Merge branch 'pxa-tosa' into pxa

Conflicts:

	arch/arm/mach-pxa/Kconfig
	arch/arm/mach-pxa/tosa.c
	arch/arm/mach-pxa/spitz.c

22 files changed, 1539 insertions, 97 deletions

diff --git a/MAINTAINERS b/MAINTAINERS
index 3b228e2..20aef95 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -584,6 +584,8 @@ L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
 
 ARM/TOSA MACHINE SUPPORT
+P:	Dmitry Baryshkov
+M:	dbaryshkov@gmail.com
 P:	Dirk Opfer
 M:	dirk@opfer-online.de
 S:	Maintained
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 1a7ceb8..7f9664d 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -310,4 +310,13 @@ config PXA_PWM
 	default BACKLIGHT_PWM
 	help
 	  Enable support for PXA2xx/PXA3xx PWM controllers
+
+config TOSA_BT
+	tristate "Control the state of built-in bluetooth chip on Sharp SL-6000"
+	depends on MACH_TOSA
+	select RFKILL
+	help
+	  This is a simple driver that is able to control
+	  the state of built in bluetooth chip on tosa.
+
 endif
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index 0865236..b282412 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -4,7 +4,7 @@
 
 # Common support (must be linked before board specific support)
 obj-y				+= clock.o devices.o generic.o irq.o dma.o \
-				   time.o gpio.o
+				   time.o gpio.o reset.o
 obj-$(CONFIG_PM)		+= pm.o sleep.o standby.o
 obj-$(CONFIG_CPU_FREQ)		+= cpu-pxa.o
 
@@ -61,3 +61,5 @@ obj-$(CONFIG_LEDS)		+= $(led-y)
 ifeq ($(CONFIG_PCI),y)
 obj-$(CONFIG_MACH_ARMCORE) += cm-x270-pci.o
 endif
+
+obj-$(CONFIG_TOSA_BT)		+= tosa-bt.o
diff --git a/arch/arm/mach-pxa/reset.c b/arch/arm/mach-pxa/reset.c
new file mode 100644
index 0000000..9d39dea
--- /dev/null
+++ b/arch/arm/mach-pxa/reset.c
@@ -0,0 +1,96 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <asm/io.h>
+#include <asm/proc-fns.h>
+
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-regs.h>
+
+static void do_hw_reset(void);
+
+static int reset_gpio = -1;
+
+int init_gpio_reset(int gpio)
+{
+	int rc;
+
+	rc = gpio_request(gpio, "reset generator");
+	if (rc) {
+		printk(KERN_ERR "Can't request reset_gpio\n");
+		goto out;
+	}
+
+	rc = gpio_direction_input(gpio);
+	if (rc) {
+		printk(KERN_ERR "Can't configure reset_gpio for input\n");
+		gpio_free(gpio);
+		goto out;
+	}
+
+out:
+	if (!rc)
+		reset_gpio = gpio;
+
+	return rc;
+}
+
+/*
+ * Trigger GPIO reset.
+ * This covers various types of logic connecting gpio pin
+ * to RESET pins (nRESET or GPIO_RESET):
+ */
+static void do_gpio_reset(void)
+{
+	BUG_ON(reset_gpio == -1);
+
+	/* drive it low */
+	gpio_direction_output(reset_gpio, 0);
+	mdelay(2);
+	/* rising edge or drive high */
+	gpio_set_value(reset_gpio, 1);
+	mdelay(2);
+	/* falling edge */
+	gpio_set_value(reset_gpio, 0);
+
+	/* give it some time */
+	mdelay(10);
+
+	WARN_ON(1);
+	/* fallback */
+	do_hw_reset();
+}
+
+static void do_hw_reset(void)
+{
+	/* Initialize the watchdog and let it fire */
+	OWER = OWER_WME;
+	OSSR = OSSR_M3;
+	OSMR3 = OSCR + 368640;	/* ... in 100 ms */
+}
+
+void arch_reset(char mode)
+{
+	if (cpu_is_pxa2xx())
+		RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
+
+	switch (mode) {
+	case 's':
+		/* Jump into ROM at address 0 */
+		cpu_reset(0);
+		break;
+	case 'h':
+		do_hw_reset();
+		break;
+	case 'g':
+		do_gpio_reset();
+		break;
+	}
+}
+
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index e7d0fcd..d58c3e9 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -38,6 +38,7 @@
 #include <asm/arch/pxa-regs.h>
 #include <asm/arch/pxa2xx-regs.h>
 #include <asm/arch/pxa2xx-gpio.h>
+#include <asm/arch/pxa27x-udc.h>
 #include <asm/arch/irda.h>
 #include <asm/arch/mmc.h>
 #include <asm/arch/ohci.h>
@@ -529,11 +530,7 @@ static struct platform_device *devices[] __initdata = {
 
 static void spitz_poweroff(void)
 {
-	pxa_gpio_mode(SPITZ_GPIO_ON_RESET | GPIO_OUT);
-	GPSR(SPITZ_GPIO_ON_RESET) = GPIO_bit(SPITZ_GPIO_ON_RESET);
-
-	mdelay(1000);
-	arm_machine_restart('h');
+	arm_machine_restart('g');
 }
 
 static void spitz_restart(char mode)
@@ -547,6 +544,7 @@ static void spitz_restart(char mode)
 
 static void __init common_init(void)
 {
+	init_gpio_reset(SPITZ_GPIO_ON_RESET);
 	pm_power_off = spitz_poweroff;
 	arm_pm_restart = spitz_restart;
 
diff --git a/arch/arm/mach-pxa/tosa-bt.c b/arch/arm/mach-pxa/tosa-bt.c
new file mode 100644
index 0000000..7d85054
--- /dev/null
+++ b/arch/arm/mach-pxa/tosa-bt.c
@@ -0,0 +1,150 @@
+/*
+ * Bluetooth built-in chip control
+ *
+ * Copyright (c) 2008 Dmitry Baryshkov
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/rfkill.h>
+
+#include <asm/arch/tosa_bt.h>
+
+static void tosa_bt_on(struct tosa_bt_data *data)
+{
+	gpio_set_value(data->gpio_reset, 0);
+	gpio_set_value(data->gpio_pwr, 1);
+	gpio_set_value(data->gpio_reset, 1);
+	mdelay(20);
+	gpio_set_value(data->gpio_reset, 0);
+}
+
+static void tosa_bt_off(struct tosa_bt_data *data)
+{
+	gpio_set_value(data->gpio_reset, 1);
+	mdelay(10);
+	gpio_set_value(data->gpio_pwr, 0);
+	gpio_set_value(data->gpio_reset, 0);
+}
+
+static int tosa_bt_toggle_radio(void *data, enum rfkill_state state)
+{
+	pr_info("BT_RADIO going: %s\n",
+			state == RFKILL_STATE_ON ? "on" : "off");
+
+	if (state == RFKILL_STATE_ON) {
+		pr_info("TOSA_BT: going ON\n");
+		tosa_bt_on(data);
+	} else {
+		pr_info("TOSA_BT: going OFF\n");
+		tosa_bt_off(data);
+	}
+	return 0;
+}
+
+static int tosa_bt_probe(struct platform_device *dev)
+{
+	int rc;
+	struct rfkill *rfk;
+
+	struct tosa_bt_data *data = dev->dev.platform_data;
+
+	rc = gpio_request(data->gpio_reset, "Bluetooth reset");
+	if (rc)
+		goto err_reset;
+	rc = gpio_direction_output(data->gpio_reset, 0);
+	if (rc)
+		goto err_reset_dir;
+	rc = gpio_request(data->gpio_pwr, "Bluetooth power");
+	if (rc)
+		goto err_pwr;
+	rc = gpio_direction_output(data->gpio_pwr, 0);
+	if (rc)
+		goto err_pwr_dir;
+
+	rfk = rfkill_allocate(&dev->dev, RFKILL_TYPE_BLUETOOTH);
+	if (!rfk) {
+		rc = -ENOMEM;
+		goto err_rfk_alloc;
+	}
+
+	rfk->name = "tosa-bt";
+	rfk->toggle_radio = tosa_bt_toggle_radio;
+	rfk->data = data;
+#ifdef CONFIG_RFKILL_LEDS
+	rfk->led_trigger.name = "tosa-bt";
+#endif
+
+	rc = rfkill_register(rfk);
+	if (rc)
+		goto err_rfkill;
+
+	platform_set_drvdata(dev, rfk);
+
+	return 0;
+
+err_rfkill:
+	if (rfk)
+		rfkill_free(rfk);
+	rfk = NULL;
+err_rfk_alloc:
+	tosa_bt_off(data);
+err_pwr_dir:
+	gpio_free(data->gpio_pwr);
+err_pwr:
+err_reset_dir:
+	gpio_free(data->gpio_reset);
+err_reset:
+	return rc;
+}
+
+static int __devexit tosa_bt_remove(struct platform_device *dev)
+{
+	struct tosa_bt_data *data = dev->dev.platform_data;
+	struct rfkill *rfk = platform_get_drvdata(dev);
+
+	platform_set_drvdata(dev, NULL);
+
+	if (rfk)
+		rfkill_unregister(rfk);
+	rfk = NULL;
+
+	tosa_bt_off(data);
+
+	gpio_free(data->gpio_pwr);
+	gpio_free(data->gpio_reset);
+
+	return 0;
+}
+
+static struct platform_driver tosa_bt_driver = {
+	.probe = tosa_bt_probe,
+	.remove = __devexit_p(tosa_bt_remove),
+
+	.driver = {
+		.name = "tosa-bt",
+		.owner = THIS_MODULE,
+	},
+};
+
+
+static int __init tosa_bt_init(void)
+{
+	return platform_driver_register(&tosa_bt_driver);
+}
+
+static void __exit tosa_bt_exit(void)
+{
+	platform_driver_unregister(&tosa_bt_driver);
+}
+
+module_init(tosa_bt_init);
+module_exit(tosa_bt_exit);
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index ab4a9f5..2d49de5 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -18,30 +18,31 @@
 #include <linux/major.h>
 #include <linux/fs.h>
 #include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/fb.h>
 #include <linux/mmc/host.h>
+#include <linux/mfd/tc6393xb.h>
+#include <linux/mfd/tmio.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
 #include <linux/pm.h>
-#include <linux/delay.h>
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 #include <linux/gpio.h>
+#include <linux/pda_power.h>
+#include <linux/rfkill.h>
 
