, GPIOF_OUT_INIT_HIGH, NULL); /* SDSLOT1_PON */ - - /* we can use GPIO_FN_IRQ31_PORT167 here for SDHI0 CD irq */ - /* CEU0 */ gpio_request(GPIO_FN_VIO0_D7, NULL); gpio_request(GPIO_FN_VIO0_D6, NULL); @@ -1134,9 +1236,7 @@ static void __init eva_init(void) pinctrl_register_mappings(eva_sdhi1_pinctrl_map, ARRAY_SIZE(eva_sdhi1_pinctrl_map)); - /* SDSLOT2_PON */ - gpio_request_one(16, GPIOF_OUT_INIT_HIGH, NULL); - + platform_device_register(&vcc_sdhi1); platform_device_register(&sdhi1_device); } diff --git a/arch/arm/mach-shmobile/board-kzm9g-reference.c b/arch/arm/mach-shmobile/board-kzm9g-reference.c new file mode 100644 index 0000000..aefa50d --- /dev/null +++ b/arch/arm/mach-shmobile/board-kzm9g-reference.c @@ -0,0 +1,107 @@ +/* + * KZM-A9-GT board support - Reference Device Tree Implementation + * + * Copyright (C) 2012 Horms Solutions Ltd. + * + * Based on board-kzm9g.c + * Copyright (C) 2012 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <linux/delay.h> +#include <linux/gpio.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/irqchip.h> +#include <linux/input.h> +#include <linux/of_platform.h> +#include <linux/pinctrl/machine.h> +#include <linux/pinctrl/pinconf-generic.h> +#include <mach/sh73a0.h> +#include <mach/common.h> +#include <asm/hardware/cache-l2x0.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> + +static unsigned long pin_pullup_conf[] = { + PIN_CONF_PACKED(PIN_CONFIG_BIAS_PULL_UP, 0), +}; + +static const struct pinctrl_map kzm_pinctrl_map[] = { + PIN_MAP_MUX_GROUP_DEFAULT("e6826000.i2c", "pfc-sh73a0", + "i2c3_1", "i2c3"), + /* MMCIF */ + PIN_MAP_MUX_GROUP_DEFAULT("e6bd0000.mmcif", "pfc-sh73a0", + "mmc0_data8_0", "mmc0"), + PIN_MAP_MUX_GROUP_DEFAULT("e6bd0000.mmcif", "pfc-sh73a0", + "mmc0_ctrl_0", "mmc0"), + PIN_MAP_CONFIGS_PIN_DEFAULT("e6bd0000.mmcif", "pfc-sh73a0", + "PORT279", pin_pullup_conf), + PIN_MAP_CONFIGS_GROUP_DEFAULT("e6bd0000.mmcif", "pfc-sh73a0", + "mmc0_data8_0", pin_pullup_conf), + /* SCIFA4 */ + PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.4", "pfc-sh73a0", + "scifa4_data", "scifa4"), + PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.4", "pfc-sh73a0", + "scifa4_ctrl", "scifa4"), + /* SDHI0 */ + PIN_MAP_MUX_GROUP_DEFAULT("ee100000.sdhi", "pfc-sh73a0", + "sdhi0_data4", "sdhi0"), + PIN_MAP_MUX_GROUP_DEFAULT("ee100000.sdhi", "pfc-sh73a0", + "sdhi0_ctrl", "sdhi0"), + PIN_MAP_MUX_GROUP_DEFAULT("ee100000.sdhi", "pfc-sh73a0", + "sdhi0_cd", "sdhi0"), + PIN_MAP_MUX_GROUP_DEFAULT("ee100000.sdhi", "pfc-sh73a0", + "sdhi0_wp", "sdhi0"), + /* SDHI2 */ + PIN_MAP_MUX_GROUP_DEFAULT("ee140000.sdhi", "pfc-sh73a0", + "sdhi2_data4", "sdhi2"), + PIN_MAP_MUX_GROUP_DEFAULT("ee140000.sdhi", "pfc-sh73a0", + "sdhi2_ctrl", "sdhi2"), +}; + +static void __init kzm_init(void) +{ + sh73a0_add_standard_devices_dt(); + pinctrl_register_mappings(kzm_pinctrl_map, ARRAY_SIZE(kzm_pinctrl_map)); + sh73a0_pinmux_init(); + + /* enable SD */ + gpio_request(GPIO_FN_SDHI0_VCCQ_MC0_ON, NULL); + gpio_request_one(15, GPIOF_OUT_INIT_HIGH, NULL); /* power */ + + gpio_request_one(14, GPIOF_OUT_INIT_HIGH, NULL); /* power */ + +#ifdef CONFIG_CACHE_L2X0 + /* Early BRESP enable, Shared attribute override enable, 64K*8way */ + l2x0_init(IOMEM(0xf0100000), 0x40460000, 