 #include <asm/setup.h>
-#include <asm/memory.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
-#include <asm/irq.h>
-#include <asm/system.h>
-#include <asm/arch/pxa-regs.h>
 #include <asm/arch/pxa2xx-regs.h>
 #include <asm/arch/mfp-pxa25x.h>
 #include <asm/arch/irda.h>
 #include <asm/arch/i2c.h>
 #include <asm/arch/mmc.h>
 #include <asm/arch/udc.h>
+#include <asm/arch/tosa_bt.h>
 
 #include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
 #include <asm/arch/tosa.h>
 
 #include <asm/hardware/scoop.h>
@@ -86,7 +87,7 @@ static unsigned long tosa_pin_config[] = {
 	GPIO6_MMC_CLK,
 	GPIO8_MMC_CS0,
 	GPIO9_GPIO, /* Detect */
-	// GPIO10 nSD_INT
+	GPIO10_GPIO, /* nSD_INT */
 
 	/* CF */
 	GPIO13_GPIO, /* CD_IRQ */
@@ -124,29 +125,25 @@ static unsigned long tosa_pin_config[] = {
 	GPIO44_BTUART_CTS,
 	GPIO45_BTUART_RTS,
 
-	/* IrDA */
-	GPIO46_STUART_RXD,
-	GPIO47_STUART_TXD,
-
 	/* Keybd */
-	GPIO58_GPIO,
-	GPIO59_GPIO,
-	GPIO60_GPIO,
-	GPIO61_GPIO,
-	GPIO62_GPIO,
-	GPIO63_GPIO,
-	GPIO64_GPIO,
-	GPIO65_GPIO,
-	GPIO66_GPIO,
-	GPIO67_GPIO,
-	GPIO68_GPIO,
-	GPIO69_GPIO,
-	GPIO70_GPIO,
-	GPIO71_GPIO,
-	GPIO72_GPIO,
-	GPIO73_GPIO,
-	GPIO74_GPIO,
-	GPIO75_GPIO,
+	GPIO58_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO59_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO60_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO61_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO62_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO63_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO64_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO65_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO66_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO67_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO68_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO69_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO70_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO71_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO72_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO73_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO74_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO75_GPIO | MFP_LPM_DRIVE_LOW,
 
 	/* SPI */
 	GPIO81_SSP2_CLK_OUT,
@@ -154,6 +151,17 @@ static unsigned long tosa_pin_config[] = {
 	GPIO83_SSP2_TXD,
 };
 
+static unsigned long tosa_pin_irda_off[] = {
+	GPIO46_STUART_RXD,
+	GPIO47_GPIO | MFP_LPM_DRIVE_LOW,
+};
+
+static unsigned long tosa_pin_irda_on[] = {
+	GPIO46_STUART_RXD,
+	GPIO47_STUART_TXD,
+};
+
+
 /*
  * SCOOP Device
  */
@@ -249,6 +257,15 @@ static int tosa_mci_init(struct device *dev, irq_handler_t tosa_detect_int, void
 
 	tosa_mci_platform_data.detect_delay = msecs_to_jiffies(250);
 
+	err = gpio_request(TOSA_GPIO_nSD_DETECT, "MMC/SD card detect");
+	if (err) {
+		printk(KERN_ERR "tosa_mci_init: can't request nSD_DETECT gpio\n");
+		goto err_gpio_detect;
+	}
+	err = gpio_direction_input(TOSA_GPIO_nSD_DETECT);
+	if (err)
+		goto err_gpio_detect_dir;
+
 	err = request_irq(TOSA_IRQ_GPIO_nSD_DETECT, tosa_detect_int,
 			  IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
 				"MMC/SD card detect", data);
@@ -257,7 +274,7 @@ static int tosa_mci_init(struct device *dev, irq_handler_t tosa_detect_int, void
 		goto err_irq;
 	}
 
-	err = gpio_request(TOSA_GPIO_SD_WP, "sd_wp");
+	err = gpio_request(TOSA_GPIO_SD_WP, "SD Write Protect");
 	if (err) {
 		printk(KERN_ERR "tosa_mci_init: can't request SD_WP gpio\n");
 		goto err_gpio_wp;
@@ -266,7 +283,7 @@ static int tosa_mci_init(struct device *dev, irq_handler_t tosa_detect_int, void
 	if (err)
 		goto err_gpio_wp_dir;
 
-	err = gpio_request(TOSA_GPIO_PWR_ON, "sd_pwr");
+	err = gpio_request(TOSA_GPIO_PWR_ON, "SD Power");
 	if (err) {
 		printk(KERN_ERR "tosa_mci_init: can't request SD_PWR gpio\n");
 		goto err_gpio_pwr;
@@ -275,8 +292,20 @@ static int tosa_mci_init(struct device *dev, irq_handler_t tosa_detect_int, void
 	if (err)
 		goto err_gpio_pwr_dir;
 
+	err = gpio_request(TOSA_GPIO_nSD_INT, "SD Int");
+	if (err) {
+		printk(KERN_ERR "tosa_mci_init: can't request SD_PWR gpio\n");
+		goto err_gpio_int;
+	}
+	err = gpio_direction_input(TOSA_GPIO_nSD_INT);
+	if (err)
+		goto err_gpio_int_dir;
+
 	return 0;
 
+err_gpio_int_dir:
+	gpio_free(TOSA_GPIO_nSD_INT);
+err_gpio_int:
 err_gpio_pwr_dir:
 	gpio_free(TOSA_GPIO_PWR_ON);
 err_gpio_pwr:
@@ -285,6 +314,9 @@ err_gpio_wp_dir:
 err_gpio_wp:
 	free_irq(TOSA_IRQ_GPIO_nSD_DETECT, data);
 err_irq:
+err_gpio_detect_dir:
+	gpio_free(TOSA_GPIO_nSD_DETECT);
+err_gpio_detect:
 	return err;
 }
 
@@ -306,9 +338,11 @@ static int tosa_mci_get_ro(struct device *dev)
 
 static void tosa_mci_exit(struct device *dev, void *data)
 {
+	gpio_free(TOSA_GPIO_nSD_INT);
 	gpio_free(TOSA_GPIO_PWR_ON);
 	gpio_free(TOSA_GPIO_SD_WP);
 	free_irq(TOSA_IRQ_GPIO_nSD_DETECT, data);
+	gpio_free(TOSA_GPIO_nSD_DETECT);
 }
 
 static struct pxamci_platform_data tosa_mci_platform_data = {
@@ -322,29 +356,55 @@ static struct pxamci_platform_data tosa_mci_platform_data = {
 /*
  * Irda
  */
+static void tosa_irda_transceiver_mode(struct device *dev, int mode)
+{
+	if (mode & IR_OFF) {
+		gpio_set_value(TOSA_GPIO_IR_POWERDWN, 0);
+		pxa2xx_mfp_config(ARRAY_AND_SIZE(tosa_pin_irda_off));
+		gpio_direction_output(TOSA_GPIO_IRDA_TX, 0);
+	} else {
+		pxa2xx_mfp_config(ARRAY_AND_SIZE(tosa_pin_irda_on));
+		gpio_set_value(TOSA_GPIO_IR_POWERDWN, 1);
+	}
+}
+
 static int tosa_irda_startup(struct device *dev)
 {
 	int ret;
 
+	ret = gpio_request(TOSA_GPIO_IRDA_TX, "IrDA TX");
+	if (ret)
+		goto err_tx;
+	ret = gpio_direction_output(TOSA_GPIO_IRDA_TX, 0);
+	if (ret)
+		goto err_tx_dir;
+
 	ret = gpio_request(TOSA_GPIO_IR_POWERDWN, "IrDA powerdown");
 	if (ret)
-		return ret;
+		goto err_pwr;
 
 	ret = gpio_direction_output(TOSA_GPIO_IR_POWERDWN, 0);
 	if (ret)
-		gpio_free(TOSA_GPIO_IR_POWERDWN);
+		goto err_pwr_dir;
 
-	return ret;
-	}
+	tosa_irda_transceiver_mode(dev, IR_SIRMODE | IR_OFF);
 
-static void tosa_irda_shutdown(struct device *dev)
-{
+	return 0;
+
+err_pwr_dir:
 	gpio_free(TOSA_GPIO_IR_POWERDWN);
+err_pwr:
+err_tx_dir:
+	gpio_free(TOSA_GPIO_IRDA_TX);
+err_tx:
+	return ret;
 }
 
-static void tosa_irda_transceiver_mode(struct device *dev, int mode)
+static void tosa_irda_shutdown(struct device *dev)
 {
-	gpio_set_value(TOSA_GPIO_IR_POWERDWN, !(mode & IR_OFF));
+	tosa_irda_transceiver_mode(dev, IR_SIRMODE | IR_OFF);
+	gpio_free(TOSA_GPIO_IR_POWERDWN);
+	gpio_free(TOSA_GPIO_IRDA_TX);
 }
 
 static struct pxaficp_platform_data tosa_ficp_platform_data = {
@@ -355,6 +415,70 @@ static struct pxaficp_platform_data tosa_ficp_platform_data = {
 };
 
 /*
+ * Tosa AC IN
+ */
+static int tosa_power_init(struct device *dev)
+{
+	int ret = gpio_request(TOSA_GPIO_AC_IN, "ac in");
+	if (ret)
+		goto err_gpio_req;
+
+	ret = gpio_direction_input(TOSA_GPIO_AC_IN);
+	if (ret)
+		goto err_gpio_in;
+
+	return 0;
+
+err_gpio_in:
+	gpio_free(TOSA_GPIO_AC_IN);
+err_gpio_req:
+	return ret;
+}
+
+static void tosa_power_exit(struct device *dev)
+{
+	gpio_free(TOSA_GPIO_AC_IN);
+}
+
+static int tosa_power_ac_online(void)
+{
+	return gpio_get_value(TOSA_GPIO_AC_IN) == 0;
+}
+
+static char *tosa_ac_supplied_to[] = {
+	"main-battery",
+	"backup-battery",
+	"jacket-battery",
+};
+
+static struct pda_power_pdata tosa_power_data = {
+	.init			= tosa_power_init,
+	.is_ac_online		= tosa_power_ac_online,
+	.exit			= tosa_power_exit,
+	.supplied_to		= tosa_ac_supplied_to,
+	.num_supplicants	= ARRAY_SIZE(tosa_ac_supplied_to),
+};
+
+static struct resource tosa_power_resource[] = {
+	{
+		.name		= "ac",
+		.start		= gpio_to_irq(TOSA_GPIO_AC_IN),
+		.end		= gpio_to_irq(TOSA_GPIO_AC_IN),
+		.flags		= IORESOURCE_IRQ |
+				  IORESOURCE_IRQ_HIGHEDGE |
+				  IORESOURCE_IRQ_LOWEDGE,
+	},
+};
+
+static struct platform_device tosa_power_device = {
+	.name			= "pda-power",
+	.id			= -1,
+	.dev.platform_data	= &tosa_power_data,
+	.resource		= tosa_power_resource,
+	.num_resources		= ARRAY_SIZE(tosa_power_resource),
+};
+
+/*
  * Tosa Keyboard
  */
 static struct platform_device tosakbd_device = {
@@ -439,7 +563,7 @@ static struct gpio_led tosa_gpio_leds[] = {
 	},
 	{
 		.name			= "tosa:blue:bluetooth",
-		.default_trigger	= "none",
+		.default_trigger	= "tosa-bt",
 		.gpio			= TOSA_GPIO_BT_LED,
 	},
 };
@@ -457,21 +581,184 @@ static struct platform_device tosaled_device = {
 	},
 };
 
+/*
+ * Toshiba Mobile IO Controller
+ */
+static struct resource tc6393xb_resources[] = {
+	[0] = {
+		.start	= TOSA_LCDC_PHYS,
+		.end	= TOSA_LCDC_PHYS + 0x3ffffff,
+		.flags	= IORESOURCE_MEM,
+	},
+
+	[1] = {
+		.start	= TOSA_IRQ_GPIO_TC6393XB_INT,
+		.end	= TOSA_IRQ_GPIO_TC6393XB_INT,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+
+static int tosa_tc6393xb_enable(struct platform_device *dev)
+{
+	int rc;
+
+	rc = gpio_request(TOSA_GPIO_TC6393XB_REST_IN, "tc6393xb #pclr");
+	if (rc)
+		goto err_req_pclr;
+	rc = gpio_request(TOSA_GPIO_TC6393XB_SUSPEND, "tc6393xb #suspend");
+	if (rc)
+		goto err_req_suspend;
+	rc = gpio_request(TOSA_GPIO_TC6393XB_L3V_ON, "l3v");
+	if (rc)
+		goto err_req_l3v;
+	rc = gpio_direction_output(TOSA_GPIO_TC6393XB_L3V_ON, 0);
+	if (rc)
+		goto err_dir_l3v;
+	rc = gpio_direction_output(TOSA_GPIO_TC6393XB_SUSPEND, 0);
+	if (rc)
+		goto err_dir_suspend;
+	rc = gpio_direction_output(TOSA_GPIO_TC6393XB_REST_IN, 0);
+	if (rc)
+		goto err_dir_pclr;
+
+	mdelay(1);
+
+	gpio_set_value(TOSA_GPIO_TC6393XB_SUSPEND, 1);
+
+	mdelay(10);
+
+	gpio_set_value(TOSA_GPIO_TC6393XB_REST_IN, 1);
+	gpio_set_value(TOSA_GPIO_TC6393XB_L3V_ON, 1);
+
+	return 0;
+err_dir_pclr:
+err_dir_suspend:
+err_dir_l3v:
+	gpio_free(TOSA_GPIO_TC6393XB_L3V_ON);
+err_req_l3v:
+	gpio_free(TOSA_GPIO_TC6393XB_SUSPEND);
+err_req_suspend:
+	gpio_free(TOSA_GPIO_TC6393XB_REST_IN);
+err_req_pclr:
+	return rc;
+}
+
+static int tosa_tc6393xb_disable(struct platform_device *dev)
+{
+	gpio_free(TOSA_GPIO_TC6393XB_L3V_ON);
+	gpio_free(TOSA_GPIO_TC6393XB_SUSPEND);
+	gpio_free(TOSA_GPIO_TC6393XB_REST_IN);
+
+	return 0;
+}
+
+static int tosa_tc6393xb_resume(struct platform_device *dev)
+{
+	gpio_set_value(TOSA_GPIO_TC6393XB_SUSPEND, 1);
+	mdelay(10);
+	gpio_set_value(TOSA_GPIO_TC6393XB_L3V_ON, 1);
+	mdelay(10);
+
+	return 0;
+}
+
+static int tosa_tc6393xb_suspend(struct platform_device *dev)
+{
+	gpio_set_value(TOSA_GPIO_TC6393XB_L3V_ON, 0);
+	gpio_set_value(TOSA_GPIO_TC6393XB_SUSPEND, 0);
+	return 0;
+}
+
+static struct mtd_partition tosa_nand_partition[] = {
+	{
+		.name	= "smf",
+		.offset	= 0,
+		.size	= 7 * 1024 * 1024,
+	},
+	{
+		.name	= "root",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= 28 * 1024 * 1024,
+	},
+	{
+		.name	= "home",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= MTDPART_SIZ_FULL,
+	},
+};
+
+static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
+
+static struct nand_bbt_descr tosa_tc6393xb_nand_bbt = {
+	.options	= 0,
+	.offs		= 4,
+	.len		= 2,
+	.pattern	= scan_ff_pattern
+};
+
+static struct tmio_nand_data tosa_tc6393xb_nand_config = {
+	.num_partitions	= ARRAY_SIZE(tosa_nand_partition),
+	.partition	= tosa_nand_partition,
+	.badblock_pattern = &tosa_tc6393xb_nand_bbt,
+};
+
+static struct tc6393xb_platform_data tosa_tc6393xb_setup = {
+	.scr_pll2cr	= 0x0cc1,
+	.scr_gper	= 0x3300,
+	.scr_gpo_dsr	=
+		TOSA_TC6393XB_GPIO_BIT(TOSA_GPIO_CARD_VCC_ON),
+	.scr_gpo_doecr	=
+		TOSA_TC6393XB_GPIO_BIT(TOSA_GPIO_CARD_VCC_ON),
+
+	.irq_base	= IRQ_BOARD_START,
+	.gpio_base	= TOSA_TC6393XB_GPIO_BASE,
+
+	.enable		= tosa_tc6393xb_enable,
+	.disable	= tosa_tc6393xb_disable,
+	.suspend	= tosa_tc6393xb_suspend,
+	.resume		= tosa_tc6393xb_resume,
+
+	.nand_data	= &tosa_tc6393xb_nand_config,
+};
+
+
+static struct platform_device tc6393xb_device = {
+	.name	= "tc6393xb",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &tosa_tc6393xb_setup,
+	},
+	.num_resources	= ARRAY_SIZE(tc6393xb_resources),
+	.resource	= tc6393xb_resources,
+};
+
+static struct tosa_bt_data tosa_bt_data = {
+	.gpio_pwr	= TOSA_GPIO_BT_PWR_EN,
+	.gpio_reset	= TOSA_GPIO_BT_RESET,
+};
+
+static struct platform_device tosa_bt_device = {
+	.name	= "tosa-bt",
+	.id	= -1,
+	.dev.platform_data = &tosa_bt_data,
+};
+
+
 static struct platform_device *devices[] __initdata = {
 	&tosascoop_device,
 	&tosascoop_jc_device,
+	&tc6393xb_device,
+	&tosa_power_device,
 	&tosakbd_device,
 	&tosa_gpio_keys_device,
 	&tosaled_device,
+	&tosa_bt_device,
 };
 
 static void tosa_poweroff(void)
 {
-	gpio_direction_output(TOSA_GPIO_ON_RESET, 0);
-	gpio_set_value(TOSA_GPIO_ON_RESET, 1);
-
-	mdelay(1000);
-	arm_machine_restart('h');
+	arm_machine_restart('g');
 }
 
 static void tosa_restart(char mode)
@@ -485,10 +772,15 @@ static void tosa_restart(char mode)
 
 static void __init tosa_init(void)
 {
+	int dummy;
+
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(tosa_pin_config));
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(tosa_pin_irda_off));
 	gpio_set_wake(MFP_PIN_GPIO1, 1);
 	/* We can't pass to gpio-keys since it will drop the Reset altfunc */
 
+	init_gpio_reset(TOSA_GPIO_ON_RESET);
+
 	pm_power_off = tosa_poweroff;
 	arm_pm_restart = tosa_restart;
 
@@ -497,6 +789,10 @@ static void __init tosa_init(void)
 	/* enable batt_fault */
 	PMCR = 0x01;
 
+	dummy = gpiochip_reserve(TOSA_SCOOP_GPIO_BASE, 12);
+	dummy = gpiochip_reserve(TOSA_SCOOP_JC_GPIO_BASE, 12);
+	dummy = gpiochip_reserve(TOSA_TC6393XB_GPIO_BASE, 16);
+
 	pxa_set_mci_info(&tosa_mci_platform_data);
 	pxa_set_udc_info(&udc_info);
 	pxa_set_ficp_info(&tosa_ficp_platform_data);
diff --git a/drivers/input/keyboard/tosakbd.c b/drivers/input/keyboard/tosakbd.c
index 94e444b..b12b7ee 100644
--- a/drivers/input/keyboard/tosakbd.c
+++ b/drivers/input/keyboard/tosakbd.c
@@ -215,8 +215,6 @@ static int tosakbd_suspend(struct platform_device *dev, pm_message_t state)
 	unsigned long flags;
 
 	spin_lock_irqsave(&tosakbd->lock, flags);
-	PGSR1 = (PGSR1 & ~TOSA_GPIO_LOW_STROBE_BIT);
-	PGSR2 = (PGSR2 & ~TOSA_GPIO_HIGH_STROBE_BIT);
 	tosakbd->suspended = 1;
 	spin_unlock_irqrestore(&tosakbd->lock, flags);
 
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index ae96bd6..0f6a885 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -5,6 +5,10 @@
 menu "Multifunction device drivers"
 	depends on HAS_IOMEM
 
+config MFD_CORE
+	tristate
+	default n
+
 config MFD_SM501
 	tristate "Support for Silicon Motion SM501"
 	 ---help---
@@ -38,6 +42,13 @@ config HTC_PASIC3
 	  HTC Magician devices, respectively. Actual functionality is
 	  handled by the leds-pasic3 and ds1wm drivers.
 