0x82000fff); +#endif +} + +static const char *kzm9g_boards_compat_dt[] __initdata = { + "renesas,kzm9g-reference", + NULL, +}; + +DT_MACHINE_START(KZM9G_DT, "kzm9g-reference") + .smp = smp_ops(sh73a0_smp_ops), + .map_io = sh73a0_map_io, + .init_early = sh73a0_init_delay, + .nr_irqs = NR_IRQS_LEGACY, + .init_irq = irqchip_init, + .init_machine = kzm_init, + .init_time = shmobile_timer_init, + .dt_compat = kzm9g_boards_compat_dt, +MACHINE_END diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c index 42e5164..e6b775a 100644 --- a/arch/arm/mach-shmobile/board-kzm9g.c +++ b/arch/arm/mach-shmobile/board-kzm9g.c @@ -63,8 +63,8 @@ /* Dummy supplies, where voltage doesn't matter */ static struct regulator_consumer_supply dummy_supplies[] = { - REGULATOR_SUPPLY("vddvario", "smsc911x"), - REGULATOR_SUPPLY("vdd33a", "smsc911x"), + REGULATOR_SUPPLY("vddvario", "smsc911x.0"), + REGULATOR_SUPPLY("vdd33a", "smsc911x.0"), }; /* @@ -379,13 +379,64 @@ static struct platform_device mmc_device = { .resource = sh_mmcif_resources, }; -/* Fixed 2.8V regulators to be used by SDHI0 and SDHI2 */ -static struct regulator_consumer_supply fixed2v8_power_consumers[] = +/* Fixed 3.3V regulators to be used by SDHI0 */ +static struct regulator_consumer_supply vcc_sdhi0_consumers[] = { REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"), - REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"), +}; + +static struct regulator_init_data vcc_sdhi0_init_data = { + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(vcc_sdhi0_consumers), + .consumer_supplies = vcc_sdhi0_consumers, +}; + +static struct fixed_voltage_config vcc_sdhi0_info = { + .supply_name = "SDHI0 Vcc", + .microvolts = 3300000, + .gpio = 15, + .enable_high = 1, + .init_data = &vcc_sdhi0_init_data, +}; + +static struct platform_device vcc_sdhi0 = { + .name = "reg-fixed-voltage", + .id = 0, + .dev = { + .platform_data = &vcc_sdhi0_info, + }, +}; + +/* Fixed 3.3V regulators to be used by SDHI2 */ +static struct regulator_consumer_supply vcc_sdhi2_consumers[] = +{ REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.2"), - REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.2"), +}; + +static struct regulator_init_data vcc_sdhi2_init_data = { + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(vcc_sdhi2_consumers), + .consumer_supplies = vcc_sdhi2_consumers, +}; + +static struct fixed_voltage_config vcc_sdhi2_info = { + .supply_name = "SDHI2 Vcc", + .microvolts = 3300000, + .gpio = 14, + .enable_high = 1, + .init_data = &vcc_sdhi2_init_data, +}; + +static struct platform_device vcc_sdhi2 = { + .name = "reg-fixed-voltage", + .id = 1, + .dev = { + .platform_data = &vcc_sdhi2_info, + }, }; /* SDHI */ @@ -393,8 +444,8 @@ static struct sh_mobile_sdhi_info sdhi0_info = { .dma_slave_tx = SHDMA_SLAVE_SDHI0_TX, .dma_slave_rx = SHDMA_SLAVE_SDHI0_RX, .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT, - .tmio_caps = MMC_CAP_SD_HIGHSPEED, - .tmio_ocr_mask = MMC_VDD_27_28 | MMC_VDD_28_29, + .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ | + MMC_CAP_POWER_OFF_CARD, }; static struct resource sdhi0_resources[] = { @@ -437,8 +488,7 @@ static struct sh_mobile_sdhi_info sdhi2_info = { .