+config MFD_TC6393XB
+	bool "Support Toshiba TC6393XB"
+	depends on HAVE_GPIO_LIB
+	select MFD_CORE
+	help
+	  Support for Toshiba Mobile IO Controller TC6393XB
+
 endmenu
 
 menu "Multimedia Capabilities Port drivers"
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index eef4e26..33daa2f 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -8,6 +8,10 @@ obj-$(CONFIG_MFD_ASIC3)		+= asic3.o
 obj-$(CONFIG_HTC_EGPIO)		+= htc-egpio.o
 obj-$(CONFIG_HTC_PASIC3)	+= htc-pasic3.o
 
+obj-$(CONFIG_MFD_TC6393XB)	+= tc6393xb.o
+
+obj-$(CONFIG_MFD_CORE)		+= mfd-core.o
+
 obj-$(CONFIG_MCP)		+= mcp-core.o
 obj-$(CONFIG_MCP_SA11X0)	+= mcp-sa11x0.o
 obj-$(CONFIG_MCP_UCB1200)	+= ucb1x00-core.o
diff --git a/drivers/mfd/mfd-core.c b/drivers/mfd/mfd-core.c
new file mode 100644
index 0000000..d7d88ce
--- /dev/null
+++ b/drivers/mfd/mfd-core.c
@@ -0,0 +1,114 @@
+/*
+ * drivers/mfd/mfd-core.c
+ *
+ * core MFD support
+ * Copyright (c) 2006 Ian Molton
+ * Copyright (c) 2007,2008 Dmitry Baryshkov
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/core.h>
+
+static int mfd_add_device(struct platform_device *parent,
+		const struct mfd_cell *cell,
+		struct resource *mem_base,
+		int irq_base)
+{
+	struct resource res[cell->num_resources];
+	struct platform_device *pdev;
+	int ret = -ENOMEM;
+	int r;
+
+	pdev = platform_device_alloc(cell->name, parent->id);
+	if (!pdev)
+		goto fail_alloc;
+
+	pdev->dev.parent = &parent->dev;
+
+	ret = platform_device_add_data(pdev,
+			cell, sizeof(struct mfd_cell));
+	if (ret)
+		goto fail_device;
+
+	memzero(res, sizeof(res));
+	for (r = 0; r < cell->num_resources; r++) {
+		res[r].name = cell->resources[r].name;
+		res[r].flags = cell->resources[r].flags;
+
+		/* Find out base to use */
+		if (cell->resources[r].flags & IORESOURCE_MEM) {
+			res[r].parent = mem_base;
+			res[r].start = mem_base->start +
+				cell->resources[r].start;
+			res[r].end = mem_base->start +
+				cell->resources[r].end;
+		} else if (cell->resources[r].flags & IORESOURCE_IRQ) {
+			res[r].start = irq_base +
+				cell->resources[r].start;
+			res[r].end   = irq_base +
+				cell->resources[r].end;
+		} else {
+			res[r].parent = cell->resources[r].parent;
+			res[r].start = cell->resources[r].start;
+			res[r].end   = cell->resources[r].end;
+		}
+	}
+
+	platform_device_add_resources(pdev, res, cell->num_resources);
+
+	ret = platform_device_add(pdev);
+	if (ret)
+		goto fail_device;
+
+	return 0;
+
+/*	platform_device_del(pdev); */
+fail_device:
+	platform_device_put(pdev);
+fail_alloc:
+	return ret;
+}
+
+int mfd_add_devices(
+		struct platform_device *parent,
+		const struct mfd_cell *cells, int n_devs,
+		struct resource *mem_base,
+		int irq_base)
+{
+	int i;
+	int ret = 0;
+
+	for (i = 0; i < n_devs; i++) {
+		ret = mfd_add_device(parent, cells + i, mem_base, irq_base);
+		if (ret)
+			break;
+	}
+
+	if (ret)
+		mfd_remove_devices(parent);
+
+	return ret;
+}
+EXPORT_SYMBOL(mfd_add_devices);
+
+static int mfd_remove_devices_fn(struct device *dev, void *unused)
+{
+	platform_device_unregister(
+			container_of(dev, struct platform_device, dev));
+	return 0;
+}
+
+void mfd_remove_devices(struct platform_device *parent)
+{
+	device_for_each_child(&parent->dev, NULL, mfd_remove_devices_fn);
+}
+EXPORT_SYMBOL(mfd_remove_devices);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Ian Molton, Dmitry Baryshkov");
diff --git a/drivers/mfd/tc6393xb.c b/drivers/mfd/tc6393xb.c
new file mode 100644
index 0000000..2d87501
--- /dev/null
+++ b/drivers/mfd/tc6393xb.c
@@ -0,0 +1,600 @@
+/*
+ * Toshiba TC6393XB SoC support
+ *
+ * Copyright(c) 2005-2006 Chris Humbert
+ * Copyright(c) 2005 Dirk Opfer
+ * Copyright(c) 2005 Ian Molton <spyro@f2s.com>
+ * Copyright(c) 2007 Dmitry Baryshkov
+ *
+ * Based on code written by Sharp/Lineo for 2.4 kernels
+ * Based on locomo.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/fb.h>
+#include <linux/clk.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/tmio.h>
+#include <linux/mfd/tc6393xb.h>
+#include <linux/gpio.h>
+
+#define SCR_REVID	0x08		/* b Revision ID	*/
+#define SCR_ISR		0x50		/* b Interrupt Status	*/
+#define SCR_IMR		0x52		/* b Interrupt Mask	*/
+#define SCR_IRR		0x54		/* b Interrupt Routing	*/
+#define SCR_GPER	0x60		/* w GP Enable		*/
+#define SCR_GPI_SR(i)	(0x64 + (i))	/* b3 GPI Status	*/
+#define SCR_GPI_IMR(i)	(0x68 + (i))	/* b3 GPI INT Mask	*/
+#define SCR_GPI_EDER(i)	(0x6c + (i))	/* b3 GPI Edge Detect Enable */
+#define SCR_GPI_LIR(i)	(0x70 + (i))	/* b3 GPI Level Invert	*/
+#define SCR_GPO_DSR(i)	(0x78 + (i))	/* b3 GPO Data Set	*/
+#define SCR_GPO_DOECR(i) (0x7c + (i))	/* b3 GPO Data OE Control */
+#define SCR_GP_IARCR(i)	(0x80 + (i))	/* b3 GP Internal Active Register Control */
+#define SCR_GP_IARLCR(i) (0x84 + (i))	/* b3 GP INTERNAL Active Register Level Control */
+#define SCR_GPI_BCR(i)	(0x88 + (i))	/* b3 GPI Buffer Control */
+#define SCR_GPA_IARCR	0x8c		/* w GPa Internal Active Register Control */
+#define SCR_GPA_IARLCR	0x90		/* w GPa Internal Active Register Level Control */
+#define SCR_GPA_BCR	0x94		/* w GPa Buffer Control */
+#define SCR_CCR		0x98		/* w Clock Control	*/
+#define SCR_PLL2CR	0x9a		/* w PLL2 Control	*/
+#define SCR_PLL1CR	0x9c		/* l PLL1 Control	*/
+#define SCR_DIARCR	0xa0		/* b Device Internal Active Register Control */
+#define SCR_DBOCR	0xa1		/* b Device Buffer Off Control */
+#define SCR_FER		0xe0		/* b Function Enable	*/
+#define SCR_MCR		0xe4		/* w Mode Control	*/
+#define SCR_CONFIG	0xfc		/* b Configuration Control */
+#define SCR_DEBUG	0xff		/* b Debug		*/
+
+#define SCR_CCR_CK32K	BIT(0)
+#define SCR_CCR_USBCK	BIT(1)
+#define SCR_CCR_UNK1	BIT(4)
+#define SCR_CCR_MCLK_MASK	(7 << 8)
+#define SCR_CCR_MCLK_OFF	(0 << 8)
+#define SCR_CCR_MCLK_12	(1 << 8)
+#define SCR_CCR_MCLK_24	(2 << 8)
+#define SCR_CCR_MCLK_48	(3 << 8)
+#define SCR_CCR_HCLK_MASK	(3 << 12)
+#define SCR_CCR_HCLK_24	(0 << 12)
+#define SCR_CCR_HCLK_48	(1 << 12)
+
+#define SCR_FER_USBEN		BIT(0)	/* USB host enable */
+#define SCR_FER_LCDCVEN		BIT(1)	/* polysilicon TFT enable */
+#define SCR_FER_SLCDEN		BIT(2)	/* SLCD enable */
+
+#define SCR_MCR_RDY_MASK		(3 << 0)
+#define SCR_MCR_RDY_OPENDRAIN	(0 << 0)
+#define SCR_MCR_RDY_TRISTATE	(1 << 0)
+#define SCR_MCR_RDY_PUSHPULL	(2 << 0)
+#define SCR_MCR_RDY_UNK		BIT(2)
+#define SCR_MCR_RDY_EN		BIT(3)
+#define SCR_MCR_INT_MASK		(3 << 4)
+#define SCR_MCR_INT_OPENDRAIN	(0 << 4)
+#define SCR_MCR_INT_TRISTATE	(1 << 4)
+#define SCR_MCR_INT_PUSHPULL	(2 << 4)
+#define SCR_MCR_INT_UNK		BIT(6)
+#define SCR_MCR_INT_EN		BIT(7)
+/* bits 8 - 16 are unknown */
+
+#define TC_GPIO_BIT(i)		(1 << (i & 0x7))
+
+/*--------------------------------------------------------------------------*/