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_USE_GPIO_CD | TMIO_MMC_WRPROTECT_DISABLE, - .tmio_caps = MMC_CAP_SD_HIGHSPEED, - .tmio_ocr_mask = MMC_VDD_27_28 | MMC_VDD_28_29, + .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_POWER_OFF_CARD, .cd_gpio = 13, }; @@ -598,6 +648,8 @@ static struct platform_device *kzm_devices[] __initdata = { &usbhs_device, &lcdc_device, &mmc_device, + &vcc_sdhi0, + &vcc_sdhi2, &sdhi0_device, &sdhi2_device, &gpio_keys_device, @@ -718,11 +770,9 @@ device_initcall(as3711_enable_lcdc_backlight); static void __init kzm_init(void) { - regulator_register_always_on(0, "fixed-1.8V", fixed1v8_power_consumers, + regulator_register_always_on(2, "fixed-1.8V", fixed1v8_power_consumers, ARRAY_SIZE(fixed1v8_power_consumers), 1800000); - regulator_register_always_on(1, "fixed-2.8V", fixed2v8_power_consumers, - ARRAY_SIZE(fixed2v8_power_consumers), 2800000); - regulator_register_fixed(2, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + regulator_register_fixed(3, dummy_supplies, ARRAY_SIZE(dummy_supplies)); pinctrl_register_mappings(kzm_pinctrl_map, ARRAY_SIZE(kzm_pinctrl_map)); @@ -740,10 +790,6 @@ static void __init kzm_init(void) /* enable SD */ gpio_request(GPIO_FN_SDHI0_VCCQ_MC0_ON, NULL); - gpio_request_one(15, GPIOF_OUT_INIT_HIGH, NULL); /* power */ - - /* enable Micro SD */ - gpio_request_one(14, GPIOF_OUT_INIT_HIGH, NULL); /* power */ #ifdef CONFIG_CACHE_L2X0 /* Early BRESP enable, Shared attribute override enable, 64K*8way */ diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index 5bc1a7a..2b60f2b 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -1149,7 +1149,7 @@ static struct sh_mmcif_plat_data sh_mmcif_plat = { .slave_id_rx = SHDMA_SLAVE_MMCIF_RX, }; -static struct platform_device sh_mmcif_device = { +static struct platform_device sh_mmcif_device __maybe_unused = { .name = "sh_mmcif", .id = 0, .dev = { diff --git a/arch/arm/mach-shmobile/board-marzen-reference.c b/arch/arm/mach-shmobile/board-marzen-reference.c new file mode 100644 index 0000000..480d882 --- /dev/null +++ b/arch/arm/mach-shmobile/board-marzen-reference.c @@ -0,0 +1,75 @@ +/* + * marzen board support - Reference DT implementation + * + * Copyright (C) 2011 Renesas Solutions Corp. + * Copyright (C) 2011 Magnus Damm + * Copyright (C) 2013 Simon Horman + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <linux/pinctrl/machine.h> +#include <mach/r8a7779.h> +#include <mach/common.h> +#include <mach/irqs.h> +#include <asm/irq.h> +#include <asm/mach/arch.h> + +static const struct pinctrl_map marzen_pinctrl_map[] = { + /* SCIF2 (CN18: DEBUG0) */ + PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.2", "pfc-r8a7779", + "scif2_data_c", "scif2"), + /* SCIF4 (CN19: DEBUG1) */ + PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.4", "pfc-r8a7779", + "scif4_data", "scif4"), + /* SDHI0 */ + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7779", + "sdhi0_data4", "sdhi0"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7779", + "sdhi0_ctrl", "sdhi0"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7779", + "sdhi0_cd", "sdhi0"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7779", + "sdhi0_wp", "sdhi0"), + /* SMSC */ + PIN_MAP_MUX_GROUP_DEFAULT("smsc911x", "pfc-r8a7779", + "intc_irq1_b", "intc"), + PIN_MAP_MUX_GROUP_DEFAULT("smsc911x", "pfc-r8a7779", + "lbsc_ex_cs0", "lbsc"), +}; + +static void __init marzen_init(void) +{ + pinctrl_register_mappings(marzen_pinctrl_map, + ARRAY_SIZE(marzen_pinctrl_map)); + r8a7779_pinmux_init(); + + r8a7779_add_standard_devices_dt(); +} + +static const char *marzen_boards_compat_dt[] __initdata = { + "renesas,marzen-reference", + NULL, +}; + +DT_MACHINE_START(MARZEN, "marzen") + .smp = smp_ops(r8a7779_smp_ops), + .map_io = r8a7779_map_io, + .init_early = r8a7779_init_delay, + .nr_irqs = NR_IRQS_LEGACY, + .init_irq = r8a7779_init_irq_dt, + .init_machine = marzen_init, + .init_time = shmobile_timer_init, + .dt_compat = marzen_boards_compat_dt, +MACHINE_END diff --git a/arch/arm/mach-shmobile/board-marzen.c b/arch/arm/mach-shmobile/board-marzen.c index 5852331..2333a2d 100644 --- a/arch/arm/mach-shmobile/board-marzen.c +++ b/arch/arm/mach-shmobile/board-marzen.c @@ -67,7 +67,7 @@ static struct resource smsc911x_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = gic_spi(28), /* IRQ 1 */ + .start = gic_iid(0x3c), /* IRQ 1 */ .flags = IORESOURCE_IRQ, }, }; @@ -97,7 +97,7 @@ static struct resource sdhi0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = gic_spi(104), + .start = gic_iid(0x88), .flags = IORESOURCE_IRQ, }, }; @@ -215,7 +215,7 @@ static struct resource ehci0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = gic_spi(44), + .start = gic_iid(0x4c), .flags = IORESOURCE_IRQ, }, }; @@ -239,7 +239,7 @@ static struct resource ehci1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = gic_spi(45), + .start = gic_iid(0x4d), .flags = IORESOURCE_IRQ, }, }; @@ -269,7 +269,7 @@ static struct resource ohci0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = gic_spi(44), + .start = gic_iid(0x4c), .flags = IORESOURCE_IRQ, }, }; @@ -293,7 +293,7 @@ static struct resource ohci1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = gic_spi(45), + .start = gic_iid(0x4d), .flags = IORESOURCE_IRQ, }, }; diff --git a/drivers/clk/mmp/clk-mmp2.c b/drivers/clk/mmp/clk-mmp2.c index ade4358..d1f1a19 100644 --- a/drivers/clk/mmp/clk-mmp2.c +++ b/drivers/clk/mmp/clk-mmp2.c @@ -221,7 +221,7 @@ void __init mmp2_clk_init(void) clk = mmp_clk_register_apbc("gpio", "vctcxo", apbc_base + APBC_GPIO, 10, 0, &clk_lock); - clk_register_clkdev(clk, NULL, "pxa-gpio"); + clk_register_clkdev(clk, NULL, "mmp2-gpio"); clk = mmp_clk_register_apbc("kpc", "clk32", apbc_base + APBC_KPC, 10, 0, &clk_lock); diff --git a/drivers/clk/mmp/clk-pxa168.c b/drivers/clk/mmp/clk-pxa168.c index e8d036c..28b3b51 100644 --- a/drivers/clk/mmp/clk-pxa168.c +++ b/drivers/clk/mmp/clk-pxa168.c @@ -172,7 +172,7 @@ void __init pxa168_clk_init(void) clk = mmp_clk_register_apbc("gpio", "vctcxo", apbc_base + APBC_GPIO, 10, 0, &clk_lock); - clk_register_clkdev(clk, NULL, "pxa-gpio"); + clk_register_clkdev(clk, NULL, "mmp-gpio"); clk = mmp_clk_register_apbc("kpc", "clk32", apbc_base + APBC_KPC, 10, 0, &clk_lock); diff --git a/drivers/clk/mmp/clk-pxa910.c b/drivers/clk/mmp/clk-pxa910.c index 7048c31..6ec0569 100644 --- a/drivers/clk/mmp/clk-pxa910.c +++ b/drivers/clk/mmp/clk-pxa910.c @@ -177,7 +177,7 @@ void __init pxa910_clk_init(void) clk = mmp_clk_register_apbc("gpio", "vctcxo", apbc_base + APBC_GPIO, 10, 