+
+struct tc6393xb {
+	void __iomem		*scr;
+
+	struct gpio_chip	gpio;
+
+	struct clk		*clk; /* 3,6 Mhz */
+
+	spinlock_t		lock; /* protects RMW cycles */
+
+	struct {
+		u8		fer;
+		u16		ccr;
+		u8		gpi_bcr[3];
+		u8		gpo_dsr[3];
+		u8		gpo_doecr[3];
+	} suspend_state;
+
+	struct resource		rscr;
+	struct resource		*iomem;
+	int			irq;
+	int			irq_base;
+};
+
+enum {
+	TC6393XB_CELL_NAND,
+};
+
+/*--------------------------------------------------------------------------*/
+
+static int tc6393xb_nand_enable(struct platform_device *nand)
+{
+	struct platform_device *dev = to_platform_device(nand->dev.parent);
+	struct tc6393xb *tc6393xb = platform_get_drvdata(dev);
+	unsigned long flags;
+
+	spin_lock_irqsave(&tc6393xb->lock, flags);
+
+	/* SMD buffer on */
+	dev_dbg(&dev->dev, "SMD buffer on\n");
+	iowrite8(0xff, tc6393xb->scr + SCR_GPI_BCR(1));
+
+	spin_unlock_irqrestore(&tc6393xb->lock, flags);
+
+	return 0;
+}
+
+static struct resource __devinitdata tc6393xb_nand_resources[] = {
+	{
+		.name	= TMIO_NAND_CONFIG,
+		.start	= 0x0100,
+		.end	= 0x01ff,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.name	= TMIO_NAND_CONTROL,
+		.start	= 0x1000,
+		.end	= 0x1007,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.name	= TMIO_NAND_IRQ,
+		.start	= IRQ_TC6393_NAND,
+		.end	= IRQ_TC6393_NAND,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct mfd_cell __devinitdata tc6393xb_cells[] = {
+	[TC6393XB_CELL_NAND] = {
+		.name = "tmio-nand",
+		.enable = tc6393xb_nand_enable,
+		.num_resources = ARRAY_SIZE(tc6393xb_nand_resources),
+		.resources = tc6393xb_nand_resources,
+	},
+};
+
+/*--------------------------------------------------------------------------*/
+
+static int tc6393xb_gpio_get(struct gpio_chip *chip,
+		unsigned offset)
+{
+	struct tc6393xb *tc6393xb = container_of(chip, struct tc6393xb, gpio);
+
+	/* XXX: does dsr also represent inputs? */
+	return ioread8(tc6393xb->scr + SCR_GPO_DSR(offset / 8))
+		& TC_GPIO_BIT(offset);
+}
+
+static void __tc6393xb_gpio_set(struct gpio_chip *chip,
+		unsigned offset, int value)
+{
+	struct tc6393xb *tc6393xb = container_of(chip, struct tc6393xb, gpio);
+	u8  dsr;
+
+	dsr = ioread8(tc6393xb->scr + SCR_GPO_DSR(offset / 8));
+	if (value)
+		dsr |= TC_GPIO_BIT(offset);
+	else
+		dsr &= ~TC_GPIO_BIT(offset);
+
+	iowrite8(dsr, tc6393xb->scr + SCR_GPO_DSR(offset / 8));
+}
+
+static void tc6393xb_gpio_set(struct gpio_chip *chip,
+		unsigned offset, int value)
+{
+	struct tc6393xb *tc6393xb = container_of(chip, struct tc6393xb, gpio);
+	unsigned long flags;
+
+	spin_lock_irqsave(&tc6393xb->lock, flags);
+
+	__tc6393xb_gpio_set(chip, offset, value);
+
+	spin_unlock_irqrestore(&tc6393xb->lock, flags);
+}
+
+static int tc6393xb_gpio_direction_input(struct gpio_chip *chip,
+			unsigned offset)
+{
+	struct tc6393xb *tc6393xb = container_of(chip, struct tc6393xb, gpio);
+	unsigned long flags;
+	u8 doecr;
+
+	spin_lock_irqsave(&tc6393xb->lock, flags);
+
+	doecr = ioread8(tc6393xb->scr + SCR_GPO_DOECR(offset / 8));
+	doecr &= ~TC_GPIO_BIT(offset);
+	iowrite8(doecr, tc6393xb->scr + SCR_GPO_DOECR(offset / 8));
+
+	spin_unlock_irqrestore(&tc6393xb->lock, flags);
+
+	return 0;
+}
+
+static int tc6393xb_gpio_direction_output(struct gpio_chip *chip,
+			unsigned offset, int value)
+{
+	struct tc6393xb *tc6393xb = container_of(chip, struct tc6393xb, gpio);
+	unsigned long flags;
+	u8 doecr;
+
+	spin_lock_irqsave(&tc6393xb->lock, flags);
+
+	__tc6393xb_gpio_set(chip, offset, value);
+
+	doecr = ioread8(tc6393xb->scr + SCR_GPO_DOECR(offset / 8));
+	doecr |= TC_GPIO_BIT(offset);
+	iowrite8(doecr, tc6393xb->scr + SCR_GPO_DOECR(offset / 8));
+
+	spin_unlock_irqrestore(&tc6393xb->lock, flags);
+
+	return 0;
+}
+
+static int tc6393xb_register_gpio(struct tc6393xb *tc6393xb, int gpio_base)
+{
+	tc6393xb->gpio.label = "tc6393xb";
+	tc6393xb->gpio.base = gpio_base;
+	tc6393xb->gpio.ngpio = 16;
+	tc6393xb->gpio.set = tc6393xb_gpio_set;
+	tc6393xb->gpio.get = tc6393xb_gpio_get;
+	tc6393xb->gpio.direction_input = tc6393xb_gpio_direction_input;
+	tc6393xb->gpio.direction_output = tc6393xb_gpio_direction_output;
+
+	return gpiochip_add(&tc6393xb->gpio);
+}
+
+/*--------------------------------------------------------------------------*/
+
+static void
+tc6393xb_irq(unsigned int irq, struct irq_desc *desc)
+{
+	struct tc6393xb *tc6393xb = get_irq_data(irq);
+	unsigned int isr;
+	unsigned int i, irq_base;
+
+	irq_base = tc6393xb->irq_base;
+
+	while ((isr = ioread8(tc6393xb->scr + SCR_ISR) &
+				~ioread8(tc6393xb->scr + SCR_IMR)))
+		for (i = 0; i < TC6393XB_NR_IRQS; i++) {
+			if (isr & (1 << i))
+				generic_handle_irq(irq_base + i);
+		}
+}
+
+static void tc6393xb_irq_ack(unsigned int irq)
+{
+}
+
+static void tc6393xb_irq_mask(unsigned int irq)
+{
+	struct tc6393xb *tc6393xb = get_irq_chip_data(irq);
+	unsigned long flags;
+	u8 imr;
+
+	spin_lock_irqsave(&tc6393xb->lock, flags);
+	imr = ioread8(tc6393xb->scr + SCR_IMR);
+	imr |= 1 << (irq - tc6393xb->irq_base);
+	iowrite8(imr, tc6393xb->scr + SCR_IMR);
+	spin_unlock_irqrestore(&tc6393xb->lock, flags);
+}
+
+static void tc6393xb_irq_unmask(unsigned int irq)
+{
+	struct tc6393xb *tc6393xb = get_irq_chip_data(irq);
+	unsigned long flags;
+	u8 imr;
+
+	spin_lock_irqsave(&tc6393xb->lock, flags);
+	imr = ioread8(tc6393xb->scr + SCR_IMR);
+	imr &= ~(1 << (irq - tc6393xb->irq_base));
+	iowrite8(imr, tc6393xb->scr + SCR_IMR);
+	spin_unlock_irqrestore(&tc6393xb->lock, flags);
+}
+
+static struct irq_chip tc6393xb_chip = {
+	.name	= "tc6393xb",
+	.ack	= tc6393xb_irq_ack,
+	.mask	= tc6393xb_irq_mask,
+	.unmask	= tc6393xb_irq_unmask,
+};
+
+static void tc6393xb_attach_irq(struct platform_device *dev)
+{
+	struct tc6393xb *tc6393xb = platform_get_drvdata(dev);
+	unsigned int irq, irq_base;
+
+	irq_base = tc6393xb->irq_base;
+
+	for (irq = irq_base; irq < irq_base + TC6393XB_NR_IRQS; irq++) {
+		set_irq_chip(irq, &tc6393xb_chip);
+		set_irq_chip_data(irq, tc6393xb);
+		set_irq_handler(irq, handle_edge_irq);
+		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+	}
+
+	set_irq_type(tc6393xb->irq, IRQT_FALLING);
+	set_irq_data(tc6393xb->irq, tc6393xb);
+	set_irq_chained_handler(tc6393xb->irq, tc6393xb_irq);
+}
+
+static void tc6393xb_detach_irq(struct platform_device *dev)
+{
+	struct tc6393xb *tc6393xb = platform_get_drvdata(dev);
+	unsigned int irq, irq_base;
+
+	set_irq_chained_handler(tc6393xb->irq, NULL);
+	set_irq_data(tc6393xb->irq, NULL);
+
+	irq_base = tc6393xb->irq_base;
+
+	for (irq = irq_base; irq < irq_base + TC6393XB_NR_IRQS; irq++) {
+		set_irq_flags(irq, 0);
+		set_irq_chip(irq, NULL);
+		set_irq_chip_data(irq, NULL);
+	}
+}
+