0, &clk_lock); - clk_register_clkdev(clk, NULL, "pxa-gpio"); + clk_register_clkdev(clk, NULL, "mmp-gpio"); clk = mmp_clk_register_apbc("kpc", "clk32", apbc_base + APBC_KPC, 10, 0, &clk_lock); diff --git a/drivers/gpio/gpio-pxa.c b/drivers/gpio/gpio-pxa.c index 2d3af98..d7a5c9d 100644 --- a/drivers/gpio/gpio-pxa.c +++ b/drivers/gpio/gpio-pxa.c @@ -85,20 +85,61 @@ struct pxa_gpio_chip { #endif }; -enum { +enum pxa_gpio_type { PXA25X_GPIO = 0, PXA26X_GPIO, PXA27X_GPIO, PXA3XX_GPIO, PXA93X_GPIO, MMP_GPIO = 0x10, + MMP2_GPIO, +}; + +struct pxa_gpio_id { + enum pxa_gpio_type type; + int gpio_nums; }; static DEFINE_SPINLOCK(gpio_lock); static struct pxa_gpio_chip *pxa_gpio_chips; -static int gpio_type; +static enum pxa_gpio_type gpio_type; static void __iomem *gpio_reg_base; +static struct pxa_gpio_id pxa25x_id = { + .type = PXA25X_GPIO, + .gpio_nums = 85, +}; + +static struct pxa_gpio_id pxa26x_id = { + .type = PXA26X_GPIO, + .gpio_nums = 90, +}; + +static struct pxa_gpio_id pxa27x_id = { + .type = PXA27X_GPIO, + .gpio_nums = 121, +}; + +static struct pxa_gpio_id pxa3xx_id = { + .type = PXA3XX_GPIO, + .gpio_nums = 128, +}; + +static struct pxa_gpio_id pxa93x_id = { + .type = PXA93X_GPIO, + .gpio_nums = 192, +}; + +static struct pxa_gpio_id mmp_id = { + .type = MMP_GPIO, + .gpio_nums = 128, +}; + +static struct pxa_gpio_id mmp2_id = { + .type = MMP2_GPIO, + .gpio_nums = 192, +}; + #define for_each_gpio_chip(i, c) \ for (i = 0, c = &pxa_gpio_chips[0]; i <= pxa_last_gpio; i += 32, c++) @@ -431,47 +472,39 @@ static struct irq_chip pxa_muxed_gpio_chip = { .irq_set_wake = pxa_gpio_set_wake, }; -static int pxa_gpio_nums(void) +static int pxa_gpio_nums(struct platform_device *pdev) { + const struct platform_device_id *id = platform_get_device_id(pdev); + struct pxa_gpio_id *pxa_id = (struct pxa_gpio_id *)id->driver_data; int count = 0; -#ifdef CONFIG_ARCH_PXA - if (cpu_is_pxa25x()) { -#ifdef CONFIG_CPU_PXA26x - count = 89; - gpio_type = PXA26X_GPIO; -#elif defined(CONFIG_PXA25x) - count = 84; - gpio_type = PXA26X_GPIO; -#endif /* CONFIG_CPU_PXA26x */ - } else if (cpu_is_pxa27x()) { - count = 120; - gpio_type = PXA27X_GPIO; - } else if (cpu_is_pxa93x()) { - count = 191; - gpio_type = PXA93X_GPIO; - } else if (cpu_is_pxa3xx()) { - count = 127; - gpio_type = PXA3XX_GPIO; - } -#endif /* CONFIG_ARCH_PXA */ - -#ifdef CONFIG_ARCH_MMP - if (cpu_is_pxa168() || cpu_is_pxa910()) { - count = 127; - gpio_type = MMP_GPIO; - } else if (cpu_is_mmp2()) { - count = 191; - gpio_type = MMP_GPIO; + switch (pxa_id->type) { + case PXA25X_GPIO: + case PXA26X_GPIO: + case PXA27X_GPIO: + case PXA3XX_GPIO: + case PXA93X_GPIO: + case MMP_GPIO: + case MMP2_GPIO: + gpio_type = pxa_id->type; + count = pxa_id->gpio_nums - 1; + break; + default: + count = -EINVAL; + break; } -#endif /* CONFIG_ARCH_MMP */ return count; } #ifdef CONFIG_OF static struct of_device_id pxa_gpio_dt_ids[] = { - { .compatible = "mrvl,pxa-gpio" }, - { .compatible = "mrvl,mmp-gpio", .data = (void *)MMP_GPIO }, + { .compatible = "intel,pxa25x-gpio", .data = &pxa25x_id, }, + { .compatible = "intel,pxa26x-gpio", .data = &pxa26x_id, }, + { .compatible = "intel,pxa27x-gpio", .data = &pxa27x_id, }, + { .compatible = "intel,pxa3xx-gpio", .data = &pxa3xx_id, }, + { .compatible = "marvell,pxa93x-gpio", .data = &pxa93x_id, }, + { .compatible = "marvell,mmp-gpio", .data = &mmp_id, }, + { .compatible = "marvell,mmp2-gpio", .data = &mmp2_id, }, {} }; @@ -491,16 +524,18 @@ const struct irq_domain_ops pxa_irq_domain_ops = { static int pxa_gpio_probe_dt(struct platform_device *pdev) { - int ret, nr_banks, nr_gpios; + int ret, nr_gpios; struct device_node *prev, *next, *np = pdev->dev.of_node; const struct of_device_id *of_id = of_match_device(pxa_gpio_dt_ids, &pdev->dev); + const struct pxa_gpio_id *gpio_id; - if (!of_id) { + if (!of_id || !of_id->data) { dev_err(&pdev->dev, "Failed to find gpio controller\n"); return -EFAULT; } - gpio_type = (int)of_id->data; + gpio_id = of_id->data; + gpio_type = gpio_id->type; next = of_get_next_child(np, NULL); prev = next; @@ -509,14 +544,8 @@ static int pxa_gpio_probe_dt(struct platform_device *pdev) ret = -EINVAL; goto err; } - for (nr_banks = 1; ; nr_banks++) { - next = of_get_next_child(np, prev); - if (!next) - break; - prev = next; - } of_node_put(prev); - nr_gpios = nr_banks << 5; + nr_gpios = gpio_id->gpio_nums; pxa_last_gpio = nr_gpios - 1; irq_base = irq_alloc_descs(-1, 0, nr_gpios, 0); @@ -545,19 +574,18 @@ static int pxa_gpio_probe(struct platform_device *pdev) int gpio, irq, ret, use_of = 0; int irq0 = 0, irq1 = 0, irq_mux, gpio_offset = 0; - ret = pxa_gpio_probe_dt(pdev); - if (ret < 0) { - pxa_last_gpio = pxa_gpio_nums(); -#ifdef CONFIG_ARCH_PXA - if (gpio_is_pxa_type(gpio_type)) - irq_base = PXA_GPIO_TO_IRQ(0); -#endif -#ifdef CONFIG_ARCH_MMP - if (gpio_is_mmp_type(gpio_type)) - irq_base = MMP_GPIO_TO_IRQ(0); -#endif + info = dev_get_platdata(&pdev->dev); + if (info) { + irq_base = info->irq_base; + if (irq_base <= 0) + return -EINVAL; + pxa_last_gpio = pxa_gpio_nums(pdev); } else { + irq_base = 0; use_of = 1; + ret = pxa_gpio_probe_dt(pdev); + if (ret < 0) + return -EINVAL; } if (!pxa_last_gpio) @@ -594,7 +622,6 @@ static int pxa_gpio_probe(struct platform_device *pdev) } /* Initialize GPIO chips */ - info = dev_get_platdata(&pdev->dev); pxa_init_gpio_chip(pxa_last_gpio, info ? info->gpio_set_wake : NULL); /* clear all GPIO edge detects */ @@ -634,12 +661,24 @@ static int pxa_gpio_probe(struct platform_device *pdev) return 0; } +static const struct platform_device_id gpio_id_table[] = { + { "pxa25x-gpio", (unsigned long)&pxa25x_id }, + { "pxa26x-gpio", (unsigned long)&pxa26x_id }, + { "pxa27x-gpio", (unsigned long)&pxa27x_id }, + { "pxa3xx-gpio", (unsigned long)&pxa3xx_id }, + { "pxa93x-gpio", (unsigned long)&pxa93x_id }, + { "mmp-gpio", (unsigned long)&mmp_id }, + { "mmp2-gpio", (unsigned long)&mmp2_id }, + { }, +}; + static struct platform_driver pxa_gpio_driver = { .probe = pxa_gpio_probe, .driver = { .name = "pxa-gpio", .of_match_table = of_match_ptr(pxa_gpio_dt_ids), }, + .id_table = gpio_id_table, }; static int __init pxa_gpio_init(void) diff --git a/include/linux/gpio-pxa.h b/include/linux/gpio-pxa.h index d755b28..d90ebbe 100644 --- a/include/linux/gpio-pxa.h +++ b/include/linux/gpio-pxa.h @@ -14,6 +14,7 @@ extern int pxa_last_gpio; extern int pxa_irq_to_gpio(int irq); struct pxa_gpio_platform_data { + int irq_base; int (*gpio_set_wake)(unsigned int gpio, unsigned int on); }; |