+/*--------------------------------------------------------------------------*/
+
+static int tc6393xb_hw_init(struct platform_device *dev)
+{
+	struct tc6393xb_platform_data *tcpd = dev->dev.platform_data;
+	struct tc6393xb *tc6393xb = platform_get_drvdata(dev);
+	int i;
+
+	iowrite8(tc6393xb->suspend_state.fer,	tc6393xb->scr + SCR_FER);
+	iowrite16(tcpd->scr_pll2cr,		tc6393xb->scr + SCR_PLL2CR);
+	iowrite16(tc6393xb->suspend_state.ccr,	tc6393xb->scr + SCR_CCR);
+	iowrite16(SCR_MCR_RDY_OPENDRAIN | SCR_MCR_RDY_UNK | SCR_MCR_RDY_EN |
+		  SCR_MCR_INT_OPENDRAIN | SCR_MCR_INT_UNK | SCR_MCR_INT_EN |
+		  BIT(15),			tc6393xb->scr + SCR_MCR);
+	iowrite16(tcpd->scr_gper,		tc6393xb->scr + SCR_GPER);
+	iowrite8(0,				tc6393xb->scr + SCR_IRR);
+	iowrite8(0xbf,				tc6393xb->scr + SCR_IMR);
+
+	for (i = 0; i < 3; i++) {
+		iowrite8(tc6393xb->suspend_state.gpo_dsr[i],
+					tc6393xb->scr + SCR_GPO_DSR(i));
+		iowrite8(tc6393xb->suspend_state.gpo_doecr[i],
+					tc6393xb->scr + SCR_GPO_DOECR(i));
+		iowrite8(tc6393xb->suspend_state.gpi_bcr[i],
+					tc6393xb->scr + SCR_GPI_BCR(i));
+	}
+
+	return 0;
+}
+
+static int __devinit tc6393xb_probe(struct platform_device *dev)
+{
+	struct tc6393xb_platform_data *tcpd = dev->dev.platform_data;
+	struct tc6393xb *tc6393xb;
+	struct resource *iomem;
+	struct resource *rscr;
+	int retval, temp;
+	int i;
+
+	iomem = platform_get_resource(dev, IORESOURCE_MEM, 0);
+	if (!iomem)
+		return -EINVAL;
+
+	tc6393xb = kzalloc(sizeof *tc6393xb, GFP_KERNEL);
+	if (!tc6393xb) {
+		retval = -ENOMEM;
+		goto err_kzalloc;
+	}
+
+	spin_lock_init(&tc6393xb->lock);
+
+	platform_set_drvdata(dev, tc6393xb);
+	tc6393xb->iomem = iomem;
+	tc6393xb->irq = platform_get_irq(dev, 0);
+	tc6393xb->irq_base = tcpd->irq_base;
+
+	tc6393xb->clk = clk_get(&dev->dev, "GPIO27_CLK" /* "CK3P6MI" */);
+	if (IS_ERR(tc6393xb->clk)) {
+		retval = PTR_ERR(tc6393xb->clk);
+		goto err_clk_get;
+	}
+
+	rscr = &tc6393xb->rscr;
+	rscr->name = "tc6393xb-core";
+	rscr->start = iomem->start;
+	rscr->end = iomem->start + 0xff;
+	rscr->flags = IORESOURCE_MEM;
+
+	retval = request_resource(iomem, rscr);
+	if (retval)
+		goto err_request_scr;
+
+	tc6393xb->scr = ioremap(rscr->start, rscr->end - rscr->start + 1);
+	if (!tc6393xb->scr) {
+		retval = -ENOMEM;
+		goto err_ioremap;
+	}
+
+	retval = clk_enable(tc6393xb->clk);
+	if (retval)
+		goto err_clk_enable;
+
+	retval = tcpd->enable(dev);
+	if (retval)
+		goto err_enable;
+
+	tc6393xb->suspend_state.fer = 0;
+	for (i = 0; i < 3; i++) {
+		tc6393xb->suspend_state.gpo_dsr[i] =
+			(tcpd->scr_gpo_dsr >> (8 * i)) & 0xff;
+		tc6393xb->suspend_state.gpo_doecr[i] =
+			(tcpd->scr_gpo_doecr >> (8 * i)) & 0xff;
+	}
+	/*
+	 * It may be necessary to change this back to
+	 * platform-dependant code
+	 */
+	tc6393xb->suspend_state.ccr = SCR_CCR_UNK1 |
+					SCR_CCR_HCLK_48;
+
+	retval = tc6393xb_hw_init(dev);
+	if (retval)
+		goto err_hw_init;
+
+	printk(KERN_INFO "Toshiba tc6393xb revision %d at 0x%08lx, irq %d\n",
+			ioread8(tc6393xb->scr + SCR_REVID),
+			(unsigned long) iomem->start, tc6393xb->irq);
+
+	tc6393xb->gpio.base = -1;
+
+	if (tcpd->gpio_base >= 0) {
+		retval = tc6393xb_register_gpio(tc6393xb, tcpd->gpio_base);
+		if (retval)
+			goto err_gpio_add;
+	}
+
+	if (tc6393xb->irq)
+		tc6393xb_attach_irq(dev);
+
+	tc6393xb_cells[TC6393XB_CELL_NAND].driver_data = tcpd->nand_data;
+
+	retval = mfd_add_devices(dev,
+			tc6393xb_cells, ARRAY_SIZE(tc6393xb_cells),
+			iomem, tcpd->irq_base);
+
+	return 0;
+
+	if (tc6393xb->irq)
+		tc6393xb_detach_irq(dev);
+
+err_gpio_add:
+	if (tc6393xb->gpio.base != -1)
+		temp = gpiochip_remove(&tc6393xb->gpio);
+err_hw_init:
+	tcpd->disable(dev);
+err_clk_enable:
+	clk_disable(tc6393xb->clk);
+err_enable:
+	iounmap(tc6393xb->scr);
+err_ioremap:
+	release_resource(&tc6393xb->rscr);
+err_request_scr:
+	clk_put(tc6393xb->clk);
+err_clk_get:
+	kfree(tc6393xb);
+err_kzalloc:
+	return retval;
+}
+
+static int __devexit tc6393xb_remove(struct platform_device *dev)
+{
+	struct tc6393xb_platform_data *tcpd = dev->dev.platform_data;
+	struct tc6393xb *tc6393xb = platform_get_drvdata(dev);
+	int ret;
+
+	mfd_remove_devices(dev);
+
+	if (tc6393xb->irq)
+		tc6393xb_detach_irq(dev);
+
+	if (tc6393xb->gpio.base != -1) {
+		ret = gpiochip_remove(&tc6393xb->gpio);
+		if (ret) {
+			dev_err(&dev->dev, "Can't remove gpio chip: %d\n", ret);
+			return ret;
+		}
+	}
+
+	ret = tcpd->disable(dev);
+
+	clk_disable(tc6393xb->clk);
+
+	iounmap(tc6393xb->scr);
+
+	release_resource(&tc6393xb->rscr);
+
+	platform_set_drvdata(dev, NULL);
+
+	clk_put(tc6393xb->clk);
+
+	kfree(tc6393xb);
+
+	return ret;
+}
+
+#ifdef CONFIG_PM
+static int tc6393xb_suspend(struct platform_device *dev, pm_message_t state)
+{
+	struct tc6393xb_platform_data *tcpd = dev->dev.platform_data;
+	struct tc6393xb *tc6393xb = platform_get_drvdata(dev);
+	int i;
+
+
+	tc6393xb->suspend_state.ccr = ioread16(tc6393xb->scr + SCR_CCR);
+	tc6393xb->suspend_state.fer = ioread8(tc6393xb->scr + SCR_FER);
+
+	for (i = 0; i < 3; i++) {
+		tc6393xb->suspend_state.gpo_dsr[i] =
+			ioread8(tc6393xb->scr + SCR_GPO_DSR(i));
+		tc6393xb->suspend_state.gpo_doecr[i] =
+			ioread8(tc6393xb->scr + SCR_GPO_DOECR(i));
+		tc6393xb->suspend_state.gpi_bcr[i] =
+			ioread8(tc6393xb->scr + SCR_GPI_BCR(i));
+	}
+
+	return tcpd->suspend(dev);
+}
+
+static int tc6393xb_resume(struct platform_device *dev)
+{
+	struct tc6393xb_platform_data *tcpd = dev->dev.platform_data;
+	int ret = tcpd->resume(dev);
+
+	if (ret)
+		return ret;
+
+	return tc6393xb_hw_init(dev);
+}
+#else
+#define tc6393xb_suspend NULL
+#define tc6393xb_resume NULL
+#endif
+
+static struct platform_driver tc6393xb_driver = {
+	.probe = tc6393xb_probe,
+	.remove = __devexit_p(tc6393xb_remove),
+	.suspend = tc6393xb_suspend,
+	.resume = tc6393xb_resume,
+
+	.driver = {
+		.name = "tc6393xb",
+		.owner = THIS_MODULE,
+	},
+};
+
+static int __init tc6393xb_init(void)
+{
+	return platform_driver_register(&tc6393xb_driver);
+}
+
+static void __exit tc6393xb_exit(void)
+{
+	platform_driver_unregister(&tc6393xb_driver);
+}
+
+subsys_initcall(tc6393xb_init);
+module_exit(tc6393xb_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Ian Molton, Dmitry Baryshkov and Dirk Opfer");
+MODULE_DESCRIPTION("tc6393xb Toshiba Mobile IO Controller");
+MODULE_ALIAS("platform:tc6393xb");
diff --git a/include/asm-arm/arch-pxa/hardware.h b/include/asm-arm/arch-pxa/hardware.h
index b6a8317..09868de 100644
--- a/include/asm-arm/arch-pxa/hardware.h
+++ b/include/asm-arm/arch-pxa/hardware.h
@@ -208,6 +208,11 @@ extern void pxa_gpio_set_value(unsigned gpio, int value);
  */
 extern unsigned int get_memclk_frequency_10khz(void);
 
+/*
+ * register GPIO as reset generator
+ */
+extern int init_gpio_reset(int gpio);
+
 #endif
 
 #if defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI)
diff --git a/include/asm-arm/arch-pxa/irqs.h b/include/asm-arm/arch-pxa/irqs.h
index b6c8fe3..fa05e76 100644
--- a/include/asm-arm/arch-pxa/irqs.h
+++ b/include/asm-arm/arch-pxa/irqs.h
@@ -180,6 +180,7 @@
 #define NR_IRQS			(IRQ_LOCOMO_SPI_TEND + 1)
 #elif defined(CONFIG_ARCH_LUBBOCK) || \
       defined(CONFIG_MACH_LOGICPD_PXA270) || \
+      defined(CONFIG_MACH_TOSA) || \
       defined(CONFIG_MACH_MAINSTONE) || \
       defined(CONFIG_MACH_PCM027) || \
       defined(CONFIG_MACH_MAGICIAN)
diff --git a/include/asm-arm/arch-pxa/system.h b/include/asm-arm/arch-pxa/system.h
index ba7e132..6956fc5 100644
--- a/include/asm-arm/arch-pxa/system.h
+++ b/include/asm-arm/arch-pxa/system.h
@@ -21,19 +21,4 @@ static inline void arch_idle(void)
 }
 
 
-static inline void arch_reset(char mode)
-{
-	if (cpu_is_pxa2xx())
-		RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
-
-	if (mode == 's') {
-		/* Jump into ROM at address 0 */
-		cpu_reset(0);
-	} else {
-		/* Initialize the watchdog and let it fire */
-		OWER = OWER_WME;
-		OSSR = OSSR_M3;
-		OSMR3 = OSCR + 368640;	/* ... in 100 ms */
-	}
-}
-
+void arch_reset(char mode);
diff --git a/include/asm-arm/arch-pxa/tosa.h b/include/asm-arm/arch-pxa/tosa.h
index c5b6fde..a72803f 100644
--- a/include/asm-arm/arch-pxa/tosa.h
+++ b/include/asm-arm/arch-pxa/tosa.h
@@ -25,21 +25,18 @@
  */
 #define TOSA_SCOOP_GPIO_BASE		NR_BUILTIN_GPIO
 #define TOSA_SCOOP_PXA_VCORE1		SCOOP_GPCR_PA11
-#define TOSA_SCOOP_TC6393_REST_IN	SCOOP_GPCR_PA12
+#define TOSA_GPIO_TC6393XB_REST_IN	(TOSA_SCOOP_GPIO_BASE + 1)
 #define TOSA_GPIO_IR_POWERDWN		(TOSA_SCOOP_GPIO_BASE + 2)
 #define TOSA_GPIO_SD_WP			(TOSA_SCOOP_GPIO_BASE + 3)
 #define TOSA_GPIO_PWR_ON		(TOSA_SCOOP_GPIO_BASE + 4)
 #define TOSA_SCOOP_AUD_PWR_ON		SCOOP_GPCR_PA16
-#define TOSA_SCOOP_BT_RESET		SCOOP_GPCR_PA17
-#define TOSA_SCOOP_BT_PWR_EN		SCOOP_GPCR_PA18
+#define TOSA_GPIO_BT_RESET		(TOSA_SCOOP_GPIO_BASE + 6)
+#define TOSA_GPIO_BT_PWR_EN		(TOSA_SCOOP_GPIO_BASE + 7)
 #define TOSA_SCOOP_AC_IN_OL		SCOOP_GPCR_PA19
 
 /* GPIO Direction   1 : output mode / 0:input mode */
-#define TOSA_SCOOP_IO_DIR     ( TOSA_SCOOP_PXA_VCORE1 | TOSA_SCOOP_TC6393_REST_IN | \
-		TOSA_SCOOP_AUD_PWR_ON |\
-		TOSA_SCOOP_BT_RESET | TOSA_SCOOP_BT_PWR_EN )
-/* GPIO out put level when init   1: Hi */
-#define TOSA_SCOOP_IO_OUT     ( TOSA_SCOOP_TC6393_REST_IN )
+#define TOSA_SCOOP_IO_DIR     (TOSA_SCOOP_PXA_VCORE1 | \
+		TOSA_SCOOP_AUD_PWR_ON)
 
 /*
  * SCOOP2 jacket GPIOs
@@ -49,16 +46,34 @@
 #define TOSA_GPIO_NOTE_LED		(TOSA_SCOOP_JC_GPIO_BASE + 1)
 #define TOSA_GPIO_CHRG_ERR_LED		(TOSA_SCOOP_JC_GPIO_BASE + 2)
 #define TOSA_GPIO_USB_PULLUP		(TOSA_SCOOP_JC_GPIO_BASE + 3)
-#define TOSA_SCOOP_JC_TC6393_SUSPEND	SCOOP_GPCR_PA15
-#define TOSA_SCOOP_JC_TC3693_L3V_ON	SCOOP_GPCR_PA16
+#define TOSA_GPIO_TC6393XB_SUSPEND	(TOSA_SCOOP_JC_GPIO_BASE + 4)
+#define TOSA_GPIO_TC6393XB_L3V_ON	(TOSA_SCOOP_JC_GPIO_BASE + 5)
 #define TOSA_SCOOP_JC_WLAN_DETECT	SCOOP_GPCR_PA17
 #define TOSA_GPIO_WLAN_LED		(TOSA_SCOOP_JC_GPIO_BASE + 7)
 #define TOSA_SCOOP_JC_CARD_LIMIT_SEL	SCOOP_GPCR_PA19
 
 /* GPIO Direction   1 : output mode / 0:input mode */
-#define TOSA_SCOOP_JC_IO_DIR ( \
-		TOSA_SCOOP_JC_TC6393_SUSPEND | TOSA_SCOOP_JC_TC3693_L3V_ON | \
-		TOSA_SCOOP_JC_CARD_LIMIT_SEL )
+#define TOSA_SCOOP_JC_IO_DIR (TOSA_SCOOP_JC_CARD_LIMIT_SEL)
+
+/*
+ * TC6393XB GPIOs
+ */
+#define TOSA_TC6393XB_GPIO_BASE		(NR_BUILTIN_GPIO + 2 * 12)
+#define TOSA_TC6393XB_GPIO(i)		(TOSA_TC6393XB_GPIO_BASE + (i))
+#define TOSA_TC6393XB_GPIO_BIT(gpio)	(1 << (gpio - TOSA_TC6393XB_GPIO_BASE))
+
+#define TOSA_GPIO_TG_ON			(TOSA_TC6393XB_GPIO_BASE + 0)
+#define TOSA_GPIO_L_MUTE		(TOSA_TC6393XB_GPIO_BASE + 1)
+#define TOSA_GPIO_BL_C20MA		(TOSA_TC6393XB_GPIO_BASE + 3)
+#define TOSA_GPIO_CARD_VCC_ON		(TOSA_TC6393XB_GPIO_BASE + 4)
+#define TOSA_GPIO_CHARGE_OFF		(TOSA_TC6393XB_GPIO_BASE + 6)
+#define TOSA_GPIO_CHARGE_OFF_JC		(TOSA_TC6393XB_GPIO_BASE + 7)
+#define TOSA_GPIO_BAT0_V_ON		(TOSA_TC6393XB_GPIO_BASE + 9)
+#define TOSA_GPIO_BAT1_V_ON		(TOSA_TC6393XB_GPIO_BASE + 10)
+#define TOSA_GPIO_BU_CHRG_ON		(TOSA_TC6393XB_GPIO_BASE + 11)
+#define TOSA_GPIO_BAT_SW_ON		(TOSA_TC6393XB_GPIO_BASE + 12)
+#define TOSA_GPIO_BAT0_TH_ON		(TOSA_TC6393XB_GPIO_BASE + 14)
+#define TOSA_GPIO_BAT1_TH_ON		(TOSA_TC6393XB_GPIO_BASE + 15)
 
 /*
  * Timing Generator
@@ -84,13 +99,13 @@
 #define TOSA_GPIO_JACKET_DETECT		(7)
 #define TOSA_GPIO_nSD_DETECT		(9)
 #define TOSA_GPIO_nSD_INT		(10)
-#define TOSA_GPIO_TC6393_CLK		(11)
+#define TOSA_GPIO_TC6393XB_CLK		(11)
 #define TOSA_GPIO_BAT1_CRG		(12)
 #define TOSA_GPIO_CF_CD			(13)
 #define TOSA_GPIO_BAT0_CRG		(14)
-#define TOSA_GPIO_TC6393_INT		(15)
+#define TOSA_GPIO_TC6393XB_INT		(15)
 #define TOSA_GPIO_BAT0_LOW		(17)
-#define TOSA_GPIO_TC6393_RDY		(18)
+#define TOSA_GPIO_TC6393XB_RDY		(18)
 #define TOSA_GPIO_ON_RESET		(19)
 #define TOSA_GPIO_EAR_IN		(20)
 #define TOSA_GPIO_CF_IRQ		(21)	/* CF slot0 Ready */
@@ -99,6 +114,7 @@
 #define TOSA_GPIO_TP_INT		(32)	/* Touch Panel pen down interrupt */
 #define TOSA_GPIO_JC_CF_IRQ		(36)	/* CF slot1 Ready */
 #define TOSA_GPIO_BAT_LOCKED		(38)	/* Battery locked */
+#define TOSA_GPIO_IRDA_TX		(47)
 #define TOSA_GPIO_TG_SPI_SCLK		(81)
 #define TOSA_GPIO_TG_SPI_CS		(82)
 #define TOSA_GPIO_TG_SPI_MOSI		(83)
@@ -137,7 +153,7 @@
 #define TOSA_IRQ_GPIO_BAT1_CRG      	IRQ_GPIO(TOSA_GPIO_BAT1_CRG)
 #define TOSA_IRQ_GPIO_CF_CD         	IRQ_GPIO(TOSA_GPIO_CF_CD)
 #define TOSA_IRQ_GPIO_BAT0_CRG      	IRQ_GPIO(TOSA_GPIO_BAT0_CRG)
-#define TOSA_IRQ_GPIO_TC6393_INT    	IRQ_GPIO(TOSA_GPIO_TC6393_INT)
+#define TOSA_IRQ_GPIO_TC6393XB_INT    	IRQ_GPIO(TOSA_GPIO_TC6393XB_INT)
 #define TOSA_IRQ_GPIO_BAT0_LOW      	IRQ_GPIO(TOSA_GPIO_BAT0_LOW)
 #define TOSA_IRQ_GPIO_EAR_IN        	IRQ_GPIO(TOSA_GPIO_EAR_IN)
 #define TOSA_IRQ_GPIO_CF_IRQ        	IRQ_GPIO(TOSA_GPIO_CF_IRQ)
diff --git a/include/asm-arm/arch-pxa/tosa_bt.h b/include/asm-arm/arch-pxa/tosa_bt.h
new file mode 100644
index 0000000..efc3c3d
--- /dev/null
+++ b/include/asm-arm/arch-pxa/tosa_bt.h
@@ -0,0 +1,22 @@
+/*
+ * Tosa bluetooth built-in chip control.
+ *
+ * Later it may be shared with some other platforms.
+ *
+ * Copyright (c) 2008 Dmitry Baryshkov
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#ifndef TOSA_BT_H
+#define TOSA_BT_H
+
+struct tosa_bt_data {
+	int gpio_pwr;
+	int gpio_reset;
+};
+
+#endif
+
diff --git a/include/linux/mfd/core.h b/include/linux/mfd/core.h
new file mode 100644
index 0000000..bb3dd05
--- /dev/null
+++ b/include/linux/mfd/core.h
@@ -0,0 +1,55 @@
+#ifndef MFD_CORE_H
+#define MFD_CORE_H
+/*
+ * drivers/mfd/mfd-core.h
+ *
+ * core MFD support
+ * Copyright (c) 2006 Ian Molton
+ * Copyright (c) 2007 Dmitry Baryshkov
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/platform_device.h>
+
+/*
+ * This struct describes the MFD part ("cell").
+ * After registration the copy of this structure will become the platform data
+ * of the resulting platform_device
+ */
+struct mfd_cell {
+	const char		*name;
+
+	int			(*enable)(struct platform_device *dev);
+	int			(*disable)(struct platform_device *dev);
+	int			(*suspend)(struct platform_device *dev);
+	int			(*resume)(struct platform_device *dev);
+
+	void			*driver_data; /* driver-specific data */
+
+	/*
+	 * This resources can be specified relatievly to the parent device.
+	 * For accessing device you should use resources from device
+	 */
+	int			num_resources;
+	const struct resource	*resources;
+};
+
+static inline struct mfd_cell *
+mfd_get_cell(struct platform_device *pdev)
+{
+	return (struct mfd_cell *)pdev->dev.platform_data;
+}
+
+extern int mfd_add_devices(
+		struct platform_device *parent,
+		const struct mfd_cell *cells, int n_devs,
+		struct resource *mem_base,
+		int irq_base);
+
+extern void mfd_remove_devices(struct platform_device *parent);
+
+#endif
diff --git a/include/linux/mfd/tc6393xb.h b/include/linux/mfd/tc6393xb.h
new file mode 100644
index 0000000..7cc824a
--- /dev/null
+++ b/include/linux/mfd/tc6393xb.h
@@ -0,0 +1,49 @@
+/*
+ * Toshiba TC6393XB SoC support
+ *
+ * Copyright(c) 2005-2006 Chris Humbert
+ * Copyright(c) 2005 Dirk Opfer
+ * Copyright(c) 2005 Ian Molton <spyro@f2s.com>
+ * Copyright(c) 2007 Dmitry Baryshkov
+ *
+ * Based on code written by Sharp/Lineo for 2.4 kernels
+ * Based on locomo.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef TC6393XB_H
+#define TC6393XB_H
+
+/* Also one should provide the CK3P6MI clock */
+struct tc6393xb_platform_data {
+	u16	scr_pll2cr;	/* PLL2 Control */
+	u16	scr_gper;	/* GP Enable */
+	u32	scr_gpo_doecr;	/* GPO Data OE Control */
+	u32	scr_gpo_dsr;	/* GPO Data Set */
+
+	int	(*enable)(struct platform_device *dev);
+	int	(*disable)(struct platform_device *dev);
+	int	(*suspend)(struct platform_device *dev);
+	int	(*resume)(struct platform_device *dev);
+
+	int	irq_base;	/* a base for cascaded irq */
+	int	gpio_base;
+
+	struct tmio_nand_data	*nand_data;
+};
+
+/*
+ * Relative to irq_base
+ */
+#define	IRQ_TC6393_NAND		0
+#define	IRQ_TC6393_MMC		1
+#define	IRQ_TC6393_OHCI		2
+#define	IRQ_TC6393_SERIAL	3
+#define	IRQ_TC6393_FB		4
+
+#define	TC6393XB_NR_IRQS	8
+
+#endif
diff --git a/include/linux/mfd/tmio.h b/include/linux/mfd/tmio.h
new file mode 100644
index 0000000..9438d8c
--- /dev/null
+++ b/include/linux/mfd/tmio.h
@@ -0,0 +1,17 @@
+#ifndef MFD_TMIO_H
+#define MFD_TMIO_H
+
+/*
+ * data for the NAND controller
+ */
+struct tmio_nand_data {
+	struct nand_bbt_descr	*badblock_pattern;
+	struct mtd_partition	*partition;
+	unsigned int		num_partitions;
+};
+
+#define TMIO_NAND_CONFIG	"tmio-nand-config"
+#define TMIO_NAND_CONTROL	"tmio-nand-control"
+#define TMIO_NAND_IRQ		"tmio-nand"
+
+#endif
diff --git a/sound/soc/pxa/Kconfig b/sound/soc/pxa/Kconfig
index 484f883..329b33f 100644
--- a/sound/soc/pxa/Kconfig
+++ b/sound/soc/pxa/Kconfig
@@ -48,6 +48,7 @@ config SND_PXA2XX_SOC_POODLE
 config SND_PXA2XX_SOC_TOSA
 	tristate "SoC AC97 Audio support for Tosa"
 	depends on SND_PXA2XX_SOC && MACH_TOSA
+	depends on MFD_TC6393XB
 	select SND_PXA2XX_SOC_AC97
 	select SND_SOC_WM9712
 	help
diff --git a/sound/soc/pxa/tosa.c b/sound/soc/pxa/tosa.c
index 7346d7e..c1462c4 100644
--- a/sound/soc/pxa/tosa.c
+++ b/sound/soc/pxa/tosa.c
@@ -24,6 +24,7 @@
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/device.h>
+#include <linux/gpio.h>
 
 #include <sound/core.h>
 #include <sound/pcm.h>
@@ -31,7 +32,7 @@
 #include <sound/soc-dapm.h>
 
 #include <asm/mach-types.h>
-#include <asm/hardware/tmio.h>
+#include <asm/arch/tosa.h>
 #include <asm/arch/pxa-regs.h>
 #include <asm/arch/hardware.h>
 #include <asm/arch/audio.h>
@@ -138,10 +139,7 @@ static int tosa_set_spk(struct snd_kcontrol *kcontrol,
 static int tosa_hp_event(struct snd_soc_dapm_widget *w,
 	struct snd_kcontrol *k, int event)
 {
-	if (SND_SOC_DAPM_EVENT_ON(event))
-		set_tc6393_gpio(&tc6393_device.dev,TOSA_TC6393_L_MUTE);
-	else
-		reset_tc6393_gpio(&tc6393_device.dev,TOSA_TC6393_L_MUTE);
+	gpio_set_value(TOSA_GPIO_L_MUTE, SND_SOC_DAPM_EVENT_ON(event) ? 1 :0);
 	return 0;
 }
 
@@ -261,16 +259,28 @@ static int __init tosa_init(void)
 	if (!machine_is_tosa())
 		return -ENODEV;
 
+	ret = gpio_request(TOSA_GPIO_L_MUTE, "Headphone Jack");
+	if (ret)
+		return ret;
+	gpio_direction_output(TOSA_GPIO_L_MUTE, 0);
+
 	tosa_snd_device = platform_device_alloc("soc-audio", -1);
-	if (!tosa_snd_device)
-		return -ENOMEM;
+	if (!tosa_snd_device) {
+		ret = -ENOMEM;
+		goto err_alloc;
+	}
 
 	platform_set_drvdata(tosa_snd_device, &tosa_snd_devdata);
 	tosa_snd_devdata.dev = &tosa_snd_device->dev;
 	ret = platform_device_add(tosa_snd_device);
 
-	if (ret)
-		platform_device_put(tosa_snd_device);
+	if (!ret)
+		return 0;
+
+	platform_device_put(tosa_snd_device);
+
+err_alloc:
+	gpio_free(TOSA_GPIO_L_MUTE);
 
 	return ret;
 }
@@ -278,6 +288,7 @@ static int __init tosa_init(void)
 static void __exit tosa_exit(void)
 {
 	platform_device_unregister(tosa_snd_device);
+	gpio_free(TOSA_GPIO_L_MUTE);
 }
 
 module_init(tosa_init);